[   53.706418] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   53.918575] PM: Syncing filesystems ... done.
[   54.006328] PM: Preparing system for sleep (mem)
[   54.006744] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   54.008037] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   54.009113] PM: Suspending system (mem)
[   54.009124] Suspending console(s) (use no_console_suspend to debug)
[   54.009219] wlp3s0: deauthenticating from e8:94:f6:bf:cb:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[   54.143077] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   54.145046] sd 0:0:0:0: [sda] Stopping disk
[   54.342668] e1000e: EEE TX LPI TIMER: 00000011
[   54.342815] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
[   54.342816] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18
[   54.342819] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz
[   54.342820] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
[   54.342820] [drm:intel_dp_compute_config] DP link bw required 249660 available 432000
[   54.342822] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 18, dithering: 1
[   54.342823] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff8800aad9e800 for pipe A
[   54.342824] [drm:intel_dump_pipe_config] cpu_transcoder: D
[   54.342824] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[   54.342825] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.342826] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64
[   54.342827] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[   54.342827] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[   54.342827] [drm:intel_dump_pipe_config] requested mode:
[   54.342829] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x0 0x9
[   54.342829] [drm:intel_dump_pipe_config] adjusted mode:
[   54.342831] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
[   54.342832] [drm:intel_dump_crtc_timings] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9
[   54.342832] [drm:intel_dump_pipe_config] port clock: 270000
[   54.342833] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
[   54.342833] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[   54.342834] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   54.342835] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   54.342835] [drm:intel_dump_pipe_config] ips: 1
[   54.342835] [drm:intel_dump_pipe_config] double wide: 0
[   54.342836] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0
[   54.342836] [drm:intel_dump_pipe_config] planes on this crtc
[   54.342838] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
[   54.342839] [drm:intel_dump_pipe_config] 	FB:52, fb = 1920x1080 format = 0x34325258
[   54.342839] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 1920x1080 dst (0, 0) 1920x1080
[   54.342840] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[   54.342841] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[   54.414900] [drm:intel_edp_backlight_off] 
[   54.495652] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[   54.495662] [drm:intel_disable_pipe] disabling pipe A
[   54.497758] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[   54.497764] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[   54.497916] [drm:edp_panel_off] Turn eDP port A panel power off
[   54.497919] [drm:wait_panel_off] Wait for panel power off time
[   54.497921] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[   54.552861] [drm:wait_panel_status] Wait complete
[   54.552885] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[   54.552886] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[   54.552887] [drm:check_encoder_state] [ENCODER:41:DP MST-41]
[   54.552887] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[   54.552888] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[   54.552888] [drm:check_encoder_state] [ENCODER:46:TMDS-46]
[   54.552889] [drm:check_encoder_state] [ENCODER:48:DP MST-48]
[   54.552889] [drm:check_encoder_state] [ENCODER:49:DP MST-49]
[   54.552890] [drm:check_encoder_state] [ENCODER:50:DP MST-50]
[   54.552890] [drm:check_crtc_state] [CRTC:21]
[   54.552892] [drm:check_crtc_state] [CRTC:25]
[   54.552893] [drm:check_crtc_state] [CRTC:29]
[   54.552894] [drm:check_shared_dpll_state] WRPLL 1
[   54.552895] [drm:check_shared_dpll_state] WRPLL 2
[   54.556438] [drm:intel_display_power_put] disabling display
[   54.556440] [drm:hsw_set_power_well] Requesting to disable the power well
[   54.556441] [drm:intel_display_power_put] disabling always-on
[   54.556512] PM: suspend of devices complete after 546.964 msecs
[   54.556820] [drm:hsw_enable_pc8] Enabling package C8+
[   54.573768] PM: late suspend of devices complete after 17.230 msecs
[   54.576160] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[   54.576532] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[   54.587050] PM: noirq suspend of devices complete after 13.271 msecs
[   54.587356] ACPI: Preparing to enter system sleep state S3
[   54.624685] ACPI : EC: EC stopped
[   54.624685] PM: Saving platform NVS memory
[   54.624689] Disabling non-boot CPUs ...
