[ 0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2015_03_25/drm-intel-nightly/877605d94cb0260cb05a110b8a1ec3871a8477ea/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe hostname=x-pk5 modules_path=kernels//nightly_parents/2015_03_25/drm-intel-nightly/877605d94cb0260cb05a110b8a1ec3871a8477ea/modules_x86_64/lib/modules/4.0.0-rc5_drm-intel-nightly_877605_20150325+ [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3762212K/3927544K available (7804K kernel code, 887K rwdata, 4016K rodata, 23292K init, 624K bss, 165332K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:488 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3199.836 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.67 BogoMIPS (lpj=3199836) [ 0.000143] pid_max: default: 32768 minimum: 301 [ 0.000215] ACPI: Core revision 20150204 [ 0.002862] ACPI: All ACPI Tables successfully acquired [ 0.002986] Security Framework initialized [ 0.003223] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004386] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004955] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.005034] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.005305] CPU: Physical Processor ID: 0 [ 0.005373] CPU: Processor Core ID: 0 [ 0.005443] mce: CPU supports 9 MCE banks [ 0.005516] CPU0: Thermal LVT vector (0xfa) already installed [ 0.005523] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.005594] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.005768] Freeing SMP alternatives memory: 32K (ffffffff8332c000 - ffffffff83334000) [ 0.006316] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.118039] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz (fam: 06, model: 25, stepping: 02) [ 0.118230] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.118428] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.118504] ... version: 3 [ 0.118572] ... bit width: 48 [ 0.118639] ... generic registers: 4 [ 0.118706] ... value mask: 0000ffffffffffff [ 0.118777] ... max period: 000000007fffffff [ 0.118848] ... fixed-purpose events: 3 [ 0.118916] ... event mask: 000000070000000f [ 0.119199] x86: Booting SMP configuration: [ 0.119268] .... node #0, CPUs: #1 [ 0.130473] CPU1: Thermal LVT vector (0xfa) already installed [ 0.132633] #2 [ 0.143852] CPU2: Thermal LVT vector (0xfa) already installed [ 0.157148] #3 [ 0.157148] CPU3: Thermal LVT vector (0xfa) already installed [ 0.159247] x86: Booted up 1 node, 4 CPUs [ 0.159381] smpboot: Total of 4 processors activated (25598.68 BogoMIPS) [ 0.161161] devtmpfs: initialized [ 0.161473] PM: Registering ACPI NVS region [mem 0xd7be0000-0xd7be2fff] (12288 bytes) [ 0.161715] xor: measuring software checksum speed [ 0.171037] prefetch64-sse: 13896.000 MB/sec [ 0.181036] generic_sse: 12196.000 MB/sec [ 0.181105] xor: using function: prefetch64-sse (13896.000 MB/sec) [ 0.181202] RTC time: 2:08:26, date: 03/25/15 [ 0.181358] NET: Registered protocol family 16 [ 0.187043] cpuidle: using governor ladder [ 0.193042] cpuidle: using governor menu [ 0.193187] ACPI: bus type PCI registered [ 0.193309] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.193432] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.193555] PCI: Using configuration type 1 for base access [ 0.213042] raid6: sse2x1 7957 MB/s [ 0.230040] raid6: sse2x2 9484 MB/s [ 0.247038] raid6: sse2x4 10503 MB/s [ 0.247106] raid6: using algorithm sse2x4 (10503 MB/s) [ 0.247176] raid6: using ssse3x2 recovery algorithm [ 0.247287] ACPI: Added _OSI(Module Device) [ 0.247355] ACPI: Added _OSI(Processor Device) [ 0.247424] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.247493] ACPI: Added _OSI(Processor Aggregator Device) [ 0.250693] ACPI: Interpreter enabled [ 0.250766] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 0.250923] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 0.251086] ACPI: (supports S0 S3 S4 S5) [ 0.251154] ACPI: Using IOAPIC for interrupt routing [ 0.251246] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.255855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.255933] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.256054] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.256183] PCI host bridge to bus 0000:00 [ 0.256254] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.256326] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.256401] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.256476] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.256596] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.256714] pci_bus 0000:00: root bus resource [mem 0xd7c00000-0xfebfffff window] [ 0.256837] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000 [ 0.256914] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000 [ 0.256923] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit] [ 0.256928] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.256931] pci 0000:00:02.0: reg 0x20: [io 0xff00-0xff07] [ 0.257023] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.257049] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit] [ 0.257138] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.257210] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300 [ 0.257243] pci 0000:00:1a.0: reg 0x20: [io 0xfe00-0xfe1f] [ 0.257305] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.257410] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300 [ 0.257445] pci 0000:00:1a.1: reg 0x20: [io 0xfd00-0xfd1f] [ 0.257506] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.257615] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300 [ 0.257648] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f] [ 0.257709] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.257820] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320 [ 0.257837] pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff] [ 0.257911] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.257948] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.258057] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.258070] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit] [ 0.258129] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.258163] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.258269] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.258326] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.258361] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.258468] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 [ 0.258524] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.258562] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.258667] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400 [ 0.258724] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.258759] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.258865] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300 [ 0.258898] pci 0000:00:1d.0: reg 0x20: [io 0xfb00-0xfb1f] [ 0.258959] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.259064] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300 [ 0.259097] pci 0000:00:1d.1: reg 0x20: [io 0xfa00-0xfa1f] [ 0.259157] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.259263] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300 [ 0.259296] pci 0000:00:1d.2: reg 0x20: [io 0xf900-0xf91f] [ 0.259357] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.259469] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320 [ 0.259486] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff] [ 0.259561] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.259597] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.259703] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.259769] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.259877] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100 [ 0.260022] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f [ 0.260034] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807] [ 0.260040] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703] [ 0.260046] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607] [ 0.260052] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503] [ 0.260058] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f] [ 0.260064] pci 0000:00:1f.2: reg 0x24: [io 0xf300-0xf30f] [ 0.260144] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.260156] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit] [ 0.260172] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.260245] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185 [ 0.260257] pci 0000:00:1f.5: reg 0x10: [io 0xf100-0xf107] [ 0.260263] pci 0000:00:1f.5: reg 0x14: [io 0xf000-0xf003] [ 0.260269] pci 0000:00:1f.5: reg 0x18: [io 0xef00-0xef07] [ 0.260275] pci 0000:00:1f.5: reg 0x1c: [io 0xee00-0xee03] [ 0.260281] pci 0000:00:1f.5: reg 0x20: [io 0xed00-0xed0f] [ 0.260287] pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f] [ 0.260405] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.260479] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.260482] pci 0000:00:1c.0: bridge window [mem 0xd7c00000-0xd7dfffff] [ 0.260486] pci 0000:00:1c.0: bridge window [mem 0xd7e00000-0xd7ffffff 64bit pref] [ 0.260542] pci 0000:02:00.0: [197b:2368] type 00 class 0x010185 [ 0.260574] pci 0000:02:00.0: reg 0x10: [io 0xdf00-0xdf07] [ 0.260586] pci 0000:02:00.0: reg 0x14: [io 0xde00-0xde03] [ 0.260598] pci 0000:02:00.0: reg 0x18: [io 0xdd00-0xdd07] [ 0.260610] pci 0000:02:00.0: reg 0x1c: [io 0xdc00-0xdc03] [ 0.260622] pci 0000:02:00.0: reg 0x20: [io 0xdb00-0xdb0f] [ 0.260736] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.260869] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.260941] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.260944] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.260948] pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xd81fffff 64bit pref] [ 0.261006] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.261023] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff] [ 0.261048] pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref] [ 0.261063] pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref] [ 0.261073] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.261145] pci 0000:03:00.0: supports D1 D2 [ 0.261147] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.263572] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.263654] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.263656] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.263661] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.263702] pci 0000:04:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.263717] pci 0000:04:07.0: reg 0x10: [mem 0xfbcff000-0xfbcff7ff] [ 0.263725] pci 0000:04:07.0: reg 0x14: [mem 0xfbcf8000-0xfbcfbfff] [ 0.263784] pci 0000:04:07.0: supports D1 D2 [ 0.263786] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot [ 0.263843] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.263921] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.263925] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.263927] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.263928] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.263930] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.263932] pci 0000:00:1e.0: bridge window [mem 0xd7c00000-0xfebfffff window] (subtractive decode) [ 0.264290] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15), disabled. [ 0.264684] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15), disabled. [ 0.265069] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15), disabled. [ 