[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.4-301.fc22.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 5.1.1 20150422 (Red Hat 5.1.1-1) (GCC) ) #1 SMP Thu May 21 13:10:33 UTC 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=UUID=a10907a7-0762-484a-8b38-e6e814faf894 ro rootflags=subvol=root vconsole.font=latarcyrheb-sun16 rhgb quiet [ 0.000000] tseg: 00cfe00000 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfceffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfcf0000-0x00000000cfcf0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfcf1000-0x00000000cfcfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfd00000-0x00000000cfdfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890FXA-UD5/GA-890FXA-UD5, BIOS F6 11/24/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable [ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 5 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 6 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 7 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: update [mem 0xcfd00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f46f0-0x000f46ff] mapped at [ffff8800000f46f0] [ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE [ 0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE [ 0.000000] BRK [0x02020000, 0x02020fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff] [ 0.000000] [mem 0x22fe00000-0x22fffffff] page 2M [ 0.000000] BRK [0x02021000, 0x02021fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x220000000-0x22fdfffff] [ 0.000000] [mem 0x220000000-0x22fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff] [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfceffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M [ 0.000000] [mem 0xcfc00000-0xcfceffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35869000-0x36c2cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6100 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFCF1000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFCF1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFCF1100 007BE3 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000CFCF0000 000040 [ 0.000000] ACPI: HPET 0x00000000CFCF8DC0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFCF8E00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 0x00000000CFCF8E40 000034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 0x00000000CFCF8EB0 000202 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000CFCF8D00 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: IVRS 0x00000000CFCF9130 0000E0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22ffea000-0x22fffdfff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000097fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfceffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2096263 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3991 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13236 pages used for memmap [ 0.000000] DMA32 zone: 847088 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfcf0000-0xcfcf0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfcf1000-0xcfcfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfd00000-0xcfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88022fc00000 s91608 r8192 d31272 u262144 [ 0.000000] pcpu-alloc: s91608 r8192 d31272 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063486 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=UUID=a10907a7-0762-484a-8b38-e6e814faf894 ro rootflags=subvol=root vconsole.font=latarcyrheb-sun16 rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 8149716K/8385052K available (7735K kernel code, 1149K rwdata, 3340K rodata, 1500K init, 1524K bss, 235336K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:65792 nr_irqs:488 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3817.533 MHz processor [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 7635.06 BogoMIPS (lpj=3817533) [ 0.000022] pid_max: default: 32768 minimum: 301 [ 0.000028] ACPI: Core revision 20150204 [ 0.002182] ACPI: All ACPI Tables successfully acquired [ 0.026745] Security Framework initialized [ 0.026752] SELinux: Initializing. [ 0.026757] SELinux: Starting in permissive mode [ 0.026758] Yama: becoming mindful. [ 0.027205] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028803] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.420440] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.420450] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.420638] Initializing cgroup subsys blkio [ 0.420641] Initializing cgroup subsys memory [ 0.420647] Initializing cgroup subsys devices [ 0.420650] Initializing cgroup subsys freezer [ 0.420653] Initializing cgroup subsys net_cls [ 0.420655] Initializing cgroup subsys perf_event [ 0.420657] Initializing cgroup subsys net_prio [ 0.420659] Initializing cgroup subsys hugetlb [ 0.420676] CPU: Physical Processor ID: 0 [ 0.420676] CPU: Processor Core ID: 0 [ 0.420678] mce: CPU supports 6 MCE banks [ 0.420681] LVT offset 0 assigned for vector 0xf9 [ 0.420685] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.420686] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.420743] Freeing SMP alternatives memory: 28K (ffffffff81e98000 - ffffffff81e9f000) [ 0.421315] ftrace: allocating 27845 entries in 109 pages [ 0.429850] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found [ 0.429880] AMD-Vi: Disabling interrupt remapping [ 0.430200] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.541407] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (fam: 10, model: 0a, stepping: 00) [ 0.541422] Performance Events: AMD PMU driver. [ 0.541425] ... version: 0 [ 0.541426] ... bit width: 48 [ 0.541426] ... generic registers: 4 [ 0.541427] ... value mask: 0000ffffffffffff [ 0.541428] ... max period: 00007fffffffffff [ 0.541428] ... fixed-purpose events: 0 [ 0.541429] ... event mask: 000000000000000f [ 0.541884] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.541952] x86: Booting SMP configuration: [ 0.541953] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.607761] x86: Booted up 1 node, 6 CPUs [ 0.607765] smpboot: Total of 6 processors activated (45810.39 BogoMIPS) [ 0.614230] devtmpfs: initialized [ 0.616889] PM: Registering ACPI NVS region [mem 0xcfcf0000-0xcfcf0fff] (4096 bytes) [ 0.617020] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.617022] pinctrl core: initialized pinctrl subsystem [ 0.617052] RTC time: 22:54:21, date: 05/26/15 [ 0.617141] NET: Registered protocol family 16 [ 0.623045] cpuidle: using governor menu [ 0.623065] node 0 link 0: io port [6000, ffff] [ 0.623068] TOM: 00000000d0000000 aka 3328M [ 0.623070] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.623071] node 0 link 0: mmio [a0000, bffff] [ 0.623073] node 0 link 0: mmio [d0000000, dfffffff] [ 0.623074] node 0 link 0: mmio [f0000000, ffffffff] [ 0.623076] node 0 link 0: mmio [e0000000, e09fffff] ==> [e0100000, e09fffff] [ 0.623077] TOM2: 0000000230000000 aka 8960M [ 0.623078] bus: [bus 00-09] on node 0 link 0 [ 0.623079] bus: 00 [io 0x0000-0xffff] [ 0.623080] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.623081] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.623082] bus: 00 [mem 0xe0a00000-0xffffffff] [ 0.623083] bus: 00 [mem 0xe0100000-0xe09fffff] [ 0.623083] bus: 00 [mem 0x230000000-0xfcffffffff] [ 0.623174] ACPI: bus type PCI registered [ 0.623175] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.623255] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.623257] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.623539] PCI: Using configuration type 1 for base access [ 0.623777] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.623777] mtrr: probably your BIOS does not setup all CPUs. [ 0.623778] mtrr: corrected configuration. [ 0.628399] ACPI: Added _OSI(Module Device) [ 0.628401] ACPI: Added _OSI(Processor Device) [ 0.628402] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.628403] ACPI: Added _OSI(Processor Aggregator Device) [ 0.632895] ACPI: Interpreter enabled [ 0.632902] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 0.632905] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 0.632914] ACPI: (supports S0 S3 S4 S5) [ 0.632915] ACPI: Using IOAPIC for interrupt routing [ 0.632933] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.635738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.635743] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.635751] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.635904] PCI host bridge to bus 0000:00 [ 