[ 0.000000] Linux version 4.6.0-rc5-ARCH-00580-gf814551 (zsx@touchsmart-arch) (gcc version 5.3.0 (GCC) ) #14 SMP PREEMPT Mon Apr 25 23:50:04 EDT 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-rc5 root=/dev/sda2 init=/usr/lib/systemd/systemd rw drm.debug=14 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000387f3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000387f4000-0x00000000387f9fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000387fa000-0x0000000038afffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000038b00000-0x000000003bb7ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003bb80000-0x000000003bc75fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003bc76000-0x000000003bcc5fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000003bcc6000-0x000000003bcedfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003bcee000-0x000000003bd5dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003bd5e000-0x000000003bd9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003bd9e000-0x000000003bda9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003bdaa000-0x000000003bdaafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003bdab000-0x000000003bdacfff] usable [ 0.000000] BIOS-e820: [mem 0x000000003bdad000-0x000000003bdadfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003bdae000-0x000000003c7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd. [ 0.000000] efi: ACPI=0x3bd9d000 ACPI 2.0=0x3bd9d014 SMBIOS=0x3bcd4000 ESRT=0x3bba9000 [ 0.000000] esrt: Reserving ESRT space from 0x000000003bba9000 to 0x000000003bba9038. [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: WinBook TW700/TW700, BIOS 1.00 IA32 11/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3c800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF60000 mask FFFF60000 write-protect [ 0.000000] 1 base 000000000 mask FC0000000 write-back [ 0.000000] 2 base 03E000000 mask FFE000000 uncachable [ 0.000000] 3 base 03D000000 mask FFF000000 uncachable [ 0.000000] 4 base 03CE00000 mask FFFE00000 uncachable [ 0.000000] 5 base 03C800000 mask FFFC00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE [ 0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE [ 0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE [ 0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE [ 0.000000] BRK [0x01b53000, 0x01b53fff] PGTABLE [ 0.000000] BRK [0x01b54000, 0x01b54fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37960000-0x37ca7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000003BD9D014 000024 (v02 MEI ) [ 0.000000] ACPI: XSDT 0x000000003BD9D170 0000E4 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 0x000000003BD98000 00010C (v05 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x000000003BD84000 00FC40 (v02 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x000000003BD9C000 0000B1 (v01 MEI ADebTabl 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x000000003BD9B000 000042 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: OEM0 0x000000003BD9A000 000084 (v05 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: DBG2 0x000000003BD99000 000072 (v00 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: HPET 0x000000003BD97000 000038 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: LPIT 0x000000003BD96000 000104 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: APIC 0x000000003BD95000 00006C (v03 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: MCFG 0x000000003BD94000 00003C (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x000000003BD83000 00063D (v01 INTEL CpuDptf 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x000000003BD80000 002330 (v01 INTEL DptfTab 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x000000003BD7F000 000058 (v01 INTEL LowPwrM 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x000000003BD7E000 0000FF (v01 INTEL SoCDptf 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x000000003BD7D000 000763 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x000000003BD7C000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x000000003BD7B000 00017A (v01 PmRef ApTst 00003000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x000000003BD7A000 000042 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x000000003BD19000 000055 (v03 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: BATB 0x000000003BD79000 000046 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x000000003BD78000 000054 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x000000003BD77000 000076 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: BGRT 0x000000003BD76000 000038 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: CSRT 0x000000003BD75000 00014C (v00 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: WDAT 0x000000003BD74000 000104 (v01 MEI MEI_PSWb 00000002 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003c7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x3bb7b000-0x3bb7efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000003c7fffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x00000000387f3fff] [ 0.000000] node 0: [mem 0x0000000038b00000-0x000000003bb7ffff] [ 0.000000] node 0: [mem 0x000000003bd9e000-0x000000003bda9fff] [ 0.000000] node 0: [mem 0x000000003bdab000-0x000000003bdacfff] [ 0.000000] node 0: [mem 0x000000003bdae000-0x000000003c7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003c7fffff] [ 0.000000] On node 0 totalpages: 245874 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3808 pages used for memmap [ 0.000000] DMA32 zone: 241876 pages, LIFO batch:31 [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics stolen memory at 0x3d000000-0x3effffff [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x387f4000-0x387f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x387fa000-0x38afffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bb80000-0x3bc75fff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bc76000-0x3bcc5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bcc6000-0x3bcedfff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bcee000-0x3bd5dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bd5e000-0x3bd9dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bdaa000-0x3bdaafff] [ 0.000000] PM: Registered nosave memory: [mem 0x3bdad000-0x3bdadfff] [ 0.000000] e820: [mem 0x3f000000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88003b400000 s93464 r8192 d29416 u524288 [ 0.000000] pcpu-alloc: s93464 r8192 d29416 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 241979 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-rc5 root=/dev/sda2 init=/usr/lib/systemd/systemd rw drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 902032K/983496K available (5898K kernel code, 972K rwdata, 1796K rodata, 1224K init, 1152K bss, 81464K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:8448 nr_irqs:1024 0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Maximum core-clock to bus-clock ratio: 0x10 [ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz [ 0.000000] TSC runs at 1331200 KHz [ 0.000000] lapic_timer_frequency = 277333 [ 0.000000] tsc: Detected 1331.200 MHz processor [ 0.000059] Calibrating delay loop (skipped), value calculated using timer frequency.. 