[ 1557.764757] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1557.764758] [drm:intel_dump_pipe_config] requested mode: [ 1557.764760] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1557.764761] [drm:intel_dump_pipe_config] adjusted mode: [ 1557.764763] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1557.764765] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1557.764767] [drm:intel_dump_pipe_config] port clock: 540000 [ 1557.764768] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1557.764769] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1557.764770] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1557.764772] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1557.764773] [drm:intel_dump_pipe_config] ips: 0 [ 1557.764774] [drm:intel_dump_pipe_config] double wide: 0 [ 1557.764775] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1557.764776] [drm:intel_dump_pipe_config] planes on this crtc [ 1557.764777] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1557.764779] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1557.764781] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1557.764784] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1557.764787] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1557.764789] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1557.764790] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1557.766346] [drm:intel_power_well_enable] enabling always-on [ 1557.766347] [drm:intel_power_well_enable] enabling DC off [ 1557.766349] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1557.766356] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1557.766360] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1557.766363] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1557.766364] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1557.766366] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1557.766367] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1557.766368] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1557.766369] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1557.766371] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1557.766373] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1557.766374] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1557.766375] [drm:verify_single_dpll_state] DPLL 0 [ 1557.766378] [drm:verify_single_dpll_state] DPPL 1 [ 1557.766380] [drm:verify_single_dpll_state] DPPL 2 [ 1557.766381] [drm:verify_single_dpll_state] DPPL 3 [ 1557.766384] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1557.766385] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1557.766418] [drm:edp_panel_on] Turn eDP port A panel power on [ 1557.766426] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1558.232242] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1558.252486] [drm:wait_panel_status] Wait complete [ 1558.252516] [drm:wait_panel_on] Wait for panel power on [ 1558.252536] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1558.314457] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1558.314466] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1558.314470] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1558.314510] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1558.472152] [drm:wait_panel_status] Wait complete [ 1558.472169] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1558.472216] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1558.473309] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1558.473311] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1558.473312] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1558.473949] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1558.474884] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1558.475042] [drm:skylake_pfit_enable] for crtc_state = ffff88008a24e000 [ 1558.475639] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1558.475644] [drm:intel_enable_pipe] enabling pipe A [ 1558.475661] [drm:intel_edp_backlight_on] [ 1558.475662] [drm:intel_panel_enable_backlight] pipe A [ 1558.475701] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1558.480058] [drm:intel_psr_match_conditions] PSR disable by flag [ 1558.480061] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1558.492374] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1558.492381] [drm:verify_crtc_state] [CRTC:26] [ 1558.492402] [drm:verify_single_dpll_state] DPLL 0 [ 1558.492425] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1558.542384] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1558.609413] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1558.609430] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1558.609433] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1558.625698] [drm:intel_edp_backlight_off] [ 1558.659913] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010 [ 1558.659917] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 1558.659938] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 1558.660386] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 1558.661011] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1558.661334] [drm:intel_dp_get_dpcd] EDP DPCD : 02 b7 f6 [ 1558.661336] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1558.661338] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1558.661339] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1558.661340] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1558.828144] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1558.828187] [drm:intel_disable_pipe] disabling pipe A [ 1558.842975] [drm:edp_panel_off] Turn eDP port A panel power off [ 1558.843004] [drm:wait_panel_off] Wait for panel power off time [ 1558.843023] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000 [ 1558.854107] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1558.854116] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1558.854120] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1558.874999] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1558.875008] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1558.875012] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1558.896444] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1558.896453] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1558.896457] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1558.903611] [drm:wait_panel_status] Wait complete [ 1558.903630] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1558.903637] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1558.903679] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1558.903685] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1558.903688] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1558.903691] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1558.903693] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1558.903696] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1558.903699] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1558.903704] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1558.903707] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1558.903710] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1558.903713] [drm:verify_single_dpll_state] DPLL 0 [ 1558.903718] [drm:verify_single_dpll_state] DPPL 1 [ 1558.903721] [drm:verify_single_dpll_state] DPPL 2 [ 1558.903725] [drm:verify_single_dpll_state] DPPL 3 [ 1558.903732] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1558.903739] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1558.903748] [drm:verify_crtc_state] [CRTC:26] [ 1558.903789] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1558.903824] [drm:drm_mode_setcrtc] [CRTC:34:crtc-2] [ 1558.903867] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1558.903880] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1559.444076] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1559.464100] [drm:wait_panel_status] Wait complete [ 1559.464141] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 1559.464150] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled [ 1559.525761] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1559.525766] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1559.525768] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1559.668582] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1559.670614] [drm:drm_mode_addfb2] [FB:95] [ 1559.670631] [drm:drm_mode_addfb2] [FB:96] [ 1559.670645] [drm:drm_mode_addfb2] [FB:126] [ 1559.670659] [drm:drm_mode_addfb2] [FB:127] [ 1559.670673] [drm:drm_mode_addfb2] [FB:132] [ 1559.846610] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1559.846615] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1559.846624] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1559.846625] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1559.846627] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1559.846628] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1559.846630] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1559.846630] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1559.846632] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1559.846633] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88008a22f800 for pipe A [ 1559.846634] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1559.846635] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1559.846636] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1559.846637] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1559.846638] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1559.846639] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1559.846639] [drm:intel_dump_pipe_config] requested mode: [ 1559.846641] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1559.846642] [drm:intel_dump_pipe_config] adjusted mode: [ 1559.846643] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1559.846644] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1559.846645] [drm:intel_dump_pipe_config] port clock: 540000 [ 1559.846646] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1559.846647] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1559.846648] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1559.846648] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1559.846649] [drm:intel_dump_pipe_config] ips: 0 [ 1559.846650] [drm:intel_dump_pipe_config] double wide: 0 [ 1559.846651] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1559.846651] [drm:intel_dump_pipe_config] planes on this crtc [ 1559.846652] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1559.846653] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1559.846654] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1559.846657] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1559.846659] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1559.846660] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1559.846661] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1559.847669] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1559.847672] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1559.847675] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1559.847676] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1559.847677] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1559.847678] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1559.847679] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1559.847679] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1559.847680] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1559.847681] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1559.847682] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1559.847683] [drm:verify_single_dpll_state] DPLL 0 [ 1559.847685] [drm:verify_single_dpll_state] DPPL 1 [ 1559.847686] [drm:verify_single_dpll_state] DPPL 2 [ 1559.847688] [drm:verify_single_dpll_state] DPPL 3 [ 1559.847690] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1559.847690] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1559.847721] [drm:edp_panel_on] Turn eDP port A panel power on [ 1559.847728] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1559.847744] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 1559.847751] [drm:wait_panel_status] Wait complete [ 1559.847774] [drm:wait_panel_on] Wait for panel power on [ 1559.847790] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 1560.048288] [drm:wait_panel_status] Wait complete [ 1560.049451] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1560.049458] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1560.049461] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1560.050129] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1560.051094] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1560.051267] [drm:skylake_pfit_enable] for crtc_state = ffff88008a22f800 [ 1560.052260] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1560.052271] [drm:intel_enable_pipe] enabling pipe A [ 1560.052290] [drm:intel_edp_backlight_on] [ 1560.052293] [drm:intel_panel_enable_backlight] pipe A [ 1560.052335] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1560.056119] [drm:intel_psr_match_conditions] PSR disable by flag [ 1560.056125] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1560.069037] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1560.069047] [drm:verify_crtc_state] [CRTC:26] [ 1560.069080] [drm:verify_single_dpll_state] DPLL 0 [ 1560.069118] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1560.119210] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1560.189932] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010 [ 1560.189940] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 1560.189977] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 1560.190460] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 1560.191117] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1560.191456] [drm:intel_dp_get_dpcd] EDP DPCD : 02 b7 f6 [ 1560.191460] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1560.191465] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1560.191468] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1560.191471] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1560.253075] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1560.253085] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1560.253119] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1560.269226] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1560.319190] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1560.386028] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1560.386039] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1560.386063] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1560.402398] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1560.452382] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1560.519332] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1560.519336] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1560.519347] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1560.535697] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1560.585715] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1560.652748] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1560.652753] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1560.652764] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1560.669086] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1560.719088] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1560.786159] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1560.786187] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1560.786193] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1560.802538] [drm:intel_edp_backlight_off] [ 1561.004288] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1561.004336] [drm:intel_disable_pipe] disabling pipe A [ 1561.019200] [drm:edp_panel_off] Turn eDP port A panel power off [ 1561.019229] [drm:wait_panel_off] Wait for panel power off time [ 1561.019249] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1561.029895] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1561.029904] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1561.029908] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1561.029947] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1561.050751] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1561.050759] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1561.050763] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1561.050804] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1561.072696] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1561.072704] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1561.072708] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1561.072748] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1561.079863] [drm:wait_panel_status] Wait complete [ 1561.079883] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1561.079890] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1561.079931] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1561.079937] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1561.079941] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1561.079943] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1561.079946] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1561.079948] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1561.079952] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1561.079957] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1561.079960] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1561.079962] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1561.079965] [drm:verify_single_dpll_state] DPLL 0 [ 1561.079970] [drm:verify_single_dpll_state] DPPL 1 [ 1561.079974] [drm:verify_single_dpll_state] DPPL 2 [ 1561.079977] [drm:verify_single_dpll_state] DPPL 3 [ 1561.079984] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1561.079991] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1561.080001] [drm:verify_crtc_state] [CRTC:26] [ 1561.080007] [drm:intel_power_well_disable] disabling DC off [ 1561.080014] [drm:skl_enable_dc6] Enabling DC6 [ 1561.080018] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1561.080373] [drm:intel_power_well_disable] disabling always-on [ 1561.080418] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1561.080458] [drm:drm_mode_setcrtc] [CRTC:34:crtc-2] [ 1561.091475] Setting dangerous option enable_psr - tainting kernel [ 1561.127296] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1561.127301] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1561.127311] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1561.127312] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1561.127314] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1561.127315] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1561.127317] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1561.127318] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1561.127319] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1561.127320] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88008a24d000 for pipe A [ 1561.127321] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1561.127322] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1561.127323] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1561.127324] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1561.127325] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1561.127326] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1561.127327] [drm:intel_dump_pipe_config] requested mode: [ 1561.127328] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1561.127329] [drm:intel_dump_pipe_config] adjusted mode: [ 1561.127330] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1561.127331] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1561.127332] [drm:intel_dump_pipe_config] port clock: 540000 [ 1561.127333] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1561.127334] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1561.127335] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1561.127336] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1561.127336] [drm:intel_dump_pipe_config] ips: 0 [ 1561.127337] [drm:intel_dump_pipe_config] double wide: 0 [ 1561.127338] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1561.127338] [drm:intel_dump_pipe_config] planes on this crtc [ 1561.127339] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1561.127340] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1561.127341] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1561.127344] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1561.127346] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1561.127347] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1561.127348] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1561.128379] [drm:intel_power_well_enable] enabling always-on [ 1561.128381] [drm:intel_power_well_enable] enabling DC off [ 1561.128584] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1561.128591] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1561.128593] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1561.128596] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1561.128597] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1561.128599] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1561.128599] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1561.128600] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1561.128601] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1561.128602] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1561.128603] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1561.128604] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1561.128605] [drm:verify_single_dpll_state] DPLL 0 [ 1561.128607] [drm:verify_single_dpll_state] DPPL 1 [ 1561.128608] [drm:verify_single_dpll_state] DPPL 2 [ 1561.128610] [drm:verify_single_dpll_state] DPPL 3 [ 1561.128612] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1561.128612] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1561.128656] [drm:edp_panel_on] Turn eDP port A panel power on [ 1561.128663] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1561.624142] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1561.664403] [drm:wait_panel_status] Wait complete [ 1561.664428] [drm:wait_panel_on] Wait for panel power on [ 1561.664444] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1561.726392] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1561.726398] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1561.726401] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1561.726434] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1561.881730] [drm:wait_panel_status] Wait complete [ 1561.881755] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1561.881805] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1561.882945] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1561.882949] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1561.882952] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1561.883619] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1561.884596] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1561.884770] [drm:skylake_pfit_enable] for crtc_state = ffff88008a24d000 [ 1561.885717] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1561.885726] [drm:intel_enable_pipe] enabling pipe A [ 1561.885753] [drm:intel_edp_backlight_on] [ 1561.885756] [drm:intel_panel_enable_backlight] pipe A [ 1561.885797] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1561.888353] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1561.902542] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1561.902556] [drm:verify_crtc_state] [CRTC:26] [ 1561.902591] [drm:verify_single_dpll_state] DPLL 0 [ 1561.902637] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1561.952669] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1562.037180] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1562.037187] [drm:drm_mode_setcrtc] [CONNECTOR:46:DP-1] [ 1562.037197] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DP-1] checking for sink bpp constrains [ 1562.037198] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1562.037201] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1562.037202] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1562.037203] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1562.037204] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1562.037206] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff88008a249000 for pipe B [ 1562.037207] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1562.037207] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1562.037208] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1562.037209] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1562.037210] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1562.037211] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1562.037212] [drm:intel_dump_pipe_config] requested mode: [ 1562.037213] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1562.037214] [drm:intel_dump_pipe_config] adjusted mode: [ 1562.037215] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1562.037217] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1562.037218] [drm:intel_dump_pipe_config] port clock: 162000 [ 1562.037219] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1562.037220] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1562.037221] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1562.037222] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1562.037222] [drm:intel_dump_pipe_config] ips: 0 [ 1562.037223] [drm:intel_dump_pipe_config] double wide: 0 [ 1562.037224] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 [ 1562.037224] [drm:intel_dump_pipe_config] planes on this crtc [ 1562.037226] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = -1 [ 1562.037227] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 1562.037228] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1562.037234] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1562.037238] [drm:intel_find_shared_dpll] CRTC:30 allocated DPPL 1 [ 1562.037239] [drm:intel_reference_shared_dpll] using DPPL 1 for pipe B [ 1562.037241] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1562.037927] [drm:intel_power_well_enable] enabling power well 2 [ 1562.037930] [drm:skl_set_power_well] Enabling power well 2 [ 1562.037939] [drm:intel_power_well_enable] enabling DDI B power well [ 1562.037942] [drm:skl_set_power_well] Enabling DDI B power well [ 