[ 0.000000] Linux version 4.5.1-gentoo (root@keskus) (gcc version 5.3.0 (Gentoo 5.3.0 p1.0, pie-0.6.5) ) #1 SMP PREEMPT Sun Apr 24 12:02:54 EEST 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/kernel-4.5.1-gentoo root=/dev/sda1 ro init=/usr/lib/systemd/systemd [ 0.000000] tseg: 0000000000 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7f90000-0x00000000c7fa7fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c7fa8000-0x00000000c7fcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c7fd0000-0x00000000c7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000337ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-V EVO/USB3, BIOS 2301 08/09/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x338000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000338000000 aka 13184M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xc7f90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x01fcf000, 0x01fcffff] PGTABLE [ 0.000000] BRK [0x01fd0000, 0x01fd0fff] PGTABLE [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FBB90 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000C7F90100 00005C (v01 080912 XSDT1543 20120809 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000C7F90290 0000F4 (v03 080912 FACP1543 20120809 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160108/tbfadt-623) [ 0.000000] ACPI: DSDT 0x00000000C7F90450 00E65B (v01 A1638 A1638001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000C7FA8000 000040 [ 0.000000] ACPI: FACS 0x00000000C7FA8000 000040 [ 0.000000] ACPI: APIC 0x00000000C7F90390 00007C (v01 080912 APIC1543 20120809 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000C7F90410 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000C7FA8040 000072 (v01 080912 OEMB1543 20120809 MSFT 00000097) [ 0.000000] ACPI: SRAT 0x00000000C7F9F8A0 000108 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 0x00000000C7F9F9B0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000C7F9F9F0 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x337ffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x337ffffff] -> [mem 0x00000000-0x337ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x337ffa000-0x337ffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000337ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c7f8ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000337ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000337ffffff] [ 0.000000] On node 0 totalpages: 3145513 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3993 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12735 pages used for memmap [ 0.000000] DMA32 zone: 814992 pages, LIFO batch:31 [ 0.000000] Normal zone: 36352 pages used for memmap [ 0.000000] Normal zone: 2326528 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7f90000-0xc7fa7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7fa8000-0xc7fcffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7fd0000-0xc7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xc8000000-0xff9fffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880337c00000 s91224 r8192 d31656 u262144 [ 0.000000] pcpu-alloc: s91224 r8192 d31656 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3096341 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-4.5.1-gentoo root=/dev/sda1 ro init=/usr/lib/systemd/systemd [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xbc000000-0xbdffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff] [ 0.000000] Memory: 12236620K/12582052K available (7608K kernel code, 1139K rwdata, 2464K rodata, 1012K init, 1704K bss, 345432K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=12 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:4352 nr_irqs:472 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3314.522 MHz processor [ 0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 6629.04 BogoMIPS (lpj=3314522) [ 0.000226] pid_max: default: 32768 minimum: 301 [ 0.000340] ACPI: Core revision 20160108 [ 0.005142] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.005397] Security Framework initialized [ 0.005503] SELinux: Initializing. [ 0.005614] SELinux: Starting in permissive mode [ 0.006337] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.010794] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012956] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.013075] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.013566] CPU: Physical Processor ID: 0 [ 0.013670] CPU: Processor Core ID: 0 [ 0.013774] mce: CPU supports 6 MCE banks [ 0.013882] LVT offset 0 assigned for vector 0xf9 [ 0.013987] process: using AMD E400 aware idle routine [ 0.014091] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.014195] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.014501] Freeing SMP alternatives memory: 32K (ffffffff81e1b000 - ffffffff81e23000) [ 0.119261] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.231262] smpboot: CPU0: AMD Phenom(tm) II X6 1100T Processor (family: 0x10, model: 0xa, stepping: 0x0) [ 0.231538] Performance Events: AMD PMU driver. [ 0.231672] ... version: 0 [ 0.231776] ... bit width: 48 [ 0.231879] ... generic registers: 4 [ 0.231982] ... value mask: 0000ffffffffffff [ 0.232085] ... max period: 00007fffffffffff [ 0.232188] ... fixed-purpose events: 0 [ 0.232293] ... event mask: 000000000000000f [ 0.232428] process: System has AMD C1E enabled [ 0.232537] process: Switch to broadcast mode on CPU0 [ 0.237628] MCE: In-kernel MCE decoding enabled. [ 0.240605] x86: Booting SMP configuration: [ 0.240712] .... node #0, CPUs: #1 [ 0.243399] process: Switch to broadcast mode on CPU1 [ 0.245608] #2 [ 0.248236] process: Switch to broadcast mode on CPU2 [ 0.250613] #3 [ 0.253253] process: Switch to broadcast mode on CPU3 [ 0.255621] #4 [ 0.258266] process: Switch to broadcast mode on CPU4 [ 0.260624] #5 [ 0.263260] x86: Booted up 1 node, 6 CPUs [ 0.263272] process: Switch to broadcast mode on CPU5 [ 0.263600] smpboot: Total of 6 processors activated (39774.26 BogoMIPS) [ 0.270173] devtmpfs: initialized [ 0.270487] PM: Registering ACPI NVS region [mem 0xc7fa8000-0xc7fcffff] (163840 bytes) [ 0.270743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.270979] xor: measuring software checksum speed [ 0.280563] prefetch64-sse: 14096.000 MB/sec [ 0.290559] generic_sse: 13376.000 MB/sec [ 0.290670] xor: using function: prefetch64-sse (14096.000 MB/sec) [ 0.290782] pinctrl core: initialized pinctrl subsystem [ 0.290917] RTC time: 19:33:03, date: 04/24/16 [ 0.291088] NET: Registered protocol family 16 [ 0.296622] cpuidle: using governor ladder [ 0.301621] cpuidle: using governor menu [ 0.301734] node 0 link 0: io port [1000, ffffff] [ 0.301736] TOM: 00000000c8000000 aka 3200M [ 0.301840] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.301842] node 0 link 0: mmio [a0000, bffff] [ 0.301844] node 0 link 0: mmio [c8000000, dfffffff] [ 0.301846] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.301847] node 0 link 0: mmio [f0000000, ffdfffff] [ 0.301849] TOM2: 0000000338000000 aka 13184M [ 0.301952] bus: [bus 00-07] on node 0 link 0 [ 0.301953] bus: 00 [io 0x0000-0xffff] [ 0.301955] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.301956] bus: 00 [mem 0xc8000000-0xdfffffff] [ 0.301957] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.301958] bus: 00 [mem 0x338000000-0xfcffffffff] [ 0.302039] ACPI: bus type PCI registered [ 0.302178] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.304452] PCI: not using MMCONFIG [ 0.304578] PCI: Using configuration type 1 for base