[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-rc5-default+ (oneukum@linux-dtbq.site) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP Tue Oct 13 23:02:37 CEST 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-rc5-default+ root=UUID=d1eec7b3-018d-44f9-93ca-63021a64a90c resume=/dev/disk/by-uuid/f063164f-9105-4ad0-9cc1-51a89657b5f2 splash=silent quiet showopts nouveau.debug=BARCTL=debug,DEVINIT=debug,PBUS=debug,PIBUS=debug drm.debug=14 [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ab7efff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ab7f000-0x000000003be7efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003be7f000-0x000000003bf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003bf7f000-0x000000003bffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003bfff000-0x000000003bffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003c000000-0x000000004f1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000006aedfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8780w/190A, BIOS L70 Ver. 93.01 05/17/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x6aee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back [ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back [ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back [ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back [ 0.000000] 7 base 0400000000 mask 7E00000000 write-back [ 0.000000] 8 base 0600000000 mask 7F80000000 write-back [ 0.000000] 9 base 0680000000 mask 7FC0000000 write-back [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x3c000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01f81000, 0x01f81fff] PGTABLE [ 0.000000] BRK [0x01f82000, 0x01f82fff] PGTABLE [ 0.000000] BRK [0x01f83000, 0x01f83fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x6aec00000-0x6aedfffff] [ 0.000000] [mem 0x6aec00000-0x6aedfffff] page 2M [ 0.000000] BRK [0x01f84000, 0x01f84fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x6a0000000-0x6aebfffff] [ 0.000000] [mem 0x6a0000000-0x6aebfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x680000000-0x69fffffff] [ 0.000000] [mem 0x680000000-0x69fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3ab7efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3a9fffff] page 2M [ 0.000000] [mem 0x3aa00000-0x3ab7efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3bfff000-0x3bffffff] [ 0.000000] [mem 0x3bfff000-0x3bffffff] page 4k [ 0.000000] BRK [0x01f85000, 0x01f85fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x67fffffff] [ 0.000000] [mem 0x100000000-0x67fffffff] page 1G [ 0.000000] RAMDISK: [mem 0x36cbc000-0x37655fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x000000003BFFE120 0000A4 (v01 HPQOEM SLIC-MPC 0000005D 01000013) [ 0.000000] ACPI: FACP 0x000000003BFFC000 00010C (v05 HPQOEM 190A 0000005D HP 00000001) [ 0.000000] ACPI: DSDT 0x000000003BFD2000 02432F (v02 HPQOEM 190A 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x000000003BE31000 000040 [ 0.000000] ACPI: FACS 0x000000003BE31000 000040 [ 0.000000] ACPI: HPET 0x000000003BFFB000 000038 (v01 HPQOEM 190A 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x000000003BFFA000 0000BC (v01 HPQOEM 190A 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x000000003BFF9000 00003C (v01 HPQOEM 190A 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x000000003BFF7000 000032 (v02 HPQOEM 190A 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x000000003BFCF000 00045D (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x000000003BFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: FPDT 0x000000003BFCC000 000044 (v01 HPQOEM 190A 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x000000003BFCB000 000038 (v00 HPQOEM 190A 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x000000003BFC5000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x000000003BFC4000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x000000003BFC3000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x000000003BFC2000 00019F (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x000000003BFBF000 002E99 (v01 HP NVSGTBL 00001000 INTL 20110112) [ 0.000000] ACPI: ASF! 0x000000003BFF8000 0000A5 (v32 HPQOEM 190A 00000001 HP 00000001) [ 0.000000] ACPI: DMAR 0x000000003BFBE000 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000006aedfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x6aedd9000-0x6aedfefff] [ 0.000000] [ffffea0000000000-ffffea001abfffff] PMD -> [ffff880696800000-ffff8806ae3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000006aedfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ab7efff] [ 0.000000] node 0: [mem 0x000000003bfff000-0x000000003bffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000006aedfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000006aedfffff] [ 0.000000] On node 0 totalpages: 6199580 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3694 pages used for memmap [ 0.000000] DMA32 zone: 236416 pages, LIFO batch:31 [ 0.000000] Normal zone: 93112 pages used for memmap [ 0.000000] Normal zone: 5959168 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x47200000-0x4f1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ab7f000-0x3be7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x3be7f000-0x3bf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bf7f000-0x3bffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x3c000000-0x4f1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8806aea00000 s88856 r8192 d29928 u262144 [ 0.000000] pcpu-alloc: s88856 r8192 d29928 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 6102689 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-rc5-default+ root=UUID=d1eec7b3-018d-44f9-93ca-63021a64a90c resume=/dev/disk/by-uuid/f063164f-9105-4ad0-9cc1-51a89657b5f2 splash=silent quiet showopts nouveau.debug=BARCTL=debug,DEVINIT=debug,PBUS=debug,PIBUS=debug drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 24315928K/24798320K available (5806K kernel code, 1275K rwdata, 2972K rodata, 1904K init, 2424K bss, 482392K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:524544 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 2693.906 MHz processor [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.81 BogoMIPS (lpj=10775624) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20150818 [ 0.020559] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.020577] Security Framework initialized [ 0.020581] AppArmor: AppArmor initialized [ 0.022650] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.027768] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.029920] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.029950] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.030222] Initializing cgroup subsys io [ 0.030227] Initializing cgroup subsys memory [ 0.030233] Initializing cgroup subsys devices [ 0.030235] Initializing cgroup subsys freezer [ 0.030237] Initializing cgroup subsys net_cls [ 0.030239] Initializing cgroup subsys perf_event [ 0.030241] Initializing cgroup subsys hugetlb [ 0.030242] Initializing cgroup subsys pids [ 0.030266] CPU: Physical Processor ID: 0 [ 0.030267] CPU: Processor Core ID: 0 [ 0.030271] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.030272] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.031101] mce: CPU supports 9 MCE banks [ 0.031115] CPU0: Thermal monitoring enabled (TM1) [ 0.031123] process: using mwait in idle threads [ 0.031126] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.031126] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.031408] Freeing SMP alternatives memory: 20K (ffffffff81d1c000 - ffffffff81d21000) [ 0.032403] ftrace: allocating 23634 entries in 93 pages [ 0.040754] DMAR: Host address width 39 [ 0.040756] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.040761] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.040762] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.040765] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.040766] DMAR: RMRR base: 0x0000003bd18000 end: 0x0000003bd37fff [ 0.040768] DMAR: RMRR base: 0x00000047000000 end: 0x0000004f1fffff [ 0.040769] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.040770] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.040771] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.041028] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.041029] x2apic enabled [ 0.041034] Switched APIC routing to cluster x2apic. [ 0.041455] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081131] TSC deadline timer enabled [ 0.081134] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.081156] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.081173] ... version: 3 [ 0.081173] ... bit width: 48 [ 0.081174] ... generic registers: 4 [ 0.081175] ... value mask: 0000ffffffffffff [ 0.081175] ... max period: 0000ffffffffffff [ 0.081176] ... fixed-purpose events: 3 [ 0.081177] ... event mask: 000000070000000f [ 0.081650] x86: Booting SMP configuration: [ 0.081652] .... node #0, CPUs: #1 #2 [ 0.086236] microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.089234] #3 [ 0.092494] #4 [ 0.093780] microcode: CPU4 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.096794] #5 [ 0.100073] #6 [ 0.101360] microcode: CPU6 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.104388] #7 [ 0.107614] x86: Booted up 1 node, 8 CPUs [ 0.107616] smpboot: Total of 8 processors activated (43102.49 BogoMIPS) [ 0.114291] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.114463] devtmpfs: initialized [ 0.118109] evm: security.selinux [ 0.118110] evm: security.ima [ 0.118111] evm: security.capability [ 0.118164] PM: Registering ACPI NVS region [mem 0x3be7f000-0x3bf7efff] (1048576 bytes) [ 0.118267] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.118348] pinctrl core: initialized pinctrl subsystem [ 0.118391] RTC time: 9:17:38, date: 10/14/15 [ 0.118497] NET: Registered protocol family 16 [ 0.130230] cpuidle: using governor ladder [ 0.154233] cpuidle: using governor menu [ 0.154301] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.154303] ACPI: bus type PCI registered [ 0.154304] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.154383] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.154385] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.154394] PCI: Using configuration type 1 for base access [ 0.154877] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.154880] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.154880] mtrr: probably your BIOS does not setup all CPUs. [ 0.154881] mtrr: corrected configuration. [ 0.178559] ACPI: Added _OSI(Module Device) [ 0.178560] ACPI: Added _OSI(Processor Device) [ 0.178561] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.178562] ACPI: Added _OSI(Processor Aggregator Device) [ 0.192129] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.195987] ACPI: Dynamic OEM Table Load: [ 0.195995] ACPI: SSDT 0xFFFF8806924A0800 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.196783] ACPI: Dynamic OEM Table Load: [ 0.196789] ACPI: SSDT 0xFFFF880692476000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.197644] ACPI: Dynamic OEM Table Load: [ 0.197649] ACPI: SSDT 0xFFFF88069249EC00 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.199946] ACPI : EC: EC started [ 2.212298] ACPI: Interpreter enabled [ 2.212306] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 2.212311] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580) [ 2.212325] ACPI: (supports S0 S3 S4 S5) [ 2.212326] ACPI: Using IOAPIC for interrupt routing [ 2.212349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.214882] ACPI: Power Resource [APPR] (off) [ 2.218494] ACPI: Power Resource [COMP] (on) [ 2.218995] ACPI: Power Resource [LPP] (on) [ 2.223399] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 2.223404] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.225878] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 2.225880] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.226600] PCI host bridge to bus 0000:00 [ 2.226602] pci_bus 0000:00: root bus resource [bus 00-fe] [ 2.226604] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.226605] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.226607] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.226608] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff window] [ 2.226609] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 2.226610] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 2.226616] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 2.226746] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 2.226779] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.226951] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 2.226963] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit] [ 2.226968] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 2.226971] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f] [ 2.227128] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 2.227150] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit] [ 2.227197] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 2.227276] pci 0000:00:14.0: System wakeup disabled by ACPI [ 2.227316] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 2.227341] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit] [ 2.227393] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.227505] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 2.227527] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7] [ 2.227535] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff] [ 2.227698] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 2.227720] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff] [ 2.227728] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff] [ 2.227735] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f] [ 2.227780] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 2.227860] pci 0000:00:19.0: System wakeup disabled by ACPI [ 