[ 0.969875] [drm] Initialized drm 1.1.0 20060810 [ 0.970734] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 0.970994] ACPI: Power Button [PWRB] [ 0.971173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 0.971394] ACPI: Power Button [PWRF] [ 0.973767] [drm] Memory usable by graphics device = 2048M [ 0.973863] [drm] Replacing VGA console driver [ 0.975061] Console: switching to colour dummy device 80x25 [ 0.981069] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.981074] [drm] Driver supports precise vblank timestamp query. [ 0.981140] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.981900] ------------[ cut here ]------------ [ 0.981939] WARNING: CPU: 5 PID: 1342 at include/linux/kref.h:47 drm_framebuffer_reference+0x56/0x5f [drm]() [ 0.981942] Modules linked in: i915(+) button video drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea [ 0.981950] CPU: 5 PID: 1342 Comm: udevd Not tainted 3.19.0-rc7_drm-intel-nightly_9583cb_20150205+ #78 [ 0.981953] Hardware name: Dell Inc. OptiPlex 9020/0DNKMN, BIOS A03 09/17/2013 [ 0.981955] 0000000000000000 0000000000000009 ffffffff8179a69b 0000000000000000 [ 0.981958] ffffffff8103bdec 0000000000001000 ffffffffa0017ff3 ffff880119697000 [ 0.981970] ffff880002e39180 0000000000000001 0000000000000003 0000000000000002 [ 0.981973] Call Trace: [ 0.981977] [] ? dump_stack+0x40/0x50 [ 0.981981] [] ? warn_slowpath_common+0x98/0xb0 [ 0.981984] [] ? drm_framebuffer_reference+0x56/0x5f [drm] [ 0.981988] [] ? drm_framebuffer_reference+0x56/0x5f [drm] [ 0.982022] [] ? intel_modeset_init+0x120c/0x1567 [i915] [ 0.982024] [] ? __setup_irq+0x377/0x41e [ 0.982040] [] ? ironlake_irq_postinstall+0x136/0x16e [i915] [ 0.982059] [] ? i915_driver_load+0xcc4/0xf30 [i915] [ 0.982062] [] ? __wake_up+0x35/0x46 [ 0.982064] [] ? call_usermodehelper_exec+0xeb/0xfa [ 0.982066] [] ? blkdev_ioctl+0x390/0x690 [ 0.982069] [] ? kobject_uevent_env+0x486/0x4c8 [ 0.982071] [] ? devtmpfs_create_node+0xf7/0x10c [ 0.982074] [] ? get_device+0x10/0x1c [ 0.982076] [] ? klist_add_tail+0x1d/0x40 [ 0.982078] [] ? device_add+0x4fd/0x50e [ 0.982082] [] ? drm_dev_register+0x74/0xe6 [drm] [ 0.982086] [] ? drm_get_pci_dev+0xf7/0x1b2 [drm] [ 0.982088] [] ? local_pci_probe+0x36/0x7c [ 0.982090] [] ? pci_device_probe+0xcb/0xef [ 0.982092] [] ? driver_probe_device+0x9d/0x1d5 [ 0.982094] [] ? driver_probe_device+0x1d5/0x1d5 [ 0.982096] [] ? __driver_attach+0x53/0x73 [ 0.982098] [] ? bus_for_each_dev+0x4e/0x7f [ 0.982099] [] ? bus_add_driver+0xe7/0x1cc [ 0.982101] [] ? driver_register+0x82/0xb5 [ 0.982103] [] ? 0xffffffffa0153000 [ 0.982105] [] ? do_one_initcall+0xe2/0x176 [ 0.982108] [] ? kmem_cache_alloc_trace+0x2a/0x104 [ 0.982111] [] ? load_module+0x18c2/0x1bc8 [ 0.982113] [] ? mod_kobject_put+0x42/0x42 [ 0.982115] [] ? SyS_init_module+0x90/0x9b [ 0.982117] [] ? system_call_fastpath+0x12/0x17 [ 0.982119] ---[ end trace 3d67f0f2d3271786 ]--- [ 0.986091] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.986353] acpi device:5e: registered as cooling_device8 [ 0.986434] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 0.986498] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0 [ 1.008910] fbcon: inteldrmfb (fb0) is primary device [ 1.008948] ------------[ cut here ]------------ [ 1.008955] WARNING: CPU: 0 PID: 1081 at drivers/gpu/drm/drm_atomic.c:482 drm_atomic_check_only+0xbc/0x3e1 [drm]() [ 1.008957] Modules linked in: i915 button video drm_kms_helper drm cfbfillrect cfbimgblt cfbcopyarea [ 1.008959] CPU: 0 PID: 1081 Comm: kworker/u16:5 Tainted: G W 3.19.0-rc7_drm-intel-nightly_9583cb_20150205+ #78 [ 1.008960] Hardware name: Dell Inc. OptiPlex 9020/0DNKMN, BIOS A03 09/17/2013 [ 1.008965] Workqueue: events_unbound async_run_entry_fn [ 1.008966] 0000000000000000 0000000000000009 ffffffff8179a69b 0000000000000000 [ 1.008967] ffffffff8103bdec ffff88011a080000 ffffffffa0024dcb 00000000000000d0 [ 1.008967] ffff8800dbbcdc00 ffff8800db6f7800 0000000000000003 ffff880119697000 [ 1.008968] Call Trace: [ 1.008971] [] ? dump_stack+0x40/0x50 [ 1.008974] [] ? warn_slowpath_common+0x98/0xb0 [ 1.008976] [] ? drm_atomic_check_only+0xbc/0x3e1 [drm] [ 1.008979] [] ? drm_atomic_check_only+0xbc/0x3e1 [drm] [ 1.008982] [] ? drm_atomic_commit+0xe/0x4d [drm] [ 1.008985] [] ? drm_atomic_helper_plane_set_property+0x62/0x9c [drm_kms_helper] [ 1.008989] [] ? drm_mode_plane_set_obj_prop+0x22/0x48 [drm] [ 1.008991] [] ? restore_fbdev_mode+0x55/0xc3 [drm_kms_helper] [ 1.008992] [] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x1f/0x56 [drm_kms_helper] [ 1.008994] [] ? drm_fb_helper_set_par+0x2e/0x33 [drm_kms_helper] [ 1.009023] [] ? intel_fb_initial_config+0x4d1/0x4d1 [i915] [ 1.009043] [] ? intel_fbdev_set_par+0x11/0x55 [i915] [ 1.009046] [] ? fbcon_init+0x2ff/0x408 [ 1.009047] [] ? visual_init+0xaf/0x102 [ 1.009048] [] ? do_bind_con_driver+0x1a1/0x2ca [ 1.009050] [] ? do_take_over_console+0x132/0x162 [ 1.009051] [] ? do_fbcon_takeover+0x53/0x96 [ 1.009053] [] ? notifier_call_chain+0x2e/0x59 [ 1.009054] [] ? __blocking_notifier_call_chain+0x43/0x5d [ 1.009055] [] ? register_framebuffer+0x23f/0x29d [ 1.009057] [] ? drm_fb_helper_initial_config+0x252/0x2ef [drm_kms_helper] [ 1.009059] [] ? async_run_entry_fn+0x2d/0xc3 [ 1.009060] [] ? process_one_work+0x1ad/0x31a [ 1.009062] [] ? worker_thread+0x235/0x330 [ 1.009063] [] ? process_scheduled_works+0x25/0x25 [ 1.009064] [] ? kthread+0xc5/0xcd [ 1.009066] [] ? kthread_freezable_should_stop+0x40/0x40 [ 1.009067] [] ? ret_from_fork+0x7c/0xb0 [ 1.009068] [] ? kthread_freezable_should_stop+0x40/0x40 [ 1.009069] ---[ end trace 3d67f0f2d3271787 ]--- [ 1.045658] Console: switching to colour frame buffer device 128x48 [ 1.060095] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.060757] i915 0000:00:02.0: registered panic notifier [ 1.064311] dracut: Starting plymouth daemon [ 1.077033] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.088009] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.191366] usb 3-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.192064] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.192897] hub 3-1:1.0: USB hub found [ 1.193614] hub 3-1:1.0: 6 ports detected [ 1.197293] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.198320] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops update_polyphase_filter [i915]) [ 1.199330] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) [ 1.199406] e1000e 0000:00:19.0 em1: renamed from eth0 [ 1.199524] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 1.201602] (20141107/utaddress-258) [ 1.202061] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 1.203684] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.205608] iTCO_vendor_support: vendor-support=0 [ 1.206372] usb 4-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.206373] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.206515] hub 4-1:1.0: USB hub found [ 1.206621] hub 4-1:1.0: 8 ports detected [ 1.208655] sound hdaudioC1D0: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 1.208656] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.208657] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.208658] sound hdaudioC1D0: mono: mono_out=0x0 [ 1.208658] sound hdaudioC1D0: inputs: [ 1.208659] sound hdaudioC1D0: Front Mic=0x1a [ 1.208660] sound hdaudioC1D0: Rear Mic=0x18 [ 1.214308] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 1.215034] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 1.215794] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.287749] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 1.468251] usb 3-1.2: new low-speed USB device number 3 using ehci-pci [ 1.551175] tsc: Refined TSC clocksource calibration: 3392.146 MHz [ 1.559081] dracut: Checking ext4: /dev/sda3 [ 1.560081] dracut: issuing e2fsck -a /dev/sda3 [ 1.620584] dracut: /dev/sda3: clean, 1000002/60538880 files, 28795155/242140160 blocks [ 1.621506] dracut: Remounting /dev/sda3 with -o ro [ 1.636695] usb 3-1.2: New USB device found, idVendor=0557, idProduct=2220 [ 1.637494] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.638281] usb 3-1.2: Product: ATEN CS-1758/54 [ 1.638969] usb 3-1.2: Manufacturer: ATEN [ 1.647308] random: nonblocking pool is initialized [ 1.654570] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 1.672022] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:0557:2220.0001/input/input7 [ 1.698719] dracut: Mounted root filesystem /dev/sda3 [ 1.708558] device-mapper: uevent: version 1.0.3 [ 1.709444] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 1.724335] hid-generic 0003:0557:2220.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1a.0-1.2/input0 [ 1.747738] input: ATEN ATEN CS-1758/54 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:0557:2220.0002/input/input8 [ 1.749574] hid-generic 0003:0557:2220.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1a.0-1.2/input1 [ 1.816356] dracut: Switching root [ 2.256932] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 2.375954] systemd[1]: Failed to insert module 'ipv6' [ 2.386070] systemd[1]: Set hostname to . [ 2.551721] Switched to clocksource tsc [ 2.589935] LVM: Logical Volume autoactivation enabled. [ 2.590831] LVM: Activation generator successfully completed. [ 2.828959] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 2.829876] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.830724] systemd[1]: Starting Syslog Socket. [ 2.832304] systemd[1]: Listening on Syslog Socket. [ 2.833101] systemd[1]: Starting Replay Read-Ahead Data... [ 2.834867] systemd[1]: Starting Collect Read-Ahead Data... [ 2.836654] systemd[1]: Starting Delayed Shutdown Socket. [ 2.838321] systemd[1]: Listening on Delayed Shutdown Socket. [ 2.839144] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 2.840771] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.841599] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 2.843305] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.844285] systemd[1]: Starting Encrypted Volumes. [ 2.845181] systemd-readahead[2525]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 2.845190] systemd-readahead[2526]: Failed to create fanotify object: Function not implemented [ 2.848949] systemd[1]: Reached target Encrypted Volumes. [ 2.849882] systemd[1]: Starting Journal Socket. [ 2.851671] systemd[1]: Listening on Journal Socket. [ 2.852561] systemd[1]: Mounting Huge Pages File System... [ 2.854440] systemd[1]: Mounting Debug File System... [ 2.856314] systemd[1]: Starting Create static device nodes in /dev... [ 2.858112] systemd[1]: Mounting POSIX Message Queue File System... [ 2.859825] systemd[1]: Starting Journal Service... [ 2.862295] systemd[1]: Started Journal Service. [ 2.863142] systemd[1]: Starting udev Kernel Socket. [ 2.864618] systemd[1]: Listening on udev Kernel Socket. [ 2.865382] systemd[1]: Starting udev Control Socket. [ 2.866862] systemd[1]: Listening on udev Control Socket. [ 2.867624] systemd[1]: Starting udev Coldplug all Devices... [ 2.869261] systemd[1]: Starting LVM2 metadata daemon socket. [ 2.985073] systemd[1]: Listening on LVM2 metadata daemon socket. [ 2.985923] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 2.987509] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 2.988319] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 2.990209] systemd[1]: Expecting device dev-disk-by\x2duuid-50f1dcef\x2de289\x2d40be\x2dbc3c\x2d97766928b454.device... [ 2.991932] systemd[1]: Mounting Temporary Directory... [ 3.097494] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 3.098593] systemd[1]: Expecting device dev-disk-by\x2duuid-8ebfad99\x2d4959\x2d4128\x2d9909\x2dde33bcd5dee3.device... [ 3.101553] systemd[1]: Started Replay Read-Ahead Data. [ 3.102487] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 3.104329] systemd[1]: Started Collect Read-Ahead Data. [ 3.105398] systemd[1]: Starting Load legacy module configuration... [ 3.107288] systemd[1]: Starting Setup Virtual Console... [ 3.124889] systemd[1]: Starting Apply Kernel Variables... [ 3.149860] systemd[1]: Started Set Up Additional Binary Formats. [ 3.150673] systemd[1]: Started File System Check on Root Device. [ 3.151494] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.153832] systemd[1]: Started Load Kernel Modules. [ 3.154663] systemd[1]: Mounting FUSE Control File System... [ 3.156458] systemd[1]: Mounted Configuration File