[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.000000] Linux version 4.5.3-300.fc24.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 6.0.0 20160406 (Red Hat 6.0.0-0.20) (GCC) ) #1 SMP Thu May 5 01:56:27 UTC 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.3-300.fc24.x86_64 root=UUID=a67f4702-1ece-4493-ac63-3c8d6f4d82ac ro rhgb quiet LANG=en_US.UTF-8 [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000089eeafff] usable [ 0.000000] BIOS-e820: [mem 0x0000000089eeb000-0x0000000089ef1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000089ef2000-0x000000008a9c7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000008a9c8000-0x000000008af20fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008af21000-0x000000009d5acfff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d5ad000-0x000000009d644fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009d645000-0x000000009d68bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d68c000-0x000000009d747fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009d748000-0x000000009effefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009efff000-0x000000009effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009f800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x89bcc018-0x89bdc057] usable ==> usable [ 0.000000] e820: update [mem 0x89bbb018-0x89bcb857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000089bbb017] usable [ 0.000000] reserve setup_data: [mem 0x0000000089bbb018-0x0000000089bcb857] usable [ 0.000000] reserve setup_data: [mem 0x0000000089bcb858-0x0000000089bcc017] usable [ 0.000000] reserve setup_data: [mem 0x0000000089bcc018-0x0000000089bdc057] usable [ 0.000000] reserve setup_data: [mem 0x0000000089bdc058-0x0000000089eeafff] usable [ 0.000000] reserve setup_data: [mem 0x0000000089eeb000-0x0000000089ef1fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000089ef2000-0x000000008a9c7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000008a9c8000-0x000000008af20fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000008af21000-0x000000009d5acfff] usable [ 0.000000] reserve setup_data: [mem 0x000000009d5ad000-0x000000009d644fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009d645000-0x000000009d68bfff] usable [ 0.000000] reserve setup_data: [mem 0x000000009d68c000-0x000000009d747fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009d748000-0x000000009effefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009efff000-0x000000009effffff] usable [ 0.000000] reserve setup_data: [mem 0x000000009f800000-0x00000000df9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000081f5fffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0x9d714000 ACPI 2.0=0x9d714000 SMBIOS=0xf04c0 MPS=0xfd450 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z87M-D3H/Z87M-D3H, BIOS F11 08/12/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x81f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7800000000 write-back [ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 4 base 009F800000 mask 7FFF800000 uncachable [ 0.000000] 5 base 081F800000 mask 7FFF800000 uncachable [ 0.000000] 6 base 081F600000 mask 7FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0205f000, 0x0205ffff] PGTABLE [ 0.000000] BRK [0x02060000, 0x02060fff] PGTABLE [ 0.000000] BRK [0x02061000, 0x02061fff] PGTABLE [ 0.000000] BRK [0x02062000, 0x02062fff] PGTABLE [ 0.000000] BRK [0x02063000, 0x02063fff] PGTABLE [ 0.000000] BRK [0x02064000, 0x02064fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3ce43000-0x3fffafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000009D714000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000009D714080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000009D720E20 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000009D714190 00CC8D (v02 ALASKA A M I 00000088 INTL 20091112) [ 0.000000] ACPI: FACS 0x000000009D746080 000040 [ 0.000000] ACPI: APIC 0x000000009D720F30 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000009D720FC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000009D721010 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x000000009D721550 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: MCFG 0x000000009D722028 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000009D722068 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x000000009D7220A0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x000000009D722410 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: BGRT 0x000000009D7258F8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DMAR 0x000000009D725930 0000A8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x81f5e4000-0x81f5fafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000081f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000089eeafff] [ 0.000000] node 0: [mem 0x0000000089ef2000-0x000000008a9c7fff] [ 0.000000] node 0: [mem 0x000000008af21000-0x000000009d5acfff] [ 0.000000] node 0: [mem 0x000000009d645000-0x000000009d68bfff] [ 0.000000] node 0: [mem 0x000000009efff000-0x000000009effffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000081f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f5fffff] [ 0.000000] On node 0 totalpages: 8111666 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 24 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9987 pages used for memmap [ 0.000000] DMA32 zone: 639125 pages, LIFO batch:31 [ 0.000000] Normal zone: 116696 pages used for memmap [ 0.000000] Normal zone: 7468544 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics stolen memory at 0x9fa00000-0xc19fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x89bbb000-0x89bbbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x89bcb000-0x89bcbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x89bcc000-0x89bccfff] [ 0.000000] PM: Registered nosave memory: [mem 0x89bdc000-0x89bdcfff] [ 0.000000] PM: Registered nosave memory: [mem 0x89eeb000-0x89ef1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x8a9c8000-0x8af20fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d5ad000-0x9d644fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d68c000-0x9d747fff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d748000-0x9effefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0x9f7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88081f200000 s98648 r8192 d32424 u262144 [ 0.000000] pcpu-alloc: s98648 r8192 d32424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 7984895 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.3-300.fc24.x86_64 root=UUID=a67f4702-1ece-4493-ac63-3c8d6f4d82ac ro rhgb quiet LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 31568884K/32446664K available (8021K kernel code, 1333K rwdata, 3508K rodata, 1552K init, 1544K bss, 877780K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:65792 nr_irqs:488 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] tsc: Detected 3392.373 MHz processor [ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.74 BogoMIPS (lpj=3392373) [ 0.000021] pid_max: default: 32768 minimum: 301 [ 0.000025] ACPI: Core revision 20160108 [ 0.006585] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.008240] Security Framework initialized [ 0.008242] Yama: becoming mindful. [ 0.008244] SELinux: Initializing. [ 0.008251] SELinux: Starting in permissive mode [ 