[ 1037.991689] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1089.525611] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=368/937
[ 1089.525616] [drm:intel_panel_actually_set_backlight] set backlight PWM = 390
[ 1089.525628] [drm:intel_edp_backlight_power] panel power control backlight disable
[ 1089.728203] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937
[ 1089.728212] [drm:intel_panel_actually_set_backlight] set backlight PWM = 37
[ 1089.728334] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
[ 1089.728340] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
[ 1089.728350] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz
[ 1089.728364] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
[ 1089.728369] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
[ 1089.728376] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 1089.728384] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff8801dffd1000 for pipe A
[ 1089.728388] [drm:intel_dump_pipe_config] cpu_transcoder: D
[ 1089.728392] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1089.728398] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1089.728404] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
[ 1089.728410] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1089.728414] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1089.728418] [drm:intel_dump_pipe_config] requested mode:
[ 1089.728426] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x0 0x9
[ 1089.728430] [drm:intel_dump_pipe_config] adjusted mode:
[ 1089.728438] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
[ 1089.728446] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0x9
[ 1089.728450] [drm:intel_dump_pipe_config] port clock: 270000
[ 1089.728454] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
[ 1089.728459] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1089.728465] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1089.728470] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1089.728474] [drm:intel_dump_pipe_config] ips: 1
[ 1089.728478] [drm:intel_dump_pipe_config] double wide: 0
[ 1089.728484] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1089.728488] [drm:intel_dump_pipe_config] planes on this crtc
[ 1089.728494] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
[ 1089.728501] [drm:intel_dump_pipe_config] 	FB:49, fb = 3840x2130 format = 0x34325258
[ 1089.728509] [drm:intel_dump_pipe_config] 	scaler:0 src (1920, 1050) 1920x1080 dst (0, 0) 1920x1080
[ 1089.728515] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 enabled
[ 1089.728519] [drm:intel_dump_pipe_config] 	FB:109, fb = 64x64 format = 0x34325241
[ 1089.728527] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 64x5 dst (1523, 1075) 64x5
[ 1089.728533] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[ 1089.756493] [drm:intel_edp_backlight_off] 
[ 1089.960098] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[ 1089.960113] [drm:intel_disable_pipe] disabling pipe A
[ 1089.974475] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[ 1089.974487] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[ 1089.974653] [drm:edp_panel_off] Turn eDP port A panel power off
[ 1089.974659] [drm:wait_panel_off] Wait for panel power off time
[ 1089.974663] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000
[ 1089.975255] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010
[ 1089.975260] [drm:intel_hpd_irq_handler] digital hpd port A - short
[ 1089.975294] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short
[ 1090.026987] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
[ 1090.026992] [drm:intel_hpd_irq_handler] digital hpd port A - long
[ 1090.026994] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0
[ 1090.028579] [drm:wait_panel_status] Wait complete
[ 1090.028606] [drm:intel_connector_check_state] [CONNECTOR:32:eDP-1]
[ 1090.028610] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[ 1090.028612] [drm:check_encoder_state] [ENCODER:40:TMDS-40]
[ 1090.028614] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[ 1090.028616] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[ 1090.028617] [drm:check_encoder_state] [ENCODER:44:DP MST-44]
[ 1090.028619] [drm:check_crtc_state] [CRTC:21]
[ 1090.028622] [drm:check_shared_dpll_state] WRPLL 1
[ 1090.028624] [drm:check_shared_dpll_state] WRPLL 2
[ 1090.028625] [drm:check_shared_dpll_state] SPLL
[ 1090.028661] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-2] checking for sink bpp constrains
[ 1090.028663] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
[ 1090.028667] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 1090.028670] [drm:intel_dump_pipe_config] [CRTC:25][modeset] config ffff8801dffd0c00 for pipe B