2.227900] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 2.227926] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff] [ 2.227995] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.228077] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.228118] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 2.228141] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit] [ 2.228200] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.228317] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 2.228384] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.228504] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 2.228572] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.228654] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 2.228694] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400 [ 2.228761] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 2.228843] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 2.228882] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400 [ 2.228948] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 2.229031] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 2.229071] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 2.229096] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff] [ 2.229170] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.229252] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.229291] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100 [ 2.229494] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 2.229513] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af] [ 2.229520] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf] [ 2.229527] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7] [ 2.229534] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb] [ 2.229541] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f] [ 2.229548] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff] [ 2.229580] pci 0000:00:1f.2: PME# supported from D3hot [ 2.229692] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 2.229707] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit] [ 2.229725] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 2.229902] pci 0000:01:00.0: [10de:11b6] type 00 class 0x030000 [ 2.229926] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff] [ 2.229937] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref] [ 2.229947] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref] [ 2.229954] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f] [ 2.229960] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 2.230300] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 2.230326] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff] [ 2.230456] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.230458] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 2.230460] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff] [ 2.230463] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref] [ 2.230528] pci 0000:00:1c.0: PCI bridge to [bus 02-3a] [ 2.230533] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff] [ 2.230539] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref] [ 2.230639] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b] [ 2.230643] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff] [ 2.230646] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff] [ 2.230760] pci 0000:5c:00.0: [8086:0082] type 00 class 0x028000 [ 2.230859] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit] [ 2.231128] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold [ 2.238939] pci 0000:00:1c.6: PCI bridge to [bus 5c] [ 2.238944] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff] [ 2.238993] pci 0000:00:1c.7: PCI bridge to [bus 5d] [ 2.238999] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff] [ 2.240589] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.240662] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.240734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.240805] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 2.240870] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 2.240940] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.241012] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 2.241083] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.241432] ACPI: Enabled 7 GPEs in block 00 to 3F [ 2.241472] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 2.241532] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 2.241534] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.241538] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 2.241538] vgaarb: loaded [ 2.241539] vgaarb: bridge control possible 0000:01:00.0 [ 2.241540] vgaarb: no bridge control possible 0000:00:02.0 [ 2.241634] PCI: Using ACPI for IRQ routing [ 2.247250] PCI: pci_cache_line_size set to 64 bytes [ 2.247349] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 2.247350] e820: reserve RAM buffer [mem 0x3ab7f000-0x3bffffff] [ 2.247351] e820: reserve RAM buffer [mem 0x6aee00000-0x6afffffff] [ 2.247449] NetLabel: Initializing [ 2.247450] NetLabel: domain hash size = 128 [ 2.247451] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.247461] NetLabel: unlabeled traffic allowed by default [ 2.247499] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.247503] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.249539] clocksource: Switched to clocksource hpet [ 2.254037] AppArmor: AppArmor Filesystem Enabled [ 2.254088] pnp: PnP ACPI init [ 2.254304] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.254306] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 2.254307] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.254309] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.254310] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 2.254311] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.254313] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved [ 2.254314] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.254316] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.254318] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.254662] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 2.254755] system 00:02: [io 0x0200-0x027f] has been reserved [ 2.254757] system 00:02: [io 0xffff] has been reserved [ 2.254758] system 00:02: [io 0xffff] has been reserved [ 2.254759] system 00:02: [io 0xffff] has been reserved [ 2.254761] system 00:02: [io 0x1800-0x18fe] could not be reserved [ 2.254762] system 00:02: [io 0xef80-0xef9f] has been reserved [ 2.254764] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.254815] system 00:03: [io 0x0800-0x087f] has been reserved [ 2.254817] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.254839] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.255386] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 2.255849] pnp 00:06: [dma 0 disabled] [ 2.255907] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) [ 2.255929] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 2.255950] pnp 00:08: Plug and Play ACPI device, IDs SYN3001 SYN0100 SYN0002 PNP0f13 (active) [ 2.256317] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved [ 2.256318] system 00:09: [mem 0x40004000-0x40004fff] has been reserved [ 2.256320] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.256609] pnp: PnP ACPI: found 10 devices [ 2.263160] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.263165] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 2.263182] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000 [ 2.263190] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000 add_align 100000 [ 2.263204] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000 [ 2.263206] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000 add_align 100000 [ 2.263210] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 2.263211] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 2.263213] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 2.263214] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 2.263215] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 2.263217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 2.263218] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 2.263219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 2.263225] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f200000-0x4f3fffff 64bit pref] [ 2.263228] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f400000-0x4f5fffff 64bit pref] [ 2.263230] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 2.263231] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff] [ 2.263234] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref] [ 2.263235] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.263237] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 2.263240] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff] [ 2.263242] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref] [ 2.263245] pci 0000:00:1c.0: PCI bridge to [bus 02-3a] [ 2.263252] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 2.263257] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff] [ 2.263260] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref] [ 2.263266] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b] [ 2.263268] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff] [ 2.263273] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff] [ 2.263276] pci 0000:00:1c.4: bridge window [mem 0x4f200000-0x4f3fffff 64bit pref] [ 2.263281] pci 0000:00:1c.6: PCI bridge to [bus 5c] [ 2.263286] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff] [ 2.263293] pci 0000:00:1c.7: PCI bridge to [bus 5d] [ 2.263295] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff] [ 2.263299] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff] [ 2.263303] pci 0000:00:1c.7: bridge window [mem 0x4f400000-0x4f5fffff 64bit pref] [ 2.263309] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.263310] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.263312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.263313] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff window] [ 2.263314] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 2.263315] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 2.263316] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 2.263317] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff] [ 2.263319] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref] [ 2.263320] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 2.263321] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff] [ 2.263322] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref] [ 2.263323] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff] [ 2.263324] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff] [ 2.263326] pci_bus 0000:3b: resource 2 [mem 0x4f200000-0x4f3fffff 64bit pref] [ 2.263327] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff] [ 2.263328] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff] [ 2.263329] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff] [ 2.263330] pci_bus 0000:5d: resource 2 [mem 0x4f400000-0x4f5fffff 64bit pref] [ 2.263408] NET: Registered protocol family 2 [ 2.263636] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 2.263922] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.264034] TCP: Hash tables configured (established 262144 bind 65536) [ 2.264072] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 2.264156] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 2.264284] NET: Registered protocol family 1 [ 2.264298] pci 0000:00:02.0: Video device with shadowed ROM [ 2.264309] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 2.264450] PCI: CLS 64 bytes, default 64 [ 2.264489] Unpacking initramfs... [ 3.120356] Freeing initrd memory: 9832K (ffff880036cbc000 - ffff880037656000) [ 3.120415] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.120417] software IO TLB [mem 0x32cbc000-0x36cbc000] (64MB) mapped at [ffff880032cbc000-ffff880036cbbfff] [ 3.120477] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 3.120478] hw unit of domain pp0-core 2^-14 Joules [ 3.120478] hw unit of domain package 2^-14 Joules [ 3.120479] hw unit of domain dram 2^-14 Joules [ 3.120480] hw unit of domain pp1-gpu 2^-14 Joules [ 3.120551] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120558] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120565] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120572] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120578] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120586] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120593] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120597] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x1c [ 3.120648] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 3.120670] Scanning for low memory corruption every 60 seconds [ 3.120956] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 3.121002] audit: initializing netlink subsys (disabled) [ 3.121015] audit: type=2000 audit(1444814261.116:1): initialized [ 3.121238] Initialise system trusted keyring [ 3.121330] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.121359] zbud: loaded [ 3.121524] VFS: Disk quotas dquot_6.6.0 [ 3.121548] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.122235] Key type asymmetric registered [ 3.122238] Asymmetric key parser 'x509' registered [ 3.122253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.122292] io scheduler noop registered [ 3.122295] io scheduler deadline registered [ 3.122317] io scheduler cfq registered (default) [ 3.123976] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.123978] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.123979] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 3.123981] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.124005] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 3.124008] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 