[ 0.000000] Linux version 4.6.0-gentoo (root@voyo) (gcc version 5.3.0 (Gentoo 5.3.0 p1.1, pie-0.6.5) ) #1 SMP Wed Jun 1 22:02:05 CEST 2016 [ 0.000000] Command line: BOOT_IMAGE=/kernel-4.6.0-gentoo root=/dev/sda4 ro net.ifnames=0 drm.debug=0x1e log_buf_len=1M [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000073615fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000073616000-0x0000000073645fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000073646000-0x0000000073679fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007367a000-0x000000007373efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007373f000-0x0000000073a04fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000073a05000-0x0000000073a70fff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000073a71000-0x0000000073ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x73644000 ACPI=0x73651000 ACPI 2.0=0x73651000 SMBIOS=0x738fd000 SMBIOS 3.0=0x738fc000 [ 0.000000] efi: requested map not found. [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 078000000 mask FF8000000 uncachable [ 0.000000] 2 base 077000000 mask FFF000000 uncachable [ 0.000000] 3 base 076800000 mask FFF800000 uncachable [ 0.000000] 4 base 100000000 mask F80000000 write-back [ 0.000000] 5 base 076400000 mask FFFC00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0x76400000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x74000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x02730000, 0x02730fff] PGTABLE [ 0.000000] BRK [0x02731000, 0x02731fff] PGTABLE [ 0.000000] BRK [0x02732000, 0x02732fff] PGTABLE [ 0.000000] BRK [0x02733000, 0x02733fff] PGTABLE [ 0.000000] BRK [0x02734000, 0x02734fff] PGTABLE [ 0.000000] BRK [0x02735000, 0x02735fff] PGTABLE [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 257804(98%) [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000073651000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000736510B0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007366F460 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x0000000073651228 01E234 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x000000007373EF80 000040 [ 0.000000] ACPI: APIC 0x000000007366F570 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007366F5F8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007366F640 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MSDM 0x000000007366F6E0 000055 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007366F738 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000007366F778 004352 (v01 DptfTb DptfTab 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000073673AD0 000654 (v01 CpuDpf CpuDptf 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000073674128 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x0000000073674180 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000736741C8 000269 (v01 UsbCTb UsbCTab 00001000 INTL 20120913) [ 0.000000] ACPI: HPET 0x0000000073674438 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x0000000073674470 000763 (v01 PmRef CpuPm 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000073674BD8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000073674E68 00017A (v01 PmRef ApTst 00003000 INTL 20120913) [ 0.000000] ACPI: LPIT 0x0000000073674FE8 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D) [ 0.000000] ACPI: BCFG 0x00000000736750F0 000139 (v01 INTEL BATTCONF 00000001 INTL 00000000) [ 0.000000] ACPI: PRAM 0x0000000073675230 000030 (v01 00000001 00000000) [ 0.000000] ACPI: TPM2 0x0000000073675260 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.000000] ACPI: CSRT 0x0000000073675298 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) [ 0.000000] ACPI: WDAT 0x00000000736753E8 000104 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000736754F0 004352 (v01 DptfTb DptfTab 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000073679848 000654 (v01 CpuDpf CpuDptf 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000073679EA0 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x17fefa000-0x17fefdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000073615fff] [ 0.000000] node 0: [mem 0x0000000073a71000-0x0000000073ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.000000] On node 0 totalpages: 993601 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7271 pages used for memmap [ 0.000000] DMA32 zone: 465317 pages, LIFO batch:31 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x76e00000-0x7edfffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x73616000-0x73645fff] [ 0.000000] PM: Registered nosave memory: [mem 0x73646000-0x73679fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7367a000-0x7373efff] [ 0.000000] PM: Registered nosave memory: [mem 0x7373f000-0x73a04fff] [ 0.000000] PM: Registered nosave memory: [mem 0x73a05000-0x73a70fff] [ 0.000000] PM: Registered nosave memory: [mem 0x74000000-0x76dfffff] [ 0.000000] PM: Registered nosave memory: [mem 0x76e00000-0x7edfffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ee00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0x7ee00000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 32 pages/cpu @ffff88017fc00000 s91096 r8192 d31784 u524288 [ 0.000000] pcpu-alloc: s91096 r8192 d31784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 978052 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-4.6.0-gentoo root=/dev/sda4 ro net.ifnames=0 drm.debug=0x1e log_buf_len=1M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3788964K/3974404K available (9311K kernel code, 1185K rwdata, 2744K rodata, 1108K init, 920K bss, 185440K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 1599.951 MHz processor [ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.90 BogoMIPS (lpj=1599951) [ 0.000054] pid_max: default: 32768 minimum: 301 [ 0.000073] ACPI: Core revision 20160108 [ 0.034075] ACPI Error: [LAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20160108/dswload-378) [ 0.034105] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160108/psobject-227) [ 0.034176] ACPI Exception: AE_ALREADY_EXISTS, (SSDT: DptfTab) while loading table (20160108/tbxfload-227) [ 0.036239] ACPI Error: [\_SB_.DPTF] Namespace lookup failure, AE_NOT_FOUND (20160108/dswload-210) [ 0.036260] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160108/psobject-227) [ 0.036326] ACPI Exception: AE_NOT_FOUND, (SSDT: LowPwrM) while loading table (20160108/tbxfload-227) [ 0.044153] ACPI Error: [LAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20160108/dswload-378) [ 0.044174] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160108/psobject-227) [ 0.044242] ACPI Exception: AE_ALREADY_EXISTS, (SSDT: DptfTab) while loading table (20160108/tbxfload-227) [ 0.044266] ACPI Error: [PNIT] Namespace lookup failure, AE_ALREADY_EXISTS (20160108/dswload-378) [ 0.044285] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160108/psobject-227) [ 0.044352] ACPI Exception: AE_ALREADY_EXISTS, (SSDT: CpuDptf) while loading table (20160108/tbxfload-227) [ 0.044373] ACPI Error: [\_SB_.DPTF] Namespace lookup failure, AE_NOT_FOUND (20160108/dswload-210) [ 0.044391] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160108/psobject-227) [ 0.044457] ACPI Exception: AE_NOT_FOUND, (SSDT: LowPwrM) while loading table (20160108/tbxfload-227) [ 0.044489] ACPI Error: 5 table load failures, 6 successful (20160108/tbxfload-247) [ 0.045153] Security Framework initialized [ 0.045169] SELinux: Initializing. [ 0.045186] SELinux: Starting in permissive mode [ 0.045725] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.048048] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.049115] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.049142] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.049599] CPU: Physical Processor ID: 0 [ 0.049614] CPU: Processor Core ID: 0 [ 0.049625] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.049633] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.049653] mce: CPU supports 6 MCE banks [ 0.049673] CPU0: Thermal monitoring enabled (TM1) [ 0.049684] process: using mwait in idle threads [ 