[ 0.000000] Linux version 4.5.0-rc5+ (root@iqpc-0025ab6b05e5) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP Mon Feb 29 15:32:51 UTC 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-rc5+ root=LABEL=root ro debian-installer=en_US loglevel=0 i915.verbose_state_checks=1 drm.debug=0x1e log_buf_len=1M acpi_backlight=vendor [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000097a5efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097a5f000-0x0000000097a5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000097a60000-0x0000000097d5bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097d5c000-0x0000000097d5cfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000097d5d000-0x000000009eb6efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009eb6f000-0x000000009eb6ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009eb70000-0x000000009eb99fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009eb9a000-0x00000000bb0fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bb0fb000-0x00000000bb5fafff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000bb5fb000-0x00000000bbc7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbc7f000-0x00000000bbe7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbe7f000-0x00000000bbefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbeff000-0x00000000bbefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbf00000-0x00000000ce7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001307fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by HP [ 0.000000] efi: ACPI=0xbbefe000 ACPI 2.0=0xbbefe014 SMBIOS=0xbb8db000 MPS=0xbb971000 ESRT=0xbb079660 [ 0.000000] efi: requested map not found. [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP HP ProOne 400 G2 20-in Touch AiO/8063, BIOS N13 Ver. 02.02 11/12/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x130800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xbbf00 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x01f48000, 0x01f48fff] PGTABLE [ 0.000000] BRK [0x01f49000, 0x01f49fff] PGTABLE [ 0.000000] BRK [0x01f4a000, 0x01f4afff] PGTABLE [ 0.000000] BRK [0x01f4b000, 0x01f4bfff] PGTABLE [ 0.000000] BRK [0x01f4c000, 0x01f4cfff] PGTABLE [ 0.000000] BRK [0x01f4d000, 0x01f4dfff] PGTABLE [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 126132(96%) [ 0.000000] RAMDISK: [mem 0x17410000-0x279fffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BBEFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BBEFD0E8 0000B4 (v01 HPQOEM SLIC-BPC 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000BBEF0000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BBED0000 01CBCA (v02 HPQOEM 8063 00000000 INTL 20121018) [ 0.000000] ACPI: FACS 0x00000000BBE5A000 000040 [ 0.000000] ACPI: SSDT 0x00000000BBEFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018) [ 0.000000] ACPI: TCPA 0x00000000BBEFB000 000032 (v02 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000BBEFA000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018) [ 0.000000] ACPI: UEFI 0x00000000BBE66000 000042 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000BBEF4000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000BBEF3000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018) [ 0.000000] ACPI: MSDM 0x00000000BBEF2000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: SLIC 0x00000000BBEF1000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 0x00000000BBEEF000 000038 (v01 HPQOEM 8063 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BBEEE000 0000BC (v01 HPQOEM 8063 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BBEED000 00003C (v01 HPQOEM 8063 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BBECF000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000BBECE000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000BBECD000 000E6E (v02 CpuRef CpuSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000BBECC000 000278 (v01 HP INTELAIO 00001000 INTL 20121018) [ 0.000000] ACPI: FPDT 0x00000000BBECB000 000044 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: BGRT 0x00000000BBECA000 000038 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001307fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1306f8000-0x1306fbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001307fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000097a5efff] [ 0.000000] node 0: [mem 0x0000000097a60000-0x0000000097d5bfff] [ 0.000000] node 0: [mem 0x0000000097d5d000-0x000000009eb6efff] [ 0.000000] node 0: [mem 0x000000009eb9a000-0x00000000bb0fafff] [ 0.000000] node 0: [mem 0x00000000bbeff000-0x00000000bbefffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001307fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001307fffff] [ 0.000000] On node 0 totalpages: 964716 [ 0.000000] DMA32 zone: 11970 pages used for memmap [ 0.000000] DMA32 zone: 25 pages reserved [ 0.000000] DMA32 zone: 766060 pages, LIFO batch:31 [ 0.000000] Normal zone: 3104 pages used for memmap [ 0.000000] Normal zone: 198656 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbe800000-0xce7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x97a5f000-0x97a5ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x97d5c000-0x97d5cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9eb6f000-0x9eb6ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9eb70000-0x9eb99fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbb0fb000-0xbb5fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xbb5fb000-0xbbc7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbc7f000-0xbbe7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbe7f000-0xbbefefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf00000-0xce7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xce800000-0xf80f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.000000] e820: [mem 0xce800000-0xf80f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880130400000 s94232 r8192 d32744 u262144 [ 0.000000] pcpu-alloc: s94232 r8192 d32744 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 949617 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-rc5+ root=LABEL=root ro debian-installer=en_US loglevel=0 i915.verbose_state_checks=1 drm.debug=0x1e log_buf_len=1M acpi_backlight=vendor [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3213076K/3858864K available (5844K kernel code, 1166K rwdata, 2884K rodata, 1324K init, 832K bss, 645788K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:2048 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 3191.945 MHz processor [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.89 BogoMIPS (lpj=12767780) [ 0.000023] pid_max: default: 32768 minimum: 301 [ 0.000031] ACPI: Core revision 20160108 [ 0.023666] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.024186] Security Framework initialized [ 0.024187] Yama: becoming mindful. [ 0.024192] AppArmor: AppArmor disabled by boot time parameter [ 0.024376] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.025089] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.025445] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.025448] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.025627] CPU: Physical Processor ID: 0 [ 0.025628] CPU: Processor Core ID: 0 [ 0.025631] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.025631] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.025635] mce: CPU supports 8 MCE banks [ 0.025647] CPU0: Thermal monitoring enabled (TM1) [ 0.025653] process: using mwait in idle threads [ 0.025655] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.025656] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.025886] Freeing SMP alternatives memory: 24K (ffffffff81c70000 - ffffffff81c76000) [ 0.034225] ftrace: allocating 24063 entries in 94 pages [ 0.042295] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.046601] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086290] TSC deadline timer enabled [ 0.086295] smpboot: CPU0: Intel(R) Core(TM) i3-6100T CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.086315] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver. [ 0.086336] ... version: 4 [ 0.086336] ... bit width: 48 [ 0.086337] ... generic registers: 4 [ 0.086338] ... value mask: 0000ffffffffffff [ 0.086338] ... max period: 0000ffffffffffff [ 0.086339] ... fixed-purpose events: 3 [ 0.086339] ... event mask: 000000070000000f [ 0.086699] x86: Booting SMP configuration: [ 0.086701] .... node #0, CPUs: #1 [ 0.089153] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.089206] #2 #3 [ 0.094080] x86: Booted up 1 node, 4 CPUs [ 0.094083] smpboot: Total of 4 processors activated (25535.56 BogoMIPS) [ 0.097064] devtmpfs: initialized [ 0.098486] PM: Registering ACPI NVS region [mem 0x9eb6f000-0x9eb6ffff] (4096 bytes) [ 0.098487] PM: Registering ACPI NVS region [mem 0xbbc7f000-0xbbe7efff] (2097152 bytes) [ 0.098561] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.098607] pinctrl core: initialized pinctrl subsystem [ 0.098708] NET: Registered protocol family 16 [ 0.108922] cpuidle: using governor ladder [ 0.117101] cpuidle: using governor menu [ 0.117156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.117157] ACPI: bus type PCI registered [ 0.117158] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.117216] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.117217] PCI: not using MMCONFIG [ 0.117218] PCI: Using configuration type 1 for base access [ 0.129048] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.129049] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.129224] ACPI: Added _OSI(Module Device) [ 0.129225] ACPI: Added _OSI(Processor Device) [ 0.129226] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.129226] ACPI: Added _OSI(Processor Aggregator Device) [ 0.131626] ACPI: Executed 4 blocks of module-level executable AML code [ 0.136003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.138051] ACPI: Dynamic OEM Table Load: [ 0.138056] ACPI: SSDT 0xFFFF88012B37A000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018) [ 0.138667] ACPI: Dynamic OEM Table Load: [ 0.138672] ACPI: SSDT 0xFFFF88012BC98800 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20121018) [ 0.139772] ACPI: Dynamic OEM Table Load: [ 0.139777] ACPI: SSDT 0xFFFF88012BC98000 0005AA (v02 PmRef ApIst 00003000 INTL 20121018) [ 0.140556] ACPI: Dynamic OEM Table Load: [ 0.140559] ACPI: SSDT 0xFFFF88012B372200 000119 (v02 PmRef ApCst 00003000 INTL 20121018) [ 0.141992] ACPI : EC: EC started [ 0.142003] ACPI: Interpreter enabled [ 0.142033] ACPI: (supports S0 S3 S4 S5) [ 0.142034] ACPI: Using IOAPIC for interrupt routing [ 0.142061] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.142525] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.142530] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.143367] ACPI: Power Resource [PG01] (on) [ 0.143656] ACPI: Power Resource [PG02] (on) [ 0.143953] ACPI: Power Resource [PG00] (on) [ 0.148169] ACPI: Power Resource [WRST] (off) [ 0.148454] ACPI: Power Resource [WRST] (off) [ 0.148737] ACPI: Power Resource [WRST] (off) [ 0.149024] ACPI: Power Resource [WRST] (off) [ 0.149308] ACPI: Power Resource [WRST] (off) [ 0.149621] ACPI: Power Resource [WRST] (off) [ 0.149902] ACPI: Power Resource [WRST] (off) [ 0.150186] ACPI: Power Resource [WRST] (off) [ 0.150470] ACPI: Power Resource [WRST] (off) [ 0.150752] ACPI: Power Resource [WRST] (off) [ 0.151034] ACPI: Power Resource [WRST] (off) [ 0.151315] ACPI: Power Resource [WRST] (off) [ 0.151597] ACPI: Power Resource [WRST] (off) [ 0.151879] ACPI: Power Resource [WRST] (off) [ 0.152162] ACPI: Power Resource [WRST] (off) [ 0.152444] ACPI: Power Resource [WRST] (off) [ 0.152726] ACPI: Power Resource [WRST] (off) [ 0.153013] ACPI: Power Resource [WRST] (off) [ 0.153296] ACPI: Power Resource [WRST] (off) [ 0.153578] ACPI: Power Resource [WRST] (off) [ 0.155674] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.155678] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.157840] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.157841] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.159233] PCI host bridge to bus 0000:00 [ 0.159235] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.159236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.159237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.159238] pci_bus 0000:00: root bus resource [mem 0xce800000-0xf7ffffff window] [ 