IGT-Version: 1.14-g303b380 (x86_64) (Linux: 4.6.0-drm-intel-nightly-ww23-commit-fb023a2+ x86_64)
Testing connector DP-1 using pipe A plane 1
Testing connector DP-3 using pipe A plane 1
Test requirement not met in function test_grab_crc, file kms_plane.c:86:
Test requirement: !(ret != 0)
Last errno: 28, No space left on device
Subtest plane-position-covered-pipe-A-plane-1: SKIP (2.168s)
Testing connector DP-1 using pipe A plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0xbc]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-pipe-A-plane-1: FAIL (0.005s)
Testing connector DP-1 using pipe A plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x140]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-dpms-pipe-A-plane-1: FAIL (0.003s)
Testing connector DP-1 using pipe A plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x1a2]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-top-left-pipe-A-plane-1: FAIL (0.003s)
Testing connector DP-1 using pipe A plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x274]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-pipe-A-plane-1: FAIL (0.003s)
Testing connector DP-1 using pipe A plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x2a0]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-suspend-pipe-A-plane-1: FAIL (0.003s)
Testing connector DP-1 using pipe A plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x8f]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-covered-pipe-A-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0xbc]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-pipe-A-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x140]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-dpms-pipe-A-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x1a2]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-top-left-pipe-A-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x274]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-pipe-A-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x2a0]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-suspend-pipe-A-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x8f]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-covered-pipe-A-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0xbc]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-pipe-A-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x140]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-dpms-pipe-A-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x1a2]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-top-left-pipe-A-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x274]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-pipe-A-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe A plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x2a0]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-suspend-pipe-A-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 1
Subtest plane-position-covered-pipe-B-plane-1: SUCCESS (2.652s)
Testing connector DP-1 using pipe B plane 1
Subtest plane-position-hole-pipe-B-plane-1: SUCCESS (2.183s)
Testing connector DP-1 using pipe B plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [igt_assert_crc_equal+0x73]
  #2 [test_plane_position.constprop.8+0x32e]
  #3 [run_tests_for_pipe_plane.constprop.6+0x140]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-dpms-pipe-B-plane-1: FAIL (2.850s)
Testing connector DP-1 using pipe B plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x1a2]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-top-left-pipe-B-plane-1: FAIL (0.005s)
Testing connector DP-1 using pipe B plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x274]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-pipe-B-plane-1: FAIL (0.005s)
Testing connector DP-1 using pipe B plane 1
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x2a0]
  #4 [__real_main414+0x28]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-suspend-pipe-B-plane-1: FAIL (0.003s)
Testing connector DP-1 using pipe B plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x8f]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-covered-pipe-B-plane-2: FAIL (0.003s)
Testing connector DP-1 using pipe B plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0xbc]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-pipe-B-plane-2: FAIL (0.003s)
Testing connector DP-1 using pipe B plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x140]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-dpms-pipe-B-plane-2: FAIL (0.003s)
Testing connector DP-1 using pipe B plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x1a2]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-top-left-pipe-B-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x274]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-pipe-B-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 2
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x2a0]
  #4 [__real_main414+0x34]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-suspend-pipe-B-plane-2: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x8f]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-covered-pipe-B-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0xbc]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-pipe-B-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_position.constprop.8+0x143]
  #3 [run_tests_for_pipe_plane.constprop.6+0x140]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-position-hole-dpms-pipe-B-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x1a2]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-top-left-pipe-B-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x274]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-pipe-B-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe B plane 3
Stack trace:
  #0 [__igt_fail_assert+0x101]
  #1 [pipe_crc_new+0x132]
  #2 [test_plane_panning.constprop.7+0x14c]
  #3 [run_tests_for_pipe_plane.constprop.6+0x2a0]
  #4 [__real_main414+0x43]
  #5 [main+0x23]
  #6 [__libc_start_main+0xf0]
  #7 [_start+0x29]
  #8 [<unknown>+0x29]
Subtest plane-panning-bottom-right-suspend-pipe-B-plane-3: FAIL (0.002s)
Testing connector DP-1 using pipe C plane 1
Test requirement not met in function test_grab_crc, file kms_plane.c:86:
Test requirement: !(ret != 0)
Subtest plane-position-covered-pipe-C-plane-1: SKIP (0.038s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-hole-pipe-C-plane-1: SKIP (0.000s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-hole-dpms-pipe-C-plane-1: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-top-left-pipe-C-plane-1: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-bottom-right-pipe-C-plane-1: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-bottom-right-suspend-pipe-C-plane-1: SKIP (0.000s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-covered-pipe-C-plane-2: SKIP (0.000s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-hole-pipe-C-plane-2: SKIP (0.000s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-hole-dpms-pipe-C-plane-2: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-top-left-pipe-C-plane-2: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-bottom-right-pipe-C-plane-2: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-bottom-right-suspend-pipe-C-plane-2: SKIP (0.000s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-covered-pipe-C-plane-3: SKIP (0.000s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-hole-pipe-C-plane-3: SKIP (0.000s)
Test requirement not met in function test_plane_position, file kms_plane.c:240:
Test requirement: !(connected_outs == 0)
Subtest plane-position-hole-dpms-pipe-C-plane-3: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-top-left-pipe-C-plane-3: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-bottom-right-pipe-C-plane-3: SKIP (0.000s)
Test requirement not met in function test_plane_panning, file kms_plane.c:367:
Test requirement: !(connected_outs == 0)
Subtest plane-panning-bottom-right-suspend-pipe-C-plane-3: SKIP (0.000s)