0.009576] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.013536] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.015213] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.015236] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.015475] CPU: Physical Processor ID: 0 [ 0.015477] CPU: Processor Core ID: 0 [ 0.015481] mce: CPU supports 9 MCE banks [ 0.015491] CPU0: Thermal monitoring enabled (TM1) [ 0.015498] process: using mwait in idle threads [ 0.015500] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.015500] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.015717] Freeing SMP alternatives memory: 32K (ffffffff81ed3000 - ffffffff81edb000) [ 0.022474] ftrace: allocating 29874 entries in 117 pages [ 0.030378] DMAR: Host address width 39 [ 0.030379] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.030385] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.030386] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.030389] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.030390] DMAR: RMRR base: 0x0000009ee83000 end: 0x0000009ee91fff [ 0.030390] DMAR: RMRR base: 0x000000df800000 end: 0x000000df9fffff [ 0.030392] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.030393] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.030393] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.030607] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.030608] x2apic enabled [ 0.030612] Switched APIC routing to cluster x2apic. [ 0.031006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.041011] TSC deadline timer enabled [ 0.041012] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.041029] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.041042] ... version: 3 [ 0.041043] ... bit width: 48 [ 0.041043] ... generic registers: 4 [ 0.041044] ... value mask: 0000ffffffffffff [ 0.041044] ... max period: 0000ffffffffffff [ 0.041045] ... fixed-purpose events: 3 [ 0.041045] ... event mask: 000000070000000f [ 0.041500] x86: Booting SMP configuration: [ 0.041501] .... node #0, CPUs: #1 [ 0.042582] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.044700] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.044760] #2 [ 0.045778] microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.047888] #3 [ 0.048905] microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13 [ 0.051011] #4 #5 #6 #7 [ 0.060512] x86: Booted up 1 node, 8 CPUs [ 0.060515] smpboot: Total of 8 processors activated (54277.96 BogoMIPS) [ 0.066664] devtmpfs: initialized [ 0.069399] PM: Registering ACPI NVS region [mem 0x89eeb000-0x89ef1fff] (28672 bytes) [ 0.069400] PM: Registering ACPI NVS region [mem 0x9d68c000-0x9d747fff] (770048 bytes) [ 0.069461] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.069513] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.069514] pinctrl core: initialized pinctrl subsystem [ 0.069549] RTC time: 8:53:02, date: 05/11/16 [ 0.070268] NET: Registered protocol family 16 [ 0.072548] cpuidle: using governor menu [ 0.072607] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.072608] ACPI: bus type PCI registered [ 0.072609] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.072653] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.072655] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.072658] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.072702] PCI: Using configuration type 1 for base access [ 0.073058] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.076604] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.076605] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.076760] ACPI: Added _OSI(Module Device) [ 0.076761] ACPI: Added _OSI(Processor Device) [ 0.076762] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.076762] ACPI: Added _OSI(Processor Aggregator Device) [ 0.078108] ACPI: Executed 1 blocks of module-level executable AML code [ 0.079601] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.080063] ACPI: Dynamic OEM Table Load: [ 0.080067] ACPI: SSDT 0xFFFF8807FB913400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.080434] ACPI: Dynamic OEM Table Load: [ 0.080437] ACPI: SSDT 0xFFFF8807FB8B2000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.080831] ACPI: Dynamic OEM Table Load: [ 0.080833] ACPI: SSDT 0xFFFF8807FB8CB200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.081866] ACPI: Interpreter enabled [ 0.081882] ACPI: (supports S0 S3 S4 S5) [ 0.081882] ACPI: Using IOAPIC for interrupt routing [ 0.081897] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.086850] ACPI: Power Resource [FN00] (off) [ 0.086894] ACPI: Power Resource [FN01] (off) [ 0.086936] ACPI: Power Resource [FN02] (off) [ 0.086978] ACPI: Power Resource [FN03] (off) [ 0.087022] ACPI: Power Resource [FN04] (off) [ 0.087470] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.087473] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.087563] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.087636] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.087637] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.087859] PCI host bridge to bus 0000:00 [ 0.087861] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.087862] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.087863] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.087864] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.087864] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.087865] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.087866] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.087867] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.087868] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.087872] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.087931] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.087938] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.087943] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.087946] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.087999] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.088003] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] [ 0.088069] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.088082] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] [ 0.088130] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.088156] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.088179] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.088193] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c00f 64bit] [ 0.088244] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.088296] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.088307] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] [ 0.088354] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.088381] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.088403] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.088453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.088501] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.088524] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.088577] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.088623] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.088645] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.088696] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.088740] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.088761] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.088812] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.088855] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.088883] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100 [ 0.089010] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.089020] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.089025] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.089031] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.089036] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.089041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.089047] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] [ 0.089074] pci 0000:00:1f.2: PME# supported from D3hot [ 0.089116] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.089127] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] [ 0.089143] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.089236] acpiphp: Slot [1] registered [ 0.089239] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.089292] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.089309] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.089335] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit] [ 0.089350] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.089431] pci 0000:02:00.0: supports D1 D2 [ 0.089432] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.089467] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.090584] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.090587] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.090589] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.090593] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.090644] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401 [ 0.090756] pci 0000:03:00.0: supports D1 D2 [ 0.090757] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090777] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.090796] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.090905] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode) [ 0.090982] pci 0000:05:00.0: [1102:0012] type 00 class 0x040300 [ 0.091001] pci 0000:05:00.0: reg 0x10: [mem 0xf7c04000-0xf7c07fff 64bit] [ 0.091013] pci 0000:05:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.091095] pci 0000:05:00.0: supports D2 [ 0.091125] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.092584] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.092588] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.093094] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.093122] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.093149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.093175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.093201] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.093227] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.093252] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.093278] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.093449] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.093511] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.093512] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.093514] vgaarb: loaded [ 0.093514] vgaarb: bridge control possible 0000:00:02.0 [ 0.093567] SCSI subsystem initialized [ 0.093590] libata version 3.00 loaded. [ 0.093605] ACPI: bus type USB registered [ 0.093614] usbcore: registered new interface driver usbfs [ 0.093618] usbcore: registered new interface driver hub [ 0.093630] usbcore: registered new device driver usb [ 0.093713] PCI: Using ACPI for IRQ routing [ 0.094860] PCI: pci_cache_line_size set to 64 bytes [ 0.094891] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.094892] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.094892] e820: reserve RAM buffer [mem 0x89bbb018-0x8bffffff] [ 0.094893] e820: reserve RAM buffer [mem 0x89bcc018-0x8bffffff] [ 0.094894] e820: reserve RAM buffer [mem 0x89eeb000-0x8bffffff] [ 0.094895] e820: reserve RAM buffer [mem 0x8a9c8000-0x8bffffff] [ 0.094895] e820: reserve RAM buffer [mem 0x9d5ad000-0x9fffffff] [ 0.094896] e820: reserve RAM buffer [mem 0x9d68c000-0x9fffffff] [ 0.094897] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff] [ 0.094898] e820: reserve RAM buffer [mem 0x81f600000-0x81fffffff] [ 0.094965] NetLabel: Initializing [ 0.094966] NetLabel: domain hash size = 128 [ 0.094966] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.094973] NetLabel: unlabeled traffic allowed by default [ 0.095001] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.095004] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.097022] clocksource: Switched to clocksource hpet [ 0.101295] VFS: Disk quotas dquot_6.6.0 [ 0.101307] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.101387] pnp: PnP ACPI init [ 0.101436] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.101438] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.101529] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.101530] system 00:01: [io 0xffff] has been reserved [ 0.101531] system 00:01: [io 0xffff] has been reserved [ 0.101532] system 00:01: [io 0xffff] has been reserved [ 0.101533] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.101534] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.101535] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.101535] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.101537] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 0.101538] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.101540] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.101554] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.101580] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.101582] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.101648] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.101649] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.101650] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 0.101651] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.101794] pnp 00:05: [dma 0 disabled] [ 0.101820] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.101981] pnp 00:06: [dma 0 disabled] [ 0.102048] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.102076] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.102077] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102311] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.102313] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.102314] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.102315] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.102316] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.102316] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.102317] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.102318] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.102319] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.102320] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.102321] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.102322] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.102324] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.102445] pnp: PnP ACPI: found 9 devices [ 