[ 0.000000] Linux version 4.6.0-1-ARCH (builduser@tobias) (gcc version 6.1.1 20160501 (GCC) ) #1 SMP PREEMPT Mon May 16 20:36:53 CEST 2016 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=301bec73-2484-4e14-bba2-b852b02d482b rw quiet intel_iommu=on [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000076eb3fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000076eb4000-0x0000000076ed4fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000076ed5000-0x000000007a6d4fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a6d5000-0x000000007a764fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007a765000-0x000000007afe4fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007afe5000-0x000000007b0e4fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007b0e5000-0x000000007b124fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007b125000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by INSYDE Corp. [ 0.000000] efi: ACPI 2.0=0x7b124014 SMBIOS=0x7a775000 ESRT=0x7a778918 [ 0.000000] esrt: Reserving ESRT space from 0x000000007a778918 to 0x000000007a778950. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Foxconn Kangaroo Mobile Desktop/0E6A, BIOS 06 09/25/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable [ 0.000000] 3 base 07D000000 mask FFF000000 uncachable [ 0.000000] 4 base 07C800000 mask FFF800000 uncachable [ 0.000000] 5 base 07C400000 mask FFFC00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE [ 0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE [ 0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE [ 0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE [ 0.000000] BRK [0x01b53000, 0x01b53fff] PGTABLE [ 0.000000] BRK [0x01b54000, 0x01b54fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35ecb000-0x36f5cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007B124014 000024 (v02 FXN PC) [ 0.000000] ACPI: XSDT 0x000000007B0F1188 0000CC (v01 FXN PC FOXCONN 00000003 01000013) [ 0.000000] ACPI: FACP 0x000000007B11E000 00010C (v05 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000007B0FE000 019904 (v02 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000007B071000 000040 [ 0.000000] ACPI: UEFI 0x000000007B123000 000236 (v01 FXN PC FOXCONN 00000001 ACPI 00040000) [ 0.000000] ACPI: TCPA 0x000000007B122000 000032 (v02 FXN PC FOXCONN 00000000 ACPI 00040000) [ 0.000000] ACPI: MSDM 0x000000007B121000 000055 (v03 FXN PC FOXCONN 00000001 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x000000007B120000 000042 (v01 FXN PC FOXCONN 00000000 ACPI 00040000) [ 0.000000] ACPI: HPET 0x000000007B11D000 000038 (v01 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: LPIT 0x000000007B11C000 000104 (v01 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000007B11B000 00006C (v03 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000007B11A000 00003C (v01 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: PRAM 0x000000007B119000 000030 (v01 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007B118000 0006A9 (v01 FXN PC CpuDptf 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007B0FA000 003FD6 (v01 FXN PC DptfTab 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007B0F9000 000058 (v01 FXN PC LowPwrM 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007B0F8000 000763 (v01 FXN PC CpuPm 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007B0F7000 000290 (v01 FXN PC Cpu0Tst 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007B0F6000 00017A (v01 FXN PC ApTst 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000007B0F5000 000432 (v01 FXN PC Tpm2Tabl 00001000 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x000000007B0F4000 000034 (v03 FXN PC FOXCONN 00000000 ACPI 00040000) [ 0.000000] ACPI: CSRT 0x000000007B11F000 00014C (v00 FXN PC FOXCONN 00000003 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x000000007B0F3000 000044 (v01 FXN PC FOXCONN 00000002 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x000000007B0F2000 000038 (v01 FXN PC FOXCONN 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7a2e5000-0x7a2e8fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007bffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000076eb3fff] [ 0.000000] node 0: [mem 0x0000000076ed5000-0x000000007a6d4fff] [ 0.000000] node 0: [mem 0x000000007b125000-0x000000007bffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff] [ 0.000000] On node 0 totalpages: 500525 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7872 pages used for memmap [ 0.000000] DMA32 zone: 496527 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x7cc00000-0x7ebfffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x76eb4000-0x76ed4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a6d5000-0x7a764fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a765000-0x7afe4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7afe5000-0x7b0e4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b0e5000-0x7b124fff] [ 0.000000] e820: [mem 0x7ec00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88007a000000 s93464 r8192 d29416 u524288 [ 0.000000] pcpu-alloc: s93464 r8192 d29416 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 492566 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=301bec73-2484-4e14-bba2-b852b02d482b rw quiet intel_iommu=on [ 0.000000] DMAR: IOMMU enabled [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1883556K/2002100K available (5932K kernel code, 973K rwdata, 1792K rodata, 1224K init, 1152K bss, 118544K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:8448 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 1439.955 MHz processor [ 0.000054] Calibrating delay loop (skipped), value calculated using timer frequency.. 