[ 0.696093] efifb: mode is 1920x1080x32, linelength=7680, pages=2032 [ 0.696096] efifb: scrolling: redraw [ 0.696099] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.701748] Console: switching to colour frame buffer device 240x67 [ 0.707024] fb0: EFI VGA frame buffer device [ 0.707901] Monitor-Mwait will be used to enter C-1 state [ 0.743961] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.743993] ACPI: Thermal Zone [TZ00] (40 C) [ 0.744578] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.744607] ACPI: Thermal Zone [TZ01] (40 C) [ 0.744671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.765302] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.765739] Non-volatile memory driver v1.3 [ 0.765790] Linux agpgart interface v0.103 [ 0.767143] brd: module loaded [ 0.767211] Loading iSCSI transport class v2.0-870. [ 0.767375] iscsi: registered transport (tcp) [ 0.767465] Adaptec aacraid driver 1.2-0[30300]-ms [ 0.767501] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.767589] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k. [ 0.767649] iscsi: registered transport (qla4xxx) [ 0.767681] QLogic iSCSI HBA Driver [ 0.767737] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.767798] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 0.767842] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 0.767898] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 0.767942] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.767942] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.768067] SCSI Media Changer driver v0.25 [ 0.768116] ahci 0000:00:1f.2: version 3.0 [ 0.778849] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode [ 0.778891] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.779275] scsi host0: ahci [ 0.779368] scsi host1: ahci [ 0.779451] scsi host2: ahci [ 0.779532] scsi host3: ahci [ 0.779581] ata1: DUMMY [ 0.779597] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40 [ 0.779632] ata3: DUMMY [ 0.779644] ata4: DUMMY [ 0.780541] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.710.51-0 (2014/02/10) [ 0.780652] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.780685] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.781996] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.783297] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.784607] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.785905] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 0.787314] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.083656] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.085227] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133 [ 1.086543] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.088143] ata2.00: configured for UDMA/133 [ 1.089544] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5 [ 1.091040] ata2.00: Enabling discard_zeroes_data [ 1.091068] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.093762] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.095094] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.096452] sd 1:0:0:0: [sda] Write Protect is off [ 1.097786] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.097796] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.099238] ata2.00: Enabling discard_zeroes_data [ 1.100900] sda: sda1 sda2 sda3 [ 1.102408] ata2.00: Enabling discard_zeroes_data [ 1.103793] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.692330] tsc: Refined TSC clocksource calibration: 2294.691 MHz [ 2.163446] e1000e 0000:00:19.0 eth0: registered PHC clock [ 2.164702] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4 [ 2.166061] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.167431] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 2.168788] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k [ 2.170135] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.171506] usbcore: registered new interface driver catc [ 2.172869] usbcore: registered new interface driver kaweth [ 2.174199] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.175544] usbcore: registered new interface driver pegasus [ 2.176887] usbcore: registered new interface driver rtl8150 [ 2.178214] usbcore: registered new interface driver asix [ 2.179529] usbcore: registered new interface driver ax88179_178a [ 2.180841] usbcore: registered new interface driver cdc_ether [ 2.182145] usbcore: registered new interface driver dm9601 [ 2.183433] usbcore: registered new interface driver gl620a [ 2.184708] usbcore: registered new interface driver net1080 [ 2.185966] usbcore: registered new interface driver plusb [ 2.187200] usbcore: registered new interface driver rndis_host [ 2.188413] usbcore: registered new interface driver cdc_subset [ 2.189615] usbcore: registered new interface driver zaurus [ 2.190799] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.191997] usbcore: registered new interface driver cdc_ncm [ 2.193307] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 2.194480] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 2.195648] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.196829] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.198058] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 2.199209] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.199270] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.200418] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.201557] usb usb1: Product: xHCI Host Controller [ 2.202705] usb usb1: Manufacturer: Linux 4.0.0_drm-intel-nightly_d60065_20150417+ xhci-hcd [ 2.203893] usb usb1: SerialNumber: 0000:00:14.0 [ 2.205178] hub 1-0:1.0: USB hub found [ 2.206391] hub 1-0:1.0: 11 ports detected [ 2.210592] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.211810] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.213049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.214245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.215422] usb usb2: Product: xHCI Host Controller [ 2.216591] usb usb2: Manufacturer: Linux 4.0.0_drm-intel-nightly_d60065_20150417+ xhci-hcd [ 2.217777] usb usb2: SerialNumber: 0000:00:14.0 [ 2.219062] hub 2-0:1.0: USB hub found [ 2.220237] hub 2-0:1.0: 4 ports detected [ 2.222145] usb: failed to peer usb2-port3 and usb1-port11 by location (usb2-port3:none) (usb1-port11:usb2-port2) [ 2.223334] usb usb2-port3: failed to peer to usb1-port11 (-16) [ 2.224509] usb: port power management may be unreliable [ 2.226084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.227265] ehci-pci: EHCI PCI platform driver [ 2.228461] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.229636] ohci-pci: OHCI PCI platform driver [ 2.230801] uhci_hcd: USB Universal Host Controller Interface driver [ 2.232009] usbcore: registered new interface driver usb-storage [ 2.233207] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.234381] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.235996] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.237269] mousedev: PS/2 mouse device common for all mice [ 2.238535] rtc_cmos 00:02: RTC can wake from S4 [ 2.239849] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.241070] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.242292] i2c /dev entries driver [ 2.243531] hidraw: raw HID events driver (C) Jiri Kosina [ 2.244958] usbcore: registered new interface driver usbhid [ 2.246158] usbhid: USB HID core driver [ 2.247408] TCP: cubic registered [ 2.248603] Initializing XFRM netlink socket [ 2.249783] NET: Registered protocol family 17 [ 2.250969] Key type dns_resolver registered [ 2.252504] registered taskstats version 1 [ 2.254111] Btrfs loaded [ 2.255666] Magic number: 11:44:275 [ 2.256809] usb usb1-port3: hash matches [ 2.257974] tty tty12: hash matches [ 2.259230] PM: Hibernation image not present or could not be loaded. [ 2.259244] Warning: unable to open an initial console. [ 2.263540] Freeing unused kernel memory: 23312K (ffffffff81c6d000 - ffffffff83331000) [ 2.274869] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.294182] dracut: dracut-018-35.git20120510.fc17 [ 2.318561] udevd[1444]: starting version 182 [ 2.332741] [drm] Initialized drm 1.1.0 20060810 [ 2.335761] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.338530] ACPI: Lid Switch [LID0] [ 2.341031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 2.342930] ACPI: Power Button [PWRB] [ 2.344473] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 2.346088] ACPI: Sleep Button [SLPB] [ 2.346147] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.346196] ACPI: Power Button [PWRF] [ 2.349375] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 2.349376] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 2.349429] [drm] Memory usable by graphics device = 4096M [ 2.349430] [drm:i915_gem_gtt_init] GMADR size = 256M [ 2.349431] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 2.349432] [drm:i915_gem_gtt_init] ppgtt mode: 2 [ 2.349433] checking generic (c0000000 7e9000) vs hw (c0000000 10000000) [ 2.349434] fb: switching to inteldrmfb from EFI VGA [ 2.359507] Console: switching to colour dummy device 80x25 [ 2.359605] [drm] Replacing VGA console driver [ 2.360365] [drm:intel_opregion_setup] graphic opregion physical addr: 0xac776018 [ 2.360373] [drm:intel_opregion_setup] Public ACPI methods supported [ 2.360374] [drm:intel_opregion_setup] SWSCI supported [ 2.365973] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 2.365975] [drm:intel_opregion_setup] ASLE supported [ 2.366069] [drm:intel_device_info_runtime_init] slice total: 0 [ 2.366071] [drm:intel_device_info_runtime_init] subslice total: 0 [ 2.366073] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 2.366075] [drm:intel_device_info_runtime_init] EU total: 0 [ 2.366077] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 2.366078] [drm:intel_device_info_runtime_init] has slice power gating: n [ 2.366080] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 2.366082] [drm:intel_device_info_runtime_init] has EU power gating: n [ 2.366084] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.366090] [drm] Driver supports precise vblank timestamp query. [ 2.366096] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 2.366099] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 2.366102] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.366104] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 2.366107] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 2.366110] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 2.366112] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x8 0xa [ 2.366114] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c [ 2.366116] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 2.366118] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 2.366120] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.366121] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 2.366123] [drm:parse_driver_features] DRRS State Enabled:1 [ 2.366125] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 2.366127] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 2.366128] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.366130] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 2.366131] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.366132] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 2.366181] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 2.366185] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at ae000000 [ 2.366187] [drm:intel_display_power_get] enabling always-on [ 2.366188] [drm:intel_display_power_get] enabling display [ 2.366251] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 2.366252] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 2.366253] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 2.366255] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 2.366256] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 2.366258] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 2.366259] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 2.366260] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 2.366261] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 2.366263] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 