0.635906] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.635907] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.635909] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.635911] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.635912] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.635913] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window] [ 0.635922] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000 [ 0.635931] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.636008] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.636081] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.636110] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.636140] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.636168] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.636198] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.636227] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.636252] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 0.636280] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.636309] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.636336] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 0.636363] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.636392] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.636416] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400 [ 0.636444] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.636473] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.636498] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.636525] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.636554] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.636580] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.636608] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.636637] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.636671] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.636686] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.636692] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.636699] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.636705] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.636712] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.636718] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff] [ 0.636804] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.636813] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff] [ 0.636876] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.636906] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.636920] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff] [ 0.636977] pci 0000:00:12.2: supports D1 D2 [ 0.636979] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.637008] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.637036] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.637045] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff] [ 0.637108] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.637136] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.637149] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff] [ 0.637208] pci 0000:00:13.2: supports D1 D2 [ 0.637210] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.637239] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.637268] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.637359] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.637374] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit] [ 0.637420] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.637448] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.637473] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.637562] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.637613] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.637638] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.637647] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff] [ 0.637709] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.637740] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.637793] pci 0000:00:15.0: supports D1 D2 [ 0.637825] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.637855] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.637864] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff] [ 0.637927] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.637958] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.637971] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff] [ 0.638028] pci 0000:00:16.2: supports D1 D2 [ 0.638030] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.638059] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.638087] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.638135] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.638180] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.638227] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.638276] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.638360] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000 [ 0.638371] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.638378] pci 0000:01:00.0: reg 0x18: [mem 0xfda80000-0xfdabffff 64bit] [ 0.638384] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff] [ 0.638393] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.638432] pci 0000:01:00.0: supports D1 D2 [ 0.638433] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.638480] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.638490] pci 0000:01:00.1: reg 0x10: [mem 0xfdafc000-0xfdafffff 64bit] [ 0.638540] pci 0000:01:00.1: supports D1 D2 [ 0.641218] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.641223] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.641225] pci 0000:00:02.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.641228] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.641282] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.641298] pci 0000:02:00.0: reg 0x10: [mem 0xfd9fe000-0xfd9fffff 64bit] [ 0.641379] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.644214] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.644218] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.644220] pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.644223] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.644265] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.644267] pci 0000:00:05.0: bridge window [io 0xa000-0xafff] [ 0.644269] pci 0000:00:05.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.644272] pci 0000:00:05.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.644297] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.644300] pci 0000:00:06.0: bridge window [io 0x9000-0x9fff] [ 0.644301] pci 0000:00:06.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 0.644304] pci 0000:00:06.0: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref] [ 0.644344] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.644358] pci 0000:05:00.0: reg 0x10: [io 0x8e00-0x8eff] [ 0.644376] pci 0000:05:00.0: reg 0x18: [mem 0xfceff000-0xfcefffff 64bit pref] [ 0.644388] pci 0000:05:00.0: reg 0x20: [mem 0xfcef8000-0xfcefbfff 64bit pref] [ 0.644396] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.644453] pci 0000:05:00.0: supports D1 D2 [ 0.644454] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.647212] pci 0000:00:07.0: PCI bridge to [bus 05] [ 0.647216] pci 0000:00:07.0: bridge window [io 0x8000-0x8fff] [ 0.647218] pci 0000:00:07.