[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0-rc3debug1+ (build@fedorabuild.localdomain) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Wed Jul 22 17:33:54 EEST 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.0-rc3debug1+ root=UUID=bfa58f44-69df-4b0c-bdb0-a18180acbe7b ro rd.luks.uuid=luks-bff430b5-9876-4c7c-b281-cc029ed13bb7 rd.luks.uuid=luks-c412ac6c-38bb-4b59-afb3-275a839a20ba rhgb crashkernel=64M@16M drm.debug=0xe log_buf_len=1M i915.enable_psr=1 i915.enable_fbc=0 [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x000000001000afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000001000b000-0x00000000b0606fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b0607000-0x00000000bcbfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcbff000-0x00000000bcd7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcd7f000-0x00000000bcdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bcdff000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20BX000TBM/20BX000TBM, BIOS JBET50WW (1.15 ) 06/10/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x33e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 00BCE00000 mask 7FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xb0607 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE [ 0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE [ 0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x33de00000-0x33dffffff] [ 0.000000] [mem 0x33de00000-0x33dffffff] page 2M [ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x320000000-0x33ddfffff] [ 0.000000] [mem 0x320000000-0x33ddfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x300000000-0x31fffffff] [ 0.000000] [mem 0x300000000-0x31fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1000b000-0xb0606fff] [ 0.000000] [mem 0x1000b000-0x101fffff] page 4k [ 0.000000] [mem 0x10200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xb05fffff] page 2M [ 0.000000] [mem 0xb0600000-0xb0606fff] page 4k [ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE [ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff] [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 256672(97%) [ 0.000000] RAMDISK: [mem 0x33c3f000-0x35e17fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000BCDFE1C0 0000F4 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000BCDF8000 00010C (v05 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000BCDE3000 010F99 (v01 LENOVO TP-JB 00001150 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000BCD68000 000040 [ 0.000000] ACPI: SLIC 0x00000000BCDFD000 000176 (v01 LENOVO TP-JB 00001150 PTEC 00000001) [ 0.000000] ACPI: ASF! 0x00000000BCDFC000 0000A5 (v32 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000BCDFB000 000038 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: ECDT 0x00000000BCDFA000 000052 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000BCDF7000 000098 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000BCDF6000 00003C (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000BCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDE0000 0006C9 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000BCDDA000 00006E (v05 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000BCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000BCDD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000BCDD7000 0006A5 (v01 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x00000000BCDD6000 000042 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000BCCB2000 000055 (v03 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000BCDD5000 000046 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000BCDD4000 000064 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000BCDD3000 0002F6 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: DMAR 0x00000000BCDD2000 0000B0 (v01 LENOVO TP-JB 00001150 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x33deeb000-0x33defefff] [ 0.000000] crashkernel reservation failed - memory is in use. [ 0.000000] [ffffea0000000000-ffffea000cffffff] PMD -> [ffff880331800000-ffff88033d5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000033dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x000000001000b000-0x00000000b0606fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000033dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000033dffffff] [ 0.000000] On node 0 totalpages: 3073432 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11224 pages used for memmap [ 0.000000] DMA32 zone: 718332 pages, LIFO batch:31 [ 0.000000] Normal zone: 36736 pages used for memmap [ 0.000000] Normal zone: 2351104 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88033dc00000 s85528 r8192 d29160 u262144 [ 0.000000] pcpu-alloc: s85528 r8192 d29160 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3025387 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-rc3debug1+ root=UUID=bfa58f44-69df-4b0c-bdb0-a18180acbe7b ro rd.luks.uuid=luks-bff430b5-9876-4c7c-b281-cc029ed13bb7 rd.luks.uuid=luks-c412ac6c-38bb-4b59-afb3-275a839a20ba rhgb crashkernel=64M@16M drm.debug=0xe log_buf_len=1M i915.enable_psr=1 i915.enable_fbc=0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 11985328K/12293728K available (5736K kernel code, 713K rwdata, 1956K rodata, 904K init, 952K bss, 308400K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:4352 nr_irqs:760 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2593.988 MHz processor [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=2593988) [ 0.000192] pid_max: default: 32768 minimum: 301 [ 0.000277] ACPI: Core revision 20150619 [ 0.015631] ACPI: All ACPI Tables successfully acquired [ 0.015804] Security Framework initialized [ 0.015887] SELinux: Initializing. [ 0.015977] SELinux: Starting in permissive mode [ 0.016775] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.019695] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.021038] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021142] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021456] Initializing cgroup subsys blkio [ 0.021540] Initializing cgroup subsys memory [ 0.021627] Initializing cgroup subsys devices [ 0.021711] Initializing cgroup subsys freezer [ 0.021792] Initializing cgroup subsys net_cls [ 0.021876] Initializing cgroup subsys perf_event [ 0.021967] Initializing cgroup subsys net_prio [ 0.022051] Initializing cgroup subsys hugetlb [ 0.022152] CPU: Physical Processor ID: 0 [ 0.022234] CPU: Processor Core ID: 0 [ 0.022316] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.022400] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.023447] mce: CPU supports 7 MCE banks [ 0.023539] CPU0: Thermal monitoring enabled (TM1) [ 0.023629] process: using mwait in idle threads [ 0.023714] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.023799] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.024183] Freeing SMP alternatives memory: 24K (ffffffff81996000 - ffffffff8199c000) [ 0.026289] DMAR: Host address width 39 [ 0.026373] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.026461] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.026589] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.026675] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.026802] DMAR: RMRR base: 0x000000bc527000 end: 0x000000bc53dfff [ 0.026888] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bfffffff [ 0.026984] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.027071] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.027155] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.027208] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.027811] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.027896] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.028590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.038688] TSC deadline timer enabled [ 0.038691] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04) [ 0.038944] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.039277] ... version: 3 [ 0.039358] ... bit width: 48 [ 0.039440] ... generic registers: 4 [ 0.039521] ... value mask: 0000ffffffffffff [ 0.039605] ... max period: 0000ffffffffffff [ 0.039689] ... fixed-purpose events: 3 [ 0.039772] ... event mask: 000000070000000f [ 0.040364] x86: Booting SMP configuration: [ 0.040448] .... node #0, CPUs: #1 #2 #3 [ 0.053481] x86: Booted up 1 node, 4 CPUs [ 0.053641] smpboot: Total of 4 processors activated (20751.90 BogoMIPS) [ 0.057334] devtmpfs: initialized [ 0.057603] PM: Registering ACPI NVS region [mem 0xbcbff000-0xbcd7efff] (1572864 bytes) [ 0.057798] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.057990] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.058081] pinctrl core: initialized pinctrl subsystem [ 0.058265] NET: Registered protocol family 16 [ 0.061185] cpuidle: using governor menu [ 0.061329] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.061457] ACPI: bus type PCI registered [ 0.061691] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.061822] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.061913] PCI: Using configuration type 1 for base access [ 0.064468] ACPI: Added _OSI(Module Device) [ 0.064553] ACPI: Added _OSI(Processor Device) [ 0.064637] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064720] ACPI: Added _OSI(Processor Aggregator Device) [ 0.066395] ACPI : EC: EC description table is found, configuring boot EC [ 0.066494] ACPI : EC: EC started [ 0.070605] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.072987] ACPI: Dynamic OEM Table Load: [ 0.073157] ACPI: SSDT 0xFFFF88032F6B0000 