[    4.183309] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0001/input/input3
[    4.183447] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[    4.256463] usb 3-1.2: new low-speed USB device number 4 using ehci-pci
[    4.341732] dracut: dracut-018-35.git20120510.fc17
[    4.348570] usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[    4.348572] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.348573] usb 3-1.2: Product: USB Keyboard
[    4.348574] usb 3-1.2: Manufacturer: SIGMACHIP
[    4.351753] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0002.0002/input/input4
[    4.402692] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.2/input0
[    4.405599] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.1/0003:1C4F:0002.0003/input/input5
[    4.456733] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.2/input1
[    4.529773] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[    4.619628] usb 3-1.6: New USB device found, idVendor=07a6, idProduct=8515
[    4.649911] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.649913] usb 3-1.6: Product: USB To LAN Converter
[    4.649914] usb 3-1.6: Manufacturer: ADMtek
[    4.649915] usb 3-1.6: SerialNumber: 0001
[    4.770416] udevd[1292]: starting version 182
[    4.771621] pegasus 3-1.6:1.0: setup Pegasus II specific registers
[    4.841136] [drm] Initialized drm 1.1.0 20060810
[    4.871801] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    4.875114] pegasus 3-1.6:1.0: eth1, ADMtek ADM8515 "Pegasus II" USB-2.0 Ethernet, 00:00:e8:00:05:c8
[    4.933680] ACPI: Power Button [PWRB]
[    4.933728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    4.933763] ACPI: Power Button [PWRF]
[    4.936351] [drm:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 rev=0x09 flags=need_gfx_hws,has_fbc,has_hotplug,has_llc,
[    4.936351] [drm:intel_detect_pch] Found CougarPoint PCH
[    4.936615] [drm] Memory usable by graphics device = 2048M
[    4.936615] [drm:i915_gem_gtt_init] GMADR size = 256M
[    4.936616] [drm:i915_gem_gtt_init] GTT stolen size = 32M
[    4.936617] [drm:i915_gem_gtt_init] ppgtt mode: 1
[    4.936618] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[    4.936619] fb: switching to inteldrmfb from VESA VGA
[    5.188911] Console: switching to colour dummy device 80x25
[    5.189063] [drm] Replacing VGA console driver
[    5.189566] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbcbd6018
[    5.189575] [drm:intel_opregion_setup] Public ACPI methods supported
[    5.189576] [drm:intel_opregion_setup] SWSCI supported
[    5.195431] [drm:swsci_setup] SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (00000041)
[    5.195435] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
[    5.195437] [drm:intel_opregion_setup] ASLE supported
[    5.195524] [drm:intel_device_info_runtime_init] slice total: 0
[    5.195525] [drm:intel_device_info_runtime_init] subslice total: 0
[    5.195527] [drm:intel_device_info_runtime_init] subslice per slice: 0
[    5.195528] [drm:intel_device_info_runtime_init] EU total: 0
[    5.195529] [drm:intel_device_info_runtime_init] EU per subslice: 0
[    5.195530] [drm:intel_device_info_runtime_init] has slice power gating: n
[    5.195532] [drm:intel_device_info_runtime_init] has subslice power gating: n
[    5.195533] [drm:intel_device_info_runtime_init] has EU power gating: n
[    5.195534] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.195539] [drm] Driver supports precise vblank timestamp query.
[    5.195543] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
[    5.195545] [drm:validate_vbt] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
[    5.195547] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[    5.195549] [drm:parse_general_definitions] crt_ddc_bus_pin: 5
[    5.195551] [drm:parse_lfp_panel_data] DRRS supported mode is static
[    5.195553] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[    5.195556] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[    5.195558] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
[    5.195560] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
[    5.195562] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[    5.195564] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    5.195566] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[    5.195568] [drm:parse_driver_features] DRRS State Enabled:1
[    5.195569] [drm:parse_psr] No PSR BDB found.
[    5.195576] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[    5.195580] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at bda00000
[    5.195582] [drm:intel_display_power_get] enabling always-on
[    5.195624] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
[    5.195625] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
[    5.195626] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
[    5.195628] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
[    5.195629] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
[    5.195631] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
[    5.195632] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
[    5.195634] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
[    5.195635] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
[    5.195637] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
[    5.195638] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
[    5.195639] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
[    5.195641] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns
[    5.195642] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
[    5.195644] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
[    5.195645] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
[    5.195647] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
[    5.195648] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
[    5.195650] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
[    5.195651] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
[    5.195652] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
[    5.195654] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
[    5.195655] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
[    5.195657] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
[    5.195658] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
[    5.195660] [drm:intel_modeset_init] 2 display pipes available.
[    5.195670] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.195983] [drm:intel_lvds_init] LVDS is not present in VBT
[    5.196028] [drm:intel_crt_reset] crt adpa set to 0xf40000
[    5.196032] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[    5.196506] [drm:intel_sdvo_read_byte] i2c transfer returned -6
[    5.196508] [drm:intel_sdvo_init] No SDVO device found on SDVOB
[    5.196616] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[    5.196687] [drm:intel_dp_init_connector] Adding DP connector on port B
[    5.196717] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
[    5.196905] [drm:intel_dp_init_connector] Adding DP connector on port C
[    5.196932] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
[    5.197028] [drm:intel_dp_init_connector] Adding DP connector on port D
[    5.197058] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-3
[    5.197108] [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[    5.197123] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: enabled
[    5.197125] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[    5.197131] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1
[    5.197136] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0
[    5.197140] [drm:intel_modeset_readout_hw_state] [ENCODER:27:DAC-27] hw state readout: disabled, pipe A
[    5.197143] [drm:intel_modeset_readout_hw_state] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A
[    5.197147] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: disabled, pipe A
[    5.197150] [drm:intel_modeset_readout_hw_state] [ENCODER:35:TMDS-35] hw state readout: disabled, pipe A
[    5.197155] [drm:intel_modeset_readout_hw_state] [ENCODER:37:TMDS-37] hw state readout: enabled, pipe A
[    5.197158] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[    5.197161] [drm:intel_modeset_readout_hw_state] [ENCODER:41:TMDS-41] hw state readout: disabled, pipe A
[    5.197164] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:VGA-1] hw state readout: disabled
[    5.197168] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:HDMI-A-1] hw state readout: disabled
[    5.197171] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:DP-1] hw state readout: disabled
[    5.197174] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:HDMI-A-2] hw state readout: disabled
[    5.197177] [drm:intel_modeset_readout_hw_state] [CONNECTOR:38:HDMI-A-3] hw state readout: enabled
[    5.197179] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-2] hw state readout: disabled
[    5.197182] [drm:intel_modeset_readout_hw_state] [CONNECTOR:42:DP-3] hw state readout: disabled
[    5.197186] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config ffff88022f84ec00 for pipe A
[    5.197187] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    5.197188] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    5.197191] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 2516582, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    5.197193] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.197195] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.197196] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.197197] [drm:intel_dump_pipe_config] requested mode:
[    5.197200] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1280 0 0 0 1024 0 0 0 0x0 0x0
[    5.197201] [drm:intel_dump_pipe_config] adjusted mode:
[    5.197203] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
[    5.197205] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
[    5.197206] [drm:intel_dump_pipe_config] port clock: 108000
[    5.197208] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    5.197209] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.197210] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.197211] [drm:intel_dump_pipe_config] scaler id: 0
[    5.197213] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.197214] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05000400, enabled
[    5.197216] [drm:intel_dump_pipe_config] ips: 0
[    5.197217] [drm:intel_dump_pipe_config] double wide: 0
[    5.197218] [drm:intel_dump_pipe_config] planes on this crtc
[    5.197220] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 disabled, scaler_id = -1
[    5.197222] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    5.197224] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    5.197226] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config ffff88022f84fc00 for pipe B
[    5.197227] [drm:intel_dump_pipe_config] cpu_transcoder: B
[    5.197228] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[    5.197230] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.197232] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.197234] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.197235] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.197236] [drm:intel_dump_pipe_config] requested mode:
[    5.197238] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    5.197239] [drm:intel_dump_pipe_config] adjusted mode:
[    5.197241] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    5.197243] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    5.197245] [drm:intel_dump_pipe_config] port clock: 0
[    5.197246] [drm:intel_dump_pipe_config] pipe src size: 0x0
[    5.197247] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.197248] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.197249] [drm:intel_dump_pipe_config] scaler id: 0
[    5.197251] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.197252] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.197254] [drm:intel_dump_pipe_config] ips: 0
[    5.197255] [drm:intel_dump_pipe_config] double wide: 0
[    5.197256] [drm:intel_dump_pipe_config] planes on this crtc
[    5.197257] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 1.0 idx: 3 disabled, scaler_id = -1
[    5.197259] [drm:intel_dump_pipe_config] CURSOR PLANE:23 plane: 1.2 idx: 4 disabled, scaler_id = -1
[    5.197261] [drm:intel_dump_pipe_config] STANDARD PLANE:25 plane: 1.1 idx: 5 disabled, scaler_id = 0
[    5.197270] [drm:intel_connector_check_state] [CONNECTOR:38:HDMI-A-3]
[    5.197275] [drm:check_encoder_state] [ENCODER:27:DAC-27]
[    5.197277] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
[    5.197280] [drm:check_encoder_state] [ENCODER:33:TMDS-33]
[    5.197283] [drm:check_encoder_state] [ENCODER:35:TMDS-35]
[    5.197286] [drm:check_encoder_state] [ENCODER:37:TMDS-37]
[    5.197288] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[    5.197291] [drm:check_encoder_state] [ENCODER:41:TMDS-41]
[    5.197294] [drm:check_crtc_state] [CRTC:20]
[    5.197308] [drm:check_crtc_state] [CRTC:24]
[    5.197309] [drm:check_shared_dpll_state] PCH DPLL A
[    5.197314] [drm:check_shared_dpll_state] PCH DPLL B
[    5.197322] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1280x1024@32, offset=0, pitch 5120, size 0x500000
[    5.197324] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=500000
[    5.197328] [drm:i915_pages_create_for_stolen] offset=0x0, size=5242880
[    5.197331] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88022f200000
[    5.197549] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 500000
[    5.197551] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [500000, 7ffff000]
[    5.198828] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
[    5.199943] [drm:i915_gem_object_create_stolen] creating stolen object: size=2000
[    5.199946] [drm:i915_pages_create_for_stolen] offset=0x500000, size=8192
[    5.199951] [drm:i915_gem_context_init] HW context support initialized
[    5.199961] [drm:init_status_page] render ring hws offset: 0x7fff2000
[    5.200004] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00520000
[    5.200009] [drm:init_status_page] bsd ring hws offset: 0x00521000
[    5.200044] [drm:init_status_page] blitter ring hws offset: 0x00542000
[    5.200136] [drm:gen6_check_mch_setup] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns.
