[ 0.000000] Linux version 4.6.0-rc7-drm-intel-nightly-ww20-commit-dd7de1c+ (gfx@GM-GFX-QA02) (gcc version 4.9.3 (Ubuntu 4.9.3-8ubuntu2~14.04) ) #1 SMP Thu May 12 07:13:59 CDT 2016 [ 0.000000] Command line: vmlinuz root=/dev/sda2 initrd=initrd.img acpi_enforce_resources=lax processor.max_cstate=2 no_console_suspend log_buf_len=4M i915.enable_rc6=0 i915.preliminary_hw_support=1 drm.debug=14 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000012152000-0x0000000078223fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078224000-0x0000000079fd3fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079fd4000-0x000000007a033fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a034000-0x000000007a070fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007a071000-0x000000007a2a8fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a2a9000-0x000000007a2a9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a2aa000-0x000000007a2d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a2d4000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e006a000-0x00000000e006afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by EDK II [ 0.000000] efi: ACPI=0x7a070000 ACPI 2.0=0x7a070014 ESRT=0x79fa3000 SMBIOS=0x7841b000 SMBIOS 3.0=0x78419000 PROP=0x7a295dc0 [ 0.000000] efi: requested map not found. [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 0100000000 mask 7F00000000 write-back [ 0.000000] 4 base 0200000000 mask 7F80000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 8112M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G [ 0.000000] e820: update [mem 0x7b000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE [ 0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE [ 0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE [ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE [ 0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE [ 0.000000] BRK [0x02020000, 0x02020fff] PGTABLE [ 0.000000] log_buf_len: 4194304 bytes [ 0.000000] early log buf free: 257256(98%) [ 0.000000] RAMDISK: [mem 0x73018000-0x74df1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007A070014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x000000007A047188 000104 (v01 INTEL EDK2 00000003 BRXT 01000013) [ 0.000000] ACPI: FACP 0x000000007A068000 00010C (v05 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160108/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160108/tbfadt-704) [ 0.000000] ACPI: DSDT 0x000000007A05A000 0088DD (v02 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: FACS 0x000000007A022000 000040 [ 0.000000] ACPI: SSDT 0x000000007A06E000 0003C6 (v02 INTEL Tpm2Tabl 00001000 INTL 20150818) [ 0.000000] ACPI: TPM2 0x000000007A06D000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: UEFI 0x000000007A02A000 000042 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: BDAT 0x000000007A06C000 000030 (v02 00000000 00000000) [ 0.000000] ACPI: OEM0 0x000000007A06B000 000084 (v05 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: DBG2 0x000000007A06A000 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: DMAR 0x000000007A069000 0000B0 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: HPET 0x000000007A067000 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: LPIT 0x000000007A066000 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: APIC 0x000000007A065000 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: MCFG 0x000000007A064000 00003C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: NPKT 0x000000007A063000 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x000000007A04F000 005023 (v02 INTEL RVPRtd3 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x000000007A04E000 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x000000007A04C000 0016EF (v01 Intel_ Platform 00001000 INTL 20150818) [ 0.000000] ACPI: EM_1 0x000000007A04A000 000029 (v00 INTEL OEM1 00000005 INTL 0100000D) [ 0.000000] ACPI: OEM1 0x000000007A049000 000040 (v01 INTEL ENRGYMGT 00000005 INTL 0100000D) [ 0.000000] ACPI: PIDV 0x000000007A048000 0000DC (v02 00000002 BRXT 0100000D) [ 0.000000] ACPI: RSCI 0x000000007A06F000 000030 (v02 INTEL BOOTSRC 00000001 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x000000007A04B000 0004E0 (v02 PmRef Cpu0Ist 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x000000007A046000 000729 (v02 CpuRef CpuSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x000000007A045000 000343 (v02 PmRef Cpu0Tst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x000000007A044000 00017C (v02 PmRef ApTst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x000000007A041000 0027A7 (v02 SaSsdt SaSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: FPDT 0x000000007A040000 000044 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: WDAT 0x000000007A059000 000104 (v01 00000000 00000000) [ 0.000000] ACPI: NHLT 0x000000007A057000 001A50 (v00 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x27fbfa000-0x27fbfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000effffff] [ 0.000000] node 0: [mem 0x0000000012152000-0x0000000078223fff] [ 0.000000] node 0: [mem 0x000000007a071000-0x000000007a2a8fff] [ 0.000000] node 0: [mem 0x000000007a2d4000-0x000000007affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2056146 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7489 pages used for memmap [ 0.000000] DMA32 zone: 479286 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff] [ 0.000000] PM: Registered nosave memory: [mem 0x78224000-0x79fd3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79fd4000-0x7a033fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a034000-0x7a070fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a2a9000-0x7a2a9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a2aa000-0x7a2d3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xe0069fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe006a000-0xe006afff] [ 0.000000] PM: Registered nosave memory: [mem 0xe006b000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xe0069fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88027f800000 s99032 r8192 d32040 u524288 [ 0.000000] pcpu-alloc: s99032 r8192 d32040 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2023996 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vmlinuz root=/dev/sda2 initrd=initrd.img acpi_enforce_resources=lax processor.max_cstate=2 no_console_suspend log_buf_len=4M i915.enable_rc6=0 i915.preliminary_hw_support=1 drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:830 warn_invalid_dmar.part.7+0x78/0x90 [ 0.000000] Your BIOS is broken; DMAR reported at address 0! BIOS vendor: Intel Corp.; Ver: APLKRVPA.X64.0129.B10.1603140006; Product Version: A0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc7-drm-intel-nightly-ww20-commit-dd7de1c+ #1 [ 0.000000] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0129.B10.1603140006 03/14/2016 [ 0.000000] 0000000000000000 ffffffff81c03d58 ffffffff813c76c3 ffffffff81c03da8 [ 0.000000] 0000000000000000 ffffffff81c03d98 ffffffff8107d571 0000033e81da5053 [ 0.000000] 0000000000000000 ffffffff81a8a0aa ffffffff8201a00c ffffffff8201a424 [ 0.000000] Call Trace: [ 0.000000] [] dump_stack+0x63/0x90 [ 0.000000] [] __warn+0xd1/0xf0 [ 0.000000] [] warn_slowpath_fmt_taint+0x47/0x50 [ 0.000000] [] ? early_ioremap+0x13/0x15 [ 0.000000] [] ? __acpi_map_table+0x13/0x18 [ 0.000000] [] warn_invalid_dmar.part.7+0x78/0x90 [ 0.000000] [] dmar_validate_one_drhd+0xa0/0xe0 [ 0.000000] [] dmar_walk_remapping_entries+0x83/0x1a0 [ 0.000000] [] detect_intel_iommu+0x52/0xd1 [ 0.000000] [] ? xen_swiotlb_init+0x490/0x490 [ 0.000000] [] pci_iommu_alloc+0x4a/0x6c [ 0.000000] [] mem_init+0x17/0x9d [ 0.000000] [] start_kernel+0x21e/0x45e [ 0.000000] [] ? early_idt_handler_array+0x120/0x120 [ 0.000000] [] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [] x86_64_start_kernel+0x13b/0x14a [ 0.000000] ---[ end trace 0465df53cce555fc ]--- [ 0.000000] Memory: 7934404K/8224584K available (8147K kernel code, 1363K rwdata, 3688K rodata, 1504K init, 1292K bss, 290180K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4980.517 MHz processor [ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 9961.03 BogoMIPS (lpj=19922068) [ 0.000033] pid_max: default: 32768 minimum: 301 [ 0.000038] ACPI: Core revision 20160108 [ 0.009641] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.009971] Security Framework initialized [ 0.009974] Yama: becoming mindful. [ 0.009980] AppArmor: AppArmor initialized [ 0.010261] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.011331] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011817] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011825] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011971] CPU: Physical Processor ID: 0 [ 0.011974] CPU: Processor Core ID: 0 [ 0.011985] mce: CPU supports 7 MCE banks [ 0.012002] CPU0: Thermal monitoring enabled (TM1) [ 0.012016] process: using mwait in idle threads [ 0.012019] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.012020] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.012720] Freeing SMP alternatives memory: 32K (ffffffff81ece000 - ffffffff81ed6000) [ 0.017003] ftrace: allocating 31986 entries in 125 pages [ 0.035934] smpboot: Max logical packages: 1 [ 0.035939] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.035947] DMAR: Host address width 39 [ 0.035949] DMAR: DRHD base: 0x00000000000000 flags: 0x0 [ 0.035951] DMAR: Parse DMAR table failure. [ 0.036282] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.037594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077283] TSC deadline timer enabled [ 0.077286] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x8) [ 0.077298] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.077304] ... version: 4 [ 0.077306] ... bit width: 48 [ 0.077307] ... generic registers: 4 [ 0.077309] ... value mask: 0000ffffffffffff [ 0.077310] ... max period: 0000ffffffffffff [ 0.077312] ... fixed-purpose events: 3 [ 0.077314] ... event mask: 000000070000000f [ 0.077732] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.077807] x86: Booting SMP configuration: [ 0.077810] .... node #0, CPUs: #1 #2 #3 [ 0.319403] x86: Booted up 1 node, 4 CPUs [ 0.319407] smpboot: Total of 4 processors activated (39851.76 BogoMIPS) [ 0.320250] devtmpfs: initialized [ 0.320290] x86/mm: Memory block size: 128MB [ 0.321970] evm: security.selinux [ 0.321973] evm: security.SMACK64 [ 0.321974] evm: security.SMACK64EXEC [ 0.321976] evm: security.SMACK64TRANSMUTE [ 0.321977] evm: security.SMACK64MMAP [ 0.321979] evm: security.ima [ 0.321980] evm: security.capability [ 0.322039] PM: Registering ACPI NVS region [mem 0x79fd4000-0x7a033fff] (393216 bytes) [ 