[    0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Linux version 4.5.0+ (root@piranha) (gcc version 5.3.1 20160323 (Debian 5.3.1-13) ) #1 SMP Wed Mar 30 22:25:23 CEST 2016
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.5.0+ root=/dev/mapper/linux-root ro quiet transparant_hugepage=always
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b8cf2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8cf3000-0x00000000b94f9fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000b94fa000-0x00000000b9ebbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9ebc000-0x00000000b9fbbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b9fbc000-0x00000000b9ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffee0000-0x00000000ffefefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023edfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.10 by HPQ
[    0.000000] efi:  ACPI=0xb9ffe000  ACPI 2.0=0xb9ffe014  SMBIOS=0xb956b698 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.31 09/24/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23ee00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23F000000 mask FFF000000 uncachable
[    0.000000]   8 base 23EE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x02131000, 0x02131fff] PGTABLE
[    0.000000] BRK [0x02132000, 0x02132fff] PGTABLE
[    0.000000] BRK [0x02133000, 0x02133fff] PGTABLE
[    0.000000] BRK [0x02134000, 0x02134fff] PGTABLE
[    0.000000] BRK [0x02135000, 0x02135fff] PGTABLE
[    0.000000] BRK [0x02136000, 0x02136fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c68000-0x36e2bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000B9FFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000B9FFE120 000094 (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.000000] ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 179B     0000000F HP   00000001)
[    0.000000] ACPI: DSDT 0x00000000B9FD3000 023043 (v02 HPQOEM 179B     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 0x00000000B9E71000 000040
[    0.000000] ACPI: FACS 0x00000000B9E71000 000040
[    0.000000] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 0x00000000B9FF7000 000032 (v02 HPQOEM 179B     00000000 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000B9FD0000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x00000000B9FCF000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.000000] ACPI: SLIC 0x00000000B9FCE000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: FPDT 0x00000000B9FCC000 000044 (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 0x00000000B9FCB000 000038 (v00 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000B9FCA000 0009B6 (v01 PmRef  Cpu0Ist  00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x00000000B9FC9000 000AAD (v01 PmRef  CpuPm    00003000 INTL 20110112)
[    0.000000] ACPI: DMAR 0x00000000B9FC8000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023edfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23edf6000-0x23edf9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023edfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b8cf2fff]
[    0.000000]   node   0: [mem 0x00000000b9fff000-0x00000000b9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023edfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023edfffff]
[    0.000000] On node 0 totalpages: 2062992
[    0.000000]   DMA32 zone: 11827 pages used for memmap
[    0.000000]   DMA32 zone: 23 pages reserved
[    0.000000]   DMA32 zone: 756880 pages, LIFO batch:31
[    0.000000]   Normal zone: 20408 pages used for memmap
[    0.000000]   Normal zone: 1306112 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbb200000-0xbf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8cf3000-0xb94f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb94fa000-0xb9ebbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9ebc000-0xb9fbbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9fbc000-0xb9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbb1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb200000-0xbf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffedffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffee0000-0xffefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xffeff000-0xffffffff]
[    0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88023ea00000 s93144 r8192 d29736 u262144
[    0.000000] pcpu-alloc: s93144 r8192 d29736 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2030734
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.5.0+ root=/dev/mapper/linux-root ro quiet transparant_hugepage=always
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7888032K/8251968K available (5824K kernel code, 1093K rwdata, 2872K rodata, 1312K init, 824K bss, 363936K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2594.042 MHz processor
[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.08 BogoMIPS (lpj=10376168)
[    0.000033] pid_max: default: 32768 minimum: 301
[    0.000043] ACPI: Core revision 20160108
[    0.010372] ACPI: 5 ACPI AML tables successfully acquired and loaded

[    0.028065] Security Framework initialized
[    0.028069] Yama: becoming mindful.
[    0.028074] AppArmor: AppArmor disabled by boot time parameter
[    0.028534] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.030433] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.031274] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031283] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.031517] CPU: Physical Processor ID: 0
[    0.031518] CPU: Processor Core ID: 0
[    0.031523] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.031523] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.031526] mce: CPU supports 7 MCE banks
[    0.031536] CPU0: Thermal monitoring enabled (TM1)
[    0.031541] process: using mwait in idle threads
[    0.031544] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.031545] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.031907] Freeing SMP alternatives memory: 24K (ffffffff81c5b000 - ffffffff81c61000)
[    0.091095] ftrace: allocating 23947 entries in 94 pages
[    0.100760] DMAR: Host address width 36
[    0.100762] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.100767] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.100768] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.100771] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.100773] DMAR: RMRR base: 0x000000b9e4c000 end: 0x000000b9e6bfff
[    0.100774] DMAR: RMRR base: 0x000000bb000000 end: 0x000000bf1fffff
[    0.100776] DMAR-IR: IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
[    0.100777] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.100778] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.101063] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.101065] x2apic enabled
[    0.101071] Switched APIC routing to cluster x2apic.
