[  143.351461] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  143.361609] PM: noirq suspend of devices complete after 10.879 msecs
[  143.362270] ACPI: Preparing to enter system sleep state S3
[  143.389871] PM: Saving platform NVS memory
[  143.389910] Disabling non-boot CPUs ...
[  143.391128] smpboot: CPU 1 is now offline
[  143.392916] smpboot: CPU 2 is now offline
[  143.394679] smpboot: CPU 3 is now offline
[  143.397656] ACPI: Low-level resume complete
[  143.397730] PM: Restoring platform NVS memory
[  143.398146] CPU0: Thermal LVT vector (0xfa) already installed
[  143.398168] Enabling non-boot CPUs ...
[  143.398212] x86: Booting SMP configuration:
[  143.398213] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  143.411126] CPU1: Thermal LVT vector (0xfa) already installed
[  143.413904] CPU1 is up
[  143.413935] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  143.426827] CPU2: Thermal LVT vector (0xfa) already installed
[  143.429504] CPU2 is up
[  143.429537] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  143.442461] CPU3: Thermal LVT vector (0xfa) already installed
[  143.445231] CPU3 is up
[  143.452026] ACPI: Waking up from system sleep state S3
[  145.966974] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  145.977569] PM: noirq resume of devices complete after 10.772 msecs
[  145.977698] [drm:hsw_disable_pc8] Disabling package C8+
[  145.983486] [drm:intel_display_power_get] enabling always-on
[  145.983487] [drm:intel_display_power_get] enabling display
[  145.983548] PM: early resume of devices complete after 5.951 msecs
[  145.984023] sd 0:0:0:0: [sda] Starting disk
[  145.984046] rtc_cmos 00:02: System wakeup disabled by ACPI
[  145.986069] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
[  145.986164] [drm:intel_opregion_setup] Public ACPI methods supported
[  145.986166] [drm:intel_opregion_setup] SWSCI supported
[  146.021411] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
[  146.021414] [drm:intel_opregion_setup] ASLE supported
[  146.027459] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  146.027465] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  146.027469] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  146.027473] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  146.027647] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
[  146.027650] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[  146.027652] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
[  146.027655] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[  146.027657] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[  146.027661] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
[  146.027663] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[  146.027666] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
[  146.027668] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[  146.027672] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A
[  146.027673] [drm:intel_dump_pipe_config] cpu_transcoder: A
[  146.027675] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  146.027677] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.027679] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.027681] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  146.027682] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  146.027683] [drm:intel_dump_pipe_config] requested mode:
[  146.027687] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  146.027688] [drm:intel_dump_pipe_config] adjusted mode:
[  146.027690] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  146.027693] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  146.027694] [drm:intel_dump_pipe_config] port clock: 0
[  146.027695] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  146.027697] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  146.027699] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  146.027700] [drm:intel_dump_pipe_config] ips: 0
[  146.027701] [drm:intel_dump_pipe_config] double wide: 0
[  146.027703] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B
[  146.027704] [drm:intel_dump_pipe_config] cpu_transcoder: B
[  146.027705] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  146.027708] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.027709] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.027711] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  146.027712] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  146.027713] [drm:intel_dump_pipe_config] requested mode:
[  146.027716] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  146.027717] [drm:intel_dump_pipe_config] adjusted mode:
[  146.027719] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  146.027722] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  146.027723] [drm:intel_dump_pipe_config] port clock: 0
[  146.027724] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  146.027725] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  146.027727] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  146.027728] [drm:intel_dump_pipe_config] ips: 0
[  146.027729] [drm:intel_dump_pipe_config] double wide: 0
[  146.027731] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C
[  146.027732] [drm:intel_dump_pipe_config] cpu_transcoder: C
[  146.027733] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  146.027735] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.027737] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.027739] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  146.027740] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  146.027741] [drm:intel_dump_pipe_config] requested mode:
[  146.027743] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  146.027744] [drm:intel_dump_pipe_config] adjusted mode:
[  146.027747] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  146.027749] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  146.027750] [drm:intel_dump_pipe_config] port clock: 0
[  146.027751] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  146.027753] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  146.027754] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  146.027755] [drm:intel_dump_pipe_config] ips: 0
[  146.027756] [drm:intel_dump_pipe_config] double wide: 0
[  146.027763] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  146.027766] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  146.027771] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  146.027779] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  146.027780] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  146.027783] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  146.027785] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  146.027786] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  146.027787] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  146.027789] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.027791] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  146.027793] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  146.027794] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  146.027795] [drm:intel_dump_pipe_config] requested mode:
[  146.027799] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  146.027799] [drm:intel_dump_pipe_config] adjusted mode:
[  146.027802] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  146.027805] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  146.027806] [drm:intel_dump_pipe_config] port clock: 540000
[  146.027807] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  146.027809] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  146.027810] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  146.027811] [drm:intel_dump_pipe_config] ips: 1
[  146.027812] [drm:intel_dump_pipe_config] double wide: 0
[  146.027852] [drm:edp_panel_on] Turn eDP port A panel power on
[  146.027854] [drm:wait_panel_power_cycle] Wait for panel power cycle
[  146.027859] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[  146.027860] [drm:wait_panel_status] Wait complete
[  146.027864] [drm:wait_panel_on] Wait for panel power on
[  146.027868] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[  146.236451] [drm:wait_panel_status] Wait complete
[  146.236460] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  146.236468] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  146.237552] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[  146.238179] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[  146.238795] [drm:intel_dp_start_link_train] clock recovery OK
[  146.239720] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[  146.240638] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[  146.240928] [drm:intel_edp_backlight_on] 
[  146.240931] [drm:intel_panel_enable_backlight] pipe A
[  146.240938] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  146.240944] [drm:intel_psr_match_conditions] PSR disable by flag
[  146.240946] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[  146.242506] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  146.275578] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  146.275583] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  146.275586] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  146.275588] [drm:check_crtc_state] [CRTC:20]
[  146.275599] [drm:check_crtc_state] [CRTC:24]
[  146.275601] [drm:check_crtc_state] [CRTC:28]
[  146.275604] [drm:check_shared_dpll_state] WRPLL 1
[  146.275606] [drm:check_shared_dpll_state] WRPLL 2
[  146.275610] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  146.275618] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  146.275621] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  146.275623] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  146.275624] [drm:check_crtc_state] [CRTC:20]
[  146.275634] [drm:check_crtc_state] [CRTC:24]
[  146.275635] [drm:check_crtc_state] [CRTC:28]
[  146.275637] [drm:check_shared_dpll_state] WRPLL 1
[  146.275638] [drm:check_shared_dpll_state] WRPLL 2
[  146.275640] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  146.275645] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  146.275647] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  146.275649] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  146.275651] [drm:check_crtc_state] [CRTC:20]
[  146.275659] [drm:check_crtc_state] [CRTC:24]
[  146.275660] [drm:check_crtc_state] [CRTC:28]
[  146.275662] [drm:check_shared_dpll_state] WRPLL 1
[  146.275663] [drm:check_shared_dpll_state] WRPLL 2
[  146.275666] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  146.275668] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  146.275670] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  146.275671] [drm:check_crtc_state] [CRTC:20]
[  146.275680] [drm:check_crtc_state] [CRTC:24]
[  146.275682] [drm:check_crtc_state] [CRTC:28]
[  146.275683] [drm:check_shared_dpll_state] WRPLL 1
[  146.275684] [drm:check_shared_dpll_state] WRPLL 2
[  146.280060] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[  146.280063] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  146.280065] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  146.280068] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  146.280070] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  146.280074] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  146.280082] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  146.280083] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  146.280086] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  146.280088] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  146.280089] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  146.280090] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  146.280092] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  146.280095] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  146.280097] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  146.280098] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  146.280099] [drm:intel_dump_pipe_config] requested mode:
[  146.280103] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  146.280104] [drm:intel_dump_pipe_config] adjusted mode:
[  146.280106] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  146.280109] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  146.280110] [drm:intel_dump_pipe_config] port clock: 540000
[  146.280112] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  146.280113] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  146.280115] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  146.280116] [drm:intel_dump_pipe_config] ips: 1
[  146.280117] [drm:intel_dump_pipe_config] double wide: 0
[  146.288510] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  146.290533] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  146.290772] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  146.291111] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  146.291282] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  146.291326] ata1.00: configured for UDMA/133
[  146.417016] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
[  146.734204] usb 1-1: reset high-speed USB device number 9 using xhci_hcd
[  147.051399] usb 1-7: reset high-speed USB device number 6 using xhci_hcd
[  147.369600] usb 1-8: reset full-speed USB device number 8 using xhci_hcd
[  147.609839] usb 1-1.4: reset high-speed USB device number 10 using xhci_hcd
[  147.704887] asix 1-1.4:1.0 eth7: unregister 'asix' usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet
[  147.709552] PM: resume of devices complete after 1724.941 msecs
[  147.865491] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  148.472506] asix 1-1.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:98:96
[  148.472964] PM: Finishing wakeup.