access [ 0.304686] PCI: Using configuration type 1 for extended access [ 0.304955] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.305059] mtrr: probably your BIOS does not setup all CPUs. [ 0.305162] mtrr: corrected configuration. [ 0.310711] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.327604] raid6: sse2x1 gen() 4484 MB/s [ 0.344563] raid6: sse2x1 xor() 4740 MB/s [ 0.361598] raid6: sse2x2 gen() 7378 MB/s [ 0.378563] raid6: sse2x2 xor() 7976 MB/s [ 0.395596] raid6: sse2x4 gen() 8179 MB/s [ 0.412590] raid6: sse2x4 xor() 3744 MB/s [ 0.412696] raid6: using algorithm sse2x4 gen() 8179 MB/s [ 0.412801] raid6: .... xor() 3744 MB/s, rmw enabled [ 0.412904] raid6: using intx1 recovery algorithm [ 0.413082] ACPI: Added _OSI(Module Device) [ 0.413185] ACPI: Added _OSI(Processor Device) [ 0.413289] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.413393] ACPI: Added _OSI(Processor Aggregator Device) [ 0.414526] ACPI: Executed 3 blocks of module-level executable AML code [ 0.577924] ACPI : EC: EC started [ 0.578085] ACPI: Interpreter enabled [ 0.578204] ACPI: (supports S0 S1 S3 S4 S5) [ 0.578308] ACPI: Using IOAPIC for interrupt routing [ 0.578433] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.579612] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.579804] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.583699] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.583807] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.584120] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.584366] PCI host bridge to bus 0000:00 [ 0.584470] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.584596] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.584702] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.584882] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.585064] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff window] [ 0.585243] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.585419] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.585529] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.585656] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.585687] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.585724] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.585859] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400 [ 0.585889] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.585924] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.586054] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.586082] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.586114] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.586245] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.586258] pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007] [ 0.586265] pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003] [ 0.586272] pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007] [ 0.586278] pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003] [ 0.586285] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f] [ 0.586292] pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff] [ 0.586369] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.586379] pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff] [ 0.586450] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.586616] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.586628] pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff] [ 0.586686] pci 0000:00:12.2: supports D1 D2 [ 0.586688] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.586724] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.586858] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.586867] pci 0000:00:13.0: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff] [ 0.586944] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.587074] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.587086] pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff] [ 0.587143] pci 0000:00:13.2: supports D1 D2 [ 0.587144] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.587177] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.587307] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.587403] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.587418] pci 0000:00:14.2: reg 0x10: [mem 0xfe6f4000-0xfe6f7fff 64bit] [ 0.587466] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.587497] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.587633] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.587737] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.587795] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.587928] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.587937] pci 0000:00:14.5: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff] [ 0.588008] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.588140] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.588190] pci 0000:00:15.0: supports D1 D2 [ 0.588224] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.588354] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 0.588404] pci 0000:00:15.1: supports D1 D2 [ 0.588438] pci 0000:00:15.1: System wakeup disabled by ACPI [ 0.588604] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.588614] pci 0000:00:16.0: reg 0x10: [mem 0xfe6f3000-0xfe6f3fff] [ 0.588689] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.588823] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.588835] pci 0000:00:16.2: reg 0x10: [mem 0xfe6ff000-0xfe6ff0ff] [ 0.588893] pci 0000:00:16.2: supports D1 D2 [ 0.588895] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.588935] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.589064] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.589116] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.589167] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.589216] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.589268] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.589352] pci 0000:01:00.0: [1002:665f] type 00 class 0x030000 [ 0.589365] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.589375] pci 0000:01:00.0: reg 0x18: [mem 0xcf800000-0xcfffffff 64bit pref] [ 0.589381] pci 0000:01:00.0: reg 0x20: [io 0xa000-0xa0ff] [ 0.589387] pci 0000:01:00.0: reg 0x24: [mem 0xfe7c0000-0xfe7fffff] [ 0.589394] pci 0000:01:00.0: reg 0x30: [mem 0xfe7a0000-0xfe7bffff pref] [ 0.589441] pci 0000:01:00.0: supports D1 D2 [ 0.589442] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.589491] pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300 [ 0.589504] pci 0000:01:00.1: reg 0x10: [mem 0xfe79c000-0xfe79ffff 64bit] [ 0.589583] pci 0000:01:00.1: supports D1 D2 [ 0.591630] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.591739] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.591742] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.591745] pci 0000:00:02.0: bridge window [mem 0xcf800000-0xdfffffff 64bit pref] [ 0.591800] pci 0000:02:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.591832] pci 0000:02:00.0: reg 0x10: [mem 0xfe8ff800-0xfe8fffff 64bit] [ 0.591847] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff] [ 0.591981] pci 0000:02:00.0: supports D2 [ 0.591982] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold [ 0.592065] pci 0000:02:00.1: [1106:0415] type 00 class 0x010185 [ 0.592089] pci 0000:02:00.1: reg 0x10: [io 0xbc00-0xbc07] [ 0.592103] pci 0000:02:00.1: reg 0x14: [io 0xb480-0xb483] [ 0.592117] pci 0000:02:00.1: reg 0x18: [io 0xb400-0xb407] [ 0.592131] pci 0000:02:00.1: reg 0x1c: [io 0xb080-0xb083] [ 0.592145] pci 0000:02:00.1: reg 0x20: [io 0xb000-0xb00f] [ 0.592172] pci 0000:02:00.1: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref] [ 0.592249] pci 0000:02:00.1: supports D2 [ 0.592250] pci 0000:02:00.1: PME# supported from D2 D3hot D3cold [ 0.593641] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.593748] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.593751] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.593796] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.593811] pci 0000:03:00.0: reg 0x10: [mem 0xfe9fe000-0xfe9fffff 64bit] [ 0.593887] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.595630] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.595739] pci 0000:00:0a.