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.647221] pci 0000:00:07.0: bridge window [mem 0xfce00000-0xfcefffff 64bit pref] [ 0.647273] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 0.647287] pci 0000:06:00.0: reg 0x10: [io 0xee00-0xeeff] [ 0.647305] pci 0000:06:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit pref] [ 0.647316] pci 0000:06:00.0: reg 0x20: [mem 0xfddf8000-0xfddfbfff 64bit pref] [ 0.647325] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.647385] pci 0000:06:00.0: supports D1 D2 [ 0.647386] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.650209] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.650213] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.650215] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.650218] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.650271] pci 0000:07:00.0: [197b:2363] type 00 class 0x010601 [ 0.650335] pci 0000:07:00.0: reg 0x24: [mem 0xfdcfe000-0xfdcfffff] [ 0.650345] pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.650394] pci 0000:07:00.0: PME# supported from D3hot [ 0.650440] pci 0000:07:00.1: [197b:2363] type 00 class 0x010185 [ 0.650454] pci 0000:07:00.1: reg 0x10: [io 0xdf00-0xdf07] [ 0.650461] pci 0000:07:00.1: reg 0x14: [io 0xde00-0xde03] [ 0.650468] pci 0000:07:00.1: reg 0x18: [io 0xdd00-0xdd07] [ 0.650475] pci 0000:07:00.1: reg 0x1c: [io 0xdc00-0xdc03] [ 0.650482] pci 0000:07:00.1: reg 0x20: [io 0xdb00-0xdb0f] [ 0.650557] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.650563] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 0.650565] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.650567] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.650569] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.650613] pci 0000:08:0e.0: [104c:8024] type 00 class 0x0c0010 [ 0.650630] pci 0000:08:0e.0: reg 0x10: [mem 0xfd4ff000-0xfd4ff7ff] [ 0.650640] pci 0000:08:0e.0: reg 0x14: [mem 0xfd4f8000-0xfd4fbfff] [ 0.650712] pci 0000:08:0e.0: supports D1 D2 [ 0.650713] pci 0000:08:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.650766] pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode) [ 0.650769] pci 0000:00:14.4: bridge window [io 0x7000-0x7fff] [ 0.650771] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.650774] pci 0000:00:14.4: bridge window [mem 0xfd300000-0xfd3fffff pref] [ 0.650776] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.650777] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.650779] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.650780] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.650781] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode) [ 0.650836] pci 0000:09:00.0: [197b:2363] type 00 class 0x010400 [ 0.650916] pci 0000:09:00.0: reg 0x24: [mem 0xfd1fe000-0xfd1fffff] [ 0.650927] pci 0000:09:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.650978] pci 0000:09:00.0: PME# supported from D3hot [ 0.651026] pci 0000:09:00.1: [197b:2363] type 00 class 0x010185 [ 0.651047] pci 0000:09:00.1: reg 0x10: [io 0x6f00-0x6f07] [ 0.651059] pci 0000:09:00.1: reg 0x14: [io 0x6e00-0x6e03] [ 0.651070] pci 0000:09:00.1: reg 0x18: [io 0x6d00-0x6d07] [ 0.651082] pci 0000:09:00.1: reg 0x1c: [io 0x6c00-0x6c03] [ 0.651093] pci 0000:09:00.1: reg 0x20: [io 0x6b00-0x6b0f] [ 0.651186] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.651194] pci 0000:00:15.0: PCI bridge to [bus 09] [ 0.651197] pci 0000:00:15.0: bridge window [io 0x6000-0x6fff] [ 0.651200] pci 0000:00:15.0: bridge window [mem 0xfd100000-0xfd1fffff] [ 0.651203] pci 0000:00:15.0: bridge window [mem 0xfd000000-0xfd0fffff 64bit pref] [ 0.651236] pci_bus 0000:00: on NUMA node 0 [ 0.651394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651423] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651449] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651475] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651502] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651526] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651550] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651575] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 0.651974] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.651975] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.651977] vgaarb: loaded [ 0.651978] vgaarb: bridge control possible 0000:01:00.0 [ 0.652041] SCSI subsystem initialized [ 0.652094] libata version 3.00 loaded. [ 0.652116] ACPI: bus type USB registered [ 0.652130] usbcore: registered new interface driver usbfs [ 0.652137] usbcore: registered new interface driver hub [ 0.652158] usbcore: registered new device driver usb [ 0.652252] PCI: Using ACPI for IRQ routing [ 0.657968] PCI: pci_cache_line_size set to 64 bytes [ 0.658031] e820: reserve RAM buffer [mem 0x00098800-0x0009ffff] [ 0.658033] e820: reserve RAM buffer [mem 0xcfcf0000-0xcfffffff] [ 0.658115] NetLabel: Initializing [ 0.658116] NetLabel: domain hash size = 128 [ 0.658116] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.658125] NetLabel: unlabeled traffic allowed by default [ 0.658164] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.658166] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.660206] Switched to clocksource hpet [ 0.664901] pnp: PnP ACPI init [ 0.664987] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.664989] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.664990] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.664993] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.665154] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.665158] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.665160] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.665163] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:07:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.665167] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:09:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.665183] system 00:01: [io 0x0900-0x091f] has been reserved [ 0.665184] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.665186] system 00:01: [io 0x040b] has been reserved [ 0.665187] system 00:01: [io 0x04d6] has been reserved [ 0.665188] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.665189] system 00:01: [io 0x0c14] has been reserved [ 0.665191] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.665192] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.665193] system 00:01: [io 0x0c6f] has been reserved [ 0.665195] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.665196] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.665197] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.665206] system 00:01: [io 0x0800-0x08fe] could not be reserved [ 0.665207] system 00:01: [io 0x0a10-0x0a17] has been reserved [ 0.665208] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.665210] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.665211] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.665213] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.665214] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.665305] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.665494] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.665626] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.665712] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.665714] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.665805] system 00:06: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.665807] system 00:06: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.665808] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.665810] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.665811] system 00:06: [mem 0xcfcf0000-0xcfcfffff] could not be reserved [ 0.665812] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved [ 0.665814] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.665815] system 00:06: [mem 0x00100000-0xcfceffff] could not be reserved [ 0.665816] system 00:06: [mem 0xcfd00000-0xcfdfffff] has been reserved [ 0.665818] system 00:06: [mem 0xcfe00000-0xcfefffff] could not be reserved [ 0.665819] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.665820] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.665822] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.665823] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.665836] pnp: PnP ACPI: found 7 devices [ 0.671968] pci 0000:01:00.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref] [ 0.671971] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.671972] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.671975] pci 0000:00:02.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.671977] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.671979] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.671981] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.671983] pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.671985] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.671987] pci 0000:00:05.0: PCI bridge to [bus 03] [ 0.671988] pci 0000:00:05.0: bridge window [io 0xa000-0xafff] [ 0.671990] pci 0000:00:05.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.671992] pci 0000:00:05.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.671994] pci 0000:00:06.0: PCI bridge to [bus 04] [ 0.671996] pci 0000:00:06.0: bridge window [io 0x9000-0x9fff] [ 0.671998] pci 0000:00:06.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 0.672000] pci 0000:00:06.0: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref] [ 0.672003] pci 0000:05:00.0: BAR 6: assigned [mem 0xfcf00000-0xfcf1ffff pref] [ 0.672004] pci 0000:00:07.0: PCI bridge to [bus 05] [ 0.672005] pci 0000:00:07.0: bridge window [io 0x8000-0x8fff] [ 0.672007] pci 0000:00:07.