2663.33 BogoMIPS (lpj=4437333) [ 0.000085] pid_max: default: 32768 minimum: 301 [ 0.000113] ACPI: Core revision 20160108 [ 0.052095] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.054386] Security Framework initialized [ 0.054408] Yama: becoming mindful. [ 0.054644] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.055369] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.055713] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.055735] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.056308] CPU: Physical Processor ID: 0 [ 0.056326] CPU: Processor Core ID: 0 [ 0.056342] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.056355] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.056377] mce: CPU supports 6 MCE banks [ 0.056401] CPU0: Thermal monitoring enabled (TM1) [ 0.056417] process: using mwait in idle threads [ 0.056435] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.056448] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.056959] Freeing SMP alternatives memory: 24K (ffffffff81a27000 - ffffffff81a2d000) [ 0.064077] ftrace: allocating 23476 entries in 92 pages [ 0.083857] smpboot: Max logical packages: 1 [ 0.083876] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.083952] TSC deadline timer enabled [ 0.083959] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735G @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8) [ 0.084006] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.084048] ... version: 3 [ 0.084059] ... bit width: 40 [ 0.084070] ... generic registers: 2 [ 0.084081] ... value mask: 000000ffffffffff [ 0.084092] ... max period: 000000ffffffffff [ 0.084104] ... fixed-purpose events: 3 [ 0.084115] ... event mask: 0000000700000003 [ 0.085645] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.086038] x86: Booting SMP configuration: [ 0.086053] .... node #0, CPUs: #1 #2 #3 [ 0.336443] x86: Booted up 1 node, 4 CPUs [ 0.336465] smpboot: Total of 4 processors activated (10660.67 BogoMIPS) [ 0.337743] devtmpfs: initialized [ 0.337936] x86/mm: Memory block size: 128MB [ 0.347040] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.347062] PM: Registering ACPI NVS region [mem 0x3bcee000-0x3bd5dfff] (458752 bytes) [ 0.347317] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.347494] pinctrl core: initialized pinctrl subsystem [ 0.347623] RTC time: 0:48:25, date: 01/01/10 [ 0.348010] NET: Registered protocol family 16 [ 0.360945] cpuidle: using governor ladder [ 0.374293] cpuidle: using governor menu [ 0.374401] ACPI: bus type PCI registered [ 0.374415] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.374609] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.374632] PCI: not using MMCONFIG [ 0.374643] PCI: Using configuration type 1 for base access [ 0.388080] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.388840] ACPI: Added _OSI(Module Device) [ 0.388855] ACPI: Added _OSI(Processor Device) [ 0.388867] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.388879] ACPI: Added _OSI(Processor Aggregator Device) [ 0.414596] ACPI: Dynamic OEM Table Load: [ 0.414633] ACPI: SSDT 0xFFFF88003C0F9800 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.416773] ACPI: Dynamic OEM Table Load: [ 0.416803] ACPI: SSDT 0xFFFF88003C0FA000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.419573] ACPI: Dynamic OEM Table Load: [ 0.419602] ACPI: SSDT 0xFFFF88003C247600 00015F (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.421682] ACPI: Dynamic OEM Table Load: [ 0.421709] ACPI: SSDT 0xFFFF88003C2C00C0 00008D (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.426152] ACPI: Interpreter enabled [ 0.426203] ACPI: (supports S0 S5) [ 0.426216] ACPI: Using IOAPIC for interrupt routing [ 0.426313] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.434096] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources [ 0.434120] PCI: not using MMCONFIG [ 0.434137] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.437343] ACPI: Power Resource [USBC] (on) [ 0.438235] ACPI: Power Resource [WWPR] (off) [ 0.445903] ACPI: Power Resource [PLPE] (on) [ 0.457988] ACPI: Power Resource [CLK0] (on) [ 0.458134] ACPI: Power Resource [CLK1] (on) [ 0.458921] ACPI: Power Resource [P28P] (off) [ 0.459055] ACPI: Power Resource [P18P] (off) [ 0.469453] ACPI: Power Resource [P28X] (off) [ 0.469596] ACPI: Power Resource [P18X] (off) [ 0.469758] ACPI: Power Resource [P28T] (off) [ 0.469912] ACPI: Power Resource [P18T] (off) [ 0.470051] ACPI: Power Resource [P1XT] (off) [ 0.480005] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.480032] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.480173] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID [ 0.480179] _OSC request data: 1 1e 0 [ 0.480191] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.480233] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.480979] PCI host bridge to bus 0000:00 [ 0.480997] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.481013] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.481029] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.481044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.481060] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.481080] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.481100] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.481120] pci_bus 0000:00: root bus resource [mem 0x50c00000-0x50ffffff window] [ 0.481140] pci_bus 0000:00: root bus resource [mem 0x3d000001-0x3f000000 window] [ 0.481160] pci_bus 0000:00: root bus resource [mem 0x40000000-0x508ffffe window] [ 0.481179] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window] [ 0.481200] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.481227] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.481441] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.481463] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x503fffff] [ 0.481480] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref] [ 0.481497] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007] [ 0.481722] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.481749] pci 0000:00:14.0: reg 0x10: [mem 0x50800000-0x5080ffff 64bit] [ 0.481830] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.482027] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.482059] pci 0000:00:1a.0: reg 0x10: [mem 0x50700000-0x507fffff] [ 0.482078] pci 0000:00:1a.0: reg 0x14: [mem 0x50600000-0x506fffff] [ 0.482205] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.482395] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.483669] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.483898] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.484132] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.484355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.484578] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.484801] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.485022] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.485245] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.499528] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.499548] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.499569] vgaarb: loaded [ 0.499580] vgaarb: bridge control possible 0000:00:02.0 [ 0.606875] i2c_designware 80860F41:04: I2C bus managed by PUNIT [ 0.607229] PCI: Using ACPI for IRQ routing [ 0.607246] PCI: pci_cache_line_size set to 64 bytes [ 0.607275] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.607291] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.607296] e820: reserve RAM buffer [mem 0x387f4000-0x3bffffff] [ 0.607302] e820: reserve RAM buffer [mem 0x3bb80000-0x3bffffff] [ 0.607307] e820: reserve RAM buffer [mem 0x3bdaa000-0x3bffffff] [ 0.607312] e820: reserve RAM buffer [mem 0x3bdad000-0x3bffffff] [ 0.607316] e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff] [ 0.607632] NetLabel: Initializing [ 0.607645] NetLabel: domain hash size = 128 [ 0.607656] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.607693] NetLabel: unlabeled traffic allowed by default [ 0.607883] clocksource: Switched to clocksource refined-jiffies [ 0.623842] VFS: Disk quotas dquot_6.6.0 [ 0.623902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.624216] pnp: PnP ACPI init [ 0.624384] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.624571] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.624590] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.624605] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.624621] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.624636] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.624656] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.624947] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.629590] pnp: PnP ACPI: found 3 devices [ 0.635432] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.635441] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.635448] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.635453] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.635459] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.635465] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.635470] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.635476] pci_bus 0000:00: resource 11 [mem 0x50c00000-0x50ffffff window] [ 0.635482] pci_bus 0000:00: resource 12 [mem 0x3d000001-0x3f000000 window] [ 0.635487] pci_bus 0000:00: resource 13 [mem 0x40000000-0x508ffffe window] [ 0.635493] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window] [ 0.635571] NET: Registered protocol family 2 [ 0.635993] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.636068] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.636140] TCP: Hash tables configured (established 8192 bind 8192) [ 0.636225] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.636259] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.636391] NET: Registered protocol family 1 [ 0.636447] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.636871] PCI: CLS 0 bytes, default 64 [ 0.637004] Unpacking initramfs... [ 0.780231] Freeing initrd memory: 3360K (ffff880037960000 - ffff880037ca8000) [ 0.780599] Scanning for low memory corruption every 60 seconds [ 0.781567] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.782508] Initialise system trusted keyring [ 0.782789] workingset: timestamp_bits=38 max_order=18 bucket_order=0 [ 0.788010] zbud: loaded [ 0.788681] Key type big_key registered [ 0.789401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.789515] io scheduler noop registered [ 0.789533] io scheduler deadline registered [ 0.789652] io scheduler cfq registered (default) [ 0.789896] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.789929] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.790008] efifb: probing for efifb [ 0.790058] efifb: framebuffer at 0x40000000, mapped to 0xffffc90000400000, using 4032k, total 4032k [ 0.790079] efifb: mode is 800x1280x32, linelength=3200, pages=1 [ 0.790091] efifb: scrolling: redraw [ 0.790104] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.800340] Console: switching to colour frame buffer device 100x80 [ 0.810383] fb0: EFI VGA frame buffer device [ 0.810482] intel_idle: MWAIT substates: 0x33000020 [ 0.810487] intel_idle: v0.4.1 model 0x37 [ 0.810931] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.811040] GHES: HEST is not enabled! [ 0.811258] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.831661] 00:02: ttyS0 at I/O 0x3f8 (irq = 200, base_baud = 115200) is a 16550A [ 0.832720] hpet: number irqs doesn't agree with number of timers [ 0.832886] Linux agpgart interface v0.103 [ 0.833791] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20160108/evxface-654) [ 0.834163] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.834307] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram [ 0.834461] Intel P-state driver initializing. [ 0.885418] ledtrig-cpu: registered to indicate activity on CPUs [ 0.886494] NET: Registered protocol family 10 [ 0.887166] NET: Registered protocol family 17 [ 0.887817] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x821 [ 0.887914] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x821 [ 0.888026] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x821 [ 0.888408] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x821 [ 0.888824] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.889461] registered taskstats version 1 [ 0.889552] Loading compiled-in X.509 certificates [ 0.889664] zswap: loaded using pool lzo/zbud [ 0.902396] i2c_designware 80860F41:04: I2C bus managed by PUNIT [ 0.927838] Magic number: 10:824:808 [ 0.928017] acpi INT33FE:00: hash matches [ 0.928632] rtc_cmos 00:00: setting system clock to 2010-01-01 00:48:26 UTC (1262306906) [ 0.929259] PM: Hibernation image not present or could not be loaded. [ 0.933184] Freeing unused kernel memory: 1224K (ffffffff818f5000 - ffffffff81a27000) [ 0.933306] Write protecting the kernel read-only data: 8192k [ 0.933836] Freeing unused kernel memory: 228K (ffff8800015c7000 - ffff880001600000) [ 0.935637] Freeing unused kernel memory: 252K (ffff8800017c1000 - ffff880001800000) [ 0.961552] random: systemd-tmpfile urandom read with 0 bits of entropy available [ 1.067405] sdhci: Secure Digital Host Controller Interface driver [ 1.067511] sdhci: Copyright(c) Pierre Ossman [ 1.088383] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 1.093063] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA [ 1.108840] ACPI: bus type USB registered [ 1.108974] usbcore: registered new interface driver usbfs [ 1.109079] usbcore: registered new interface driver hub [ 1.109229] usbcore: registered new device driver usb [ 1.116343] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.116441] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.117691] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.117829] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.118047] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA [ 1.118435] hub 1-0:1.0: USB hub found [ 1.118522] hub 1-0:1.0: 6 ports detected [ 1.195029] mmc1: new high speed SDIO card at address 0001 [ 1.214802] mmc2: new high speed SDXC card at address e624 [ 1.215454] mmcblk2: mmc2:e624 SU64G 59.5 GiB [ 1.216650] mmcblk2: p1 [ 1.270881] mmc0: new HS200 MMC card at address 0001 [ 1.272062] mmcblk0: mmc0:0001 S10016 14.6 GiB [ 1.272808] mmcblk0boot0: mmc0:0001 S10016 partition 1 4.00 MiB [ 1.287646] mmcblk0boot1: mmc0:0001 S10016 partition 2 4.00 MiB [ 1.299955] mmcblk0rpmb: mmc0:0001 S10016 partition 3 4.00 MiB [ 1.309079] mmcblk0: p1 p2 p3 p4 [ 1.662564] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.676427] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.685126] hub 2-0:1.0: USB hub found [ 1.691989] hub 2-0:1.0: 1 port detected [ 1.833369] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13303f810e3, max_idle_ns: 440795235405 ns [ 1.861847] clocksource: Switched to clocksource tsc [ 2.029366] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.219658] hub 1-1:1.0: USB hub found [ 2.234206] hub 1-1:1.0: 5 ports detected [ 2.526033] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd [ 2.719366] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd [ 2.857020] SCSI subsystem initialized [ 2.874896] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 2.886394] scsi host0: usb-storage 1-1.2:1.0 [ 2.899517] usbcore: registered new interface driver usb-storage [ 2.909733] usbcore: registered new interface driver uas [ 2.939405] usb 1-1.3: new full-speed USB device number 5 using xhci_hcd [ 3.072888] hidraw: raw HID events driver (C) Jiri Kosina [ 3.107267] usbcore: registered new interface driver usbhid [ 3.117566] usbhid: USB HID core driver [ 3.130769] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0745.0001/input/input0 [ 3.209851] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1.3/input0 [ 3.239144] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:045E:0745.0002/input/input1 [ 3.306366] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1.3/input1 [ 3.351197] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:045E:0745.0003/input/input2 [ 3.433744] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:14.0-1.3/input2 [ 3.519307] clocksource: timekeeping watchdog on CPU2: Marking clocksource 'tsc' as unstable because the skew is too large: [ 3.550607] clocksource: 'refined-jiffies' wd_now: fffea43a wd_last: fffea3a4 mask: ffffffff [ 3.582866] clocksource: 'tsc' cs_now: c631c51f0 cs_last: c30a48c10 mask: ffffffffffffffff [ 3.617522] clocksource: Switched to clocksource refined-jiffies [ 3.763209] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 3.789321] sd 0:0:0:0: [sda] 7888896 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 3.799532] sd 0:0:0:0: [sda] Write Protect is off [ 3.815975] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 3.816350] sd 0:0:0:0: [sda] No Caching mode page found [ 3.824629] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.843439] sda: sda1 sda2 [ 3.853812] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.210415] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.487749] random: nonblocking pool is initialized [ 4.592145] systemd[1]: System time before build time, advancing clock. [ 4.701257] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.791510] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.813639] systemd[1]: Detected architecture x86-64. [ 4.852256] systemd[1]: Set hostname to . [ 5.230927] systemd[1]: Reached target Encrypted Volumes. [ 5.251113] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.264992] systemd[1]: Listening on Process Core Dump Socket. [ 5.275534] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.313514] systemd[1]: Listening on Journal Socket. [ 5.326908] systemd[1]: Reached target Remote File Systems. [ 5.339400] systemd[1]: Created slice System Slice. [ 5.357916] systemd[1]: Mounting POSIX Message Queue File System... [ 5.373665] systemd[1]: Mounting Huge Pages File System... [ 5.386655] systemd[1]: Starting Setup Virtual Console... [ 5.399722] systemd[1]: Starting Journal Service... [ 5.415548] systemd[1]: Mounting Temporary Directory... [ 5.427136] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.440378] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.458615] systemd[1]: Created slice system-getty.slice. [ 5.470793] systemd[1]: Listening on udev Control Socket. [ 5.483058] systemd[1]: Listening on udev Kernel Socket. [ 5.510869] systemd[1]: Mounting Configuration File System... [ 5.526662] systemd[1]: Starting Apply Kernel Variables... [ 5.538845] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.551191] systemd[1]: Created slice User and Session Slice. [ 5.562948] systemd[1]: Reached target Slices. [ 5.574465] systemd[1]: Reached target Swap. [ 5.585920] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.601554] systemd[1]: Mounting Debug File System... [ 5.612611] systemd[1]: Reached target Paths. [ 5.624945] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.640041] systemd[1]: Mounted POSIX Message Queue File System. [ 5.651051] systemd[1]: Mounted Huge Pages File System. [ 5.662067] systemd[1]: Mounted Debug File System. [ 5.673056] systemd[1]: Mounted Configuration File System. [ 5.684071] systemd[1]: Mounted Temporary Directory. [ 5.695988] systemd[1]: Started Setup Virtual Console. [ 5.707769] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.725107] systemd[1]: Started Apply Kernel Variables. [ 5.736993] systemd[1]: Started Remount Root and Kernel File Systems. [ 5.806404] systemd[1]: Starting udev Coldplug all Devices... [ 5.818852] systemd[1]: Starting Load/Save Random Seed... [ 5.831733] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.846222] systemd[1]: Started Load/Save Random Seed. [ 5.910227] systemd[1]: Started Create Static Device Nodes in /dev. [ 5.924757] systemd[1]: Reached target Local File Systems (Pre). [ 5.935963] systemd[1]: Reached target Local File Systems. [ 5.953697] systemd[1]: Starting udev Kernel Device Manager... [ 5.966246] systemd[1]: Started Journal Service. [ 6.033654] systemd-journald[177]: Received request to flush runtime journal from PID 1 [ 7.235775] ACPI: Battery Slot [BMBT] (battery present) [ 7.271846] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input3 [ 7.286312] [drm] Initialized drm 1.1.0 20060810 [ 7.286333] ACPI: Lid Switch [LID] [ 7.297373] 80860F0A:00: ttyS1 at MMIO 0x50947000 (irq = 191, base_baud = 2764800) is a 16550A [ 7.311250] 80860F0A:01: ttyS2 at MMIO 0x5094d000 (irq = 192, base_baud = 2764800) is a 16550A [ 7.350257] ACPI: AC Adapter [ADP1] (off-line) [ 7.400246] mei_txe 0000:00:1a.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1 [ 7.452480] Goodix-TS i2c-GDIX1001:00: ID 911, version: 1050 [ 7.460647] Bluetooth: Core ver 2.21 [ 7.465937] NET: Registered protocol family 31 [ 7.471134] Bluetooth: HCI device and connection manager initialized [ 7.476354] Bluetooth: HCI socket layer initialized [ 7.476966] input: Goodix Capacitive TouchScreen as /devices/platform/80860F41:03/i2c-3/i2c-GDIX1001:00/input/input4 [ 7.491836] Bluetooth: L2CAP socket layer initialized [ 7.497102] Bluetooth: SCO socket layer initialized [ 7.512917] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 7.532396] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 8.054687] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 8.060924] thermal LNXTHERM:00: registered as thermal_zone2 [ 8.066121] ACPI: Thermal Zone [TZ00] (25 C) [ 8.582042] i8042: No controller found [ 8.595718] [drm:intel_detect_pch] No PCH found. [ 8.595722] [drm:get_allowed_dc_mask] Allowed DC state mask 00 [ 8.595973] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0f31 rev=0x0f flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug, [ 8.595974] [drm:intel_device_info_runtime_init] slice total: 0 [ 8.595975] [drm:intel_device_info_runtime_init] subslice total: 0 [ 8.595977] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 8.595978] [drm:intel_device_info_runtime_init] EU total: 0 [ 8.595979] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 8.595981] [drm:intel_device_info_runtime_init] has slice power gating: n [ 8.595982] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 8.595984] [drm:intel_device_info_runtime_init] has EU power gating: n [ 8.596052] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 32768K [ 8.596054] [drm] Memory usable by graphics device = 2048M [ 8.596056] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 8.596057] [drm:i915_ggtt_init_hw] GTT stolen size = 32M [ 8.596059] [drm:i915_ggtt_init_hw] ppgtt mode: 1 [ 8.596063] checking generic (40000000 3f0000) vs hw (40000000 10000000) [ 8.596064] fb: switching to inteldrmfb from EFI VGA [ 8.604059] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels [ 8.616926] Bluetooth: HCI UART driver ver 2.3 [ 8.616929] Bluetooth: HCI UART protocol H4 registered [ 8.616930] Bluetooth: HCI UART protocol BCSP registered [ 8.616932] Bluetooth: HCI UART protocol LL registered [ 8.616933] Bluetooth: HCI UART protocol ATH3K registered [ 8.616934] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.617035] Bluetooth: HCI UART protocol Intel registered [ 8.617087] Bluetooth: HCI UART protocol BCM registered [ 8.617089] Bluetooth: HCI UART protocol QCA registered [ 8.666382] Console: switching to colour dummy device 80x25 [ 8.666623] [drm] Replacing VGA console driver [ 8.666884] [drm:intel_opregion_setup] graphic opregion physical addr: 0x3bd1a010 [ 8.666898] [drm:intel_opregion_setup] Public ACPI methods supported [ 8.666902] [drm:intel_opregion_setup] ASLE supported [ 8.666907] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 8.666976] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.666977] [drm] Driver supports precise vblank timestamp query. [ 8.666983] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 8.666985] [drm:intel_bios_init] VBT signature "$VBT VALLEYVIEW ", BDB version 182 [ 8.666989] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 8.666990] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 8.666994] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [ 8.666997] [drm:parse_lfp_panel_data] Panel type: 0 (VBT) [ 8.666999] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 8.667036] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 8.667044] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 0 77260 800 840 844 992 1280 1290 1294 