0.049696] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.049705] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 [ 0.050253] Freeing SMP alternatives memory: 36K (ffffffff8203f000 - ffffffff82048000) [ 0.053982] smpboot: Max logical packages: 1 [ 0.053998] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.055587] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.065611] TSC deadline timer enabled [ 0.065620] smpboot: CPU0: Intel(R) Atom(TM) x7-Z8700 CPU @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3) [ 0.065676] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.065716] ... version: 3 [ 0.065724] ... bit width: 40 [ 0.065732] ... generic registers: 2 [ 0.065740] ... value mask: 000000ffffffffff [ 0.065748] ... max period: 000000ffffffffff [ 0.065755] ... fixed-purpose events: 3 [ 0.065763] ... event mask: 0000000700000003 [ 0.066658] x86: Booting SMP configuration: [ 0.066671] .... node #0, CPUs: #1 #2 #3 [ 0.253273] x86: Booted up 1 node, 4 CPUs [ 0.253289] smpboot: Total of 4 processors activated (12823.38 BogoMIPS) [ 0.254853] devtmpfs: initialized [ 0.255411] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.255429] PM: Registering ACPI NVS region [mem 0x7367a000-0x7373efff] (806912 bytes) [ 0.255632] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.255693] kworker/u8:0 (29) used greatest stack depth: 14152 bytes left [ 0.255803] RTC time: 20:40:21, date: 06/01/16 [ 0.256123] NET: Registered protocol family 16 [ 0.256580] i2c-core: driver [dummy] registered [ 0.262231] cpuidle: using governor menu [ 0.262393] ACPI: bus type PCI registered [ 0.262519] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.262537] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.262549] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.262580] PCI: Using configuration type 1 for base access [ 0.264323] kworker/u8:2 (115) used greatest stack depth: 14056 bytes left [ 0.277717] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.278114] ACPI: Added _OSI(Module Device) [ 0.278125] ACPI: Added _OSI(Processor Device) [ 0.278134] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.278142] ACPI: Added _OSI(Processor Aggregator Device) [ 0.307367] ACPI: Dynamic OEM Table Load: [ 0.307397] ACPI: SSDT 0xFFFF88017AA10000 0006A4 (v01 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.309461] ACPI: Dynamic OEM Table Load: [ 0.309480] ACPI: SSDT 0xFFFF88017AA3C400 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.311952] ACPI: Dynamic OEM Table Load: [ 0.311970] ACPI: SSDT 0xFFFF880072ED5000 00015F (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.313946] ACPI: Dynamic OEM Table Load: [ 0.313963] ACPI: SSDT 0xFFFF88017AA20E40 00008D (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.317980] ACPI: Interpreter enabled [ 0.318031] ACPI: (supports S0 S4 S5) [ 0.318042] ACPI: Using IOAPIC for interrupt routing [ 0.318129] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.319070] ACPI: Power Resource [P18W] (off) [ 0.319181] ACPI: Power Resource [P33W] (off) [ 0.321238] ACPI: Power Resource [ID3C] (on) [ 0.323798] ACPI: Power Resource [USBC] (on) [ 0.324733] ACPI: Power Resource [WWPR] (off) [ 0.325959] ACPI: Power Resource [WWPR] (off) [ 0.326702] ACPI: Power Resource [WWPR] (off) [ 0.327542] ACPI: Power Resource [WWPR] (off) [ 0.328325] ACPI: Power Resource [WWPR] (off) [ 0.342137] ACPI: Power Resource [CLK3] (on) [ 0.342254] ACPI: Power Resource [CLK4] (off) [ 0.349836] ACPI: Power Resource [CLK2] (on) [ 0.350401] ACPI: Power Resource [CLK1] (on) [ 0.352392] ACPI: Power Resource [CLK0] (on) [ 0.352511] ACPI: Power Resource [CLK1] (on) [ 0.352786] ACPI: Power Resource [P28W] (off) [ 0.354080] ACPI: Power Resource [P4BW] (off) [ 0.369211] ACPI: Power Resource [P28X] (off) [ 0.369335] ACPI: Power Resource [P18X] (off) [ 0.369442] ACPI: Power Resource [P12X] (off) [ 0.369554] ACPI: Power Resource [P28P] (off) [ 0.369664] ACPI: Power Resource [P18P] (off) [ 0.369770] ACPI: Power Resource [P19X] (off) [ 0.369882] ACPI: Power Resource [P06X] (off) [ 0.370000] ACPI: Power Resource [P12A] (off) [ 0.370118] ACPI: Power Resource [P28T] (off) [ 0.370238] ACPI: Power Resource [P18D] (off) [ 0.370353] ACPI: Power Resource [P18T] (off) [ 0.370460] ACPI: Power Resource [P3P3] (off) [ 0.370569] ACPI: Power Resource [P12T] (off) [ 0.370687] ACPI: Power Resource [P12W] (off) [ 0.370799] ACPI: Power Resource [P33X] (off) [ 0.375743] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.375767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.376269] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.376311] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.376729] PCI host bridge to bus 0000:00 [ 0.376742] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.376753] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.376763] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.376773] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.376784] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.376798] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.376812] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.376826] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window] [ 0.376840] pci_bus 0000:00: root bus resource [mem 0x76e00001-0x7ee00000 window] [ 0.376854] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.376868] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.376890] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.377263] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000 [ 0.377290] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.377307] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.377318] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.377651] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000 [ 0.377669] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x913fffff] [ 0.378027] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000 [ 0.378053] pci 0000:00:0b.0: reg 0x10: [mem 0x9192b000-0x9192bfff 64bit] [ 0.378437] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.378474] pci 0000:00:14.0: reg 0x10: [mem 0x91900000-0x9190ffff 64bit] [ 0.378580] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.378904] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.378931] pci 0000:00:1a.0: reg 0x10: [mem 0x91700000-0x917fffff] [ 0.378947] pci 0000:00:1a.0: reg 0x14: [mem 0x91600000-0x916fffff] [ 0.379061] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.379354] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.379477] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.379770] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.380276] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601 [ 0.380306] pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057] [ 0.380323] pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043] [ 0.380341] pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037] [ 0.380359] pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023] [ 0.380377] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f] [ 0.380395] pci 0000:01:00.0: reg 0x24: [mem 0x91810000-0x918101ff] [ 0.380413] pci 0000:01:00.0: reg 0x30: [mem 0x91800000-0x9180ffff pref] [ 0.382012] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.382028] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.382035] pci 0000:00:1c.0: bridge window [mem 0x91800000-0x918fffff] [ 0.388265] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.388442] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.388604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.388764] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.388929] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.389111] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.389273] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.389434] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.392855] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.392870] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.392885] vgaarb: loaded [ 0.392893] vgaarb: bridge control possible 0000:00:02.0 [ 0.393092] SCSI subsystem initialized [ 0.393241] libata version 3.00 loaded. [ 0.393421] ACPI: bus