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.672009] pci 0000:00:07.0: bridge window [mem 0xfce00000-0xfcefffff 64bit pref] [ 0.672012] pci 0000:06:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] [ 0.672013] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.672015] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.672017] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.672018] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.672021] pci 0000:07:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref] [ 0.672022] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 0.672024] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.672026] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.672028] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.672030] pci 0000:00:14.4: PCI bridge to [bus 08] [ 0.672032] pci 0000:00:14.4: bridge window [io 0x7000-0x7fff] [ 0.672035] pci 0000:00:14.4: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.672038] pci 0000:00:14.4: bridge window [mem 0xfd300000-0xfd3fffff pref] [ 0.672043] pci 0000:09:00.0: BAR 6: assigned [mem 0xfd100000-0xfd10ffff pref] [ 0.672044] pci 0000:00:15.0: PCI bridge to [bus 09] [ 0.672046] pci 0000:00:15.0: bridge window [io 0x6000-0x6fff] [ 0.672048] pci 0000:00:15.0: bridge window [mem 0xfd100000-0xfd1fffff] [ 0.672051] pci 0000:00:15.0: bridge window [mem 0xfd000000-0xfd0fffff 64bit pref] [ 0.672055] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.672056] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.672058] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.672059] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.672060] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window] [ 0.672061] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.672063] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.672064] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.672065] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.672066] pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff] [ 0.672068] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.672069] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 0.672070] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.672072] pci_bus 0000:03: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.672073] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff] [ 0.672074] pci_bus 0000:04: resource 1 [mem 0xfd500000-0xfd5fffff] [ 0.672075] pci_bus 0000:04: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref] [ 0.672077] pci_bus 0000:05: resource 0 [io 0x8000-0x8fff] [ 0.672078] pci_bus 0000:05: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.672079] pci_bus 0000:05: resource 2 [mem 0xfce00000-0xfcefffff 64bit pref] [ 0.672080] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.672081] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.672083] pci_bus 0000:06: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.672084] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] [ 0.672085] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.672086] pci_bus 0000:07: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.672088] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff] [ 0.672089] pci_bus 0000:08: resource 1 [mem 0xfd400000-0xfd4fffff] [ 0.672090] pci_bus 0000:08: resource 2 [mem 0xfd300000-0xfd3fffff pref] [ 0.672091] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window] [ 0.672092] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window] [ 0.672094] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.672095] pci_bus 0000:08: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.672096] pci_bus 0000:08: resource 8 [mem 0xcff00000-0xfebfffff window] [ 0.672097] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff] [ 0.672099] pci_bus 0000:09: resource 1 [mem 0xfd100000-0xfd1fffff] [ 0.672100] pci_bus 0000:09: resource 2 [mem 0xfd000000-0xfd0fffff 64bit pref] [ 0.672128] NET: Registered protocol family 2 [ 0.672313] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.672473] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.672694] TCP: Hash tables configured (established 65536 bind 65536) [ 0.672729] TCP: reno registered [ 0.672737] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.672776] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.672854] NET: Registered protocol family 1 [ 0.928233] pci 0000:01:00.0: Video device with shadowed ROM [ 0.928350] PCI: CLS 64 bytes, default 64 [ 0.928414] Unpacking initramfs... [ 1.134824] microcode: updated early to new patch_level=0x010000dc [ 1.139502] Freeing initrd memory: 20240K (ffff880035869000 - ffff880036c2d000) [ 1.218610] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.218611] pci 0000:00:00.2: PCI INT A: no GSI [ 1.218945] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.227193] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.306022] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.306024] software IO TLB [mem 0xcbcf0000-0xcfcf0000] (64MB) mapped at [ffff8800cbcf0000-ffff8800cfceffff] [ 1.306296] microcode: CPU0: patch_level=0x010000dc [ 1.306307] microcode: CPU1: patch_level=0x010000dc [ 1.306313] microcode: CPU2: patch_level=0x010000dc [ 1.306322] microcode: CPU3: patch_level=0x010000dc [ 1.306331] microcode: CPU4: patch_level=0x010000dc [ 1.306341] microcode: CPU5: patch_level=0x010000dc [ 1.306399] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.306403] LVT offset 1 assigned for vector 0x400 [ 1.306406] IBS: LVT offset 1 assigned [ 1.306423] perf: AMD IBS detected (0x0000001f) [ 1.307035] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.307067] Initialise system trusted keyring [ 1.307086] audit: initializing netlink subsys (disabled) [ 1.307103] audit: type=2000 audit(1432680860.779:1): initialized [ 1.307358] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.308410] zpool: loaded [ 1.308412] zbud: loaded [ 1.308562] VFS: Disk quotas dquot_6.5.2 [ 1.308590] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.308905] Key type big_key registered [ 1.308907] SELinux: Registering netfilter hooks [ 1.309729] alg: No test for stdrng (krng) [ 1.309739] NET: Registered protocol family 38 [ 1.309746] Key type asymmetric registered [ 1.309748] Asymmetric key parser 'x509' registered [ 1.309773] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.309831] io scheduler noop registered [ 1.309832] io scheduler deadline registered [ 1.309854] io scheduler cfq registered (default) [ 1.310547] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.310558] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.310641] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.310643] ACPI: Power Button [PWRB] [ 1.310672] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.310673] ACPI: Power Button [PWRF] [ 1.310904] GHES: HEST is not enabled! [ 1.310962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.331440] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.331788] Non-volatile memory driver v1.3 [ 1.331812] Linux agpgart interface v0.103 [ 1.332105] ahci 0000:00:11.0: version 3.0 [ 1.332292] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.332295] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.332955] scsi host0: ahci [ 1.333046] scsi host1: ahci [ 1.333127] scsi host2: ahci [ 1.333202] scsi host3: ahci [ 1.333279] scsi host4: ahci [ 1.333355] scsi host5: ahci [ 1.333383] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 25 [ 1.333385] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 25 [ 1.333386] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 25 [ 1.333388] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 25 [ 1.333390] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 25 [ 1.333391] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 25 [ 1.333512] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.333514] ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.333776] scsi host6: ahci [ 1.333854] scsi host7: ahci [ 1.333882] ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18 [ 1.333884] ata8: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18 [ 1.333994] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.333996] ahci 0000:09:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.334238] scsi host8: ahci [ 1.334315] scsi host9: ahci [ 1.334344] ata9: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe100 irq 17 [ 1.334347] ata10: SATA max UDMA/133 abar m8192@0xfd1fe000 port 0xfd1fe180 irq 17 [ 1.334403] libphy: Fixed MDIO Bus: probed [ 1.334488] QUIRK: Enable AMD PLL fix [ 1.334496] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.334526] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 1.334662] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 