0.322046] PM: Registering ACPI NVS region [mem 0x7a2a9000-0x7a2a9fff] (4096 bytes) [ 0.322088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.322132] pinctrl core: initialized pinctrl subsystem [ 0.322216] RTC time: 0:38:18, date: 01/01/98 [ 0.323210] NET: Registered protocol family 16 [ 0.333367] cpuidle: using governor ladder [ 0.345373] cpuidle: using governor menu [ 0.345383] PCCT header not found. [ 0.345468] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.345471] ACPI: bus type PCI registered [ 0.345473] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.345521] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.345524] PCI: not using MMCONFIG [ 0.345526] PCI: Using configuration type 1 for base access [ 0.357507] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.357511] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.357703] ACPI: Added _OSI(Module Device) [ 0.357706] ACPI: Added _OSI(Processor Device) [ 0.357708] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.357709] ACPI: Added _OSI(Processor Aggregator Device) [ 0.357928] ACPI: Executed 5 blocks of module-level executable AML code [ 0.361379] ACPI: Dynamic OEM Table Load: [ 0.361386] ACPI: SSDT 0xFFFF880275819B40 000099 (v02 PmRef Cpu0Cst 00003001 INTL 20150818) [ 0.361826] ACPI: Dynamic OEM Table Load: [ 0.361832] ACPI: SSDT 0xFFFF88027593B200 00015F (v02 PmRef ApIst 00003000 INTL 20150818) [ 0.362200] ACPI: Dynamic OEM Table Load: [ 0.362206] ACPI: SSDT 0xFFFF880275819C00 00008D (v02 PmRef ApCst 00003000 INTL 20150818) [ 0.362920] ACPI : EC: EC started [ 0.527535] ACPI: Interpreter enabled [ 0.527550] ACPI: (supports S0 S3 S4 S5) [ 0.527553] ACPI: Using IOAPIC for interrupt routing [ 0.527574] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.527843] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 0.527850] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.528698] ACPI: Power Resource [PXP] (off) [ 0.528958] ACPI: Power Resource [PXP] (on) [ 0.547718] ACPI: Power Resource [PXP] (on) [ 0.567691] ACPI: Power Resource [PXP] (off) [ 0.567910] ACPI: Power Resource [PXP] (off) [ 0.568129] ACPI: Power Resource [PXP] (off) [ 0.568401] ACPI: Power Resource [SPPR] (on) [ 0.587589] ACPI: Power Resource [ODPR] (on) [ 0.587679] ACPI: Power Resource [SPPR] (on) [ 0.607599] ACPI: Power Resource [ODPR] (on) [ 0.607736] ACPI: Power Resource [UPPR] (on) [ 0.607881] ACPI: Power Resource [UPPR] (on) [ 0.608027] ACPI: Power Resource [UPPR] (on) [ 0.608170] ACPI: Power Resource [UPPR] (on) [ 0.608315] ACPI: Power Resource [UPPR] (on) [ 0.608463] ACPI: Power Resource [UPPR] (on) [ 0.608610] ACPI: Power Resource [UPPR] (on) [ 0.608757] ACPI: Power Resource [UPPR] (on) [ 0.608907] ACPI: Power Resource [UPPR] (on) [ 0.609054] ACPI: Power Resource [UPPR] (on) [ 0.609201] ACPI: Power Resource [UPPR] (on) [ 0.609345] ACPI: Power Resource [UPPR] (on) [ 0.609488] ACPI: Power Resource [UPPR] (on) [ 0.609632] ACPI: Power Resource [UPPR] (on) [ 0.609776] ACPI: Power Resource [UPPR] (on) [ 0.609893] ACPI: Power Resource [USBC] (on) [ 0.609958] ACPI: Power Resource [SDPR] (on) [ 0.627703] ACPI: Power Resource [LSPR] (on) [ 0.629033] ACPI: Power Resource [PAUD] (on) [ 0.630686] ACPI: Power Resource [FN00] (on) [ 0.639771] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.639776] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.640185] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.640189] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.640198] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.640499] PCI host bridge to bus 0000:00 [ 0.640502] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.640505] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.640507] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.640509] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.640511] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.640514] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.640517] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.640520] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] [ 0.640523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] [ 0.640526] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.640532] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000 [ 0.640670] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000 [ 0.640676] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.640680] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.640682] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.640811] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000 [ 0.640816] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit] [ 0.640945] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300 [ 0.640954] pci 0000:00:0e.0: reg 0x10: [mem 0x92518000-0x9251bfff 64bit] [ 0.640966] pci 0000:00:0e.0: reg 0x20: [mem 0x92200000-0x922fffff 64bit] [ 0.640991] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 0.641109] pci 0000:00:0e.0: System wakeup disabled by ACPI [ 0.641135] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000 [ 0.641146] pci 0000:00:0f.0: reg 0x10: [mem 0x92520000-0x92520fff 64bit] [ 0.641188] pci 0000:00:0f.0: PME# supported from D3hot [ 0.641301] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007 [ 0.641311] pci 0000:00:11.0: reg 0x10: [mem 0x9251c000-0x9251dfff 64bit] [ 0.641317] pci 0000:00:11.0: reg 0x18: [mem 0x92523000-0x92523fff 64bit] [ 0.641449] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601 [ 0.641455] pci 0000:00:12.0: reg 0x10: [mem 0x9251e000-0x9251ffff] [ 0.641458] pci 0000:00:12.0: reg 0x14: [mem 0x92539000-0x925390ff] [ 0.641461] pci 0000:00:12.0: reg 0x18: [io 0x2080-0x2087] [ 0.641464] pci 0000:00:12.0: reg 0x1c: [io 0x2088-0x208b] [ 0.641467] pci 0000:00:12.0: reg 0x20: [io 0x2060-0x207f] [ 0.641470] pci 0000:00:12.0: reg 0x24: [mem 0x92537000-0x925377ff] [ 0.641488] pci 0000:00:12.0: PME# supported from D3hot [ 0.641609] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400 [ 0.641635] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.641756] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.641791] pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400 [ 0.641825] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 0.641948] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.641979] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330 [ 0.641991] pci 0000:00:15.0: reg 0x10: [mem 0x92500000-0x9250ffff 64bit] [ 0.642014] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 0.642106] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.642131] pci 0000:00:15.1: [8086:5aaa] type 00 class 0x0c03fe [ 0.642138] pci 0000:00:15.1: reg 0x10: [mem 0x92000000-0x921fffff 64bit] [ 0.642144] pci 0000:00:15.1: reg 0x18: [mem 0x92524000-0x92524fff 64bit] [ 0.642164] pci 0000:00:15.1: PME# supported from D0 D3hot [ 0.642279] pci 0000:00:15.1: System wakeup disabled by ACPI [ 0.642313] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000 [ 0.642322] pci 0000:00:16.0: reg 0x10: [mem 0x92525000-0x92525fff 64bit] [ 0.642452] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000 [ 0.642460] pci 0000:00:16.1: reg 0x10: [mem 0x92526000-0x92526fff 64bit] [ 0.642590] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000 [ 0.642598] pci 0000:00:16.2: reg 0x10: [mem 0x92527000-0x92527fff 64bit] [ 0.642732] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000 [ 0.642741] pci 0000:00:16.3: reg 0x10: [mem 0x92528000-0x92528fff 64bit] [ 0.642878] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000 [ 0.642886] pci 0000:00:17.0: reg 0x10: [mem 0x92529000-0x92529fff 64bit] [ 0.643016] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000 [ 0.643023] pci 0000:00:17.1: reg 0x10: [mem 0x9252a000-0x9252afff 64bit] [ 0.643157] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000 [ 0.643165] pci 0000:00:17.2: reg 0x10: [mem 0x9252b000-0x9252bfff 64bit] [ 0.643303] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000 [ 0.643311] pci 0000:00:17.3: reg 0x10: [mem 0x9252c000-0x9252cfff 64bit] [ 0.643445] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000 [ 0.643454] pci 0000:00:18.0: reg 0x10: [mem 0x9252d000-0x9252dfff 64bit] [ 0.643588] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000 [ 0.643596] pci 0000:00:18.1: reg 0x10: [mem 0x9252e000-0x9252efff 64bit] [ 0.643730] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000 [ 0.643738] pci 0000:00:18.2: reg 0x10: [mem 0x9252f000-0x9252ffff 64bit] [ 0.643875] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000 [ 0.643883] pci 0000:00:18.3: reg 0x10: [mem 0x92530000-0x92530fff 64bit] [ 0.644016] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000 [ 0.644024] pci 0000:00:19.0: reg 0x10: [mem 0x92531000-0x92531fff 64bit] [ 0.644154] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000 [ 0.644162] pci 0000:00:19.1: reg 0x10: [mem 0x92532000-0x92532fff 64bit] [ 0.644295] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000 [ 0.644303] pci 0000:00:19.2: reg 0x10: [mem 0x92533000-0x92533fff 64bit] [ 0.644446] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501 [ 0.644453] pci 0000:00:1b.0: reg 0x10: [mem 0x92534000-0x92534fff 64bit] [ 0.644588] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501 [ 0.644595] pci 0000:00:1c.0: reg 0x10: [mem 0x92535000-0x92535fff 64bit] [ 0.644730] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501 [ 0.644737] pci 0000:00:1e.0: reg 0x10: [mem 0x92536000-0x92536fff 64bit] [ 0.644870] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100 [ 0.645023] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 [ 0.645037] pci 0000:00:1f.1: reg 0x10: [mem 0x92538000-0x925380ff 64bit] [ 0.645057] pci 0000:00:1f.1: reg 0x20: [io 0x2040-0x205f] [ 0.645224] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.645234] pci 0000:01:00.0: reg 0x10: [mem 0x92400000-0x9241ffff] [ 0.645244] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f] [ 0.645251] pci 0000:01:00.0: reg 0x1c: [mem 0x92420000-0x92423fff] [ 0.645298] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.645320] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.651563] pci 0000:00:13.0: PCI bridge to [bus 01] [ 0.651567] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 0.651568] pci 0000:00:13.0: bridge window [mem 0x92400000-0x924fffff] [ 0.651675] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.651822] pci 0000:02:00.0: reg 0x10: [mem 0x92300000-0x92301fff 64bit] [ 0.651886] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 0.651979] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.652071] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.659612] pci 0000:00:14.0: PCI bridge to [bus 02] [ 