System. [ 3.949834] systemd-udevd[3431]: starting version 204 [ 3.987667] EXT4-fs (sda3): re-mounted. Opts: (null) [ 4.957292] e1000e 0000:00:19.0 eno1: renamed from em1 [ 4.969653] systemd-udevd[3461]: renamed network interface em1 to eno1 [ 6.379399] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k [ 8.064662] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.309207] audit: type=1305 audit(1423104566.293:2): audit_pid=3511 old=0 auid=4294967295 ses=4294967295 res=1 [ 8.655855] alsactl[3527]: segfault at 0 ip 0000003820a4888d sp 00007fff8900f290 error 4 in libc-2.17.so[3820a00000+1b5000] [ 13.576837] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 15.483892] systemd-journald[2532]: Received request to flush runtime journal from PID 1 [ 15.825692] Ebtables v2.0 registered [ 15.844821] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.897698] NET: Registered protocol family 10 [ 15.908053] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 64.145064] gem_storedw_batches_loop: executing [ 64.145444] gem_storedw_batches_loop: starting subtest normal [ 64.548037] gem_storedw_batches_loop: exiting, ret=0 [ 96.701536] kms_flip: executing [ 96.716045] kms_flip: starting subtest vblank-vs-suspend-interruptible [ 98.033911] PM: Syncing filesystems ... done. [ 98.064791] PM: Preparing system for mem sleep [ 98.064884] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 98.066081] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 98.067232] PM: Entering mem sleep [ 98.067252] Suspending console(s) (use no_console_suspend to debug) [ 98.067425] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 98.067574] sd 0:0:0:0: [sda] Stopping disk [ 98.102768] serial 00:06: disabled [ 98.102770] serial 00:06: System wakeup disabled by ACPI [ 98.102852] e1000e: EEE TX LPI TIMER: 00000011 [ 98.872888] PM: suspend of devices complete after 805.211 msecs [ 98.885891] PM: late suspend of devices complete after 12.995 msecs [ 98.886155] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 98.886301] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 98.886362] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 98.886382] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 98.896863] PM: noirq suspend of devices complete after 10.966 msecs [ 98.897134] ACPI: Preparing to enter system sleep state S3 [ 98.897272] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 98.897273] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 98.897276] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 98.897278] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 98.897280] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 98.897295] PM: Saving platform NVS memory [ 98.897299] Disabling non-boot CPUs ... [ 98.898480] smpboot: CPU 1 is now offline [ 98.899894] smpboot: CPU 2 is now offline [ 98.901301] smpboot: CPU 3 is now offline [ 98.902699] smpboot: CPU 4 is now offline [ 98.904080] smpboot: CPU 5 is now offline [ 98.904370] Broke affinity for irq 23 [ 98.905388] smpboot: CPU 6 is now offline [ 98.905690] Broke affinity for irq 16 [ 98.905699] Broke affinity for irq 26 [ 98.906714] smpboot: CPU 7 is now offline [ 98.907864] ACPI: Low-level resume complete [ 98.907897] PM: Restoring platform NVS memory [ 98.908188] CPU0: Thermal LVT vector (0xfa) already installed [ 98.908201] Enabling non-boot CPUs ... [ 98.908227] x86: Booting SMP configuration: [ 98.908228] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 98.919366] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 98.920098] CPU1: Thermal LVT vector (0xfa) already installed [ 98.922492] CPU1 is up [ 98.922505] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 98.934388] CPU2: Thermal LVT vector (0xfa) already installed [ 98.936757] CPU2 is up [ 98.936769] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 98.948658] CPU3: Thermal LVT vector (0xfa) already installed [ 98.951014] CPU3 is up [ 98.951025] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 98.962880] CPU4: Thermal LVT vector (0xfa) already installed [ 98.965214] CPU4 is up [ 98.965223] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 98.977075] CPU5: Thermal LVT vector (0xfa) already installed [ 98.979443] CPU5 is up [ 98.979453] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 98.991316] CPU6: Thermal LVT vector (0xfa) already installed [ 98.993636] CPU6 is up [ 98.993646] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 99.005518] CPU7: Thermal LVT vector (0xfa) already installed [ 99.007835] CPU7 is up [ 99.013049] ACPI: Waking up from system sleep state S3 [ 99.013264] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 99.013266] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 99.013269] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 99.013271] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 99.013273] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 99.013275] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 99.014282] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 99.014322] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 99.014357] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 99.024233] PM: noirq resume of devices complete after 10.947 msecs [ 99.026261] PM: early resume of devices complete after 2.009 msecs [ 99.026327] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 99.026447] rtc_cmos 00:02: System wakeup disabled by ACPI [ 99.026695] sd 0:0:0:0: [sda] Starting disk [ 99.026990] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 99.026993] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 99.026995] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 99.026997] serial 00:06: activation failed [ 99.027001] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 99.027001] PM: Device 00:06 failed to resume: error -5 [ 99.166015] hpet1: lost 1 rtc interrupts [ 99.167098] PM: resume of devices complete after 140.776 msecs [ 99.188732] PM: Finishing wakeup. [ 99.188733] Restarting tasks ... done. [ 99.189069] video LNXVIDEO:00: Restoring backlight state [ 99.333324] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 99.335465] ata3.00: configured for UDMA/100 [ 102.186136] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 104.025315] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 104.026966] ata1.00: configured for UDMA/133 [ 105.516335] PM: Syncing filesystems ... done. [ 106.157741] PM: Preparing system for mem sleep [ 106.157832] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 106.159113] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 106.160211] PM: Entering mem sleep [ 106.160223] Suspending console(s) (use no_console_suspend to debug) [ 106.160418] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 106.190543] sd 0:0:0:0: [sda] Stopping disk [ 106.195904] serial 00:06: disabled [ 106.195907] serial 00:06: System wakeup disabled by ACPI [ 106.196040] e1000e: EEE TX LPI TIMER: 00000011 [ 106.995531] PM: suspend of devices complete after 834.880 msecs [ 107.008514] PM: late suspend of devices complete after 12.966 msecs [ 107.008803] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 107.008880] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 107.008913] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 107.008962] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 107.019523] PM: noirq suspend of devices complete after 11.003 msecs [ 107.019771] ACPI: Preparing to enter system sleep state S3 [ 107.019908] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 107.019909] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 107.019912] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 107.019914] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 107.019916] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 107.019931] PM: Saving platform NVS memory [ 107.019935] Disabling non-boot CPUs ... [ 107.021362] smpboot: CPU 1 is now offline [ 107.022659] smpboot: CPU 2 is now offline [ 107.024076] smpboot: CPU 3 is now offline [ 107.025464] smpboot: CPU 4 is now offline [ 107.026844] smpboot: CPU 5 is now offline [ 107.027094] Broke affinity for irq 23 [ 107.028115] smpboot: CPU 6 is now offline [ 107.028375] Broke affinity for irq 16 [ 107.028385] Broke affinity for irq 26 [ 107.029405] smpboot: CPU 7 is now offline [ 107.030541] ACPI: Low-level resume complete [ 107.030575] PM: Restoring platform NVS memory [ 107.030866] CPU0: Thermal LVT vector (0xfa) already installed [ 107.030881] Enabling non-boot CPUs ... [ 107.030907] x86: Booting SMP configuration: [ 107.030907] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 107.042776] CPU1: Thermal LVT vector (0xfa) already installed [ 107.045166] CPU1 is up [ 107.045179] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 107.057059] CPU2: Thermal LVT vector (0xfa) already installed [ 107.059421] CPU2 is up [ 107.059433] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 107.071322] CPU3: Thermal LVT vector (0xfa) already installed [ 107.073686] CPU3 is up [ 107.073698] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 107.085553] CPU4: Thermal LVT vector (0xfa) already installed [ 107.087884] CPU4 is up [ 107.087894] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 107.099745] CPU5: Thermal LVT vector (0xfa) already installed [ 107.102118] CPU5 is up [ 107.102128] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 107.113992] CPU6: Thermal LVT vector (0xfa) already installed [ 107.116309] CPU6 is up [ 107.116318] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 107.128190] CPU7: Thermal LVT vector (0xfa) already installed [ 107.130511] CPU7 is up [ 107.135715] ACPI: Waking up from system sleep state S3 [ 107.135905] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 107.135906] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 107.135909] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 107.135911] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 107.135913] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 107.135915] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 107.136991] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 107.136993] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 107.137015] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 107.146876] PM: noirq resume of devices complete after 10.950 msecs [ 107.148904] PM: early resume of devices complete after 2.008 msecs [ 107.148922] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 107.149019] rtc_cmos 00:02: System wakeup disabled by ACPI [ 107.149214] sd 0:0:0:0: [sda] Starting disk [ 107.149599] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 107.149601] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 107.149603] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 107.149605] serial 00:06: activation failed [ 107.149609] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 107.149610] PM: Device 00:06 failed to resume: error -5 [ 107.300266] PM: resume of devices complete after 151.298 msecs [ 107.321863] PM: Finishing wakeup. [ 107.321864] Restarting tasks ... done. [ 107.322222] video LNXVIDEO:00: Restoring backlight state [ 107.455983] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 107.458110] ata3.00: configured for UDMA/100 [ 110.359787] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 112.096911] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 112.098522] ata1.00: configured for UDMA/133 [ 113.436394] PM: Syncing filesystems ... done. [ 114.278014] PM: Preparing system for mem sleep [ 114.278104] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 114.278832] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 114.279930] PM: Entering mem sleep [ 114.279949] Suspending console(s) (use no_console_suspend to debug) [ 114.280139] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 114.315478] serial 00:06: disabled [ 114.315481] serial 00:06: System wakeup disabled by ACPI [ 114.315574] e1000e: EEE TX LPI TIMER: 00000011 [ 114.335448] sd 0:0:0:0: [sda] Stopping disk [ 115.137207] PM: suspend of devices complete after 856.818 msecs [ 115.148237] PM: late suspend of devices complete after 11.023 msecs [ 115.148526] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 115.148606] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 115.148642] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 