1.334777] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.334778] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.334779] usb usb1: Product: xHCI Host Controller [ 1.334780] usb usb1: Manufacturer: Linux 4.0.4-301.fc22.x86_64 xhci-hcd [ 1.334781] usb usb1: SerialNumber: 0000:02:00.0 [ 1.334863] hub 1-0:1.0: USB hub found [ 1.334869] hub 1-0:1.0: 2 ports detected [ 1.334932] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.334959] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.338010] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.338012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.338013] usb usb2: Product: xHCI Host Controller [ 1.338014] usb usb2: Manufacturer: Linux 4.0.4-301.fc22.x86_64 xhci-hcd [ 1.338015] usb usb2: SerialNumber: 0000:02:00.0 [ 1.338105] hub 2-0:1.0: USB hub found [ 1.338114] hub 2-0:1.0: 2 ports detected [ 1.338185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.338189] ehci-pci: EHCI PCI platform driver [ 1.338282] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.338312] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.338314] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.338322] ehci-pci 0000:00:12.2: debug port 1 [ 1.338346] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000 [ 1.343629] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.343668] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.343670] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.343671] usb usb3: Product: EHCI Host Controller [ 1.343672] usb usb3: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ehci_hcd [ 1.343673] usb usb3: SerialNumber: 0000:00:12.2 [ 1.343764] hub 3-0:1.0: USB hub found [ 1.343767] hub 3-0:1.0: 5 ports detected [ 1.343936] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.343968] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.343970] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.343978] ehci-pci 0000:00:13.2: debug port 1 [ 1.344001] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000 [ 1.349623] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.349649] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.349650] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.349652] usb usb4: Product: EHCI Host Controller [ 1.349653] usb usb4: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ehci_hcd [ 1.349654] usb usb4: SerialNumber: 0000:00:13.2 [ 1.349748] hub 4-0:1.0: USB hub found [ 1.349751] hub 4-0:1.0: 5 ports detected [ 1.349922] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.349953] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 1.349956] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.349964] ehci-pci 0000:00:16.2: debug port 1 [ 1.349986] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000 [ 1.355617] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.355643] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.355644] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.355645] usb usb5: Product: EHCI Host Controller [ 1.355646] usb usb5: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ehci_hcd [ 1.355647] usb usb5: SerialNumber: 0000:00:16.2 [ 1.355782] hub 5-0:1.0: USB hub found [ 1.355787] hub 5-0:1.0: 4 ports detected [ 1.355883] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.355897] ohci-pci: OHCI PCI platform driver [ 1.355996] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.356031] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 1.356045] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000 [ 1.410637] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.410640] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.410641] usb usb6: Product: OHCI PCI host controller [ 1.410642] usb usb6: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ohci_hcd [ 1.410643] usb usb6: SerialNumber: 0000:00:12.0 [ 1.410752] hub 6-0:1.0: USB hub found [ 1.410757] hub 6-0:1.0: 5 ports detected [ 1.410948] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.410991] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 1.411006] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000 [ 1.465568] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.465570] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.465571] usb usb7: Product: OHCI PCI host controller [ 1.465572] usb usb7: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ohci_hcd [ 1.465573] usb usb7: SerialNumber: 0000:00:13.0 [ 1.465677] hub 7-0:1.0: USB hub found [ 1.465683] hub 7-0:1.0: 5 ports detected [ 1.465847] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.465880] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 1.465895] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000 [ 1.520514] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.520516] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.520517] usb usb8: Product: OHCI PCI host controller [ 1.520518] usb usb8: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ohci_hcd [ 1.520519] usb usb8: SerialNumber: 0000:00:14.5 [ 1.520622] hub 8-0:1.0: USB hub found [ 1.520628] hub 8-0:1.0: 2 ports detected [ 1.520766] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.520804] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 1.520818] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000 [ 1.575505] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.575507] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.575509] usb usb9: Product: OHCI PCI host controller [ 1.575510] usb usb9: Manufacturer: Linux 4.0.4-301.fc22.x86_64 ohci_hcd [ 1.575511] usb usb9: SerialNumber: 0000:00:16.0 [ 1.575614] hub 9-0:1.0: USB hub found [ 1.575622] hub 9-0:1.0: 4 ports detected [ 1.575702] uhci_hcd: USB Universal Host Controller Interface driver [ 1.575751] usbcore: registered new interface driver usbserial [ 1.575756] usbcore: registered new interface driver usbserial_generic [ 1.575760] usbserial: USB Serial support registered for generic [ 1.575783] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.609837] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.609838] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 1.636376] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.637402] ata3: SATA link down (SStatus 0 SControl 300) [ 1.637428] ata6: SATA link down (SStatus 0 SControl 300) [ 1.637485] ata5: SATA link down (SStatus 0 SControl 300) [ 1.638378] ata7: SATA link down (SStatus 0 SControl 300) [ 1.639418] ata8: SATA link down (SStatus 0 SControl 300) [ 1.645367] usb 3-3: new high-speed USB device number 2 using ehci-pci [ 1.750397] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 1.750399] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.750911] hub 1-1:1.0: USB hub found [ 1.751267] hub 1-1:1.0: 3 ports detected [ 1.761313] usb 3-3: New USB device found, idVendor=05e3, idProduct=0607 [ 1.761315] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.761316] usb 3-3: Product: USB2.0 Hub [ 1.761701] hub 3-3:1.0: USB hub found [ 1.762059] hub 3-3:1.0: 4 ports detected [ 1.792250] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.792270] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.792292] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.793275] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.793277] ata1.00: ATA-9: Samsung SSD 840 Series, DXT09B0Q, max UDMA/133 [ 1.793278] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.793325] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.793326] ata2.00: ATA-9: Samsung SSD 840 Series, DXT09B0Q, max UDMA/133 [ 1.793328] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.793516] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.793518] ata1.00: configured for UDMA/133 [ 1.793567] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.793569] ata2.00: configured for UDMA/133 [ 1.793662] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 9B0Q PQ: 0 ANSI: 5 [ 1.793880] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.793884] ata1.00: Enabling discard_zeroes_data [ 1.793907] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.793991] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 9B0Q PQ: 0 ANSI: 5 [ 1.794015] sd 0:0:0:0: [sda] Write Protect is off [ 1.794017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.794047] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.794153] ata2.00: Enabling discard_zeroes_data [ 1.794168] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.794172] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.794202] ata1.00: Enabling discard_zeroes_data [ 1.794245] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.794278] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.794288] sd 1:0:0:0: [sdb] Write Protect is off [ 1.794290] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.794318] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.794396] ata2.00: Enabling discard_zeroes_data [ 1.794714] sda: sda1 sda2 sda3 [ 1.794724] sdb: sdb1 sdb2 [ 1.794892] ata2.00: Enabling discard_zeroes_data [ 1.794929] ata1.00: Enabling discard_zeroes_data [ 1.795062] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.795071] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.795247] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL02, max UDMA/100 [ 1.795292] ata9.