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.595781] pci 0000:04:06.0: [13f6:0111] type 00 class 0x040100 [ 0.595798] pci 0000:04:06.0: reg 0x10: [io 0xc800-0xc8ff] [ 0.595885] pci 0000:04:06.0: supports D1 D2 [ 0.595943] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.596050] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.596055] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.596056] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.596062] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.596063] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.596064] pci 0000:00:14.4: bridge window [mem 0xc8000000-0xdfffffff window] (subtractive decode) [ 0.596066] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.596112] pci 0000:05:00.0: [10ec:8178] type 00 class 0x028000 [ 0.596132] pci 0000:05:00.0: reg 0x10: [io 0xd800-0xd8ff] [ 0.596160] pci 0000:05:00.0: reg 0x18: [mem 0xfeafc000-0xfeafffff 64bit] [ 0.596263] pci 0000:05:00.0: supports D1 D2 [ 0.596264] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.597634] pci 0000:00:15.0: PCI bridge to [bus 05] [ 0.597744] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 0.597747] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.597803] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 0.597821] pci 0000:06:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.597846] pci 0000:06:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.597862] pci 0000:06:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.597873] pci 0000:06:00.0: reg 0x30: [mem 0xfebf0000-0xfebfffff pref] [ 0.597949] pci 0000:06:00.0: supports D1 D2 [ 0.597950] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.597991] pci 0000:06:00.0: System wakeup disabled by ACPI [ 0.599633] pci 0000:00:15.1: PCI bridge to [bus 06] [ 0.599743] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 0.599745] pci 0000:00:15.1: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.599750] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.600179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.600686] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 0.601176] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 0.601681] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15) [ 0.602135] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.602652] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 14 15) [ 0.603127] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.603638] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.604156] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.604338] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.604514] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.604631] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.604810] vgaarb: loaded [ 0.604912] vgaarb: bridge control possible 0000:01:00.0 [ 0.605057] SCSI subsystem initialized [ 0.605251] libata version 3.00 loaded. [ 0.605257] ACPI: bus type USB registered [ 0.605372] usbcore: registered new interface driver usbfs [ 0.605482] usbcore: registered new interface driver hub [ 0.605639] usbcore: registered new device driver usb [ 0.605857] PCI: Using ACPI for IRQ routing [ 0.612116] PCI: pci_cache_line_size set to 64 bytes [ 0.612173] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] [ 0.612174] e820: reserve RAM buffer [mem 0xc7f90000-0xc7ffffff] [ 0.612256] NetLabel: Initializing [ 0.612359] NetLabel: domain hash size = 128 [ 0.612462] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.612603] NetLabel: unlabeled traffic allowed by default [ 0.612732] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.612955] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.615140] clocksource: Switched to clocksource hpet [ 0.619562] VFS: Disk quotas dquot_6.6.0 [ 0.619682] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.621734] pnp: PnP ACPI init [ 0.621944] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.622014] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.622308] pnp 00:02: [dma 0 disabled] [ 0.622358] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.622423] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.622527] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.622631] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.622769] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.622874] system 00:04: [io 0x040b] has been reserved [ 0.622978] system 00:04: [io 0x04d6] has been reserved [ 0.623082] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.623191] system 00:04: [io 0x0c14] has been reserved [ 0.623295] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.623400] system 00:04: [io 0x0c52] has been reserved [ 0.623503] system 00:04: [io 0x0c6c] has been reserved [ 0.623607] system 00:04: [io 0x0c6f] has been reserved [ 0.623711] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.623815] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.623919] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.624024] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.624128] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.624236] system 00:04: [io 0x0b00-0x0b3f] has been reserved [ 0.624340] system 00:04: [io 0x0800-0x089f] could not be reserved [ 0.624445] system 00:04: [io 0x0b00-0x0b1f] has been reserved [ 0.624549] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.624653] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.624757] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.624861] system 00:04: [io 0xfe00-0xfefe] has been reserved [ 0.624966] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.625071] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.625180] system 00:04: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.625285] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.625393] system 00:05: [io 0x0230-0x023f] has been reserved [ 0.625498] system 00:05: [io 0x0290-0x029f] has been reserved [ 0.625602] system 00:05: [io 0x0300-0x030f] has been reserved [ 0.625706] system 00:05: [io 0x0a30-0x0a3f] has been reserved [ 0.625811] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.625851] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.625956] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.626029] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.626134] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.626244] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.626349] system 00:07: [mem 0x00100000-0xc7ffffff] could not be reserved [ 0.626453] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.626558] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.626618] pnp: PnP ACPI: found 8 devices [ 0.631259] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.631461] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.631565] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.631670] pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.631775] pci 0000:00:02.0: bridge window [mem 0xcf800000-0xdfffffff 64bit pref] [ 0.631953] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.632057] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff] [ 0.632166] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.632272] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 0.632377] pci 0000:00:0a.