[    5.200232] i915: No ACPI video bus found
[    5.200245] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1]
[    5.200248] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1
[    5.200252] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[    5.200262] [drm] Initialized i915 1.6.0 20150410 for 0000:00:02.0 on minor 0
[    5.209459] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[    5.209463] [drm:intel_crt_detect] CRT not detected via hotplug
[    5.209692] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    5.209705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    5.209706] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    5.209708] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[    5.210112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    5.210114] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[    5.210115] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    5.210118] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] status updated from 3 to 2
[    5.210121] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] disconnected
[    5.210123] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1]
[    5.210125] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1]
[    5.210299] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    5.210302] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    5.210305] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] status updated from 3 to 2
[    5.210309] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected
[    5.210319] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1]
[    5.210320] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[    5.210324] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] status updated from 3 to 2
[    5.210326] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected
[    5.210327] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2]
[    5.210328] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2]
[    5.210527] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    5.210539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    5.210542] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] status updated from 3 to 2
[    5.210544] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected
[    5.210546] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3]
[    5.210547] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3]
[    5.223370] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] status updated from 3 to 1
[    5.223392] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[    5.223396] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] probed modes :
[    5.223399] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.223401] [drm:drm_mode_debug_printmodeline] Modeline 46:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[    5.223404] [drm:drm_mode_debug_printmodeline] Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    5.223406] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    5.223408] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    5.223410] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    5.223412] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2]
[    5.223413] [drm:intel_dp_detect] [CONNECTOR:40:DP-2]
[    5.223417] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] status updated from 3 to 2
[    5.223419] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected
[    5.223420] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3]
[    5.223421] [drm:intel_dp_detect] [CONNECTOR:42:DP-3]
[    5.225896] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.228363] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.231913] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.235914] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.237489] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] status updated from 3 to 2
[    5.237494] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected
[    5.237499] [drm:drm_setup_crtcs] 
[    5.237502] [drm:drm_enable_connectors] connector 26 enabled? no
[    5.237511] [drm:drm_enable_connectors] connector 29 enabled? no
[    5.237513] [drm:drm_enable_connectors] connector 34 enabled? no
[    5.237514] [drm:drm_enable_connectors] connector 36 enabled? no
[    5.237515] [drm:drm_enable_connectors] connector 38 enabled? yes
[    5.237516] [drm:drm_enable_connectors] connector 40 enabled? no
[    5.237518] [drm:drm_enable_connectors] connector 42 enabled? no
[    5.237520] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[    5.237521] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[    5.237522] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[    5.237523] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
[    5.237525] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-3
[    5.237526] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-3 0
[    5.237528] [drm:intel_fb_initial_config] connector HDMI-A-3 on pipe A [CRTC:20]: 1280x1024
[    5.237530] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
[    5.237531] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
[    5.237533] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 20 (0,0)
[    5.237536] [drm:intelfb_create] no BIOS fb, allocating a new one
[    5.237538] [drm:i915_gem_object_create_stolen] creating stolen object: size=500000
[    5.237540] [drm:i915_pages_create_for_stolen] offset=0x502000, size=5242880
[    5.238226] [drm:intelfb_create] allocated 1280x1024 fb: 0x00563000, bo ffff88022f200fc0
[    5.238375] fbcon: inteldrmfb (fb0) is primary device
[    5.238427] [drm:intel_fbc_update] disabled per chip default
[    5.238440] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    5.238442] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[    5.238443] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    5.238445] [drm:drm_mode_debug_printmodeline] Modeline 51:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.238450] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=1
[    5.238453] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.238456] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.238458] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    5.238459] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    5.238460] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    5.238461] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    5.238462] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    5.238463] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    5.238464] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88022f5a2000 for pipe A
[    5.238465] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    5.238466] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    5.238467] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    5.238469] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.238470] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.238471] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.238471] [drm:intel_dump_pipe_config] requested mode:
[    5.238473] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.238474] [drm:intel_dump_pipe_config] adjusted mode:
[    5.238475] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.238477] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    5.238478] [drm:intel_dump_pipe_config] port clock: 108000
[    5.238478] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    5.238479] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.238480] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.238480] [drm:intel_dump_pipe_config] scaler id: 0
[    5.238481] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.238482] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.238483] [drm:intel_dump_pipe_config] ips: 0
[    5.238483] [drm:intel_dump_pipe_config] double wide: 0
[    5.238484] [drm:intel_dump_pipe_config] planes on this crtc
[    5.238486] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    5.238488] [drm:intel_dump_pipe_config] 	FB:43, fb = 1280x1024 format = 0x34325258
[    5.238488] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0
[    5.238489] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    5.238491] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    5.238507] [drm:intel_get_shared_dpll] CRTC:20 allocated PCH DPLL A
[    5.238508] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[    5.269171] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 20
[    5.269176] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
[    5.269600] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
[    5.270968] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700
[    5.270970] [drm:gen6_fdi_link_train] FDI train 1 done.
[    5.271627] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
[    5.271629] [drm:gen6_fdi_link_train] FDI train 2 done.
[    5.271630] [drm:gen6_fdi_link_train] FDI train done.