[ 1090.028671] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 1090.028672] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1090.028675] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1090.028677] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1730150, gmch_n: 8388608, link_m: 288358, link_n: 1048576, tu: 14
[ 1090.028679] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1090.028680] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1090.028681] [drm:intel_dump_pipe_config] requested mode:
[ 1090.028684] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[ 1090.028686] [drm:intel_dump_pipe_config] adjusted mode:
[ 1090.028688] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 1090.028691] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
[ 1090.028692] [drm:intel_dump_pipe_config] port clock: 540000
[ 1090.028693] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
[ 1090.028695] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1090.028696] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1090.028698] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1090.028699] [drm:intel_dump_pipe_config] ips: 0
[ 1090.028701] [drm:intel_dump_pipe_config] double wide: 0
[ 1090.028702] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1090.028703] [drm:intel_dump_pipe_config] planes on this crtc
[ 1090.028705] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 enabled
[ 1090.028707] [drm:intel_dump_pipe_config] 	FB:49, fb = 3840x2130 format = 0x34325258
[ 1090.028710] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 469) 1920x1080 dst (0, 0) 1920x1080
[ 1090.028712] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
[ 1090.028713] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
[ 1090.028725] [drm:intel_mst_disable_dp] 2
[ 1090.028727] [drm:drm_dp_destroy_payload_step1] 
[ 1090.033818] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1090.033823] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1090.036779] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1090.036785] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1094.028004] [drm:drm_dp_mst_wait_tx_reply] timedout msg send ffff8801dffd1c00 2 0
[ 1094.046285] [drm:drm_dp_update_payload_part1] removing payload 0
[ 1094.046295] [drm:intel_disable_pipe] disabling pipe B
[ 1094.058347] [drm:intel_mst_post_disable_dp] 2
[ 1094.058799] [drm:drm_dp_update_payload_part2] payload 0 2
[ 1094.058803] [drm:drm_dp_mst_put_payload_id] putting payload 1
[ 1094.058822] [drm:intel_connector_check_state] [CONNECTOR:47:DP-2]
[ 1094.058824] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[ 1094.058827] [drm:check_encoder_state] [ENCODER:40:TMDS-40]
[ 1094.058830] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[ 1094.058831] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[ 1094.058833] [drm:check_encoder_state] [ENCODER:44:DP MST-44]
[ 1094.058834] [drm:check_crtc_state] [CRTC:25]
[ 1094.058837] [drm:check_shared_dpll_state] WRPLL 1
[ 1094.058839] [drm:check_shared_dpll_state] WRPLL 2
[ 1094.058841] [drm:check_shared_dpll_state] SPLL
[ 1094.058871] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
[ 1094.058874] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1094.058878] [drm:connected_sink_compute_bpp] [CONNECTOR:52:DP-3] checking for sink bpp constrains
[ 1094.058880] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[ 1094.058885] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 1094.058888] [drm:intel_dump_pipe_config] [CRTC:29][modeset] config ffff8800bd0bb400 for pipe C
[ 1094.058890] [drm:intel_dump_pipe_config] cpu_transcoder: C
[ 1094.058892] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1094.058895] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1094.058899] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1703936, gmch_n: 8388608, link_m: 283989, link_n: 1048576, tu: 14
[ 1094.058901] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1094.058904] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1094.058905] [drm:intel_dump_pipe_config] requested mode:
[ 1094.058910] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[ 1094.058912] [drm:intel_dump_pipe_config] adjusted mode:
[ 1094.058916] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[ 1094.058919] [drm:intel_dump_crtc_timings] crtc timings: 146250 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x0 flags: 0x6
[ 1094.058921] [drm:intel_dump_pipe_config] port clock: 540000
[ 1094.058923] [drm:intel_dump_pipe_config] pipe src size: 1680x1050
[ 1094.058926] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1094.058928] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1094.058931] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1094.058933] [drm:intel_dump_pipe_config] ips: 0
[ 1094.058935] [drm:intel_dump_pipe_config] double wide: 0
[ 1094.058937] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1094.058939] [drm:intel_dump_pipe_config] planes on this crtc