2881.90 BogoMIPS (lpj=4799850) [ 0.000061] pid_max: default: 32768 minimum: 301 [ 0.000084] ACPI: Core revision 20160108 [ 0.058496] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.059858] Security Framework initialized [ 0.059869] Yama: becoming mindful. [ 0.060219] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.061512] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.062113] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.062128] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.062641] CPU: Physical Processor ID: 0 [ 0.062648] CPU: Processor Core ID: 0 [ 0.062656] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.062659] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.062672] mce: CPU supports 6 MCE banks [ 0.062686] CPU0: Thermal monitoring enabled (TM1) [ 0.062694] process: using mwait in idle threads [ 0.062702] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.062705] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 [ 0.063225] Freeing SMP alternatives memory: 24K (ffffffff81a27000 - ffffffff81a2d000) [ 0.071436] ftrace: allocating 23476 entries in 92 pages [ 0.089743] smpboot: Max logical packages: 1 [ 0.089752] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.091999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.125017] TSC deadline timer enabled [ 0.125027] smpboot: CPU0: Intel(R) Atom(TM) x5-Z8500 CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x3) [ 0.125054] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.125075] ... version: 3 [ 0.125078] ... bit width: 40 [ 0.125081] ... generic registers: 2 [ 0.125084] ... value mask: 000000ffffffffff [ 0.125087] ... max period: 000000ffffffffff [ 0.125090] ... fixed-purpose events: 3 [ 0.125093] ... event mask: 0000000700000003 [ 0.145352] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.161842] x86: Booting SMP configuration: [ 0.161848] .... node #0, CPUs: #1 #2 #3 [ 0.441016] x86: Booted up 1 node, 4 CPUs [ 0.441024] smpboot: Total of 4 processors activated (11531.15 BogoMIPS) [ 0.442512] devtmpfs: initialized [ 0.442689] x86/mm: Memory block size: 128MB [ 0.452017] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.452023] PM: Registering ACPI NVS region [mem 0x7afe5000-0x7b0e4fff] (1048576 bytes) [ 0.452273] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.452443] pinctrl core: initialized pinctrl subsystem [ 0.452563] RTC time: 21:59:19, date: 05/17/16 [ 0.452928] NET: Registered protocol family 16 [ 0.462163] cpuidle: using governor ladder [ 0.472176] cpuidle: using governor menu [ 0.472266] ACPI: bus type PCI registered [ 0.472272] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.472452] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.472459] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.472474] PCI: Using configuration type 1 for base access [ 0.482639] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.483335] ACPI: Added _OSI(Module Device) [ 0.483341] ACPI: Added _OSI(Processor Device) [ 0.483345] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.483348] ACPI: Added _OSI(Processor Aggregator Device) [ 0.512153] ACPI: Dynamic OEM Table Load: [ 0.512178] ACPI: SSDT 0xFFFF880074261800 000620 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.514611] ACPI: Dynamic OEM Table Load: [ 0.514628] ACPI: SSDT 0xFFFF8800743F5C00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.517525] ACPI: Dynamic OEM Table Load: [ 0.517542] ACPI: SSDT 0xFFFF8800743ED800 00015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.519880] ACPI: Dynamic OEM Table Load: [ 0.519895] ACPI: SSDT 0xFFFF88007B84F0C0 00008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.524459] ACPI: Interpreter enabled [ 0.524516] ACPI: (supports S0 S4 S5) [ 0.524522] ACPI: Using IOAPIC for interrupt routing [ 0.524614] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.526578] ACPI: Power Resource [USBC] (on) [ 0.528014] ACPI: Power Resource [WWPR] (off) [ 0.528901] ACPI: Power Resource [WWPR] (off) [ 0.529698] ACPI: Power Resource [WWPR] (off) [ 0.530730] ACPI: Power Resource [WWPR] (off) [ 0.535488] ACPI: Power Resource [P33X] (off) [ 0.544914] ACPI: Power Resource [CLK3] (on) [ 0.545041] ACPI: Power Resource [CLK4] (off) [ 0.559101] ACPI: Power Resource [CLK2] (on) [ 0.559925] ACPI: Power Resource [CLK1] (on) [ 0.562141] ACPI: Power Resource [CLK0] (on) [ 0.562267] ACPI: Power Resource [CLK1] (on) [ 0.562476] ACPI Error: No handler for Region [DVEC] (ffff8800748c6048) [GenericSerialBus] (20160108/evregion-166) [ 0.562487] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20160108/exfldio-299) [ 0.562496] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.BATC._STA] (Node ffff8800748c7c80), AE_NOT_EXIST (20160108/psparse-542) [ 0.562575] ACPI Error: No handler for Region [DVEC] (ffff8800748c6048) [GenericSerialBus] (20160108/evregion-166) [ 0.562584] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20160108/exfldio-299) [ 0.562592] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.BATC._STA] (Node ffff8800748c7c80), AE_NOT_EXIST (20160108/psparse-542) [ 0.562607] ACPI Error: Method execution failed [\_SB.PCI0.I2C4.BATC._STA] (Node ffff8800748c7c80), AE_NOT_EXIST (20160108/uteval-103) [ 0.579227] ACPI: Power Resource [P28X] (off) [ 0.579349] ACPI: Power Resource [P18X] (off) [ 0.579467] ACPI: Power Resource [P12X] (off) [ 0.579585] ACPI: Power Resource [P28P] (off) [ 0.579697] ACPI: Power Resource [P18P] (off) [ 0.579815] ACPI: Power Resource [P19X] (off) [ 0.579926] ACPI: Power Resource [P06X] (off) [ 0.580044] ACPI: Power Resource [P28T] (off) [ 0.580160] ACPI: Power Resource [P18D] (off) [ 0.580280] ACPI: Power Resource [P18T] (off) [ 0.580396] ACPI: Power Resource [P3P3] (off) [ 0.580509] ACPI: Power Resource [P12T] (off) [ 0.580627] ACPI: Power Resource [P28W] (off) [ 0.580740] ACPI: Power Resource [P18W] (off) [ 0.580857] ACPI: Power Resource [P12W] (off) [ 0.580975] ACPI: Power Resource [P33W] (off) [ 0.589711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.589728] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.590282] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.590317] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.591267] PCI host bridge to bus 0000:00 [ 0.591276] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.591281] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.591286] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.591291] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.591296] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.591301] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.591306] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.591311] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window] [ 0.591316] pci_bus 0000:00: root bus resource [mem 0x7cc00001-0x7ec00000 window] [ 0.591321] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.591327] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.591345] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.591648] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000 [ 0.591681] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.591699] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.591712] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f] [ 0.591991] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000 [ 0.592027] pci 0000:00:0b.0: reg 0x10: [mem 0x91518000-0x91518fff 64bit] [ 0.592348] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.592384] pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit] [ 0.592499] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.592777] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.592806] pci 0000:00:1a.0: reg 0x10: [mem 0x91400000-0x914fffff] [ 0.592823] pci 0000:00:1a.0: reg 0x14: [mem 0x91300000-0x913fffff] [ 0.592931] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.593374] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.594896] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.595354] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.596399] pci 0000:01:00.0: [8086:095a] type 00 class 0x028000 [ 0.596602] pci 0000:01:00.0: reg 0x10: [mem 0x91200000-0x91201fff 64bit] [ 0.597468] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.604625] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.604716] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff] [ 0.609426] ACPI Error: No handler for Region [DVEC] (ffff8800748c6048) [GenericSerialBus] (20160108/evregion-166) [ 0.609439] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20160108/exfldio-299) [ 0.609448] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.BATC._STA] (Node ffff8800748c7c80), AE_NOT_EXIST (20160108/psparse-542) [ 0.611900] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.612079] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.612263] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.612435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.612612] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.612781] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.612952] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.613123] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.618007] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.618014] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.618020] vgaarb: loaded [ 0.618024] vgaarb: bridge control possible 0000:00:02.0 [ 0.618482] PCI: Using ACPI for IRQ routing [ 0.621211] PCI: pci_cache_line_size set to 64 bytes [ 0.621365] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.621372] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.621378] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.621381] e820: reserve RAM buffer [mem 0x76eb4000-0x77ffffff] [ 0.621385] e820: reserve RAM buffer [mem 0x7a6d5000-0x7bffffff] [ 0.621728] NetLabel: Initializing [ 0.621733] NetLabel: domain hash size = 128 [ 0.621736] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.621768] NetLabel: unlabeled traffic allowed by default [ 0.621928] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.621939] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.624010] clocksource: Switched to clocksource hpet [ 0.638292] VFS: Disk quotas dquot_6.6.0 [ 0.638337] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.638625] pnp: PnP ACPI init [ 0.638832] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.638839] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.638845] system 00:00: [io 0x0500-0x05fe] has been reserved [ 0.638856] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.639086] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.641109] ACPI Error: No handler for Region [DVEC] (ffff8800748c6048) [GenericSerialBus] (20160108/evregion-166) [ 0.641121] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20160108/exfldio-299) [ 0.641131] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.BATC._STA] (Node ffff8800748c7c80), AE_NOT_EXIST (20160108/psparse-542) [ 0.641148] ACPI Error: Method execution failed [\_SB.PCI0.I2C4.BATC._STA] (Node ffff8800748c7c80), AE_NOT_EXIST (20160108/uteval-103) [ 0.643397] system 00:02: [mem 0x91524000-0x91524fff] has been reserved [ 0.643405] system 00:02: [mem 0x91522000-0x91522fff] has been reserved [ 0.643411] system 00:02: [mem 0x9151b000-0x9151bfff] has been reserved [ 0.643417] system 00:02: [mem 0x91519000-0x91519fff] has been reserved [ 0.643422] system 00:02: [mem 0x91520000-0x91520fff] has been reserved [ 0.643428] system 00:02: [mem 0x9151e000-0x9151efff] has been reserved [ 0.643433] system 00:02: [mem 0x9151c000-0x9151cfff] has been reserved [ 0.643442] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.643811] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.643819] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.643825] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.643831] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.643836] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.643842] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.643848] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved [ 0.643853] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.643859] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.643868] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.644282] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.645804] pnp: PnP ACPI: found 5 devices [ 0.656866] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.657027] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.657100] pci 0000:00:1c.0: bridge window [mem 0x91200000-0x912fffff] [ 0.657233] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.657238] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.657243] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.657248] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.657253] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.657258] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.657263] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.657268] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window] [ 0.657273] pci_bus 0000:00: resource 12 [mem 0x7cc00001-0x7ec00000 window] [ 0.657278] pci_bus 0000:00: resource 13 [mem 0x80000000-0xdfffffff window] [ 0.657283] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff] [ 0.657375] NET: Registered protocol family 2 [ 0.657820] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.657927] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.658036] TCP: Hash tables configured (established 16384 bind 16384) [ 0.658108] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.658137] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.658264] NET: Registered protocol family 1 [ 0.658314] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.660814] PCI: CLS 64 bytes, default 64 [ 0.660950] Unpacking initramfs... [ 1.211040] Freeing initrd memory: 16968K (ffff880035ecb000 - ffff880036f5d000) [ 1.211377] Scanning for low memory corruption every 60 seconds [ 1.212304] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.213176] Initialise system trusted keyring [ 1.213489] workingset: timestamp_bits=38 max_order=19 bucket_order=0 [ 1.218039] zbud: loaded [ 1.218659] Key type big_key registered [ 1.219525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.219630] io scheduler noop registered [ 1.219638] io scheduler deadline registered [ 1.219724] io scheduler cfq registered (default) [ 1.221638] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.221646] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.221694] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.221714] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.221734] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.221786] efifb: probing for efifb [ 1.221824] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, using 8128k, total 8128k [ 1.221829] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.221831] efifb: scrolling: redraw [ 1.221836] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.239805] Console: switching to colour frame buffer device 240x67 [ 1.257377] fb0: EFI VGA frame buffer device [ 1.257405] intel_idle: MWAIT substates: 0x33000020 [ 1.257409] intel_idle: v0.4.1 model 0x4C [ 1.257806] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.257922] GHES: HEST is not enabled! [ 1.258099] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.278615] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.279926] Linux agpgart interface v0.103 [ 1.281280] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.281338] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.281365] Intel P-state driver initializing. [ 1.341207] ledtrig-cpu: registered to indicate activity on CPUs [ 1.346426] NET: Registered protocol family 10 [ 1.347993] NET: Registered protocol family 17 [ 1.349845] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x34f [ 1.349963] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x34f [ 1.350082] microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x34f [ 1.350121] microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x34f [ 1.350635] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.352866] registered taskstats version 1 [ 1.352959] Loading compiled-in X.509 certificates [ 1.353085] zswap: loaded using pool lzo/zbud [ 1.355628] Magic number: 0:941:1005 [ 1.356494] rtc_cmos 00:04: setting system clock to 2016-05-17 21:59:20 UTC (1463522360) [ 1.357336] PM: Hibernation image not present or could not be loaded. [ 1.366445] Freeing unused kernel memory: 1224K (ffffffff818f5000 - ffffffff81a27000) [ 1.366462] Write protecting the kernel read-only data: 8192k [ 1.368695] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000) [ 1.373706] Freeing unused kernel memory: 256K (ffff8800017c0000 - ffff880001800000) [ 1.431077] random: systemd-tmpfile urandom read with 2 bits of entropy available [ 1.464455] Bluetooth: Core ver 2.21 [ 1.464509] NET: Registered protocol family 31 [ 1.464515] Bluetooth: HCI device and connection manager initialized [ 1.464527] Bluetooth: HCI socket layer initialized [ 1.464537] Bluetooth: L2CAP socket layer initialized [ 1.464556] Bluetooth: SCO socket layer initialized [ 1.466458] hidraw: raw HID events driver (C) Jiri Kosina [ 1.467635] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.467653] Bluetooth: HIDP socket layer initialized [ 1.473507] FS-Cache: Loaded [ 1.474225] Key type dns_resolver registered [ 1.479558] FS-Cache: Netfs 'cifs' registered for caching [ 1.479815] Key type cifs.spnego registered [ 1.479840] Key type cifs.idmap registered [ 1.490654] Bluetooth: RFCOMM TTY layer initialized [ 1.490721] Bluetooth: RFCOMM socket layer initialized [ 1.490737] Bluetooth: RFCOMM ver 1.11 [ 1.491652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.491658] Bluetooth: BNEP filters: protocol multicast [ 1.491666] Bluetooth: BNEP socket layer initialized [ 1.496004] ACPI: bus type USB registered [ 1.496069] usbcore: registered new interface driver usbfs [ 1.496101] usbcore: registered new interface driver hub [ 1.496169] usbcore: registered new device driver usb [ 1.506148] usbcore: registered new interface driver snd-usb-audio [ 1.508772] mousedev: PS/2 mouse device common for all mice [ 1.511823] intel_rapl: Found RAPL domain package [ 1.511835] intel_rapl: Found RAPL domain core [ 1.523701] iTCO_vendor_support: vendor-support=0 [ 1.524095] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 1.526507] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 1.533477] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460) [ 1.533711] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.534491] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.535461] wmi: Mapper loaded [ 1.536972] nfc: nfc_init: NFC Core ver 0.1 [ 1.537008] NET: Registered protocol family 39 [ 1.541599] Bluetooth: HCI UART driver ver 2.3 [ 1.541606] Bluetooth: HCI UART protocol H4 registered [ 1.541608] Bluetooth: HCI UART protocol BCSP registered [ 1.541610] Bluetooth: HCI UART protocol LL registered [ 1.541612] Bluetooth: HCI UART protocol ATH3K registered [ 1.541614] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 1.541687] Bluetooth: HCI UART protocol Intel registered [ 1.541717] Bluetooth: HCI UART protocol BCM registered [ 1.541719] Bluetooth: HCI UART protocol QCA registered [ 1.541721] Bluetooth: HCI UART protocol AG6XX registered [ 1.542348] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.548617] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.550212] usbcore: registered new interface driver usbserial [ 1.550233] usbcore: registered new interface driver usbserial_generic [ 1.550252] usbserial: USB Serial support registered for generic [ 1.550932] usbcore: registered new interface driver pl2303 [ 1.550961] usbserial: USB Serial support registered for pl2303 [ 1.554816] sdhci: Secure Digital Host Controller Interface driver [ 1.554822] sdhci: Copyright(c) Pierre Ossman [ 1.573417] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 1.584998] sdhci-acpi 80860F14:01: failed to setup card detect gpio [ 1.590144] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA [ 1.597305] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.597331] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.598575] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00509810 [ 1.598593] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.599296] hub 1-0:1.0: USB hub found [ 1.599334] hub 1-0:1.0: 7 ports detected [ 1.601409] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.601421] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.602093] hub 2-0:1.0: USB hub found [ 1.602121] hub 2-0:1.0: 6 ports detected [ 1.692541] ACPI Error: No handler for Region [DVEC] (ffff8800748c6048) [GenericSerialBus] (20160108/evregion-166) [ 1.692566] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20160108/exfldio-299) [ 1.692583] ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C4.BATC._STA] (Node ffff8800748c7c80), AE_NOT_EXIST (20160108/psparse-542) [ 1.693500] mmc0: new HS200 MMC card at address 0001 [ 1.694426] mmcblk0: mmc0:0001 MBG4GC 29.1 GiB [ 1.694634] mmcblk0boot0: mmc0:0001 MBG4GC partition 1 4.00 MiB [ 1.694829] mmcblk0boot1: mmc0:0001 MBG4GC partition 2 4.00 MiB [ 1.695022] mmcblk0rpmb: mmc0:0001 MBG4GC partition 3 4.00 MiB [ 1.699378] mmcblk0: p1 p2 [ 1.757745] mmc1: error -110 whilst initialising SD card [ 1.783787] [drm] Initialized drm 1.1.0 20060810 [ 1.792809] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.793039] ACPI: Power Button [PWRB] [ 1.793176] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.793428] ACPI: Power Button [PWRF] [ 1.805967] [drm] Memory usable by graphics device = 2048M [ 1.805975] checking generic (80000000 7f0000) vs hw (80000000 10000000) [ 1.805978] fb: switching to inteldrmfb from EFI VGA [ 1.806026] Console: switching to colour dummy device 80x25 [ 1.806181] [drm] Replacing VGA console driver [ 1.806427] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.806430] [drm] Driver supports precise vblank timestamp query. [ 1.890792] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.924369] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd [ 1.941787] hub 2-3:1.0: USB hub found [ 1.941914] hub 2-3:1.0: 4 ports detected [ 1.953742] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.955176] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.955578] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0 [ 2.001594] fbcon: inteldrmfb (fb0) is primary device [ 2.214037] tsc: Refined TSC clocksource calibration: 1439.953 MHz [ 2.214040] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c18e756e4, max_idle_ns: 440795259570 ns [ 2.377816] Console: switching to colour frame buffer device 240x67 [ 2.410754] usb 2-3.3: new SuperSpeed USB device