[    5.271633] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 20
[    5.271634] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
[    5.273532] [drm:intel_connector_check_state] [CONNECTOR:38:HDMI-A-3]
[    5.273537] [drm:check_encoder_state] [ENCODER:27:DAC-27]
[    5.273539] [drm:check_encoder_state] [ENCODER:28:TMDS-28]
[    5.273541] [drm:check_encoder_state] [ENCODER:33:TMDS-33]
[    5.273543] [drm:check_encoder_state] [ENCODER:35:TMDS-35]
[    5.273545] [drm:check_encoder_state] [ENCODER:37:TMDS-37]
[    5.273547] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[    5.273550] [drm:check_encoder_state] [ENCODER:41:TMDS-41]
[    5.273552] [drm:check_crtc_state] [CRTC:20]
[    5.273566] [drm:check_crtc_state] [CRTC:24]
[    5.273567] [drm:check_shared_dpll_state] PCH DPLL A
[    5.273571] [drm:check_shared_dpll_state] PCH DPLL B
[    5.273584] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[    5.273586] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[    5.273589] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.273592] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.273594] [drm:drm_fb_helper_hotplug_event] 
[    5.273595] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1]
[    5.273595] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1
[    5.273598] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[    5.273599] [drm:intel_crt_detect] CRT not detected via hotplug
[    5.273824] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    5.273826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    5.273836] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    5.273837] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[    5.274239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    5.274240] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[    5.274241] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    5.274242] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] disconnected
[    5.274244] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1]
[    5.274244] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1]
[    5.274409] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    5.274411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    5.274412] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected
[    5.274414] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1]
[    5.274415] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[    5.274418] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected
[    5.274419] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2]
[    5.274420] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2]
[    5.274635] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    5.274637] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    5.274647] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected
[    5.274648] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3]
[    5.274649] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3]
[    5.287500] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[    5.287516] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] probed modes :
[    5.287518] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.287520] [drm:drm_mode_debug_printmodeline] Modeline 46:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[    5.287522] [drm:drm_mode_debug_printmodeline] Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    5.287523] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    5.287525] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    5.287526] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    5.287527] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2]
[    5.287528] [drm:intel_dp_detect] [CONNECTOR:40:DP-2]
[    5.287531] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected
[    5.287532] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3]
[    5.287533] [drm:intel_dp_detect] [CONNECTOR:42:DP-3]
[    5.290002] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.292467] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.295985] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.299985] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    5.301563] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected
[    5.301566] [drm:drm_setup_crtcs] 
[    5.301569] [drm:drm_enable_connectors] connector 26 enabled? no
[    5.301570] [drm:drm_enable_connectors] connector 29 enabled? no
[    5.301571] [drm:drm_enable_connectors] connector 34 enabled? no
[    5.301572] [drm:drm_enable_connectors] connector 36 enabled? no
[    5.301573] [drm:drm_enable_connectors] connector 38 enabled? yes
[    5.301574] [drm:drm_enable_connectors] connector 40 enabled? no
[    5.301575] [drm:drm_enable_connectors] connector 42 enabled? no
[    5.301585] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[    5.301585] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[    5.301586] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[    5.301587] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
[    5.301588] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-3
[    5.301588] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-3 0
[    5.301590] [drm:intel_fb_initial_config] connector HDMI-A-3 on pipe A [CRTC:20]: 1280x1024
[    5.301591] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
[    5.301591] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
[    5.301593] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 20 (0,0)
[    5.301619] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    5.301621] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.301624] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.301626] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.301628] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    5.301629] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    5.301630] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    5.301631] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    5.301632] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    5.301633] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    5.301634] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88022f5a2800 for pipe A
[    5.301635] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    5.301635] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    5.301637] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    5.301638] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.301640] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.301640] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.301641] [drm:intel_dump_pipe_config] requested mode:
[    5.301643] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.301643] [drm:intel_dump_pipe_config] adjusted mode:
[    5.301645] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.301647] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    5.301647] [drm:intel_dump_pipe_config] port clock: 108000
[    5.301648] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    5.301649] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.301649] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.301650] [drm:intel_dump_pipe_config] scaler id: 0
[    5.301651] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.301652] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.301653] [drm:intel_dump_pipe_config] ips: 0
[    5.301653] [drm:intel_dump_pipe_config] double wide: 0
[    5.301654] [drm:intel_dump_pipe_config] planes on this crtc
[    5.301656] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    5.301658] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    5.301658] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    5.301659] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    5.301660] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    5.301662] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[    5.301663] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[    5.301665] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.301668] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.301672] Console: switching to colour frame buffer device 160x64
[    5.301679] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    5.301680] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.301682] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.301684] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.301685] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    5.301686] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    5.301687] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    5.301688] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    5.301689] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    5.301689] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    5.301690] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88022f5a2000 for pipe A
[    5.301691] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    5.301692] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    5.301693] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    5.301694] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.301696] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.301696] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.301697] [drm:intel_dump_pipe_config] requested mode:
[    5.301699] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.301699] [drm:intel_dump_pipe_config] adjusted mode:
[    5.301701] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.301702] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    5.301703] [drm:intel_dump_pipe_config] port clock: 108000
[    5.301703] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    5.301704] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.301705] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.301705] [drm:intel_dump_pipe_config] scaler id: 0
[    5.301706] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.301707] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.301708] [drm:intel_dump_pipe_config] ips: 0
[    5.301708] [drm:intel_dump_pipe_config] double wide: 0
[    5.301709] [drm:intel_dump_pipe_config] planes on this crtc
[    5.301711] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    5.301712] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    5.301712] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    5.301713] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    5.301714] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    5.305336] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.305365] i915 0000:00:02.0: registered panic notifier
[    5.309424] dracut: Starting plymouth daemon
[    5.315864] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    5.315868] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.315872] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.315875] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.315878] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    5.315879] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    5.315880] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    5.315881] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    5.315883] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    5.315884] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    5.315885] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88022f992000 for pipe A
[    5.315886] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    5.315886] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    5.315888] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    5.315889] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.315890] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.315891] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.315892] [drm:intel_dump_pipe_config] requested mode:
[    5.315894] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.315895] [drm:intel_dump_pipe_config] adjusted mode:
[    5.315896] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.315898] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    5.315899] [drm:intel_dump_pipe_config] port clock: 108000
[    5.315899] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    5.315900] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.315900] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.315901] [drm:intel_dump_pipe_config] scaler id: 0
[    5.315902] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.315903] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.315904] [drm:intel_dump_pipe_config] ips: 0
[    5.315904] [drm:intel_dump_pipe_config] double wide: 0
[    5.315905] [drm:intel_dump_pipe_config] planes on this crtc
[    5.315908] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    5.315909] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    5.315909] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    5.315911] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    5.315912] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    5.325343] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    5.325346] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.325351] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.325354] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.325356] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    5.325357] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    5.325358] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    5.325359] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    5.325360] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    5.325361] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    5.325362] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88022f992800 for pipe A
[    5.325363] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    5.325364] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    5.325365] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    5.325367] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.325368] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.325369] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.325369] [drm:intel_dump_pipe_config] requested mode:
[    5.325371] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.325372] [drm:intel_dump_pipe_config] adjusted mode:
[    5.325373] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.325375] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    5.325376] [drm:intel_dump_pipe_config] port clock: 108000
[    5.325376] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    5.325377] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.325378] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.325378] [drm:intel_dump_pipe_config] scaler id: 0
[    5.325379] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.325380] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.325381] [drm:intel_dump_pipe_config] ips: 0
[    5.325382] [drm:intel_dump_pipe_config] double wide: 0
[    5.325382] [drm:intel_dump_pipe_config] planes on this crtc
[    5.325385] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    5.325386] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    5.325386] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    5.325388] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    5.325389] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    5.381261] e1000e 0000:00:19.0 em1: renamed from eth0
[    5.381874] tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
[    5.384065] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    5.384329] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.393176] iTCO_vendor_support: vendor-support=0
[    5.393316] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.393367] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    5.393498] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.394490] ppdev: user-space parallel port driver
[    5.396923] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.396972] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[    5.397008] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.397042] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    5.397072] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    5.397100] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    5.397126] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    5.397154] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    5.397183] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    5.398538] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    5.398541] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.398546] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    5.398550] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.398552] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    5.398553] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    5.398554] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    5.398555] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    5.398557] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    5.398558] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    5.398559] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002b01400 for pipe A
[    5.398560] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    5.398560] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    5.398562] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    5.398564] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.398565] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.398566] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.398566] [drm:intel_dump_pipe_config] requested mode:
[    5.398568] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.398569] [drm:intel_dump_pipe_config] adjusted mode:
[    5.398570] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    5.398572] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    5.398573] [drm:intel_dump_pipe_config] port clock: 108000
[    5.398573] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    5.398574] [drm:intel_dump_pipe_config] num_scalers: 0
[    5.398575] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    5.398575] [drm:intel_dump_pipe_config] scaler id: 0
[    5.398577] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.398577] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.398578] [drm:intel_dump_pipe_config] ips: 0
[    5.398579] [drm:intel_dump_pipe_config] double wide: 0
[    5.398579] [drm:intel_dump_pipe_config] planes on this crtc
[    5.398582] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    5.398584] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    5.398584] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    5.398585] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    5.398586] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    5.406170] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[    5.406204] EXT4-fs (sda3): write access will be enabled during recovery
[    5.415783] EXT4-fs (sda3): recovery complete