[ 1094.058942] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 enabled
[ 1094.058945] [drm:intel_dump_pipe_config] 	FB:49, fb = 3840x2130 format = 0x34325258
[ 1094.058948] [drm:intel_dump_pipe_config] 	scaler:0 src (1920, 0) 1680x1050 dst (0, 0) 1680x1050
[ 1094.058951] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
[ 1094.058954] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
[ 1094.058968] [drm:intel_mst_disable_dp] 1
[ 1094.058971] [drm:drm_dp_destroy_payload_step1] 
[ 1094.059313] [drm:intel_dp_check_mst_status] got esi 01 10 00
[ 1094.061257] [drm:intel_dp_check_mst_status] got esi2 01 00 00
[ 1094.061260] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1094.067877] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1094.067882] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1094.067939] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1094.068392] [drm:intel_dp_check_mst_status] got esi 01 10 00
[ 1094.068922] [drm:drm_dp_mst_handle_down_rep] Got MST reply with no msg ffff8800bbeb4660 0 1 84 91
[ 1094.069507] [drm:intel_dp_check_mst_status] got esi2 01 00 00
[ 1094.069508] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1094.082004] [drm:drm_dp_update_payload_part1] removing payload 0
[ 1094.082013] [drm:intel_disable_pipe] disabling pipe C
[ 1094.094368] [drm:intel_mst_post_disable_dp] 1
[ 1094.094822] [drm:drm_dp_mst_put_payload_id] putting payload 2
[ 1094.095161] [drm:intel_power_well_disable] disabling always-on
[ 1094.095177] [drm:intel_connector_check_state] [CONNECTOR:52:DP-3]
[ 1094.095179] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[ 1094.095181] [drm:check_encoder_state] [ENCODER:40:TMDS-40]
[ 1094.095183] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[ 1094.095185] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[ 1094.095186] [drm:check_encoder_state] [ENCODER:44:DP MST-44]
[ 1094.095188] [drm:check_crtc_state] [CRTC:29]
[ 1094.095191] [drm:check_shared_dpll_state] WRPLL 1
[ 1094.095192] [drm:check_shared_dpll_state] WRPLL 2
[ 1094.095194] [drm:check_shared_dpll_state] SPLL
[ 1094.109379] [drm:drm_mode_addfb2] [FB:111]
[ 1100.432784] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1100.432789] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1100.432807] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1100.432811] [drm:intel_power_well_enable] enabling always-on
[ 1100.433246] [drm:intel_dp_check_mst_status] got esi 01 20 00
[ 1100.433975] [drm:drm_dp_mst_handle_up_req] Got CSN: pn: 1 ldps:0 ddps: 0 mcs: 0 ip: 0 pdt: 0
[ 1100.434586] [drm:intel_dp_check_mst_status] got esi2 01 00 00
[ 1100.434589] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1100.434591] [drm:intel_power_well_disable] disabling always-on
[ 1100.435836] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
[ 1100.435839] [drm:drm_mode_getresources] [CONNECTOR:41:DP-1]
[ 1100.435841] [drm:drm_mode_getresources] [CONNECTOR:45:HDMI-A-1]
[ 1100.435843] [drm:drm_mode_getresources] [CONNECTOR:47:DP-2]
[ 1100.435844] [drm:drm_mode_getresources] [CONNECTOR:52:DP-3]
[ 1100.435846] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
[ 1100.435850] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
[ 1100.435853] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
[ 1100.435855] [drm:drm_mode_getconnector] [CONNECTOR:47:?]
[ 1100.435859] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
[ 1100.435863] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
[ 1101.188428] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1101.188433] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1101.188454] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1101.188458] [drm:intel_power_well_enable] enabling always-on
[ 1101.188906] [drm:intel_dp_check_mst_status] got esi 01 20 00
[ 1101.189766] [drm:drm_dp_mst_handle_up_req] Got CSN: pn: 1 ldps:1 ddps: 1 mcs: 0 ip: 0 pdt: 4
[ 1101.190410] [drm:intel_dp_check_mst_status] got esi2 01 00 00
[ 1101.190414] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1101.190417] [drm:intel_power_well_disable] disabling always-on
[ 1101.190423] [drm:intel_power_well_enable] enabling always-on
[ 1101.190924] [drm:intel_power_well_disable] disabling always-on
[ 1101.192928] [drm:intel_power_well_enable] enabling always-on
[ 1101.193444] [drm:drm_mode_getresources] [CONNECTOR:32:eDP-1]
[ 1101.193452] [drm:drm_mode_getresources] [CONNECTOR:41:DP-1]
[ 1101.193458] [drm:drm_mode_getresources] [CONNECTOR:45:HDMI-A-1]
[ 1101.193463] [drm:drm_mode_getresources] [CONNECTOR:47:DP-2]
[ 1101.193468] [drm:drm_mode_getresources] [CONNECTOR:52:DP-3]
[ 1101.193474] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[5] ENCODERS[5]
[ 1101.193484] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
[ 1101.193491] [drm:drm_mode_getconnector] [CONNECTOR:41:?]