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.795293] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.795391] ata10.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 [ 1.795392] ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.796503] ata9.00: configured for UDMA/133 [ 1.796724] ata10.00: configured for UDMA/133 [ 1.799081] ata4.00: configured for UDMA/100 [ 1.807666] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL02 PQ: 0 ANSI: 5 [ 1.836923] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.836925] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.837015] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.837068] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 1.837244] scsi 8:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.837399] sd 8:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.837409] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 1.837470] sd 8:0:0:0: [sdc] Write Protect is off [ 1.837472] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.837494] scsi 9:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5 [ 1.837512] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.837638] sd 9:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.837660] sd 9:0:0:0: Attached scsi generic sg4 type 0 [ 1.837714] sd 9:0:0:0: [sdd] Write Protect is off [ 1.837716] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.837745] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.859252] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.859343] mousedev: PS/2 mouse device common for all mice [ 1.859510] rtc_cmos 00:02: RTC can wake from S4 [ 1.859596] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.859615] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.859653] device-mapper: uevent: version 1.0.3 [ 1.859701] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com [ 1.860001] hidraw: raw HID events driver (C) Jiri Kosina [ 1.860078] usbcore: registered new interface driver usbhid [ 1.860079] usbhid: USB HID core driver [ 1.860124] drop_monitor: Initializing network drop monitor service [ 1.860193] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.860252] TCP: cubic registered [ 1.860257] Initializing XFRM netlink socket [ 1.860337] NET: Registered protocol family 10 [ 1.860504] mip6: Mobile IPv6 [ 1.860506] NET: Registered protocol family 17 [ 1.860814] Loading compiled-in X.509 certificates [ 1.861565] Loaded X.509 cert 'Fedora kernel signing key: 6a006aca14afb65069e2c094cb35ea806e85c24b' [ 1.861582] registered taskstats version 1 [ 1.861973] Magic number: 15:174:958 [ 1.862072] rtc_cmos 00:02: setting system clock to 2015-05-26 22:54:22 UTC (1432680862) [ 1.862105] PM: Hibernation image not present or could not be loaded. [ 1.883145] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 1.883147] GPT:1953497087 != 1953525167 [ 1.883148] GPT:Alternate GPT header not at the end of the disk. [ 1.883149] GPT:1953497087 != 1953525167 [ 1.883150] GPT: Use GNU Parted to correct GPT errors. [ 1.883159] sdd: sdd1 [ 1.883461] sd 9:0:0:0: [sdd] Attached SCSI disk [ 1.890507] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 1.890509] GPT:1953497087 != 1953525167 [ 1.890509] GPT:Alternate GPT header not at the end of the disk. [ 1.890510] GPT:1953497087 != 1953525167 [ 1.890511] GPT: Use GNU Parted to correct GPT errors. [ 1.890521] sdc: sdc1 [ 1.890813] sd 8:0:0:0: [sdc] Attached SCSI disk [ 1.891212] Freeing unused kernel memory: 1500K (ffffffff81d21000 - ffffffff81e98000) [ 1.891214] Write protecting the kernel read-only data: 12288k [ 1.891442] Freeing unused kernel memory: 444K (ffff880001791000 - ffff880001800000) [ 1.891666] Freeing unused kernel memory: 756K (ffff880001b43000 - ffff880001c00000) [ 1.893247] random: systemd urandom read with 37 bits of entropy available [ 1.893792] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.893935] systemd[1]: Detected architecture x86-64. [ 1.893936] systemd[1]: Running in initial RAM disk. [ 1.893953] systemd[1]: Set hostname to . [ 1.919162] systemd[1]: Reached target Swap. [ 1.919171] systemd[1]: Starting Swap. [ 1.919342] systemd[1]: Created slice -.slice. [ 1.919348] systemd[1]: Starting -.slice. [ 1.919372] systemd[1]: Listening on udev Kernel Socket. [ 1.919377] systemd[1]: Starting udev Kernel Socket. [ 1.919406] systemd[1]: Listening on Journal Socket. [ 1.919412] systemd[1]: Starting Journal Socket. [ 1.919422] systemd[1]: Reached target Timers. [ 1.919427] systemd[1]: Starting Timers. [ 1.919446] systemd[1]: Listening on udev Control Socket. [ 1.919451] systemd[1]: Starting udev Control Socket. [ 1.919462] systemd[1]: Reached target Local File Systems. [ 1.919466] systemd[1]: Starting Local File Systems. [ 1.919485] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.919490] systemd[1]: Starting Journal Socket (/dev/log). [ 1.919510] systemd[1]: Listening on Journal Audit Socket. [ 1.919515] systemd[1]: Starting Journal Audit Socket. [ 1.919525] systemd[1]: Reached target Sockets. [ 1.919529] systemd[1]: Starting Sockets. [ 1.919576] systemd[1]: Created slice System Slice. [ 1.919582] systemd[1]: Starting System Slice. [ 1.919950] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.920296] systemd[1]: Starting Setup Virtual Console... [ 1.920330] systemd[1]: Started dracut ask for additional cmdline parameters. [ 1.920403] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 1.920409] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 1.920786] systemd[1]: Starting dracut cmdline hook... [ 1.920875] systemd[1]: Started Load Kernel Modules. [ 1.921266] systemd[1]: Starting Apply Kernel Variables... [ 1.921286] systemd[1]: Reached target Slices. [ 1.921295] systemd[1]: Starting Slices. [ 1.921670] systemd[1]: Starting Journal Service... [ 1.921993] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.922544] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.923680] systemd[1]: Started Apply Kernel Variables. [ 1.925486] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.925522] audit: type=1130 audit(1432680862.562:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.950715] systemd[1]: Started Journal Service. [ 1.950772] audit: type=1130 audit(1432680862.587:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.972525] audit: type=1130 audit(1432680862.609:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.994363] audit: type=1130 audit(1432680862.631:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.995696] audit: type=1130 audit(1432680862.632:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.997322] audit: type=1130 audit(1432680862.634:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2.008480] audit: type=1130 audit(1432680862.645:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2.026182] audit: type=1130 audit(1432680862.663:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2.027282] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd [ 2.030876] pata_jmicron 0000:07:00.1: enabling device (0000 -> 0001) [ 2.035433] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.035442] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.035758] r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc90010e54000, 6c:f0:49:ef:89:0c, XID 083000c0 IRQ 33 [ 2.035760] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.035776] scsi host10: pata_jmicron [ 2.035826] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.035830] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.035884] scsi host11: pata_jmicron [ 2.035938] ata11: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 19 [ 2.035939] ata12: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 19 [ 2.036132] r8169 0000:06:00.0 eth1: RTL8168d/8111d at 0xffffc90010e56000, 6c:f0:49:ef:88:fc, XID 083000c0 IRQ 34 [ 2.036134] r8169 0000:06:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.036461] scsi host12: pata_jmicron [ 2.036964] scsi host13: pata_jmicron [ 2.037011] ata13: PATA max UDMA/100 cmd 0x6f00 ctl 