3.124027] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 3.124030] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 3.124049] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt [ 3.124050] pci 0000:5c:00.0: Signaling PME through PCIe PME interrupt [ 3.124053] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded [ 3.124072] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt [ 3.124075] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded [ 3.124081] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.124097] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 3.124134] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 3.124142] pciehp 0000:00:1c.4:pcie04: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 3.124162] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded [ 3.124174] pciehp 0000:00:1c.7:pcie04: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 3.124194] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded [ 3.124198] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.124218] vesafb: mode is 1600x900x32, linelength=6400, pages=0 [ 3.124219] vesafb: scrolling: redraw [ 3.124220] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.124232] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90003800000, using 5632k, total 5632k [ 3.231434] Console: switching to colour frame buffer device 200x56 [ 3.338326] fb0: VESA VGA frame buffer device [ 3.338343] intel_idle: MWAIT substates: 0x42120 [ 3.338344] intel_idle: v0.4 model 0x3C [ 3.338344] intel_idle: lapic_timer_reliable_states 0xffffffff [ 3.338707] GHES: HEST is not enabled! [ 3.338759] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 3.359163] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.380893] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A [ 3.381175] Non-volatile memory driver v1.3 [ 3.381228] Linux agpgart interface v0.103 [ 3.453151] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 3.754941] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.756134] i8042: Detected active multiplexing controller, rev 1.1 [ 3.756855] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.756859] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.756861] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.756862] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.756863] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.757136] mousedev: PS/2 mouse device common for all mice [ 3.757243] rtc_cmos 00:04: RTC can wake from S4 [ 3.757388] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 3.757428] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.757437] Intel P-state driver initializing. [ 3.757699] ledtrig-cpu: registered to indicate activity on CPUs [ 3.757745] hidraw: raw HID events driver (C) Jiri Kosina [ 3.758161] NET: Registered protocol family 10 [ 3.759942] registered taskstats version 1 [ 3.759984] Loading compiled-in X.509 certificates [ 3.762199] Loaded X.509 cert 'Build time autogenerated kernel key: 3ee752b93539bafcb5ec563735d2452b2e5f1bf8' [ 3.762264] zswap: loaded using pool lzo/zbud [ 3.767279] Key type trusted registered [ 3.775965] Key type encrypted registered [ 3.775980] AppArmor: AppArmor sha1 policy hashing enabled [ 3.783166] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.116967] tsc: Refined TSC clocksource calibration: 2693.766 MHz [ 4.116971] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d43d30def, max_idle_ns: 440795207857 ns [ 4.504864] evm: HMAC attrs: 0x1 [ 4.505756] Magic number: 3:748:272 [ 4.505911] PM: Checking hibernation image partition /dev/disk/by-uuid/f063164f-9105-4ad0-9cc1-51a89657b5f2 [ 4.907647] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input6 [ 5.116767] clocksource: Switched to clocksource tsc [ 5.350253] psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730] [ 5.385653] psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..] [ 5.447309] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26800/0x0, board id: 2706, fw id: 1459558 [ 5.487115] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7 [ 5.490815] PM: Hibernation image not present or could not be loaded. [ 5.491162] Freeing unused kernel memory: 1904K (ffffffff81b40000 - ffffffff81d1c000) [ 5.491163] Write protecting the kernel read-only data: 10240k [ 5.491330] Freeing unused kernel memory: 328K (ffff8800015ae000 - ffff880001600000) [ 5.491476] Freeing unused kernel memory: 1124K (ffff8800018e7000 - ffff880001a00000) [ 5.492660] random: systemd urandom read with 15 bits of entropy available [ 5.493476] autofs4: module verification failed: signature and/or required key missing - tainting kernel [ 5.528217] systemd-journald[146]: Failed to set file attributes: Inappropriate ioctl for device [ 5.528735] SCSI subsystem initialized [ 5.624054] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9 [ 5.624094] ACPI: Sleep Button [SLPB] [ 5.624144] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10 [ 5.624207] ACPI: Lid Switch [LID] [ 5.624261] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11 [ 5.624309] ACPI: Power Button [PWRF] [ 5.625132] wmi: Mapper loaded [ 5.632544] ACPI: bus type USB registered [ 5.632574] usbcore: registered new interface driver usbfs [ 5.632586] usbcore: registered new interface driver hub [ 5.632599] [drm] Initialized drm 1.1.0 20060810 [ 5.632614] usbcore: registered new device driver usb [ 5.633262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.633403] libata version 3.00 loaded. [ 5.633408] ehci-pci: EHCI PCI platform driver [ 5.633596] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.633602] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.633618] ehci-pci 0000:00:1a.0: debug port 2 [ 5.637517] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 5.637546] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000 [ 5.648322] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.648393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.648396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.648397] usb usb1: Product: EHCI Host Controller [ 5.648399] usb usb1: Manufacturer: Linux 4.3.0-rc5-default+ ehci_hcd [ 5.648400] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.648523] hub 1-0:1.0: USB hub found [ 5.648532] hub 1-0:1.0: 3 ports detected [ 5.648884] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.648889] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.648904] ehci-pci 0000:00:1d.0: debug port 2 [ 5.652794] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 5.652806] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000 [ 5.664368] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.664705] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.664707] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.664709] usb usb2: Product: EHCI Host Controller [ 5.664710] usb usb2: Manufacturer: Linux 4.3.0-rc5-default+ ehci_hcd [ 5.664722] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.664953] hub 2-0:1.0: USB hub found [ 5.664980] hub 2-0:1.0: 3 ports detected [ 5.665594] ahci 0000:00:1f.2: version 3.0 [ 5.665773] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 5.665806] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.665808] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 5.704958] scsi host0: ahci [ 5.705063] scsi host1: ahci [ 5.705143] scsi host2: ahci [ 5.705261] scsi host3: ahci [ 5.705351] scsi host4: ahci [ 5.705467] scsi host5: ahci [ 5.705513] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 31 [ 5.705516] ata2: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38180 irq 31 [ 5.705518] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 31 [ 5.705520] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 31 [ 5.705522] ata5: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38300 irq 31 [ 5.705525] ata6: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38380 irq 31 [ 5.706051] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0416 rev=0x06 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 5.706065] [drm:intel_detect_pch] Found LynxPoint PCH [ 5.706138] [drm] Memory usable by graphics device = 2048M [ 5.706140] [drm:i915_gem_gtt_init] GMADR size = 256M [ 5.706141] [drm:i915_gem_gtt_init] GTT stolen size = 128M [ 5.706141] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 5.706143] checking generic (a0000000 580000) vs hw (a0000000 10000000) [ 5.706144] fb: switching to inteldrmfb from VESA VGA [ 5.706165] Console: switching to colour dummy device 80x25 [ 5.706225] [drm] Replacing VGA console driver [ 5.706490] [drm:intel_opregion_setup] graphic opregion physical addr: 0x3bf64018 [ 5.706495] [drm:intel_opregion_setup] Public ACPI methods supported [ 5.706496] [drm:intel_opregion_setup] SWSCI supported [ 5.712306] [drm:swsci_setup] SWSCI BIOS requested (00000081) SBCB callbacks that are not supported (00200101) [ 5.712308] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00000081 [ 5.712309] [drm:intel_opregion_setup] ASLE supported [ 5.712513] [drm:intel_device_info_runtime_init] slice total: 0 [ 5.712514] [drm:intel_device_info_runtime_init] subslice total: 0 [ 5.712515] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 5.712516] [drm:intel_device_info_runtime_init] EU total: 0 [ 5.712516] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 5.712517] [drm:intel_device_info_runtime_init] has slice power gating: n [ 5.712518] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 5.712519] [drm:intel_device_info_runtime_init] has EU power gating: n [ 5.712520] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.712521] [drm] Driver supports precise vblank timestamp query. [ 5.712522] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 5.712523] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL d [ 5.712525] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 5.712526] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 5.712528] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 5.712529] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 5.712531] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 0 107800 1600 1648 1680 1940 900 903 908 926 0x8 0xa [ 5.712532] [drm:parse_lfp_panel_data] VBT initial LVDS value 20033c [ 5.712534] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 5.712535] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 5.712537] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 5.712538] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 5.712539] [drm:parse_driver_features] DRRS State Enabled:1 [ 5.712541] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 5.712542] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 5.712568] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 5.712794] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 5.712797] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 131072K, usable: 130048K [ 5.712799] [drm:intel_power_well_enable] enabling always-on [ 5.712799] [drm:intel_power_well_enable] enabling display [ 5.712855] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 5.712856] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 5.712857] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 5.712858] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 5.712859] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 5.712860] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 5.712861] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 5.712862] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 5.712863] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 5.712863] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 5.712864] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 5.712865] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 5.712866] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 5.712867] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 5.712868] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 5.712869] [drm:intel_modeset_init] 3 display pipes available. [ 5.712881] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz [ 5.712882] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz [ 5.712883] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz [ 5.712886] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.713241] [drm:intel_crt_reset] crt adpa set to 0xf40000 [ 5.713245] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 5.713282] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 5.713283] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 5.713284] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 5.713285] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 5.713286] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 5.713326] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 5.713333] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 5.714300] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00 [ 5.715159] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 5.715161] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 5.715163] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 5.715164] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 5.715172] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x186906 [ 5.720409] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.720411] [drm:intel_dp_drrs_init] seamless DRRS supported for eDP panel. [ 5.720421] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 5273/5273 [ 5.793957] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled [ 5.793958] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled [ 5.793960] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled [ 5.793961] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 5.793963] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 5.793964] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DAC-32] hw state readout: disabled, pipe A [ 5.793968] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: enabled, pipe A [ 