type USB registered [ 0.393535] usbcore: registered new interface driver usbfs [ 0.393578] usbcore: registered new interface driver hub [ 0.393631] usbcore: registered new device driver usb [ 0.393754] pps_core: LinuxPPS API ver. 1 registered [ 0.393764] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.393838] PTP clock support registered [ 0.394230] Advanced Linux Sound Architecture Driver Initialized. [ 0.394305] PCI: Using ACPI for IRQ routing [ 0.397077] PCI: pci_cache_line_size set to 64 bytes [ 0.397130] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.397144] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.397148] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.397152] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.397155] e820: reserve RAM buffer [mem 0x73616000-0x73ffffff] [ 0.397726] NetLabel: Initializing [ 0.397737] NetLabel: domain hash size = 128 [ 0.397744] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.397774] NetLabel: unlabeled traffic allowed by default [ 0.398019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.398037] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.400128] clocksource: Switched to clocksource hpet [ 0.414634] VFS: Disk quotas dquot_6.6.0 [ 0.414687] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.421370] pnp: PnP ACPI init [ 0.421686] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.421699] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.421709] system 00:00: [io 0x0500-0x05fe] has been reserved [ 0.421724] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.421900] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.427416] system 00:02: [mem 0x91929000-0x91929fff] has been reserved [ 0.427432] system 00:02: [mem 0x91927000-0x91927fff] has been reserved [ 0.427443] system 00:02: [mem 0x9191c000-0x9191cfff] has been reserved [ 0.427453] system 00:02: [mem 0x9191a000-0x9191afff] has been reserved [ 0.427464] system 00:02: [mem 0x91918000-0x91918fff] has been reserved [ 0.427475] system 00:02: [mem 0x91925000-0x91925fff] has been reserved [ 0.427485] system 00:02: [mem 0x91923000-0x91923fff] has been reserved [ 0.427496] system 00:02: [mem 0x91921000-0x91921fff] has been reserved [ 0.427507] system 00:02: [mem 0x9191f000-0x9191ffff] has been reserved [ 0.427517] system 00:02: [mem 0x9191d000-0x9191dfff] has been reserved [ 0.427532] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.427812] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.427826] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.427837] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.427847] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.427858] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.427869] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.427880] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved [ 0.427891] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.427902] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.427917] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.428317] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.429330] pnp: PnP ACPI: found 5 devices [ 0.433968] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.434035] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.434055] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.434071] pci 0000:00:1c.0: bridge window [mem 0x91800000-0x918fffff] [ 0.434093] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.434099] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.434103] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.434107] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.434112] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.434116] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.434120] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.434164] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window] [ 0.434169] pci_bus 0000:00: resource 12 [mem 0x76e00001-0x7ee00000 window] [ 0.434173] pci_bus 0000:00: resource 13 [mem 0x80000000-0xdfffffff window] [ 0.434177] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.434181] pci_bus 0000:01: resource 1 [mem 0x91800000-0x918fffff] [ 0.434247] NET: Registered protocol family 2 [ 0.434655] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.434843] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.435041] TCP: Hash tables configured (established 32768 bind 32768) [ 0.435120] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.435278] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.435448] NET: Registered protocol family 1 [ 0.435647] RPC: Registered named UNIX socket transport module. [ 0.435658] RPC: Registered udp transport module. [ 0.435666] RPC: Registered tcp transport module. [ 0.435674] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.435711] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.436186] PCI: CLS 64 bytes, default 64 [ 0.436323] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.436336] software IO TLB [mem 0x6d441000-0x71441000] (64MB) mapped at [ffff88006d441000-ffff880071440fff] [ 0.437409] Scanning for low memory corruption every 60 seconds [ 0.438328] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.438398] audit: initializing netlink subsys (disabled) [ 0.438430] audit: type=2000 audit(1464813621.432:1): initialized [ 0.439353] workingset: timestamp_bits=54 max_order=20 bucket_order=0 [ 0.446083] NFS: Registering the id_resolver key type [ 0.446115] Key type id_resolver registered [ 0.446214] Key type id_legacy registered [ 0.446501] SELinux: Registering netfilter hooks [ 0.449676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.449701] io scheduler noop registered [ 0.449712] io scheduler deadline registered [ 0.449802] io scheduler cfq registered (default) [ 0.450462] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.450476] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.450490] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.450514] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.450638] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.471166] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.472331] Non-volatile memory driver v1.3 [ 0.472425] Linux agpgart interface v0.103 [ 0.472528] efifb: probing for efifb [ 0.472559] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, using 8128k, total 8128k [ 0.472575] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.472583] efifb: scrolling: redraw [ 0.472591] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.489807] Console: switching to colour frame buffer device 240x67 [ 0.505736] fb0: EFI VGA frame buffer device [ 0.506241] ACPI: AC Adapter [ADP1] (on-line) [ 0.506488] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.506603] ACPI: Power Button [PWRB] [ 0.506755] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.506856] ACPI: Power Button [PWRF] [ 0.507274] Monitor-Mwait will be used to enter C-1 state [ 0.507286] Monitor-Mwait will be used to enter C-2 state [ 0.507294] Monitor-Mwait will be used to enter C-3 state [ 0.512842] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.512930] ACPI: Thermal Zone [TZ00] (0 C) [ 0.513078] [drm] Initialized drm 1.1.0 20060810 [ 0.514275] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x22b0 rev=0x20 flags=need_gfx_hws,is_cherryview,has_hotplug, [ 0.514304] [drm:intel_detect_pch] No PCH found. [ 0.514720] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 131072K, usable: 130048K [ 0.514724] [drm] Memory usable by graphics device = 2048M [ 0.514803] [drm:i915_gem_gtt_init] GMADR size = 256M [ 0.514806] [drm:i915_gem_gtt_init] GTT stolen size = 128M [ 0.514809] [drm:i915_gem_gtt_init] ppgtt mode: 2 [ 0.514815] checking generic (80000000 7f0000) vs hw (80000000 10000000) [ 0.514818] fb: switching to inteldrmfb from EFI VGA [ 0.514931] Console: switching to colour dummy device 80x25 [ 0.515061] [drm] Replacing VGA console driver [ 0.515120] [drm:intel_opregion_setup] graphic opregion physical addr: 0x736e5000 [ 0.515215] [drm:intel_opregion_setup] Public ACPI methods supported [ 0.515218] [drm:intel_opregion_setup] ASLE supported [ 