[    5.416326] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.429744] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
[    5.433737] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    5.436171] dracut: Checking ext4: /dev/sda3
[    5.436322] dracut: issuing e2fsck -a  /dev/sda3
[    5.440520] dracut: /dev/sda3: clean, 819155/4751360 files, 12617947/19000576 blocks
[    5.440910] dracut: Remounting /dev/sda3 with -o errors=remount-ro,ro
[    5.444375] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[    5.447638] dracut: Mounted root filesystem /dev/sda3
[    5.457251] device-mapper: uevent: version 1.0.3
[    5.457463] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[    5.935388] firewire_core 0000:04:03.0: created device fw0: GUID 00224dffff6cd2aa, S400
[    6.728526] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on RC6p off RC6pp off
[    6.732568] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
[    8.390124] floppy0: no floppy controllers found
[    8.409654] dracut: Switching root
[    8.446231] random: init urandom read with 43 bits of entropy available
[    8.467035] init: plymouth-upstart-bridge main process (2499) terminated with status 1
[    8.468484] init: plymouth-upstart-bridge main process ended, respawning
[    8.472523] init: plymouth-upstart-bridge main process (2509) terminated with status 1
[    8.473954] init: plymouth-upstart-bridge main process ended, respawning
[    8.478505] init: plymouth-upstart-bridge main process (2512) terminated with status 1
[    8.479939] init: plymouth-upstart-bridge main process ended, respawning
[    8.585493] systemd-udevd[2626]: starting version 204
[    8.661739] systemd-udevd[2789]: could not open moddep file '/lib/modules/4.0.0_drm-intel-nightly_b9fe35_20150421+/modules.dep.bin'
[    8.675017] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    8.675021] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    8.675026] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    8.675029] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    8.675032] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    8.675033] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    8.675035] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    8.675036] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    8.675037] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    8.675038] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    8.675040] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002f7f000 for pipe A
[    8.675040] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    8.675041] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    8.675043] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    8.675044] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    8.675045] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    8.675046] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    8.675047] [drm:intel_dump_pipe_config] requested mode:
[    8.675049] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.675050] [drm:intel_dump_pipe_config] adjusted mode:
[    8.675051] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.675053] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    8.675054] [drm:intel_dump_pipe_config] port clock: 108000
[    8.675054] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    8.675055] [drm:intel_dump_pipe_config] num_scalers: 0
[    8.675056] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    8.675056] [drm:intel_dump_pipe_config] scaler id: 0
[    8.675057] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    8.675058] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    8.675059] [drm:intel_dump_pipe_config] ips: 0
[    8.675059] [drm:intel_dump_pipe_config] double wide: 0
[    8.675060] [drm:intel_dump_pipe_config] planes on this crtc
[    8.675063] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    8.675065] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    8.675065] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    8.675066] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    8.675068] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    8.681957] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    8.681961] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    8.681965] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    8.681969] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    8.681971] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    8.681972] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    8.681974] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    8.681974] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    8.681976] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    8.681977] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    8.681978] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002f7c000 for pipe A
[    8.681979] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    8.681980] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    8.681982] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    8.681983] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    8.681984] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    8.681985] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    8.681985] [drm:intel_dump_pipe_config] requested mode:
[    8.681988] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.681988] [drm:intel_dump_pipe_config] adjusted mode:
[    8.681990] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.681992] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    8.681992] [drm:intel_dump_pipe_config] port clock: 108000
[    8.681993] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    8.681994] [drm:intel_dump_pipe_config] num_scalers: 0
[    8.681994] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    8.681995] [drm:intel_dump_pipe_config] scaler id: 0
[    8.681996] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    8.681997] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    8.681998] [drm:intel_dump_pipe_config] ips: 0
[    8.681998] [drm:intel_dump_pipe_config] double wide: 0
[    8.681999] [drm:intel_dump_pipe_config] planes on this crtc
[    8.682002] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    8.682003] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    8.682004] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    8.682005] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    8.682007] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    8.694180] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    8.694184] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    8.694188] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    8.694192] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    8.694194] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    8.694195] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    8.694197] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    8.694198] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    8.694200] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    8.694201] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    8.694202] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002f7e800 for pipe A
[    8.694203] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    8.694203] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    8.694205] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    8.694206] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    8.694207] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    8.694208] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    8.694209] [drm:intel_dump_pipe_config] requested mode:
[    8.694211] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.694212] [drm:intel_dump_pipe_config] adjusted mode:
[    8.694213] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.694215] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    8.694216] [drm:intel_dump_pipe_config] port clock: 108000
[    8.694216] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    8.694217] [drm:intel_dump_pipe_config] num_scalers: 0
[    8.694218] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    8.694218] [drm:intel_dump_pipe_config] scaler id: 0
[    8.694219] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    8.694220] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    8.694221] [drm:intel_dump_pipe_config] ips: 0
[    8.694222] [drm:intel_dump_pipe_config] double wide: 0
[    8.694222] [drm:intel_dump_pipe_config] planes on this crtc
[    8.694225] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    8.694227] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[    8.694227] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    8.694228] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    8.694229] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    8.698702] pegasus 3-1.6:1.0 eth2: renamed from eth1
[    8.712770] systemd-udevd[2766]: renamed network interface eth1 to eth2
[    8.734385] [drm:i915_gem_open] 
[    8.734389] [drm:i915_gem_object_create_stolen] creating stolen object: size=2000
[    8.734392] [drm:i915_pages_create_for_stolen] offset=0x0, size=8192
[    8.734464] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    8.734468] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    8.734472] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    8.734476] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    8.734479] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    8.734481] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    8.734483] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    8.734484] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    8.734486] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    8.734488] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    8.734490] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880234549c00 for pipe A
[    8.734491] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    8.734492] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    8.734495] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    8.734497] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    8.734499] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    8.734500] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    8.734501] [drm:intel_dump_pipe_config] requested mode:
[    8.734504] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.734505] [drm:intel_dump_pipe_config] adjusted mode:
[    8.734507] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.734510] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    8.734511] [drm:intel_dump_pipe_config] port clock: 108000
[    8.734512] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    8.734514] [drm:intel_dump_pipe_config] num_scalers: 0
[    8.734515] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    8.734516] [drm:intel_dump_pipe_config] scaler id: 0
[    8.734518] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    8.734519] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    8.734521] [drm:intel_dump_pipe_config] ips: 0
[    8.734522] [drm:intel_dump_pipe_config] double wide: 0
[    8.734523] [drm:intel_dump_pipe_config] planes on this crtc
[    8.734525] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    8.734527] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258<7>[    8.734529] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    8.734531] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    8.734533] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    8.734535] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[    8.734537] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[    8.734540] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    8.734543] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    8.734552] [drm:i915_gem_open] 
[    8.734554] [drm:i915_gem_object_create_stolen] creating stolen object: size=2000
[    8.734556] [drm:i915_pages_create_for_stolen] offset=0x0, size=8192
[    8.734582] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[    8.734584] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    8.734587] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    8.734590] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    8.734592] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[    8.734593] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[    8.734595] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[    8.734596] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[    8.734597] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[    8.734599] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[    8.734601] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88023454ac00 for pipe A
[    8.734602] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    8.734603] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[    8.734605] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[    8.734607] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    8.734609] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    8.734610] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    8.734612] [drm:intel_dump_pipe_config] requested mode:
[    8.734614] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.734615] [drm:intel_dump_pipe_config] adjusted mode:
[    8.734617] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.734620] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[    8.734621] [drm:intel_dump_pipe_config] port clock: 108000
[    8.734622] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[    8.734623] [drm:intel_dump_pipe_config] num_scalers: 0
[    8.734624] [drm:intel_dump_pipe_config] scaler_users: 0x0
[    8.734625] [drm:intel_dump_pipe_config] scaler id: 0
[    8.734627] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    8.734629] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    8.734630] [drm:intel_dump_pipe_config] ips: 0
[    8.734631] [drm:intel_dump_pipe_config] double wide: 0
[    8.734632] [drm:intel_dump_pipe_config] planes on this crtc
[    8.734634] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[    8.734635] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258<7>[    8.734637] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[    8.734639] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[    8.734641] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[    8.734643] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[    8.734645] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[    8.734647] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[    8.734650] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    8.734657] [drm:i915_gem_open] 
[    8.734659] [drm:i915_gem_object_create_stolen] creating stolen object: size=2000
[    8.734661] [drm:i915_pages_create_for_stolen] offset=0x0, size=8192
[    8.734694] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[    8.734696] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[    8.734701] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[    8.734704] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1]
[    8.734705] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1
[    8.734709] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[    8.734711] [drm:intel_crt_detect] CRT not detected via hotplug
[    8.735219] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    8.735221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    8.735223] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    8.735225] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[    8.735632] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    8.735634] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[    8.735635] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    8.735637] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] disconnected
[    8.735642] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[    8.735644] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1]
[    8.735645] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1
[    8.735648] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[    8.735650] [drm:intel_crt_detect] CRT not detected via hotplug
[    8.735811] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    8.735813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    8.735814] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    8.735816] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[    8.736220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    8.736221] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[    8.736222] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    8.736224] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] disconnected
[    8.736229] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[    8.736231] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1]
[    8.736233] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1]
[    8.736403] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    8.736405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    8.736407] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected
[    8.736410] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[    8.736412] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1]
[    8.736413] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1]
[    8.736571] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[    8.736573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[    8.736575] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected
[    8.736579] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
[    8.736581] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1]
[    8.736582] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[    8.736586] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected
[    8.736588] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
[    8.736589] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1]
[    8.736590] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[    8.736593] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected
[    8.736595] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
[    8.736597] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2]
[    8.736598] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2]
[    8.736787] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    8.736789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    8.736791] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected
[    8.736794] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
[    8.736795] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2]
[    8.736797] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2]
[    8.736957] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    8.736959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    8.736960] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected
[    8.736965] [drm:drm_mode_getconnector] [CONNECTOR:38:?]