2.366264] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 2.366265] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 2.366267] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 2.366268] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 2.366269] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 2.366271] [drm:intel_modeset_init] 3 display pipes available. [ 2.366283] [drm:intel_ddi_pll_init] CDCLK running at 675000KHz [ 2.366286] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.366600] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 2.366660] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 2.366663] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 2.366664] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 2.366666] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 2.366668] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 2.366748] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 2.366755] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 2.367158] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00 [ 2.367451] [drm:intel_dp_print_rates] source rates: 162000,270000,540000, [ 2.367452] [drm:intel_dp_print_rates] sink rates: 162000,270000, [ 2.367453] [drm:intel_dp_print_rates] common rates: 162000,270000, [ 2.367463] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 2.373251] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.373253] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 2.373259] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 2.373271] [drm:intel_dp_init_connector] Adding DP connector on port B [ 2.373308] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 2.378954] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: enabled [ 2.378956] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled [ 2.378957] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled [ 2.378960] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 2.378961] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 2.378965] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: enabled, pipe A [ 2.378967] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 2.378969] [drm:intel_modeset_readout_hw_state] [ENCODER:41:DP MST-41] hw state readout: disabled, pipe A [ 2.378970] [drm:intel_modeset_readout_hw_state] [ENCODER:42:DP MST-42] hw state readout: disabled, pipe B [ 2.378971] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP MST-43] hw state readout: disabled, pipe C [ 2.378973] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 2.378975] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: enabled [ 2.378977] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 2.378979] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 2.378981] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:HDMI-A-2] hw state readout: disabled [ 2.378984] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config ffff8800a7dc8c00 for pipe A [ 2.378985] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.378987] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 2.378988] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.378990] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.378992] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.378993] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.378995] [drm:intel_dump_pipe_config] requested mode: [ 2.378997] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1920 0 0 0 1080 0 0 0 0x0 0x0 [ 2.378998] [drm:intel_dump_pipe_config] adjusted mode: [ 2.379000] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 2.379002] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x0 flags: 0xa [ 2.379003] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.379005] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.379006] [drm:intel_dump_pipe_config] num_scalers: 0 [ 2.379007] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 2.379008] [drm:intel_dump_pipe_config] scaler id: 0 [ 2.379009] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.379011] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 2.379012] [drm:intel_dump_pipe_config] ips: 0 [ 2.379013] [drm:intel_dump_pipe_config] double wide: 0 [ 2.379014] [drm:intel_dump_pipe_config] planes on this crtc [ 2.379016] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 2.379018] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 2.379020] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 2.379022] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config ffff880002f68c00 for pipe B [ 2.379023] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 2.379024] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 2.379026] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.379028] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.379029] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.379031] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.379032] [drm:intel_dump_pipe_config] requested mode: [ 2.379033] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.379034] [drm:intel_dump_pipe_config] adjusted mode: [ 2.379036] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.379038] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.379039] [drm:intel_dump_pipe_config] port clock: 0 [ 2.379041] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 2.379042] [drm:intel_dump_pipe_config] num_scalers: 0 [ 2.379043] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 2.379044] [drm:intel_dump_pipe_config] scaler id: 0 [ 2.379045] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.379047] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.379048] [drm:intel_dump_pipe_config] ips: 0 [ 2.379049] [drm:intel_dump_pipe_config] double wide: 0 [ 2.379050] [drm:intel_dump_pipe_config] planes on this crtc [ 2.379051] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 1.0 idx: 3 disabled, scaler_id = -1 [ 2.379053] [drm:intel_dump_pipe_config] CURSOR PLANE:23 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 2.379055] [drm:intel_dump_pipe_config] STANDARD PLANE:25 plane: 1.1 idx: 5 disabled, scaler_id = 0 [ 2.379057] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config ffff880002f69c00 for pipe C [ 2.379058] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 2.379059] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 2.379061] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.379062] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.379064] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.379065] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.379066] [drm:intel_dump_pipe_config] requested mode: [ 2.379068] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.379069] [drm:intel_dump_pipe_config] adjusted mode: [ 2.379071] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.379072] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 2.379074] [drm:intel_dump_pipe_config] port clock: 0 [ 2.379075] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 2.379076] [drm:intel_dump_pipe_config] num_scalers: 0 [ 2.379077] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 2.379078] [drm:intel_dump_pipe_config] scaler id: 0 [ 2.379079] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.379081] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.379082] [drm:intel_dump_pipe_config] ips: 0 [ 2.379083] [drm:intel_dump_pipe_config] double wide: 0 [ 2.379084] [drm:intel_dump_pipe_config] planes on this crtc [ 2.379085] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 2.0 idx: 6 disabled, scaler_id = -1 [ 2.379087] [drm:intel_dump_pipe_config] CURSOR PLANE:27 plane: 2.3 idx: 7 disabled, scaler_id = -1 [ 2.379088] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 2.1 idx: 8 disabled, scaler_id = 0 [ 2.379094] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1] [ 2.379096] [drm:check_encoder_state] [ENCODER:30:TMDS-30] [ 2.379098] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 2.379099] [drm:check_encoder_state] [ENCODER:41:DP MST-41] [ 2.379101] [drm:check_encoder_state] [ENCODER:42:DP MST-42] [ 2.379102] [drm:check_encoder_state] [ENCODER:43:DP MST-43] [ 2.379103] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 2.379104] [drm:check_crtc_state] [CRTC:20] [ 2.379111] [drm:check_crtc_state] [CRTC:24] [ 2.379112] [drm:check_crtc_state] [CRTC:28] [ 2.379114] [drm:check_shared_dpll_state] WRPLL 1 [ 2.379115] [drm:check_shared_dpll_state] WRPLL 2 [ 2.379120] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 2.379122] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 2.379126] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 2.379129] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880002d58000 [ 2.379133] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 2.379135] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 2.380462] [drm:i915_gem_context_init] LR context support initialized [ 2.380535] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081d000 [ 2.380655] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 2.380659] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 2.380661] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 2.380664] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 2.380763] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 2.380776] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] [ 2.380778] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1] [ 2.380782] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] status updated from 3 to 1 [ 2.380791] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.380796] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes : [ 2.380800] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.380804] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 2.380806] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 2.380808] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 2.380813] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] status updated from 3 to 2 [ 2.380815] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 2.380817] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 2.380819] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 2.380971] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.380973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.380976] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] status updated from 3 to 2 [ 2.380979] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 2.380981] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 2.380983] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 2.381142] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 2.381144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.381147] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] status updated from 3 to 2 [ 2.381149] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 2.381152] [drm:drm_setup_crtcs] [ 2.381154] [drm:drm_enable_connectors] connector 31 enabled? yes [ 2.381156] [drm:drm_enable_connectors] connector 40 enabled? no [ 2.381158] [drm:drm_enable_connectors] connector 44 enabled? no [ 2.381159] [drm:drm_enable_connectors] connector 47 enabled? no [ 2.381162] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 2.381164] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 2.381167] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 1920x1080 [ 2.381169] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 2.381170] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 2.381172] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 2.381174] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 20 (0,0) [ 2.381177] [drm:intelfb_create] no BIOS fb, allocating a new one [ 2.381180] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 2.381185] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=8294400 [ 2.381890] [drm:intelfb_create] allocated 1920x1080 fb: 0x00885000, bo ffff880144600000 [ 2.381986] fbcon: inteldrmfb (fb0) is primary device [ 2.382047] [drm:intel_fbc_update] disabled per chip default [ 2.382068] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 2.382071] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 