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.632483] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.632588] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.632700] pci 0000:00:15.0: PCI bridge to [bus 05] [ 0.632804] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 0.632929] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.633097] pci 0000:00:15.1: PCI bridge to [bus 06] [ 0.633207] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 0.633316] pci 0000:00:15.1: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.633422] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.633605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.633606] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.633608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.633609] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.633611] pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff window] [ 0.633612] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.633614] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.633615] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.633617] pci_bus 0000:01: resource 2 [mem 0xcf800000-0xdfffffff 64bit pref] [ 0.633618] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] [ 0.633619] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.633621] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.633623] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.633624] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.633625] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.633627] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.633628] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.633630] pci_bus 0000:04: resource 8 [mem 0xc8000000-0xdfffffff window] [ 0.633631] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.633633] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.633634] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.633636] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.633641] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.633642] pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.633665] NET: Registered protocol family 2 [ 0.633925] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.634406] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.634758] TCP: Hash tables configured (established 131072 bind 65536) [ 0.634910] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.635095] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.635313] NET: Registered protocol family 1 [ 0.635577] RPC: Registered named UNIX socket transport module. [ 0.635685] RPC: Registered udp transport module. [ 0.635789] RPC: Registered tcp transport module. [ 0.635894] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.665481] pci 0000:01:00.0: Video device with shadowed ROM [ 1.670636] PCI: CLS 64 bytes, default 64 [ 1.670691] PCI-DMA: Disabling AGP. [ 1.670914] PCI-DMA: aperture base @ bc000000 size 65536 KB [ 1.671020] PCI-DMA: using GART IOMMU. [ 1.671125] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.675573] LVT offset 1 assigned for vector 0x400 [ 1.675701] IBS: LVT offset 1 assigned [ 1.675866] perf: AMD IBS detected (0x0000001f) [ 1.676384] Scanning for low memory corruption every 60 seconds [ 1.678807] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.678943] audit: initializing netlink subsys (disabled) [ 1.679062] audit: type=2000 audit(1461526383.363:1): initialized [ 1.681265] NFS: Registering the id_resolver key type [ 1.681379] Key type id_resolver registered [ 1.681487] Key type id_legacy registered [ 1.681708] SELinux: Registering netfilter hooks [ 1.684805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.684985] io scheduler noop registered (default) [ 1.685089] io scheduler deadline registered [ 1.685259] io scheduler cfq registered [ 1.685611] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 1.685713] crc32: self tests passed, processed 225944 bytes in 117822 nsec [ 1.685922] crc32c: CRC_LE_BITS = 64 [ 1.686023] crc32c: self tests passed, processed 225944 bytes in 52311 nsec [ 1.694645] crc32_combine: 8373 self tests passed [ 1.702828] crc32c_combine: 8373 self tests passed [ 1.703500] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.703606] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.703708] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 1.703812] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 1.703823] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 1.703930] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.704034] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 1.704138] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 1.704148] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt [ 1.704255] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.704359] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded [ 1.704373] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt [ 1.704477] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 1.704582] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded [ 1.704597] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt [ 1.704702] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 1.704807] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded [ 1.704871] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.725475] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.726002] Non-volatile memory driver v1.3 [ 1.726155] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.726340] ACPI: Power Button [PWRB] [ 1.726467] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.726645] ACPI: Power Button [PWRF] [ 1.726768] ACPI: processor limited to max C-state 1 [ 1.731028] brd: module loaded [ 1.732566] loop: module loaded [ 1.732721] ahci 0000:00:11.0: version 3.0 [ 1.732900] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.733082] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.733838] scsi host0: ahci [ 1.734067] scsi host1: ahci [ 1.734299] scsi host2: ahci [ 1.734556] scsi host3: ahci [ 1.734762] scsi host4: ahci [ 1.735010] scsi host5: ahci [ 1.735145] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 19 [ 1.735335] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 19 [ 1.735518] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 19 [ 1.735695] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 19 [ 1.735871] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 19 [ 1.736049] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 19 [ 1.736378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.736542] ehci-pci: EHCI PCI platform driver [ 1.736745] QUIRK: Enable AMD PLL fix [ 1.736760] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.736918] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.737097] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.737291] ehci-pci 0000:00:12.2: debug port 1 [ 1.737428] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800 [ 1.743253] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.743549] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.743657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.743836] usb