0.159239] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.159240] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.159245] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000 [ 0.159795] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 [ 0.159801] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.159805] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.159808] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.160423] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.160439] pci 0000:00:14.0: reg 0x10: [mem 0xe1300000-0xe130ffff 64bit] [ 0.160500] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.161040] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.161072] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.161088] pci 0000:00:14.2: reg 0x10: [mem 0xe132a000-0xe132afff 64bit] [ 0.161686] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.161706] pci 0000:00:16.0: reg 0x10: [mem 0xe132b000-0xe132bfff 64bit] [ 0.161768] pci 0000:00:16.0: PME# supported from D3hot [ 0.162342] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.162355] pci 0000:00:17.0: reg 0x10: [mem 0xe1328000-0xe1329fff] [ 0.162362] pci 0000:00:17.0: reg 0x14: [mem 0xe132e000-0xe132e0ff] [ 0.162368] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.162375] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.162381] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.162388] pci 0000:00:17.0: reg 0x24: [mem 0xe132c000-0xe132c7ff] [ 0.162424] pci 0000:00:17.0: PME# supported from D3hot [ 0.162988] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400 [ 0.163042] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.163593] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.163633] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400 [ 0.163687] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.164237] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.164265] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400 [ 0.164319] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.164867] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.164896] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100 [ 0.165513] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.165522] pci 0000:00:1f.2: reg 0x10: [mem 0xe1324000-0xe1327fff] [ 0.166112] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.166132] pci 0000:00:1f.3: reg 0x10: [mem 0xe1320000-0xe1323fff 64bit] [ 0.166155] pci 0000:00:1f.3: reg 0x20: [mem 0xe1310000-0xe131ffff 64bit] [ 0.166199] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.166753] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.166786] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.166827] pci 0000:00:1f.4: reg 0x10: [mem 0xe132d000-0xe132d0ff 64bit] [ 0.166877] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.167532] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.167549] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.167574] pci 0000:01:00.0: reg 0x18: [mem 0xe1204000-0xe1204fff 64bit] [ 0.167590] pci 0000:01:00.0: reg 0x20: [mem 0xe1200000-0xe1203fff 64bit] [ 0.167675] pci 0000:01:00.0: supports D1 D2 [ 0.167675] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167747] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.176975] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.176982] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.176988] pci 0000:00:1c.0: bridge window [mem 0xe1200000-0xe12fffff] [ 0.177099] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000 [ 0.177120] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1103fff 64bit] [ 0.177232] pci 0000:02:00.0: supports D1 D2 [ 0.177233] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.177303] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.189009] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.189018] pci 0000:00:1c.5: bridge window [mem 0xe1100000-0xe11fffff] [ 0.189087] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000 [ 0.189105] pci 0000:03:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff] [ 0.189224] pci 0000:03:00.0: supports D1 D2 [ 0.189225] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.189286] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.200988] pci 0000:00:1c.7: PCI bridge to [bus 03] [ 0.200997] pci 0000:00:1c.7: bridge window [mem 0xe1000000-0xe10fffff] [ 0.201817] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.201857] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.201897] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.201935] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.201974] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.202012] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.202050] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.202088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.202244] ACPI: Enabled 3 GPEs in block 00 to 7F [ 0.202258] ACPI : EC: GPE = 0x6e, I/O: command/status = 0x66, data = 0x62 [ 0.202327] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.202329] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202330] vgaarb: loaded [ 0.202331] vgaarb: bridge control possible 0000:00:02.0 [ 0.202413] PCI: Using ACPI for IRQ routing [ 0.209243] PCI: pci_cache_line_size set to 64 bytes [ 0.209313] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.209314] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.209315] e820: reserve RAM buffer [mem 0x97a5f000-0x97ffffff] [ 0.209316] e820: reserve RAM buffer [mem 0x97d5c000-0x97ffffff] [ 0.209316] e820: reserve RAM buffer [mem 0x9eb6f000-0x9fffffff] [ 0.209317] e820: reserve RAM buffer [mem 0xbb0fb000-0xbbffffff] [ 0.209318] e820: reserve RAM buffer [mem 0xbbf00000-0xbbffffff] [ 0.209319] e820: reserve RAM buffer [mem 0x130800000-0x133ffffff] [ 0.209464] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.209467] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.211514] clocksource: Switched to clocksource hpet [ 0.215280] VFS: Disk quotas dquot_6.6.0 [ 0.215311] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.215419] pnp: PnP ACPI init [ 0.215544] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.215545] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.215546] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.215548] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.215549] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.215551] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.215652] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.215653] system 00:01: [io 0xffff] has been reserved [ 0.215654] system 00:01: [io 0xffff] has been reserved [ 0.215655] system 00:01: [io 0xffff] has been reserved [ 0.215656] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.215657] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.215659] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.215721] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.215722] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.215739] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.215765] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.215766] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.215785] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.215804] pnp 00:06: Plug and Play ACPI device, IDs SYN3006 SYN0100 SYN0002 PNP0f13 (active) [ 0.215912] system 00:07: [io 0x0200-0x023f] has been reserved [ 0.215913] system 00:07: [mem 0xfedb0000-0xfedbffff] has been reserved [ 0.215915] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216131] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.216133] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.216134] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.216135] system 00:08: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.216136] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.216137] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.216138] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.216139] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.216140] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.216141] system 00:08: [mem 0xce800000-0xce81ffff] has been reserved [ 0.216143] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216299] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.216335] pnp: PnP ACPI: found 10 devices [ 0.224427] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.224448] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.224450] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.224453] pci 0000:00:1c.0: bridge window [mem 0xe1200000-0xe12fffff] [ 0.224458] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.224461] pci 0000:00:1c.5: bridge window [mem 0xe1100000-0xe11fffff] [ 0.224466] pci 0000:00:1c.7: PCI bridge to [bus 03] [ 0.224469] pci 0000:00:1c.7: bridge window [mem 0xe1000000-0xe10fffff] [ 0.224475] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.224476] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.224477] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.224478] pci_bus 0000:00: resource 7 [mem 0xce800000-0xf7ffffff window] [ 0.224479] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.224480] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.224480] pci_bus 0000:01: resource 1 [mem 0xe1200000-0xe12fffff] [ 0.224481] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff] [ 0.224482] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.224626] NET: Registered protocol family 2 [ 0.224778] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.224825] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.224890] TCP: Hash tables configured (established 32768 bind 32768) [ 0.224906] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.224919] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.225016] NET: Registered protocol family 1 [ 0.225027] pci 0000:00:02.0: Video device with shadowed ROM [ 0.225103] PCI: CLS 0 bytes, default 64 [ 0.225134] Unpacking initramfs... [ 3.484070] Freeing initrd memory: 268224K (ffff880017410000 - ffff880027a00000) [ 3.484098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.484100] software IO TLB [mem 0xa87b3000-0xac7b3000] (64MB) mapped at [ffff8800a87b3000-ffff8800ac7b2fff] [ 3.484243] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes, mapped to 0xffffc90000800000 [ 3.484244] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096 [ 3.485424] Console: switching to colour frame buffer device 128x48 [ 3.486523] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 3.486755] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 3.486812] audit: initializing netlink subsys (disabled) [ 3.486823] audit: type=2000 audit(1456845703.488:1): initialized [ 3.487212] zbud: loaded [ 3.487974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 3.488029] io scheduler noop registered [ 3.488032] io scheduler deadline registered [ 3.488060] io scheduler cfq registered (default) [ 3.488723] aer 0000:00:1c.0:pcie02: service driver aer loaded [ 3.488745] aer 0000:00:1c.5:pcie02: service driver aer loaded [ 3.488765] aer 0000:00:1c.7:pcie02: service driver aer loaded [ 3.488776] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 3.488777] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.488779] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 3.488785] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 3.488785] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 3.488788] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 3.488793] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt [ 3.488794] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 3.488796] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded [ 3.488801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.488806] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.488822] intel_idle: MWAIT substates: 0x142120 [ 3.488823] intel_idle: v0.4 model 0x5E [ 3.488823] intel_idle: lapic_timer_reliable_states 0xffffffff [ 3.489015] GHES: HEST is not enabled! [ 3.489092] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.489580] Linux agpgart interface v0.103 [ 3.489618] AMD IOMMUv2 driver by Joerg Roedel [ 3.489618] AMD IOMMUv2 functionality not available on this system [ 3.489905] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.493398] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.493401] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.493542] mousedev: PS/2 mouse device common for all mice [ 