1562.037944] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1562.037945] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1562.037946] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1562.037947] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1562.037948] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1562.037948] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1562.037950] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1562.037952] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1562.037953] [drm:verify_single_dpll_state] DPLL 0 [ 1562.037955] [drm:verify_single_dpll_state] DPPL 1 [ 1562.037956] [drm:verify_single_dpll_state] DPPL 2 [ 1562.037957] [drm:verify_single_dpll_state] DPPL 3 [ 1562.037959] [drm:intel_enable_shared_dpll] enable DPPL 1 (active 2, on? 0) for crtc 30 [ 1562.037960] [drm:intel_enable_shared_dpll] enabling DPPL 1 [ 1562.041078] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1562.041079] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1562.041080] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1562.041648] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1562.044143] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1562.044302] [drm:skylake_pfit_enable] for crtc_state = ffff88008a249000 [ 1562.044886] ------------[ cut here ]------------ [ 1562.044920] WARNING: CPU: 0 PID: 18533 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1562.044921] WARN_ON(!wm_changed) [ 1562.044922] Modules linked in: [ 1562.044923] binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 psmouse i2c_algo_bit [ 1562.044947] drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1562.044956] CPU: 0 PID: 18533 Comm: kms_frontbuffer Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1562.044956] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1562.044957] 0000000000000000 ffff8801c90cf8b8 ffffffff813b272c ffff8801c90cf908 [ 1562.044959] 0000000000000000 ffff8801c90cf8f8 ffffffff81079cc1 00000e3f00000000 [ 1562.044960] ffff8801e0b2c000 ffff8801e0b2d000 0000000000000004 ffff8801e017dbd0 [ 1562.044962] Call Trace: [ 1562.044966] [] dump_stack+0x63/0x87 [ 1562.044968] [] __warn+0xd1/0xf0 [ 1562.044970] [] warn_slowpath_fmt+0x4f/0x60 [ 1562.044979] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1562.044987] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1562.045001] [] ? intel_ddi_enable_transcoder_func+0x170/0x240 [i915] [ 1562.045009] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1562.045023] [] haswell_crtc_enable+0x45d/0x900 [i915] [ 1562.045035] [] intel_atomic_commit+0x1386/0x1fc0 [i915] [ 1562.045047] [] ? drm_atomic_set_crtc_for_connector+0x68/0x100 [drm] [ 1562.045055] [] drm_atomic_commit+0x37/0x60 [drm] [ 1562.045060] [] drm_atomic_helper_set_config+0x82/0xc0 [drm_kms_helper] [ 1562.045067] [] drm_mode_set_config_internal+0x67/0x110 [drm] [ 1562.045074] [] drm_mode_setcrtc+0x3f1/0x570 [drm] [ 1562.045079] [] drm_ioctl+0x23b/0x4d0 [drm] [ 1562.045082] [] ? free_pages.part.84+0x40/0x50 [ 1562.045088] [] ? drm_mode_setplane+0x1c0/0x1c0 [drm] [ 1562.045090] [] do_vfs_ioctl+0x96/0x590 [ 1562.045092] [] ? do_munmap+0x281/0x370 [ 1562.045093] [] SyS_ioctl+0x79/0x90 [ 1562.045095] [] do_syscall_64+0x69/0x110 [ 1562.045098] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 1562.045099] ---[ end trace c331dce7e410af16 ]--- [ 1562.045136] [drm:skl_wm_flush_pipe] flush pipe A (pass 1) [ 1562.052562] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1562.052569] [drm:intel_enable_pipe] enabling pipe B [ 1562.052581] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:46:DP-1], [ENCODER:45:TMDS-45] [ 1562.052583] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 32 bytes ELD [ 1562.069354] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1562.069360] [drm:verify_crtc_state] [CRTC:30] [ 1562.069381] [drm:verify_single_dpll_state] DPPL 1 [ 1562.069414] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1562.119317] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1562.186409] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1562.186419] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1562.186465] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1562.236014] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1562.303258] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1562.352685] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1562.419764] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1562.419779] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1562.419817] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1562.469178] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1562.536226] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1562.536231] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1562.536259] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1562.585816] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1562.655316] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1562.655321] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1562.669424] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 1562.669432] [drm:intel_disable_pipe] disabling pipe B [ 1562.680805] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010 [ 1562.680810] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 1562.680827] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 1562.681276] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 1562.681905] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1562.682230] [drm:intel_dp_get_dpcd] EDP DPCD : 02 b7 f6 [ 1562.682233] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1562.682235] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1562.682238] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1562.682239] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1562.688117] [drm:intel_disable_shared_dpll] disable DPPL 1 (active 2, on? 1) for crtc 30 [ 1562.688122] [drm:intel_disable_shared_dpll] disabling DPPL 1 [ 1562.688132] ------------[ cut here ]------------ [ 1562.688154] WARNING: CPU: 3 PID: 30609 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1562.688155] WARN_ON(!wm_changed) [ 1562.688157] Modules linked in: [ 1562.688158] binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 psmouse i2c_algo_bit [ 1562.688195] drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1562.688208] CPU: 3 PID: 30609 Comm: kworker/3:0 Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1562.688209] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1562.688225] Workqueue: events drm_mode_rmfb_work_fn [drm] [ 1562.688227] 0000000000000000 ffff8801e5fd39d0 ffffffff813b272c ffff8801e5fd3a20 [ 1562.688230] 0000000000000000 ffff8801e5fd3a10 ffffffff81079cc1 00000e3f00000000 [ 1562.688232] ffff8801e0b2c000 ffff8801e0b2d000 0000000000000004 ffff8801e017dbd0 [ 1562.688235] Call Trace: [ 1562.688241] [] dump_stack+0x63/0x87 [ 1562.688244] [] __warn+0xd1/0xf0 [ 1562.688246] [] warn_slowpath_fmt+0x4f/0x60 [ 1562.688251] [] ? kmsg_dump_get_buffer+0x40/0x280 [ 1562.688267] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1562.688283] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1562.688305] [] ? chv_write32+0x390/0x390 [i915] [ 1562.688330] [] ? skl_ddi_pll_disable+0x70/0x80 [i915] [ 1562.688344] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1562.688368] [] intel_atomic_commit+0x435/0x1fc0 [i915] [ 1562.688371] [] ? __kmalloc_track_caller+0x19d/0x250 [ 1562.688374] [] ? kmem_cache_alloc_trace+0x187/0x210 [ 1562.688390] [] ? drm_atomic_get_crtc_state+0x36/0xf0 [drm] [ 1562.688404] [] ? drm_atomic_set_crtc_for_connector+0x93/0x100 [drm] [ 1562.688417] [] drm_atomic_commit+0x37/0x60 [drm] [ 1562.688425] [] drm_atomic_helper_set_config+0x82/0xc0 [drm_kms_helper] [ 1562.688437] [] ? drm_modeset_lock_all_ctx+0x97/0xb0 [drm] [ 1562.688450] [] drm_mode_set_config_internal+0x67/0x110 [drm] [ 1562.688475] [] drm_framebuffer_remove+0xed/0x130 [drm] [ 1562.688487] [] drm_mode_rmfb_work_fn+0x41/0x50 [drm] [ 1562.688491] [] process_one_work+0x153/0x3f0 [ 1562.688494] [] worker_thread+0x272/0x4b0 [ 1562.688497] [] ? __schedule+0x330/0x950 [ 1562.688500] [] ? rescuer_thread+0x340/0x340 [ 1562.688503] [] kthread+0xc9/0xe0 [ 1562.688507] [] ret_from_fork+0x22/0x40 [ 1562.688509] [] ? kthread_park+0x60/0x60 [ 1562.688511] ---[ end trace c331dce7e410af17 ]--- [ 1562.688556] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1562.688563] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1562.688565] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1562.688569] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1562.688571] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1562.688572] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1562.688574] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1562.688576] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1562.688579] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1562.688582] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1562.688584] [drm:verify_single_dpll_state] DPLL 0 [ 1562.688587] [drm:verify_single_dpll_state] DPPL 1 [ 1562.688589] [drm:verify_single_dpll_state] DPPL 2 [ 1562.688591] [drm:verify_single_dpll_state] DPPL 3 [ 1562.688596] [drm:intel_power_well_disable] disabling DDI B power well [ 1562.688600] [drm:skl_set_power_well] Disabling DDI B power well [ 1562.688605] [drm:intel_power_well_disable] disabling power well 2 [ 1562.688619] [drm:skl_set_power_well] Disabling power well 2 [ 1562.688625] [drm:verify_crtc_state] [CRTC:30] [ 1562.689786] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1562.689793] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1562.702883] [drm:intel_edp_backlight_off] [ 1562.904339] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1562.904387] [drm:intel_disable_pipe] disabling pipe A [ 1562.921461] [drm:edp_panel_off] Turn eDP port A panel power off [ 1562.921490] [drm:wait_panel_off] Wait for panel power off time [ 1562.921510] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1562.929770] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1562.929779] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1562.929783] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1562.929823] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1562.950666] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1562.950675] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1562.950679] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1562.950721] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1562.974962] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1562.974970] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1562.974975] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1562.975018] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1562.982101] [drm:wait_panel_status] Wait complete [ 1562.982120] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1562.982127] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1562.982169] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1562.982175] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1562.982178] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1562.982181] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1562.982184] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1562.982186] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1562.982190] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1562.982195] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1562.982198] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1562.982201] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1562.982204] [drm:verify_single_dpll_state] DPLL 0 [ 1562.982208] [drm:verify_single_dpll_state] DPPL 1 [ 1562.982212] [drm:verify_single_dpll_state] DPPL 2 [ 1562.982215] [drm:verify_single_dpll_state] DPPL 3 [ 1562.982223] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1562.982229] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1562.982240] [drm:verify_crtc_state] [CRTC:26] [ 1562.982245] [drm:intel_power_well_disable] disabling DC off [ 1562.982253] [drm:skl_enable_dc6] Enabling DC6 [ 1562.982257] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1562.982574] [drm:intel_power_well_disable] disabling always-on [ 1562.988042] kms_frontbuffer_tracking: exiting, ret=99 [ 1562.988162] Setting dangerous option enable_psr - tainting kernel [ 1562.988178] Setting dangerous option enable_fbc - tainting kernel [ 1562.988265] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1562.988267] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1562.988272] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1562.988275] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1562.988278] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1562.988279] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1562.988282] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1562.988286] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88008a24c800 for pipe A [ 1562.988288] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1562.988289] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1562.988293] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1562.988296] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1562.988298] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1562.988300] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1562.988301] [drm:intel_dump_pipe_config] requested mode: [ 1562.988305] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1562.988306] [drm:intel_dump_pipe_config] adjusted mode: [ 1562.988309] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1562.988312] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1562.988313] [drm:intel_dump_pipe_config] port clock: 540000 [ 1562.988315] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1562.988317] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1562.988320] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1562.988322] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1562.988323] [drm:intel_dump_pipe_config] ips: 0 [ 1562.988324] [drm:intel_dump_pipe_config] double wide: 0 [ 1562.988326] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1562.988327] [drm:intel_dump_pipe_config] planes on this crtc [ 1562.988330] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1562.988332] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1562.988334] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1562.988337] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DP-1] checking for sink bpp constrains [ 1562.988338] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1562.988341] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1562.988343] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1562.988346] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1562.988348] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1562.988351] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff88008a248000 for pipe B [ 1562.988352] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1562.988353] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1562.988355] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1562.988358] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1562.988360] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1562.988361] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1562.988362] [drm:intel_dump_pipe_config] requested mode: [ 1562.988365] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1562.988366] [drm:intel_dump_pipe_config] adjusted mode: [ 1562.988370] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1562.988373] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1562.988375] [drm:intel_dump_pipe_config] port clock: 162000 [ 1562.988377] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1562.988378] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1562.988380] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1562.988382] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1562.988383] [drm:intel_dump_pipe_config] ips: 0 [ 1562.988384] [drm:intel_dump_pipe_config] double wide: 0 [ 1562.988386] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 [ 1562.988387] [drm:intel_dump_pipe_config] planes on this crtc [ 1562.988389] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = -1 [ 1562.988393] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 enabled [ 1562.988396] [drm:intel_dump_pipe_config] FB:95, fb = 64x64 format = 0x34325241 [ 1562.988396] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0 [ 1562.988398] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1562.988403] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1562.988406] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1562.988411] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1562.988412] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1562.988414] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1562.988416] [drm:intel_find_shared_dpll] CRTC:30 allocated DPPL 1 [ 1562.988418] [drm:intel_reference_shared_dpll] using DPPL 1 for pipe B [ 1562.988419] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1562.988431] [drm:intel_power_well_enable] enabling always-on [ 1562.988432] [drm:intel_power_well_enable] enabling DC off [ 1562.988638] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1562.988648] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1562.988653] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1562.988657] [drm:intel_power_well_enable] enabling power well 2 [ 1562.988661] [drm:skl_set_power_well] Enabling power well 2 [ 1562.988676] [drm:intel_power_well_enable] enabling DDI B power well [ 1562.988680] [drm:skl_set_power_well] Enabling DDI B power well [ 1562.988686] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1562.988687] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1562.988689] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1562.988690] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1562.988691] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1562.988693] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1562.988695] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1562.988700] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1562.988702] [drm:verify_single_dpll_state] DPLL 0 [ 1562.988705] [drm:verify_single_dpll_state] DPPL 1 [ 1562.988708] [drm:verify_single_dpll_state] DPPL 2 [ 1562.988710] [drm:verify_single_dpll_state] DPPL 3 [ 1562.988714] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1562.988716] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1562.988762] [drm:edp_panel_on] Turn eDP port A panel power on [ 1562.988770] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1563.528174] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1563.568215] [drm:wait_panel_status] Wait complete [ 1563.568238] [drm:wait_panel_on] Wait for panel power on [ 1563.568254] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1563.630152] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1563.630153] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1563.630154] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1563.630165] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1563.769536] [drm:wait_panel_status] Wait complete [ 1563.769558] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1563.769607] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1563.770738] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1563.770740] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1563.770742] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1563.771412] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1563.772380] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1563.772552] [drm:skylake_pfit_enable] for crtc_state = ffff88008a24c800 [ 1563.773496] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1563.773504] [drm:intel_enable_pipe] enabling pipe A [ 1563.773522] [drm:intel_edp_backlight_on] [ 1563.773524] [drm:intel_panel_enable_backlight] pipe A [ 1563.773564] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1563.776213] [drm:intel_psr_match_conditions] PSR disable by flag [ 1563.776215] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1563.776247] [drm:intel_enable_shared_dpll] enable DPPL 1 (active 2, on? 0) for crtc 30 [ 1563.776249] [drm:intel_enable_shared_dpll] enabling DPPL 1 [ 1563.779400] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1563.779402] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1563.779404] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1563.780002] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1563.782951] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1563.783099] [drm:skylake_pfit_enable] for crtc_state = ffff88008a248000 [ 1563.784022] ------------[ cut here ]------------ [ 1563.784071] WARNING: CPU: 0 PID: 18533 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1563.784073] WARN_ON(!wm_changed) [ 1563.784135] Modules linked in: binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 [ 1563.784149] psmouse i2c_algo_bit drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1563.784154] CPU: 0 PID: 18533 Comm: kms_frontbuffer Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1563.784155] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1563.784160] 0000000000000000 ffff8801c90cf698 ffffffff813b272c ffff8801c90cf6e8 [ 1563.784163] 0000000000000000 ffff8801c90cf6d8 ffffffff81079cc1 00000e3f00000000 [ 1563.784166] ffff8801e0b2c000 ffff8801e0b2d000 0000000000000004 ffff8801e017dbd0 [ 1563.784166] Call Trace: [ 1563.784176] [] dump_stack+0x63/0x87 [ 1563.784181] [] __warn+0xd1/0xf0 [ 1563.784184] [] warn_slowpath_fmt+0x4f/0x60 [ 1563.784216] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1563.784246] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1563.784294] [] ? intel_ddi_enable_transcoder_func+0x170/0x240 [i915] [ 1563.784323] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1563.784369] [] haswell_crtc_enable+0x45d/0x900 [i915] [ 1563.784412] [] ? intel_finish_crtc_commit+0xe/0x10 [i915] [ 1563.784427] [] ? drm_atomic_helper_commit_planes_on_crtc+0x169/0x230 [drm_kms_helper] [ 1563.784470] [] intel_atomic_commit+0x1386/0x1fc0 [i915] [ 1563.784475] [] ? __ww_mutex_lock_slowpath+0x16e/0x184 [ 1563.784509] [] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm] [ 1563.784537] [] drm_atomic_commit+0x37/0x60 [drm] [ 1563.784550] [] restore_fbdev_mode+0x22d/0x260 [drm_kms_helper] [ 1563.784576] [] ? drm_modeset_lock_all_ctx+0x97/0xb0 [drm] [ 1563.784589] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [ 1563.784599] [] drm_fb_helper_set_par+0x2c/0x50 [drm_kms_helper] [ 1563.784645] [] intel_fbdev_set_par+0x1a/0x60 [i915] [ 1563.784651] [] fb_set_var+0x191/0x400 [ 1563.784656] [] ? legitimize_mnt+0x16/0x40 [ 1563.784662] [] fbcon_blank+0x1bc/0x2b0 [ 1563.784669] [] do_unblank_screen+0xb8/0x1c0 [ 1563.784672] [] vt_ioctl+0x1053/0x10d0 [ 1563.784676] [] tty_ioctl+0x397/0xbb0 [ 1563.784680] [] do_vfs_ioctl+0x96/0x590 [ 1563.784683] [] SyS_ioctl+0x79/0x90 [ 1563.784688] [] do_syscall_64+0x69/0x110 [ 1563.784693] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 1563.784695] ---[ end trace c331dce7e410af18 ]--- [ 1563.784756] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1563.784764] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1563.784779] [drm:intel_enable_pipe] enabling pipe B [ 1563.784800] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:46:DP-1], [ENCODER:45:TMDS-45] [ 1563.784803] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 32 bytes ELD [ 1563.801536] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1563.801543] [drm:verify_crtc_state] [CRTC:26] [ 1563.801576] [drm:verify_single_dpll_state] DPLL 0 [ 1563.801590] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1563.801597] [drm:verify_crtc_state] [CRTC:30] [ 1563.801627] [drm:verify_single_dpll_state] DPPL 1 [ 1563.801713] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1563.801716] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1563.801827] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1563.801829] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1563.813849] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1563.813858] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1563.953661] drm_read: executing [ 1563.953825] [drm:i915_gem_open] [ 1563.953961] [drm:i915_gem_open] [ 1563.954109] drm_read: starting subtest short-buffer-block [ 1563.954229] drm_read: exiting, ret=0 [ 1563.954708] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1563.954713] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1564.082152] kms_frontbuffer_tracking: executing [ 1564.082208] [drm:i915_gem_open] [ 1564.083204] [drm:i915_gem_open] [ 1564.083543] [drm:drm_mode_addfb2] [FB:95] [ 1564.083570] [drm:drm_mode_addfb2] [FB:104] [ 1564.083584] [drm:drm_mode_addfb2] [FB:108] [ 1564.083596] [drm:drm_mode_addfb2] [FB:109] [ 1564.083610] [drm:drm_mode_addfb2] [FB:114] [ 1564.083622] [drm:drm_mode_addfb2] [FB:115] [ 1564.083632] [drm:drm_mode_addfb2] [FB:120] [ 1564.083644] [drm:drm_mode_addfb2] [FB:121] [ 1564.124759] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1564.124765] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1564.124777] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1564.190732] kms_frontbuffer_tracking: starting subtest fbcpsr-1p-primscrn-spr-indfb-draw-mmap-cpu [ 1564.190791] Setting dangerous option enable_fbc - tainting kernel [ 1564.190802] Setting dangerous option enable_psr - tainting kernel [ 1564.190808] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1564.190816] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1564.190817] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1564.207062] [drm:intel_edp_backlight_off] [ 1564.408207] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1564.408257] [drm:intel_disable_pipe] disabling pipe A [ 1564.424410] [drm:edp_panel_off] Turn eDP port A panel power off [ 1564.424439] [drm:wait_panel_off] Wait for panel power off time [ 1564.424458] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000 [ 1564.435245] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1564.435256] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1564.435261] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1564.435297] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1564.456091] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1564.456097] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1564.456101] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1564.456126] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1564.477661] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1564.477666] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1564.477668] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1564.477684] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1564.484200] [drm:wait_panel_status] Wait