[  148.472968] Restarting tasks ... done.
[  148.478696] asix 1-1.4:1.0 eth7: renamed from eth0
[  148.485932] systemd-udevd[5776]: renamed network interface eth0 to eth7
[  149.189323] asix 1-1.4:1.0 eth7: link down
[  149.248400] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  149.248411] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  150.211085] asix 1-1.4:1.0 eth7: link up, 100Mbps, full-duplex, lpa 0xC5E1
[  151.866033] [drm] stuck on render ring
[  151.867236] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [3970], reason: Ring hung, action: reset
[  151.867295] [drm:i915_reset_and_wakeup] resetting chip
[  151.868558] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  151.868737] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  151.868745] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  151.868806] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  151.868817] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  151.868827] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[  151.868892] drm/i915: Resetting chip after gpu hang
[  151.868920] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  151.868929] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  151.868935] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  151.868942] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  151.869010] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  151.870214] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  151.872137] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  151.872633] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  151.872803] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  151.872807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  151.872830] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  151.873160] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  151.873478] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  151.873776] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  151.873938] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  151.873943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  151.873978] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  151.874305] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  151.874627] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  153.867280] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  154.883849] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  154.883863] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  169.064841] PM: Syncing filesystems ... done.
[  169.089119] PM: Preparing system for mem sleep
[  169.089297] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  169.090939] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  169.092284] PM: Entering mem sleep
[  169.092310] Suspending console(s) (use no_console_suspend to debug)
[  169.092683] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  169.092937] sd 0:0:0:0: [sda] Stopping disk
[  169.139483] [drm:intel_edp_backlight_off] 
[  169.340693] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[  169.356719] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  169.356728] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  169.356893] [drm:edp_panel_off] Turn eDP port A panel power off
[  169.356897] [drm:wait_panel_off] Wait for panel power off time
[  169.356901] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[  169.411740] [drm:wait_panel_status] Wait complete
[  169.415763] [drm:intel_display_power_put] disabling display
[  169.415766] [drm:hsw_set_power_well] Requesting to disable the power well
[  169.415768] [drm:intel_display_power_put] disabling always-on
[  169.415833] PM: suspend of devices complete after 323.128 msecs
[  169.416255] [drm:hsw_enable_pc8] Enabling package C8+
[  169.432794] PM: late suspend of devices complete after 16.945 msecs
[  169.433531] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  169.443681] PM: noirq suspend of devices complete after 10.876 msecs
[  169.444343] ACPI: Preparing to enter system sleep state S3
[  169.471940] PM: Saving platform NVS memory
[  169.471980] Disabling non-boot CPUs ...
[  169.473866] smpboot: CPU 1 is now offline
[  169.475372] smpboot: CPU 2 is now offline
[  169.477132] smpboot: CPU 3 is now offline
[  169.480108] ACPI: Low-level resume complete
[  169.480185] PM: Restoring platform NVS memory
[  169.480612] CPU0: Thermal LVT vector (0xfa) already installed
[  169.480635] Enabling non-boot CPUs ...
[  169.480681] x86: Booting SMP configuration:
[  169.480683] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  169.493599] CPU1: Thermal LVT vector (0xfa) already installed
[  169.496381] CPU1 is up
[  169.496411] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  169.509297] CPU2: Thermal LVT vector (0xfa) already installed
[  169.511994] CPU2 is up
[  169.512026] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  169.524950] CPU3: Thermal LVT vector (0xfa) already installed
[  169.527718] CPU3 is up
[  169.534439] ACPI: Waking up from system sleep state S3
[  172.049906] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  172.060655] PM: noirq resume of devices complete after 10.922 msecs
[  172.060753] [drm:hsw_disable_pc8] Disabling package C8+
[  172.066571] [drm:intel_display_power_get] enabling always-on
[  172.066573] [drm:intel_display_power_get] enabling display
[  172.066633] PM: early resume of devices complete after 5.950 msecs
[  172.067175] sd 0:0:0:0: [sda] Starting disk
[  172.067204] rtc_cmos 00:02: System wakeup disabled by ACPI
[  172.069185] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
[  172.069284] [drm:intel_opregion_setup] Public ACPI methods supported
[  172.069285] [drm:intel_opregion_setup] SWSCI supported
[  172.074370] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
[  172.074372] [drm:intel_opregion_setup] ASLE supported
[  172.080412] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  172.080419] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  172.080424] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  172.080428] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  172.080613] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
[  172.080616] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[  172.080619] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
[  172.080623] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[  172.080625] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[  172.080629] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
[  172.080633] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[  172.080636] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
[  172.080640] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[  172.080645] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A
[  172.080646] [drm:intel_dump_pipe_config] cpu_transcoder: A
[  172.080648] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  172.080652] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.080654] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.080657] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  172.080659] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  172.080661] [drm:intel_dump_pipe_config] requested mode:
[  172.080666] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  172.080667] [drm:intel_dump_pipe_config] adjusted mode:
[  172.080671] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  172.080675] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  172.080677] [drm:intel_dump_pipe_config] port clock: 0
[  172.080678] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  172.080681] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  172.080683] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  172.080684] [drm:intel_dump_pipe_config] ips: 0
[  172.080686] [drm:intel_dump_pipe_config] double wide: 0
[  172.080689] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B
[  172.080691] [drm:intel_dump_pipe_config] cpu_transcoder: B
[  172.080693] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  172.080696] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.080698] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.080701] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  172.080703] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  172.080704] [drm:intel_dump_pipe_config] requested mode:
[  172.080708] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  172.080710] [drm:intel_dump_pipe_config] adjusted mode:
[  172.080714] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  172.080717] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  172.080719] [drm:intel_dump_pipe_config] port clock: 0
[  172.080720] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  172.080723] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  172.080725] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  172.080726] [drm:intel_dump_pipe_config] ips: 0
[  172.080728] [drm:intel_dump_pipe_config] double wide: 0
[  172.080731] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C
[  172.080732] [drm:intel_dump_pipe_config] cpu_transcoder: C
[  172.080734] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  172.080737] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.080739] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.080742] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  172.080744] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  172.080745] [drm:intel_dump_pipe_config] requested mode:
[  172.080749] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  172.080750] [drm:intel_dump_pipe_config] adjusted mode:
[  172.080754] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  172.080758] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  172.080759] [drm:intel_dump_pipe_config] port clock: 0
[  172.080761] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  172.080763] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  172.080765] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  172.080767] [drm:intel_dump_pipe_config] ips: 0
[  172.080768] [drm:intel_dump_pipe_config] double wide: 0
[  172.080777] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  172.080780] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  172.080786] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  172.080795] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  172.080797] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  172.080800] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  172.080803] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  172.080804] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  172.080806] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  172.080809] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.080812] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  172.080815] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  172.080817] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  172.080818] [drm:intel_dump_pipe_config] requested mode:
[  172.080823] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  172.080825] [drm:intel_dump_pipe_config] adjusted mode:
[  172.080829] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  172.080834] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  172.080836] [drm:intel_dump_pipe_config] port clock: 540000
[  172.080837] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  172.080840] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  172.080841] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  172.080843] [drm:intel_dump_pipe_config] ips: 1
[  172.080844] [drm:intel_dump_pipe_config] double wide: 0
[  172.080888] [drm:edp_panel_on] Turn eDP port A panel power on
[  172.080891] [drm:wait_panel_power_cycle] Wait for panel power cycle
[  172.080898] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[  172.080900] [drm:wait_panel_status] Wait complete
[  172.080904] [drm:wait_panel_on] Wait for panel power on
[  172.080909] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[  172.289564] [drm:wait_panel_status] Wait complete
[  172.289574] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  172.289583] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  172.290674] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[  172.291300] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[  172.291918] [drm:intel_dp_start_link_train] clock recovery OK
[  172.292843] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[  172.293761] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[  172.294050] [drm:intel_edp_backlight_on] 
[  172.294053] [drm:intel_panel_enable_backlight] pipe A
[  172.294060] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  172.294066] [drm:intel_psr_match_conditions] PSR disable by flag
[  172.294068] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[  172.295528] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  172.328563] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  172.328568] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  172.328570] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  172.328572] [drm:check_crtc_state] [CRTC:20]
[  172.328585] [drm:check_crtc_state] [CRTC:24]
[  172.328587] [drm:check_crtc_state] [CRTC:28]
[  172.328589] [drm:check_shared_dpll_state] WRPLL 1
[  172.328591] [drm:check_shared_dpll_state] WRPLL 2
[  172.328595] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  172.328605] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  172.328608] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  172.328610] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  172.328611] [drm:check_crtc_state] [CRTC:20]
[  172.328619] [drm:check_crtc_state] [CRTC:24]
[  172.328620] [drm:check_crtc_state] [CRTC:28]
[  172.328622] [drm:check_shared_dpll_state] WRPLL 1
[  172.328623] [drm:check_shared_dpll_state] WRPLL 2
[  172.328625] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  172.328630] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  172.328632] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  172.328634] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  172.328635] [drm:check_crtc_state] [CRTC:20]
[  172.328642] [drm:check_crtc_state] [CRTC:24]
[  172.328644] [drm:check_crtc_state] [CRTC:28]
[  172.328646] [drm:check_shared_dpll_state] WRPLL 1
[  172.328647] [drm:check_shared_dpll_state] WRPLL 2
[  172.328651] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  172.328653] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  172.328655] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  172.328656] [drm:check_crtc_state] [CRTC:20]
[  172.328664] [drm:check_crtc_state] [CRTC:24]
[  172.328665] [drm:check_crtc_state] [CRTC:28]
[  172.328667] [drm:check_shared_dpll_state] WRPLL 1
[  172.328668] [drm:check_shared_dpll_state] WRPLL 2
[  172.332787] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[  172.332790] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  172.332793] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  172.332795] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  172.332797] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  172.332802] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  172.332809] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  172.332810] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  172.332813] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  172.332815] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  172.332816] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  172.332817] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  172.332820] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  172.332822] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  172.332824] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  172.332825] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  172.332826] [drm:intel_dump_pipe_config] requested mode:
[  172.332830] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  172.332831] [drm:intel_dump_pipe_config] adjusted mode:
[  172.332833] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  172.332836] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  172.332837] [drm:intel_dump_pipe_config] port clock: 540000
[  172.332838] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  172.332840] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  172.332842] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  172.332843] [drm:intel_dump_pipe_config] ips: 1
[  172.332844] [drm:intel_dump_pipe_config] double wide: 0
[  172.371671] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  172.373793] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  172.374185] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  172.374654] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  172.374924] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  172.374968] ata1.00: configured for UDMA/133
[  172.500089] usb 1-7: reset high-speed USB device number 6 using xhci_hcd
[  172.818298] usb 1-8: reset full-speed USB device number 8 using xhci_hcd
[  173.141495] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
[  173.458675] usb 1-1: reset high-speed USB device number 9 using xhci_hcd
[  173.882659] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  173.898904] usb 1-1.4: reset high-speed USB device number 10 using xhci_hcd
[  173.993713] asix 1-1.4:1.0 eth7: unregister 'asix' usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet
[  173.998779] PM: resume of devices complete after 1930.957 msecs
[  174.761707] asix 1-1.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:98:96
[  174.762160] PM: Finishing wakeup.
[  174.762164] Restarting tasks ... done.
[  174.768384] asix 1-1.4:1.0 eth7: renamed from eth0
[  174.776129] systemd-udevd[5945]: renamed network interface eth0 to eth7
[  175.299464] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  175.299477] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  175.477478] asix 1-1.4:1.0 eth7: link down
[  176.550357] asix 1-1.4:1.0 eth7: link up, 100Mbps, full-duplex, lpa 0xC5E1
[  177.885020] [drm] stuck on render ring
[  177.886175] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [3970], reason: Ring hung, action: reset
[  177.886233] [drm:i915_reset_and_wakeup] resetting chip
[  177.887433] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  177.887614] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  177.887620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  177.887665] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  177.887675] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  177.887686] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[  177.887954] drm/i915: Resetting chip after gpu hang
[  177.887985] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  177.887995] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  177.888001] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  177.888012] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  177.888074] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  177.888175] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  177.890252] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  177.890764] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  177.890957] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  177.890974] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  177.891008] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  177.891342] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  177.891671] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  177.892100] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  177.892270] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  177.892275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  177.892307] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  177.892635] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  177.892966] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  179.886229] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  180.902903] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  180.902915] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  180.978521] PM: Syncing filesystems ... done.
[  181.006549] PM: Preparing system for mem sleep
[  181.006724] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  181.008350] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  181.009693] PM: Entering mem sleep
[  181.009719] Suspending console(s) (use no_console_suspend to debug)
[  181.010322] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  181.042457] sd 0:0:0:0: [sda] Stopping disk
[  181.067901] [drm:intel_edp_backlight_off] 
[  181.269114] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[  181.283128] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  181.283137] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  181.283302] [drm:edp_panel_off] Turn eDP port A panel power off
[  181.283306] [drm:wait_panel_off] Wait for panel power off time
[  181.283311] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000
[  181.338154] [drm:wait_panel_status] Wait complete
[  181.342175] [drm:intel_display_power_put] disabling display
[  181.342179] [drm:hsw_set_power_well] Requesting to disable the power well
[  181.342180] [drm:intel_display_power_put] disabling always-on
[  181.342272] PM: suspend of devices complete after 332.151 msecs
[  181.342696] [drm:hsw_enable_pc8] Enabling package C8+
[  181.359210] PM: late suspend of devices complete after 16.921 msecs
[  181.359913] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  181.370102] PM: noirq suspend of devices complete after 10.882 msecs
[  181.370763] ACPI: Preparing to enter system sleep state S3
[  181.398356] PM: Saving platform NVS memory
[  181.398394] Disabling non-boot CPUs ...
[  181.399609] smpboot: CPU 1 is now offline
[  181.401398] smpboot: CPU 2 is now offline
[  181.403166] smpboot: CPU 3 is now offline
[  181.405846] ACPI: Low-level resume complete
[  181.405918] PM: Restoring platform NVS memory
[  181.406325] CPU0: Thermal LVT vector (0xfa) already installed
[  181.406345] Enabling non-boot CPUs ...