000436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.073941] ACPI: Dynamic OEM Table Load: [ 0.074110] ACPI: SSDT 0xFFFF88032F6B0800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.074932] ACPI: Dynamic OEM Table Load: [ 0.075099] ACPI: SSDT 0xFFFF88032F6B8000 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.076207] ACPI: Interpreter enabled [ 0.076296] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580) [ 0.076510] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580) [ 0.076727] ACPI: (supports S0 S3 S5) [ 0.076810] ACPI: Using IOAPIC for interrupt routing [ 0.076916] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.079016] ACPI: Power Resource [PUBS] (on) [ 0.079689] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.080018] ACPI: Power Resource [NVP3] (on) [ 0.080121] ACPI: Power Resource [NVP2] (on) [ 0.082879] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.083390] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11) [ 0.083896] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) [ 0.084402] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11) [ 0.084907] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.085403] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.086020] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) [ 0.086526] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11) [ 0.087039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.087131] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.087332] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.087456] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.087588] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.087715] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.087841] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.087987] PCI host bridge to bus 0000:00 [ 0.088073] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.088159] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.088248] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.088336] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.088464] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.088589] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.088721] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.088784] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.088796] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.088802] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.088806] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.088857] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.088868] pci 0000:00:03.0: reg 0x10: [mem 0xe1130000-0xe1133fff 64bit] [ 0.088940] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.088960] pci 0000:00:14.0: reg 0x10: [mem 0xe1120000-0xe112ffff 64bit] [ 0.088999] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.089020] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.089137] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.089161] pci 0000:00:16.0: reg 0x10: [mem 0xe1139000-0xe113901f 64bit] [ 0.089209] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.089259] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.089278] pci 0000:00:19.0: reg 0x10: [mem 0xe1100000-0xe111ffff] [ 0.089285] pci 0000:00:19.0: reg 0x14: [mem 0xe113e000-0xe113efff] [ 0.089291] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.089327] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.089347] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.089462] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.089484] pci 0000:00:1b.0: reg 0x10: [mem 0xe1134000-0xe1137fff 64bit] [ 0.089523] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.089575] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400 [ 0.089633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.089717] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400 [ 0.089777] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.089822] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.089943] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.089968] pci 0000:00:1d.0: reg 0x10: [mem 0xe113d000-0xe113d3ff] [ 0.090028] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.090050] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.090168] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.090304] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.090321] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.090326] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.090332] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.090338] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.090343] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.090349] pci 0000:00:1f.2: reg 0x24: [mem 0xe113c000-0xe113c7ff] [ 0.090369] pci 0000:00:1f.2: PME# supported from D3hot [ 0.090412] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.090425] pci 0000:00:1f.3: reg 0x10: [mem 0xe1138000-0xe11380ff 64bit] [ 0.090442] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.090504] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.090544] pci 0000:00:1f.6: reg 0x10: [mem 0xe113b000-0xe113bfff 64bit] [ 0.090699] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.091010] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000 [ 0.091117] pci 0000:03:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit] [ 0.091351] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.093792] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.093886] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff] [ 0.094739] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.094944] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62 [ 0.095094] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.095182] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.095310] vgaarb: loaded [ 0.095390] vgaarb: bridge control possible 0000:00:02.0 [ 0.095524] SCSI subsystem initialized [ 0.095615] libata version 3.00 loaded. [ 0.095621] ACPI: bus type USB registered [ 0.095717] usbcore: registered new interface driver usbfs [ 0.095809] usbcore: registered new interface driver hub [ 0.095910] usbcore: registered new device driver usb [ 0.096051] PCI: Using ACPI for IRQ routing [ 0.097317] PCI: pci_cache_line_size set to 64 bytes [ 0.097653] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.097654] e820: reserve RAM buffer [mem 0xb0607000-0xb3ffffff] [ 0.097655] e820: reserve RAM buffer [mem 0x33e000000-0x33fffffff] [ 0.097733] NetLabel: Initializing [ 0.097816] NetLabel: domain hash size = 128 [ 0.097899] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.097992] NetLabel: unlabeled traffic allowed by default [ 0.098127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.098546] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.100653] clocksource: Switched to clocksource hpet [ 0.100820] pnp: PnP ACPI init [ 0.101166] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.101257] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.101352] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.101440] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.101532] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.101621] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.101713] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.101801] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.101889] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.101978] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.102066] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.102155] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.102244] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.102332] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.102421] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.102510] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.102599] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.102693] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.102762] system 00:01: [io 0x1800-0x189f] could not be reserved [ 0.102851] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.102938] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.103025] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.103111] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.103198] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.103285] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.103371] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.103458] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.103545] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.103631] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.103722] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.103809] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.103897] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.103985] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.104073] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.104162] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.104250] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.104339] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.104380] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.104395] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.104410] pnp 00:04: Plug and Play ACPI device, IDs LEN200f PNP0f13 (active) [ 0.104713] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.104820] system 00:06: [mem 0xc0010000-0xc001ffff] has been reserved [ 0.104910] system 00:06: [mem 0xc0000000-0xc000ffff] has been reserved [ 0.104999] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.105018] pnp: PnP ACPI: found 7 devices [ 0.111054] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.111198] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.111201] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.111202] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.111213] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.111214] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.111216] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.111217] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.111219] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.111220] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.111223] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0100000-0xc02fffff] [ 0.111315] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0300000-0xc04fffff 64bit pref] [ 0.111445] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.111532] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.111623] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.112622] pci 0000:00:1c.0: bridge window [mem 0xc0100000-0xc02fffff] [ 0.112720] pci 0000:00:1c.0: bridge window [mem 0xc0300000-0xc04fffff 64bit pref] [ 0.112856] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.112949] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff] [ 0.113049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.113050] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.113052] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.113053] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] [ 0.113054] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.113055] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.113056] pci_bus 0000:02: resource 1 [mem 0xc0100000-0xc02fffff] [ 0.113058] pci_bus 0000:02: resource 2 [mem 0xc0300000-0xc04fffff 64bit pref] [ 0.113059] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.113080] NET: Registered protocol family 2 [ 0.113325] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.113634] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.113829] TCP: Hash tables configured (established 131072 bind 65536) [ 0.113948] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.114078] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.114227] NET: Registered protocol family 1 [ 0.114322] pci 0000:00:02.0: Video device with shadowed ROM [ 0.114732] PCI: CLS 64 bytes, default 64 [ 0.114772] Unpacking initramfs... [ 0.626155] Freeing initrd memory: 34660K (ffff880033c3f000 - ffff880035e18000) [ 0.626312] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.626403] software IO TLB [mem 0xac607000-0xb0607000] (64MB) mapped at [ffff8800ac607000-ffff8800b0606fff] [ 0.626599] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.626729] hw unit of domain pp0-core 2^-14 Joules [ 0.626814] hw unit of domain package 2^-14 Joules [ 0.626897] hw unit of domain dram 2^-14 Joules [ 0.626987] hw unit of domain pp1-gpu 2^-14 Joules [ 0.627104] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff] [ 0.627240] ------------[ cut here ]------------ [ 0.627326] WARNING: CPU: 0 PID: 1 at arch/x86/mm/ioremap.c:209 __ioremap_caller+0x2a4/0x390() [ 0.627454] Info: mapping multiple BARs. Your kernel is fine. [ 0.627503] Modules linked in: [ 0.627698] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc3debug1+ #1 [ 0.627786] Hardware name: LENOVO 20BX000TBM/20BX000TBM, BIOS JBET50WW (1.15 ) 06/10/2015 [ 0.627913] ffffffff8171d608 00000000b0a6f4ca ffffffff8171d608 ffffffff81590f82 [ 0.628192] ffff88032f967b80 ffffffff8106c8c3 00000000fed10000 ffffc90001b90000 [ 0.628466] 00000000fed16000 ffff88032f671c00 0000000000006000 ffffffff8106c948 [ 0.628741] Call Trace: [ 0.628823] [] ? dump_stack+0x40/0x50 [ 0.628911] [] ? warn_slowpath_common+0x73/0xa0 [ 0.629005] [] ? warn_slowpath_fmt+0x58/0x80 [ 0.629092] [] ? __ioremap_caller+0x2a4/0x390 [ 0.629179] [] ? snb_uncore_imc_init_box+0x6e/0xb0 [ 0.629268] [] ? uncore_pci_probe+0xc3/0x190 [ 0.629356] [] ? local_pci_probe+0x38/0x90 [ 0.629442] [] ? pci_device_probe+0xdd/0x120 [ 0.629531] [] ? driver_probe_device+0x1e7/0x440 [ 0.629619] [] ? __driver_attach+0x76/0x80 [ 0.629706] [] ? driver_probe_device+0x440/0x440 [ 0.629794] [] ? bus_for_each_dev+0x68/0xb0 [ 0.629881] [] ? bus_add_driver+0x1e1/0x280 [ 0.629968] [] ? uncore_cpu_setup+0xc/0xc [ 0.630057] [] ? driver_register+0x5a/0xd0 [ 0.630144] [] ? intel_uncore_init+0xcc/0x2a0 [ 0.630231] [] ? uncore_cpu_setup+0xc/0xc [ 0.630317] [] ? do_one_initcall+0xaa/0x1f0 [ 0.630404] [] ? parse_args+0x220/0x4a0 [ 0.630491] [] ? kernel_init_freeable+0x16f/0x207 [ 0.630579] [] ? rest_init+0x80/0x80 [ 0.630665] [] ? kernel_init+0x9/0xe0 [ 0.630750] [] ? ret_from_fork+0x3f/0x70 [ 0.630836] [] ? rest_init+0x80/0x80 [ 0.630924] ---[ end trace 97143c7058fe4f5b ]--- [ 0.631066] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1d [ 0.631158] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1d [ 0.631250] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1d [ 0.631345] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1d [ 0.631469] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.632028] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.632135] Initialise system trusted keyring [ 0.632241] audit: initializing netlink subsys (disabled) [ 0.632338] audit: type=2000 audit(1437593124.624:1): initialized [ 0.632585] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.633805] zpool: loaded [ 0.633888] zbud: loaded [ 0.634411] Key type big_key registered [ 0.634497] SELinux: Registering netfilter hooks [ 0.637308] NET: Registered protocol family 38 [ 0.637397] Key type asymmetric registered [ 0.637483] Asymmetric key parser 'x509' registered [ 0.637578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.637730] io scheduler noop registered [ 0.637813] io scheduler deadline registered [ 0.637922] io scheduler cfq registered (default) [ 0.638288] intel_idle: MWAIT substates: 0x11142120 [ 0.638289] intel_idle: v0.4 model 0x3D [ 0.638290] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.638595] ACPI: AC Adapter [AC] (on-line) [ 0.638728] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.638956] ACPI: Lid Switch [LID] [ 0.639074] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.639205] ACPI: Sleep Button [SLPB] [ 0.639316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.639443] ACPI: Power Button [PWRF] [ 0.640544] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.640633] ACPI: Thermal Zone [THM0] (46 C) [ 0.640740] GHES: HEST is not enabled! [ 0.640890] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.641444] Non-volatile memory driver v1.3 [ 0.641836] ahci 0000:00:1f.2: version 3.0 [ 0.648128] ACPI: Battery Slot [BAT0] (battery present) [ 0.652029] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 0.652244] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.652762] scsi host0: ahci [ 0.652975] scsi host1: ahci [ 0.653218] scsi host2: ahci [ 0.653374] ata1: SATA max UDMA/133 abar m2048@0xe113c000 port 0xe113c100 irq 42 [ 0.653584] ata2: DUMMY [ 0.653708] ata3: DUMMY [ 0.653979] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.654148] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.654436] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.654639] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.654704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.654836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.655037] usb usb1: Product: xHCI Host Controller [ 0.655175] usb usb1: Manufacturer: Linux 4.2.0-rc3debug1+ xhci-hcd [ 0.655262] usb usb1: SerialNumber: 0000:00:14.0 [ 0.655433] hub 1-0:1.0: USB hub found [ 0.655588] hub 1-0:1.0: 11 ports detected [ 0.655909] ACPI: Battery Slot [BAT1] (battery present) [ 0.656611] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.656728] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.656874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.656963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.657094] usb usb2: Product: xHCI Host Controller [ 0.657185] usb usb2: Manufacturer: Linux 4.2.0-rc3debug1+ xhci-hcd [ 0.657272] usb usb2: SerialNumber: 0000:00:14.0 [ 0.657433] hub 2-0:1.0: USB hub found [ 0.657521] hub 2-0:1.0: 4 ports detected [ 0.658052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.658144] ehci-pci: EHCI PCI platform driver [ 0.658293] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.658419] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.658555] ehci-pci 0000:00:1d.0: debug port 2 [ 0.662526] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.662535] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe113d000 [ 0.668010] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.668113] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.668202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.668327] usb usb3: Product: EHCI Host Controller [ 0.668411] usb usb3: Manufacturer: Linux 4.2.0-rc3debug1+ ehci_hcd [ 0.668499] usb usb3: SerialNumber: 0000:00:1d.0 [ 0.668659] hub 3-0:1.0: USB hub found [ 0.668745] hub 3-0:1.0: 3 ports detected [ 0.668992] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.669089] ohci-pci: OHCI PCI platform driver [ 0.669190] uhci_hcd: USB Universal Host Controller Interface driver [ 0.669311] usbcore: registered new interface driver usbserial [ 0.669402] usbcore: registered new interface driver usbserial_generic [ 0.669494] usbserial: USB Serial support registered for generic [ 0.669605] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.671585] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.671672] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.671841] mousedev: PS/2 mouse device common for all mice [ 0.672079] rtc_cmos 00:02: RTC can wake from S4 [ 0.672300] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.672421] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.672608] device-mapper: uevent: version 1.0.3 [ 0.672756] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com [ 0.672894] Intel P-state driver initializing. [ 0.673522] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.674784] hidraw: raw HID events driver (C) Jiri Kosina [ 0.675166] usbcore: registered new interface driver usbhid [ 0.676635] usbhid: USB HID core driver [ 0.677050] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.677287] Initializing XFRM netlink socket [ 0.678094] NET: Registered protocol family 10 [ 0.678670] mip6: Mobile IPv6 [ 0.678796] NET: Registered protocol family 17 [ 0.679444] AVX2 version of gcm_enc/dec engaged. [ 0.679568] AES CTR mode by8 optimization enabled [ 0.709483] Loading compiled-in X.509 certificates [ 0.710131] Loaded X.509 cert 'Build time autogenerated kernel key: 2c6054e8ace31decba9995e224512c19dcb13e0f' [ 0.710263] registered taskstats version 1 [ 0.710347] zswap: loading zswap [ 0.710426] zswap: using zbud pool [ 0.710507] zswap: using lzo compressor [ 0.711080] rtc_cmos 00:02: setting system clock to 2015-07-22 19:25:24 UTC (1437593124) [ 0.958240] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.961404] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.961407] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.961574] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 0.961868] ata1.00: READ LOG DMA EXT failed, trying unqueued [ 0.961999] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.962001] ata1.00: ATA-9: SAMSUNG MZ7TE512HMHP-000L1, EXT06L0Q, max UDMA/133 [ 0.962124] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.963619] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.963622] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.963760] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 0.964009] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 0.964077] ata1.00: configured for UDMA/133 [ 0.964364] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TE512 6L0Q PQ: 0 ANSI: 5 [ 0.964767] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB) [ 0.965157] sd 0:0:0:0: [sda] Write Protect is off [ 0.965251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.965328] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.965921] sda: sda1 sda2 sda3 sda4 < sda5 > [ 0.966279] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.966493] Freeing unused kernel memory: 904K (ffffffff818b4000 - ffffffff81996000) [ 0.966619] Write protecting the kernel read-only data: 8192k [ 0.966832] Freeing unused kernel memory: 396K (ffff88000159d000 - ffff880001600000) [ 0.966998] Freeing unused kernel memory: 92K (ffff8800017e9000 - ffff880001800000) [ 0.968689] random: systemd urandom read with 21 bits of entropy available [ 0.969629] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 0.969901] systemd[1]: Detected architecture x86-64. [ 0.969985] systemd[1]: Running in initial RAM disk. [ 0.970203] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 0.970538] systemd[1]: Set hostname to . [ 0.995047] systemd[1]: Reached target Local File Systems. [ 0.995137] systemd[1]: Starting Local File Systems. [ 0.995533] systemd[1]: Reached target Swap. [ 0.995618] systemd[1]: Starting Swap. [ 0.995975] systemd[1]: Reached target Timers. [ 0.996068] systemd[1]: Starting Timers. [ 0.996581] systemd[1]: Created slice -.slice. [ 0.996667] systemd[1]: Starting -.slice. [ 0.997082] systemd[1]: Listening on Journal Audit Socket. [ 0.997169] systemd[1]: Starting Journal Audit Socket. [ 0.997554] systemd[1]: Listening on Journal Socket. [ 0.997641] systemd[1]: Starting Journal Socket. [ 0.998009] systemd[1]: Listening on udev Kernel Socket. [ 0.998095] systemd[1]: Starting udev Kernel Socket. [ 0.998499] systemd[1]: Listening on udev Control Socket. [ 0.998586] systemd[1]: Starting udev Control Socket. [ 0.998960] systemd[1]: Listening on Journal Socket (/dev/log). [ 0.999055] systemd[1]: Starting Journal Socket (/dev/log). [ 0.999458] systemd[1]: Created slice System Slice. [ 0.999545] systemd[1]: Starting System Slice. [ 0.999649] systemd[1]: Started dracut ask for additional cmdline parameters. [ 0.999970] systemd[1]: Starting Setup Virtual Console... [ 1.000651] systemd[1]: Starting Load Kernel Modules... [ 1.001219] systemd[1]: Starting dracut cmdline hook... [ 1.001984] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 1.002087] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. [ 1.002481] systemd[1]: Reached target Slices. [ 1.002574] systemd[1]: Starting Slices. [ 1.003078] systemd[1]: Starting Journal Service... [ 1.003913] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.008179] systemd[1]: Reached target Sockets. [ 1.008289] systemd[1]: Starting Sockets. [ 1.015116] fuse init (API version 7.23) [ 1.016792] systemd[1]: Started Load Kernel Modules. [ 1.016966] audit: type=1130 audit(1437593124.803:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.017703] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.017876] audit: type=1130 audit(1437593124.804:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.020718] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.021588] systemd[1]: Starting Apply Kernel Variables... [ 1.026313] systemd[1]: Started Apply Kernel Variables. [ 1.026451] audit: type=1130 audit(1437593124.813:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.028187] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.028320] audit: type=1130 audit(1437593124.815:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.031233] systemd[1]: Started Journal Service. [ 1.031375] audit: type=1130 audit(1437593124.818:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.051346] audit: type=1130 audit(1437593124.838:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.075641] audit: type=1130 audit(1437593124.862:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.084677] usb 3-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.084772] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.085093] hub 3-1:1.0: USB hub found [ 1.085589] hub 3-1:1.0: 8 ports detected [ 1.096458] audit: type=1130 audit(1437593124.883:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.099831] audit: type=1130 audit(1437593124.886:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.136131] pps_core: LinuxPPS API ver. 1 registered [ 1.136217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.143621] PTP clock support registered [ 1.190960] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k [ 1.191046] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.191252] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.213377] [drm] Initialized drm 1.1.0 20060810 [ 1.398655] Setting dangerous option enable_fbc - tainting kernel [ 1.464860] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.464950] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:6b:e4:8b [ 1.465938] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.466048] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 1.466656] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.466751] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 1.466751] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 1.466836] [drm] Memory usable by graphics device = 4096M [ 1.466933] [drm:i915_gem_gtt_init] GMADR size = 256M [ 1.466934] [drm:i915_gem_gtt_init] GTT stolen size = 32M [ 1.466935] [drm:i915_gem_gtt_init] ppgtt mode: 2 [ 1.466936] [drm] Replacing VGA console driver [ 1.467679] Console: switching to colour dummy device 80x25 [ 1.468000] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbcd65018 [ 1.468007] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.468008] [drm:intel_opregion_setup] SWSCI supported [ 1.473514] [drm:swsci_setup] SWSCI BIOS requested (00200383) SBCB callbacks that are not supported (02200705) [ 1.473517] [drm:swsci_setup] SWSCI GBDA callbacks 00000483, SBCB callbacks 00200383 [ 1.473518] [drm:intel_opregion_setup] ASLE supported [ 1.473608] [drm:intel_device_info_runtime_init] slice total: 0 [ 1.473609] [drm:intel_device_info_runtime_init] subslice total: 0 [ 1.473610] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 1.473612] [drm:intel_device_info_runtime_init] EU total: 0 [ 1.473613] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 1.473614] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.473616] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 1.473617] [drm:intel_device_info_runtime_init] has EU power gating: n [ 1.473618] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.473623] [drm] Driver supports precise vblank timestamp query. [ 1.473628] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 1.473630] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 1.473633] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.473634] [drm:parse_general_definitions] crt_ddc_bus_pin: 0 [ 1.473636] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 1.473639] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.473641] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x8 0xa [ 1.473643] [drm:parse_lfp_panel_data] VBT initial LVDS value 20033c [ 1.473645] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255 [ 1.473647] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 1.473649] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.473651] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 