0.515224] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 0.515467] [drm:intel_device_info_runtime_init] slice total: 1 [ 0.515471] [drm:intel_device_info_runtime_init] subslice total: 2 [ 0.515473] [drm:intel_device_info_runtime_init] subslice per slice: 2 [ 0.515476] [drm:intel_device_info_runtime_init] EU total: 16 [ 0.515479] [drm:intel_device_info_runtime_init] EU per subslice: 8 [ 0.515482] [drm:intel_device_info_runtime_init] has slice power gating: n [ 0.515485] [drm:intel_device_info_runtime_init] has subslice power gating: y [ 0.515489] [drm:intel_device_info_runtime_init] has EU power gating: y [ 0.515493] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.515502] [drm] Driver supports precise vblank timestamp query. [ 0.515512] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 0.515516] [drm:intel_bios_init] VBT signature "$VBT CHERRYVIEW ", BDB version 195 [ 0.515521] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 0.515524] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 0.515528] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 0.515533] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 0.515539] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 0.515545] [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [ 0.515549] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 0.515552] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 0.515556] [drm:parse_driver_features] DRRS State Enabled:1 [ 0.515579] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 0.523155] [drm:chv_phy_control_init] Initial PHY_CONTROL=0x150007fd [ 0.523161] [drm:intel_power_well_enable] enabling always-on [ 0.523164] [drm:intel_power_well_enable] enabling display [ 0.525203] [drm:intel_power_well_enable] enabling dpio-common-bc [ 0.535337] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x150007fd) [ 0.543442] [drm:intel_power_well_enable] enabling dpio-common-d [ 0.559646] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150007ff) [ 0.586114] i2c i2c-0: adapter [i915 gmbus ssc] registered [ 0.586406] i2c i2c-1: adapter [i915 gmbus vga] registered [ 0.586462] i2c i2c-2: adapter [i915 gmbus panel] registered [ 0.586512] i2c i2c-3: adapter [i915 gmbus dpc] registered [ 0.586560] i2c i2c-4: adapter [i915 gmbus dpb] registered [ 0.586614] i2c i2c-5: adapter [i915 gmbus dpd] registered [ 0.586655] [drm:intel_modeset_init] 3 display pipes available. [ 0.590751] [drm:intel_update_czclk] CZ clock rate: 320000 kHz [ 0.592781] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 0.592785] [drm:intel_update_max_cdclk] Max CD clock rate: 320000 kHz [ 0.592788] [drm:intel_update_max_cdclk] Max dotclock rate: 304000 kHz [ 0.592795] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.593261] [drm:intel_dp_init_connector] Adding DP connector on port D [ 0.593337] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-1 [ 0.593384] i2c i2c-6: adapter [DPDDC-D] registered [ 0.593403] [drm:intel_dsi_init] [ 0.593417] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled [ 0.603562] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: enabled [ 0.603569] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled [ 0.603576] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A [ 0.603583] [drm:intel_modeset_readout_hw_state] [ENCODER:44:TMDS-44] hw state readout: disabled, pipe A [ 0.603588] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled [ 0.603593] [drm:intel_modeset_readout_hw_state] [CONNECTOR:45:DP-1] hw state readout: disabled [ 0.603605] [drm:drm_atomic_set_mode_for_crtc] Set [MODE:1920x1080] for CRTC state ffff88017a402c00 [ 0.603613] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff88017a401800 for pipe A [ 0.603616] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 0.603619] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 0.603623] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.603627] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.603631] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 0.603636] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.603638] [drm:intel_dump_pipe_config] requested mode: [ 0.603643] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.603646] [drm:intel_dump_pipe_config] adjusted mode: [ 0.603651] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.603655] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 0.603658] [drm:intel_dump_pipe_config] port clock: 0 [ 0.603661] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 0.603664] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 0.603668] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.603671] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.603674] [drm:intel_dump_pipe_config] ips: 0 [ 0.603677] [drm:intel_dump_pipe_config] double wide: 0 [ 0.603681] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 0.603683] [drm:intel_dump_pipe_config] planes on this crtc [ 0.603687] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0 [ 0.603691] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [ 0.603695] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [ 0.603699] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0 [ 0.603725] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 0.625552] [drm:intel_disable_pipe] disabling pipe B [ 0.649848] [drm:vlv_pipe_set_fifo_size] Pipe B FIFO split 511 / 511 / 511 [ 0.649859] [drm:vlv_update_wm] Setting FIFO watermarks - B: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=2 cxsr=0 [ 0.659996] [drm:intel_sanitize_crtc] [CRTC:31] hw state adjusted, was enabled, now disabled [ 0.660004] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff88017a402c00 [ 0.660009] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff88017a402c00 for pipe B [ 0.660012] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 0.660014] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 0.660018] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.660022] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.660026] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 0.660029] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.660032] [drm:intel_dump_pipe_config] requested mode: [ 0.660037] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.660040] [drm:intel_dump_pipe_config] adjusted mode: [ 0.660045] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x0 [ 0.660050] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2448 2492 2640 1080 1084 1089 1125, type: 0x40 flags: 0x0 [ 0.660053] [drm:intel_dump_pipe_config] port clock: 148500 [ 0.660056] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 0.660059] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 0.660063] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.660066] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.660069] [drm:intel_dump_pipe_config] ips: 0 [ 0.660072] [drm:intel_dump_pipe_config] double wide: 0 [ 0.660075] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xb0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 0.660078] [drm:intel_dump_pipe_config] planes on this crtc [ 0.660082] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = 0 [ 0.660086] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = 0 [ 0.660090] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = 0 [ 0.660094] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = 0 [ 0.660100] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff88017aabfc00 for pipe C [ 0.660103] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 0.660106] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 0.660110] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.660114] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 0.660118] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 0.660150] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 0.660153] [drm:intel_dump_pipe_config] requested mode: [ 0.660158] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.660161] [drm:intel_dump_pipe_config] adjusted mode: [ 0.660166] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 0.660170] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 0.660173] [drm:intel_dump_pipe_config] port