0.265457] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15), disabled. [ 0.265846] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.266250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15), disabled. [ 0.266638] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15), disabled. [ 0.267024] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15), disabled. [ 0.267449] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.267631] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.267706] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.267826] vgaarb: loaded [ 0.267891] vgaarb: bridge control possible 0000:00:02.0 [ 0.268035] SCSI subsystem initialized [ 0.268142] libata version 3.00 loaded. [ 0.268183] ACPI: bus type USB registered [ 0.268273] usbcore: registered new interface driver usbfs [ 0.268354] usbcore: registered new interface driver hub [ 0.268439] usbcore: registered new device driver usb [ 0.268533] pps_core: LinuxPPS API ver. 1 registered [ 0.268607] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.268733] PTP clock support registered [ 0.268871] PCI: Using ACPI for IRQ routing [ 0.270034] PCI: Discovered peer bus 3f [ 0.270101] PCI: root bus 3f: using default resources [ 0.270103] PCI: Probing PCI hardware (bus 3f) [ 0.270124] PCI host bridge to bus 0000:3f [ 0.270193] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.270268] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.270344] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.270464] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.270469] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000 [ 0.270505] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000 [ 0.270539] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000 [ 0.270576] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000 [ 0.270608] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000 [ 0.270640] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000 [ 0.270677] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.270680] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.270682] PCI: pci_cache_line_size set to 64 bytes [ 0.270728] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.270730] e820: reserve RAM buffer [mem 0xd7be0000-0xd7ffffff] [ 0.270840] NetLabel: Initializing [ 0.270907] NetLabel: domain hash size = 128 [ 0.270974] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.271054] NetLabel: unlabeled traffic allowed by default [ 0.271201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.271428] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.273522] Switched to clocksource hpet [ 0.276686] pnp: PnP ACPI init [ 0.276903] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.276977] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.277051] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.277124] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.277196] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.277270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.277325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.277419] pnp 00:02: [dma 2] [ 0.277443] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.277598] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.277664] system 00:04: [io 0x0400-0x04cf] could not be reserved [ 0.277740] system 00:04: [io 0x04d2-0x04ff] has been reserved [ 0.277814] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.277954] system 00:05: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.278030] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.278154] system 00:06: [mem 0x000ccc00-0x000cffff] has been reserved [ 0.278230] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.278305] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.278381] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.278456] system 00:06: [mem 0xd7be0000-0xd7bfffff] could not be reserved [ 0.278539] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.278615] system 00:06: [mem 0x00100000-0xd7bdffff] could not be reserved [ 0.278691] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.278767] system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.278842] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.278917] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.278991] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.279066] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved [ 0.279140] system 00:06: [mem 0x000e0000-0x000effff] has been reserved [ 0.279215] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.279222] pnp: PnP ACPI: found 7 devices [ 0.285289] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.285361] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.285437] pci 0000:00:1c.0: bridge window [mem 0xd7c00000-0xd7dfffff] [ 0.285513] pci 0000:00:1c.0: bridge window [mem 0xd7e00000-0xd7ffffff 64bit pref] [ 0.285642] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.285713] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.285788] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.285864] pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xd81fffff 64bit pref] [ 0.285988] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref] [ 0.286106] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 0.286177] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.286253] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.286329] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.286451] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.286530] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.286610] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.286612] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.286614] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.286615] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.286617] pci_bus 0000:00: resource 8 [mem 0xd7c00000-0xfebfffff window] [ 0.286618] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.286620] pci_bus 0000:01: resource 1 [mem 0xd7c00000-0xd7dfffff] [ 0.286622] pci_bus 0000:01: resource 2 [mem 0xd7e00000-0xd7ffffff 64bit pref] [ 0.286624] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.286625] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.286627] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd81fffff 64bit pref] [ 0.286628] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.286630] pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.286631] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.286633] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.286634] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.286636] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.286638] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.286639] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.286641] pci_bus 0000:04: resource 8 [mem 0xd7c00000-0xfebfffff window] [ 0.286643] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.286645] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.286673] NET: Registered protocol family 2 [ 0.286905] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.287111] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.287305] TCP: Hash tables configured (established 32768 bind 32768) [ 0.287401] TCP: reno registered [ 0.287472] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.287572] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.287702] NET: Registered protocol family 1 [ 0.287820] RPC: Registered named UNIX socket transport module. [ 0.287893] RPC: Registered udp transport module. [ 0.287963] RPC: Registered tcp transport module. [ 0.288032] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.288113] pci 0000:00:02.0: Video device with shadowed ROM [ 0.289253] PCI: CLS 64 bytes, default 64 [ 0.609584] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.609664] software IO TLB [mem 0xd3be0000-0xd7be0000] (64MB) mapped at [ffff8800d3be0000-ffff8800d7bdffff] [ 0.610477] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.610604] audit: initializing netlink subsys (disabled) [ 0.610687] audit: type=2000 audit(1427249306.498:1): initialized [ 0.610953] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.612401] VFS: Disk quotas dquot_6.5.2 [ 0.612502] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.613095] NFS: Registering the id_resolver key type [ 0.613174] Key type id_resolver registered [ 0.613243] Key type id_legacy registered [ 0.613314] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.613511] fuse init (API version 7.23) [ 0.613845] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.613965] io scheduler noop registered [ 0.614034] io scheduler deadline registered [ 0.614130] io scheduler cfq registered (default) [ 0.614631] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.614863] Monitor-Mwait will be used to enter C-1 state [ 0.614869] Monitor-Mwait will be used to enter C-2 state [ 0.614875] Monitor-Mwait will be used to enter C-3 state [ 0.614886] ACPI: acpi_idle registered with cpuidle [ 0.615466] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.636068] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.636568] Non-volatile memory driver v1.3 [ 0.636662] Linux agpgart interface v0.103 [ 0.636790] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 0.636875] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.637545] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.637858] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.639288] brd: module loaded [ 0.639397] Loading iSCSI transport class v2.0-870. [ 0.639614] iscsi: registered transport (tcp) [ 0.639765] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.639853] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.639984] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. [ 0.640131] iscsi: registered transport (qla4xxx) [ 0.640212] QLogic iSCSI HBA Driver [ 0.640315] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.640418] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.640500] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.640611] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.640701] osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.640887] SCSI Media Changer driver v0.25 [ 0.642064] ata_piix 0000:00:1f.2: version 2.13 [ 0.642180] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.642719] scsi host0: ata_piix [ 0.642867] scsi host1: ata_piix [ 0.642968] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 [ 0.643047] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 [ 0.643200] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.643669] scsi host2: ata_piix [ 0.643804] scsi host3: ata_piix [ 0.643904] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 [ 0.643982] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 [ 0.644863] scsi host4: pata_jmicron [ 0.645007] scsi host5: pata_jmicron [ 0.645108] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16 [ 0.645186] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16 [ 0.645580] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.710.51-0 (2014/02/10) [ 0.645807] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.645884] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.645970] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.646047] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.646132] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.646205] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.646292] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k [ 0.646368] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.646462] usbcore: registered new interface driver catc [ 0.646557] usbcore: registered new interface driver kaweth [ 0.646635] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 0.646757] usbcore: registered new interface driver pegasus [ 0.646841] usbcore: registered new interface driver rtl8150 [ 0.646925] usbcore: registered new interface driver asix [ 0.647005] usbcore: registered new interface driver ax88179_178a [ 0.647085] usbcore: registered new interface driver cdc_ether [ 0.647166] usbcore: registered new interface driver dm9601 [ 0.647245] usbcore: registered new interface driver gl620a [ 0.647326] usbcore: registered new interface driver net1080 [ 0.647407] usbcore: registered new interface driver plusb [ 0.647487] usbcore: registered new interface driver rndis_host [ 0.647581] usbcore: registered new interface driver cdc_subset [ 0.647662] usbcore: registered new interface driver zaurus [ 0.647743] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 0.647875] usbcore: registered new interface driver cdc_ncm [ 0.648029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.648107] ehci-pci: EHCI PCI platform driver [ 0.648285] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.648388] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.648527] ehci-pci 0000:00:1a.7: debug port 2 [ 0.652547] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.652598] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 0.658594] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.658776] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.658855] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.658972] usb usb1: Product: EHCI Host Controller [ 0.659043] usb usb1: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ ehci_hcd [ 0.659163] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.659455] hub 1-0:1.0: USB hub found [ 0.659548] hub 1-0:1.0: 6 ports detected [ 0.659795] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.659950] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.660080] ehci-pci 0000:00:1d.7: debug port 2 [ 0.664065] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.664076] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 0.669568] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.669693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.669777] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.669894] usb usb2: Product: EHCI Host Controller [ 0.669964] usb usb2: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ ehci_hcd [ 0.670084] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.670448] hub 2-0:1.0: USB hub found [ 0.670538] hub 2-0:1.0: 6 ports detected [ 0.670712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.670792] ohci-pci: OHCI PCI platform driver [ 0.670879] uhci_hcd: USB Universal Host Controller Interface driver [ 0.671036] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.671149] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.671288] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00 [ 0.671388] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.671463] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.671588] usb usb3: Product: UHCI Host Controller [ 0.671658] usb usb3: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ uhci_hcd [ 0.671779] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.672136] hub 3-0:1.0: USB hub found [ 0.672223] hub 3-0:1.0: 2 ports detected [ 0.672424] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.672541] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.672688] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00 [ 0.672785] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.672860] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.672977] usb usb4: Product: UHCI Host Controller [ 0.673047] usb usb4: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ uhci_hcd [ 0.673168] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.673506] hub 4-0:1.0: USB hub found [ 0.673589] hub 4-0:1.0: 2 ports detected [ 0.673785] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.673898] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.674038] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00 [ 0.674138] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.674213] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.674322] usb usb5: Product: UHCI Host Controller [ 0.674383] usb usb5: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ uhci_hcd [ 0.674504] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.674707] hub 5-0:1.0: USB hub found [ 0.674775] hub 5-0:1.0: 2 ports detected [ 0.674968] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.675122] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.675258] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00 [ 0.675347] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.675417] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.675541] usb usb6: Product: UHCI Host Controller [ 0.675614] usb usb6: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ uhci_hcd [ 0.675727] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.676121] hub 6-0:1.0: USB hub found [ 0.676208] hub 6-0:1.0: 2 ports detected [ 0.676397] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.676503] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.676647] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00 [ 0.676738] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.676807] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.676924] usb usb7: Product: UHCI Host Controller [ 0.676994] usb usb7: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ uhci_hcd [ 0.677101] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.677249] hub 7-0:1.0: USB hub found [ 0.677314] hub 7-0:1.0: 2 ports detected [ 0.677499] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.677673] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.677793] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900 [ 0.677891] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.677966] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.678075] usb usb8: Product: UHCI Host Controller [ 0.678136] usb usb8: Manufacturer: Linux 4.0.0-rc5_drm-intel-nightly_877605_20150325+ uhci_hcd [ 0.678254] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.678416] hub 8-0:1.0: USB hub found [ 0.678492] hub 8-0:1.0: 2 ports detected [ 0.678671] usbcore: registered new interface driver usb-storage [ 0.678770] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.706742] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.706897] mousedev: PS/2 mouse device common for all mice [ 0.707092] rtc_cmos 00:01: RTC can wake from S4 [ 0.707324] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.707413] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.707546] i2c /dev entries driver [ 0.707638] hidraw: raw HID events driver (C) Jiri Kosina [ 0.707915] usbcore: registered new interface driver usbhid [ 0.707991] usbhid: USB HID core driver [ 0.708107] TCP: cubic registered [ 0.708171] Initializing XFRM netlink socket [ 0.708242] NET: Registered protocol family 17 [ 0.708321] Key type dns_resolver registered [ 0.708699] registered taskstats version 1 [ 0.709136] Btrfs loaded [ 0.709504] Magic number: 7:134:107 [ 0.709584] usbmon usbmon3: hash matches [ 0.709653] ata_device dev3.0: hash matches [ 0.709713] dev3.0: hash matches [ 0.709856] PM: Hibernation image not present or could not be loaded. [ 0.709866] Warning: unable to open an initial console. [ 0.959255] ata4: SATA link down (SStatus 0 SControl 300) [ 0.961617] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.972599] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.092182] usb 1-1: New USB device found, idVendor=0b95, idProduct=772b [ 1.092259] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.092332] usb 1-1: Product: AX88772B [ 1.092391] usb 1-1: Manufacturer: ASIX Elec. Corp. [ 1.092452] usb 1-1: SerialNumber: 00028C [ 1.110626] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.114141] ata3.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 [ 1.114216] ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.136144] ata3.00: configured for UDMA/133 [ 1.263238] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.263314] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.274121] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.274227] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.274657] scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 [ 1.275172] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.275182] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.275466] sd 2:0:0:0: [sda] Write Protect is off [ 1.275534] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.275601] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.276682] sda: sda1 sda2 [ 1.276994] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.429719] Freeing unused kernel memory: 23292K (ffffffff81c6d000 - ffffffff8332c000) [ 1.456777] dracut: dracut-018-35.git20120510.fc17 [ 1.478007] udevd[1252]: starting version 182 [ 1.488753] [drm] Initialized drm 1.1.0 20060810 [ 1.489872] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.490033] ACPI: Power Button [PWRB] [ 1.490182] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.490331] ACPI: Power Button [PWRF] [ 1.494264] [drm:i915_dump_device_info] i915 device info: gen=5, pciid=0x0042 rev=0x12 flags=need_gfx_hws,has_hotplug, [ 1.494283] [drm:intel_detect_pch] Found Ibex Peak PCH [ 1.494288] [drm] Memory usable by graphics device = 2048M [ 1.494359] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.494361] [drm:i915_gem_gtt_init] GTT stolen size = 64M [ 1.494362] [drm:i915_gem_gtt_init] ppgtt mode: 0 [ 1.494364] [drm] Replacing VGA console driver [ 1.495043] Console: switching to colour dummy device 80x25 [ 1.495719] [drm:intel_opregion_setup] graphic opregion physical addr: 0xd7be0800 [ 1.495728] [drm:intel_opregion_setup] SWSCI supported [ 1.501597] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000001) [ 1.501605] [drm:swsci_setup] SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 1.501761] [drm:intel_device_info_runtime_init] slice total: 0 [ 1.501762] [drm:intel_device_info_runtime_init] subslice total: 0 [ 1.501763] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 1.501764] [drm:intel_device_info_runtime_init] EU total: 0 [ 1.501765] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 1.501766] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.501767] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 1.501768] [drm:intel_device_info_runtime_init] has EU power gating: n [ 1.501769] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.501774] [drm] Driver supports precise vblank timestamp query. [ 1.501779] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.501781] [drm:validate_vbt] Using VBT from OpRegion: $VBT IRONLAKE-DESK d [ 1.501783] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.501785] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.501788] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.501790] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.501791] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.501793] [drm:parse_driver_features] DRRS State Enabled:0 [ 1.501794] [drm:parse_psr] No PSR BDB found. [ 1.501803] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.501810] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at