0.659624] pci 0000:00:14.0: bridge window [mem 0x92300000-0x923fffff] [ 0.661081] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661120] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661156] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661192] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661227] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661263] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661298] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661334] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.661873] ACPI: Enabled 2 GPEs in block 00 to 7F [ 0.661913] ACPI : EC: GPE = 0x2b, I/O: command/status = 0x66, data = 0x62 [ 0.661999] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.662004] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.662010] vgaarb: loaded [ 0.662012] vgaarb: bridge control possible 0000:00:02.0 [ 0.662161] SCSI subsystem initialized [ 0.662195] libata version 3.00 loaded. [ 0.662208] ACPI: bus type USB registered [ 0.662220] usbcore: registered new interface driver usbfs [ 0.662228] usbcore: registered new interface driver hub [ 0.662238] usbcore: registered new device driver usb [ 0.662349] PCI: Using ACPI for IRQ routing [ 0.664101] PCI: pci_cache_line_size set to 64 bytes [ 0.664239] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.664241] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.664241] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff] [ 0.664242] e820: reserve RAM buffer [mem 0x78224000-0x7bffffff] [ 0.664243] e820: reserve RAM buffer [mem 0x7a2a9000-0x7bffffff] [ 0.664244] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 0.664308] NetLabel: Initializing [ 0.664310] NetLabel: domain hash size = 128 [ 0.664312] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.664320] NetLabel: unlabeled traffic allowed by default [ 0.664423] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.664428] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 0.664928] clocksource: Switched to clocksource hpet [ 0.668537] VFS: Disk quotas dquot_6.6.0 [ 0.668551] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.668604] AppArmor: AppArmor Filesystem Enabled [ 0.668652] pnp: PnP ACPI init [ 0.668747] system 00:00: [io 0x06a4] has been reserved [ 0.668749] system 00:00: [io 0x06a0] has been reserved [ 0.668753] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.668812] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io 0x1000-0x1fff] [ 0.668833] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.668836] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.668838] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.668840] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.668843] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.668865] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.668886] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.669080] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.669083] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.669086] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.669088] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.669090] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.669092] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.669095] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved [ 0.669097] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.669099] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.669102] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.669229] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.669305] pnp: PnP ACPI: found 6 devices [ 0.675492] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.675514] pci 0000:00:13.0: PCI bridge to [bus 01] [ 0.675517] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 0.675520] pci 0000:00:13.0: bridge window [mem 0x92400000-0x924fffff] [ 0.675525] pci 0000:00:14.0: PCI bridge to [bus 02] [ 0.675531] pci 0000:00:14.0: bridge window [mem 0x92300000-0x923fffff] [ 0.675540] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.675541] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.675542] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.675543] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.675544] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.675545] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.675546] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.675547] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window] [ 0.675548] pci_bus 0000:00: resource 12 [mem 0x80000000-0xcfffffff window] [ 0.675549] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.675550] pci_bus 0000:01: resource 1 [mem 0x92400000-0x924fffff] [ 0.675551] pci_bus 0000:02: resource 1 [mem 0x92300000-0x923fffff] [ 0.675567] NET: Registered protocol family 2 [ 0.675666] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.675746] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.675823] TCP: Hash tables configured (established 65536 bind 65536) [ 0.675847] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.675865] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.675912] NET: Registered protocol family 1 [ 0.675926] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.676123] PCI: CLS 64 bytes, default 64 [ 0.676153] Trying to unpack rootfs image as initramfs... [ 0.956117] Freeing initrd memory: 30568K (ffff880073018000 - ffff880074df2000) [ 0.956138] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.956141] software IO TLB [mem 0x6f018000-0x73018000] (64MB) mapped at [ffff88006f018000-ffff880073017fff] [ 0.956243] Scanning for low memory corruption every 60 seconds [ 0.956456] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.956473] audit: initializing netlink subsys (disabled) [ 0.956482] audit: type=2000 audit(4039375098.071:1): initialized [ 0.956666] Initialise system trusted keyring [ 0.956747] workingset: timestamp_bits=38 max_order=21 bucket_order=0 [ 0.957764] zbud: loaded [ 0.958106] fuse init (API version 7.24) [ 0.958202] Key type big_key registered [ 0.958610] Key type asymmetric registered [ 0.958613] Asymmetric key parser 'x509' registered [ 0.958637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.958670] io scheduler noop registered [ 0.958672] io scheduler deadline registered (default) [ 0.958692] io scheduler cfq registered [ 0.958864] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt [ 0.958867] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.958870] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded [ 0.958883] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt [ 0.958886] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.958892] pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded [ 0.958896] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.958901] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.958924] efifb: probing for efifb [ 0.958934] efifb: framebuffer at 0x80000000, mapped to 0xffffc90001000000, using 8100k, total 8100k [ 0.958937] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.958938] efifb: scrolling: redraw [ 0.958940] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.962232] Console: switching to colour frame buffer device 240x67 [ 0.965471] fb0: EFI VGA frame buffer device [ 0.965487] intel_idle: does not run on family 6 model 92 [ 0.965540] ACPI: AC Adapter [ADP1] (off-line) [ 0.965586] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.965721] ACPI: Lid Switch [LID0] [ 0.965759] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.965780] ACPI: Power Button [PWRB] [ 0.965812] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.965835] ACPI: Power Button [PWRF] [ 0.965887] ACPI: processor limited to max C-state 2 [ 0.965921] Monitor-Mwait will be used to enter C-1 state [ 0.965932] Monitor-Mwait will be used to enter C-2 state [ 0.965940] Monitor-Mwait will be used to enter C-3 state [ 0.967949] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.967966] ACPI: Thermal Zone [TZ01] (33 C) [ 0.968003] GHES: HEST is not enabled! [ 0.968079] ACPI: Battery Slot [BAT0] (battery present) [ 0.968110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.968116] ACPI: Battery Slot [BAT1] (battery absent) [ 0.988213] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.989531] Linux agpgart interface v0.103 [ 0.991864] brd: module loaded [ 0.992834] loop: module loaded [ 0.992980] libphy: Fixed MDIO Bus: probed [ 0.992993] tun: Universal TUN/TAP device driver, 1.6 [ 0.993005] tun: (C) 1999-2004 Max Krasnyansky [ 0.993059] PPP generic driver version 2.4.2 [ 0.993119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.993137] ehci-pci: EHCI PCI platform driver [ 0.993158] ehci-platform: EHCI generic platform driver [ 0.993178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.993195] ohci-pci: OHCI PCI platform driver [ 0.993211] ohci-platform: OHCI generic platform driver [ 0.993232] uhci_hcd: USB Universal Host Controller Interface driver [ 0.993335] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 0.993353] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 0.994417] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.994440] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported [ 0.994484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.994502] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.994519] usb usb1: Product: xHCI Host Controller [ 0.994531] usb usb1: Manufacturer: Linux 4.6.0-rc7-drm-intel-nightly-ww20-commit-dd7de1c+ xhci-hcd [ 0.994557] usb usb1: SerialNumber: 0000:00:15.0 [ 0.994654] hub 1-0:1.0: USB hub found [ 0.994674] hub 1-0:1.0: 8 ports detected [ 0.995104] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 0.995123] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 0.995967] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.996764] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.997543] usb usb2: Product: xHCI Host Controller [ 0.998337] usb usb2: Manufacturer: Linux 4.6.0-rc7-drm-intel-nightly-ww20-commit-dd7de1c+ xhci-hcd [ 0.999157] usb usb2: SerialNumber: 0000:00:15.0 [ 1.000044] hub 2-0:1.0: USB hub found [ 1.000867] hub 2-0:1.0: 7 ports detected [ 1.002074] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.003205] i8042: Warning: Keylock active [ 1.005175] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.005986] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.006916] mousedev: PS/2 mouse device common for all mice [ 1.007908] rtc_cmos 00:05: RTC can wake from S4 [ 1.008854] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.009674] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.010492] i2c /dev entries driver [ 1.011333] device-mapper: uevent: version 1.0.3 [ 1.012201] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.013031] ledtrig-cpu: registered to indicate activity on CPUs [ 1.013835] EFI Variables Facility v0.08 2004-May-17 [ 1.018167] NET: Registered protocol family 10 [ 1.019115] NET: Registered protocol family 17 [ 1.019915] Key type dns_resolver registered [ 1.020880] microcode: CPU0 sig=0x506c8, pf=0x1, revision=0x10 [ 1.021700] microcode: CPU1 sig=0x506c8, pf=0x1, revision=0x10 [ 1.022486] microcode: CPU2 sig=0x506c8, pf=0x1, revision=0x10 [ 1.023294] microcode: CPU3 sig=0x506c8, pf=0x1, revision=0x10 [ 1.024090] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.025000] registered taskstats version 1 [ 1.025740] Loading compiled-in X.509 certificates [ 1.028408] Loaded X.509 cert 'Build time autogenerated kernel key: fc85554dbe29551baef849ed60d585077fd2866e' [ 1.029186] zswap: loaded using pool lzo/zbud [ 1.031286] Key type trusted registered [ 1.034616] Key type encrypted registered [ 1.035386] AppArmor: AppArmor sha1 policy hashing enabled [ 1.036140] ima: No TPM chip found, activating TPM-bypass! [ 1.036910] evm: HMAC attrs: 0x1 [ 1.038036] Magic number: 2:624:606 [ 1.038912] rtc_cmos 00:05: setting system clock to 2098-01-01 00:38:21 UTC (4039375101) [ 1.040102] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.040853] EDD information not available. [ 1.041626] PM: Hibernation image not present or could not be loaded. [ 1.042559] Freeing unused kernel memory: 1504K (ffffffff81d56000 - ffffffff81ece000) [ 1.043338] Write protecting the kernel read-only data: 12288k [ 1.044262] Freeing unused kernel memory: 28K (ffff8800017f9000 - ffff880001800000) [ 1.045655] Freeing unused kernel memory: 408K (ffff880001b9a000 - ffff880001c00000) [ 1.056062] random: systemd-udevd urandom read with 5 bits of entropy available [ 1.061489] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 1.071884] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.093790] hidraw: raw HID events driver (C) Jiri Kosina [ 1.098342] ahci 0000:00:12.0: version 3.0 [ 1.099841] [drm] Initialized drm 1.1.0 20060810 [ 1.100703] pps_core: LinuxPPS API ver. 1 registered [ 1.101267] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.101268] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 1.103089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.103923] scsi host0: ahci [ 1.104797] ata1: SATA max UDMA/133 abar m2048@0x92537000 port 0x92537100 irq 123 [ 1.105666] PTP clock support registered [ 1.106567] sdhci: Secure Digital Host Controller Interface driver [ 1.107406] sdhci: Copyright(c) Pierre Ossman [ 1.108338] dca service started, version 1.12.1 [ 1.109407] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.110237] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.111050] usb 1-2: Product: USB2.0 Hub [ 1.111928] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev 3) [ 1.112546] hub 1-2:1.0: USB hub found [ 1.112614] hub 1-2:1.0: 4 ports detected [ 1.114477] sdhci-pci 0000:00:1b.0: failed to setup card detect gpio [ 1.114525] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.114525] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.121798] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit [ 1.122648] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev 3) [ 1.123525] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 1.124383] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.127775] pps pps0: new PPS source ptp0 [ 1.128758] igb 0000:01:00.0: added PHC on eth0 [ 1.129468] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 1.129480] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev 3) [ 1.131345] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.132210] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:40 [ 1.133046] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.133636] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit [ 1.134731] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 1.135841] Setting dangerous option enable_rc6 - tainting kernel [ 1.136807] Setting dangerous option preliminary_hw_support - tainting kernel [ 1.138732] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 1.139875] [drm:intel_detect_pch] No PCH found. [ 1.139878] [drm:get_allowed_dc_mask] Allowed DC state mask 09 [ 1.139887] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x5a84 rev=0x03 flags=need_gfx_hws,is_broxton,is_preliminary,has_fbc,has_hotplug,has_ddi,has_fpga_dbg, [ 1.139955] [drm:intel_device_info_runtime_init] slice total: 1 [ 1.139956] [drm:intel_device_info_runtime_init] subslice total: 3 [ 1.139957] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 1.139957] [drm:intel_device_info_runtime_init] EU total: 18 [ 1.139958] [drm:intel_device_info_runtime_init] EU per subslice: 6 [ 1.139959] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.139959] [drm:intel_device_info_runtime_init] has subslice power gating: y [ 1.139960] [drm:intel_device_info_runtime_init] has EU power gating: y [ 1.139961] [drm:intel_device_info_runtime_init] ppgtt mode: 3 [ 1.140082] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.140083] [drm] Memory usable by graphics device = 4096M [ 1.140966] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 1.140967] [drm:i915_ggtt_init_hw] GTT stolen size = 64M [ 1.141058] checking generic (80000000 7e9000) vs hw (80000000 10000000) [ 1.141059] fb: switching to inteldrmfb from EFI VGA [ 1.142030] Console: switching to colour dummy device 80x25 [ 1.142157] [drm] Replacing VGA console driver [ 1.142235] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7a01d018 [ 1.142240] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.142240] [drm:intel_opregion_setup] ASLE supported [ 1.142243] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA) [ 1.142264] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.142266] [drm] Driver supports precise vblank timestamp query. [ 1.142268] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 1.142269] [drm:intel_bios_init] VBT signature "$VBT BROXTON ", BDB version 201 [ 1.142270] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 1.142271] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.142272] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [ 1.142273] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [ 1.142274] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.142275] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.142277] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.142277] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 1.142278] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180 [ 1.142279] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 1.142280] [drm:parse_device_mapping] Expected child device config size for VBT version 201 not known; assuming 38 [ 1.142281] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.142283] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.142284] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.142285] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.142285] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8 [ 1.142286] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.142287] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8 [ 1.142309] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.142313] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.142315] [drm:intel_power_well_enable] enabling power well 1 [ 1.142317] [drm:broxton_init_cdclk] CDCLK already enabled, won't reprogram it [ 1.142329] [drm:broxton_phy_init] DDI PHY 1 already enabled, won't reprogram it [ 1.142330] [drm:broxton_phy_init] DDI PHY 0 not enabled, enabling it [ 1.142364] [drm:intel_power_well_enable] enabling always-on [ 1.142365] [drm:intel_power_well_enable] enabling DC off [ 1.142365] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.142377] [drm:intel_power_well_enable] enabling power well 2 [ 1.142379] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.142396] [drm:intel_csr_ucode_init] Loading i915/bxt_dmc_ver1.bin [ 1.142418] [drm] Refusing to load old DMC firmware v1.4, please upgrade to v1.7 or later [https://01.org/linuxgraphics/intel-linux-graphics-firmwares]. [ 1.142423] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management. [ 1.146826] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 1.147679] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 22 (22.0 usec) [ 1.147681] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 22 (22.0 usec) [ 1.147682] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 22 (22.0 usec) [ 1.147683] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 49 (49.0 usec) [ 1.147684] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 49 (49.0 usec) [ 1.147685] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 49 (49.0 usec) [ 1.147685] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 49 (49.0 usec) [ 1.147686] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 49 (49.0 usec) [ 1.147687] [drm:intel_modeset_init] 3 display pipes available. [ 1.147701] [drm:intel_update_cdclk] Current CD clock rate: 144000 kHz [ 1.147701] [drm:intel_update_max_cdclk] Max CD clock rate: 624000 kHz [ 1.147702] [drm:intel_update_max_cdclk] Max dotclock rate: 624000 kHz [ 1.147708] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.148014] [drm:intel_ddi_init] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing [ 1.148016] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.148053] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000 [ 1.148055] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.148056] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 1.148056] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.148058] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.148125] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.148127] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f [ 1.148236] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.148397] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.148478] [drm:intel_dp_get_dpcd] EDP DPCD : 02 fb c7 [ 1.148479] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.148481] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.148482] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.148483] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.148484] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 [ 1.149341] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.149343] [drm:intel_dp_drrs_init] Downclock mode is not found. DRRS not supported [ 1.149348] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 67764/96000 [ 