[ 1101.193498] [drm:drm_mode_getconnector] [CONNECTOR:47:?]
[ 1101.193509] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
[ 1101.193518] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
[ 1101.193595] [drm:intel_power_well_disable] disabling always-on
[ 1101.200736] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1101.200741] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1101.200759] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1101.200764] [drm:intel_power_well_enable] enabling always-on
[ 1101.201202] [drm:intel_dp_check_mst_status] got esi 01 10 00
[ 1101.201522] [drm:drm_dp_send_enum_path_resources] enum path resources 1: 2560 2560
[ 1101.202110] [drm:intel_dp_check_mst_status] got esi2 01 00 00
[ 1101.202112] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1101.202114] [drm:intel_power_well_disable] disabling always-on
[ 1102.098853] [drm:drm_mode_setcrtc] [CRTC:21]
[ 1102.098859] [drm:drm_mode_setcrtc] [CONNECTOR:32:eDP-1]
[ 1102.098869] [drm:connected_sink_compute_bpp] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
[ 1102.098870] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
[ 1102.098874] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz
[ 1102.098879] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
[ 1102.098881] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
[ 1102.098883] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 1102.098886] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff8800bd04c400 for pipe A
[ 1102.098887] [drm:intel_dump_pipe_config] cpu_transcoder: D
[ 1102.098888] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1102.098890] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1102.098892] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
[ 1102.098894] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1102.098895] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1102.098896] [drm:intel_dump_pipe_config] requested mode:
[ 1102.098899] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x0 0x9
[ 1102.098900] [drm:intel_dump_pipe_config] adjusted mode:
[ 1102.098902] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
[ 1102.098904] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0x9
[ 1102.098906] [drm:intel_dump_pipe_config] port clock: 270000
[ 1102.098907] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
[ 1102.098908] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1102.098910] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1102.098911] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1102.098912] [drm:intel_dump_pipe_config] ips: 1
[ 1102.098913] [drm:intel_dump_pipe_config] double wide: 0
[ 1102.098915] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1102.098916] [drm:intel_dump_pipe_config] planes on this crtc
[ 1102.098917] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled
[ 1102.098919] [drm:intel_dump_pipe_config] 	FB:49, fb = 3840x2130 format = 0x34325258
[ 1102.098921] [drm:intel_dump_pipe_config] 	scaler:0 src (1920, 1050) 0x0 dst (0, 0) 0x0
[ 1102.098923] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[ 1102.098925] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[ 1102.108275] [drm:intel_power_well_enable] enabling always-on
[ 1102.108287] [drm:edp_panel_on] Turn eDP port A panel power on
[ 1102.108290] [drm:wait_panel_power_cycle] Wait for panel power cycle
[ 1102.108293] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[ 1102.108294] [drm:wait_panel_status] Wait complete
[ 1102.108297] [drm:wait_panel_on] Wait for panel power on
[ 1102.108299] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[ 1102.217906] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
[ 1102.217911] [drm:intel_hpd_irq_handler] digital hpd port A - long
[ 1102.217913] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0
[ 1102.217948] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
[ 1102.320588] [drm:wait_panel_status] Wait complete
[ 1102.320607] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[ 1102.320618] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[ 1102.321745] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 1102.321749] [drm:intel_dp_set_signal_levels] Using vswing level 0
[ 1102.321753] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 1102.322384] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
[ 1102.323320] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