0x6e00 bmdma 0x6b00 irq 17 [ 2.037012] ata14: PATA max UDMA/100 cmd 0x6d00 ctl 0x6c00 bmdma 0x6b08 irq 17 [ 2.040288] usb 3-3.1: new low-speed USB device number 3 using ehci-pci [ 2.042288] [drm] Initialized drm 1.1.0 20060810 [ 2.043625] 8021q: 802.1Q VLAN Support v1.8 [ 2.063388] r8169 0000:06:00.0 p9p1: renamed from eth1 [ 2.082970] raid6: sse2x1 4593 MB/s [ 2.097022] firewire_ohci 0000:08:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.099959] raid6: sse2x2 7167 MB/s [ 2.109212] [drm] radeon kernel modesetting enabled. [ 2.110358] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x174B:0x3001). [ 2.110371] [drm] register mmio base: 0xFDA80000 [ 2.110372] [drm] register mmio size: 262144 [ 2.110747] ATOM BIOS: Tahiti [ 2.110789] [drm] Changing default dispclk from 500Mhz to 600Mhz [ 2.110798] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used) [ 2.110799] radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF [ 2.110801] [drm] Detected VRAM RAM=3072M, BAR=256M [ 2.110801] [drm] RAM width 384bits DDR [ 2.110885] [TTM] Zone kernel: Available graphics memory: 4086342 kiB [ 2.110888] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.110889] [TTM] Initializing pool allocator [ 2.110893] [TTM] Initializing DMA pool allocator [ 2.110918] [drm] radeon: 3072M of VRAM memory ready [ 2.110919] [drm] radeon: 1024M of GTT memory ready. [ 2.110944] [drm] Loading tahiti Microcode [ 2.111074] [drm] Internal thermal controller with fan control [ 2.111141] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0 [ 2.116514] [drm] radeon: dpm initialized [ 2.116644] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.116949] raid6: sse2x4 7761 MB/s [ 2.116951] raid6: using algorithm sse2x4 (7761 MB/s) [ 2.116952] raid6: using intx1 recovery algorithm [ 2.117788] [drm] probing gen 2 caps for device 1002:5a16 = 31cd02/0 [ 2.117792] [drm] PCIE gen 2 link speeds already enabled [ 2.118413] xor: measuring software checksum speed [ 2.127926] prefetch64-sse: 15096.000 MB/sec [ 2.128147] [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000). [ 2.128262] radeon 0000:01:00.0: WB enabled [ 2.128264] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff8800ca2c0c00 [ 2.128266] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff8800ca2c0c04 [ 2.128268] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff8800ca2c0c08 [ 2.128269] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff8800ca2c0c0c [ 2.128270] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff8800ca2c0c10 [ 2.128665] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900112b5a18 [ 2.128667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.128667] [drm] Driver supports precise vblank timestamp query. [ 2.128669] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.128692] radeon 0000:01:00.0: radeon: using MSI. [ 2.128717] [drm] radeon: irq initialized. [ 2.137910] generic_sse: 14516.000 MB/sec [ 2.137911] xor: using function: prefetch64-sse (15096.000 MB/sec) [ 2.139063] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2640 [ 2.139065] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.139578] hub 1-1.1:1.0: USB hub found [ 2.139925] hub 1-1.1:1.0: 3 ports detected [ 2.144060] usb 3-3.1: New USB device found, idVendor=046d, idProduct=c228 [ 2.144063] usb 3-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.144064] usb 3-3.1: Product: G19 Gaming Keyboard [ 2.147667] input: G19 Gaming Keyboard as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3.1/3-3.1:1.0/0003:046D:C228.0001/input/input3 [ 2.177460] Btrfs loaded [ 2.178415] BTRFS: device label fedora devid 1 transid 6541 /dev/sda3 [ 2.186248] random: nonblocking pool is initialized [ 2.189141] audit: type=1130 audit(1432680862.826:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck@dev-disk-by\x2duuid-a10907a7\x2d0762\x2d484a\x2d8b38\x2de6e814faf894 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 2.197986] hid-generic 0003:046D:C228.0001: input,hidraw0: USB HID v1.10 Keyboard [G19 Gaming Keyboard] on usb-0000:00:12.2-3.1/input0 [ 2.203426] input: G19 Gaming Keyboard as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C228.0002/input/input4 [ 2.253954] hid-generic 0003:046D:C228.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [G19 Gaming Keyboard] on usb-0000:00:12.2-3.1/input1 [ 2.294451] [drm] ring test on 0 succeeded in 1 usecs [ 2.294456] [drm] ring test on 1 succeeded in 1 usecs [ 2.294460] [drm] ring test on 2 succeeded in 1 usecs [ 2.294467] [drm] ring test on 3 succeeded in 3 usecs [ 2.294472] [drm] ring test on 4 succeeded in 3 usecs [ 2.296226] r8169 0000:05:00.0 p7p1: renamed from eth0 [ 2.305784] tsc: Refined TSC clocksource calibration: 3817.544 MHz [ 2.317129] usb 3-3.2: new high-speed USB device number 4 using ehci-pci [ 2.401540] usb 3-3.2: New USB device found, idVendor=046d, idProduct=c229 [ 2.401543] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.401544] usb 3-3.2: Product: G19 Gaming Keyboard [ 2.401545] usb 3-3.2: Manufacturer: Logitech [ 2.420083] input: Logitech G19 Gaming Keyboard as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C229.0003/input/input5 [ 2.421939] usb 1-1.1.1: new high-speed USB device number 4 using xhci_hcd [ 2.470746] hid-generic 0003:046D:C229.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Logitech G19 Gaming Keyboard] on usb-0000:00:12.2-3.2/input1 [ 2.481471] [drm] ring test on 5 succeeded in 2 usecs [ 2.481475] [drm] UVD initialized successfully. [ 2.481813] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.481833] [drm] ib test on ring 1 succeeded in 0 usecs [ 2.481852] [drm] ib test on ring 2 succeeded in 0 usecs [ 2.481871] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.481888] [drm] ib test on ring 4 succeeded in 0 usecs [ 2.539711] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=4060 [ 2.539713] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.539715] usb 1-1.1.1: Product: Ultra Fast Media Reader [ 2.539716] usb 1-1.1.1: Manufacturer: Generic [ 2.539717] usb 1-1.1.1: SerialNumber: 000000264001 [ 2.544639] usb-storage 1-1.1.1:1.0: USB Mass Storage device detected [ 2.544760] scsi host14: usb-storage 1-1.1.1:1.0 [ 2.544824] usbcore: registered new interface driver usb-storage [ 2.545910] usb 3-3.3: new low-speed USB device number 5 using ehci-pci [ 2.546623] usbcore: registered new interface driver uas [ 2.597600] firewire_core 0000:08:0e.0: created device fw0: GUID 00eb013c006cf049, S400 [ 2.613770] usb 1-1.1.2: new high-speed USB device number 5 using xhci_hcd [ 2.626957] usb 3-3.3: New USB device found, idVendor=046d, idProduct=c051 [ 2.626959] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.626961] usb 3-3.3: Product: USB-PS/2 Optical Mouse [ 2.626962] usb 3-3.3: Manufacturer: Logitech [ 2.630700] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3.3/3-3.3:1.0/0003:046D:C051.0004/input/input6 [ 2.630794] hid-generic 0003:046D:C051.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.2-3.3/input0 [ 2.702813] usb 1-1.1.2: New USB device found, idVendor=18d1, idProduct=4ee1 [ 2.702816] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.702817] usb 1-1.1.2: Product: Nexus 5 [ 2.702819] usb 1-1.1.2: Manufacturer: LGE [ 2.702820] usb 1-1.1.2: SerialNumber: 030ad8f321305fae [ 2.777628] usb 1-1.1.3: new high-speed USB device number 6 using xhci_hcd [ 2.881035] usb 1-1.1.3: New USB device found, idVendor=045e, idProduct=075d [ 2.881037] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.881039] usb 1-1.1.3: Product: Microsoft® LifeCam Cinema(TM) [ 2.881040] usb 1-1.1.3: Manufacturer: Microsoft [ 3.153065] [drm] ib test on ring 5 succeeded [ 3.153531] [drm] Radeon Display Connectors [ 3.153532] [drm] Connector 0: [ 3.153533] [drm] DP-1 [ 3.153534] [drm] HPD5 [ 3.153535] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 3.153536] [drm] Encoders: [ 3.153537] [drm] DFP1: INTERNAL_UNIPHY2 [ 3.153537] [drm] Connector 1: [ 3.153538] [drm] HDMI-A-1 [ 3.153538] [drm] HPD1 [ 3.153540] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 3.153540] [drm] Encoders: [ 3.153541] [drm] DFP2: INTERNAL_UNIPHY2 [ 3.153541] [drm] Connector 2: [ 3.153542] [drm] DVI-D-1 [ 3.153543] [drm] HPD6 [ 3.153544] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 3.153544] [drm] Encoders: [ 3.153545] [drm] DFP3: INTERNAL_UNIPHY1 [ 3.153545] [drm] Connector 3: [ 3.153546] [drm] DVI-I-1 [ 3.153547] [drm] HPD3 [ 3.153548] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 3.153548] [drm] Encoders: [ 3.153549] [drm] DFP4: INTERNAL_UNIPHY [ 3.153550] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.250359] [drm] fb