[    8.736966] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3]
[    8.736968] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3]
[    8.750073] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[    8.750080] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] probed modes :
[    8.750083] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[    8.750086] [drm:drm_mode_debug_printmodeline] Modeline 46:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[    8.750088] [drm:drm_mode_debug_printmodeline] Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    8.750091] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    8.750093] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    8.750095] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[    8.750102] [drm:drm_mode_getconnector] [CONNECTOR:38:?]
[    8.753056] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[    8.753059] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2]
[    8.753061] [drm:intel_dp_detect] [CONNECTOR:40:DP-2]
[    8.753067] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected
[    8.753070] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[    8.753071] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2]
[    8.753073] [drm:intel_dp_detect] [CONNECTOR:40:DP-2]
[    8.753075] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected
[    8.753079] [drm:drm_mode_getconnector] [CONNECTOR:42:?]
[    8.753081] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3]
[    8.753082] [drm:intel_dp_detect] [CONNECTOR:42:DP-3]
[    8.755606] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.758253] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.761975] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.764681] Adding 1952764k swap on /dev/sda2.  Priority:-1 extents:1 across:1952764k SS
[    8.765990] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.767486] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected
[    8.767495] [drm:drm_mode_getconnector] [CONNECTOR:42:?]
[    8.767497] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3]
[    8.767499] [drm:intel_dp_detect] [CONNECTOR:42:DP-3]
[    8.769976] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.772438] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.775973] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.780590] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    8.781054] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[    8.782505] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected
[    8.782530] [drm:drm_mode_addfb2] [FB:51]
[    8.876383] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[    8.946543] init: idmapd-mounting (/lib/modules/4.0.0_drm-intel-nightly_d60065_20150417+) main process (3252) killed by TERM signal
[    8.989934] init: statd-mounting (/lib/modules/4.0.0_drm-intel-nightly_d60065_20150417+) main process (3253) killed by TERM signal
[    8.990625] init: failsafe main process (3402) killed by TERM signal
[    9.025756] init: bluetooth main process (3454) terminated with status 1
[    9.025763] init: bluetooth main process ended, respawning
[    9.099522] init: bluetooth main process (3605) terminated with status 1
[    9.099530] init: bluetooth main process ended, respawning
[    9.276256] init: bluetooth main process (3765) terminated with status 1
[    9.276266] init: bluetooth main process ended, respawning
[    9.303248] init: gdm main process (3720) killed by TERM signal
[    9.338061] init: bluetooth main process (3854) terminated with status 1
[    9.338071] init: bluetooth main process ended, respawning
[    9.368126] init: bluetooth main process (3906) terminated with status 1
[    9.368135] init: bluetooth main process ended, respawning
[    9.397767] init: bluetooth main process (3947) terminated with status 1
[    9.397777] init: bluetooth main process ended, respawning
[    9.415983] init: bluetooth main process (3977) terminated with status 1
[    9.415992] init: bluetooth main process ended, respawning
[    9.431859] init: bluetooth main process (4001) terminated with status 1
[    9.431868] init: bluetooth main process ended, respawning
[    9.447219] init: bluetooth main process (4025) terminated with status 1
[    9.447229] init: bluetooth main process ended, respawning
[    9.462580] init: bluetooth main process (4049) terminated with status 1
[    9.462590] init: bluetooth main process ended, respawning
[    9.477513] init: bluetooth main process (4073) terminated with status 1
[    9.477523] init: bluetooth respawning too fast, stopped
[   10.341243] random: nonblocking pool is initialized
[   11.387387] NET: Registered protocol family 10
[   11.388623] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[   57.509531] usb 3-1.1: USB disconnect, device number 3
[   58.967941] usb 3-1.1: new low-speed USB device number 6 using ehci-pci
[   59.057410] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[   59.057415] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   59.057417] usb 3-1.1: Product: USB Optical Mouse
[   59.057420] usb 3-1.1: Manufacturer: Logitech
[   59.059951] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0004/input/input9
[   59.111183] hid-generic 0003:046D:C05A.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  107.486278] usb 3-1.1: USB disconnect, device number 6
[  108.688781] usb 3-1.1: new low-speed USB device number 7 using ehci-pci
[  108.779092] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  108.779096] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  108.779100] usb 3-1.1: Product: USB Optical Mouse
[  108.779102] usb 3-1.1: Manufacturer: Logitech
[  108.781554] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0005/input/input10
[  108.831991] hid-generic 0003:046D:C05A.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  157.206707] usb 3-1.1: USB disconnect, device number 7
[  158.408452] usb 3-1.1: new low-speed USB device number 8 using ehci-pci
[  158.498047] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  158.498051] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  158.498054] usb 3-1.1: Product: USB Optical Mouse
[  158.498056] usb 3-1.1: Manufacturer: Logitech
[  158.500399] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0006/input/input11
[  158.550749] hid-generic 0003:046D:C05A.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  206.927188] usb 3-1.1: USB disconnect, device number 8
[  208.129299] usb 3-1.1: new low-speed USB device number 9 using ehci-pci
[  208.218775] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  208.218779] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  208.218782] usb 3-1.1: Product: USB Optical Mouse
[  208.218785] usb 3-1.1: Manufacturer: Logitech
[  208.221233] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0007/input/input12
[  208.271523] hid-generic 0003:046D:C05A.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  256.647639] usb 3-1.1: USB disconnect, device number 9
[  257.850146] usb 3-1.1: new low-speed USB device number 10 using ehci-pci
[  257.940456] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  257.940460] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  257.940463] usb 3-1.1: Product: USB Optical Mouse
[  257.940466] usb 3-1.1: Manufacturer: Logitech
[  257.942934] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0008/input/input13
[  257.993329] hid-generic 0003:046D:C05A.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  306.368098] usb 3-1.1: USB disconnect, device number 10
[  307.569980] usb 3-1.1: new low-speed USB device number 11 using ehci-pci
[  307.660436] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  307.660440] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  307.660443] usb 3-1.1: Product: USB Optical Mouse
[  307.660446] usb 3-1.1: Manufacturer: Logitech
[  307.662724] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0009/input/input14
[  307.662822] hid-generic 0003:046D:C05A.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  356.088426] usb 3-1.1: USB disconnect, device number 11
[  357.290670] usb 3-1.1: new low-speed USB device number 12 using ehci-pci
[  357.380116] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  357.380120] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  357.380123] usb 3-1.1: Product: USB Optical Mouse
[  357.380126] usb 3-1.1: Manufacturer: Logitech
[  357.382725] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.000A/input/input15
[  357.433923] hid-generic 0003:046D:C05A.000A: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  405.809027] usb 3-1.1: USB disconnect, device number 12
[  407.011518] usb 3-1.1: new low-speed USB device number 13 using ehci-pci
[  407.101847] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  407.101851] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  407.101854] usb 3-1.1: Product: USB Optical Mouse
[  407.101857] usb 3-1.1: Manufacturer: Logitech
[  407.104300] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.000B/input/input16
[  407.154693] hid-generic 0003:046D:C05A.000B: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  455.529461] usb 3-1.1: USB disconnect, device number 13
[  456.731344] usb 3-1.1: new low-speed USB device number 14 using ehci-pci
[  456.821797] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  456.821802] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  456.821805] usb 3-1.1: Product: USB Optical Mouse
[  456.821807] usb 3-1.1: Manufacturer: Logitech
[  456.824109] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.000C/input/input17
[  456.874483] hid-generic 0003:046D:C05A.000C: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  505.249788] usb 3-1.1: USB disconnect, device number 14
[  506.452031] usb 3-1.1: new low-speed USB device number 15 using ehci-pci
[  506.541632] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  506.541636] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  506.541639] usb 3-1.1: Product: USB Optical Mouse