[  181.406386] x86: Booting SMP configuration:
[  181.406388] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  181.419301] CPU1: Thermal LVT vector (0xfa) already installed
[  181.422078] CPU1 is up
[  181.422108] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  181.435005] CPU2: Thermal LVT vector (0xfa) already installed
[  181.437683] CPU2 is up
[  181.437715] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  181.450639] CPU3: Thermal LVT vector (0xfa) already installed
[  181.453407] CPU3 is up
[  181.460134] ACPI: Waking up from system sleep state S3
[  183.975239] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  183.985785] PM: noirq resume of devices complete after 10.795 msecs
[  183.985884] [drm:hsw_disable_pc8] Disabling package C8+
[  183.991668] [drm:intel_display_power_get] enabling always-on
[  183.991670] [drm:intel_display_power_get] enabling display
[  183.991731] PM: early resume of devices complete after 5.918 msecs
[  183.992224] rtc_cmos 00:02: System wakeup disabled by ACPI
[  183.992233] sd 0:0:0:0: [sda] Starting disk
[  183.994249] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
[  183.994351] [drm:intel_opregion_setup] Public ACPI methods supported
[  183.994352] [drm:intel_opregion_setup] SWSCI supported
[  184.029500] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
[  184.029502] [drm:intel_opregion_setup] ASLE supported
[  184.035541] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  184.035547] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  184.035550] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  184.035554] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  184.035720] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
[  184.035723] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[  184.035725] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
[  184.035728] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[  184.035730] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[  184.035733] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
[  184.035736] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[  184.035738] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
[  184.035740] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[  184.035744] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A
[  184.035745] [drm:intel_dump_pipe_config] cpu_transcoder: A
[  184.035747] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  184.035749] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.035751] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.035753] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  184.035755] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  184.035756] [drm:intel_dump_pipe_config] requested mode:
[  184.035759] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  184.035760] [drm:intel_dump_pipe_config] adjusted mode:
[  184.035763] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  184.035766] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  184.035767] [drm:intel_dump_pipe_config] port clock: 0
[  184.035768] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  184.035770] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  184.035771] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  184.035772] [drm:intel_dump_pipe_config] ips: 0
[  184.035774] [drm:intel_dump_pipe_config] double wide: 0
[  184.035776] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B
[  184.035777] [drm:intel_dump_pipe_config] cpu_transcoder: B
[  184.035778] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  184.035780] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.035782] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.035784] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  184.035785] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  184.035786] [drm:intel_dump_pipe_config] requested mode:
[  184.035789] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  184.035790] [drm:intel_dump_pipe_config] adjusted mode:
[  184.035792] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  184.035794] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  184.035795] [drm:intel_dump_pipe_config] port clock: 0
[  184.035797] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  184.035798] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  184.035800] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  184.035801] [drm:intel_dump_pipe_config] ips: 0
[  184.035802] [drm:intel_dump_pipe_config] double wide: 0
[  184.035804] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C
[  184.035805] [drm:intel_dump_pipe_config] cpu_transcoder: C
[  184.035806] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  184.035808] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.035810] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.035811] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  184.035813] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  184.035813] [drm:intel_dump_pipe_config] requested mode:
[  184.035816] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  184.035817] [drm:intel_dump_pipe_config] adjusted mode:
[  184.035819] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  184.035821] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  184.035822] [drm:intel_dump_pipe_config] port clock: 0
[  184.035823] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  184.035825] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  184.035826] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  184.035827] [drm:intel_dump_pipe_config] ips: 0
[  184.035828] [drm:intel_dump_pipe_config] double wide: 0
[  184.035836] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  184.035838] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  184.035843] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  184.035850] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  184.035852] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  184.035854] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  184.035856] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  184.035857] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  184.035858] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  184.035860] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.035863] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  184.035864] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  184.035866] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  184.035867] [drm:intel_dump_pipe_config] requested mode:
[  184.035870] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  184.035871] [drm:intel_dump_pipe_config] adjusted mode:
[  184.035873] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  184.035876] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  184.035877] [drm:intel_dump_pipe_config] port clock: 540000
[  184.035878] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  184.035880] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  184.035881] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  184.035882] [drm:intel_dump_pipe_config] ips: 1
[  184.035883] [drm:intel_dump_pipe_config] double wide: 0
[  184.035923] [drm:edp_panel_on] Turn eDP port A panel power on
[  184.035925] [drm:wait_panel_power_cycle] Wait for panel power cycle
[  184.035929] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[  184.035931] [drm:wait_panel_status] Wait complete
[  184.035934] [drm:wait_panel_on] Wait for panel power on
[  184.035938] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[  184.244634] [drm:wait_panel_status] Wait complete
[  184.244643] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  184.244651] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  184.245733] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[  184.246360] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[  184.246976] [drm:intel_dp_start_link_train] clock recovery OK
[  184.247902] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[  184.248818] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[  184.249108] [drm:intel_edp_backlight_on] 
[  184.249111] [drm:intel_panel_enable_backlight] pipe A
[  184.249118] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  184.249125] [drm:intel_psr_match_conditions] PSR disable by flag
[  184.249126] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[  184.250689] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  184.283761] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  184.283765] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  184.283768] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  184.283770] [drm:check_crtc_state] [CRTC:20]
[  184.283781] [drm:check_crtc_state] [CRTC:24]
[  184.283783] [drm:check_crtc_state] [CRTC:28]
[  184.283786] [drm:check_shared_dpll_state] WRPLL 1
[  184.283788] [drm:check_shared_dpll_state] WRPLL 2
[  184.283792] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  184.283801] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  184.283804] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  184.283805] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  184.283807] [drm:check_crtc_state] [CRTC:20]
[  184.283815] [drm:check_crtc_state] [CRTC:24]
[  184.283817] [drm:check_crtc_state] [CRTC:28]
[  184.283819] [drm:check_shared_dpll_state] WRPLL 1
[  184.283820] [drm:check_shared_dpll_state] WRPLL 2
[  184.283822] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  184.283827] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  184.283829] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  184.283832] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  184.283834] [drm:check_crtc_state] [CRTC:20]
[  184.283841] [drm:check_crtc_state] [CRTC:24]
[  184.283843] [drm:check_crtc_state] [CRTC:28]
[  184.283844] [drm:check_shared_dpll_state] WRPLL 1
[  184.283845] [drm:check_shared_dpll_state] WRPLL 2
[  184.283848] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  184.283850] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  184.283852] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  184.283855] [drm:check_crtc_state] [CRTC:20]
[  184.283862] [drm:check_crtc_state] [CRTC:24]
[  184.283864] [drm:check_crtc_state] [CRTC:28]
[  184.283866] [drm:check_shared_dpll_state] WRPLL 1
[  184.283867] [drm:check_shared_dpll_state] WRPLL 2
[  184.288245] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[  184.288248] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  184.288250] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  184.288253] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  184.288255] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  184.288260] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  184.288267] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  184.288268] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  184.288271] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  184.288273] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  184.288274] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  184.288275] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  184.288277] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  184.288279] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  184.288281] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  184.288283] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  184.288283] [drm:intel_dump_pipe_config] requested mode:
[  184.288287] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  184.288288] [drm:intel_dump_pipe_config] adjusted mode:
[  184.288291] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  184.288294] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  184.288295] [drm:intel_dump_pipe_config] port clock: 540000
[  184.288296] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  184.288298] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  184.288299] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  184.288300] [drm:intel_dump_pipe_config] ips: 1
[  184.288301] [drm:intel_dump_pipe_config] double wide: 0
[  184.296692] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  184.298719] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  184.299000] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  184.299331] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  184.299500] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  184.299540] ata1.00: configured for UDMA/133
[  184.425198] usb 1-8: reset full-speed USB device number 8 using xhci_hcd
[  184.749410] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
[  185.066575] usb 1-7: reset high-speed USB device number 6 using xhci_hcd
[  185.384784] usb 1-1: reset high-speed USB device number 9 using xhci_hcd
[  185.824992] usb 1-1.4: reset high-speed USB device number 10 using xhci_hcd
[  185.894672] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  185.919872] asix 1-1.4:1.0 eth7: unregister 'asix' usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet
[  185.924937] PM: resume of devices complete after 1932.003 msecs
[  186.687798] asix 1-1.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:98:96
[  186.688259] PM: Finishing wakeup.
[  186.688262] Restarting tasks ... done.
[  186.693706] asix 1-1.4:1.0 eth7: renamed from eth0
[  186.702248] systemd-udevd[6107]: renamed network interface eth0 to eth7
[  187.261583] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  187.261595] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  187.399651] asix 1-1.4:1.0 eth7: link down
[  188.475602] asix 1-1.4:1.0 eth7: link up, 100Mbps, full-duplex, lpa 0xC5E1
[  189.895178] [drm] stuck on render ring
[  189.896352] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [3970], reason: Ring hung, action: reset
[  189.896408] [drm:i915_reset_and_wakeup] resetting chip
[  189.897652] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  189.897830] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  189.897837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  189.897880] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  189.897890] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  189.897902] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[  189.898108] drm/i915: Resetting chip after gpu hang
[  189.898139] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  189.898154] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  189.898160] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  189.898177] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  189.898231] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  189.898661] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  189.898994] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  189.899469] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  189.899638] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  189.899643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  189.899676] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  189.900160] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  189.900487] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  189.900943] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  189.901157] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  189.901162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  189.901204] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  189.901554] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  189.901890] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  191.898330] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  192.407095] PM: Syncing filesystems ... done.
[  192.437367] PM: Preparing system for mem sleep
[  192.437547] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  192.439191] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  192.440536] PM: Entering mem sleep
[  192.440562] Suspending console(s) (use no_console_suspend to debug)
[  192.441013] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  192.472414] sd 0:0:0:0: [sda] Stopping disk
[  192.473128] [drm:intel_display_power_put] disabling display
[  192.473133] [drm:hsw_set_power_well] Requesting to disable the power well
[  192.473140] [drm:intel_display_power_get] enabling display
[  192.473142] [drm:hsw_set_power_well] Enabling power well
[  192.488732] [drm:intel_edp_backlight_off] 
[  192.689903] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[  192.706098] [drm:edp_panel_off] Turn eDP port A panel power off
[  192.706102] [drm:wait_panel_off] Wait for panel power off time
[  192.706108] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[  192.760944] [drm:wait_panel_status] Wait complete
[  192.764966] [drm:intel_display_power_put] disabling display
[  192.764970] [drm:hsw_set_power_well] Requesting to disable the power well
[  192.764971] [drm:intel_display_power_put] disabling always-on
[  192.765043] PM: suspend of devices complete after 324.086 msecs
[  192.765440] [drm:hsw_enable_pc8] Enabling package C8+
[  192.782057] PM: late suspend of devices complete after 16.997 msecs
[  192.782748] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  192.792890] PM: noirq suspend of devices complete after 10.823 msecs
[  192.793551] ACPI: Preparing to enter system sleep state S3
[  192.821149] PM: Saving platform NVS memory
[  192.821188] Disabling non-boot CPUs ...
