[ 14056.709] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 [ 14056.715] _XSERVTransOpen: transport open failed for inet6/asr:0 [ 14056.720] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 [ 14056.729] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 14056.738] X Protocol Version 11, Revision 0 [ 14056.741] Build Operating System: Linux 3.16.7 x86_64 [ 14056.744] Current Operating System: Linux asr 4.0.0-rc6-00527-gcf5d8a4 #1 SMP Sat Apr 18 18:18:38 BST 2015 x86_64 [ 14056.744] Kernel command line: BOOT_IMAGE=/boot/4.0.0-rc6-00527-gcf5d8a4 root=/dev/sda3 ro pci=nocrs [ 14056.749] Build Date: 05 March 2015 01:54:57PM [ 14056.752] [ 14056.755] Current version of pixman: 0.32.6 [ 14056.760] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 14056.760] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 14056.772] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 22 13:34:17 2015 [ 14056.775] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 14056.778] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 14056.778] (==) No Layout section. Using the first Screen section. [ 14056.778] (==) No screen section available. Using defaults. [ 14056.778] (**) |-->Screen "Default Screen Section" (0) [ 14056.778] (**) | |-->Monitor "" [ 14056.778] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 14056.778] (**) | |-->Device "Videocard0" [ 14056.778] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 14056.778] (**) Option "BlankTime" "20" [ 14056.778] (**) Option "StandbyTime" "20" [ 14056.778] (**) Option "SuspendTime" "20" [ 14056.778] (**) Option "OffTime" "20" [ 14056.778] (==) Automatically adding devices [ 14056.778] (==) Automatically enabling devices [ 14056.778] (==) Automatically adding GPU devices [ 14056.778] (==) FontPath set to: /usr/share/fonts/X11/misc/, /usr/share/fonts/X11/TTF/, /usr/share/fonts/X11/OTF/, /usr/share/fonts/X11/Type1/, /usr/share/fonts/X11/100dpi/, /usr/share/fonts/X11/75dpi/ [ 14056.778] (==) ModulePath set to "/usr/lib/xorg/modules" [ 14056.778] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 14056.778] (II) Loader magic: 0x808e00 [ 14056.778] (II) Module ABI versions: [ 14056.778] X.Org ANSI C Emulation: 0.4 [ 14056.779] X.Org Video Driver: 18.0 [ 14056.779] X.Org XInput driver : 21.0 [ 14056.779] X.Org Server Extension : 8.0 [ 14056.779] (II) xfree86: Adding drm device (/dev/dri/card0) [ 14056.781] (--) PCI:*(0:0:2:0) 8086:0f31:1849:0f31 rev 14, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f020/8 [ 14056.781] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 14056.781] (II) LoadModule: "glx" [ 14056.781] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 14056.785] (II) Module glx: vendor="X.Org Foundation" [ 14056.785] compiled for 1.16.4, module version = 1.0.0 [ 14056.785] ABI class: X.Org Server Extension, version 8.0 [ 14056.785] (==) AIGLX enabled [ 14056.785] (II) LoadModule: "intel" [ 14056.785] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 14056.785] (II) Module intel: vendor="X.Org Foundation" [ 14056.785] compiled for 1.16.4, module version = 2.99.917 [ 14056.785] Module class: X.Org Video Driver [ 14056.785] ABI class: X.Org Video Driver, version 18.0 [ 14056.785] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 14056.786] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 14056.786] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 14056.786] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 14056.786] (++) using VT number 1 [ 14056.786] (--) controlling tty is VT number 1, auto-enabling KeepTty [ 14056.786] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327 [ 14056.786] (II) intel(0): SNA compiled from 2.99.917-283-g9e46aac [ 14056.787] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics [ 14056.787] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads [ 14056.787] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 14056.787] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 14056.787] (==) intel(0): RGB weight 888 [ 14056.787] (==) intel(0): Default visual is TrueColor [ 14056.787] (**) intel(0): Option "SwapbuffersWait" "on" [ 14056.787] (**) intel(0): Option "ReprobeOutputs" "on" [ 14056.788] (II) intel(0): Output VGA1 has no monitor section [ 14056.788] (II) intel(0): Enabled output VGA1 [ 14056.788] (II) intel(0): Output HDMI1 has no monitor section [ 14056.788] (II) intel(0): Enabled output HDMI1 [ 14056.788] (II) intel(0): Output DP1 has no monitor section [ 14056.788] (II) intel(0): Enabled output DP1 [ 14056.788] (II) intel(0): Output HDMI2 has no monitor section [ 14056.788] (II) intel(0): Enabled output HDMI2 [ 14056.788] (II) intel(0): Output DP2 has no monitor section [ 14056.788] (II) intel(0): Enabled output DP2 [ 14056.788] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 14056.788] (II) intel(0): Output VIRTUAL1 has no monitor section [ 14056.788] (II) intel(0): Enabled output VIRTUAL1 [ 14056.862] (II) intel(0): EDID for output DP1 [ 14056.937] (II) intel(0): EDID for output DP2 [ 14057.013] (II) intel(0): EDID for output HDMI1 [ 14057.089] (II) intel(0): EDID