2.382073] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.382076] [drm:drm_mode_debug_printmodeline] Modeline 49:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.382078] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=1 [ 2.382082] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 2.382085] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 2.382088] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 2.382089] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 2.382091] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 2.382096] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 2.382096] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 2.382098] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8800a7d37660 [ 2.382099] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 2.382100] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff8800a7dfc800 for pipe A [ 2.382101] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 2.382102] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 2.382103] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 2.382105] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 2.382106] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 2.382106] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 2.382107] [drm:intel_dump_pipe_config] requested mode: [ 2.382109] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.382109] [drm:intel_dump_pipe_config] adjusted mode: [ 2.382111] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 2.382112] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 2.382113] [drm:intel_dump_pipe_config] port clock: 270000 [ 2.382113] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 2.382114] [drm:intel_dump_pipe_config] num_scalers: 0 [ 2.382115] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 2.382115] [drm:intel_dump_pipe_config] scaler id: 0 [ 2.382116] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 2.382117] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.382117] [drm:intel_dump_pipe_config] ips: 1 [ 2.382118] [drm:intel_dump_pipe_config] double wide: 0 [ 2.382119] [drm:intel_dump_pipe_config] planes on this crtc [ 2.382121] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 2.382122] [drm:intel_dump_pipe_config] FB:48, fb = 1920x1080 format = 0x34325258 [ 2.382123] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0 [ 2.382124] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 2.382125] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 2.382130] [drm:intel_edp_backlight_off] [ 2.383143] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.383278] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 2.383354] [drm] Initialized i915 1.6.0 20150410 for 0000:00:02.0 on minor 0 [ 2.562848] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 2.582831] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 2.585023] [drm:edp_panel_off] Turn eDP port A panel power off [ 2.585026] [drm:wait_panel_off] Wait for panel power off time [ 2.585029] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000 [ 2.645073] [drm:wait_panel_status] Wait complete [ 2.645082] [drm:intel_display_power_put] disabling display [ 2.645083] [drm:hsw_set_power_well] Requesting to disable the power well [ 2.645100] [drm:edp_panel_on] Turn eDP port A panel power on [ 2.645103] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 2.692813] Switched to clocksource tsc [ 2.726926] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101 [ 2.726928] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.726929] usb 1-2: Product: USB 2.0 Hub [ 2.727190] hub 1-2:1.0: USB hub found [ 2.727246] hub 1-2:1.0: 4 ports detected [ 2.879669] usb 1-6: new low-speed USB device number 3 using xhci_hcd [ 3.046931] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 3.046932] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.046933] usb 1-6: Product: USB Optical Mouse [ 3.046934] usb 1-6: Manufacturer: Logitech [ 3.046990] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.048847] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0001/input/input6 [ 3.048941] hid-generic 0003:046D:C06A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 3.116547] usb 1-2.4: new high-speed USB device number 4 using xhci_hcd [ 3.185497] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 3.215748] usb 1-2.4: New USB device found, idVendor=0b95, idProduct=772a [ 3.215750] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.215751] usb 1-2.4: Product: AX88x72A [ 3.215752] usb 1-2.4: Manufacturer: ASIX Elec. Corp. [ 3.215752] usb 1-2.4: SerialNumber: 0003E8 [ 3.235474] [drm:wait_panel_status] Wait complete [ 3.235477] [drm:wait_panel_on] Wait for panel power on [ 3.235480] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 3.453437] [drm:wait_panel_status] Wait complete [ 3.453440] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 3.453446] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 3.454487] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 3.454488] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 3.454489] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 3.455067] [drm:intel_dp_start_link_train] clock recovery OK [ 3.455946] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 3.456171] [drm:intel_edp_backlight_on] [ 3.456172] [drm:intel_panel_enable_backlight] pipe A [ 3.456178] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 3.456183] [drm:intel_psr_enable] PSR not supported by this panel [ 3.456184] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 3.491491] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1] [ 3.491493] [drm:check_encoder_state] [ENCODER:30:TMDS-30] [ 3.491494] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 3.491495] [drm:check_encoder_state] [ENCODER:41:DP MST-41] [ 3.491496] [drm:check_encoder_state] [ENCODER:42:DP MST-42] [ 3.491496] [drm:check_encoder_state] [ENCODER:43:DP MST-43] [ 3.491497] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 3.491498] [drm:check_crtc_state] [CRTC:20] [ 3.491504] [drm:check_crtc_state] [CRTC:24] [ 3.491505] [drm:check_crtc_state] [CRTC:28] [ 3.491505] [drm:check_shared_dpll_state] WRPLL 1 [ 3.491506] [drm:check_shared_dpll_state] WRPLL 2 [ 3.491516] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 3.491518] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 3.491520] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.491523] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.491525] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 3.491526] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 3.491527] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.491529] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.491531] [drm:drm_fb_helper_hotplug_event] [ 3.491532] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] [ 3.491533] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1] [ 3.491539] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 3.491542] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes : [ 3.491544] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.491545] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 3.491546] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 3.491547] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 3.491550] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 3.491551] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 3.491553] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 3.491709] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 3.491710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 3.491711] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 3.491711] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 3.491712] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 3.491868] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 3.491869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.491870] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 3.491872] [drm:drm_setup_crtcs] [ 3.491873] [drm:drm_enable_connectors] connector 31 enabled? yes [ 3.491873] [drm:drm_enable_connectors] connector 40 enabled? no [ 3.491874] [drm:drm_enable_connectors] connector 44 enabled? no [ 3.491875] [drm:drm_enable_connectors] connector 47 enabled? no [ 3.491876] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 3.491877] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 3.491878] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 1920x1080 [ 3.491879] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 3.491879] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 3.491880] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 3.491881] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 20 (0,0) [ 3.491907] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.491908] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.491909] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.491911] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.491913] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.491914] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 3.491915] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.491919] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.491920] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.491922] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8801473073c0 [ 3.491923] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 3.491924] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002d6b400 for pipe A [ 3.491924] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.491925] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 3.491926] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.491928] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.491929] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.491929] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.491930] [drm:intel_dump_pipe_config] requested mode: [ 3.491932] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.491932] [drm:intel_dump_pipe_config] adjusted mode: [ 3.491934] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.491935] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.491936] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.491937] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.491937] [drm:intel_dump_pipe_config] num_scalers: 0 [ 3.491938] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 3.491938] [drm:intel_dump_pipe_config] scaler id: 0 [ 3.491939] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.491940] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.491941] [drm:intel_dump_pipe_config] ips: 1 [ 3.491941] [drm:intel_dump_pipe_config] double wide: 0 [ 3.491942] [drm:intel_dump_pipe_config] planes on this crtc [ 3.491944] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 3.491946] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 3.491946] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 3.491947] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 3.491948] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 3.491949] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 3.491950] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 3.491952] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.491953] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.491954] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 3.491955] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 3.491957] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.491958] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 3.491963] Console: switching to colour frame buffer device 240x67 [ 3.491969] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.491970] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.491972] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.491973] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.491974] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.491975] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 3.491976] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.491980] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.491980] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.491981] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff880147307420 [ 3.491982] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 3.491983] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002d6b400 for pipe A [ 3.491984] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.491984] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 3.491986] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.491987] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.491988] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.491989] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.491989] [drm:intel_dump_pipe_config] requested mode: [ 3.491991] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.491991] [drm:intel_dump_pipe_config] adjusted mode: [ 3.491992] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.491994] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.491995] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.491995] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.491996] [drm:intel_dump_pipe_config] num_scalers: 0 [ 3.491996] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 3.491997] [drm:intel_dump_pipe_config] scaler id: 0 [ 3.491998] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.491998] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.491999] [drm:intel_dump_pipe_config] ips: 1 [ 3.491999] [drm:intel_dump_pipe_config] double wide: 0 [ 3.492000] [drm:intel_dump_pipe_config] planes on this crtc [ 3.492002] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 3.492003] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 3.492003] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 3.492004] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 3.492005] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 3.498596] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.498627] i915 0000:00:02.0: registered panic notifier [ 3.741192] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 3.978351] asix 1-2.4:1.0 eth1: register 'asix' at usb-0000:00:14.0-2.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:9a:ab [ 3.982195] dracut: Starting plymouth daemon [ 3.988351] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.988354] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.988357] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.988360] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.988362] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.988363] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 3.988366] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.988370] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.988371] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.988373] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff880147307540 [ 3.988374] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 3.988375] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002d6e800 for pipe A [ 3.988376] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.988376] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 3.988378] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.988379] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.988380] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.988381] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.988381] [drm:intel_dump_pipe_config] requested mode: [ 3.988384] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.988384] [drm:intel_dump_pipe_config] adjusted mode: [ 3.988386] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.988387] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.988388] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.988389] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.988389] [drm:intel_dump_pipe_config] num_scalers: 0 [ 3.988390] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 3.988390] [drm:intel_dump_pipe_config] scaler id: 0 [ 3.988391] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.988392] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.988393] [drm:intel_dump_pipe_config] ips: 1 [ 3.988393] [drm:intel_dump_pipe_config] double wide: 0 [ 3.988394] [drm:intel_dump_pipe_config] planes on this crtc [ 3.988396] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 3.988398] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 3.988398] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 3.988399] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 3.988400] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 3.999662] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 3.999665] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 3.999670] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 3.999672] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 3.999675] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 3.999675] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 3.999678] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 3.999683] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 3.999684] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 3.999686] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff880147307540 [ 3.999687] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 3.999688] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002d6f000 for pipe A [ 3.999689] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 3.999689] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 3.999691] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.999692] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 3.999693] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.999694] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.999694] [drm:intel_dump_pipe_config] requested mode: [ 3.999696] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.999697] [drm:intel_dump_pipe_config] adjusted mode: [ 3.999698] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 3.999700] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 3.999701] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.999701] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 3.999702] [drm:intel_dump_pipe_config] num_scalers: 0 [ 3.999703] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 3.999703] [drm:intel_dump_pipe_config] scaler id: 0 [ 3.999704] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.999705] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.999705] [drm:intel_dump_pipe_config] ips: 1 [ 3.999706] [drm:intel_dump_pipe_config] double wide: 0 [ 3.999706] [drm:intel_dump_pipe_config] planes on this crtc [ 3.999709] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 3.999710] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 3.999711] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 3.999712] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 3.999713] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 4.051879] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.052035] ACPI: AC Adapter [ADP1] (on-line) [ 4.082086] EXT4-fs (sda3): INFO: recovery required on readonly filesystem [ 4.082154] EXT4-fs (sda3): write access will be enabled during recovery [ 4.093764] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.093856] ACPI: Battery Slot [BAT0] (battery present) [ 4.093948] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.094029] ACPI: Battery Slot [BAT1] (battery absent) [ 4.094170] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.094247] ACPI: Battery Slot [BAT2] (battery absent) [ 4.100320] EXT4-fs (sda3): recovery complete [ 4.100584] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 4.107780] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 4.110512] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 4.114495] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258) [ 4.117678] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.120850] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 4.124313] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops update_polyphase_filter [i915]) [ 4.129793] [drm:intel_display_power_get] enabling display [ 4.129799] [drm:hsw_set_power_well] Enabling power well [ 4.132442] iTCO_vendor_support: vendor-support=0 [ 4.134687] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 4.134691] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 4.134695] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.134700] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 4.134702] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 4.134704] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 4.134708] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 4.134713] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 4.134714] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 4.134718] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8801473070c0 [ 4.134719] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 4.134721] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff8800024fb400 for pipe A [ 4.134722] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 4.134723] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 4.134724] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.134726] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 4.134728] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 4.134729] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 4.134730] [drm:intel_dump_pipe_config] requested mode: [ 4.134733] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.134734] [drm:intel_dump_pipe_config] adjusted mode: [ 4.134736] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.134739] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 4.134740] [drm:intel_dump_pipe_config] port clock: 270000 [ 4.134741] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 4.134742] [drm:intel_dump_pipe_config] num_scalers: 0 [ 4.134743] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 4.134744] [drm:intel_dump_pipe_config] scaler id: 0 [ 4.134745] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.134747] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.134748] [drm:intel_dump_pipe_config] ips: 1 [ 4.134749] [drm:intel_dump_pipe_config] double wide: 0 [ 4.134749] [drm:intel_dump_pipe_config] planes on this crtc [ 4.134753] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 4.134755] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 4.134756] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 4.134757] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 4.134759] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 4.134783] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.134814] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 4.136834] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.138114] ppdev: user-space parallel port driver [ 4.164061] dracut: Checking ext4: /dev/sda3 [ 4.166046] dracut: issuing e2fsck -a /dev/sda3 [ 4.176742] dracut: /dev/sda3: clean, 840387/4751360 files, 13675205/19000576 blocks [ 4.178953] dracut: Remounting /dev/sda3 with -o errors=remount-ro,ro [ 4.189044] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 4.194134] dracut: Mounted root filesystem /dev/sda3 [ 4.207696] device-mapper: uevent: version 1.0.3 [ 4.209679] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 4.242789] dracut: Switching root [ 4.281047] random: init urandom read with 102 bits of entropy available [ 4.305186] init: plymouth-upstart-bridge main process (2877) terminated with status 1 [ 4.307445] init: plymouth-upstart-bridge main process ended, respawning [ 4.314565] init: plymouth-upstart-bridge main process (2887) terminated with status 1 [ 4.316483] init: plymouth-upstart-bridge main process ended, respawning [ 4.322640] init: plymouth-upstart-bridge main process (2895) terminated with status 1 [ 4.324895] init: plymouth-upstart-bridge main process ended, respawning [ 4.421822] random: nonblocking pool is initialized [ 4.468740] systemd-udevd[3007]: starting version 204 [ 4.565539] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 4.565544] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 4.565549] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.565554] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 