[  192.822405] smpboot: CPU 1 is now offline
[  192.824194] smpboot: CPU 2 is now offline
[  192.824946] Broke affinity for irq 42
[  192.825976] smpboot: CPU 3 is now offline
[  192.828796] ACPI: Low-level resume complete
[  192.828871] PM: Restoring platform NVS memory
[  192.829286] CPU0: Thermal LVT vector (0xfa) already installed
[  192.829308] Enabling non-boot CPUs ...
[  192.829352] x86: Booting SMP configuration:
[  192.829354] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  192.842266] CPU1: Thermal LVT vector (0xfa) already installed
[  192.845044] CPU1 is up
[  192.845075] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  192.857976] CPU2: Thermal LVT vector (0xfa) already installed
[  192.860748] CPU2 is up
[  192.860780] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  192.873698] CPU3: Thermal LVT vector (0xfa) already installed
[  192.876460] CPU3 is up
[  192.883257] ACPI: Waking up from system sleep state S3
[  195.399140] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  195.409690] PM: noirq resume of devices complete after 10.764 msecs
[  195.409789] [drm:hsw_disable_pc8] Disabling package C8+
[  195.415604] [drm:intel_display_power_get] enabling always-on
[  195.415606] [drm:intel_display_power_get] enabling display
[  195.415666] PM: early resume of devices complete after 5.949 msecs
[  195.416099] rtc_cmos 00:02: System wakeup disabled by ACPI
[  195.416171] sd 0:0:0:0: [sda] Starting disk
[  195.418187] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
[  195.418291] [drm:intel_opregion_setup] Public ACPI methods supported
[  195.418292] [drm:intel_opregion_setup] SWSCI supported
[  195.423402] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
[  195.423404] [drm:intel_opregion_setup] ASLE supported
[  195.429445] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  195.429452] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  195.429456] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  195.429461] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  195.429647] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
[  195.429650] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[  195.429653] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
[  195.429656] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[  195.429659] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[  195.429663] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
[  195.429666] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[  195.429670] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
[  195.429673] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[  195.429678] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A
[  195.429679] [drm:intel_dump_pipe_config] cpu_transcoder: A
[  195.429681] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  195.429684] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.429687] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.429690] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  195.429692] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  195.429694] [drm:intel_dump_pipe_config] requested mode:
[  195.429699] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  195.429700] [drm:intel_dump_pipe_config] adjusted mode:
[  195.429704] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  195.429708] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  195.429709] [drm:intel_dump_pipe_config] port clock: 0
[  195.429711] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  195.429714] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  195.429716] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  195.429718] [drm:intel_dump_pipe_config] ips: 0
[  195.429720] [drm:intel_dump_pipe_config] double wide: 0
[  195.429723] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B
[  195.429724] [drm:intel_dump_pipe_config] cpu_transcoder: B
[  195.429726] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  195.429729] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.429732] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.429735] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  195.429736] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  195.429737] [drm:intel_dump_pipe_config] requested mode:
[  195.429742] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  195.429743] [drm:intel_dump_pipe_config] adjusted mode:
[  195.429747] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  195.429751] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  195.429752] [drm:intel_dump_pipe_config] port clock: 0
[  195.429754] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  195.429756] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  195.429758] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  195.429760] [drm:intel_dump_pipe_config] ips: 0
[  195.429762] [drm:intel_dump_pipe_config] double wide: 0
[  195.429764] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C
[  195.429766] [drm:intel_dump_pipe_config] cpu_transcoder: C
[  195.429768] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  195.429771] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.429773] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.429776] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  195.429778] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  195.429779] [drm:intel_dump_pipe_config] requested mode:
[  195.429783] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  195.429784] [drm:intel_dump_pipe_config] adjusted mode:
[  195.429788] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  195.429791] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  195.429793] [drm:intel_dump_pipe_config] port clock: 0
[  195.429795] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  195.429797] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  195.429799] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  195.429800] [drm:intel_dump_pipe_config] ips: 0
[  195.429802] [drm:intel_dump_pipe_config] double wide: 0
[  195.429811] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  195.429814] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  195.429819] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  195.429829] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  195.429831] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  195.429835] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  195.429837] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  195.429838] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  195.429840] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  195.429842] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.429846] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  195.429849] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  195.429850] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  195.429852] [drm:intel_dump_pipe_config] requested mode:
[  195.429857] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  195.429858] [drm:intel_dump_pipe_config] adjusted mode:
[  195.429863] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  195.429867] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  195.429869] [drm:intel_dump_pipe_config] port clock: 540000
[  195.429871] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  195.429873] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  195.429875] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  195.429877] [drm:intel_dump_pipe_config] ips: 1
[  195.429878] [drm:intel_dump_pipe_config] double wide: 0
[  195.429923] [drm:edp_panel_on] Turn eDP port A panel power on
[  195.429925] [drm:wait_panel_power_cycle] Wait for panel power cycle
[  195.429931] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[  195.429933] [drm:wait_panel_status] Wait complete
[  195.429937] [drm:wait_panel_on] Wait for panel power on
[  195.429942] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[  195.638550] [drm:wait_panel_status] Wait complete
[  195.638557] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  195.638565] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  195.639642] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[  195.640268] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[  195.640884] [drm:intel_dp_start_link_train] clock recovery OK
[  195.641810] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[  195.642729] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[  195.643019] [drm:intel_edp_backlight_on] 
[  195.643021] [drm:intel_panel_enable_backlight] pipe A
[  195.643028] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  195.643035] [drm:intel_psr_match_conditions] PSR disable by flag
[  195.643036] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[  195.644556] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  195.677627] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  195.677631] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  195.677633] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  195.677636] [drm:check_crtc_state] [CRTC:20]
[  195.677646] [drm:check_crtc_state] [CRTC:24]
[  195.677648] [drm:check_crtc_state] [CRTC:28]
[  195.677650] [drm:check_shared_dpll_state] WRPLL 1
[  195.677652] [drm:check_shared_dpll_state] WRPLL 2
[  195.677655] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  195.677663] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  195.677665] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  195.677667] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  195.677668] [drm:check_crtc_state] [CRTC:20]
[  195.677676] [drm:check_crtc_state] [CRTC:24]
[  195.677678] [drm:check_crtc_state] [CRTC:28]
[  195.677679] [drm:check_shared_dpll_state] WRPLL 1
[  195.677681] [drm:check_shared_dpll_state] WRPLL 2
[  195.677683] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  195.677687] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  195.677689] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  195.677691] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  195.677693] [drm:check_crtc_state] [CRTC:20]
[  195.677700] [drm:check_crtc_state] [CRTC:24]
[  195.677702] [drm:check_crtc_state] [CRTC:28]
[  195.677703] [drm:check_shared_dpll_state] WRPLL 1
[  195.677705] [drm:check_shared_dpll_state] WRPLL 2
[  195.677708] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  195.677710] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  195.677712] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  195.677713] [drm:check_crtc_state] [CRTC:20]
[  195.677720] [drm:check_crtc_state] [CRTC:24]
[  195.677722] [drm:check_crtc_state] [CRTC:28]
[  195.677724] [drm:check_shared_dpll_state] WRPLL 1
[  195.677725] [drm:check_shared_dpll_state] WRPLL 2
[  195.682057] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[  195.682060] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  195.682062] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  195.682065] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  195.682067] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  195.682071] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  195.682078] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  195.682079] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  195.682082] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  195.682083] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  195.682084] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  195.682086] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  195.682088] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  195.682090] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  195.682092] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  195.682094] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  195.682094] [drm:intel_dump_pipe_config] requested mode:
[  195.682098] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  195.682099] [drm:intel_dump_pipe_config] adjusted mode:
[  195.682102] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  195.682105] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  195.682106] [drm:intel_dump_pipe_config] port clock: 540000
[  195.682107] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  195.682109] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  195.682110] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  195.682111] [drm:intel_dump_pipe_config] ips: 1
[  195.682112] [drm:intel_dump_pipe_config] double wide: 0
[  195.720704] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  195.722830] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  195.723018] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  195.723308] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  195.723470] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  195.723509] ata1.00: configured for UDMA/133
[  195.849135] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
[  196.166372] usb 1-1: reset high-speed USB device number 9 using xhci_hcd
[  196.483514] usb 1-7: reset high-speed USB device number 6 using xhci_hcd
[  196.801761] usb 1-8: reset full-speed USB device number 8 using xhci_hcd
[  196.896360] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  197.042803] usb 1-1.4: reset high-speed USB device number 10 using xhci_hcd
[  197.137667] asix 1-1.4:1.0 eth7: unregister 'asix' usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet
[  197.142664] PM: resume of devices complete after 1725.933 msecs
[  197.905535] asix 1-1.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:98:96
[  197.906015] PM: Finishing wakeup.