0.108066] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.108101] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.108109] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.108110] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.108113] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.108116] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.108120] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.108138] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.108145] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.108148] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.108154] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.108155] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.108156] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.108157] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.108157] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.108158] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.108159] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.108160] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 0.108161] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.108162] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.108162] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.108163] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.108187] NET: Registered protocol family 2 [ 0.108365] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.108588] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.108681] TCP: Hash tables configured (established 262144 bind 65536) [ 0.108713] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.108778] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.108856] NET: Registered protocol family 1 [ 0.108865] pci 0000:00:02.0: Video device with shadowed ROM [ 0.108986] PCI: CLS 64 bytes, default 64 [ 0.109013] Unpacking initramfs... [ 0.469833] Freeing initrd memory: 50912K (ffff88003ce43000 - ffff88003fffb000) [ 0.469857] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.469859] software IO TLB [mem 0x85bbb000-0x89bbb000] (64MB) mapped at [ffff880085bbb000-ffff880089bbafff] [ 0.469903] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 0.469904] hw unit of domain pp0-core 2^-14 Joules [ 0.469904] hw unit of domain package 2^-14 Joules [ 0.469905] hw unit of domain dram 2^-14 Joules [ 0.469905] hw unit of domain pp1-gpu 2^-14 Joules [ 0.470476] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.470502] audit: initializing netlink subsys (disabled) [ 0.470512] audit: type=2000 audit(1462956782.452:1): initialized [ 0.470744] Initialise system trusted keyring [ 0.471747] zbud: loaded [ 0.472055] Key type big_key registered [ 0.472058] SELinux: Registering netfilter hooks [ 0.475030] NET: Registered protocol family 38 [ 0.475038] Key type asymmetric registered [ 0.475040] Asymmetric key parser 'x509' registered [ 0.475071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.475107] io scheduler noop registered [ 0.475109] io scheduler deadline registered [ 0.475130] io scheduler cfq registered (default) [ 0.475454] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.475458] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.475470] efifb: probing for efifb [ 0.475478] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90003800000, using 3072k, total 3072k [ 0.475479] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.475479] efifb: scrolling: redraw [ 0.475480] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.475538] Console: switching to colour frame buffer device 128x48 [ 0.476498] fb0: EFI VGA frame buffer device [ 0.476504] intel_idle: MWAIT substates: 0x42120 [ 0.476505] intel_idle: v0.4.1 model 0x3C [ 0.476505] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.476735] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.476738] ACPI: Power Button [PWRB] [ 0.476768] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.476769] ACPI: Power Button [PWRF] [ 0.477384] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.477386] ACPI: Thermal Zone [TZ00] (28 C) [ 0.477570] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.477571] ACPI: Thermal Zone [TZ01] (30 C) [ 0.477604] GHES: HEST is not enabled! [ 0.477659] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.498188] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.499395] Non-volatile memory driver v1.3 [ 0.499418] Linux agpgart interface v0.103 [ 0.500012] ahci 0000:00:1f.2: version 3.0 [ 0.500115] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode [ 0.500117] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.504522] scsi host0: ahci [ 0.504747] scsi host1: ahci [ 0.504877] scsi host2: ahci [ 0.505003] scsi host3: ahci [ 0.505157] scsi host4: ahci [ 0.505246] scsi host5: ahci [ 0.505268] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 26 [ 0.505269] ata2: DUMMY [ 0.505270] ata3: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a200 irq 26 [ 0.505272] ata4: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a280 irq 26 [ 0.505272] ata5: DUMMY [ 0.505273] ata6: DUMMY [ 0.505315] libphy: Fixed MDIO Bus: probed [ 0.505368] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.505374] ehci-pci: EHCI PCI platform driver [ 0.505383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.505385] ohci-pci: OHCI PCI platform driver [ 0.505391] uhci_hcd: USB Universal Host Controller Interface driver [ 0.505470] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.505497] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.506568] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.506571] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.506628] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.506629] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.506630] usb usb1: Product: xHCI Host Controller [ 0.506631] usb usb1: Manufacturer: Linux 4.5.3-300.fc24.x86_64 xhci-hcd [ 0.506631] usb usb1: SerialNumber: 0000:00:14.0 [ 0.506698] hub 1-0:1.0: USB hub found [ 0.506711] hub 1-0:1.0: 14 ports detected [ 0.508822] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.508847] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.508869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.508870] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.508871] usb usb2: Product: xHCI Host Controller [ 0.508872] usb usb2: Manufacturer: Linux 4.5.3-300.fc24.x86_64 xhci-hcd [ 0.508872] usb usb2: SerialNumber: 0000:00:14.0 [ 0.508931] hub 2-0:1.0: USB hub found [ 0.508941] hub 2-0:1.0: 6 ports detected [ 0.509637] usbcore: registered new interface driver usbserial [ 0.509641] usbcore: registered new interface driver usbserial_generic [ 0.509644] usbserial: USB Serial support registered for generic [ 0.509662] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.510018] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.510020] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.510080] mousedev: PS/2 mouse device common for all mice [ 0.510217] rtc_cmos 00:02: RTC can wake from S4 [ 0.510395] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.510419] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.510453] device-mapper: uevent: version 1.0.3 [ 0.510583] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 0.510750] Intel P-state driver initializing. [ 0.511922] hidraw: raw HID events driver (C) Jiri Kosina [ 0.512036] usbcore: registered new interface driver usbhid [ 0.512040] usbhid: USB HID core driver [ 0.512220] drop_monitor: Initializing network drop monitor service [ 0.512415] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.512558] Initializing XFRM netlink socket [ 0.512954] NET: Registered protocol family 10 [ 0.513533] mip6: Mobile IPv6 [ 0.513547] NET: Registered protocol family 17 [ 