1298 0x8 0xa [ 8.667048] [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [ 8.667052] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 25000 Hz, active high, min brightness 0, level 255 [ 8.667056] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 8.667059] [drm:parse_driver_features] DRRS State Enabled:1 [ 8.667063] [drm:parse_mipi_config] Found MIPI Config block, panel index = 0 [ 8.667067] [drm:parse_mipi_sequence] Found MIPI sequence block v2 [ 8.667072] [drm:parse_mipi_sequence] MIPI related VBT parsing complete [ 8.667098] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 8.675127] [drm:intel_power_well_enable] enabling always-on [ 8.675135] [drm:intel_power_well_enable] enabling display [ 8.678288] [drm:intel_power_well_enable] enabling dpio-tx-b-01 [ 8.680275] [drm:intel_power_well_enable] enabling dpio-tx-b-23 [ 8.681847] [drm:intel_power_well_enable] enabling dpio-tx-c-01 [ 8.683606] [drm:intel_power_well_enable] enabling dpio-tx-c-23 [ 8.683966] [drm:intel_power_well_enable] enabling dpio-common [ 8.721646] [drm:intel_modeset_init] 2 display pipes available. [ 8.724535] [drm:intel_update_czclk] CZ clock rate: 333333 kHz [ 8.726315] [drm:intel_update_rawclk] rawclk rate: 200000 kHz [ 8.726333] [drm:intel_update_cdclk] Current CD clock rate: 333333 kHz [ 8.726344] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [ 8.726362] [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz [ 8.726381] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.727161] [drm:intel_dp_init_connector] Adding DP connector on port B [ 8.727482] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 8.727904] [drm:intel_dp_init_connector] Adding DP connector on port C [ 8.728206] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 8.728350] [drm:intel_dsi_init] [ 8.728371] [drm:vbt_panel_init] [ 8.728379] [drm:vbt_panel_init] Eot enabled [ 8.728385] [drm:vbt_panel_init] Clockstop enabled [ 8.728391] [drm:vbt_panel_init] Mode video [ 8.728396] [drm:vbt_panel_init] Dual link: NONE [ 8.728402] [drm:vbt_panel_init] Pixel Format 0 [ 8.728408] [drm:vbt_panel_init] TLPX 0 [ 8.728414] [drm:vbt_panel_init] LP RX Timeout 0xffff [ 8.728420] [drm:vbt_panel_init] Turnaround Timeout 0x14 [ 8.728426] [drm:vbt_panel_init] Init Count 0x7d0 [ 8.728432] [drm:vbt_panel_init] HS to LP Count 0x1c [ 8.728437] [drm:vbt_panel_init] LP Byte Clock 3 [ 8.728443] [drm:vbt_panel_init] DBI BW Timer 0x0 [ 8.728449] [drm:vbt_panel_init] LP to HS Clock Count 0x22 [ 8.728454] [drm:vbt_panel_init] HS to LP Clock Count 0xf [ 8.728460] [drm:vbt_panel_init] BTA enabled [ 8.728779] [drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip [ 8.728816] [drm:intel_panel_setup_backlight] failed to setup backlight for connector DSI-1 [ 8.728849] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled [ 8.728982] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled [ 8.728996] [drm:intel_modeset_readout_hw_state] [ENCODER:34:TMDS-34] hw state readout: disabled, pipe A [ 8.729006] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 8.729015] [drm:intel_modeset_readout_hw_state] [ENCODER:41:TMDS-41] hw state readout: disabled, pipe A [ 8.729024] [drm:intel_modeset_readout_hw_state] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A [ 8.729030] [drm:intel_dsi_get_hw_state] [ 8.729038] [drm:intel_dsi_get_config] [ 8.729044] [drm:vlv_dsi_get_pclk] [ 8.733490] [drm:intel_modeset_readout_hw_state] [ENCODER:45:DSI-45] hw state readout: enabled, pipe A [ 8.733510] [drm:intel_modeset_readout_hw_state] [CONNECTOR:35:HDMI-A-1] hw state readout: disabled [ 8.733522] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 8.733536] [drm:intel_modeset_readout_hw_state] [CONNECTOR:42:HDMI-A-2] hw state readout: disabled [ 8.733546] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:DP-2] hw state readout: disabled [ 8.733553] [drm:intel_dsi_get_hw_state] [ 8.733563] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:DSI-1] hw state readout: enabled [ 8.733628] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff88003b349000 for pipe A [ 8.733636] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 8.733643] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 8.733651] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8.733659] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8.733668] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8.733675] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8.733686] [drm:intel_dump_pipe_config] requested mode: [ 8.733698] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 61 78125 800 840 844 992 1280 1290 1294 1298 0x40 0x0 [ 8.733705] [drm:intel_dump_pipe_config] adjusted mode: [ 8.733716] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 61 78125 800 840 844 992 1280 1290 1294 1298 0x40 0x0 [ 8.733726] [drm:intel_dump_crtc_timings] crtc timings: 78125 800 840 844 992 1280 1290 1294 1298, type: 0x40 flags: 0x0 [ 8.733733] [drm:intel_dump_pipe_config] port clock: 78125 [ 8.733739] [drm:intel_dump_pipe_config] pipe src size: 800x1280 [ 8.733746] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8.733754] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8.733761] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8.733767] [drm:intel_dump_pipe_config] ips: 0 [ 8.733772] [drm:intel_dump_pipe_config] double wide: 0 [ 8.733780] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x30002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 8.733786] [drm:intel_dump_pipe_config] planes on this crtc [ 8.733800] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 8.733809] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 8.733817] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 8.733825] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 8.733835] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff880039ef0800 for pipe B [ 8.733841] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 8.733848] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 8.733856] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8.733864] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 8.733872] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 8.733879] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 8.733884] [drm:intel_dump_pipe_config] requested mode: [ 8.733894] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8.733900] [drm:intel_dump_pipe_config] adjusted mode: [ 8.733910] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 8.733919] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 8.733925] [drm:intel_dump_pipe_config] port clock: 0 [ 8.733931] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 8.733939] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 8.733946] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 8.733958] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 8.733964] [drm:intel_dump_pipe_config] ips: 0 [ 8.733970] [drm:intel_dump_pipe_config] double wide: 0 [ 8.733977] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 8.733983] [drm:intel_dump_pipe_config] planes on this crtc [ 8.733991] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = 0 [ 8.733999] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = 0 [ 8.734008] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = 0 [ 8.734295] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = 0 [ 8.734314] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256 [ 8.734322] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128 [ 8.734330] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127 [ 8.734339] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256 [ 8.734353] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128 [ 8.734361] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127 [ 8.734369] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 8.734377] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 8.734385] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 