[   54.626060] smpboot: CPU 1 is now offline
[   54.626367] Broke affinity for irq 42
[   54.626370] Broke affinity for irq 45
[   54.627386] smpboot: CPU 2 is now offline
[   54.627724] Broke affinity for irq 18
[   54.627728] Broke affinity for irq 42
[   54.627731] Broke affinity for irq 45
[   54.628745] smpboot: CPU 3 is now offline
[   54.629997] ACPI: Low-level resume complete
[   54.630048] ACPI : EC: EC started
[   54.630048] PM: Restoring platform NVS memory
[   54.630393] Enabling non-boot CPUs ...
[   54.630417] x86: Booting SMP configuration:
[   54.630418] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   54.634639]  cache: parent cpu1 should not be sleeping
[   54.634704] CPU1 is up
[   54.634717] smpboot: Booting Node 0 Processor 2 APIC 0x2
[   54.638927]  cache: parent cpu2 should not be sleeping
[   54.638995] CPU2 is up
[   54.639008] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   54.643235]  cache: parent cpu3 should not be sleeping
[   54.643342] CPU3 is up
[   54.652280] ACPI: Waking up from system sleep state S3
[   54.726124] acpi LNXPOWER:02: Turning OFF
[   54.740613] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[   54.741486] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[   54.742246] PM: noirq resume of devices complete after 14.110 msecs
[   54.742305] [drm:hsw_disable_pc8] Disabling package C8+
[   54.748601] [drm:intel_display_power_get] enabling always-on
[   54.748601] [drm:intel_display_power_get] enabling display
[   54.748685] PM: early resume of devices complete after 6.423 msecs
[   54.750182] rtc_cmos 00:02: System wakeup disabled by ACPI
[   54.752693] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbcd65018
[   54.752713] [drm:intel_opregion_setup] Public ACPI methods supported
[   54.752714] [drm:intel_opregion_setup] SWSCI supported
[   54.758729] [drm:swsci_setup] SWSCI BIOS requested (00200383) SBCB callbacks that are not supported (02200705)
[   54.758729] [drm:swsci_setup] SWSCI GBDA callbacks 00000483, SBCB callbacks 00200383
[   54.758730] [drm:intel_opregion_setup] ASLE supported
[   54.760143] sd 0:0:0:0: [sda] Starting disk
[   54.764848] [drm:gen8_init_common_ring] Execlists enabled for render ring
[   54.764852] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
[   54.764854] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
[   54.764857] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
[   54.764907] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz
[   54.764972] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: disabled
[   54.764973] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
[   54.764974] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled
[   54.764975] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[   54.764976] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[   54.764977] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
[   54.764978] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[   54.764979] [drm:intel_modeset_readout_hw_state] [ENCODER:41:DP MST-41] hw state readout: disabled, pipe A
[   54.764979] [drm:intel_modeset_readout_hw_state] [ENCODER:42:DP MST-42] hw state readout: disabled, pipe B
[   54.764979] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP MST-43] hw state readout: disabled, pipe C
[   54.764980] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A
[   54.764981] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe A
[   54.764981] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe B
[   54.764981] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP MST-50] hw state readout: disabled, pipe C
[   54.764982] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:eDP-1] hw state readout: disabled
[   54.764983] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled
[   54.764984] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled
[   54.764985] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-2] hw state readout: disabled
[   54.764986] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-2] hw state readout: disabled
[   54.765000] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff8800aad9e800 for pipe A
[   54.765001] [drm:intel_dump_pipe_config] cpu_transcoder: A
[   54.765001] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[   54.765002] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.765003] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.765003] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[   54.765004] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[   54.765004] [drm:intel_dump_pipe_config] requested mode:
[   54.765005] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   54.765005] [drm:intel_dump_pipe_config] adjusted mode:
[   54.765006] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   54.765007] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   54.765007] [drm:intel_dump_pipe_config] port clock: 0
[   54.765008] [drm:intel_dump_pipe_config] pipe src size: 0x0
[   54.765008] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[   54.765009] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   54.765009] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   54.765009] [drm:intel_dump_pipe_config] ips: 0
[   54.765010] [drm:intel_dump_pipe_config] double wide: 0
[   54.765010] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[   54.765011] [drm:intel_dump_pipe_config] planes on this crtc
[   54.765013] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
[   54.765014] [drm:intel_dump_pipe_config] 	FB:52, fb = 1920x1080 format = 0x34325258
[   54.765014] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
[   54.765015] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[   54.765016] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[   54.765017] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff8800aad9ec00 for pipe B
[   54.765017] [drm:intel_dump_pipe_config] cpu_transcoder: B
