[ 0.000000] Linux version 4.7.0-rc4-drm-intel-nightly-ww26-commit-f586720+ (gfx@GM-GFX-QA02) (gcc version 4.9.3 (Ubuntu 4.9.3-8ubuntu2~14.04) ) #1 SMP Mon Jun 20 09:31:51 CDT 2016 [ 0.000000] Command line: vmlinuz root=/dev/sda2 initrd=initrd.img idle=halt log_buf_len=4M i915.preliminary_hw_support=1 drm.debug=0xe [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000012152000-0x0000000077ff8fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077ff9000-0x0000000079da8fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079da9000-0x0000000079e08fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079e09000-0x0000000079e38fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000079e39000-0x000000007ac2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ac2c000-0x000000007ac2cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ac2d000-0x000000007ac56fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ac57000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by EDK II [ 0.000000] efi: ACPI=0x79e38000 ACPI 2.0=0x79e38014 ESRT=0x79d74000 SMBIOS=0x7815a000 SMBIOS 3.0=0x78158000 PROP=0x7a06c920 [ 0.000000] efi: requested map not found. [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 0100000000 mask 7F00000000 write-back [ 0.000000] 4 base 0200000000 mask 7F00000000 write-back [ 0.000000] 5 base 0300000000 mask 7F00000000 write-back [ 0.000000] 6 base 0400000000 mask 7F80000000 write-back [ 0.000000] 7 base 00FF800000 mask 70FF800000 write-combining [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0223d000, 0x0223dfff] PGTABLE [ 0.000000] BRK [0x0223e000, 0x0223efff] PGTABLE [ 0.000000] BRK [0x0223f000, 0x0223ffff] PGTABLE [ 0.000000] BRK [0x02240000, 0x02240fff] PGTABLE [ 0.000000] BRK [0x02241000, 0x02241fff] PGTABLE [ 0.000000] BRK [0x02242000, 0x02242fff] PGTABLE [ 0.000000] log_buf_len: 4194304 bytes [ 0.000000] early log buf free: 257476(98%) [ 0.000000] RAMDISK: [mem 0x72947000-0x7481afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000079E38014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x0000000079E10188 0000DC (v01 INTEL EDK2 00000003 BRXT 01000013) [ 0.000000] ACPI: FACP 0x0000000079E30000 00010C (v05 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160422/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160422/tbfadt-708) [ 0.000000] ACPI: DSDT 0x0000000079E22000 008C82 (v02 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: FACS 0x0000000079DF7000 000040 [ 0.000000] ACPI: SSDT 0x0000000079E36000 0003C6 (v02 INTEL Tpm2Tabl 00001000 INTL 20150818) [ 0.000000] ACPI: TPM2 0x0000000079E35000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: UEFI 0x0000000079DFF000 000042 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: BDAT 0x0000000079E34000 000030 (v02 00000000 00000000) [ 0.000000] ACPI: DBG2 0x0000000079E33000 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: DBGP 0x0000000079E32000 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: HPET 0x0000000079E2F000 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: LPIT 0x0000000079E2E000 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: APIC 0x0000000079E2D000 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: MCFG 0x0000000079E2C000 00003C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: NPKT 0x0000000079E2B000 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E18000 004549 (v02 INTEL RVPRtd3 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E17000 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E15000 001659 (v01 Intel_ Platform 00001000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E14000 000400 (v02 PmRef Cpu0Ist 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E13000 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E12000 000356 (v02 PmRef Cpu0Tst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E11000 00017C (v02 PmRef ApTst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E0D000 0027E6 (v02 SaSsdt SaSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: FPDT 0x0000000079E37000 000044 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: WDAT 0x0000000079E31000 000104 (v01 00000000 00000000) [ 0.000000] ACPI: NHLT 0x0000000079E20000 001A50 (v00 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x47fbfa000-0x47fbfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000effffff] [ 0.000000] node 0: [mem 0x0000000012152000-0x0000000077ff8fff] [ 0.000000] node 0: [mem 0x0000000079e39000-0x000000007ac2bfff] [ 0.000000] node 0: [mem 0x000000007ac57000-0x000000007affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff] [ 0.000000] On node 0 totalpages: 4153311 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7490 pages used for memmap [ 0.000000] DMA32 zone: 479299 pages, LIFO batch:31 [ 0.000000] Normal zone: 57344 pages used for memmap [ 0.000000] Normal zone: 3670016 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff] [ 0.000000] PM: Registered nosave memory: [mem 0x77ff9000-0x79da8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79da9000-0x79e08fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79e09000-0x79e38fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac2c000-0x7ac2cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac2d000-0x7ac56fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff88047f800000 s103704 r8192 d31464 u524288 [ 0.000000] pcpu-alloc: s103704 r8192 d31464 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4088392 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vmlinuz root=/dev/sda2 initrd=initrd.img idle=halt log_buf_len=4M i915.preliminary_hw_support=1 drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16184936K/16613244K available (8204K kernel code, 1367K rwdata, 3736K rodata, 1528K init, 1400K bss, 428308K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4579.385 MHz processor [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 9158.77 BogoMIPS (lpj=18317540) [ 0.000032] pid_max: default: 32768 minimum: 301 [ 0.000037] ACPI: Core revision 20160422 [ 0.000319] Security Framework initialized [ 0.000322] Yama: becoming mindful. [ 0.000327] AppArmor: AppArmor initialized [ 0.000901] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003198] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004237] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004249] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004420] CPU: Physical Processor ID: 0 [ 0.004423] CPU: Processor Core ID: 0 [ 0.004431] mce: CPU supports 7 MCE banks [ 0.004442] CPU0: Thermal monitoring enabled (TM1) [ 0.004464] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.004466] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.005219] Freeing SMP alternatives memory: 32K (ffffffff820d5000 - ffffffff820dd000) [ 0.009210] ftrace: allocating 32243 entries in 126 pages [ 0.026486] smpboot: Max logical packages: 1 [ 0.026490] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.026824] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.028137] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067826] TSC deadline timer enabled [ 0.067828] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x9) [ 0.067834] Performance Events: PEBS fmt3+, 32-deep LBR, Goldmont events, full-width counters, Intel PMU driver. [ 0.067844] ... version: 4 [ 0.067846] ... bit width: 48 [ 0.067848] ... generic registers: 4 [ 0.067850] ... value mask: 0000ffffffffffff [ 0.067852] ... max period: 0000ffffffffffff [ 0.067853] ... fixed-purpose events: 3 [ 0.067855] ... event mask: 000000070000000f [ 0.068270] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.068344] x86: Booting SMP configuration: [ 0.068347] .... node #0, CPUs: #1 #2 #3 [ 0.309924] x86: Booted up 1 node, 4 CPUs [ 0.309929] smpboot: Total of 4 processors activated (36642.17 BogoMIPS) [ 0.310920] devtmpfs: initialized [ 0.310960] x86/mm: Memory block size: 128MB [ 0.313268] evm: security.selinux [ 0.313271] evm: security.SMACK64 [ 0.313273] evm: security.SMACK64EXEC [ 0.313274] evm: security.SMACK64TRANSMUTE [ 0.313276] evm: security.SMACK64MMAP [ 0.313278] evm: security.ima [ 0.313279] evm: security.capability [ 0.313329] PM: Registering ACPI NVS region [mem 0x79da9000-0x79e08fff] (393216 bytes) [ 0.313337] PM: Registering ACPI NVS region [mem 0x7ac2c000-0x7ac2cfff] (4096 bytes) [ 0.313372] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.313399] pinctrl core: initialized pinctrl subsystem [ 0.313483] RTC time: 19:02:26, date: 06/20/16 [ 0.314160] NET: Registered protocol family 16 [ 0.323899] cpuidle: using governor ladder [ 0.335903] cpuidle: using governor menu [ 0.335907] PCCT header not found. [ 0.335973] ACPI: bus type PCI registered [ 0.335976] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.336018] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.336022] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.336027] PCI: Using configuration type 1 for base access [ 0.352013] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.352017] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.352190] ACPI: Added _OSI(Module Device) [ 0.352193] ACPI: Added _OSI(Processor Device) [ 0.352195] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.352196] ACPI: Added _OSI(Processor Aggregator Device) [ 0.355305] ACPI: Executed 3 blocks of module-level executable AML code [ 0.356753] ACPI: Executed 2 blocks of module-level executable AML code [ 0.357568] ACPI: Executed 1 blocks of module-level executable AML code [ 0.359651] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.363405] ACPI: Dynamic OEM Table Load: [ 0.363413] ACPI: SSDT 0xFFFF88046CD69E00 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20150818) [ 0.363891] ACPI: Dynamic OEM Table Load: [ 0.363897] ACPI: SSDT 0xFFFF88046CE2E000 00015F (v02 PmRef ApIst 00003000 INTL 20150818) [ 0.364296] ACPI: Dynamic OEM Table Load: [ 0.364302] ACPI: SSDT 0xFFFF88046CD5B600 00008D (v02 PmRef ApCst 00003000 INTL 20150818) [ 0.365099] ACPI : EC: EC started [ 0.596094] ACPI: Interpreter enabled [ 0.596110] ACPI: (supports S0 S3 S4 S5) [ 0.596113] ACPI: Using IOAPIC for interrupt routing [ 0.596132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.597137] ACPI: Power Resource [PXP] (off) [ 0.597473] ACPI: Power Resource [PXP] (on) [ 0.616301] ACPI: Power Resource [PXP] (on) [ 0.636269] ACPI: Power Resource [PXP] (off) [ 0.636572] ACPI: Power Resource [PXP] (off) [ 0.636864] ACPI: Power Resource [PXP] (off) [ 0.637233] ACPI: Power Resource [SPPR] (on) [ 0.656141] ACPI: Power Resource [ODPR] (on) [ 0.656230] ACPI: Power Resource [SPPR] (off) [ 0.656405] ACPI: Power Resource [ODPR] (on) [ 0.656581] ACPI: Power Resource [UPPR] (on) [ 0.656731] ACPI: Power Resource [UPPR] (on) [ 0.656862] ACPI: Power Resource [UPPR] (on) [ 0.657094] ACPI: Power Resource [UPPR] (on) [ 0.657245] ACPI: Power Resource [UPPR] (on) [ 0.657372] ACPI: Power Resource [UPPR] (on) [ 0.657518] ACPI: Power Resource [USBC] (on) [ 0.657590] ACPI: Power Resource [SDPR] (on) [ 0.672253] ACPI: Power Resource [LSPR] (on) [ 0.673802] ACPI: Power Resource [PAUD] (on) [ 0.675571] ACPI: Power Resource [FN00] (on) [ 0.760351] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.760356] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.760796] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.760806] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.761125] PCI host bridge to bus 0000:00 [ 0.761128] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.761130] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.761133] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.761135] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.761138] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.761141] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.761144] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.761147] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] [ 0.761151] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] [ 0.761154] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] [ 0.761157] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window] [ 0.761160] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window] [ 0.761164] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window] [ 0.761167] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window] [ 0.761170] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window] [ 0.761173] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window] [ 0.761176] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window] [ 0.761180] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window] [ 0.761183] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window] [ 0.761187] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.761193] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000 [ 0.761342] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000 [ 0.761348] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.761352] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.761355] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.761492] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000 [ 0.761498] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit] [ 0.761643] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300 [ 0.761652] pci 0000:00:0e.0: reg 0x10: [mem 0x92310000-0x92313fff 64bit] [ 0.761661] pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit] [ 0.761686] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 0.761822] pci 0000:00:0e.0: System wakeup disabled by ACPI [ 0.761851] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000 [ 0.761862] pci 0000:00:0f.0: reg 0x10: [mem 0x92318000-0x92318fff 64bit] [ 0.761903] pci 0000:00:0f.0: PME# supported from D3hot [ 0.762026] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007 [ 0.762036] pci 0000:00:11.0: reg 0x10: [mem 0x92314000-0x92315fff 64bit] [ 0.762042] pci 0000:00:11.0: reg 0x18: [mem 0x9231b000-0x9231bfff 64bit] [ 0.762195] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601 [ 0.762203] pci 0000:00:12.0: reg 0x10: [mem 0x92316000-0x92317fff] [ 0.762206] pci 0000:00:12.0: reg 0x14: [mem 0x92342000-0x923420ff] [ 0.762210] pci 0000:00:12.0: reg 0x18: [io 0x2080-0x2087] [ 0.762213] pci 0000:00:12.0: reg 0x1c: [io 0x2088-0x208b] [ 0.762216] pci 0000:00:12.0: reg 0x20: [io 0x2060-0x207f] [ 0.762220] pci 0000:00:12.0: reg 0x24: [mem 0x92340000-0x923407ff] [ 0.762238] pci 0000:00:12.0: PME# supported from D3hot [ 0.762365] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400 [ 0.762399] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.762528] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.762572] pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400 [ 0.762612] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 0.762744] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.762779] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330 [ 0.762788] pci 0000:00:15.0: reg 0x10: [mem 0x92300000-0x9230ffff 64bit] [ 0.762820] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 0.762920] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.762954] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000 [ 0.762963] pci 0000:00:16.0: reg 0x10: [mem 0x9231c000-0x9231cfff 64bit] [ 0.762969] pci 0000:00:16.0: reg 0x18: [mem 0x9231d000-0x9231dfff 64bit] [ 0.763106] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000 [ 0.763116] pci 0000:00:16.1: reg 0x10: [mem 0x9231e000-0x9231efff 64bit] [ 0.763126] pci 0000:00:16.1: reg 0x18: [mem 0x9231f000-0x9231ffff 64bit] [ 0.763264] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000 [ 0.763273] pci 0000:00:16.2: reg 0x10: [mem 0x92320000-0x92320fff 64bit] [ 0.763279] pci 0000:00:16.2: reg 0x18: [mem 0x92321000-0x92321fff 64bit] [ 0.763416] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000 [ 0.763426] pci 0000:00:16.3: reg 0x10: [mem 0x92322000-0x92322fff 64bit] [ 0.763435] pci 0000:00:16.3: reg 0x18: [mem 0x92323000-0x92323fff 64bit] [ 0.763575] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000 [ 0.763585] pci 0000:00:17.0: reg 0x10: [mem 0x92324000-0x92324fff 64bit] [ 0.763591] pci 0000:00:17.0: reg 0x18: [mem 0x92325000-0x92325fff 64bit] [ 0.763732] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000 [ 0.763741] pci 0000:00:17.1: reg 0x10: [mem 0x92326000-0x92326fff 64bit] [ 0.763750] pci 0000:00:17.1: reg 0x18: [mem 0x92327000-0x92327fff 64bit] [ 0.763885] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000 [ 0.763894] pci 0000:00:17.2: reg 0x10: [mem 0x92328000-0x92328fff 64bit] [ 0.763900] pci 0000:00:17.2: reg 0x18: [mem 0x92329000-0x92329fff 64bit] [ 0.764036] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000 [ 0.764046] pci 0000:00:17.3: reg 0x10: [mem 0x9232a000-0x9232afff 64bit] [ 0.764051] pci 0000:00:17.3: reg 0x18: [mem 0x9232b000-0x9232bfff 64bit] [ 0.764202] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000 [ 0.764212] pci 0000:00:18.0: reg 0x10: [mem 0x9232c000-0x9232cfff 64bit] [ 0.764217] pci 0000:00:18.0: reg 0x18: [mem 0x9232d000-0x9232dfff 64bit] [ 0.764357] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000 [ 0.764366] pci 0000:00:18.1: reg 0x10: [mem 0x9232e000-0x9232efff 64bit] [ 0.764372] pci 0000:00:18.1: reg 0x18: [mem 0x9232f000-0x9232ffff 64bit] [ 0.764506] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000 [ 0.764515] pci 0000:00:18.2: reg 0x10: [mem 0x92330000-0x92330fff 64bit] [ 0.764521] pci 0000:00:18.2: reg 0x18: [mem 0x92331000-0x92331fff 64bit] [ 0.764655] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000 [ 0.764665] pci 0000:00:18.3: reg 0x10: [mem 0x92332000-0x92332fff 64bit] [ 0.764671] pci 0000:00:18.3: reg 0x18: [mem 0x92333000-0x92333fff 64bit] [ 0.764814] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000 [ 0.764824] pci 0000:00:19.0: reg 0x10: [mem 0x92334000-0x92334fff 64bit] [ 0.764829] pci 0000:00:19.0: reg 0x18: [mem 0x92335000-0x92335fff 64bit] [ 0.764964] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000 [ 0.764973] pci 0000:00:19.1: reg 0x10: [mem 0x92336000-0x92336fff 64bit] [ 0.764979] pci 0000:00:19.1: reg 0x18: [mem 0x92337000-0x92337fff 64bit] [ 0.765117] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000 [ 0.765128] pci 0000:00:19.2: reg 0x10: [mem 0x92338000-0x92338fff 64bit] [ 0.765134] pci 0000:00:19.2: reg 0x18: [mem 0x92339000-0x92339fff 64bit] [ 0.765276] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501 [ 0.765284] pci 0000:00:1b.0: reg 0x10: [mem 0x9233a000-0x9233afff 64bit] [ 0.765289] pci 0000:00:1b.0: reg 0x18: [mem 0x9233b000-0x9233bfff 64bit] [ 0.765437] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501 [ 0.765445] pci 0000:00:1c.0: reg 0x10: [mem 0x9233c000-0x9233cfff 64bit] [ 0.765450] pci 0000:00:1c.0: reg 0x18: [mem 0x9233d000-0x9233dfff 64bit] [ 0.765593] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501 [ 0.765601] pci 0000:00:1e.0: reg 0x10: [mem 0x9233e000-0x9233efff 64bit] [ 0.765606] pci 0000:00:1e.0: reg 0x18: [mem 0x9233f000-0x9233ffff 64bit] [ 0.765746] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100 [ 0.765902] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 [ 0.765917] pci 0000:00:1f.1: reg 0x10: [mem 0x92341000-0x923410ff 64bit] [ 0.765940] pci 0000:00:1f.1: reg 0x20: [io 0x2040-0x205f] [ 0.766128] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.766142] pci 0000:01:00.0: reg 0x10: [mem 0x92200000-0x9221ffff] [ 0.766155] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f] [ 0.766162] pci 0000:01:00.0: reg 0x1c: [mem 0x92220000-0x92223fff] [ 0.766217] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.766242] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.772145] pci 0000:00:13.0: PCI bridge to [bus 01] [ 0.772148] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 0.772150] pci 0000:00:13.0: bridge window [mem 0x92200000-0x922fffff] [ 0.772280] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.772363] pci 0000:02:00.0: reg 0x10: [mem 0x92100000-0x92101fff 64bit] [ 0.772470] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 0.772645] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.772779] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.780208] pci 0000:00:14.0: PCI bridge to [bus 02] [ 0.780216] pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff] [ 0.781550] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.781590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.781630] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.781670] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.781709] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.781747] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.781786] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.781828] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.782278] ACPI: Enabled 2 GPEs in block 00 to 7F [ 0.782289] ACPI : EC: EC stopped [ 0.782340] ACPI : EC: GPE = 0x2b, I/O: command/status = 0x66, data = 0x62 [ 0.782342] ACPI : EC: EC started [ 1.012367] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.012371] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.012377] vgaarb: loaded [ 1.012378] vgaarb: bridge control possible 0000:00:02.0 [ 1.012493] SCSI subsystem initialized [ 1.012528] libata version 3.00 loaded. [ 1.012543] ACPI: bus type USB registered [ 1.012556] usbcore: registered new interface driver usbfs [ 1.012563] usbcore: registered new interface driver hub [ 1.012576] usbcore: registered new device driver usb [ 1.012675] PCI: Using ACPI for IRQ routing [ 1.014452] PCI: pci_cache_line_size set to 64 bytes [ 1.014593] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 1.014594] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 1.014595] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff] [ 1.014596] e820: reserve RAM buffer [mem 0x77ff9000-0x77ffffff] [ 