clock: 0 [ 0.660176] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 0.660179] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 0.660182] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 0.660186] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 0.660189] [drm:intel_dump_pipe_config] ips: 0 [ 0.660191] [drm:intel_dump_pipe_config] double wide: 0 [ 0.660195] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 0.660197] [drm:intel_dump_pipe_config] planes on this crtc [ 0.660202] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = 0 [ 0.660206] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = 0 [ 0.660210] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = 0 [ 0.660214] [drm:intel_dump_pipe_config] STANDARD PLANE:38 plane: 2.2 idx: 11 disabled, scaler_id = 0 [ 0.660231] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256 [ 0.660236] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128 [ 0.660241] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127 [ 0.660246] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 511 [ 0.660251] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 0 [ 0.660255] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 0 [ 0.660260] [drm:vlv_get_fifo_size] Pipe C primary C FIFO size: 256 [ 0.660265] [drm:vlv_get_fifo_size] Pipe C sprite E FIFO size: 128 [ 0.660270] [drm:vlv_get_fifo_size] Pipe C sprite F FIFO size: 127 [ 0.670395] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=0, cursor=0, sprite0=0, sprite1=0 [ 0.670400] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=0, cursor=0, sprite0=0, sprite1=0 [ 0.670404] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe C, plane=0, cursor=0, sprite0=0, sprite1=0 [ 0.670407] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=0, SR cursor=0 level=2 cxsr=0 [ 0.670413] [drm:intel_power_well_disable] disabling dpio-common-d [ 0.678519] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150007fd) [ 0.686622] [drm:intel_power_well_disable] disabling dpio-common-bc [ 0.694727] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x150007fc) [ 0.702830] [drm:intel_power_well_disable] disabling display [ 0.711005] [drm:intel_power_well_disable] disabling always-on [ 0.711022] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 7ffff000] [ 0.712412] [drm:i915_gem_context_init] LR context support initialized [ 0.712537] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00001000 [ 0.712688] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 0.712696] [drm:i915_pages_create_for_stolen] offset=0x1000, size=16384 [ 0.712994] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 0.713001] [drm:i915_pages_create_for_stolen] offset=0x5000, size=16384 [ 0.713239] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 0.713247] [drm:i915_pages_create_for_stolen] offset=0x9000, size=16384 [ 0.713418] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 0.713425] [drm:i915_pages_create_for_stolen] offset=0xd000, size=16384 [ 0.713656] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 0.713667] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 0.713676] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 0.713683] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 0.713935] [drm:cherryview_setup_pctx] PCBR: 0x7edf8001 [ 0.713944] [drm:cherryview_init_gt_powersave] DDR speed: 1600 MHz [ 0.715151] [drm:cherryview_init_gt_powersave] max GPU freq: 600 MHz (60) [ 0.717158] [drm:cherryview_init_gt_powersave] RPe GPU freq: 400 MHz (40) [ 0.719308] [drm:cherryview_init_gt_powersave] RP1(Guar) GPU freq: 400 MHz (40) [ 0.719314] [drm:cherryview_init_gt_powersave] min GPU freq: 400 MHz (40) [ 0.721467] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 0.721486] [drm:intel_fbdev_init_bios] pipe A not active or no fb, skipping [ 0.721489] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 0.721492] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 0.721496] [drm:intel_fbdev_init_bios] no active fbs found, not using BIOS config [ 0.721621] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:HDMI-A-1] [ 0.721628] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1] [ 0.721635] [drm:intel_power_well_enable] enabling display [ 0.721975] [drm:intel_didl_outputs] 9 outputs detected [ 0.723409] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.725817] acpi device:01: registered as cooling_device4 [ 0.726552] acpi device:02: registered as cooling_device5 [ 0.727275] acpi device:03: registered as cooling_device6 [ 0.727959] acpi device:04: registered as cooling_device7 [ 0.728683] acpi device:05: registered as cooling_device8 [ 0.729193] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 0.729406] acpi device:06: registered as cooling_device9 [ 0.729517] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 0.729523] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 0.729693] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 0.729699] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 0.729865] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 0.729872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 0.729876] [drm:intel_power_well_disable] disabling display [ 0.730101] acpi device:07: registered as cooling_device10 [ 0.730826] acpi device:08: registered as cooling_device11 [ 0.731012] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 0.731182] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0 [ 0.735170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:HDMI-A-1] status updated from unknown to disconnected [ 0.735181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:HDMI-A-1] disconnected [ 0.735187] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] [ 0.735190] [drm:intel_dp_detect] [CONNECTOR:45:DP-1] [ 0.735195] [drm:intel_power_well_enable] enabling display [ 0.735668] loop: module loaded [ 0.735895] ahci 0000:01:00.0: version 3.0 [ 0.736215] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 0.736281] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.736300] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.737040] scsi host0: ahci [ 0.737387] scsi host1: ahci [ 0.737521] ata1: SATA max UDMA/133 abar m512@0x91810000 port 0x91810100 irq 117 [ 0.737538] ata2: SATA max UDMA/133 abar m512@0x91810000 port 0x91810180 irq 117 [ 0.737647] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.737659] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.737704] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.737714] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.737753] sky2: driver version 1.30 [ 0.737902] usbcore: registered new interface driver rt2800usb [ 0.738161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.738177] ehci-pci: EHCI PCI platform driver [ 0.738223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.738243] ohci-pci: OHCI PCI platform driver [ 0.738285] uhci_hcd: USB Universal Host Controller Interface driver [ 0.738626] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.738756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.739964] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00509810 [ 0.739994] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.740251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.740265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.740280] usb usb1: Product: xHCI Host Controller [ 0.740291] usb usb1: Manufacturer: Linux 4.6.0-gentoo xhci-hcd [ 0.740300] usb usb1: SerialNumber: 0000:00:14.0 [ 0.740639] hub 1-0:1.0: USB hub found [ 0.740676] hub 1-0:1.0: 7 ports detected [ 0.742765] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.742899] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.743002] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.743014] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.743029] usb usb2: Product: xHCI Host Controller [ 0.743038] usb usb2: Manufacturer: Linux 4.6.0-gentoo xhci-hcd [ 0.743048] usb usb2: SerialNumber: 0000:00:14.0 [ 0.743196] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 0.743432] hub 2-0:1.0: USB hub found [ 0.743468] hub 2-0:1.0: 6 ports detected [ 0.743511] [drm:intel_power_well_enable] enabling