[  197.906018] Restarting tasks ... done.
[  197.910311] asix 1-1.4:1.0 eth7: renamed from eth0
[  197.920072] systemd-udevd[6107]: renamed network interface eth0 to eth7
[  198.617515] asix 1-1.4:1.0 eth7: link down
[  198.647385] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  198.647397] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  199.643258] asix 1-1.4:1.0 eth7: link up, 100Mbps, full-duplex, lpa 0xC5E1
[  201.897421] [drm] stuck on render ring
[  201.898586] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [3970], reason: Ring hung, action: reset
[  201.898648] [drm:i915_reset_and_wakeup] resetting chip
[  201.899679] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  201.899875] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  201.899882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  201.899928] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  201.899937] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  201.899945] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[  201.900289] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  201.900382] drm/i915: Resetting chip after gpu hang
[  201.900412] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  201.900420] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  201.900428] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  201.900434] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  201.900503] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  201.900696] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  201.901200] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  201.901638] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  201.901646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  201.901694] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  201.902035] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  201.902502] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  201.902955] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  201.903122] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  201.903128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  201.903176] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  201.903513] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  201.904174] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  203.900615] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  203.936274] PM: Syncing filesystems ... done.
[  203.960875] PM: Preparing system for mem sleep
[  203.961048] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  203.962570] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  203.963799] PM: Entering mem sleep
[  203.963824] Suspending console(s) (use no_console_suspend to debug)
[  203.964346] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  203.996181] sd 0:0:0:0: [sda] Stopping disk
[  204.016690] [drm:intel_edp_backlight_off] 
[  204.217805] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[  204.231974] [drm:edp_panel_off] Turn eDP port A panel power off
[  204.231979] [drm:wait_panel_off] Wait for panel power off time
[  204.231983] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[  204.286942] [drm:wait_panel_status] Wait complete
[  204.290963] [drm:intel_display_power_put] disabling display
[  204.290967] [drm:hsw_set_power_well] Requesting to disable the power well
[  204.290969] [drm:intel_display_power_put] disabling always-on
[  204.291041] PM: suspend of devices complete after 326.858 msecs
[  204.291445] [drm:hsw_enable_pc8] Enabling package C8+
[  204.307997] PM: late suspend of devices complete after 16.940 msecs
[  204.308719] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  204.318891] PM: noirq suspend of devices complete after 10.882 msecs
[  204.319552] ACPI: Preparing to enter system sleep state S3
[  204.347143] PM: Saving platform NVS memory
[  204.347182] Disabling non-boot CPUs ...
[  204.348400] smpboot: CPU 1 is now offline
[  204.350182] smpboot: CPU 2 is now offline
[  204.351960] smpboot: CPU 3 is now offline
[  204.354953] ACPI: Low-level resume complete
[  204.355030] PM: Restoring platform NVS memory
[  204.355455] CPU0: Thermal LVT vector (0xfa) already installed
[  204.355479] Enabling non-boot CPUs ...
[  204.355527] x86: Booting SMP configuration:
[  204.355528] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  204.368440] CPU1: Thermal LVT vector (0xfa) already installed
[  204.371227] CPU1 is up
[  204.371259] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  204.384160] CPU2: Thermal LVT vector (0xfa) already installed
[  204.386929] CPU2 is up
[  204.386961] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  204.399879] CPU3: Thermal LVT vector (0xfa) already installed
[  204.402653] CPU3 is up
[  204.409461] ACPI: Waking up from system sleep state S3
[  206.924302] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  206.934880] PM: noirq resume of devices complete after 10.805 msecs
[  206.935008] [drm:hsw_disable_pc8] Disabling package C8+
[  206.940765] [drm:intel_display_power_get] enabling always-on
[  206.940766] [drm:intel_display_power_get] enabling display
[  206.940880] PM: early resume of devices complete after 5.972 msecs
[  206.941391] rtc_cmos 00:02: System wakeup disabled by ACPI
[  206.941660] sd 0:0:0:0: [sda] Starting disk
[  206.943360] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
[  206.943466] [drm:intel_opregion_setup] Public ACPI methods supported
[  206.943467] [drm:intel_opregion_setup] SWSCI supported
[  206.978693] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
[  206.978695] [drm:intel_opregion_setup] ASLE supported
[  206.982706] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  206.982713] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  206.982716] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  206.982720] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  206.982902] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
[  206.982905] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[  206.982907] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
[  206.982910] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[  206.982912] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[  206.982915] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
[  206.982917] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[  206.982920] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
[  206.982922] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[  206.982926] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A
[  206.982927] [drm:intel_dump_pipe_config] cpu_transcoder: A
[  206.982929] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  206.982931] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  206.982933] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  206.982935] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  206.982936] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  206.982937] [drm:intel_dump_pipe_config] requested mode:
[  206.982941] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  206.982942] [drm:intel_dump_pipe_config] adjusted mode:
[  206.982945] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  206.982947] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  206.982948] [drm:intel_dump_pipe_config] port clock: 0
[  206.982949] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  206.982951] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  206.982953] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  206.982954] [drm:intel_dump_pipe_config] ips: 0
[  206.982955] [drm:intel_dump_pipe_config] double wide: 0
[  206.982957] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B
[  206.982958] [drm:intel_dump_pipe_config] cpu_transcoder: B
[  206.982959] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  206.982962] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  206.982963] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  206.982965] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  206.982966] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  206.982967] [drm:intel_dump_pipe_config] requested mode:
[  206.982970] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  206.982971] [drm:intel_dump_pipe_config] adjusted mode:
[  206.982973] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  206.982976] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  206.982976] [drm:intel_dump_pipe_config] port clock: 0
[  206.982978] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  206.982979] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  206.982981] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  206.982982] [drm:intel_dump_pipe_config] ips: 0
[  206.982983] [drm:intel_dump_pipe_config] double wide: 0
[  206.982985] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C
[  206.982986] [drm:intel_dump_pipe_config] cpu_transcoder: C
[  206.982987] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  206.982989] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  206.982991] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  206.982993] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  206.982994] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  206.982995] [drm:intel_dump_pipe_config] requested mode:
[  206.982997] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  206.982998] [drm:intel_dump_pipe_config] adjusted mode:
[  206.983000] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  206.983002] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  206.983003] [drm:intel_dump_pipe_config] port clock: 0
[  206.983004] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  206.983006] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  206.983007] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  206.983008] [drm:intel_dump_pipe_config] ips: 0
[  206.983009] [drm:intel_dump_pipe_config] double wide: 0
[  206.983017] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  206.983020] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  206.983024] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  206.983032] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  206.983033] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  206.983036] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  206.983038] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  206.983038] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  206.983040] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  206.983042] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  206.983044] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  206.983046] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  206.983047] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  206.983048] [drm:intel_dump_pipe_config] requested mode:
[  206.983051] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  206.983052] [drm:intel_dump_pipe_config] adjusted mode:
[  206.983055] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  206.983058] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  206.983059] [drm:intel_dump_pipe_config] port clock: 540000