usb1: Product: EHCI Host Controller [ 1.743949] usb usb1: Manufacturer: Linux 4.5.1-gentoo ehci_hcd [ 1.744053] usb usb1: SerialNumber: 0000:00:12.2 [ 1.744291] hub 1-0:1.0: USB hub found [ 1.744433] hub 1-0:1.0: 5 ports detected [ 1.744888] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.745047] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.745246] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.745430] ehci-pci 0000:00:13.2: debug port 1 [ 1.745552] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400 [ 1.751249] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.751394] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.751506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.751683] usb usb2: Product: EHCI Host Controller [ 1.751786] usb usb2: Manufacturer: Linux 4.5.1-gentoo ehci_hcd [ 1.751889] usb usb2: SerialNumber: 0000:00:13.2 [ 1.752091] hub 2-0:1.0: USB hub found [ 1.752213] hub 2-0:1.0: 5 ports detected [ 1.752477] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.752634] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.752811] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.752994] ehci-pci 0000:00:16.2: debug port 1 [ 1.753116] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000 [ 1.759245] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.759377] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.759481] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.759660] usb usb3: Product: EHCI Host Controller [ 1.759764] usb usb3: Manufacturer: Linux 4.5.1-gentoo ehci_hcd [ 1.759868] usb usb3: SerialNumber: 0000:00:16.2 [ 1.760065] hub 3-0:1.0: USB hub found [ 1.760185] hub 3-0:1.0: 4 ports detected [ 1.760370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.760478] ohci-pci: OHCI PCI platform driver [ 1.760666] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.760820] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.761014] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe6fe000 [ 1.815312] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.815418] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.815596] usb usb4: Product: OHCI PCI host controller [ 1.815700] usb usb4: Manufacturer: Linux 4.5.1-gentoo ohci_hcd [ 1.815803] usb usb4: SerialNumber: 0000:00:12.0 [ 1.816008] hub 4-0:1.0: USB hub found [ 1.816117] hub 4-0:1.0: 5 ports detected [ 1.816382] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.816538] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.816731] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fd000 [ 1.871315] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.871421] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.871599] usb usb5: Product: OHCI PCI host controller [ 1.871703] usb usb5: Manufacturer: Linux 4.5.1-gentoo ohci_hcd [ 1.871807] usb usb5: SerialNumber: 0000:00:13.0 [ 1.872007] hub 5-0:1.0: USB hub found [ 1.872116] hub 5-0:1.0: 5 ports detected [ 1.872383] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.872538] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.872732] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000 [ 1.927310] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.927416] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.927594] usb usb6: Product: OHCI PCI host controller [ 1.927698] usb usb6: Manufacturer: Linux 4.5.1-gentoo ohci_hcd [ 1.927802] usb usb6: SerialNumber: 0000:00:14.5 [ 1.928000] hub 6-0:1.0: USB hub found [ 1.928108] hub 6-0:1.0: 2 ports detected [ 1.928351] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.928511] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.928702] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f3000 [ 1.983332] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.983439] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.983618] usb usb7: Product: OHCI PCI host controller [ 1.983721] usb usb7: Manufacturer: Linux 4.5.1-gentoo ohci_hcd [ 1.983826] usb usb7: SerialNumber: 0000:00:16.0 [ 1.984029] hub 7-0:1.0: USB hub found [ 1.984138] hub 7-0:1.0: 4 ports detected [ 1.984326] uhci_hcd: USB Universal Host Controller Interface driver [ 1.984510] usbcore: registered new interface driver usb-storage [ 1.984635] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.985085] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.985224] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.985409] mousedev: PS/2 mouse device common for all mice [ 1.985688] rtc_cmos 00:01: RTC can wake from S4 [ 1.985891] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.986012] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.986245] device-mapper: uevent: version 1.0.3 [ 1.986429] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.986628] hidraw: raw HID events driver (C) Jiri Kosina [ 1.986853] usbcore: registered new interface driver usbhid [ 1.986957] usbhid: USB HID core driver [ 1.989214] Netfilter messages via NETLINK v0.30. [ 1.989333] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 1.989640] ctnetlink v0.93: registering with nfnetlink. [ 1.989943] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.990070] Initializing XFRM netlink socket [ 1.990315] NET: Registered protocol family 10 [ 1.990669] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.991059] sit: IPv6 over IPv4 tunneling driver [ 1.991280] NET: Registered protocol family 17 [ 1.991402] Key type dns_resolver registered [ 1.991754] microcode: CPU0: patch_level=0x010000bf [ 1.991862] microcode: CPU1: patch_level=0x010000bf [ 1.991982] microcode: CPU2: patch_level=0x010000bf [ 1.992104] microcode: CPU3: patch_level=0x010000bf [ 1.992235] microcode: CPU4: patch_level=0x010000bf [ 1.992354] microcode: CPU5: patch_level=0x010000bf [ 1.992500] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.992824] registered taskstats version 1 [ 1.993312] Btrfs loaded [ 1.993822] Magic number: 12:835:597 [ 1.993987] console [netcon0] enabled [ 1.994090] netconsole: network logging started [ 1.994250] rtc_cmos 00:01: setting system clock to 2016-04-24 19:33:04 UTC (1461526384) [ 1.994498] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.995133] PM: Hibernation image not present or could not be loaded. [ 2.040970] ata6: SATA link down (SStatus 0 SControl 300) [ 2.041132] ata5: SATA link down (SStatus 0 SControl 300) [ 2.041314] ata4: SATA link down (SStatus 0 SControl 300) [ 2.046295] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 2.161171] usb 1-3: New USB device found, idVendor=0424, idProduct=2504 [ 2.161323] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.162579] hub 1-3:1.0: USB hub found [ 2.162789] hub 1-3:1.0: 4 ports detected [ 2.194269] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.194413] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.194569] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.194768] ata1.00: supports DRM functions and may not be fully accessible [ 2.195039] ata1.00: READ LOG DMA EXT failed, trying unqueued [ 2.195214] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.195220] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133 [ 2.195340] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.195864] ata1.00: supports DRM functions and may not be fully accessible [ 2.196076] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.196208] ata1.00: configured for UDMA/133 [ 2.196736] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 2.198447] ata3.