complete [ 1564.484209] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1564.484213] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1564.484218] ------------[ cut here ]------------ [ 1564.484238] WARNING: CPU: 1 PID: 18901 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1564.484239] WARN_ON(!wm_changed) [ 1564.484240] Modules linked in: [ 1564.484241] binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 psmouse i2c_algo_bit [ 1564.484266] drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1564.484274] CPU: 1 PID: 18901 Comm: kms_frontbuffer Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1564.484275] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1564.484276] 0000000000000000 ffff88008bd33930 ffffffff813b272c ffff88008bd33980 [ 1564.484278] 0000000000000000 ffff88008bd33970 ffffffff81079cc1 00000e3f00000000 [ 1564.484279] ffff8801e0b2d000 ffff8801e0b2c000 0000000000000004 ffff8801e017dbd0 [ 1564.484281] Call Trace: [ 1564.484285] [] dump_stack+0x63/0x87 [ 1564.484288] [] __warn+0xd1/0xf0 [ 1564.484289] [] warn_slowpath_fmt+0x4f/0x60 [ 1564.484292] [] ? kmsg_dump_get_buffer+0x40/0x280 [ 1564.484302] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1564.484311] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1564.484319] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1564.484333] [] intel_atomic_commit+0x435/0x1fc0 [i915] [ 1564.484335] [] ? kmem_cache_alloc_trace+0x187/0x210 [ 1564.484341] [] ? drm_atomic_helper_connector_duplicate_state+0x35/0x80 [drm_kms_helper] [ 1564.484352] [] ? drm_atomic_get_crtc_state+0x36/0xf0 [drm] [ 1564.484360] [] ? drm_atomic_set_crtc_for_connector+0x93/0x100 [drm] [ 1564.484367] [] drm_atomic_commit+0x37/0x60 [drm] [ 1564.484371] [] drm_atomic_helper_set_config+0x82/0xc0 [drm_kms_helper] [ 1564.484378] [] drm_mode_set_config_internal+0x67/0x110 [drm] [ 1564.484386] [] drm_mode_setcrtc+0x3f1/0x570 [drm] [ 1564.484387] [] ? _kstrtoull+0x2c/0x70 [ 1564.484393] [] drm_ioctl+0x23b/0x4d0 [drm] [ 1564.484395] [] ? param_set_int+0x14/0x20 [ 1564.484402] [] ? drm_mode_setplane+0x1c0/0x1c0 [drm] [ 1564.484404] [] do_vfs_ioctl+0x96/0x590 [ 1564.484405] [] SyS_ioctl+0x79/0x90 [ 1564.484407] [] do_syscall_64+0x69/0x110 [ 1564.484410] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 1564.484411] ---[ end trace c331dce7e410af19 ]--- [ 1564.484449] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1564.484455] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1564.484457] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1564.484458] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1564.484459] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1564.484460] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1564.484461] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1564.484462] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1564.484464] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1564.484467] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1564.484469] [drm:verify_single_dpll_state] DPLL 0 [ 1564.484471] [drm:verify_single_dpll_state] DPPL 1 [ 1564.484473] [drm:verify_single_dpll_state] DPPL 2 [ 1564.484474] [drm:verify_single_dpll_state] DPPL 3 [ 1564.484477] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1564.484480] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1564.484485] [drm:verify_crtc_state] [CRTC:26] [ 1564.484506] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1564.484514] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1564.484515] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1564.484841] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 1564.484849] [drm:intel_disable_pipe] disabling pipe B [ 1564.502461] [drm:intel_disable_shared_dpll] disable DPPL 1 (active 2, on? 1) for crtc 30 [ 1564.502466] [drm:intel_disable_shared_dpll] disabling DPPL 1 [ 1564.502493] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1564.502496] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1564.502498] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1564.502499] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1564.502501] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1564.502514] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1564.502516] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1564.502517] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1564.502519] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1564.502522] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1564.502523] [drm:verify_single_dpll_state] DPLL 0 [ 1564.502526] [drm:verify_single_dpll_state] DPPL 1 [ 1564.502527] [drm:verify_single_dpll_state] DPPL 2 [ 1564.502529] [drm:verify_single_dpll_state] DPPL 3 [ 1564.502533] [drm:intel_power_well_disable] disabling DDI B power well [ 1564.502537] [drm:skl_set_power_well] Disabling DDI B power well [ 1564.502540] [drm:intel_power_well_disable] disabling power well 2 [ 1564.502552] [drm:skl_set_power_well] Disabling power well 2 [ 1564.502558] [drm:verify_crtc_state] [CRTC:30] [ 1564.502559] [drm:intel_power_well_disable] disabling DC off [ 1564.502563] [drm:skl_enable_dc6] Enabling DC6 [ 1564.502565] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1564.502878] [drm:intel_power_well_disable] disabling always-on [ 1564.502896] [drm:drm_mode_setcrtc] [CRTC:34:crtc-2] [ 1564.502966] [drm:drm_mode_addfb2] [FB:96] [ 1564.518557] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1564.518562] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1564.518571] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1564.518572] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1564.518575] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1564.518576] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1564.518578] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1564.518578] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1564.518580] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1564.518581] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8801e2685000 for pipe A [ 1564.518582] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1564.518583] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1564.518584] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1564.518585] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1564.518586] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1564.518587] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1564.518587] [drm:intel_dump_pipe_config] requested mode: [ 1564.518589] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1564.518590] [drm:intel_dump_pipe_config] adjusted mode: [ 1564.518591] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1564.518592] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1564.518593] [drm:intel_dump_pipe_config] port clock: 540000 [ 1564.518594] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1564.518594] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1564.518595] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1564.518596] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1564.518597] [drm:intel_dump_pipe_config] ips: 0 [ 1564.518597] [drm:intel_dump_pipe_config] double wide: 0 [ 1564.518598] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1564.518599] [drm:intel_dump_pipe_config] planes on this crtc [ 1564.518600] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1564.518601] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1564.518602] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1564.518605] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1564.518607] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1564.518608] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1564.518609] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1564.520035] [drm:intel_power_well_enable] enabling always-on [ 1564.520036] [drm:intel_power_well_enable] enabling DC off [ 1564.520038] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1564.520044] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1564.520046] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1564.520050] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1564.520051] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1564.520052] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1564.520053] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1564.520053] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1564.520054] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1564.520055] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1564.520056] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1564.520057] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1564.520058] [drm:verify_single_dpll_state] DPLL 0 [ 1564.520060] [drm:verify_single_dpll_state] DPPL 1 [ 1564.520061] [drm:verify_single_dpll_state] DPPL 2 [ 1564.520063] [drm:verify_single_dpll_state] DPPL 3 [ 1564.520065] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1564.520066] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1564.520096] [drm:edp_panel_on] Turn eDP port A panel power on [ 1564.520104] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1565.028399] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1565.068859] [drm:wait_panel_status] Wait complete [ 1565.068890] [drm:wait_panel_on] Wait for panel power on [ 1565.068910] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1565.130791] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1565.130801] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1565.130805] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1565.130851] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1565.281087] [drm:wait_panel_status] Wait complete [ 1565.281112] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1565.281162] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1565.282314] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1565.282321] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1565.282324] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1565.282992] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1565.283958] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1565.284130] [drm:skylake_pfit_enable] for crtc_state = ffff8801e2685000 [ 1565.285131] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1565.285141] [drm:intel_enable_pipe] enabling pipe A [ 1565.285160] [drm:intel_edp_backlight_on] [ 1565.285163] [drm:intel_panel_enable_backlight] pipe A [ 1565.285204] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1565.288251] [drm:intel_psr_match_conditions] PSR disable by flag [ 1565.288257] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1565.301902] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1565.301911] [drm:verify_crtc_state] [CRTC:26] [ 1565.301944] [drm:verify_single_dpll_state] DPLL 0 [ 1565.301981] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1565.352116] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1565.418991] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1565.419025] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1565.419032] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1565.435236] [drm:intel_edp_backlight_off] [ 1565.532303] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010 [ 1565.532306] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 1565.532313] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 1565.532753] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 1565.533373] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1565.533695] [drm:intel_dp_get_dpcd] EDP DPCD : 02 b7 f6 [ 1565.533697] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1565.533699] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1565.533700] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1565.533701] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1565.636228] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1565.636268] [drm:intel_disable_pipe] disabling pipe A [ 1565.653189] [drm:edp_panel_off] Turn eDP port A panel power off [ 1565.653213] [drm:wait_panel_off] Wait for panel power off time [ 1565.653242] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1565.660906] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1565.660909] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1565.660910] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1565.681789] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1565.681793] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1565.681795] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1565.703689] [drm:wait_panel_status] Wait complete [ 1565.703704] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1565.703709] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1565.703746] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1565.703751] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1565.703754] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1565.703756] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1565.703758] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1565.703760] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1565.703763] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1565.703767] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1565.703770] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1565.703772] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1565.703775] [drm:verify_single_dpll_state] DPLL 0 [ 1565.703778] [drm:verify_single_dpll_state] DPPL 1 [ 1565.703781] [drm:verify_single_dpll_state] DPPL 2 [ 1565.703784] [drm:verify_single_dpll_state] DPPL 3 [ 1565.703790] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1565.703795] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1565.703804] [drm:verify_crtc_state] [CRTC:26] [ 1565.703837] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1565.703860] [drm:drm_mode_setcrtc] [CRTC:34:crtc-2] [ 1565.703907] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1565.703919] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1565.706644] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1565.706650] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1565.706653] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1566.256439] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1566.276682] [drm:wait_panel_status] Wait complete [ 1566.276729] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008 [ 1566.276740] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled [ 1566.338528] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1566.338537] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1566.338540] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1566.480576] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1566.482221] [drm:drm_mode_addfb2] [FB:96] [ 1566.482233] [drm:drm_mode_addfb2] [FB:103] [ 1566.482243] [drm:drm_mode_addfb2] [FB:126] [ 1566.482254] [drm:drm_mode_addfb2] [FB:127] [ 1566.560458] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1566.560463] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1566.560473] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1566.560474] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1566.560477] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1566.560478] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1566.560480] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1566.560480] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1566.560482] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1566.560483] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8801e26be800 for pipe A [ 1566.560484] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1566.560485] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1566.560486] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1566.560487] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1566.560488] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1566.560489] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1566.560490] [drm:intel_dump_pipe_config] requested mode: [ 1566.560491] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1566.560492] [drm:intel_dump_pipe_config] adjusted mode: [ 1566.560493] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1566.560495] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1566.560495] [drm:intel_dump_pipe_config] port clock: 540000 [ 1566.560496] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1566.560497] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1566.560498] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1566.560499] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1566.560499] [drm:intel_dump_pipe_config] ips: 0 [ 1566.560500] [drm:intel_dump_pipe_config] double wide: 0 [ 1566.560501] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1566.560501] [drm:intel_dump_pipe_config] planes on this crtc [ 1566.560502] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1566.560504] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1566.560505] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1566.560507] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1566.560509] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1566.560510] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1566.560511] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1566.561540] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1566.561543] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1566.561546] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1566.561547] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1566.561548] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1566.561549] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1566.561550] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1566.561550] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1566.561552] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1566.561553] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1566.561554] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1566.561555] [drm:verify_single_dpll_state] DPLL 0 [ 1566.561557] [drm:verify_single_dpll_state] DPPL 1 [ 1566.561558] [drm:verify_single_dpll_state] DPPL 2 [ 1566.561559] [drm:verify_single_dpll_state] DPPL 3 [ 1566.561561] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1566.561562] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1566.561593] [drm:edp_panel_on] Turn eDP port A panel power on [ 1566.561600] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1566.561616] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [ 1566.561623] [drm:wait_panel_status] Wait complete [ 1566.561646] [drm:wait_panel_on] Wait for panel power on [ 1566.561662] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [ 1566.763289] [drm:wait_panel_status] Wait complete [ 1566.764470] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1566.764477] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1566.764480] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1566.765150] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1566.766116] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1566.766288] [drm:skylake_pfit_enable] for crtc_state = ffff8801e26be800 [ 1566.767236] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1566.767244] [drm:intel_enable_pipe] enabling pipe A [ 1566.767260] [drm:intel_edp_backlight_on] [ 1566.767263] [drm:intel_panel_enable_backlight] pipe A [ 1566.767304] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1566.768287] [drm:intel_psr_match_conditions] PSR disable by flag [ 1566.768297] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1566.783999] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1566.784008] [drm:verify_crtc_state] [CRTC:26] [ 1566.784042] [drm:verify_single_dpll_state] DPLL 0 [ 1566.784080] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1566.834176] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1566.901053] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1566.901073] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1566.901098] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1566.917514] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1566.967509] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1567.034299] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1567.034310] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1567.034332] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1567.050693] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1567.100846] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1567.167633] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1567.167643] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1567.167666] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1567.184026] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1567.234183] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1567.301076] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1567.301103] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1567.301108] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1567.317483] [drm:intel_edp_backlight_off] [ 1567.520244] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1567.520284] [drm:intel_disable_pipe] disabling pipe A [ 1567.534623] [drm:edp_panel_off] Turn eDP port A panel power off [ 1567.534647] [drm:wait_panel_off] Wait for panel power off time [ 1567.534663] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000 [ 1567.539819] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1567.539823] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1567.539824] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1567.539864] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1567.560672] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1567.560676] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1567.560678] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1567.560715] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1567.587861] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1567.587865] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1567.587867] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1567.587882] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1567.592256] [drm:wait_panel_status] Wait complete [ 1567.592265] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1567.592269] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1567.592295] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1567.592297] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1567.592298] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1567.592299] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1567.592300] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1567.592300] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1567.592302] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1567.592303] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1567.592304] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1567.592305] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1567.592306] [drm:verify_single_dpll_state] DPLL 0 [ 1567.592308] [drm:verify_single_dpll_state] DPPL 1 [ 1567.592310] [drm:verify_single_dpll_state] DPPL 2 [ 1567.592311] [drm:verify_single_dpll_state] DPPL 3 [ 1567.592314] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1567.592318] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1567.592322] [drm:verify_crtc_state] [CRTC:26] [ 1567.592324] [drm:intel_power_well_disable] disabling DC off [ 1567.592328] [drm:skl_enable_dc6] Enabling DC6 [ 1567.592329] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1567.592641] [drm:intel_power_well_disable] disabling always-on [ 1567.592656] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1567.592666] [drm:drm_mode_setcrtc] [CRTC:34:crtc-2] [ 1567.599045] Setting dangerous option enable_fbc - tainting kernel [ 1567.599054] Setting dangerous option enable_psr - tainting kernel [ 1567.635849] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1567.635854] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1567.635863] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1567.635864] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1567.635867] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1567.635868] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1567.635870] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1567.635870] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1567.635872] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1567.635873] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88008a24f000 for pipe A [ 1567.635874] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1567.635875] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1567.635876] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1567.635877] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1567.635878] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1567.635879] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1567.635879] [drm:intel_dump_pipe_config] requested mode: [ 1567.635881] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1567.635882] [drm:intel_dump_pipe_config] adjusted mode: [ 1567.635883] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1567.635884] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1567.635885] [drm:intel_dump_pipe_config] port clock: 540000 [ 1567.635885] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1567.635886] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1567.635887] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1567.635888] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1567.635889] [drm:intel_dump_pipe_config] ips: 0 [ 1567.635889] [drm:intel_dump_pipe_config] double wide: 0 [ 1567.635890] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1567.635891] [drm:intel_dump_pipe_config] planes on this crtc [ 1567.635892] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1567.635893] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1567.635894] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1567.635897] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1567.635899] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1567.635900] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1567.635901] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1567.636935] [drm:intel_power_well_enable] enabling always-on [ 1567.636936] [drm:intel_power_well_enable] enabling DC off [ 