dc000000 [ 1.501812] [drm:intel_display_power_get] enabling always-on [ 1.501850] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec) [ 1.501851] [drm:intel_print_wm_latency] Primary WM1 latency 19 (9.5 usec) [ 1.501852] [drm:intel_print_wm_latency] Primary WM2 latency 43 (21.5 usec) [ 1.501854] [drm:intel_print_wm_latency] Sprite WM0 latency 13 (1.3 usec) [ 1.501855] [drm:intel_print_wm_latency] Sprite WM1 latency 19 (9.5 usec) [ 1.501856] [drm:intel_print_wm_latency] Sprite WM2 latency 43 (21.5 usec) [ 1.501857] [drm:intel_print_wm_latency] Cursor WM0 latency 13 (1.3 usec) [ 1.501858] [drm:intel_print_wm_latency] Cursor WM1 latency 19 (9.5 usec) [ 1.501860] [drm:intel_print_wm_latency] Cursor WM2 latency 43 (21.5 usec) [ 1.501862] [drm:intel_modeset_init] 2 display pipes available. [ 1.501873] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.502187] [drm:intel_lvds_init] LVDS is not present in VBT [ 1.502235] [drm:intel_crt_reset] crt adpa set to 0x80f40000 [ 1.502238] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 1.502640] [drm:intel_sdvo_read_byte] i2c transfer returned -6 [ 1.502641] [drm:intel_sdvo_init] No SDVO device found on SDVOB [ 1.502727] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 1.502803] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.502838] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.502972] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.503006] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 1.503056] [drm:intel_dp_init_connector] Adding DP connector on port D [ 1.503089] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-3 [ 1.503140] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [ 1.503155] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: enabled [ 1.503158] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled [ 1.503163] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1 [ 1.503167] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 1.503171] [drm:intel_modeset_readout_hw_state] [ENCODER:27:DAC-27] hw state readout: enabled, pipe A [ 1.503173] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A [ 1.503175] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: disabled, pipe A [ 1.503177] [drm:intel_modeset_readout_hw_state] [ENCODER:35:TMDS-35] hw state readout: disabled, pipe A [ 1.503179] [drm:intel_modeset_readout_hw_state] [ENCODER:37:TMDS-37] hw state readout: disabled, pipe A [ 1.503181] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 1.503184] [drm:intel_modeset_readout_hw_state] [ENCODER:41:TMDS-41] hw state readout: disabled, pipe A [ 1.503186] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:VGA-1] hw state readout: enabled [ 1.503188] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:HDMI-A-1] hw state readout: disabled [ 1.503190] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:DP-1] hw state readout: disabled [ 1.503192] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:HDMI-A-2] hw state readout: disabled [ 1.503193] [drm:intel_modeset_readout_hw_state] [CONNECTOR:38:HDMI-A-3] hw state readout: disabled [ 1.503196] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-2] hw state readout: disabled [ 1.503197] [drm:intel_modeset_readout_hw_state] [CONNECTOR:42:DP-3] hw state readout: disabled [ 1.503201] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A [ 1.503202] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.503203] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.503205] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 586736, gmch_n: 8388608, link_m: 48894, link_n: 524288, tu: 64 [ 1.503207] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.503208] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.503209] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.503210] [drm:intel_dump_pipe_config] requested mode: [ 1.503212] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0 [ 1.503213] [drm:intel_dump_pipe_config] adjusted mode: [ 1.503215] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.503217] [drm:intel_dump_crtc_timings] crtc timings: 25200 640 656 752 800 480 490 492 525, type: 0x0 flags: 0xa [ 1.503218] [drm:intel_dump_pipe_config] port clock: 25200 [ 1.503219] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 1.503220] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.503222] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x028001e0, enabled [ 1.503223] [drm:intel_dump_pipe_config] ips: 0 [ 1.503223] [drm:intel_dump_pipe_config] double wide: 0 [ 1.503225] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B [ 1.503226] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.503227] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.503229] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.503230] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.503232] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.503233] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.503234] [drm:intel_dump_pipe_config] requested mode: [ 1.503236] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.503237] [drm:intel_dump_pipe_config] adjusted mode: [ 1.503238] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.503240] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.503241] [drm:intel_dump_pipe_config] port clock: 0 [ 1.503242] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.503243] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.503245] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.503246] [drm:intel_dump_pipe_config] ips: 0 [ 1.503247] [drm:intel_dump_pipe_config] double wide: 0 [ 1.503251] [drm:intel_connector_check_state] [CONNECTOR:26:VGA-1] [ 1.503258] [drm:check_encoder_state] [ENCODER:27:DAC-27] [ 1.503259] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 1.503261] [drm:check_encoder_state] [ENCODER:33:TMDS-33] [ 1.503263] [drm:check_encoder_state] [ENCODER:35:TMDS-35] [ 1.503265] [drm:check_encoder_state] [ENCODER:37:TMDS-37] [ 1.503266] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 1.503268] [drm:check_encoder_state] [ENCODER:41:TMDS-41] [ 1.503270] [drm:check_crtc_state] [CRTC:20] [ 1.503282] [drm:check_crtc_state] [CRTC:24] [ 1.503283] [drm:check_shared_dpll_state] PCH DPLL A [ 1.503286] [drm:check_shared_dpll_state] PCH DPLL B [ 1.503292] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 7ffff000] [ 1.504933] [drm:i915_gem_context_init] fake context support initialized [ 1.504953] [drm:init_status_page] render ring hws offset: 0x00001000 [ 1.504954] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 1.504956] [drm:i915_pages_create_for_stolen] offset=0x0, size=131072 [ 1.504971] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00024000 [ 1.504975] [drm:init_status_page] bsd ring hws offset: 0x00025000 [ 1.504976] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 1.504978] [drm:i915_pages_create_for_stolen] offset=0x20000, size=131072 [ 1.505022] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] [ 1.505024] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1 [ 1.505027] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40000 [ 1.505054] [drm] Initialized i915 1.6.0 20150313 for 0000:00:02.0 on minor 0 [ 1.514584] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1 [ 1.514589] [drm:intel_crt_detect] CRT detected via hotplug [ 1.514596] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] status updated from 3 to 1 [ 1.527522] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.527537] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] probed modes : [ 1.527544] [drm:drm_mode_debug_printmodeline] Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.527550] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.527555] [drm:drm_mode_debug_printmodeline] Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.527561] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.527567] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.527573] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.527578] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.527584] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.527589] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.527595] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.527599] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] [ 1.527602] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1] [ 1.527790] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.527796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.527801] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] status updated from 3 to 2 [ 1.527807] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected [ 1.527811] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] [ 1.527815] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 1.527820] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] status updated from 3 to 2 [ 1.527824] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected [ 1.527827] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] [ 1.527830] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2] [ 1.528090] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.528094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.528099] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] status updated from 3 to 2 [ 1.528102] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected [ 1.528106] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] [ 1.528109] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3] [ 1.528308] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.528313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 1.528317] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] status updated from 3 to 2 [ 1.528321] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] disconnected [ 1.528325] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] [ 1.528328] [drm:intel_dp_detect] [CONNECTOR:40:DP-2] [ 1.528333] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] status updated from 3 to 2 [ 1.528336] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected [ 1.528340] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] [ 1.528342] [drm:intel_dp_detect] [CONNECTOR:42:DP-3] [ 1.528347] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] status updated from 3 to 2 [ 1.528350] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected [ 1.528355] [drm:drm_setup_crtcs] [ 1.528359] [drm:drm_enable_connectors] connector 26 enabled? yes [ 1.528362] [drm:drm_enable_connectors] connector 29 enabled? no [ 1.528365] [drm:drm_enable_connectors] connector 34 enabled? no [ 1.528368] [drm:drm_enable_connectors] connector 36 enabled? no [ 1.528371] [drm:drm_enable_connectors] connector 38 enabled? no [ 1.528373] [drm:drm_enable_connectors] connector 40 enabled? no [ 1.528376] [drm:drm_enable_connectors] connector 42 enabled? no [ 1.528381] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1 [ 1.528384] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1 0 [ 1.528388] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:20]: 1280x1024 [ 1.528392] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.528394] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.528397] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.528400] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping [ 1.528403] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.528406] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping [ 1.528410] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 20 (0,0) [ 