[ 0.000000] Linux version 3.19.0-default-pciehp (root@vostro) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #2 SMP Fri Feb 20 14:36:49 CET 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19 root=/dev/sda5 ro slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 intel_idle.max_cstate=c3 i915.i915_enable_rc6=1 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da4e4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da4e5000-0x00000000da527fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da528000-0x00000000da792fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da793000-0x00000000da966fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da967000-0x00000000daa88fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daa89000-0x00000000dad67fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Vostro 3550/, BIOS A12 02/18/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdaa89 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0311b000, 0x0311bfff] PGTABLE [ 0.000000] BRK [0x0311c000, 0x0311cfff] PGTABLE [ 0.000000] BRK [0x0311d000, 0x0311dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff] [ 0.000000] [mem 0x41fc00000-0x41fdfffff] page 2M [ 0.000000] BRK [0x0311e000, 0x0311efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fbfffff] [ 0.000000] [mem 0x400000000-0x41fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff] [ 0.000000] [mem 0x3e0000000-0x3ffffffff] page 2M [ 0.000000] BRK [0x0311f000, 0x0311ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xda4e4fff] [ 0.000000] [mem 0x40200000-0xda3fffff] page 2M [ 0.000000] [mem 0xda400000-0xda4e4fff] page 4k [ 0.000000] BRK [0x03120000, 0x03120fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xda528000-0xda792fff] [ 0.000000] [mem 0xda528000-0xda792fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xda967000-0xdaa88fff] [ 0.000000] [mem 0xda967000-0xdaa88fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff] [ 0.000000] [mem 0x100000000-0x3dfffffff] page 2M [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DAFE8078 000074 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAFF1D38 0000F4 (v04 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAFE8180 009BB6 (v02 DELL WN09 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DAFE3F80 000040 [ 0.000000] ACPI: APIC 0x00000000DAFF1E30 000072 (v03 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DAFF1EA8 00003C (v01 DELL WN09 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000DAFF1EE8 0004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112) [ 0.000000] ACPI: SLIC 0x00000000DAFF2398 000176 (v01 DELL WN09 01072009 AMI 00010013) [ 0.000000] ACPI: HPET 0x00000000DAFF2510 000038 (v01 DELL WN09 01072009 AMI. 00000004) [ 0.000000] ACPI: SSDT 0x00000000DAFF2548 000846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DAFF2D90 000996 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 0x00000000DAFF3728 0000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: OSFR 0x00000000DAFF3810 000086 (v01 DELL M08 07DE0212 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xda4e4fff] [ 0.000000] node 0: [mem 0xda528000-0xda792fff] [ 0.000000] node 0: [mem 0xda967000-0xdaa88fff] [ 0.000000] node 0: [mem 0x100000000-0x41fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x41fdfffff] [ 0.000000] On node 0 totalpages: 4170254 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13906 pages used for memmap [ 0.000000] DMA32 zone: 889970 pages, LIFO batch:31 [ 0.000000] Normal zone: 51192 pages used for memmap [ 0.000000] Normal zone: 3276288 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda4e5000-0xda527fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda793000-0xda966fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaa89000-0xdad67fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdad68000-0xdafe7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdafe8000-0xdaffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041fa00000 s81664 r8192 d28928 u524288 [ 0.000000] pcpu-alloc: s81664 r8192 d28928 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4104936 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19 root=/dev/sda5 ro slub_debug=AFPZ pciehp.pciehp_debug=1 pciehp_debug=1 intel_idle.max_cstate=c3 i915.i915_enable_rc6=1 [ 0.000000] Booting kernel: `c3' invalid for parameter `intel_idle.max_cstate' [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 16292620K/16681016K available (9376K kernel code, 978K rwdata, 4216K rodata, 1056K init, 15436K bss, 388396K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8159 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2793.451 MHz processor [ 0.000056] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.90 BogoMIPS (lpj=27934510) [ 0.000202] pid_max: default: 32768 minimum: 301 [ 0.000317] ACPI: Core revision 20141107 [ 0.075125] ACPI: All ACPI Tables successfully acquired [ 0.211634] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.211711] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.212614] CPU: Physical Processor ID: 0 [ 0.212686] CPU: Processor Core ID: 0 [ 0.212759] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.212871] mce: CPU supports 7 MCE banks [ 0.212952] CPU0: Thermal monitoring enabled (TM1) [ 0.213033] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.213314] Freeing SMP alternatives memory: 32K (ffffffff821fe000 - ffffffff82206000) [ 0.213660] dmar: Host address width 36 [ 0.213732] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.213834] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.213938] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.214025] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.214128] dmar: RMRR base: 0x000000dad53000 end: 0x000000dad61fff [ 0.214209] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.214361] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.214435] HPET id 0 under DRHD base 0xfed91000 [ 0.214507] Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.214800] Enabled IRQ remapping in x2apic mode [ 0.215357] Enabling x2apic [ 0.215426] Enabled x2apic [ 0.215500] Switched APIC routing to cluster x2apic. [ 0.216182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.316380] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07) [ 0.316609] TSC deadline timer enabled [ 0.316650] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.316967] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.317078] ... version: 3 [ 0.317149] ... bit width: 48 [ 0.317219] ... generic registers: 4 [ 0.317290] ... value mask: 0000ffffffffffff [ 0.317362] ... max period: 0000ffffffffffff [ 0.317435] ... fixed-purpose events: 3 [ 0.317506] ... event mask: 000000070000000f [ 0.318640] x86: Booting SMP configuration: [ 0.318714] .... node #0, CPUs: #1 #2 #3 [ 0.358925] x86: Booted up 1 node, 4 CPUs [ 0.359065] smpboot: Total of 4 processors activated (22347.60 BogoMIPS) [ 0.362149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.362897] devtmpfs: initialized [ 0.364148] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes) [ 0.364352] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes) [ 0.365854] xor: automatically using best checksumming function: [ 0.456834] avx : 19424.000 MB/sec [ 0.456916] pinctrl core: initialized pinctrl subsystem [ 0.457429] NET: Registered protocol family 16 [ 0.486954] cpuidle: using governor ladder [ 0.516971] cpuidle: using governor menu [ 0.517210] ACPI: bus type PCI registered [ 0.517627] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.517734] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.517870] PCI: Using configuration type 1 for base access [ 0.737296] raid6: sse2x1 7475 MB/s [ 0.907524] raid6: sse2x2 9387 MB/s [ 1.077751] raid6: sse2x4 10817 MB/s [ 1.077822] raid6: using algorithm sse2x4 (10817 MB/s) [ 1.077894] raid6: using ssse3x2 recovery algorithm [ 1.078136] ACPI: Added _OSI(Module Device) [ 1.078209] ACPI: Added _OSI(Processor Device) [ 1.078281] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.078353] ACPI: Added _OSI(Processor Aggregator Device) [ 1.089594] ACPI: Executed 1 blocks of module-level executable AML code [ 1.124285] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.135566] ACPI: Dynamic OEM Table Load: [ 1.135726] ACPI: SSDT 0xFFFF88040D1340C0 00064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.139635] ACPI: Dynamic OEM Table Load: [ 1.139794] ACPI: SSDT 0xFFFF88040CD42D08 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.143153] ACPI: Dynamic OEM Table Load: [ 1.143310] ACPI: SSDT 0xFFFF88040CE39920 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.150395] ACPI: Interpreter enabled [ 1.150492] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 1.150736] ACPI: (supports S0 S1 S3 S4 S5) [ 1.150809] ACPI: Using IOAPIC for interrupt routing [ 1.151057] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.264927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.265018] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.267103] acpi PNP0A08:00: _OSC: platform does not support [PME] [ 1.269057] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 1.275310] PCI host bridge to bus 0000:00 [ 1.275387] pci_bus 0000:00: root bus resource [bus 00-3e] [ 1.275463] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.275538] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.275614] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.275691] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 1.275769] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 1.275846] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 1.275924] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 1.276002] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 1.276079] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 1.276156] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 1.276233] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 1.276317] pci_bus 0000:00: scanning bus [ 