[  506.541642] usb 3-1.1: Manufacturer: Logitech
[  506.544087] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.000D/input/input18
[  506.544321] hid-generic 0003:046D:C05A.000D: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  521.194079] kms_pipe_crc_basic: executing
[  521.194151] [drm:i915_gem_open] 
[  521.194155] [drm:i915_gem_object_create_stolen] creating stolen object: size=2000
[  521.194158] [drm:i915_pages_create_for_stolen] offset=0x2000, size=8192
[  521.194213] ------------[ cut here ]------------
[  521.194231] WARNING: CPU: 2 PID: 4666 at drivers/gpu/drm/i915/i915_gem_execbuffer.c:1256 i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]()
[  521.194232] render ring didn't clear reload
[  521.194233] Modules linked in: ipv6 dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev serio_raw pcspkr i2c_i801 firewire_ohci lpc_ich firewire_core mfd_core crc_itu_t snd_hda_intel snd_hda_controller joydev snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
[  521.194252] CPU: 2 PID: 4666 Comm: kms_pipe_crc_ba Not tainted 4.0.0_drm-intel-nightly_b9fe35_20150421+ #368
[  521.194254] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
[  521.194255]  0000000000000000 0000000000000009 ffffffff81795847 ffff88022f217bb8
[  521.194258]  ffffffff8103bd5a ffff88022f2002a8 ffffffffa0096618 ffff88022f2001c0
[  521.194260]  ffff88022f191c98 0000000000000000 ffff88022f217e18 ffff88022f190000
[  521.194262] Call Trace:
[  521.194268]  [<ffffffff81795847>] ? dump_stack+0x40/0x50
[  521.194272]  [<ffffffff8103bd5a>] ? warn_slowpath_common+0x98/0xb0
[  521.194282]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.194285]  [<ffffffff8103bdb7>] ? warn_slowpath_fmt+0x45/0x4a
[  521.194295]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.194304]  [<ffffffffa0095ff0>] ? i915_gem_do_execbuffer.isra.13+0xca6/0xd88 [i915]
[  521.194316]  [<ffffffffa00a138a>] ? i915_gem_pwrite_ioctl+0x75a/0x7e0 [i915]
[  521.194320]  [<ffffffff8110948a>] ? __kmalloc+0x65/0x13d
[  521.194330]  [<ffffffffa0097085>] ? i915_gem_execbuffer2+0x16e/0x205 [i915]
[  521.194336]  [<ffffffffa00047ae>] ? drm_ioctl+0x322/0x38d [drm]
[  521.194346]  [<ffffffffa0096f17>] ? i915_gem_execbuffer+0x339/0x339 [i915]
[  521.194349]  [<ffffffff8111daa6>] ? do_vfs_ioctl+0x360/0x424
[  521.194353]  [<ffffffff81032a63>] ? __do_page_fault+0x345/0x3d8
[  521.194356]  [<ffffffff8104fad2>] ? task_work_run+0x84/0x96
[  521.194358]  [<ffffffff8111dbb3>] ? SyS_ioctl+0x49/0x7a
[  521.194361]  [<ffffffff8179cb62>] ? page_fault+0x22/0x30
[  521.194363]  [<ffffffff8179b0f2>] ? system_call_fastpath+0x12/0x17
[  521.194365] ---[ end trace b4b0568189ffbb6d ]---
[  521.194374] ------------[ cut here ]------------
[  521.194384] WARNING: CPU: 2 PID: 4666 at drivers/gpu/drm/i915/i915_gem_execbuffer.c:1256 i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]()
[  521.194385] blitter ring didn't clear reload
[  521.194386] Modules linked in: ipv6 dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev serio_raw pcspkr i2c_i801 firewire_ohci lpc_ich firewire_core mfd_core crc_itu_t snd_hda_intel snd_hda_controller joydev snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
[  521.194402] CPU: 2 PID: 4666 Comm: kms_pipe_crc_ba Tainted: G        W       4.0.0_drm-intel-nightly_b9fe35_20150421+ #368
[  521.194404] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
[  521.194405]  0000000000000000 0000000000000009 ffffffff81795847 ffff88022f217bb8
[  521.194407]  ffffffff8103bd5a 0000000000000010 ffffffffa0096618 ffff8800b86ea1c0
[  521.194409]  ffff88022f194108 0000000000000000 ffff88022f217e18 ffff88022f190000
[  521.194411] Call Trace:
[  521.194414]  [<ffffffff81795847>] ? dump_stack+0x40/0x50
[  521.194416]  [<ffffffff8103bd5a>] ? warn_slowpath_common+0x98/0xb0
[  521.194425]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.194428]  [<ffffffff8103bdb7>] ? warn_slowpath_fmt+0x45/0x4a
[  521.194437]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.194446]  [<ffffffffa0095ff0>] ? i915_gem_do_execbuffer.isra.13+0xca6/0xd88 [i915]
[  521.194457]  [<ffffffffa00a138a>] ? i915_gem_pwrite_ioctl+0x75a/0x7e0 [i915]
[  521.194460]  [<ffffffff8110948a>] ? __kmalloc+0x65/0x13d
[  521.194469]  [<ffffffffa0097085>] ? i915_gem_execbuffer2+0x16e/0x205 [i915]
[  521.194475]  [<ffffffffa00047ae>] ? drm_ioctl+0x322/0x38d [drm]
[  521.194484]  [<ffffffffa0096f17>] ? i915_gem_execbuffer+0x339/0x339 [i915]
[  521.194487]  [<ffffffff8111daa6>] ? do_vfs_ioctl+0x360/0x424
[  521.194489]  [<ffffffff81032a63>] ? __do_page_fault+0x345/0x3d8
[  521.194491]  [<ffffffff8104fad2>] ? task_work_run+0x84/0x96
[  521.194494]  [<ffffffff8111dbb3>] ? SyS_ioctl+0x49/0x7a
[  521.194496]  [<ffffffff8179cb62>] ? page_fault+0x22/0x30
[  521.194498]  [<ffffffff8179b0f2>] ? system_call_fastpath+0x12/0x17
[  521.194499] ---[ end trace b4b0568189ffbb6e ]---
[  521.194503] ------------[ cut here ]------------
[  521.194512] WARNING: CPU: 2 PID: 4666 at drivers/gpu/drm/i915/i915_gem_execbuffer.c:1256 i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]()
[  521.194513] bsd ring didn't clear reload
[  521.194514] Modules linked in: ipv6 dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev serio_raw pcspkr i2c_i801 firewire_ohci lpc_ich firewire_core mfd_core crc_itu_t snd_hda_intel snd_hda_controller joydev snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
[  521.194530] CPU: 2 PID: 4666 Comm: kms_pipe_crc_ba Tainted: G        W       4.0.0_drm-intel-nightly_b9fe35_20150421+ #368
[  521.194531] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
[  521.194532]  0000000000000000 0000000000000009 ffffffff81795847 ffff88022f217bb8
[  521.194534]  ffffffff8103bd5a 0000000000000010 ffffffffa0096618 ffff8800b86ea1c0
[  521.194536]  ffff88022f192ed0 0000000000000000 ffff88022f217e18 ffff88022f190000
[  521.194538] Call Trace:
[  521.194540]  [<ffffffff81795847>] ? dump_stack+0x40/0x50
[  521.194543]  [<ffffffff8103bd5a>] ? warn_slowpath_common+0x98/0xb0
[  521.194552]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.194554]  [<ffffffff8103bdb7>] ? warn_slowpath_fmt+0x45/0x4a
[  521.194564]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.194573]  [<ffffffffa0095ff0>] ? i915_gem_do_execbuffer.isra.13+0xca6/0xd88 [i915]
[  521.194583]  [<ffffffffa00a138a>] ? i915_gem_pwrite_ioctl+0x75a/0x7e0 [i915]
[  521.194586]  [<ffffffff8110948a>] ? __kmalloc+0x65/0x13d
[  521.194595]  [<ffffffffa0097085>] ? i915_gem_execbuffer2+0x16e/0x205 [i915]
[  521.194601]  [<ffffffffa00047ae>] ? drm_ioctl+0x322/0x38d [drm]
[  521.194610]  [<ffffffffa0096f17>] ? i915_gem_execbuffer+0x339/0x339 [i915]
[  521.194613]  [<ffffffff8111daa6>] ? do_vfs_ioctl+0x360/0x424
[  521.194615]  [<ffffffff81032a63>] ? __do_page_fault+0x345/0x3d8
[  521.194617]  [<ffffffff8104fad2>] ? task_work_run+0x84/0x96
[  521.194620]  [<ffffffff8111dbb3>] ? SyS_ioctl+0x49/0x7a
[  521.194622]  [<ffffffff8179cb62>] ? page_fault+0x22/0x30
[  521.194624]  [<ffffffff8179b0f2>] ? system_call_fastpath+0x12/0x17
[  521.194625] ---[ end trace b4b0568189ffbb6f ]---
[  521.194695] [drm:i915_gem_open] 
[  521.194698] [drm:i915_gem_object_create_stolen] creating stolen object: size=2000
[  521.194700] [drm:i915_pages_create_for_stolen] offset=0x4000, size=8192
[  521.194709] [drm:i915_gem_open] 
[  521.194711] [drm:i915_gem_object_create_stolen] creating stolen object: size=2000
[  521.194713] [drm:i915_pages_create_for_stolen] offset=0x6000, size=8192
[  521.194718] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.194724] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.194730] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[  521.194732] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1]
[  521.194734] [drm:intel_crt_detect] [CONNECTOR:26:VGA-1] force=1
[  521.194738] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[  521.194739] [drm:intel_crt_detect] CRT not detected via hotplug
[  521.194938] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[  521.194941] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[  521.194943] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  521.194945] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[  521.195335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[  521.195337] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[  521.195338] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[  521.195340] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] disconnected
[  521.195346] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[  521.195370] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[  521.195372] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1]
[  521.195374] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1]
[  521.195567] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[  521.195572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[  521.195583] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected
[  521.195588] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[  521.195591] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
[  521.195593] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1]
[  521.195595] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[  521.195599] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected
[  521.195601] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
[  521.195603] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
[  521.195604] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2]
[  521.195606] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2]
[  521.195780] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  521.195795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  521.195800] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected
[  521.195808] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
[  521.195812] [drm:drm_mode_getconnector] [CONNECTOR:38:?]