4.565557] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 4.565558] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 4.565562] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 4.565568] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 4.565569] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 4.565572] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8800a5e9d600 [ 4.565573] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 4.565575] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002dcf800 for pipe A [ 4.565576] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 4.565577] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 4.565579] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.565581] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 4.565583] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 4.565584] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 4.565585] [drm:intel_dump_pipe_config] requested mode: [ 4.565588] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.565589] [drm:intel_dump_pipe_config] adjusted mode: [ 4.565591] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.565594] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 4.565595] [drm:intel_dump_pipe_config] port clock: 270000 [ 4.565596] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 4.565597] [drm:intel_dump_pipe_config] num_scalers: 0 [ 4.565598] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 4.565599] [drm:intel_dump_pipe_config] scaler id: 0 [ 4.565600] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.565602] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.565603] [drm:intel_dump_pipe_config] ips: 1 [ 4.565604] [drm:intel_dump_pipe_config] double wide: 0 [ 4.565604] [drm:intel_dump_pipe_config] planes on this crtc [ 4.565608] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 4.565611] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 4.565611] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 4.565613] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 4.565615] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 4.615827] [drm:i915_gem_open] [ 4.615904] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 4.615910] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 4.615914] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.615920] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 4.615923] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 4.615925] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 4.615931] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 4.615938] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 4.615941] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 4.615945] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8800a7d37f60 [ 4.615947] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 4.615950] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880148ae2000 for pipe A [ 4.615952] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 4.615954] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 4.615957] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.615960] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 4.615963] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 4.615965] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 4.615967] [drm:intel_dump_pipe_config] requested mode: [ 4.615971] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.615973] [drm:intel_dump_pipe_config] adjusted mode: [ 4.615977] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.615981] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 4.615983] [drm:intel_dump_pipe_config] port clock: 270000 [ 4.615985] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 4.615987] [drm:intel_dump_pipe_config] num_scalers: 0 [ 4.615989] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 4.615991] [drm:intel_dump_pipe_config] scaler id: 0 [ 4.615993] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.615996] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.615998] [drm:intel_dump_pipe_config] ips: 1 [ 4.615999] [drm:intel_dump_pipe_config] double wide: 0 [ 4.616001] [drm:intel_dump_pipe_config] planes on this crtc [ 4.616004] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 4.616007] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258<7>[ 4.616010] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 4.616013] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 4.616016] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 4.616020] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 4.616023] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 4.616027] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.616031] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 4.616034] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 4.616037] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 4.616040] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.616044] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 4.616056] [drm:i915_gem_open] [ 4.616104] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 4.616107] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 4.616110] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.616114] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 4.616117] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 4.616119] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 4.616122] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 4.616128] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 4.616130] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 4.616133] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8800a7d37f60 [ 4.616135] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 4.616137] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880148ae2000 for pipe A [ 4.616139] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 4.616141] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 4.616143] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.616146] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 4.616148] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 4.616150] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 4.616152] [drm:intel_dump_pipe_config] requested mode: [ 4.616155] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.616157] [drm:intel_dump_pipe_config] adjusted mode: [ 4.616160] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.616164] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 4.616166] [drm:intel_dump_pipe_config] port clock: 270000 [ 4.616168] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 4.616169] [drm:intel_dump_pipe_config] num_scalers: 0 [ 4.616171] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 4.616173] [drm:intel_dump_pipe_config] scaler id: 0 [ 4.616175] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.616177] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.616179] [drm:intel_dump_pipe_config] ips: 1 [ 4.616181] [drm:intel_dump_pipe_config] double wide: 0 [ 4.616182] [drm:intel_dump_pipe_config] planes on this crtc [ 4.616185] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 4.616188] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258<7>[ 4.616191] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 4.616194] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 4.616196] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 4.616200] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 4.616202] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 4.616206] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.616210] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 4.616213] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 4.616215] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 4.616218] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 4.616222] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 4.616233] [drm:i915_gem_open] [ 4.616281] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 4.616285] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 4.616292] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 4.616295] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] [ 4.616298] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1] [ 4.616310] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 4.616315] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes : [ 4.616319] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 4.616323] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 4.616327] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 4.623930] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 4.623936] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 4.623938] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 4.623946] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 4.623950] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 4.623953] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 4.623954] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 4.623959] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 4.623964] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 4.623966] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 4.623968] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 4.628109] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 4.628115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 4.628119] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 4.628127] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 4.628130] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 4.628132] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 4.628298] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 4.628301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 4.628304] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 4.628313] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 4.628315] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 4.628318] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 4.628478] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 4.628481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 4.628484] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 4.628490] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 4.628492] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 4.628494] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 4.628654] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 4.628656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 4.628659] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 4.628689] [drm:drm_mode_addfb2] [FB:49] [ 4.632142] e1000e 0000:00:19.0 eth5: renamed from eth0 [ 4.647753] systemd-udevd[3100]: renamed network interface eth0 to eth5 [ 4.665235] asix 1-2.4:1.0 eth6: renamed from eth1 [ 4.666527] systemd-udevd[3094]: could not open moddep file '/lib/modules/4.0.0_drm-intel-nightly_d60065_20150417+/modules.dep.bin' [ 4.678987] systemd-udevd[3088]: renamed network interface eth1 to eth6 [ 4.730753] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k SS [ 4.747362] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 4.911416] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 4.992613] init: statd-mounting (/lib/modules/4.0.0-rc6_drm-intel-nightly_333cf6_20150403+) main process (3839) killed by TERM signal [ 5.046971] init: idmapd-mounting (/lib/modules/4.0.0-rc6_drm-intel-nightly_333cf6_20150403+) main process (3838) killed by TERM signal [ 5.047823] init: failsafe main process (4017) killed by TERM signal [ 5.104261] init: bluetooth main process (4097) terminated with status 1 [ 5.104273] init: bluetooth main process ended, respawning [ 5.195133] asix 1-2.4:1.0 eth6: link down [ 5.247030] init: bluetooth main process (4195) terminated with status 1 [ 5.247051] init: bluetooth main process ended, respawning [ 5.540588] init: bluetooth main process (4343) terminated with status 1 [ 5.540600] init: bluetooth main process ended, respawning [ 5.608709] init: bluetooth main process (4436) terminated with status 1 [ 5.608722] init: bluetooth main process ended, respawning [ 5.641240] init: bluetooth main process (4477) terminated with status 1 [ 5.641254] init: bluetooth main process ended, respawning [ 5.697101] init: bluetooth main process (4530) terminated with status 1 [ 5.697115] init: bluetooth main process ended, respawning [ 5.697565] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 5.697571] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 5.697576] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 5.697581] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 5.697585] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 5.697587] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 5.697592] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 5.697599] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 5.697601] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 5.697605] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff880002eb5ae0 [ 5.697608] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 5.697611] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff8800a5c46000 for pipe A [ 5.697612] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 5.697614] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 5.697617] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.697620] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 5.697623] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.697625] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.697627] [drm:intel_dump_pipe_config] requested mode: [ 5.697631] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.697633] [drm:intel_dump_pipe_config] adjusted mode: [ 5.697637] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.697640] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 5.697642] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.697644] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 5.697646] [drm:intel_dump_pipe_config] num_scalers: 0 [ 5.697648] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 5.697650] [drm:intel_dump_pipe_config] scaler id: 0 [ 5.697652] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.697654] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.697656] [drm:intel_dump_pipe_config] ips: 1 [ 5.697658] [drm:intel_dump_pipe_config] double wide: 0 [ 5.697660] [drm:intel_dump_pipe_config] planes on this crtc [ 5.697662] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 5.697665] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258<7>[ 5.697668] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 5.697671] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 5.697674] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5.697678] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 5.697681] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 5.697684] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 5.697687] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 5.697691] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 5.697693] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 5.697696] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 5.697700] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 5.697736] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 5.697738] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 5.697740] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 5.697743] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 5.697745] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 5.697746] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 5.697748] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 5.697753] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 5.697754] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 5.697756] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff880002eb5ae0 [ 5.697757] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 5.697759] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff8800a5c46000 for pipe A [ 5.697760] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 5.697761] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 5.697762] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.697764] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 5.697766] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.697767] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.697768] [drm:intel_dump_pipe_config] requested mode: [ 5.697770] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.697771] [drm:intel_dump_pipe_config] adjusted mode: [ 5.697773] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 5.697776] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 5.697776] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.697778] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 5.697778] [drm:intel_dump_pipe_config] num_scalers: 0 [ 5.697779] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 5.697780] [drm:intel_dump_pipe_config] scaler id: 0 [ 5.697782] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.697783] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.697784] [drm:intel_dump_pipe_config] ips: 1 [ 5.697785] [drm:intel_dump_pipe_config] double wide: 0 [ 5.697785] [drm:intel_dump_pipe_config] planes on this crtc [ 5.697788] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 5.697791] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 5.697791] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 5.697792] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 5.697794] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5.706339] init: plymouth-upstart-bridge main process ended, respawning [ 5.730000] init: bluetooth main process (4559) terminated with status 1 [ 5.730012] init: bluetooth main process ended, respawning [ 5.746734] init: bluetooth main process (4583) terminated with status 1 [ 5.746743] init: bluetooth main process ended, respawning [ 5.764534] init: bluetooth main process (4607) terminated with status 1 [ 5.764547] init: bluetooth main process ended, respawning [ 5.780076] init: bluetooth main process (4631) terminated with status 1 [ 5.780089] init: bluetooth main process ended, respawning [ 5.797531] init: bluetooth main process (4655) terminated with status 1 [ 5.797540] init: bluetooth respawning too fast, stopped [ 6.461682] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 6.461692] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 7.015625] asix 1-2.4:1.0 eth6: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 47.913264] pm_rpm: executing [ 47.913331] [drm:i915_gem_open] [ 47.913772] [drm:i915_gem_open] [ 47.913788] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 47.913795] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[6] [ 47.913801] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 47.913804] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] [ 47.913806] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1] [ 47.913815] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 47.913818] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes : [ 47.913821] [drm:drm_mode_debug_printmodeline] Modeline 32:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 47.913824] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 40 92520 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0xa [ 47.913826] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 47.913847] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 47.913849] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 47.913850] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 47.913855] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 47.913857] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 47.913867] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 47.913869] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 47.913871] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 47.914025] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 47.914029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 47.914031] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 47.914036] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 47.914050] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 47.914052] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] [ 47.914053] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2] [ 47.914212] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [ 47.914213] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 47.914215] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:HDMI-A-2] disconnected [ 47.914217] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 47.914263] [drm:drm_mode_addfb2] [FB:49] [ 47.946052] [drm:intel_display_power_put] disabling display [ 47.946057] [drm:hsw_set_power_well] Requesting to disable the power well [ 47.958981] pm_rpm: starting subtest debugfs-read [ 47.959026] [drm:drm_mode_setcrtc] [CRTC:20] [ 47.959029] [drm:intel_crtc_set_config] [CRTC:20] [NOFB] [ 47.959032] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=0 [ 47.959034] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [NOCRTC] [ 47.959036] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] encoder changed, full mode switch [ 47.959037] [drm:intel_modeset_stage_output_state] [ENCODER:30:TMDS-30] crtc changed, full mode switch [ 47.959042] [drm:intel_modeset_stage_output_state] [CRTC:20] disabled, full mode switch [ 47.959044] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [ 47.963981] [drm:intel_edp_backlight_off] [ 48.164539] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 48.180697] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 48.180704] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 48.180851] [drm:edp_panel_off] Turn eDP port A panel power off [ 48.180855] [drm:wait_panel_off] Wait for panel power off time [ 48.180858] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 48.240892] [drm:wait_panel_status] Wait complete [ 48.240907] [drm:intel_display_power_put] disabling always-on [ 48.240913] [drm:intel_runtime_suspend] Suspending device [ 48.240969] [drm:hsw_enable_pc8] Enabling package C8+ [ 48.240978] [drm:check_encoder_state] [ENCODER:30:TMDS-30] [ 48.240980] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 48.240982] [drm:check_encoder_state] [ENCODER:41:DP MST-41] [ 48.240983] [drm:check_encoder_state] [ENCODER:42:DP MST-42] [ 48.240984] [drm:check_encoder_state] [ENCODER:43:DP MST-43] [ 48.240985] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 48.240987] [drm:check_crtc_state] [CRTC:20] [ 48.240988] [drm:check_crtc_state] [CRTC:24] [ 48.240990] [drm:check_crtc_state] [CRTC:28] [ 48.240991] [drm:check_shared_dpll_state] WRPLL 1 [ 48.240992] [drm:check_shared_dpll_state] WRPLL 2 [ 48.241001] [drm:drm_mode_setcrtc] [CRTC:24] [ 48.241002] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 48.241005] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 48.241009] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 48.241013] [drm:drm_mode_setcrtc] [CRTC:28] [ 48.241014] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 48.241016] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 48.241018] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 48.249073] [drm:intel_runtime_suspend] Device suspended [ 48.351457] [drm:intel_runtime_resume] Resuming device [ 48.353478] [drm:hsw_disable_pc8] Disabling package C8+ [ 48.387895] [drm:intel_runtime_resume] Device resumed [ 48.387897] [drm:intel_display_power_get] enabling always-on [ 48.390439] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.390442] [drm:intel_display_power_put] disabling always-on [ 48.390458] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (15 bytes at 0) failed (-110) [ 48.390460] [drm:intel_display_power_get] enabling always-on [ 48.392977] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.392979] [drm:intel_display_power_put] disabling always-on [ 48.392991] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (2 bytes at 112) failed (-110) [ 48.392992] [drm:intel_display_power_get] enabling always-on [ 48.395509] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.395511] [drm:intel_display_power_put] disabling always-on [ 48.395522] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (16 bytes at 