115.148695] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 115.159186] PM: noirq suspend of devices complete after 10.943 msecs [ 115.159434] ACPI: Preparing to enter system sleep state S3 [ 115.159567] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 115.159568] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 115.159571] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 115.159573] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 115.159574] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 115.159589] PM: Saving platform NVS memory [ 115.159592] Disabling non-boot CPUs ... [ 115.161021] smpboot: CPU 1 is now offline [ 115.162319] smpboot: CPU 2 is now offline [ 115.163732] smpboot: CPU 3 is now offline [ 115.165126] smpboot: CPU 4 is now offline [ 115.166505] smpboot: CPU 5 is now offline [ 115.166717] Broke affinity for irq 23 [ 115.167739] smpboot: CPU 6 is now offline [ 115.168000] Broke affinity for irq 16 [ 115.168009] Broke affinity for irq 26 [ 115.169032] smpboot: CPU 7 is now offline [ 115.170159] ACPI: Low-level resume complete [ 115.170193] PM: Restoring platform NVS memory [ 115.170483] CPU0: Thermal LVT vector (0xfa) already installed [ 115.170498] Enabling non-boot CPUs ... [ 115.170524] x86: Booting SMP configuration: [ 115.170525] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 115.182396] CPU1: Thermal LVT vector (0xfa) already installed [ 115.184784] CPU1 is up [ 115.184797] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 115.196677] CPU2: Thermal LVT vector (0xfa) already installed [ 115.199045] CPU2 is up [ 115.199057] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 115.210947] CPU3: Thermal LVT vector (0xfa) already installed [ 115.213310] CPU3 is up [ 115.213321] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 115.225176] CPU4: Thermal LVT vector (0xfa) already installed [ 115.227513] CPU4 is up [ 115.227523] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 115.239374] CPU5: Thermal LVT vector (0xfa) already installed [ 115.241744] CPU5 is up [ 115.241753] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 115.253616] CPU6: Thermal LVT vector (0xfa) already installed [ 115.255935] CPU6 is up [ 115.255944] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 115.267816] CPU7: Thermal LVT vector (0xfa) already installed [ 115.270135] CPU7 is up [ 115.275334] ACPI: Waking up from system sleep state S3 [ 115.275522] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 115.275524] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 115.275527] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 115.275529] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 115.275530] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 115.275533] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 115.276640] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 115.276658] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 115.276694] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 115.286540] PM: noirq resume of devices complete after 10.996 msecs [ 115.290570] PM: early resume of devices complete after 4.011 msecs [ 115.290591] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 115.291076] rtc_cmos 00:02: System wakeup disabled by ACPI [ 115.291202] sd 0:0:0:0: [sda] Starting disk [ 115.291590] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 115.291593] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 115.291595] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 115.291597] serial 00:06: activation failed [ 115.291601] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 115.291602] PM: Device 00:06 failed to resume: error -5 [ 115.441886] PM: resume of devices complete after 151.251 msecs [ 115.463531] PM: Finishing wakeup. [ 115.463531] Restarting tasks ... done. [ 115.463921] video LNXVIDEO:00: Restoring backlight state [ 115.596650] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 115.598761] ata3.00: configured for UDMA/100 [ 118.417439] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 120.241623] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 120.243431] ata1.00: configured for UDMA/133 [ 121.583770] PM: Syncing filesystems ... done. [ 122.175171] PM: Preparing system for mem sleep [ 122.175261] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 122.176515] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 122.177496] PM: Entering mem sleep [ 122.177515] Suspending console(s) (use no_console_suspend to debug) [ 122.177714] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 122.213058] serial 00:06: disabled [ 122.213060] serial 00:06: System wakeup disabled by ACPI [ 122.213134] e1000e: EEE TX LPI TIMER: 00000011 [ 122.215764] sd 0:0:0:0: [sda] Stopping disk [ 123.019764] PM: suspend of devices complete after 841.812 msecs [ 123.030824] PM: late suspend of devices complete after 11.041 msecs [ 123.031160] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 123.031236] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 123.031275] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 123.031327] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 123.041746] PM: noirq suspend of devices complete after 10.916 msecs [ 123.041994] ACPI: Preparing to enter system sleep state S3 [ 123.042127] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 123.042129] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 123.042131] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 123.042133] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 123.042135] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 123.042150] PM: Saving platform NVS memory [ 123.042153] Disabling non-boot CPUs ... [ 123.043311] smpboot: CPU 1 is now offline [ 123.044720] smpboot: CPU 2 is now offline [ 123.046124] smpboot: CPU 3 is now offline [ 123.047771] smpboot: CPU 4 is now offline [ 123.049036] smpboot: CPU 5 is now offline [ 123.049231] Broke affinity for irq 23 [ 123.050251] smpboot: CPU 6 is now offline [ 123.050477] Broke affinity for irq 16 [ 123.050489] Broke affinity for irq 26 [ 123.051508] smpboot: CPU 7 is now offline [ 123.052633] ACPI: Low-level resume complete [ 123.052666] PM: Restoring platform NVS memory [ 123.052956] CPU0: Thermal LVT vector (0xfa) already installed [ 123.052971] Enabling non-boot CPUs ... [ 123.053008] x86: Booting SMP configuration: [ 123.053008] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 123.064877] CPU1: Thermal LVT vector (0xfa) already installed [ 123.067271] CPU1 is up [ 123.067283] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 123.079162] CPU2: Thermal LVT vector (0xfa) already installed [ 123.081525] CPU2 is up [ 123.081537] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 123.093425] CPU3: Thermal LVT vector (0xfa) already installed [ 123.095785] CPU3 is up [ 123.095797] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 123.107652] CPU4: Thermal LVT vector (0xfa) already installed [ 123.109988] CPU4 is up [ 123.109998] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 123.121849] CPU5: Thermal LVT vector (0xfa) already installed [ 123.124221] CPU5 is up [ 123.124230] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 123.136093] CPU6: Thermal LVT vector (0xfa) already installed [ 123.138414] CPU6 is up [ 123.138423] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 123.150296] CPU7: Thermal LVT vector (0xfa) already installed [ 123.152615] CPU7 is up [ 123.157818] ACPI: Waking up from system sleep state S3 [ 123.158005] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 123.158006] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 123.158010] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 123.158011] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 123.158013] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 123.158015] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 123.159215] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 123.159242] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 123.159281] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 123.169097] PM: noirq resume of devices complete after 11.071 msecs [ 123.171125] PM: early resume of devices complete after 2.008 msecs [ 123.171171] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 123.171626] rtc_cmos 00:02: System wakeup disabled by ACPI [ 123.171790] sd 0:0:0:0: [sda] Starting disk [ 123.172236] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 123.172239] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 123.172243] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 123.172245] serial 00:06: activation failed [ 123.172249] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 123.172250] PM: Device 00:06 failed to resume: error -5 [ 123.310944] hpet1: lost 1 rtc interrupts [ 123.311973] PM: resume of devices complete after 140.788 msecs [ 123.333605] PM: Finishing wakeup. [ 123.333606] Restarting tasks ... done. [ 123.333903] video LNXVIDEO:00: Restoring backlight state [ 123.335483] kms_flip: exiting, ret=99 [ 123.479207] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 123.481367] ata3.00: configured for UDMA/100 [ 126.280991] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 128.170200] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 128.171865] ata1.00: configured for UDMA/133 [ 142.691485] kms_flip: executing [ 142.705782] kms_flip: starting subtest vblank-vs-suspend-interruptible [ 143.875608] PM: Syncing filesystems ... done. [ 144.062241] PM: Preparing system for mem sleep [ 144.062332] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 144.063537] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 144.064622] PM: Entering mem sleep [ 144.064633] Suspending console(s) (use no_console_suspend to debug) [ 144.064840] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 144.064980] sd 0:0:0:0: [sda] Stopping disk [ 144.100093] serial 00:06: disabled [ 144.100095] serial 00:06: System wakeup disabled by ACPI [ 144.100168] e1000e: EEE TX LPI TIMER: 00000011 [ 144.865218] PM: suspend of devices complete after 800.180 msecs [ 144.878207] PM: late suspend of devices complete after 12.980 msecs [ 144.878578] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 144.878654] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 144.878673] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 144.878736] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 144.889136] PM: noirq suspend of devices complete after 10.912 msecs [ 144.889384] ACPI: Preparing to enter system sleep state S3 [ 144.889515] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 144.889517] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 144.889520] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 144.889521] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 144.889523] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 144.889538] PM: Saving platform NVS memory [ 144.889541] Disabling non-boot CPUs ... [ 144.890711] smpboot: CPU 1 is now offline [ 144.892368] smpboot: CPU 2 is now offline [ 144.893678] smpboot: CPU 3 is now offline [ 144.895326] smpboot: CPU 4 is now offline [ 144.896576] smpboot: CPU 5 is now offline [ 144.896780] Broke affinity for irq 23 [ 144.897805] smpboot: CPU 6 is now offline [ 144.898057] Broke affinity for irq 16 [ 144.898066] Broke affinity for irq 26 [ 144.899087] smpboot: CPU 7 is now offline [ 144.900216] ACPI: Low-level resume complete [ 144.900250] PM: Restoring platform NVS memory [ 144.900541] CPU0: Thermal LVT vector (0xfa) already installed [ 144.900557] Enabling non-boot CPUs ... [ 144.900583] x86: Booting SMP configuration: [ 144.900583] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 144.912452] CPU1: Thermal LVT vector (0xfa) already installed [ 144.914842] CPU1 is up [ 144.914855] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 144.926734] CPU2: Thermal LVT vector (0xfa) already installed [ 144.929101] CPU2 is up [ 144.929114] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 144.941003] CPU3: Thermal LVT vector (0xfa) already installed [ 144.943367] CPU3 is up [ 144.943380] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 144.955234] CPU4: Thermal LVT vector (0xfa) already installed [ 144.957575] CPU4 is up [ 144.957585] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 