1567.637140] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1567.637146] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1567.637149] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1567.637152] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1567.637153] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1567.637155] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1567.637155] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1567.637156] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1567.637157] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1567.637158] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1567.637159] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1567.637160] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1567.637161] [drm:verify_single_dpll_state] DPLL 0 [ 1567.637163] [drm:verify_single_dpll_state] DPPL 1 [ 1567.637164] [drm:verify_single_dpll_state] DPPL 2 [ 1567.637165] [drm:verify_single_dpll_state] DPPL 3 [ 1567.637168] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1567.637168] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1567.637199] [drm:edp_panel_on] Turn eDP port A panel power on [ 1567.637207] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1568.140478] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1568.176709] [drm:wait_panel_status] Wait complete [ 1568.176740] [drm:wait_panel_on] Wait for panel power on [ 1568.176760] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1568.238658] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1568.238666] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1568.238670] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1568.238711] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1568.393334] [drm:wait_panel_status] Wait complete [ 1568.393359] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1568.393409] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1568.394561] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1568.394567] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1568.394570] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1568.395238] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1568.396205] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1568.396647] [drm:skylake_pfit_enable] for crtc_state = ffff88008a24f000 [ 1568.397595] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1568.397604] [drm:intel_enable_pipe] enabling pipe A [ 1568.397620] [drm:intel_edp_backlight_on] [ 1568.397623] [drm:intel_panel_enable_backlight] pipe A [ 1568.397664] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1568.400517] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1568.400528] [drm:intel_fbc_alloc_cfb] reserved 23040000 bytes of contiguous stolen space for FBC, threshold: 1 [ 1568.400530] [drm:intel_fbc_enable] Enabling FBC on pipe A [ 1568.414381] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1568.414397] [drm:verify_crtc_state] [CRTC:26] [ 1568.414437] [drm:verify_single_dpll_state] DPLL 0 [ 1568.414483] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1568.464335] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1568.531419] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1568.581000] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1568.648232] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:27] scaler_user index 0.2 [ 1568.664440] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1568.681179] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1568.731205] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1568.798263] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1568.847876] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1568.914929] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1568.964588] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.031601] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1569.081218] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.148191] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1569.197891] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.264964] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1569.314563] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.381529] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1569.431034] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.498107] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1569.547721] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.614970] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1569.664595] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.731600] [drm:pipe_crc_set_source] collecting CRCs for pipe A, pf [ 1569.781304] [drm:pipe_crc_set_source] stopping CRCs for pipe A [ 1569.848766] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1569.848774] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:27] scaler_user index 0.2 [ 1569.848779] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1569.864570] [drm:intel_edp_backlight_off] [ 1570.068472] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1570.068519] [drm:intel_disable_pipe] disabling pipe A [ 1570.081249] [drm:edp_panel_off] Turn eDP port A panel power off [ 1570.081278] [drm:wait_panel_off] Wait for panel power off time [ 1570.081297] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000 [ 1570.086854] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1570.086863] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1570.086867] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1570.086908] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1570.107722] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1570.107731] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1570.107735] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1570.107775] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1570.134686] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1570.134695] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1570.134699] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1570.134741] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1570.141842] [drm:wait_panel_status] Wait complete [ 1570.141859] [drm:__intel_fbc_disable] Disabling FBC on pipe A [ 1570.141866] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1570.141873] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1570.141915] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1570.141921] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1570.141924] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1570.141927] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1570.141929] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1570.141932] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1570.141935] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1570.141941] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1570.141943] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1570.141946] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1570.141949] [drm:verify_single_dpll_state] DPLL 0 [ 1570.141954] [drm:verify_single_dpll_state] DPPL 1 [ 1570.141958] [drm:verify_single_dpll_state] DPPL 2 [ 1570.141961] [drm:verify_single_dpll_state] DPPL 3 [ 1570.141968] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1570.141975] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1570.141986] [drm:verify_crtc_state] [CRTC:26] [ 1570.141991] [drm:intel_power_well_disable] disabling DC off [ 1570.141998] [drm:skl_enable_dc6] Enabling DC6 [ 1570.142002] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1570.142319] [drm:intel_power_well_disable] disabling always-on [ 1570.147655] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:27] scaler_user index 0.2 [ 1570.147944] kms_frontbuffer_tracking: exiting, ret=0 [ 1570.147978] Setting dangerous option enable_psr - tainting kernel [ 1570.147983] Setting dangerous option enable_fbc - tainting kernel [ 1570.148013] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1570.148014] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1570.148016] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1570.148016] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1570.148018] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1570.148018] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1570.148019] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1570.148020] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88008a22b000 for pipe A [ 1570.148020] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1570.148021] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1570.148021] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1570.148022] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1570.148023] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1570.148023] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1570.148024] [drm:intel_dump_pipe_config] requested mode: [ 1570.148025] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1570.148025] [drm:intel_dump_pipe_config] adjusted mode: [ 1570.148026] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1570.148027] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1570.148027] [drm:intel_dump_pipe_config] port clock: 540000 [ 1570.148028] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1570.148028] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1570.148029] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1570.148029] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1570.148029] [drm:intel_dump_pipe_config] ips: 0 [ 1570.148030] [drm:intel_dump_pipe_config] double wide: 0 [ 1570.148030] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1570.148030] [drm:intel_dump_pipe_config] planes on this crtc [ 1570.148031] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1570.148032] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1570.148032] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1570.148033] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DP-1] checking for sink bpp constrains [ 1570.148033] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1570.148034] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1570.148035] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1570.148035] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1570.148036] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1570.148036] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff88008a229800 for pipe B [ 1570.148037] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1570.148037] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1570.148037] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1570.148038] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1570.148039] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1570.148039] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1570.148039] [drm:intel_dump_pipe_config] requested mode: [ 1570.148040] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1570.148041] [drm:intel_dump_pipe_config] adjusted mode: [ 1570.148041] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1570.148042] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1570.148043] [drm:intel_dump_pipe_config] port clock: 162000 [ 1570.148043] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1570.148043] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1570.148044] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1570.148044] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1570.148045] [drm:intel_dump_pipe_config] ips: 0 [ 1570.148045] [drm:intel_dump_pipe_config] double wide: 0 [ 1570.148045] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 [ 1570.148046] [drm:intel_dump_pipe_config] planes on this crtc [ 1570.148046] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = -1 [ 1570.148047] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 1570.148047] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1570.148048] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1570.148049] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1570.148051] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1570.148051] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1570.148052] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1570.148052] [drm:intel_find_shared_dpll] CRTC:30 allocated DPPL 1 [ 1570.148053] [drm:intel_reference_shared_dpll] using DPPL 1 for pipe B [ 1570.148053] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1570.148057] [drm:intel_power_well_enable] enabling always-on [ 1570.148057] [drm:intel_power_well_enable] enabling DC off [ 1570.148306] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1570.148312] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1570.148315] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1570.148316] [drm:intel_power_well_enable] enabling power well 2 [ 1570.148318] [drm:skl_set_power_well] Enabling power well 2 [ 1570.148345] [drm:intel_power_well_enable] enabling DDI B power well [ 1570.148347] [drm:skl_set_power_well] Enabling DDI B power well [ 1570.148349] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1570.148350] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1570.148352] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1570.148353] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1570.148354] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1570.148355] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1570.148356] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1570.148358] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1570.148359] [drm:verify_single_dpll_state] DPLL 0 [ 1570.148361] [drm:verify_single_dpll_state] DPPL 1 [ 1570.148363] [drm:verify_single_dpll_state] DPPL 2 [ 1570.148365] [drm:verify_single_dpll_state] DPPL 3 [ 1570.148367] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1570.148368] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1570.148399] [drm:edp_panel_on] Turn eDP port A panel power on [ 1570.148406] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1570.688326] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 1570.688335] [drm:wait_panel_status] Wait complete [ 1570.688358] [drm:wait_panel_on] Wait for panel power on [ 1570.688375] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1570.750245] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1570.750248] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1570.750250] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1570.750345] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1570.890295] [drm:wait_panel_status] Wait complete [ 1570.890316] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1570.890364] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1570.891517] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1570.891519] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1570.891520] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1570.892190] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1570.893160] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1570.893332] [drm:skylake_pfit_enable] for crtc_state = ffff88008a22b000 [ 1570.894277] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1570.894284] [drm:intel_enable_pipe] enabling pipe A [ 1570.894302] [drm:intel_edp_backlight_on] [ 1570.894303] [drm:intel_panel_enable_backlight] pipe A [ 1570.894343] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1570.896386] [drm:intel_psr_match_conditions] PSR disable by flag [ 1570.896388] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1570.896420] [drm:intel_enable_shared_dpll] enable DPPL 1 (active 2, on? 0) for crtc 30 [ 1570.896422] [drm:intel_enable_shared_dpll] enabling DPPL 1 [ 1570.899574] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1570.899575] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1570.899577] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1570.900175] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1570.903122] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1570.903272] [drm:skylake_pfit_enable] for crtc_state = ffff88008a229800 [ 1570.904166] ------------[ cut here ]------------ [ 1570.904201] WARNING: CPU: 0 PID: 18901 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1570.904203] WARN_ON(!wm_changed) [ 1570.904244] Modules linked in: binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 [ 1570.904258] psmouse i2c_algo_bit drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1570.904262] CPU: 0 PID: 18901 Comm: kms_frontbuffer Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1570.904264] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1570.904268] 0000000000000000 ffff88008bd33698 ffffffff813b272c ffff88008bd336e8 [ 1570.904271] 0000000000000000 ffff88008bd336d8 ffffffff81079cc1 00000e3f00000000 [ 1570.904273] ffff8801e0b2c000 ffff8801e0b2d000 0000000000000004 ffff8801e017dbd0 [ 1570.904274] Call Trace: [ 1570.904283] [] dump_stack+0x63/0x87 [ 1570.904287] [] __warn+0xd1/0xf0 [ 1570.904290] [] warn_slowpath_fmt+0x4f/0x60 [ 1570.904318] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1570.904344] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1570.904388] [] ? intel_ddi_enable_transcoder_func+0x170/0x240 [i915] [ 1570.904413] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1570.904455] [] haswell_crtc_enable+0x45d/0x900 [i915] [ 1570.904494] [] ? intel_finish_crtc_commit+0xe/0x10 [i915] [ 1570.904507] [] ? drm_atomic_helper_commit_planes_on_crtc+0x169/0x230 [drm_kms_helper] [ 1570.904547] [] intel_atomic_commit+0x1386/0x1fc0 [i915] [ 1570.904552] [] ? __ww_mutex_lock_slowpath+0x16e/0x184 [ 1570.904582] [] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm] [ 1570.904606] [] drm_atomic_commit+0x37/0x60 [drm] [ 1570.904618] [] restore_fbdev_mode+0x22d/0x260 [drm_kms_helper] [ 1570.904642] [] ? drm_modeset_lock_all_ctx+0x97/0xb0 [drm] [ 1570.904654] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [ 1570.904663] [] drm_fb_helper_set_par+0x2c/0x50 [drm_kms_helper] [ 1570.904721] [] intel_fbdev_set_par+0x1a/0x60 [i915] [ 1570.904728] [] fb_set_var+0x191/0x400 [ 1570.904733] [] ? legitimize_mnt+0x16/0x40 [ 1570.904738] [] fbcon_blank+0x1bc/0x2b0 [ 1570.904745] [] do_unblank_screen+0xb8/0x1c0 [ 1570.904748] [] vt_ioctl+0x1053/0x10d0 [ 1570.904752] [] tty_ioctl+0x397/0xbb0 [ 1570.904756] [] do_vfs_ioctl+0x96/0x590 [ 1570.904759] [] SyS_ioctl+0x79/0x90 [ 1570.904764] [] do_syscall_64+0x69/0x110 [ 1570.904769] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 1570.904787] ---[ end trace c331dce7e410af1a ]--- [ 1570.904848] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1570.904855] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1570.904869] [drm:intel_enable_pipe] enabling pipe B [ 1570.904922] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:46:DP-1], [ENCODER:45:TMDS-45] [ 1570.904924] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 32 bytes ELD [ 1570.921660] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1570.921667] [drm:verify_crtc_state] [CRTC:26] [ 1570.921697] [drm:verify_single_dpll_state] DPLL 0 [ 1570.921710] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1570.921716] [drm:verify_crtc_state] [CRTC:30] [ 1570.921744] [drm:verify_single_dpll_state] DPPL 1 [ 1570.921789] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1570.921791] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1570.921903] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1570.921905] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1570.932461] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1570.932474] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1571.059565] gem_exec_whisper: executing [ 1571.059626] [drm:i915_gem_open] [ 1571.060628] [drm:i915_gem_open] [ 1571.060846] gem_exec_whisper: starting subtest render-interruptible [ 1573.900399] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 1573.900462] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007 [ 1620.750086] gem_exec_whisper: exiting, ret=0 [ 1620.750735] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1620.750740] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1620.856788] gem_exec_suspend: executing [ 1620.856851] [drm:i915_gem_open] [ 1620.857685] [drm:i915_gem_open] [ 1620.857873] gem_exec_suspend: starting subtest blt-uncached-S4 [ 1620.976056] PM: Syncing filesystems ... done. [ 1620.984130] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1620.985767] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 1620.985771] PM: Marking nosave pages: [mem 0x00058000-0x00058fff] [ 1620.985774] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] [ 1620.985780] PM: Marking nosave pages: [mem 0x8c80a000-0x8c80cfff] [ 1620.985782] PM: Marking nosave pages: [mem 0x8ca09000-0x8d2fefff] [ 1620.985872] PM: Marking nosave pages: [mem 0x8d300000-0xffffffff] [ 1620.988152] PM: Basic memory bitmaps created [ 1620.988299] PM: Preallocating image memory... done (allocated 223924 pages) [ 1621.113789] PM: Allocated 895696 kbytes in 0.12 seconds (7464.13 MB/s) [ 1621.113790] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1621.233644] Suspending console(s) (use no_console_suspend to debug) [ 1621.233656] calling input10+ @ 21838, parent: card0 [ 1621.233658] call input10+ returned 0 after 0 usecs [ 1621.233661] calling input9+ @ 21838, parent: card0 [ 1621.233663] call input9+ returned 0 after 0 usecs [ 1621.233675] calling xhci-hcd.1.auto+ @ 21838, parent: dwc3.0.auto [ 1621.233677] call xhci-hcd.1.auto+ returned 0 after 0 usecs [ 1621.233691] calling coretemp.0+ @ 21838, parent: platform [ 1621.233693] call coretemp.0+ returned 0 after 0 usecs [ 1621.233708] calling dwc3.0.auto+ @ 21838, parent: 0000:00:14.1 [ 1621.233713] call dwc3.0.auto+ returned 0 after 3 usecs [ 1621.233722] calling hdaudioC0D0+ @ 13342, parent: 0000:00:1f.3 [ 1621.233724] calling input8+ @ 21838, parent: 0003:046D:C03D.0001 [ 1621.233726] call input8+ returned 0 after 0 usecs [ 1621.233756] calling input7+ @ 21838, parent: LNXVIDEO:00 [ 1621.233757] call input7+ returned 0 after 0 usecs [ 1621.233761] calling 1-2+ @ 173, parent: usb1 [ 1621.233763] calling intel_backlight+ @ 21838, parent: card0-eDP-1 [ 1621.233767] call intel_backlight+ returned 0 after 2 usecs [ 1621.233772] calling card0-HDMI-A-2+ @ 21838, parent: card0 [ 1621.233774] call 1-2+ returned 0 after 8 usecs [ 1621.233780] calling 1:0:0:0+ @ 173, parent: target1:0:0 [ 1621.233785] call 1:0:0:0+ returned 0 after 3 usecs [ 1621.233787] call card0-HDMI-A-2+ returned 0 after 11 usecs [ 1621.233789] calling target1:0:0+ @ 173, parent: host1 [ 1621.233791] calling card0-HDMI-A-1+ @ 21838, parent: card0 [ 1621.233793] call target1:0:0+ returned 0 after 0 usecs [ 1621.233794] call card0-HDMI-A-1+ returned 0 after 0 usecs [ 1621.233798] calling card0-DP-1+ @ 21838, parent: card0 [ 1621.233799] call card0-DP-1+ returned 0 after 0 usecs [ 1621.233803] calling card0-eDP-1+ @ 21838, parent: card0 [ 1621.233804] call card0-eDP-1+ returned 0 after 0 usecs [ 1621.233809] calling card0+ @ 21838, parent: 0000:00:02.0 [ 1621.233812] call card0+ returned 0 after 0 usecs [ 1621.233814] calling renderD128+ @ 21838, parent: 0000:00:02.0 [ 1621.233816] call renderD128+ returned 0 after 0 usecs [ 1621.233825] calling controlD64+ @ 21838, parent: 0000:00:02.0 [ 1621.233827] call controlD64+ returned 0 after 0 usecs [ 1621.233834] calling mmc1::+ @ 21838, parent: 0000:00:1e.6 [ 1621.233836] call mmc1::+ returned 0 after 0 usecs [ 1621.233842] calling mmc0::+ @ 21838, parent: 0000:00:1e.4 [ 1621.233843] call mmc0::+ returned 0 after 0 usecs [ 1621.233855] calling host1+ @ 21839, parent: ata2 [ 1621.233856] call host1+ returned 0 after 0 usecs [ 1621.233862] calling host0+ @ 21839, parent: ata1 [ 1621.233863] call host0+ returned 0 after 0 usecs [ 1621.233865] calling ata2+ @ 20562, parent: 0000:00:17.0 [ 1621.233876] calling ata1+ @ 173, parent: 0000:00:17.0 [ 1621.233900] calling microcode+ @ 21838, parent: platform [ 1621.233901] call microcode+ returned 0 after 0 usecs [ 1621.233909] calling input4::scrolllock+ @ 21838, parent: input4 [ 1621.233911] call input4::scrolllock+ returned 0 after 0 usecs [ 1621.233914] calling input4::capslock+ @ 21838, parent: input4 [ 1621.233916] call input4::capslock+ returned 0 after 0 usecs [ 1621.233918] calling input4::numlock+ @ 21838, parent: input4 [ 1621.233919] call input4::numlock+ returned 0 after 0 usecs [ 1621.233922] calling input4+ @ 21838, parent: serio0 [ 1621.233924] call input4+ returned 0 after 0 usecs [ 1621.233927] calling rtc0+ @ 21838, parent: 00:04 [ 1621.233929] call rtc0+ returned 0 after 0 usecs [ 1621.233939] calling i8042+ @ 21838, parent: platform [ 1621.233941] call i8042+ returned 0 after 0 usecs [ 1621.233946] calling Fixed MDIO bus.0+ @ 21838, parent: platform [ 1621.233947] call Fixed MDIO bus.0+ returned 0 after 0 usecs [ 1621.234025] calling serial8250+ @ 21838, parent: platform [ 1621.234029] call serial8250+ returned 0 after 1 usecs [ 1621.234044] calling input3+ @ 21838, parent: LNXPWRBN:00 [ 1621.234046] call input3+ returned 0 after 0 usecs [ 1621.234049] calling input2+ @ 21838, parent: PNP0C0E:00 [ 1621.234051] call input2+ returned 0 after 0 usecs [ 1621.234053] calling input1+ @ 21838, parent: PNP0C0C:00 [ 1621.234054] call input1+ returned 0 after 0 usecs [ 1621.234057] calling input0+ @ 21838, parent: PNP0C0D:00 [ 1621.234058] call input0+ returned 0 after 0 usecs [ 1621.234078] calling alarmtimer+ @ 21838, parent: platform [ 1621.234080] call alarmtimer+ returned 0 after 0 usecs [ 1621.234085] calling platform-framebuffer.0+ @ 21838, parent: platform [ 1621.234087] call platform-framebuffer.0+ returned 0 after 0 usecs [ 1621.234090] calling pcspkr+ @ 21838, parent: platform [ 1621.234091] call pcspkr+ returned 0 after 0 usecs [ 1621.234139] call ata1+ returned 0 after 254 usecs [ 1621.234151] calling 00:0b+ @ 21838, parent: pnp0 [ 1621.234154] call 00:0b+ returned 0 after 1 usecs [ 1621.234156] call ata2+ returned 0 after 281 usecs [ 1621.234157] calling usb2+ @ 173, parent: 0000:00:14.0 [ 1621.234159] calling 00:0a+ @ 21838, parent: pnp0 [ 1621.234161] call usb2+ returned 0 after 0 usecs [ 1621.234162] call 00:0a+ returned 0 after 0 usecs [ 1621.234165] calling 00:09+ @ 21838, parent: pnp0 [ 1621.234166] call 00:09+ returned 0 after 0 usecs [ 1621.234169] calling 00:08+ @ 21838, parent: pnp0 [ 1621.234170] call 00:08+ returned 0 after 0 usecs [ 1621.234172] calling 00:07+ @ 21838, parent: pnp0 [ 1621.234174] call 00:07+ returned 0 after 0 usecs [ 1621.234177] calling 00:06+ @ 21838, parent: pnp0 [ 1621.234188] calling usb1+ @ 173, parent: 0000:00:14.0 [ 1621.234204] call 00:06+ returned 0 after 24 usecs [ 1621.234206] calling 00:05+ @ 21838, parent: pnp0 [ 1621.234208] call 00:05+ returned 0 after 0 usecs [ 1621.234210] calling 00:04+ @ 21838, parent: pnp0 [ 1621.234250] call 00:04+ returned 0 after 37 usecs [ 1621.234252] calling 00:03+ @ 21838, parent: pnp0 [ 1621.234253] call 00:03+ returned 0 after 0 usecs [ 1621.234254] calling 00:02+ @ 21838, parent: pnp0 [ 1621.234256] call 00:02+ returned 0 after 0 usecs [ 1621.234257] calling 00:01+ @ 21838, parent: pnp0 [ 