[  206.983060] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  206.983062] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  206.983063] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  206.983064] [drm:intel_dump_pipe_config] ips: 1
[  206.983065] [drm:intel_dump_pipe_config] double wide: 0
[  206.983105] [drm:edp_panel_on] Turn eDP port A panel power on
[  206.983107] [drm:wait_panel_power_cycle] Wait for panel power cycle
[  206.983111] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[  206.983113] [drm:wait_panel_status] Wait complete
[  206.983117] [drm:wait_panel_on] Wait for panel power on
[  206.983121] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[  207.191783] [drm:wait_panel_status] Wait complete
[  207.191793] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  207.191802] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  207.192890] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[  207.193516] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[  207.194132] [drm:intel_dp_start_link_train] clock recovery OK
[  207.195057] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[  207.195974] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[  207.196264] [drm:intel_edp_backlight_on] 
[  207.196267] [drm:intel_panel_enable_backlight] pipe A
[  207.196274] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  207.196280] [drm:intel_psr_match_conditions] PSR disable by flag
[  207.196282] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[  207.197743] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  207.229618] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  207.229622] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  207.229624] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  207.229626] [drm:check_crtc_state] [CRTC:20]
[  207.229637] [drm:check_crtc_state] [CRTC:24]
[  207.229639] [drm:check_crtc_state] [CRTC:28]
[  207.229641] [drm:check_shared_dpll_state] WRPLL 1
[  207.229643] [drm:check_shared_dpll_state] WRPLL 2
[  207.229647] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  207.229656] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  207.229658] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  207.229660] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  207.229661] [drm:check_crtc_state] [CRTC:20]
[  207.229671] [drm:check_crtc_state] [CRTC:24]
[  207.229673] [drm:check_crtc_state] [CRTC:28]
[  207.229674] [drm:check_shared_dpll_state] WRPLL 1
[  207.229675] [drm:check_shared_dpll_state] WRPLL 2
[  207.229678] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  207.229682] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  207.229684] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  207.229688] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  207.229689] [drm:check_crtc_state] [CRTC:20]
[  207.229697] [drm:check_crtc_state] [CRTC:24]
[  207.229699] [drm:check_crtc_state] [CRTC:28]
[  207.229700] [drm:check_shared_dpll_state] WRPLL 1
[  207.229701] [drm:check_shared_dpll_state] WRPLL 2
[  207.229704] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  207.229706] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  207.229710] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  207.229711] [drm:check_crtc_state] [CRTC:20]
[  207.229719] [drm:check_crtc_state] [CRTC:24]
[  207.229721] [drm:check_crtc_state] [CRTC:28]
[  207.229722] [drm:check_shared_dpll_state] WRPLL 1
[  207.229723] [drm:check_shared_dpll_state] WRPLL 2
[  207.233865] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[  207.233869] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  207.233871] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  207.233873] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  207.233876] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  207.233880] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  207.233888] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  207.233889] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  207.233892] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  207.233893] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  207.233894] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  207.233896] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  207.233898] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  207.233901] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  207.233903] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  207.233904] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  207.233905] [drm:intel_dump_pipe_config] requested mode:
[  207.233909] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  207.233909] [drm:intel_dump_pipe_config] adjusted mode:
[  207.233912] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  207.233915] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  207.233916] [drm:intel_dump_pipe_config] port clock: 540000
[  207.233917] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  207.233919] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  207.233921] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  207.233921] [drm:intel_dump_pipe_config] ips: 1
[  207.233922] [drm:intel_dump_pipe_config] double wide: 0
[  207.245793] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  207.247818] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  207.248096] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  207.248450] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  207.248635] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  207.248676] ata1.00: configured for UDMA/133
[  207.375299] usb 1-8: reset full-speed USB device number 8 using xhci_hcd
[  207.696493] usb 1-1: reset high-speed USB device number 9 using xhci_hcd
[  208.013729] usb 1-7: reset high-speed USB device number 6 using xhci_hcd
[  208.331889] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
[  208.569129] usb 1-1.4: reset high-speed USB device number 10 using xhci_hcd
[  208.663773] asix 1-1.4:1.0 eth7: unregister 'asix' usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet
[  208.668854] PM: resume of devices complete after 1726.909 msecs
[  208.914830] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  209.431731] asix 1-1.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:98:96
[  209.432187] PM: Finishing wakeup.
[  209.432190] Restarting tasks ... done.
[  209.435455] asix 1-1.4:1.0 eth7: renamed from eth0
[  209.442210] systemd-udevd[6107]: renamed network interface eth0 to eth7
[  210.147085] asix 1-1.4:1.0 eth7: link down
[  210.201675] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  210.201689] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  211.296662] asix 1-1.4:1.0 eth7: link up, 100Mbps, full-duplex, lpa 0xC5E1
[  212.915303] [drm] stuck on render ring
[  212.916500] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [3970], reason: Ring hung, action: reset
[  212.916558] [drm:i915_reset_and_wakeup] resetting chip
[  212.917692] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  212.917888] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  212.917895] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  212.917944] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  212.917952] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  212.917962] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[  212.918241] drm/i915: Resetting chip after gpu hang
[  212.918275] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  212.918286] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  212.918296] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  212.918317] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  212.918377] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  212.918441] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  212.918769] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  212.919263] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  212.919437] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  212.919442] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  212.919478] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  212.920070] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  212.920507] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  212.921008] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  212.921182] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  212.921187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  212.921235] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  212.921574] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  212.921896] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  214.916616] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  215.925089] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  215.925101] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  218.197501] PM: Syncing filesystems ... done.
[  218.224786] PM: Preparing system for mem sleep
[  218.224962] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  218.226431] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  218.227608] PM: Entering mem sleep
[  218.227628] Suspending console(s) (use no_console_suspend to debug)
[  218.228151] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  218.260065] sd 0:0:0:0: [sda] Stopping disk
[  218.260847] [drm:intel_display_power_put] disabling display
[  218.260852] [drm:hsw_set_power_well] Requesting to disable the power well
[  218.260857] [drm:intel_display_power_get] enabling display
[  218.260860] [drm:hsw_set_power_well] Enabling power well
[  218.304545] [drm:intel_edp_backlight_off] 
[  218.505659] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[  218.521679] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  218.521687] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  218.521845] [drm:edp_panel_off] Turn eDP port A panel power off
[  218.521851] [drm:wait_panel_off] Wait for panel power off time
[  218.521855] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[  218.576802] [drm:wait_panel_status] Wait complete
[  218.580821] [drm:intel_display_power_put] disabling display
[  218.580825] [drm:hsw_set_power_well] Requesting to disable the power well
[  218.580826] [drm:intel_display_power_put] disabling always-on
[  218.580899] PM: suspend of devices complete after 352.903 msecs
[  218.581308] [drm:hsw_enable_pc8] Enabling package C8+
[  218.597858] PM: late suspend of devices complete after 16.942 msecs
[  218.598508] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  218.608749] PM: noirq suspend of devices complete after 10.879 msecs
[  218.609411] ACPI: Preparing to enter system sleep state S3
[  218.637002] PM: Saving platform NVS memory
[  218.637042] Disabling non-boot CPUs ...
[  218.638257] smpboot: CPU 1 is now offline
[  218.640727] smpboot: CPU 2 is now offline
[  218.642208] smpboot: CPU 3 is now offline
[  218.645105] ACPI: Low-level resume complete
[  218.645182] PM: Restoring platform NVS memory
[  218.645607] CPU0: Thermal LVT vector (0xfa) already installed
[  218.645631] Enabling non-boot CPUs ...