3.493578] rtc_cmos 00:03: RTC can wake from S4 [ 3.493972] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.494054] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.494064] Intel P-state driver initializing. [ 3.494066] intel_pstate: HWP enabled [ 3.494577] ledtrig-cpu: registered to indicate activity on CPUs [ 3.495238] NET: Registered protocol family 10 [ 3.495418] mip6: Mobile IPv6 [ 3.495420] NET: Registered protocol family 17 [ 3.495424] mpls_gso: MPLS GSO support [ 3.495565] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x49 [ 3.495591] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x49 [ 3.495650] microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x49 [ 3.495678] microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x49 [ 3.495732] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 3.495948] registered taskstats version 1 [ 3.495966] zswap: loaded using pool lzo/zbud [ 3.496987] rtc_cmos 00:03: setting system clock to 2016-03-01 15:21:44 UTC (1456845704) [ 3.497046] PM: Hibernation image not present or could not be loaded. [ 3.497534] Freeing unused kernel memory: 1324K (ffffffff81b25000 - ffffffff81c70000) [ 3.497535] Write protecting the kernel read-only data: 10240k [ 3.497858] Freeing unused kernel memory: 288K (ffff8800017b8000 - ffff880001800000) [ 3.499450] Freeing unused kernel memory: 1212K (ffff880001ad1000 - ffff880001c00000) [ 3.499454] ------------[ cut here ]------------ [ 3.499456] WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x632/0x800() [ 3.499458] x86/mm: Found insecure W+X mapping at address ffff88000005c000/0xffff88000005c000 [ 3.499458] Modules linked in: [ 3.499461] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.5.0-rc5+ #2 [ 3.499461] Hardware name: HP HP ProOne 400 G2 20-in Touch AiO/8063, BIOS N13 Ver. 02.02 11/12/2015 [ 3.499462] 0000000000000286 00000000f2af3108 ffffffff81302a35 ffff88012b7e3de0 [ 3.499464] ffffffff8180db27 ffffffff810798b1 0000000000000000 ffff88012b7e3e38 [ 3.499465] 8000000000000163 ffffc00000000fff 0000000000000000 ffffffff8107993c [ 3.499467] Call Trace: [ 3.499470] [] ? dump_stack+0x5c/0x77 [ 3.499472] [] ? warn_slowpath_common+0x81/0xb0 [ 3.499473] [] ? warn_slowpath_fmt+0x5c/0x80 [ 3.499475] [] ? vprintk_emit+0x37e/0x530 [ 3.499477] [] ? note_page+0x632/0x800 [ 3.499478] [] ? ptdump_walk_pgd_level_core+0x355/0x410 [ 3.499480] [] ? rest_init+0x80/0x80 [ 3.499481] [] ? kernel_init+0x19/0xe0 [ 3.499483] [] ? ret_from_fork+0x3f/0x70 [ 3.499484] [] ? rest_init+0x80/0x80 [ 3.499485] ---[ end trace 1fe832ec2a0333b4 ]--- [ 3.503453] x86/mm: Checked W+X mappings: FAILED, 121058 W+X pages found. [ 3.511182] systemd-udevd[76]: starting version 215 [ 3.511377] random: systemd-udevd urandom read with 5 bits of entropy available [ 3.516301] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 3.516305] ACPI: Sleep Button [SLPB] [ 3.516356] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 3.516358] ACPI: Power Button [PWRB] [ 3.516408] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.516410] ACPI: Power Button [PWRF] [ 3.516432] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 3.529131] wmi: Mapper loaded [ 3.531182] SCSI subsystem initialized [ 3.533982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.533994] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.534149] libata version 3.00 loaded. [ 3.534212] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 123 [ 3.535118] ahci 0000:00:17.0: version 3.0 [ 3.535262] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 3.535861] ACPI: bus type USB registered [ 3.535876] usbcore: registered new interface driver usbfs [ 3.535882] usbcore: registered new interface driver hub [ 3.535911] usbcore: registered new device driver usb [ 3.540969] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc90000672000, 00:25:ab:6b:05:e5, XID 14100800 IRQ 125 [ 3.540972] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.545432] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 3.545435] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst [ 3.568675] scsi host0: ahci [ 3.569076] scsi host1: ahci [ 3.569415] scsi host2: ahci [ 3.569670] scsi host3: ahci [ 3.569702] ata1: SATA max UDMA/133 abar m2048@0xe132c000 port 0xe132c100 irq 124 [ 3.569706] ata2: SATA max UDMA/133 abar m2048@0xe132c000 port 0xe132c180 irq 124 [ 3.569710] ata3: SATA max UDMA/133 abar m2048@0xe132c000 port 0xe132c200 irq 124 [ 3.569712] ata4: SATA max UDMA/133 abar m2048@0xe132c000 port 0xe132c280 irq 124 [ 3.569989] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.569995] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.571134] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 3.571138] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.571275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.571276] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.571277] usb usb1: Product: xHCI Host Controller [ 3.571278] usb usb1: Manufacturer: Linux 4.5.0-rc5+ xhci-hcd [ 3.571278] usb usb1: SerialNumber: 0000:00:14.0 [ 3.571398] hub 1-0:1.0: USB hub found [ 3.571418] hub 1-0:1.0: 10 ports detected [ 3.576591] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.576593] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.576618] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.576619] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.576620] usb usb2: Product: xHCI Host Controller [ 3.576620] usb usb2: Manufacturer: Linux 4.5.0-rc5+ xhci-hcd [ 3.576621] usb usb2: SerialNumber: 0000:00:14.0 [ 3.576736] hub 2-0:1.0: USB hub found [ 3.576742] hub 2-0:1.0: 4 ports detected [ 3.881843] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.883279] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 3.883287] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.883617] ata1.00: ATA-9: HGST HTS725050A7E630, GS2OA380, max UDMA/133 [ 3.883624] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.885367] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 3.885375] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.887849] usb 1-3: new low-speed USB device number 2 using xhci_hcd [ 3.917208] ata1.00: configured for UDMA/133 [ 3.917775] scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 A380 PQ: 0 ANSI: 5 [ 4.021986] usb 1-3: New USB device found, idVendor=045e, idProduct=07b9 [ 4.021993] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.021996] usb 1-3: Product: USB Keyboard [ 4.021999] usb 1-3: Manufacturer: LITEON Technology [ 4.027795] hidraw: raw HID events driver (C) Jiri Kosina [ 4.031870] usbcore: registered new interface driver usbhid [ 4.031876] usbhid: USB HID core driver [ 4.033401] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:07B9.0001/input/input5 [ 4.088235] hid-generic 0003:045E:07B9.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:14.0-3/input0 [ 4.191812] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 4.253856] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.258183] ata2.00: ATAPI: hp CDDVDW SU-208GB, HN00, max UDMA/100 [ 4.265466] ata2.00: configured for UDMA/100 [ 4.273307] scsi 1:0:0:0: CD-ROM hp CDDVDW SU-208GB HN00 PQ: 0 ANSI: 5 [ 4.320947] usb 1-4: New USB device found, idVendor=0781, idProduct=5580 [ 4.320954] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.320958] usb 1-4: Product: Extreme [ 4.320960] usb 1-4: Manufacturer: SanDisk [ 4.320963] usb 1-4: SerialNumber: AA011217140521078151 [ 4.324937] usb-storage 1-4:1.0: USB Mass Storage device detected [ 4.325444] scsi host4: usb-storage 1-4:1.0 [ 4.325597] usbcore: registered new interface driver usb-storage [ 4.326674] usbcore: registered new interface driver uas [ 4.483859] tsc: Refined TSC clocksource calibration: 3191.999 MHz [ 4.483867] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c398820, max_idle_ns: 440795273435 ns [ 4.487922] usb 1-6: new full-speed USB device number 4 using xhci_hcd [ 4.593844] ata3: SATA link down (SStatus 4 SControl 300) [ 4.623214] usb 1-6: not running at top speed; connect to a high speed hub [ 4.636379] usb 1-6: New USB device found, idVendor=0457, idProduct=1118 [ 4.636386] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.636389] usb 1-6: Product: SiS HID Touch Controller [ 4.636392] usb 1-6: Manufacturer: USBest Technology [ 4.751867] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 4.883338] usb 1-7: New USB device found, idVendor=0a5c, idProduct=640b [ 4.883344] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.883348] usb 1-7: Product: BCM20702A0 [ 4.883351] usb 1-7: Manufacturer: Broadcom Corp [ 4.883354] usb 1-7: SerialNumber: B88687BDD5EF [ 4.901089] ata4: SATA link down (SStatus 4 SControl 300) [ 4.907161] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.907168] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.907303] sd 0:0:0:0: [sda] Write Protect is off [ 4.907306] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.907337] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.920348] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.920351] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.920592] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.921505] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.921613] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.981782] sda: sda1 sda2 [ 4.982923] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.995949] usb 1-10: new high-speed USB device number 6 using xhci_hcd [ 5.166657] usb 1-10: New USB device found, idVendor=05c8, idProduct=037e [ 5.166664] usb 1-10: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 5.166668] usb 1-10: Product: HP High Definition 1MP Webcam [ 5.166671] usb 1-10: Manufacturer: Sonix Technology Co., Ltd. [ 5.218361] [drm] Initialized drm 1.1.0 20060810 [ 5.251691] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x1912 rev=0x06 flags=need_gfx_hws,is_skylake,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 5.251704] [drm:intel_detect_pch] Found SunrisePoint PCH [ 5.252105] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 262144K, usable: 261120K [ 5.252106] [drm] Memory usable by graphics device = 4096M [ 5.252107] [drm:i915_gem_gtt_init] GMADR size = 256M [ 5.252108] [drm:i915_gem_gtt_init] GTT stolen size = 256M [ 5.252109] [drm:i915_gem_gtt_init] ppgtt mode: 3 [ 5.252110] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 5.252111] fb: switching to inteldrmfb from simple [ 5.252126] Console: switching to colour dummy device 80x25 [ 5.252209] [drm] Replacing VGA console driver [ 5.252223] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbbe5f018 [ 5.252229] [drm:intel_opregion_setup] Public ACPI methods supported [ 5.252230] [drm:intel_opregion_setup] SWSCI supported [ 5.312958] [drm:swsci] SWSCI request timed out [ 5.312963] [drm:swsci] SWSCI request already in progress [ 5.312966] [drm:swsci_setup] SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001 [ 5.312968] [drm:intel_opregion_setup] ASLE supported [ 5.312970] [drm:intel_opregion_setup] ASLE extension supported [ 5.312972] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 5.313661] [drm:intel_device_info_runtime_init] slice total: 1 [ 5.313663] [drm:intel_device_info_runtime_init] subslice total: 3 [ 5.313665] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 5.313667] [drm:intel_device_info_runtime_init] EU total: 23 [ 5.313668] [drm:intel_device_info_runtime_init] EU per subslice: 8 [ 5.313670] [drm:intel_device_info_runtime_init] has slice power gating: n [ 5.313672] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 5.313673] [drm:intel_device_info_runtime_init] has EU power gating: y [ 5.313676] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.313677] [drm] Driver supports precise vblank timestamp query. [ 5.313680] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 5.313682] [drm:intel_bios_init] VBT signature "$VBT SKYLAKE ", BDB version 196 [ 5.313685] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 5.313687] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 5.313690] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 5.313693] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 5.313697] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 0 118360 1600 1624 1704 2112 900 901 904 934 0x8 0xa [ 5.313699] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 5.313702] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 5.313704] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 