[    0.101525] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.141214] TSC deadline timer enabled
[    0.141218] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.141248] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.141267] ... version:                3
[    0.141268] ... bit width:              48
[    0.141268] ... generic registers:      4
[    0.141269] ... value mask:             0000ffffffffffff
[    0.141270] ... max period:             0000ffffffffffff
[    0.141271] ... fixed-purpose events:   3
[    0.141271] ... event mask:             000000070000000f
[    0.141741] x86: Booting SMP configuration:
[    0.141743] .... node  #0, CPUs:      #1
[    0.144144] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.144231]  #2
[    0.144790] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.146947]  #3
[    0.149238] x86: Booted up 1 node, 4 CPUs
[    0.149241] smpboot: Total of 4 processors activated (20752.33 BogoMIPS)
[    0.152234] devtmpfs: initialized
[    0.154804] PM: Registering ACPI NVS region [mem 0xb9ebc000-0xb9fbbfff] (1048576 bytes)
[    0.154896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.154950] pinctrl core: initialized pinctrl subsystem
[    0.155081] NET: Registered protocol family 16
[    0.164080] cpuidle: using governor ladder
[    0.176074] cpuidle: using governor menu
[    0.176173] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.176175] ACPI: bus type PCI registered
[    0.176176] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.176263] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.176265] PCI: not using MMCONFIG
[    0.176266] PCI: Using configuration type 1 for base access
[    0.176497] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.184215] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.184465] ACPI: Added _OSI(Module Device)
[    0.184466] ACPI: Added _OSI(Processor Device)
[    0.184467] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.184468] ACPI: Added _OSI(Processor Aggregator Device)
[    0.186367] ACPI: Executed 1 blocks of module-level executable AML code
[    0.192101] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.201774] ACPI: Dynamic OEM Table Load:
[    0.201782] ACPI: SSDT 0xFFFF8802348F6000 000861 (v01 PmRef  Cpu0Cst  00003001 INTL 20110112)
[    0.202298] ACPI: Dynamic OEM Table Load:
[    0.202303] ACPI: SSDT 0xFFFF880234828000 000303 (v01 PmRef  ApIst    00003000 INTL 20110112)
[    0.202751] ACPI: Dynamic OEM Table Load:
[    0.202755] ACPI: SSDT 0xFFFF8802348B7200 000119 (v01 PmRef  ApCst    00003000 INTL 20110112)
[    0.203679] ACPI : EC: EC started
[    0.645508] ACPI: Interpreter enabled
[    0.645527] ACPI: (supports S0 S3 S4 S5)
[    0.645528] ACPI: Using IOAPIC for interrupt routing
[    0.645548] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.645844] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.645857] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.647543] ACPI: Power Resource [APPR] (off)
[    0.649540] ACPI: Power Resource [COMP] (on)
[    0.649854] ACPI: Power Resource [LPP] (on)
[    0.653110] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.653115] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.654600] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.654602] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.655012] PCI host bridge to bus 0000:00
[    0.655014] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.655016] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.655017] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.655019] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[    0.655020] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
[    0.655022] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    0.655023] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.655030] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.655117] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.655126] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
[    0.655132] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.655137] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.655251] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.655269] pci 0000:00:14.0: reg 0x10: [mem 0xd4720000-0xd472ffff 64bit]
[    0.655335] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.655371] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.655413] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.655434] pci 0000:00:16.0: reg 0x10: [mem 0xd4734000-0xd473400f 64bit]
[    0.655514] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.655589] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.655605] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff]
[    0.655614] pci 0000:00:19.0: reg 0x14: [mem 0xd473a000-0xd473afff]
[    0.655622] pci 0000:00:19.0: reg 0x18: [io  0x4060-0x407f]
[    0.655686] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.655721] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.655759] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.655776] pci 0000:00:1a.0: reg 0x10: [mem 0xd4739000-0xd47393ff]
[    0.655863] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.655901] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.655938] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.655953] pci 0000:00:1b.0: reg 0x10: [mem 0xd4730000-0xd4733fff 64bit]
[    0.656019] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.656094] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.656172] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.656247] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.656325] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.656369] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.656408] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.656491] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.656530] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.656567] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.656650] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.656689] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.656730] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.656747] pci 0000:00:1d.0: reg 0x10: [mem 0xd4738000-0xd47383ff]
[    0.656836] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.656872] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.656910] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.657079] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.657094] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.657101] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.657109] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.657117] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.657125] pci 0000:00:1f.2: reg 0x20: [io  0x4040-0x405f]
[    0.657133] pci 0000:00:1f.2: reg 0x24: [mem 0xd4737000-0xd47377ff]
[    0.657178] pci 0000:00:1f.2: PME# supported from D3hot
[    0.657287] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.657294] pci 0000:00:1c.0:   bridge window [mem 0xd4600000-0xd46fffff]
[    0.657394] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
[    0.657398] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
[    0.657402] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
[    0.657512] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
[    0.657549] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff]
[    0.657573] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff]
[    0.657880] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
[    0.657907] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff]
[    0.657988] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
[    0.658173] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
[    0.658205] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff]
[    0.664390] pci 0000:00:1c.2: PCI bridge to [bus 23]
[    0.664410] pci 0000:00:1c.2:   bridge window [mem 0xd4500000-0xd45fffff]
[    0.664633] pci 0000:24:00.0: [8086:422b] type 00 class 0x028000
[    0.664783] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit]
[    0.665499] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[    0.665689] pci 0000:24:00.0: System wakeup disabled by ACPI
[    0.672462] pci 0000:00:1c.3: PCI bridge to [bus 24]
[    0.672468] pci 0000:00:1c.3:   bridge window [mem 0xd4400000-0xd44fffff]
[    0.673384] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673473] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673516] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673559] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673602] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673645] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673687] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.673982] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.674018] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.674109] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.674111] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.674113] vgaarb: loaded
[    0.674114] vgaarb: bridge control possible 0000:00:02.0
[    0.674225] PCI: Using ACPI for IRQ routing
[    0.680556] PCI: pci_cache_line_size set to 64 bytes
[    0.680661] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.680662] e820: reserve RAM buffer [mem 0xb8cf3000-0xbbffffff]
[    0.680664] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    0.680665] e820: reserve RAM buffer [mem 0x23ee00000-0x23fffffff]
[    0.680801] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.680805] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.682828] clocksource: Switched to clocksource hpet
[    0.687971] VFS: Disk quotas dquot_6.6.0
[    0.687996] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.688121] pnp: PnP ACPI init
[    0.688289] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.688291] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.688293] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.688295] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.688297] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.688298] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.688300] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.688301] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.688303] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.688306] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.688431] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.688493] system 00:02: [io  0x0200-0x027f] has been reserved
[    0.688495] system 00:02: [io  0x1000-0x100f] has been reserved
[    0.688497] system 00:02: [io  0xffff] has been reserved
[    0.688498] system 00:02: [io  0xffff] has been reserved
[    0.688500] system 00:02: [io  0x0400-0x047f] could not be reserved
[    0.688501] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.688503] system 00:02: [io  0xef80-0xef9f] has been reserved
[    0.688505] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.688529] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.688880] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.689164] pnp 00:05: [dma 0 disabled]
[    0.689223] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.689246] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.689268] pnp 00:07: Plug and Play ACPI device, IDs SYN018e SYN0100 SYN0002 PNP0f13 (active)
[    0.689503] system 00:08: [mem 0x20000000-0x201fffff] could not be reserved
[    0.689505] system 00:08: [mem 0x40004000-0x40004fff] could not be reserved
[    0.689507] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.689691] pnp: PnP ACPI: found 9 devices
[    0.696127] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.696134] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
[    0.696154] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000
[    0.696172] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.696174] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.696179] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref]
[    0.696181] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.696187] pci 0000:00:1c.0:   bridge window [mem 0xd4600000-0xd46fffff]
[    0.696195] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
[    0.696198] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
[    0.696203] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
[    0.696207] pci 0000:00:1c.1:   bridge window [mem 0xbf200000-0xbf3fffff 64bit pref]
[    0.696214] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref]
[    0.696216] pci 0000:00:1c.2: PCI bridge to [bus 23]
[    0.696221] pci 0000:00:1c.2:   bridge window [mem 0xd4500000-0xd45fffff]
[    0.696229] pci 0000:00:1c.3: PCI bridge to [bus 24]
[    0.696234] pci 0000:00:1c.3:   bridge window [mem 0xd4400000-0xd44fffff]
[    0.696243] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.696244] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.696245] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.696247] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[    0.696248] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
[    0.696249] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
[    0.696251] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
[    0.696252] pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
[    0.696254] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
[    0.696255] pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf3fffff 64bit pref]
[    0.696256] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff]
[    0.696258] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff]
[    0.696314] NET: Registered protocol family 2
[    0.696496] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.696625] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.696730] TCP: Hash tables configured (established 65536 bind 65536)
[    0.696755] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.696779] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.696858] NET: Registered protocol family 1
[    0.696872] pci 0000:00:02.0: Video device with shadowed ROM
[    0.696879] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    0.696995] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.696997] pci 0000:00:14.0: PCI INT A: no GSI
[    0.697513] PCI: CLS 64 bytes, default 64
[    0.697559] Unpacking initramfs...