[  218.645678] x86: Booting SMP configuration:
[  218.645679] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  218.658591] CPU1: Thermal LVT vector (0xfa) already installed
[  218.661374] CPU1 is up
[  218.661405] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  218.674296] CPU2: Thermal LVT vector (0xfa) already installed
[  218.676991] CPU2 is up
[  218.677023] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  218.689936] CPU3: Thermal LVT vector (0xfa) already installed
[  218.692709] CPU3 is up
[  218.699436] ACPI: Waking up from system sleep state S3
[  221.213948] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  221.224718] PM: noirq resume of devices complete after 10.943 msecs
[  221.224816] [drm:hsw_disable_pc8] Disabling package C8+
[  221.230631] [drm:intel_display_power_get] enabling always-on
[  221.230632] [drm:intel_display_power_get] enabling display
[  221.230693] PM: early resume of devices complete after 5.948 msecs
[  221.231224] sd 0:0:0:0: [sda] Starting disk
[  221.231249] rtc_cmos 00:02: System wakeup disabled by ACPI
[  221.233244] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
[  221.233354] [drm:intel_opregion_setup] Public ACPI methods supported
[  221.233356] [drm:intel_opregion_setup] SWSCI supported
[  221.238427] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
[  221.238428] [drm:intel_opregion_setup] ASLE supported
[  221.244472] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  221.244478] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  221.244482] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  221.244487] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  221.244672] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
[  221.244674] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[  221.244677] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
[  221.244681] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[  221.244683] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[  221.244687] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
[  221.244691] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[  221.244694] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
[  221.244697] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[  221.244702] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A
[  221.244704] [drm:intel_dump_pipe_config] cpu_transcoder: A
[  221.244705] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  221.244709] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.244712] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.244715] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  221.244717] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  221.244719] [drm:intel_dump_pipe_config] requested mode:
[  221.244723] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  221.244725] [drm:intel_dump_pipe_config] adjusted mode:
[  221.244728] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  221.244732] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  221.244734] [drm:intel_dump_pipe_config] port clock: 0
[  221.244736] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  221.244739] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  221.244741] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  221.244742] [drm:intel_dump_pipe_config] ips: 0
[  221.244744] [drm:intel_dump_pipe_config] double wide: 0
[  221.244747] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B
[  221.244749] [drm:intel_dump_pipe_config] cpu_transcoder: B
[  221.244751] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  221.244754] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.244757] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.244759] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  221.244761] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  221.244763] [drm:intel_dump_pipe_config] requested mode:
[  221.244767] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  221.244768] [drm:intel_dump_pipe_config] adjusted mode:
[  221.244772] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  221.244775] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  221.244777] [drm:intel_dump_pipe_config] port clock: 0
[  221.244778] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  221.244780] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  221.244783] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  221.244784] [drm:intel_dump_pipe_config] ips: 0
[  221.244786] [drm:intel_dump_pipe_config] double wide: 0
[  221.244788] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C
[  221.244790] [drm:intel_dump_pipe_config] cpu_transcoder: C
[  221.244792] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[  221.244795] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.244797] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.244800] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  221.244802] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  221.244803] [drm:intel_dump_pipe_config] requested mode:
[  221.244807] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  221.244808] [drm:intel_dump_pipe_config] adjusted mode:
[  221.244812] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[  221.244816] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[  221.244817] [drm:intel_dump_pipe_config] port clock: 0
[  221.244819] [drm:intel_dump_pipe_config] pipe src size: 0x0
[  221.244821] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  221.244823] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  221.244825] [drm:intel_dump_pipe_config] ips: 0
[  221.244826] [drm:intel_dump_pipe_config] double wide: 0
[  221.244837] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  221.244840] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  221.244845] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  221.244855] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  221.244857] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  221.244861] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  221.244863] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  221.244864] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  221.244866] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  221.244869] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.244873] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  221.244876] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  221.244877] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  221.244879] [drm:intel_dump_pipe_config] requested mode:
[  221.244884] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  221.244885] [drm:intel_dump_pipe_config] adjusted mode:
[  221.244889] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  221.244894] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  221.244895] [drm:intel_dump_pipe_config] port clock: 540000
[  221.244897] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  221.244899] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  221.244902] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  221.244903] [drm:intel_dump_pipe_config] ips: 1
[  221.244905] [drm:intel_dump_pipe_config] double wide: 0
[  221.244951] [drm:edp_panel_on] Turn eDP port A panel power on
[  221.244954] [drm:wait_panel_power_cycle] Wait for panel power cycle
[  221.244959] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[  221.244962] [drm:wait_panel_status] Wait complete
[  221.244966] [drm:wait_panel_on] Wait for panel power on
[  221.244970] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[  221.453672] [drm:wait_panel_status] Wait complete
[  221.453683] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  221.453691] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  221.454777] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[  221.455404] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[  221.456024] [drm:intel_dp_start_link_train] clock recovery OK
[  221.456950] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[  221.457868] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[  221.458159] [drm:intel_edp_backlight_on] 
[  221.458162] [drm:intel_panel_enable_backlight] pipe A
[  221.458169] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  221.458175] [drm:intel_psr_match_conditions] PSR disable by flag
[  221.458177] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[  221.459584] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  221.491462] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  221.491465] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  221.491468] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  221.491470] [drm:check_crtc_state] [CRTC:20]
[  221.491481] [drm:check_crtc_state] [CRTC:24]
[  221.491483] [drm:check_crtc_state] [CRTC:28]
[  221.491485] [drm:check_shared_dpll_state] WRPLL 1
[  221.491487] [drm:check_shared_dpll_state] WRPLL 2
[  221.491490] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  221.491497] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  221.491500] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  221.491501] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  221.491503] [drm:check_crtc_state] [CRTC:20]
[  221.491511] [drm:check_crtc_state] [CRTC:24]
[  221.491512] [drm:check_crtc_state] [CRTC:28]
[  221.491514] [drm:check_shared_dpll_state] WRPLL 1
[  221.491515] [drm:check_shared_dpll_state] WRPLL 2
[  221.491517] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  221.491522] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  221.491524] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  221.491526] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  221.491527] [drm:check_crtc_state] [CRTC:20]
[  221.491534] [drm:check_crtc_state] [CRTC:24]
[  221.491536] [drm:check_crtc_state] [CRTC:28]
[  221.491538] [drm:check_shared_dpll_state] WRPLL 1
[  221.491539] [drm:check_shared_dpll_state] WRPLL 2
[  221.491542] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  221.491544] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  221.491546] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  221.491547] [drm:check_crtc_state] [CRTC:20]
[  221.491554] [drm:check_crtc_state] [CRTC:24]
[  221.491556] [drm:check_crtc_state] [CRTC:28]
[  221.491558] [drm:check_shared_dpll_state] WRPLL 1
[  221.491560] [drm:check_shared_dpll_state] WRPLL 2
[  221.495651] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[  221.495656] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  221.495659] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  221.495661] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  221.495664] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  221.495668] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  221.495675] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  221.495677] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  221.495679] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  221.495681] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  221.495682] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  221.495683] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  221.495685] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  221.495687] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  221.495689] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  221.495691] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  221.495692] [drm:intel_dump_pipe_config] requested mode:
[  221.495696] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  221.495696] [drm:intel_dump_pipe_config] adjusted mode:
[  221.495699] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  221.495702] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  221.495703] [drm:intel_dump_pipe_config] port clock: 540000
[  221.495704] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  221.495706] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  221.495708] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  221.495709] [drm:intel_dump_pipe_config] ips: 1
[  221.495710] [drm:intel_dump_pipe_config] double wide: 0
[  221.535727] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  221.537844] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  221.538036] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  221.538354] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[  221.538513] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  221.538553] ata1.00: configured for UDMA/133
[  221.664162] usb 1-4: reset full-speed USB device number 5 using xhci_hcd
[  221.981399] usb 1-1: reset high-speed USB device number 9 using xhci_hcd
[  222.298539] usb 1-7: reset high-speed USB device number 6 using xhci_hcd
[  222.616736] usb 1-8: reset full-speed USB device number 8 using xhci_hcd
[  222.855862] usb 1-1.4: reset high-speed USB device number 10 using xhci_hcd
[  222.924636] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  222.950659] asix 1-1.4:1.0 eth7: unregister 'asix' usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet
[  222.955698] PM: resume of devices complete after 1723.941 msecs
[  223.718714] asix 1-1.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-1.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:98:96
[  223.719203] PM: Finishing wakeup.
[  223.719207] Restarting tasks ... done.
[  223.723814] asix 1-1.4:1.0 eth7: renamed from eth0
[  223.733188] systemd-udevd[6583]: renamed network interface eth0 to eth7
[  224.442130] asix 1-1.4:1.0 eth7: link down
[  224.461602] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  224.461616] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  225.586292] asix 1-1.4:1.0 eth7: link up, 100Mbps, full-duplex, lpa 0xC5E1
[  226.926972] [drm] stuck on render ring
[  226.928130] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [3970], reason: Ring hung, action: reset
[  226.928187] [drm:i915_reset_and_wakeup] resetting chip
[  226.929375] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  226.929554] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  226.929561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  226.929605] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  226.929617] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  226.929627] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[  226.929923] drm/i915: Resetting chip after gpu hang
[  226.929953] [drm:gen8_init_common_ring] Execlists enabled for render ring
[  226.929965] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[  226.929971] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[  226.929977] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[  226.930041] [drm:ironlake_update_primary_plane] Writing base 0009C000 00000000 0 0 12800
[  226.930088] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  226.931145] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  226.931659] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  226.931829] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  226.931835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  226.931879] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  226.932223] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  226.932547] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  226.932877] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  226.933045] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  226.933049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  226.933078] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  226.933400] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  226.933720] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  228.930183] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[  229.936824] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  229.936838] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007