0.514277] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514290] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514330] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514358] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514400] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514421] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514464] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514493] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1e [ 0.514587] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.514637] AVX2 version of gcm_enc/dec engaged. [ 0.514639] AES CTR mode by8 optimization enabled [ 0.537742] registered taskstats version 1 [ 0.537755] Loading compiled-in X.509 certificates [ 0.538236] Loaded X.509 cert 'Fedora kernel signing key: ce12e08e5a39200cdeacd206db7b99cb7806db1b' [ 0.538252] zswap: loaded using pool lzo/zbud [ 0.538609] Magic number: 0:7:877 [ 0.538735] rtc_cmos 00:02: setting system clock to 2016-05-11 08:53:02 UTC (1462956782) [ 0.538817] PM: Hibernation image not present or could not be loaded. [ 0.808493] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.808508] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.808521] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.808708] ata1.00: ATA-8: OCZ-VECTOR150, 1.2, max UDMA/133 [ 0.808710] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.809826] ata3.00: ATA-9: ST4000NM0033-9ZM170, SN06, max UDMA/133 [ 0.809828] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.810865] ata3.00: configured for UDMA/133 [ 0.811076] ata1.00: configured for UDMA/133 [ 0.811081] usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd [ 0.811226] scsi 0:0:0:0: Direct-Access ATA OCZ-VECTOR150 1.2 PQ: 0 ANSI: 5 [ 0.817113] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.817138] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 0.817300] sd 0:0:0:0: [sda] Write Protect is off [ 0.817302] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.817306] scsi 2:0:0:0: Direct-Access ATA ST4000NM0033-9ZM SN06 PQ: 0 ANSI: 5 [ 0.817324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.818520] sda: sda1 sda2 sda3 sda4 [ 0.818789] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.823679] usb 2-5: New USB device found, idVendor=2109, idProduct=0812 [ 0.823681] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.823682] usb 2-5: Product: USB 3.0 HUB [ 0.823683] usb 2-5: Manufacturer: VLI Labs, Inc. [ 0.826180] hub 2-5:1.0: USB hub found [ 0.826299] hub 2-5:1.0: 4 ports detected [ 0.829133] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 0.829185] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 0.829319] sd 2:0:0:0: [sdb] Write Protect is off [ 0.829320] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.829394] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.847803] sd 2:0:0:0: [sdb] Attached SCSI disk [ 0.861006] usb 1-9: new high-speed USB device number 2 using xhci_hcd [ 0.881255] ata4.00: ATA-9: ST4000NM0033-9ZM170, SN06, max UDMA/133 [ 0.881257] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.882295] ata4.00: configured for UDMA/133 [ 0.882462] scsi 3:0:0:0: Direct-Access ATA ST4000NM0033-9ZM SN06 PQ: 0 ANSI: 5 [ 0.888157] sd 3:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 0.888192] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 0.888364] sd 3:0:0:0: [sdc] Write Protect is off [ 0.888365] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 0.888450] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.929932] sdc: sdc1 [ 0.930454] sd 3:0:0:0: [sdc] Attached SCSI disk [ 0.931305] Freeing unused kernel memory: 1552K (ffffffff81d4f000 - ffffffff81ed3000) [ 0.931307] Write protecting the kernel read-only data: 12288k [ 0.931504] Freeing unused kernel memory: 160K (ffff8800017d8000 - ffff880001800000) [ 0.932370] Freeing unused kernel memory: 588K (ffff880001b6d000 - ffff880001c00000) [ 0.951255] random: systemd urandom read with 28 bits of entropy available [ 0.953469] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 0.953620] systemd[1]: Detected architecture x86-64. [ 0.953622] systemd[1]: Running in initial RAM disk. [ 0.953627] systemd[1]: No hostname configured. [ 0.953630] systemd[1]: Set hostname to . [ 0.953648] systemd[1]: Initializing machine ID from random generator. [ 0.984953] systemd[1]: Reached target Local File Systems. [ 0.984985] systemd[1]: Reached target Timers. [ 0.984992] systemd[1]: Reached target Swap. [ 0.985009] systemd[1]: Listening on udev Kernel Socket. [ 0.985027] systemd[1]: Listening on udev Control Socket. [ 0.985047] systemd[1]: Listening on Journal Socket (/dev/log). [ 0.985064] systemd[1]: Listening on Journal Socket. [ 0.985073] systemd[1]: Reached target Encrypted Volumes. [ 0.985108] systemd[1]: Listening on Journal Audit Socket. [ 0.985280] systemd[1]: Created slice System Slice. [ 0.985290] systemd[1]: Reached target Slices. [ 0.993103] systemd[1]: Starting Setup Virtual Console... [ 0.993424] systemd[1]: Starting Journal Service... [ 0.993847] systemd[1]: Starting Apply Kernel Variables... [ 0.994212] systemd[1]: Starting dracut cmdline hook... [ 0.994602] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 0.995313] systemd[1]: Started Setup Virtual Console. [ 0.995350] audit: type=1130 audit(1462956782.955:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 0.995450] systemd[1]: Started Apply Kernel Variables. [ 0.995461] audit: type=1130 audit(1462956782.955:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 0.995562] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 0.995571] audit: type=1130 audit(1462956782.955:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.004100] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.005863] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.005896] audit: type=1130 audit(1462956782.965:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.011614] systemd[1]: Started Journal Service. [ 1.011657] audit: type=1130 audit(1462956782.971:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.026353] usb 1-9: New USB device found, idVendor=2109, idProduct=2812 [ 1.026354] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.026355] usb 1-9: Product: USB 2.0 HUB [ 1.026832] hub 1-9:1.0: USB hub found [ 1.027119] hub 1-9:1.0: 4 ports detected [ 1.055786] audit: type=1130 audit(1462956783.015:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.072753] Loading iSCSI transport class v2.0-870. [ 1.073054] audit: type=1130 audit(1462956783.033:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=iscsid comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.085929] RPC: Registered named UNIX socket transport module. [ 1.085931] RPC: Registered udp transport module. [ 1.085931] RPC: Registered tcp transport module. [ 1.085932] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.121980] audit: type=1130 audit(1462956783.082:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.139446] audit: type=1130 audit(1462956783.099:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1.216599] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.234790] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.234797] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.235290] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90003148000, 94:de:80:6b:dd:24, XID 0c900800 IRQ 28 [ 1.235292] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.242896] [drm] Initialized drm 1.1.0 20060810 [ 1.244158] 8021q: 802.1Q VLAN Support v1.8 [ 1.266198] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.272950] raid6: sse2x1 gen() 11085 MB/s [ 1.289945] raid6: sse2x1 xor() 9359 MB/s [ 1.293911] [drm] Memory usable by graphics device = 2048M [ 1.293913] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.293914] fb: switching to inteldrmfb from EFI VGA [ 1.293928] Console: switching to colour dummy device 80x25 [ 1.294003] [drm] Replacing VGA console driver [ 1.300052] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.300053] [drm] Driver supports precise vblank timestamp query. [ 1.300250] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.306943] raid6: sse2x2 gen() 15050 MB/s [ 1.309953] usb 1-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.323944] raid6: sse2x2 xor() 9652 MB/s [ 1.340942] raid6: sse2x4 gen() 17644 MB/s [ 1.357940] raid6: sse2x4 xor() 12310 MB/s [ 1.374940] raid6: avx2x1 gen() 23765 MB/s [ 1.391936] raid6: avx2x2 gen() 27296 MB/s [ 1.395280] usb 1-9.1: New USB device found, idVendor=1a40, idProduct=0201 [ 1.395282] usb 1-9.