for output HDMI2 [ 14057.104] (II) intel(0): EDID for output VGA1 [ 14057.104] (II) intel(0): Manufacturer: ACR Model: 124 Serial#: 16825356 [ 14057.104] (II) intel(0): Year: 2010 Week: 10 [ 14057.104] (II) intel(0): EDID Version: 1.3 [ 14057.104] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 14057.104] (II) intel(0): Sync: Separate [ 14057.104] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 29 [ 14057.104] (II) intel(0): Gamma: 2.20 [ 14057.104] (II) intel(0): DPMS capabilities: Off; RGB/Color Display [ 14057.104] (II) intel(0): First detailed timing is preferred mode [ 14057.104] (II) intel(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607 [ 14057.104] (II) intel(0): blueX: 0.151 blueY: 0.071 whiteX: 0.313 whiteY: 0.329 [ 14057.105] (II) intel(0): Supported established timings: [ 14057.105] (II) intel(0): 720x400@70Hz [ 14057.105] (II) intel(0): 640x480@60Hz [ 14057.105] (II) intel(0): 640x480@67Hz [ 14057.105] (II) intel(0): 640x480@72Hz [ 14057.105] (II) intel(0): 640x480@75Hz [ 14057.105] (II) intel(0): 800x600@56Hz [ 14057.105] (II) intel(0): 800x600@60Hz [ 14057.105] (II) intel(0): 800x600@72Hz [ 14057.105] (II) intel(0): 800x600@75Hz [ 14057.105] (II) intel(0): 832x624@75Hz [ 14057.105] (II) intel(0): 1024x768@60Hz [ 14057.105] (II) intel(0): 1024x768@70Hz [ 14057.105] (II) intel(0): 1024x768@75Hz [ 14057.105] (II) intel(0): 1280x1024@75Hz [ 14057.105] (II) intel(0): 1152x864@75Hz [ 14057.105] (II) intel(0): Manufacturer's mask: 0 [ 14057.105] (II) intel(0): Supported standard timings: [ 14057.105] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 14057.105] (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 14057.105] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 14057.105] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 14057.105] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 14057.105] (II) intel(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 14057.105] (II) intel(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 14057.105] (II) intel(0): Supported detailed timing: [ 14057.105] (II) intel(0): clock: 148.5 MHz Image Size: 521 x 293 mm [ 14057.105] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 14057.105] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 14057.105] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz [ 14057.105] (II) intel(0): Monitor name: Acer GD245HQ [ 14057.105] (II) intel(0): Serial No: LKD0W0024300 [ 14057.105] (II) intel(0): EDID (in hex): [ 14057.105] (II) intel(0): 00ffffffffffff00047224010cbc0001 [ 14057.105] (II) intel(0): 0a14010368341d782aeed5a555489b26 [ 14057.106] (II) intel(0): 125054bfef80714f810081809500950f [ 14057.106] (II) intel(0): b300d1c00101023a801871382d40582c [ 14057.106] (II) intel(0): 450009252100001e000000fd00384b1e [ 14057.106] (II) intel(0): 5311000a202020202020000000fc0041 [ 14057.106] (II) intel(0): 63657220474432343548510a000000ff [ 14057.106] (II) intel(0): 004c4b443057303032343330300a00aa [ 14057.106] (II) intel(0): Printing probed modes for output VGA1 [ 14057.106] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 14057.106] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 14057.106] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 14057.106] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 14057.106] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 14057.106] (II) intel(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 14057.106] (II) intel(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 14057.106] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 14057.106] (II) intel(0): Modeline "1024x768"x75.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 14057.106] (II) intel(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 14057.106] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 14057.106] (II) intel(0): Modeline "832x624"x75.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 14057.106] (II) intel(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 14057.106] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 14057.106] (II) intel(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 14057.106] (II) intel(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 14057.106] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 14057.106] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 14057.106] (II) intel(0): Modeline "640x480"x73.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 14057.106] (II) intel(0): Modeline "640x480"x67.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 14057.107] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 14057.107] (II) intel(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e) [ 14057.107] (II) intel(0): Modeline "720x400"x70.