[    0.987970] Freeing initrd memory: 18192K (ffff880035c68000 - ffff880036e2c000)
[    0.988029] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.988032] software IO TLB [mem 0xac6f1000-0xb06f1000] (64MB) mapped at [ffff8800ac6f1000-ffff8800b06f0fff]
[    0.988093] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.988094] hw unit of domain pp0-core 2^-16 Joules
[    0.988095] hw unit of domain package 2^-16 Joules
[    0.988096] hw unit of domain pp1-gpu 2^-16 Joules
[    0.988251] simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0x57f000 bytes, mapped to 0xffffc90001000000
[    0.988253] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1600x900x32, linelength=6400
[    0.991328] Console: switching to colour frame buffer device 200x56
[    0.994278] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.994548] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.994589] audit: initializing netlink subsys (disabled)
[    0.994605] audit: type=2000 audit(1459942027.936:1): initialized
[    0.995068] zbud: loaded
[    0.995561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.995593] io scheduler noop registered
[    0.995596] io scheduler deadline registered
[    0.995609] io scheduler cfq registered (default)
[    0.995665] pcieport 0000:00:1c.0: enabling device (0000 -> 0002)
[    0.995897] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.996458] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.996462] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.996483] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.996487] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.996506] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.996507] pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
[    0.996509] pci 0000:23:00.1: Signaling PME through PCIe PME interrupt
[    0.996510] pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
[    0.996514] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.996533] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.996535] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
[    0.996539] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.996546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.996558] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.996584] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    0.996588] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.996603] intel_idle: MWAIT substates: 0x21120
[    0.996604] intel_idle: v0.4 model 0x3A
[    0.996605] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.996798] GHES: HEST is not enabled!
[    0.996874] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.017576] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.018125] Linux agpgart interface v0.103
[    1.018191] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.018192] AMD IOMMUv2 functionality not available on this system
[    1.018684] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.020522] i8042: Detected active multiplexing controller, rev 1.1
[    1.021235] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.021239] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.021277] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.021310] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.021342] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.021535] mousedev: PS/2 mouse device common for all mice
[    1.021583] rtc_cmos 00:03: RTC can wake from S4
[    1.021748] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.021778] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.021790] Intel P-state driver initializing.
[    1.021974] ledtrig-cpu: registered to indicate activity on CPUs
[    1.023046] NET: Registered protocol family 10
[    1.023409] mip6: Mobile IPv6
[    1.023415] NET: Registered protocol family 17
[    1.023425] mpls_gso: MPLS GSO support
[    1.023769] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c
[    1.023785] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c
[    1.023794] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c
[    1.023808] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c
[    1.023867] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.024124] registered taskstats version 1
[    1.024178] zswap: loaded using pool lzo/zbud
[    1.024903] rtc_cmos 00:03: setting system clock to 2016-04-06 11:27:09 UTC (1459942029)
[    1.025028] PM: Hibernation image not present or could not be loaded.
[    1.026543] Freeing unused kernel memory: 1312K (ffffffff81b13000 - ffffffff81c5b000)
[    1.026546] Write protecting the kernel read-only data: 10240k
[    1.026942] Freeing unused kernel memory: 308K (ffff8800019b3000 - ffff880001a00000)
[    1.032114] Freeing unused kernel memory: 1224K (ffff880001cce000 - ffff880001e00000)
[    1.032123] ------------[ cut here ]------------
[    1.032131] WARNING: CPU: 3 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5e1/0x790()
[    1.032134] x86/mm: Found insecure W+X mapping at address ffff880000058000/0xffff880000058000
[    1.032136] Modules linked in:
[    1.032142] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.5.0+ #1
[    1.032144] Hardware name: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.31 09/24/2012
[    1.032146]  0000000000000286 00000000ed0370c7 ffffffff813012d5 ffff88023520bde0
[    1.032151]  ffffffff8180b63d ffffffff81078f2d ffff88023520bed0 ffff88023520be38
[    1.032155]  0000000000000004 0000000000000000 ffff88023520bed0 ffffffff81078fbc
[    1.032159] Call Trace:
[    1.032166]  [<ffffffff813012d5>] ? dump_stack+0x5c/0x77
[    1.032172]  [<ffffffff81078f2d>] ? warn_slowpath_common+0x7d/0xb0
[    1.032176]  [<ffffffff81078fbc>] ? warn_slowpath_fmt+0x5c/0x80
[    1.032182]  [<ffffffff810ca3ff>] ? vprintk_emit+0x36f/0x530
[    1.032186]  [<ffffffff8106ba11>] ? note_page+0x5e1/0x790
[    1.032191]  [<ffffffff8106bea0>] ? ptdump_walk_pgd_level_core+0x2e0/0x420
[    1.032198]  [<ffffffff8159f050>] ? rest_init+0x80/0x80
[    1.032202]  [<ffffffff8159f069>] ? kernel_init+0x19/0xe0
[    1.032207]  [<ffffffff815abbcf>] ? ret_from_fork+0x3f/0x70
[    1.032211]  [<ffffffff8159f050>] ? rest_init+0x80/0x80
[    1.032214] ---[ end trace fc22fb02191e9e11 ]---
[    1.046232] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.046761] x86/mm: Checked W+X mappings: FAILED, 72829 W+X pages found.