1.276344] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 1.276351] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 [ 1.277033] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 1.277049] pci 0000:00:02.0: reg 0x10: [mem 0xf6800000-0xf6bfffff 64bit] [ 1.277057] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.277063] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 1.277807] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 1.277846] pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit] [ 1.277993] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.278018] pci 0000:00:16.0: PME# disabled [ 1.278662] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 1.278697] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff] [ 1.278867] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.278872] pci 0000:00:1a.0: PME# disabled [ 1.285852] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1.286181] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 1.286214] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit] [ 1.286385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.286390] pci 0000:00:1b.0: PME# disabled [ 1.286830] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 1.287147] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 1.287243] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.287329] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.287334] pci 0000:00:1c.0: PME# disabled [ 1.287384] pci 0000:00:1c.0: Disabling UPDCR peer decodes [ 1.287465] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.287539] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.288039] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.288368] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 1.288462] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.288547] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.288553] pci 0000:00:1c.1: PME# disabled [ 1.288595] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 1.288669] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 1.289176] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 1.289512] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 1.289606] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.289689] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.289695] pci 0000:00:1c.3: PME# disabled [ 1.289735] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 1.289809] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 1.290310] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 1.290636] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 1.290729] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.290811] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.290816] pci 0000:00:1c.4: PME# disabled [ 1.290857] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 1.290931] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 1.291428] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 1.291753] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 1.291845] pci 0000:00:1c.7: calling pci_fixup_transparent_bridge+0x0/0x30 [ 1.291927] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.291933] pci 0000:00:1c.7: PME# disabled [ 1.291972] pci 0000:00:1c.7: Enabling MPC IRBNCE [ 1.292046] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled [ 1.292552] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 1.292879] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 1.292916] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff] [ 1.293088] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.293094] pci 0000:00:1d.0: PME# disabled [ 1.299839] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.300168] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 1.300956] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 1.300995] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 1.301009] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 1.301024] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 1.301039] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 1.301054] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 1.301069] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff] [ 1.301187] pci 0000:00:1f.2: PME# supported from D3hot [ 1.301192] pci 0000:00:1f.2: PME# disabled [ 1.301826] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 1.301857] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit] [ 1.301898] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 1.302522] pci_bus 0000:00: fixups for bus [ 1.302528] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 0 [ 1.302739] pci_bus 0000:03: scanning bus [ 1.302744] pci_bus 0000:03: fixups for bus [ 1.302747] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 1.302838] pci_bus 0000:03: bus scan returning with max=03 [ 1.302845] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 0 [ 1.303045] pci_bus 0000:05: scanning bus [ 1.303091] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 1.303123] pci 0000:05:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 1.303171] pci 0000:05:00.0: reg 0x18: [mem 0xf1104000-0xf1104fff 64bit pref] [ 1.303200] pci 0000:05:00.0: reg 0x20: [mem 0xf1100000-0xf1103fff 64bit pref] [ 1.303387] pci 0000:05:00.0: supports D1 D2 [ 1.303389] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.303396] pci 0000:05:00.0: PME# disabled [ 1.303516] pci 0000:05:00.0: System wakeup disabled by ACPI [ 1.319414] pci_bus 0000:05: fixups for bus [ 1.319416] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 1.319495] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 1.319508] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 1.319510] pci_bus 0000:05: bus scan returning with max=05 [ 1.319516] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 0 [ 1.319723] pci_bus 0000:09: scanning bus [ 1.320036] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000 [ 1.320404] pci 0000:09:00.0: reg 0x10: [mem 0xf7e00000-0xf7e01fff 64bit] [ 1.322097] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 1.322148] pci 0000:09:00.0: PME# disabled [ 1.322475] pci 0000:09:00.0: System wakeup disabled by ACPI [ 1.339570] pci_bus 0000:09: fixups for bus [ 1.339572] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 1.339655] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff] [ 1.339664] pci_bus 0000:09: bus scan returning with max=09 [ 1.339670] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 0 [ 1.339869] pci_bus 0000:0b: scanning bus [ 1.339912] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330 [ 1.339951] pci 0000:0b:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit] [ 1.339979] pci 0000:0b:00.0: reg 0x18: [mem 0xf7d10000-0xf7d11fff 64bit] [ 1.340175] pci 0000:0b:00.0: supports D1 D2 [ 1.340177] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.340183] pci 0000:0b:00.0: PME# disabled [ 1.340307] pci 0000:0b:00.0: System wakeup disabled by ACPI [ 1.340659] pci_bus 0000:0b: fixups for bus [ 1.340661] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c] [ 1.340741] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 1.340751] pci_bus 0000:0b: bus scan returning with max=0b [ 1.340756] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 0 [ 1.340952] pci_bus 0000:11: scanning bus [ 1.340997] pci 0000:11:00.0: [1095:3132] type 00 class 0x018000 [ 1.341044] pci 0000:11:00.0: reg 0x10: [mem 0xf6c84000-0xf6c8407f 64bit] [ 1.341077] pci 0000:11:00.0: reg 0x18: [mem 0xf6c80000-0xf6c83fff 64bit] [ 1.341098] pci 0000:11:00.0: reg 0x20: [io 0xc000-0xc07f] [ 1.341139] pci 0000:11:00.0: reg 0x30: [mem 0xf6c00000-0xf6c7ffff pref] [ 1.341295] pci 0000:11:00.0: supports D1 D2 [ 1.341542] pci 0000:11:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.341665] pci_bus 0000:11: fixups for bus [ 1.341667] pci 0000:00:1c.7: PCI bridge to [bus 11-16] [ 1.341745] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 1.341750] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 1.341759] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 1.341761] pci_bus 0000:11: bus scan returning with max=11 [ 1.341767] pci 0000:00:1c.0: scanning [bus 03-04] behind bridge, pass 1 [ 1.341778] pci 0000:00:1c.1: scanning [bus 05-06] behind bridge, pass 1 [ 1.341789] pci 0000:00:1c.3: scanning [bus 09-0a] behind bridge, pass 1 [ 1.341800] pci 0000:00:1c.4: scanning [bus 0b-0c] behind bridge, pass 1 [ 1.341810] pci 0000:00:1c.7: scanning [bus 11-16] behind bridge, pass 1 [ 1.341819] pci_bus 0000:00: bus scan returning with max=16 [ 1.341847] pci_bus 0000:00: on NUMA node 0 [ 1.345497] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.346525] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.347540] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.348551] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.349568] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.350681] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.351793] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.352794] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.354849] ACPI: Enabled 4 GPEs in block 00 to 3F [ 1.355575] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.355655] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.355765] vgaarb: loaded [ 1.355833] vgaarb: bridge control possible 0000:00:02.0 [ 1.356479] SCSI subsystem initialized [ 1.356696] libata version 3.00 loaded. [ 1.356904] ACPI: bus type USB registered [ 1.357146] usbcore: registered new interface driver usbfs [ 1.357303] usbcore: registered new interface driver hub [ 1.357430] usbcore: registered new device driver usb [ 1.357662] media: Linux media interface: v0.10 [ 1.357811] Linux video capture interface: v2.00 [ 1.358092] EDAC MC: Ver: 3.0.0 [ 1.359502] wmi: Mapper loaded [ 1.359749] Advanced Linux Sound Architecture Driver Initialized. [ 1.359833] PCI: Using ACPI for IRQ routing [ 1.362008] PCI: pci_cache_line_size set to 64 bytes [ 1.362016] pci 0000:00:02.0: BAR 0: reserving [mem 0xf6800000-0xf6bfffff flags 