5.313706] [drm:parse_driver_features] DRRS State Enabled:1 [ 5.313710] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 5.313712] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 5.313715] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 5.313717] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 5.313761] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 5.313767] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 5.313772] [drm:intel_power_well_enable] enabling power well 1 [ 5.313775] [drm:intel_power_well_enable] enabling MISC IO power well [ 5.313778] [drm:intel_power_well_enable] enabling always-on [ 5.313780] [drm:intel_power_well_enable] enabling DC off [ 5.313783] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 5.313786] [drm:intel_power_well_enable] enabling power well 2 [ 5.313789] [drm:intel_power_well_enable] enabling DDI A/E power well [ 5.313791] [drm:intel_power_well_enable] enabling DDI B power well [ 5.313794] [drm:skl_set_power_well] Enabling DDI B power well [ 5.313795] [drm:intel_power_well_enable] enabling DDI C power well [ 5.313798] [drm:skl_set_power_well] Enabling DDI C power well [ 5.313799] [drm:intel_power_well_enable] enabling DDI D power well [ 5.313802] [drm:skl_set_power_well] Enabling DDI D power well [ 5.313804] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 5.313814] [drm:intel_csr_ucode_init] Loading i915/skl_dmc_ver1.bin [ 5.314357] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26) [ 5.316987] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec) [ 5.316993] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec) [ 5.316996] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec) [ 5.316999] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec) [ 5.317001] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec) [ 5.317004] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec) [ 5.317006] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec) [ 5.317009] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec) [ 5.317012] [drm:intel_modeset_init] 2 display pipes available. [ 5.317048] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz [ 5.317051] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz [ 5.317053] [drm:intel_update_max_cdclk] Max dotclock rate: 675000 kHz [ 5.317064] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.317391] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 5.317568] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000 [ 5.317572] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 5.317575] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 5.317577] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 5.317581] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 5.317855] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 5.317928] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 5.318983] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00 [ 5.319916] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 5.319922] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.319925] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 5.319929] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 5.320029] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 5.320225] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.320419] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.320616] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.320809] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.321001] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.321194] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.321386] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.321583] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.321775] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.321967] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0 [ 5.322013] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 5.322063] [drm:intel_dp_init_connector] Adding DP connector on port B [ 5.322149] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 5.322487] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled [ 5.322493] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled [ 5.322497] [drm:intel_modeset_readout_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 5.322501] [drm:intel_modeset_readout_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 5.322505] [drm:intel_modeset_readout_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 5.322515] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: enabled, pipe A [ 5.322519] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: disabled, pipe A [ 5.322523] [drm:intel_modeset_readout_hw_state] [ENCODER:35:DP MST-35] hw state readout: disabled, pipe A [ 5.322526] [drm:intel_modeset_readout_hw_state] [ENCODER:36:DP MST-36] hw state readout: disabled, pipe B [ 5.322529] [drm:intel_modeset_readout_hw_state] [ENCODER:37:DP MST-37] hw state readout: disabled, pipe C [ 5.322544] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:eDP-1] hw state readout: enabled [ 5.322550] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:DP-1] hw state readout: disabled [ 5.322556] [drm:intel_modeset_readout_hw_state] [CONNECTOR:38:HDMI-A-1] hw state readout: disabled [ 5.322566] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff880000122c00 [ 5.322614] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff880000122c00 for pipe A [ 5.322618] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 5.322621] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 5.322627] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.322633] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4147292, gmch_n: 8388608, link_m: 230405, link_n: 524288, tu: 64 [ 5.322638] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.322642] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.322645] [drm:intel_dump_pipe_config] requested mode: [ 5.322653] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 118654 1600 1624 1704 2112 900 901 904 934 0x40 0x9 [ 5.322657] [drm:intel_dump_pipe_config] adjusted mode: [ 5.322664] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 118654 1600 1624 1704 2112 900 901 904 934 0x40 0x9 [ 5.322671] [drm:intel_dump_crtc_timings] crtc timings: 118654 1600 1624 1704 2112 900 901 904 934, type: 0x40 flags: 0x9 [ 5.322674] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.322678] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 5.322683] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 5.322687] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.322692] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x06400384, enabled [ 5.322695] [drm:intel_dump_pipe_config] ips: 0 [ 5.322699] [drm:intel_dump_pipe_config] double wide: 0 [ 5.322704] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x13, cfgcr1: 0x0, cfgcr2: 0x0 [ 5.322707] [drm:intel_dump_pipe_config] planes on this crtc [ 5.322713] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 5.322718] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 5.322722] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 5.322729] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff8800256aa800 for pipe B [ 5.322733] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 5.322736] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 5.322741] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.322747] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.322752] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.322755] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.322758] [drm:intel_dump_pipe_config] requested mode: [ 5.322764] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.322768] [drm:intel_dump_pipe_config] adjusted mode: [ 5.322774] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 5.322779] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 5.322782] [drm:intel_dump_pipe_config] port clock: 0 [ 5.322785] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 5.322788] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 5.322792] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.322795] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.322797] [drm:intel_dump_pipe_config] ips: 0 [ 5.322799] [drm:intel_dump_pipe_config] double wide: 0 [ 5.322802] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 5.322804] [drm:intel_dump_pipe_config] planes on this crtc [ 5.322807] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = -1 [ 5.322810] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 5.322813] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 5.322843] [drm:intel_power_well_disable] disabling DDI D power well [ 5.322847] [drm:skl_set_power_well] Disabling DDI D power well [ 5.322849] [drm:intel_power_well_disable] disabling DDI C power well [ 5.322852] [drm:skl_set_power_well] Disabling DDI C power well [ 5.322854] [drm:intel_power_well_disable] disabling DDI B power well [ 5.322858] [drm:skl_set_power_well] Disabling DDI B power well [ 5.322860] [drm:intel_power_well_disable] disabling power well 2 [ 5.322866] [drm:skl_set_power_well] Disabling power well 2 [ 5.322875] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000 [ 5.322879] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=300000 [ 5.322886] [drm:i915_pages_create_for_stolen] offset=0x0, size=3145728 [ 5.322896] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88002569adc0 [ 5.323215] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 300000 [ 5.323220] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [300000, fffff000] [ 5.325896] [drm:i915_gem_context_init] LR context support initialized [ 5.325918] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00300000 [ 5.326092] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 5.326115] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 5.326126] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 5.326135] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 5.326200] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz [ 5.326297] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 5.326303] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 5.326307] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 5.326310] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 5.326314] [drm:intel_fbdev_init_bios] fb not wide enough for plane A (6400 vs 4096) [ 5.326316] [drm:intel_fbdev_init_bios] BIOS fb not suitable for all pipes, not using [ 5.326427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] [ 5.326435] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 5.326473] scsi 4:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6 [ 5.327376] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 5.327399] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 5.327692] sd 4:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 5.327953] sd 4:0:0:0: [sdb] Write Protect is off [ 5.327961] sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 5.328215] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.328303] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 5.329667] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] status updated from unknown to connected [ 5.329683] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] probed modes : [ 5.329689] [drm:drm_mode_debug_printmodeline] Modeline 42:"1600x900" 60 118360 1600 1624 1704 2112 900 901 904 934 0x8 0xa [ 5.329694] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] [ 5.329697] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 5.329701] [drm:intel_power_well_enable] enabling power well 2 [ 5.329707] [drm:skl_set_power_well] Enabling power well 2 [ 5.329726] [drm:intel_power_well_disable] disabling power well 2 [ 5.329733] [drm:skl_set_power_well] Disabling power well 2 [ 5.329736] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] status updated from unknown to disconnected [ 5.329740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] disconnected [ 5.329743] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] [ 5.329746] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-1] [ 5.329762] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 5.330594] sdb: sdb1 sdb2 [ 5.332227] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 5.338233] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.338992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 5.339077] [drm] Initialized