[  521.195814] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3]
[  521.195815] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3]
[  521.208661] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[  521.208668] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] probed modes :
[  521.208671] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  521.208674] [drm:drm_mode_debug_printmodeline] Modeline 46:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[  521.208676] [drm:drm_mode_debug_printmodeline] Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  521.208678] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  521.208680] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  521.208683] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  521.208687] [drm:drm_mode_getconnector] [CONNECTOR:38:?]
[  521.208692] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  521.208694] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2]
[  521.208695] [drm:intel_dp_detect] [CONNECTOR:40:DP-2]
[  521.208699] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected
[  521.208701] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  521.208704] [drm:drm_mode_getconnector] [CONNECTOR:42:?]
[  521.208705] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3]
[  521.208706] [drm:intel_dp_detect] [CONNECTOR:42:DP-3]
[  521.211176] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.213642] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.217247] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.221254] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.222790] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected
[  521.222796] [drm:drm_mode_getconnector] [CONNECTOR:42:?]
[  521.222878] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.222881] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.222976] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.222978] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.222980] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[  521.222982] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1]
[  521.223191] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[  521.223194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[  521.223197] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[  521.223199] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[  521.223603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[  521.223604] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[  521.223610] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:VGA-1] probed modes :
[  521.223612] [drm:drm_mode_debug_printmodeline] Modeline 56:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  521.223615] [drm:drm_mode_debug_printmodeline] Modeline 54:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  521.223617] [drm:drm_mode_debug_printmodeline] Modeline 53:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[  521.223619] [drm:drm_mode_debug_printmodeline] Modeline 55:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[  521.223621] [drm:drm_mode_debug_printmodeline] Modeline 51:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[  521.223624] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
[  521.223642] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.223644] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.223646] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[  521.223648] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1]
[  521.223649] [drm:intel_hdmi_detect] [CONNECTOR:29:HDMI-A-1]
[  521.223813] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
[  521.223821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[  521.223829] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:HDMI-A-1] disconnected
[  521.223840] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[  521.223847] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.223858] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.223860] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
[  521.223862] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1]
[  521.223864] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[  521.223867] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:DP-1] disconnected
[  521.223869] [drm:drm_mode_getconnector] [CONNECTOR:34:?]
[  521.223872] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.223874] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.223875] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
[  521.223877] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2]
[  521.223878] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-2]
[  521.224051] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  521.224054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  521.224057] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-2] disconnected
[  521.224068] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
[  521.224072] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.224073] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.224075] [drm:drm_mode_getconnector] [CONNECTOR:38:?]
[  521.224077] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3]
[  521.224078] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-3]
[  521.236844] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[  521.236849] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:HDMI-A-3] probed modes :
[  521.236851] [drm:drm_mode_debug_printmodeline] Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  521.236853] [drm:drm_mode_debug_printmodeline] Modeline 46:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[  521.236856] [drm:drm_mode_debug_printmodeline] Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[  521.236858] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[  521.236860] [drm:drm_mode_debug_printmodeline] Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[  521.236862] [drm:drm_mode_debug_printmodeline] Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[  521.236866] [drm:drm_mode_getconnector] [CONNECTOR:38:?]
[  521.236881] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.236883] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.236885] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  521.236887] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2]
[  521.236888] [drm:intel_dp_detect] [CONNECTOR:40:DP-2]
[  521.236891] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-2] disconnected
[  521.236893] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  521.236896] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.236898] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[7] ENCODERS[7]
[  521.236899] [drm:drm_mode_getconnector] [CONNECTOR:42:?]
[  521.236901] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3]
[  521.236902] [drm:intel_dp_detect] [CONNECTOR:42:DP-3]
[  521.239371] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.241840] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.246283] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.250279] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f
[  521.251824] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:42:DP-3] disconnected
[  521.251829] [drm:drm_mode_getconnector] [CONNECTOR:42:?]
[  521.251866] kms_pipe_crc_basic: starting subtest bad-pipe
[  521.251889] [drm:display_crc_ctl_parse] unknown pipe D
[  521.251932] kms_pipe_crc_basic: exiting, ret=0
[  521.251985] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0)
[  521.251987] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  521.251990] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[  521.251993] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  521.251995] [drm:connected_sink_compute_bpp] [CONNECTOR:38:HDMI-A-3] checking for sink bpp constrains
[  521.251996] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[  521.251997] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
[  521.251998] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
[  521.252000] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2
[  521.252001] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
[  521.252002] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88023454a800 for pipe A
[  521.252003] [drm:intel_dump_pipe_config] cpu_transcoder: A
[  521.252004] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
[  521.252006] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
[  521.252007] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  521.252008] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  521.252009] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  521.252010] [drm:intel_dump_pipe_config] requested mode:
[  521.252012] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  521.252012] [drm:intel_dump_pipe_config] adjusted mode:
[  521.252014] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[  521.252015] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
[  521.252016] [drm:intel_dump_pipe_config] port clock: 108000
[  521.252017] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
[  521.252017] [drm:intel_dump_pipe_config] num_scalers: 0
[  521.252018] [drm:intel_dump_pipe_config] scaler_users: 0x0
[  521.252019] [drm:intel_dump_pipe_config] scaler id: 0
[  521.252020] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  521.252021] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  521.252021] [drm:intel_dump_pipe_config] ips: 0
[  521.252022] [drm:intel_dump_pipe_config] double wide: 0
[  521.252022] [drm:intel_dump_pipe_config] planes on this crtc
[  521.252025] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
[  521.252027] [drm:intel_dump_pipe_config] 	FB:52, fb = 1280x1024 format = 0x34325258
[  521.252027] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1280x1024 dst (0, 0) 1280x1024
[  521.252028] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