8.734399] [drm:intel_power_well_disable] disabling dpio-common [ 8.744524] [drm:intel_power_well_disable] disabling dpio-tx-c-23 [ 8.752295] [drm:intel_power_well_disable] disabling dpio-tx-c-01 [ 8.760247] [drm:intel_power_well_disable] disabling dpio-tx-b-23 [ 8.763567] [drm:intel_power_well_disable] disabling dpio-tx-b-01 [ 8.766204] [drm:i9xx_get_initial_plane_config] pipe/plane A/0 with fb: size=800x1280@32, offset=0, pitch 3200, size 0x3e8000 [ 8.766228] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=3e8000 [ 8.766260] [drm:i915_pages_create_for_stolen] offset=0x0, size=4096000 [ 8.766289] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88003a830000 [ 8.766315] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 3e8000 [ 8.766329] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [3e8000, 7ffff000] [ 8.771235] intel_sst_acpi 80860F28:00: LPE base: 0x50a00000 size:0x200000 [ 8.771255] intel_sst_acpi 80860F28:00: IRAM base: 0x50ac0000 [ 8.771302] intel_sst_acpi 80860F28:00: DRAM base: 0x50b00000 [ 8.771321] intel_sst_acpi 80860F28:00: SHIM base: 0x50b40000 [ 8.771341] intel_sst_acpi 80860F28:00: Mailbox base: 0x50b44000 [ 8.771359] intel_sst_acpi 80860F28:00: DDR base: 0x20000000 [ 8.774444] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 [ 8.775114] intel_sst_acpi 80860F28:00: Got drv data max stream 25 [ 8.779048] [drm:i915_gem_context_init] HW context support initialized [ 8.779071] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 8.779082] [drm:i915_pages_create_for_stolen] offset=0x3e8000, size=131072 [ 8.779123] [drm:init_status_page] render ring hws offset: 0x003e9000 [ 8.779235] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0040c000 [ 8.779246] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 8.779255] [drm:i915_pages_create_for_stolen] offset=0x408000, size=131072 [ 8.779291] [drm:init_status_page] bsd ring hws offset: 0x0040d000 [ 8.779331] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000 [ 8.779342] [drm:i915_pages_create_for_stolen] offset=0x428000, size=131072 [ 8.779394] [drm:init_status_page] blitter ring hws offset: 0x00430000 [ 8.783366] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=1efa000, gtt_offset=ffffffff, size=6000 [ 8.783381] [drm:i915_pages_create_for_stolen] offset=0x1efa000, size=24576 [ 8.783389] [drm:valleyview_setup_pctx] PCBR: 0x3eefa001 [ 8.785354] [drm:vlv_init_gpll_ref_freq] GPLL reference freq: 20833 kHz [ 8.785624] [drm:valleyview_init_gt_powersave] DDR speed: 1333 MHz [ 8.787416] [drm:valleyview_init_gt_powersave] max GPU freq: 646 MHz (214) [ 8.792504] [drm:valleyview_init_gt_powersave] RPe GPU freq: 646 MHz (214) [ 8.794439] [drm:valleyview_init_gt_powersave] RP1(Guar Freq) GPU freq: 312 MHz (198) [ 8.796077] [drm:valleyview_init_gt_powersave] min GPU freq: 187 MHz (192) [ 8.796344] [drm:intel_update_cdclk] Current CD clock rate: 333333 kHz [ 8.796386] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 8.796395] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 8.796401] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 8.796411] [drm:intel_fbdev_init_bios] pipe A area: 800x1280, bpp: 32, size: 4096000 [ 8.796419] [drm:intel_fbdev_init_bios] fb big enough for plane A (4096000 >= 4096000) [ 8.796425] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 8.796431] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 8.796488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:35:HDMI-A-1] [ 8.796497] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-1] [ 8.797953] [drm:intel_didl_outputs] 10 outputs detected [ 8.803584] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 8.803626] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.806375] acpi device:21: registered as cooling_device7 [ 8.806703] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 8.806862] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 [ 8.853594] [drm:intel_hdmi_detect] HDMI live status down [ 8.853624] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:35:HDMI-A-1] status updated from unknown to disconnected [ 8.853654] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:35:HDMI-A-1] disconnected [ 8.853671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] [ 8.853683] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 8.853699] [drm:intel_power_well_enable] enabling dpio-tx-b-01 [ 8.855387] [drm:intel_power_well_enable] enabling dpio-tx-b-23 [ 8.857191] [drm:intel_power_well_enable] enabling dpio-tx-c-01 [ 8.860437] [drm:intel_power_well_enable] enabling dpio-tx-c-23 [ 8.862250] [drm:intel_power_well_enable] enabling dpio-common [ 8.864105] [drm:intel_power_well_disable] disabling dpio-common [ 8.865908] [drm:intel_power_well_disable] disabling dpio-tx-c-23 [ 8.867726] [drm:intel_power_well_disable] disabling dpio-tx-c-01 [ 8.869534] [drm:intel_power_well_disable] disabling dpio-tx-b-23 [ 8.871374] [drm:intel_power_well_disable] disabling dpio-tx-b-01 [ 8.873199] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] status updated from unknown to disconnected [ 8.873240] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] disconnected [ 8.873258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:HDMI-A-2] [ 8.873270] [drm:intel_hdmi_detect] [CONNECTOR:42:HDMI-A-2] [ 8.930870] [drm:intel_hdmi_detect] HDMI live status down [ 8.930888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:HDMI-A-2] status updated from unknown to disconnected [ 8.930895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:HDMI-A-2] disconnected [ 8.930904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-2] [ 8.930910] [drm:intel_dp_detect] [CONNECTOR:44:DP-2] [ 8.930919] [drm:intel_power_well_enable] enabling dpio-tx-b-01 [ 8.939918] [drm:intel_power_well_enable] enabling dpio-tx-b-23 [ 8.945697] [drm:intel_power_well_enable] enabling dpio-tx-c-01 [ 8.951482] smsc95xx v1.0.4 [ 8.952941] [drm:intel_power_well_enable] enabling dpio-tx-c-23 [ 8.960632] [drm:intel_power_well_enable] enabling dpio-common [ 8.962349] mousedev: PS/2 mouse device common for all mice [ 8.967853] [drm:intel_power_well_disable] disabling dpio-common [ 8.975079] [drm:intel_power_well_disable] disabling dpio-tx-c-23 [ 8.980335] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-0000:00:14.0-1.1, smsc95xx USB 2.0 Ethernet, 00:50:b6:5f:76:77 [ 8.980439] usbcore: registered new interface driver smsc95xx [ 8.982296] [drm:intel_power_well_disable] disabling dpio-tx-c-01 [ 8.982370] iTCO_vendor_support: vendor-support=0 [ 8.988798] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 8.989110] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 8.989387] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.989534] [drm:intel_power_well_disable] disabling dpio-tx-b-23 [ 8.996778] [drm:intel_power_well_disable] disabling dpio-tx-b-01 [ 9.004027] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-2] status updated from unknown to disconnected [ 9.004036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-2] disconnected [ 9.004043] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DSI-1] [ 9.004047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DSI-1] status updated from unknown to connected [ 9.004051] [drm:intel_dsi_get_modes] [ 9.004060] [drm:intel_dsi_mode_valid] [ 9.004065] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DSI-1] probed modes : [ 9.004073] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x1280" 60 77260 800 840 844 992 1280 1290 1294 1298 0x8 0xa [ 9.004079] [drm:drm_setup_crtcs] [ 9.004085] [drm:drm_enable_connectors] connector 35 enabled? no [ 9.004088] [drm:drm_enable_connectors] connector 40 enabled? no [ 9.004092] [drm:drm_enable_connectors] connector 42 enabled? no [ 9.004095] [drm:drm_enable_connectors] connector 44 enabled? no [ 9.004098] [drm:drm_enable_connectors] connector 46 enabled? yes [ 9.004103] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 