128) failed (-110) [ 48.395524] [drm:intel_display_power_get] enabling always-on [ 48.398041] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.398043] [drm:intel_display_power_put] disabling always-on [ 48.398053] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (11 bytes at 256) failed (-110) [ 48.398055] [drm:intel_display_power_get] enabling always-on [ 48.400571] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.400573] [drm:intel_display_power_put] disabling always-on [ 48.400584] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (8 bytes at 512) failed (-110) [ 48.400585] [drm:intel_display_power_get] enabling always-on [ 48.403101] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.403103] [drm:intel_display_power_put] disabling always-on [ 48.403114] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (1 bytes at 1536) failed (-110) [ 48.403116] [drm:intel_display_power_get] enabling always-on [ 48.405632] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.405634] [drm:intel_display_power_put] disabling always-on [ 48.405644] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (1 bytes at 1792) failed (-110) [ 48.405646] [drm:intel_display_power_get] enabling always-on [ 48.408162] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.408164] [drm:intel_display_power_put] disabling always-on [ 48.408174] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (4 bytes at 1793) failed (-110) [ 48.408176] [drm:intel_display_power_get] enabling always-on [ 48.410692] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.410694] [drm:intel_display_power_put] disabling always-on [ 48.410704] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (16 bytes at 1824) failed (-110) [ 48.410706] [drm:intel_display_power_get] enabling always-on [ 48.413236] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145000c [ 48.413239] [drm:intel_display_power_put] disabling always-on [ 48.413249] [drm:i915_dpcd_show [i915]] *ERROR* dpcd read (2 bytes at 1842) failed (-110) [ 49.715832] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 49.742099] [drm:intel_runtime_suspend] Suspending device [ 49.742154] [drm:hsw_enable_pc8] Enabling package C8+ [ 49.750255] [drm:intel_runtime_suspend] Device suspended [ 49.823639] [drm:intel_runtime_resume] Resuming device [ 49.825660] [drm:hsw_disable_pc8] Disabling package C8+ [ 49.860073] [drm:intel_runtime_resume] Device resumed [ 49.860074] [drm:intel_display_power_get] enabling always-on [ 49.860079] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 49.860081] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 49.860084] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 49.860086] [drm:wait_panel_status] Wait complete [ 49.860092] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 49.860094] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled [ 51.714745] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 53.067822] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 53.067828] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0000 [ 53.067829] [drm:intel_display_power_put] disabling always-on [ 53.067831] [drm:intel_runtime_suspend] Suspending device [ 53.067885] [drm:hsw_enable_pc8] Enabling package C8+ [ 53.075986] [drm:intel_runtime_suspend] Device suspended [ 53.173780] [drm:intel_runtime_resume] Resuming device [ 53.175801] [drm:hsw_disable_pc8] Disabling package C8+ [ 53.210215] [drm:intel_runtime_resume] Device resumed [ 54.712958] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 54.739212] [drm:intel_runtime_suspend] Suspending device [ 54.739266] [drm:hsw_enable_pc8] Enabling package C8+ [ 54.747365] [drm:intel_runtime_suspend] Device suspended [ 54.820866] [drm:intel_runtime_resume] Resuming device [ 54.822887] [drm:hsw_disable_pc8] Disabling package C8+ [ 54.857299] [drm:intel_runtime_resume] Device resumed [ 56.711854] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 56.738105] [drm:intel_runtime_suspend] Suspending device [ 56.738159] [drm:hsw_enable_pc8] Enabling package C8+ [ 56.746258] [drm:intel_runtime_suspend] Device suspended [ 56.767786] [drm:intel_runtime_resume] Resuming device [ 56.769806] [drm:hsw_disable_pc8] Disabling package C8+ [ 56.804224] [drm:intel_runtime_resume] Device resumed [ 58.710742] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 58.736994] [drm:intel_runtime_suspend] Suspending device [ 58.737048] [drm:hsw_enable_pc8] Enabling package C8+ [ 58.745147] [drm:intel_runtime_suspend] Device suspended [ 58.814650] [drm:intel_runtime_resume] Resuming device [ 58.816670] [drm:hsw_disable_pc8] Disabling package C8+ [ 58.851083] [drm:intel_runtime_resume] Device resumed [ 60.709632] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 60.735882] [drm:intel_runtime_suspend] Suspending device [ 60.735936] [drm:hsw_enable_pc8] Enabling package C8+ [ 60.744034] [drm:intel_runtime_suspend] Device suspended [ 60.861514] [drm:intel_runtime_resume] Resuming device [ 60.863535] [drm:hsw_disable_pc8] Disabling package C8+ [ 60.897950] [drm:intel_runtime_resume] Device resumed [ 62.708527] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 62.734616] [drm:intel_runtime_suspend] Suspending device [ 62.734669] [drm:hsw_enable_pc8] Enabling package C8+ [ 62.742767] [drm:intel_runtime_suspend] Device suspended [ 62.808434] [drm:intel_runtime_resume] Resuming device [ 62.810455] [drm:hsw_disable_pc8] Disabling package C8+ [ 62.844870] [drm:intel_runtime_resume] Device resumed [ 64.707416] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 64.733667] [drm:intel_runtime_suspend] Suspending device [ 64.733720] [drm:hsw_enable_pc8] Enabling package C8+ [ 64.741820] [drm:intel_runtime_suspend] Device suspended [ 64.855298] [drm:intel_runtime_resume] Resuming device [ 64.857319] [drm:hsw_disable_pc8] Disabling package C8+ [ 64.891733] [drm:intel_runtime_resume] Device resumed [ 65.399630] usb 1-6: USB disconnect, device number 3 [ 66.706310] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 66.732549] [drm:intel_runtime_suspend] Suspending device [ 66.732606] [drm:hsw_enable_pc8] Enabling package C8+ [ 66.740708] [drm:intel_runtime_suspend] Device suspended [ 66.803220] [drm:intel_runtime_resume] Resuming device [ 66.805242] [drm:hsw_disable_pc8] Disabling package C8+ [ 66.837613] [drm:intel_runtime_resume] Device resumed [ 66.913143] usb 1-6: new low-speed USB device number 5 using xhci_hcd [ 67.080328] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 67.080331] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 67.080333] usb 1-6: Product: USB Optical Mouse [ 67.080334] usb 1-6: Manufacturer: Logitech [ 67.080414] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 67.082302] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0002/input/input8 [ 67.133087] hid-generic 0003:046D:C06A.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0 [ 68.705201] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 68.731458] [drm:intel_runtime_suspend] Suspending device [ 68.731515] [drm:hsw_enable_pc8] Enabling package C8+ [ 68.739618] [drm:intel_runtime_suspend] Device suspended [ 68.849085] [drm:intel_runtime_resume] Resuming device [ 68.851107] [drm:hsw_disable_pc8] Disabling package C8+ [ 68.885493] [drm:intel_runtime_resume] Device resumed [ 70.704093] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 70.730333] [drm:intel_runtime_suspend] Suspending device [ 70.730389] [drm:hsw_enable_pc8] Enabling package C8+ [ 70.738001] [drm:intel_runtime_suspend] Device suspended [ 70.796010] [drm:intel_runtime_resume] Resuming device [ 70.798034] [drm:hsw_disable_pc8] Disabling package C8+ [ 70.832460] [drm:intel_runtime_resume] Device resumed [ 72.702980] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 72.729072] [drm:intel_runtime_suspend] Suspending device [ 72.729128] [drm:hsw_enable_pc8] Enabling package C8+ [ 72.736787] [drm:intel_runtime_suspend] Device suspended [ 72.842868] [drm:intel_runtime_resume] Resuming device [ 72.844889] [drm:hsw_disable_pc8] Disabling package C8+ [ 72.879302] [drm:intel_runtime_resume] Device resumed [ 74.701873] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 74.728125] [drm:intel_runtime_suspend] Suspending device [ 74.728179] [drm:hsw_enable_pc8] Enabling package C8+ [ 74.736278] [drm:intel_runtime_suspend] Device suspended [ 74.789787] [drm:intel_runtime_resume] Resuming device [ 74.791807] [drm:hsw_disable_pc8] Disabling package C8+ [ 74.826219] [drm:intel_runtime_resume] Device resumed [ 76.700764] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 76.726531] [drm:intel_runtime_suspend] Suspending device [ 76.726585] [drm:hsw_enable_pc8] Enabling package C8+ [ 76.734684] [drm:intel_runtime_suspend] Device suspended [ 76.837651] [drm:intel_runtime_resume] Resuming device [ 76.839672] [drm:hsw_disable_pc8] Disabling package C8+ [ 76.874084] [drm:intel_runtime_resume] Device resumed [ 76.876142] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 76.902446] [drm:intel_runtime_suspend] Suspending device [ 76.902476] [drm:hsw_enable_pc8] Enabling package C8+ [ 76.909646] [drm:intel_runtime_suspend] Device suspended [ 77.013556] [drm:intel_runtime_resume] Resuming device [ 77.015560] [drm:hsw_disable_pc8] Disabling package C8+ [ 77.049925] [drm:intel_runtime_resume] Device resumed [ 78.695639] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 78.721890] [drm:intel_runtime_suspend] Suspending device [ 78.721944] [drm:hsw_enable_pc8] Enabling package C8+ [ 78.730043] [drm:intel_runtime_suspend] Device suspended [ 78.760584] [drm:intel_runtime_resume] Resuming device [ 78.762605] [drm:hsw_disable_pc8] Disabling package C8+ [ 78.797018] [drm:intel_runtime_resume] Device resumed [ 80.694546] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 80.720797] [drm:intel_runtime_suspend] Suspending device [ 80.720852] [drm:hsw_enable_pc8] Enabling package C8+ [ 80.728951] [drm:intel_runtime_suspend] Device suspended [ 80.808449] [drm:intel_runtime_resume] Resuming device [ 80.810469] [drm:hsw_disable_pc8] Disabling package C8+ [ 80.844881] [drm:intel_runtime_resume] Device resumed [ 82.693419] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 82.719487] [drm:intel_runtime_suspend] Suspending device [ 82.719541] [drm:hsw_enable_pc8] Enabling package C8+ [ 82.727641] [drm:intel_runtime_suspend] Device suspended [ 82.755369] [drm:intel_runtime_resume] Resuming device [ 82.757390] [drm:hsw_disable_pc8] Disabling package C8+ [ 82.791805] [drm:intel_runtime_resume] Device resumed [ 82.792557] pm_rpm: exiting, ret=0 [ 82.792614] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 82.792615] [drm:intel_set_config_compute_mode_changes] inactive crtc, full mode set [ 82.792617] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=0 [ 82.792618] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] encoder changed, full mode switch [ 82.792620] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 82.792621] [drm:intel_modeset_stage_output_state] [ENCODER:30:TMDS-30] crtc changed, full mode switch [ 82.792623] [drm:intel_modeset_stage_output_state] [CRTC:20] enabled, full mode switch [ 82.792625] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 82.792627] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 82.792628] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 82.792631] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 82.792635] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 82.792636] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 82.792638] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff880002eb5240 [ 82.792639] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 82.792640] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff8800a5c42400 for pipe A [ 82.792641] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 82.792641] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 82.792643] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 82.792644] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 82.792645] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 82.792646] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 82.792647] [drm:intel_dump_pipe_config] requested