1.149355] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.149376] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.149459] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.149476] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 1.149554] [drm:intel_dsi_init] [ 1.149566] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled [ 1.149568] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled [ 1.149570] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled [ 1.149575] [drm:intel_modeset_readout_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000001, on 1 [ 1.149576] [drm:intel_modeset_readout_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0 [ 1.149577] [drm:intel_modeset_readout_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0 [ 1.149580] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.149581] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: enabled, pipe A [ 1.149582] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: disabled, pipe A [ 1.149583] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe A [ 1.149584] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe B [ 1.149585] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP MST-50] hw state readout: disabled, pipe C [ 1.149586] [drm:intel_modeset_readout_hw_state] [ENCODER:53:TMDS-53] hw state readout: disabled, pipe A [ 1.149586] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP MST-55] hw state readout: disabled, pipe A [ 1.149587] [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP MST-56] hw state readout: disabled, pipe B [ 1.149588] [drm:intel_modeset_readout_hw_state] [ENCODER:57:DP MST-57] hw state readout: disabled, pipe C [ 1.149590] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:eDP-1] hw state readout: enabled [ 1.149591] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-1] hw state readout: disabled [ 1.149592] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled [ 1.149593] [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:DP-2] hw state readout: disabled [ 1.149594] [drm:intel_modeset_readout_hw_state] [CONNECTOR:58:HDMI-A-2] hw state readout: disabled [ 1.149606] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880074bc9000 for pipe A [ 1.149607] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1.149608] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.149609] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.149610] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 1.149611] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.149611] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.149612] [drm:intel_dump_pipe_config] requested mode: [ 1.149613] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa [ 1.149614] [drm:intel_dump_pipe_config] adjusted mode: [ 1.149615] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa [ 1.149616] [drm:intel_dump_crtc_timings] crtc timings: 138119 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x40 flags: 0xa [ 1.149617] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.149618] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.149619] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.149619] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.149620] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.149621] [drm:intel_dump_pipe_config] ips: 0 [ 1.149621] [drm:intel_dump_pipe_config] double wide: 0 [ 1.149623] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 1.149623] [drm:intel_dump_pipe_config] planes on this crtc [ 1.149625] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1 [ 1.149626] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1.149626] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1.149627] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = -1 [ 1.149629] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff880074bca000 for pipe B [ 1.149629] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.149630] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.149631] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.149632] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.149633] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.149633] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.149634] [drm:intel_dump_pipe_config] requested mode: [ 1.149635] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.149636] [drm:intel_dump_pipe_config] adjusted mode: [ 1.149637] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.149638] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.149638] [drm:intel_dump_pipe_config] port clock: 0 [ 1.149639] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.149640] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.149641] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.149641] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.149642] [drm:intel_dump_pipe_config] ips: 0 [ 1.149643] [drm:intel_dump_pipe_config] double wide: 0 [ 1.149644] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.149644] [drm:intel_dump_pipe_config] planes on this crtc [ 1.149645] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = -1 [ 1.149646] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = -1 [ 1.149647] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = -1 [ 1.149648] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = -1 [ 1.149649] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff880074bcb000 for pipe C [ 1.149650] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.149650] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.149651] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.149652] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.149653] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.149654] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.149654] [drm:intel_dump_pipe_config] requested mode: [ 1.149656] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.149656] [drm:intel_dump_pipe_config] adjusted mode: [ 1.149657] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.149658] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.149659] [drm:intel_dump_pipe_config] port clock: 0 [ 1.149660] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.149660] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.149661] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.149662] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.149663] [drm:intel_dump_pipe_config] ips: 0 [ 1.149663] [drm:intel_dump_pipe_config] double wide: 0 [ 1.149664] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.149665] [drm:intel_dump_pipe_config] planes on this crtc [ 1.149666] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = -1 [ 1.149667] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = -1 [ 1.149668] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = -1 [ 1.149685] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.149687] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.149689] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.149692] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880270fe8000 [ 1.149743] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.149744] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.186901] [drm:i915_gem_context_init] LR context support initialized [ 1.186914] [drm:intel_init_pipe_control] render ring pipe control offset: 0x007ea000 [ 1.186919] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.186921] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=16384 [ 1.186943] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.186944] [drm:i915_pages_create_for_stolen] offset=0x7ed000, size=16384 [ 1.186951] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.186952] [drm:i915_pages_create_for_stolen] offset=0x7f1000, size=16384 [ 1.186961] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.186962] [drm:i915_pages_create_for_stolen] offset=0x7f5000, size=16384 [ 1.186973] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1.186993] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1.187010] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1.187027] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1.187049] [drm] RC6 disabled, disabling runtime PM support [ 1.187053] [drm:intel_update_cdclk] Current CD clock rate: 144000 kHz [ 1.187079] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.187080] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 1.187081] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 1.187082] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 1.187082] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 1.187084] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400 [ 1.187085] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400) [ 1.187085] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 1.187086] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 1.187087] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 1.187090] [drm:bxt_hpd_irq_setup] Invert bit setting: hp_ctl:18001818 hp_port:38 [ 1.187098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.187100] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.187186] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.187268] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.187328] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 1.187383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] status updated from unknown to connected [ 1.187392] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.187394] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.187395] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.187396] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.187397] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.187399] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] status updated from unknown to disconnected [ 1.187399] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] disconnected [ 1.187400] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.187401] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.188208] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a [ 1.188211] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.190569] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.192737] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.192807] [drm] Initialized i915 1.6.0 20160508 for 0000:00:02.0 on minor 0 [ 1.197717] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x47ca8f6b82d, max_idle_ns: 440795358426 ns [ 1.210999] usb 1-2.1: new high-speed USB device number 4 using xhci_hcd [ 1.228448] mmc1: new HS400 MMC card at address 0001 [ 1.229813] mmcblk1: mmc1:0001 CGND3R 58.2 GiB [ 1.229914] mmcblk1boot0: mmc1:0001 CGND3R partition 1 4.00 MiB [ 1.230024] mmcblk1boot1: mmc1:0001 CGND3R partition 2 4.00 MiB [ 