1.473652] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.473655] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.473656] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.473658] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.473659] [drm:parse_ddi_port] VBT HDMI level shift for port B: 2 [ 1.473661] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.473662] [drm:parse_ddi_port] VBT HDMI level shift for port C: 13 [ 1.473670] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.473675] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at be000000 [ 1.473678] [drm:intel_display_power_get] enabling always-on [ 1.473679] [drm:intel_display_power_get] enabling display [ 1.473743] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.473745] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 1.473746] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 1.473748] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 1.473749] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.473751] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.473753] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 1.473754] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 1.473755] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 1.473757] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.473758] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.473760] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 1.473761] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 1.473763] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 1.473764] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.473767] [drm:intel_modeset_init] 3 display pipes available. [ 1.473780] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 1.473782] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz [ 1.473785] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.474101] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.474150] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 400 t11_t12 6000 [ 1.474151] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 135 t9 800 t10 400 t11_t12 5000 [ 1.474153] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 40, power cycle delay 600 [ 1.474155] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 14, off delay 80 [ 1.474156] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.474199] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.474205] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 1.474623] [drm:intel_dp_get_dpcd] DPCD: 12 0a c2 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 1.474921] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.474923] [drm:intel_dp_get_dpcd] Displayport TPS3 supported [ 1.475210] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 1.475211] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.475214] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.475222] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1900001, PP_DIV 0x4af06 [ 1.477232] [drm:drm_dp_i2c_do_msg] native defer [ 1.478231] [drm:drm_dp_i2c_do_msg] native defer [ 1.479515] [drm:drm_dp_i2c_do_msg] native defer [ 1.480540] [drm:drm_dp_i2c_do_msg] native defer [ 1.481806] [drm:drm_dp_i2c_do_msg] native defer [ 1.482823] [drm:drm_dp_i2c_do_msg] native defer [ 1.484093] [drm:drm_dp_i2c_do_msg] native defer [ 1.485142] [drm:drm_dp_i2c_do_msg] native defer [ 1.486413] [drm:drm_dp_i2c_do_msg] native defer [ 1.487412] [drm:drm_dp_i2c_do_msg] native defer [ 1.488679] [drm:drm_dp_i2c_do_msg] native defer [ 1.489203] 8021q: 802.1Q VLAN Support v1.8 [ 1.489695] [drm:drm_dp_i2c_do_msg] native defer [ 1.490979] [drm:drm_dp_i2c_do_msg] native defer [ 1.491917] [drm:drm_dp_i2c_do_msg] native defer [ 1.493197] [drm:drm_dp_i2c_do_msg] native defer [ 1.494210] [drm:drm_dp_i2c_do_msg] native defer [ 1.495252] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.495253] [drm:intel_dp_drrs_init] VBT doesn't support DRRS [ 1.495257] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 852/852 [ 1.495272] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.495306] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.495366] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.495383] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 1.504557] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled [ 1.504560] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled [ 1.504562] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled [ 1.504563] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 1.504565] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 1.504568] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A [ 1.504570] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 1.504571] [drm:intel_modeset_readout_hw_state] [ENCODER:41:DP MST-41] hw state readout: disabled, pipe A [ 1.504572] [drm:intel_modeset_readout_hw_state] [ENCODER:42:DP MST-42] hw state readout: disabled, pipe B [ 1.504572] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP MST-43] hw state readout: disabled, pipe C [ 1.504573] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 1.504574] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe A [ 1.504575] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe B [ 1.504576] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP MST-50] hw state readout: disabled, pipe C [ 1.504577] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:eDP-1] hw state readout: enabled [ 1.504579] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 1.504580] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 1.504581] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-2] hw state readout: disabled [ 1.504582] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-2] hw state readout: disabled [ 1.504587] [drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 21: Can't calculate constants, dotclock = 0! [ 1.504595] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff88032a645000 for pipe A [ 1.504595] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.504596] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 1.504597] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.504599] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4860009, gmch_n: 8388608, link_m: 270000, link_n: 524288, tu: 64 [ 1.504600] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.504601] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.504601] [drm:intel_dump_pipe_config] requested mode: [ 1.504603] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 0 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x0 [ 1.504604] [drm:intel_dump_pipe_config] adjusted mode: [ 1.504605] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 0 1920 1968 2000 2080 1080 1083 1088 1111 0x40 0x9 [ 1.504606] [drm:intel_dump_crtc_timings] crtc timings: 139045 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x40 flags: 0x9 [ 1.504607] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.504608] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 1.504609] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 1.504610] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.504611] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.504612] [drm:intel_dump_pipe_config] ips: 0 [ 1.504612] [drm:intel_dump_pipe_config] double wide: 0 [ 1.504613] [drm:intel_dump_pipe_config] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 [ 1.504614] [drm:intel_dump_pipe_config] planes on this crtc [ 1.504615] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 1.504616] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 1.504617] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 1.504619] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff88032a646800 for pipe B [ 1.504620] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.504621] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.504622] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.504623] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.504624] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.504625] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.504625] [drm:intel_dump_pipe_config] requested mode: [ 1.504627] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.504627] [drm:intel_dump_pipe_config] adjusted mode: [ 1.504629] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.504630] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.504631] [drm:intel_dump_pipe_config] port clock: 0 [ 1.504631] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.504632] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 1.504633] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.504634] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.504635] [drm:intel_dump_pipe_config] ips: 0 [ 1.504635] [drm:intel_dump_pipe_config] double wide: 0 [ 1.504636] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 [ 1.504637] [drm:intel_dump_pipe_config] planes on this crtc [ 1.504638] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0 [ 1.504639] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0 [ 1.504640] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0 [ 1.504642] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff880328788000 for pipe C [ 1.504643] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.504644] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.504645] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.504646] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.504647] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.504647] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.504648] [drm:intel_dump_pipe_config] requested