1621.234260] call 00:01+ returned 0 after 1 usecs [ 1621.234261] calling 00:00+ @ 21838, parent: pnp0 [ 1621.234262] call 00:00+ returned 0 after 0 usecs [ 1621.234270] call usb1+ returned 0 after 78 usecs [ 1621.234272] calling LNXPWRBN:00+ @ 21838, parent: LNXSYSTM:00 [ 1621.234276] call LNXPWRBN:00+ returned 0 after 2 usecs [ 1621.234278] calling PNP0C0B:04+ @ 21838, parent: platform [ 1621.234280] call PNP0C0B:04+ returned 0 after 1 usecs [ 1621.234282] calling PNP0C0B:03+ @ 21838, parent: platform [ 1621.234283] call PNP0C0B:03+ returned 0 after 0 usecs [ 1621.234285] calling PNP0C0B:02+ @ 21838, parent: platform [ 1621.234286] call PNP0C0B:02+ returned 0 after 0 usecs [ 1621.234287] calling PNP0C0B:01+ @ 21838, parent: platform [ 1621.234289] call PNP0C0B:01+ returned 0 after 0 usecs [ 1621.234290] calling PNP0C0B:00+ @ 21838, parent: platform [ 1621.242643] call PNP0C0B:00+ returned 0 after 8155 usecs [ 1621.242646] calling INT3400:00+ @ 21838, parent: platform [ 1621.242648] call INT3400:00+ returned 0 after 0 usecs [ 1621.242650] calling INT33A1:00+ @ 21838, parent: platform [ 1621.242651] call INT33A1:00+ returned 0 after 0 usecs [ 1621.242653] calling ACPI000C:00+ @ 21838, parent: platform [ 1621.242654] call ACPI000C:00+ returned 0 after 0 usecs [ 1621.242656] calling PNP0C14:00+ @ 21838, parent: platform [ 1621.242657] call PNP0C14:00+ returned 0 after 0 usecs [ 1621.242659] calling PNP0C0E:00+ @ 21838, parent: platform [ 1621.242660] call PNP0C0E:00+ returned 0 after 0 usecs [ 1621.242662] calling INT33D5:00+ @ 21838, parent: platform [ 1621.242663] call INT33D5:00+ returned 0 after 0 usecs [ 1621.242665] calling PNP0C0C:00+ @ 21838, parent: platform [ 1621.242666] call PNP0C0C:00+ returned 0 after 0 usecs [ 1621.242667] calling ACPI0003:00+ @ 21838, parent: platform [ 1621.242668] call ACPI0003:00+ returned 0 after 0 usecs [ 1621.242670] calling INT3402:00+ @ 21838, parent: pci0000:00 [ 1621.242671] call INT3402:00+ returned 0 after 0 usecs [ 1621.242672] calling INT3447:00+ @ 21838, parent: pci0000:00 [ 1621.242673] call INT3447:00+ returned 0 after 0 usecs [ 1621.242675] calling INT344B:00+ @ 21838, parent: pci0000:00 [ 1621.242677] call INT344B:00+ returned 0 after 0 usecs [ 1621.242679] calling PNP0103:00+ @ 21838, parent: 0000:00:1f.0 [ 1621.242680] call PNP0103:00+ returned 0 after 0 usecs [ 1621.242682] calling INT0800:00+ @ 21838, parent: 0000:00:1f.0 [ 1621.242683] call INT0800:00+ returned 0 after 0 usecs [ 1621.242685] calling INT3404:01+ @ 21838, parent: PNP0C09:00 [ 1621.242686] call INT3404:01+ returned 0 after 0 usecs [ 1621.242688] calling INT3404:00+ @ 21838, parent: PNP0C09:00 [ 1621.242689] call INT3404:00+ returned 0 after 0 usecs [ 1621.242691] calling PNP0C0D:00+ @ 21838, parent: PNP0C09:00 [ 1621.242692] call PNP0C0D:00+ returned 0 after 0 usecs [ 1621.242693] calling INT33D6:00+ @ 21838, parent: PNP0C09:00 [ 1621.242694] call INT33D6:00+ returned 0 after 0 usecs [ 1621.242696] calling PNP0C0A:02+ @ 21838, parent: PNP0C09:00 [ 1621.242697] call PNP0C0A:02+ returned 0 after 0 usecs [ 1621.242698] calling PNP0C0A:01+ @ 21838, parent: PNP0C09:00 [ 1621.242699] call PNP0C0A:01+ returned 0 after 0 usecs [ 1621.242701] calling PNP0C0A:00+ @ 21838, parent: PNP0C09:00 [ 1621.242702] call PNP0C0A:00+ returned 0 after 0 usecs [ 1621.242704] calling PNP0C09:00+ @ 21838, parent: 0000:00:1f.0 [ 1621.242705] call PNP0C09:00+ returned 0 after 0 usecs [ 1621.242721] calling 0000:01:00.0+ @ 173, parent: 0000:00:1c.0 [ 1621.242741] calling LNXTHERM:01+ @ 21838, parent: LNXSYBUS:01 [ 1621.242744] call LNXTHERM:01+ returned 0 after 1 usecs [ 1621.242746] calling LNXTHERM:00+ @ 21838, parent: LNXSYBUS:01 [ 1621.242761] call LNXTHERM:00+ returned 0 after 9 usecs [ 1621.242768] calling 0000:00:1f.6+ @ 21840, parent: pci0000:00 [ 1621.242789] calling PNP0C0E:00+ @ 21838, parent: LNXSYBUS:00 [ 1621.242791] call PNP0C0E:00+ returned 0 after 0 usecs [ 1621.242794] calling 0000:00:1f.4+ @ 21839, parent: pci0000:00 [ 1621.242796] call 0000:00:1f.4+ returned 0 after 0 usecs [ 1621.242798] calling PNP0C0C:00+ @ 21838, parent: LNXSYBUS:00 [ 1621.242799] call PNP0C0C:00+ returned 0 after 0 usecs [ 1621.242828] calling dock.0+ @ 21838, parent: platform [ 1621.242829] call dock.0+ returned 0 after 0 usecs [ 1621.242853] calling 0000:00:1f.2+ @ 20562, parent: pci0000:00 [ 1621.242855] call 0000:00:1f.2+ returned 0 after 0 usecs [ 1621.242860] calling 0000:00:1f.0+ @ 20562, parent: pci0000:00 [ 1621.242862] call 0000:00:1f.0+ returned 0 after 0 usecs [ 1621.242866] calling 0000:00:1e.6+ @ 20562, parent: pci0000:00 [ 1621.242868] call 0000:00:1e.6+ returned 0 after 0 usecs [ 1621.242872] calling 0000:00:1e.4+ @ 20562, parent: pci0000:00 [ 1621.242873] call 0000:00:1e.4+ returned 0 after 0 usecs [ 1621.242875] calling 0000:00:1e.3+ @ 20562, parent: pci0000:00 [ 1621.242876] call 0000:00:1e.3+ returned 0 after 0 usecs [ 1621.242878] calling 0000:00:1e.2+ @ 20562, parent: pci0000:00 [ 1621.242880] call 0000:00:1e.2+ returned 0 after 0 usecs [ 1621.242882] calling 0000:00:1e.1+ @ 20562, parent: pci0000:00 [ 1621.242883] call 0000:00:1e.1+ returned 0 after 0 usecs [ 1621.242885] calling 0000:00:1e.0+ @ 20562, parent: pci0000:00 [ 1621.242886] call 0000:00:1e.0+ returned 0 after 0 usecs [ 1621.242912] calling 0000:00:19.0+ @ 21841, parent: pci0000:00 [ 1621.242914] call 0000:00:19.0+ returned 0 after 0 usecs [ 1621.242917] calling 0000:00:17.0+ @ 21841, parent: pci0000:00 [ 1621.242921] call 0000:00:17.0+ returned 0 after 2 usecs [ 1621.242925] calling 0000:00:16.4+ @ 21841, parent: pci0000:00 [ 1621.242926] call 0000:00:16.4+ returned 0 after 0 usecs [ 1621.242933] calling 0000:00:16.0+ @ 21841, parent: pci0000:00 [ 1621.242946] calling 0000:00:15.3+ @ 21842, parent: pci0000:00 [ 1621.242948] call 0000:00:15.3+ returned 0 after 0 usecs [ 1621.242951] calling 0000:00:15.2+ @ 21842, parent: pci0000:00 [ 1621.242953] call 0000:00:15.2+ returned 0 after 0 usecs [ 1621.242956] calling 0000:00:15.1+ @ 21842, parent: pci0000:00 [ 1621.242958] call 0000:00:15.1+ returned 0 after 0 usecs [ 1621.242961] calling 0000:00:15.0+ @ 21842, parent: pci0000:00 [ 1621.242963] call 0000:00:15.0+ returned 0 after 0 usecs [ 1621.242966] calling 0000:00:14.2+ @ 21842, parent: pci0000:00 [ 1621.242968] call 0000:00:14.2+ returned 0 after 0 usecs [ 1621.242971] calling 0000:00:14.1+ @ 21842, parent: pci0000:00 [ 1621.242978] call 0000:00:14.1+ returned 0 after 5 usecs [ 1621.242982] calling 0000:00:14.0+ @ 21842, parent: pci0000:00 [ 1621.242985] call 0000:00:14.0+ returned 0 after 0 usecs [ 1621.242988] calling 0000:00:08.0+ @ 21842, parent: pci0000:00 [ 1621.242989] call 0000:00:08.0+ returned 0 after 0 usecs [ 1621.242994] calling 0000:00:04.0+ @ 21842, parent: pci0000:00 [ 1621.242998] call 0000:00:04.0+ returned 0 after 3 usecs [ 1621.243002] calling 0000:00:02.0+ @ 21842, parent: pci0000:00 [ 1621.243007] [drm:intel_power_well_enable] enabling DDI C power well [ 1621.243014] [drm:skl_set_power_well] Enabling DDI C power well [ 1621.243017] [drm:intel_power_well_enable] enabling DDI D power well [ 1621.243021] [drm:skl_set_power_well] Enabling DDI D power well [ 1621.243094] calling PNP0C0D:00+ @ 21838, parent: PNP0C09:00 [ 1621.243095] call PNP0C0D:00+ returned 0 after 0 usecs [ 1621.243159] calling reg-dummy+ @ 21838, parent: platform [ 1621.243161] call reg-dummy+ returned 0 after 1 usecs [ 1621.243374] calling 0000:00:00.0+ @ 21843, parent: pci0000:00 [ 1621.243376] call 0000:00:00.0+ returned 0 after 0 usecs [ 1621.243520] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1621.243522] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1621.243528] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1621.243531] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1621.243535] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1621.243537] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1621.243541] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1621.243545] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8801e2684800 for pipe A [ 1621.243548] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1621.243550] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1621.243553] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.243556] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1621.243560] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1621.243562] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1621.243563] [drm:intel_dump_pipe_config] requested mode: [ 1621.243568] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1621.243569] [drm:intel_dump_pipe_config] adjusted mode: [ 1621.243574] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1621.243578] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1621.243580] [drm:intel_dump_pipe_config] port clock: 540000 [ 1621.243583] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1621.243586] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1621.243589] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1621.243591] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1621.243593] [drm:intel_dump_pipe_config] ips: 0 [ 1621.243595] [drm:intel_dump_pipe_config] double wide: 0 [ 1621.243597] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1621.243599] [drm:intel_dump_pipe_config] planes on this crtc [ 1621.243600] call 0000:00:16.0+ returned 0 after 648 usecs [ 1621.243606] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 1621.243610] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1621.243611] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800 [ 1621.243614] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1621.243616] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1621.243620] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DP-1] checking for sink bpp constrains [ 1621.243622] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1621.243624] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1621.243627] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1621.243628] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1621.243630] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1621.243633] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff8801e2683000 for pipe B [ 1621.243634] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1621.243635] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1621.243637] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.243640] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1621.243642] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1621.243643] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1621.243644] [drm:intel_dump_pipe_config] requested mode: [ 1621.243647] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1621.243648] [drm:intel_dump_pipe_config] adjusted mode: [ 1621.243651] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1621.243654] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1621.243655] [drm:intel_dump_pipe_config] port clock: 162000 [ 1621.243656] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1621.243658] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1621.243659] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1621.243661] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1621.243662] [drm:intel_dump_pipe_config] ips: 0 [ 1621.243663] [drm:intel_dump_pipe_config] double wide: 0 [ 1621.243665] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 [ 1621.243665] [drm:intel_dump_pipe_config] planes on this crtc [ 1621.243669] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 enabled [ 1621.243672] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1621.243672] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 1621.243674] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 1621.243675] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1621.243681] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1621.243684] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1621.243688] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1621.243689] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1621.243691] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1621.243693] [drm:intel_find_shared_dpll] CRTC:30 allocated DPPL 1 [ 1621.243695] [drm:intel_reference_shared_dpll] using DPPL 1 for pipe B [ 1621.243696] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1621.245844] [drm:intel_edp_backlight_off] [ 1621.249994] call hdaudioC0D0+ returned 0 after 15885 usecs [ 1621.250040] calling 0000:00:1f.3+ @ 21839, parent: pci0000:00 [ 1621.251201] call 0000:00:1f.3+ returned 0 after 1130 usecs [ 1621.263139] call 0000:01:00.0+ returned 0 after 19935 usecs [ 1621.263158] calling 0000:00:1c.0+ @ 20562, parent: pci0000:00 [ 1621.263165] call 0000:00:1c.0+ returned 0 after 4 usecs [ 1621.263258] call 0000:00:1f.6+ returned 0 after 20007 usecs [ 1621.449724] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1621.449767] [drm:intel_disable_pipe] disabling pipe A [ 1621.462727] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1621.462776] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1621.462966] [drm:edp_panel_off] Turn eDP port A panel power off [ 1621.462990] [drm:wait_panel_off] Wait for panel power off time [ 1621.463007] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1621.473099] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1621.473102] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1621.473104] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1621.473134] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1621.493969] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1621.493972] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1621.493974] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1621.494004] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1621.516390] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1621.516393] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1621.516395] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1621.516425] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1621.523639] [drm:wait_panel_status] Wait complete [ 1621.523654] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1621.523659] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1621.523726] [drm:skl_wm_flush_pipe] flush pipe B (pass 2) [ 1621.531264] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun [ 1621.547746] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 1621.547758] [drm:intel_disable_pipe] disabling pipe B [ 1621.565151] [drm:intel_disable_shared_dpll] disable DPPL 1 (active 2, on? 1) for crtc 30 [ 1621.565157] [drm:intel_disable_shared_dpll] disabling DPPL 1 [ 1621.565171] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1621.565173] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1621.565175] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1621.565177] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1621.565178] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1621.565179] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1621.565184] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1621.565188] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1621.565192] [drm:verify_single_dpll_state] DPLL 0 [ 1621.565195] [drm:verify_single_dpll_state] DPPL 1 [ 1621.565198] [drm:verify_single_dpll_state] DPPL 2 [ 1621.565200] [drm:verify_single_dpll_state] DPPL 3 [ 1621.565207] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1621.565211] [drm:verify_crtc_state] [CRTC:26] [ 1621.565217] [drm:verify_single_dpll_state] DPLL 0 [ 1621.565223] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1621.565226] [drm:verify_crtc_state] [CRTC:30] [ 1621.565232] [drm:verify_single_dpll_state] DPPL 1 [ 1621.569643] [drm:intel_power_well_disable] disabling DDI D power well [ 1621.569650] [drm:skl_set_power_well] Disabling DDI D power well [ 1621.569655] [drm:intel_power_well_disable] disabling DDI C power well [ 1621.569659] [drm:skl_set_power_well] Disabling DDI C power well [ 1621.569664] [drm:intel_power_well_disable] disabling DDI B power well [ 1621.569668] [drm:skl_set_power_well] Disabling DDI B power well [ 1621.569673] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1621.569677] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1621.569682] [drm:intel_power_well_disable] disabling power well 2 [ 1621.569699] [drm:skl_set_power_well] Disabling power well 2 [ 1621.569704] [drm:intel_power_well_disable] disabling DC off [ 1621.569709] [drm:skl_enable_dc6] Enabling DC6 [ 1621.569713] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1621.570025] [drm:intel_power_well_disable] disabling always-on [ 1621.570029] call 0000:00:02.0+ returned 0 after 319352 usecs [ 1621.570124] PM: freeze of devices complete after 336.461 msecs [ 1621.570533] calling INT344B:00+ @ 21838, parent: pci0000:00 [ 1621.574333] call INT344B:00+ returned 0 after 3709 usecs [ 1621.574432] calling 0000:00:02.0+ @ 21840, parent: pci0000:00 [ 1621.574638] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1621.574665] [drm:intel_power_well_disable] disabling MISC IO power well [ 1621.574677] [drm:skl_set_power_well] Disabling MISC IO power well [ 1621.574688] [drm:gen9_sanitize_power_well_requests] Clearing auxiliary requests for MISC IO power well forced on by DMC [ 1621.574697] [drm:intel_power_well_disable] disabling power well 1 [ 1621.574715] [drm:gen9_sanitize_power_well_requests] Clearing auxiliary requests for power well 1 forced on by DMC [ 1621.589718] call 0000:00:02.0+ returned 0 after 14922 usecs [ 1621.589886] PM: late freeze of devices complete after 19.756 msecs [ 1621.590393] calling 0000:01:00.0+ @ 21840, parent: 0000:00:1c.0 [ 1621.590398] calling 0000:00:1f.6+ @ 21842, parent: pci0000:00 [ 1621.590403] calling 0000:00:1f.4+ @ 21843, parent: pci0000:00 [ 1621.590544] call 0000:00:1f.4+ returned 0 after 136 usecs [ 1621.590552] calling 0000:00:1f.3+ @ 20562, parent: pci0000:00 [ 1621.590566] call 0000:00:1f.6+ returned 0 after 160 usecs [ 1621.590570] calling 0000:00:1f.2+ @ 21842, parent: pci0000:00 [ 1621.590574] calling 0000:00:1f.0+ @ 21839, parent: pci0000:00 [ 1621.590622] call 0000:01:00.0+ returned 0 after 219 usecs [ 1621.590627] calling 0000:00:1e.6+ @ 21840, parent: pci0000:00 [ 1621.590698] call 0000:00:1f.2+ returned 0 after 124 usecs [ 1621.590702] calling 0000:00:1e.4+ @ 21842, parent: pci0000:00 [ 1621.590712] call 0000:00:1f.0+ returned 0 after 133 usecs [ 1621.590714] calling 0000:00:1e.3+ @ 21839, parent: pci0000:00 [ 1621.590841] call 0000:00:1e.6+ returned 0 after 207 usecs [ 1621.590847] calling 0000:00:1e.2+ @ 21840, parent: pci0000:00 [ 1621.591104] call 0000:00:1e.4+ returned 0 after 391 usecs [ 1621.591111] calling 0000:00:1e.1+ @ 21842, parent: pci0000:00 [ 1621.591172] call 0000:00:1e.3+ returned 0 after 446 usecs [ 1621.591177] calling 0000:00:1e.0+ @ 21839, parent: pci0000:00 [ 1621.591534] call 0000:00:1e.2+ returned 0 after 669 usecs [ 1621.591541] calling 0000:00:1c.0+ @ 21840, parent: pci0000:00 [ 1621.591813] call 0000:00:1e.1+ returned 0 after 684 usecs [ 1621.591818] calling 0000:00:19.0+ @ 21842, parent: pci0000:00 [ 1621.591854] call 0000:00:1e.0+ returned 0 after 660 usecs [ 1621.591859] calling 0000:00:17.0+ @ 21839, parent: pci0000:00 [ 1621.592129] call 0000:00:19.0+ returned 0 after 302 usecs [ 1621.592133] calling 0000:00:16.4+ @ 21842, parent: pci0000:00 [ 1621.592137] call 0000:00:17.0+ returned 0 after 270 usecs [ 1621.592145] calling 0000:00:16.0+ @ 21839, parent: pci0000:00 [ 1621.592168] call 0000:00:1c.0+ returned 0 after 610 usecs [ 1621.592172] calling 0000:00:15.3+ @ 21840, parent: pci0000:00 [ 1621.592345] call 0000:00:16.4+ returned 0 after 205 usecs [ 1621.592350] calling 0000:00:15.2+ @ 21842, parent: pci0000:00 [ 1621.592388] call 0000:00:16.0+ returned 0 after 236 usecs [ 1621.592393] calling 0000:00:15.1+ @ 21839, parent: pci0000:00 [ 1621.592664] call 0000:00:15.3+ returned 0 after 479 usecs [ 1621.592669] calling 0000:00:15.0+ @ 21840, parent: pci0000:00 [ 1621.593151] call 0000:00:15.2+ returned 0 after 780 usecs [ 1621.593156] calling 0000:00:14.2+ @ 21842, parent: pci0000:00 [ 1621.593207] call 0000:00:15.1+ returned 0 after 793 usecs [ 1621.593212] calling 0000:00:14.1+ @ 21839, parent: pci0000:00 [ 1621.593309] call 0000:00:15.0+ returned 0 after 623 usecs [ 1621.593314] calling 0000:00:14.0+ @ 21840, parent: pci0000:00 [ 1621.593366] call 0000:00:14.2+ returned 0 after 203 usecs [ 1621.593371] calling 0000:00:08.0+ @ 21842, parent: pci0000:00 [ 1621.593375] call 0000:00:14.1+ returned 0 after 158 usecs [ 1621.593379] calling 0000:00:04.0+ @ 21839, parent: pci0000:00 [ 1621.593409] call 0000:00:14.0+ returned 0 after 91 usecs [ 1621.593415] calling 0000:00:02.0+ @ 21840, parent: pci0000:00 [ 1621.593418] call 0000:00:02.0+ returned 0 after 0 usecs [ 1621.593422] calling 0000:00:00.0+ @ 21840, parent: pci0000:00 [ 1621.593440] call 0000:00:08.0+ returned 0 after 65 usecs [ 1621.593448] call 0000:00:04.0+ returned 0 after 66 usecs [ 1621.593461] call 0000:00:00.0+ returned 0 after 37 usecs [ 1621.605844] call 0000:00:1f.3+ returned 0 after 14931 usecs [ 1621.605857] PM: noirq freeze of devices complete after 15.967 msecs [ 1621.606689] ACPI: Preparing to enter system sleep state S4 [ 1621.613851] ACPI : EC: EC stopped [ 1621.613852] PM: Saving platform NVS memory [ 1621.615319] Disabling non-boot CPUs ... [ 1621.616835] smpboot: CPU 1 is now offline [ 1621.631620] smpboot: CPU 2 is now offline [ 1621.646381] Broke affinity for irq 122 [ 1621.646403] Broke affinity for irq 275 [ 1621.646407] Broke affinity for irq 276 [ 1621.647472] smpboot: CPU 3 is now offline [ 1621.662132] PM: Calling kvm_suspend+0x0/0x30 [kvm] [ 1621.662138] PM: Calling mce_syscore_suspend+0x0/0x20 [ 1621.662144] PM: Calling ledtrig_cpu_syscore_suspend+0x0/0x20 [ 1621.662151] PM: Calling timekeeping_suspend+0x0/0x270 [ 1621.662253] PM: Calling irq_gc_suspend+0x0/0x60 [ 1621.662258] PM: Calling save_ioapic_entries+0x0/0x90 [ 1621.663475] PM: Calling i8259A_suspend+0x0/0x30 [ 1621.663488] PM: Calling fw_suspend+0x0/0x20 [ 1621.663492] PM: Calling acpi_save_bm_rld+0x0/0x1e [ 1621.663499] PM: Calling lapic_suspend+0x0/0x1d0 [ 1621.663513] PM: Creating hibernation image: [ 1621.759662] PM: Need to copy 221978 pages [ 1621.759663] PM: Normal pages needed: 221978 + 1024, available pages: 1328644 [ 1621.664353] PM: Restoring platform NVS memory [ 1621.664533] ACPI : EC: EC started [ 1621.664536] PM: Calling bsp_resume+0x0/0x20 [ 1621.664539] PM: Calling lapic_resume+0x0/0x2b0 [ 1621.664573] PM: Calling acpi_restore_bm_rld+0x0/0x36 [ 1621.664575] PM: Calling irqrouter_resume+0x0/0x3d [ 1621.664577] PM: Calling i8259A_resume+0x0/0x30 [ 1621.664758] PM: Calling i8237A_resume+0x0/0xa0 [ 1621.664900] PM: Calling ioapic_resume+0x0/0xb0 [ 1621.665142] PM: Calling irq_gc_resume+0x0/0x60 [ 1621.665143] PM: Calling irq_pm_syscore_resume+0x0/0x20 [ 1621.665162] PM: Calling timekeeping_resume+0x0/0x1e0 [ 1621.665282] PM: Calling ledtrig_cpu_syscore_resume+0x0/0x20 [ 1621.665283] PM: Calling mce_syscore_resume+0x0/0x30 [ 1621.665304] PM: Calling mc_bp_resume+0x0/0x50 [ 1621.665317] PM: Calling kvm_resume+0x0/0x40 [kvm] [ 1621.665327] Enabling non-boot CPUs ... [ 1621.680647] x86: Booting SMP configuration: [ 1621.680648] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1621.683278] cache: parent cpu1 should not be sleeping [ 1621.683363] CPU1 is up [ 1621.700668] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 1621.703323] cache: parent cpu2 should not be sleeping [ 1621.703410] CPU2 is up [ 1621.740701] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1621.743312] cache: parent cpu3 should not be sleeping [ 1621.743389] CPU3 is up [ 1621.746985] ACPI: Waking up from system sleep state S4 [ 1621.782482] acpi LNXPOWER:1e: Turning OFF [ 1621.782532] acpi LNXPOWER:1d: Turning OFF [ 1621.782578] acpi LNXPOWER:1c: Turning OFF [ 1621.783351] acpi LNXPOWER:1a: Turning OFF [ 1621.783914] calling 0000:00:02.0+ @ 20562, parent: pci0000:00 [ 1621.783915] calling 0000:00:00.0+ @ 21840, parent: pci0000:00 [ 1621.783925] calling 0000:00:08.0+ @ 173, parent: pci0000:00 [ 1621.783928] call 0000:00:00.0+ returned 0 after 12 usecs [ 1621.783930] calling 0000:00:14.0+ @ 21840, parent: pci0000:00 [ 1621.783949] call 0000:00:08.0+ returned 0 after 23 usecs [ 1621.783950] calling 0000:00:14.1+ @ 173, parent: pci0000:00 [ 1621.783973] call 0000:00:14.0+ returned 0 after 41 usecs [ 1621.783974] calling 0000:00:14.2+ @ 21840, parent: pci0000:00 [ 1621.784020] call 0000:00:14.2+ returned 0 after 44 usecs [ 1621.784021] calling 0000:00:15.0+ @ 21840, parent: pci0000:00 [ 1621.784024] call 0000:00:14.1+ returned 0 after 72 usecs [ 1621.784025] calling 0000:00:15.1+ @ 173, parent: pci0000:00 [ 1621.784031] calling 0000:00:15.2+ @ 21839, parent: pci0000:00 [ 1621.784035] calling 0000:00:15.3+ @ 13342, parent: pci0000:00 [ 1621.784040] calling 0000:00:16.0+ @ 21841, parent: pci0000:00 [ 1621.784044] calling 0000:00:16.4+ @ 21844, parent: pci0000:00 [ 1621.784073] calling 0000:00:17.0+ @ 21845, parent: pci0000:00 [ 1621.784114] call 0000:00:16.0+ returned 0 after 71 usecs [ 1621.784115] calling 0000:00:19.0+ @ 21841, parent: pci0000:00 [ 1621.784121] call 0000:00:16.4+ returned 0 after 74 usecs [ 1621.784122] calling 0000:00:1c.0+ @ 21844, parent: pci0000:00 [ 1621.784131] calling 0000:00:04.0+ @ 21843, parent: pci0000:00 [ 1621.784161] call 0000:00:17.0+ returned 0 after 85 usecs [ 1621.784162] calling 0000:00:1e.0+ @ 21845, parent: pci0000:00 [ 1621.784189] call 0000:00:04.0+ returned 0 after 56 usecs [ 1621.784190] calling 0000:00:1e.1+ @ 21843, parent: pci0000:00 [ 1621.784207] calling 0000:00:1e.2+ @ 21846, parent: pci0000:00 [ 1621.784222] call 0000:00:1c.0+ returned 0 after 96 usecs [ 1621.784224] calling 0000:00:1e.3+ @ 21847, parent: pci0000:00 [ 1621.784233] calling 0000:00:1e.4+ @ 21844, parent: pci0000:00 [ 1621.784241] calling 0000:00:1e.6+ @ 21848, parent: pci0000:00 [ 1621.784296] call 0000:00:1e.4+ returned 0 after 61 usecs [ 1621.784301] calling 0000:00:1f.0+ @ 21844, parent: pci0000:00 [ 1621.784302] call 0000:00:1e.6+ returned 0 after 58 usecs [ 1621.784303] calling 0000:00:1f.2+ @ 21848, parent: pci0000:00 [ 1621.784347] calling 0000:00:1f.3+ @ 21849, parent: pci0000:00 [ 1621.784362] calling 0000:00:1f.4+ @ 21850, parent: pci0000:00 [ 1621.784402] call 0000:00:1f.0+ returned 0 after 97 usecs [ 1621.784403] call 0000:00:1f.2+ returned 0 after 97 usecs [ 1621.784404] calling 0000:00:1f.6+ @ 21848, parent: pci0000:00 [ 1621.784462] call 0000:00:1f.4+ returned 0 after 97 usecs [ 1621.784463] calling 0000:01:00.0+ @ 21850, parent: 0000:00:1c.0 [ 1621.784527] call 0000:00:15.0+ returned 0 after 493 usecs [ 1621.784530] call 0000:00:1f.6+ returned 0 after 122 