1.014597] e820: reserve RAM buffer [mem 0x7ac2c000-0x7bffffff] [ 1.014598] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 1.014660] NetLabel: Initializing [ 1.014663] NetLabel: domain hash size = 128 [ 1.014665] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.014672] NetLabel: unlabeled traffic allowed by default [ 1.014758] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.014764] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 1.015263] clocksource: Switched to clocksource hpet [ 1.018854] VFS: Disk quotas dquot_6.6.0 [ 1.018868] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.018909] AppArmor: AppArmor Filesystem Enabled [ 1.018940] pnp: PnP ACPI init [ 1.019033] system 00:00: [io 0x06a4] has been reserved [ 1.019036] system 00:00: [io 0x06a0] has been reserved [ 1.019040] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.019104] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io 0x1000-0x1fff] [ 1.019127] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.019130] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.019132] system 00:01: [io 0x0500-0x05fe] has been reserved [ 1.019134] system 00:01: [io 0x0600-0x061f] has been reserved [ 1.019138] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.019177] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.019433] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.019437] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved [ 1.019439] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.019442] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.019444] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved [ 1.019447] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved [ 1.019449] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved [ 1.019452] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.019454] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.019458] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.019583] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.019666] pnp: PnP ACPI: found 5 devices [ 1.026110] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.026133] pci 0000:00:13.0: PCI bridge to [bus 01] [ 1.026136] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 1.026140] pci 0000:00:13.0: bridge window [mem 0x92200000-0x922fffff] [ 1.026144] pci 0000:00:14.0: PCI bridge to [bus 02] [ 1.026151] pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff] [ 1.026160] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.026161] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.026162] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.026164] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.026165] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.026166] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.026167] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 1.026168] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window] [ 1.026169] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window] [ 1.026170] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window] [ 1.026171] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window] [ 1.026172] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window] [ 1.026173] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window] [ 1.026174] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window] [ 1.026175] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window] [ 1.026176] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window] [ 1.026178] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window] [ 1.026179] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window] [ 1.026180] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window] [ 1.026181] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.026182] pci_bus 0000:01: resource 1 [mem 0x92200000-0x922fffff] [ 1.026183] pci_bus 0000:02: resource 1 [mem 0x92100000-0x921fffff] [ 1.026198] NET: Registered protocol family 2 [ 1.026312] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.026545] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.026716] TCP: Hash tables configured (established 131072 bind 65536) [ 1.026742] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.026813] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.026898] NET: Registered protocol family 1 [ 1.026909] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.027114] PCI: CLS 64 bytes, default 64 [ 1.027144] Trying to unpack rootfs image as initramfs... [ 1.337350] Freeing initrd memory: 31568K (ffff880072947000 - ffff88007481b000) [ 1.337355] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.337358] software IO TLB [mem 0x6e947000-0x72947000] (64MB) mapped at [ffff88006e947000-ffff880072946fff] [ 1.337455] Scanning for low memory corruption every 60 seconds [ 1.337675] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.337689] audit: initializing netlink subsys (disabled) [ 1.337698] audit: type=2000 audit(1466449346.527:1): initialized [ 1.337893] Initialise system trusted keyrings [ 1.337965] workingset: timestamp_bits=38 max_order=22 bucket_order=0 [ 1.339018] zbud: loaded [ 1.339381] fuse init (API version 7.24) [ 1.339477] Key type big_key registered [ 1.339896] Key type asymmetric registered [ 1.339899] Asymmetric key parser 'x509' registered [ 1.339923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.339955] io scheduler noop registered [ 1.339958] io scheduler deadline registered (default) [ 1.339978] io scheduler cfq registered [ 1.340089] pcieport 0000:00:13.0: can't derive routing for PCI INT C [ 1.340092] pcieport 0000:00:13.0: PCI INT C: not connected [ 1.340185] pcieport 0000:00:14.0: can't derive routing for PCI INT B [ 1.340188] pcieport 0000:00:14.0: PCI INT B: not connected [ 1.340257] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt [ 1.340260] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.340263] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded [ 1.340278] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt [ 1.340280] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.340287] pcie_pme 0000:00:14.0:pcie001: service driver pcie_pme loaded [ 1.340290] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.340295] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.340315] efifb: probing for efifb [ 1.340326] efifb: framebuffer at 0x80000000, using 8100k, total 8100k [ 1.340328] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.340330] efifb: scrolling: redraw [ 1.340332] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.343931] Console: switching to colour frame buffer device 240x67 [ 1.347460] fb0: EFI VGA frame buffer device [ 1.347518] ACPI: AC Adapter [ADP1] (off-line) [ 1.347566] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0 [ 1.347697] ACPI: Lid Switch [LID0] [ 1.347739] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.347762] ACPI: Power Button [PWRB] [ 1.347796] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.347816] ACPI: Power Button [PWRF] [ 1.350949] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.350971] ACPI: Thermal Zone [TZ01] (30 C) [ 1.351002] GHES: HEST is not enabled! [ 1.351075] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.351083] ACPI: Battery Slot [BAT0] (battery present) [ 1.351104] ACPI: Battery Slot [BAT1] (battery absent) [ 1.371189] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.372279] Linux agpgart interface v0.103 [ 1.374261] brd: module loaded [ 1.375102] loop: module loaded [ 1.375236] libphy: Fixed MDIO Bus: probed [ 1.375251] tun: Universal TUN/TAP device driver, 1.6 [ 1.375265] tun: (C) 1999-2004 Max Krasnyansky [ 1.375311] PPP generic driver version 2.4.2 [ 1.375358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.375381] ehci-pci: EHCI PCI platform driver [ 1.375398] ehci-platform: EHCI generic platform driver [ 1.375418] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.375440] ohci-pci: OHCI PCI platform driver [ 1.375457] ohci-platform: OHCI generic platform driver [ 1.375475] uhci_hcd: USB Universal Host Controller Interface driver [ 1.375584] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.375602] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 1.376652] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.376681] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported [ 1.376725] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.376747] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.376766] usb usb1: Product: xHCI Host Controller [ 1.376780] usb usb1: Manufacturer: Linux 4.7.0-rc4-drm-intel-nightly-ww26-commit-f586720+ xhci-hcd [ 1.376807] usb usb1: SerialNumber: 0000:00:15.0 [ 1.376894] hub 1-0:1.0: USB hub found [ 1.376911] hub 1-0:1.0: 8 ports detected [ 1.377344] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.377365] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 1.377403] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.378244] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.379102] usb usb2: Product: xHCI Host Controller [ 1.379953] usb usb2: Manufacturer: Linux 4.7.0-rc4-drm-intel-nightly-ww26-commit-f586720+ xhci-hcd [ 1.380835] usb usb2: SerialNumber: 0000:00:15.0 [ 1.381772] hub 2-0:1.0: USB hub found [ 1.382622] hub 2-0:1.0: 7 ports detected [ 1.383891] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.384764] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.385954] i8042: Warning: Keylock active [ 1.386963] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.387914] mousedev: PS/2 mouse device common for all mice [ 1.388932] rtc_cmos 00:04: RTC can wake from S4 [ 1.389941] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.390859] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.391762] i2c /dev entries driver [ 1.392687] device-mapper: uevent: version 1.0.3 [ 1.393623] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.394527] ledtrig-cpu: registered to indicate activity on CPUs [ 1.395426] EFI Variables Facility v0.08 2004-May-17 [ 1.399593] NET: Registered protocol family 10 [ 1.400621] NET: Registered protocol family 17 [ 1.401511] Key type dns_resolver registered [ 1.402538] microcode: CPU0 sig=0x506c9, pf=0x1, revision=0xe [ 1.403429] microcode: CPU1 sig=0x506c9, pf=0x1, revision=0xe [ 1.404318] microcode: CPU2 sig=0x506c9, pf=0x1, revision=0xe [ 1.405182] microcode: CPU3 sig=0x506c9, pf=0x1, revision=0xe [ 1.406059] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.407058] registered taskstats version 1 [ 1.407895] Loading compiled-in X.509 certificates [ 1.410485] Loaded X.509 cert 'Build time autogenerated kernel key: 66f5b6abeb459cef6c982aff408c5b6aa528bc63' [ 1.411341] zswap: loaded using pool lzo/zbud [ 1.414277] Key type trusted registered [ 1.417357] Key type encrypted registered [ 1.418177] AppArmor: AppArmor sha1 policy hashing enabled [ 1.419007] ima: No TPM chip found, activating TPM-bypass! [ 1.419855] evm: HMAC attrs: 0x1 [ 1.421033] Magic number: 4:480:41 [ 1.421847] bdi 7:6: hash matches [ 1.422694] memory memory77: hash matches [ 1.423575] rtc_cmos 00:04: setting system clock to 2016-06-20 19:02:30 UTC (1466449350) [ 1.424735] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.425564] EDD information not available. [ 1.426423] PM: Hibernation image not present or could not be loaded. [ 1.427092] Freeing unused kernel memory: 1528K (ffffffff81f57000 - ffffffff820d5000) [ 1.427943] Write protecting the kernel read-only data: 14336k [ 1.429115] Freeing unused kernel memory: 2020K (ffff880001807000 - ffff880001a00000) [ 1.430564] Freeing unused kernel memory: 360K (ffff880001da6000 - ffff880001e00000) [ 1.439716] random: systemd-udevd urandom read with 5 bits of entropy available [ 1.445374] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 1.456253] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.480734] hidraw: raw HID events driver (C) Jiri Kosina [ 1.487790] ahci 0000:00:12.0: version 3.0 [ 1.487886] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.488785] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 1.489855] scsi host0: ahci [ 1.490814] ata1: SATA max UDMA/133 abar m2048@0x92340000 port 0x92340100 irq 123 [ 1.490848] [drm] Initialized drm 1.1.0 20060810 [ 1.491904] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.491905] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.491905] usb 1-2: Product: USB2.0 Hub [ 1.492056] hub 1-2:1.0: USB hub found [ 1.492125] hub 1-2:1.0: 4 ports detected [ 1.497089] pps_core: LinuxPPS API ver. 1 registered [ 1.497094] sdhci: Secure Digital Host Controller Interface driver [ 1.497094] sdhci: Copyright(c) Pierre Ossman [ 1.499735] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.500729] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev a) [ 1.501711] sdhci-pci 0000:00:1b.0: failed to setup card detect gpio [ 1.501731] PTP clock support registered [ 1.504299] dca service started, version 1.12.1 [ 1.507577] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit [ 1.508485] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev a) [ 1.508521] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.508521] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.515057] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 1.515322] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 1.515332] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev a) [ 1.517750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.519478] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit [ 1.520987] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 1.522978] pps pps0: new PPS source ptp0 [ 1.523893] igb 0000:01:00.0: added PHC on eth0 [ 1.524794] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.525691] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:40 [ 1.526586] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.527476] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 1.528583] Setting dangerous option preliminary_hw_support - tainting kernel [ 1.530057] [drm:intel_detect_pch] No PCH found. [ 1.530059] [drm:get_allowed_dc_mask] Allowed DC state mask 09 [ 1.530069] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x5a84 rev=0x0a flags=need_gfx_hws,is_broxton,is_preliminary,has_fbc,has_hotplug,has_ddi,has_fpga_dbg, [ 1.530147] [drm:intel_device_info_runtime_init] slice total: 1 [ 1.530148] [drm:intel_device_info_runtime_init] subslice total: 3 [ 1.530148] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 1.530149] [drm:intel_device_info_runtime_init] EU total: 18 [ 1.530150] [drm:intel_device_info_runtime_init] EU per subslice: 6 [ 1.530150] [drm:intel_device_info_runtime_init] Has Pooled EU: y [ 1.530151] [drm:intel_device_info_runtime_init] Min EU in pool: 9 [ 1.530152] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.530153] [drm:intel_device_info_runtime_init] has subslice power gating: y [ 1.530153] [drm:intel_device_info_runtime_init] has EU power gating: y [ 1.530154] [drm:intel_device_info_runtime_init] ppgtt mode: 3 [ 1.530177] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.530178] [drm] Memory usable by graphics device = 4096M [ 1.531098] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 1.531099] [drm:i915_ggtt_init_hw] GTT stolen size = 64M [ 1.531100] checking generic (80000000 7e9000) vs hw (80000000 10000000) [ 1.531101] fb: switching to inteldrmfb from EFI VGA [ 1.532026] Console: switching to colour dummy device 80x25 [ 1.532074] [drm] Replacing VGA console driver [ 1.532100] [drm:intel_opregion_setup] graphic opregion physical addr: 0x79df2018 [ 1.532104] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.532104] [drm:intel_opregion_setup] ASLE supported [ 1.532107] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA) [ 1.532127] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.532129] [drm] Driver supports precise vblank timestamp query. [ 1.532132] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 1.532133] [drm:intel_bios_init] VBT signature "$VBT BROXTON ", BDB version 207 [ 1.532134] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 1.532135] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.532136] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [ 1.532137] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [ 1.532138] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.532139] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.532140] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.532141] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 1.532142] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180 [ 1.532143] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 1.532144] [drm:parse_device_mapping] Expected child device config size for VBT version 207 not known; assuming 38 [ 1.532145] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.532147] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.532148] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.532149] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.532150] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8 [ 1.532151] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.532152] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8 [ 1.532172] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.532176] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.532177] [drm:intel_power_well_enable] enabling power well 1 [ 1.532180] [drm:intel_update_cdclk] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz [ 1.532192] [drm:intel_power_well_enable] enabling always-on [ 1.532193] [drm:intel_power_well_enable] enabling DC off [ 1.532194] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.532196] [drm:intel_power_well_enable] enabling power well 2 [ 1.532197] [drm:intel_power_well_enable] enabling dpio-common-a [ 1.532204] [drm:bxt_ddi_phy_init] DDI PHY 1 already enabled, won't reprogram it [ 1.532204] [drm:intel_power_well_enable] enabling dpio-common-bc [ 1.533347] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.533363] [drm:bxt_ddi_phy_init] DDI PHY 1 already enabled, won't reprogram it [ 1.533373] [drm:bxt_ddi_phy_init] DDI PHY 0 already enabled, won't reprogram it [ 1.533375] [drm:intel_csr_ucode_init] Loading i915/bxt_dmc_ver1.bin [ 1.533482] [drm] Finished loading i915/bxt_dmc_ver1.bin (v1.7) [ 1.537703] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 9 (9.0 usec) [ 1.537705] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 9 (9.0 usec) [ 1.537706] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 10 (10.0 usec) [ 1.537707] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 24 (24.0 usec) [ 1.537708] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 24 (24.0 usec) [ 1.537708] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 24 (24.0 usec) [ 1.537709] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 24 (24.0 usec) [ 1.537710] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 24 (24.0 usec) [ 1.537711] [drm:intel_modeset_init] 3 display pipes available. [ 1.537723] [drm:intel_update_cdclk] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz [ 1.537724] [drm:intel_update_max_cdclk] Max CD clock rate: 624000 kHz [ 1.537725] [drm:intel_update_max_cdclk] Max dotclock rate: 624000 kHz [ 1.537727] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.538032] [drm:intel_ddi_init] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing [ 1.538033] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.538061] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000 [ 1.538062] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.538063] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 1.538064] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.538065] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1 [ 1.538106] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.538108] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f [ 1.538477] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.539052] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.539414] [drm:intel_dp_get_dpcd] EDP DPCD : 02 fb c7 [ 1.539415] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.539417] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.539418] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.539419] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.539421] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 [ 1.543417] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.543419] [drm:intel_dp_drrs_init] Downclock mode is not found. DRRS not supported [ 1.543422] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 67764/96000 [ 1.543430] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.543457] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 [ 1.543504] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 1.543527] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.543545] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2 [ 1.543585] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 1.543605] [drm:intel_dsi_init] [ 1.543616] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 1.543622] [drm:intel_modeset_readout_hw_state] [CRTC:31:pipe B] hw state readout: disabled [ 1.543624] [drm:intel_modeset_readout_hw_state] [CRTC:36:pipe C] hw state readout: disabled [ 1.543629] [drm:intel_modeset_readout_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000001, on 1 [ 1.543630] [drm:intel_modeset_readout_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0 [ 1.543632] [drm:intel_modeset_readout_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0 [ 1.543635] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.543638] [drm:intel_modeset_readout_hw_state] [ENCODER:38:DDI A] hw state readout: enabled, pipe A [ 1.543640] [drm:intel_modeset_readout_hw_state] [ENCODER:46:DDI B] hw state readout: disabled, pipe A [ 