[   54.765018] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[   54.765018] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.765019] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.765019] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[   54.765020] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[   54.765020] [drm:intel_dump_pipe_config] requested mode:
[   54.765021] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   54.765021] [drm:intel_dump_pipe_config] adjusted mode:
[   54.765022] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   54.765022] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   54.765023] [drm:intel_dump_pipe_config] port clock: 0
[   54.765023] [drm:intel_dump_pipe_config] pipe src size: 0x0
[   54.765023] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[   54.765024] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   54.765024] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   54.765025] [drm:intel_dump_pipe_config] ips: 0
[   54.765025] [drm:intel_dump_pipe_config] double wide: 0
[   54.765025] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[   54.765025] [drm:intel_dump_pipe_config] planes on this crtc
[   54.765026] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
[   54.765027] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
[   54.765027] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
[   54.765028] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff8800aad9bc00 for pipe C
[   54.765029] [drm:intel_dump_pipe_config] cpu_transcoder: C
[   54.765029] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[   54.765029] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.765030] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.765030] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[   54.765031] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[   54.765031] [drm:intel_dump_pipe_config] requested mode:
[   54.765032] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   54.765032] [drm:intel_dump_pipe_config] adjusted mode:
[   54.765033] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   54.765033] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[   54.765034] [drm:intel_dump_pipe_config] port clock: 0
[   54.765034] [drm:intel_dump_pipe_config] pipe src size: 0x0
[   54.765035] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[   54.765035] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   54.765035] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   54.765036] [drm:intel_dump_pipe_config] ips: 0
[   54.765036] [drm:intel_dump_pipe_config] double wide: 0
[   54.765036] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[   54.765037] [drm:intel_dump_pipe_config] planes on this crtc
[   54.765037] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
[   54.765038] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
[   54.765038] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
[   54.765041] [drm:intel_display_power_put] disabling always-on
[   54.765045] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
[   54.765046] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18
[   54.765047] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz
[   54.765048] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
[   54.765049] [drm:intel_dp_compute_config] DP link bw required 249660 available 432000
[   54.765050] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 18, dithering: 1
[   54.765050] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff8800aaac7800 for pipe A
[   54.765051] [drm:intel_dump_pipe_config] cpu_transcoder: D
[   54.765051] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[   54.765052] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[   54.765052] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64
[   54.765053] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[   54.765053] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[   54.765053] [drm:intel_dump_pipe_config] requested mode:
[   54.765054] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x0 0x9
[   54.765055] [drm:intel_dump_pipe_config] adjusted mode:
[   54.765056] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
[   54.765056] [drm:intel_dump_crtc_timings] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9
[   54.765057] [drm:intel_dump_pipe_config] port clock: 270000
[   54.765057] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
[   54.765058] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[   54.765058] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[   54.765058] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[   54.765059] [drm:intel_dump_pipe_config] ips: 1
[   54.765059] [drm:intel_dump_pipe_config] double wide: 0
[   54.765060] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0
[   54.765060] [drm:intel_dump_pipe_config] planes on this crtc
[   54.765061] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
[   54.765062] [drm:intel_dump_pipe_config] 	FB:52, fb = 1920x1080 format = 0x34325258
[   54.765062] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
[   54.765062] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[   54.765063] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[   54.765070] [drm:intel_display_power_get] enabling always-on
[   54.768150] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz
[   54.768161] [drm:edp_panel_on] Turn eDP port A panel power on
[   54.768164] [drm:wait_panel_power_cycle] Wait for panel power cycle
[   54.774176] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
[   55.065352] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   55.069983] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[   55.069985] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   55.070025] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[   55.070344] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[   55.074763] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[   55.074764] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   55.074818] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[   55.075110] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[   55.075169] ata1.00: configured for UDMA/133