5.793970] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:eDP-1] hw state readout: enabled [ 5.793971] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:VGA-1] hw state readout: disabled [ 5.793979] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff88068fc6b800 for pipe A [ 5.793979] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 5.793980] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 5.793981] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.793983] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 3777285, gmch_n: 8388608, link_m: 209849, link_n: 524288, tu: 64 [ 5.793984] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.793985] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.793985] [drm:intel_dump_pipe_config] requested mode: [ 5.793987] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 108068 1600 1648 1680 1940 900 903 908 926 0x40 0x5 [ 5.793988] [drm:intel_dump_pipe_config] adjusted mode: [ 5.793990] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 108068 1600 1648 1680 1940 900 903 908 926 0x40 0x5 [ 5.793991] [drm:intel_dump_crtc_timings] crtc timings: 108068 1600 1648 1680 1940 900 903 908 926, type: 0x40 flags: 0x5 [ 5.793992] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.793993] [drm:intel_dump_pipe_config] pipe src size: 1600x900 [ 5.793994] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5.793995] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.793996] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x06400384, enabled [ 5.793997] [drm:intel_dump_pipe_config] ips: 0 [ 5.793997] [drm:intel_dump_pipe_config] double wide: 0 [ 5.793999] [drm:intel_dump_pipe_config] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 [ 5.793999] [drm:intel_dump_pipe_config] planes on this crtc [ 5.794001] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 5.794002] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 5.794003] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5.794004] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff88068e7b9400 for pipe B [ 5.794005] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.794006] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5.794007] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.794008] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.794009] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.794010] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.794011] [drm:intel_dump_pipe_config] requested mode: [ 5.794012] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.794013] [drm:intel_dump_pipe_config] adjusted mode: [ 5.794014] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.794015] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5.794016] [drm:intel_dump_pipe_config] port clock: 0 [ 5.794017] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5.794018] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5.794019] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.794020] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.794021] [drm:intel_dump_pipe_config] ips: 0 [ 5.794021] [drm:intel_dump_pipe_config] double wide: 0 [ 5.794022] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 [ 5.794023] [drm:intel_dump_pipe_config] planes on this crtc [ 5.794024] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0 [ 5.794025] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0 [ 5.794026] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0 [ 5.794028] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff88068e7b2400 for pipe C [ 5.794028] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 5.794029] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5.794030] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.794031] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.794032] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.794033] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.794034] [drm:intel_dump_pipe_config] requested mode: [ 5.794035] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.794036] [drm:intel_dump_pipe_config] adjusted mode: [ 5.794037] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.794038] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5.794039] [drm:intel_dump_pipe_config] port clock: 0 [ 5.794040] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5.794041] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5.794042] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.794043] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.794043] [drm:intel_dump_pipe_config] ips: 0 [ 5.794044] [drm:intel_dump_pipe_config] double wide: 0 [ 5.794045] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 [ 5.794045] [drm:intel_dump_pipe_config] planes on this crtc [ 5.794047] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0 [ 5.794048] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0 [ 5.794049] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0 [ 5.794055] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1600x900@32, offset=0, pitch 6400, size 0x57e400 [ 5.794056] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=57f000 [ 5.794059] [drm:i915_pages_create_for_stolen] offset=0x0, size=5763072 [ 5.794062] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88068e73fdc0 [ 5.794124] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 57f000 [ 5.794125] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [57f000, 7ffff000] [ 5.795160] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 [ 5.795698] [drm:i915_gem_context_init] HW context support initialized [ 5.795703] [drm:init_status_page] render ring hws offset: 0x00590000 [ 5.795733] [drm:intel_init_pipe_control] render ring pipe control offset: 0x005b1000 [ 5.795736] [drm:init_status_page] bsd ring hws offset: 0x005b2000 [ 5.795764] [drm:init_status_page] blitter ring hws offset: 0x005d3000 [ 5.795790] [drm:init_status_page] video enhancement ring hws offset: 0x005f4000 [ 5.797958] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz [ 5.798039] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 5.798040] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 5.798041] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 5.798042] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 5.798043] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 5.798044] [drm:intel_fbdev_init_bios] pipe A area: 1600x900, bpp: 32, size: 5760000 [ 5.798045] [drm:intel_fbdev_init_bios] fb big enough for plane A (5763072 >= 5760000) [ 5.798046] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 5.798047] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 5.798048] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 5.798081] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 5.798084] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 5.798310] [drm:intel_didl_outputs] 8 outputs detected [ 5.798957] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 5.799209] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no) [ 5.799558] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input12 [ 5.799818] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 5.801000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.801084] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] status updated from 3 to 1 [ 5.801093] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.801095] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 5.801097] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 5.801098] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 5.801099] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 5.801100] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 5.801107] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 5.801197] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13 [ 5.801251] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 5.810339] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 5.810341] [drm:intel_crt_detect] CRT not detected via hotplug [ 5.810522] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.810524] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 5.810733] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.810736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.810737] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.810738] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.811245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.811246] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.811247] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.811249] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] status updated from 3 to 2 [ 5.811252] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 5.811254] [drm:drm_setup_crtcs] [ 5.811255] [drm:drm_enable_connectors] connector 34 enabled? yes [ 5.811256] [drm:drm_enable_connectors] connector 31 enabled? no [ 5.811257] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 5.811259] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 5.811260] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1600x900 [ 5.811261] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 5.811262] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 21 (0,0) [ 5.811264] [drm:intelfb_create] re-using BIOS fb [ 5.811274] [drm:intelfb_create] allocated 1600x900 fb: 0x00000000, bo ffff88068e73fdc0 [ 5.811303] [drm:drm_fb_helper_hotplug_event] [ 5.811305] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 5.811306] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 5.811351] fbcon: inteldrmfb (fb0) is primary device [ 5.812176] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 5.813036] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 5.814305] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.814307] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 5.814308] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 5.814309] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 5.814309] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 5.814310] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 5.814312] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 5.814312] [drm:intel_crt_detect] CRT not detected via hotplug [ 5.814562] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.814563] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 5.814806] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 5.814807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.814808] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 5.814808] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 5.815325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 5.815326] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 5.815326] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 5.815327] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 5.815329] [drm:drm_setup_crtcs] [ 5.815330] [drm:drm_enable_connectors] connector 34 enabled? yes [ 5.815330] [drm:drm_enable_connectors] connector 31 enabled? no [ 5.815331] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 5.815331] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 5.815342] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1600x900 [ 5.815342] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 5.815343] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 21 (0,0) [ 5.815356] [drm:connected_sink_compute_bpp] [CONNECTOR:34:eDP-1] checking for sink bpp constrains [ 5.815356] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18 [ 5.815368] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 107800KHz [ 5.815369] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 5.815369] [drm:intel_dp_compute_config] DP link bw required 194040 available 432000 [ 5.815370] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 5.815372] [drm:intel_pipe_config_compare] mismatch in dp_m_n (expected tu 64 gmch 3777285/8388608 link 209849/524288, found tu 64, gmch 3767883/8388608 link 209326/524288) [ 5.815372] [drm:intel_pipe_config_compare] mismatch in has_drrs (expected 0, found 1) [ 5.815373] [drm:intel_pipe_config_compare] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_PVSYNC) (expected 4, found 0) [ 5.815374] [drm:intel_pipe_config_compare] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_NVSYNC) (expected 0, found 8) [ 5.815374] [drm:intel_pipe_config_compare] mismatch in ddi_pll_sel (expected 0x80000000, found 0x20000000) [ 5.815375] [drm:intel_pipe_config_compare] mismatch in dpll_hw_state.wrpll (expected 0x90280202, found 0x00000000) [ 5.815376] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff88068f9eb400 for pipe A [ 5.815376] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 5.815377] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5.815377] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.815378] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 3767883, gmch_n: 8388608, link_m: 209326, link_n: 524288, tu: 64 [ 5.815378] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 2511689, gmch_n2: 8388608, link_m2: 139538, link_n2: 524288, tu2: 64 [ 5.815379] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.815379] [drm:intel_dump_pipe_config] requested mode: [ 5.815380] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 5.815380] [drm:intel_dump_pipe_config] adjusted mode: [ 5.815381] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 5.815382] [drm:intel_dump_crtc_timings] crtc timings: 107800 1600 1648 1680 1940 900 903 908 926, type: 0x48 flags: 0x9 [ 5.815382] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.815383] [drm:intel_dump_pipe_config] pipe src size: 1600x900 [ 5.815383] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5.815384] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.815384] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.815384] [drm:intel_dump_pipe_config] ips: 0 [ 5.815385] [drm:intel_dump_pipe_config] double wide: 0 [ 5.815385] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 [ 5.815385] [drm:intel_dump_pipe_config] planes on