9.004107] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 9.004110] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 9.004113] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 9.004118] [drm:intel_fb_initial_config] looking for cmdline mode on connector DSI-1 [ 9.004122] [drm:intel_fb_initial_config] looking for preferred mode on connector DSI-1 0 [ 9.004127] [drm:intel_fb_initial_config] connector DSI-1 on pipe A [CRTC:26]: 800x1280 [ 9.004132] [drm:drm_setup_crtcs] desired mode 800x1280 set on crtc 26 (0,0) [ 9.004138] [drm:intelfb_create] re-using BIOS fb [ 9.004202] [drm:intelfb_create] allocated 800x1280 fb: 0x00000000, bo ffff88003a830000 [ 9.004378] fbcon: inteldrmfb (fb0) is primary device [ 9.004555] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DSI-1] checking for sink bpp constrains [ 9.004557] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 24 [ 9.004559] [drm:intel_dsi_compute_config] [ 9.004568] [drm:vlv_compute_dsi_pll] dsi pll div 00000179, ctrl 80080100 [ 9.004571] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 24, dithering: 0 [ 9.004575] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880035078800 for pipe A [ 9.004577] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9.004578] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 9.004581] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.004584] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.004586] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.004587] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.004588] [drm:intel_dump_pipe_config] requested mode: [ 9.004593] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 60 77260 800 840 844 992 1280 1290 1294 1298 0x8 0xa [ 9.004594] [drm:intel_dump_pipe_config] adjusted mode: [ 9.004598] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 0 77260 800 840 844 992 1280 1290 1294 1298 0x8 0x0 [ 9.004601] [drm:intel_dump_crtc_timings] crtc timings: 77260 800 840 844 992 1280 1290 1294 1298, type: 0x8 flags: 0x0 [ 9.004603] [drm:intel_dump_pipe_config] port clock: 77260 [ 9.004604] [drm:intel_dump_pipe_config] pipe src size: 800x1280 [ 9.004606] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9.004608] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.004610] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.004611] [drm:intel_dump_pipe_config] ips: 0 [ 9.004612] [drm:intel_dump_pipe_config] double wide: 0 [ 9.004615] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x30002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 9.004616] [drm:intel_dump_pipe_config] planes on this crtc [ 9.004621] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 9.004625] [drm:intel_dump_pipe_config] FB:51, fb = 800x1280 format = 0x34325258 [ 9.004625] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x1280 dst (0, 0) 800x1280 [ 9.004627] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 9.004630] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 9.004632] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 9.004636] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667 [ 9.004658] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 9.019368] [drm:intel_dsi_pre_disable] [ 9.020109] nfc: nfc_init: NFC Core ver 0.1 [ 9.020149] NET: Registered protocol family 39 [ 9.027570] [drm:intel_disable_pipe] disabling pipe A [ 9.029934] SSE version of gcm_enc/dec engaged. [ 9.036653] [drm:intel_dsi_post_disable] [ 9.036655] [drm:intel_dsi_disable] [ 9.040241] [drm:generic_exec_sequence] MIPI sequence 4 - MIPI_SEQ_DISPLAY_OFF not available [ 9.040244] [drm:intel_dsi_clear_device_ready] [ 9.049300] [drm:vlv_disable_dsi_pll] [ 9.049948] Probing NFC pn544 [ 9.052909] [drm:generic_exec_sequence] MIPI sequence 5 - MIPI_SEQ_DEASSERT_RESET not available [ 9.069278] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> media-cpu-dai mapping ok [ 9.069348] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok [ 9.069389] compress asoc: snd-soc-dummy-dai <-> compress-cpu-dai mapping ok [ 9.081062] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp2-port mapping ok [ 9.125019] smsc95xx 1-1.1:1.0 enp0s20u1u1: renamed from eth0 [ 9.210638] intel_rapl: Found RAPL domain package [ 9.210643] intel_rapl: Found RAPL domain core [ 9.299273] smsc95xx 1-1.1:1.0 enp0s20u1u1: hardware isn't capable of remote wakeup [ 9.299567] IPv6: ADDRCONF(NETDEV_UP): enp0s20u1u1: link is not ready [ 9.363634] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 9.363648] [drm:verify_encoder_state] [ENCODER:34:TMDS-34] [ 9.363661] [drm:verify_encoder_state] [ENCODER:39:TMDS-39] [ 9.363667] [drm:verify_encoder_state] [ENCODER:41:TMDS-41] [ 9.363673] [drm:verify_encoder_state] [ENCODER:43:TMDS-43] [ 9.363679] [drm:verify_encoder_state] [ENCODER:45:DSI-45] [ 9.363686] [drm:intel_connector_verify_state] [CONNECTOR:35:HDMI-A-1] [ 9.363692] [drm:intel_connector_verify_state] [CONNECTOR:40:DP-1] [ 9.363698] [drm:intel_connector_verify_state] [CONNECTOR:42:HDMI-A-2] [ 9.363704] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-2] [ 9.363731] [drm:intel_dsi_pre_enable] [ 9.363735] [drm:vlv_disable_dsi_pll] [ 9.365856] [drm:vlv_enable_dsi_pll] [ 9.374926] [drm:vlv_enable_dsi_pll] DSI PLL locked [ 9.374934] [drm:intel_dsi_prepare] pipe A [ 9.404341] [drm:vlv_dsi_device_ready] [ 9.420283] [drm:generic_exec_sequence] Starting MIPI sequence 1 - MIPI_SEQ_ASSERT_RESET [ 9.596846] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 9.596861] [drm:valleyview_enable_rps] GPLL enabled? yes [ 9.596867] [drm:valleyview_enable_rps] GPU status: 0x0000c6d0 [ 9.596875] [drm:valleyview_enable_rps] current GPU freq: 312 MHz (198) [ 9.596880] [drm:valleyview_enable_rps] setting GPU freq to 187 MHz (192) [ 9.652559] [drm:generic_exec_sequence] Starting MIPI sequence 2 - MIPI_SEQ_INIT_OTP [ 9.894032] [drm:intel_dsi_enable] [ 9.970663] [drm:generic_exec_sequence] MIPI sequence 3 - MIPI_SEQ_DISPLAY_ON not available [ 9.970796] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 9.970815] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=461, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0 [ 9.970820] [drm:intel_enable_pipe] enabling pipe A [ 9.970846] [drm:intel_dsi_enable_nop] [ 9.987903] [drm:intel_connector_verify_state] [CONNECTOR:46:DSI-1] [ 9.987909] [drm:intel_dsi_get_hw_state] [ 9.987931] [drm:verify_crtc_state] [CRTC:26] [ 9.987949] [drm:intel_dsi_get_hw_state] [ 9.987956] [drm:intel_dsi_get_config] [ 9.987960] [drm:vlv_dsi_get_pclk] [ 9.991153] [drm:drm_fb_helper_hotplug_event] [ 9.991165] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:35:HDMI-A-1] [ 9.991171] [drm:intel_hdmi_detect] [CONNECTOR:35:HDMI-A-1] [ 10.051644] [drm:intel_hdmi_detect] HDMI live status down [ 10.051660] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:35:HDMI-A-1] disconnected [ 10.051670] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] [ 10.051676] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 10.051686] [drm:intel_power_well_enable] enabling dpio-tx-b-01 [ 10.053914] [drm:intel_power_well_enable] enabling dpio-tx-b-23 [ 10.056233] [drm:intel_power_well_enable] enabling dpio-tx-c-01 [ 10.058562] [drm:intel_power_well_enable] enabling dpio-tx-c-23 [ 10.060928] [drm:intel_power_well_enable] enabling dpio-common [ 10.063301] [drm:intel_power_well_disable] disabling dpio-common [ 10.065665] [drm:intel_power_well_disable] disabling dpio-tx-c-23 [ 10.068037] [drm:intel_power_well_disable] disabling dpio-tx-c-01 [ 10.070378] [drm:intel_power_well_disable] disabling dpio-tx-b-23 [ 10.072766] [drm:intel_power_well_disable] disabling dpio-tx-b-01 [ 10.075115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] disconnected [ 10.075127] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:HDMI-A-2] [ 10.075133] [drm:intel_hdmi_detect] [CONNECTOR:42:HDMI-A-2] [ 10.143893] [drm:intel_hdmi_detect] HDMI live status down [ 