1.528415] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.528419] [drm:i915_gem_object_create_stolen] creating stolen object: size=500000 [ 1.528424] [drm:i915_pages_create_for_stolen] offset=0x40000, size=5242880 [ 1.528445] [drm:drm_fb_helper_hotplug_event] [ 1.528448] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] [ 1.528450] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1 [ 1.528453] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40000, result 1 [ 1.528454] [drm:intel_crt_detect] CRT detected via hotplug [ 1.529455] [drm:intelfb_create] allocated 1280x1024 fb: 0x00047000, bo ffff8800d2e308c0 [ 1.529500] fbcon: inteldrmfb (fb0) is primary device [ 1.541229] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.541240] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] probed modes : [ 1.541244] [drm:drm_mode_debug_printmodeline] Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.541248] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.541252] [drm:drm_mode_debug_printmodeline] Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.541256] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.541260] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.541264] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.541268] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.541272] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.541276] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.541279] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.541282] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] [ 1.541283] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1] [ 1.541467] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.541469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.541471] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected [ 1.541473] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] [ 1.541475] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 1.541478] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected [ 1.541480] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] [ 1.541481] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2] [ 1.541676] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.541678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.541681] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected [ 1.541683] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] [ 1.541685] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3] [ 1.541867] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.541869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 1.541872] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] disconnected [ 1.541874] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] [ 1.541875] [drm:intel_dp_detect] [CONNECTOR:40:DP-2] [ 1.541878] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected [ 1.541880] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] [ 1.541881] [drm:intel_dp_detect] [CONNECTOR:42:DP-3] [ 1.541884] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected [ 1.541890] [drm:drm_setup_crtcs] [ 1.541893] [drm:drm_enable_connectors] connector 26 enabled? yes [ 1.541894] [drm:drm_enable_connectors] connector 29 enabled? no [ 1.541896] [drm:drm_enable_connectors] connector 34 enabled? no [ 1.541897] [drm:drm_enable_connectors] connector 36 enabled? no [ 1.541899] [drm:drm_enable_connectors] connector 38 enabled? no [ 1.541900] [drm:drm_enable_connectors] connector 40 enabled? no [ 1.541902] [drm:drm_enable_connectors] connector 42 enabled? no [ 1.541904] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1 [ 1.541906] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1 0 [ 1.541909] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:20]: 1280x1024 [ 1.541910] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.541912] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.541913] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.541915] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping [ 1.541916] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.541917] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping [ 1.541920] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 20 (0,0) [ 1.541951] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 1.541954] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip [ 1.541955] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 1.541959] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.541963] [drm:drm_mode_debug_printmodeline] Modeline 54:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.541965] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=1 [ 1.541967] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.541971] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.541974] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 1.541978] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 1.541980] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.541982] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.541984] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.541985] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.541989] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.541991] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.541994] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.541995] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.541997] [drm:intel_dump_pipe_config] requested mode: [ 1.542000] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.542002] [drm:intel_dump_pipe_config] adjusted mode: [ 1.542005] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.542011] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 1.542012] [drm:intel_dump_pipe_config] port clock: 108000 [ 1.542012] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 1.542013] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.542014] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.542014] [drm:intel_dump_pipe_config] ips: 0 [ 1.542015] [drm:intel_dump_pipe_config] double wide: 0 [ 1.542027] [drm:intel_get_shared_dpll] CRTC:20 using pre-allocated PCH DPLL A [ 1.542027] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [ 1.566846] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 20 [ 1.566850] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 1.567268] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 1.568074] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x700 [ 1.568075] [drm:ironlake_fdi_link_train] FDI train 1 done. [ 1.568228] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x600 [ 1.568229] [drm:ironlake_fdi_link_train] FDI train 2 done. [ 1.568229] [drm:ironlake_fdi_link_train] FDI train done [ 1.568230] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 20 [ 1.568231] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 1.569603] [drm:intel_connector_check_state] [CONNECTOR:26:VGA-1] [ 1.569608] [drm:check_encoder_state] [ENCODER:27:DAC-27] [ 1.569609] [drm:check_encoder_state] [ENCODER:28:TMDS-28] [ 1.569611] [drm:check_encoder_state] [ENCODER:33:TMDS-33] [ 1.569612] [drm:check_encoder_state] [ENCODER:35:TMDS-35] [ 1.569613] [drm:check_encoder_state] [ENCODER:37:TMDS-37] [ 1.569614] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 1.569615] [drm:check_encoder_state] [ENCODER:41:TMDS-41] [ 1.569617] [drm:check_crtc_state] [CRTC:20] [ 1.569627] [drm:check_crtc_state] [CRTC:24] [ 1.569628] [drm:check_shared_dpll_state] PCH DPLL A [ 1.569630] [drm:check_shared_dpll_state] PCH DPLL B [ 1.569633] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 1.569635] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 1.569635] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.569636] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 1.569639] [drm:drm_fb_helper_hotplug_event] [ 1.569639] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] [ 1.569640] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1 [ 1.569642] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1 [ 1.569642] [drm:intel_crt_detect] CRT detected via hotplug [ 1.582591] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.582602] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] probed modes : [ 1.582606] [drm:drm_mode_debug_printmodeline] Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.582610] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.582614] [drm:drm_mode_debug_printmodeline] Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.582619] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.582622] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.582626] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.582630] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.582634] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.582638] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.582641] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.582644] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] [ 1.582645] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1] [ 1.582886] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 1.582888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.582891] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected [ 1.582893] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] [ 1.582895] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 1.582898] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected [ 1.582899] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] [ 1.582901] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2] [ 1.583097] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 1.583099] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.583101] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected [ 1.583104] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] [ 1.583105] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3] [ 1.583302] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 1.583304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 1.583306] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] disconnected [ 1.583308] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] [ 1.583310] [drm:intel_dp_detect] [CONNECTOR:40:DP-2] [ 1.583313] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected [ 1.583314] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] [ 1.583315] [drm:intel_dp_detect] [CONNECTOR:42:DP-3] [ 1.583318] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected [ 1.583324] [drm:drm_setup_crtcs] [ 1.583327] [drm:drm_enable_connectors] connector 26 enabled? yes [ 1.583328] [drm:drm_enable_connectors] connector 29 enabled? no [ 1.583330] [drm:drm_enable_connectors] connector 34 enabled? no [ 1.583331] [drm:drm_enable_connectors] connector 36 enabled? no [ 1.583333] [drm:drm_enable_connectors] connector 38 enabled? no [ 1.583334] [drm:drm_enable_connectors] connector 40 enabled? no [ 1.583336] [drm:drm_enable_connectors] connector 42 enabled? no [ 1.583338] [drm:intel_fb_initial_config] looking for cmdline mode on connector VGA-1 [ 1.583340] [drm:intel_fb_initial_config] looking for preferred mode on connector VGA-1 0 [ 1.583342] [drm:intel_fb_initial_config] connector VGA-1 on pipe A [CRTC:20]: 1280x1024 [ 1.583344] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.583346] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.583347] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.583348] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping [ 1.583350] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.583351] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping [ 1.583354] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 20 (0,0) [ 1.583404] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 1.583408] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 1.583410] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.583413] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.583416] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 1.583420] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 1.583422] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.583424] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.583425] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.583427] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.583430] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.583436] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.583437] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.583438] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.583438] [drm:intel_dump_pipe_config] requested mode: [ 1.583440] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.583440] [drm:intel_dump_pipe_config] adjusted mode: [ 1.583441] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.583443] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 1.583443] [drm:intel_dump_pipe_config] port clock: 108000 [ 1.583444] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 1.583445] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.583445] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.583446] [drm:intel_dump_pipe_config] ips: 0 [ 1.583446] [drm:intel_dump_pipe_config] double wide: 0 [ 1.583447] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 1.583449] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 1.583449] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.583450] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 1.583530] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 1.583534] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 1.583536] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.583540] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.583543] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 1.583547] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 1.583549] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.583551] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.583552] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.583554] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.583557] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.583560] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.583562] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.583564] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.583565] [drm:intel_dump_pipe_config] requested mode: [ 1.583569] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.583570] [drm:intel_dump_pipe_config] adjusted mode: [ 1.583574] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.583578] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 1.583579] [drm:intel_dump_pipe_config] port clock: 108000 [ 1.583580] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 1.583583] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.583584] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.583586] [drm:intel_dump_pipe_config] ips: 0 [ 1.583587] [drm:intel_dump_pipe_config] double wide: 0 [ 1.583589] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 1.583593] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 1.583595] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.583601] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 1.583605] Console: switching to colour frame buffer device 160x64 [ 1.583613] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 1.583615] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 1.583615] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.583617] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.583618] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 1.583619] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 1.583620] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.583621] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.583621] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.583622] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.583623] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.583624] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.583625] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.583625] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.583626] [drm:intel_dump_pipe_config] requested mode: [ 1.583627] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.583627] [drm:intel_dump_pipe_config] adjusted mode: [ 1.583629] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.583630] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 1.583630] [drm:intel_dump_pipe_config] port clock: 108000 [ 1.583631] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 1.583632] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.583632] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.583633] [drm:intel_dump_pipe_config] ips: 0 [ 1.583633] [drm:intel_dump_pipe_config] double wide: 0 [ 1.586296] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.586318] i915 0000:00:02.0: registered panic notifier [ 1.590547] dracut: Starting plymouth daemon [ 1.595519] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 1.595524] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 1.595525] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.595527] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.595528] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 1.595532] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 1.595533] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.595534] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.595535] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.595535] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.595536] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.595537] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.595538] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.595539] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.595539] [drm:intel_dump_pipe_config] requested mode: [ 1.595541] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.595541] [drm:intel_dump_pipe_config] adjusted mode: [ 1.595543] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.595544] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 1.595545] [drm:intel_dump_pipe_config] port clock: 108000 [ 1.595545] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 1.595546] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.595547] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.595547] [drm:intel_dump_pipe_config] ips: 0 [ 1.595548] [drm:intel_dump_pipe_config] double wide: 0 [ 1.602912] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 1.602915] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 1.602917] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.602918] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.602920] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 1.602923] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 1.602924] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.602925] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.602925] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.602926] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.602927] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.602928] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.602929] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.602930] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.602930] [drm:intel_dump_pipe_config] requested mode: [ 1.602932] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.602932] [drm:intel_dump_pipe_config] adjusted mode: [ 1.602933] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.602935] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 1.602935] [drm:intel_dump_pipe_config] port clock: 108000 [ 1.602936] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 1.602936] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.602937] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.602938] [drm:intel_dump_pipe_config] ips: 0 [ 1.602938] [drm:intel_dump_pipe_config] double wide: 0 [ 1.610521] tsc: Refined TSC clocksource calibration: 3199.962 MHz [ 1.655095] Floppy drive(s): fd0 is 1.44M [ 1.661117] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.661164] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.661602] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90004756000, 6c:f0:49:72:82:c6, XID 083000c0 IRQ 25 [ 1.661661] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.661675] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20150204/utaddress-258) [ 1.661676] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.661704] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.662956] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.665463] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 1.669259] FDC 0 is a post-1991 82077 [ 1.680343] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 1.680403] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1.680449] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 1.680492] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 1.680597] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e [ 1.680635] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 1.680669] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 1.680706] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 1.680738] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 1.680772] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 1.680806] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 1.680930] iTCO_vendor_support: vendor-support=0 [ 1.681087] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 1.681152] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0460) [ 1.681328] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.682068] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 1.682073] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 1.682075] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 1.682077] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.682080] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 1.682084] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 1.682086] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 1.682087] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 1.682087] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.682088] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.682089] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 1.682090] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.682091] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.682092] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.682093] [drm:intel_dump_pipe_config] requested mode: [ 1.682095] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.682096] [drm:intel_dump_pipe_config] adjusted mode: [ 1.682098] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 1.682099] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 1.682100] [drm:intel_dump_pipe_config] port clock: 108000 [ 1.682101] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 1.682102] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.682103] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.682104] [drm:intel_dump_pipe_config] ips: 