[    1.062216] random: systemd-udevd urandom read with 4 bits of entropy available
[    1.091333] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.110411] pps_core: LinuxPPS API ver. 1 registered
[    1.110415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.110799] PTP clock support registered
[    1.111871] ACPI: bus type USB registered
[    1.111918] usbcore: registered new interface driver usbfs
[    1.111938] usbcore: registered new interface driver hub
[    1.111977] usbcore: registered new device driver usb
[    1.112298] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.112301] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.112640] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.112726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.112997] ehci-pci: EHCI PCI platform driver
[    1.114833] sdhci: Secure Digital Host Controller Interface driver
[    1.114871] sdhci: Copyright(c) Pierre Ossman
[    1.115527] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30)
[    1.115545] sdhci-pci 0000:23:00.1: enabling device (0000 -> 0002)
[    1.116841] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA
[    1.116862] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
[    1.116940] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
[    1.120418] SCSI subsystem initialized
[    1.122649] libata version 3.00 loaded.
[    1.152706] thermal LNXTHERM:00: registered as thermal_zone0
[    1.152709] ACPI: Thermal Zone [CPUZ] (52 C)
[    1.182986] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    1.222181] thermal LNXTHERM:01: registered as thermal_zone1
[    1.222184] ACPI: Thermal Zone [GFXZ] (0 C)
[    1.256998] thermal LNXTHERM:02: registered as thermal_zone2
[    1.257002] ACPI: Thermal Zone [EXTZ] (42 C)
[    1.276672] thermal LNXTHERM:03: registered as thermal_zone3
[    1.276676] ACPI: Thermal Zone [LOCZ] (39 C)
[    1.291859] thermal LNXTHERM:04: registered as thermal_zone4
[    1.291866] ACPI: Thermal Zone [BATZ] (30 C)
[    1.292558] thermal LNXTHERM:05: registered as thermal_zone5
[    1.292561] ACPI: Thermal Zone [PCHZ] (0 C)
[    1.321456] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.321462] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 38:ea:a7:89:6a:8d
[    1.321465] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.321501] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    1.321905] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.321916] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.321935] ehci-pci 0000:00:1a.0: debug port 2
[    1.325862] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.325891] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4739000
[    1.334899] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.335003] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.335006] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.335009] usb usb1: Product: EHCI Host Controller
[    1.335012] usb usb1: Manufacturer: Linux 4.5.0+ ehci_hcd
[    1.335014] usb usb1: SerialNumber: 0000:00:1a.0
[    1.335367] hub 1-0:1.0: USB hub found
[    1.335379] hub 1-0:1.0: 3 ports detected
[    1.335900] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.335909] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.335927] ehci-pci 0000:00:1d.0: debug port 2
[    1.339838] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.339847] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4738000
[    1.350904] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.350974] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.350977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.350980] usb usb2: Product: EHCI Host Controller
[    1.350982] usb usb2: Manufacturer: Linux 4.5.0+ ehci_hcd
[    1.350984] usb usb2: SerialNumber: 0000:00:1d.0
[    1.351304] hub 2-0:1.0: USB hub found
[    1.351317] hub 2-0:1.0: 3 ports detected
[    1.351829] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.351834] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.351867] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.351876] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.352983] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.352992] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.353122] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.353125] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.353127] usb usb3: Product: xHCI Host Controller
[    1.353130] usb usb3: Manufacturer: Linux 4.5.0+ xhci-hcd
[    1.353132] usb usb3: SerialNumber: 0000:00:14.0
[    1.353427] hub 3-0:1.0: USB hub found
[    1.353443] hub 3-0:1.0: 4 ports detected
[    1.353982] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.353988] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.354040] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.354043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.354045] usb usb4: Product: xHCI Host Controller
[    1.354048] usb usb4: Manufacturer: Linux 4.5.0+ xhci-hcd
[    1.354050] usb usb4: SerialNumber: 0000:00:14.0
[    1.354353] hub 4-0:1.0: USB hub found
[    1.354370] hub 4-0:1.0: 4 ports detected
[    1.355032] ahci 0000:00:1f.2: version 3.0
[    1.355346] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.365484] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[    1.365489] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    1.395951] scsi host0: ahci
[    1.396190] scsi host1: ahci
[    1.396367] scsi host2: ahci
[    1.396583] scsi host3: ahci
[    1.396781] scsi host4: ahci
[    1.397032] scsi host5: ahci
[    1.397109] ata1: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737100 irq 32
[    1.397113] ata2: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737180 irq 32
[    1.397115] ata3: DUMMY
[    1.397119] ata4: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737280 irq 32
[    1.397122] ata5: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737300 irq 32
[    1.397126] ata6: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737380 irq 32
[    1.646918] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.662918] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.662920] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.682943] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.683255] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400
[    1.699384] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
[    1.699389] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.699392] usb 4-1: Product: USB5534
[    1.699394] usb 4-1: Manufacturer: SMSC
[    1.699397] usb 4-1: SerialNumber: 1239567
[    1.700105] hub 4-1:1.0: USB hub found
[    1.700144] hub 4-1:1.0: 4 ports detected
[    1.705799] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.706179] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.706183] ata1.00: supports DRM functions and may not be fully accessible
[    1.706244] ata1.00: ATA-9: MTFDDAK256MAM-1K12, 07TA, max UDMA/100
[    1.706247] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.706737] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.706744] ata1.00: supports DRM functions and may not be fully accessible
[    1.706823] ata1.00: configured for UDMA/100
[    1.708224] scsi 0:0:0:0: Direct-Access     ATA      MTFDDAK256MAM-1K 07TA PQ: 0 ANSI: 5
[    1.779416] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.779422] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.779820] hub 1-1:1.0: USB hub found
[    1.779952] hub 1-1:1.0: 6 ports detected
[    1.791111] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
[    1.791115] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.791419] hub 3-1:1.0: USB hub found
[    1.791459] hub 3-1:1.0: 4 ports detected
[    1.795410] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.795415] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.795828] hub 2-1:1.0: USB hub found
[    1.795981] hub 2-1:1.0: 8 ports detected
[    1.970913] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[    1.986907] tsc: Refined TSC clocksource calibration: 2594.106 MHz
[    1.986927] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns
[    1.987269] usb 4-1.2: New USB device found, idVendor=0451, idProduct=8140
[    1.987274] usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.988091] hub 4-1.2:1.0: USB hub found
[    1.988130] hub 4-1.2:1.0: 4 ports detected
[    2.045549] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.048463] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.048471] ata2.00: ATAPI: hp       DVDRAM GT80N, R102, max UDMA/100
[    2.050919] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    2.053466] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.053476] ata2.00: configured for UDMA/100
[    2.059290] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT80N     R102 PQ: 0 ANSI: 5
[    2.062932] usb 3-1.1: new low-speed USB device number 3 using xhci_hcd
[    2.066949] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[    2.090377] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
[    2.156502] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c03d
[    2.156507] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.156510] usb 3-1.1: Product: USB-PS/2 Optical Mouse
[    2.156512] usb 3-1.1: Manufacturer: Logitech
[    2.159106] hidraw: raw HID events driver (C) Jiri Kosina
[    2.162897] usbcore: registered new interface driver usbhid
[    2.162901] usbhid: USB HID core driver
[    2.163884] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C03D.0001/input/input9
[    2.164046] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.1/input0
[    2.164743] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1
[    2.164748] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.164750] usb 2-1.6: Product: BCM20702A0
[    2.164752] usb 2-1.6: Manufacturer: Broadcom Corp
[    2.164755] usb 2-1.6: SerialNumber: A41731B7139E
[    2.192354] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b230
[    2.192361] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.192364] usb 1-1.3: Product: HP HD Webcam [Fixed]
[    2.192367] usb 1-1.3: Manufacturer: Chicony Electronics Co., Ltd.