i915 1.6.0 20160214 for 0000:00:02.0 on minor 0 [ 5.455693] [drm:intel_hdmi_detect] Live status not up! [ 5.455702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] status updated from unknown to disconnected [ 5.455712] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] disconnected [ 5.455719] [drm:drm_setup_crtcs] [ 5.455723] [drm:drm_enable_connectors] connector 28 enabled? yes [ 5.455727] [drm:drm_enable_connectors] connector 34 enabled? no [ 5.455730] [drm:drm_enable_connectors] connector 38 enabled? no [ 5.455735] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 5.455739] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 5.455746] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1600x900 [ 5.455749] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 5.455753] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 5.455758] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 21 (0,0) [ 5.455765] [drm:intelfb_create] no BIOS fb, allocating a new one [ 5.455769] [drm:i915_gem_object_create_stolen] creating stolen object: size=57f000 [ 5.455780] [drm:i915_pages_create_for_stolen] offset=0x300000, size=5763072 [ 5.456339] [drm:intelfb_create] allocated 1600x900 fb: 0x00340000, bo ffff88011fe09dc0 [ 5.456539] fbcon: inteldrmfb (fb0) is primary device [ 5.456652] [drm:drm_atomic_state_init] Allocated atomic state ffff880027589000 [ 5.456657] [drm:drm_atomic_get_plane_state] Added [PLANE:18:plane-0] ffff8800269d4dc0 state to ffff880027589000 [ 5.456660] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff88011fcec000 state to ffff880027589000 [ 5.456663] [drm:drm_atomic_get_plane_state] Added [PLANE:20:plane-1] ffff8800269d4d00 state to ffff880027589000 [ 5.456664] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4d00 to [NOCRTC] [ 5.456665] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800269d4d00 [ 5.456667] [drm:drm_atomic_get_plane_state] Added [PLANE:22:plane-2] ffff8800269d4c40 state to ffff880027589000 [ 5.456669] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4c40 to [NOCRTC] [ 5.456670] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800269d4c40 [ 5.456672] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-3] ffff8800269d4b80 state to ffff880027589000 [ 5.456674] [drm:drm_atomic_get_plane_state] Added [PLANE:24:plane-4] ffff8800269d4ac0 state to ffff880027589000 [ 5.456676] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4ac0 to [NOCRTC] [ 5.456677] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800269d4ac0 [ 5.456679] [drm:drm_atomic_get_plane_state] Added [PLANE:26:plane-5] ffff8800269d4a00 state to ffff880027589000 [ 5.456680] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4a00 to [NOCRTC] [ 5.456681] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800269d4a00 [ 5.456685] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff88011fcec000 [ 5.456686] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4dc0 to [CRTC:21:crtc-0] [ 5.456688] [drm:drm_atomic_set_fb_for_plane] Set [FB:44] for plane state ffff8800269d4dc0 [ 5.456691] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:28] ffff88011fdabac0 state to ffff880027589000 [ 5.456693] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 5.456695] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88011fdabac0 to [NOCRTC] [ 5.456697] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88011fdabac0 to [CRTC:21:crtc-0] [ 5.456700] [drm:drm_atomic_get_crtc_state] Added [CRTC:25:crtc-1] ffff8800274d0c00 state to ffff880027589000 [ 5.456701] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800274d0c00 [ 5.456702] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4b80 to [NOCRTC] [ 5.456703] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800269d4b80 [ 5.456705] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 5.456707] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:25:crtc-1] to ffff880027589000 [ 5.456709] [drm:drm_atomic_check_only] checking ffff880027589000 [ 5.456712] [drm:drm_atomic_helper_check_modeset] [CRTC:21:crtc-0] mode changed [ 5.456714] [drm:update_connector_routing] Updating routing for [CONNECTOR:28:eDP-1] [ 5.456717] [drm:update_connector_routing] [CONNECTOR:28:eDP-1] keeps [ENCODER:27:TMDS-27], now on [CRTC:21:crtc-0] [ 5.456719] [drm:drm_atomic_helper_check_modeset] [CRTC:21:crtc-0] needs all connectors, enable: y, active: y [ 5.456721] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 5.456724] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 5.456727] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains [ 5.456728] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 5.456733] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:21] scaler_user index 0.31 [ 5.456735] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 5.456737] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 118360KHz [ 5.456740] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 5.456742] [drm:intel_dp_compute_config] DP link bw required 213048 available 432000 [ 5.456744] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 5.456747] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff88011fcec000 for pipe A [ 5.456748] [drm:intel_dump_pipe_config] cpu_transcoder: D [ 5.456749] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 5.456752] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.456754] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4136981, gmch_n: 8388608, link_m: 229832, link_n: 524288, tu: 64 [ 5.456756] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.456758] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.456758] [drm:intel_dump_pipe_config] requested mode: [ 5.456762] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 118360 1600 1624 1704 2112 900 901 904 934 0x8 0xa [ 5.456763] [drm:intel_dump_pipe_config] adjusted mode: [ 5.456766] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 0 118360 1600 1624 1704 2112 900 901 904 934 0x8 0xa [ 5.456769] [drm:intel_dump_crtc_timings] crtc timings: 118360 1600 1624 1704 2112 900 901 904 934, type: 0x8 flags: 0xa [ 5.456770] [drm:intel_dump_pipe_config] port clock: 270000 [ 5.456771] [drm:intel_dump_pipe_config] pipe src size: 1600x900 [ 5.456773] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 5.456775] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.456776] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.456777] [drm:intel_dump_pipe_config] ips: 0 [ 5.456778] [drm:intel_dump_pipe_config] double wide: 0 [ 5.456780] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 5.456781] [drm:intel_dump_pipe_config] planes on this crtc [ 5.456785] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled [ 5.456788] [drm:intel_dump_pipe_config] FB:41, fb = 1024x768 format = 0x34325258 [ 5.456788] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1024x768 dst (0, 0) 1024x768 [ 5.456790] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 5.456792] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 5.456797] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0 [ 5.456799] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:18] with fb 44 [ 5.456801] [drm:intel_plane_atomic_calc_changes] [PLANE:18] visible 1 -> 1, off 1, on 1, ms 1 [ 5.456804] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:21] scaler_user index 0.31 [ 5.456807] [drm:drm_atomic_commit] commiting ffff880027589000 [ 5.456832] [drm:intel_edp_backlight_off] [ 5.483980] clocksource: Switched to clocksource tsc [ 5.659750] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 5.659767] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling [ 5.659788] [drm:intel_disable_pipe] disabling pipe A [ 5.666898] [drm:edp_panel_off] Turn eDP port A panel power off [ 5.666921] [drm:wait_panel_off] Wait for panel power off time [ 5.666939] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 5.727653] [drm:wait_panel_status] Wait complete [ 5.727667] [drm:intel_disable_shared_dpll] disable DPLL 1 (active 1, on? 1) for crtc 21 [ 5.727671] [drm:intel_disable_shared_dpll] disabling DPLL 1 [ 5.727701] [drm:edp_panel_on] Turn eDP port A panel power on [ 5.727709] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 6.271883] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 6.312339] [drm:wait_panel_status] Wait complete [ 6.312365] [drm:wait_panel_on] Wait for panel power on [ 6.312382] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 6.514568] [drm:wait_panel_status] Wait complete [ 6.514588] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 6.514636] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 6.516575] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 6.516577] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 6.516579] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 6.518044] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 6.519809] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 6.520255] [drm:skylake_pfit_enable] for crtc_state = ffff88011fcec000 [ 6.520305] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 6.520307] [drm:intel_enable_pipe] enabling pipe A [ 6.520311] [drm:intel_edp_backlight_on] [ 6.520312] [drm:intel_panel_enable_backlight] pipe A [ 6.520350] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 6.520390] [drm:intel_psr_enable] PSR not supported by this panel [ 6.520390] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 6.537140] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1] [ 6.537143] [drm:check_encoder_state] [ENCODER:27:TMDS-27] [ 6.537144] [drm:check_encoder_state] [ENCODER:33:TMDS-33] [ 6.537144] [drm:check_encoder_state] [ENCODER:35:DP MST-35] [ 6.537145] [drm:check_encoder_state] [ENCODER:36:DP MST-36] [ 6.537145] [drm:check_encoder_state] [ENCODER:37:DP MST-37] [ 6.537147] [drm:check_crtc_state] [CRTC:21] [ 6.537156] [drm:check_shared_dpll_state] DPLL 1 [ 6.537157] [drm:check_shared_dpll_state] DPLL 2 [ 6.537158] [drm:check_shared_dpll_state] DPLL 3 [ 6.537159] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff880027589000 [ 6.537162] [drm:drm_atomic_state_free] Freeing atomic state ffff880027589000 [ 6.537170] [drm:drm_fb_helper_hotplug_event] [ 6.537171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] [ 6.537172] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 6.538040] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 6.538905] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 6.540179] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] probed modes : [ 6.540181] [drm:drm_mode_debug_printmodeline] Modeline 42:"1600x900" 60 118360 1600 1624 1704 2112 900 901 904 934 0x8 0xa [ 6.540182] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] [ 6.540182] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 6.540183] [drm:intel_power_well_enable] enabling power well 2 [ 6.540184] [drm:skl_set_power_well] Enabling power well 2 [ 6.540196] [drm:intel_power_well_disable] disabling power well 2 [ 6.540199] [drm:skl_set_power_well] Disabling power well 2 [ 6.540200] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] disconnected [ 6.540201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] [ 6.540201] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-1] [ 6.667860] [drm:intel_hdmi_detect] Live status not up! [ 6.667860] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] disconnected [ 6.667868] [drm:drm_setup_crtcs] [ 6.667871] [drm:drm_enable_connectors] connector 28 enabled? yes [ 6.667873] [drm:drm_enable_connectors] connector 34 enabled? no [ 6.667874] [drm:drm_enable_connectors] connector 38 enabled? no [ 6.667877] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 6.667879] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 6.667882] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 1600x900 [ 6.667884] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 6.667885] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 6.667888] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 21 (0,0) [ 6.667898] [drm:drm_atomic_state_init] Allocated atomic state ffff880027589000 [ 6.667904] [drm:drm_atomic_get_plane_state] Added [PLANE:18:plane-0] ffff8800256a8400 state to ffff880027589000 [ 6.667908] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff8800256aa800 state to ffff880027589000 [ 6.667911] [drm:drm_atomic_get_plane_state] Added [PLANE:20:plane-1] ffff8800256a8ac0 state to ffff880027589000 [ 6.667912] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800256a8ac0 