usecs [ 1621.784589] call 0000:01:00.0+ returned 0 after 122 usecs [ 1621.784679] call 0000:00:15.1+ returned 0 after 637 usecs [ 1621.784764] call 0000:00:15.2+ returned 0 after 715 usecs [ 1621.784815] call 0000:00:15.3+ returned 0 after 760 usecs [ 1621.784866] call 0000:00:19.0+ returned 0 after 731 usecs [ 1621.784915] call 0000:00:1e.0+ returned 0 after 734 usecs [ 1621.784963] call 0000:00:1e.1+ returned 0 after 754 usecs [ 1621.785012] call 0000:00:1e.2+ returned 0 after 785 usecs [ 1621.785051] call 0000:00:1e.3+ returned 0 after 807 usecs [ 1621.796576] call 0000:00:02.0+ returned 0 after 12363 usecs [ 1621.800578] call 0000:00:1f.3+ returned 0 after 15850 usecs [ 1621.800585] PM: noirq restore of devices complete after 16.710 msecs [ 1621.800632] calling 0000:00:02.0+ @ 21849, parent: pci0000:00 [ 1621.800735] calling INT3404:00+ @ 21838, parent: PNP0C09:00 [ 1621.800736] call INT3404:00+ returned 0 after 0 usecs [ 1621.800737] calling INT3404:01+ @ 21838, parent: PNP0C09:00 [ 1621.800737] call INT3404:01+ returned 0 after 0 usecs [ 1621.800738] calling INT344B:00+ @ 21838, parent: pci0000:00 [ 1621.801711] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1621.801727] [drm:gen9_set_dc_state [i915]] *ERROR* DC state mismatch (0x0 -> 0x2) [ 1621.801876] [drm:intel_power_well_enable] enabling power well 1 [ 1621.801965] [drm:intel_power_well_enable] enabling MISC IO power well [ 1621.802026] [drm:skl_set_cdclk] Changing CDCLK to 675000KHz [ 1621.802220] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz [ 1621.805153] call INT344B:00+ returned 0 after 4310 usecs [ 1621.805155] calling INT3400:00+ @ 21838, parent: platform [ 1621.805155] call INT3400:00+ returned 0 after 0 usecs [ 1621.805156] calling PNP0C0B:00+ @ 21838, parent: platform [ 1621.805156] call PNP0C0B:00+ returned 0 after 0 usecs [ 1621.805157] calling PNP0C0B:01+ @ 21838, parent: platform [ 1621.805157] call PNP0C0B:01+ returned 0 after 0 usecs [ 1621.805157] calling PNP0C0B:02+ @ 21838, parent: platform [ 1621.805158] call PNP0C0B:02+ returned 0 after 0 usecs [ 1621.805158] calling PNP0C0B:03+ @ 21838, parent: platform [ 1621.805159] call PNP0C0B:03+ returned 0 after 0 usecs [ 1621.805159] calling PNP0C0B:04+ @ 21838, parent: platform [ 1621.805160] call PNP0C0B:04+ returned 0 after 0 usecs [ 1621.806137] [drm:intel_power_well_enable] enabling always-on [ 1621.806137] [drm:intel_power_well_enable] enabling DC off [ 1621.806138] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1621.806143] [drm:intel_power_well_enable] enabling power well 2 [ 1621.806145] [drm:skl_set_power_well] Enabling power well 2 [ 1621.806157] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1621.806159] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1621.806160] [drm:intel_power_well_enable] enabling DDI B power well [ 1621.806162] [drm:skl_set_power_well] Enabling DDI B power well [ 1621.806163] [drm:intel_power_well_enable] enabling DDI C power well [ 1621.806165] [drm:skl_set_power_well] Enabling DDI C power well [ 1621.806166] [drm:intel_power_well_enable] enabling DDI D power well [ 1621.806167] [drm:skl_set_power_well] Enabling DDI D power well [ 1621.806169] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1621.806188] call 0000:00:02.0+ returned 0 after 5425 usecs [ 1621.806259] PM: early restore of devices complete after 5.642 msecs [ 1621.831360] calling 0000:00:00.0+ @ 21849, parent: pci0000:00 [ 1621.831362] call 0000:00:00.0+ returned 0 after 1 usecs [ 1621.831365] calling 0000:00:02.0+ @ 20562, parent: pci0000:00 [ 1621.831365] calling 0000:00:04.0+ @ 21849, parent: pci0000:00 [ 1621.831368] calling 0000:00:08.0+ @ 21840, parent: pci0000:00 [ 1621.831369] call 0000:00:04.0+ returned 0 after 3 usecs [ 1621.831370] call 0000:00:08.0+ returned 0 after 0 usecs [ 1621.831370] calling 0000:00:14.0+ @ 21849, parent: pci0000:00 [ 1621.831371] calling 0000:00:14.1+ @ 21840, parent: pci0000:00 [ 1621.831385] call 0000:00:14.1+ returned 0 after 13 usecs [ 1621.831388] calling 0000:00:14.2+ @ 21840, parent: pci0000:00 [ 1621.831389] call 0000:00:14.2+ returned 0 after 0 usecs [ 1621.831390] calling 0000:00:15.0+ @ 21840, parent: pci0000:00 [ 1621.831390] call 0000:00:15.0+ returned 0 after 0 usecs [ 1621.831392] calling 0000:00:15.1+ @ 21840, parent: pci0000:00 [ 1621.831393] call 0000:00:15.1+ returned 0 after 0 usecs [ 1621.831394] calling 0000:00:15.2+ @ 21840, parent: pci0000:00 [ 1621.831395] call 0000:00:15.2+ returned 0 after 0 usecs [ 1621.831396] calling 0000:00:15.3+ @ 21840, parent: pci0000:00 [ 1621.831397] calling reg-dummy+ @ 21838, parent: platform [ 1621.831398] call 0000:00:15.3+ returned 0 after 0 usecs [ 1621.831401] call reg-dummy+ returned 0 after 1 usecs [ 1621.831403] usb usb1: root hub lost power or was reset [ 1621.831404] calling 0000:00:16.0+ @ 21840, parent: pci0000:00 [ 1621.831405] usb usb2: root hub lost power or was reset [ 1621.831441] calling PNP0C0A:00+ @ 21838, parent: PNP0C09:00 [ 1621.831649] calling 0000:00:16.4+ @ 21847, parent: pci0000:00 [ 1621.831652] call 0000:00:16.4+ returned 0 after 0 usecs [ 1621.831655] calling 0000:00:17.0+ @ 21847, parent: pci0000:00 [ 1621.831681] calling 0000:00:19.0+ @ 21846, parent: pci0000:00 [ 1621.831685] call 0000:00:19.0+ returned 0 after 2 usecs [ 1621.831688] call 0000:00:17.0+ returned 0 after 31 usecs [ 1621.831690] calling 0000:00:1c.0+ @ 21846, parent: pci0000:00 [ 1621.831698] calling 0000:00:1e.0+ @ 21843, parent: pci0000:00 [ 1621.831699] call 0000:00:1e.0+ returned 0 after 0 usecs [ 1621.831700] call 0000:00:1c.0+ returned 0 after 8 usecs [ 1621.831702] calling 0000:00:1e.1+ @ 21843, parent: pci0000:00 [ 1621.831703] call 0000:00:1e.1+ returned 0 after 0 usecs [ 1621.831704] calling 0000:00:1e.2+ @ 21846, parent: pci0000:00 [ 1621.831706] calling 0000:00:1e.3+ @ 21843, parent: pci0000:00 [ 1621.831707] call 0000:00:1e.2+ returned 0 after 0 usecs [ 1621.831709] call 0000:00:1e.3+ returned 0 after 0 usecs [ 1621.831714] calling 0000:00:1e.4+ @ 21846, parent: pci0000:00 [ 1621.831715] calling 0000:00:1e.6+ @ 21843, parent: pci0000:00 [ 1621.831717] call 0000:00:1e.4+ returned 0 after 1 usecs [ 1621.831719] call 0000:00:1e.6+ returned 0 after 0 usecs [ 1621.831722] calling 0000:00:1f.0+ @ 21846, parent: pci0000:00 [ 1621.831723] calling 0000:00:1f.2+ @ 21843, parent: pci0000:00 [ 1621.831725] call 0000:00:1f.0+ returned 0 after 0 usecs [ 1621.831726] call 0000:00:1f.2+ returned 0 after 0 usecs [ 1621.831730] calling 0000:00:1f.3+ @ 21846, parent: pci0000:00 [ 1621.831731] calling 0000:00:1f.4+ @ 21843, parent: pci0000:00 [ 1621.831732] call 0000:00:1f.4+ returned 0 after 0 usecs [ 1621.831734] calling 0000:00:1f.6+ @ 21843, parent: pci0000:00 [ 1621.832021] calling 0000:01:00.0+ @ 21845, parent: 0000:00:1c.0 [ 1621.832053] call PNP0C0A:00+ returned 0 after 593 usecs [ 1621.832059] calling PNP0C0A:01+ @ 21838, parent: PNP0C09:00 [ 1621.832232] call PNP0C0A:01+ returned 0 after 166 usecs [ 1621.832235] calling PNP0C0A:02+ @ 21838, parent: PNP0C09:00 [ 1621.832400] call PNP0C0A:02+ returned 0 after 160 usecs [ 1621.832407] calling PNP0C0D:00+ @ 21838, parent: PNP0C09:00 [ 1621.832727] call PNP0C0D:00+ returned 0 after 308 usecs [ 1621.832843] call 0000:00:14.0+ returned 0 after 1436 usecs [ 1621.832859] calling usb1+ @ 21841, parent: 0000:00:14.0 [ 1621.832960] calling dock.0+ @ 21838, parent: platform [ 1621.832962] call dock.0+ returned 0 after 0 usecs [ 1621.832985] calling ACPI0003:00+ @ 21838, parent: LNXSYBUS:00 [ 1621.833027] call ACPI0003:00+ returned 0 after 38 usecs [ 1621.833030] calling PNP0C0C:00+ @ 21838, parent: LNXSYBUS:00 [ 1621.833031] call PNP0C0C:00+ returned 0 after 0 usecs [ 1621.833035] calling PNP0C0E:00+ @ 21838, parent: LNXSYBUS:00 [ 1621.833036] call PNP0C0E:00+ returned 0 after 0 usecs [ 1621.833049] calling LNXTHERM:00+ @ 21838, parent: LNXSYBUS:01 [ 1621.833132] call LNXTHERM:00+ returned 0 after 80 usecs [ 1621.833135] calling LNXTHERM:01+ @ 21838, parent: LNXSYBUS:01 [ 1621.833136] call LNXTHERM:01+ returned 0 after 0 usecs [ 1621.833141] calling PNP0C09:00+ @ 21838, parent: 0000:00:1f.0 [ 1621.833142] call PNP0C09:00+ returned 0 after 0 usecs [ 1621.833142] calling PNP0C0A:00+ @ 21838, parent: PNP0C09:00 [ 1621.833143] call PNP0C0A:00+ returned 0 after 0 usecs [ 1621.833144] calling PNP0C0A:01+ @ 21838, parent: PNP0C09:00 [ 1621.833144] call PNP0C0A:01+ returned 0 after 0 usecs [ 1621.833145] calling PNP0C0A:02+ @ 21838, parent: PNP0C09:00 [ 1621.833145] call PNP0C0A:02+ returned 0 after 0 usecs [ 1621.833146] calling INT33D6:00+ @ 21838, parent: PNP0C09:00 [ 1621.833146] call INT33D6:00+ returned 0 after 0 usecs [ 1621.833147] calling PNP0C0D:00+ @ 21838, parent: PNP0C09:00 [ 1621.833147] call PNP0C0D:00+ returned 0 after 0 usecs [ 1621.833148] calling INT3404:00+ @ 21838, parent: PNP0C09:00 [ 1621.833148] call INT3404:00+ returned 0 after 0 usecs [ 1621.833149] calling INT3404:01+ @ 21838, parent: PNP0C09:00 [ 1621.833149] call INT3404:01+ returned 0 after 0 usecs [ 1621.833150] calling INT0800:00+ @ 21838, parent: 0000:00:1f.0 [ 1621.833150] call INT0800:00+ returned 0 after 0 usecs [ 1621.833151] calling PNP0103:00+ @ 21838, parent: 0000:00:1f.0 [ 1621.833151] call PNP0103:00+ returned 0 after 0 usecs [ 1621.833153] calling INT3447:00+ @ 21838, parent: pci0000:00 [ 1621.833153] call INT3447:00+ returned 0 after 0 usecs [ 1621.833154] calling INT3402:00+ @ 21838, parent: pci0000:00 [ 1621.833154] call INT3402:00+ returned 0 after 0 usecs [ 1621.833155] calling ACPI0003:00+ @ 21838, parent: platform [ 1621.833155] call ACPI0003:00+ returned 0 after 0 usecs [ 1621.833156] calling PNP0C0C:00+ @ 21838, parent: platform [ 1621.833156] call PNP0C0C:00+ returned 0 after 0 usecs [ 1621.833157] calling INT33D5:00+ @ 21838, parent: platform [ 1621.833157] call INT33D5:00+ returned 0 after 0 usecs [ 1621.833158] calling PNP0C0E:00+ @ 21838, parent: platform [ 1621.833158] call PNP0C0E:00+ returned 0 after 0 usecs [ 1621.833159] calling PNP0C14:00+ @ 21838, parent: platform [ 1621.833159] call PNP0C14:00+ returned 0 after 0 usecs [ 1621.833160] calling ACPI000C:00+ @ 21838, parent: platform [ 1621.833160] call ACPI000C:00+ returned 0 after 0 usecs [ 1621.833161] calling INT33A1:00+ @ 21838, parent: platform [ 1621.833161] call INT33A1:00+ returned 0 after 0 usecs [ 1621.833162] calling PNP0C0B:00+ @ 21838, parent: platform [ 1621.833177] call PNP0C0B:00+ returned 0 after 14 usecs [ 1621.833178] calling PNP0C0B:01+ @ 21838, parent: platform [ 1621.833191] call PNP0C0B:01+ returned 0 after 12 usecs [ 1621.833191] calling PNP0C0B:02+ @ 21838, parent: platform [ 1621.833204] call PNP0C0B:02+ returned 0 after 11 usecs [ 1621.833205] calling PNP0C0B:03+ @ 21838, parent: platform [ 1621.833217] call PNP0C0B:03+ returned 0 after 11 usecs [ 1621.833218] calling PNP0C0B:04+ @ 21838, parent: platform [ 1621.833231] call PNP0C0B:04+ returned 0 after 11 usecs [ 1621.833231] calling LNXPWRBN:00+ @ 21838, parent: LNXSYSTM:00 [ 1621.833232] call LNXPWRBN:00+ returned 0 after 0 usecs [ 1621.833234] calling 00:00+ @ 21838, parent: pnp0 [ 1621.833235] call 00:00+ returned 0 after 0 usecs [ 1621.833235] calling 00:01+ @ 21838, parent: pnp0 [ 1621.833236] call 00:01+ returned 0 after 0 usecs [ 1621.833237] calling 00:02+ @ 21838, parent: pnp0 [ 1621.833237] call 00:02+ returned 0 after 0 usecs [ 1621.833238] calling 00:03+ @ 21838, parent: pnp0 [ 1621.833238] call 00:03+ returned 0 after 0 usecs [ 1621.833239] calling 00:04+ @ 21838, parent: pnp0 [ 1621.833241] rtc_cmos 00:04: System wakeup disabled by ACPI [ 1621.833378] call 00:04+ returned 0 after 135 usecs [ 1621.833386] calling 00:05+ @ 21838, parent: pnp0 [ 1621.833386] call 00:05+ returned 0 after 0 usecs [ 1621.833387] calling 00:06+ @ 21838, parent: pnp0 [ 1621.833432] serial 00:06: activated [ 1621.833434] call 00:06+ returned 0 after 45 usecs [ 1621.833434] calling 00:07+ @ 21838, parent: pnp0 [ 1621.833435] call 00:07+ returned 0 after 0 usecs [ 1621.833435] calling 00:08+ @ 21838, parent: pnp0 [ 1621.833436] call 00:08+ returned 0 after 0 usecs [ 1621.833437] calling 00:09+ @ 21838, parent: pnp0 [ 1621.833437] call 00:09+ returned 0 after 0 usecs [ 1621.833438] calling 00:0a+ @ 21838, parent: pnp0 [ 1621.833438] call 00:0a+ returned 0 after 0 usecs [ 1621.833439] calling 00:0b+ @ 21838, parent: pnp0 [ 1621.833439] call 00:0b+ returned 0 after 0 usecs [ 1621.833455] calling pcspkr+ @ 21838, parent: platform [ 1621.833455] call pcspkr+ returned 0 after 0 usecs [ 1621.833456] calling platform-framebuffer.0+ @ 21838, parent: platform [ 1621.833457] call platform-framebuffer.0+ returned 0 after 0 usecs [ 1621.833458] calling alarmtimer+ @ 21838, parent: platform [ 1621.833459] call alarmtimer+ returned 0 after 0 usecs [ 1621.833464] calling input0+ @ 21838, parent: PNP0C0D:00 [ 1621.833464] call input0+ returned 0 after 0 usecs [ 1621.833465] calling input1+ @ 21838, parent: PNP0C0C:00 [ 1621.833466] call input1+ returned 0 after 0 usecs [ 1621.833467] calling input2+ @ 21838, parent: PNP0C0E:00 [ 1621.833470] call input2+ returned 0 after 0 usecs [ 1621.833471] calling input3+ @ 21838, parent: LNXPWRBN:00 [ 1621.833472] call input3+ returned 0 after 0 usecs [ 1621.833476] calling serial8250+ @ 21838, parent: platform [ 1621.833478] call serial8250+ returned 0 after 1 usecs [ 1621.833496] calling Fixed MDIO bus.0+ @ 21838, parent: platform [ 1621.833496] call Fixed MDIO bus.0+ returned 0 after 0 usecs [ 1621.833498] calling i8042+ @ 21838, parent: platform [ 1621.833595] call i8042+ returned 0 after 94 usecs [ 1621.833596] calling serio0+ @ 21838, parent: i8042 [ 1621.833598] call serio0+ returned 0 after 1 usecs [ 1621.833615] calling serio1+ @ 21838, parent: i8042 [ 1621.833616] call serio1+ returned 0 after 1 usecs [ 1621.833620] calling rtc0+ @ 21838, parent: 00:04 [ 1621.833621] call rtc0+ returned 0 after 0 usecs [ 1621.833621] calling input4+ @ 21838, parent: serio0 [ 1621.833623] call input4+ returned 0 after 1 usecs [ 1621.833625] calling input4::numlock+ @ 21838, parent: input4 [ 1621.833626] call input4::numlock+ returned 0 after 0 usecs [ 1621.833626] calling input4::capslock+ @ 21838, parent: input4 [ 1621.833627] call input4::capslock+ returned 0 after 0 usecs [ 1621.833628] calling input4::scrolllock+ @ 21838, parent: input4 [ 1621.833628] call input4::scrolllock+ returned 0 after 0 usecs [ 1621.833630] calling microcode+ @ 21838, parent: platform [ 1621.833630] call microcode+ returned 0 after 0 usecs [ 1621.834256] [drm:intel_opregion_setup] graphic opregion physical addr: 0x8d28c018 [ 1621.834264] [drm:intel_opregion_setup] Public ACPI methods supported [ 1621.834264] [drm:intel_opregion_setup] SWSCI supported [ 1621.835220] calling usb2+ @ 21860, parent: 0000:00:14.0 [ 1621.836584] calling ata1+ @ 21870, parent: 0000:00:17.0 [ 1621.836588] call ata1+ returned 0 after 3 usecs [ 1621.836598] calling ata2+ @ 21871, parent: 0000:00:17.0 [ 1621.836600] call ata2+ returned 0 after 2 usecs [ 1621.836607] calling mmc0::+ @ 21838, parent: 0000:00:1e.4 [ 1621.836608] call mmc0::+ returned 0 after 0 usecs [ 1621.836609] calling mmc1::+ @ 21838, parent: 0000:00:1e.6 [ 1621.836609] call mmc1::+ returned 0 after 0 usecs [ 1621.836611] calling host0+ @ 21870, parent: ata1 [ 1621.836612] call host0+ returned 0 after 0 usecs [ 1621.836614] calling host1+ @ 21870, parent: ata2 [ 1621.836614] call host1+ returned 0 after 0 usecs [ 1621.836616] calling target1:0:0+ @ 21870, parent: host1 [ 1621.836617] call target1:0:0+ returned 0 after 0 usecs [ 1621.836618] calling 1:0:0:0+ @ 21870, parent: target1:0:0 [ 1621.836619] call 1:0:0:0+ returned 0 after 0 usecs [ 1621.838762] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 1621.838767] [drm:intel_opregion_setup] ASLE supported [ 1621.838767] [drm:intel_opregion_setup] ASLE extension supported [ 1621.838768] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 1621.838956] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1621.839006] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1621.839081] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1621.839131] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1621.839208] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz [ 1621.839209] [drm:nop_init_clock_gating] No clock gating settings or workarounds applied. [ 1621.839268] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 1621.839270] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled [ 1621.839273] [drm:intel_modeset_readout_hw_state] [CRTC:34] hw state readout: disabled [ 1621.839275] [drm:intel_modeset_readout_hw_state] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1 [ 1621.839276] [drm:intel_modeset_readout_hw_state] DPPL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 1621.839278] [drm:intel_modeset_readout_hw_state] DPPL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 1621.839279] [drm:intel_modeset_readout_hw_state] DPPL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 1621.839281] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A [ 1621.839282] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A [ 1621.839283] [drm:intel_modeset_readout_hw_state] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe A [ 1621.839283] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe B [ 1621.839284] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe C [ 1621.839285] [drm:intel_modeset_readout_hw_state] [ENCODER:52:TMDS-52] hw state readout: disabled, pipe A [ 1621.839287] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:eDP-1] hw state readout: disabled [ 1621.839288] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:DP-1] hw state readout: disabled [ 1621.839290] [drm:intel_modeset_readout_hw_state] [CONNECTOR:50:HDMI-A-1] hw state readout: disabled [ 1621.839291] [drm:intel_modeset_readout_hw_state] [CONNECTOR:53:HDMI-A-2] hw state readout: disabled [ 1621.839294] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff8801e2684800 for pipe A [ 1621.839294] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1621.839295] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1621.839296] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839296] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839297] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1621.839297] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1621.839298] [drm:intel_dump_pipe_config] requested mode: [ 1621.839299] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1621.839299] [drm:intel_dump_pipe_config] adjusted mode: [ 1621.839300] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1621.839301] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1621.839301] [drm:intel_dump_pipe_config] port clock: 0 [ 1621.839301] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1621.839302] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1621.839302] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1621.839303] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1621.839303] [drm:intel_dump_pipe_config] ips: 0 [ 1621.839304] [drm:intel_dump_pipe_config] double wide: 0 [ 1621.839304] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 1621.839304] [drm:intel_dump_pipe_config] planes on this crtc [ 1621.839306] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 1621.839307] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1621.839307] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800 [ 1621.839308] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1621.839309] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1621.839311] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff8801e2683000 for pipe B [ 1621.839311] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1621.839311] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1621.839312] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839312] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839313] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1621.839313] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1621.839314] [drm:intel_dump_pipe_config] requested mode: [ 1621.839314] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1621.839315] [drm:intel_dump_pipe_config] adjusted mode: [ 1621.839315] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1621.839316] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1621.839316] [drm:intel_dump_pipe_config] port clock: 0 [ 1621.839317] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1621.839317] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1621.839318] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1621.839318] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1621.839319] [drm:intel_dump_pipe_config] ips: 0 [ 1621.839319] [drm:intel_dump_pipe_config] double wide: 0 [ 1621.839319] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 1621.839320] [drm:intel_dump_pipe_config] planes on this crtc [ 1621.839321] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 enabled [ 1621.839321] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1621.839322] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 1621.839322] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 1621.839323] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1621.839325] [drm:intel_dump_pipe_config] [CRTC:34][setup_hw_state] config ffff88008a248800 for pipe C [ 1621.839325] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1621.839325] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1621.839326] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839326] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839327] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1621.839327] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1621.839328] [drm:intel_dump_pipe_config] requested mode: [ 1621.839328] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1621.839329] [drm:intel_dump_pipe_config] adjusted mode: [ 1621.839329] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1621.839330] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1621.839330] [drm:intel_dump_pipe_config] port clock: 0 [ 1621.839331] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1621.839331] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1621.839332] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1621.839332] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1621.839332] [drm:intel_dump_pipe_config] ips: 0 [ 1621.839333] [drm:intel_dump_pipe_config] double wide: 0 [ 1621.839333] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 1621.839334] [drm:intel_dump_pipe_config] planes on this crtc [ 1621.839334] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 2.0 idx: 6 disabled, scaler_id = -1 [ 1621.839335] [drm:intel_dump_pipe_config] CURSOR PLANE:33 plane: 2.3 idx: 7 disabled, scaler_id = -1 [ 1621.839336] [drm:intel_dump_pipe_config] STANDARD PLANE:35 plane: 2.1 idx: 8 disabled, scaler_id = -1 [ 1621.839336] [drm:intel_modeset_setup_hw_state] DPLL 0 enabled but not in use, disabling [ 1621.839388] [drm:intel_power_well_disable] disabling DDI D power well [ 1621.839390] [drm:skl_set_power_well] Disabling DDI D power well [ 1621.839393] [drm:intel_power_well_disable] disabling DDI C power well [ 1621.839395] [drm:skl_set_power_well] Disabling DDI C power well [ 1621.839398] [drm:intel_power_well_disable] disabling DDI B power well [ 1621.839400] [drm:skl_set_power_well] Disabling DDI B power well [ 1621.839403] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1621.839405] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1621.839408] [drm:intel_power_well_disable] disabling power well 2 [ 1621.839418] [drm:skl_set_power_well] Disabling power well 2 [ 1621.839420] [drm:intel_power_well_disable] disabling DC off [ 1621.839424] [drm:skl_enable_dc6] Enabling DC6 [ 1621.839425] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1621.839736] [drm:intel_power_well_disable] disabling always-on [ 1621.839742] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1621.839743] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1621.839745] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1621.839746] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1621.839746] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1621.839747] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1621.839748] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1621.839748] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8801e2680000 for pipe A [ 1621.839749] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1621.839749] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1621.839750] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839751] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1621.839751] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1621.839751] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1621.839752] [drm:intel_dump_pipe_config] requested mode: [ 1621.839753] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1621.839753] [drm:intel_dump_pipe_config] adjusted mode: [ 1621.839754] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1621.839755] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1621.839755] [drm:intel_dump_pipe_config] port clock: 540000 [ 1621.839756] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1621.839756] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1621.839757] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1621.839757] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1621.839757] [drm:intel_dump_pipe_config] ips: 0 [ 1621.839758] [drm:intel_dump_pipe_config] double wide: 0 [ 1621.839758] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1621.839758] [drm:intel_dump_pipe_config] planes on this crtc [ 1621.839759] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 1621.839760] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1621.839760] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800 [ 1621.839761] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1621.839761] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1621.839762] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DP-1] checking for sink bpp constrains [ 1621.839763] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1621.839763] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1621.839764] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1621.839764] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1621.839765] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1621.839766] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff8801e2685800 for pipe B [ 1621.839766] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1621.839766] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1621.839767] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1621.839768] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1621.839768] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1621.839768] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1621.839769] [drm:intel_dump_pipe_config] requested