dpio-common-d [ 0.745229] usbcore: registered new interface driver usblp [ 0.745292] usbcore: registered new interface driver usb-storage [ 0.745385] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.759169] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150007fe) [ 0.769685] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 0.772171] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 1.288670] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 1.827254] tsc: Refined TSC clocksource calibration: 1599.948 MHz [ 1.827273] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff3c37d3, max_idle_ns: 440795211487 ns [ 1.827650] i8042: No controller found [ 1.828225] mousedev: PS/2 mouse device common for all mice [ 1.829018] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.829092] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.829421] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.829459] EFI Variables Facility v0.08 2004-May-17 [ 1.829763] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 1.831175] [drm:intel_power_well_disable] disabling dpio-common-d [ 1.832828] hidraw: raw HID events driver (C) Jiri Kosina [ 1.833825] usbcore: registered new interface driver usbhid [ 1.833840] usbhid: USB HID core driver [ 1.834656] Netfilter messages via NETLINK v0.30. [ 1.834694] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.834928] ctnetlink v0.93: registering with nfnetlink. [ 1.835394] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.835459] Initializing XFRM netlink socket [ 1.835816] NET: Registered protocol family 10 [ 1.836301] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.836923] sit: IPv6 over IPv4 tunneling driver [ 1.837303] NET: Registered protocol family 17 [ 1.837396] Key type dns_resolver registered [ 1.838002] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x35e [ 1.838043] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x35e [ 1.838073] microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x35e [ 1.838113] microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x35e [ 1.838310] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.838841] registered taskstats version 1 [ 1.839168] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150007fc) [ 1.839526] Magic number: 4:329:699 [ 1.839732] console [netcon0] enabled [ 1.839742] netconsole: network logging started [ 1.841721] PM: Hibernation image not present or could not be loaded. [ 1.841730] ALSA device list: [ 1.841743] No soundcards found. [ 1.845178] [drm:intel_power_well_disable] disabling display [ 1.849166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] status updated from unknown to disconnected [ 1.849176] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected [ 1.849188] i915 0000:00:02.0: No connectors reported connected with modes [ 1.849206] [drm:drm_setup_crtcs] [ 1.849213] [drm:drm_enable_connectors] connector 40 enabled? no [ 1.849216] [drm:drm_enable_connectors] connector 45 enabled? no [ 1.849222] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.849225] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.849228] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.849233] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.849239] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.849250] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.849257] [drm:i915_gem_object_create_stolen] creating stolen object: size=300000 [ 1.849271] [drm:i915_pages_create_for_stolen] offset=0x11000, size=3145728 [ 1.850303] [drm:intelfb_create] allocated 1024x768 fb: 0x000c0000, bo ffff8800725ac000 [ 1.850477] fbcon: inteldrmfb (fb0) is primary device [ 1.850628] [drm:drm_atomic_state_init] Allocated atomic state ffff8800724e4000 [ 1.850634] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] ffff880072c17180 state to ffff8800724e4000 [ 1.850639] [drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] ffff880072c17000 state to ffff8800724e4000 [ 1.850642] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17000 to [NOCRTC] [ 1.850644] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17000 [ 1.850647] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] ffff880072c17f00 state to ffff8800724e4000 [ 1.850650] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17f00 to [NOCRTC] [ 1.850651] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17f00 [ 1.850654] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] ffff880072c17e40 state to ffff8800724e4000 [ 1.850656] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17e40 to [NOCRTC] [ 1.850657] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17e40 [ 1.850661] [drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] ffff880072c17cc0 state to ffff8800724e4000 [ 1.850665] [drm:drm_atomic_get_plane_state] Added [PLANE:30:plane-5] ffff880072c17b40 state to ffff8800724e4000 [ 1.850669] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17b40 to [NOCRTC] [ 1.850670] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17b40 [ 1.850673] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] ffff880072c17a80 state to ffff8800724e4000 [ 1.850674] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17a80 to [NOCRTC] [ 1.850675] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17a80 [ 1.850679] [drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] ffff880072c17900 state to ffff8800724e4000 [ 1.850681] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17900 to [NOCRTC] [ 1.850682] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17900 [ 1.850685] [drm:drm_atomic_get_plane_state] Added [PLANE:34:plane-8] ffff880072c17780 state to ffff8800724e4000 [ 1.850690] [drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-9] ffff880072c17600 state to ffff8800724e4000 [ 1.850692] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17600 to [NOCRTC] [ 1.850693] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17600 [ 1.850697] [drm:drm_atomic_get_plane_state] Added [PLANE:37:plane-10] ffff880072c17540 state to ffff8800724e4000 [ 1.850698] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17540 to [NOCRTC] [ 1.850700] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17540 [ 1.850703] [drm:drm_atomic_get_plane_state] Added [PLANE:38:plane-11] ffff880072c173c0 state to ffff8800724e4000 [ 1.850704] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c173c0 to [NOCRTC] [ 1.850705] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c173c0 [ 1.850711] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] ffff8800725ddc00 state to ffff8800724e4000 [ 1.850715] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725ddc00 [ 1.850716] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17180 to [NOCRTC] [ 1.850718] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17180 [ 1.850722] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to ffff8800724e4000 [ 1.850727] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:crtc-1] ffff8800725de000 state to ffff8800724e4000 [ 1.850729] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725de000 [ 1.850730] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17cc0 to [NOCRTC] [ 1.850732] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17cc0 [ 1.850734] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:crtc-1] to ffff8800724e4000 [ 1.850738] [drm:drm_atomic_get_crtc_state] Added [CRTC:36:crtc-2] ffff8800725de400 state to ffff8800724e4000 [ 1.850740] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725de400 [ 1.850742] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17780 to [NOCRTC] [ 1.850744] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17780 [ 1.850746] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:36:crtc-2] to ffff8800724e4000 [ 1.850748] [drm:drm_atomic_check_only] checking ffff8800724e4000 [ 1.850756] [drm:drm_atomic_commit] commiting ffff8800724e4000 [ 1.850767] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff8800724e4000 [ 1.850773] [drm:drm_atomic_state_free] Freeing atomic state ffff8800724e4000 [ 1.850783] [drm:drm_fb_helper_hotplug_event] [ 1.850786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:HDMI-A-1] [ 