0x140204] (d=0, p=0) [ 1.362018] pci 0000:00:02.0: BAR 2: reserving [mem 0xe0000000-0xefffffff flags 0x14220c] (d=0, p=0) [ 1.362021] pci 0000:00:02.0: BAR 4: reserving [io 0xf000-0xf03f flags 0x40101] (d=0, p=0) [ 1.362025] pci 0000:00:16.0: BAR 0: reserving [mem 0xf7f0a000-0xf7f0a00f flags 0x140204] (d=0, p=0) [ 1.362029] pci 0000:00:1a.0: BAR 0: reserving [mem 0xf7f08000-0xf7f083ff flags 0x40200] (d=0, p=0) [ 1.362034] pci 0000:00:1b.0: BAR 0: reserving [mem 0xf7f00000-0xf7f03fff flags 0x140204] (d=0, p=0) [ 1.362043] pci 0000:05:00.0: BAR 0: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0) [ 1.362045] pci 0000:05:00.0: BAR 2: reserving [mem 0xf1104000-0xf1104fff flags 0x14220c] (d=0, p=0) [ 1.362047] pci 0000:05:00.0: BAR 4: reserving [mem 0xf1100000-0xf1103fff flags 0x14220c] (d=0, p=0) [ 1.362055] pci 0000:09:00.0: BAR 0: reserving [mem 0xf7e00000-0xf7e01fff flags 0x140204] (d=0, p=0) [ 1.362061] pci 0000:0b:00.0: BAR 0: reserving [mem 0xf7d00000-0xf7d0ffff flags 0x140204] (d=0, p=0) [ 1.362063] pci 0000:0b:00.0: BAR 2: reserving [mem 0xf7d10000-0xf7d11fff flags 0x140204] (d=0, p=0) [ 1.362070] pci 0000:11:00.0: BAR 0: reserving [mem 0xf6c84000-0xf6c8407f flags 0x140204] (d=0, p=0) [ 1.362072] pci 0000:11:00.0: BAR 2: reserving [mem 0xf6c80000-0xf6c83fff flags 0x140204] (d=0, p=0) [ 1.362074] pci 0000:11:00.0: BAR 4: reserving [io 0xc000-0xc07f flags 0x40101] (d=0, p=0) [ 1.362079] pci 0000:00:1d.0: BAR 0: reserving [mem 0xf7f07000-0xf7f073ff flags 0x40200] (d=0, p=0) [ 1.362085] pci 0000:00:1f.2: BAR 0: reserving [io 0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0) [ 1.362087] pci 0000:00:1f.2: BAR 1: reserving [io 0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0) [ 1.362090] pci 0000:00:1f.2: BAR 2: reserving [io 0xf090-0xf097 flags 0x40101] (d=0, p=0) [ 1.362093] pci 0000:00:1f.2: BAR 3: reserving [io 0xf080-0xf083 flags 0x40101] (d=0, p=0) [ 1.362097] pci 0000:00:1f.2: BAR 4: reserving [io 0xf060-0xf07f flags 0x40101] (d=0, p=0) [ 1.362101] pci 0000:00:1f.2: BAR 5: reserving [mem 0xf7f06000-0xf7f067ff flags 0x40200] (d=0, p=0) [ 1.362107] pci 0000:00:1f.3: BAR 0: reserving [mem 0xf7f05000-0xf7f050ff flags 0x140204] (d=0, p=0) [ 1.362111] pci 0000:00:1f.3: BAR 4: reserving [io 0xf040-0xf05f flags 0x40101] (d=0, p=0) [ 1.362157] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 1.362166] e820: reserve RAM buffer [mem 0xda4e5000-0xdbffffff] [ 1.362170] e820: reserve RAM buffer [mem 0xda793000-0xdbffffff] [ 1.362174] e820: reserve RAM buffer [mem 0xdaa89000-0xdbffffff] [ 1.362178] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff] [ 1.362987] Bluetooth: Core ver 2.20 [ 1.363092] NET: Registered protocol family 31 [ 1.363168] Bluetooth: HCI device and connection manager initialized [ 1.363259] Bluetooth: HCI socket layer initialized [ 1.363336] Bluetooth: L2CAP socket layer initialized [ 1.363431] Bluetooth: SCO socket layer initialized [ 1.364075] cfg80211: Calling CRDA to update world regulatory domain [ 1.364329] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.364758] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.366900] Switched to clocksource hpet [ 1.400820] pnp: PnP ACPI init [ 1.401492] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.401573] system 00:00: [io 0x1000-0x100f] has been reserved [ 1.401654] system 00:00: [io 0xffff] has been reserved [ 1.401731] system 00:00: [io 0xffff] has been reserved [ 1.401812] system 00:00: [io 0x0400-0x0453] could not be reserved [ 1.401889] system 00:00: [io 0x0458-0x047f] has been reserved [ 1.401969] system 00:00: [io 0x0500-0x057f] has been reserved [ 1.402048] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.402141] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.402339] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.402695] system 00:02: [io 0x0454-0x0457] has been reserved [ 1.402774] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.403060] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.403143] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved [ 1.403221] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.403438] pnp 00:04: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active) [ 1.403655] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.405450] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.405534] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.405614] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.405693] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.405773] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.405853] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.405935] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.406015] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.406094] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 1.406176] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.406256] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 1.406334] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.407683] system 00:07: [mem 0x20000000-0x201fffff] has been reserved [ 1.407766] system 00:07: [mem 0x40000000-0x401fffff] has been reserved [ 1.407844] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.408116] pnp: PnP ACPI: found 8 devices [ 1.423417] pci 0000:00:1c.0: PCI bridge to [bus 03-04] [ 1.423512] pci 0000:00:1c.1: PCI bridge to [bus 05-06] [ 1.423587] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 1.424155] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref] [ 1.424266] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 1.424344] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff] [ 1.424432] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c] [ 1.424512] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 1.424599] pci 0000:00:1c.7: PCI bridge to [bus 11-16] [ 1.424675] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff] [ 1.424756] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff] [ 1.424836] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref] [ 1.424947] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.424949] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.424950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.424952] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 1.424953] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 1.424955] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 1.424956] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 1.424958] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 1.424960] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 1.424961] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 1.424963] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff] [ 1.424965] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 1.424966] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref] [ 1.424968] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff] [ 1.424970] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 1.424972] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff] [ 1.424973] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff] [ 1.424975] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref] [ 1.425051] NET: Registered protocol family 2 [ 1.425547] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.425834] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 1.429349] TCP: Hash tables configured (established 131072 bind 65536) [ 1.429488] TCP: reno registered [ 1.429587] UDP hash table entries: 8192 (order: 8, 1310720 bytes) [ 1.430512] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes) [ 1.431628] NET: Registered protocol family 1 [ 1.432011] RPC: Registered named UNIX socket transport module. [ 1.432086] RPC: Registered udp transport module. [ 1.432159] RPC: Registered tcp transport module. [ 1.432231] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.432322] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe0 [ 1.432325] pci 0000:00:02.0: Video device with shadowed ROM [ 1.432333] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x730 [ 1.557969] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x730 [ 1.677958] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x730 [ 1.678866] PCI: CLS mismatch (64 != 32), using 64 bytes [ 1.679129] DMAR: No ATSR found [ 1.679388] IOMMU: dmar0 using Queued invalidation [ 1.679461] IOMMU: dmar1 using Queued invalidation [ 1.679538] IOMMU: Setting RMRR: [ 1.679684] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff] [ 1.680167] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff] [ 1.680312] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff] [ 1.680428] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 1.680546] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 1.680941] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 1.686240] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 1.686617] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 1.686711] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b [ 1.686805] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b [ 1.686900] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b [ 1.687185] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.690851] AVX version of gcm_enc/dec engaged. [ 1.690924] AES CTR mode by8 optimization enabled [ 1.692002] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 1.692202] sha256_ssse3: Using AVX optimized SHA-256 implementation [ 1.692393] sha512_ssse3: Using AVX optimized SHA-512 implementation [ 1.696673] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 1.696866] audit: initializing netlink subsys (disabled) [ 1.696986] audit: type=2000 audit(1431194913.550:1): initialized [ 1.698276] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.719335] zpool: loaded [ 1.730797] NET: Registered protocol family 38 [ 1.730912] Key type asymmetric registered [ 1.730995] Asymmetric key parser 'x509' registered [ 1.731287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.731413] io