0 [ 1.682104] [drm:intel_dump_pipe_config] double wide: 0 [ 1.685828] r8169 0000:03:00.0 p21p1: renamed from eth0 [ 1.690936] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.715555] firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.718411] dracut: Checking ext4: /dev/sda2 [ 1.718545] dracut: issuing e2fsck -a /dev/sda2 [ 1.726172] dracut: /dev/sda2: clean, 1112431/14524416 files, 26237586/58095360 blocks [ 1.726500] dracut: Remounting /dev/sda2 with -o ro [ 1.734844] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.740196] dracut: Mounted root filesystem /dev/sda2 [ 1.751443] device-mapper: uevent: version 1.0.3 [ 1.752913] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 1.869752] asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:1a.7-1, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:72:51 [ 2.216774] firewire_core 0000:04:07.0: created device fw0: GUID 0035f206006cf049, S400 [ 2.610721] Switched to clocksource tsc [ 16.074419] usb 2-1: device descriptor read/64, error -110 [ 31.278239] usb 2-1: device descriptor read/64, error -110 [ 31.482237] usb 2-1: new high-speed USB device number 3 using ehci-pci [ 31.911793] dracut: Switching root [ 31.983438] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 31.994695] systemd[1]: Failed to insert module 'ipv6' [ 31.996468] systemd[1]: Set hostname to . [ 31.999566] random: systemd urandom read with 40 bits of entropy available [ 32.018310] LVM: Logical Volume autoactivation enabled. [ 32.019730] LVM: Activation generator successfully completed. [ 32.084255] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 32.085700] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 32.087113] systemd[1]: Starting Syslog Socket. [ 32.089956] systemd[1]: Listening on Syslog Socket. [ 32.091379] systemd[1]: Starting Replay Read-Ahead Data... [ 32.094490] systemd[1]: Starting Collect Read-Ahead Data... [ 32.096141] systemd-readahead[2386]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. [ 32.099355] systemd[1]: Starting Delayed Shutdown Socket. [ 32.099980] systemd-readahead[2387]: Failed to create fanotify object: Function not implemented [ 32.104094] systemd[1]: Listening on Delayed Shutdown Socket. [ 32.105552] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 32.108549] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 32.110069] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 32.113283] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 32.114766] systemd[1]: Starting Journal Socket. [ 32.117612] systemd[1]: Listening on Journal Socket. [ 32.119096] systemd[1]: Mounting Huge Pages File System... [ 32.122223] systemd[1]: Starting Journal Service... [ 32.127301] systemd[1]: Started Journal Service. [ 32.128863] systemd[1]: Starting udev Kernel Socket. [ 32.131852] systemd[1]: Listening on udev Kernel Socket. [ 32.133383] systemd[1]: Starting udev Control Socket. [ 32.136833] systemd[1]: Listening on udev Control Socket. [ 32.138391] systemd[1]: Starting udev Coldplug all Devices... [ 32.138657] systemd-journald[2392]: Vacuuming done, freed 0 bytes [ 32.144839] systemd[1]: Mounting Debug File System... [ 32.149210] systemd[1]: Starting Encrypted Volumes. [ 32.154182] systemd[1]: Reached target Encrypted Volumes. [ 32.156237] systemd[1]: Starting Create static device nodes in /dev... [ 32.160729] systemd[1]: Mounting POSIX Message Queue File System... [ 32.164959] systemd[1]: Starting LVM2 metadata daemon socket. [ 32.168403] systemd[1]: Listening on LVM2 metadata daemon socket. [ 32.169832] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 32.172694] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 32.174083] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 32.177257] systemd[1]: Expecting device dev-disk-by\x2duuid-f3a1cbf6\x2d2bc7\x2d4b66\x2d9fba\x2dd14f1be17919.device... [ 32.180111] systemd[1]: Mounting Temporary Directory... [ 32.184711] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 32.188100] systemd[1]: Started Replay Read-Ahead Data. [ 32.189539] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE [ 32.192404] systemd[1]: Started Collect Read-Ahead Data. [ 32.195350] systemd[1]: Mounted Huge Pages File System. [ 32.198551] systemd[1]: Mounted Debug File System. [ 32.201671] systemd[1]: Mounted POSIX Message Queue File System. [ 32.204822] systemd[1]: Mounted Temporary Directory. [ 32.206504] systemd[1]: Starting Load legacy module configuration... [ 32.209872] systemd[1]: Started File System Check on Root Device. [ 32.211308] systemd[1]: Starting Remount Root and Kernel File Systems... [ 32.215355] systemd[1]: Started Load Kernel Modules. [ 32.216724] systemd[1]: Mounting FUSE Control File System... [ 32.219667] systemd[1]: Mounted Configuration File System. [ 32.221479] systemd[1]: Started Set Up Additional Binary Formats. [ 32.222845] systemd[1]: Starting Setup Virtual Console... [ 32.226039] systemd[1]: Starting Apply Kernel Variables... [ 32.230419] systemd[1]: Mounted FUSE Control File System. [ 32.233321] systemd[1]: Started Create static device nodes in /dev. [ 32.236360] systemd[1]: Started udev Coldplug all Devices. [ 32.239234] systemd[1]: Started Apply Kernel Variables. [ 32.240626] systemd[1]: Starting udev Kernel Device Manager... [ 32.243950] systemd[1]: Starting LVM2 metadata daemon... [ 32.244650] systemd-udevd[3232]: starting version 204 [ 32.257989] EXT4-fs (sda2): re-mounted. Opts: (null) [ 32.352431] [drm:i915_gem_open] [ 32.352500] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 32.352506] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 32.352510] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 32.352513] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 32.352516] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 32.352520] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 32.352522] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 32.352524] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 32.352525] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 32.352527] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 32.352529] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 32.352531] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 32.352534] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 32.352535] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 32.352536] [drm:intel_dump_pipe_config] requested mode: [ 32.352539] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 32.352541] [drm:intel_dump_pipe_config] adjusted mode: [ 32.352544] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 32.352547] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 32.352548] [drm:intel_dump_pipe_config] port clock: 108000 [ 32.352550] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 32.352552] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 32.352553] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 32.352555] [drm:intel_dump_pipe_config] ips: 0 [ 32.352556] [drm:intel_dump_pipe_config] double wide: 0 [ 32.352559] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 32.352562] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 32.352564] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 32.352566] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 32.352576] [drm:i915_gem_open] [ 32.352609] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 32.352612] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 32.352614] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 32.352617] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 32.352619] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 32.352622] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 32.352623] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 32.352625] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 32.352627] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 32.352628] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 32.352631] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 32.352633] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 32.352635] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 32.352637] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 32.352638] [drm:intel_dump_pipe_config] requested mode: [ 32.352641] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 32.352642] [drm:intel_dump_pipe_config] adjusted mode: [ 32.352645] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 32.352648] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 32.352649] [drm:intel_dump_pipe_config] port clock: 108000 [ 32.352651] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 32.352653] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 32.352654] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 32.352656] [drm:intel_dump_pipe_config] ips: 0 [ 32.352657] [drm:intel_dump_pipe_config] double wide: 0 [ 32.352659] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 32.352662] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 32.352664] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 32.352666] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 32.352675] [drm:i915_gem_open] [ 32.352713] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7] [ 32.352716] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7] [ 32.352725] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 32.352728] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] [ 32.352731] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1 [ 32.352735] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40018, result 1 [ 32.352736] [drm:intel_crt_detect] CRT detected via hotplug [ 32.366701] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 32.366713] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] probed modes : [ 32.366717] [drm:drm_mode_debug_printmodeline] Modeline 44:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 32.366720] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 32.366723] [drm:drm_mode_debug_printmodeline] Modeline 45:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 32.366726] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 32.366746] [drm:drm_mode_debug_printmodeline] Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 32.366749] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 32.366752] [drm:drm_mode_debug_printmodeline] Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 32.366756] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 32.366759] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 32.366762] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 32.366775] [drm:drm_mode_getconnector] [CONNECTOR:26:?] [ 32.371029] [drm:drm_mode_getconnector] [CONNECTOR:29:?] [ 32.371037] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] [ 32.371039] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1] [ 32.371197] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 32.371200] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 32.371203] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected [ 32.371209] [drm:drm_mode_getconnector] [CONNECTOR:29:?] [ 32.371212] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] [ 32.371214] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1] [ 32.371372] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 32.371375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 32.371377] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected [ 32.371384] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 32.371387] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] [ 32.371389] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 32.371392] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected [ 32.371395] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 32.371396] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] [ 32.371398] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 32.371400] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected [ 32.371404] [drm:drm_mode_getconnector] [CONNECTOR:36:?] [ 32.371406] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] [ 32.371408] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2] [ 32.371563] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 32.371566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 32.371568] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected [ 32.371572] [drm:drm_mode_getconnector] [CONNECTOR:36:?] [ 32.371574] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] [ 32.371575] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2] [ 32.371726] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 32.371729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 32.371731] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected [ 32.371737] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 32.371739] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] [ 32.371741] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3] [ 32.371895] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 32.371898] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 32.371900] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] disconnected [ 32.371904] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 32.371906] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] [ 32.371907] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3] [ 32.372065] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [ 32.372068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 32.372070] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] disconnected [ 32.372076] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 32.372079] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] [ 32.372080] [drm:intel_dp_detect] [CONNECTOR:40:DP-2] [ 32.372083] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected [ 32.372086] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 32.372087] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] [ 32.372089] [drm:intel_dp_detect] [CONNECTOR:40:DP-2] [ 32.372091] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected [ 32.372094] [drm:drm_mode_getconnector] [CONNECTOR:42:?] [ 32.372096] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] [ 32.372097] [drm:intel_dp_detect] [CONNECTOR:42:DP-3] [ 32.372100] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected [ 32.372102] [drm:drm_mode_getconnector] [CONNECTOR:42:?] [ 32.372104] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] [ 32.372106] [drm:intel_dp_detect] [CONNECTOR:42:DP-3] [ 32.372108] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected [ 32.372127] [drm:drm_mode_addfb2] [FB:56] [ 32.463110] Adding 2047996k swap on /dev/sda1. Priority:-1 extents:1 across:2047996k SS [ 32.470523] asix 1-1:1.0 enp0s26f7u1: renamed from eth0 [ 32.478380] systemd-udevd[3249]: renamed network interface eth0 to enp0s26f7u1 [ 32.517169] r8169 0000:03:00.0 enp3s0: renamed from p21p1 [ 32.527290] systemd-udevd[3248]: renamed network interface p21p1 to enp3s0 [ 44.834606] blk_update_request: I/O error, dev fd0, sector 0 [ 44.837062] floppy: error -5 while reading block 0 [ 46.585060] usb 2-1: device descriptor read/64, error -110 [ 51.600149] random: nonblocking pool is initialized [ 57.028189] blk_update_request: I/O error, dev fd0, sector 0 [ 57.031119] floppy: error -5 while reading block 0 [ 57.041248] audit: type=1305 audit(1427249362.929:2): audit_pid=3286 old=0 auid=4294967295 ses=4294967295 res=1 [ 57.058242] alsactl[3302]: segfault at 1 ip 0000003363c4888d sp 00007fffbde9f010 error 4 in libc-2.17.so[3363c00000+1b5000] [ 57.997908] asix 1-1:1.0 enp0s26f7u1: link down [ 58.001157] r8169 0000:03:00.0 enp3s0: link down [ 59.790876] asix 1-1:1.0 enp0s26f7u1: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 60.944910] systemd-journald[2392]: Received request to flush runtime journal from PID 1 [ 61.004401] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 61.004407] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 61.004409] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 61.004412] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 61.004414] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 61.004417] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 61.004418] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 61.004420] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 61.004421] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 61.004422] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 61.004423] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 61.004425] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 61.004426] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 61.004428] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 61.004428] [drm:intel_dump_pipe_config] requested mode: [ 61.004431] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 61.004432] [drm:intel_dump_pipe_config] adjusted mode: [ 61.004434] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 61.004436] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 61.004437] [drm:intel_dump_pipe_config] port clock: 108000 [ 61.004438] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 61.004439] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 61.004440] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 61.004441] [drm:intel_dump_pipe_config] ips: 0 [ 61.004442] [drm:intel_dump_pipe_config] double wide: 0 [ 61.004444] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 61.004445] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 61.004447] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 61.004448] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 61.009301] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 61.009306] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 61.009307] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 61.009309] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 61.009311] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 61.009314] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 61.009315] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 61.009316] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 61.009317] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 61.009318] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 61.009319] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 61.009320] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 61.009321] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 61.009322] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 61.009322] [drm:intel_dump_pipe_config] requested mode: [ 61.009324] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 61.009324] [drm:intel_dump_pipe_config] adjusted mode: [ 61.009326] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 61.009327] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 61.009328] [drm:intel_dump_pipe_config] port clock: 108000 [ 61.009328] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 61.009329] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 61.009330] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 61.009330] [drm:intel_dump_pipe_config] ips: 0 [ 61.009331] [drm:intel_dump_pipe_config] double wide: 0 [ 61.789882] usb 2-1: device descriptor read/64, error -110 [ 61.992867] usb 2-1: new high-speed USB device number 4 using ehci-pci [ 72.394743] usb 2-1: device not accepting address 4, error -110 [ 72.496753] usb 2-1: new high-speed USB device number 5 using ehci-pci [ 82.898562] usb 2-1: device not accepting address 5, error -110 [ 82.898636] usb usb2-port1: unable to enumerate USB device [ 83.128614] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 83.134612] usb 7-2: new low-speed USB device number 2 using uhci_hcd [ 83.299670] usb 7-2: New USB device found, idVendor=413c, idProduct=2107 [ 83.299721] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 83.299761] usb 7-2: Product: Dell USB Entry Keyboard [ 83.299790] usb 7-2: Manufacturer: DELL [ 83.318968] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/0003:413C:2107.0001/input/input4 [ 83.369696] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.1-2/input0 [ 98.236434] usb 6-1: device descriptor read/64, error -110 [ 113.445253] usb 6-1: device descriptor read/64, error -110 [ 113.648251] usb 6-1: new full-speed USB device number 3 using uhci_hcd [ 128.756072] usb 6-1: device descriptor read/64, error -110 [ 143.964890] usb 6-1: device descriptor read/64, error -110 [ 144.167889] usb 6-1: new full-speed USB device number 4 using uhci_hcd [ 154.573755] usb 6-1: device not accepting address 4, error -110 [ 154.675766] usb 6-1: new full-speed USB device number 5 using uhci_hcd [ 165.081634] usb 6-1: device not accepting address 5, error -110 [ 165.081706] usb usb6-port1: unable to enumerate USB device [ 514.108585] gem_tiled_swapping: executing [ 514.126426] gem_tiled_swapp (4821): drop_caches: 3 [ 514.126904] [drm:i915_gem_open] [ 514.127350] [drm:i915_gem_open] [ 514.127435] gem_tiled_swapping: exiting, ret=0 [ 514.127612] [drm:intel_crtc_set_config] [CRTC:20] [FB:55] #connectors=1 (x y) (0 0) [ 514.127617] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 514.127620] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 514.127623] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 514.127625] [drm:connected_sink_compute_bpp] [CONNECTOR:26:VGA-1] checking for sink bpp constrains [ 514.127629] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 [ 514.127631] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0 [ 514.127634] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 514.127635] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 514.127637] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 514.127639] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 514.127641] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 514.127644] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 514.127645] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 514.127646] [drm:intel_dump_pipe_config] requested mode: [ 514.127649] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 514.127651] [drm:intel_dump_pipe_config] adjusted mode: [ 514.127653] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 514.127656] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 514.127657] [drm:intel_dump_pipe_config] port clock: 108000 [ 514.127659] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 514.127662] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 514.127665] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 514.127666] [drm:intel_dump_pipe_config] ips: 0 [ 514.127668] [drm:intel_dump_pipe_config] double wide: 0 [ 514.127670] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 514.127672] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 514.127674] [drm:intel_modeset_stage_output_state] [CONNECTOR:26:VGA-1] to [CRTC:20] [ 514.127676] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0