this crtc [ 5.815386] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled [ 5.815387] [drm:intel_dump_pipe_config] FB:44, fb = 1600x900 format = 0x34325258 [ 5.815387] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0 [ 5.815388] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 5.815388] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 5.815395] [drm:set_no_fbc_reason] Disabling FBC: disabled per chip default [ 5.815397] [drm:intel_edp_backlight_off] [ 5.960254] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.976248] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 6.016232] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 6.016248] [drm:intel_disable_pipe] disabling pipe A [ 6.024244] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.024906] [drm:edp_panel_off] Turn eDP port A panel power off [ 6.024911] [drm:wait_panel_off] Wait for panel power off time [ 6.024914] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 6.024915] ata1.00: ATA-9: WDC WD10JPVX-00JC3T0, 01.01A01, max UDMA/133 [ 6.024917] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 6.025814] ata1.00: configured for UDMA/133 [ 6.026143] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-00J 1A01 PQ: 0 ANSI: 5 [ 6.026465] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.085120] [drm:wait_panel_status] Wait complete [ 6.085125] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 21 [ 6.085126] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 6.085131] [drm:intel_power_well_disable] disabling display [ 6.085132] [drm:hsw_set_power_well] Requesting to disable the power well [ 6.085144] [drm:edp_panel_on] Turn eDP port A panel power on [ 6.085146] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 6.092926] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 6.092928] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.093283] hub 1-1:1.0: USB hub found [ 6.093501] hub 1-1:1.0: 6 ports detected [ 6.108918] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 6.108919] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.109233] hub 2-1:1.0: USB hub found [ 6.109351] hub 2-1:1.0: 8 ports detected [ 6.344143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.345987] ata2.00: ATAPI: hp DVDRAM GU70N, U703, max UDMA/100 [ 6.348144] ata2.00: configured for UDMA/100 [ 6.349486] scsi 1:0:0:0: CD-ROM hp DVDRAM GU70N U703 PQ: 0 ANSI: 5 [ 6.357165] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.628039] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 6.668128] [drm:wait_panel_status] Wait complete [ 6.668133] [drm:wait_panel_on] Wait for panel power on [ 6.668136] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 6.676022] ata3: SATA link down (SStatus 0 SControl 300) [ 6.814094] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 6.814099] [drm:gen6_enable_rps] Overclocking supported. Max: 1300MHz, Overclock max: 1300MHz [ 6.884067] [drm:wait_panel_status] Wait complete [ 6.884077] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 6.884084] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 6.885979] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 6.885979] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 6.885980] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 6.887409] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 6.889136] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 6.889203] [drm:intel_enable_pipe] enabling pipe A [ 6.889635] [drm:intel_edp_backlight_on] [ 6.889636] [drm:intel_panel_enable_backlight] pipe A [ 6.889641] [drm:intel_panel_actually_set_backlight] set backlight PWM = 5273 [ 6.891902] [drm:intel_psr_enable] PSR not supported by this panel [ 6.906084] [drm:intel_connector_check_state] [CONNECTOR:34:eDP-1] [ 6.906086] [drm:check_encoder_state] [ENCODER:32:DAC-32] [ 6.906087] [drm:check_encoder_state] [ENCODER:33:TMDS-33] [ 6.906089] [drm:check_crtc_state] [CRTC:21] [ 6.906126] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in has_drrs (expected 1, found 0) [ 6.906127] ------------[ cut here ]------------ [ 6.906145] WARNING: CPU: 4 PID: 276 at drivers/gpu/drm/i915/intel_display.c:12724 intel_modeset_check_state+0x575/0x8e0 [i915]() [ 6.906145] pipe state doesn't match! [ 6.906154] Modules linked in: crc32c_intel(E) i915(E) i2c_algo_bit(E) ahci(E) libahci(E) drm_kms_helper(E) ehci_pci(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) ehci_hcd(E) fb_sys_fops(E) libata(E) usbcore(E) drm(E) usb_common(E) wmi(E) video(E) button(E) sg(E) scsi_mod(E) autofs4(E) [ 6.906155] CPU: 4 PID: 276 Comm: kworker/4:2 Tainted: G E 4.3.0-rc5-default+ #1 [ 6.906156] Hardware name: Hewlett-Packard HP EliteBook 8780w/190A, BIOS L70 Ver. 93.01 05/17/2013 [ 6.906161] Workqueue: events output_poll_execute [drm_kms_helper] [ 6.906163] ffffffffa0324900 ffff88068dc07b58 ffffffff812e3e26 ffff88068dc07ba0 [ 6.906163] ffff88068dc07b90 ffffffff810647a6 ffff88068f9eb400 ffff88003a52a000 [ 6.906164] ffff88068fecb350 ffff88068fc6b800 ffff88068f21cc00 ffff88068dc07bf0 [ 6.906165] Call Trace: [ 6.906169] [] dump_stack+0x44/0x5e [ 6.906172] [] warn_slowpath_common+0x86/0xc0 [ 6.906174] [] warn_slowpath_fmt+0x4c/0x50 [ 6.906189] [] intel_modeset_check_state+0x575/0x8e0 [i915] [ 6.906205] [] intel_atomic_commit+0x5d2/0x630 [i915] [ 6.906218] [] drm_atomic_commit+0x37/0x60 [drm] [ 6.906223] [] restore_fbdev_mode+0x2a3/0x2e0 [drm_kms_helper] [ 6.906227] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [ 6.906230] [] drm_fb_helper_set_par+0x2c/0x50 [drm_kms_helper] [ 6.906233] [] drm_fb_helper_hotplug_event+0xa2/0xf0 [drm_kms_helper] [ 6.906252] [] intel_fbdev_output_poll_changed+0x1e/0x30 [i915] [ 6.906255] [] drm_kms_helper_hotplug_event+0x27/0x30 [drm_kms_helper] [ 6.906258] [] output_poll_execute+0x6d/0x1d0 [drm_kms_helper] [ 6.906260] [] process_one_work+0x149/0x3e0 [ 6.906261] [] worker_thread+0x11a/0x460 [ 6.906264] [] ? __schedule+0x33d/0x8f0 [ 6.906265] [] ? max_active_store+0x60/0x60 [ 6.906266] [] kthread+0xc9/0xe0 [ 6.906268] [] ? kthread_park+0x60/0x60 [ 6.906269] [] ret_from_fork+0x3f/0x70 [ 6.906270] [] ? kthread_park+0x60/0x60 [ 6.906271] ---[ end trace 7473bcb2c73d3c7b ]--- [ 6.906272] [drm:intel_dump_pipe_config] [CRTC:21][hw state] config ffff88068fc6b800 for pipe A [ 6.906272] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 6.906273] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 6.906274] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 6.906275] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 3767883, gmch_n: 8388608, link_m: 209326, link_n: 524288, tu: 64 [ 6.906275] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 2511689, gmch_n2: 8388608, link_m2: 139538, link_n2: 524288, tu2: 64 [ 6.906276] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 6.906276] [drm:intel_dump_pipe_config] requested mode: [ 6.906278] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1600 0 0 0 900 0 0 0 0x0 0x0 [ 6.906279] [drm:intel_dump_pipe_config] adjusted mode: [ 6.906280] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9 [ 6.906281] [drm:intel_dump_crtc_timings] crtc timings: 107799 1600 1648 1680 1940 900 903 908 926, type: 0x0 flags: 0x9 [ 6.906281] [drm:intel_dump_pipe_config] port clock: 270000 [ 6.906282] [drm:intel_dump_pipe_config] pipe src size: 1600x900 [ 6.906282] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 6.906283] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 6.906284] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 6.906284] [drm:intel_dump_pipe_config] ips: 0 [ 6.906284] [drm:intel_dump_pipe_config] double wide: 0 [ 6.906285] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 [ 6.906285] [drm:intel_dump_pipe_config] planes on this crtc [ 6.906287] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled [ 6.906288] [drm:intel_dump_pipe_config] FB:44, fb = 1600x900 format = 0x34325258 [ 6.906288] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1600x900 dst (0, 0) 1600x900 [ 6.906289] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 6.906290] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 6.906291] [drm:intel_dump_pipe_config] [CRTC:21][sw state] config ffff88068f9eb400 for pipe A [ 6.906291] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 6.906291] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 6.906292] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 6.906293] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 3767883, gmch_n: 8388608, link_m: 209326, link_n: 524288, tu: 64 [ 6.906294] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 2511689, gmch_n2: 8388608, link_m2: 139538, link_n2: 524288, tu2: 64 [ 6.906294] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 6.906295] [drm:intel_dump_pipe_config] requested mode: [ 6.906296] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 6.906296] [drm:intel_dump_pipe_config] adjusted mode: [ 6.906297] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 6.906298] [drm:intel_dump_crtc_timings] crtc timings: 107800 1600 1648 1680 1940 900 903 908 926, type: 0x48 flags: 0x9 [ 6.906299] [drm:intel_dump_pipe_config] port clock: 270000 [ 6.906299] [drm:intel_dump_pipe_config] pipe src size: 1600x900 [ 6.906300] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 6.906300] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 6.906301] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 6.906301] [drm:intel_dump_pipe_config] ips: 0 [ 6.906301] [drm:intel_dump_pipe_config] double wide: 0 [ 6.906302] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 [ 6.906302] [drm:intel_dump_pipe_config] planes on this crtc [ 6.906303] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled [ 6.906304] [drm:intel_dump_pipe_config] FB:44, fb = 1600x900 format = 0x34325258 [ 6.906304] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1600x900 dst (0, 0) 1600x900 [ 6.906305] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 6.906306] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 6.906306] [drm:check_shared_dpll_state] WRPLL 1 [ 6.906307] [drm:check_shared_dpll_state] WRPLL 2 [ 6.906330] [drm:drm_fb_helper_hotplug_event] [ 6.906331] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 6.906332] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 6.907203] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 6.908060] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 6.909330] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 6.909332] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 6.909333] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 6.909334] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 6.909334] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 6.909335] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 6.909354] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 6.909354] [drm:intel_crt_detect] CRT not detected via hotplug [ 6.909581] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 6.909581] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 6.909802] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 6.909802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 6.909803] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 6.909804] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 6.910348] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 6.910349] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 6.910350] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 6.910351] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 6.910354] [drm:drm_setup_crtcs] [ 6.910356] [drm:drm_enable_connectors] connector 34 enabled? yes [ 6.910356] [drm:drm_enable_connectors] connector 31 enabled? no [ 6.910357] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 6.910358] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 6.910359] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1600x900 [ 6.910360] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 6.910361] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 21 (0,0) [ 6.910469] Console: switching to colour frame buffer device 200x56 [ 6.913201] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.995876] ata4: SATA link down (SStatus 0 SControl 300) [ 7.315796] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.316290] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 7.316380] ata5.00: ATA-8: TOSHIBA MK6476GSX, GS001C, max UDMA/100 [ 7.316383] ata5.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 7.316947] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 7.317039] ata5.00: configured for UDMA/100 [ 7.317274] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK6476GS 1C PQ: 0 ANSI: 5 [ 7.317493] scsi 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.635681] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.637764] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 7.637832] ata6.00: supports DRM functions and may not be fully accessible [ 7.637974] ata6.00: READ LOG DMA EXT failed, trying unqueued [ 7.638049] ata6.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 7.638052] ata6.00: ATA-9: Samsung SSD 840 EVO 250GB mSATA, EXT41B6Q, max UDMA/133 [ 7.638053] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 7.638309] ata6.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 7.638335] ata6.00: supports DRM functions and may not be fully accessible [ 7.638369] ata6.