[   55.100408] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[   55.100410] [drm:wait_panel_status] Wait complete
[   55.100413] [drm:wait_panel_on] Wait for panel power on
[   55.100415] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[   55.301367] [drm:wait_panel_status] Wait complete
[   55.301389] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[   55.301401] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[   55.302680] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[   55.302685] [drm:intel_dp_set_signal_levels] Using vswing level 0
[   55.302688] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[   55.303341] [drm:intel_dp_start_link_train] clock recovery OK
[   55.304298] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[   55.304546] [drm:intel_enable_pipe] enabling pipe A
[   55.304759] [drm:intel_edp_backlight_on] 
[   55.304766] [drm:intel_panel_enable_backlight] pipe A
[   55.304777] [drm:intel_panel_actually_set_backlight] set backlight PWM = 136
[   55.315842] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[   55.354772] [drm:intel_connector_check_state] [CONNECTOR:32:eDP-1]
[   55.354774] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[   55.354775] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[   55.354776] [drm:check_encoder_state] [ENCODER:41:DP MST-41]
[   55.354777] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[   55.354777] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[   55.354777] [drm:check_encoder_state] [ENCODER:46:TMDS-46]
[   55.354778] [drm:check_encoder_state] [ENCODER:48:DP MST-48]
[   55.354778] [drm:check_encoder_state] [ENCODER:49:DP MST-49]
[   55.354779] [drm:check_encoder_state] [ENCODER:50:DP MST-50]
[   55.354779] [drm:check_crtc_state] [CRTC:21]
[   55.354785] [drm:check_crtc_state] [CRTC:25]
[   55.354786] [drm:check_crtc_state] [CRTC:29]
[   55.354787] [drm:check_shared_dpll_state] WRPLL 1
[   55.354788] [drm:check_shared_dpll_state] WRPLL 2
[   55.354795] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1]
[   55.355105] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[   55.355409] [drm:intel_dp_probe_oui] Branch OUI: 540000
[   55.355843] [drm:drm_helper_hpd_irq_event] [CONNECTOR:32:eDP-1] status updated from connected to connected
[   55.355881] [drm:intel_didl_outputs] 8 outputs detected
[   55.361373] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   55.368233] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   55.431162] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   55.438051] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   55.479889] PM: resume of devices complete after 730.751 msecs
[   55.480090] PM: Finishing wakeup.
[   55.480091] Restarting tasks ... done.
[   55.503009] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[   55.533436] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[   55.603021] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   55.698281] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
[   55.698284] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1]
[   55.698286] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1]
[   55.698607] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[   55.698953] [drm:intel_dp_probe_oui] Branch OUI: 540000
[   55.699393] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[   55.699396] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes :
[   55.699398] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9
[   55.699402] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
[   55.699480] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[   55.699482] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1]
[   55.699483] [drm:intel_dp_detect] [CONNECTOR:40:DP-1]
[   55.699486] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected
[   55.699489] [drm:drm_mode_getconnector] [CONNECTOR:47:?]
[   55.699490] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2]
[   55.699491] [drm:intel_dp_detect] [CONNECTOR:47:DP-2]
[   55.699494] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] disconnected
[   55.699495] [drm:drm_mode_getconnector] [CONNECTOR:44:?]
[   55.699496] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1]
[   55.699497] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1]
[   55.706720] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[   55.706723] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected
[   55.706736] [drm:drm_mode_getconnector] [CONNECTOR:51:?]
[   55.706738] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2]
[   55.706739] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-2]
[   55.706902] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   55.706905] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   55.706906] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
[   55.707052] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[   55.707053] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[   55.707054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[   55.707055] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] disconnected
[   55.877865] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[   58.703700] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[   58.703710] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[   59.015777] wlp3s0: authenticate with e8:94:f6:bf:cb:f0
[   59.023532] wlp3s0: send auth to e8:94:f6:bf:cb:f0 (try 1/3)
[   59.026024] wlp3s0: authenticated
[   59.026811] wlp3s0: associate with e8:94:f6:bf:cb:f0 (try 1/3)
[   59.030893] wlp3s0: RX AssocResp from e8:94:f6:bf:cb:f0 (capab=0x431 status=0 aid=1)
[   59.032371] wlp3s0: associated