[  521.252029] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
[  521.252031] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[  521.252032] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[  521.252034] [drm:intel_modeset_stage_output_state] [CONNECTOR:38:HDMI-A-3] to [CRTC:20]
[  521.252037] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  521.255526] ------------[ cut here ]------------
[  521.255539] WARNING: CPU: 0 PID: 4666 at drivers/gpu/drm/i915/i915_gem_execbuffer.c:1256 i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]()
[  521.255541] render ring didn't clear reload
[  521.255542] Modules linked in: ipv6 dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev serio_raw pcspkr i2c_i801 firewire_ohci lpc_ich firewire_core mfd_core crc_itu_t snd_hda_intel snd_hda_controller joydev snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
[  521.255559] CPU: 0 PID: 4666 Comm: kms_pipe_crc_ba Tainted: G        W       4.0.0_drm-intel-nightly_b9fe35_20150421+ #368
[  521.255560] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
[  521.255561]  0000000000000000 0000000000000009 ffffffff81795847 ffff88022f217bb8
[  521.255564]  ffffffff8103bd5a ffff8800b86ea0e8 ffffffffa0096618 ffff8800b86ea000
[  521.255566]  ffff88022f191c98 0000000000000000 ffff88022f217e18 ffff88022f190000
[  521.255568] Call Trace:
[  521.255571]  [<ffffffff81795847>] ? dump_stack+0x40/0x50
[  521.255574]  [<ffffffff8103bd5a>] ? warn_slowpath_common+0x98/0xb0
[  521.255584]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.255587]  [<ffffffff8103bdb7>] ? warn_slowpath_fmt+0x45/0x4a
[  521.255597]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.255606]  [<ffffffffa0095ff0>] ? i915_gem_do_execbuffer.isra.13+0xca6/0xd88 [i915]
[  521.255618]  [<ffffffffa00a138a>] ? i915_gem_pwrite_ioctl+0x75a/0x7e0 [i915]
[  521.255621]  [<ffffffff8110948a>] ? __kmalloc+0x65/0x13d
[  521.255630]  [<ffffffffa0097085>] ? i915_gem_execbuffer2+0x16e/0x205 [i915]
[  521.255636]  [<ffffffffa00047ae>] ? drm_ioctl+0x322/0x38d [drm]
[  521.255646]  [<ffffffffa0096f17>] ? i915_gem_execbuffer+0x339/0x339 [i915]
[  521.255648]  [<ffffffff811207a8>] ? dput+0x24/0x1aa
[  521.255651]  [<ffffffff8111daa6>] ? do_vfs_ioctl+0x360/0x424
[  521.255653]  [<ffffffff8104fad2>] ? task_work_run+0x84/0x96
[  521.255655]  [<ffffffff8111dbb3>] ? SyS_ioctl+0x49/0x7a
[  521.255657]  [<ffffffff8179b329>] ? int_signal+0x12/0x17
[  521.255659]  [<ffffffff8179b0f2>] ? system_call_fastpath+0x12/0x17
[  521.255661] ---[ end trace b4b0568189ffbb70 ]---
[  521.255667] ------------[ cut here ]------------
[  521.255677] WARNING: CPU: 0 PID: 4666 at drivers/gpu/drm/i915/i915_gem_execbuffer.c:1256 i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]()
[  521.255678] blitter ring didn't clear reload
[  521.255679] Modules linked in: ipv6 dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev serio_raw pcspkr i2c_i801 firewire_ohci lpc_ich firewire_core mfd_core crc_itu_t snd_hda_intel snd_hda_controller joydev snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
[  521.255694] CPU: 0 PID: 4666 Comm: kms_pipe_crc_ba Tainted: G        W       4.0.0_drm-intel-nightly_b9fe35_20150421+ #368
[  521.255696] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
[  521.255697]  0000000000000000 0000000000000009 ffffffff81795847 ffff88022f217bb8
[  521.255699]  ffffffff8103bd5a 0000000000000010 ffffffffa0096618 ffff88022f201180
[  521.255701]  ffff88022f194108 0000000000000000 ffff88022f217e18 ffff88022f190000
[  521.255703] Call Trace:
[  521.255705]  [<ffffffff81795847>] ? dump_stack+0x40/0x50
[  521.255708]  [<ffffffff8103bd5a>] ? warn_slowpath_common+0x98/0xb0
[  521.255717]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.255719]  [<ffffffff8103bdb7>] ? warn_slowpath_fmt+0x45/0x4a
[  521.255729]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.255738]  [<ffffffffa0095ff0>] ? i915_gem_do_execbuffer.isra.13+0xca6/0xd88 [i915]
[  521.255749]  [<ffffffffa00a138a>] ? i915_gem_pwrite_ioctl+0x75a/0x7e0 [i915]
[  521.255751]  [<ffffffff8110948a>] ? __kmalloc+0x65/0x13d
[  521.255761]  [<ffffffffa0097085>] ? i915_gem_execbuffer2+0x16e/0x205 [i915]
[  521.255766]  [<ffffffffa00047ae>] ? drm_ioctl+0x322/0x38d [drm]
[  521.255775]  [<ffffffffa0096f17>] ? i915_gem_execbuffer+0x339/0x339 [i915]
[  521.255777]  [<ffffffff811207a8>] ? dput+0x24/0x1aa
[  521.255780]  [<ffffffff8111daa6>] ? do_vfs_ioctl+0x360/0x424
[  521.255782]  [<ffffffff8104fad2>] ? task_work_run+0x84/0x96
[  521.255784]  [<ffffffff8111dbb3>] ? SyS_ioctl+0x49/0x7a
[  521.255786]  [<ffffffff8179b329>] ? int_signal+0x12/0x17
[  521.255788]  [<ffffffff8179b0f2>] ? system_call_fastpath+0x12/0x17
[  521.255789] ---[ end trace b4b0568189ffbb71 ]---
[  521.255794] ------------[ cut here ]------------
[  521.255803] WARNING: CPU: 0 PID: 4666 at drivers/gpu/drm/i915/i915_gem_execbuffer.c:1256 i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]()
[  521.255804] bsd ring didn't clear reload
[  521.255805] Modules linked in: ipv6 dm_mod snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support ppdev serio_raw pcspkr i2c_i801 firewire_ohci lpc_ich firewire_core mfd_core crc_itu_t snd_hda_intel snd_hda_controller joydev snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore parport_pc parport tpm_tis tpm acpi_cpufreq i915 button video drm_kms_helper drm
[  521.255825] CPU: 0 PID: 4666 Comm: kms_pipe_crc_ba Tainted: G        W       4.0.0_drm-intel-nightly_b9fe35_20150421+ #368
[  521.255826] Hardware name:                  /DQ67SW, BIOS SWQ6710H.86A.0060.2011.1220.1805 12/20/2011
[  521.255827]  0000000000000000 0000000000000009 ffffffff81795847 ffff88022f217bb8
[  521.255830]  ffffffff8103bd5a 0000000000000010 ffffffffa0096618 ffff88022f201180
[  521.255832]  ffff88022f192ed0 0000000000000000 ffff88022f217e18 ffff88022f190000
[  521.255843] Call Trace:
[  521.255852]  [<ffffffff81795847>] ? dump_stack+0x40/0x50
[  521.255861]  [<ffffffff8103bd5a>] ? warn_slowpath_common+0x98/0xb0
[  521.255876]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.255885]  [<ffffffff8103bdb7>] ? warn_slowpath_fmt+0x45/0x4a
[  521.255900]  [<ffffffffa0096618>] ? i915_gem_ringbuffer_submission+0x2a9/0x86f [i915]
[  521.255916]  [<ffffffffa0095ff0>] ? i915_gem_do_execbuffer.isra.13+0xca6/0xd88 [i915]
[  521.255929]  [<ffffffffa00a138a>] ? i915_gem_pwrite_ioctl+0x75a/0x7e0 [i915]
[  521.255932]  [<ffffffff8110948a>] ? __kmalloc+0x65/0x13d
[  521.255941]  [<ffffffffa0097085>] ? i915_gem_execbuffer2+0x16e/0x205 [i915]
[  521.255947]  [<ffffffffa00047ae>] ? drm_ioctl+0x322/0x38d [drm]
[  521.255955]  [<ffffffffa0096f17>] ? i915_gem_execbuffer+0x339/0x339 [i915]
[  521.255958]  [<ffffffff811207a8>] ? dput+0x24/0x1aa
[  521.255960]  [<ffffffff8111daa6>] ? do_vfs_ioctl+0x360/0x424
[  521.255962]  [<ffffffff8104fad2>] ? task_work_run+0x84/0x96
[  521.255964]  [<ffffffff8111dbb3>] ? SyS_ioctl+0x49/0x7a
[  521.255966]  [<ffffffff8179b329>] ? int_signal+0x12/0x17
[  521.255968]  [<ffffffff8179b0f2>] ? system_call_fastpath+0x12/0x17
[  521.255969] ---[ end trace b4b0568189ffbb72 ]---
[  554.713954] usb 3-1.1: USB disconnect, device number 15
[  556.172834] usb 3-1.1: new low-speed USB device number 16 using ehci-pci
[  556.263212] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  556.263217] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  556.263220] usb 3-1.1: Product: USB Optical Mouse
[  556.263222] usb 3-1.1: Manufacturer: Logitech
[  556.265644] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.000E/input/input19
[  556.316050] hid-generic 0003:046D:C05A.000E: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  604.690826] usb 3-1.1: USB disconnect, device number 16
[  605.892705] usb 3-1.1: new low-speed USB device number 17 using ehci-pci
[  605.983164] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  605.983168] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  605.983171] usb 3-1.1: Product: USB Optical Mouse
[  605.983174] usb 3-1.1: Manufacturer: Logitech
[  605.985477] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.000F/input/input20
[  606.035886] hid-generic 0003:046D:C05A.000F: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  654.411278] usb 3-1.1: USB disconnect, device number 17
[  655.613390] usb 3-1.1: new low-speed USB device number 18 using ehci-pci
[  655.702844] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  655.702848] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  655.702851] usb 3-1.1: Product: USB Optical Mouse
[  655.702854] usb 3-1.1: Manufacturer: Logitech
[  655.705278] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0010/input/input21
[  655.755625] hid-generic 0003:046D:C05A.0010: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  704.131709] usb 3-1.1: USB disconnect, device number 18
[  705.334240] usb 3-1.1: new low-speed USB device number 19 using ehci-pci
[  705.424548] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  705.424553] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  705.424555] usb 3-1.1: Product: USB Optical Mouse
[  705.424558] usb 3-1.1: Manufacturer: Logitech
[  705.427028] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0011/input/input22
[  705.427128] hid-generic 0003:046D:C05A.0011: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0
[  753.852187] usb 3-1.1: USB disconnect, device number 19
[  755.053903] usb 3-1.1: new low-speed USB device number 20 using ehci-pci
[  755.143528] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c05a
[  755.143533] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  755.143536] usb 3-1.1: Product: USB Optical Mouse
[  755.143538] usb 3-1.1: Manufacturer: Logitech
[  755.145837] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C05A.0012/input/input23
[  755.196218] hid-generic 0003:046D:C05A.0012: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0