mode: [ 1.504649] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.504650] [drm:intel_dump_pipe_config] adjusted mode: [ 1.504651] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.504652] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.504653] [drm:intel_dump_pipe_config] port clock: 0 [ 1.504654] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.504655] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 1.504656] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.504657] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.504657] [drm:intel_dump_pipe_config] ips: 0 [ 1.504658] [drm:intel_dump_pipe_config] double wide: 0 [ 1.504659] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 [ 1.504660] [drm:intel_dump_pipe_config] planes on this crtc [ 1.504661] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0 [ 1.504662] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0 [ 1.504663] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0 [ 1.504667] [drm:intel_display_power_put] disabling display [ 1.504669] [drm:hsw_set_power_well] Requesting to disable the power well [ 1.504710] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, fffff000] [ 1.506080] [drm:i915_gem_context_init] LR context support initialized [ 1.506094] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00000000 [ 1.506157] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 1.506368] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1.506374] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1.506377] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1.506381] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1.506429] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz [ 1.506529] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.506541] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] [ 1.506543] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1] [ 1.506611] [drm:intel_didl_outputs] 8 outputs detected [ 1.506855] [drm:intel_dp_probe_oui] Sink OUI: 0022b9 [ 1.507051] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.507164] [drm:intel_dp_probe_oui] Branch OUI: 540000 [ 1.507420] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.507634] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] status updated from 3 to 1 [ 1.507642] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.507645] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes : [ 1.507648] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 1.507649] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 1.507651] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 1.507655] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] status updated from 3 to 2 [ 1.507656] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 1.507657] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 1.507659] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 1.507862] [drm] Initialized i915 1.6.0 20150717 for 0000:00:02.0 on minor 0 [ 1.536473] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 1.558588] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 1.566574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.566577] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] status updated from 3 to 2 [ 1.566580] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 1.566583] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] [ 1.566584] [drm:intel_dp_detect] [CONNECTOR:47:DP-2] [ 1.566588] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] status updated from 3 to 2 [ 1.566589] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] disconnected [ 1.566591] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] [ 1.566592] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-2] [ 1.566777] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.566779] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.566976] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.566979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.566982] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] status updated from 3 to 2 [ 1.566983] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] disconnected [ 1.566986] [drm:drm_setup_crtcs] [ 1.566989] [drm:drm_enable_connectors] connector 32 enabled? yes [ 1.566990] [drm:drm_enable_connectors] connector 40 enabled? no [ 1.566991] [drm:drm_enable_connectors] connector 44 enabled? no [ 1.566992] [drm:drm_enable_connectors] connector 47 enabled? no [ 1.566994] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.566996] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.566998] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.567000] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1920x1080 [ 1.567001] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.567003] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.567004] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.567005] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.567007] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 21 (0,0) [ 1.567009] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.567012] [drm:i915_gem_object_create_stolen] creating stolen object: size=7e9000 [ 1.567018] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.567619] [drm:intelfb_create] allocated 1920x1080 fb: 0x0009d000, bo ffff8803295e0000 [ 1.567694] fbcon: inteldrmfb (fb0) is primary device [ 1.567745] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains [ 1.567745] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18 [ 1.567748] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138700KHz [ 1.567749] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18 [ 1.567749] [drm:intel_dp_compute_config] DP link bw required 249660 available 432000 [ 1.567751] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 18, dithering: 1 [ 1.567752] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff88032a2e8800 for pipe A [ 1.567753] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 1.567753] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1.567754] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.567755] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4847916, gmch_n: 8388608, link_m: 269328, link_n: 524288, tu: 64 [ 1.567756] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.567757] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.567757] [drm:intel_dump_pipe_config] requested mode: [ 1.567759] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 1.567759] [drm:intel_dump_pipe_config] adjusted mode: [ 1.567760] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 1.567761] [drm:intel_dump_crtc_timings] crtc timings: 138700 1920 1968 2000 2080 1080 1083 1088 1111, type: 0x48 flags: 0x9 [ 1.567762] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.567762] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.567763] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 1.567764] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.567764] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.567764] [drm:intel_dump_pipe_config] ips: 1 [ 1.567765] [drm:intel_dump_pipe_config] double wide: 0 [ 1.567765] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 [ 1.567766] [drm:intel_dump_pipe_config] planes on this crtc [ 1.567767] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 1.567767] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 1.567768] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 1.569607] [drm:intel_edp_backlight_off] [ 1.594896] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf004a3/0x943300/0x12e800, board id: 3053, fw id: 2560 [ 1.594901] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.628650] tsc: Refined TSC clocksource calibration: 2593.998 MHz [ 1.628652] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564164249b, max_idle_ns: 440795293190 ns [ 1.632192] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.650641] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.650648] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 1.650649] [drm:i915_get_vblank_timestamp] crtc 0 is disabled [ 1.650652] [drm:intel_disable_pipe] disabling pipe A [ 1.652826] [drm:edp_panel_off] Turn eDP port A panel power off [ 1.652829] [drm:wait_panel_off] Wait for panel power off time [ 1.652832] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1.712999] [drm:wait_panel_status] Wait complete [ 1.713008] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 21 [ 1.713009] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 1.714727] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz [ 1.714741] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.714744] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 2.254034] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 2.294110] [drm:wait_panel_status] Wait complete [ 2.294115] [drm:wait_panel_on] Wait for panel power on [ 2.294118] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 2.494598] [drm:wait_panel_status] Wait complete [ 2.494605] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 2.494610] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 2.495690] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.495692] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 2.495692] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 2.496401] [drm:intel_dp_start_link_train] clock recovery OK [ 2.497316] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful [ 2.497410] [drm:intel_enable_pipe] enabling pipe A [ 2.497563] [drm:intel_edp_backlight_on] [ 2.497564] [drm:intel_panel_enable_backlight] pipe