scheduler noop registered [ 1.731488] io scheduler deadline registered (default) [ 1.731902] io scheduler cfq registered [ 1.731987] start plist test [ 1.733990] end plist test [ 1.737366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.737739] pciehp 0000:00:1c.7:pcie04: Hotplug Controller: [ 1.737817] pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 26 [ 1.737921] pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086 [ 1.737997] pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e [ 1.738073] pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3 [ 1.738149] pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028 [ 1.738224] pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40 [ 1.738301] pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff] [ 1.738404] pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff] [ 1.738509] pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit pref] [ 1.738614] pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260 [ 1.738691] pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7 [ 1.738765] pciehp 0000:00:1c.7:pcie04: Attention Button : no [ 1.738841] pciehp 0000:00:1c.7:pcie04: Power Controller : no [ 1.738916] pciehp 0000:00:1c.7:pcie04: MRL Sensor : no [ 1.738991] pciehp 0000:00:1c.7:pcie04: Attention Indicator : no [ 1.739066] pciehp 0000:00:1c.7:pcie04: Power Indicator : no [ 1.739142] pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes [ 1.739216] pciehp 0000:00:1c.7:pcie04: EMI Present : no [ 1.739292] pciehp 0000:00:1c.7:pcie04: Command Completed : no [ 1.739369] pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0040 [ 1.739447] pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000 [ 1.739524] pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported [ 1.739529] pciehp 0000:00:1c.7:pcie04: Slot #7 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ [ 1.739669] pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7 [ 1.739750] pci_bus 0000:11: dev 00, created physical slot 7 [ 1.739891] pciehp 0000:00:1c.7:pcie04: pcie_enable_notification: SLOTCTRL 58 write cmd 1038 [ 1.739899] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 1028 [ 1.739901] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded [ 1.739928] pciehp: pcie_port_service_register = 0 [ 1.739930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.740104] intel_idle: MWAIT substates: 0x21120 [ 1.740106] intel_idle: v0.4 model 0x2A [ 1.740108] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.742087] ACPI: AC Adapter [AC] (on-line) [ 1.742504] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.744345] ACPI: Lid Switch [LID0] [ 1.744643] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.744788] ACPI: Power Button [PWRB] [ 1.745131] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.745250] ACPI: Sleep Button [SBTN] [ 1.745578] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.745694] ACPI: Power Button [PWRF] [ 1.775561] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.775638] ACPI: Thermal Zone [THM] (59 C) [ 1.775926] GHES: HEST is not enabled! [ 1.776012] ERST DBG: ERST support is disabled. [ 1.811907] ACPI: Battery Slot [BAT0] (battery present) [ 1.845160] Non-volatile memory driver v1.3 [ 1.852323] Linux agpgart interface v0.103 [ 1.852468] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.852643] [drm] Initialized drm 1.1.0 20060810 [ 1.857070] [drm] Memory usable by graphics device = 2048M [ 1.857146] [drm] VT-d active for gfx access [ 1.857217] [drm] Disabling PPGTT because VT-d is on [ 1.857312] [drm] Replacing VGA console driver [ 1.857992] Console: switching to colour dummy device 80x25 [ 1.918313] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.918319] [drm] Driver supports precise vblank timestamp query. [ 1.918399] [drm] DMAR active, disabling use of stolen memory [ 1.918737] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.947527] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.950628] acpi device:34: registered as cooling_device4 [ 1.951205] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.951300] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 1.956915] loop: module loaded [ 1.968240] Guest personality initialized and is inactive [ 1.968398] VMCI host device registered (name=vmci, major=10, minor=61) [ 1.968404] Initialized host personality [ 1.968495] usbcore: registered new interface driver rtsx_usb [ 1.968717] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258) [ 1.968735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.968746] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 1.968755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.968760] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 1.968767] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.968772] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 1.968780] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.968783] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.969377] ahci 0000:00:1f.2: version 3.0 [ 1.970054] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.987710] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 1.987721] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 2.032907] scsi host0: ahci [ 2.033874] scsi host1: ahci [ 2.034395] scsi host2: ahci [ 2.034838] scsi host3: ahci [ 2.035254] scsi host4: ahci [ 2.035669] scsi host5: ahci [ 2.035982] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 29 [ 2.035986] ata2: DUMMY [ 2.035987] ata3: DUMMY [ 2.035989] ata4: DUMMY [ 2.035992] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 29 [ 2.035996] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 29 [ 2.036343] tun: Universal TUN/TAP device driver, 1.6 [ 2.036346] tun: (C) 1999-2004 Max Krasnyansky [ 2.036598] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.036930] r8169 0000:05:00.0: enabling Mem-Wr-Inval [ 2.037805] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000030000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 30 [ 2.037810] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.037904] VMware vmxnet3 virtual NIC driver - version 1.2.1.0-k-NAPI [ 2.038332] xhci_hcd 0000:0b:00.0: enabling bus mastering [ 2.038366] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 2.038484] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 1 [ 2.038815] xhci_hcd 0000:0b:00.0: enabling Mem-Wr-Inval [ 2.039560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.039564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.039568] usb usb1: Product: xHCI Host Controller [ 2.039571] usb usb1: Manufacturer: Linux 3.19.0-default-pciehp xhci-hcd [ 2.039574] usb usb1: SerialNumber: 0000:0b:00.0 [ 2.040437] hub 1-0:1.0: USB hub found [ 2.040495] hub 1-0:1.0: 2 ports detected [ 2.041384] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 2.041398] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 2 [ 2.041658] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.041662] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.041666] usb usb2: Product: xHCI Host Controller [ 2.041668] usb usb2: Manufacturer: Linux 3.19.0-default-pciehp xhci-hcd [ 2.041671] usb usb2: SerialNumber: 0000:0b:00.0 [ 2.042423] hub 2-0:1.0: USB hub found [ 2.042479] hub 2-0:1.0: 2 ports detected [ 2.043191] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.043207] ehci-pci: EHCI PCI platform driver [ 2.043831] ehci-pci 0000:00:1a.0: enabling bus mastering [ 2.043854] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.043876] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.043901] ehci-pci 0000:00:1a.0: debug port 2 [ 2.047839] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.047883] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f08000 [ 2.054773] fbcon: inteldrmfb (fb0) is primary device [ 2.067916] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.068136] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.068137] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.068138] usb usb3: Product: EHCI Host Controller [ 2.068140] usb usb3: Manufacturer: Linux 3.19.0-default-pciehp ehci_hcd [ 2.068141] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.068922] hub 3-0:1.0: USB hub found [ 2.068956] hub 3-0:1.0: 2 ports detected [ 2.070319] ehci-pci 0000:00:1d.0: enabling bus mastering [ 2.070335] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.070353] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 2.070376] ehci-pci 0000:00:1d.0: debug port 2 [ 2.074301] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.074346] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000 [ 2.087985] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.088168] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.088169] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.088170] usb usb4: Product: EHCI Host Controller [ 2.088171] usb usb4: Manufacturer: Linux 3.19.0-default-pciehp ehci_hcd [ 2.088172] usb usb4: SerialNumber: 0000:00:1d.0 [ 2.088870] hub 4-0:1.0: USB hub found [ 2.088899] hub 4-0:1.0: 2 ports detected [ 2.089748] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12 [ 2.092483] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.092537] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.093343] mousedev: PS/2 mouse device common for all mice [ 2.094947] rtc_cmos 00:01: RTC can wake from S4 [ 2.095116] rtc (null): alarm rollover: day [ 2.095364] rtc rtc0: rtc_cmos: dev (254:0) [ 2.095381] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.095420] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.095509] i2c /dev entries driver [ 2.097620] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258) [ 2.097622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.098263] coretemp coretemp.0: TjMax is 100 degrees C [ 2.098302] coretemp coretemp.0: TjMax is 100 degrees C [ 2.098349] coretemp coretemp.0: TjMax is 100 degrees C [ 2.099016] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.099092] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 