1.230108] mmcblk1rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB [ 1.230605] [drm:intel_hdmi_detect] HDMI live status down [ 1.230608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected [ 1.230611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.230612] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.230613] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.230617] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] status updated from unknown to disconnected [ 1.230617] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] disconnected [ 1.230618] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.230620] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.230620] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.231083] mmcblk1: p1 p2 p3 p4 [ 1.234356] ata1.00: ATA-9: INTEL SSDSC2BW080A4, DC32, max UDMA/133 [ 1.234360] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.238235] usb 1-2.1: New USB device found, idVendor=413c, idProduct=1010 [ 1.238240] usb 1-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.238243] usb 1-2.1: Product: USB 2.0 Hub [MTT] [ 1.240325] hub 1-2.1:1.0: USB hub found [ 1.240336] hub 1-2.1:1.0: 4 ports detected [ 1.242829] ata1.00: configured for UDMA/133 [ 1.244544] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW08 DC32 PQ: 0 ANSI: 5 [ 1.268429] [drm:intel_hdmi_detect] HDMI live status down [ 1.268432] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] status updated from unknown to disconnected [ 1.268433] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.268436] [drm:drm_setup_crtcs] [ 1.268437] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.268438] [drm:drm_enable_connectors] connector 47 enabled? no [ 1.268439] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.268439] [drm:drm_enable_connectors] connector 54 enabled? no [ 1.268440] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.268442] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.268442] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.268444] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 [ 1.268444] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.268445] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.268446] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.268446] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.268447] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.268449] [drm:intelfb_create] re-using BIOS fb [ 1.268453] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff880270fe8000 [ 1.268480] [drm:drm_fb_helper_hotplug_event] [ 1.268481] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.268482] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.268509] fbcon: inteldrmfb (fb0) is primary device [ 1.268543] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.268558] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.268602] sd 0:0:0:0: [sda] Write Protect is off [ 1.268603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.268620] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.269649] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.269726] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.269819] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.269821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.269823] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.269823] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.269824] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.269825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] disconnected [ 1.269825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.269826] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.270227] sda: sda1 sda2 sda3 [ 1.270540] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.271606] usb 1-2.2: new low-speed USB device number 5 using xhci_hcd [ 1.310576] usb 1-2.2: New USB device found, idVendor=04b3, idProduct=310c [ 1.310577] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.310577] usb 1-2.2: Product: USB Optical Mouse [ 1.317136] [drm:intel_hdmi_detect] HDMI live status down [ 1.317138] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.317139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.317139] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.317141] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] disconnected [ 1.317141] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.317142] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.332343] usb 1-2.1.4: new low-speed USB device number 6 using xhci_hcd [ 1.378769] usb 1-2.1.4: New USB device found, idVendor=413c, idProduct=2110 [ 1.378769] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.378770] usb 1-2.1.4: Product: Dell Wired Multimedia Keyboard [ 1.378771] usb 1-2.1.4: Manufacturer: Dell [ 1.393882] usb 1-2.4: new high-speed USB device number 7 using xhci_hcd [ 1.404608] [drm:intel_hdmi_detect] HDMI live status down [ 1.404610] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.404614] [drm:drm_setup_crtcs] [ 1.404615] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.404615] [drm:drm_enable_connectors] connector 47 enabled? no [ 1.404616] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.404616] [drm:drm_enable_connectors] connector 54 enabled? no [ 1.404616] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.404618] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.404618] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.404619] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 [ 1.404619] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.404620] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.404620] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.404620] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.404621] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.404635] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 1.404635] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.404637] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1.404638] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 1.404640] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 1.404640] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 1.404641] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.404643] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880270598000 for pipe A [ 1.404643] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1.404643] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.404644] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.404645] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 1.404645] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.404646] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.404646] [drm:intel_dump_pipe_config] requested mode: [ 1.404647] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.404647] [drm:intel_dump_pipe_config] adjusted mode: [ 1.404648] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.404649] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 1.404649] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.404650] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.404650] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.404650] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.404651] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.404651] [drm:intel_dump_pipe_config] ips: 0 [ 1.404651] [drm:intel_dump_pipe_config] double wide: 0 [ 1.404653] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 1.404653] [drm:intel_dump_pipe_config] planes on this crtc [ 1.404654] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [ 1.404655] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = 0x34325258 [ 1.404655] [drm:intel_dump_pipe_config] scaler:-1 src (0, 0) 1920x1080 dst (0, 0) 1920x1080 [ 1.404656] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1 [ 1.404656] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1 [ 1.404657] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = -1 [ 1.404658] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 1.404660] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1.404661] [drm:bxt_get_dpll] CRTC:26 using pre-allocated PORT PLL A [ 1.404661] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 1.404662] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31 [ 1.407764] [drm:intel_edp_backlight_off] [ 1.441447] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large: [ 1.441448] clocksource: 'hpet' wd_now: 70791fe wd_last: 6850be5 mask: ffffffff [ 1.441448] clocksource: 'tsc' cs_now: bf01211a2 cs_last: bd0756d90 mask: ffffffffffffffff [ 1.470913] usb 1-2.4: New USB device found, idVendor=0b95, idProduct=7720 [ 1.470914] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.470914] usb 1-2.4: Product: AX88772 [ 1.470915] usb 1-2.4: SerialNumber: 00D92D [ 1.474637] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.474644] [drm:intel_disable_pipe] disabling pipe A [ 1.476494] usbcore: registered new interface driver usbhid [ 1.476494] usbhid: USB HID core driver [ 1.476991] [drm:edp_panel_off] Turn eDP port A panel power off [ 1.476993] [drm:wait_panel_off] Wait for panel power off time [ 1.476995] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000060 [ 1.477588] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:04B3:310C.0001/input/input7 [ 1.477746] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:15.0-2.2/input0 [ 1.477825] input: Dell Dell Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/0003:413C:2110.0002/input/input8 [ 1.492963] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 1.492963] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1.492964] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1.492975] [drm:wait_panel_status] Wait complete [ 1.492977] [drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 26 [ 1.492982] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1.492982] [drm:intel_disable_shared_dpll] disabling PORT PLL A [ 1.496558] hid-generic 0003:413C:2110.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:15.0-2.1.4/input0 [ 1.496658] input: Dell Dell Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/0003:413C:2110.0003/input/input9 [ 1.497027] [drm:intel_update_cdclk] Current CD clock rate: 288000 kHz [ 1.497027] [drm:verify_encoder_state] [ENCODER:38:TMDS-38] [ 1.497028] [drm:verify_encoder_state] [ENCODER:46:TMDS-46] [ 1.497030] [drm:verify_encoder_state] [ENCODER:48:DP MST-48] [ 1.497030] [drm:verify_encoder_state] [ENCODER:49:DP MST-49] [ 1.497030] [drm:verify_encoder_state] [ENCODER:50:DP MST-50] [ 1.497031] [drm:verify_encoder_state] [ENCODER:53:TMDS-53] [ 1.497031] [drm:verify_encoder_state] [ENCODER:55:DP MST-55] [ 1.497032] [drm:verify_encoder_state] [ENCODER:56:DP MST-56] [ 1.497032] [drm:verify_encoder_state] [ENCODER:57:DP MST-57] [ 1.497032] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 1.497033] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 1.497034] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 1.497034] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 1.497035] [drm:verify_single_dpll_state] PORT PLL A [ 1.497036] [drm:verify_single_dpll_state] PORT PLL B [ 1.497036] [drm:verify_single_dpll_state] PORT PLL C [ 1.497037] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 1.497038] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 1.497058] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.497059] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.548957] hid-generic 0003:413C:2110.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:15.0-2.1.4/input1 [ 1.642130] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060 [ 1.642131] [drm:wait_panel_status] Wait complete [ 1.642132] [drm:wait_panel_on] Wait for panel power on [ 1.642133] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000063 [ 1.654133] [drm] RC6 off [ 1.667814] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 1.667815] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1.667815] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 1.667834] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1.692776] [drm:wait_panel_status] Wait complete [ 1.692779] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.692780] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 1.693510] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.693510] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.693747] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.694280] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.694322] [drm:skylake_pfit_enable] for crtc_state = ffff880270598000 [ 1.694369] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.694370] [drm:intel_enable_pipe] enabling pipe A [ 1.694376] [drm:intel_edp_backlight_on] [ 1.694377] [drm:intel_panel_enable_backlight] pipe A [ 1.694377] [drm:intel_panel_actually_set_backlight] set backlight PWM = 67764 [ 1.698583] [drm:intel_psr_enable] PSR not supported on this platform [ 1.698584] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1.702385] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 1.702388] [drm:verify_crtc_state] [CRTC:26] [ 1.702399] [drm:verify_single_dpll_state] PORT PLL A [ 1.702420] [drm:drm_fb_helper_hotplug_event] [ 1.702421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.702421] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.702505] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.702590] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.702685] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.702686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.702688] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.702688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.702688] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.702689] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] disconnected [ 1.702690] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.702690] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.818546] [drm:intel_hdmi_detect] HDMI live status down [ 1.818548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.818548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.818549] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.818550] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] disconnected [ 1.818550] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.818550] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.930439] [drm:intel_hdmi_detect] HDMI live status down [ 1.930440] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.930442] [drm:drm_setup_crtcs] [ 1.930443] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.930443] [drm:drm_enable_connectors] connector 47 enabled? no [ 1.930443] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.930444] [drm:drm_enable_connectors] connector 54 enabled? no [ 1.930444] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.930445] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.930445] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.930446] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080 [ 1.930447] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.930447] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.930447] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.930448] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.930448] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.930459] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1.930498] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1.930517] Console: switching to colour frame buffer device 240x67 [ 1.930528] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 1.934342] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.016331] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.054129] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 2.305814] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 2.305817] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 2.467986] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 2.469127] systemd[1]: Detected architecture x86-64. [ 2.475341] systemd[1]: Set hostname to . [ 2.510094] systemd[1]: Reached target Encrypted Volumes. [ 2.512532] systemd[1]: Reached target Remote File Systems (Pre). [ 2.515000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.517433] systemd[1]: Created slice Root Slice. [ 2.519844] systemd[1]: Listening on Journal Socket. [ 2.522316] systemd[1]: Created slice User and Session Slice. [ 2.524461] systemd[1]: Listening on Journal Audit Socket. [ 2.526570] systemd[1]: Listening on udev Kernel Socket. [ 2.528648] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.530770] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.532878] systemd[1]: Listening on udev Control Socket. [ 2.535003] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.537149] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.539344] systemd[1]: Created slice System Slice. [ 2.551479] systemd[1]: Starting udev Coldplug all Devices... [ 2.554483] systemd[1]: Mounting Huge Pages File System... [ 2.557479] systemd[1]: Started Braille Device Support. [ 2.560570] systemd[1]: Mounting Debug File System... [ 2.563128] systemd[1]: Mounting POSIX Message Queue File System... [ 2.565933] systemd[1]: Started Read required files in advance. [ 2.568722] systemd[1]: Reached target Slices. [ 2.572035] systemd[1]: Starting Uncomplicated firewall... [ 2.574579] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.577527] systemd[1]: Starting Load Kernel Modules... [ 2.580426] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.583289] systemd[1]: Starting Setup Virtual Console... [ 2.584721] lp: driver loaded but no devices found [ 2.586361] ppdev: user-space parallel port driver [ 2.587995] systemd[1]: Created slice system-getty.slice. [ 2.590707] systemd[1]: Starting Increase datagram queue length... [ 2.593469] systemd[1]: Mounted Debug File System. [ 2.595422] systemd[1]: Mounted POSIX Message Queue File System. [ 2.597299] systemd[1]: Mounted Huge Pages File System. [ 2.599993] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED [ 2.601187] systemd[1]: ureadahead.service: Unit entered failed state. [ 2.602114] systemd[1]: ureadahead.service: Failed with result 'exit-code'. [ 2.603156] systemd[1]: Started Uncomplicated firewall. [ 2.605277] systemd[1]: Started Load Kernel Modules. [ 2.607578] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.609921] systemd[1]: Started Setup Virtual Console. [ 2.612238] systemd[1]: Started Increase datagram queue length. [ 2.624272] systemd[1]: Listening on Syslog Socket. [ 2.632214] systemd[1]: Starting Journal Service... [ 2.634598] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.637352] systemd[1]: Starting Apply Kernel Variables... [ 2.640026] systemd[1]: Mounting FUSE Control File System... [ 2.642876] systemd[1]: Mounted FUSE Control File System. [ 2.644333] systemd[1]: Started udev Coldplug all Devices. [ 2.645737] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.647107] systemd[1]: Started Apply Kernel Variables. [ 2.663336] systemd[1]: Starting udev Kernel Device Manager... [ 2.667573] systemd[1]: Started Journal Service. [ 2.701176] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 2.712801] systemd-journald[270]: Received request to flush runtime journal from PID 1 [ 2.719093] pmc-ipc-plat INT34D2:00: io res: [io 0x0400-0x047f] [ 2.719096] pmc-ipc-plat INT34D2:00: punit BIOS data res: [mem 0xfed17080-0xfed17083] [ 2.719097] pmc-ipc-plat INT34D2:00: punit BIOS interface res: [mem 0xfed17084-0xfed17087] [ 2.719105] pmc-ipc-plat INT34D2:00: ipc res: [mem 0xfe042000-0xfe043fff] [ 2.719106] pmc-ipc-plat INT34D2:00: telemetry ssram res: [mem 0xd1004000-0xd1005fff] [ 2.735902] rfkill_gpio BCM4752:00: invalid platform data [ 2.743600] rfkill_gpio: probe of BCM4752:00 failed with error -22 [ 2.751157] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.754652] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=4800/96000 [ 2.754655] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4800 [ 2.763513] Bluetooth: Core ver 2.21 [ 2.763522] NET: Registered protocol family 31 [ 2.763523] Bluetooth: HCI device and connection manager initialized [ 2.763525] Bluetooth: HCI socket layer initialized [ 2.763527] Bluetooth: L2CAP socket layer initialized [ 2.763529] Bluetooth: SCO socket layer initialized [ 2.766299] Intel(R) Wireless WiFi driver for Linux [ 2.766301] Copyright(c) 2003- 2015 Intel Corporation [ 2.768421] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2 [ 2.768432] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2 [ 2.768696] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2 [ 2.768709] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2 [ 2.768716] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2 [ 2.769082] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-16.ucode failed with error -2 [ 2.769097] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2 [ 2.769103] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-14.ucode failed with error -2 [ 2.769789] usbcore: registered new interface driver btusb [ 2.770331] iwlwifi 0000:02:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm [ 2.775150] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 2.775481] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 2.786259] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 