mode: [ 1621.839770] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1621.839770] [drm:intel_dump_pipe_config] adjusted mode: [ 1621.839771] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1621.839772] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1621.839772] [drm:intel_dump_pipe_config] port clock: 162000 [ 1621.839772] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1621.839773] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1621.839773] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1621.839774] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1621.839774] [drm:intel_dump_pipe_config] ips: 0 [ 1621.839774] [drm:intel_dump_pipe_config] double wide: 0 [ 1621.839775] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 [ 1621.839775] [drm:intel_dump_pipe_config] planes on this crtc [ 1621.839776] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 enabled [ 1621.839777] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1621.839777] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 1621.839777] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 1621.839778] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1621.839780] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1621.839781] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1621.839783] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1621.839783] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1621.839784] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1621.839784] [drm:intel_find_shared_dpll] CRTC:30 allocated DPPL 1 [ 1621.839785] [drm:intel_reference_shared_dpll] using DPPL 1 for pipe B [ 1621.839785] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1621.839786] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:34] scaler_user index 2.31 [ 1621.839790] [drm:intel_power_well_enable] enabling always-on [ 1621.839790] [drm:intel_power_well_enable] enabling DC off [ 1621.839791] [drm:gen9_set_dc_state] Setting DC state from 02 to 00 [ 1621.839796] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1621.839798] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1621.839800] [drm:intel_power_well_enable] enabling power well 2 [ 1621.839802] [drm:skl_set_power_well] Enabling power well 2 [ 1621.839810] [drm:intel_power_well_enable] enabling DDI B power well [ 1621.839812] [drm:skl_set_power_well] Enabling DDI B power well [ 1621.839815] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1621.839815] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1621.839816] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1621.839816] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1621.839817] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1621.839817] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1621.839818] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1621.839819] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1621.839820] [drm:verify_single_dpll_state] DPLL 0 [ 1621.839821] [drm:verify_single_dpll_state] DPPL 1 [ 1621.839822] [drm:verify_single_dpll_state] DPPL 2 [ 1621.839823] [drm:verify_single_dpll_state] DPPL 3 [ 1621.839825] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1621.839825] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1621.839856] [drm:edp_panel_on] Turn eDP port A panel power on [ 1621.839863] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1621.839879] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1621.840460] call 0000:00:1f.3+ returned 0 after 8523 usecs [ 1621.840629] calling hdaudioC0D0+ @ 21874, parent: 0000:00:1f.3 [ 1621.840644] sd 1:0:0:0: [sda] Starting disk [ 1621.842093] call hdaudioC0D0+ returned 0 after 1429 usecs [ 1621.842333] call 0000:00:16.0+ returned 0 after 10672 usecs [ 1621.908756] call 0000:01:00.0+ returned 0 after 74932 usecs [ 1621.940661] call 0000:00:1f.6+ returned 0 after 106369 usecs [ 1622.040612] call usb2+ returned 0 after 200571 usecs [ 1622.048562] call usb1+ returned 0 after 210641 usecs [ 1622.048602] calling 1-2+ @ 21870, parent: usb1 [ 1622.147648] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1622.147876] ata1: SATA link down (SStatus 4 SControl 300) [ 1622.188614] ata2.00: configured for UDMA/133 [ 1622.308774] usb 1-2: reset low-speed USB device number 2 using xhci_hcd [ 1622.372666] [drm:wait_panel_status] Wait complete [ 1622.372706] [drm:wait_panel_on] Wait for panel power on [ 1622.372722] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1622.434654] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1622.434655] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1622.434655] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1622.434661] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1622.590398] call 1-2+ returned 0 after 529083 usecs [ 1622.592729] [drm:wait_panel_status] Wait complete [ 1622.592739] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1622.592786] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1622.593863] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1622.593863] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1622.593864] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1622.594500] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1622.595434] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1622.595590] [drm:skylake_pfit_enable] for crtc_state = ffff8801e2680000 [ 1622.596196] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1622.596202] [drm:intel_enable_pipe] enabling pipe A [ 1622.596211] [drm:intel_edp_backlight_on] [ 1622.596211] [drm:intel_panel_enable_backlight] pipe A [ 1622.596250] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1622.600669] [drm:intel_psr_match_conditions] PSR disable by flag [ 1622.600670] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1622.600688] [drm:intel_enable_shared_dpll] enable DPPL 1 (active 2, on? 0) for crtc 30 [ 1622.600689] [drm:intel_enable_shared_dpll] enabling DPPL 1 [ 1622.603810] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1622.603811] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1622.603811] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1622.604378] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1622.607293] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1622.607446] [drm:skylake_pfit_enable] for crtc_state = ffff8801e2685800 [ 1622.608032] ------------[ cut here ]------------ [ 1622.608048] WARNING: CPU: 0 PID: 20562 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1622.608049] WARN_ON(!wm_changed) [ 1622.608068] Modules linked in: binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 [ 1622.608073] psmouse i2c_algo_bit drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1622.608075] CPU: 0 PID: 20562 Comm: kworker/u16:0 Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1622.608076] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1622.608079] Workqueue: events_unbound async_run_entry_fn [ 1622.608080] 0000000000000000 ffff88008bdff8a8 ffffffff813b272c ffff88008bdff8f8 [ 1622.608081] 0000000000000000 ffff88008bdff8e8 ffffffff81079cc1 00000e3f00000000 [ 1622.608082] ffff8801e0b2c000 ffff8801e0b2d000 0000000000000004 ffff8801e017dbd0 [ 1622.608082] Call Trace: [ 1622.608085] [] dump_stack+0x63/0x87 [ 1622.608087] [] __warn+0xd1/0xf0 [ 1622.608088] [] warn_slowpath_fmt+0x4f/0x60 [ 1622.608097] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1622.608105] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1622.608119] [] ? intel_ddi_enable_transcoder_func+0x170/0x240 [i915] [ 1622.608127] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1622.608139] [] haswell_crtc_enable+0x45d/0x900 [i915] [ 1622.608151] [] ? intel_finish_crtc_commit+0xe/0x10 [i915] [ 1622.608157] [] ? drm_atomic_helper_commit_planes_on_crtc+0x169/0x230 [drm_kms_helper] [ 1622.608169] [] intel_atomic_commit+0x1386/0x1fc0 [i915] [ 1622.608171] [] ? pci_pm_suspend_noirq+0x161/0x190 [ 1622.608182] [] drm_atomic_commit+0x37/0x60 [drm] [ 1622.608195] [] intel_display_resume+0xb8/0x140 [i915] [ 1622.608196] [] ? pci_pm_suspend_noirq+0x190/0x190 [ 1622.608203] [] i915_drm_resume+0xe5/0x170 [i915] [ 1622.608209] [] i915_pm_resume+0x27/0x30 [i915] [ 1622.608210] [] pci_pm_restore+0x79/0xb0 [ 1622.608213] [] dpm_run_callback+0x4e/0x130 [ 1622.608213] [] device_resume+0xd3/0x1f0 [ 1622.608214] [] async_resume+0x1d/0x50 [ 1622.608216] [] async_run_entry_fn+0x48/0x150 [ 1622.608217] [] process_one_work+0x153/0x3f0 [ 1622.608218] [] worker_thread+0x12b/0x4b0 [ 1622.608219] [] ? rescuer_thread+0x340/0x340 [ 1622.608220] [] kthread+0xc9/0xe0 [ 1622.608222] [] ret_from_fork+0x22/0x40 [ 1622.608223] [] ? kthread_park+0x60/0x60 [ 1622.608224] ---[ end trace c331dce7e410af1b ]--- [ 1622.608260] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1622.608267] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1622.608273] [drm:intel_enable_pipe] enabling pipe B [ 1622.608280] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:46:DP-1], [ENCODER:45:TMDS-45] [ 1622.608280] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 32 bytes ELD [ 1622.625029] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1622.625032] [drm:verify_crtc_state] [CRTC:26] [ 1622.625050] [drm:verify_single_dpll_state] DPLL 0 [ 1622.625057] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1622.625060] [drm:verify_crtc_state] [CRTC:30] [ 1622.625077] [drm:verify_single_dpll_state] DPPL 1 [ 1622.625080] [drm:verify_crtc_state] [CRTC:34] [ 1622.625140] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1] [ 1622.625483] [drm:intel_dp_probe_oui] Sink OUI: 0022b9 [ 1622.625806] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1622.626172] [drm:drm_helper_hpd_irq_event] [CONNECTOR:37:eDP-1] status updated from connected to connected [ 1622.626173] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 1622.626554] [drm:intel_dp_get_dpcd] DPCD: 11 0a c4 01 01 00 01 00 02 02 06 00 00 00 00 [ 1622.626815] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1622.626817] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1622.626817] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1622.626818] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1622.627119] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:DP-1] status updated from connected to connected [ 1622.627120] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1] [ 1622.627427] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1622.627428] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1622.627721] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1622.627722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1622.628004] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1622.628004] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1622.628296] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1622.628298] [drm:drm_helper_hpd_irq_event] [CONNECTOR:50:HDMI-A-1] status updated from disconnected to disconnected [ 1622.628298] [drm:intel_hdmi_detect] [CONNECTOR:53:HDMI-A-2] [ 1622.752656] [drm:intel_hdmi_detect] HDMI live status down [ 1622.752658] [drm:drm_helper_hpd_irq_event] [CONNECTOR:53:HDMI-A-2] status updated from disconnected to disconnected [ 1622.753396] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 1622.758360] call 0000:00:02.0+ returned 0 after 905228 usecs [ 1622.758418] calling intel_backlight+ @ 21838, parent: card0-eDP-1 [ 1622.758419] call intel_backlight+ returned 0 after 0 usecs [ 1622.758420] calling input7+ @ 21838, parent: LNXVIDEO:00 [ 1622.758421] call input7+ returned 0 after 0 usecs [ 1622.758425] calling input8+ @ 21838, parent: 0003:046D:C03D.0001 [ 1622.758426] call input8+ returned 0 after 0 usecs [ 1622.758428] calling dwc3.0.auto+ @ 21838, parent: 0000:00:14.1 [ 1622.758430] call dwc3.0.auto+ returned 0 after 1 usecs [ 1622.758432] calling coretemp.0+ @ 21838, parent: platform [ 1622.758433] call coretemp.0+ returned 0 after 0 usecs [ 1622.758436] calling xhci-hcd.1.auto+ @ 21838, parent: dwc3.0.auto [ 1622.758437] call xhci-hcd.1.auto+ returned 0 after 0 usecs [ 1622.758439] calling input9+ @ 21838, parent: card0 [ 1622.758439] call input9+ returned 0 after 0 usecs [ 1622.758440] calling input10+ @ 21838, parent: card0 [ 1622.758440] call input10+ returned 0 after 0 usecs [ 1622.758442] PM: restore of devices complete after 927.115 msecs [ 1622.759042] PM: Image restored successfully. [ 1622.759065] PM: Basic memory bitmaps freed [ 1622.759067] Restarting tasks ... done. [ 1622.821223] gem_exec_suspend: exiting, ret=0 [ 1622.821853] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1622.821856] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1622.913635] kms_pipe_color: executing [ 1622.913691] [drm:i915_gem_open] [ 1622.914562] [drm:i915_gem_open] [ 1622.915500] kms_pipe_color: starting subtest ctm-blue-to-red-pipe1 [ 1622.915547] [drm:drm_mode_addfb2] [FB:95] [ 1622.915557] [drm:drm_mode_addfb2] [FB:96] [ 1622.915672] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1622.915675] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1622.915682] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1622.915683] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1622.915686] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1622.915687] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1622.915688] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1622.915689] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1622.915690] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1622.915692] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff8801e0336000 for pipe B [ 1622.915693] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1622.915694] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1622.915695] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1622.915696] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1622.915697] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1622.915698] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1622.915698] [drm:intel_dump_pipe_config] requested mode: [ 1622.915700] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1622.915700] [drm:intel_dump_pipe_config] adjusted mode: [ 1622.915702] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1622.915703] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1622.915704] [drm:intel_dump_pipe_config] port clock: 540000 [ 1622.915705] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1622.915705] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1622.915706] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1622.915707] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1622.915708] [drm:intel_dump_pipe_config] ips: 0 [ 1622.915709] [drm:intel_dump_pipe_config] double wide: 0 [ 1622.915709] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 [ 1622.915710] [drm:intel_dump_pipe_config] planes on this crtc [ 1622.915711] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 enabled [ 1622.915713] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1622.915714] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 1622.915715] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 1622.915716] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1622.915726] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1622.915727] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1622.915728] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1622.915730] [drm:intel_find_shared_dpll] CRTC:30 allocated DPLL 0 [ 1622.915731] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe B [ 1622.915732] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1622.929634] [drm:intel_edp_backlight_off] [ 1623.023707] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010 [ 1623.023711] [drm:intel_hpd_irq_handler] digital hpd port A - short [ 1623.023720] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short [ 1623.024157] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 [ 1623.024788] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1623.025119] [drm:intel_dp_get_dpcd] EDP DPCD : 02 b7 f6 [ 1623.025121] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1623.025124] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 1623.025126] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1623.025127] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1623.132673] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1623.132718] [drm:intel_disable_pipe] disabling pipe A [ 1623.147246] [drm:edp_panel_off] Turn eDP port A panel power off [ 1623.147274] [drm:wait_panel_off] Wait for panel power off time [ 1623.147293] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1623.154424] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1623.154431] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1623.154434] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1623.175275] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1623.175281] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1623.175284] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1623.200580] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1623.200586] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1623.200590] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1623.207528] [drm:wait_panel_status] Wait complete [ 1623.207541] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1623.207547] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1623.207614] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1623.208462] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 1623.208475] [drm:intel_disable_pipe] disabling pipe B [ 1623.225234] [drm:intel_disable_shared_dpll] disable DPPL 1 (active 2, on? 1) for crtc 30 [ 1623.225242] [drm:intel_disable_shared_dpll] disabling DPPL 1 [ 1623.225252] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1623.225254] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1623.225259] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1623.225262] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1623.225264] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1623.225266] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1623.225269] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1623.225273] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1623.225277] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1623.225280] [drm:verify_single_dpll_state] DPLL 0 [ 1623.225284] [drm:verify_single_dpll_state] DPPL 1 [ 1623.225288] [drm:verify_single_dpll_state] DPPL 2 [ 1623.225291] [drm:verify_single_dpll_state] DPPL 3 [ 1623.225296] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 2, on? 0) for crtc 30 [ 1623.225298] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1623.225345] [drm:edp_panel_on] Turn eDP port A panel power on [ 1623.225354] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1623.752708] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000 [ 1623.772805] [drm:wait_panel_status] Wait complete [ 1623.772834] [drm:wait_panel_on] Wait for panel power on [ 1623.772853] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1623.834666] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1623.834673] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1623.834677] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1623.836719] [drm] RC6 on [ 1623.990287] [drm:wait_panel_status] Wait complete [ 1623.990313] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1623.990362] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1623.991500] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1623.991504] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1623.991506] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1623.992192] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1623.993184] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1623.993365] [drm:skylake_pfit_enable] for crtc_state = ffff8801e0336000 [ 1623.994257] [drm:intel_enable_pipe] enabling pipe B [ 1623.994270] [drm:intel_edp_backlight_on] [ 1623.994273] [drm:intel_panel_enable_backlight] pipe B [ 1623.994314] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1623.996696] [drm:intel_psr_match_conditions] PSR disable by flag [ 1623.996710] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1624.011089] [drm:verify_crtc_state] [CRTC:26] [ 1624.011100] [drm:intel_power_well_disable] disabling DDI B power well [ 1624.011107] [drm:skl_set_power_well] Disabling DDI B power well [ 1624.011124] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1624.011132] [drm:verify_crtc_state] [CRTC:30] [ 1624.011166] [drm:verify_single_dpll_state] DPLL 0 [ 1624.011581] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1624.039526] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1624.039530] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1624.039536] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1624.077827] [drm:pipe_crc_set_source] collecting CRCs for pipe B, pf [ 1624.127929] [drm:pipe_crc_set_source] stopping CRCs for pipe B [ 1624.154946] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1624.154956] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1] [ 1624.154973] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1624.177876] [drm:pipe_crc_set_source] collecting CRCs for pipe B, pf [ 1624.227946] [drm:pipe_crc_set_source] stopping CRCs for pipe B [ 1624.244694] [drm:drm_mode_addfb2] [FB:114] [ 1624.244716] [drm:drm_mode_addfb2] [FB:115] [ 1624.245141] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1624.245147] [drm:drm_mode_setcrtc] [CONNECTOR:46:DP-1] [ 1624.245165] [drm:connected_sink_compute_bpp] [CONNECTOR:46:DP-1] checking for sink bpp constrains [ 1624.245168] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1624.245174] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1624.245178] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1624.245181] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1624.245185] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1624.245190] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff88008a157800 for pipe B [ 1624.245193] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1624.245195] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1624.245199] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1624.245203] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1624.245207] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1624.245210] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1624.245212] [drm:intel_dump_pipe_config] requested mode: [ 1624.245217] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1624.245220] [drm:intel_dump_pipe_config] adjusted mode: [ 1624.245224] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1624.245229] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1624.245231] [drm:intel_dump_pipe_config] port clock: 162000 [ 1624.245233] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1624.245236] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1624.245239] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1624.245242] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1624.245245] [drm:intel_dump_pipe_config] ips: 0 [ 1624.245247] [drm:intel_dump_pipe_config] double wide: 0 [ 1624.245250] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1624.245252] [drm:intel_dump_pipe_config] planes on this crtc [ 1624.245256] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 enabled [ 1624.245260] [drm:intel_dump_pipe_config] FB:95, fb = 3200x1800 format = 0x34325258 [ 1624.245264] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800 [ 1624.245268] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = -1 [ 1624.245272] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = -1 [ 1624.245278] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1624.245284] [drm:intel_find_shared_dpll] CRTC:30 allocated DPPL 1 [ 1624.245286] [drm:intel_reference_shared_dpll] using DPPL 1 for pipe B [ 1624.245290] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1624.250097] [drm:intel_power_well_enable] enabling DDI B power well [ 1624.250106] [drm:skl_set_power_well] Enabling DDI B power well [ 1624.261081] [drm:intel_edp_backlight_off] [ 1624.464646] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1624.464689] [drm:intel_disable_pipe] disabling pipe B [ 1624.478926] [drm:edp_panel_off] Turn eDP port A panel power off [ 1624.478951] [drm:wait_panel_off] Wait for panel power off time [ 1624.478967] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000 [ 1624.488099] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1624.488101] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1624.488103] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1624.488111] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1624.508915] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1624.508919] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1624.508920] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1624.508935] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1624.532294] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1624.532298] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1624.532299] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1624.532313] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1624.536685] [drm:wait_panel_status] Wait complete [ 1624.536693] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 2, on? 1) for crtc 30 [ 1624.536696] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1624.536700] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1624.536702] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1624.536703] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1624.536704] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1624.536705] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1624.536705] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1624.536706] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1624.536708] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1624.536710] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1624.536711] [drm:verify_single_dpll_state] DPLL 0 [ 1624.536713] [drm:verify_single_dpll_state] DPPL 1 [ 1624.536714] [drm:verify_single_dpll_state] DPPL 2 [ 1624.536716] [drm:verify_single_dpll_state] DPPL 3 [ 1624.536718] [drm:intel_enable_shared_dpll] enable DPPL 1 (active 2, on? 0) for crtc 30 [ 1624.536719] [drm:intel_enable_shared_dpll] enabling DPPL 1 [ 1624.539814] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1624.539816] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1624.539816] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1624.540386] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1624.543268] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1624.543414] [drm:skylake_pfit_enable] for