number 3 using xhci_hcd [ 2.445399] SCSI subsystem initialized [ 2.449235] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.482469] thermal LNXTHERM:00: registered as thermal_zone7 [ 2.482475] ACPI: Thermal Zone [TZ00] (0 C) [ 2.485723] thermal LNXTHERM:01: registered as thermal_zone8 [ 2.485727] ACPI: Thermal Zone [TZ01] (0 C) [ 2.488173] usbcore: registered new interface driver usbhid [ 2.488179] usbhid: USB HID core driver [ 2.490630] usbcore: registered new interface driver btusb [ 2.493943] usbcore: registered new interface driver ax88179_178a [ 2.499205] SSE version of gcm_enc/dec engaged. [ 2.532952] usb-storage 2-3.3:1.0: USB Mass Storage device detected [ 2.533504] usb-storage 2-3.3:1.0: Quirks match for vid 152d pid 0539: 4000000 [ 2.533615] scsi host0: usb-storage 2-3.3:1.0 [ 2.536435] usbcore: registered new interface driver usb-storage [ 2.537998] usbcore: registered new interface driver uas [ 2.561854] Intel(R) Wireless WiFi driver for Linux [ 2.561860] Copyright(c) 2003- 2015 Intel Corporation [ 2.562665] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2 [ 2.562692] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2 [ 2.562716] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2 [ 2.564839] iwlwifi 0000:01:00.0: loaded firmware version 18.261294.0 op_mode iwlmvm [ 2.569586] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 2.569807] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 2.570204] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 2.597958] usb 2-3.4: new SuperSpeed USB device number 4 using xhci_hcd [ 2.644625] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.666133] md: raid0 personality registered for level 0 [ 2.693883] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.945447] ax88179_178a 2-3.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-3.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:16:b3:40 [ 2.954038] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 3.146088] Bluetooth: hci0: read Intel version: 370810011003110e23 [ 3.146107] Bluetooth: hci0: Intel device is already patched. patch num: 23 [ 3.287354] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 3.463097] hub 1-3:1.0: USB hub found [ 3.463338] hub 1-3:1.0: 4 ports detected [ 3.539397] scsi 0:0:0:0: Direct-Access ST310003 33AS 0X0@ PQ: 0 ANSI: 6 [ 3.540162] scsi 0:0:0:1: Direct-Access ST310005 28AS 0X0@ PQ: 0 ANSI: 6 [ 3.540627] scsi 0:0:0:2: Direct-Access ST320005 42AS 0X0@ PQ: 0 ANSI: 6 [ 3.541058] scsi 0:0:0:3: Direct-Access ST320005 42AS 0X0@ PQ: 0 ANSI: 6 [ 3.542586] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.543143] sd 0:0:0:0: [sda] Write Protect is off [ 3.543169] sd 0:0:0:0: [sda] Mode Sense: 3b 00 10 08 [ 3.543235] sd 0:0:0:1: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.543597] sd 0:0:0:0: [sda] No Caching mode page found [ 3.543786] sd 0:0:0:1: [sdb] Write Protect is off [ 3.543790] sd 0:0:0:1: [sdb] Mode Sense: 3b 00 10 08 [ 3.543865] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.543929] sd 0:0:0:2: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.544172] sd 0:0:0:1: [sdb] No Caching mode page found [ 3.544174] sd 0:0:0:1: [sdb] Assuming drive cache: write through [ 3.544561] sd 0:0:0:2: [sdc] Write Protect is off [ 3.544572] sd 0:0:0:2: [sdc] Mode Sense: 3b 00 10 08 [ 3.544878] sd 0:0:0:2: [sdc] No Caching mode page found [ 3.544952] sd 0:0:0:2: [sdc] Assuming drive cache: write through [ 3.548390] sd 0:0:0:3: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.549512] sd 0:0:0:3: [sdd] Write Protect is off [ 3.549531] sd 0:0:0:3: [sdd] Mode Sense: 3b 00 10 08 [ 3.550767] sd 0:0:0:3: [sdd] No Caching mode page found [ 3.550963] sd 0:0:0:3: [sdd] Assuming drive cache: write through [ 3.615004] sdb: sdb1 [ 3.630712] usb 1-4: new full-speed USB device number 4 using xhci_hcd [ 3.632127] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 [ 3.643554] sd 0:0:0:1: [sdb] Attached SCSI disk [ 3.645866] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 3.648053] sd 0:0:0:2: [sdc] Attached SCSI disk [ 3.654649] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 [ 3.654828] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.660492] sd 0:0:0:3: [sdd] Attached SCSI disk [ 3.774708] random: nonblocking pool is initialized [ 3.805530] pl2303 1-4:1.0: pl2303 converter detected [ 3.808178] usb 1-4: pl2303 converter now attached to ttyUSB0 [ 3.860189] clocksource: Switched to clocksource tsc [ 4.618034] md: md5 stopped. [ 4.619695] md: bind [ 4.620005] md: bind [ 4.622532] md/raid0:md5: md_size is 33550336 sectors. [ 4.622538] md: RAID0 configuration for md5 - 1 zone [ 4.622540] md: zone0=[sdc2/sdd2] [ 4.622546] zone-offset= 0KB, device-offset= 0KB, size= 16775168KB [ 4.622577] md5: detected capacity change from 0 to 17177772032 [ 5.007716] usb 1-3.1: new high-speed USB device number 5 using xhci_hcd [ 5.106640] hub 1-3.1:1.0: USB hub found [ 5.106999] hub 1-3.1:1.0: 4 ports detected [ 5.377724] usb 1-3.1.4: new high-speed USB device number 6 using xhci_hcd [ 5.463984] hub 1-3.1.4:1.0: USB hub found [ 5.464458] hub 1-3.1.4:1.0: 4 ports detected [ 5.737920] usb 1-3.1.4.4: new full-speed USB device number 7 using xhci_hcd [ 5.840014] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.1.4.4/input2 [ 5.954585] input: Logitech K360 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4.4/1-3.1.4.4:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input4 [ 5.956427] logitech-hidpp-device 0003:046D:4004.