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.395283] usb 1-9.1: Product: USB 2.0 Hub [MTT] [ 1.395639] hub 1-9.1:1.0: USB hub found [ 1.395665] hub 1-9.1:1.0: 7 ports detected [ 1.408937] raid6: avx2x4 gen() 29144 MB/s [ 1.408938] raid6: using algorithm avx2x4 gen() 29144 MB/s [ 1.408939] raid6: using avx2x2 recovery algorithm [ 1.410122] xor: automatically using best checksumming function: [ 1.410399] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.410837] acpi device:60: registered as cooling_device13 [ 1.410908] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.410982] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0 [ 1.419935] avx : 28008.000 MB/sec [ 1.455286] Btrfs loaded [ 1.455632] BTRFS: device fsid a22dd8bc-24ef-4f97-bb62-01fcd7c3f11c devid 1 transid 25 /dev/sda4 [ 1.456716] BTRFS: device label home devid 1 transid 2332788 /dev/sdc1 [ 1.471938] tsc: Refined TSC clocksource calibration: 3392.144 MHz [ 1.471940] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5517d4e4, max_idle_ns: 440795261668 ns [ 1.510757] fbcon: inteldrmfb (fb0) is primary device [ 1.657928] usb 1-9.1.1: new low-speed USB device number 4 using xhci_hcd [ 1.666966] Console: switching to colour frame buffer device 240x67 [ 1.669475] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.726091] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.739714] usb 1-9.1.1: New USB device found, idVendor=046d, idProduct=c326 [ 1.739717] usb 1-9.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.739718] usb 1-9.1.1: Product: USB Keyboard [ 1.739719] usb 1-9.1.1: Manufacturer: Logitech [ 1.745278] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.1/1-9.1.1:1.0/0003:046D:C326.0001/input/input6 [ 1.796222] hid-generic 0003:046D:C326.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-9.1.1/input0 [ 1.801635] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.1/1-9.1.1:1.1/0003:046D:C326.0002/input/input7 [ 1.852062] hid-generic 0003:046D:C326.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-9.1.1/input1 [ 1.913927] usb 1-9.1.2: new high-speed USB device number 5 using xhci_hcd [ 1.988073] usb 1-9.1.2: New USB device found, idVendor=12d1, idProduct=14fe [ 1.988075] usb 1-9.1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.988076] usb 1-9.1.2: Product: HUAWEI Mobile [ 1.988077] usb 1-9.1.2: Manufacturer: HUAWEI Technology [ 1.993802] usb-storage 1-9.1.2:1.0: USB Mass Storage device detected [ 1.993876] scsi host6: usb-storage 1-9.1.2:1.0 [ 1.993949] usb-storage 1-9.1.2:1.1: USB Mass Storage device detected [ 1.993999] scsi host7: usb-storage 1-9.1.2:1.1 [ 1.994045] usbcore: registered new interface driver usb-storage [ 1.995642] usbcore: registered new interface driver uas [ 2.051907] usb 1-9.1.3: new full-speed USB device number 6 using xhci_hcd [ 2.061808] systemd-journald[216]: Received SIGTERM from PID 1 (systemd). [ 2.126395] usb 1-9.1.3: New USB device found, idVendor=046d, idProduct=08d9 [ 2.126397] usb 1-9.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.137514] SELinux: 32768 avtab hash slots, 104588 rules. [ 2.146420] SELinux: 32768 avtab hash slots, 104588 rules. [ 2.161875] SELinux: 8 users, 14 roles, 4988 types, 306 bools, 1 sens, 1024 cats [ 2.161877] SELinux: 92 classes, 104588 rules [ 2.163579] SELinux: Permission validate_trans in class security not defined in policy. [ 2.163636] SELinux: the above unknown classes and permissions will be allowed [ 2.163640] SELinux: Completing initialization. [ 2.163641] SELinux: Setting up existing superblocks. [ 2.172594] systemd[1]: Successfully loaded SELinux policy in 54.014ms. [ 2.188889] usb 1-9.1.4: new full-speed USB device number 7 using xhci_hcd [ 2.194976] systemd[1]: Relabelled /dev and /run in 11.081ms. [ 2.318678] EXT4-fs (sda1): re-mounted. Opts: (null) [ 2.390603] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.474824] parport_pc 00:06: reported by Plug and Play ACPI [ 2.474950] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 2.475465] clocksource: Switched to clocksource tsc [ 2.479096] usb 1-9.1.4: New USB device found, idVendor=0a12, idProduct=0001 [ 2.479098] usb 1-9.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.479100] usb 1-9.1.4: Product: BT2.0 [ 2.499500] random: nonblocking pool is initialized [ 2.521131] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.521487] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.521561] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255) [ 2.521565] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.541873] usb 1-9.1.6: new full-speed USB device number 8 using xhci_hcd [ 2.566771] iTCO_vendor_support: vendor-support=0 [ 2.567129] Adding 62494716k swap on /dev/sda2. Priority:-1 extents:1 across:62494716k SSFS [ 2.572596] ppdev: user-space parallel port driver [ 2.574321] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.574350] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 2.603546] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.603666] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.603895] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 2.604042] snd_hda_intel 0000:05:00.0: enabling device (0000 -> 0002) [ 2.604073] snd_hda_intel 0000:05:00.0: Disabling MSI [ 2.604074] snd_hda_intel 0000:05:00.0: Force to non-snoop mode [ 2.618696] usb 1-9.1.6: New USB device found, idVendor=046d, idProduct=c52b [ 2.618700] usb 1-9.1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.618702] usb 1-9.1.6: Product: USB Receiver [ 2.618703] usb 1-9.1.6: Manufacturer: Logitech [ 2.626323] snd_hda_codec_ca0132 hdaudioC2D1: autoconfig for CA0132: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 2.626327] snd_hda_codec_ca0132 hdaudioC2D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.626329] snd_hda_codec_ca0132 hdaudioC2D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.626330] snd_hda_codec_ca0132 hdaudioC2D1: mono: mono_out=0x0 [ 2.626331] snd_hda_codec_ca0132 hdaudioC2D1: inputs: [ 2.626333] snd_hda_codec_ca0132 hdaudioC2D1: Mic=0x12 [ 2.626440] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [ 2.626517] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 2.626569] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 2.630062] snd_hda_intel 0000:05:00.0: Direct firmware load for ctefx.bin failed with error -2 [ 2.631261] intel_rapl: Found RAPL domain package [ 2.631264] intel_rapl: Found RAPL domain core [ 2.631266] intel_rapl: Found RAPL domain uncore [ 2.631267] intel_rapl: Found RAPL domain dram [ 2.632934] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 