crtc_state = ffff88008a157800 [ 1624.544034] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1624.544039] [drm:intel_enable_pipe] enabling pipe B [ 1624.544048] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:46:DP-1], [ENCODER:45:TMDS-45] [ 1624.544050] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 32 bytes ELD [ 1624.560815] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1624.560820] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1624.560830] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1624.560836] [drm:verify_crtc_state] [CRTC:30] [ 1624.560857] [drm:verify_single_dpll_state] DPPL 1 [ 1624.580744] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1624.580748] [drm:drm_mode_setcrtc] [CONNECTOR:46:DP-1] [ 1624.580754] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1624.627497] [drm:pipe_crc_set_source] collecting CRCs for pipe B, pf [ 1624.677698] [drm:pipe_crc_set_source] stopping CRCs for pipe B [ 1624.696563] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1624.696568] [drm:drm_mode_setcrtc] [CONNECTOR:46:DP-1] [ 1624.696577] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1624.727703] [drm:pipe_crc_set_source] collecting CRCs for pipe B, pf [ 1624.777737] [drm:pipe_crc_set_source] stopping CRCs for pipe B [ 1624.797719] kms_pipe_color: exiting, ret=99 [ 1624.797841] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains [ 1624.797843] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18 [ 1624.797848] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1624.797850] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz [ 1624.797854] [drm:intel_dp_compute_config] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 18 [ 1624.797855] [drm:intel_dp_compute_config] DP link bw required 650358 available 1728000 [ 1624.797858] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1624.797861] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8801e03e7800 for pipe A [ 1624.797863] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1624.797864] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 1624.797867] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1624.797870] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 3157174, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64 [ 1624.797872] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1624.797873] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1624.797874] [drm:intel_dump_pipe_config] requested mode: [ 1624.797878] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1624.797880] [drm:intel_dump_pipe_config] adjusted mode: [ 1624.797883] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa [ 1624.797886] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa [ 1624.797887] [drm:intel_dump_pipe_config] port clock: 540000 [ 1624.797888] [drm:intel_dump_pipe_config] pipe src size: 3200x1800 [ 1624.797890] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1624.797892] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1624.797893] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1624.797895] [drm:intel_dump_pipe_config] ips: 0 [ 1624.797895] [drm:intel_dump_pipe_config] double wide: 0 [ 1624.797897] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 [ 1624.797898] [drm:intel_dump_pipe_config] planes on this crtc [ 1624.797903] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 1624.797906] [drm:intel_dump_pipe_config] FB:85, fb = 3200x1800 format = 0x34325258 [ 1624.797906] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0 [ 1624.797909] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1624.797910] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1624.797916] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1624.797919] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1624.797924] [drm:intel_find_shared_dpll] CRTC:26 allocated DPLL 0 [ 1624.797925] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A [ 1624.797927] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1624.797942] [drm:intel_power_well_enable] enabling DDI A/E power well [ 1624.797947] [drm:skl_set_power_well] Enabling DDI A/E power well [ 1624.797954] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1624.797955] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1624.797957] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1624.797959] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1624.797960] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1624.797961] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1624.797964] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1624.797972] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1624.797974] [drm:verify_single_dpll_state] DPLL 0 [ 1624.797977] [drm:verify_single_dpll_state] DPPL 1 [ 1624.797981] [drm:verify_single_dpll_state] DPPL 2 [ 1624.797983] [drm:verify_single_dpll_state] DPPL 3 [ 1624.797988] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 26 [ 1624.797989] [drm:intel_enable_shared_dpll] enabling DPLL 0 [ 1624.798039] [drm:edp_panel_on] Turn eDP port A panel power on [ 1624.798048] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1625.084882] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [ 1625.084892] [drm:wait_panel_status] Wait complete [ 1625.084915] [drm:wait_panel_on] Wait for panel power on [ 1625.084932] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003 [ 1625.146811] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1625.146814] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1625.146815] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 3 [ 1625.146844] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1625.287102] [drm:wait_panel_status] Wait complete [ 1625.287123] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1625.287172] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 1625.288331] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1625.288333] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1625.288335] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1625.289035] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1625.290002] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1625.290173] [drm:skylake_pfit_enable] for crtc_state = ffff8801e03e7800 [ 1625.291091] ------------[ cut here ]------------ [ 1625.291131] WARNING: CPU: 0 PID: 21935 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1625.291134] WARN_ON(!wm_changed) [ 1625.291180] Modules linked in: binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 [ 1625.291194] psmouse i2c_algo_bit drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1625.291199] CPU: 0 PID: 21935 Comm: kms_pipe_color Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1625.291201] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1625.291206] 0000000000000000 ffff88008c633698 ffffffff813b272c ffff88008c6336e8 [ 1625.291209] 0000000000000000 ffff88008c6336d8 ffffffff81079cc1 00000e3f00000000 [ 1625.291212] ffff8801e0b2d000 ffff8801e0b2c000 0000000000000004 ffff8801e017dbd0 [ 1625.291213] Call Trace: [ 1625.291222] [] dump_stack+0x63/0x87 [ 1625.291226] [] __warn+0xd1/0xf0 [ 1625.291230] [] warn_slowpath_fmt+0x4f/0x60 [ 1625.291261] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1625.291290] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1625.291339] [] ? intel_ddi_enable_transcoder_func+0x170/0x240 [i915] [ 1625.291367] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1625.291414] [] haswell_crtc_enable+0x45d/0x900 [i915] [ 1625.291457] [] intel_atomic_commit+0x1386/0x1fc0 [i915] [ 1625.291463] [] ? __ww_mutex_lock_slowpath+0x16e/0x184 [ 1625.291497] [] ? drm_atomic_add_affected_connectors+0x27/0xf0 [drm] [ 1625.291523] [] drm_atomic_commit+0x37/0x60 [drm] [ 1625.291538] [] restore_fbdev_mode+0x22d/0x260 [drm_kms_helper] [ 1625.291565] [] ? drm_modeset_lock_all_ctx+0x97/0xb0 [drm] [ 1625.291578] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [ 1625.291588] [] drm_fb_helper_set_par+0x2c/0x50 [drm_kms_helper] [ 1625.291634] [] intel_fbdev_set_par+0x1a/0x60 [i915] [ 1625.291639] [] ? put_dec+0x1a/0x80 [ 1625.291645] [] fb_set_var+0x191/0x400 [ 1625.291650] [] ? legitimize_mnt+0x16/0x40 [ 1625.291655] [] ? zone_statistics+0x7c/0xa0 [ 1625.291661] [] fbcon_blank+0x1bc/0x2b0 [ 1625.291668] [] do_unblank_screen+0xb8/0x1c0 [ 1625.291671] [] vt_ioctl+0x1053/0x10d0 [ 1625.291675] [] tty_ioctl+0x397/0xbb0 [ 1625.291679] [] do_vfs_ioctl+0x96/0x590 [ 1625.291682] [] SyS_ioctl+0x79/0x90 [ 1625.291687] [] do_syscall_64+0x69/0x110 [ 1625.291692] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 1625.291694] ---[ end trace c331dce7e410af1c ]--- [ 1625.291755] [drm:skl_wm_flush_pipe] flush pipe B (pass 2) [ 1625.294177] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1625.294189] [drm:intel_enable_pipe] enabling pipe A [ 1625.294200] [drm:intel_edp_backlight_on] [ 1625.294202] [drm:intel_panel_enable_backlight] pipe A [ 1625.294241] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 1625.294282] [drm:intel_psr_match_conditions] PSR disable by flag [ 1625.294283] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1625.310952] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1625.310959] [drm:verify_crtc_state] [CRTC:26] [ 1625.310992] [drm:verify_single_dpll_state] DPLL 0 [ 1625.322859] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1625.322861] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1625.434147] pm_rpm: executing [ 1625.434203] [drm:i915_gem_open] [ 1625.435085] [drm:i915_gem_open] [ 1625.435208] [drm:drm_mode_addfb2] [FB:114] [ 1625.471952] [drm:drm_mode_addfb2] [FB:115] [ 1625.496400] ahci 0000:00:17.0: port does not support device sleep [ 1625.849914] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 1626.509830] pm_rpm: starting subtest gem-execbuf-stress-extra-wait [ 1626.509893] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0] [ 1626.509928] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1626.509934] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1626.511102] [drm:intel_edp_backlight_off] [ 1626.712902] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1626.712951] [drm:intel_disable_pipe] disabling pipe A [ 1626.729718] [drm:edp_panel_off] Turn eDP port A panel power off [ 1626.729747] [drm:wait_panel_off] Wait for panel power off time [ 1626.729767] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control abcd0000 [ 1626.738936] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1626.738944] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1626.738948] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1626.738990] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1626.759778] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1626.759786] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1626.759790] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1626.759832] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1626.783124] [drm:intel_get_hpd_pins] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 1626.783133] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1626.783137] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 2 [ 1626.783183] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1626.790408] [drm:wait_panel_status] Wait complete [ 1626.790427] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 26 [ 1626.790434] [drm:intel_disable_shared_dpll] disabling DPLL 0 [ 1626.790448] ------------[ cut here ]------------ [ 1626.790496] WARNING: CPU: 3 PID: 22059 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/i915/intel_pm.c:3647 skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1626.790499] WARN_ON(!wm_changed) [ 1626.790501] Modules linked in: [ 1626.790504] binfmt_misc nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic xhci_plat_hcd dwc3 snd_hda_intel udc_core snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_rawmidi kvm_intel snd_seq kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_device ghash_clmulni_intel snd_timer aesni_intel snd aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw soundcore hci_uart btbcm btintel shpchp processor_thermal_device intel_soc_dts_iosf mei_me bluetooth dwc3_pci mei acpi_als kfifo_buf industrialio winbond_cir int3403_thermal rc_core int3402_thermal int3400_thermal int340x_thermal_zone acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 psmouse i2c_algo_bit [ 1626.790576] drm_kms_helper e1000e syscopyarea sdhci_pci sysfillrect ptp sdhci sysimgblt pps_core fb_sys_fops ahci drm libahci xhci_pci xhci_hcd wmi i2c_hid hid video pinctrl_sunrisepoint pinctrl_intel [ 1626.790599] CPU: 3 PID: 22059 Comm: pm_rpm Tainted: G U W 4.6.0-rc7-nightly+ #1 [ 1626.790602] Hardware name: Intel Corporation Kabylake Client platform/Skylake U DDR3L RVP7, BIOS KBLSE2R1.R00.X015.B01.1511271314 11/27/2015 [ 1626.790606] 0000000000000000 ffff88006f82f930 ffffffff813b272c ffff88006f82f980 [ 1626.790611] 0000000000000000 ffff88006f82f970 ffffffff81079cc1 00000e3f00000000 [ 1626.790616] ffff8801e0b2d000 ffff8801e0b2c000 0000000000000004 ffff8801e017dbd0 [ 1626.790621] Call Trace: [ 1626.790632] [] dump_stack+0x63/0x87 [ 1626.790638] [] __warn+0xd1/0xf0 [ 1626.790643] [] warn_slowpath_fmt+0x4f/0x60 [ 1626.790652] [] ? kmsg_dump_get_buffer+0x40/0x280 [ 1626.790687] [] skl_update_other_pipe_wm+0x172/0x180 [i915] [ 1626.790721] [] skl_update_wm+0x19a/0x6f0 [i915] [ 1626.790753] [] intel_update_watermarks+0x1e/0x30 [i915] [ 1626.790805] [] intel_atomic_commit+0x435/0x1fc0 [i915] [ 1626.790813] [] ? kmem_cache_alloc_trace+0x187/0x210 [ 1626.790829] [] ? drm_atomic_helper_connector_duplicate_state+0x35/0x80 [drm_kms_helper] [ 1626.790866] [] ? drm_atomic_get_crtc_state+0x36/0xf0 [drm] [ 1626.790895] [] ? drm_atomic_set_crtc_for_connector+0x93/0x100 [drm] [ 1626.790922] [] drm_atomic_commit+0x37/0x60 [drm] [ 1626.790937] [] drm_atomic_helper_set_config+0x82/0xc0 [drm_kms_helper] [ 1626.790964] [] drm_mode_set_config_internal+0x67/0x110 [drm] [ 1626.790992] [] drm_mode_setcrtc+0x3f1/0x570 [drm] [ 1626.791012] [] drm_ioctl+0x23b/0x4d0 [drm] [ 1626.791036] [] ? drm_mode_setplane+0x1c0/0x1c0 [drm] [ 1626.791043] [] ? vma_rb_erase+0x10f/0x200 [ 1626.791048] [] do_vfs_ioctl+0x96/0x590 [ 1626.791053] [] ? do_munmap+0x281/0x370 [ 1626.791057] [] SyS_ioctl+0x79/0x90 [ 1626.791063] [] do_syscall_64+0x69/0x110 [ 1626.791071] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 1626.791075] ---[ end trace c331dce7e410af1d ]--- [ 1626.791138] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1626.791149] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1626.791157] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1626.791159] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1626.791162] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1626.791165] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1626.791167] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1626.791170] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1626.791175] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1626.791183] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1626.791187] [drm:verify_single_dpll_state] DPLL 0 [ 1626.791192] [drm:verify_single_dpll_state] DPPL 1 [ 1626.791197] [drm:verify_single_dpll_state] DPPL 2 [ 1626.791200] [drm:verify_single_dpll_state] DPPL 3 [ 1626.791207] [drm:intel_power_well_disable] disabling DDI A/E power well [ 1626.791214] [drm:skl_set_power_well] Disabling DDI A/E power well [ 1626.791225] [drm:verify_crtc_state] [CRTC:26] [ 1626.791260] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1] [ 1626.791280] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:28] scaler_user index 1.3 [ 1626.791285] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:30] scaler_user index 1.31 [ 1626.794270] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 1626.794287] [drm:intel_disable_pipe] disabling pipe B [ 1626.811737] [drm:intel_disable_shared_dpll] disable DPPL 1 (active 2, on? 1) for crtc 30 [ 1626.811747] [drm:intel_disable_shared_dpll] disabling DPPL 1 [ 1626.811792] [drm:verify_encoder_state] [ENCODER:36:TMDS-36] [ 1626.811797] [drm:verify_encoder_state] [ENCODER:45:TMDS-45] [ 1626.811802] [drm:verify_encoder_state] [ENCODER:47:DP MST-47] [ 1626.811804] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1626.811807] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1626.811809] [drm:verify_encoder_state] [ENCODER:52:TMDS-52] [ 1626.811813] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1] [ 1626.811816] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1] [ 1626.811821] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1] [ 1626.811825] [drm:intel_connector_verify_state] [CONNECTOR:53:HDMI-A-2] [ 1626.811828] [drm:verify_single_dpll_state] DPLL 0 [ 1626.811833] [drm:verify_single_dpll_state] DPPL 1 [ 1626.811837] [drm:verify_single_dpll_state] DPPL 2 [ 1626.811840] [drm:verify_single_dpll_state] DPPL 3 [ 1626.811848] [drm:intel_power_well_disable] disabling DDI B power well [ 1626.811854] [drm:skl_set_power_well] Disabling DDI B power well [ 1626.811861] [drm:intel_power_well_disable] disabling power well 2 [ 1626.811880] [drm:skl_set_power_well] Disabling power well 2 [ 1626.811890] [drm:verify_crtc_state] [CRTC:30] [ 1626.811894] [drm:intel_power_well_disable] disabling DC off [ 1626.811901] [drm:skl_enable_dc6] Enabling DC6 [ 1626.811905] [drm:gen9_set_dc_state] Setting DC state from 00 to 02 [ 1626.812222] [drm:intel_power_well_disable] disabling always-on [ 1626.812256] [drm:drm_mode_setcrtc] [CRTC:34:crtc-2] [ 1626.812324] [drm:intel_runtime_suspend] Suspending device [ 1626.815609] [drm:intel_runtime_suspend] Device suspended [ 1626.925008] [drm:intel_runtime_resume] Resuming device [ 1626.946528] [drm:intel_runtime_resume] Device resumed [ 1628.849665] [drm] RC6 on [ 1628.949315] [drm:intel_runtime_suspend] Suspending device [ 1628.952111] [drm:intel_runtime_suspend] Device suspended [ 1634.069185] [drm:intel_runtime_resume] Resuming device [ 1634.092807] [drm:intel_runtime_resume] Device resumed [ 1635.837793] [drm] RC6 on [ 1635.937432] [drm:intel_runtime_suspend] Suspending device [ 1635.940307] [drm:intel_runtime_suspend] Device suspended [ 1641.013356] [drm:intel_runtime_resume] Resuming device [ 1641.034879] [drm:intel_runtime_resume] Device resumed [ 1642.826335] [drm] RC6 on [ 1642.925929] [drm:intel_runtime_suspend] Suspending device [ 1642.928527] [drm:intel_runtime_suspend] Device suspended [ 1648.053349] [drm:intel_runtime_resume] Resuming device [ 1648.074981] [drm:intel_runtime_resume] Device resumed [ 1649.838112] [drm] RC6 on [ 1649.938215] [drm:intel_runtime_suspend] Suspending device [ 1649.940820] [drm:intel_runtime_suspend] Device suspended [ 1654.993646] [drm:intel_runtime_resume] Resuming device [ 1655.017657] [drm:intel_runtime_resume] Device resumed [ 1656.826245] [drm] RC6 on [ 1656.926292] [drm:intel_runtime_suspend] Suspending device [ 1656.928894] [drm:intel_runtime_suspend] Device suspended [ 1662.037865] [drm:intel_runtime_resume] Resuming device [ 1662.059339] [drm:intel_runtime_resume] Device resumed [ 1663.826858] [drm] RC6 on [ 1663.926425] [drm:intel_runtime_suspend] Suspending device [ 1663.928947] [drm:intel_runtime_suspend] Device suspended [ 1668.977960] [drm:intel_runtime_resume] Resuming device [ 1668.999667] [drm:intel_runtime_resume] Device resumed [ 1670.850500] [drm] RC6 on [ 1670.950584] [drm:intel_runtime_suspend] Suspending device [ 1670.953098] [drm:intel_runtime_suspend] Device suspended [ 1676.017988] [drm:intel_runtime_resume] Resuming device [ 1676.041220] [drm:intel_runtime_resume] Device resumed [ 1677.826867] [drm] RC6 on [ 1677.926508] [drm:intel_runtime_suspend] Suspending device [ 1677.929323] [drm:intel_runtime_suspend] Device suspended [ 1679.808386] gem_exec_suspend: executing [ 1679.808447] [drm:i915_gem_open] [ 1679.822214] [drm:intel_runtime_resume] Resuming device [ 1679.843989] [drm:intel_runtime_resume] Device resumed [ 1679.846653] [drm:i915_gem_open] [ 1680.859238] [drm] RC6 on [ 1680.867178] [drm:intel_runtime_suspend] Suspending device [ 1680.870199] [drm:intel_runtime_suspend] Device suspended [ 1682.962349] [drm:intel_runtime_resume] Resuming device [ 1682.988539] [drm:intel_runtime_resume] Device resumed [ 1684.838950] [drm] RC6 on [ 1684.938712] [drm:intel_runtime_suspend] Suspending device [ 1684.941525] [drm:intel_runtime_suspend] Device suspended [ 1690.010479] [drm:intel_runtime_resume] Resuming device [ 1690.032030] [drm:intel_runtime_resume] Device resumed [ 1691.839086] [drm] RC6 on [ 1691.938878] [drm:intel_runtime_suspend] Suspending device [ 1691.941777] [drm:intel_runtime_suspend] Device suspended [ 1697.050716] [drm:intel_runtime_resume] Resuming device [ 1697.072263] [drm:intel_runtime_resume] Device resumed [ 1698.839341] [drm] RC6 on [ 1698.939263] [drm:intel_runtime_suspend] Suspending device [ 1698.941869] [drm:intel_runtime_suspend] Device suspended [ 1703.990882] [drm:intel_runtime_resume] Resuming device [ 1704.012051] [drm:intel_runtime_resume] Device resumed [ 1705.851514] [drm] RC6 on [ 1705.951180] [drm:intel_runtime_suspend] Suspending device [ 1705.954074] [drm:intel_runtime_suspend] Device suspended [ 1711.031079] [drm:intel_runtime_resume] Resuming device [ 1711.052617] [drm:intel_runtime_resume] Device resumed [ 1712.839633] [drm] RC6 on [ 1712.939631] [drm:intel_runtime_suspend] Suspending device [ 1712.942232] [drm:intel_runtime_suspend] Device suspended [ 1717.971160] [drm:intel_runtime_resume] Resuming device [ 1717.995135] [drm:intel_runtime_resume] Device resumed [ 1719.827836] [drm] RC6 on [ 1719.927855] [drm:intel_runtime_suspend] Suspending device [ 1719.930456] [drm:intel_runtime_suspend] Device suspended [ 1725.015355] [drm:intel_runtime_resume] Resuming device [ 1725.036900] [drm:intel_runtime_resume] Device resumed [ 1726.828429] [drm] RC6 on [ 1726.927950] [drm:intel_runtime_suspend] Suspending device [ 1726.930557] [drm:intel_runtime_suspend] Device suspended [ 1732.055502] [drm:intel_runtime_resume] Resuming device [ 1732.079628] [drm:intel_runtime_resume] Device resumed [ 1733.840158] [drm] RC6 on [ 1733.939700] [drm:intel_runtime_suspend] Suspending device [ 1733.942592] [drm:intel_runtime_suspend] Device suspended [ 1738.999733] [drm:intel_runtime_resume] Resuming device [ 1739.023717] [drm:intel_runtime_resume] Device resumed [ 1740.852771] [drm] RC6 on [ 1740.952069] [drm:intel_runtime_suspend] Suspending device [ 1740.954962] [drm:intel_runtime_suspend] Device suspended [ 1746.043842] [drm:intel_runtime_resume] Resuming device [ 1746.065477] [drm:intel_runtime_resume] Device resumed [ 1747.840533] [drm] RC6 on [ 1747.940213] [drm:intel_runtime_suspend] Suspending device [ 1747.943100] [drm:intel_runtime_suspend] Device suspended [ 1752.984036] [drm:intel_runtime_resume] Resuming device [ 1753.005620] [drm:intel_runtime_resume] Device resumed [ 1754.828683] [drm] RC6 on [ 1754.928389] [drm:intel_runtime_suspend] Suspending device [ 1754.931290] [drm:intel_runtime_suspend] Device suspended [ 1760.024268] [drm:intel_runtime_resume] Resuming device [ 1760.045735] [drm:intel_runtime_resume] Device resumed [ 1761.829225] [drm] RC6 on [ 1761.928491] [drm:intel_runtime_suspend] Suspending device [ 1761.931386] [drm:intel_runtime_suspend] Device suspended [ 1766.964334] [drm:intel_runtime_resume] Resuming device [ 1766.988048] [drm:intel_runtime_resume] Device resumed [ 1768.829081] [drm] RC6 on [ 1768.928644] [drm:intel_runtime_suspend] Suspending device [ 1768.931458] [drm:intel_runtime_suspend] Device suspended [ 1774.008583] [drm:intel_runtime_resume] Resuming device [ 1774.032473] [drm:intel_runtime_resume] Device resumed [ 1775.853197] [drm] RC6 on [ 1775.952835] [drm:intel_runtime_suspend] Suspending device [ 1775.955733] [drm:intel_runtime_suspend] Device suspended [ 1781.052559] [drm:intel_runtime_resume] Resuming device [ 1781.074250] [drm:intel_runtime_resume] Device resumed [ 1782.829376] [drm] RC6 on [ 1782.929378] [drm:intel_runtime_suspend] Suspending device [ 1782.931904] [drm:intel_runtime_suspend] Device suspended [ 1787.992923] [drm:intel_runtime_resume] Resuming device [ 1788.018836] [drm:intel_runtime_resume] Device resumed [ 1789.853632] [drm] RC6 on [ 1789.953231] [drm:intel_runtime_suspend] Suspending device [ 1789.956126] [drm:intel_runtime_suspend] Device suspended [ 1795.037087] [drm:intel_runtime_resume] Resuming device [ 1795.061062] [drm:intel_runtime_resume] Device resumed [ 1796.841561] [drm] RC6 on [ 1796.941426] [drm:intel_runtime_suspend] Suspending device [ 1796.944150] [drm:intel_runtime_suspend] Device suspended [ 1801.981195] [drm:intel_runtime_resume] Resuming device [ 1802.002894] [drm:intel_runtime_resume] Device resumed [ 1803.841903] [drm] RC6 on [ 1803.941889] [drm:intel_runtime_suspend] Suspending device [ 1803.944408] [drm:intel_runtime_suspend] Device suspended [ 1809.021392] [drm:intel_runtime_resume] Resuming device [ 1809.043000] [drm:intel_runtime_resume] Device resumed [ 1810.830046] [drm] RC6 on [ 1810.929745] [drm:intel_runtime_suspend] Suspending device [ 1810.932563] [drm:intel_runtime_suspend] Device suspended [ 1815.961596] [drm:intel_runtime_resume] Resuming device [ 1815.983084] [drm:intel_runtime_resume] Device resumed [ 1817.854217] [drm] RC6 on [ 1817.953847] [drm:intel_runtime_suspend] Suspending device [ 1817.956742] [drm:intel_runtime_suspend] Device suspended [ 1823.001746] [drm:intel_runtime_resume] Resuming device [ 1823.023316] [drm:intel_runtime_resume] Device resumed [ 1824.842328] [drm] RC6 on [ 1824.942345] [drm:intel_runtime_suspend] Suspending device [ 1824.944864] [drm:intel_runtime_suspend] Device suspended [ 1830.041943] [drm:intel_runtime_resume] Resuming device [ 1830.063497] [drm:intel_runtime_resume] Device resumed [ 1831.842551] [drm] RC6 on [ 1831.942180] [drm:intel_runtime_suspend] Suspending device [ 1831.945068] [drm:intel_runtime_suspend] Device suspended [ 1836.981934] [drm:intel_runtime_resume] Resuming device [ 1837.006076] [drm:intel_runtime_resume] Device resumed [ 1838.830729] [drm] RC6 on [ 1838.930479] [drm:intel_runtime_suspend] Suspending device [ 1838.933379] [drm:intel_runtime_suspend] Device suspended [ 1844.026101] [drm:intel_runtime_resume] Resuming device [ 1844.047826] [drm:intel_runtime_resume] Device resumed [ 1845.854922] [drm] RC6 on [ 1845.954738] [drm:intel_runtime_suspend] Suspending device [ 1845.957259] [drm:intel_runtime_suspend] Device suspended [ 1851.066414] [drm:intel_runtime_resume] Resuming device [ 1851.088002] [drm:intel_runtime_resume] Device resumed [ 1852.831127] [drm] RC6 on [ 1852.931011] [drm:intel_runtime_suspend] Suspending device [ 1852.933617] [drm:intel_runtime_suspend] Device suspended