144.969436] CPU5: Thermal LVT vector (0xfa) already installed [ 144.971807] CPU5 is up [ 144.971816] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 144.983680] CPU6: Thermal LVT vector (0xfa) already installed [ 144.986003] CPU6 is up [ 144.986012] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 144.997888] CPU7: Thermal LVT vector (0xfa) already installed [ 145.000206] CPU7 is up [ 145.005409] ACPI: Waking up from system sleep state S3 [ 145.005598] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 145.005599] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 145.005602] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 145.005604] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 145.005606] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 145.005608] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 145.006612] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 145.006613] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 145.006637] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 145.016493] PM: noirq resume of devices complete after 10.874 msecs [ 145.016782] PM: early resume of devices complete after 0.270 msecs [ 145.016800] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 145.016898] rtc_cmos 00:02: System wakeup disabled by ACPI [ 145.017028] sd 0:0:0:0: [sda] Starting disk [ 145.017425] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 145.017427] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 145.017433] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 145.017434] serial 00:06: activation failed [ 145.017438] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 145.017439] PM: Device 00:06 failed to resume: error -5 [ 145.157328] PM: resume of devices complete after 140.486 msecs [ 145.178892] PM: Finishing wakeup. [ 145.178893] Restarting tasks ... done. [ 145.179182] video LNXVIDEO:00: Restoring backlight state [ 145.323568] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 145.325690] ata3.00: configured for UDMA/100 [ 148.168404] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 150.015595] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 150.017262] ata1.00: configured for UDMA/133 [ 151.333194] PM: Syncing filesystems ... done. [ 151.849377] PM: Preparing system for mem sleep [ 151.849467] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 151.850329] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 151.851427] PM: Entering mem sleep [ 151.851446] Suspending console(s) (use no_console_suspend to debug) [ 151.851677] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 151.886982] serial 00:06: disabled [ 151.886984] serial 00:06: System wakeup disabled by ACPI [ 151.887053] e1000e: EEE TX LPI TIMER: 00000011 [ 151.889429] sd 0:0:0:0: [sda] Stopping disk [ 152.691793] PM: suspend of devices complete after 839.913 msecs [ 152.704709] PM: late suspend of devices complete after 12.908 msecs [ 152.705044] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 152.705052] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 152.705116] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 152.705174] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 152.715671] PM: noirq suspend of devices complete after 10.956 msecs [ 152.715920] ACPI: Preparing to enter system sleep state S3 [ 152.716053] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 152.716055] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 152.716057] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 152.716059] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 152.716061] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 152.716076] PM: Saving platform NVS memory [ 152.716080] Disabling non-boot CPUs ... [ 152.717507] smpboot: CPU 1 is now offline [ 152.719067] smpboot: CPU 2 is now offline [ 152.720362] smpboot: CPU 3 is now offline [ 152.722009] smpboot: CPU 4 is now offline [ 152.723253] smpboot: CPU 5 is now offline [ 152.723450] Broke affinity for irq 23 [ 152.724473] smpboot: CPU 6 is now offline [ 152.724741] Broke affinity for irq 16 [ 152.724750] Broke affinity for irq 26 [ 152.725770] smpboot: CPU 7 is now offline [ 152.726890] ACPI: Low-level resume complete [ 152.726924] PM: Restoring platform NVS memory [ 152.727216] CPU0: Thermal LVT vector (0xfa) already installed [ 152.727232] Enabling non-boot CPUs ... [ 152.727257] x86: Booting SMP configuration: [ 152.727257] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 152.739126] CPU1: Thermal LVT vector (0xfa) already installed [ 152.741518] CPU1 is up [ 152.741530] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 152.753410] CPU2: Thermal LVT vector (0xfa) already installed [ 152.755777] CPU2 is up [ 152.755790] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 152.767679] CPU3: Thermal LVT vector (0xfa) already installed [ 152.770038] CPU3 is up [ 152.770050] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 152.781906] CPU4: Thermal LVT vector (0xfa) already installed [ 152.784235] CPU4 is up [ 152.784245] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 152.796095] CPU5: Thermal LVT vector (0xfa) already installed [ 152.798459] CPU5 is up [ 152.798471] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 152.810334] CPU6: Thermal LVT vector (0xfa) already installed [ 152.812652] CPU6 is up [ 152.812662] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 152.824534] CPU7: Thermal LVT vector (0xfa) already installed [ 152.826854] CPU7 is up [ 152.832057] ACPI: Waking up from system sleep state S3 [ 152.832245] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 152.832247] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 152.832250] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 152.832252] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 152.832253] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 152.832255] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 152.833122] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 152.833149] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 152.833190] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 152.843067] PM: noirq resume of devices complete after 10.801 msecs [ 152.845088] PM: early resume of devices complete after 2.003 msecs [ 152.845148] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 152.845249] rtc_cmos 00:02: System wakeup disabled by ACPI [ 152.845596] sd 0:0:0:0: [sda] Starting disk [ 152.845781] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 152.845783] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 152.845786] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 152.845787] serial 00:06: activation failed [ 152.845792] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 152.845792] PM: Device 00:06 failed to resume: error -5 [ 152.985813] PM: resume of devices complete after 140.665 msecs [ 153.007341] PM: Finishing wakeup. [ 153.007342] Restarting tasks ... done. [ 153.007574] video LNXVIDEO:00: Restoring backlight state [ 153.152140] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 153.154266] ata3.00: configured for UDMA/100 [ 156.016908] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 157.793064] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 157.794877] ata1.00: configured for UDMA/133 [ 159.918682] PM: Syncing filesystems ... done. [ 160.104555] PM: Preparing system for mem sleep [ 160.104645] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 160.105861] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 160.107054] PM: Entering mem sleep [ 160.107074] Suspending console(s) (use no_console_suspend to debug) [ 160.107265] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 160.107426] sd 0:0:0:0: [sda] Stopping disk [ 160.142531] serial 00:06: disabled [ 160.142534] serial 00:06: System wakeup disabled by ACPI [ 160.142622] e1000e: EEE TX LPI TIMER: 00000011 [ 160.907455] PM: suspend of devices complete after 799.953 msecs [ 160.920443] PM: late suspend of devices complete after 12.979 msecs [ 160.920824] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 160.920833] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 160.920896] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 160.920953] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 160.931373] PM: noirq suspend of devices complete after 10.914 msecs [ 160.931622] ACPI: Preparing to enter system sleep state S3 [ 160.931754] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 160.931755] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 160.931758] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 160.931760] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 160.931761] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 160.931776] PM: Saving platform NVS memory [ 160.931780] Disabling non-boot CPUs ... [ 160.932951] smpboot: CPU 1 is now offline [ 160.934351] smpboot: CPU 2 is now offline [ 160.935756] smpboot: CPU 3 is now offline [ 160.937410] smpboot: CPU 4 is now offline [ 160.938683] smpboot: CPU 5 is now offline [ 160.938853] Broke affinity for irq 23 [ 160.939877] smpboot: CPU 6 is now offline [ 160.940132] Broke affinity for irq 16 [ 160.940142] Broke affinity for irq 26 [ 160.941160] smpboot: CPU 7 is now offline [ 160.942292] ACPI: Low-level resume complete [ 160.942325] PM: Restoring platform NVS memory [ 160.942617] CPU0: Thermal LVT vector (0xfa) already installed [ 160.942638] Enabling non-boot CPUs ... [ 160.942663] x86: Booting SMP configuration: [ 160.942664] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 160.954533] CPU1: Thermal LVT vector (0xfa) already installed [ 160.956925] CPU1 is up [ 160.956937] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 160.968817] CPU2: Thermal LVT vector (0xfa) already installed [ 160.971196] CPU2 is up [ 160.971207] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 160.983096] CPU3: Thermal LVT vector (0xfa) already installed [ 160.985457] CPU3 is up [ 160.985469] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 160.997324] CPU4: Thermal LVT vector (0xfa) already installed [ 160.999663] CPU4 is up [ 160.999673] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 161.011524] CPU5: Thermal LVT vector (0xfa) already installed [ 161.013895] CPU5 is up [ 161.013905] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 161.025768] CPU6: Thermal LVT vector (0xfa) already installed [ 161.028091] CPU6 is up [ 161.028100] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 161.039973] CPU7: Thermal LVT vector (0xfa) already installed [ 161.042294] CPU7 is up [ 161.047493] ACPI: Waking up from system sleep state S3 [ 161.047683] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 161.047684] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 161.047688] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 161.047689] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 161.047691] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 161.047693] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 161.048867] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 161.048870] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 161.048895] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 161.058749] PM: noirq resume of devices complete after 11.044 msecs [ 161.059120] PM: early resume of devices complete after 0.300 msecs [ 161.059157] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 161.059631] rtc_cmos 00:02: System wakeup disabled by ACPI [ 161.059769] sd 0:0:0:0: [sda] Starting disk [ 161.060155] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 161.060157] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 161.060160] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 161.060161] serial 00:06: activation failed [ 161.060165] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 161.060166] PM: Device 00:06 failed to resume: error -5 [ 161.184345] PM: resume of devices complete after 125.171 msecs [ 161.205869] PM: Finishing wakeup. [ 161.205870] Restarting tasks ... done. [ 161.206266] video LNXVIDEO:00: Restoring backlight state [ 161.364845] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 161.366921] ata3.00: configured for UDMA/100 [ 164.150590] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 166.060780] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 166.062441] ata1.00: configured for UDMA/133 [ 167.473911] PM: Syncing filesystems ... done. [ 168.181788] PM: Preparing system for mem sleep [ 168.181879] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 168.182789] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 168.183787] PM: Entering mem sleep [ 168.183806] Suspending console(s) (use no_console_suspend to debug) [ 168.183985] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 168.219244] serial 00:06: disabled [ 168.219246] serial 00:06: System wakeup disabled by ACPI [ 168.219423] e1000e: EEE TX LPI TIMER: 00000011 [ 168.221096] sd 0:0:0:0: [sda] Stopping disk [ 169.022096] PM: suspend of devices complete after 837.856 msecs [ 169.035122] PM: late suspend of devices complete after 12.996 msecs [ 169.035455] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 169.035534] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 169.035580] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 169.035644] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 169.046031] PM: noirq suspend of devices complete after 10.903 msecs [ 169.046280] ACPI: Preparing to enter system sleep state S3 [ 169.046412] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 169.046414] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 169.046417] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 169.046418] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 169.046420] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 169.046435] PM: Saving platform NVS memory [ 169.046439] Disabling non-boot CPUs ... [ 169.047864] smpboot: CPU 1 is now offline [ 169.049416] smpboot: CPU 2 is now offline [ 169.050965] smpboot: CPU 3 is now offline [ 169.052271] smpboot: CPU 4 is now offline [ 169.053650] smpboot: CPU 5 is now offline [ 169.053884] Broke affinity for irq 23 [ 169.054909] smpboot: CPU 6 is now offline [ 169.055126] Broke affinity for irq 16 [ 169.055138] Broke affinity for irq 26 [ 169.056162] smpboot: CPU 7 is now offline [ 169.057301] ACPI: Low-level resume complete [ 169.057335] PM: Restoring platform NVS memory [ 169.057626] CPU0: Thermal LVT vector (0xfa) already installed [ 169.057641] Enabling non-boot CPUs ... [ 169.057667] x86: Booting SMP configuration: [ 169.057667] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 169.069541] CPU1: Thermal LVT vector (0xfa) already installed [ 169.071935] CPU1 is up [ 169.071947] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 169.083828] CPU2: Thermal LVT vector (0xfa) already installed [ 169.086197] CPU2 is up [ 169.086209] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 169.098098] CPU3: Thermal LVT vector (0xfa) already installed [ 169.100463] CPU3 is up [ 169.100475] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 169.112329] CPU4: Thermal LVT vector (0xfa) already installed [ 169.114658] CPU4 is up [ 169.114669] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 169.126519] CPU5: Thermal LVT vector (0xfa) already installed [ 169.128891] CPU5 is up [ 169.128901] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 169.140763] CPU6: Thermal LVT vector (0xfa) already installed [ 169.143084] CPU6 is up [ 169.143093] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 169.154965] CPU7: Thermal LVT vector (0xfa) already installed [ 169.157287] CPU7 is up [ 169.162481] ACPI: Waking up from system sleep state S3 [ 169.162670] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 169.162672] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 169.162674] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 169.162676] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 169.162678] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 169.162680] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 169.163501] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 169.163505] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 169.163533] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 169.173384] PM: noirq resume of devices complete after 10.693 msecs [ 169.175441] PM: early resume of devices complete after 1.991 msecs [ 169.175503] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 169.175649] rtc_cmos 00:02: System wakeup disabled by ACPI [ 169.175804] sd 0:0:0:0: [sda] Starting disk [ 169.176217] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 169.176219] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 169.176222] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 169.176223] serial 00:06: activation failed [ 169.176228] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 169.176229] PM: Device 00:06 failed to resume: error -5 [ 169.326778] PM: resume of devices complete after 151.272 msecs [ 169.348241] PM: Finishing wakeup. [ 169.348242] Restarting tasks ... done. [ 169.348477] video LNXVIDEO:00: Restoring backlight state [ 169.349312] kms_flip: exiting, ret=99 [ 169.482493] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 169.484605] ata3.00: configured for UDMA/100 [ 172.307235] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 174.174437] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 174.176099] ata1.00: configured for UDMA/133 [ 290.654501] kms_flip: executing [ 290.668849] kms_flip: starting subtest wf_vblank-ts-check-interruptible [ 321.450911] kms_flip: exiting, ret=0 [ 380.954894] kms_flip: executing [ 380.969072] kms_flip: starting subtest wf_vblank-vs-dpms [ 441.226378] kms_flip: exiting, ret=0 [ 450.313301] kms_flip: executing [ 450.327751] kms_flip: starting subtest wf_vblank-vs-dpms-interruptible [ 510.592245] kms_flip: exiting, ret=0 [ 520.756208] kms_flip: executing [ 520.770479] kms_flip: starting subtest wf_vblank-vs-modeset [ 581.009838] kms_flip: exiting, ret=0 [ 594.145712] kms_flip: executing [ 594.159892] kms_flip: starting subtest wf_vblank-vs-modeset-interruptible [ 654.419340] kms_flip: exiting, ret=0 [ 7140.355311] kms_flip: executing [ 7166.126484] kms_pipe_crc_basic: executing [ 7166.154699] kms_pipe_crc_basic: starting subtest suspend-read-crc-pipe-A [ 7166.666929] PM: Syncing filesystems ... done. [ 7166.731350] PM: Preparing system for mem sleep [ 7166.731441] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7166.732703] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7166.733841] PM: Entering mem sleep [ 7166.733861] Suspending console(s) (use no_console_suspend to debug) [ 7166.734125] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7166.734255] sd 0:0:0:0: [sda] Stopping disk [ 7166.769314] serial 00:06: disabled [ 7166.769316] serial 00:06: System wakeup disabled by ACPI [ 7166.769426] e1000e: EEE TX LPI TIMER: 00000011 [ 7167.539312] PM: suspend of devices complete after 805.031 msecs [ 7167.552366] PM: late suspend of devices complete after 13.037 msecs [ 7167.552673] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7167.552756] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7167.552777] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7167.552839] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7167.563319] PM: noirq suspend of devices complete after 10.947 msecs [ 7167.563568] ACPI: Preparing to enter system sleep state S3 [ 7167.563699] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7167.563700] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7167.563703] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7167.563705] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7167.563706] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7167.563722] PM: Saving platform NVS memory [ 7167.563726] Disabling non-boot CPUs ... [ 7167.564894] smpboot: CPU 1 is now offline [ 7167.566301] smpboot: CPU 2 is now offline [ 7167.567708] smpboot: CPU 3 is now offline [ 7167.569107] smpboot: CPU 4 is now offline [ 7167.570490] smpboot: CPU 5 is now offline [ 7167.570734] Broke affinity for irq 23 [ 7167.571756] smpboot: CPU 6 is now offline [ 7167.572032] Broke affinity for irq 16 [ 7167.572041] Broke affinity for irq 26 [ 7167.573063] smpboot: CPU 7 is now offline [ 7167.574214] ACPI: Low-level resume complete [ 7167.574247] PM: Restoring platform NVS memory [ 7167.574538] CPU0: Thermal LVT vector (0xfa) already installed [ 7167.574548] Enabling non-boot CPUs ... [ 7167.574579] x86: Booting SMP configuration: [ 7167.574580] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7167.586448] CPU1: Thermal LVT vector (0xfa) already installed [ 7167.588847] CPU1 is up [ 7167.588859] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7167.600739] CPU2: Thermal LVT vector (0xfa) already installed [ 7167.603104] CPU2 is up [ 7167.603117] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7167.615006] CPU3: Thermal LVT vector (0xfa) already installed [ 7167.617363] CPU3 is up [ 7167.617375] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7167.629232] CPU4: Thermal LVT vector (0xfa) already installed [ 7167.631563] CPU4 is up [ 7167.631572] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7167.643423] CPU5: Thermal LVT vector (0xfa) already installed [ 7167.645752] CPU5 is up [ 7167.645761] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7167.657625] CPU6: Thermal LVT vector (0xfa) already installed [ 7167.659947] CPU6 is up [ 7167.659956] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7167.671830] CPU7: Thermal LVT vector (0xfa) already installed [ 7167.674149] CPU7 is up [ 7167.679351] ACPI: Waking up from system sleep state S3 [ 7167.679538] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7167.679540] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7167.679543] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7167.679545] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7167.679546] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7167.679549] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7167.679856] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7167.679858] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7167.680688] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7167.689694] PM: noirq resume of devices complete after 10.134 msecs [ 7167.690062] PM: early resume of devices complete after 0.298 msecs [ 7167.690081] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7167.690207] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7167.690544] sd 0:0:0:0: [sda] Starting disk [ 7167.690742] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7167.690744] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7167.690747] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7167.690748] serial 00:06: activation failed [ 7167.690753] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7167.690754] PM: Device 00:06 failed to resume: error -5 [ 7167.815264] PM: resume of devices complete after 125.148 msecs [ 7167.836815] PM: Finishing wakeup. [ 7167.836816] Restarting tasks ... done. [ 7167.837190] video LNXVIDEO:00: Restoring backlight state [ 7167.996776] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7167.998929] ata3.00: configured for UDMA/100 [ 7168.163027] kms_pipe_crc_basic: exiting, ret=0 [ 7170.818575] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7172.637755] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7172.639445] ata1.00: configured for UDMA/133 [ 7189.965684] kms_pipe_crc_basic: executing [ 7189.993838] kms_pipe_crc_basic: starting subtest suspend-read-crc-pipe-B [ 7191.328635] PM: Syncing filesystems ... done. [ 7191.512848] PM: Preparing system for mem sleep [ 7191.512936] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 7191.513603] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7191.514694] PM: Entering mem sleep [ 7191.514714] Suspending console(s) (use no_console_suspend to debug) [ 7191.514931] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7191.515087] sd 0:0:0:0: [sda] Stopping disk [ 7191.550217] serial 00:06: disabled [ 7191.550220] serial 00:06: System wakeup disabled by ACPI [ 7191.550260] e1000e: EEE TX LPI TIMER: 00000011 [ 7192.318994] PM: suspend of devices complete after 803.859 msecs [ 7192.332010] PM: late suspend of devices complete after 13.008 msecs [ 7192.332355] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7192.332437] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7192.332471] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7192.332529] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7192.342945] PM: noirq suspend of devices complete after 10.917 msecs [ 7192.343193] ACPI: Preparing to enter system sleep state S3 [ 7192.343324] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7192.343326] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7192.343329] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7192.343330] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7192.343332] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7192.343347] PM: Saving platform NVS memory [ 7192.343350] Disabling non-boot CPUs ... [ 7192.344504] smpboot: CPU 1 is now offline [ 7192.345917] smpboot: CPU 2 is now offline [ 7192.347323] smpboot: CPU 3 is now offline [ 7192.348721] smpboot: CPU 4 is now offline [ 7192.350097] smpboot: CPU 5 is now offline [ 7192.350325] Broke affinity for irq 23 [ 7192.351348] smpboot: CPU 6 is now offline [ 7192.351570] Broke affinity for irq 16 [ 7192.351584] Broke affinity for irq 26 [ 7192.352607] smpboot: CPU 7 is now offline [ 7192.353740] ACPI: Low-level resume complete [ 7192.353774] PM: Restoring platform NVS memory [ 7192.354066] CPU0: Thermal LVT vector (0xfa) already installed [ 7192.354081] Enabling non-boot CPUs ... [ 7192.354106] x86: Booting SMP configuration: [ 7192.354107] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7192.365976] CPU1: Thermal LVT vector (0xfa) already installed [ 7192.368368] CPU1 is up [ 7192.368380] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7192.380260] CPU2: Thermal LVT vector (0xfa) already installed [ 7192.382623] CPU2 is up [ 7192.382635] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7192.394524] CPU3: Thermal LVT vector (0xfa) already installed [ 7192.396884] CPU3 is up [ 7192.396896] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7192.408751] CPU4: Thermal LVT vector (0xfa) already installed [ 7192.411089] CPU4 is up [ 7192.411099] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7192.422956] CPU5: Thermal LVT vector (0xfa) already installed [ 7192.425321] CPU5 is up [ 7192.425330] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7192.437193] CPU6: Thermal LVT vector (0xfa) already installed [ 7192.439510] CPU6 is up [ 7192.439519] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7192.451391] CPU7: Thermal LVT vector (0xfa) already installed [ 7192.453712] CPU7 is up [ 7192.458918] ACPI: Waking up from system sleep state S3 [ 7192.459109] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7192.459110] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7192.459113] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7192.459115] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7192.459117] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7192.459119] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7192.459420] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7192.460328] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7192.460351] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7192.469315] PM: noirq resume of devices complete after 10.186 msecs [ 7192.473391] PM: early resume of devices complete after 4.046 msecs [ 7192.473479] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7192.473659] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7192.473762] sd 0:0:0:0: [sda] Starting disk [ 7192.474215] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7192.474218] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7192.474221] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7192.474222] serial 00:06: activation failed [ 7192.474227] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7192.474228] PM: Device 00:06 failed to resume: error -5 [ 7192.624627] PM: resume of devices complete after 151.171 msecs [ 7192.646095] PM: Finishing wakeup. [ 7192.646096] Restarting tasks ... done. [ 7192.646339] video LNXVIDEO:00: Restoring backlight state [ 7192.780408] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7192.782533] ata3.00: configured for UDMA/100 [ 7193.012676] kms_pipe_crc_basic: exiting, ret=0 [ 7195.601201] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7197.472353] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7197.474014] ata1.00: configured for UDMA/133 [ 7240.744617] kms_pipe_crc_basic: executing [ 7240.772817] kms_pipe_crc_basic: starting subtest suspend-read-crc-pipe-C [ 7241.138202] PM: Syncing filesystems ... done. [ 7241.201774] PM: Preparing system for mem sleep [ 7241.201864] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 7241.202732] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7241.203734] PM: Entering mem sleep [ 7241.203754] Suspending console(s) (use no_console_suspend to debug) [ 7241.203939] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7241.204100] sd 0:0:0:0: [sda] Stopping disk [ 7241.239120] serial 00:06: disabled [ 7241.239122] serial 00:06: System wakeup disabled by ACPI [ 7241.239194] e1000e: EEE TX LPI TIMER: 00000011 [ 7242.012061] PM: suspend of devices complete after 807.884 msecs [ 7242.025014] PM: late suspend of devices complete after 12.944 msecs [ 7242.025343] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7242.025420] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7242.025458] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7242.025511] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7242.035978] PM: noirq suspend of devices complete after 10.958 msecs [ 7242.036227] ACPI: Preparing to enter system sleep state S3 [ 7242.036359] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7242.036360] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7242.036363] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7242.036365] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7242.036366] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7242.036381] PM: Saving platform NVS memory [ 7242.036385] Disabling non-boot CPUs ... [ 7242.037555] smpboot: CPU 1 is now offline [ 7242.039210] smpboot: CPU 2 is now offline [ 7242.040524] smpboot: CPU 3 is now offline [ 7242.041910] smpboot: CPU 4 is now offline [ 7242.043291] smpboot: CPU 5 is now offline [ 7242.043565] Broke affinity for irq 23 [ 7242.044589] smpboot: CPU 6 is now offline [ 7242.044844] Broke affinity for irq 16 [ 7242.044853] Broke affinity for irq 26 [ 7242.045872] smpboot: CPU 7 is now offline [ 7242.047008] ACPI: Low-level resume complete [ 7242.047042] PM: Restoring platform NVS memory [ 7242.047332] CPU0: Thermal LVT vector (0xfa) already installed [ 7242.047347] Enabling non-boot CPUs ... [ 7242.047373] x86: Booting SMP configuration: [ 7242.047374] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7242.059243] CPU1: Thermal LVT vector (0xfa) already installed [ 7242.061632] CPU1 is up [ 7242.061644] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7242.073524] CPU2: Thermal LVT vector (0xfa) already installed [ 7242.075886] CPU2 is up [ 7242.075898] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7242.087788] CPU3: Thermal LVT vector (0xfa) already installed [ 7242.090142] CPU3 is up [ 7242.090155] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7242.102009] CPU4: Thermal LVT vector (0xfa) already installed [ 7242.104341] CPU4 is up [ 7242.104352] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7242.116203] CPU5: Thermal LVT vector (0xfa) already installed [ 7242.118566] CPU5 is up [ 7242.118576] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7242.130439] CPU6: Thermal LVT vector (0xfa) already installed [ 7242.132755] CPU6 is up [ 7242.132764] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7242.144636] CPU7: Thermal LVT vector (0xfa) already installed [ 7242.146954] CPU7 is up [ 7242.152149] ACPI: Waking up from system sleep state S3 [ 7242.152338] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7242.152340] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7242.152343] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7242.152345] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7242.152346] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7242.152349] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7242.153399] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7242.153420] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7242.153486] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7242.163332] PM: noirq resume of devices complete after 10.973 msecs [ 7242.165361] PM: early resume of devices complete after 2.010 msecs [ 7242.165404] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7242.165482] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7242.165642] sd 0:0:0:0: [sda] Starting disk [ 7242.166010] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7242.166012] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7242.166014] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7242.166016] serial 00:06: activation failed [ 7242.166020] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7242.166021] PM: Device 00:06 failed to resume: error -5 [ 7242.316630] PM: resume of devices complete after 151.204 msecs [ 7242.316716] PM: Finishing wakeup. [ 7242.316717] Restarting tasks ... done. [ 7242.316933] video LNXVIDEO:00: Restoring backlight state [ 7242.470449] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7242.472499] ata3.00: configured for UDMA/100 [ 7242.682700] kms_pipe_crc_basic: exiting, ret=0 [ 7245.314208] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7247.115413] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7247.117081] ata1.00: configured for UDMA/133 [ 7267.356274] kms_plane: executing [ 7267.370704] kms_plane: starting subtest plane-panning-bottom-right-suspend-pipe-B-plane-2 [ 7269.071999] PM: Syncing filesystems ... done. [ 7269.255501] PM: Preparing system for mem sleep [ 7269.255603] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7269.256849] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7269.257628] PM: Entering mem sleep [ 7269.257645] Suspending console(s) (use no_console_suspend to debug) [ 7269.257855] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7269.257987] sd 0:0:0:0: [sda] Stopping disk [ 7269.293052] serial 00:06: disabled [ 7269.293054] serial 00:06: System wakeup disabled by ACPI [ 7269.293140] e1000e: EEE TX LPI TIMER: 00000011 [ 7270.060030] PM: suspend of devices complete after 801.977 msecs [ 7270.073034] PM: late suspend of devices complete after 12.995 msecs [ 7270.073412] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7270.073482] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7270.073502] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7270.073560] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7270.083965] PM: noirq suspend of devices complete after 10.913 msecs [ 7270.084214] ACPI: Preparing to enter system sleep state S3 [ 7270.084346] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7270.084347] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7270.084350] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7270.084352] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7270.084353] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7270.084368] PM: Saving platform NVS memory [ 7270.084372] Disabling non-boot CPUs ... [ 7270.085805] smpboot: CPU 1 is now offline [ 7270.087116] smpboot: CPU 2 is now offline [ 7270.088526] smpboot: CPU 3 is now offline [ 7270.089921] smpboot: CPU 4 is now offline [ 7270.091299] smpboot: CPU 5 is now offline [ 7270.091537] Broke affinity for irq 23 [ 7270.092565] smpboot: CPU 6 is now offline [ 7270.092806] Broke affinity for irq 16 [ 7270.092824] Broke affinity for irq 26 [ 7270.093844] smpboot: CPU 7 is now offline [ 7270.094978] ACPI: Low-level resume complete [ 7270.095012] PM: Restoring platform NVS memory [ 7270.095302] CPU0: Thermal LVT vector (0xfa) already installed [ 7270.095318] Enabling non-boot CPUs ... [ 7270.095342] x86: Booting SMP configuration: [ 7270.095343] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7270.107212] CPU1: Thermal LVT vector (0xfa) already installed [ 7270.109600] CPU1 is up [ 7270.109613] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7270.121493] CPU2: Thermal LVT vector (0xfa) already installed [ 7270.123873] CPU2 is up [ 7270.123886] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7270.135775] CPU3: Thermal LVT vector (0xfa) already installed [ 7270.138132] CPU3 is up [ 7270.138144] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7270.149999] CPU4: Thermal LVT vector (0xfa) already installed [ 7270.152329] CPU4 is up [ 7270.152339] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7270.164190] CPU5: Thermal LVT vector (0xfa) already installed [ 7270.166558] CPU5 is up [ 7270.166568] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7270.178431] CPU6: Thermal LVT vector (0xfa) already installed [ 7270.180749] CPU6 is up [ 7270.180758] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7270.192631] CPU7: Thermal LVT vector (0xfa) already installed [ 7270.194950] CPU7 is up [ 7270.200149] ACPI: Waking up from system sleep state S3 [ 7270.200339] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7270.200340] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7270.200343] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7270.200345] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7270.200347] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7270.200349] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7270.201374] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7270.201442] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7270.201500] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7270.211324] PM: noirq resume of devices complete after 10.964 msecs [ 7270.215351] PM: early resume of devices complete after 4.006 msecs [ 7270.215369] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7270.215465] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7270.215828] sd 0:0:0:0: [sda] Starting disk [ 7270.215976] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7270.215979] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7270.215981] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7270.215983] serial 00:06: activation failed [ 7270.215987] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7270.215988] PM: Device 00:06 failed to resume: error -5 [ 7270.356124] PM: resume of devices complete after 140.713 msecs [ 7270.377677] PM: Finishing wakeup. [ 7270.377678] Restarting tasks ... done. [ 7270.378062] video LNXVIDEO:00: Restoring backlight state [ 7270.522431] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7270.524523] ata3.00: configured for UDMA/100 [ 7273.340182] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7275.163400] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7275.165041] ata1.00: configured for UDMA/133 [ 7275.380398] kms_plane: exiting, ret=78 [ 7280.594568] kms_plane: executing [ 7280.608866] kms_plane: starting subtest plane-panning-bottom-right-suspend-pipe-B-plane-2 [ 7282.243325] PM: Syncing filesystems ... done. [ 7282.426296] PM: Preparing system for mem sleep [ 7282.426433] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7282.427748] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7282.428506] PM: Entering mem sleep [ 7282.428526] Suspending console(s) (use no_console_suspend to debug) [ 7282.428758] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7282.428889] sd 0:0:0:0: [sda] Stopping disk [ 7282.463936] serial 00:06: disabled [ 7282.463939] serial 00:06: System wakeup disabled by ACPI [ 7282.463987] e1000e: EEE TX LPI TIMER: 00000011 [ 7283.230804] PM: suspend of devices complete after 801.858 msecs [ 7283.243803] PM: late suspend of devices complete after 12.989 msecs [ 7283.244170] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7283.244228] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7283.244248] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7283.244306] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7283.254739] PM: noirq suspend of devices complete after 10.919 msecs [ 7283.254988] ACPI: Preparing to enter system sleep state S3 [ 7283.255121] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7283.255122] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7283.255125] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7283.255127] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7283.255128] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7283.255144] PM: Saving platform NVS memory [ 7283.255147] Disabling non-boot CPUs ... [ 7283.256324] smpboot: CPU 1 is now offline [ 7283.257969] smpboot: CPU 2 is now offline [ 7283.259278] smpboot: CPU 3 is now offline [ 7283.260671] smpboot: CPU 4 is now offline [ 7283.262053] smpboot: CPU 5 is now offline [ 7283.262322] Broke affinity for irq 23 [ 7283.263342] smpboot: CPU 6 is now offline [ 7283.263562] Broke affinity for irq 16 [ 7283.263572] Broke affinity for irq 26 [ 7283.264594] smpboot: CPU 7 is now offline [ 7283.265730] ACPI: Low-level resume complete [ 7283.265764] PM: Restoring platform NVS memory [ 7283.266054] CPU0: Thermal LVT vector (0xfa) already installed [ 7283.266072] Enabling non-boot CPUs ... [ 7283.266097] x86: Booting SMP configuration: [ 7283.266097] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7283.277966] CPU1: Thermal LVT vector (0xfa) already installed [ 7283.280354] CPU1 is up [ 7283.280367] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7283.292247] CPU2: Thermal LVT vector (0xfa) already installed [ 7283.294614] CPU2 is up [ 7283.294626] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7283.306516] CPU3: Thermal LVT vector (0xfa) already installed [ 7283.308874] CPU3 is up [ 7283.308886] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7283.320742] CPU4: Thermal LVT vector (0xfa) already installed [ 7283.323070] CPU4 is up [ 7283.323080] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7283.334931] CPU5: Thermal LVT vector (0xfa) already installed [ 7283.337301] CPU5 is up [ 7283.337310] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7283.349172] CPU6: Thermal LVT vector (0xfa) already installed [ 7283.351489] CPU6 is up [ 7283.351498] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7283.363371] CPU7: Thermal LVT vector (0xfa) already installed [ 7283.365689] CPU7 is up [ 7283.370894] ACPI: Waking up from system sleep state S3 [ 7283.371081] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7283.371082] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7283.371085] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7283.371087] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7283.371089] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7283.371091] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7283.372187] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7283.372191] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7283.372212] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7283.382087] PM: noirq resume of devices complete after 10.985 msecs [ 7283.384254] PM: early resume of devices complete after 2.102 msecs [ 7283.384293] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7283.384396] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7283.384894] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7283.384896] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7283.384899] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7283.384901] serial 00:06: activation failed [ 7283.384905] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7283.384906] PM: Device 00:06 failed to resume: error -5 [ 7283.386079] sd 0:0:0:0: [sda] Starting disk [ 7283.534360] hpet1: lost 1 rtc interrupts [ 7283.535338] PM: resume of devices complete after 151.020 msecs [ 7283.556870] PM: Finishing wakeup. [ 7283.556871] Restarting tasks ... done. [ 7283.557076] video LNXVIDEO:00: Restoring backlight state [ 7283.689194] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7283.691319] ata3.00: configured for UDMA/100 [ 7286.520991] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7288.385190] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7288.386818] ata1.00: configured for UDMA/133 [ 7288.559419] kms_plane: exiting, ret=78 [ 7414.318482] kms_plane: executing [ 7414.332724] kms_plane: starting subtest plane-panning-bottom-right-suspend-pipe-C-plane-1 [ 7415.318022] PM: Syncing filesystems ... done. [ 7415.380329] PM: Preparing system for mem sleep [ 7415.380419] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 7415.381333] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7415.382332] PM: Entering mem sleep [ 7415.382352] Suspending console(s) (use no_console_suspend to debug) [ 7415.382540] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7415.382686] sd 0:0:0:0: [sda] Stopping disk [ 7415.417747] serial 00:06: disabled [ 7415.417750] serial 00:06: System wakeup disabled by ACPI [ 7415.417861] e1000e: EEE TX LPI TIMER: 00000011 [ 7416.189636] PM: suspend of devices complete after 806.863 msecs [ 7416.202637] PM: late suspend of devices complete after 12.983 msecs [ 7416.202988] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7416.203061] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7416.203099] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7416.203156] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7416.213568] PM: noirq suspend of devices complete after 10.915 msecs [ 7416.213817] ACPI: Preparing to enter system sleep state S3 [ 7416.213950] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7416.213952] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7416.213955] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7416.213957] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7416.213958] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7416.213973] PM: Saving platform NVS memory [ 7416.213977] Disabling non-boot CPUs ... [ 7416.215147] smpboot: CPU 1 is now offline [ 7416.216540] smpboot: CPU 2 is now offline [ 7416.217952] smpboot: CPU 3 is now offline [ 7416.219349] smpboot: CPU 4 is now offline [ 7416.220731] smpboot: CPU 5 is now offline [ 7416.220962] Broke affinity for irq 23 [ 7416.221984] smpboot: CPU 6 is now offline [ 7416.222221] Broke affinity for irq 16 [ 7416.222231] Broke affinity for irq 26 [ 7416.223263] smpboot: CPU 7 is now offline [ 7416.224409] ACPI: Low-level resume complete [ 7416.224442] PM: Restoring platform NVS memory [ 7416.224733] CPU0: Thermal LVT vector (0xfa) already installed [ 7416.224748] Enabling non-boot CPUs ... [ 7416.224774] x86: Booting SMP configuration: [ 7416.224774] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7416.236643] CPU1: Thermal LVT vector (0xfa) already installed [ 7416.239036] CPU1 is up [ 7416.239049] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7416.250929] CPU2: Thermal LVT vector (0xfa) already installed [ 7416.253308] CPU2 is up [ 7416.253320] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7416.265209] CPU3: Thermal LVT vector (0xfa) already installed [ 7416.267567] CPU3 is up [ 7416.267579] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7416.279434] CPU4: Thermal LVT vector (0xfa) already installed [ 7416.281759] CPU4 is up [ 7416.281769] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7416.293619] CPU5: Thermal LVT vector (0xfa) already installed [ 7416.295992] CPU5 is up [ 7416.296002] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7416.307865] CPU6: Thermal LVT vector (0xfa) already installed [ 7416.310180] CPU6 is up [ 7416.310188] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7416.322061] CPU7: Thermal LVT vector (0xfa) already installed [ 7416.324378] CPU7 is up [ 7416.329578] ACPI: Waking up from system sleep state S3 [ 7416.329766] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7416.329767] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7416.329770] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7416.329772] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7416.329774] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7416.329776] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7416.330252] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7416.330256] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7416.330902] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7416.339949] PM: noirq resume of devices complete after 10.163 msecs [ 7416.344015] PM: early resume of devices complete after 4.047 msecs [ 7416.344107] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7416.344271] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7416.344807] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7416.344809] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7416.344811] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7416.344813] serial 