1.850788] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1] [ 1.850794] [drm:intel_power_well_enable] enabling display [ 1.858176] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 1.858496] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 1.858499] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 1.858936] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 1.858938] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry [ 1.859107] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1) [ 1.859112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel [ 1.859114] [drm:intel_power_well_disable] disabling display [ 1.867299] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:HDMI-A-1] disconnected [ 1.867304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] [ 1.867307] [drm:intel_dp_detect] [CONNECTOR:45:DP-1] [ 1.867310] [drm:intel_power_well_enable] enabling display [ 1.875754] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 1.876062] [drm:intel_power_well_enable] enabling dpio-common-d [ 1.892290] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x150007fe) [ 1.902926] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 1.905444] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 1.909665] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 1.913656] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x71450064 [ 1.915148] [drm:intel_power_well_disable] disabling dpio-common-d [ 1.923260] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x150007fc) [ 1.931369] [drm:intel_power_well_disable] disabling display [ 1.939488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected [ 1.939499] [drm:drm_setup_crtcs] [ 1.939502] [drm:drm_enable_connectors] connector 40 enabled? no [ 1.939503] [drm:drm_enable_connectors] connector 45 enabled? no [ 1.939507] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.939508] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.939511] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.939514] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.939520] [drm:drm_atomic_state_init] Allocated atomic state ffff8800724e4000 [ 1.939523] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] ffff880072c176c0 state to ffff8800724e4000 [ 1.939528] [drm:drm_atomic_get_plane_state] Added [PLANE:25:plane-1] ffff880072c17480 state to ffff8800724e4000 [ 1.939529] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17480 to [NOCRTC] [ 1.939532] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17480 [ 1.939535] [drm:drm_atomic_get_plane_state] Added [PLANE:27:plane-2] ffff880072c17240 state to ffff8800724e4000 [ 1.939537] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17240 to [NOCRTC] [ 1.939538] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17240 [ 1.939541] [drm:drm_atomic_get_plane_state] Added [PLANE:28:plane-3] ffff880072c170c0 state to ffff8800724e4000 [ 1.939542] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c170c0 to [NOCRTC] [ 1.939544] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c170c0 [ 1.939548] [drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] ffff880072c17840 state to ffff8800724e4000 [ 1.939551] [drm:drm_atomic_get_plane_state] Added [PLANE:30:plane-5] ffff880072c17c00 state to ffff8800724e4000 [ 1.939553] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17c00 to [NOCRTC] [ 1.939554] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17c00 [ 1.939557] [drm:drm_atomic_get_plane_state] Added [PLANE:32:plane-6] ffff880072c89900 state to ffff8800724e4000 [ 1.939559] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89900 to [NOCRTC] [ 1.939560] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89900 [ 1.939563] [drm:drm_atomic_get_plane_state] Added [PLANE:33:plane-7] ffff880072c89180 state to ffff8800724e4000 [ 1.939565] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89180 to [NOCRTC] [ 1.939566] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89180 [ 1.939569] [drm:drm_atomic_get_plane_state] Added [PLANE:34:plane-8] ffff880072c89d80 state to ffff8800724e4000 [ 1.939573] [drm:drm_atomic_get_plane_state] Added [PLANE:35:plane-9] ffff880072c89840 state to ffff8800724e4000 [ 1.939574] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89840 to [NOCRTC] [ 1.939576] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89840 [ 1.939578] [drm:drm_atomic_get_plane_state] Added [PLANE:37:plane-10] ffff880072c89300 state to ffff8800724e4000 [ 1.939580] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89300 to [NOCRTC] [ 1.939581] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89300 [ 1.939584] [drm:drm_atomic_get_plane_state] Added [PLANE:38:plane-11] ffff880072c89b40 state to ffff8800724e4000 [ 1.939585] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89b40 to [NOCRTC] [ 1.939587] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89b40 [ 1.939590] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] ffff8800725de800 state to ffff8800724e4000 [ 1.939592] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725de800 [ 1.939593] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c176c0 to [NOCRTC] [ 1.939594] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c176c0 [ 1.939597] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to ffff8800724e4000 [ 1.939602] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:crtc-1] ffff8800725dec00 state to ffff8800724e4000 [ 1.939603] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725dec00 [ 1.939605] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17840 to [NOCRTC] [ 1.939606] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17840 [ 1.939608] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:crtc-1] to ffff8800724e4000 [ 1.939613] [drm:drm_atomic_get_crtc_state] Added [CRTC:36:crtc-2] ffff8800725df000 state to ffff8800724e4000 [ 1.939615] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725df000 [ 1.939616] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89d80 to [NOCRTC] [ 1.939618] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89d80 [ 1.939620] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:36:crtc-2] to ffff8800724e4000 [ 1.939621] [drm:drm_atomic_check_only] checking ffff8800724e4000 [ 1.939627] [drm:drm_atomic_commit] commiting ffff8800724e4000 [ 1.939634] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff8800724e4000 [ 1.939640] [drm:drm_atomic_state_free] Freeing atomic state ffff8800724e4000 [ 1.939693] [drm:drm_atomic_state_init] Allocated atomic state ffff8800724e4000 [ 1.939698] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] ffff8800725de400 state to ffff8800724e4000 [ 1.939701] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] ffff880072c893c0 state to ffff8800724e4000 [ 1.939703] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725de400 [ 1.939704] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c893c0 to [NOCRTC] [ 1.939706] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c893c0 [ 1.939708] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to ffff8800724e4000 [ 1.939711] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:crtc-1] ffff8800725de000 state to ffff8800724e4000 [ 1.939714] [drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] ffff880072c89a80 state to ffff8800724e4000 [ 1.939716] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725de000 [ 1.939718] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89a80 to [NOCRTC] [ 1.939719] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89a80 [ 1.939721] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:crtc-1] to ffff8800724e4000 [ 1.939724] [drm:drm_atomic_get_crtc_state] Added [CRTC:36:crtc-2] ffff8800725ddc00 state to ffff8800724e4000 [ 1.939727] [drm:drm_atomic_get_plane_state] Added [PLANE:34:plane-8] ffff880072c890c0 state to ffff8800724e4000 [ 1.939729] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725ddc00 [ 1.939730] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c890c0 to [NOCRTC] [ 1.939732] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c890c0 [ 1.939734] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:36:crtc-2] to