1.543641] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP-MST A] hw state readout: disabled, pipe A [ 1.543641] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP-MST B] hw state readout: disabled, pipe B [ 1.543642] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP-MST C] hw state readout: disabled, pipe C [ 1.543644] [drm:intel_modeset_readout_hw_state] [ENCODER:53:DDI C] hw state readout: disabled, pipe A [ 1.543644] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP-MST A] hw state readout: disabled, pipe A [ 1.543645] [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP-MST B] hw state readout: disabled, pipe B [ 1.543646] [drm:intel_modeset_readout_hw_state] [ENCODER:57:DP-MST C] hw state readout: disabled, pipe C [ 1.543648] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:eDP-1] hw state readout: enabled [ 1.543649] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-1] hw state readout: disabled [ 1.543651] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled [ 1.543652] [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:DP-2] hw state readout: disabled [ 1.543653] [drm:intel_modeset_readout_hw_state] [CONNECTOR:58:HDMI-A-2] hw state readout: disabled [ 1.543662] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff880467586000 for pipe A [ 1.543663] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1.543663] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.543664] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.543666] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 1.543667] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.543668] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.543668] [drm:intel_dump_pipe_config] requested mode: [ 1.543670] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa [ 1.543671] [drm:intel_dump_pipe_config] adjusted mode: [ 1.543672] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa [ 1.543673] [drm:intel_dump_crtc_timings] crtc timings: 138119 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x40 flags: 0xa [ 1.543674] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.543675] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.543676] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.543677] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.543677] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.543678] [drm:intel_dump_pipe_config] ips: 0 [ 1.543679] [drm:intel_dump_pipe_config] double wide: 0 [ 1.543680] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 1.543681] [drm:intel_dump_pipe_config] planes on this crtc [ 1.543682] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] disabled, scaler_id = -1 [ 1.543683] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 1.543684] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 1.543685] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 1.543686] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][setup_hw_state] config ffff880467587000 for pipe B [ 1.543687] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.543687] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.543688] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.543689] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.543690] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.543691] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.543692] [drm:intel_dump_pipe_config] requested mode: [ 1.543693] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.543694] [drm:intel_dump_pipe_config] adjusted mode: [ 1.543695] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.543696] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.543697] [drm:intel_dump_pipe_config] port clock: 0 [ 1.543698] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.543698] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.543699] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.543700] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.543701] [drm:intel_dump_pipe_config] ips: 0 [ 1.543701] [drm:intel_dump_pipe_config] double wide: 0 [ 1.543703] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.543703] [drm:intel_dump_pipe_config] planes on this crtc [ 1.543704] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] disabled, scaler_id = -1 [ 1.543705] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 1.543706] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 1.543707] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 1.543708] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][setup_hw_state] config ffff880466898000 for pipe C [ 1.543709] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.543709] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.543710] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.543711] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.543712] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.543713] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.543714] [drm:intel_dump_pipe_config] requested mode: [ 1.543715] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.543716] [drm:intel_dump_pipe_config] adjusted mode: [ 1.543717] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.543718] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.543719] [drm:intel_dump_pipe_config] port clock: 0 [ 1.543720] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.543720] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.543721] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.543722] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.543723] [drm:intel_dump_pipe_config] ips: 0 [ 1.543724] [drm:intel_dump_pipe_config] double wide: 0 [ 1.543725] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.543726] [drm:intel_dump_pipe_config] planes on this crtc [ 1.543727] [drm:intel_dump_pipe_config] [PLANE:34:plane 1C] disabled, scaler_id = -1 [ 1.543727] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = -1 [ 1.543728] [drm:intel_dump_pipe_config] [PLANE:37:plane 2C] disabled, scaler_id = -1 [ 1.543749] [drm:intel_power_well_disable] disabling dpio-common-bc [ 1.543750] [drm:intel_power_well_disable] disabling power well 2 [ 1.543753] [drm:skl_set_power_well] Disabling power well 2 [ 1.543757] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.543758] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.543761] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.543763] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880466e54000 [ 1.543764] [drm:intel_guc_init] GuC firmware pending, path i915/bxt_guc_ver8_7.bin [ 1.543765] [drm:guc_fw_fetch] before requesting firmware: GuC fw fetch status PENDING [ 1.543796] [drm:guc_fw_fetch] fetch GuC fw from i915/bxt_guc_ver8_7.bin succeeded, fw ffff8804675e5300 [ 1.543798] [drm:guc_fw_fetch] firmware version 8.7 OK (minimum 8.7) [ 1.543831] [drm:guc_fw_fetch] GuC fw fetch status SUCCESS, obj ffff880466e54240 [ 1.543901] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.543902] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.545491] [drm:i915_gem_context_init] LR context support initialized [ 1.545498] [drm:intel_init_pipe_control] render ring pipe control offset: 0x007ea000 [ 1.545503] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.545505] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=16384 [ 1.545526] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.545527] [drm:i915_pages_create_for_stolen] offset=0x7ed000, size=16384 [ 1.545534] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.545535] [drm:i915_pages_create_for_stolen] offset=0x7f1000, size=16384 [ 1.545541] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.545542] [drm:i915_pages_create_for_stolen] offset=0x7f5000, size=16384 [ 1.545550] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1.545571] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1.545588] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1.545609] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1.545625] [drm:intel_guc_setup] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load NONE [ 1.545627] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load PENDING [ 1.547746] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x8002f0ec [ 1.547747] [drm:guc_ucode_xfer_dma] returning 0 [ 1.547749] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load SUCCESS [ 1.547762] [drm:select_doorbell_register] assigned normal priority doorbell id 0x0 [ 1.547763] [drm:select_doorbell_cacheline] selected doorbell cacheline 0x0, next 0x40, linesize 64 [ 1.547775] [drm:guc_client_alloc] new priority 2 client ffff880466a4e000: ctx_index 0 [ 1.547776] [drm:guc_client_alloc] doorbell id 0, cacheline offset 0x0 [ 1.550758] [drm:intel_update_cdclk] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz [ 1.550792] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.550794] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 1.550795] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 1.550795] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 1.550796] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 1.550797] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400 [ 1.550798] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400) [ 1.550799] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 1.550800] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 1.550801] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 1.550804] [drm:bxt_hpd_irq_setup] Invert bit setting: hp_ctl:18001818 hp_port:38 [ 1.550811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.550813] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.551049] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 1.552879] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.553861] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.554014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.554919] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.556998] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] status updated from unknown to connected [ 1.557006] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.557008] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.557010] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.557011] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.557011] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.557013] [drm:intel_power_well_enable] enabling power well 2 [ 1.557014] [drm:skl_set_power_well] Enabling power well 2 [ 1.557017] [drm:intel_power_well_enable] enabling dpio-common-bc [ 1.559076] [drm:intel_power_well_disable] disabling dpio-common-bc [ 1.559078] [drm:intel_power_well_disable] disabling power well 2 [ 1.559081] [drm:skl_set_power_well] Disabling power well 2 [ 1.559083] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] status updated from unknown to disconnected [ 1.559085] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] disconnected [ 