2.099763] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.099810] iTCO_vendor_support: vendor-support=0 [ 2.099820] md: linear personality registered for level -1 [ 2.099839] md: raid0 personality registered for level 0 [ 2.099848] md: raid1 personality registered for level 1 [ 2.099857] md: raid10 personality registered for level 10 [ 2.100065] md: raid6 personality registered for level 6 [ 2.100066] md: raid5 personality registered for level 5 [ 2.100066] md: raid4 personality registered for level 4 [ 2.100602] device-mapper: uevent: version 1.0.3 [ 2.101141] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 2.101806] Intel P-state driver initializing. [ 2.104290] hidraw: raw HID events driver (C) Jiri Kosina [ 2.104899] usbcore: registered new interface driver usbhid [ 2.104900] usbhid: USB HID core driver [ 2.105234] input: Dell WMI hotkeys as /devices/virtual/input/input6 [ 2.105477] dell_wmi_aio: No known WMI GUID found [ 2.106823] TCP: cubic registered [ 2.106831] NET: Registered protocol family 17 [ 2.107236] Bluetooth: RFCOMM TTY layer initialized [ 2.107242] Bluetooth: RFCOMM socket layer initialized [ 2.107250] Bluetooth: RFCOMM ver 1.11 [ 2.107259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.107259] Bluetooth: BNEP filters: protocol multicast [ 2.107283] Bluetooth: BNEP socket layer initialized [ 2.107287] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.107291] Bluetooth: HIDP socket layer initialized [ 2.107360] Key type dns_resolver registered [ 2.108723] registered taskstats version 1 [ 2.109941] rtc_cmos 00:01: setting system clock to 2015-05-09 18:08:34 UTC (1431194914) [ 2.109948] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.109949] EDD information not available. [ 2.110548] PM: Checking hibernation image partition /dev/sda6 [ 2.110986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.129516] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 2.129518] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.129519] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 2.129519] sound hdaudioC0D0: mono: mono_out=0x0 [ 2.129520] sound hdaudioC0D0: inputs: [ 2.129521] sound hdaudioC0D0: Internal Mic=0x11 [ 2.129522] sound hdaudioC0D0: Mic=0xa [ 2.171162] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9 [ 2.172588] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 2.172890] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 2.173219] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 2.358589] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.378260] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.387996] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.388107] ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BC10001, max UDMA/133 [ 2.388108] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.388741] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.397969] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.398084] ata1.00: configured for UDMA/133 [ 2.398466] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.413247] usb 2-1: New USB device found, idVendor=2109, idProduct=0811 [ 2.413253] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.413257] usb 2-1: Product: 4-Port USB 3.0 Hub [ 2.413260] usb 2-1: Manufacturer: VIA Labs, Inc. [ 2.418396] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 2.426625] hub 2-1:1.0: USB hub found [ 2.427072] hub 2-1:1.0: 4 ports detected [ 2.501092] usb 1-1: New USB device found, idVendor=2109, idProduct=0811 [ 2.501094] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.501095] usb 1-1: Product: USB2.0 Hub [ 2.522971] hub 1-1:1.0: USB hub found [ 2.523494] hub 1-1:1.0: 4 ports detected [ 2.549502] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.549503] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.549609] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd [ 2.550342] hub 3-1:1.0: USB hub found [ 2.550602] hub 3-1:1.0: 6 ports detected [ 2.569169] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.569174] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.570107] hub 4-1:1.0: USB hub found [ 2.570309] hub 4-1:1.0: 8 ports detected [ 2.648699] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 2.678766] tsc: Refined TSC clocksource calibration: 2793.653 MHz [ 2.791310] usb 1-2: New USB device found, idVendor=2109, idProduct=3431 [ 2.791312] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.791313] usb 1-2: Product: USB2.0 Hub [ 2.811219] hub 1-2:1.0: USB hub found [ 2.811713] hub 1-2:1.0: 4 ports detected [ 2.829199] usb 3-1.5: new high-speed USB device number 3 using ehci-pci [ 2.849241] usb 4-1.2: new low-speed USB device number 3 using ehci-pci [ 2.869272] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd [ 2.875469] usb 2-2: New USB device found, idVendor=2109, idProduct=0810 [ 2.875470] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.875471] usb 2-2: Product: 4-Port USB 3.0 Hub [ 2.875472] usb 2-2: Manufacturer: VIA Labs, Inc. [ 2.912106] hub 2-2:1.0: USB hub found [ 2.947642] usb 3-1.5: New USB device found, idVendor=05ca, idProduct=1820 [ 2.947644] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.947645] usb 3-1.5: Product: Laptop_Integrated_Webcam_FHD [ 2.947646] usb 3-1.5: Manufacturer: CN01MWM9724871A4KB28A00 [ 2.966426] hub 2-2:1.0: 4 ports detected [ 2.966526] usb 4-1.2: New USB device found, idVendor=046d, idProduct=c050 [ 2.966527] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.966528] usb 4-1.2: Product: USB-PS/2 Optical Mouse [ 2.966529] usb 4-1.2: Manufacturer: Logitech [ 2.972005] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:046D:C050.0001/input/input14 [ 2.972818] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0 [ 2.981777] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=0116 [ 2.981779] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.981780] usb 1-1.4: Product: USB Keyboard [ 2.981781] usb 1-1.4: Manufacturer: CHICONY [ 2.982204] usb 1-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.986629] Console: switching to colour frame buffer device 170x48 [ 3.010735] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04F2:0116.0002/input/input15 [ 3.049202] usb 4-1.3: new full-speed USB device number 4 using ehci-pci [ 3.069560] hid-generic 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:0b:00.0-1.4/input0 [ 3.096744] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.097682] i915 0000:00:02.0: registered panic notifier [ 3.129751] scsi 0:0:0:0: Direct-Access ATA ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5 [ 3.131637] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.132050] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.133669] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.134902] sd 0:0:0:0: [sda] Write Protect is off [ 3.135853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.135896] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.161690] usb 4-1.3: New USB device found, idVendor=138a, idProduct=0011 [ 3.162686] usb 4-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.163653] usb 4-1.3: SerialNumber: 56ed5821afe2 [ 3.209779] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.213146] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.299004] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input13 [ 3.314557] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 3.489677] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.494214] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100 [ 3.505970] ata5.00: configured for UDMA/100 [ 3.526560] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5 [ 3.565893] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.566896] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.568709] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.569088] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 3.680228] Switched to clocksource tsc [ 3.920212] ata6: SATA link down (SStatus 0 SControl 300) [ 3.921286] PM: Hibernation image partition 8:6 present [ 3.921287] PM: Looking for hibernation image. [ 3.921792] PM: Image not found (code -22) [ 3.921794] PM: Hibernation image not present or could not be loaded. [ 3.921817] ALSA device list: [ 3.922811] #0: HDA Intel PCH at 0xf7f00000 irq 36 [ 3.924024] md: Waiting for all devices to be available before autodetect [ 3.925050] md: If you don't use raid, use raid=noautodetect [ 3.927060] md: Autodetecting RAID arrays. [ 3.928091] md: Scanned 0 and added 0 devices. [ 3.929115] md: autorun ... [ 3.930160] md: ... autorun DONE. [ 3.958676] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240) [ 4.129810] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.130891] VFS: Mounted root (ext4 filesystem) readonly on device 8:5. [ 4.166607] devtmpfs: mounted [ 4.167970] Freeing unused kernel memory: 1056K (ffffffff820f6000 - ffffffff821fe000) [ 4.169002] Write protecting the kernel read-only data: 16384k [ 4.170840] Freeing unused kernel memory: 852K (ffff88000192b000 - ffff880001a00000) [ 4.172388] Freeing unused kernel memory: 1928K (ffff880001e1e000 - ffff880002000000) [ 6.522405] random: systemd-udevd urandom read with 120 bits of entropy available [ 6.974304] random: nonblocking pool is initialized [ 7.343911] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 7.614563] sata_sil24 0000:11:00.0: version 1.1 [ 7.617123] scsi host6: sata_sil24 [ 7.617654] scsi host7: sata_sil24 [ 7.618060] ata7: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c80000 irq 19 [ 7.618065] ata8: SATA max UDMA/100 host m128@0xf6c84000 port 0xf6c82000 irq 19 [ 7.805896] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 7.805899] Copyright(c) 2003- 2014 Intel Corporation [ 7.896518] iwlwifi 0000:09:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 8.125297] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820) [ 8.127959] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input16 [ 8.128423] usbcore: registered new interface driver uvcvideo [ 8.128425] USB Video Class driver (1.1.1) [ 8.518953] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 8.518956] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 8.518957] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 8.518959] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0 [ 8.519155] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 8.526084] iwlwifi 0000:09:00.0: RF_KILL bit toggled to disable radio. [ 8.538189] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 8.556907] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0 [ 9.487274] usb 4-1.6: new high-speed USB device number 5 using ehci-pci [ 9.610971] usb 4-1.6: New USB device found, idVendor=0bda, idProduct=0138 [ 9.610974] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.610976] usb 4-1.6: Product: USB2.0-CRW [ 9.610977] usb 4-1.6: Manufacturer: Generic [ 9.610979] usb 4-1.6: SerialNumber: 20090516388200000 [ 9.706257] usbcore: registered new interface driver usb-storage [ 9.707351] ata7: SATA link down (SStatus 0 SControl 0) [ 9.731837] usbcore: registered new interface driver uas [ 9.734102] ums-realtek 4-1.6:1.0: USB Mass Storage device detected [ 9.751905] scsi host8: usb-storage 4-1.6:1.0 [ 9.752306] usbcore: registered new interface driver ums-realtek [ 10.752443] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 10.754254] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 11.436916] sd 8:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 11.438087] sd 8:0:0:0: [sdb] Write Protect is off [ 11.438099] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 11.439196] sd 8:0:0:0: [sdb] No Caching mode page found [ 11.439203] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 11.444549] sdb: sdb1 [ 11.447897] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 11.799993] ata8: SATA link down (SStatus 0 SControl 0) [ 12.604817] EXT4-fs (sda5): re-mounted. Opts: (null) [ 12.839320] Adding 16776188k swap on /dev/sda6. Priority:-1 extents:1 across:16776188k FS [ 13.455394] fuse init (API version 7.23) [ 16.559416] r8169 0000:05:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2 [ 16.559424] r8169 0000:05:00.0 enp5s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) [ 16.589824] r8169 0000:05:00.0 enp5s0: link down [ 16.589902] r8169 0000:05:00.0 enp5s0: link down [ 18.288960] r8169 0000:05:00.0 enp5s0: link up [ 21.615748] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b [ 21.616200] microcode: CPU0 updated to revision 0x29, date = 2013-06-12 [ 21.616506] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b [ 21.616747] microcode: CPU1 updated to revision 0x29, date = 2013-06-12 [ 21.617211] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b [ 21.617490] microcode: CPU2 updated to revision 0x29, date = 2013-06-12 [ 21.617837] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b [ 21.618118] microcode: CPU3 updated to revision 0x29, date = 2013-06-12 [ 21.618126] perf_event_intel: PEBS enabled due to microcode update [ 27.620681] pbs_mom (3489): /proc/3489/oom_adj is deprecated, please use /proc/3489/oom_score_adj instead. [ 28.871234] intel_pstate CPU 2 exiting [ 28.932835] smpboot: CPU 2 is now offline [ 29.081293] intel_pstate CPU 3 exiting [ 29.122793] smpboot: CPU 3 is now offline [ 1016.894700] plugin-containe[26232]: segfault at 8 ip 00007fb9c59c9b20 sp 00007fff3f897eb0 error 4 in libxul.so[7fb9c1e08000+5bbd000] [ 1017.110407] plugin-containe[26234]: segfault at 8 ip 00007fb01a95db20 sp 00007fff03664c20 error 4 in libxul.so[7fb016d9c000+5bbd000] [ 1017.821186] plugin-containe[26236]: segfault at 8 ip 00007f810ceadb20 sp 00007fff79ffd7e0 error 4 in libxul.so[7f81092ec000+5bbd000] [ 1030.159271] plugin-containe[26244]: segfault at 8 ip 00007f066e2fcb20 sp 00007fff424c9c00 error 4 in libxul.so[7f066a73b000+5bbd000] [ 1030.264596] plugin-containe[26246]: segfault at 8 ip 00007f22ce0bdb20 sp 00007fff50e39730 error 4 in libxul.so[7f22ca4fc000+5bbd000] [ 1030.592229] plugin-containe[26247]: segfault at 8 ip 00007f6842740b20 sp 00007fff61b16730 error 4 in libxul.so[7f683eb7f000+5bbd000] [ 5387.045756] plugin-containe[26811]: segfault at 8 ip 00007f8d255e7b20 sp 00007fff9abe0600 error 4 in libxul.so[7f8d21a26000+5bbd000] [ 5387.295333] plugin-containe[26813]: segfault at 8 ip 00007f5a503bcb20 sp 00007fff257d4ee0 error 4 in libxul.so[7f5a4c7fb000+5bbd000] [ 5387.796220] plugin-containe[26814]: segfault at 8 ip 00007f6c2f0e3b20 sp 00007fffbdd7e810 error 4 in libxul.so[7f6c2b522000+5bbd000] [ 7212.159137] usb 2-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 7212.186387] usb 2-1.1: New USB device found, idVendor=174c, idProduct=5106 [ 7212.186391] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 7212.186393] usb 2-1.1: Product: AS2105 [ 7212.186395] usb 2-1.1: Manufacturer: ASMedia [ 7212.186397] usb 2-1.1: SerialNumber: 6RY58TP1 [ 7212.188246] usb-storage 2-1.1:1.0: USB Mass Storage device detected [ 7212.188641] scsi host9: usb-storage 2-1.1:1.0 [ 7213.187635] scsi 9:0:0:0: Direct-Access ST325041 0AS 3.AA PQ: 0 ANSI: 5 [ 7213.188813] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 7213.190738] sd 9:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7213.192264] sd 9:0:0:0: [sdc] Write Protect is off [ 7213.192267] sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 7213.193788] sd 9:0:0:0: [sdc] No Caching mode page found [ 7213.193791] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 7213.216446] sdc: sdc1 [ 7213.221884] sd 9:0:0:0: [sdc] Attached SCSI disk [ 9255.606859] [drm] GPU HANG: ecode 6:-1:0x00000000, reason: Kicking stuck wait on render ring, action: continue [ 9255.606923] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 9255.606925] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 9255.606927] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 9255.606928] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 9255.606930] [drm] GPU crash dump saved to /sys/class/drm/card0/error [19835.645765] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [19835.645771] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [19835.645772] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [19835.646785] CPU1: Core temperature/speed normal [19835.646787] CPU0: Package temperature/speed normal [19835.646790] CPU1: Package temperature/speed normal [20025.829483] perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [20125.076903] mce: [Hardware Error]: Machine check events logged [20137.231309] CPU1: Core temperature above threshold, cpu clock throttled (total events = 222) [20137.231310] CPU0: Package temperature above threshold, cpu clock throttled (total events = 228) [20137.231316] CPU1: Package temperature above threshold, cpu clock throttled (total events = 228) [20137.232314] CPU1: Core temperature/speed normal [20137.232316] CPU0: Package temperature/speed normal [20137.232319] CPU1: Package temperature/speed normal [20275.262969] mce: [Hardware Error]: Machine check events logged [20443.005541] CPU1: Core temperature above threshold, cpu clock throttled (total events = 620) [20443.005543] CPU0: Package temperature above threshold, cpu clock throttled (total events = 629) [20443.005549] CPU1: Package temperature above threshold, cpu clock throttled (total events = 629) [20443.006547] CPU1: Core temperature/speed normal [20443.006549] CPU0: Package temperature/speed normal [20443.006551] CPU1: Package temperature/speed normal [20500.542167] mce: [Hardware Error]: Machine check events logged [20750.070256] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1379) [20750.070258] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1494) [20750.070265] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1494) [20750.071262] CPU1: Core temperature/speed normal [20750.071264] CPU0: Package temperature/speed normal [20750.071267] CPU1: Package temperature/speed normal [20827.806602] CPU0: Core temperature above threshold, cpu clock throttled (total events = 123) [20827.807620] CPU0: Core temperature/speed normal [21026.193629] mce: [Hardware Error]: Machine check events logged [21060.198766] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1972) [21060.198768] CPU0: Package temperature above threshold, cpu clock throttled (total events = 2120) [21060.198774] CPU1: Package temperature above threshold, cpu clock throttled (total events = 2120) [21060.199741] CPU1: Core temperature/speed normal [21060.199743] CPU0: Package temperature/speed normal [21060.199746] CPU1: Package temperature/speed normal [21176.379938] mce: [Hardware Error]: Machine check events logged [21364.898228] CPU1: Core temperature above threshold, cpu clock throttled (total events = 2873) [21364.898230] CPU0: Package temperature above threshold, cpu clock throttled (total events = 3059) [21364.898236] CPU1: Package temperature above threshold, cpu clock throttled (total events = 3059) [21364.899187] CPU1: Core temperature/speed normal [21364.899189] CPU0: Package temperature/speed normal [21364.899192] CPU1: Package temperature/speed normal [21401.658926] mce: [Hardware Error]: Machine check events logged [26496.670712] usb 1-2: reset high-speed USB device number 3 using xhci_hcd [26496.804600] xhci_hcd 0000:0b:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88040cc457f8 [26500.061939] usb 2-2.1: new SuperSpeed USB device number 5 using xhci_hcd [26500.090254] usb 2-2.1: New USB device found, idVendor=174c, idProduct=5106 [26500.090266] usb 2-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [26500.090272] usb 2-2.1: Product: AS2105 [26500.090278] usb 2-2.1: Manufacturer: ASMedia [26500.090283] usb 2-2.1: SerialNumber: Z1F57GTZ [26500.091945] usb-storage 2-2.1:1.0: USB Mass Storage device detected [26500.092206] scsi host10: usb-storage 2-2.1:1.0 [26501.091936] scsi 10:0:0:0: Direct-Access ST3000VX 000-1CU166 CV23 PQ: 0 ANSI: 5 [26501.092920] sd 10:0:0:0: Attached scsi generic sg4 type 0 [26501.094156] sd 10:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [26501.094896] sd 10:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [26501.097336] sd 10:0:0:0: [sdd] Write Protect is off [26501.097348] sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00 [26501.099329] sd 10:0:0:0: [sdd] No Caching mode page found [26501.099332] sd 10:0:0:0: [sdd] Assuming drive cache: write through [26501.101206] sd 10:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [26501.175617] sdd: sdd1 [26501.177911] sd 10:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [26501.182027] sd 10:0:0:0: [sdd] Attached SCSI disk [26502.030506] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [26605.305974] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen [26605.305978] ata6: irq_stat 0x00000040, connection status changed [26605.305979] ata6: SError: { DevExch } [26605.305985] ata6: hard resetting link [26606.049026] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [26606.049863] ata6.00: ATA-8: ST3000VX000-1CU166, CV22, max UDMA/133 [26606.049874] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [26606.050741] ata6.00: configured for UDMA/133 [26606.050976] ata6: EH complete [26606.051353] scsi 5:0:0:0: Direct-Access ATA ST3000VX000-1CU1 CV22 PQ: 0 ANSI: 5 [26606.053048] sd 5:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [26606.053050] sd 5:0:0:0: [sde] 4096-byte physical blocks [26606.053182] sd 5:0:0:0: [sde] Write Protect is off [26606.053184] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [26606.053225] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [26606.053923] sd 5:0:0:0: Attached scsi generic sg5 type 0 [26606.113397] sde: sde1 [26606.114162] sd 5:0:0:0: [sde] Attached SCSI disk [26606.705260] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [27563.193766] CPU1: Core temperature above threshold, cpu clock throttled (total events = 3007) [27563.193767] CPU0: Package temperature above threshold, cpu clock throttled (total events = 3193) [27563.193773] CPU1: Package temperature above threshold, cpu clock throttled (total events = 3193) [27563.194734] CPU1: Core temperature/speed normal [27563.194735] CPU0: Package temperature/speed normal [27563.194739] CPU1: Package temperature/speed normal [27597.370207] ata6.00: exception Emask 0x0 SAct 0x30000000 SErr 0x0 action 0x6 frozen [27597.370212] ata6.00: failed command: READ FPDMA QUEUED [27597.370215] ata6.00: cmd 60/00:e0:00:50:b0/01:00:f6:00:00/40 tag 28 ncq 131072 in res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout) [27597.370217] ata6.00: status: { DRDY } [27597.370219] ata6.00: failed command: READ FPDMA QUEUED [27597.370221] ata6.00: cmd 60/00:e8:00:51:b0/01:00:f6:00:00/40 tag 29 ncq 131072 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [27597.370223] ata6.00: status: { DRDY } [27597.370226] ata6: hard resetting link [27598.198490] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [27598.324214] ata6.00: configured for UDMA/133 [27598.324220] ata6.00: device reported invalid CHS sector 0 [27598.324224] ata6.00: device reported invalid CHS sector 0 [27598.324231] ata6: EH complete [27611.632634] ata6.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [27611.632637] ata6.00: irq_stat 0x40000008 [27611.632639] ata6.00: failed command: READ FPDMA QUEUED [27611.632643] ata6.00: cmd 60/00:00:00:50:b0/01:00:f6:00:00/40 tag 0 ncq 131072 in res 41/40:00:90:50:b0/00:01:f6:00:00/00 Emask 0x409 (media error) [27611.632645] ata6.00: status: { DRDY ERR } [27611.632646] ata6.00: error: { UNC } [27611.633665] ata6.00: configured for UDMA/133 [27611.633722] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27611.633725] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27611.633727] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27611.633728] sd 5:0:0:0: [sde] CDB: [27611.633729] Read(16): 88 00 00 00 00 00 f6 b0 50 00 00 00 01 00 00 00 [27611.633748] blk_update_request: I/O error, dev sde, sector 4138750096 [27611.633787] ata6: EH complete [27624.140894] ata6.00: exception Emask 0x0 SAct 0x60000003 SErr 0x0 action 0x0 [27624.140904] ata6.00: irq_stat 0x40000008 [27624.140914] ata6.00: failed command: READ FPDMA QUEUED [27624.140927] ata6.00: cmd 60/08:e8:90:50:b0/00:00:f6:00:00/40 tag 29 ncq 4096 in res 41/40:08:90:50:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27624.140934] ata6.00: status: { DRDY ERR } [27624.140939] ata6.00: error: { UNC } [27624.143504] ata6.00: configured for UDMA/133 [27624.143576] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27624.143585] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27624.143591] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27624.143596] sd 5:0:0:0: [sde] CDB: [27624.143600] Read(16): 88 00 00 00 00 00 f6 b0 50 90 00 00 00 08 00 00 [27624.143635] blk_update_request: I/O error, dev sde, sector 4138750096 [27624.143693] ata6: EH complete [27634.383525] mce: [Hardware Error]: Machine check events logged [27634.432858] ata6.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0 [27634.432862] ata6.00: irq_stat 0x40000008 [27634.432864] ata6.00: failed command: READ FPDMA QUEUED [27634.432867] ata6.00: cmd 60/08:28:90:50:b0/00:00:f6:00:00/40 tag 5 ncq 4096 in res 41/40:08:90:50:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27634.432869] ata6.00: status: { DRDY ERR } [27634.432870] ata6.00: error: { UNC } [27634.433947] ata6.00: configured for UDMA/133 [27634.433959] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27634.433962] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27634.433964] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27634.433965] sd 5:0:0:0: [sde] CDB: [27634.433966] Read(16): 88 00 00 00 00 00 f6 b0 50 90 00 00 00 08 00 00 [27634.433975] blk_update_request: I/O error, dev sde, sector 4138750096 [27634.433996] ata6: EH complete [27645.592398] ata6.00: exception Emask 0x0 SAct 0x6000000 SErr 0x0 action 0x0 [27645.592409] ata6.00: irq_stat 0x40000008 [27645.592417] ata6.00: failed command: READ FPDMA QUEUED [27645.592431] ata6.00: cmd 60/10:c8:40:53:b0/00:00:f6:00:00/40 tag 25 ncq 8192 in res 41/40:10:40:53:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27645.592438] ata6.00: status: { DRDY ERR } [27645.592443] ata6.00: error: { UNC } [27645.593642] ata6.00: configured for UDMA/133 [27645.593681] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27645.593689] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27645.593696] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27645.593700] sd 5:0:0:0: [sde] CDB: [27645.593705] Read(16): 88 00 00 00 00 00 f6 b0 53 40 00 00 00 10 00 00 [27645.593740] blk_update_request: I/O error, dev sde, sector 4138750784 [27645.593811] ata6: EH complete [27656.711953] ata6.00: exception Emask 0x0 SAct 0x18000000 SErr 0x0 action 0x0 [27656.711956] ata6.00: irq_stat 0x40000008 [27656.711958] ata6.00: failed command: READ FPDMA QUEUED [27656.711962] ata6.00: cmd 60/10:d8:50:53:b0/00:00:f6:00:00/40 tag 27 ncq 8192 in res 41/40:10:50:53:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27656.711963] ata6.00: status: { DRDY ERR } [27656.711965] ata6.00: error: { UNC } [27656.713003] ata6.00: configured for UDMA/133 [27656.713016] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27656.713018] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27656.713020] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27656.713021] sd 5:0:0:0: [sde] CDB: [27656.713022] Read(16): 88 00 00 00 00 00 f6 b0 53 50 00 00 00 10 00 00 [27656.713031] blk_update_request: I/O error, dev sde, sector 4138750800 [27656.713056] ata6: EH complete [27663.217595] ata6.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x0 [27663.217599] ata6.00: irq_stat 0x40000008 [27663.217602] ata6.00: failed command: READ FPDMA QUEUED [27663.217605] ata6.00: cmd 60/08:e8:40:53:b0/00:00:f6:00:00/40 tag 29 ncq 4096 in res 41/40:08:40:53:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27663.217607] ata6.00: status: { DRDY ERR } [27663.217608] ata6.00: error: { UNC } [27663.218647] ata6.00: configured for UDMA/133 [27663.218659] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27663.218661] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27663.218663] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27663.218664] sd 5:0:0:0: [sde] CDB: [27663.218665] Read(16): 88 00 00 00 00 00 f6 b0 53 40 00 00 00 08 00 00 [27663.218674] blk_update_request: I/O error, dev sde, sector 4138750784 [27663.218696] ata6: EH complete [27671.758322] ata6.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0 [27671.758325] ata6.00: irq_stat 0x40000008 [27671.758327] ata6.00: failed command: READ FPDMA QUEUED [27671.758331] ata6.00: cmd 60/08:f0:40:53:b0/00:00:f6:00:00/40 tag 30 ncq 4096 in res 41/40:08:40:53:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27671.758332] ata6.00: status: { DRDY ERR } [27671.758334] ata6.00: error: { UNC } [27671.759336] ata6.00: configured for UDMA/133 [27671.759347] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27671.759349] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27671.759351] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27671.759352] sd 5:0:0:0: [sde] CDB: [27671.759354] Read(16): 88 00 00 00 00 00 f6 b0 53 40 00 00 00 08 00 00 [27671.759363] blk_update_request: I/O error, dev sde, sector 4138750784 [27671.759382] ata6: EH complete [27681.536493] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [27681.536496] ata6.00: irq_stat 0x40000008 [27681.536498] ata6.00: failed command: READ FPDMA QUEUED [27681.536501] ata6.00: cmd 60/08:00:00:54:b0/00:00:f6:00:00/40 tag 0 ncq 4096 in res 41/40:08:00:54:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27681.536503] ata6.00: status: { DRDY ERR } [27681.536504] ata6.00: error: { UNC } [27681.537536] ata6.00: configured for UDMA/133 [27681.537548] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27681.537551] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27681.537553] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27681.537554] sd 5:0:0:0: [sde] CDB: [27681.537555] Read(16): 88 00 00 00 00 00 f6 b0 54 00 00 00 00 08 00 00 [27681.537564] blk_update_request: I/O error, dev sde, sector 4138750976 [27681.537588] ata6: EH complete [27689.852904] ata6.