[    2.192369] usb 1-1.3: SerialNumber: SN0001
[    2.234936] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[    2.242937] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd
[    2.258961] usb 4-1.2.4: new SuperSpeed USB device number 4 using xhci_hcd
[    2.275173] usb 4-1.2.4: New USB device found, idVendor=0451, idProduct=8140
[    2.275178] usb 4-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.279040] hub 4-1.2.4:1.0: USB hub found
[    2.279151] hub 4-1.2.4:1.0: 2 ports detected
[    2.331281] usb 3-1.2: New USB device found, idVendor=0451, idProduct=8142
[    2.331286] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.331289] usb 3-1.2: SerialNumber: 2B050069F0AD
[    2.331620] hub 3-1.2:1.0: USB hub found
[    2.331649] hub 3-1.2:1.0: 4 ports detected
[    2.334646] usb 2-1.8: New USB device found, idVendor=058f, idProduct=9540
[    2.334667] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.334670] usb 2-1.8: Product: EMV Smartcard Reader
[    2.334672] usb 2-1.8: Manufacturer: Generic
[    2.377573] ata4: SATA link down (SStatus 0 SControl 300)
[    2.602946] usb 3-1.2.4: new high-speed USB device number 5 using xhci_hcd
[    2.685568] ata5: SATA link down (SStatus 0 SControl 300)
[    2.691364] usb 3-1.2.4: New USB device found, idVendor=0451, idProduct=8142
[    2.691369] usb 3-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.691372] usb 3-1.2.4: SerialNumber: 3B050079F0AD
[    2.691771] hub 3-1.2.4:1.0: USB hub found
[    2.691834] hub 3-1.2.4:1.0: 2 ports detected
[    2.898126] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
[    2.967174] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122
[    2.987173] clocksource: Switched to clocksource tsc
[    2.993565] ata6: SATA link down (SStatus 0 SControl 300)
[    2.997560] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    2.997706] sd 0:0:0:0: [sda] Write Protect is off
[    2.997714] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.997758] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.999561]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    3.000403] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.010505] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.010511] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.010838] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.011041] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    3.116645] device-mapper: uevent: version 1.0.3
[    3.116713] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.242905] raid6: sse2x1   gen()  6441 MB/s
[    3.310898] raid6: sse2x1   xor()  6044 MB/s
[    3.378898] raid6: sse2x2   gen() 11168 MB/s
[    3.446900] raid6: sse2x2   xor()  7984 MB/s
[    3.514902] raid6: sse2x4   gen() 13074 MB/s
[    3.582904] raid6: sse2x4   xor()  9780 MB/s
[    3.582905] raid6: using algorithm sse2x4 gen() 13074 MB/s
[    3.582906] raid6: .... xor() 9780 MB/s, rmw enabled
[    3.582907] raid6: using ssse3x2 recovery algorithm
[    3.583186] xor: automatically using best checksumming function:
[    3.622902]    avx       : 23553.000 MB/sec
[    3.626234] Btrfs loaded
[    3.713517] BTRFS: device fsid 1b8c448d-adff-4564-9e8a-d8dc16dd4637 devid 1 transid 429862 /dev/mapper/linux-root
[    3.716455] PM: Starting manual resume from disk
[    3.716462] PM: Hibernation image partition 254:1 present
[    3.716464] PM: Looking for hibernation image.
[    3.716694] PM: Image not found (code -22)
[    3.716696] PM: Hibernation image not present or could not be loaded.
[    3.740522] BTRFS info (device dm-0): disk space caching is enabled
[    3.757261] BTRFS: detected SSD devices, enabling SSD mode
[    6.118954] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.119142] systemd[1]: Detected architecture x86-64.
[    6.120133] systemd[1]: Set hostname to <elitebook>.
[    6.246328] systemd-sysv-generator[235]: Overwriting existing symlink /run/systemd/generator.late/console-setup.service with real service.
[    6.246404] systemd-sysv-generator[235]: Overwriting existing symlink /run/systemd/generator.late/keyboard-setup.service with real service.
[    6.333202] systemd[1]: Listening on Journal Audit Socket.
[    6.333293] systemd[1]: Listening on udev Kernel Socket.
[    6.333331] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.333371] systemd[1]: Listening on udev Control Socket.
[    6.333402] systemd[1]: Listening on Syslog Socket.
[    6.333440] systemd[1]: Listening on Journal Socket.
[    6.333472] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.333614] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.333771] systemd[1]: Created slice System Slice.
[    6.343165] systemd[1]: Starting Load Kernel Modules...
