X.Org X Server 1.17.1 Release Date: 2015-02-10 X Protocol Version 11, Revision 0 Build Operating System: ThinStation Thinstation Current Operating System: Linux LNX-a2e8 4.1.1TS_SMP #1 SMP PREEMPT Sun Jul 5 21:14:08 UTC 2015 i686 Kernel command line: usbhid.quirks=0x1bfd:0x3050:0x40 BOOT_IMAGE=vmlinuz initrd=initrd splash=silent,theme:default load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=786432 console=tty1 vt.global_cursor_default=0 loglevel=3 LM=3 Build Date: 31 March 2015 01:22:27AM Donald A. Cupp Jr. Current version of pixman: 0.32.6 Before reporting problems, check http://www.thinstation.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 14 16:16:14 2016 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (**) Option "IgnoreABI" "true" (**) Option "AutoAddDevices" "true" (**) Option "AutoEnableDevices" "true" (**) Ignoring ABI Version (**) Automatically adding devices (**) Automatically enabling devices (==) Automatically adding GPU devices (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc/, /usr/share/fonts/X11/TTF/ (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x82635e0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 19.0 X.Org XInput driver : 21.0 X.Org Server Extension : 9.0 (--) PCI:*(0:0:1:0) 1106:7122:1106:7122 rev 0, Mem @ 0xfd000000/16777216, 0xfc000000/16777216, 0xf0000000/134217728, BIOS @ 0x????????/65536 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.17.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 9.0 (==) AIGLX enabled (==) Matched openchrome as autoconfigured driver 0 (==) Matched modesetting as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Matched vesa as autoconfigured driver 3 (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "openchrome" (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so (II) Module openchrome: vendor="http://www.freedesktop.org/wiki/Openchrome/" compiled for 1.17.1, module version = 0.3.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 19.0 (II) LoadModule: "modesetting" (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so (II) Module modesetting: vendor="X.Org Foundation" compiled for 1.17.1, module version = 1.17.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 19.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.17.1, module version = 0.4.4 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 19.0 (II) LoadModule: "vesa" (WW) Warning, couldn't open module vesa (II) UnloadModule: "vesa" (II) Unloading vesa (EE) Failed to load module "vesa" (module does not exist, 0) (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800, PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700, CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890, P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900 (II) modesetting: Driver for Modesetting Kernel Drivers: kms (II) FBDEV: driver for framebuffer: fbdev (++) using VT number 5 (!!) VIA Technologies does not support this driver in any way. (!!) For support, please refer to http://www.freedesktop.org/wiki/Openchrome/. (!!) (development build, branch master at revision b8eb2ab) (WW) Falling back to old probe method for modesetting (EE) open /dev/dri/card0: No such file or directory (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.17.1, module version = 0.0.2 ABI class: X.Org Video Driver, version 19.0 (II) CHROME(0): VIAPreInit (II) CHROME(0): VIAGetRec (--) CHROME(0): Chipset: VX900 (--) CHROME(0): Chipset revision: 0 (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:00:01.0: No such file or directory (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.17.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 19.0 (--) CHROME(0): Probed amount of VideoRAM = 131072 kB (II) CHROME(0): VIAMapMMIO (--) CHROME(0): mapping MMIO @ 0xfc000000 with size 0xd000 (--) CHROME(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000 (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 (II) CHROME(0): VIAMapFB (--) CHROME(0): mapping framebuffer @ 0xf0000000 with size 0x8000000 (--) CHROME(0): Frame buffer start: 0x6edc1000, free start: 0x0 end: 0x8000000 (II) CHROME(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) CHROME(0): Depth 24, (--) framebuffer bpp 32 (==) CHROME(0): RGB weight 888 (==) CHROME(0): Default visual is TrueColor (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options. (==) CHROME(0): Shadow framebuffer is disabled. (==) CHROME(0): Hardware acceleration is enabled. (==) CHROME(0): Using EXA acceleration architecture. (==) CHROME(0): EXA composite acceleration enabled. (==) CHROME(0): EXA scratch area size is 4096 kB. (==) CHROME(0): Using hardware two-color cursors and software full-color cursors. (==) CHROME(0): GPU virtual command queue will be enabled. (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled. (==) CHROME(0): AGP DMA will be disabled if DRI is enabled. (==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled. (==) CHROME(0): Will not enable VBE modes. (==) CHROME(0): VBE VGA register save & restore will not be used if VBE modes are enabled. (==) CHROME(0): Xv Bandwidth check is enabled. (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI. (==) CHROME(0): Will