2.632937] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.632938] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.632940] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 2.632941] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0 [ 2.632942] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 2.632944] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 2.632946] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 2.632948] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 2.656446] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 2.656528] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 2.656639] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 2.656779] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 2.656920] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 2.661312] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 2.661369] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 2.661412] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 2.662458] systemd-journald[704]: Received request to flush runtime journal from PID 1 [ 2.688870] usb 1-9.1.7: new high-speed USB device number 9 using xhci_hcd [ 2.765641] usb 1-9.1.7: New USB device found, idVendor=13fe, idProduct=3623 [ 2.765643] usb 1-9.1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.765644] usb 1-9.1.7: Product: silicon-power [ 2.765645] usb 1-9.1.7: Manufacturer: [ 2.765646] usb 1-9.1.7: SerialNumber: 10090526E6A90E000F3B01F8 [ 2.766295] usb-storage 1-9.1.7:1.0: USB Mass Storage device detected [ 2.766489] scsi host8: usb-storage 1-9.1.7:1.0 [ 2.785549] media: Linux media interface: v0.10 [ 2.788222] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9.1.6/input2 [ 2.793734] Linux video capture interface: v2.00 [ 2.796987] gspca_main: v2.14.0 registered [ 2.799366] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d9 [ 2.804590] Bluetooth: Core ver 2.21 [ 2.804601] NET: Registered protocol family 31 [ 2.804602] Bluetooth: HCI device and connection manager initialized [ 2.804604] Bluetooth: HCI socket layer initialized [ 2.804606] Bluetooth: L2CAP socket layer initialized [ 2.804611] Bluetooth: SCO socket layer initialized [ 2.810825] usbcore: registered new interface driver btusb [ 2.898451] input: Logitech T400 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.6/1-9.1.6:1.2/0003:046D:C52B.0005/0003:046D:4026.0006/input/input19 [ 2.898605] logitech-hidpp-device 0003:046D:4026.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech T400] on usb-0000:00:14.0-9.1.6:1 [ 2.996906] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 2.997492] scsi 7:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2 [ 2.999188] sr 6:0:0:0: [sr0] scsi-1 drive [ 2.999190] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.999377] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 2.999461] sr 6:0:0:0: Attached scsi generic sg3 type 5 [ 2.999762] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 3.003692] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 3.647257] input: gspca_zc3xx as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.3/input/input20 [ 3.647429] usbcore: registered new interface driver gspca_zc3xx [ 3.662243] usbcore: registered new interface driver snd-usb-audio [ 3.768770] scsi 8:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS [ 3.769137] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 3.769652] sd 8:0:0:0: [sde] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 3.771319] sd 8:0:0:0: [sde] Write Protect is off [ 3.771321] sd 8:0:0:0: [sde] Mode Sense: 03 41 00 00 [ 3.773011] sd 8:0:0:0: [sde] No Caching mode page found [ 3.773013] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 3.778793] sde: sde1 [ 3.783116] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 3.835610] SGI XFS with ACLs, security attributes, no debug enabled [ 3.855694] XFS (sdb): Mounting V5 Filesystem [ 3.961160] XFS (sdb): Ending clean mount [ 4.125015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.125018] Bluetooth: BNEP filters: protocol multicast [ 4.125021] Bluetooth: BNEP socket layer initialized [ 4.438255] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.457459] Ebtables v2.0 registered [ 4.477709] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 4.547759] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 4.560078] Netfilter messages via NETLINK v0.30. [ 4.563541] ip_set: protocol 6 [ 4.595419] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 4.691806] r8169 0000:02:00.0 enp2s0: link down [ 4.691808] r8169 0000:02:00.0 enp2s0: link down [ 4.691863] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 5.374940] tun: Universal TUN/TAP device driver, 1.6 [ 5.374942] tun: (C) 1999-2004 Max Krasnyansky [ 5.413028] device virbr0-nic entered promiscuous mode [ 5.521671] virbr0: port 1(virbr0-nic) entered listening state [ 5.521680] virbr0: port 1(virbr0-nic) entered listening state [ 5.559613] virbr0: port 1(virbr0-nic) entered disabled state [ 5.577044] device virbr0-nic left promiscuous mode [ 5.577071] virbr0: port 1(virbr0-nic) entered disabled state [ 7.011547] r8169 0000:02:00.0 enp2s0: link up [ 7.011556] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 13.364660] fuse init (API version 7.24) [ 13.914609] Bluetooth: RFCOMM TTY layer initialized [ 13.914614] Bluetooth: RFCOMM socket layer initialized [ 13.914666] Bluetooth: RFCOMM ver 1.11 [ 15.394181] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 15.400251] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 15.403965] ISOFS: changing to secondary root [ 22.854357] show_signal_msg: 225 callbacks suppressed [ 22.854370] tracker-extract[2110]: segfault at fffffffffffffff7 ip 00007fd6083e5aa2 sp 00007ffcb775a670 error 5 in libc-2.23.so[7fd608364000+1b9000] [ 139.307575] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 7583.450694] perf interrupt took too long (2545 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [23685.771325] mmap: chrome (27557): VmData 2149265408 exceed data ulimit 2147483647. Will be forbidden soon. [38745.797537] device tap0 entered promiscuous mode [38745.797720] virbr0: port 1(tap0) entered listening state [38745.797726] virbr0: port 1(tap0) entered listening state [38747.797969] virbr0: port 1(tap0) entered learning state [38749.801843] virbr0: topology change detected, propagating [38749.801847] virbr0: port 1(tap0) entered forwarding state [38786.832224] virbr0: port 1(tap0) entered disabled state [38786.833732] device tap0 left promiscuous mode [38786.833744] virbr0: port 1(tap0) entered disabled state [39402.688373] device tap0 entered promiscuous mode [39402.688518] virbr0: port 1(tap0) entered listening state [39402.688524] virbr0: port 1(tap0) entered listening state [39404.694008] virbr0: port 1(tap0) entered learning state [39406.697875] virbr0: topology change detected, propagating [39406.697885] virbr0: port 1(tap0) entered forwarding state [39440.028330] virbr0: port 1(tap0) entered disabled state [39440.029694] device tap0 left promiscuous mode [39440.029703] virbr0: port 1(tap0) entered disabled state [52732.084421] chrome[29943]: segfault at fbadbeef ip 000055bfba592ac1 sp 00007ffd87e2b080 error 6 in chrome[55bfb6845000+5e39000] [65804.646683] BTRFS info (device sdc1): disk space caching is enabled [65841.438796] [drm:i915_hangcheck_elapsed [i915]] *ERROR* Hangcheck timer elapsed... render ring idle [65864.223798] usb 