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 7.638400] ata6.00: configured for UDMA/133 [ 7.638610] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 840 1B6Q PQ: 0 ANSI: 5 [ 7.638860] scsi 5:0:0:0: Attached scsi generic sg3 type 0 [ 7.641095] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.641097] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 7.641127] sd 4:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 7.641133] sd 0:0:0:0: [sda] Write Protect is off [ 7.641135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.641146] [drm:i915_gem_open] [ 7.641149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.641154] sd 5:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 7.641155] sd 4:0:0:0: [sdb] Write Protect is off [ 7.641156] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.641167] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.641185] sd 5:0:0:0: [sdc] Write Protect is off [ 7.641186] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 7.641194] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.641377] [drm:i915_gem_open] [ 7.641383] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 7.641384] [drm:drm_mode_getresources] [CRTC:21] [ 7.641385] [drm:drm_mode_getresources] [CRTC:25] [ 7.641385] [drm:drm_mode_getresources] [CRTC:29] [ 7.641386] [drm:drm_mode_getresources] [ENCODER:32:DAC-32] [ 7.641387] [drm:drm_mode_getresources] [ENCODER:33:TMDS-33] [ 7.641388] [drm:drm_mode_getresources] [CONNECTOR:34:eDP-1] [ 7.641388] [drm:drm_mode_getresources] [CONNECTOR:31:VGA-1] [ 7.641389] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 7.641391] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 7.641392] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 7.641393] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 7.641466] sdc: sdc1 sdc2 sdc3 [ 7.641704] sd 5:0:0:0: [sdc] Attached SCSI disk [ 7.642263] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 7.643121] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 7.644392] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 7.644395] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 7.644407] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 7.644408] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 7.644410] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 7.646098] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 7.646100] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 7.646101] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 7.646109] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 7.646110] [drm:intel_crt_detect] CRT not detected via hotplug [ 7.646313] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 7.646314] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 7.646513] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 7.646514] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 7.646515] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 7.646516] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 7.647010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 7.647011] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 7.647012] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 7.647013] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 7.647015] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 7.647016] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 7.647017] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 7.647019] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 7.647019] [drm:intel_crt_detect] CRT not detected via hotplug [ 7.647237] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 7.647238] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 7.647399] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 7.647400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 7.647401] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 7.647402] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 7.647925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 7.647926] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 7.647927] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 7.647929] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 7.647943] [drm:drm_mode_addfb2] [FB:43] [ 7.649618] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.649620] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.649726] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.767543] raid6: sse2x1 gen() 10488 MB/s [ 7.835532] raid6: sse2x1 xor() 8994 MB/s [ 7.903508] raid6: sse2x2 gen() 14641 MB/s [ 7.971468] raid6: sse2x2 xor() 9960 MB/s [ 8.038918] sdb: sdb1 [ 8.039188] sd 4:0:0:0: [sdb] Attached SCSI disk [ 8.039451] raid6: sse2x4 gen() 16973 MB/s [ 8.107422] raid6: sse2x4 xor() 11882 MB/s [ 8.175397] raid6: avx2x1 gen() 22479 MB/s [ 8.243371] raid6: avx2x2 gen() 25990 MB/s [ 8.311347] raid6: avx2x4 gen() 30331 MB/s [ 8.311349] raid6: using algorithm avx2x4 gen() 30331 MB/s [ 8.311349] raid6: using avx2x2 recovery algorithm [ 8.311577] xor: automatically using best checksumming function: [ 8.351331] avx : 36413.000 MB/sec [ 8.353236] Btrfs loaded, assert=on [ 8.355205] BTRFS: device fsid d1eec7b3-018d-44f9-93ca-63021a64a90c devid 1 transid 206173 /dev/sdc1 [ 9.865440] sda: sda1 sda2 sda3 [ 9.866500] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.153307] BTRFS info (device sdc1): use ssd allocation scheme [ 10.153311] BTRFS info (device sdc1): disk space caching is enabled [ 10.471621] device-mapper: uevent: version 1.0.3 [ 10.471685] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com [ 10.556012] BTRFS info (device sdc1): disk space caching is enabled [ 10.641576] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 10.641625] ACPI: AC Adapter [AC] (on-line) [ 10.650598] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 10.650612] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 10.659597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.661984] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 10.661992] ACPI: Battery Slot [BAT0] (battery present) [ 10.662082] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 10.662085] ACPI: Battery Slot [BAT1] (battery absent) [ 10.684884] input: PC Speaker as /devices/platform/pcspkr/input/input14 [ 10.685912] thermal LNXTHERM:00: registered as thermal_zone0 [ 10.685914] ACPI: Thermal Zone [CPUZ] (57 C) [ 10.693333] pps_core: LinuxPPS API ver. 1 registered [ 10.693335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 10.699251] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=5273/5273 [ 10.699254] [drm:intel_panel_actually_set_backlight] set backlight PWM = 5273 [ 10.700148] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20150818/psargs-359) [ 10.700153] ACPI Error: Method parse/execution failed [\_TZ.PSL] (Node ffff8806964a8630), AE_NOT_FOUND (20150818/psparse-542) [ 10.700157] ACPI Error: Method parse/execution failed [\_TZ.GFXZ._PSL] (Node ffff8806964a7a40), AE_NOT_FOUND (20150818/psparse-542) [ 10.700160] ACPI: Invalid passive threshold [ 10.710132] thermal LNXTHERM:01: registered as thermal_zone1 [ 10.710135] ACPI: Thermal Zone [GFXZ] (42 C) [ 10.710617] ACPI Warning: SystemIO range 0x000000000000EF80-0x000000000000EF9F conflicts with OpRegion 0x000000000000EF80-0x000000000000EF8F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254) [ 10.710622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.714149] hp_accel: laptop model unknown, using default axes configuration [ 10.748276] random: nonblocking pool is initialized [ 10.763118] iTCO_vendor_support: vendor-support=0 [ 10.764363] PTP clock support registered [ 10.764384] parport_pc 00:06: reported by Plug and Play ACPI [ 10.764456] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 10.766032] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.766037] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 10.766104] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 10.766108] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 10.767319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.767321] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.767323] usb usb3: Product: xHCI Host Controller [ 10.767323] usb usb3: Manufacturer: Linux 4.3.0-rc5-default+ xhci-hcd [ 10.767324] usb usb3: SerialNumber: 0000:00:14.0 [ 10.785664] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.785698] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 10.785756] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.791369] input: HP WMI hotkeys as /devices/virtual/input/input15 [ 10.791433] hub 3-0:1.0: USB hub found [ 10.791456] hub 3-0:1.0: 15 ports detected [ 10.801825] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.801829] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 10.801892] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 10.801894] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.801895] usb usb4: Product: xHCI Host Controller [ 10.801896] usb usb4: Manufacturer: Linux 4.3.0-rc5-default+ xhci-hcd [ 10.801897] usb usb4: SerialNumber: 0000:00:14.0 [ 10.801998] hub 4-0:1.0: USB hub found [ 10.802016] hub 4-0:1.0: 6 ports detected [ 10.816982] AVX2 version of gcm_enc/dec engaged. [ 10.816985] AES CTR mode by8 optimization enabled [ 10.822047] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 10.822050] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 10.822304] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 10.827706] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 10.840962] Intel(R) Wireless WiFi driver for Linux [ 10.840964] Copyright(c) 2003- 2015 Intel Corporation [ 10.841100] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control [ 10.842409] lis3lv02d: 8 bits 3DC sensor found [ 10.855256] ppdev: user-space parallel port driver [ 10.864141] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 10.864288] cfg80211: World regulatory domain updated: [ 10.864290] cfg80211: DFS Master region: unset [ 10.864292] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.864294] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.864296] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.864298] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 10.864299] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 10.864301] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 10.864303] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 10.864304] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 10.864306] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 10.889803] md: bind [ 10.962490] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 10.962493] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 10.962495] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 10.962497] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 10.962595] iwlwifi 0000:5c:00.0: L1 Enabled - LTR Disabled [ 10.974070] [drm:drm_mode_addfb2] [FB:43] [ 10.976530] [drm:drm_mode_setcrtc] [CRTC:21] [ 10.976534] [drm:drm_mode_setcrtc] [CONNECTOR:34:eDP-1] [ 10.980234] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 10.980982] thermal LNXTHERM:02: registered as thermal_zone2 [ 10.980985] ACPI: Thermal Zone [EXTZ] (0 C) [ 10.983761] iwlwifi 0000:5c:00.0 wlo1: renamed from wlan0 [ 10.988709] [drm:drm_mode_setcrtc] [CRTC:21] [ 10.988713] [drm:drm_mode_setcrtc] [CONNECTOR:34:eDP-1] [ 11.006787] e1000e 0000:00:19.0 eth0: registered PHC clock [ 11.006791] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 6c:3b:e5:8c:99:ec [ 11.006794] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 11.006844] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 11.007142] snd_hda_intel 0000:01:00.1: Disabling MSI [ 11.011091] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 11.016887] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 11.016889] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 11.016890] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 11.016891] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 11.016892] snd_hda_codec_idt hdaudioC0D0: inputs: [ 11.016893] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 11.016894] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 11.016895] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 11.059801] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 11.060373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 11.060441] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 11.060504] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 11.060565] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 11.110394] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 11.118364] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 11.134722] usb 4-1: New USB device found, idVendor=0424, idProduct=5534 [ 11.134725] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 11.134727] usb 4-1: Product: USB5534 [ 11.134728] usb 4-1: Manufacturer: SMSC [ 11.134729] usb 4-1: SerialNumber: 1239567 [ 11.136368] hub 4-1:1.0: USB hub found [ 11.136407] hub 4-1:1.0: 4 ports detected [ 11.211862] Adding 20972540k swap on /dev/sda2. Priority:-1 extents:1 across:20972540k FS [ 11.212042] md: bind [ 11.217957] md: raid0 personality registered for level 0 [ 11.218140] md/raid0:md127: md_size is 2994066944 sectors. [ 11.218141] md: RAID0 configuration for md127 - 2 zones [ 11.218142] md: zone0=[sda1/sdb1] [ 11.218145] zone-offset= 0KB, device-offset= 0KB, size=1250260736KB [ 11.218146] md: zone1=[sda1] [ 11.218147] zone-offset=1250260736KB, device-offset= 625130368KB, size= 246772736KB [ 11.218154] md127: detected capacity change from 0 to 1532962275328 [ 11.242500] usb 3-1: New USB device found, idVendor=0424, idProduct=5534 [ 11.242503] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.242877] hub 3-1:1.0: USB hub found [ 11.242904] hub 3-1:1.0: 4 ports detected [ 11.297357] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 11.335254] XFS (sda3): Mounting V4 Filesystem [ 11.380942] thermal LNXTHERM:03: registered as thermal_zone4 [ 11.380945] ACPI: Thermal Zone [LOCZ] (0 C) [ 11.414273] usb 3-5: new full-speed USB device number 3 using xhci_hcd [ 11.486825] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 11.486878] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22 [ 11.487436] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23 [ 11.513597] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20150818/psargs-359) [ 11.513604] ACPI Error: Method parse/execution failed [\_TZ.PSL] (Node ffff8806964a8630), AE_NOT_FOUND (20150818/psparse-542) [ 11.513609] ACPI Error: Method parse/execution failed [\_TZ.BATZ._PSL] (Node