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL05, max UDMA/133 [ 2.201218] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 [ 2.201343] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.203763] ata3.00: configured for UDMA/133 [ 2.207955] ata2.00: configured for UDMA/133 [ 2.216670] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.216732] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.217172] sd 0:0:0:0: [sda] Write Protect is off [ 2.217243] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5 [ 2.217524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.217569] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.219533] sda: sda1 [ 2.219842] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.228602] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 2.228736] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.228941] sd 1:0:0:0: [sdb] Write Protect is off [ 2.229047] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.229060] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.238744] sdb: sdb1 sdb2 [ 2.239476] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.283310] usb 5-1: new full-speed USB device number 2 using ohci-pci [ 2.317892] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL05 PQ: 0 ANSI: 5 [ 2.438430] usb 5-1: New USB device found, idVendor=046d, idProduct=c24d [ 2.438558] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.438679] usb 5-1: Product: Logitech G710 Keyboard [ 2.438797] usb 5-1: Manufacturer: Logitech [ 2.447935] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.448141] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.448323] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:046D:C24D.0001/input/input5 [ 2.448616] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.448744] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 2.449040] md: Waiting for all devices to be available before autodetect [ 2.449166] md: If you don't use raid, use raid=noautodetect [ 2.493293] usb 4-4: new full-speed USB device number 2 using ohci-pci [ 2.499553] hid-generic 0003:046D:C24D.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:13.0-1/input0 [ 2.507852] input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:046D:C24D.0002/input/input6 [ 2.558654] hid-generic 0003:046D:C24D.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:00:13.0-1/input1 [ 2.559493] md: Autodetecting RAID arrays. [ 2.559617] md: Scanned 0 and added 0 devices. [ 2.559733] md: autorun ... [ 2.559848] md: ... autorun DONE. [ 2.571077] BTRFS: device label root devid 1 transid 698439 /dev/sda1 [ 2.571703] BTRFS info (device sda1): disk space caching is enabled [ 2.571827] BTRFS: has skinny extents [ 2.614523] BTRFS: detected SSD devices, enabling SSD mode [ 2.624332] VFS: Mounted root (btrfs filesystem) readonly on device 0:17. [ 2.625271] devtmpfs: mounted [ 2.628759] Freeing unused kernel memory: 1012K (ffffffff81d1e000 - ffffffff81e1b000) [ 2.628944] Write protecting the kernel read-only data: 12288k [ 2.629557] Freeing unused kernel memory: 572K (ffff880001771000 - ffff880001800000) [ 2.635980] Freeing unused kernel memory: 1632K (ffff880001a68000 - ffff880001c00000) [ 2.678253] tsc: Refined TSC clocksource calibration: 3314.618 MHz [ 2.678368] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fc73d0f080, max_idle_ns: 440795244439 ns [ 2.683364] usb 4-4: New USB device found, idVendor=0a12, idProduct=0001 [ 2.683480] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.685109] random: systemd urandom read with 32 bits of entropy available [ 2.688870] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 2.689428] systemd[1]: Detected architecture x86-64. [ 2.691012] systemd[1]: Set hostname to . [ 2.742263] usb 1-3.1: new full-speed USB device number 5 using ehci-pci [ 2.762060] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.762602] systemd[1]: Reached target Remote File Systems. [ 2.763651] systemd[1]: Listening on Process Core Dump Socket. [ 2.764114] systemd[1]: Listening on Journal Audit Socket. [ 2.764551] systemd[1]: Listening on udev Control Socket. [ 2.764982] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.765473] systemd[1]: Reached target Host and Network Name Lookups. [ 2.765887] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.766312] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.766732] systemd[1]: Listening on Journal Socket. [ 2.767160] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.767905] systemd[1]: Created slice User and Session Slice. [ 2.768354] systemd[1]: Listening on udev Kernel Socket. [ 2.768793] systemd[1]: Created slice System Slice. [ 2.775396] systemd[1]: Starting File System Check on Root Device... [ 2.776142] systemd[1]: Starting Setup Virtual Console... [ 2.776603] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 2.777175] systemd[1]: Mounting Temporary Directory... [ 2.778006] systemd[1]: Starting Journal Service... [ 2.779151] systemd[1]: Mounting POSIX Message Queue File System... [ 2.780245] systemd[1]: Mounting NFSD configuration filesystem... [ 2.781474] systemd[1]: Started Early root shell on /dev/tty9 FOR DEBUGGING ONLY. [ 2.782975] systemd[1]: Mounting Debug File System... [ 2.783418] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.783825] systemd[1]: Reached target Slices. [ 2.784647] systemd[1]: Mounting Huge Pages File System... [ 2.786380] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.789182] systemd[1]: Created slice system-getty.slice. [ 2.792456] systemd[1]: Starting Load Kernel Modules... [ 2.795084] systemd[1]: Mounted Debug File System. [ 2.795584] systemd[1]: Mounted POSIX Message Queue File System. [ 2.796061] systemd[1]: Mounted Huge Pages File System. [ 2.796576] systemd[1]: Mounted Temporary Directory. [ 2.797199] pata_via 0000:02:00.1: version 0.3.4 [ 2.797279] systemd[1]: Started File System Check on Root Device. [ 2.797736] scsi host6: pata_via [ 2.797846] scsi host7: pata_via [ 2.797884] ata7: PATA max UDMA/133 cmd 0xbc00 ctl 0xb480 bmdma 0xb000 irq 17 [ 2.797885] ata8: PATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xb008 irq 17 [ 2.798113] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.798756] systemd[1]: Mounted NFSD configuration filesystem. [ 2.799451] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.814984] systemd[1]: systemd-vconsole-setup.service: Main process exited, code=exited, status=1/FAILURE [ 2.815474] systemd[1]: Failed to start Setup Virtual Console. [ 2.816107] systemd[1]: systemd-vconsole-setup.service: Unit entered failed state. [ 2.816323] systemd[1]: systemd-vconsole-setup.service: Failed with result 'exit-code'. [ 2.831576] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.833372] systemd[1]: Started Journal Service. [ 2.835392] usb 1-3.1: New USB device found, idVendor=045e, idProduct=0745 [ 2.835501] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.835679] usb 1-3.1: Product: Microsoft® Nano Transceiver v2.0 [ 2.835784] usb 1-3.1: Manufacturer: Microsoft [ 2.836744] BTRFS info (device sda1): turning on discard [ 2.836880] BTRFS info (device sda1): enabling auto defrag [ 2.837003] BTRFS info (device sda1): use lzo compression [ 2.837127] BTRFS info (device sda1): disk space caching is enabled [ 2.840024] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1:1.0/0003:045E:0745.0003/input/input7 [ 2.876412] systemd-journald[181]: Received request to flush runtime journal from PID 1 [ 2.890513] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:12.2-3.1/input0 [ 2.897153] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1:1.1/0003:045E:0745.0004/input/input8 [ 2.912228] usb 4-5: new full-speed USB device number 3 using ohci-pci [ 2.948483] hid-generic 0003:045E:0745.