try to allocate 32768 kB of AGP memory. (==) CHROME(0): TV dotCrawl is disabled. (==) CHROME(0): TV deflicker is set to 0. (==) CHROME(0): No default TV type is set. (==) CHROME(0): No default TV output signal type is set. (==) CHROME(0): No default TV output port is set. (==) CHROME(0): Will not print VGA registers. (==) CHROME(0): Will not scan I2C buses. (II) CHROME(0): ...Finished parsing config file options. (WW) CHROME(0): Manufacturer plainly copied main PCI IDs to subsystem/card IDs. (--) CHROME(0): Detected HP T5550 Thin Client. Card-Ids (1106|7122) (II) CHROME(0): Detected MemClk 9 (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 9 (II) CHROME(0): Detected TV standard: NTSC. (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) CHROME(0): Entered ViaI2CInit. (II) CHROME(0): Entered ViaI2CBus1Init. (II) CHROME(0): I2C bus "I2C Bus 1" initialized. (II) CHROME(0): Exiting ViaI2CBus1Init. (II) CHROME(0): Entered ViaI2CBus2Init. (II) CHROME(0): I2C bus "I2C Bus 2" initialized. (II) CHROME(0): Exiting ViaI2CBus2Init. (II) CHROME(0): Entered ViaI2CBus3Init. (II) CHROME(0): I2C bus "I2C Bus 3" initialized. (II) CHROME(0): Exiting ViaI2CBus3Init. (II) CHROME(0): Exiting ViaI2CInit. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) CHROME(0): Entered ViaOutputsDetect. (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits. (==) CHROME(0): LVDS-0 : DVI Center is disabled. (==) CHROME(0): LVDS Panel will not be forced. (==) CHROME(0): Panel size is not selected from config file. (II) CHROME(0): Entered via_analog_init. (II) CHROME(0): Output VGA-1 has no monitor section (II) CHROME(0): Exiting via_analog_init. (II) CHROME(0): Entered via_tv_init. (II) CHROME(0): ViaVT162xDetect (II) CHROME(0): I2C device "I2C Bus 3:VT162x" registered at address 0x40. (WW) CHROME(0): Unknown TV Encoder found at I2C Bus 3 40. (II) CHROME(0): I2C device "I2C Bus 3:VT162x" removed. (--) CHROME(0): Did not detect a TV encoder. (II) CHROME(0): Exiting via_tv_init. (II) CHROME(0): Entered via_dvi_init. (--) CHROME(0): Will probe I2C Bus 3 for a possible external TMDS transmitter. (II) CHROME(0): I2C device "I2C Bus 3:VT1632A" registered at address 0x10. (II) CHROME(0): Entered via_vt1632_probe. (II) CHROME(0): Vendor ID: 0x0000 (II) CHROME(0): Device ID: 0000 (--) CHROME(0): VT1632A DVI transmitter not detected. (II) CHROME(0): Exiting via_vt1632_probe. (II) CHROME(0): I2C device "I2C Bus 3:VT1632A" removed. (II) CHROME(0): Exiting via_dvi_init. (II) CHROME(0): Exiting ViaOutputsDetect. (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1. (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at address 0xA0. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1. (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2. (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at address 0xA0. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2. (--) CHROME(0): Now perform manual detection of a VGA monitor. (II) CHROME(0): EDID for output VGA-1 (II) CHROME(0): Output VGA-1 disconnected (WW) CHROME(0): No outputs definitely connected, trying again... (II) CHROME(0): Output VGA-1 disconnected (WW) CHROME(0): Unable to find connected outputs - setting 1024x768 initial framebuffer (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) CHROME(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.17.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules/libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.17.1, module version = 2.6.0 ABI class: X.Org Video Driver, version 19.0 (II) UnloadModule: "modesetting" (II) Unloading modesetting (II) UnloadModule: "fbdev" (II) Unloading fbdev (II) UnloadSubModule: "fbdevhw" (II) Unloading fbdevhw (--) Depth 24 pixmap format is 32 bpp (II) CHROME(0): VIAScreenInit (II) CHROME(0): Frame Buffer From (0,0) To (1024,32767) (II) CHROME(0): Using 31999 lines for offscreen memory. 3145728 bytes of Linear memory allocated at 300000, handle 147628800 262144 bytes of Linear memory allocated at 600000, handle 147628904 32 bytes of Linear memory allocated at 640000, handle 147629032 32 bytes of Linear memory allocated at 640080, handle 147632752 (II) CHROME(0): - Visuals set up (II) CHROME(0): - B & W (**) CHROME(0): Option "MigrationHeuristic" "greedy" (II) EXA(0): Offscreen pixmap area of 131072000 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (II) CHROME(0): [EXA] Enabled EXA acceleration. (==) CHROME(0): Backing store enabled (II) CHROME(0): - Backing store set up (II) CHROME(0): - SW cursor set up (II) CHROME(0): HWCursor ARGB enabled 16384 bytes of Linear memory allocated at 641000, handle 147667784 16384 bytes of Linear memory allocated at 645000, handle 147632840 (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) CHROME(0): - Def Color map set up (II) CHROME(0): - Palette loaded (II) CHROME(0): - Color maps etc. set up (==) CHROME(0): DPMS enabled (II) CHROME(0): - DPMS set up (II) CHROME(0): VIAEnterVT (II) CHROME(0): VIASave (II) CHROME(0): Primary (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !! (II) CHROME(0): Crtc... (II) CHROME(0): TVSave... (II) CHROME(0): VIASave (II) CHROME(0): Primary (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !! (II) CHROME(0): Crtc... (II) CHROME(0): TVSave... (II) CHROME(0): ViaDisplayDisableCRT (II) CHROME(0): ViaDisplayDisableCRT DRM memory allocation failed -6 via_xv.c : viaInitVideo, Screen[0] 635904 bytes of Linear memory allocated at 649000, handle 147684968 (II) CHROME(0): Benchmarking video copy. Less time is better. (--) CHROME(0): Timed libc YUV420 copy... 654135. Throughput: 906.9 MiB/s. (--) CHROME(0): Timed kernel YUV420 copy... 650845. Throughput: 911.5 MiB/s. (--) CHROME(0): Timed SSE YUV420 copy... 641230. Throughput: 925.2 MiB/s. (--) CHROME(0): Timed MMX YUV420 copy... 641000. Throughput: 925.5 MiB/s. (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU. (--) CHROME(0): Timed MMX2 YUV420 copy... 641280. Throughput: 925.1 MiB/s. Freed 6590464 (pool 4) (--) CHROME(0): Using MMX YUV42X copy for video. via_xv.c : viaSetupAdaptors (viaSetupImageVideo): via_xv.c : viaGetPortAttribute : port 0 74 via_xv.c : ColorKey 0x821 via_xv.c : viaGetPortAttribute : port 0 77 AutoPaint = 00000001 via_xv.c : viaGetPortAttribute : port 0 72 xvBrightness = 00005000 via_xv.c : viaGetPortAttribute : port 0 73 xvContrast = 00010000 via_xv.c : viaGetPortAttribute : port 0 76 xvSaturation = 00010000 via_xv.c : viaGetPortAttribute : port 0 75 xvHue = 00000000 via_xv.c : viaResetVideo: via_xv.c : num_adaptors : 0 (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset. 00000288 13171000 00000284 13000ded (II) CHROME(0): - Done (--) RandR disabled (II) AIGLX: Screen 0 is not DRI2 capable (EE) AIGLX: reverting to software rendering (II) AIGLX: Loaded and initialized swrast (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/udev: Adding input device Power Button (/dev/input/event2) (**) Power Button: Applying InputClass "Keyboard Defaults" (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.17.1, module version = 2.9.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 21.0 (II) Using input driver 'evdev' for 'Power Button' (**) Power Button: always reports core events (**) evdev: Power Button: Device: "/dev/input/event2" (--) evdev: Power Button: Vendor 0 Product 0x1 (--) evdev: Power Button: Found keys (II) evdev: Power Button: Configuring as keyboard (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "Keyboard Defaults" (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Power Button' (**) Power Button: always reports core events (**) evdev: Power Button: Device: "/dev/input/event1" (--) evdev: Power Button: Vendor 0 Product 0x1 (--) evdev: Power Button: Found keys (II) evdev: Power Button: Configuring as keyboard (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Sleep Button (/dev/input/event0) (**) Sleep Button: Applying InputClass "Keyboard Defaults" (**) Sleep Button: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'Sleep Button' (**) Sleep Button: always reports core events (**) evdev: Sleep Button: Device: "/dev/input/event0" (--) evdev: Sleep Button: Vendor 0 Product 0x3 (--) evdev: Sleep Button: Found keys (II) evdev: Sleep Button: Configuring as keyboard (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device LITE-ON Technology USB NetVista Full Width Keyboard. (/dev/input/event3) (**) LITE-ON Technology USB NetVista Full Width Keyboard.: Applying InputClass "Keyboard Defaults" (**) LITE-ON Technology USB NetVista Full Width Keyboard.: Applying InputClass "evdev keyboard catchall" (II) Using input driver 'evdev' for 'LITE-ON Technology USB NetVista Full Width Keyboard.' (**) LITE-ON Technology USB NetVista Full Width Keyboard.: always reports core events (**) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Device: "/dev/input/event3" (--) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Vendor 0x4b3 Product 0x3025 (--) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Found keys (II) evdev: LITE-ON Technology USB NetVista Full Width Keyboard.: Configuring as keyboard (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/0003:04B3:3025.0001/input/input5/event3" (II) XINPUT: Adding extended input device "LITE-ON Technology USB NetVista Full Width Keyboard." (type: KEYBOARD, id 9) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc104" (**) Option "xkb_layout" "us" (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1. (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2. (--) CHROME(0): Now perform manual detection of a VGA monitor. (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1. (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2. (--) CHROME(0): Now perform manual detection of a VGA monitor. (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1. (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2. (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2. (--) CHROME(0): Now perform manual detection of a VGA monitor. (II) CHROME(0): VIALeaveVT via_xv.c : viaSaveVideo : (II) CHROME(0): VIARestore (II) CHROME(0): ViaDisplayInit (II) CHROME(0): ViaSecondDisplayChannelDisable (II) CHROME(0): ViaDisablePrimaryFIFO (II) CHROME(0): VIARestore (II) CHROME(0): ViaDisplayInit (II) CHROME(0): ViaSecondDisplayChannelDisable (II) CHROME(0): ViaDisablePrimaryFIFO