mode: [ 82.792649] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 82.792649] [drm:intel_dump_pipe_config] adjusted mode: [ 82.792651] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 82.792653] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 82.792653] [drm:intel_dump_pipe_config] port clock: 270000 [ 82.792654] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 82.792654] [drm:intel_dump_pipe_config] num_scalers: 0 [ 82.792655] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 82.792656] [drm:intel_dump_pipe_config] scaler id: 0 [ 82.792657] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 82.792657] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 82.792658] [drm:intel_dump_pipe_config] ips: 1 [ 82.792659] [drm:intel_dump_pipe_config] double wide: 0 [ 82.792659] [drm:intel_dump_pipe_config] planes on this crtc [ 82.792660] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 82.792661] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 82.792662] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 82.792667] [drm:intel_display_power_get] enabling always-on [ 82.792685] [drm:edp_panel_on] Turn eDP port A panel power on [ 82.792688] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 82.792691] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 82.792692] [drm:wait_panel_status] Wait complete [ 82.792695] [drm:wait_panel_on] Wait for panel power on [ 82.792697] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 82.992799] [drm:wait_panel_status] Wait complete [ 82.992802] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 82.992808] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 82.993857] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 82.993858] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 82.993859] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 82.994438] [drm:intel_dp_start_link_train] clock recovery OK [ 82.995318] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 82.995543] [drm:intel_edp_backlight_on] [ 82.995544] [drm:intel_panel_enable_backlight] pipe A [ 82.995551] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 82.995556] [drm:intel_psr_enable] PSR not supported by this panel [ 82.995557] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 83.028843] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1] [ 83.028845] [drm:check_encoder_state] [ENCODER:30:TMDS-30] [ 83.028846] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 83.028847] [drm:check_encoder_state] [ENCODER:41:DP MST-41] [ 83.028848] [drm:check_encoder_state] [ENCODER:42:DP MST-42] [ 83.028849] [drm:check_encoder_state] [ENCODER:43:DP MST-43] [ 83.028849] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 83.028850] [drm:check_crtc_state] [CRTC:20] [ 83.028856] [drm:check_crtc_state] [CRTC:24] [ 83.028857] [drm:check_crtc_state] [CRTC:28] [ 83.028858] [drm:check_shared_dpll_state] WRPLL 1 [ 83.028859] [drm:check_shared_dpll_state] WRPLL 2 [ 83.028862] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 83.028864] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 83.028867] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 83.028869] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 83.028871] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 83.028872] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 83.028874] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 83.028875] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 83.028881] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 83.028882] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 83.028884] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 83.028885] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 83.028887] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 83.028888] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 83.028890] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 83.028894] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 83.028895] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 83.028896] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8801490cea80 [ 83.028897] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 83.028898] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880144172000 for pipe A [ 83.028899] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 83.028900] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 83.028901] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 83.028902] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 83.028903] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 83.028904] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 83.028905] [drm:intel_dump_pipe_config] requested mode: [ 83.028907] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 83.028907] [drm:intel_dump_pipe_config] adjusted mode: [ 83.028909] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 83.028910] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 83.028911] [drm:intel_dump_pipe_config] port clock: 270000 [ 83.028912] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 83.028912] [drm:intel_dump_pipe_config] num_scalers: 0 [ 83.028913] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 83.028913] [drm:intel_dump_pipe_config] scaler id: 0 [ 83.028914] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 83.028915] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 83.028916] [drm:intel_dump_pipe_config] ips: 1 [ 83.028916] [drm:intel_dump_pipe_config] double wide: 0 [ 83.028917] [drm:intel_dump_pipe_config] planes on this crtc [ 83.028919] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 83.028921] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 83.028921] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0 [ 83.028922] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 83.028923] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 83.028932] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 83.028934] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 83.028935] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 83.028937] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 83.028938] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 83.028938] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 83.028940] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 83.028943] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 83.028943] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 83.028945] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8801490cea80 [ 83.028946] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 83.028946] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880144172000 for pipe A [ 83.028947] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 83.028947] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 83.028949] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 83.028950] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 83.028951] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 83.028952] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 83.028952] [drm:intel_dump_pipe_config] requested mode: [ 83.028954] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 83.028954] [drm:intel_dump_pipe_config] adjusted mode: [ 83.028956] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 83.028957] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 83.028958] [drm:intel_dump_pipe_config] port clock: 270000 [ 83.028959] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 83.028959] [drm:intel_dump_pipe_config] num_scalers: 0 [ 83.028960] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 83.028960] [drm:intel_dump_pipe_config] scaler id: 0 [ 83.028961] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 83.028962] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 83.028962] [drm:intel_dump_pipe_config] ips: 1 [ 83.028963] [drm:intel_dump_pipe_config] double wide: 0 [ 83.028963] [drm:intel_dump_pipe_config] planes on this crtc [ 83.028965] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 83.028967] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258 [ 83.028967] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0 [ 83.028968] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 83.028969] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 83.034856] [drm:intel_crtc_set_config] [CRTC:20] [FB:50] #connectors=1 (x y) (0 0) [ 83.034859] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 83.034862] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 83.034865] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 83.034866] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains [ 83.034868] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 83.034870] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz [ 83.034874] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 24 [ 83.034876] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000 [ 83.034878] [drm:intel_crtc_compute_config] intel_crtc = ffff880149580000 drm_state (pipe_config->base.state) = ffff8801490cea80 [ 83.034879] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1 [ 83.034881] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880144172c00 for pipe A [ 83.034882] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 83.034883] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1 [ 83.034885] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 83.034887] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64 [ 83.034889] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 83.034890] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 83.034891] [drm:intel_dump_pipe_config] requested mode: [ 83.034894] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 83.034895] [drm:intel_dump_pipe_config] adjusted mode: [ 83.034897] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0xa [ 83.034899] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0xa [ 83.034900] [drm:intel_dump_pipe_config] port clock: 270000 [ 83.034901] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 83.034902] [drm:intel_dump_pipe_config] num_scalers: 0 [ 83.034903] [drm:intel_dump_pipe_config] scaler_users: 0x0 [ 83.034905] [drm:intel_dump_pipe_config] scaler id: 0 [ 83.034906] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 83.034908] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 83.034909] [drm:intel_dump_pipe_config] ips: 1 [ 83.034910] [drm:intel_dump_pipe_config] double wide: 0 [ 83.034911] [drm:intel_dump_pipe_config] planes on this crtc [ 83.034913] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled [ 83.034914] [drm:intel_dump_pipe_config] FB:50, fb = 1920x1080 format = 0x34325258<7>[ 83.034917] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 83.034918] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 83.034920] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 83.034922] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 83.034924] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 83.034926] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 83.034928] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 83.034930] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 83.034931] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 83.034933] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20] [ 83.034935] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 84.692314] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 86.001552] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 86.001559] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 127.165286] usb 1-6: USB disconnect, device number 5 [ 128.678877] usb 1-6: new low-speed USB device number 6 using xhci_hcd [ 128.846202] usb 1-6: New USB device found, idVendor=046d, idProduct=c06a [ 128.846205] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 128.846207] usb 1-6: Product: USB Optical Mouse [ 128.846208] usb 1-6: Manufacturer: Logitech [ 128.846288] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 128.848294] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C06A.0003/input/input9 [ 128.898801] hid-generic 0003:046D:C06A.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0