10.143910] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:HDMI-A-2] disconnected [ 10.143924] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-2] [ 10.143929] [drm:intel_dp_detect] [CONNECTOR:44:DP-2] [ 10.143938] [drm:intel_power_well_enable] enabling dpio-tx-b-01 [ 10.146199] [drm:intel_power_well_enable] enabling dpio-tx-b-23 [ 10.148543] [drm:intel_power_well_enable] enabling dpio-tx-c-01 [ 10.150895] [drm:intel_power_well_enable] enabling dpio-tx-c-23 [ 10.153272] [drm:intel_power_well_enable] enabling dpio-common [ 10.155700] [drm:intel_power_well_disable] disabling dpio-common [ 10.158014] [drm:intel_power_well_disable] disabling dpio-tx-c-23 [ 10.160329] [drm:intel_power_well_disable] disabling dpio-tx-c-01 [ 10.162679] [drm:intel_power_well_disable] disabling dpio-tx-b-23 [ 10.165070] [drm:intel_power_well_disable] disabling dpio-tx-b-01 [ 10.167408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-2] disconnected [ 10.167420] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DSI-1] [ 10.167426] [drm:intel_dsi_get_modes] [ 10.167443] [drm:intel_dsi_mode_valid] [ 10.167451] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DSI-1] probed modes : [ 10.167470] [drm:drm_mode_debug_printmodeline] Modeline 47:"800x1280" 60 77260 800 840 844 992 1280 1290 1294 1298 0x8 0xa [ 10.167483] [drm:drm_setup_crtcs] [ 10.167492] [drm:drm_enable_connectors] connector 35 enabled? no [ 10.167497] [drm:drm_enable_connectors] connector 40 enabled? no [ 10.167502] [drm:drm_enable_connectors] connector 42 enabled? no [ 10.167506] [drm:drm_enable_connectors] connector 44 enabled? no [ 10.167511] [drm:drm_enable_connectors] connector 46 enabled? yes [ 10.167519] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 10.167523] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 10.167528] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 10.167532] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 10.167540] [drm:intel_fb_initial_config] looking for cmdline mode on connector DSI-1 [ 10.167546] [drm:intel_fb_initial_config] looking for preferred mode on connector DSI-1 0 [ 10.167554] [drm:intel_fb_initial_config] connector DSI-1 on pipe A [CRTC:26]: 800x1280 [ 10.167562] [drm:drm_setup_crtcs] desired mode 800x1280 set on crtc 26 (0,0) [ 10.167773] Console: switching to colour frame buffer device 100x80 [ 10.190069] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 10.281160] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!! [ 10.281589] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!! [ 10.281952] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!! [ 10.282311] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!! [ 10.282661] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!! [ 10.283026] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!! [ 10.283401] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!! [ 10.283806] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!! [ 10.700901] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u1u1: link becomes ready [ 10.701853] smsc95xx 1-1.1:1.0 enp0s20u1u1: link up, 100Mbps, full-duplex, lpa 0x4DE1 [ 10.704996] smsc95xx 1-1.1:1.0 enp0s20u1u1: link up, 100Mbps, full-duplex, lpa 0x4DE1 [ 10.859154] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!! [ 10.869935] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!! [ 10.880134] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!! [ 10.890591] sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!! [ 10.900613] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!! [ 10.911402] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!! [ 10.922051] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!! [ 10.933768] sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!! [ 6373.679379] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DSI-1] checking for sink bpp constrains [ 6373.679387] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 24 [ 6373.679394] [drm:intel_dsi_compute_config] [ 6373.679419] [drm:vlv_compute_dsi_pll] dsi pll div 00000179, ctrl 80080100 [ 6373.679427] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 24, dithering: 0 [ 6373.679439] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88003a1a1000 for pipe A [ 6373.679444] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 6373.679449] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 6373.679457] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 6373.679465] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 6373.679472] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 6373.679477] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 6373.679480] [drm:intel_dump_pipe_config] requested mode: [ 6373.679496] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 60 77260 800 840 844 992 1280 1290 1294 1298 0x8 0xa [ 6373.679500] [drm:intel_dump_pipe_config] adjusted mode: [ 6373.679512] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 0 77260 800 840 844 992 1280 1290 1294 1298 0x8 0x0 [ 6373.679523] [drm:intel_dump_crtc_timings] crtc timings: 77260 800 840 844 992 1280 1290 1294 1298, type: 0x8 flags: 0x0 [ 6373.679527] [drm:intel_dump_pipe_config] port clock: 77260 [ 6373.679532] [drm:intel_dump_pipe_config] pipe src size: 800x1280 [ 6373.679538] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 6373.679544] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 6373.679550] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 6373.679554] [drm:intel_dump_pipe_config] ips: 0 [ 6373.679558] [drm:intel_dump_pipe_config] double wide: 0 [ 6373.679565] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x30002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 6373.679568] [drm:intel_dump_pipe_config] planes on this crtc [ 6373.679583] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 6373.679594] [drm:intel_dump_pipe_config] FB:51, fb = 800x1280 format = 0x34325258 [ 6373.679595] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x1280 dst (0, 0) 800x1280 [ 6373.679603] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 6373.679611] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 6373.679619] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 6373.679633] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 200000 [ 6373.679681] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 6373.681589] [drm:intel_dsi_pre_disable] [ 6373.942055] [drm:intel_disable_pipe] disabling pipe A [ 6373.994611] [drm:intel_dsi_post_disable] [ 6373.994615] [drm:intel_dsi_disable] [ 6374.099727] [drm:generic_exec_sequence] MIPI sequence 4 - MIPI_SEQ_DISPLAY_OFF not available [ 6374.099732] [drm:intel_dsi_clear_device_ready] [ 6374.362536] [drm:vlv_disable_dsi_pll] [ 6374.415109] [drm:generic_exec_sequence] MIPI sequence 5 - MIPI_SEQ_DEASSERT_RESET not available [ 6383.194214] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 6383.194233] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0 [ 6383.299395] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz [ 6383.299407] [drm:verify_encoder_state] [ENCODER:34:TMDS-34] [ 6383.299417] [drm:verify_encoder_state] [ENCODER:39:TMDS-39] [ 6383.299424] [drm:verify_encoder_state] [ENCODER:41:TMDS-41] [ 6383.299429] [drm:verify_encoder_state] [ENCODER:43:TMDS-43] [ 6383.299435] [drm:verify_encoder_state] [ENCODER:45:DSI-45] [ 6383.299441] [drm:intel_connector_verify_state] [CONNECTOR:35:HDMI-A-1] [ 6383.299448] [drm:intel_connector_verify_state] [CONNECTOR:40:DP-1] [ 6383.299454] [drm:intel_connector_verify_state] [CONNECTOR:42:HDMI-A-2] [ 6383.299460] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-2] [ 6383.299473] [drm:intel_power_well_disable] disabling display [ 6383.352005] [drm:intel_connector_verify_state] [CONNECTOR:46:DSI-1] [ 6383.352010] [drm:intel_dsi_get_hw_state] [ 6383.352019] [drm:verify_crtc_state] [CRTC:26] [ 6383.352025] [drm:intel_dsi_get_hw_state] [ 6383.352033] [drm:intel_power_well_disable] disabling always-on