mappable at 0xD0479000 [ 3.250361] [drm] vram apper at 0xD0000000 [ 3.250362] [drm] size 9216000 [ 3.250362] [drm] fb depth is 24 [ 3.250363] [drm] pitch is 7680 [ 3.250428] fbcon: radeondrmfb (fb0) is primary device [ 3.302501] Console: switching to colour frame buffer device 210x65 [ 3.306660] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 3.306661] radeon 0000:01:00.0: registered panic notifier [ 3.306738] Switched to clocksource tsc [ 3.314931] [drm] Initialized radeon 2.41.0 20080528 for 0000:01:00.0 on minor 0 [ 3.391481] BTRFS info (device sda3): disk space caching is enabled [ 3.402025] BTRFS: detected SSD devices, enabling SSD mode [ 3.552692] scsi 14:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0 [ 3.553080] sd 14:0:0:0: Attached scsi generic sg5 type 0 [ 3.563892] sd 14:0:0:0: [sde] Attached SCSI removable disk [ 3.777184] systemd-journald[156]: Received SIGTERM from PID 1 (systemd). [ 3.826471] SELinux: 2048 avtab hash slots, 105047 rules. [ 3.837451] SELinux: 2048 avtab hash slots, 105047 rules. [ 3.858105] SELinux: 8 users, 103 roles, 4998 types, 293 bools, 1 sens, 1024 cats [ 3.858108] SELinux: 83 classes, 105047 rules [ 3.860971] SELinux: Permission audit_read in class capability2 not defined in policy. [ 3.860975] SELinux: Class binder not defined in policy. [ 3.860976] SELinux: the above unknown classes and permissions will be allowed [ 3.860980] SELinux: Completing initialization. [ 3.860981] SELinux: Setting up existing superblocks. [ 3.869516] systemd[1]: Successfully loaded SELinux policy in 61.400ms. [ 3.909876] systemd[1]: Relabelled /dev and /run in 31.123ms. [ 3.929591] systemd-sysv-generator[466]: Overwriting existing symlink /run/systemd/generator.late/livesys.service with real service [ 3.929718] systemd-sysv-generator[466]: Overwriting existing symlink /run/systemd/generator.late/network.service with real service [ 3.929750] systemd-sysv-generator[466]: Overwriting existing symlink /run/systemd/generator.late/livesys-late.service with real service [ 3.929787] systemd-sysv-generator[466]: Overwriting existing symlink /run/systemd/generator.late/netconsole.service with real service [ 4.002157] BTRFS info (device sda3): turning on discard [ 4.002161] BTRFS info (device sda3): disk space caching is enabled [ 4.030986] RPC: Registered named UNIX socket transport module. [ 4.030989] RPC: Registered udp transport module. [ 4.030991] RPC: Registered tcp transport module. [ 4.030992] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.070804] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.211599] systemd-journald[481]: Received request to flush runtime journal from PID 1 [ 4.227227] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.232198] parport_pc 00:04: reported by Plug and Play ACPI [ 4.232245] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.251401] wmi: Mapper loaded [ 4.260863] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150204/utaddress-254) [ 4.260869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.263272] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 4.263333] sp5100_tco: PCI Revision ID: 0x41 [ 4.263365] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 4.263374] sp5100_tco: Last reboot was not triggered by watchdog. [ 4.263465] sp5100_tco: initialized (0xffffc90010e50b00). heartbeat=60 sec (nowayout=0) [ 4.266713] media: Linux media interface: v0.10 [ 4.276538] Linux video capture interface: v2.00 [ 4.312253] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam Cinema(TM) (045e:075d) [ 4.317707] input: Microsoft® LifeCam Cinema(TM) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/input/input7 [ 4.317956] usbcore: registered new interface driver uvcvideo [ 4.317959] USB Video Class driver (1.1.1) [ 4.324639] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 4.324643] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 4.327324] MCE: In-kernel MCE decoding enabled. [ 4.350331] EDAC MC: Ver: 3.0.0 [ 4.358721] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 [ 4.358785] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 4.358872] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 4.358934] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 4.359026] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 4.359081] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 4.364559] sound hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 4.364564] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.364566] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.364568] sound hdaudioC0D0: mono: mono_out=0x0 [ 4.364569] sound hdaudioC0D0: dig-out=0x11/0x1e [ 4.364570] sound hdaudioC0D0: inputs: [ 4.364572] sound hdaudioC0D0: Front Mic=0x19 [ 4.364573] sound hdaudioC0D0: Rear Mic=0x18 [ 4.364574] sound hdaudioC0D0: Line=0x1a [ 4.364575] sound hdaudioC0D0: dig-in=0x1f [ 4.364894] Adding 8142844k swap on /dev/sda2. Priority:-1 extents:1 across:8142844k SSFS [ 4.373941] AMD64 EDAC driver v3.4.0 [ 4.373988] EDAC amd64: DRAM ECC disabled. [ 4.373995] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 4.386529] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 4.386608] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 4.386773] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 4.386829] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 4.386879] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 4.386928] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 4.387073] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 4.387129] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 4.409092] ppdev: user-space parallel port driver [ 4.415493] kvm: Nested Virtualization enabled [ 4.415497] kvm: Nested Paging enabled [ 4.433075] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.468554] usbcore: registered new interface driver snd-usb-audio [ 5.420160] device-mapper: ioctl: device doesn't appear to be in the dev hash table. [ 5.458941] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 5.458944] GPT:1953497087 != 1953525167 [ 5.458945] GPT:Alternate GPT header not at the end of the disk. [ 5.458946] GPT:1953497087 != 1953525167 [ 5.458947] GPT: Use GNU Parted to correct GPT errors. [ 5.458958] sdc: sdc1 [ 5.467672] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 5.467675] GPT:1953497087 != 1953525167 [ 5.467676] GPT:Alternate GPT header not at the end of the disk. [ 5.467677] GPT:1953497087 != 1953525167 [ 5.467678] GPT: Use GNU Parted to correct GPT errors. [ 5.467690] sdd: sdd1 [ 6.021382] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 6.052997] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.171688] Ebtables v2.0 registered [ 6.185089] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 6.513017] IPv6: ADDRCONF(NETDEV_UP): p7p1: link is not ready [ 6.577337] r8169 0000:05:00.0 p7p1: link down [ 6.577388] IPv6: ADDRCONF(NETDEV_UP): p7p1: link is not ready [ 6.579598] IPv6: ADDRCONF(NETDEV_UP): p9p1: link is not ready [ 6.629306] r8169 0000:06:00.0 p9p1: link down [ 6.629325] r8169 0000:06:00.0 p9p1: link down [ 6.629356] IPv6: ADDRCONF(NETDEV_UP): p9p1: link is not ready [ 7.266837] tun: Universal TUN/TAP device driver, 1.6 [ 7.266840] tun: (C) 1999-2004 Max Krasnyansky [ 7.314818] device virbr0-nic entered promiscuous mode [ 7.453620] virbr0: port 1(virbr0-nic) entered listening state [ 7.453629] virbr0: port 1(virbr0-nic) entered listening state [ 7.468416] virbr0: port 1(virbr0-nic) entered disabled state [ 7.635188] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 7.935884] sound hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 8.770413] r8169 0000:06:00.0 p9p1: link up [ 8.770424] IPv6: ADDRCONF(NETDEV_CHANGE): p9p1: link becomes ready [ 21.248654] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 36.804342] fuse init (API version 7.23) [ 37.402347] Bluetooth: Core ver 2.20 [ 37.402506] NET: Registered protocol family 31 [ 37.402508] Bluetooth: HCI device and connection manager initialized [ 37.402512] Bluetooth: HCI socket layer initialized [ 37.402513] Bluetooth: L2CAP socket layer initialized [ 37.402519] Bluetooth: SCO socket layer initialized [ 37.407969] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 37.407972] Bluetooth: BNEP filters: protocol multicast [ 37.407975] Bluetooth: BNEP socket layer initialized [ 38.326343] input: gnome15-mouse as /devices/virtual/input/input22 [ 38.329002] input: gnome15-keyboard as /devices/virtual/input/input23 [ 38.330520] input: gnome15-joystick as /devices/virtual/input/input24 [ 38.342702] input: gnome15-digital-joystick as /devices/virtual/input/input25