ffff8806964a8810), AE_NOT_FOUND (20150818/psparse-542) [ 11.513613] ACPI: Invalid passive threshold [ 11.543363] usb 3-5: New USB device found, idVendor=138a, idProduct=003f [ 11.543367] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 11.543368] usb 3-5: SerialNumber: 003078071b90 [ 11.547825] XFS (sda3): Ending clean mount [ 11.614209] usb 3-1.3: new full-speed USB device number 4 using xhci_hcd [ 11.705178] usb 3-1.3: New USB device found, idVendor=04fc, idProduct=0801 [ 11.705181] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.705183] usb 3-1.3: Product: USB Multi-Smart Mouse [ 11.705184] usb 3-1.3: Manufacturer: MLK [ 11.705343] usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 11.777093] thermal LNXTHERM:04: registered as thermal_zone5 [ 11.777096] ACPI: Thermal Zone [BATZ] (27 C) [ 11.777469] thermal LNXTHERM:05: registered as thermal_zone6 [ 11.777471] ACPI: Thermal Zone [PCHZ] (114 C) [ 11.814162] usb 3-7: new high-speed USB device number 5 using xhci_hcd [ 11.978812] usb 3-7: New USB device found, idVendor=04f2, idProduct=b3ed [ 11.978815] usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 11.978817] usb 3-7: Product: HP HD Webcam [ 11.978818] usb 3-7: Manufacturer: Chicony Electronics Co.,Ltd. [ 11.978819] usb 3-7: SerialNumber: 0x0001 [ 11.989352] Linux video capture interface: v2.00 [ 11.991996] usbcore: registered new interface driver usbhid [ 11.991999] usbhid: USB HID core driver [ 11.993273] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3ed) [ 11.994316] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input24 [ 11.994367] usbcore: registered new interface driver uvcvideo [ 11.994368] USB Video Class driver (1.1.1) [ 12.007054] input: MLK USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:04FC:0801.0001/input/input25 [ 12.022023] usb 3-1.4: new low-speed USB device number 6 using xhci_hcd [ 12.062202] hid-generic 0003:04FC:0801.0001: input,hidraw0: USB HID v1.11 Mouse [MLK USB Multi-Smart Mouse] on usb-0000:00:14.0-1.3/input0 [ 12.116051] usb 3-1.4: New USB device found, idVendor=046d, idProduct=c312 [ 12.116055] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 12.116056] usb 3-1.4: Product: USB Multimedia Keyboard [ 12.116057] usb 3-1.4: Manufacturer: BTC [ 12.116243] usb 3-1.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 12.116248] usb 3-1.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 12.119724] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:046D:C312.0002/input/input26 [ 12.174275] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:14.0-1.4/input0 [ 12.180919] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:046D:C312.0003/input/input27 [ 12.194046] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input28 [ 12.234190] hid-generic 0003:046D:C312.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:14.0-1.4/input1 [ 12.416528] bcache: bch_journal_replay() journal replay done, 303 keys in 26 entries, seq 10098914 [ 12.416599] bcache: register_cache() registered cache device sdc3 [ 12.418559] bcache: register_bdev() registered backing device md127 [ 12.513796] bcache: bch_cached_dev_attach() Caching md127 as bcache0 on set 4189298b-f960-4cca-a93b-fbfe12e0caa4 [ 12.527795] XFS (bcache0): Mounting V4 Filesystem [ 12.558051] XFS (bcache0): Ending clean mount [ 13.371154] audit: type=1305 audit(1444814271.368:2): audit_pid=875 old=0 auid=4294967295 ses=4294967295 res=1 [ 13.437149] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.447255] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 13.449095] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.561998] [drm:i915_gem_open] [ 18.565233] [drm:i915_gem_open] [ 18.565240] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 18.565431] [drm:i915_gem_open] [ 18.565447] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 18.565449] [drm:drm_mode_getresources] [CRTC:21] [ 18.565450] [drm:drm_mode_getresources] [CRTC:25] [ 18.565450] [drm:drm_mode_getresources] [CRTC:29] [ 18.565451] [drm:drm_mode_getresources] [ENCODER:32:DAC-32] [ 18.565452] [drm:drm_mode_getresources] [ENCODER:33:TMDS-33] [ 18.565453] [drm:drm_mode_getresources] [CONNECTOR:34:eDP-1] [ 18.565453] [drm:drm_mode_getresources] [CONNECTOR:31:VGA-1] [ 18.565454] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 18.565827] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 18.565833] [drm:drm_mode_addfb2] [FB:45] [ 18.565919] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 18.565922] [drm:drm_mode_getresources] [CRTC:21] [ 18.565923] [drm:drm_mode_getresources] [CRTC:25] [ 18.565924] [drm:drm_mode_getresources] [CRTC:29] [ 18.565925] [drm:drm_mode_getresources] [ENCODER:32:DAC-32] [ 18.565926] [drm:drm_mode_getresources] [ENCODER:33:TMDS-33] [ 18.565927] [drm:drm_mode_getresources] [CONNECTOR:34:eDP-1] [ 18.565928] [drm:drm_mode_getresources] [CONNECTOR:31:VGA-1] [ 18.565929] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2] [ 18.565999] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 18.566004] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 18.575704] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 18.575708] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 18.596097] [drm:drm_mode_addfb2] [FB:45] [ 18.596281] [drm:drm_mode_setcrtc] [CRTC:21] [ 18.596283] [drm:drm_mode_setcrtc] [CONNECTOR:34:eDP-1] [ 18.600368] [drm:drm_mode_setcrtc] [CRTC:25] [ 18.600376] [drm:drm_mode_setcrtc] [CRTC:29] [ 18.621753] iwlwifi 0000:5c:00.0: L1 Enabled - LTR Disabled [ 18.628717] iwlwifi 0000:5c:00.0: L1 Enabled - LTR Disabled [ 18.628807] iwlwifi 0000:5c:00.0: Radio type=0x1-0x2-0x0 [ 18.899649] iwlwifi 0000:5c:00.0: L1 Enabled - LTR Disabled [ 18.906592] iwlwifi 0000:5c:00.0: L1 Enabled - LTR Disabled [ 18.906681] iwlwifi 0000:5c:00.0: Radio type=0x1-0x2-0x0 [ 18.987015] NET: Registered protocol family 17 [ 20.732905] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 20.732909] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 22.006226] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:6e3b:e5ff:fe8c:99ec DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=258 TC=0 HOPLIMIT=255 FLOWLBL=1013828 PROTO=UDP SPT=5353 DPT=5353 LEN=218 [ 22.029469] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:6e3b:e5ff:fe8c:99ec DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=1013828 PROTO=UDP SPT=5353 DPT=5353 LEN=390 [ 22.162788] IPv4: martian source 255.255.255.255 from 192.168.234.1, on dev enp0s25 [ 22.162796] ll header: 00000000: ff ff ff ff ff ff 00 1c 4a 86 25 6a 08 00 ........J.%j.. [ 22.280071] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:6e3b:e5ff:fe8c:99ec DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=1013828 PROTO=UDP SPT=5353 DPT=5353 LEN=390 [ 22.530904] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:6e3b:e5ff:fe8c:99ec DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=430 TC=0 HOPLIMIT=255 FLOWLBL=1013828 PROTO=UDP SPT=5353 DPT=5353 LEN=390 [ 22.731401] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:6e3b:e5ff:fe8c:99ec DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=400 TC=0 HOPLIMIT=255 FLOWLBL=1013828 PROTO=UDP SPT=5353 DPT=5353 LEN=360 [ 25.535366] IPv4: martian source 255.255.255.255 from 192.168.234.1, on dev enp0s25 [ 25.535383] ll header: 00000000: ff ff ff ff ff ff 00 1c 4a 86 25 6a 08 00 ........J.%j.. [ 25.623394] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=15504 DF PROTO=TCP SPT=2664 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460CA9B0000000001030301) [ 26.611921] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=15506 DF PROTO=TCP SPT=2664 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460CBC70000000001030301) [ 32.609839] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=15508 DF PROTO=TCP SPT=2664 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460CE1F0000000001030301) [ 36.749990] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=33634 DF PROTO=TCP SPT=2665 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460CFBD0000000001030301) [ 39.747295] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=33636 DF PROTO=TCP SPT=2665 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460D0E90000000001030301) [ 44.009910] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 44.009915] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 44.009917] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 44.009929] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 44.009936] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 44.010805] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 44.011685] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 44.012960] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 44.012963] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 44.012965] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 44.012966] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 44.012970] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 44.013082] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 44.013084] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 44.013085] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 44.013092] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 44.013093] [drm:intel_crt_detect] CRT not detected via hotplug [ 44.013331] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 44.013332] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 44.013575] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 44.013576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.013577] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 44.013579] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 44.014093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.014094] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 44.014094] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 44.014096] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 44.321165] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 44.321170] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 44.321172] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 44.322057] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 44.322923] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 44.324205] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 44.324208] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 44.324210] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 44.324212] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 44.324219] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 44.324288] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 44.324289] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 44.324290] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 44.324298] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 44.324299] [drm:intel_crt_detect] CRT not detected via hotplug [ 44.324464] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 44.324465] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 44.324623] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 44.324624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.324625] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 44.324626] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 44.325145] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.325146] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 44.325146] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 44.325148] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 44.432906] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=5273/5273 [ 44.432911] [drm:intel_panel_actually_set_backlight] set backlight PWM = 5273 [ 44.590283] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 44.703150] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 44.705899] [drm:i915_gem_open] [ 44.716478] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 44.718689] [drm:i915_gem_open] [ 44.728863] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 44.730467] [drm:drm_mode_addfb2] [FB:47] [ 44.739616] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 44.739620] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 44.739622] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 44.740494] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 44.741342] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 44.742607] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 44.742610] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 44.742612] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 44.742623] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 44.742626] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 44.742677] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 44.742679] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 44.742680] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 44.742687] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 44.742688] [drm:intel_crt_detect] CRT not detected via hotplug [ 44.742887] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 44.742888] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 44.743085] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 44.743086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.743087] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 44.743088] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 44.743569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 44.743571] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 44.743572] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 44.743573] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 44.908511] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:6e3b:e5ff:fe8c:99ec DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=1013828 PROTO=UDP SPT=5353 DPT=5353 LEN=44 [ 45.470680] Bluetooth: Core ver 2.20 [ 45.470692] NET: Registered protocol family 31 [ 45.470693] Bluetooth: HCI device and connection manager initialized [ 