2.786928] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2.787091] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2.812045] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.829459] Adding 3994620k swap on /dev/sda3. Priority:-1 extents:1 across:3994620k SSFS [ 2.830379] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 2.831202] random: nonblocking pool is initialized [ 2.852264] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.856833] ifquery[429]: segfault at 0 ip 00007f9140aa62c0 sp 00007ffca413b138 error 4 in libc-2.21.so[7f9140961000+1c0000] [ 2.872908] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.872909] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.872909] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 2.872910] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.872910] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.872911] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 2.888028] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10 [ 2.888647] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11 [ 2.888854] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12 [ 2.888897] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13 [ 2.889212] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14 [ 2.911272] SSE version of gcm_enc/dec engaged. [ 2.920522] audit: type=1400 audit(4039375109.363:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=503 comm="apparmor_parser" [ 2.920526] audit: type=1400 audit(4039375109.363:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=503 comm="apparmor_parser" [ 2.922194] audit: type=1400 audit(4039375109.375:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=503 comm="apparmor_parser" [ 2.922198] audit: type=1400 audit(4039375109.375:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=503 comm="apparmor_parser" [ 2.922200] audit: type=1400 audit(4039375109.375:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=503 comm="apparmor_parser" [ 2.922203] audit: type=1400 audit(4039375109.375:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=503 comm="apparmor_parser" [ 2.936916] audit: type=1400 audit(4039375109.431:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=503 comm="apparmor_parser" [ 2.936919] audit: type=1400 audit(4039375109.431:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=503 comm="apparmor_parser" [ 2.936920] audit: type=1400 audit(4039375109.431:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=503 comm="apparmor_parser" [ 2.965913] intel_rapl: Found RAPL domain package [ 2.965916] intel_rapl: Found RAPL domain core [ 2.965918] intel_rapl: Found RAPL domain uncore [ 2.965920] intel_rapl: Found RAPL domain dram [ 2.975162] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 3.009591] dw-apb-uart.8: ttyS4 at MMIO 0x9252d000 (irq = 4, base_baud = 115200) is a 16550A [ 3.053824] dw-apb-uart.9: ttyS5 at MMIO 0x9252e000 (irq = 5, base_baud = 115200) is a 16550A [ 3.104260] dw-apb-uart.10: ttyS6 at MMIO 0x9252f000 (irq = 6, base_baud = 115200) is a 16550A [ 3.107286] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.108078] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.108839] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.109586] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.110331] i2c_hid i2c-ELAN221D:00: hid_descr_cmd failed [ 3.129602] dw-apb-uart.11: ttyS7 at MMIO 0x92530000 (irq = 7, base_baud = 115200) is a 16550A [ 3.137049] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.137054] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 3.148784] i2c_hid i2c-ALPS0001:00: hid_descr_cmd failed [ 3.160798] xhci-hcd xhci-hcd.1.auto: Host not halted after 16000 microseconds. [ 3.160799] xhci-hcd xhci-hcd.1.auto: can't setup: -110 [ 3.161542] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 3.161555] xhci-hcd: probe of xhci-hcd.1.auto failed with error -110 [ 3.337514] asix 1-2.4:1.0 eth0: register 'asix' at usb-0000:00:15.0-2.4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:c2:b6 [ 3.337531] usbcore: registered new interface driver asix [ 3.339916] asix 1-2.4:1.0 enx00106031c2b6: renamed from eth0 [ 3.439928] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.439928] Bluetooth: BNEP filters: protocol multicast [ 3.439930] Bluetooth: BNEP socket layer initialized [ 3.459228] cgroup: new mount options do not match the existing superblock, will be ignored [ 3.545180] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.567794] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.569215] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 3.571387] asix 1-2.4:1.0 enx00106031c2b6: link down [ 3.571586] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 3.572834] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.572976] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.573129] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.588104] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.588260] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.595315] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.639834] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.780086] IPv6: ADDRCONF(NETDEV_CHANGE): enx00106031c2b6: link becomes ready [ 3.780225] asix 1-2.4:1.0 enx00106031c2b6: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 31.709959] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 105.628705] [drm:i915_error_state_write] Resetting error state [ 105.630648] [drm:i915_gem_open] [ 105.630719] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.630720] [drm:i915_pages_create_for_stolen] offset=0x7f9000, size=16384 [ 105.630756] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.630757] [drm:i915_pages_create_for_stolen] offset=0x7fd000, size=16384 [ 105.630768] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.630769] [drm:i915_pages_create_for_stolen] offset=0x801000, size=16384 [ 105.630777] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.630778] [drm:i915_pages_create_for_stolen] offset=0x805000, size=16384 [ 105.630953] [drm:i915_gem_open] [ 105.667494] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.667497] [drm:i915_pages_create_for_stolen] offset=0x809000, size=16384 [ 105.667528] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.667529] [drm:i915_pages_create_for_stolen] offset=0x80d000, size=16384 [ 105.667683] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.667683] [drm:i915_pages_create_for_stolen] offset=0x811000, size=16384 [ 105.667697] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.667698] [drm:i915_pages_create_for_stolen] offset=0x815000, size=16384 [ 105.667999] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 105.669495] [drm:i915_ring_test_irq_set] Masking interrupts on rings 0x0000000f [ 105.670633] [drm:i915_gem_open] [ 105.670708] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.670709] [drm:i915_pages_create_for_stolen] offset=0x7f9000, size=16384 [ 105.670739] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.670740] [drm:i915_pages_create_for_stolen] offset=0x7fd000, size=16384 [ 105.670751] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.670752] [drm:i915_pages_create_for_stolen] offset=0x801000, size=16384 [ 105.670763] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 105.670763] [drm:i915_pages_create_for_stolen] offset=0x805000, size=16384 [ 107.016079] [drm] Fake missed irq on render ring [ 107.016154] [drm:i915_gem_open] [ 108.519561] [drm] Fake missed irq on blitter ring [ 108.560181] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.560183] [drm:i915_pages_create_for_stolen] offset=0x809000, size=16384 [ 108.560213] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.560213] [drm:i915_pages_create_for_stolen] offset=0x80d000, size=16384 [ 108.560377] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.560378] [drm:i915_pages_create_for_stolen] offset=0x811000, size=16384 [ 108.560387] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.560388] [drm:i915_pages_create_for_stolen] offset=0x815000, size=16384 [ 108.561808] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 108.563304] [drm:i915_ring_test_irq_set] Masking interrupts on rings 0x00000000 [ 108.564364] [drm:i915_gem_open] [ 108.564438] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.564440] [drm:i915_pages_create_for_stolen] offset=0x7f9000, size=16384 [ 108.564475] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.564476] [drm:i915_pages_create_for_stolen] offset=0x7fd000, size=16384 [ 108.564494] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.564495] [drm:i915_pages_create_for_stolen] offset=0x801000, size=16384 [ 108.564505] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.564506] [drm:i915_pages_create_for_stolen] offset=0x805000, size=16384 [ 108.564757] [drm:i915_gem_open] [ 108.605805] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.605806] [drm:i915_pages_create_for_stolen] offset=0x809000, size=16384 [ 108.605834] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.605835] [drm:i915_pages_create_for_stolen] offset=0x80d000, size=16384 [ 108.606021] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.606021] [drm:i915_pages_create_for_stolen] offset=0x811000, size=16384 [ 108.606034] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.606035] [drm:i915_pages_create_for_stolen] offset=0x815000, size=16384 [ 108.606327] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0 [ 108.608355] [drm:i915_gem_open] [ 108.608447] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.608448] [drm:i915_pages_create_for_stolen] offset=0x7f9000, size=16384 [ 108.608475] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.608475] [drm:i915_pages_create_for_stolen] offset=0x7fd000, size=16384 [ 108.608484] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.608485] [drm:i915_pages_create_for_stolen] offset=0x801000, size=16384 [ 108.608492] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.608492] [drm:i915_pages_create_for_stolen] offset=0x805000, size=16384 [ 108.608738] [drm:i915_gem_open] [ 108.647303] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.647305] [drm:i915_pages_create_for_stolen] offset=0x809000, size=16384 [ 108.647333] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.647334] [drm:i915_pages_create_for_stolen] offset=0x80d000, size=16384 [ 108.647522] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.647523] [drm:i915_pages_create_for_stolen] offset=0x811000, size=16384 [ 108.647537] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 108.647537] [drm:i915_pages_create_for_stolen] offset=0x815000, size=16384 [ 108.647842] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0