ffff8800724e4000 [ 1.939735] [drm:drm_atomic_check_only] checking ffff8800724e4000 [ 1.939740] [drm:drm_atomic_commit] commiting ffff8800724e4000 [ 1.939745] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff8800724e4000 [ 1.939748] [drm:drm_atomic_state_free] Freeing atomic state ffff8800724e4000 [ 1.946089] Console: switching to colour frame buffer device 128x48 [ 1.946098] [drm:drm_atomic_state_init] Allocated atomic state ffff8800724e4000 [ 1.946102] [drm:drm_atomic_get_crtc_state] Added [CRTC:26:crtc-0] ffff8800725df000 state to ffff8800724e4000 [ 1.946105] [drm:drm_atomic_get_plane_state] Added [PLANE:23:plane-0] ffff880072c89d80 state to ffff8800724e4000 [ 1.946107] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725df000 [ 1.946108] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c89d80 to [NOCRTC] [ 1.946110] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c89d80 [ 1.946112] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:26:crtc-0] to ffff8800724e4000 [ 1.946115] [drm:drm_atomic_get_crtc_state] Added [CRTC:31:crtc-1] ffff8800725dec00 state to ffff8800724e4000 [ 1.946118] [drm:drm_atomic_get_plane_state] Added [PLANE:29:plane-4] ffff880072c17840 state to ffff8800724e4000 [ 1.946134] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725dec00 [ 1.946135] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c17840 to [NOCRTC] [ 1.946137] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c17840 [ 1.946139] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:31:crtc-1] to ffff8800724e4000 [ 1.946143] [drm:drm_atomic_get_crtc_state] Added [CRTC:36:crtc-2] ffff8800725de800 state to ffff8800724e4000 [ 1.946145] [drm:drm_atomic_get_plane_state] Added [PLANE:34:plane-8] ffff880072c176c0 state to ffff8800724e4000 [ 1.946147] [drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for CRTC state ffff8800725de800 [ 1.946148] [drm:drm_atomic_set_crtc_for_plane] Link plane state ffff880072c176c0 to [NOCRTC] [ 1.946150] [drm:drm_atomic_set_fb_for_plane] Set [NOFB] for plane state ffff880072c176c0 [ 1.946152] [drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:36:crtc-2] to ffff8800724e4000 [ 1.946154] [drm:drm_atomic_check_only] checking ffff8800724e4000 [ 1.946158] [drm:drm_atomic_commit] commiting ffff8800724e4000 [ 1.946163] [drm:drm_atomic_state_default_clear] Clearing atomic state ffff8800724e4000 [ 1.946166] [drm:drm_atomic_state_free] Freeing atomic state ffff8800724e4000 [ 1.952863] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.981261] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.981533] ata1.00: ATA-9: FORESEE 128GB SSD, O1204A, max UDMA/133 [ 1.981619] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.981927] ata1.00: configured for UDMA/133 [ 1.983304] scsi 0:0:0:0: Direct-Access ATA FORESEE 128GB SS 4A PQ: 0 ANSI: 5 [ 1.994717] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.994719] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.995286] sd 0:0:0:0: [sda] Write Protect is off [ 1.995363] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.995476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.998254] sda: sda1 sda2 sda4 [ 1.999368] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.080157] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 2.247237] usb 1-3: New USB device found, idVendor=04b3, idProduct=301a [ 2.247343] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.247438] usb 1-3: Product: USB 1.1 2port downstream low power hub [ 2.247522] usb 1-3: Manufacturer: Lite-On Technology [ 2.249111] hub 1-3:1.0: USB hub found [ 2.249381] hub 1-3:1.0: 3 ports detected [ 2.298806] ata2: SATA link down (SStatus 0 SControl 300) [ 2.298960] md: Waiting for all devices to be available before autodetect [ 2.299057] md: If you don't use raid, use raid=noautodetect [ 2.302160] md: Autodetecting RAID arrays. [ 2.304638] md: Scanned 0 and added 0 devices. [ 2.307081] md: autorun ... [ 2.309503] md: ... autorun DONE. [ 2.312274] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities [ 2.315092] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities [ 2.324261] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 2.326741] VFS: Mounted root (ext4 filesystem) readonly on device 8:4. [ 2.330939] devtmpfs: mounted [ 2.336685] Freeing unused kernel memory: 1108K (ffffffff81f2a000 - ffffffff8203f000) [ 2.339220] Write protecting the kernel read-only data: 14336k [ 2.342915] Freeing unused kernel memory: 912K (ffff880001f1c000 - ffff880002000000) [ 2.353672] Freeing unused kernel memory: 1352K (ffff8800022ae000 - ffff880002400000) [ 2.407242] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 2.565528] loadkeys (1262) used greatest stack depth: 13872 bytes left [ 2.568269] init-early.sh (1260) used greatest stack depth: 12664 bytes left [ 2.600988] usb 1-4: New USB device found, idVendor=148f, idProduct=3070 [ 2.603894] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.606777] usb 1-4: Product: 802.11 n WLAN [ 2.609647] usb 1-4: Manufacturer: Ralink [ 2.609650] usb 1-4: SerialNumber: 1.0 [ 2.647168] usb 1-3.1: new full-speed USB device number 4 using xhci_hcd [ 2.708215] [drm:cherryview_enable_rps] GT fifo had a previous error 1080000 [ 2.712446] [drm:cherryview_enable_rps] GPLL enabled? yes [ 2.712454] [drm:cherryview_enable_rps] GPU status: 0x00002810 [ 2.712459] [drm:cherryview_enable_rps] current GPU freq: 400 MHz (40) [ 2.712462] [drm:cherryview_enable_rps] setting GPU freq to 400 MHz (40) [ 2.724615] usb 1-3.1: New USB device found, idVendor=04b3, idProduct=301b [ 2.727430] usb 1-3.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.730221] usb 1-3.1: Product: USB Productivity Option Keyboard( has the hub in # 1 ) [ 2.733071] usb 1-3.1: Manufacturer: Lite-On Technology [ 2.738459] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:04B3:301B.0001/input/input3 [ 2.795664] hid-generic 0003:04B3:301B.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:14.0-3.1/input0 [ 2.803104] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:04B3:301B.0002/input/input4 [ 2.826288] clocksource: Switched to clocksource tsc [ 2.860971] hid-generic 0003:04B3:301B.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:14.0-3.1/input1 [ 2.877401] usb 1-4: reset high-speed USB device number 3 using xhci_hcd [ 3.055487] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected [ 3.071050] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 3.071546] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 3.505069] udevd[1504]: starting version 3.1.5 [ 3.506919] random: udevd urandom read with 22 bits of entropy available [ 3.760273] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90001, key code 148): Invalid argument [ 3.760297] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90002, key code 152): Invalid argument [ 3.760314] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90003, key code 144): Invalid argument [ 3.760329] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90004, key code 421): Invalid argument [ 3.760345] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90005, key code 423): Invalid argument [ 3.760360] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90006, key code 140): Invalid argument [ 3.760375] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90007, key code 155): Invalid argument [ 3.760390] udevd[1544]: Error calling EVIOCSKEYCODE on device node '/dev/input/event3' (scan code 0x90008, key code 150): Invalid argument [ 4.244699] EXT4-fs (sda4): re-mounted. Opts: (null) [ 5.945659] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 5.948860] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 6.094272] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.354690] wlan0: authenticate with a2:f3:c1:bf:9e:dd [ 7.375246] wlan0: send auth to a2:f3:c1:bf:9e:dd (try 1/3) [ 7.378062] wlan0: authenticated [ 7.379132] wlan0: associate with a2:f3:c1:bf:9e:dd (try 1/3) [ 7.382570] wlan0: RX AssocResp from a2:f3:c1:bf:9e:dd (capab=0x431 status=0 aid=2) [ 7.386141] wlan0: associated [ 7.386212] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 15.496256] random: nonblocking pool is initialized