45.470696] Bluetooth: HCI socket layer initialized [ 45.470697] Bluetooth: L2CAP socket layer initialized [ 45.470706] Bluetooth: SCO socket layer initialized [ 45.474802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 45.474804] Bluetooth: BNEP filters: protocol multicast [ 45.474807] Bluetooth: BNEP socket layer initialized [ 45.744818] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=33638 DF PROTO=TCP SPT=2665 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460D3410000000001030301) [ 46.271526] [drm:drm_mode_addfb2] [FB:46] [ 46.623024] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.623028] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 46.623029] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 46.623893] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 46.624758] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 46.626045] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 46.626048] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 46.626050] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 46.626052] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 46.626059] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.626118] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 46.626119] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 46.626120] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 46.626127] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 46.626127] [drm:intel_crt_detect] CRT not detected via hotplug [ 46.626286] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.626287] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 46.626442] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.626443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.626444] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 46.626445] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 46.626909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.626911] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 46.626912] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 46.626914] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 46.731097] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.731102] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 46.731104] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 46.731981] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 46.732850] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 46.734135] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 46.734139] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 46.734141] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 46.734142] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 46.734155] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.734213] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 46.734214] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 46.734216] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 46.734223] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 46.734223] [drm:intel_crt_detect] CRT not detected via hotplug [ 46.734395] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.734396] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 46.734557] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.734558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.734559] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 46.734560] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 46.735073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.735074] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 46.735075] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 46.735076] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 46.859497] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.859502] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 46.859504] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 46.860391] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 46.861261] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 46.862638] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 46.862644] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 46.862647] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 46.862649] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 46.862658] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.862746] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 46.862749] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 46.862751] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 46.862759] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 46.862761] [drm:intel_crt_detect] CRT not detected via hotplug [ 46.862927] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.862929] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 46.863087] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.863089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.863090] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 46.863091] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 46.863627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.863630] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 46.863631] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 46.863632] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 46.895569] [drm:drm_mode_addfb2] [FB:48] [ 46.931858] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.931863] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] [ 46.931865] [drm:intel_dp_detect] [CONNECTOR:34:eDP-1] [ 46.932752] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 46.934534] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 46.935848] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 46.935853] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:34:eDP-1] probed modes : [ 46.935856] [drm:drm_mode_debug_printmodeline] Modeline 35:"1600x900" 60 107800 1600 1648 1680 1940 900 903 908 926 0x48 0x9 [ 46.935858] [drm:drm_mode_debug_printmodeline] Modeline 36:"1600x900" 40 71860 1600 1648 1680 1940 900 903 908 926 0x40 0x9 [ 46.935868] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 46.935957] [drm:drm_mode_getconnector] [CONNECTOR:31:?] [ 46.935959] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] [ 46.935960] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1 [ 46.935969] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 46.935970] [drm:intel_crt_detect] CRT not detected via hotplug [ 46.936143] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.936144] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 46.936314] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 46.936316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.936318] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 46.936319] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 46.936854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 46.936856] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 46.936858] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 46.936860] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:VGA-1] disconnected [ 47.034301] [drm:drm_mode_addfb2] [FB:50] [ 47.051886] [drm:drm_mode_addfb2] [FB:52] [ 47.069418] [drm:drm_mode_addfb2] [FB:53] [ 47.162665] [drm:i915_gem_open] [ 47.186715] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 47.187432] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 47.297755] fuse init (API version 7.23) [ 48.785217] [drm:drm_mode_addfb2] [FB:54] [ 48.802706] [drm:drm_mode_addfb2] [FB:55] [ 48.989391] [drm:i915_gem_open] [ 49.008276] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 49.940355] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 49.940367] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 61.863876] wlo1: authenticate with 00:1c:4a:44:0f:8c [ 61.868615] wlo1: send auth to 00:1c:4a:44:0f:8c (try 1/3) [ 61.874003] wlo1: authenticated [ 61.874090] iwlwifi 0000:5c:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP [ 61.874094] iwlwifi 0000:5c:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP [ 61.876065] wlo1: associate with 00:1c:4a:44:0f:8c (try 1/3) [ 61.881866] wlo1: RX AssocResp from 00:1c:4a:44:0f:8c (capab=0x411 status=0 aid=1) [ 61.887652] wlo1: associated [ 63.347716] IPv4: martian source 255.255.255.255 from 192.168.234.1, on dev wlo1 [ 63.347720] ll header: 00000000: ff ff ff ff ff ff 00 1c 4a 86 25 6a 08 00 ........J.%j.. [ 63.363917] SFW2-INext-DROP-DEFLT IN=wlo1 OUT= MAC= SRC=fe80:0000:0000:0000:6e88:14ff:fe2d:0480 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=859198 PROTO=UDP SPT=5353 DPT=5353 LEN=44 [ 66.007670] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=6922 DF PROTO=TCP SPT=2667 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460DB2C0000000001030301) [ 66.737951] IPv4: martian source 255.255.255.255 from 192.168.234.1, on dev wlo1 [ 66.737955] ll header: 00000000: ff ff ff ff ff ff 00 1c 4a 86 25 6a 08 00 ........J.%j.. [ 70.512978] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 70.523780] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 76.094944] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 76.630677] [drm:drm_mode_addfb2] [FB:45] [ 76.630721] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 76.665406] [drm:drm_mode_addfb2] [FB:46] [ 80.733253] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 82.717007] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 83.724179] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 83.960713] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 84.582556] [drm:drm_mode_addfb2] [FB:45] [ 84.599564] [drm:drm_mode_addfb2] [FB:47] [ 88.230548] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 89.133295] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 89.165135] [drm:drm_mode_addfb2] [FB:48] [ 89.182364] [drm:drm_mode_addfb2] [FB:50] [ 89.199707] [drm:drm_mode_addfb2] [FB:52] [ 89.270817] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=55199 DF PROTO=TCP SPT=2669 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460E4430000000001030301) [ 91.189502] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 94.365533] SFW2-INext-DROP-DEFLT IN=wlo1 OUT= MAC= SRC=fe80:0000:0000:0000:6e88:14ff:fe2d:0480 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=859198 PROTO=UDP SPT=5353 DPT=5353 LEN=44 [ 95.156524] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 96.979403] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 99.653202] [drm:drm_mode_addfb2] [FB:45] [ 99.653858] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 99.677204] [drm:drm_mode_addfb2] [FB:46] [ 99.695159] [drm:drm_mode_addfb2] [FB:47] [ 100.726060] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 101.652937] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 103.573090] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 107.576568] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 107.900300] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC= SRC=fe80:0000:0000:0000:6e3b:e5ff:fe8c:99ec DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=1013828 PROTO=UDP SPT=5353 DPT=5353 LEN=44 [ 108.575300] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 111.391565] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=17387 DF PROTO=TCP SPT=2670 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460ECE80000000001030301) [ 113.060473] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 114.213258] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 114.764124] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 115.836674] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 119.810408] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 121.042776] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 121.744534] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 122.882074] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 123.127579] [drm:drm_mode_addfb2] [FB:45] [ 123.135507] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 123.158306] [drm:drm_mode_addfb2] [FB:48] [ 124.209629] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 124.778215] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 126.361368] SFW2-INext-DROP-DEFLT IN=wlo1 OUT= MAC= SRC=fe80:0000:0000:0000:6e88:14ff:fe2d:0480 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=859198 PROTO=UDP SPT=5353 DPT=5353 LEN=44 [ 128.666794] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=38613 DF PROTO=TCP SPT=2672 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460F3A80000000001030301) [ 143.782594] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 143.792306] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 145.545960] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 146.799277] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 146.823077] [drm:drm_mode_addfb2] [FB:46] [ 146.840388] [drm:drm_mode_addfb2] [FB:47] [ 148.722676] [drm:drm_mode_addfb2] [FB:50] [ 148.739916] [drm:drm_mode_addfb2] [FB:52] [ 150.604070] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 150.787489] SFW2-INext-DROP-DEFLT IN=enp0s25 OUT= MAC=6c:3b:e5:8c:99:ec:00:1c:4a:86:25:6a:08:00 SRC=192.168.234.1 DST=192.168.234.102 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=26925 DF PROTO=TCP SPT=2673 DPT=14013 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A0460FC4D0000000001030301) [ 150.805665] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 150.875112] [drm:drm_mode_addfb2] [FB:53] [ 152.327522] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 152.694395] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 154.294851] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 154.714995] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 156.749895] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 157.583029] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz [ 158.949133] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 40Hz [ 159.086456] [drm:intel_dp_set_drrs_state] eDP Refresh Rate set to : 60Hz