A [ 2.497571] [drm:intel_panel_actually_set_backlight] set backlight PWM = 852 [ 2.509467] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 2.514202] [drm:set_no_fbc_reason] Disabling FBC: disabled per module param [ 2.564243] [drm:intel_connector_check_state] [CONNECTOR:32:eDP-1] [ 2.564246] [drm:check_encoder_state] [ENCODER:31:TMDS-31] [ 2.564246] [drm:check_encoder_state] [ENCODER:39:TMDS-39] [ 2.564247] [drm:check_encoder_state] [ENCODER:41:DP MST-41] [ 2.564248] [drm:check_encoder_state] [ENCODER:42:DP MST-42] [ 2.564248] [drm:check_encoder_state] [ENCODER:43:DP MST-43] [ 2.564249] [drm:check_encoder_state] [ENCODER:46:TMDS-46] [ 2.564249] [drm:check_encoder_state] [ENCODER:48:DP MST-48] [ 2.564250] [drm:check_encoder_state] [ENCODER:49:DP MST-49] [ 2.564250] [drm:check_encoder_state] [ENCODER:50:DP MST-50] [ 2.564251] [drm:check_crtc_state] [CRTC:21] [ 2.564259] [drm:check_crtc_state] [CRTC:25] [ 2.564259] [drm:check_crtc_state] [CRTC:29] [ 2.564260] [drm:check_shared_dpll_state] WRPLL 1 [ 2.564261] [drm:check_shared_dpll_state] WRPLL 2 [ 2.564276] [drm:drm_fb_helper_hotplug_event] [ 2.564277] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] [ 2.564278] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1] [ 2.564598] [drm:intel_dp_probe_oui] Sink OUI: 0022b9 [ 2.564912] [drm:intel_dp_probe_oui] Branch OUI: 540000 [ 2.565374] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.565376] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes : [ 2.565378] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 2.565378] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 2.565379] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 2.565381] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 2.565381] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 2.565382] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 2.573193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.573194] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 2.573194] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] [ 2.573195] [drm:intel_dp_detect] [CONNECTOR:47:DP-2] [ 2.573196] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] disconnected [ 2.573196] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] [ 2.573197] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-2] [ 2.573376] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.573377] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.573567] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.573567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.573568] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] disconnected [ 2.573570] [drm:drm_setup_crtcs] [ 2.573571] [drm:drm_enable_connectors] connector 32 enabled? yes [ 2.573571] [drm:drm_enable_connectors] connector 40 enabled? no [ 2.573572] [drm:drm_enable_connectors] connector 44 enabled? no [ 2.573572] [drm:drm_enable_connectors] connector 47 enabled? no [ 2.573572] [drm:drm_enable_connectors] connector 51 enabled? no [ 2.573573] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 2.573574] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 2.573574] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1920x1080 [ 2.573575] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 2.573575] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 2.573576] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 2.573576] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 2.573577] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 21 (0,0) [ 2.573624] Console: switching to colour frame buffer device 240x67 [ 2.577096] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.577343] [drm:i915_gem_open] [ 2.577432] [drm:i915_gem_open] [ 2.577472] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 2.577473] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 2.577477] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 2.577479] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] [ 2.577480] [drm:intel_dp_detect] [CONNECTOR:32:eDP-1] [ 2.577805] [drm:intel_dp_probe_oui] Sink OUI: 0022b9 [ 2.578117] [drm:intel_dp_probe_oui] Branch OUI: 540000 [ 2.578606] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.578608] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:eDP-1] probed modes : [ 2.578611] [drm:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 138700 1920 1968 2000 2080 1080 1083 1088 1111 0x48 0x9 [ 2.578625] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 2.582818] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 2.582821] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] [ 2.582823] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 2.582827] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:DP-1] disconnected [ 2.582831] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 2.582834] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 2.582835] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] [ 2.582836] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 2.590204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.590271] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:44:HDMI-A-1] disconnected [ 2.590274] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 2.590276] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 2.590277] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] [ 2.590278] [drm:intel_dp_detect] [CONNECTOR:47:DP-2] [ 2.590280] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:47:DP-2] disconnected [ 2.590281] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 2.590283] [drm:drm_mode_getconnector] [CONNECTOR:51:?] [ 2.590284] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] [ 2.590284] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-2] [ 2.590470] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.590470] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.590650] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.590651] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.590653] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:51:HDMI-A-2] disconnected [ 2.590659] [drm:drm_mode_getconnector] [CONNECTOR:51:?] [ 2.590673] [drm:drm_mode_addfb2] [FB:52] [ 2.613703] [drm:drm_mode_addfb2] [FB:52] [ 2.613723] [drm:drm_mode_setcrtc] [CRTC:21] [ 2.613726] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1] [ 2.629265] clocksource: Switched to clocksource tsc [ 2.632838] [drm:drm_mode_setcrtc] [CRTC:21] [ 2.632842] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1] [ 2.717378] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 5.475781] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 5.585075] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 5.585084] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 5.675264] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 5.852904] random: nonblocking pool is initialized [ 12.526273] audit_printk_skb: 12 callbacks suppressed [ 12.526276] audit: type=1130 audit(1437593136.306:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2dbff430b5\x2d9876\x2d4c7c\x2db281\x2dcc029ed13bb7 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 12.942074] audit: type=1130 audit(1437593136.722:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2dc412ac6c\x2d38bb\x2d4b59\x2dafb3\x2d275a839a20ba comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 12.956058] audit: type=1130 audit(1437593136.736:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.284782] audit: type=1130 audit(1437593137.065:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.296780] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 13.328106] audit: type=1130 audit(1437593137.108:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.328119] audit: type=1131 audit(1437593137.108:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.450436] audit: type=1130 audit(1437593137.230:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.455294] audit: type=1130 audit(1437593137.235:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.455318] audit: type=1131 audit(1437593137.235:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.455700] audit: type=1130 audit(1437593137.235:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 13.486078] systemd-journald[165]: Received SIGTERM from PID 1 (systemd). [ 13.551605] SELinux: 32768 avtab hash slots, 106273 rules. [ 13.562386] SELinux: 32768 avtab hash slots, 106273 rules. [ 13.578810] SELinux: 8 users, 105 roles, 5013 types, 302 bools, 1 sens, 1024 cats [ 13.578813] SELinux: 83 classes, 106273 rules [ 13.581225] SELinux: Class netlink_iscsi_socket not defined in policy. [ 13.581228] SELinux: Class netlink_fib_lookup_socket not defined in policy. [ 13.581229] SELinux: Class netlink_connector_socket not defined in policy. [ 13.581229] SELinux: Class netlink_netfilter_socket not defined in policy. [ 13.581232] SELinux: Class netlink_generic_socket not defined in policy. [ 13.581233] SELinux: Class netlink_scsitransport_socket not defined in policy. [ 13.581234] SELinux: Class netlink_rdma_socket not defined in policy. [ 13.581234] SELinux: Class netlink_crypto_socket not defined in policy. [ 13.581239] SELinux: Permission audit_read in class capability2 not defined in policy. [ 13.581241] SELinux: Class binder not defined in policy. [ 13.581242] SELinux: the above unknown classes and permissions will be allowed [ 13.581245] SELinux: Completing initialization. [ 13.581246] SELinux: Setting up existing superblocks. [ 13.590194] systemd[1]: Successfully loaded SELinux policy in 59.626ms. [ 13.613870] systemd[1]: Relabelled /dev and /run in 11.842ms. [ 13.714586] EXT4-fs (dm-1): re-mounted. Opts: discard [ 13.908177] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=852/852 [ 13.908180] [drm:intel_panel_actually_set_backlight] set backlight PWM = 852 [ 13.919918] wmi: Mapper loaded [ 13.946468] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 13.946896] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 13.946899] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 13.946900] thinkpad_acpi: ThinkPad BIOS JBET50WW (1.15 ), EC unknown [ 13.946902] thinkpad_acpi: Lenovo ThinkPad T450s, model 20BX000TBM [ 13.948682] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net [ 13.948708] thinkpad_acpi: radio switch found; radios are enabled [ 13.948723] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 13.948724] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 13.950945] systemd-journald[639]: Received request to flush runtime journal from PID 1 [ 13.954137] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 13.971279] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 13.998219] tpm_tis 00:05: TPM is disabled/deactivated (0x6) [ 14.035957] cfg80211: Calling CRDA to update world regulatory domain [ 14.036748] iTCO_vendor_support: vendor-support=0 [ 14.060389] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 14.060420] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 14.060497] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.077565] cfg80211: World regulatory domain updated: [ 14.077568] cfg80211: DFS Master region: unset [ 14.077569] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.077572] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.077573] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.077574] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 14.077575] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 14.077577] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 14.077578] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 14.077579] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 14.077580] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 14.146655] Intel(R) Wireless WiFi driver for Linux [ 14.146658] Copyright(c) 2003- 2015 Intel Corporation [ 14.208741] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2 [ 14.208759] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-14.ucode failed with error -2 [ 14.208770] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2 [ 14.212908] iwlwifi 0000:03:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm [ 14.275761] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_exit [i915]) [ 14.286149] Adding 2097148k swap on /dev/mapper/luks-bff430b5-9876-4c7c-b281-cc029ed13bb7. Priority:-1 extents:1 across:2097148k SSFS [ 14.289427] [drm:intel_display_power_get] enabling display [ 14.289431] [drm:hsw_set_power_well] Enabling power well [ 14.316267] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 14.316342] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 14.316408] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 14.323258] intel_rapl: Found RAPL domain package [ 14.323263] intel_rapl: Found RAPL domain core [ 14.323265] intel_rapl: Found RAPL domain uncore [ 14.323267] intel_rapl: Found RAPL domain dram [ 14.329027] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 14.329031] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.329033] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 14.329035] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 14.329036] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 14.329038] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 14.329040] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 14.329042] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 14.352924] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 14.353032] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 14.353094] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 14.353153] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 14.456215] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard [ 14.515525] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 14.515897] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 14.521331] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 14.592567] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 14.595759] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 18.478589] audit_printk_skb: 156 callbacks suppressed [ 18.478592] audit: type=1130 audit(1437593142.255:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-cryptsetup@luks\x2dd66d733c\x2d4fbb\x2d4e80\x2d933f\x2de68d450cebd7 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.491875] audit: type=1130 audit(1437593142.268:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-luks\x2dd66d733c\x2d4fbb\x2d4e80\x2d933f\x2de68d450cebd7 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.501456] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard [ 18.511526] audit: type=1130 audit(1437593142.288:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.511886] audit: type=1130 audit(1437593142.288:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.521374] audit: type=1130 audit(1437593142.298:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.521393] audit: type=1131 audit(1437593142.298:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.528366] audit: type=1130 audit(1437593142.305:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.551059] audit: type=1130 audit(1437593142.328:84): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.556891] audit: type=1305 audit(1437593142.333:85): auid=4294967295 ses=4294967295 subj=system_u:system_r:auditctl_t:s0 op="add_rule" key=(null) list=1 res=1 [ 18.557780] audit: type=1130 audit(1437593142.334:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 18.647428] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.667913] RPC: Registered named UNIX socket transport module. [ 18.667916] RPC: Registered udp transport module. [ 18.667916] RPC: Registered tcp transport module. [ 18.667917] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.700134] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 18.859258] Bluetooth: Core ver 2.20 [ 18.859338] NET: Registered protocol family 31 [ 18.859341] Bluetooth: HCI device and connection manager initialized [ 18.859344] Bluetooth: HCI socket layer initialized [ 18.859345] Bluetooth: L2CAP socket layer initialized [ 18.859355] Bluetooth: SCO socket layer initialized [ 18.880652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.880653] Bluetooth: BNEP filters: protocol multicast [ 18.880656] Bluetooth: BNEP socket layer initialized [ 18.964778] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 18.986407] [drm:i915_gem_open] [ 19.008789] [drm:i915_gem_open] [ 19.008830] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 19.010378] [drm:i915_gem_open] [ 19.010412] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 19.010415] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 19.011743] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 19.011794] [drm:drm_mode_addfb2] [FB:52] [ 19.012115] [drm:internal_framebuffer_create] could not create framebuffer [ 19.012120] [drm:internal_framebuffer_create] could not create framebuffer [ 19.012167] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 19.012170] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[9] [ 19.012249] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 19.012307] [drm:drm_mode_getconnector] [CONNECTOR:32:?] [ 19.075454] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 19.075465] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 19.075497] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 19.075499] [drm:drm_mode_getconnector] [CONNECTOR:44:?] [ 19.075523] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 19.075525] [drm:drm_mode_getconnector] [CONNECTOR:47:?] [ 19.075547] [drm:drm_mode_getconnector] [CONNECTOR:51:?] [ 19.075549] [drm:drm_mode_getconnector] [CONNECTOR:51:?] [ 19.137362] [drm:drm_mode_addfb2] [FB:52] [ 19.233837] [drm:drm_mode_setcrtc] [CRTC:21] [ 19.233841] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1] [ 19.253555] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 19.255812] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 19.256682] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 19.262070] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 19.322877] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 19.328353] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 19.355550] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 19.439420] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 19.723528] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 19.745104] tun: Universal TUN/TAP device driver, 1.6 [ 19.745106] tun: (C) 1999-2004 Max Krasnyansky [ 19.779587] device virbr0-nic entered promiscuous mode [ 19.891546] virbr0: port 1(virbr0-nic) entered listening state [ 19.891556] virbr0: port 1(virbr0-nic) entered listening state [ 19.925132] virbr0: port 1(virbr0-nic) entered disabled state [ 22.848955] wlp3s0: authenticate with e8:94:f6:bf:cb:f0 [ 22.859044] wlp3s0: send auth to e8:94:f6:bf:cb:f0 (try 1/3) [ 22.861334] wlp3s0: authenticated [ 22.861650] wlp3s0: associate with e8:94:f6:bf:cb:f0 (try 1/3) [ 22.865719] wlp3s0: RX AssocResp from e8:94:f6:bf:cb:f0 (capab=0x431 status=0 aid=1) [ 22.866672] wlp3s0: associated [ 22.866798] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 27.996809] Adjusting tsc more than 11% (7516263 vs 7179153)