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [27689.852915] ata6.00: irq_stat 0x40000008 [27689.852923] ata6.00: failed command: READ FPDMA QUEUED [27689.852937] ata6.00: cmd 60/08:08:00:56:b0/00:00:f6:00:00/40 tag 1 ncq 4096 in res 41/40:08:00:56:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27689.852944] ata6.00: status: { DRDY ERR } [27689.852949] ata6.00: error: { UNC } [27689.854142] ata6.00: configured for UDMA/133 [27689.854176] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27689.854185] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27689.854191] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27689.854196] sd 5:0:0:0: [sde] CDB: [27689.854201] Read(16): 88 00 00 00 00 00 f6 b0 56 00 00 00 00 08 00 00 [27689.854236] blk_update_request: I/O error, dev sde, sector 4138751488 [27689.854305] ata6: EH complete [27699.760663] ata6.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x0 [27699.760673] ata6.00: irq_stat 0x40000008 [27699.760682] ata6.00: failed command: READ FPDMA QUEUED [27699.760696] ata6.00: cmd 60/08:10:00:58:b0/00:00:f6:00:00/40 tag 2 ncq 4096 in res 41/40:08:00:58:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27699.760703] ata6.00: status: { DRDY ERR } [27699.760708] ata6.00: error: { UNC } [27699.761910] ata6.00: configured for UDMA/133 [27699.761944] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27699.761952] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27699.761959] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27699.761964] sd 5:0:0:0: [sde] CDB: [27699.761968] Read(16): 88 00 00 00 00 00 f6 b0 58 00 00 00 00 08 00 00 [27699.762003] blk_update_request: I/O error, dev sde, sector 4138752000 [27699.762074] ata6: EH complete [27711.934725] ata6.00: exception Emask 0x0 SAct 0x4000000 SErr 0x0 action 0x0 [27711.934728] ata6.00: irq_stat 0x40000008 [27711.934731] ata6.00: failed command: READ FPDMA QUEUED [27711.934734] ata6.00: cmd 60/08:d0:b0:5b:b0/00:00:f6:00:00/40 tag 26 ncq 4096 in res 41/40:08:b0:5b:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27711.934736] ata6.00: status: { DRDY ERR } [27711.934737] ata6.00: error: { UNC } [27711.935746] ata6.00: configured for UDMA/133 [27711.935757] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27711.935759] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27711.935761] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27711.935763] sd 5:0:0:0: [sde] CDB: [27711.935764] Read(16): 88 00 00 00 00 00 f6 b0 5b b0 00 00 00 08 00 00 [27711.935773] blk_update_request: I/O error, dev sde, sector 4138752944 [27711.935795] ata6: EH complete [27722.432348] ata6.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x0 [27722.432359] ata6.00: irq_stat 0x40000008 [27722.432367] ata6.00: failed command: READ FPDMA QUEUED [27722.432380] ata6.00: cmd 60/08:d8:b0:5b:b0/00:00:f6:00:00/40 tag 27 ncq 4096 in res 41/40:08:b0:5b:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27722.432387] ata6.00: status: { DRDY ERR } [27722.432392] ata6.00: error: { UNC } [27722.433590] ata6.00: configured for UDMA/133 [27722.433623] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27722.433631] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27722.433638] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27722.433643] sd 5:0:0:0: [sde] CDB: [27722.433647] Read(16): 88 00 00 00 00 00 f6 b0 5b b0 00 00 00 08 00 00 [27722.433681] blk_update_request: I/O error, dev sde, sector 4138752944 [27722.433740] ata6: EH complete [27734.011346] ata6.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0 [27734.011349] ata6.00: irq_stat 0x40000008 [27734.011351] ata6.00: failed command: READ FPDMA QUEUED [27734.011354] ata6.00: cmd 60/08:18:00:5c:b0/00:00:f6:00:00/40 tag 3 ncq 4096 in res 41/40:08:00:5c:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27734.011356] ata6.00: status: { DRDY ERR } [27734.011357] ata6.00: error: { UNC } [27734.012401] ata6.00: configured for UDMA/133 [27734.012412] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27734.012415] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27734.012417] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27734.012418] sd 5:0:0:0: [sde] CDB: [27734.012419] Read(16): 88 00 00 00 00 00 f6 b0 5c 00 00 00 00 08 00 00 [27734.012428] blk_update_request: I/O error, dev sde, sector 4138753024 [27734.012455] ata6: EH complete [27747.585433] ata6.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0 [27747.585436] ata6.00: irq_stat 0x40000008 [27747.585438] ata6.00: failed command: READ FPDMA QUEUED [27747.585442] ata6.00: cmd 60/08:28:08:5e:b0/00:00:f6:00:00/40 tag 5 ncq 4096 in res 41/40:08:08:5e:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27747.585443] ata6.00: status: { DRDY ERR } [27747.585444] ata6.00: error: { UNC } [27747.586455] ata6.00: configured for UDMA/133 [27747.586467] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27747.586470] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27747.586472] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27747.586473] sd 5:0:0:0: [sde] CDB: [27747.586474] Read(16): 88 00 00 00 00 00 f6 b0 5e 08 00 00 00 08 00 00 [27747.586483] blk_update_request: I/O error, dev sde, sector 4138753544 [27747.586507] ata6: EH complete [27759.030813] ata6.00: exception Emask 0x0 SAct 0x40 SErr 0x0 action 0x0 [27759.030823] ata6.00: irq_stat 0x40000008 [27759.030831] ata6.00: failed command: READ FPDMA QUEUED [27759.030844] ata6.00: cmd 60/08:30:08:5e:b0/00:00:f6:00:00/40 tag 6 ncq 4096 in res 41/40:08:08:5e:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27759.030851] ata6.00: status: { DRDY ERR } [27759.030856] ata6.00: error: { UNC } [27759.032040] ata6.00: configured for UDMA/133 [27759.032074] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27759.032083] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27759.032089] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27759.032094] sd 5:0:0:0: [sde] CDB: [27759.032098] Read(16): 88 00 00 00 00 00 f6 b0 5e 08 00 00 00 08 00 00 [27759.032133] blk_update_request: I/O error, dev sde, sector 4138753544 [27759.032199] ata6: EH complete [27768.507018] ata6.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x0 [27768.507022] ata6.00: irq_stat 0x40000008 [27768.507024] ata6.00: failed command: READ FPDMA QUEUED [27768.507027] ata6.00: cmd 60/08:38:00:60:b0/00:00:f6:00:00/40 tag 7 ncq 4096 in res 41/40:08:00:60:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27768.507029] ata6.00: status: { DRDY ERR } [27768.507030] ata6.00: error: { UNC } [27768.508065] ata6.00: configured for UDMA/133 [27768.508077] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27768.508079] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27768.508081] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27768.508082] sd 5:0:0:0: [sde] CDB: [27768.508084] Read(16): 88 00 00 00 00 00 f6 b0 60 00 00 00 00 08 00 00 [27768.508093] blk_update_request: I/O error, dev sde, sector 4138754048 [27768.508120] ata6: EH complete [27777.538636] ata6.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x0 [27777.538639] ata6.00: irq_stat 0x40000008 [27777.538641] ata6.00: failed command: READ FPDMA QUEUED [27777.538644] ata6.00: cmd 60/08:40:00:62:b0/00:00:f6:00:00/40 tag 8 ncq 4096 in res 41/40:08:00:62:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27777.538646] ata6.00: status: { DRDY ERR } [27777.538647] ata6.00: error: { UNC } [27777.539680] ata6.00: configured for UDMA/133 [27777.539691] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27777.539694] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27777.539696] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27777.539697] sd 5:0:0:0: [sde] CDB: [27777.539698] Read(16): 88 00 00 00 00 00 f6 b0 62 00 00 00 00 08 00 00 [27777.539707] blk_update_request: I/O error, dev sde, sector 4138754560 [27777.539730] ata6: EH complete [27787.764600] ata6.00: exception Emask 0x0 SAct 0x400 SErr 0x0 action 0x0 [27787.764603] ata6.00: irq_stat 0x40000008 [27787.764605] ata6.00: failed command: READ FPDMA QUEUED [27787.764608] ata6.00: cmd 60/08:50:08:64:b0/00:00:f6:00:00/40 tag 10 ncq 4096 in res 41/40:08:08:64:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27787.764610] ata6.00: status: { DRDY ERR } [27787.764611] ata6.00: error: { UNC } [27787.765606] ata6.00: configured for UDMA/133 [27787.765618] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27787.765620] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27787.765622] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27787.765623] sd 5:0:0:0: [sde] CDB: [27787.765625] Read(16): 88 00 00 00 00 00 f6 b0 64 08 00 00 00 08 00 00 [27787.765634] blk_update_request: I/O error, dev sde, sector 4138755080 [27787.765656] ata6: EH complete [27795.470696] ata6.00: exception Emask 0x0 SAct 0x800 SErr 0x0 action 0x0 [27795.470699] ata6.00: irq_stat 0x40000008 [27795.470701] ata6.00: failed command: READ FPDMA QUEUED [27795.470704] ata6.00: cmd 60/08:58:08:64:b0/00:00:f6:00:00/40 tag 11 ncq 4096 in res 41/40:08:08:64:b0/00:00:f6:00:00/00 Emask 0x409 (media error) [27795.470706] ata6.00: status: { DRDY ERR } [27795.470707] ata6.00: error: { UNC } [27795.471757] ata6.00: configured for UDMA/133 [27795.471768] sd 5:0:0:0: [sde] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [27795.471771] sd 5:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor] [27795.471772] sd 5:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed [27795.471774] sd 5:0:0:0: [sde] CDB: [27795.471775] Read(16): 88 00 00 00 00 00 f6 b0 64 08 00 00 00 08 00 00 [27795.471784] blk_update_request: I/O error, dev sde, sector 4138755080 [27795.471809] ata6: EH complete