to [NOCRTC] [ 6.667914] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800256a8ac0 [ 6.667916] [drm:drm_atomic_get_plane_state] Added [PLANE:22:plane-2] ffff8800256a8b80 state to ffff880027589000 [ 6.667917] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800256a8b80 to [NOCRTC] [ 6.667919] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800256a8b80 [ 6.667921] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-3] ffff8800256a8c40 state to ffff880027589000 [ 6.667924] [drm:drm_atomic_get_plane_state] Added [PLANE:24:plane-4] ffff8800256a8d00 state to ffff880027589000 [ 6.667925] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800256a8d00 to [NOCRTC] [ 6.667926] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800256a8d00 [ 6.667929] [drm:drm_atomic_get_plane_state] Added [PLANE:26:plane-5] ffff8800256a8dc0 state to ffff880027589000 [ 6.667930] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800256a8dc0 to [NOCRTC] [ 6.667931] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800256a8dc0 [ 6.667935] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff8800256aa800 [ 6.667937] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800256a8400 to [CRTC:21:crtc-0] [ 6.667939] [drm:drm_atomic_set_fb_for_plane] Set [FB:44] for plane state ffff8800256a8400 [ 6.667943] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:28] ffff88008c9a1120 state to ffff880027589000 [ 6.667945] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 6.667947] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88008c9a1120 to [NOCRTC] [ 6.667949] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88008c9a1120 to [CRTC:21:crtc-0] [ 6.667952] [drm:drm_atomic_get_crtc_state] Added [CRTC:25:crtc-1] ffff880000122c00 state to ffff880027589000 [ 6.667954] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff880000122c00 [ 6.667956] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800256a8c40 to [NOCRTC] [ 6.667957] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800256a8c40 [ 6.667959] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 6.667961] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:25:crtc-1] to ffff880027589000 [ 6.667963] [drm:drm_atomic_check_only] checking ffff880027589000 [ 6.667967] [drm:update_connector_routing] Updating routing for [CONNECTOR:28:eDP-1] [ 6.667971] [drm:update_connector_routing] [CONNECTOR:28:eDP-1] keeps [ENCODER:27:TMDS-27], now on [CRTC:21:crtc-0] [ 6.667977] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0 [ 6.667979] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:18] with fb 44 [ 6.667982] [drm:intel_plane_atomic_calc_changes] [PLANE:18] visible 1 -> 1, off 0, on 0, ms 0 [ 6.667986] [drm:drm_atomic_commit] commiting ffff880027589000 [ 6.668018] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff880027589000 [ 6.668023] [drm:drm_atomic_state_free] Freeing atomic state ffff880027589000 [ 6.668034] Console: switching to colour frame buffer device 200x56 [ 6.668047] [drm:drm_atomic_state_init] Allocated atomic state ffff880027589000 [ 6.668050] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff8800274d0c00 state to ffff880027589000 [ 6.668052] [drm:drm_atomic_get_plane_state] Added [PLANE:18:plane-0] ffff8800269d4a00 state to ffff880027589000 [ 6.668055] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff8800274d0c00 [ 6.668057] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4a00 to [CRTC:21:crtc-0] [ 6.668058] [drm:drm_atomic_set_fb_for_plane] Set [FB:44] for plane state ffff8800269d4a00 [ 6.668061] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:28] ffff88008c9a1140 state to ffff880027589000 [ 6.668063] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 6.668065] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88008c9a1140 to [NOCRTC] [ 6.668067] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88008c9a1140 to [CRTC:21:crtc-0] [ 6.668069] [drm:drm_atomic_get_crtc_state] Added [CRTC:25:crtc-1] ffff88011fcec000 state to ffff880027589000 [ 6.668071] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-3] ffff8800269d4b80 state to ffff880027589000 [ 6.668073] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff88011fcec000 [ 6.668074] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800269d4b80 to [NOCRTC] [ 6.668075] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800269d4b80 [ 6.668077] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027589000 [ 6.668080] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:25:crtc-1] to ffff880027589000 [ 6.668081] [drm:drm_atomic_check_only] checking ffff880027589000 [ 6.668084] [drm:update_connector_routing] Updating routing for [CONNECTOR:28:eDP-1] [ 6.668086] [drm:update_connector_routing] [CONNECTOR:28:eDP-1] keeps [ENCODER:27:TMDS-27], now on [CRTC:21:crtc-0] [ 6.668089] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0 [ 6.668090] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:18] with fb 44 [ 6.668092] [drm:intel_plane_atomic_calc_changes] [PLANE:18] visible 1 -> 1, off 0, on 0, ms 0 [ 6.668095] [drm:drm_atomic_commit] commiting ffff880027589000 [ 6.668112] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff880027589000 [ 6.668116] [drm:drm_atomic_state_free] Freeing atomic state ffff880027589000 [ 6.676159] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.812217] [drm] RC6 on [ 6.903640] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.029245] random: nonblocking pool is initialized [ 7.485204] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 7.485582] systemd[1]: Detected architecture 'x86-64'. [ 7.731802] systemd[1]: Inserted module 'autofs4' [ 7.746862] systemd[1]: Set hostname to . [ 8.437944] systemd[1]: Found ordering cycle on basic.target/start [ 8.437954] systemd[1]: Found dependency on sysinit.target/start [ 8.437961] systemd[1]: Found dependency on rpcbind.service/start [ 8.437967] systemd[1]: Found dependency on network-online.target/start [ 8.437972] systemd[1]: Found dependency on network.target/start [ 8.437976] systemd[1]: Found dependency on iqpchostname.service/start [ 8.437981] systemd[1]: Found dependency on dbus.service/start [ 8.437986] systemd[1]: Found dependency on basic.target/start [ 8.437991] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start [ 8.437998] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start [ 8.438853] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 8.438966] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.438987] systemd[1]: Starting Remote File Systems (Pre). [ 8.439135] systemd[1]: Reached target Remote File Systems (Pre). [ 8.439158] systemd[1]: Starting Encrypted Volumes. [ 8.439280] systemd[1]: Reached target Encrypted Volumes. [ 8.439316] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 8.439798] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.439824] systemd[1]: Starting Swap. [ 8.439936] systemd[1]: Reached target Swap. [ 8.439953] systemd[1]: Expecting device dev-disk-by\x2dlabel-EFI.device... [ 8.440069] systemd[1]: Starting Root Slice. [ 8.440207] systemd[1]: Created slice Root Slice. [ 8.440224] systemd[1]: Starting User and Session Slice. [ 8.440403] systemd[1]: Created slice User and Session Slice. [ 8.440422] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 8.440599] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.440617] systemd[1]: Starting Delayed Shutdown Socket. [ 8.440772] systemd[1]: Listening on Delayed Shutdown Socket. [ 8.440789] systemd[1]: Starting Journal Socket (/dev/log). [ 8.440952] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.440976] systemd[1]: Starting udev Control Socket. [ 8.441120] systemd[1]: Listening on udev Control Socket. [ 8.441141] systemd[1]: Starting udev Kernel Socket. [ 8.441281] systemd[1]: Listening on udev Kernel Socket. [ 8.441303] systemd[1]: Starting Journal Socket. [ 8.441458] systemd[1]: Listening on Journal Socket. [ 8.441495] systemd[1]: Starting System Slice. [ 8.441664] systemd[1]: Created slice System Slice. [ 8.441693] systemd[1]: Started File System Check on Root Device. [ 8.441710] systemd[1]: Starting system-openvpn.slice. [ 8.441900] systemd[1]: Created slice system-openvpn.slice. [ 8.441918] systemd[1]: Starting system-getty.slice. [ 8.442097] systemd[1]: Created slice system-getty.slice. [ 8.442137] systemd[1]: Starting Increase datagram queue length... [ 8.452108] systemd[1]: Mounting Debug File System... [ 8.514528] systemd[1]: Starting Load Kernel Modules... [ 8.524091] systemd[1]: Mounting Huge Pages File System... [ 8.525188] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 8.556110] systemd[1]: Started Set Up Additional Binary Formats. [ 8.556194] systemd[1]: Mounting POSIX Message Queue File System... [ 8.572076] systemd[1]: Starting udev Coldplug all Devices... [ 8.573162] systemd[1]: Starting LSB: NFS support files common to client and server... [ 8.574047] systemd[1]: Starting Slices. [ 8.574257] systemd[1]: Reached target Slices. [ 8.599162] systemd[1]: Started Load Kernel Modules. [ 8.599502] systemd[1]: Starting Apply Kernel Variables... [ 8.615880] systemd[1]: Mounted Configuration File System. [ 8.615897] systemd[1]: Mounted FUSE Control File System. [ 8.623109] systemd[1]: Started udev Coldplug all Devices. [ 8.751381] systemd[1]: Started Apply Kernel Variables. [ 8.769147] systemd[1]: Mounted POSIX Message Queue File System. [ 8.769327] systemd[1]: Mounted Huge Pages File System. [ 8.769471] systemd[1]: Mounted Debug File System. [ 8.769986] systemd[1]: Started Increase datagram queue length. [ 8.770697] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 8.783965] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.800236] systemd[1]: Starting Syslog Socket. [ 8.800481] systemd[1]: Listening on Syslog Socket. [ 8.800573] systemd[1]: Starting Journal Service... [ 8.801683] systemd[1]: Started Journal Service. [ 9.187128] systemd-udevd[210]: starting version 215 [ 9.543753] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 9.543797] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 9.543801] [drm:intel_power_well_disable] disabling DC off [ 9.543806] [drm:skl_enable_dc6] Enabling DC6 [ 9.543809] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 10.289120] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.349503] i801_smbus 0000:00:1f.4: enabling device (0100 -> 0103) [ 10.349518] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255) [ 10.349525] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.515270] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 10.671810] tpm_tis 00:09: 1.2 TPM (device-id 0x1B, rev-id 16) [ 11.142440] input: USBest Technology SiS HID Touch Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:0457:1118.0002/input/input7 [ 11.142655] hid-multitouch 0003:0457:1118.