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:12.2-3.1/input1 [ 2.965949] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1:1.2/0003:045E:0745.0005/input/input9 [ 2.978180] Linux agpgart interface v0.103 [ 2.989044] [drm] Initialized drm 1.1.0 20060810 [ 2.997634] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20160108/utaddress-255) [ 2.997992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.998441] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 2.998617] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 2.998649] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.998736] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 2.999201] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x41 [ 2.999553] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 2.999720] sp5100_tco: Last reboot was not triggered by watchdog. [ 2.999941] sp5100_tco: initialized (0xffffc9000000cb00). heartbeat=60 sec (nowayout=0) [ 3.011901] ata7.00: ATA-7: ST3320820A, 3.AAC, max UDMA/100 [ 3.012060] ata7.00: 625142448 sectors, multi 0: LBA48 [ 3.012495] ata7.01: ATA-7: Hitachi HDT725025VLAT80, V5DOA42A, max UDMA/133 [ 3.012651] ata7.01: 488397168 sectors, multi 0: LBA48 [ 3.012804] ata7.00: limited to UDMA/33 due to 40-wire cable [ 3.012979] ata7.01: limited to UDMA/33 due to 40-wire cable [ 3.013895] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 3.016455] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 3.016701] hid-generic 0003:045E:0745.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:12.2-3.1/input2 [ 3.016715] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 3.016774] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 3.016845] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 3.016889] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 3.017361] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 3.017363] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.017364] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.017365] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.017366] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 3.017366] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.017368] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 3.017369] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 3.017370] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 3.019565] [drm] radeon kernel modesetting enabled. [ 3.021332] AMD IOMMUv2 driver by Joerg Roedel [ 3.021450] AMD IOMMUv2 functionality not available on this system [ 3.022706] CRAT table not found [ 3.022826] Finished initializing topology ret=0 [ 3.023855] kfd kfd: Initialized module [ 3.024407] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.024958] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x665F 0x1043:0x0496). [ 3.025042] r8169 0000:06:00.0 eth0: RTL8168e/8111e at 0xffffc90001f90000, e0:cb:4e:ce:7d:07, XID 0c100000 IRQ 30 [ 3.025044] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.025572] [drm] register mmio base: 0xFE7C0000 [ 3.025691] [drm] register mmio size: 262144 [ 3.025810] [drm] doorbell mmio base: 0xCF800000 [ 3.025931] [drm] doorbell mmio size: 8388608 [ 3.026969] ATOM BIOS: 665FHB.15.49.0.8.AS01 [ 3.027175] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 3.027421] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF [ 3.027645] [drm] Detected VRAM RAM=2048M, BAR=256M [ 3.027780] [drm] RAM width 128bits DDR [ 3.028615] [TTM] Zone kernel: Available graphics memory: 6152910 kiB [ 3.028769] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.028915] [TTM] Initializing pool allocator [ 3.029072] [TTM] Initializing DMA pool allocator [ 3.029379] [drm] radeon: 2048M of VRAM memory ready [ 3.029501] [drm] radeon: 2048M of GTT memory ready. [ 3.029642] [drm] Loading bonaire Microcode [ 3.038431] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 3.038702] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 3.038975] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 3.039253] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 3.039540] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 3.039794] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 3.040050] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 3.040310] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 3.041076] [drm] Internal thermal controller with fan control [ 3.041327] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0 [ 3.043696] rtl8192ce:_rtl92ce_read_chip_version():<0-0> Chip Version ID: B_CHIP_92C [ 3.043769] kvm: Nested Virtualization enabled [ 3.044045] kvm: Nested Paging enabled [ 3.048282] firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 3.049642] [drm] radeon: dpm initialized [ 3.056282] rtl8192ce: rtl8192ce: Power Save off (module option) [ 3.056442] rtl8192ce: rtl8192ce: FW Power Save off (module option) [ 3.056600] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin [ 3.056956] rtlwifi:_rtl_init_hw_ht_capab():<0-0> 1T2R or 2T2R [ 3.056958] rtlwifi:rtl_regd_init():<0-0> rtl: EEPROM regdomain: 0xb conuntry code: 14 [ 3.056960] rtlwifi:rtl_regd_init():<0-0> rtl: EEPROM indicates invalid contry code, world wide 13 should be used [ 3.058291] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 3.058492] rtlwifi: rtlwifi: wireless switch is on [ 3.058649] rtl_pci:rtl_pci_intr_mode_legacy():<0-0> Pin-based Interrupt Mode! [ 3.058978] [drm] Found VCE firmware/feedback version 40.2.2 / 15! [ 3.059140] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 3.061801] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0 [ 3.061964] [drm] PCIE gen 2 link speeds already enabled [ 3.067349] usb 4-5: New USB device found, idVendor=046d, idProduct=c52f [ 3.067508] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.067663] usb 4-5: Product: USB Receiver [ 3.067814] usb 4-5: Manufacturer: Logitech [ 3.069079] [drm] PCIE GART of 2048M enabled (table at 0x0000000000324000). [ 3.069380] radeon 0000:01:00.0: WB enabled [ 3.069386] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88032253ac00 [ 3.069387] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88032253ac04 [ 3.069389] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88032253ac08 [ 3.069390] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88032253ac0c [ 3.069391] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88032253ac10 [ 3.069821] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90003c36c98 [ 3.070005] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff88032253ac18 [ 3.070007] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff88032253ac1c [ 3.070008] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.070009] [drm] Driver supports precise vblank timestamp query. [ 3.070046] radeon 0000:01:00.0: radeon: using MSI. [ 3.070092] [drm] radeon: irq initialized. [ 3.071979] [drm] ring test on 0 succeeded in 3 usecs [ 3.072070] [drm] ring test on 1 succeeded in 2 usecs [ 3.072091] [drm] ring test on 2 succeeded in 1 usecs [ 3.073072] [drm] ring test on 3 succeeded in 3 usecs [ 3.073079] [drm] ring test on 4 succeeded in 4 usecs [ 3.075629] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:046D:C52F.0006/input/input24 [ 3.075987] hid-generic 0003:046D:C52F.0006: input,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-5/input0 [ 3.083428] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/0003:046D:C52F.0007/input/input25 [ 