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 14057.107] (II) intel(0): EDID for output VIRTUAL1 [ 14057.107] (II) intel(0): Output DP1 disconnected [ 14057.107] (II) intel(0): Output DP2 disconnected [ 14057.107] (II) intel(0): Output HDMI1 disconnected [ 14057.107] (II) intel(0): Output HDMI2 disconnected [ 14057.107] (II) intel(0): Output VGA1 connected [ 14057.107] (II) intel(0): Output VIRTUAL1 disconnected [ 14057.107] (II) intel(0): Using exact sizes for initial modes [ 14057.107] (II) intel(0): Output VGA1 using initial mode 1920x1080 [ 14057.107] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 14057.107] (==) intel(0): TearFree disabled [ 14057.107] (==) intel(0): DPI set to (96, 96) [ 14057.107] (II) Loading sub module "dri2" [ 14057.107] (II) LoadModule: "dri2" [ 14057.107] (II) Module "dri2" already built-in [ 14057.107] (II) Loading sub module "present" [ 14057.107] (II) LoadModule: "present" [ 14057.107] (II) Module "present" already built-in [ 14057.107] (==) Depth 24 pixmap format is 32 bpp [ 14057.108] (II) intel(0): SNA initialized with Baytrail (gen7) backend [ 14057.108] (==) intel(0): Backing store enabled [ 14057.108] (==) intel(0): Silken mouse enabled [ 14057.108] (II) intel(0): HW Cursor enabled [ 14057.108] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 14057.108] (==) intel(0): DPMS enabled [ 14057.109] (==) intel(0): Display hotplug detection enabled [ 14057.109] (II) intel(0): [DRI2] Setup complete [ 14057.109] (II) intel(0): [DRI2] DRI driver: i965 [ 14057.109] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 14057.109] (II) intel(0): direct rendering: DRI2 enabled [ 14057.109] (II) intel(0): hardware support for Present enabled [ 14057.109] (--) RandR disabled [ 14057.206] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 14057.206] (II) AIGLX: enabled GLX_ARB_create_context [ 14057.206] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 14057.206] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 14057.206] (II) AIGLX: enabled GLX_INTEL_swap_event [ 14057.206] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 14057.206] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 14057.206] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 14057.206] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 14057.206] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 14057.206] (II) AIGLX: Loaded and initialized i965 [ 14057.206] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 14057.215] (II) intel(0): switch to mode 1920x1080@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 14057.215] (II) intel(0): Setting screen physical size to 508 x 285 [ 14057.384] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 14057.384] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 14057.384] (**) Power Button: Applying InputClass "XKB Defaults" [ 14057.384] (II) LoadModule: "evdev" [ 14057.384] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 14057.385] (II) Module evdev: vendor="X.Org Foundation" [ 14057.385] compiled for 1.16.1, module version = 2.9.0 [ 14057.385] Module class: X.Org XInput Driver [ 14057.385] ABI class: X.Org XInput driver, version 21.0 [ 14057.385] (II) Using input driver 'evdev' for 'Power Button' [ 14057.386] (**) Power Button: always reports core events [ 14057.386] (**) evdev: Power Button: Device: "/dev/input/event2" [ 14057.386] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 14057.386] (--) evdev: Power Button: Found keys [ 14057.386] (II) evdev: Power Button: Configuring as keyboard [ 14057.386] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 14057.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 14057.386] (**) Option "xkb_rules" "evdev" [ 14057.386] (**) Option "xkb_model" "pc104" [ 14057.386] (**) Option "xkb_layout" "gb" [ 14057.440] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 14057.441] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 14057.441] (**) Video Bus: Applying InputClass "XKB Defaults" [ 14057.441] (II) Using input driver 'evdev' for 'Video Bus' [ 14057.441] (**) Video Bus: always reports core events [ 14057.441] (**) evdev: Video Bus: Device: "/dev/input/event3" [ 14057.441] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 14057.441] (--) evdev: Video Bus: Found keys [ 14057.441] (II) evdev: Video Bus: Configuring as keyboard [ 14057.441] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3" [ 14057.441] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 14057.441] (**) Option "xkb_rules" "evdev" [ 14057.441] (**) Option "xkb_model" "pc104" [ 14057.441] (**) Option "xkb_layout" "gb" [ 14057.443] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 14057.443] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 14057.443] (**) Power Button: Applying InputClass "XKB Defaults" [ 14057.443] (II) Using input driver 'evdev' for 'Power Button' [ 14057.443] (**) Power Button: always reports core events [ 14057.443] (**) evdev: Power Button: Device: "/dev/input/event0" [ 14057.443] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 14057.443] (--) evdev: Power Button: Found keys [ 14057.443] (II) evdev: Power Button: Configuring as keyboard [ 14057.443] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 14057.443] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 14057.443] (**) Option "xkb_rules" "evdev" [ 14057.443] (**) Option "xkb_model" "pc104" [ 14057.443] (**) Option "xkb_layout" "gb" [ 14057.444] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 14057.444] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 14057.444] (**) Sleep Button: Applying InputClass "XKB Defaults" [ 14057.444] (II) Using input driver 'evdev' for 'Sleep Button' [ 14057.444] (**) Sleep Button: always reports core events [ 14057.444] (**) evdev: Sleep Button: Device: "/dev/input/event1" [ 14057.444] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 14057.444] (--) evdev: Sleep Button: Found keys [ 14057.444] (II) evdev: Sleep Button: Configuring as keyboard [ 14057.444] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1" [ 14057.444] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 14057.444] (**) Option "xkb_rules" "evdev" [ 14057.444] (**) Option "xkb_model" "pc104" [ 14057.444] (**) Option "xkb_layout" "gb" [ 14057.446] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8) [ 14057.446] (II) No input driver specified, ignoring this device. [ 14057.446] (II) This device may have been added with another device file. [ 14057.446] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9) [ 14057.446] (II) No input driver specified, ignoring this device. [ 14057.446] (II) This device may have been added with another device file. [ 14057.446] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event10) [ 14057.446] (II) No input driver specified, ignoring this device. [ 14057.446] (II) This device may have been added with another device file. [ 14057.447] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11) [ 14057.447] (II) No input driver specified, ignoring this device. [ 14057.447] (II) This device may have been added with another device file. [ 14057.447] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12) [ 14057.447] (II) No input driver specified, ignoring this device. [ 14057.447] (II) This device may have been added with another device file. [ 14057.448] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5) [ 14057.448] (II) No input driver specified, ignoring this device. [ 14057.448] (II) This device may have been added with another device file. [ 14057.448] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6) [ 14057.448] (II) No input driver specified, ignoring this device. [ 14057.448] (II) This device may have been added with another device file. [ 14057.448] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7) [ 14057.448] (II) No input driver specified, ignoring this device. [ 14057.448] (II) This device may have been added with another device file. [ 14057.449] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) [ 14057.449] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 14057.449] (**) AT Translated Set 2 keyboard: Applying InputClass "XKB Defaults" [ 14057.449] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 14057.449] (**) AT Translated Set 2 keyboard: always reports core events [ 14057.449] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4" [ 14057.449] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 14057.449] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 14057.449] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 14057.449] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4" [ 14057.449] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 14057.449] (**) Option "xkb_rules" "evdev" [ 14057.449] (**) Option "xkb_model" "pc104" [ 14057.449] (**) Option "xkb_layout" "gb" [ 14057.450] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event13) [ 14057.450] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall" [ 14057.450] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse' [ 14057.450] (**) ImPS/2 Generic Wheel Mouse: always reports core events [ 14057.450] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event13" [ 14057.450] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5 [ 14057.450] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons [ 14057.450] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s) [ 14057.450] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes [ 14057.450] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes [ 14057.450] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse [ 14057.450] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support [ 14057.450] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 [ 14057.450] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 14057.450] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event13" [ 14057.450] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 11) [ 14057.451] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes. [ 14057.451] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 [ 14057.451] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0 [ 14057.451] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000 [ 14057.451] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4 [ 14057.451] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0) [ 14057.451] (II) No input driver specified, ignoring this device. [ 14057.451] (II) This device may have been added with another device file.