[    6.343817] systemd[1]: Mounting Debug File System...
[    6.343926] systemd[1]: Listening on LVM2 poll daemon socket.
[    6.344033] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.344150] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.344227] systemd[1]: Reached target User and Group Name Lookups.
[    6.344794] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    6.345314] systemd[1]: Mounting Temporary Directory...
[    6.345538] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.346435] systemd[1]: Mounting POSIX Message Queue File System...
[    6.348168] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.348505] systemd[1]: Created slice User and Session Slice.
[    6.348548] systemd[1]: Reached target Slices.
[    6.349404] systemd[1]: Mounting Huge Pages File System...
[    6.349542] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.350381] systemd[1]: Starting Journal Service...
[    6.350454] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.353490] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    6.353534] systemd[1]: Reached target Encrypted Volumes.
[    6.353777] systemd[1]: Created slice system-getty.slice.
[    6.357792] systemd[1]: Reached target Remote File Systems (Pre).
[    6.357834] systemd[1]: Reached target Remote File Systems.
[    6.359428] lp: driver loaded but no devices found
[    6.360174] systemd[1]: Mounted POSIX Message Queue File System.
[    6.360285] systemd[1]: Mounted Debug File System.
[    6.360348] systemd[1]: Mounted Huge Pages File System.
[    6.360410] systemd[1]: Mounted Temporary Directory.
[    6.360804] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.364475] ppdev: user-space parallel port driver
[    6.368581] parport_pc 00:05: reported by Plug and Play ACPI
[    6.368661] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[    6.385166] systemd[1]: Started LVM2 metadata daemon.
[    6.385940] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.399608] systemd[1]: Started Journal Service.
[    6.463145] lp0: using parport0 (interrupt-driven).
[    6.466920] loop: module loaded
[    6.623906] BTRFS info (device dm-0): enabling inode map caching
[    6.623912] BTRFS info (device dm-0): disk space caching is enabled
[    6.652063] systemd-journald[261]: Received request to flush runtime journal from PID 1
[    6.691804] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
[    6.691811] ACPI: Sleep Button [SLPB]
[    6.691873] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
[    6.691912] ACPI: Lid Switch [LID]
[    6.691955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[    6.691957] ACPI: Power Button [PWRF]
[    6.692733] ACPI: AC Adapter [AC] (on-line)
[    6.693121] Initializing HPQ6001 module
[    6.693170] input: HP Wireless hotkeys as /devices/virtual/input/input13
[    6.698656] hp_accel: hardware type HPB64xx found
[    6.699290] lis3lv02d: 8 bits 3DC sensor found
[    6.738098] [drm] Initialized drm 1.1.0 20060810
[    6.739076] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
[    6.744150] ACPI: Battery Slot [BAT0] (battery present)
[    6.744237] ACPI: Battery Slot [BAT1] (battery absent)
[    6.744738] wmi: Mapper loaded
[    6.759050] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[    6.768052] [drm] Memory usable by graphics device = 2048M
[    6.768056] checking generic (c0000000 57f000) vs hw (c0000000 10000000)
[    6.768058] fb: switching to inteldrmfb from simple
[    6.768097] Console: switching to colour dummy device 80x25
[    6.768243] [drm] Replacing VGA console driver
[    6.775052] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.775055] [drm] Driver supports precise vblank timestamp query.
[    6.775392] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.827224] media: Linux media interface: v0.10
[    6.830551] Linux video capture interface: v2.00
[    6.836089] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230)
[    6.987045] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[    7.043789] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.043836] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    7.061943] EFI Variables Facility v0.08 2004-May-17
[    7.073243] uvcvideo 1-1.3:1.0: Entity type for entity Extension 5 was not initialized!
[    7.073247] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[    7.073248] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized!
[    7.073250] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[    7.073316] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
[    7.073389] usbcore: registered new interface driver uvcvideo
[    7.073390] USB Video Class driver (1.1.1)
[    7.083159] fbcon: inteldrmfb (fb0) is primary device
[    7.140378] Bluetooth: Core ver 2.21
[    7.140392] NET: Registered protocol family 31
[    7.140392] Bluetooth: HCI device and connection manager initialized
[    7.140397] Bluetooth: HCI socket layer initialized
[    7.140401] Bluetooth: L2CAP socket layer initialized
[    7.140408] Bluetooth: SCO socket layer initialized
[    7.167295] usbcore: registered new interface driver btusb
[    7.274144] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    7.289880] AVX version of gcm_enc/dec engaged.
[    7.289881] AES CTR mode by8 optimization enabled
[    7.324223] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    7.969762] intel_rapl: Found RAPL domain package
[    7.969763] intel_rapl: Found RAPL domain core
[    7.969764] intel_rapl: Found RAPL domain uncore
[    8.375402] input: HP WMI hotkeys as /devices/virtual/input/input16
[    8.391453] Console: switching to colour frame buffer device 200x56
[    8.397553] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.473213] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.473523] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17
[    8.475142] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[    8.475175] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.475584] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    8.476917] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255)
[    8.476923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.476927] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    8.476931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.476932] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    8.476936] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.476937] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    8.476940] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.476942] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.510774] Adding 7811068k swap on /dev/mapper/linux-swap.  Priority:-1 extents:1 across:7811068k SSFS
[    8.588186] Intel(R) Wireless WiFi driver for Linux
[    8.588189] Copyright(c) 2003- 2015 Intel Corporation
[    8.588267] iwlwifi 0000:24:00.0: enabling device (0000 -> 0002)
[    8.588380] iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control
[    8.588823] iTCO_vendor_support: vendor-support=0
[    8.589233] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    8.589237] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    8.589239] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    8.589240] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    8.589241] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    8.589244] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[    8.589245] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    8.589247] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[    8.589543] iwlwifi 0000:24:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[    8.589830] iwlwifi 0000:24:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[    8.589888] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.589930] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    8.595055] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.599305] iwlwifi 0000:24:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[    8.625814] BTRFS: device fsid 8a222552-5d49-416e-ab77-7abff1e9a0e3 devid 1 transid 687327 /dev/dm-2
[    8.677185] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    8.677189] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    8.677190] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    8.677193] iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[    8.677370] iwlwifi 0000:24:00.0: L1 Enabled - LTR Disabled
[    8.701561] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.714271] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    8.714312] BTRFS info (device dm-2): enabling inode map caching
[    8.714315] BTRFS info (device dm-2): disk space caching is enabled
[    8.714971] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.715305] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    8.715375] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    8.715441] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    8.715507] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    8.715567] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    8.715626] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[    8.715698] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[    8.727677] random: nonblocking pool is initialized
[    8.772520] BTRFS: detected SSD devices, enabling SSD mode
[    8.856534] pstore: Registered efi as persistent store backend
[    8.866489] BTRFS error (device dm-2): could not find root 8
[    9.102282] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    9.212920] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.212922] Bluetooth: BNEP filters: protocol multicast
[    9.212927] Bluetooth: BNEP socket layer initialized
[    9.343278] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.497846] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.510658] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.663722] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    9.696037] Netfilter messages via NETLINK v0.30.