1.559086] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.559087] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.559088] [drm:intel_power_well_enable] enabling power well 2 [ 1.559089] [drm:skl_set_power_well] Enabling power well 2 [ 1.561596] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a [ 1.561600] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.563977] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 1.576199] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x420257c1495, max_idle_ns: 440795299558 ns [ 1.579659] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd [ 1.600196] [drm:intel_hdmi_detect] HDMI live status down [ 1.600198] [drm:intel_power_well_disable] disabling power well 2 [ 1.600201] [drm:skl_set_power_well] Disabling power well 2 [ 1.600207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected [ 1.600208] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.600209] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.600210] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.600212] [drm:intel_power_well_enable] enabling power well 2 [ 1.600213] [drm:skl_set_power_well] Enabling power well 2 [ 1.600216] [drm:intel_power_well_enable] enabling dpio-common-bc [ 1.600238] [drm:intel_power_well_disable] disabling dpio-common-bc [ 1.600239] [drm:intel_power_well_disable] disabling power well 2 [ 1.600242] [drm:skl_set_power_well] Disabling power well 2 [ 1.600243] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] status updated from unknown to disconnected [ 1.600244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] disconnected [ 1.600245] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.600246] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.600247] [drm:intel_power_well_enable] enabling power well 2 [ 1.600248] [drm:skl_set_power_well] Enabling power well 2 [ 1.611900] usb 1-2.1: New USB device found, idVendor=04b3, idProduct=310c [ 1.611903] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.611906] usb 1-2.1: Product: USB Optical Mouse [ 1.615169] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.617802] mmc1: new HS400 MMC card at address 0001 [ 1.618654] ata1.00: ATA-9: INTEL SSDSC2BW080A4, DC22, max UDMA/133 [ 1.618657] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.620393] mmcblk1: mmc1:0001 CGND3R 58.2 GiB [ 1.620471] mmcblk1boot0: mmc1:0001 CGND3R partition 1 4.00 MiB [ 1.620531] mmcblk1boot1: mmc1:0001 CGND3R partition 2 4.00 MiB [ 1.620598] mmcblk1rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB [ 1.621139] mmcblk1: p1 p2 p3 p4 [ 1.624960] ata1.00: configured for UDMA/133 [ 1.625059] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW08 DC22 PQ: 0 ANSI: 5 [ 1.633633] usb 1-2.2: new low-speed USB device number 5 using xhci_hcd [ 1.641267] [drm:intel_hdmi_detect] HDMI live status down [ 1.641270] [drm:intel_power_well_disable] disabling power well 2 [ 1.641273] [drm:skl_set_power_well] Disabling power well 2 [ 1.641275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] status updated from unknown to disconnected [ 1.641280] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.641283] [drm:drm_setup_crtcs] [ 1.641284] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.641285] [drm:drm_enable_connectors] connector 47 enabled? no [ 1.641286] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.641287] [drm:drm_enable_connectors] connector 54 enabled? no [ 1.641288] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.641289] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.641290] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.641291] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 1.641292] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.641293] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.641294] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.641294] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.641296] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.641298] [drm:intelfb_create] re-using BIOS fb [ 1.641302] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff880466e54000 [ 1.641303] [drm] Initialized i915 1.6.0 20160620 for 0000:00:02.0 on minor 0 [ 1.641339] [drm:drm_fb_helper_hotplug_event] [ 1.641340] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.641341] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.641341] fbcon: inteldrmfb (fb0) is primary device [ 1.644195] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.645505] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.647571] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.647573] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.647574] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.647575] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.647576] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.647576] [drm:intel_power_well_enable] enabling power well 2 [ 1.647577] [drm:skl_set_power_well] Enabling power well 2 [ 1.647688] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.647745] sd 0:0:0:0: [sda] Write Protect is off [ 1.647746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.647764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.648103] [drm:intel_power_well_enable] enabling dpio-common-bc [ 1.648127] [drm:intel_power_well_disable] disabling dpio-common-bc [ 1.648131] [drm:intel_power_well_disable] disabling power well 2 [ 1.648133] [drm:skl_set_power_well] Disabling power well 2 [ 1.648135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] disconnected [ 1.648136] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.648136] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.648137] [drm:intel_power_well_enable] enabling power well 2 [ 1.648137] [drm:skl_set_power_well] Enabling power well 2 [ 1.649682] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.653912] sda: sda1 sda2 sda3 [ 1.654151] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.661267] usb 1-2.2: New USB device found, idVendor=03f0, idProduct=0024 [ 1.661268] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.661269] usb 1-2.2: Product: HP Basic USB Keyboard [ 1.661269] usb 1-2.2: Manufacturer: CHICONY [ 1.696609] usb 1-2.3: new high-speed USB device number 6 using xhci_hcd [ 1.705478] [drm:intel_hdmi_detect] HDMI live status down [ 1.705479] [drm:intel_power_well_disable] disabling power well 2 [ 1.705482] [drm:skl_set_power_well] Disabling power well 2 [ 1.705483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.705484] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.705485] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.705486] [drm:intel_power_well_enable] enabling power well 2 [ 1.705487] [drm:skl_set_power_well] Enabling power well 2 [ 1.707496] [drm:intel_power_well_enable] enabling dpio-common-bc [ 1.707518] [drm:intel_power_well_disable] disabling dpio-common-bc [ 1.707519] [drm:intel_power_well_disable] disabling power well 2 [ 1.707521] [drm:skl_set_power_well] Disabling power well 2 [ 1.707522] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] disconnected [ 1.707523] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.707523] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.707524] [drm:intel_power_well_enable] enabling power well 2 [ 1.707524] [drm:skl_set_power_well] Enabling power well 2 [ 1.770754] [drm:intel_hdmi_detect] HDMI live status down [ 1.770755] [drm:intel_power_well_disable] disabling power well 2 [ 1.770757] [drm:skl_set_power_well] Disabling power well 2 [ 1.770758] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.770762] [drm:drm_setup_crtcs] [ 1.770763] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.770763] [drm:drm_enable_connectors] connector 47 enabled? no [ 1.770764] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.770764] [drm:drm_enable_connectors] connector 54 enabled? no [ 1.770764] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.770766] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.770766] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.770767] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 1.770767] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 1.770768] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.770768] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 1.770768] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.770769] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.770780] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 1.770781] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.770783] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 1.770783] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 1.770786] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 1.770786] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 1.770787] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.770788] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff8804669a2800 for pipe A [ 1.770788] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1.770789] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.770789] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.770790] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 1.770791] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.770791] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.770792] [drm:intel_dump_pipe_config] requested mode: [ 1.770793] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.770793] [drm:intel_dump_pipe_config] adjusted mode: [ 1.770794] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.770795] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 1.770795] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.770796] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.770796] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.770797] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.770797] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.770798] [drm:intel_dump_pipe_config] ips: 0 [ 1.770798] [drm:intel_dump_pipe_config] double wide: 0 [ 1.770799] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 1.770800] [drm:intel_dump_pipe_config] planes on this crtc [ 1.770801] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 1.770802] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 1.770802] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 1.770803] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 1.770803] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 1.770803] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 1.770805] [drm:intel_modeset_checks] New cdclk calculated to be atomic 144000, actual 144000 [ 1.770807] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 1.770808] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL A [ 1.770808] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 1.770809] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 1.770820] [drm:intel_edp_backlight_off] [ 1.775966] usb 1-2.3: New USB device