00:06: activation failed [ 7416.344817] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7416.344818] PM: Device 00:06 failed to resume: error -5 [ 7416.344919] sd 0:0:0:0: [sda] Starting disk [ 7416.484714] PM: resume of devices complete after 140.638 msecs [ 7416.506252] PM: Finishing wakeup. [ 7416.506253] Restarting tasks ... done. [ 7416.506611] video LNXVIDEO:00: Restoring backlight state [ 7416.649029] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7416.651154] ata3.00: configured for UDMA/100 [ 7419.520811] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7421.344976] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7421.346639] ata1.00: configured for UDMA/133 [ 7421.508947] kms_plane: exiting, ret=78 [ 7458.115103] kms_plane: executing [ 7458.129385] kms_plane: starting subtest plane-panning-bottom-right-suspend-pipe-C-plane-2 [ 7459.081423] PM: Syncing filesystems ... done. [ 7459.142907] PM: Preparing system for mem sleep [ 7459.142996] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 7459.143885] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7459.144887] PM: Entering mem sleep [ 7459.144906] Suspending console(s) (use no_console_suspend to debug) [ 7459.145087] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7459.145251] sd 0:0:0:0: [sda] Stopping disk [ 7459.180283] serial 00:06: disabled [ 7459.180286] serial 00:06: System wakeup disabled by ACPI [ 7459.180381] e1000e: EEE TX LPI TIMER: 00000011 [ 7459.954144] PM: suspend of devices complete after 808.816 msecs [ 7459.967188] PM: late suspend of devices complete after 13.036 msecs [ 7459.967533] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7459.967609] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7459.967644] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7459.967699] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7459.978122] PM: noirq suspend of devices complete after 10.917 msecs [ 7459.978370] ACPI: Preparing to enter system sleep state S3 [ 7459.978503] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7459.978505] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7459.978508] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7459.978509] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7459.978511] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7459.978526] PM: Saving platform NVS memory [ 7459.978530] Disabling non-boot CPUs ... [ 7459.979699] smpboot: CPU 1 is now offline [ 7459.981101] smpboot: CPU 2 is now offline [ 7459.982504] smpboot: CPU 3 is now offline [ 7459.983900] smpboot: CPU 4 is now offline [ 7459.985281] smpboot: CPU 5 is now offline [ 7459.985524] Broke affinity for irq 23 [ 7459.986550] smpboot: CPU 6 is now offline [ 7459.986809] Broke affinity for irq 16 [ 7459.986819] Broke affinity for irq 26 [ 7459.987838] smpboot: CPU 7 is now offline [ 7459.988964] ACPI: Low-level resume complete [ 7459.988999] PM: Restoring platform NVS memory [ 7459.989290] CPU0: Thermal LVT vector (0xfa) already installed [ 7459.989306] Enabling non-boot CPUs ... [ 7459.989331] x86: Booting SMP configuration: [ 7459.989331] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7460.001200] CPU1: Thermal LVT vector (0xfa) already installed [ 7460.003589] CPU1 is up [ 7460.003602] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7460.015482] CPU2: Thermal LVT vector (0xfa) already installed [ 7460.017846] CPU2 is up [ 7460.017858] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7460.029746] CPU3: Thermal LVT vector (0xfa) already installed [ 7460.032106] CPU3 is up [ 7460.032117] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7460.043973] CPU4: Thermal LVT vector (0xfa) already installed [ 7460.046300] CPU4 is up [ 7460.046310] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7460.058161] CPU5: Thermal LVT vector (0xfa) already installed [ 7460.060534] CPU5 is up [ 7460.060544] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7460.072407] CPU6: Thermal LVT vector (0xfa) already installed [ 7460.074721] CPU6 is up [ 7460.074730] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7460.086603] CPU7: Thermal LVT vector (0xfa) already installed [ 7460.088923] CPU7 is up [ 7460.094118] ACPI: Waking up from system sleep state S3 [ 7460.094304] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7460.094306] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7460.094309] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7460.094311] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7460.094312] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7460.094314] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7460.094620] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7460.095523] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7460.095536] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7460.104512] PM: noirq resume of devices complete after 10.188 msecs [ 7460.110533] PM: early resume of devices complete after 6.001 msecs [ 7460.110628] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7460.110737] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7460.110866] sd 0:0:0:0: [sda] Starting disk [ 7460.111284] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7460.111287] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7460.111289] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7460.111290] serial 00:06: activation failed [ 7460.111296] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7460.111297] PM: Device 00:06 failed to resume: error -5 [ 7460.251157] PM: resume of devices complete after 140.563 msecs [ 7460.272641] PM: Finishing wakeup. [ 7460.272642] Restarting tasks ... done. [ 7460.272834] video LNXVIDEO:00: Restoring backlight state [ 7460.415591] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7460.417717] ata3.00: configured for UDMA/100 [ 7463.208369] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7465.060563] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7465.062337] ata1.00: configured for UDMA/133 [ 7465.275178] kms_plane: exiting, ret=78 [ 7740.460912] kms_plane: executing [ 7740.475203] kms_plane: starting subtest plane-panning-bottom-right-suspend-pipe-C-plane-2 [ 7741.463169] PM: Syncing filesystems ... done. [ 7741.527113] PM: Preparing system for mem sleep [ 7741.527202] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 7741.528100] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 7741.529098] PM: Entering mem sleep [ 7741.529114] Suspending console(s) (use no_console_suspend to debug) [ 7741.529294] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7741.529433] sd 0:0:0:0: [sda] Stopping disk [ 7741.564561] serial 00:06: disabled [ 7741.564563] serial 00:06: System wakeup disabled by ACPI [ 7741.564624] e1000e: EEE TX LPI TIMER: 00000011 [ 7742.335405] PM: suspend of devices complete after 805.881 msecs [ 7742.346447] PM: late suspend of devices complete after 11.035 msecs [ 7742.346796] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 7742.346807] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 7742.346873] e1000e 0000:00:19.0: System wakeup enabled by ACPI [ 7742.346938] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 7742.357407] PM: noirq suspend of devices complete after 10.954 msecs [ 7742.357656] ACPI: Preparing to enter system sleep state S3 [ 7742.357788] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7742.357790] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7742.357792] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOS] (Node ffff88011a09efc8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7742.357794] ACPI Error: Method parse/execution failed [\PTS_] (Node ffff88011a0ad140), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7742.357796] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a0aa4d8), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7742.357810] PM: Saving platform NVS memory [ 7742.357814] Disabling non-boot CPUs ... [ 7742.358983] smpboot: CPU 1 is now offline [ 7742.360379] smpboot: CPU 2 is now offline [ 7742.361790] smpboot: CPU 3 is now offline [ 7742.363439] smpboot: CPU 4 is now offline [ 7742.364735] smpboot: CPU 5 is now offline [ 7742.364926] Broke affinity for irq 23 [ 7742.365946] smpboot: CPU 6 is now offline [ 7742.366236] Broke affinity for irq 16 [ 7742.366246] Broke affinity for irq 26 [ 7742.367267] smpboot: CPU 7 is now offline [ 7742.368428] ACPI: Low-level resume complete [ 7742.368463] PM: Restoring platform NVS memory [ 7742.368755] CPU0: Thermal LVT vector (0xfa) already installed [ 7742.368770] Enabling non-boot CPUs ... [ 7742.368795] x86: Booting SMP configuration: [ 7742.368796] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7742.380664] CPU1: Thermal LVT vector (0xfa) already installed [ 7742.383054] CPU1 is up [ 7742.383067] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 7742.394946] CPU2: Thermal LVT vector (0xfa) already installed [ 7742.397315] CPU2 is up [ 7742.397329] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 7742.409218] CPU3: Thermal LVT vector (0xfa) already installed [ 7742.411578] CPU3 is up [ 7742.411590] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 7742.423445] CPU4: Thermal LVT vector (0xfa) already installed [ 7742.425786] CPU4 is up [ 7742.425796] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 7742.437647] CPU5: Thermal LVT vector (0xfa) already installed [ 7742.440018] CPU5 is up [ 7742.440027] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 7742.451890] CPU6: Thermal LVT vector (0xfa) already installed [ 7742.454210] CPU6 is up [ 7742.454219] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 7742.466092] CPU7: Thermal LVT vector (0xfa) already installed [ 7742.468415] CPU7 is up [ 7742.473618] ACPI: Waking up from system sleep state S3 [ 7742.473808] ACPI Error: Field [PMS1] access width (1 bytes) too large for region [SWCR] (length 0) (20141107/exfldio-189) [ 7742.473810] ACPI Error: Field [PMS1] Base+Offset+Width 2+0+1 is beyond end of region [SWCR] (length 0) (20141107/exfldio-203) [ 7742.473813] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIOW] (Node ffff88011a09f000), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7742.473815] ACPI Error: Method parse/execution failed [\WAK_] (Node ffff88011a0ad168), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7742.473816] ACPI Error: Method parse/execution failed [\_WAK] (Node ffff88011a0aa500), AE_AML_REGION_LIMIT (20141107/psparse-536) [ 7742.473819] ACPI Exception: AE_AML_REGION_LIMIT, While executing method \_WAK (20141107/hwesleep-83) [ 7742.474855] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7742.474885] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 7742.474925] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7742.484763] PM: noirq resume of devices complete after 10.933 msecs [ 7742.485301] PM: early resume of devices complete after 0.518 msecs [ 7742.485391] e1000e 0000:00:19.0: System wakeup disabled by ACPI [ 7742.485736] hpet1: lost 1141 rtc interrupts [ 7742.485834] rtc_cmos 00:02: System wakeup disabled by ACPI [ 7742.485969] sd 0:0:0:0: [sda] Starting disk [ 7742.486355] ACPI Error: Field [DRQL] at 144 exceeds Buffer [NULL] size 128 (bits) (20141107/dsopcode-236) [ 7742.486357] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.SIO1.DSRS] (Node ffff88011a09eeb0), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7742.486360] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.UAR1._SRS] (Node ffff88011a09f550), AE_AML_BUFFER_LIMIT (20141107/psparse-536) [ 7742.486361] serial 00:06: activation failed [ 7742.486365] dpm_run_callback(): pnp_bus_resume+0x0/0x90 returns -5 [ 7742.486366] PM: Device 00:06 failed to resume: error -5 [ 7742.610481] PM: resume of devices complete after 125.126 msecs [ 7742.632039] PM: Finishing wakeup. [ 7742.632040] Restarting tasks ... done. [ 7742.632309] video LNXVIDEO:00: Restoring backlight state [ 7742.792874] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7742.795000] ata3.00: configured for UDMA/100 [ 7745.584653] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7747.484866] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7747.486539] ata1.00: configured for UDMA/133 [ 7747.635025] kms_plane: exiting, ret=78