[    9.696949] ctnetlink v0.93: registering with nfnetlink.
[    9.946512] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.958872] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.188163] xt_CT: No such helper "netbios-ns"
[   10.190719] xt_CT: No such helper "pptp"
[   10.193559] xt_CT: No such helper "snmp"
[   10.203626] xt_CT: No such helper "irc"
[   10.206587] xt_CT: No such helper "irc-0"
[   10.278095] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   10.306862] xt_addrtype: ipv6 does not support BROADCAST matching
[   10.533621] Ebtables v2.0 registered
[   10.741057] tun: Universal TUN/TAP device driver, 1.6
[   10.741060] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   10.795232] device virbr0-nic entered promiscuous mode
[   10.897641] virbr0: port 1(virbr0-nic) entered listening state
[   10.897653] virbr0: port 1(virbr0-nic) entered listening state
[   10.932793] virbr0: port 1(virbr0-nic) entered disabled state
[   10.935614] device virbr0-nic left promiscuous mode
[   10.935631] virbr0: port 1(virbr0-nic) entered disabled state
[   11.073110] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   11.073115] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[   11.073154] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.221021] IPv4: martian source 255.255.255.255 from 192.168.1.1, on dev eth0
[   17.221052] ll header: 00000000: ff ff ff ff ff ff 84 1b 5e e1 09 36 08 00        ........^..6..
[   23.367068] fuse init (API version 7.24)
[ 3027.097486] usb 3-1: USB disconnect, device number 2
[ 3027.097494] usb 3-1.1: USB disconnect, device number 3
[ 3027.100167] e1000e: eth0 NIC Link is Down
[ 3027.128504] usb 3-1.2: USB disconnect, device number 4
[ 3027.128520] usb 3-1.2.4: USB disconnect, device number 5
[ 3027.138205] usb 4-1: USB disconnect, device number 2
[ 3027.138215] usb 4-1.2: USB disconnect, device number 3
[ 3027.138221] usb 4-1.2.4: USB disconnect, device number 4
[ 3028.115996] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3028.119766] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3028.121695] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3028.121849] acpi PNP0501:00: Still not present
[ 3028.122066] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3028.957570] e1000e: eth0 NIC Link is Down
[ 3028.967320] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
[ 3411.989164] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 3413.095591] IPv4: martian source 255.255.255.255 from 192.168.0.1, on dev eth0
[ 3413.095615] ll header: 00000000: ff ff ff ff ff ff e8 de 27 f5 be 5a 08 00        ........'..Z..
[ 3413.176205] IPv4: martian source 255.255.255.255 from 192.168.0.1, on dev eth0
[ 3413.176233] ll header: 00000000: ff ff ff ff ff ff e8 de 27 f5 be 5a 08 00        ........'..Z..
[ 3838.941092] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3839.134901] e1000e: eth0 NIC Link is Down
[ 3839.139602] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3840.475448] PM: Syncing filesystems ... done.
[ 3840.663964] PM: Preparing system for sleep (mem)
[ 3840.664306] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 3840.666510] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3840.667903] PM: Suspending system (mem)
[ 3840.667932] Suspending console(s) (use no_console_suspend to debug)
[ 3840.668500] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3840.668670] sd 0:0:0:0: [sda] Stopping disk
[ 3840.724197] parport_pc 00:05: disabled
[ 3840.724590] serial 00:04: disabled
[ 3840.830492] e1000e: EEE TX LPI TIMER: 00000011
[ 3841.354419] PM: suspend of devices complete after 686.256 msecs
[ 3841.370428] PM: late suspend of devices complete after 15.995 msecs
[ 3841.372219] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 3841.372403] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 3841.372510] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 3841.386486] PM: noirq suspend of devices complete after 16.053 msecs
[ 3841.386894] ACPI: Preparing to enter system sleep state S3
[ 3841.406730] ACPI : EC: EC stopped
[ 3841.406730] PM: Saving platform NVS memory
[ 3841.406737] Disabling non-boot CPUs ...
[ 3841.407131] Broke affinity for irq 16
[ 3841.407135] Broke affinity for irq 18
[ 3841.407147] Broke affinity for irq 27
[ 3841.407155] Broke affinity for irq 29
[ 3841.407159] Broke affinity for irq 31
[ 3841.407163] Broke affinity for irq 32
[ 3841.408208] smpboot: CPU 1 is now offline
[ 3841.419223] Broke affinity for irq 16
[ 3841.419227] Broke affinity for irq 18
[ 3841.419239] Broke affinity for irq 27
[ 3841.419246] Broke affinity for irq 29
[ 3841.419250] Broke affinity for irq 31
[ 3841.419254] Broke affinity for irq 32
[ 3841.419259] Broke affinity for irq 34
[ 3841.419263] Broke affinity for irq 36
[ 3841.420304] smpboot: CPU 2 is now offline
[ 3841.435059] Broke affinity for irq 1
[ 3841.435063] Broke affinity for irq 5
[ 3841.435066] Broke affinity for irq 8
[ 3841.435069] Broke affinity for irq 9
[ 3841.435072] Broke affinity for irq 12
[ 3841.435076] Broke affinity for irq 16
[ 3841.435079] Broke affinity for irq 18
[ 3841.435082] Broke affinity for irq 23
[ 3841.435086] Broke affinity for irq 26
[ 3841.435089] Broke affinity for irq 27
[ 3841.435091] Broke affinity for irq 28
[ 3841.435094] Broke affinity for irq 29
[ 3841.435098] Broke affinity for irq 31
[ 3841.435100] Broke affinity for irq 32
[ 3841.435104] Broke affinity for irq 34
[ 3841.435107] Broke affinity for irq 36
[ 3841.436139] smpboot: CPU 3 is now offline
[ 3841.451935] ACPI: Low-level resume complete
[ 3841.451980] ACPI : EC: EC started
[ 3841.451980] PM: Restoring platform NVS memory
[ 3841.452931] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[ 3841.452960] Enabling non-boot CPUs ...