1-9: USB disconnect, device number 2 [65864.223801] usb 1-9.1: USB disconnect, device number 3 [65864.223802] usb 1-9.1.1: USB disconnect, device number 4 [65864.224005] gspca_zc3xx 1-9.1.3:1.0: URB error -71, resubmitting [65864.224006] gspca_main: Resubmit URB failed with error -19 [65864.241479] usb 2-5: USB disconnect, device number 2 [65864.307445] usb 1-9.1.2: USB disconnect, device number 5 [65864.371789] usb 1-9.1.3: USB disconnect, device number 6 [65864.401531] usb 1-9.1.4: USB disconnect, device number 7 [65864.404558] usb 1-9.1.6: USB disconnect, device number 8 [65864.486858] usb 1-9.1.7: USB disconnect, device number 9 [65873.490933] usb 2-5: new SuperSpeed USB device number 3 using xhci_hcd [65873.503424] usb 2-5: New USB device found, idVendor=2109, idProduct=0812 [65873.503426] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [65873.503427] usb 2-5: Product: USB 3.0 HUB [65873.503428] usb 2-5: Manufacturer: VLI Labs, Inc. [65873.505110] hub 2-5:1.0: USB hub found [65873.505224] hub 2-5:1.0: 4 ports detected [65873.727763] usb 1-9: new high-speed USB device number 10 using xhci_hcd [65873.892924] usb 1-9: New USB device found, idVendor=2109, idProduct=2812 [65873.892927] usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [65873.892929] usb 1-9: Product: USB 2.0 HUB [65873.893466] hub 1-9:1.0: USB hub found [65873.893754] hub 1-9:1.0: 4 ports detected [65874.176759] usb 1-9.1: new high-speed USB device number 11 using xhci_hcd [65874.261904] usb 1-9.1: New USB device found, idVendor=1a40, idProduct=0201 [65874.261906] usb 1-9.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [65874.261907] usb 1-9.1: Product: USB 2.0 Hub [MTT] [65874.262378] hub 1-9.1:1.0: USB hub found [65874.262430] hub 1-9.1:1.0: 7 ports detected [65874.525714] usb 1-9.1.1: new low-speed USB device number 12 using xhci_hcd [65874.607376] usb 1-9.1.1: New USB device found, idVendor=046d, idProduct=c326 [65874.607378] usb 1-9.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [65874.607379] usb 1-9.1.1: Product: USB Keyboard [65874.607380] usb 1-9.1.1: Manufacturer: Logitech [65874.613456] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.1/1-9.1.1:1.0/0003:046D:C326.0007/input/input21 [65874.664050] hid-generic 0003:046D:C326.0007: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-9.1.1/input0 [65874.669508] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.1/1-9.1.1:1.1/0003:046D:C326.0008/input/input22 [65874.721065] hid-generic 0003:046D:C326.0008: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-9.1.1/input1 [65874.783681] usb 1-9.1.3: new full-speed USB device number 13 using xhci_hcd [65874.858174] usb 1-9.1.3: New USB device found, idVendor=046d, idProduct=08d9 [65874.858177] usb 1-9.1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [65874.859059] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08d9 [65875.706162] input: gspca_zc3xx as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.3/input/input23 [65875.770620] usb 1-9.1.4: new full-speed USB device number 14 using xhci_hcd [65876.024234] usb 1-9.1.4: New USB device found, idVendor=0a12, idProduct=0001 [65876.024236] usb 1-9.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [65876.024237] usb 1-9.1.4: Product: BT2.0 [65876.087602] usb 1-9.1.6: new full-speed USB device number 15 using xhci_hcd [65876.163893] usb 1-9.1.6: New USB device found, idVendor=046d, idProduct=c52b [65876.163896] usb 1-9.1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [65876.163897] usb 1-9.1.6: Product: USB Receiver [65876.163898] usb 1-9.1.6: Manufacturer: Logitech [65876.171024] logitech-djreceiver 0003:046D:C52B.000B: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9.1.6/input2 [65876.281053] input: Logitech T400 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1.6/1-9.1.6:1.2/0003:046D:C52B.000B/0003:046D:4026.000C/input/input24 [65876.281457] logitech-hidpp-device 0003:046D:4026.000C: input,hidraw3: USB HID v1.11 Keyboard [Logitech T400] on usb-0000:00:14.0-9.1.6:1 [65876.294965] Bluetooth: hci0 hardware error 0x37 [65876.336601] usb 1-9.1.7: new high-speed USB device number 16 using xhci_hcd [65876.415771] usb 1-9.1.7: New USB device found, idVendor=13fe, idProduct=3623 [65876.415774] usb 1-9.1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [65876.415775] usb 1-9.1.7: Product: silicon-power [65876.415776] usb 1-9.1.7: Manufacturer: [65876.415777] usb 1-9.1.7: SerialNumber: 10090526E6A90E000F3B01F8 [65876.416395] usb-storage 1-9.1.7:1.0: USB Mass Storage device detected [65876.416457] scsi host9: usb-storage 1-9.1.7:1.0 [65877.440804] scsi 9:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS [65877.441496] sd 9:0:0:0: Attached scsi generic sg3 type 0 [65877.941458] sd 9:0:0:0: [sdd] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB) [65877.943128] sd 9:0:0:0: [sdd] Write Protect is off [65877.943130] sd 9:0:0:0: [sdd] Mode Sense: 23 00 00 00 [65877.944851] sd 9:0:0:0: [sdd] No Caching mode page found [65877.944854] sd 9:0:0:0: [sdd] Assuming drive cache: write through [65877.966348] sdd: sdd1 [65877.970658] sd 9:0:0:0: [sdd] Attached SCSI removable disk [65882.034260] usb 1-9.1.2: new high-speed USB device number 17 using xhci_hcd [65882.107798] usb 1-9.1.2: New USB device found, idVendor=12d1, idProduct=14fe [65882.107800] usb 1-9.1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [65882.107801] usb 1-9.1.2: Product: HUAWEI Mobile [65882.107802] usb 1-9.1.2: Manufacturer: HUAWEI Technology [65882.148379] usb-storage 1-9.1.2:1.0: USB Mass Storage device detected [65882.148638] scsi host10: usb-storage 1-9.1.2:1.0 [65882.148789] usb-storage 1-9.1.2:1.1: USB Mass Storage device detected [65882.148942] scsi host11: usb-storage 1-9.1.2:1.1 [65883.150829] scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [65883.151016] scsi 11:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2 [65883.151832] sr 10:0:0:0: [sr0] scsi-1 drive [65883.152105] sr 10:0:0:0: Attached scsi CD-ROM sr0 [65883.152216] sr 10:0:0:0: Attached scsi generic sg4 type 5 [65883.152912] sd 11:0:0:0: Attached scsi generic sg5 type 0 [65883.153872] sd 11:0:0:0: [sde] Attached SCSI removable disk [65901.443125] [drm] no progress on render ring [65901.443547] [drm] GPU HANG: ecode 7:-1:0x00000000, reason: Ring hung, action: reset [65901.443548] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [65901.443548] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [65901.443549] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [65901.443549] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [65901.443550] [drm] GPU crash dump saved to /sys/class/drm/card0/error [65901.443645] [drm:intel_rcs_ctx_init [i915]] *ERROR* init render state: -11 [65901.443662] [drm:i915_switch_context [i915]] *ERROR* ring init context: -11 [65901.445731] drm/i915: Resetting chip after gpu hang [65907.434743] [drm] stuck on render ring [65907.435283] [drm] GPU HANG: ecode 7:0:0xf3cffffe, in totem [28936], reason: Ring hung, action: reset [65907.437399] drm/i915: Resetting chip after gpu hang [65913.435389] [drm] stuck on render ring [65913.435910] [drm] GPU HANG: ecode 7:0:0xf3cffffe, in totem [28936], reason: Ring hung, action: reset [65913.437355] drm/i915: Resetting chip after gpu hang [65914.880862] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [65914.894529] ISO 9660 Extensions: Microsoft Joliet Level 1 [65914.895204] ISOFS: changing to secondary root