[ 1102.323477] [drm:intel_enable_pipe] enabling pipe A
[ 1102.323650] [drm:intel_edp_backlight_on] 
[ 1102.323655] [drm:intel_panel_enable_backlight] pipe A
[ 1102.323666] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[ 1102.327852] [drm:intel_psr_enable] PSR not supported by this panel
[ 1102.327860] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[ 1102.390460] [drm:intel_connector_check_state] [CONNECTOR:32:eDP-1]
[ 1102.390473] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[ 1102.390480] [drm:check_encoder_state] [ENCODER:40:TMDS-40]
[ 1102.390484] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[ 1102.390487] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[ 1102.390490] [drm:check_encoder_state] [ENCODER:44:DP MST-44]
[ 1102.390496] [drm:check_crtc_state] [CRTC:21]
[ 1102.390517] [drm:check_shared_dpll_state] WRPLL 1
[ 1102.390522] [drm:check_shared_dpll_state] WRPLL 2
[ 1102.390525] [drm:check_shared_dpll_state] SPLL
[ 1102.390627] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=368/937
[ 1102.390631] [drm:intel_panel_actually_set_backlight] set backlight PWM = 390
[ 1102.390867] [drm:drm_mode_setcrtc] [CRTC:25]
[ 1102.390880] [drm:drm_mode_setcrtc] [CONNECTOR:47:DP-2]
[ 1102.390911] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-2] checking for sink bpp constrains
[ 1102.390917] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
[ 1102.390929] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 1102.390938] [drm:intel_dump_pipe_config] [CRTC:25][modeset] config ffff8800bcb3a000 for pipe B
[ 1102.390944] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 1102.390948] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1102.390956] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1102.390964] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1730150, gmch_n: 8388608, link_m: 288358, link_n: 1048576, tu: 14
[ 1102.390970] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1102.390975] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1102.390979] [drm:intel_dump_pipe_config] requested mode:
[ 1102.390989] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[ 1102.390992] [drm:intel_dump_pipe_config] adjusted mode:
[ 1102.391002] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 1102.391010] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
[ 1102.391015] [drm:intel_dump_pipe_config] port clock: 540000
[ 1102.391019] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
[ 1102.391024] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1102.391030] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1102.391035] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1102.391039] [drm:intel_dump_pipe_config] ips: 0
[ 1102.391043] [drm:intel_dump_pipe_config] double wide: 0
[ 1102.391048] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1102.391052] [drm:intel_dump_pipe_config] planes on this crtc
[ 1102.391059] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 enabled
[ 1102.391066] [drm:intel_dump_pipe_config] 	FB:49, fb = 3840x2130 format = 0x34325258
[ 1102.391073] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 469) 0x0 dst (0, 0) 0x0
[ 1102.391080] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
[ 1102.391086] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
[ 1102.391159] [drm:intel_mst_pre_enable_dp] 0
[ 1102.392310] [drm:intel_dp_set_signal_levels] Using signal levels 02000000
[ 1102.392317] [drm:intel_dp_set_signal_levels] Using vswing level 0
[ 1102.392325] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 2
[ 1102.399466] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
[ 1102.407197] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
[ 1102.407373] [drm:drm_dp_mst_allocate_vcpi] initing vcpi for 532 14
[ 1102.428261] [drm:intel_enable_pipe] enabling pipe B
[ 1102.428271] [drm:intel_mst_enable_dp] 1
[ 1102.430547] [drm:drm_dp_update_payload_part2] payload 0 1
[ 1102.440717] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1102.440724] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1102.440771] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1102.441257] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1102.443736] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1102.443746] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1102.443804] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1102.444295] [drm:intel_dp_check_mst_status] got esi 01 10 00