[ 3841.471984] x86: Booting SMP configuration:
[ 3841.471985] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3841.474775]  cache: parent cpu1 should not be sleeping
[ 3841.475046] CPU1 is up
[ 3841.492029] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 3841.492801] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[ 3841.495182]  cache: parent cpu2 should not be sleeping
[ 3841.495444] CPU2 is up
[ 3841.512086] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3841.514975]  cache: parent cpu3 should not be sleeping
[ 3841.515238] CPU3 is up
[ 3841.520466] ACPI: Waking up from system sleep state S3
[ 3841.687248] acpi LNXPOWER:02: Turning OFF
[ 3841.699931] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 3841.699966] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 3841.704292] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 3841.731840] PM: noirq resume of devices complete after 44.494 msecs
[ 3841.732364] PM: early resume of devices complete after 0.494 msecs
[ 3841.742964] sd 0:0:0:0: [sda] Starting disk
[ 3841.963755] usb 1-1.3: reset high-speed USB device number 3 using ehci-pci
[ 3841.963766] usb 2-1.6: reset full-speed USB device number 3 using ehci-pci
[ 3842.082176] ata5: SATA link down (SStatus 0 SControl 300)
[ 3842.082270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3842.082291] ata6: SATA link down (SStatus 0 SControl 300)
[ 3842.082385] ata4: SATA link down (SStatus 0 SControl 300)
[ 3842.082411] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3842.084965] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3842.084969] ata1.00: supports DRM functions and may not be fully accessible
[ 3842.085402] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3842.085432] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3842.085435] ata1.00: supports DRM functions and may not be fully accessible
[ 3842.085501] ata1.00: configured for UDMA/100
[ 3842.089090] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3842.089095] ata2.00: configured for UDMA/100
[ 3842.127762] usb 2-1.8: reset full-speed USB device number 4 using ehci-pci
[ 3842.183617] hp_wmi: Unknown event_id - 0 - 0x0
[ 3842.287790] firewire_core 0000:23:00.0: rediscovered device fw0
[ 3842.643779] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 3842.643786] rtc_cmos 00:03: System wakeup disabled by ACPI
[ 3842.645153] serial 00:04: activated
[ 3842.646604] parport_pc 00:05: activated
[ 3842.651496] PM: resume of devices complete after 919.130 msecs
[ 3842.651575] usb 2-1.6:1.0: rebind failed: -517
[ 3842.651579] usb 2-1.6:1.1: rebind failed: -517
[ 3842.651865] PM: Finishing wakeup.
[ 3842.651868] Restarting tasks ... done.
[ 3842.768234] usb 3-1: new high-speed USB device number 6 using xhci_hcd
[ 3842.845874] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3842.846069] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3842.846478] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3842.848512] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3842.858754] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3842.860141] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3842.897369] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
[ 3842.897379] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3842.898182] hub 3-1:1.0: USB hub found
[ 3842.898248] hub 3-1:1.0: 4 ports detected
[ 3842.935784] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd
[ 3842.952142] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
[ 3842.952150] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3842.952154] usb 4-1: Product: USB5534
[ 3842.952158] usb 4-1: Manufacturer: SMSC
[ 3842.952161] usb 4-1: SerialNumber: 1239567
[ 3842.953756] hub 4-1:1.0: USB hub found
[ 3842.953797] hub 4-1:1.0: 4 ports detected
[ 3843.061763] usb 2-1.8: usbfs: process 5773 (pcscd) did not claim interface 0 before use
[ 3843.100034] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3843.171743] usb 3-1.1: new low-speed USB device number 7 using xhci_hcd
[ 3843.223766] usb 4-1.2: new SuperSpeed USB device number 6 using xhci_hcd
[ 3843.240579] usb 4-1.2: New USB device found, idVendor=0451, idProduct=8140
[ 3843.240587] usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3843.242465] hub 4-1.2:1.0: USB hub found
[ 3843.242502] hub 4-1.2:1.0: 4 ports detected
[ 3843.275744] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c03d
[ 3843.275750] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3843.275754] usb 3-1.1: Product: USB-PS/2 Optical Mouse
[ 3843.275757] usb 3-1.1: Manufacturer: Logitech
[ 3843.281099] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C03D.0002/input/input26
[ 3843.281321] hid-generic 0003:046D:C03D.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.1/input0
[ 3843.319328] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 3843.350126] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
[ 3843.367733] usb 3-1.2: new high-speed USB device number 8 using xhci_hcd
[ 3843.456208] usb 3-1.2: New USB device found, idVendor=0451, idProduct=8142
[ 3843.456215] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 3843.456218] usb 3-1.2: SerialNumber: 2B050069F0AD
[ 3843.456561] hub 3-1.2:1.0: USB hub found
[ 3843.456594] hub 3-1.2:1.0: 4 ports detected
[ 3843.511944] usb 4-1.2.4: new SuperSpeed USB device number 7 using xhci_hcd
[ 3843.527970] usb 4-1.2.4: New USB device found, idVendor=0451, idProduct=8140
[ 3843.527977] usb 4-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3843.532243] hub 4-1.2.4:1.0: USB hub found
[ 3843.532306] hub 4-1.2.4:1.0: 2 ports detected
[ 3843.727711] usb 3-1.2.4: new high-speed USB device number 9 using xhci_hcd
[ 3843.815992] usb 3-1.2.4: New USB device found, idVendor=0451, idProduct=8142
[ 3843.815998] usb 3-1.2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 3843.816000] usb 3-1.2.4: SerialNumber: 3B050079F0AD
[ 3843.816650] hub 3-1.2.4:1.0: USB hub found
[ 3843.816693] hub 3-1.2.4:1.0: 2 ports detected
[ 3844.114066] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
[ 3844.745658] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 3844.745664] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 3844.745700] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 3849.276835] IPv4: martian source 255.255.255.255 from 134.184.26.2, on dev eth0
[ 3849.276843] ll header: 00000000: ff ff ff ff ff ff 52 54 00 04 5a 07 08 00        ......RT..Z...