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:14.0-3.1.4.4:1 [ 5.962241] input: Logitech Performance MX as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1.4/1-3.1.4.4/1-3.1.4.4:1.2/0003:046D:C52B.0003/0003:046D:101A.0005/input/input5 [ 5.962940] logitech-hidpp-device 0003:046D:101A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:14.0-3.1.4.4:2 [ 9.309527] md: md2 stopped. [ 9.311908] md: bind [ 9.312418] md: bind [ 9.319609] md/raid0:md2: md_size is 503312384 sectors. [ 9.319617] md: RAID0 configuration for md2 - 1 zone [ 9.319619] md: zone0=[sdc3/sdd3] [ 9.319626] zone-offset= 0KB, device-offset= 0KB, size= 251656192KB [ 9.319727] md2: detected capacity change from 0 to 257695940608 [ 14.041618] md: md3 stopped. [ 14.044144] md: bind [ 14.044549] md: bind [ 14.051398] md/raid0:md3: md_size is 3145723904 sectors. [ 14.051405] md: RAID0 configuration for md3 - 1 zone [ 14.051408] md: zone0=[sdc4/sdd4] [ 14.051414] zone-offset= 0KB, device-offset= 0KB, size=1572861952KB [ 14.051447] md3: detected capacity change from 0 to 1610610638848 [ 18.746383] md: md4 stopped. [ 18.748844] md: bind [ 18.749226] md: bind [ 18.756201] md/raid0:md4: md_size is 3842043904 sectors. [ 18.756210] md: RAID0 configuration for md4 - 1 zone [ 18.756214] md: zone0=[sdc5/sdd5] [ 18.756223] zone-offset= 0KB, device-offset= 0KB, size=1921021952KB [ 18.756269] md4: detected capacity change from 0 to 1967126478848 [ 23.474505] md: md1 stopped. [ 23.479674] md: bind [ 23.480692] md: bind [ 23.487537] md/raid0:md1: md_size is 281014272 sectors. [ 23.487557] md: RAID0 configuration for md1 - 1 zone [ 23.487569] md: zone0=[sdc6/sdd6] [ 23.487597] zone-offset= 0KB, device-offset= 0KB, size= 140507136KB [ 23.487695] md1: detected capacity change from 0 to 143879307264 [ 28.213773] XFS (mmcblk0p2): Mounting V5 Filesystem [ 28.331227] XFS (mmcblk0p2): Ending clean mount [ 28.561350] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 28.561720] systemd[1]: Detected architecture x86-64. [ 28.563438] systemd[1]: Set hostname to . [ 28.731556] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 28.731675] systemd[1]: Listening on udev Kernel Socket. [ 28.731698] systemd[1]: Reached target Encrypted Volumes. [ 28.731785] systemd[1]: Listening on Journal Socket. [ 28.732417] systemd[1]: Created slice User and Session Slice. [ 28.732442] systemd[1]: Reached target Swap. [ 28.732664] systemd[1]: Created slice System Slice. [ 28.744798] systemd[1]: Mounting Huge Pages File System... [ 28.746796] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 28.748462] systemd[1]: Mounting Temporary Directory... [ 28.748526] systemd[1]: Reached target Login Prompts. [ 28.748733] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 28.749229] systemd[1]: Created slice system-getty.slice. [ 28.749597] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 28.750988] systemd[1]: Mounting Debug File System... [ 28.752651] systemd[1]: Starting Remount Root and Kernel File Systems... [ 28.752821] systemd[1]: Listening on Journal Socket (/dev/log). [ 28.759261] systemd[1]: Starting Load Kernel Modules... [ 28.759969] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 28.764207] systemd[1]: Starting Set Up Additional Binary Formats... [ 28.766638] systemd[1]: Starting Setup Virtual Console... [ 28.766914] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 28.767014] systemd[1]: Reached target Slices. [ 28.767223] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 28.768982] systemd[1]: Listening on udev Control Socket. [ 28.770833] systemd[1]: Mounting POSIX Message Queue File System... [ 28.774222] systemd[1]: Listening on Process Core Dump Socket. [ 28.774351] systemd[1]: Listening on LVM2 metadata daemon socket. [ 28.784952] systemd[1]: Starting Journal Service... [ 28.788435] systemd[1]: Mounted Debug File System. [ 28.788519] systemd[1]: Mounted POSIX Message Queue File System. [ 28.788556] systemd[1]: Mounted Huge Pages File System. [ 28.788596] systemd[1]: Mounted Temporary Directory. [ 28.789196] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 28.789875] systemd[1]: Started Remount Root and Kernel File Systems. [ 28.790347] systemd[1]: Started Load Kernel Modules. [ 28.790748] systemd[1]: Started Setup Virtual Console. [ 28.793445] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 401 (systemd-binfmt) [ 28.828233] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 28.829726] systemd[1]: Starting Apply Kernel Variables... [ 28.831206] systemd[1]: Mounting Configuration File System... [ 28.832651] systemd[1]: Starting Load/Save Random Seed... [ 28.840355] systemd[1]: Starting udev Coldplug all Devices... [ 28.842041] systemd[1]: Starting Create Static Device Nodes in /dev... [ 28.845555] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 28.845637] systemd[1]: Mounted Configuration File System. [ 28.858336] systemd[1]: Started Set Up Additional Binary Formats. [ 28.862604] systemd[1]: Started Load/Save Random Seed. [ 28.868197] systemd[1]: Started Apply Kernel Variables. [ 28.984462] systemd[1]: Started Create Static Device Nodes in /dev. [ 28.998311] systemd[1]: Starting udev Kernel Device Manager... [ 28.998395] systemd[1]: Reached target Local File Systems (Pre). [ 29.028023] systemd[1]: Started udev Coldplug all Devices. [ 29.165314] systemd[1]: Started udev Kernel Device Manager. [ 29.233594] systemd[1]: Started Journal Service. [ 29.260139] systemd-journald[414]: Received request to flush runtime journal from PID 1 [ 29.431708] intel_sst_acpi 808622A8:00: LPE base: 0x91000000 size:0x200000 [ 29.431717] intel_sst_acpi 808622A8:00: IRAM base: 0x910c0000 [ 29.431767] intel_sst_acpi 808622A8:00: DRAM base: 0x91100000 [ 29.431775] intel_sst_acpi 808622A8:00: SHIM base: 0x91140000 [ 29.431781] intel_sst_acpi 808622A8:00: Mailbox base: 0x91144000 [ 29.431787] intel_sst_acpi 808622A8:00: DDR base: 0x20000000 [ 29.432459] intel_sst_acpi 