[ 1102.445223] [drm:intel_dp_check_mst_status] got esi2 01 00 00
[ 1102.445226] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1102.507126] [drm:intel_connector_check_state] [CONNECTOR:47:DP-2]
[ 1102.507133] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[ 1102.507136] [drm:check_encoder_state] [ENCODER:40:TMDS-40]
[ 1102.507140] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[ 1102.507142] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[ 1102.507144] [drm:check_encoder_state] [ENCODER:44:DP MST-44]
[ 1102.507149] [drm:check_crtc_state] [CRTC:25]
[ 1102.507161] [drm:check_shared_dpll_state] WRPLL 1
[ 1102.507163] [drm:check_shared_dpll_state] WRPLL 2
[ 1102.507165] [drm:check_shared_dpll_state] SPLL
[ 1102.507235] [drm:drm_mode_setcrtc] [CRTC:29]
[ 1102.507241] [drm:drm_mode_setcrtc] [CONNECTOR:52:DP-3]
[ 1102.507254] [drm:connected_sink_compute_bpp] [CONNECTOR:52:DP-3] checking for sink bpp constrains
[ 1102.507256] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
[ 1102.507262] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
[ 1102.507266] [drm:intel_dump_pipe_config] [CRTC:29][modeset] config ffff8800bcb3a000 for pipe C
[ 1102.507267] [drm:intel_dump_pipe_config] cpu_transcoder: C
[ 1102.507269] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1102.507272] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1102.507275] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1703936, gmch_n: 8388608, link_m: 283989, link_n: 1048576, tu: 14
[ 1102.507278] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1102.507279] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1102.507281] [drm:intel_dump_pipe_config] requested mode:
[ 1102.507285] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[ 1102.507287] [drm:intel_dump_pipe_config] adjusted mode:
[ 1102.507289] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x0 0x6
[ 1102.507292] [drm:intel_dump_crtc_timings] crtc timings: 146250 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x0 flags: 0x6
[ 1102.507294] [drm:intel_dump_pipe_config] port clock: 540000
[ 1102.507296] [drm:intel_dump_pipe_config] pipe src size: 1680x1050
[ 1102.507298] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1102.507300] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1102.507302] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1102.507303] [drm:intel_dump_pipe_config] ips: 0
[ 1102.507305] [drm:intel_dump_pipe_config] double wide: 0
[ 1102.507307] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
[ 1102.507308] [drm:intel_dump_pipe_config] planes on this crtc
[ 1102.507311] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 enabled
[ 1102.507314] [drm:intel_dump_pipe_config] 	FB:49, fb = 3840x2130 format = 0x34325258
[ 1102.507316] [drm:intel_dump_pipe_config] 	scaler:0 src (1920, 0) 0x0 dst (0, 0) 0x0
[ 1102.507319] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
[ 1102.507322] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
[ 1102.507363] [drm:intel_mst_pre_enable_dp] 1
[ 1102.507366] [drm:drm_dp_mst_allocate_vcpi] initing vcpi for 524 14
[ 1102.528325] [drm:intel_enable_pipe] enabling pipe C
[ 1102.528337] [drm:intel_mst_enable_dp] 2
[ 1102.530605] [drm:drm_dp_update_payload_part2] payload 0 2
[ 1102.530611] [drm:drm_dp_update_payload_part2] payload 1 1
[ 1102.543355] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
[ 1102.543362] [drm:intel_hpd_irq_handler] digital hpd port C - short
[ 1102.543391] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
[ 1102.543875] [drm:intel_dp_check_mst_status] got esi 01 10 00
[ 1102.544406] [drm:drm_dp_mst_handle_down_rep] Got NAK reply: req 0x11, reason 0x07, nak data 0x00
[ 1102.545016] [drm:intel_dp_check_mst_status] got esi2 01 00 00
[ 1102.545018] [drm:intel_dp_check_mst_status] got esi 01 00 00
[ 1102.595168] [drm:intel_connector_check_state] [CONNECTOR:52:DP-3]
[ 1102.595173] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
[ 1102.595176] [drm:check_encoder_state] [ENCODER:40:TMDS-40]
[ 1102.595179] [drm:check_encoder_state] [ENCODER:42:DP MST-42]
[ 1102.595181] [drm:check_encoder_state] [ENCODER:43:DP MST-43]
[ 1102.595182] [drm:check_encoder_state] [ENCODER:44:DP MST-44]
[ 1102.595186] [drm:check_crtc_state] [CRTC:29]
[ 1102.595196] [drm:check_shared_dpll_state] WRPLL 1
[ 1102.595197] [drm:check_shared_dpll_state] WRPLL 2
[ 1102.595199] [drm:check_shared_dpll_state] SPLL