found, idVendor=0b95, idProduct=7720 [ 1.775967] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.775968] usb 1-2.3: Product: AX88772 [ 1.775969] usb 1-2.3: SerialNumber: 00D92D [ 1.783730] usbcore: registered new interface driver usbhid [ 1.783731] usbhid: USB HID core driver [ 1.784899] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:04B3:310C.0001/input/input5 [ 1.784980] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:15.0-2.1/input0 [ 1.785066] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:0024.0002/input/input6 [ 1.798010] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:15.0-2.2/input0 [ 1.823072] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large: [ 1.823072] clocksource: 'hpet' wd_now: 8db5abd wd_last: 840515a mask: ffffffff [ 1.823073] clocksource: 'tsc' cs_now: a69b864e4 cs_last: a473350ca mask: ffffffffffffffff [ 1.823078] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.823086] [drm:intel_disable_pipe] disabling pipe A [ 1.825145] [drm:edp_panel_off] Turn eDP port A panel power off [ 1.825147] [drm:wait_panel_off] Wait for panel power off time [ 1.825149] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000060 [ 1.837809] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 1.837810] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 1.837811] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 1.837823] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 1.854602] [drm:wait_panel_status] Wait complete [ 1.854604] [drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 26 [ 1.854609] [drm:intel_disable_shared_dpll] disabling PORT PLL A [ 1.854612] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 1.854612] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 1.854613] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 1.854613] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 1.854614] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 1.854614] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 1.854615] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 1.854615] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 1.854616] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 1.854616] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 1.854617] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 1.854617] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 1.854618] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 1.854618] [drm:verify_single_dpll_state] PORT PLL A [ 1.854619] [drm:verify_single_dpll_state] PORT PLL B [ 1.854619] [drm:verify_single_dpll_state] PORT PLL C [ 1.854624] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 1.854624] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 1.854645] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.854646] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.970341] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000060 [ 1.970419] [drm] RC6 on [ 1.983977] [drm:wait_panel_status] Wait complete [ 1.983978] [drm:wait_panel_on] Wait for panel power on [ 1.983979] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000063 [ 2.009674] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 2.009675] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 2.009675] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1 [ 2.009688] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 2.043996] [drm:wait_panel_status] Wait complete [ 2.043999] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 2.044000] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 2.044725] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 2.044726] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 2.044960] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 2.045495] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 2.045539] [drm:skylake_pfit_enable] for crtc_state = ffff8804669a2800 [ 2.045599] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 2.045600] [drm:intel_enable_pipe] enabling pipe A [ 2.045607] [drm:intel_edp_backlight_on] [ 2.045608] [drm:intel_panel_enable_backlight] pipe A [ 2.045609] [drm:intel_panel_actually_set_backlight] set backlight PWM = 67764 [ 2.046481] [drm:intel_psr_enable] PSR not supported on this platform [ 2.046482] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 2.046501] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 2.046505] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 2.049619] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 2.049621] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 2.049635] [drm:verify_single_dpll_state] PORT PLL A [ 2.049663] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 2.053604] Console: switching to colour frame buffer device 240x67 [ 2.053606] [drm:drm_fb_helper_hotplug_event] [ 2.053607] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 2.053608] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 2.053693] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 2.053777] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 2.053871] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.053872] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 2.053873] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 2.053874] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 2.053874] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 2.053875] [drm:intel_power_well_enable] enabling power well 2 [ 2.053876] [drm:skl_set_power_well] Enabling power well 2 [ 2.055891] [drm:intel_power_well_enable] enabling dpio-common-bc [ 2.055910] [drm:intel_power_well_disable] disabling dpio-common-bc [ 2.055911] [drm:intel_power_well_disable] disabling power well 2 [ 2.055913] [drm:skl_set_power_well] Disabling power well 2 [ 2.055914] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] disconnected [ 2.055915] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 2.055915] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 2.055916] [drm:intel_power_well_enable] enabling power well 2 [ 2.055916] [drm:skl_set_power_well] Enabling power well 2 [ 2.153622] [drm:intel_hdmi_detect] HDMI live status down [ 2.153622] [drm:intel_power_well_disable] disabling power well 2 [ 2.153624] [drm:skl_set_power_well] Disabling power well 2 [ 2.153626] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 2.153626] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 2.153626] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 2.153627] [drm:intel_power_well_enable] enabling power well 2 [ 2.153628] [drm:skl_set_power_well] Enabling power well 2 [ 2.155634] [drm:intel_power_well_enable] enabling dpio-common-bc [ 2.155652] [drm:intel_power_well_disable] disabling dpio-common-bc [ 2.155653] [drm:intel_power_well_disable] disabling power well 2 [ 2.155655] [drm:skl_set_power_well] Disabling power well 2 [ 2.155656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] disconnected [ 2.155657] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 2.155657] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 2.155658] [drm:intel_power_well_enable] enabling power well 2 [ 2.155658] [drm:skl_set_power_well] Enabling power well 2 [ 2.271666] [drm:intel_hdmi_detect] HDMI live status down [ 2.271666] [drm:intel_power_well_disable] disabling power well 2 [ 2.271668] [drm:skl_set_power_well] Disabling power well 2 [ 2.271669] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 2.271671] [drm:drm_setup_crtcs] [ 2.271672] [drm:drm_enable_connectors] connector 39 enabled? yes [ 2.271673] [drm:drm_enable_connectors] connector 47 enabled? no [ 2.271673] [drm:drm_enable_connectors] connector 51 enabled? no [ 2.271673] [drm:drm_enable_connectors] connector 54 enabled? no [ 2.271674] [drm:drm_enable_connectors] connector 58 enabled? no [ 2.271675] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 2.271675] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 2.271676] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 2.271676] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 2.271677] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 2.271677] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping [ 2.271677] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 2.271678] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 2.271685] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 2.272715] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 2.280789] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.356872] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.425644] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 2.425799] systemd[1]: Detected architecture x86-64. [ 2.429283] systemd[1]: Set hostname to . [ 2.458972] systemd[1]: Listening on Syslog Socket. [ 2.461574] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.464140] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.466755] systemd[1]: Listening on Journal Audit Socket. [ 2.469416] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.472075] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.474760] systemd[1]: Created slice User and Session Slice. [ 2.477415] systemd[1]: Reached target Encrypted Volumes. [ 2.480079] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.482783] systemd[1]: Created slice System Slice. [ 2.485424] systemd[1]: Reached target Slices. [ 2.488073] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.490716] systemd[1]: Listening on Journal Socket. [ 2.506756] systemd[1]: Starting Uncomplicated firewall... [ 2.509770] systemd[1]: Started Read required files in advance. [ 2.513179] systemd[1]: Starting Load Kernel Modules... [ 2.515856] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.518079] lp: driver loaded but no devices found [ 2.519693] systemd[1]: Started Braille Device Support. [ 2.520039] ppdev: user-space parallel port driver [ 2.523927] systemd[1]: Starting Journal Service... [ 2.526918] systemd[1]: Mounting Huge Pages File System... [ 2.529821] systemd[1]: Mounting POSIX Message Queue File System... [ 2.532517] systemd[1]: Reached target Remote File Systems (Pre). [ 2.535456] systemd[1]: Reached target Remote File Systems. [ 2.538250] systemd[1]: Mounting Debug File System... [ 2.540827] systemd[1]: Created slice system-getty.slice. [ 2.543823] systemd[1]: Listening on udev Control Socket. [ 2.546012] systemd[1]: Listening on udev Kernel Socket. [ 2.548937] systemd[1]: Mounted POSIX Message Queue File System. [ 2.551121] systemd[1]: Mounted Huge Pages File System. [ 2.553284] systemd[1]: Mounted Debug File System. [ 2.555759] systemd[1]: Started Uncomplicated firewall. [ 2.558145] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED [ 2.559337] systemd[1]: ureadahead.service: Unit entered failed state. [ 2.560360] systemd[1]: ureadahead.service: Failed with result 'exit-code'. [ 2.561479] systemd[1]: Started Load Kernel Modules. [ 2.563992] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.566856] systemd[1]: Started Journal Service. [ 2.618917] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 2.631182] systemd-journald[247]: Received request to flush runtime journal from PID 1 [ 2.654071] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 2.654074] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 2.654076] [drm:intel_power_well_disable] disabling DC off [ 2.654077] [drm:gen9_enable_dc5] Enabling DC5 [ 2.654078] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 2.738220] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.742278] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=96000/96000 [ 2.742280] [drm:intel_panel_actually_set_backlight] set backlight PWM = 96000 [ 2.742283] [drm:intel_power_well_enable] enabling DC off [ 2.742284] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 2.742291] [drm:intel_power_well_disable] disabling DC off [ 2.742293] [drm:gen9_enable_dc5] Enabling DC5 [ 2.742293] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 2.756781] Intel(R) Wireless WiFi driver for Linux [ 2.756783] Copyright(c) 2003- 2015 Intel Corporation [ 2.760849] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2 [ 2.760865] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2 [ 2.760882] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2 [ 2.760890] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2 [ 2.760897] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2 [ 2.762143] iwlwifi 0000:02:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm [ 2.764834] Bluetooth: Core ver 2.21 [ 2.764843] NET: Registered protocol family 31 [ 2.764844] Bluetooth: HCI device and connection manager initialized [ 2.764903] Bluetooth: HCI socket layer initialized [ 2.764905] Bluetooth: L2CAP socket layer initialized [ 2.764908] Bluetooth: SCO socket layer initialized [ 2.779943] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 2.780814] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2.781089] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2.784323] Adding 3994620k swap on /dev/sda3. Priority:-1 extents:1 across:3994620k SSFS [ 2.786902] usbcore: registered new interface driver btusb [ 2.790506] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 2.790865] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 2.807019] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 2.821030] random: nonblocking pool is initialized [ 2.849847] audit: type=1400 audit(1466449356.463:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=457 comm="apparmor_parser" [ 2.854604] audit: type=1400 audit(1466449356.483:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=454 comm="apparmor_parser" [ 2.854608] audit: type=1400 audit(1466449356.483:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=454 comm="apparmor_parser" [ 2.854610] audit: type=1400 audit(1466449356.483:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=454 comm="apparmor_parser" [ 2.854613] audit: type=1400 audit(1466449356.483:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=454 comm="apparmor_parser" [ 2.856253] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.859217] audit: type=1400 audit(1466449356.499:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=471 comm="apparmor_parser" [ 2.861270] audit: type=1400 audit(1466449356.507:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=473 comm="apparmor_parser" [ 2.861274] audit: type=1400 audit(1466449356.507:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=473 comm="apparmor_parser" [ 2.861277] audit: type=1400 audit(1466449356.507:10): apparmor="STATUS" operation="profile_load" name="third_party" pid=473 comm="apparmor_parser" [ 2.863416] audit: type=1400 audit(1466449356.519:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=477 comm="apparmor_parser" [ 2.864017] [drm:intel_power_well_enable] enabling DC off [ 2.864020] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 2.864033] [drm:intel_power_well_enable] enabling power well 2 [ 2.864033] [drm:skl_set_power_well] Enabling power well 2 [ 2.869618] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 2.877553] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.877555] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.877557] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 2.877558] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.877559] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.877560] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 2.897639] SSE version of gcm_enc/dec engaged. [ 2.918395] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 2.991606] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 2.996532] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 3.025858] dw-apb-uart.8: ttyS4 at MMIO 0x9232c000 (irq = 4, base_baud = 115200) is a 16550A [ 3.052198] dw-apb-uart.9: ttyS5 at MMIO 0x9232e000 (irq = 5, base_baud = 115200) is a 16550A [ 3.080821] dw-apb-uart.10: ttyS6 at MMIO 0x92330000 (irq = 6, base_baud = 115200) is a 16550A [ 3.095765] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.096684] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.097021] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.097199] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 3.097201] i2c_hid i2c-ELAN221D:00: hid_descr_cmd failed [ 3.106246] dw-apb-uart.11: ttyS7 at MMIO 0x92332000 (irq = 7, base_baud = 115200) is a 16550A [ 3.115297] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.115298] Bluetooth: BNEP filters: protocol multicast [ 3.115299] Bluetooth: BNEP socket layer initialized [ 3.129490] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7 [ 3.129645] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8 [ 3.129796] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9 [ 3.129948] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10 [ 3.130001] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11 [ 3.133191] [drm:intel_power_well_disable] disabling power well 2 [ 3.133205] [drm:skl_set_power_well] Disabling power well 2 [ 3.133209] [drm:intel_power_well_disable] disabling DC off [ 3.133214] [drm:gen9_enable_dc5] Enabling DC5 [ 3.133217] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 3.142455] i2c_hid i2c-ALPS0001:00: hid_descr_cmd failed [ 3.148753] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.151533] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.151704] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.172501] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.172660] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.178516] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.181784] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.204905] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.232644] asix 1-2.3:1.0 eth0: register 'asix' at usb-0000:00:15.0-2.3, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:c2:b6 [ 3.232661] usbcore: registered new interface driver asix [ 3.234281] asix 1-2.3:1.0 enx00106031c2b6: renamed from eth0 [ 3.248644] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 3.250609] asix 1-2.3:1.0 enx00106031c2b6: link down [ 3.250807] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 3.274744] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 3.671734] IPv6: ADDRCONF(NETDEV_CHANGE): enx00106031c2b6: link becomes ready [ 3.671850] asix 1-2.3:1.0 enx00106031c2b6: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 5.858557] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 13.873605] vgem_basic: executing [ 13.876028] [drm:i915_gem_open] [ 13.876074] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 13.878299] [drm:i915_gem_open] [ 13.878346] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 13.881137] vgem_basic: starting subtest mmap [ 13.881721] [drm:vgem_gem_dumb_create] Created object of size 4194304 [ 13.881744] ------------[ cut here ]------------ [ 13.882281] kernel BUG at mm/memory.c:1529! [ 13.882826] invalid opcode: 0000 [#1] SMP [ 13.883377] Modules linked in: vgem snd_hda_codec_hdmi bnep asix usbnet mii spi_pxa2xx_platform 8250_dw i2c_designware_platform x86_pkg_temp_thermal i2c_designware_core intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_codec_realtek snd_hda_codec_generic serio_raw binfmt_misc arc4 nls_iso8859_1 snd_hda_intel iwlmvm input_leds mac80211 intel_lpss_pci btusb intel_lpss btrtl btbcm btintel snd_hda_codec snd_hda_core snd_hwdep bluetooth snd_pcm iwlwifi snd_seq_midi snd_seq_midi_event snd_rawmidi cfg80211 snd_seq snd_seq_device shpchp snd_timer mei_me snd mei soundcore rfkill_gpio soc_button_array tpm_crb intel_pmc_ipc mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid [ 13.885582] mmc_block i915 igb drm_kms_helper dca syscopyarea sysfillrect ptp sysimgblt sdhci_pci fb_sys_fops pps_core sdhci i2c_algo_bit ahci drm libahci i2c_hid hid video [ 13.887183] CPU: 1 PID: 1244 Comm: vgem_basic Tainted: G U 4.7.0-rc4-drm-intel-nightly-ww26-commit-f586720+ #1 [ 13.888027] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B25.1605230512 05/23/2016 [ 13.888908] task: ffff880466bdcc40 ti: ffff88046bdbc000 task.ti: ffff88046bdbc000 [ 13.889794] RIP: 0010:[] [] vm_insert_page+0x19b/0x1b0 [ 13.890705] RSP: 0000:ffff88046bdbfd38 EFLAGS: 00010202 [ 13.891627] RAX: 0000000000000001 RBX: ffff880466947da8 RCX: 0000000000000000 [ 13.892569] RDX: 0000000000000002 RSI: 00007f15cc0b9000 RDI: ffff880467a01c68 [ 13.893509] RBP: ffff88046bdbfd68 R08: ffff88046d37f100 R09: ffff88046bdbfe58 [ 13.894470] R10: 00003fffffe00000 R11: 0000000000000000 R12: ffffea001176eb40 [ 13.895450] R13: 00007f15cc0b9000 R14: ffff880466947da8 R15: 0000000000000002 [ 13.896436] FS: 00007f15ce7ca740(0000) GS:ffff88047f880000(0000) knlGS:0000000000000000 [ 13.897434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.898444] CR2: 00007f15cc0b9000 CR3: 000000046bd21000 CR4: 00000000003406e0 [ 13.899480] Stack: [ 13.900517] 0000000000000000 00007f15cc0b9000 ffff88046bdbfe58 0000000000100000 [ 13.901579] ffff880466947da8 0000000000000002 ffff88046bdbfd78 ffffffffc052d12b [ 13.902663] ffff88046bdbfde0 ffffffff811b8976 024200ca00000055 0000000000100000 [ 13.903766] Call Trace: [ 13.904861] [] vgem_gem_fault+0x4b/0x90 [vgem] [ 13.905974] [] __do_fault+0x66/0x130 [ 13.907095] [] ? __pte_alloc+0xb8/0x110 [ 13.908183] [] handle_mm_fault+0x35d/0x1c90 [ 13.909231] [] ? do_mmap+0x440/0x540 [ 13.910260] [] ? common_mmap+0x48/0x50 [ 13.911290] [] ? apparmor_mmap_file+0x16/0x20 [ 13.912321] [] __do_page_fault+0x1e2/0x4d0 [ 13.913331] [] do_page_fault+0x22/0x30 [ 13.914353] [] page_fault+0x28/0x30 [ 13.915370] Code: 83 c4 08 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 f2 ff ff ff c3 48 8b 7d d0 c6 07 00 0f 1f 40 00 b8 f0 ff ff ff e9 06 ff ff ff <0f> 0b 0f 0b b8 ea ff ff ff c3 66 66 2e 0f 1f 84 00 00 00 00 00 [ 13.916560] RIP [] vm_insert_page+0x19b/0x1b0 [ 13.917639] RSP [ 13.918754] ---[ end trace 22452399a79e67b6 ]---