808622A8:00: Got drv data max stream 25 [ 29.436652] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 29.567873] ax88179_178a 2-3.4:1.0 enp0s20u3u4: renamed from eth0 [ 29.644102] cht-bsw-rt5672 cht-bsw-rt5672: ASoC: CODEC DAI rt5670-aif1 not registered [ 29.644197] cht-bsw-rt5672 cht-bsw-rt5672: snd_soc_register_card failed -517 [ 30.069127] XFS (sda6): Mounting V4 Filesystem [ 30.474724] XFS (sda6): Ending clean mount [ 30.524790] XFS (md4): Mounting V4 Filesystem [ 30.672917] XFS (md3): Mounting V4 Filesystem [ 30.690315] XFS (md1): Mounting V4 Filesystem [ 30.703151] XFS (md2): Mounting V4 Filesystem [ 31.667921] XFS (md4): Ending clean mount [ 31.723785] XFS (md2): Ending clean mount [ 31.798752] XFS (md3): Ending clean mount [ 31.809651] XFS (md1): Ending clean mount [ 32.933961] IPv6: ADDRCONF(NETDEV_UP): enp0s20u3u4: link is not ready [ 33.269777] IPv6: ADDRCONF(NETDEV_UP): enp0s20u3u4: link is not ready [ 33.321177] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 35.748609] ax88179_178a 2-3.4:1.0 enp0s20u3u4: ax88179 - Link status is: 1 [ 35.757223] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u3u4: link becomes ready [ 44.610394] fuse init (API version 7.24) [ 51.133576] XFS (sdb1): Mounting V5 Filesystem [ 51.208854] XFS (sdb1): Ending clean mount [ 120.915754] hid-generic 0005:046D:B316.0006: unknown main item tag 0x0 [ 120.916347] input: Logitech K760 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/bluetooth/hci0/hci0:256/0005:046D:B316.0006/input/input6 [ 120.917561] hid-generic 0005:046D:B316.0006: input,hidraw3: BLUETOOTH HID v1.1b Keyboard [Logitech K760] on 94:65:9c:ea:61:58 [ 120.931225] cht-bsw-rt5672 cht-bsw-rt5672: ASoC: CODEC DAI rt5670-aif1 not registered [ 120.931241] cht-bsw-rt5672 cht-bsw-rt5672: snd_soc_register_card failed -517 [ 213.287802] [drm] stuck on render ring [ 213.297494] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [973], reason: Ring hung, action: reset [ 213.297511] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 213.297520] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 213.297529] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 213.297537] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 213.297547] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 213.300777] drm/i915: Resetting chip after gpu hang [ 219.300611] [drm] stuck on blitter ring [ 219.309977] [drm] GPU HANG: ecode 8:0:0xfffffffe, in Xorg [973], reason: Ring hung, action: reset [ 219.310532] ------------[ cut here ]------------ [ 219.310651] WARNING: CPU: 1 PID: 163 at drivers/gpu/drm/i915/intel_display.c:11384 intel_mmio_flip_work_func+0x442/0x4c0 [i915] [ 219.310657] WARN_ON(__i915_wait_request(mmio_flip->req, mmio_flip->crtc->reset_counter, false, ((void *)0), &mmio_flip->i915->rps.mmioflips)) [ 219.310660] Modules linked in: [ 219.310666] hid_generic fuse msr snd_soc_sst_cht_bsw_rt5672 ghash_clmulni_intel snd_intel_sst_acpi snd_intel_sst_core snd_soc_rt5640 snd_soc_rt5670 snd_soc_sst_mfld_platform snd_soc_rt5645 snd_soc_rl6231 snd_soc_sst_match snd_soc_core snd_compress snd_pcm_dmaengine processor acpi_call(O) cpufreq_conservative xfs crc32c_generic crc32c_intel libcrc32c raid0 md_mod sd_mod iwlmvm iwlwifi mac80211 cfg80211 hid_logitech_hidpp uas aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd hid_logitech_dj ax88179_178a usbnet mii btusb btrtl usbhid thermal processor_thermal_device intel_soc_dts_iosf int3403_thermal int340x_thermal_zone usb_storage scsi_mod i915 video button intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm tpm_crb ac97_bus i2c_hid rfkill_gpio [ 219.310793] i2c_designware_platform i2c_designware_core spi_pxa2xx_platform int3400_thermal acpi_thermal_rel ac pinctrl_cherryview sch_fq_codel ext4 jbd2 mbcache mmc_block xhci_pci xhci_hcd sdhci_acpi sdhci mmc_core pl2303 usbserial ip_tables x_tables tpm_tis tpm acpi_pad mac_hid 8250_dw battery fjes hci_uart btbcm btqca btintel fdp_i2c fdp nci nfc wmi shpchp lpc_ich evdev mei_txe mei pcspkr crc32_pclmul crct10dif_pclmul iTCO_wdt iTCO_vendor_support kvm_intel kvm irqbypass coretemp intel_powerclamp intel_rapl vfat fat nls_cp437 nls_iso8859_1 mousedev input_leds led_class joydev snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_seq_device snd_pcm snd_timer snd soundcore usbcore usb_common bnep rfcomm ccm ctr ansi_cprng drbg hmac sha256_ssse3 sha256_generic ecb cmac cifs dns_resolver fscache [ 219.310921] nls_utf8 md4 arc4 hidp hid bluetooth rfkill crc16 [ 219.310940] CPU: 1 PID: 163 Comm: kworker/1:3 Tainted: G O 4.6.0-1-ARCH #1 [ 219.310944] Hardware name: Foxconn Kangaroo Mobile Desktop/0E6A, BIOS 06 09/25/2015 [ 219.310986] Workqueue: events intel_mmio_flip_work_func [i915] [ 219.310992] 0000000000000286 00000000198c6b4f ffff880036b7fd18 ffffffff812e5362 [ 219.311000] ffff880036b7fd68 0000000000000000 ffff880036b7fd58 ffffffff8107a68b [ 219.311008] 00002c7836b7fd20 ffff8800369000c0 ffff880041b886c0 ffff88005d9e0b40 [ 219.311015] Call Trace: [ 219.311029] [] dump_stack+0x63/0x81 [ 219.311037] [] __warn+0xcb/0xf0 [ 219.311044] [] warn_slowpath_fmt+0x5f/0x80 [ 219.311052] [] ? __switch_to+0x397/0x430 [ 219.311093] [] intel_mmio_flip_work_func+0x442/0x4c0 [i915] [ 219.311102] [] process_one_work+0x1e5/0x480 [ 219.311108] [] worker_thread+0x48/0x4e0 [ 219.311114] [] ? process_one_work+0x480/0x480 [ 219.311120] [] ? process_one_work+0x480/0x480 [ 219.311127] [] kthread+0xd8/0xf0 [ 219.311136] [] ret_from_fork+0x22/0x40 [ 219.311143] [] ? kthread_worker_fn+0x170/0x170 [ 219.311148] ---[ end trace a24d6b3dfee84cba ]--- [ 219.312641] [drm:i915_set_reset_status [i915]] *ERROR* gpu hanging too fast, banning! [ 219.315023] drm/i915: Resetting chip after gpu hang