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0-6/input0 [ 11.154150] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 11.249909] EFI Variables Facility v0.08 2004-May-17 [ 11.468027] pstore: Registered efi as persistent store backend [ 11.469256] media: Linux media interface: v0.10 [ 11.495205] Error: Driver 'pcspkr' is already registered, aborting... [ 11.651293] ppdev: user-space parallel port driver [ 12.183052] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88008cb44860 (20160108/exresop-593) [ 12.183056] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160108/dswexec-460) [ 12.183059] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff88012bc9ad60), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.183063] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88012bc9ad10), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.183598] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8800269441a0 (20160108/exresop-593) [ 12.183600] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160108/dswexec-460) [ 12.183602] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff88012bc9ad60), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.183605] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88012bc9ad10), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.184145] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88008cb447d0 (20160108/exresop-593) [ 12.184147] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160108/dswexec-460) [ 12.184149] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff88012bc9ad60), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.184152] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88012bc9ad10), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.184192] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 12.184824] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff88008cb448f0 (20160108/exresop-593) [ 12.184826] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20160108/dswexec-460) [ 12.184828] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff88012bc9ad60), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.184831] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88012bc9ad10), AE_AML_OPERAND_TYPE (20160108/psparse-542) [ 12.184892] ACPI Error: Attempt to CreateField of length zero (20160108/dsopcode-168) [ 12.184894] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff88012bc9adb0), AE_AML_OPERAND_VALUE (20160108/psparse-542) [ 12.184898] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff88012bc9ad10), AE_AML_OPERAND_VALUE (20160108/psparse-542) [ 12.288600] AVX2 version of gcm_enc/dec engaged. [ 12.288607] AES CTR mode by8 optimization enabled [ 12.381568] Linux video capture interface: v2.00 [ 13.239045] snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102) [ 13.239149] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 13.268284] [drm:intel_power_well_enable] enabling DC off [ 13.268293] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 13.268298] [drm:intel_power_well_enable] enabling power well 2 [ 13.268302] [drm:skl_set_power_well] Enabling power well 2 [ 13.349028] uvcvideo: Found UVC 1.00 device HP High Definition 1MP Webcam (05c8:037e) [ 13.374417] uvcvideo 1-10:1.0: Entity type for entity Extension 3 was not initialized! [ 13.374419] uvcvideo 1-10:1.0: Entity type for entity Processing 2 was not initialized! [ 13.374421] uvcvideo 1-10:1.0: Entity type for entity Camera 1 was not initialized! [ 13.374494] input: HP High Definition 1MP Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input12 [ 13.374533] usbcore: registered new interface driver uvcvideo [ 13.374534] USB Video Class driver (1.1.1) [ 13.657520] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 13.972016] wl: module license 'MIXED/Proprietary' taints kernel. [ 13.972023] Disabling lock debugging due to kernel taint [ 13.979602] wl 0000:02:00.0: enabling device (0100 -> 0102) [ 13.989242] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3228: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:line [ 13.989251] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 13.989256] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 13.989260] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 13.989264] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 13.989269] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 13.989273] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 14.011131] wlan0: Broadcom BCM4359 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) [ 14.153806] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937 [ 14.153813] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 14.240406] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 14.255981] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 14.257911] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 14.258160] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 14.258360] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 14.258564] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 14.258785] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 14.258975] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 14.273982] [drm:intel_power_well_disable] disabling power well 2 [ 14.273997] [drm:skl_set_power_well] Disabling power well 2 [ 14.274001] [drm:intel_power_well_disable] disabling DC off [ 14.274006] [drm:skl_enable_dc6] Enabling DC6 [ 14.274011] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 14.439165] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 14.540116] Bluetooth: Core ver 2.21 [ 14.540162] NET: Registered protocol family 31 [ 14.540166] Bluetooth: HCI device and connection manager initialized [ 14.540173] Bluetooth: HCI socket layer initialized [ 14.540179] Bluetooth: L2CAP socket layer initialized [ 14.540191] Bluetooth: SCO socket layer initialized [ 14.559072] systemd-journald[208]: Received request to flush runtime journal from PID 1 [ 15.139497] usbcore: registered new interface driver btusb [ 15.144633] Bluetooth: hci0: BCM: chip id 63 [ 15.153208] kvm: disabled by bios [ 15.161261] Bluetooth: hci0: BCM20702A [ 15.163650] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 15.187033] kvm: disabled by bios [ 15.218472] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-640b.hcd failed with error -2 [ 15.218484] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-640b.hcd not found [ 15.233438] kvm: disabled by bios [ 15.270495] kvm: disabled by bios [ 15.282354] [drm:drm_atomic_state_init] Allocated atomic state ffff880027591c00 [ 15.282358] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff8800b9966c00 state to ffff880027591c00 [ 15.282361] [drm:drm_atomic_get_plane_state] Added [PLANE:18:plane-0] ffff88008c8c7b80 state to ffff880027591c00 [ 15.282365] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff8800b9966c00 [ 15.282366] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88008c8c7b80 to [CRTC:21:crtc-0] [ 15.282368] [drm:drm_atomic_set_fb_for_plane] Set [FB:44] for plane state ffff88008c8c7b80 [ 15.282370] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:28] ffff88012addeca0 state to ffff880027591c00 [ 15.282372] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027591c00 [ 15.282373] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88012addeca0 to [NOCRTC] [ 15.282375] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88012addeca0 to [CRTC:21:crtc-0] [ 15.282377] [drm:drm_atomic_get_crtc_state] Added [CRTC:25:crtc-1] ffff8800b9198800 state to ffff880027591c00 [ 15.282379] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-3] ffff88008d362640 state to ffff880027591c00 [ 15.282380] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800b9198800 [ 15.282381] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88008d362640 to [NOCRTC] [ 15.282382] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff88008d362640 [ 15.282383] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880027591c00 [ 15.282384] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:25:crtc-1] to ffff880027591c00 [ 15.282386] [drm:drm_atomic_check_only] checking ffff880027591c00 [ 15.282389] [drm:update_connector_routing] Updating routing for [CONNECTOR:28:eDP-1] [ 15.282392] [drm:update_connector_routing] [CONNECTOR:28:eDP-1] keeps [ENCODER:27:TMDS-27], now on [CRTC:21:crtc-0] [ 15.282396] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0 [ 15.282397] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:18] with fb 44 [ 15.282399] [drm:intel_plane_atomic_calc_changes] [PLANE:18] visible 1 -> 1, off 0, on 0, ms 0 [ 15.282402] [drm:drm_atomic_commit] commiting ffff880027591c00 [ 15.282425] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff880027591c00 [ 15.282429] [drm:drm_atomic_state_free] Freeing atomic state ffff880027591c00 [ 15.590059] intel_rapl: Found RAPL domain package [ 15.590061] intel_rapl: Found RAPL domain core [ 15.590062] intel_rapl: Found RAPL domain uncore [ 15.590063] intel_rapl: Found RAPL domain dram [ 19.718840] [drm:i915_gem_open] [ 19.719029] [drm:drm_atomic_state_init] Allocated atomic state ffff880026dda000 [ 19.719038] [drm:drm_atomic_get_plane_state] Added [PLANE:18:plane-0] ffff88012126fa00 state to ffff880026dda000 [ 19.719044] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff88008d254800 state to ffff880026dda000 [ 19.719049] [drm:drm_atomic_get_plane_state] Added [PLANE:20:plane-1] ffff88008cb30f40 state to ffff880026dda000 [ 19.719052] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88008cb30f40 to [NOCRTC] [ 19.719055] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff88008cb30f40 [ 19.719059] [drm:drm_atomic_get_plane_state] Added [PLANE:22:plane-2] ffff88008c9b8d00 state to ffff880026dda000 [ 19.719061] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88008c9b8d00 to [NOCRTC] [ 19.719064] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff88008c9b8d00 [ 19.719068] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-3] ffff8800256a84c0 state to ffff880026dda000 [ 19.719072] [drm:drm_atomic_get_plane_state] Added [PLANE:24:plane-4] ffff88002568d7c0 state to ffff880026dda000 [ 19.719075] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88002568d7c0 to [NOCRTC] [ 19.719077] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff88002568d7c0 [ 19.719081] [drm:drm_atomic_get_plane_state] Added [PLANE:26:plane-5] ffff88012ab0fd00 state to ffff880026dda000 [ 19.719084] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88012ab0fd00 to [NOCRTC] [ 19.719086] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff88012ab0fd00 [ 19.719092] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff88008d254800 [ 19.719096] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88012126fa00 to [CRTC:21:crtc-0] [ 19.719099] [drm:drm_atomic_set_fb_for_plane] Set [FB:44] for plane state ffff88012126fa00 [ 19.719105] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:28] ffff88012ab7b420 state to ffff880026dda000 [ 19.719108] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880026dda000 [ 19.719112] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88012ab7b420 to [NOCRTC] [ 19.719116] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff88012ab7b420 to [CRTC:21:crtc-0] [ 19.719120] [drm:drm_atomic_get_crtc_state] Added [CRTC:25:crtc-1] ffff8800ba5f6c00 state to ffff880026dda000 [ 19.719124] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800ba5f6c00 [ 19.719126] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff8800256a84c0 to [NOCRTC] [ 19.719129] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff8800256a84c0 [ 19.719133] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880026dda000 [ 19.719136] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:25:crtc-1] to ffff880026dda000 [ 19.719140] [drm:drm_atomic_check_only] checking ffff880026dda000 [ 19.719145] [drm:update_connector_routing] Updating routing for [CONNECTOR:28:eDP-1] [ 19.719150] [drm:update_connector_routing] [CONNECTOR:28:eDP-1] keeps [ENCODER:27:TMDS-27], now on [CRTC:21:crtc-0] [ 19.719157] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0 [ 19.719161] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:18] with fb 44 [ 19.719165] [drm:intel_plane_atomic_calc_changes] [PLANE:18] visible 1 -> 1, off 0, on 0, ms 0 [ 19.719170] [drm:drm_atomic_commit] commiting ffff880026dda000 [ 19.719203] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff880026dda000 [ 19.719210] [drm:drm_atomic_state_free] Freeing atomic state ffff880026dda000 [ 19.978876] r8169 0000:01:00.0 eth0: link down [ 19.978885] r8169 0000:01:00.0 eth0: link down [ 20.073799] [drm:drm_atomic_state_init] Allocated atomic state ffff880026649c00 [ 20.073801] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff88002677b000 state to ffff880026649c00 [ 20.073803] [drm:drm_atomic_get_plane_state] Added [PLANE:18:plane-0] ffff88008d362d00 state to ffff880026649c00 [ 20.073804] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff88002677b000 [ 20.073805] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88008d362d00 to [CRTC:21:crtc-0] [ 20.073806] [drm:drm_atomic_set_fb_for_plane] Set [FB:44] for plane state ffff88008d362d00 [ 20.073807] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:28] ffff880026989de0 state to ffff880026649c00 [ 20.073808] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880026649c00 [ 20.073809] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff880026989de0 to [NOCRTC] [ 20.073809] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff880026989de0 to [CRTC:21:crtc-0] [ 20.073810] [drm:drm_atomic_get_crtc_state] Added [CRTC:25:crtc-1] ffff88008d3c0400 state to ffff880026649c00 [ 20.073811] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-3] ffff880026a28580 state to ffff880026649c00 [ 20.073812] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff88008d3c0400 [ 20.073812] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880026a28580 to [NOCRTC] [ 20.073812] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880026a28580 [ 20.073813] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880026649c00 [ 20.073813] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:25:crtc-1] to ffff880026649c00 [ 20.073814] [drm:drm_atomic_check_only] checking ffff880026649c00 [ 20.073816] [drm:update_connector_routing] Updating routing for [CONNECTOR:28:eDP-1] [ 20.073817] [drm:update_connector_routing] [CONNECTOR:28:eDP-1] keeps [ENCODER:27:TMDS-27], now on [CRTC:21:crtc-0] [ 20.073819] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0 [ 20.073819] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:18] with fb 44 [ 20.073820] [drm:intel_plane_atomic_calc_changes] [PLANE:18] visible 1 -> 1, off 0, on 0, ms 0 [ 20.073821] [drm:drm_atomic_commit] commiting ffff880026649c00 [ 20.073835] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff880026649c00 [ 20.073837] [drm:drm_atomic_state_free] Freeing atomic state ffff880026649c00 [ 20.075968] [drm:i915_gem_open] [ 20.076008] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[5] [ 20.100988] [drm:i915_gem_open] [ 20.101052] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[5] [ 20.101054] [drm:drm_mode_getresources] [CRTC:21:crtc-0] [ 20.101055] [drm:drm_mode_getresources] [CRTC:25:crtc-1] [ 20.101056] [drm:drm_mode_getresources] [ENCODER:27:TMDS-27] [ 20.101057] [drm:drm_mode_getresources] [ENCODER:33:TMDS-33] [ 20.101058] [drm:drm_mode_getresources] [ENCODER:35:DP MST-35] [ 20.101058] [drm:drm_mode_getresources] [ENCODER:36:DP MST-36] [ 20.101059] [drm:drm_mode_getresources] [ENCODER:37:DP MST-37] [ 20.101060] [drm:drm_mode_getresources] [CONNECTOR:28:eDP-1] [ 20.101061] [drm:drm_mode_getresources] [CONNECTOR:34:DP-1] [ 20.101062] [drm:drm_mode_getresources] [CONNECTOR:38:HDMI-A-1] [ 20.101063] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[5] [ 20.116234] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[5] [ 20.116243] [drm:drm_mode_addfb2] [FB:43] [ 20.116632] [drm:internal_framebuffer_create] could not create framebuffer [ 20.116638] [drm:drm_mode_addfb2] [FB:43] [ 20.116642] [drm:drm_mode_addfb2] [FB:43] [ 20.116669] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[5] [ 20.116670] [drm:drm_mode_getresources] [CRTC:21:crtc-0] [ 20.116671] [drm:drm_mode_getresources] [CRTC:25:crtc-1] [ 20.116672] [drm:drm_mode_getresources] [ENCODER:27:TMDS-27] [ 20.116673] [drm:drm_mode_getresources] [ENCODER:33:TMDS-33] [ 20.116674] [drm:drm_mode_getresources] [ENCODER:35:DP MST-35] [ 20.116675] [drm:drm_mode_getresources] [ENCODER:36:DP MST-36] [ 20.116675] [drm:drm_mode_getresources] [ENCODER:37:DP MST-37] [ 20.116676] [drm:drm_mode_getresources] [CONNECTOR:28:eDP-1] [ 20.116677] [drm:drm_mode_getresources] [CONNECTOR:34:DP-1] [ 20.116678] [drm:drm_mode_getresources] [CONNECTOR:38:HDMI-A-1] [ 20.116679] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[5] [ 20.116718] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 20.116748] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 20.195746] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 20.195755] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 20.195783] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 20.195786] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 20.806956] [drm:drm_mode_addfb2] [FB:43] [ 21.178413] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0] [ 21.178427] [drm:drm_mode_setcrtc] [CONNECTOR:28:eDP-1] [ 21.178434] [drm:drm_atomic_state_init] Allocated atomic state ffff880026461000 [ 21.178441] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff8800277cbc00 state to ffff880026461000 [ 21.178446] [drm:drm_atomic_get_plane_state] Added [PLANE:18:plane-0] ffff880027570f40 state to ffff880026461000 [ 21.178452] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1600x900] for CRTC state ffff8800277cbc00 [ 21.178455] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880027570f40 to [CRTC:21:crtc-0] [ 21.178459] [drm:drm_atomic_set_fb_for_plane] Set [FB:43] for plane state ffff880027570f40 [ 21.178464] [drm:drm_atomic_get_connector_state] Added [CONNECTOR:28] ffff8800269895e0 state to ffff880026461000 [ 21.178467] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:21:crtc-0] to ffff880026461000 [ 21.178471] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff8800269895e0 to [NOCRTC] [ 21.178474] [drm:drm_atomic_set_crtc_for_connector] Link connector state ffff8800269895e0 to [CRTC:21:crtc-0] [ 21.178478] [drm:drm_atomic_check_only] checking ffff880026461000 [ 21.178483] [drm:update_connector_routing] Updating routing for [CONNECTOR:28:eDP-1] [ 21.178488] [drm:update_connector_routing] [CONNECTOR:28:eDP-1] keeps [ENCODER:27:TMDS-27], now on [CRTC:21:crtc-0] [ 21.178495] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:18] scaler_user index 0.0 [ 21.178499] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:18] with fb 43 [ 21.178503] [drm:intel_plane_atomic_calc_changes] [PLANE:18] visible 1 -> 1, off 0, on 0, ms 0 [ 21.178509] [drm:drm_atomic_commit] commiting ffff880026461000 [ 21.187097] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff880026461000 [ 21.187110] [drm:drm_atomic_state_free] Freeing atomic state ffff880026461000 [ 22.196288] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 22.196298] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] [ 22.196302] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 22.196309] [drm:intel_power_well_enable] enabling DC off [ 22.196315] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 22.196332] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 22.196380] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 22.197277] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 22.198158] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 22.199464] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] probed modes : [ 22.199470] [drm:drm_mode_debug_printmodeline] Modeline 42:"1600x900" 60 118360 1600 1624 1704 2112 900 901 904 934 0x8 0xa [ 22.199480] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 22.199807] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 22.199811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] [ 22.199813] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 22.199817] [drm:intel_power_well_enable] enabling power well 2 [ 22.199821] [drm:skl_set_power_well] Enabling power well 2 [ 22.199839] [drm:intel_power_well_disable] disabling power well 2 [ 22.199848] [drm:skl_set_power_well] Disabling power well 2 [ 22.199852] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] disconnected [ 22.199863] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 22.199867] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] [ 22.199872] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-1] [ 22.331926] [drm:intel_hdmi_detect] Live status not up! [ 22.331936] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] disconnected [ 23.917204] [drm:drm_atomic_state_init] Allocated atomic state ffff8800b1e55e00 [ 23.917215] [drm:drm_atomic_get_plane_state] Added [PLANE:20:plane-1] ffff880027570ac0 state to ffff8800b1e55e00 [ 23.917221] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff88011fc8bc00 state to ffff8800b1e55e00 [ 23.917225] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880027570ac0 to [CRTC:21:crtc-0] [ 23.917228] [drm:drm_atomic_set_fb_for_plane] Set [FB:41] for plane state ffff880027570ac0 [ 23.917231] [drm:drm_atomic_check_only] checking ffff8800b1e55e00 [ 23.917240] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:20] with fb 41 [ 23.917244] [drm:intel_plane_atomic_calc_changes] [PLANE:20] visible 0 -> 1, off 0, on 1, ms 0 [ 23.917251] [drm:drm_atomic_commit] commiting ffff8800b1e55e00 [ 23.917298] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 23.917326] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff8800b1e55e00 [ 23.917330] [drm:drm_atomic_state_free] Freeing atomic state ffff8800b1e55e00 [ 24.438163] [drm:intel_power_well_enable] enabling power well 2 [ 24.438173] [drm:skl_set_power_well] Enabling power well 2 [ 24.443884] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 24.452541] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 24.454593] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 24.460152] [drm:i915_audio_component_sync_audio_rate] no valid port B [ 24.461901] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 24.472160] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 24.485761] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 24.492114] [drm:i915_audio_component_sync_audio_rate] no valid port C [ 24.494178] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 24.500153] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 24.537572] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 24.548140] [drm:i915_audio_component_sync_audio_rate] no valid port D [ 25.200011] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 25.200052] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 26.470736] r8169 0000:01:00.0 eth0: link up [ 26.593668] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 27.784421] [drm:intel_power_well_disable] disabling power well 2 [ 27.784436] [drm:skl_set_power_well] Disabling power well 2 [ 27.784439] [drm:intel_power_well_disable] disabling DC off [ 27.784445] [drm:skl_enable_dc6] Enabling DC6 [ 27.784449] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 33.399902] tun: Universal TUN/TAP device driver, 1.6 [ 33.399908] tun: (C) 1999-2004 Max Krasnyansky [ 34.339129] [drm:i915_gem_open] [ 35.115516] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 35.135822] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed [ 39.563799] [drm:drm_atomic_state_init] Allocated atomic state ffff8800b1d63e00 [ 39.563810] [drm:drm_atomic_get_plane_state] Added [PLANE:20:plane-1] ffff88012aa40f40 state to ffff8800b1d63e00 [ 39.563816] [drm:drm_atomic_get_crtc_state] Added [CRTC:21:crtc-0] ffff8800b1e56000 state to ffff8800b1d63e00 [ 39.563820] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff88012aa40f40 to [CRTC:21:crtc-0] [ 39.563824] [drm:drm_atomic_set_fb_for_plane] Set [FB:41] for plane state ffff88012aa40f40 [ 39.563827] [drm:drm_atomic_check_only] checking ffff8800b1d63e00 [ 39.563835] [drm:intel_plane_atomic_calc_changes] [CRTC:21] has [PLANE:20] with fb 41 [ 39.563838] [drm:intel_plane_atomic_calc_changes] [PLANE:20] visible 1 -> 1, off 0, on 0, ms 0 [ 39.563845] [drm:drm_atomic_commit] commiting ffff8800b1d63e00 [ 39.563873] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff8800b1d63e00 [ 39.563878] [drm:drm_atomic_state_free] Freeing atomic state ffff8800b1d63e00 [ 39.961167] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 43.552355] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 43.552364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] [ 43.552368] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1] [ 43.552375] [drm:intel_power_well_enable] enabling DC off [ 43.552380] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 43.552396] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 43.552445] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f [ 43.553359] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 43.554244] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 43.555549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:eDP-1] probed modes : [ 43.555555] [drm:drm_mode_debug_printmodeline] Modeline 42:"1600x900" 60 118360 1600 1624 1704 2112 900 901 904 934 0x8 0xa [ 43.555571] [drm:drm_mode_getconnector] [CONNECTOR:28:?] [ 43.555862] [drm:drm_mode_getconnector] [CONNECTOR:34:?] [ 43.555866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] [ 43.555869] [drm:intel_dp_detect] [CONNECTOR:34:DP-1] [ 43.555873] [drm:intel_power_well_enable] enabling power well 2 [ 43.555877] [drm:skl_set_power_well] Enabling power well 2 [ 43.555895] [drm:intel_power_well_disable] disabling power well 2 [ 43.555904] [drm:skl_set_power_well] Disabling power well 2 [ 43.555908] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:34:DP-1] disconnected [ 43.555919] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 43.555923] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] [ 43.555928] [drm:intel_hdmi_detect] [CONNECTOR:38:HDMI-A-1] [ 43.680403] [drm:intel_hdmi_detect] Live status not up! [ 43.680413] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:HDMI-A-1] disconnected [ 44.516229] [drm:drm_mode_addfb2] [FB:45]