3.086702] ata7.00: configured for UDMA/33 [ 3.092248] ata7.01: configured for UDMA/33 [ 3.093533] scsi 6:0:0:0: Direct-Access ATA ST3320820A C PQ: 0 ANSI: 5 [ 3.096154] r8169 0000:06:00.0 enp6s0: renamed from eth0 [ 3.099137] [drm] ring test on 5 succeeded in 1 usecs [ 3.101410] sd 6:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.101428] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.101863] sd 6:0:0:0: [sdc] Write Protect is off [ 3.102023] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.102039] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.113497] rtl8192ce 0000:05:00.0 wlp5s0: renamed from wlan0 [ 3.119685] [drm] UVD initialized successfully. [ 3.119962] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 3.120327] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.120445] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.120647] usb usb8: Product: xHCI Host Controller [ 3.120753] usb usb8: Manufacturer: Linux 4.5.1-gentoo xhci-hcd [ 3.120865] usb usb8: SerialNumber: 0000:03:00.0 [ 3.121548] hub 8-0:1.0: USB hub found [ 3.121793] hub 8-0:1.0: 2 ports detected [ 3.121993] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 3.122590] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 3.123325] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.123531] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.123642] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.123836] usb usb9: Product: xHCI Host Controller [ 3.123947] usb usb9: Manufacturer: Linux 4.5.1-gentoo xhci-hcd [ 3.124200] usb usb9: SerialNumber: 0000:03:00.0 [ 3.124454] hub 9-0:1.0: USB hub found [ 3.124583] hub 9-0:1.0: 2 ports detected [ 3.134954] scsi 6:0:1:0: Direct-Access ATA Hitachi HDT72502 A42A PQ: 0 ANSI: 5 [ 3.135517] hid-generic 0003:046D:C52F.0007: input,hiddev0,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input1 [ 3.162552] Bluetooth: Core ver 2.21 [ 3.162679] NET: Registered protocol family 31 [ 3.162785] Bluetooth: HCI device and connection manager initialized [ 3.162895] Bluetooth: HCI socket layer initialized [ 3.163003] Bluetooth: L2CAP socket layer initialized [ 3.163116] Bluetooth: SCO socket layer initialized [ 3.163479] sd 6:0:1:0: Attached scsi generic sg4 type 0 [ 3.166302] sd 6:0:1:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 3.166589] usbcore: registered new interface driver btusb [ 3.166835] sdc: sdc1 [ 3.166878] sd 6:0:1:0: [sdd] Write Protect is off [ 3.166880] sd 6:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.166899] sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.192592] random: nonblocking pool is initialized [ 3.193835] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.229923] [drm] ring test on 6 succeeded in 19 usecs [ 3.230040] [drm] ring test on 7 succeeded in 4 usecs [ 3.230144] [drm] VCE initialized successfully. [ 3.231834] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.235429] sdd: sdd1 [ 3.236459] sd 6:0:1:0: [sdd] Attached SCSI disk [ 3.317187] usbcore: registered new interface driver usbserial [ 3.317398] usbcore: registered new interface driver usbserial_generic [ 3.317561] usbserial: USB Serial support registered for generic [ 3.318755] usbcore: registered new interface driver pl2303 [ 3.318910] usbserial: USB Serial support registered for pl2303 [ 3.319488] usb 1-1: new high-speed USB device number 6 using ehci-pci [ 3.444187] usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd [ 3.549554] firewire_core 0000:02:00.0: created device fw0: GUID 001e8c000031dd66, S400 [ 3.554790] usb 9-1: New USB device found, idVendor=11b0, idProduct=6348 [ 3.554919] usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.555041] usb 9-1: Product: USB3.0 Media Reader [ 3.555159] usb 9-1: Manufacturer: Kingston [ 3.555326] usb 9-1: SerialNumber: 08735324909138 [ 3.562378] usb-storage 9-1:1.0: USB Mass Storage device detected [ 3.562682] scsi host8: usb-storage 9-1:1.0 [ 3.611519] Adding 3229060k swap on /dev/sdb2. Priority:-1 extents:1 across:3229060k FS [ 3.678472] clocksource: Switched to clocksource tsc [ 3.700368] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl [ 3.718371] BTRFS error (device sda1): could not find root 8 [ 3.718497] BTRFS error (device sda1): could not find root 8 [ 3.733299] [drm] ib test on ring 1 succeeded in 0 usecs [ 3.779479] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.779486] Bluetooth: BNEP socket layer initialized [ 3.924269] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 3.924281] NFSD: starting 90-second grace period (net ffffffff81cdf780) [ 3.936150] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready [ 4.123027] r8169 0000:06:00.0 enp6s0: link down [ 4.123029] r8169 0000:06:00.0 enp6s0: link down [ 4.123088] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready [ 4.125286] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready [ 4.234301] [drm] ib test on ring 2 succeeded in 0 usecs [ 4.234372] [drm] ib test on ring 3 succeeded in 0 usecs [ 4.234428] [drm] ib test on ring 4 succeeded in 0 usecs [ 4.580213] scsi 8:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 6 [ 4.580612] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 4.598176] scsi 8:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 6 [ 4.598426] sd 8:0:0:1: Attached scsi generic sg6 type 0 [ 4.619365] scsi 8:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 6 [ 4.619779] sd 8:0:0:2: Attached scsi generic sg7 type 0 [ 4.643377] scsi 8:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 6 [ 4.643787] sd 8:0:0:3: Attached scsi generic sg8 type 0 [ 4.696538] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 4.708432] sd 8:0:0:1: [sdf] Attached SCSI removable disk [ 4.717583] sd 8:0:0:2: [sdg] Attached SCSI removable disk [ 4.724198] sd 8:0:0:3: [sdh] Attached SCSI removable disk [ 4.755395] [drm] ib test on ring 5 succeeded [ 4.776259] [drm] ib test on ring 6 succeeded [ 4.776936] [drm] ib test on ring 7 succeeded [ 4.777779] [drm] Radeon Display Connectors [ 4.777784] [drm] Connector 0: [ 4.777786] [drm] DP-1 [ 4.777788] [drm] HPD2 [ 4.777791] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 4.777793] [drm] Encoders: [ 4.777795] [drm] DFP1: INTERNAL_UNIPHY2 [ 4.777796] [drm] Connector 1: [ 4.777798] [drm] HDMI-A-1 [ 4.777800] [drm] HPD3 [ 4.777802] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 4.777804] [drm] Encoders: [ 4.777805] [drm] DFP2: INTERNAL_UNIPHY2 [ 4.777807] [drm] Connector 2: [ 4.777808] [drm] DVI-I-1 [ 4.777810] [drm] HPD6 [ 4.777812] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 4.777814] [drm] Encoders: [ 4.777815] [drm] DFP3: INTERNAL_UNIPHY [ 4.777817] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.777818] [drm] Connector 3: [ 4.777820] [drm] DVI-D-1 [ 4.777821] [drm] HPD1 [ 4.777824] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 4.777825] [drm] Encoders: [ 4.777827] [drm] DFP4: INTERNAL_UNIPHY1 [ 4.832319] [drm] fb mappable at 0xD0727000 [ 4.832322] [drm] vram apper at 0xD0000000 [ 4.832323] [drm] size 7680000 [ 4.832324] [drm] fb depth is 24 [ 4.832325] [drm] pitch is 6400 [ 4.832406] fbcon: radeondrmfb (fb0) is primary device [ 4.832685] Console: switching to colour frame buffer device 200x75 [ 4.832691] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 4.840837] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0 [ 4.850240] [drm] amdgpu kernel modesetting enabled. [ 6.042937] fuse init (API version 7.24) [ 6.421317] r8169 0000:06:00.0 enp6s0: link up [ 6.421331] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready