[ 0.000000] Linux version 4.7.0-rc4-nightly+ (jenkins@vanaheimr) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #2 SMP Mon Jun 27 02:07:11 CEST 2016 [ 0.000000] Command line: vmlinuz root=/dev/sda2 initrd=initrd.img idle=halt log_buf_len=4M i915.enable_rc6=1 i915.preliminary_hw_support=1 drm.debug=0xe i915.enable_guc_submission=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000012152000-0x0000000077ff8fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077ff9000-0x0000000079da8fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079da9000-0x0000000079e08fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079e09000-0x0000000079e38fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000079e39000-0x000000007ac2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ac2c000-0x000000007ac2cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ac2d000-0x000000007ac56fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ac57000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by EDK II [ 0.000000] efi: ACPI=0x79e38000 ACPI 2.0=0x79e38014 ESRT=0x79d74000 SMBIOS=0x7815a000 SMBIOS 3.0=0x78158000 PROP=0x7a06c920 [ 0.000000] efi: requested map not found. [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 0100000000 mask 7F00000000 write-back [ 0.000000] 4 base 0200000000 mask 7F00000000 write-back [ 0.000000] 5 base 0300000000 mask 7F00000000 write-back [ 0.000000] 6 base 0400000000 mask 7F80000000 write-back [ 0.000000] 7 base 00FF800000 mask 70FF800000 write-combining [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02013000, 0x02013fff] PGTABLE [ 0.000000] BRK [0x02014000, 0x02014fff] PGTABLE [ 0.000000] BRK [0x02015000, 0x02015fff] PGTABLE [ 0.000000] BRK [0x02016000, 0x02016fff] PGTABLE [ 0.000000] BRK [0x02017000, 0x02017fff] PGTABLE [ 0.000000] BRK [0x02018000, 0x02018fff] PGTABLE [ 0.000000] log_buf_len: 4194304 bytes [ 0.000000] early log buf free: 257452(98%) [ 0.000000] RAMDISK: [mem 0x72da5000-0x74b9dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000079E38014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x0000000079E10188 0000DC (v01 INTEL EDK2 00000003 BRXT 01000013) [ 0.000000] ACPI: FACP 0x0000000079E30000 00010C (v05 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160422/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160422/tbfadt-708) [ 0.000000] ACPI: DSDT 0x0000000079E22000 008C82 (v02 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: FACS 0x0000000079DF7000 000040 [ 0.000000] ACPI: SSDT 0x0000000079E36000 0003C6 (v02 INTEL Tpm2Tabl 00001000 INTL 20150818) [ 0.000000] ACPI: TPM2 0x0000000079E35000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: UEFI 0x0000000079DFF000 000042 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: BDAT 0x0000000079E34000 000030 (v02 00000000 00000000) [ 0.000000] ACPI: DBG2 0x0000000079E33000 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: DBGP 0x0000000079E32000 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: HPET 0x0000000079E2F000 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: LPIT 0x0000000079E2E000 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: APIC 0x0000000079E2D000 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: MCFG 0x0000000079E2C000 00003C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: NPKT 0x0000000079E2B000 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E18000 004549 (v02 INTEL RVPRtd3 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E17000 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E15000 001659 (v01 Intel_ Platform 00001000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E14000 000400 (v02 PmRef Cpu0Ist 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E13000 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E12000 000356 (v02 PmRef Cpu0Tst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E11000 00017C (v02 PmRef ApTst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E0D000 0027E6 (v02 SaSsdt SaSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: FPDT 0x0000000079E37000 000044 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: WDAT 0x0000000079E31000 000104 (v01 00000000 00000000) [ 0.000000] ACPI: NHLT 0x0000000079E20000 001A50 (v00 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x47fbfa000-0x47fbfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000effffff] [ 0.000000] node 0: [mem 0x0000000012152000-0x0000000077ff8fff] [ 0.000000] node 0: [mem 0x0000000079e39000-0x000000007ac2bfff] [ 0.000000] node 0: [mem 0x000000007ac57000-0x000000007affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff] [ 0.000000] On node 0 totalpages: 4153311 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7490 pages used for memmap [ 0.000000] DMA32 zone: 479299 pages, LIFO batch:31 [ 0.000000] Normal zone: 57344 pages used for memmap [ 0.000000] Normal zone: 3670016 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff] [ 0.000000] PM: Registered nosave memory: [mem 0x77ff9000-0x79da8fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79da9000-0x79e08fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79e09000-0x79e38fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac2c000-0x7ac2cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac2d000-0x7ac56fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff88047f800000 s102744 r8192 d32424 u524288 [ 0.000000] pcpu-alloc: s102744 r8192 d32424 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4088392 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vmlinuz root=/dev/sda2 initrd=initrd.img idle=halt log_buf_len=4M i915.enable_rc6=1 i915.preliminary_hw_support=1 drm.debug=0xe i915.enable_guc_submission=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16188004K/16613244K available (7829K kernel code, 1311K rwdata, 3620K rodata, 1508K init, 1308K bss, 425240K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4411.519 MHz processor [ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 8823.03 BogoMIPS (lpj=17646076) [ 0.000029] pid_max: default: 32768 minimum: 301 [ 0.000034] ACPI: Core revision 20160422 [ 0.000280] Security Framework initialized [ 0.000283] Yama: becoming mindful. [ 0.000288] AppArmor: AppArmor initialized [ 0.000860] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003248] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004316] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004329] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004507] CPU: Physical Processor ID: 0 [ 0.004511] CPU: Processor Core ID: 0 [ 0.004519] mce: CPU supports 7 MCE banks [ 0.004530] CPU0: Thermal monitoring enabled (TM1) [ 0.004552] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.004554] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.005364] Freeing SMP alternatives memory: 32K (ffffffff81ec2000 - ffffffff81eca000) [ 0.009670] ftrace: allocating 31359 entries in 123 pages [ 0.028676] smpboot: Max logical packages: 1 [ 0.028681] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.029026] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.030350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070038] TSC deadline timer enabled [ 0.070041] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x9) [ 0.070047] Performance Events: PEBS fmt3+, 32-deep LBR, Goldmont events, full-width counters, Intel PMU driver. [ 0.070057] ... version: 4 [ 0.070059] ... bit width: 48 [ 0.070061] ... generic registers: 4 [ 0.070063] ... value mask: 0000ffffffffffff [ 0.070065] ... max period: 0000ffffffffffff [ 0.070067] ... fixed-purpose events: 3 [ 0.070068] ... event mask: 000000070000000f [ 0.070513] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.070607] x86: Booting SMP configuration: [ 0.070610] .... node #0, CPUs: #1 #2 #3 [ 0.312139] x86: Booted up 1 node, 4 CPUs [ 0.312144] smpboot: Total of 4 processors activated (35299.53 BogoMIPS) [ 0.313166] devtmpfs: initialized [ 0.313207] x86/mm: Memory block size: 128MB [ 0.316959] evm: security.selinux [ 0.316961] evm: security.SMACK64 [ 0.316963] evm: security.ima [ 0.316965] evm: security.capability [ 0.317027] PM: Registering ACPI NVS region [mem 0x79da9000-0x79e08fff] (393216 bytes) [ 0.317035] PM: Registering ACPI NVS region [mem 0x7ac2c000-0x7ac2cfff] (4096 bytes) [ 0.317074] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.317103] pinctrl core: initialized pinctrl subsystem [ 0.317192] RTC time: 23:39:11, date: 06/27/16 [ 0.317891] NET: Registered protocol family 16 [ 0.328141] cpuidle: using governor ladder [ 0.330128] cpuidle: using governor menu [ 0.330197] ACPI: bus type PCI registered [ 0.330199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.330245] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.330249] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.330254] PCI: Using configuration type 1 for base access [ 0.334220] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.334223] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.334397] ACPI: Added _OSI(Module Device) [ 0.334400] ACPI: Added _OSI(Processor Device) [ 0.334402] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.334404] ACPI: Added _OSI(Processor Aggregator Device) [ 0.337637] ACPI: Executed 3 blocks of module-level executable AML code [ 0.339159] ACPI: Executed 2 blocks of module-level executable AML code [ 0.340025] ACPI: Executed 1 blocks of module-level executable AML code [ 0.342230] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.346187] ACPI: Dynamic OEM Table Load: [ 0.346194] ACPI: SSDT 0xFFFF88046CDA7200 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20150818) [ 0.346715] ACPI: Dynamic OEM Table Load: [ 0.346721] ACPI: SSDT 0xFFFF88046CDA7400 00015F (v02 PmRef ApIst 00003000 INTL 20150818) [ 0.347155] ACPI: Dynamic OEM Table Load: [ 0.347161] ACPI: SSDT 0xFFFF88046CDA2B40 00008D (v02 PmRef ApCst 00003000 INTL 20150818) [ 0.348008] ACPI : EC: EC started [ 0.578305] ACPI: Interpreter enabled [ 0.578322] ACPI: (supports S0 S3 S4 S5) [ 0.578324] ACPI: Using IOAPIC for interrupt routing [ 0.578345] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.579397] ACPI: Power Resource [PXP] (off) [ 0.579747] ACPI: Power Resource [PXP] (on) [ 0.598517] ACPI: Power Resource [PXP] (on) [ 0.618486] ACPI: Power Resource [PXP] (off) [ 0.618793] ACPI: Power Resource [PXP] (off) [ 0.619100] ACPI: Power Resource [PXP] (off) [ 0.619485] ACPI: Power Resource [SPPR] (on) [ 0.638351] ACPI: Power Resource [ODPR] (on) [ 0.638447] ACPI: Power Resource [SPPR] (off) [ 0.638628] ACPI: Power Resource [ODPR] (on) [ 0.638809] ACPI: Power Resource [UPPR] (on) [ 0.638968] ACPI: Power Resource [UPPR] (on) [ 0.639102] ACPI: Power Resource [UPPR] (on) [ 0.639343] ACPI: Power Resource [UPPR] (on) [ 0.639500] ACPI: Power Resource [UPPR] (on) [ 0.639634] ACPI: Power Resource [UPPR] (on) [ 0.639785] ACPI: Power Resource [USBC] (on) [ 0.639859] ACPI: Power Resource [SDPR] (on) [ 0.654471] ACPI: Power Resource [LSPR] (on) [ 0.656077] ACPI: Power Resource [PAUD] (on) [ 0.657923] ACPI: Power Resource [FN00] (on) [ 0.742576] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.742582] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.743031] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.743042] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.743369] PCI host bridge to bus 0000:00 [ 0.743372] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.743375] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.743377] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.743380] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.743382] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.743386] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.743389] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.743392] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] [ 0.743396] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] [ 0.743399] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] [ 0.743402] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window] [ 0.743406] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window] [ 0.743409] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window] [ 0.743412] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window] [ 0.743416] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window] [ 0.743419] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window] [ 0.743422] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window] [ 0.743426] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window] [ 0.743429] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window] [ 0.743433] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.743440] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000 [ 0.743594] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000 [ 0.743600] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.743604] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.743607] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.743752] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000 [ 0.743757] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit] [ 0.743903] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300 [ 0.743912] pci 0000:00:0e.0: reg 0x10: [mem 0x92310000-0x92313fff 64bit] [ 0.743925] pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit] [ 0.743953] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 0.744089] pci 0000:00:0e.0: System wakeup disabled by ACPI [ 0.744118] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000 [ 0.744130] pci 0000:00:0f.0: reg 0x10: [mem 0x92318000-0x92318fff 64bit] [ 0.744170] pci 0000:00:0f.0: PME# supported from D3hot [ 0.744298] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007 [ 0.744310] pci 0000:00:11.0: reg 0x10: [mem 0x92314000-0x92315fff 64bit] [ 0.744317] pci 0000:00:11.0: reg 0x18: [mem 0x9231b000-0x9231bfff 64bit] [ 0.744465] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601 [ 0.744473] pci 0000:00:12.0: reg 0x10: [mem 0x92316000-0x92317fff] [ 0.744476] pci 0000:00:12.0: reg 0x14: [mem 0x92342000-0x923420ff] [ 0.744480] pci 0000:00:12.0: reg 0x18: [io 0x2080-0x2087] [ 0.744483] pci 0000:00:12.0: reg 0x1c: [io 0x2088-0x208b] [ 0.744487] pci 0000:00:12.0: reg 0x20: [io 0x2060-0x207f] [ 0.744490] pci 0000:00:12.0: reg 0x24: [mem 0x92340000-0x923407ff] [ 0.744507] pci 0000:00:12.0: PME# supported from D3hot [ 0.744640] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400 [ 0.744671] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.744806] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.744846] pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400 [ 0.744885] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold [ 0.745029] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.745067] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330 [ 0.745076] pci 0000:00:15.0: reg 0x10: [mem 0x92300000-0x9230ffff 64bit] [ 0.745104] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 0.745210] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.745246] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000 [ 0.745255] pci 0000:00:16.0: reg 0x10: [mem 0x9231c000-0x9231cfff 64bit] [ 0.745261] pci 0000:00:16.0: reg 0x18: [mem 0x9231d000-0x9231dfff 64bit] [ 0.745403] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000 [ 0.745413] pci 0000:00:16.1: reg 0x10: [mem 0x9231e000-0x9231efff 64bit] [ 0.745418] pci 0000:00:16.1: reg 0x18: [mem 0x9231f000-0x9231ffff 64bit] [ 0.745560] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000 [ 0.745570] pci 0000:00:16.2: reg 0x10: [mem 0x92320000-0x92320fff 64bit] [ 0.745577] pci 0000:00:16.2: reg 0x18: [mem 0x92321000-0x92321fff 64bit] [ 0.745718] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000 [ 0.745728] pci 0000:00:16.3: reg 0x10: [mem 0x92322000-0x92322fff 64bit] [ 0.745734] pci 0000:00:16.3: reg 0x18: [mem 0x92323000-0x92323fff 64bit] [ 0.745881] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000 [ 0.745890] pci 0000:00:17.0: reg 0x10: [mem 0x92324000-0x92324fff 64bit] [ 0.745897] pci 0000:00:17.0: reg 0x18: [mem 0x92325000-0x92325fff 64bit] [ 0.746039] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000 [ 0.746048] pci 0000:00:17.1: reg 0x10: [mem 0x92326000-0x92326fff 64bit] [ 0.746055] pci 0000:00:17.1: reg 0x18: [mem 0x92327000-0x92327fff 64bit] [ 0.746198] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000 [ 0.746208] pci 0000:00:17.2: reg 0x10: [mem 0x92328000-0x92328fff 64bit] [ 0.746213] pci 0000:00:17.2: reg 0x18: [mem 0x92329000-0x92329fff 64bit] [ 0.746360] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000 [ 0.746371] pci 0000:00:17.3: reg 0x10: [mem 0x9232a000-0x9232afff 64bit] [ 0.746377] pci 0000:00:17.3: reg 0x18: [mem 0x9232b000-0x9232bfff 64bit] [ 0.746522] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000 [ 0.746531] pci 0000:00:18.0: reg 0x10: [mem 0x9232c000-0x9232cfff 64bit] [ 0.746539] pci 0000:00:18.0: reg 0x18: [mem 0x9232d000-0x9232dfff 64bit] [ 0.746678] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000 [ 0.746689] pci 0000:00:18.1: reg 0x10: [mem 0x9232e000-0x9232efff 64bit] [ 0.746694] pci 0000:00:18.1: reg 0x18: [mem 0x9232f000-0x9232ffff 64bit] [ 0.746836] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000 [ 0.746846] pci 0000:00:18.2: reg 0x10: [mem 0x92330000-0x92330fff 64bit] [ 0.746851] pci 0000:00:18.2: reg 0x18: [mem 0x92331000-0x92331fff 64bit] [ 0.746994] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000 [ 0.747005] pci 0000:00:18.3: reg 0x10: [mem 0x92332000-0x92332fff 64bit] [ 0.747011] pci 0000:00:18.3: reg 0x18: [mem 0x92333000-0x92333fff 64bit] [ 0.747157] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000 [ 0.747167] pci 0000:00:19.0: reg 0x10: [mem 0x92334000-0x92334fff 64bit] [ 0.747173] pci 0000:00:19.0: reg 0x18: [mem 0x92335000-0x92335fff 64bit] [ 0.747314] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000 [ 0.747323] pci 0000:00:19.1: reg 0x10: [mem 0x92336000-0x92336fff 64bit] [ 0.747329] pci 0000:00:19.1: reg 0x18: [mem 0x92337000-0x92337fff 64bit] [ 0.747471] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000 [ 0.747480] pci 0000:00:19.2: reg 0x10: [mem 0x92338000-0x92338fff 64bit] [ 0.747486] pci 0000:00:19.2: reg 0x18: [mem 0x92339000-0x92339fff 64bit] [ 0.747634] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501 [ 0.747643] pci 0000:00:1b.0: reg 0x10: [mem 0x9233a000-0x9233afff 64bit] [ 0.747648] pci 0000:00:1b.0: reg 0x18: [mem 0x9233b000-0x9233bfff 64bit] [ 0.747803] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501 [ 0.747812] pci 0000:00:1c.0: reg 0x10: [mem 0x9233c000-0x9233cfff 64bit] [ 0.747817] pci 0000:00:1c.0: reg 0x18: [mem 0x9233d000-0x9233dfff 64bit] [ 0.747968] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501 [ 0.747977] pci 0000:00:1e.0: reg 0x10: [mem 0x9233e000-0x9233efff 64bit] [ 0.747982] pci 0000:00:1e.0: reg 0x18: [mem 0x9233f000-0x9233ffff 64bit] [ 0.748122] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100 [ 0.748284] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 [ 0.748301] pci 0000:00:1f.1: reg 0x10: [mem 0x92341000-0x923410ff 64bit] [ 0.748322] pci 0000:00:1f.1: reg 0x20: [io 0x2040-0x205f] [ 0.748509] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.748531] pci 0000:01:00.0: reg 0x10: [mem 0x92200000-0x9221ffff] [ 0.748542] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f] [ 0.748549] pci 0000:01:00.0: reg 0x1c: [mem 0x92220000-0x92223fff] [ 0.748604] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.748627] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.754359] pci 0000:00:13.0: PCI bridge to [bus 01] [ 0.754363] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 0.754365] pci 0000:00:13.0: bridge window [mem 0x92200000-0x922fffff] [ 0.754482] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.754556] pci 0000:02:00.0: reg 0x10: [mem 0x92100000-0x92101fff 64bit] [ 0.754759] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug [ 0.754878] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.754973] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.762403] pci 0000:00:14.0: PCI bridge to [bus 02] [ 0.762412] pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff] [ 0.763799] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.763841] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.763881] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.763921] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.763962] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.764003] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.764042] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.764085] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.764555] ACPI: Enabled 2 GPEs in block 00 to 7F [ 0.764567] ACPI : EC: EC stopped [ 0.764620] ACPI : EC: GPE = 0x2b, I/O: command/status = 0x66, data = 0x62 [ 0.764623] ACPI : EC: EC started [ 0.994607] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.994612] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.994618] vgaarb: loaded [ 0.994620] vgaarb: bridge control possible 0000:00:02.0 [ 0.994723] SCSI subsystem initialized [ 0.994754] libata version 3.00 loaded. [ 0.994766] ACPI: bus type USB registered [ 0.994780] usbcore: registered new interface driver usbfs [ 0.994789] usbcore: registered new interface driver hub [ 0.994801] usbcore: registered new device driver usb [ 0.994897] PCI: Using ACPI for IRQ routing [ 0.996678] PCI: pci_cache_line_size set to 64 bytes [ 0.996818] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.996819] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.996820] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff] [ 0.996820] e820: reserve RAM buffer [mem 0x77ff9000-0x77ffffff] [ 0.996821] e820: reserve RAM buffer [mem 0x7ac2c000-0x7bffffff] [ 0.996822] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 0.996883] NetLabel: Initializing [ 0.996885] NetLabel: domain hash size = 128 [ 0.996887] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.996895] NetLabel: unlabeled traffic allowed by default [ 0.996989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.996995] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 0.997513] clocksource: Switched to clocksource hpet [ 1.001234] VFS: Disk quotas dquot_6.6.0 [ 1.001249] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.001290] AppArmor: AppArmor Filesystem Enabled [ 1.001322] pnp: PnP ACPI init [ 1.001419] system 00:00: [io 0x06a4] has been reserved [ 1.001423] system 00:00: [io 0x06a0] has been reserved [ 1.001427] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.001493] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io 0x1000-0x1fff] [ 1.001516] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.001519] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.001522] system 00:01: [io 0x0500-0x05fe] has been reserved [ 1.001524] system 00:01: [io 0x0600-0x061f] has been reserved [ 1.001527] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.001568] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.001831] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.001834] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved [ 1.001837] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.001839] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.001842] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved [ 1.001845] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved [ 1.001847] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved [ 1.001850] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.001852] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.001856] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.001983] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.002069] pnp: PnP ACPI: found 5 devices [ 1.008477] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.008499] pci 0000:00:13.0: PCI bridge to [bus 01] [ 1.008502] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 1.008506] pci 0000:00:13.0: bridge window [mem 0x92200000-0x922fffff] [ 1.008511] pci 0000:00:14.0: PCI bridge to [bus 02] [ 1.008518] pci 0000:00:14.0: bridge window [mem 0x92100000-0x921fffff] [ 1.008527] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.008528] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.008529] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.008531] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.008532] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.008533] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.008534] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 1.008535] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window] [ 1.008536] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window] [ 1.008537] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window] [ 1.008538] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window] [ 1.008539] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window] [ 1.008541] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window] [ 1.008542] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window] [ 1.008543] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window] [ 1.008544] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window] [ 1.008545] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window] [ 1.008546] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window] [ 1.008547] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window] [ 1.008548] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.008549] pci_bus 0000:01: resource 1 [mem 0x92200000-0x922fffff] [ 1.008551] pci_bus 0000:02: resource 1 [mem 0x92100000-0x921fffff] [ 1.008566] NET: Registered protocol family 2 [ 1.008687] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.008921] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.009099] TCP: Hash tables configured (established 131072 bind 65536) [ 1.009126] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.009199] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.009291] NET: Registered protocol family 1 [ 1.009302] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.009504] PCI: CLS 64 bytes, default 64 [ 1.009533] Trying to unpack rootfs image as initramfs... [ 1.322681] Freeing initrd memory: 30692K (ffff880072da5000 - ffff880074b9e000) [ 1.322688] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.322690] software IO TLB [mem 0x6eda5000-0x72da5000] (64MB) mapped at [ffff88006eda5000-ffff880072da4fff] [ 1.322775] Scanning for low memory corruption every 60 seconds [ 1.323002] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.323015] audit: initializing netlink subsys (disabled) [ 1.323024] audit: type=2000 audit(1467070752.467:1): initialized [ 1.323223] Initialise system trusted keyrings [ 1.323298] workingset: timestamp_bits=38 max_order=22 bucket_order=0 [ 1.324736] fuse init (API version 7.24) [ 1.324831] Key type big_key registered [ 1.325528] Key type asymmetric registered [ 1.325531] Asymmetric key parser 'x509' registered [ 1.325558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.325599] io scheduler noop registered [ 1.325601] io scheduler deadline registered (default) [ 1.325623] io scheduler cfq registered [ 1.325732] pcieport 0000:00:13.0: can't derive routing for PCI INT C [ 1.325736] pcieport 0000:00:13.0: PCI INT C: not connected [ 1.325832] pcieport 0000:00:14.0: can't derive routing for PCI INT B [ 1.325835] pcieport 0000:00:14.0: PCI INT B: not connected [ 1.325905] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt [ 1.325909] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.325912] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded [ 1.325927] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt [ 1.325930] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.325937] pcie_pme 0000:00:14.0:pcie001: service driver pcie_pme loaded [ 1.325940] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.325945] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.325968] efifb: probing for efifb [ 1.325978] efifb: framebuffer at 0x80000000, using 9000k, total 9000k [ 1.325980] efifb: mode is 1920x1200x32, linelength=7680, pages=1 [ 1.325982] efifb: scrolling: redraw [ 1.325984] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.330553] Console: switching to colour frame buffer device 240x75 [ 1.335043] fb0: EFI VGA frame buffer device [ 1.335065] ipmi message handler version 39.2 [ 1.335126] ACPI: AC Adapter [ADP1] (off-line) [ 1.335176] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0 [ 1.335358] ACPI: Lid Switch [LID0] [ 1.335404] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.335431] ACPI: Power Button [PWRB] [ 1.335471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.335494] ACPI: Power Button [PWRF] [ 1.339242] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.339262] ACPI: Thermal Zone [TZ01] (32 C) [ 1.339294] GHES: HEST is not enabled! [ 1.339378] ACPI: Battery Slot [BAT0] (battery present) [ 1.339386] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.339440] ACPI: Battery Slot [BAT1] (battery absent) [ 1.359457] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.360919] Linux agpgart interface v0.103 [ 1.363338] brd: module loaded [ 1.364397] loop: module loaded [ 1.364675] libphy: Fixed MDIO Bus: probed [ 1.364747] tun: Universal TUN/TAP device driver, 1.6 [ 1.364765] tun: (C) 1999-2004 Max Krasnyansky [ 1.364826] PPP generic driver version 2.4.2 [ 1.364887] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.364908] ohci-pci: OHCI PCI platform driver [ 1.364929] ohci-platform: OHCI generic platform driver [ 1.364950] uhci_hcd: USB Universal Host Controller Interface driver [ 1.364996] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.365017] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.365350] i8042: Warning: Keylock active [ 1.365491] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.365599] mousedev: PS/2 mouse device common for all mice [ 1.365773] rtc_cmos 00:04: RTC can wake from S4 [ 1.365925] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.365970] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.366023] device-mapper: uevent: version 1.0.3 [ 1.366089] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.366121] ledtrig-cpu: registered to indicate activity on CPUs [ 1.366139] EFI Variables Facility v0.08 2004-May-17 [ 1.369368] NET: Registered protocol family 10 [ 1.369528] NET: Registered protocol family 17 [ 1.369549] Key type dns_resolver registered [ 1.369725] microcode: CPU0 sig=0x506c9, pf=0x1, revision=0xe [ 1.369752] microcode: CPU1 sig=0x506c9, pf=0x1, revision=0xe [ 1.369774] microcode: CPU2 sig=0x506c9, pf=0x1, revision=0xe [ 1.369799] microcode: CPU3 sig=0x506c9, pf=0x1, revision=0xe [ 1.369854] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.370017] registered taskstats version 1 [ 1.370033] Loading compiled-in X.509 certificates [ 1.371974] Loaded X.509 cert 'Build time autogenerated kernel key: dd9ecf96289de4a65ccac44a28fae143855fb1de' [ 1.375449] Key type trusted registered [ 1.378984] Key type encrypted registered [ 1.380061] AppArmor: AppArmor sha1 policy hashing enabled [ 1.381133] ima: No TPM chip found, activating TPM-bypass! [ 1.382237] evm: HMAC attrs: 0x1 [ 1.383693] Magic number: 4:603:707 [ 1.384849] rtc_cmos 00:04: setting system clock to 2016-06-27 23:39:16 UTC (1467070756) [ 1.386292] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.387379] EDD information not available. [ 1.388503] PM: Hibernation image not present or could not be loaded. [ 1.389166] Freeing unused kernel memory: 1508K (ffffffff81d49000 - ffffffff81ec2000) [ 1.390273] Write protecting the kernel read-only data: 12288k [ 1.391522] Freeing unused kernel memory: 348K (ffff8800017a9000 - ffff880001800000) [ 1.393392] Freeing unused kernel memory: 476K (ffff880001b89000 - ffff880001c00000) [ 1.404093] random: systemd-udevd urandom read with 5 bits of entropy available [ 1.437211] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 1.448818] hidraw: raw HID events driver (C) Jiri Kosina [ 1.456622] pps_core: LinuxPPS API ver. 1 registered [ 1.457740] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.458962] ahci 0000:00:12.0: version 3.0 [ 1.458981] [drm] Initialized drm 1.1.0 20060810 [ 1.460176] PTP clock support registered [ 1.462345] dca service started, version 1.12.1 [ 1.464314] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.465462] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 1.466690] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.467852] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.469498] scsi host0: ahci [ 1.470682] ata1: SATA max UDMA/133 abar m2048@0x92340000 port 0x92340100 irq 122 [ 1.471899] sdhci: Secure Digital Host Controller Interface driver [ 1.471935] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.471939] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 1.472973] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.472976] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported [ 1.473017] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.473018] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.473019] usb usb1: Product: xHCI Host Controller [ 1.473020] usb usb1: Manufacturer: Linux 4.7.0-rc4-nightly+ xhci-hcd [ 1.473020] usb usb1: SerialNumber: 0000:00:15.0 [ 1.482132] sdhci: Copyright(c) Pierre Ossman [ 1.483365] hub 1-0:1.0: USB hub found [ 1.483370] pps pps0: new PPS source ptp0 [ 1.483371] igb 0000:01:00.0: added PHC on eth0 [ 1.483372] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.483373] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:40 [ 1.483374] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.483374] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 1.483455] Setting dangerous option enable_rc6 - tainting kernel [ 1.483457] Setting dangerous option preliminary_hw_support - tainting kernel [ 1.483458] Setting dangerous option enable_guc_submission - tainting kernel [ 1.494513] hub 1-0:1.0: 8 ports detected [ 1.496091] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.497211] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 1.498359] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.499471] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.500577] usb usb2: Product: xHCI Host Controller [ 1.501682] usb usb2: Manufacturer: Linux 4.7.0-rc4-nightly+ xhci-hcd [ 1.502788] usb usb2: SerialNumber: 0000:00:15.0 [ 1.503896] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 1.505036] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.506523] hub 2-0:1.0: USB hub found [ 1.507652] hub 2-0:1.0: 7 ports detected [ 1.509267] [drm:intel_detect_pch] No PCH found. [ 1.509270] [drm:get_allowed_dc_mask] Allowed DC state mask 09 [ 1.509281] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x5a84 rev=0x0a flags=need_gfx_hws,is_broxton,is_preliminary,has_fbc,has_hotplug,has_ddi,has_fpga_dbg, [ 1.509368] [drm:intel_device_info_runtime_init] slice total: 1 [ 1.509369] [drm:intel_device_info_runtime_init] subslice total: 3 [ 1.509370] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 1.509371] [drm:intel_device_info_runtime_init] EU total: 18 [ 1.509372] [drm:intel_device_info_runtime_init] EU per subslice: 6 [ 1.509372] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.509373] [drm:intel_device_info_runtime_init] has subslice power gating: y [ 1.509374] [drm:intel_device_info_runtime_init] has EU power gating: y [ 1.509375] [drm:intel_device_info_runtime_init] ppgtt mode: 3 [ 1.509409] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.509410] [drm] Memory usable by graphics device = 4096M [ 1.510518] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 1.510519] [drm:i915_ggtt_init_hw] GTT stolen size = 64M [ 1.510521] checking generic (80000000 8ca000) vs hw (80000000 10000000) [ 1.510521] fb: switching to inteldrmfb from EFI VGA [ 1.511643] Console: switching to colour dummy device 80x25 [ 1.511688] [drm] Replacing VGA console driver [ 1.511780] [drm:intel_opregion_setup] graphic opregion physical addr: 0x79df2018 [ 1.511784] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.511785] [drm:intel_opregion_setup] ASLE supported [ 1.511787] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA) [ 1.511808] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.511811] [drm] Driver supports precise vblank timestamp query. [ 1.511813] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 1.511815] [drm:intel_bios_init] VBT signature "$VBT BROXTON ", BDB version 207 [ 1.511816] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 1.511817] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.511818] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [ 1.511819] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [ 1.511820] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.511821] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.511823] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.511824] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 1.511825] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180 [ 1.511826] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 1.511827] [drm:parse_device_mapping] Expected child device config size for VBT version 207 not known; assuming 38 [ 1.511828] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.511829] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.511830] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.511831] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.511832] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8 [ 1.511833] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.511834] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8 [ 1.511857] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.511860] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.511862] [drm:intel_power_well_enable] enabling power well 1 [ 1.511865] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz [ 1.511877] [drm:intel_power_well_enable] enabling always-on [ 1.511877] [drm:intel_power_well_enable] enabling DC off [ 1.511878] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.511880] [drm:intel_power_well_enable] enabling power well 2 [ 1.511881] [drm:intel_power_well_enable] enabling dpio-common-a [ 1.513133] [drm:intel_power_well_enable] enabling dpio-common-bc [ 1.513141] [drm:bxt_ddi_phy_init] DDI PHY 0 already enabled, won't reprogram it [ 1.513142] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.513161] [drm:bxt_ddi_phy_init] DDI PHY 1 already enabled, won't reprogram it [ 1.513170] [drm:bxt_ddi_phy_init] DDI PHY 0 already enabled, won't reprogram it [ 1.513173] [drm:intel_csr_ucode_init] Loading i915/bxt_dmc_ver1.bin [ 1.513277] [drm] Finished loading i915/bxt_dmc_ver1.bin (v1.7) [ 1.513419] [drm:intel_fbc_init] Sanitized enable_fbc value: 0 [ 1.516381] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 1.516692] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 9 (9.0 usec) [ 1.516694] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 9 (9.0 usec) [ 1.516695] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 10 (10.0 usec) [ 1.516696] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 24 (24.0 usec) [ 1.516697] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 24 (24.0 usec) [ 1.516698] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 24 (24.0 usec) [ 1.516698] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 24 (24.0 usec) [ 1.516699] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 24 (24.0 usec) [ 1.516700] [drm:intel_modeset_init] 3 display pipes available. [ 1.516712] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz [ 1.516714] [drm:intel_update_max_cdclk] Max CD clock rate: 624000 kHz [ 1.516714] [drm:intel_update_max_cdclk] Max dotclock rate: 624000 kHz [ 1.516717] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.517021] [drm:intel_ddi_init] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing [ 1.517023] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.517033] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000 [ 1.517035] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.517036] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 1.517036] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.517038] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 [ 1.517039] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking [ 1.517157] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.517328] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.517444] [drm:intel_dp_get_dpcd] EDP DPCD : 02 fb c7 [ 1.517445] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.517447] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.517448] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.517449] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.518449] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.518451] [drm:intel_dp_drrs_init] Downclock mode is not found. DRRS not supported [ 1.518453] [drm:get_backlight_max_vbt] VBT defined backlight frequency 200 Hz [ 1.518454] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, disabled, brightness 0/96000 [ 1.518461] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.518472] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 1.518479] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.518484] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 1.518487] [drm:intel_dsi_init] [ 1.518498] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 1.518500] [drm:intel_modeset_readout_hw_state] [CRTC:31:pipe B] hw state readout: disabled [ 1.518501] [drm:intel_modeset_readout_hw_state] [CRTC:36:pipe C] hw state readout: disabled [ 1.518503] [drm:intel_modeset_readout_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000000, on 0 [ 1.518508] [drm:intel_modeset_readout_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000001, on 1 [ 1.518509] [drm:intel_modeset_readout_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0 [ 1.518510] [drm:intel_modeset_readout_hw_state] [ENCODER:38:DDI A] hw state readout: disabled, pipe A [ 1.518515] [drm:intel_modeset_readout_hw_state] [ENCODER:46:DDI B] hw state readout: enabled, pipe A [ 1.518516] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP-MST A] hw state readout: disabled, pipe A [ 1.518517] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP-MST B] hw state readout: disabled, pipe B [ 1.518518] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP-MST C] hw state readout: disabled, pipe C [ 1.518519] [drm:intel_modeset_readout_hw_state] [ENCODER:53:DDI C] hw state readout: disabled, pipe A [ 1.518520] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP-MST A] hw state readout: disabled, pipe A [ 1.518521] [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP-MST B] hw state readout: disabled, pipe B [ 1.518522] [drm:intel_modeset_readout_hw_state] [ENCODER:57:DP-MST C] hw state readout: disabled, pipe C [ 1.518524] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:eDP-1] hw state readout: disabled [ 1.518525] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-1] hw state readout: enabled [ 1.518527] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled [ 1.518528] [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:DP-2] hw state readout: disabled [ 1.518529] [drm:intel_modeset_readout_hw_state] [CONNECTOR:58:HDMI-A-2] hw state readout: disabled [ 1.518540] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff880467702800 for pipe A [ 1.518541] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.518541] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.518543] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.518544] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1794230, gmch_n: 8388608, link_m: 149519, link_n: 524288, tu: 64 [ 1.518545] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.518546] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.518546] [drm:intel_dump_pipe_config] requested mode: [ 1.518548] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 153999 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 1.518549] [drm:intel_dump_pipe_config] adjusted mode: [ 1.518550] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 153999 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 1.518552] [drm:intel_dump_crtc_timings] crtc timings: 153999 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9 [ 1.518552] [drm:intel_dump_pipe_config] port clock: 540000 [ 1.518553] [drm:intel_dump_pipe_config] pipe src size: 1920x1200 [ 1.518554] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 1.518555] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.518556] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x078004b0, enabled [ 1.518557] [drm:intel_dump_pipe_config] ips: 0 [ 1.518557] [drm:intel_dump_pipe_config] double wide: 0 [ 1.518559] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58 [ 1.518560] [drm:intel_dump_pipe_config] planes on this crtc [ 1.518561] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] disabled, scaler_id = -1 [ 1.518562] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 1.518563] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 1.518563] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 1.518565] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][setup_hw_state] config ffff880467703800 for pipe B [ 1.518566] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.518566] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.518567] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.518568] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.518569] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.518570] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.518571] [drm:intel_dump_pipe_config] requested mode: [ 1.518572] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.518573] [drm:intel_dump_pipe_config] adjusted mode: [ 1.518574] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.518575] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.518576] [drm:intel_dump_pipe_config] port clock: 0 [ 1.518577] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.518578] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.518579] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.518579] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.518580] [drm:intel_dump_pipe_config] ips: 0 [ 1.518589] [drm:intel_dump_pipe_config] double wide: 0 [ 1.518590] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.518591] [drm:intel_dump_pipe_config] planes on this crtc [ 1.518592] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] disabled, scaler_id = -1 [ 1.518593] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 1.518594] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 1.518595] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 1.518596] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][setup_hw_state] config ffff880467704800 for pipe C [ 1.518597] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.518598] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.518599] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.518600] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.518601] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.518601] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.518602] [drm:intel_dump_pipe_config] requested mode: [ 1.518603] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.518604] [drm:intel_dump_pipe_config] adjusted mode: [ 1.518605] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.518607] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.518607] [drm:intel_dump_pipe_config] port clock: 0 [ 1.518608] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.518609] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.518610] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.518611] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.518611] [drm:intel_dump_pipe_config] ips: 0 [ 1.518612] [drm:intel_dump_pipe_config] double wide: 0 [ 1.518613] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.518614] [drm:intel_dump_pipe_config] planes on this crtc [ 1.518615] [drm:intel_dump_pipe_config] [PLANE:34:plane 1C] disabled, scaler_id = -1 [ 1.518616] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = -1 [ 1.518617] [drm:intel_dump_pipe_config] [PLANE:37:plane 2C] disabled, scaler_id = -1 [ 1.518633] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1200@32, offset=0, pitch 7680, size 0x8ca000 [ 1.518634] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=8ca000 [ 1.518637] [drm:i915_pages_create_for_stolen] offset=0x0, size=9216000 [ 1.518639] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880074880000 [ 1.518641] [drm:intel_guc_init] GuC firmware pending, path i915/bxt_guc_ver8_7.bin [ 1.518641] [drm:guc_fw_fetch] before requesting firmware: GuC fw fetch status PENDING [ 1.518675] [drm:guc_fw_fetch] fetch GuC fw from i915/bxt_guc_ver8_7.bin succeeded, fw ffff880467455240 [ 1.518677] [drm:guc_fw_fetch] firmware version 8.7 OK (minimum 8.7) [ 1.518714] [drm:guc_fw_fetch] GuC fw fetch status SUCCESS, obj ffff880074880240 [ 1.518788] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 8ca000 [ 1.518789] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [8ca000, fffff000] [ 1.518825] [drm:i915_gem_context_init] LR context support initialized [ 1.518832] [drm:intel_init_pipe_control] render ring pipe control offset: 0x008cb000 [ 1.518837] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.518838] [drm:i915_pages_create_for_stolen] offset=0x8ca000, size=16384 [ 1.518861] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.518862] [drm:i915_pages_create_for_stolen] offset=0x8ce000, size=16384 [ 1.518869] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.518871] [drm:i915_pages_create_for_stolen] offset=0x8d2000, size=16384 [ 1.518877] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.518879] [drm:i915_pages_create_for_stolen] offset=0x8d6000, size=16384 [ 1.518887] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1.518909] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1.518927] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1.518945] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1.518962] [drm:intel_guc_setup] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load NONE [ 1.518964] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load PENDING [ 1.521054] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x8002f0ec [ 1.521056] [drm:guc_ucode_xfer_dma] returning 0 [ 1.521057] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load SUCCESS [ 1.521068] [drm:select_doorbell_register] assigned normal priority doorbell id 0x0 [ 1.521070] [drm:select_doorbell_cacheline] selected doorbell cacheline 0x0, next 0x40, linesize 64 [ 1.521081] [drm:guc_client_alloc] new priority 2 client ffff88046d3acb80: ctx_index 0 [ 1.521082] [drm:guc_client_alloc] doorbell id 0, cacheline offset 0x0 [ 1.524074] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz [ 1.524080] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 1.524081] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 1.524081] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 1.524082] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 1.524084] [drm:intel_fbdev_init_bios] pipe A area: 1920x1200, bpp: 32, size: 9216000 [ 1.524085] [drm:intel_fbdev_init_bios] fb big enough for plane A (9216000 >= 9216000) [ 1.524085] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 1.524086] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 1.524087] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 1.524090] [drm:bxt_hpd_irq_setup] Invert bit setting: hp_ctl:18001819 hp_port:38 [ 1.524243] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.524245] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [ 1.524280] [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1 [ 1.524325] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-2 [ 1.524623] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 1.525712] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.525875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.525943] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.525944] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.525964] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev a) [ 1.526036] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.526057] sdhci-pci 0000:00:1b.0: failed to setup card detect gpio [ 1.526121] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.526239] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] status updated from unknown to connected [ 1.526247] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.526249] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.526251] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.526252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.526253] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.526367] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.526450] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.526452] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.526453] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.526454] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.526641] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.526752] [drm:drm_dp_i2c_do_msg] native defer [ 1.527120] [drm:drm_dp_i2c_do_msg] native defer [ 1.527884] [drm:drm_dp_i2c_do_msg] native defer [ 1.528646] [drm:drm_dp_i2c_do_msg] native defer [ 1.529408] [drm:drm_dp_i2c_do_msg] native defer [ 1.530126] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit [ 1.530140] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev a) [ 1.530162] [drm:drm_dp_i2c_do_msg] native defer [ 1.530928] [drm:drm_dp_i2c_do_msg] native defer [ 1.531691] [drm:drm_dp_i2c_do_msg] native defer [ 1.532454] [drm:drm_dp_i2c_do_msg] native defer [ 1.533247] [drm:drm_dp_i2c_do_msg] native defer [ 1.534034] [drm:drm_dp_i2c_do_msg] native defer [ 1.534291] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 1.534305] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev a) [ 1.534828] [drm:drm_dp_i2c_do_msg] native defer [ 1.535621] [drm:drm_dp_i2c_do_msg] native defer [ 1.536417] [drm:drm_dp_i2c_do_msg] native defer [ 1.537206] [drm:drm_dp_i2c_do_msg] native defer [ 1.537990] [drm:drm_dp_i2c_do_msg] native defer [ 1.538419] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit [ 1.541090] [drm:drm_dp_i2c_do_msg] native defer [ 1.541856] [drm:drm_dp_i2c_do_msg] native defer [ 1.542627] [drm:drm_dp_i2c_do_msg] native defer [ 1.543389] [drm:drm_dp_i2c_do_msg] native defer [ 1.544147] [drm:drm_dp_i2c_do_msg] native defer [ 1.544935] [drm:drm_dp_i2c_do_msg] native defer [ 1.545731] [drm:drm_dp_i2c_do_msg] native defer [ 1.546536] [drm:drm_dp_i2c_do_msg] native defer [ 1.547330] [drm:drm_dp_i2c_do_msg] native defer [ 1.547869] [drm:drm_dp_i2c_do_msg] native defer [ 1.548670] [drm:drm_dp_i2c_do_msg] native defer [ 1.549471] [drm:drm_dp_i2c_do_msg] native defer [ 1.550270] [drm:drm_dp_i2c_do_msg] native defer [ 1.550925] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 1.551056] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] status updated from unknown to connected [ 1.551083] [drm:drm_edid_to_eld] ELD monitor DELL 2408WFP [ 1.551085] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.551085] [drm:drm_edid_to_eld] ELD size 36, SAD count 1 [ 1.551094] [drm:drm_mode_debug_printmodeline] Modeline 83:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [ 1.551095] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL [ 1.551096] [drm:drm_mode_debug_printmodeline] Modeline 84:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [ 1.551097] [drm:drm_mode_prune_invalid] Not using 720x576i mode: H_ILLEGAL [ 1.551098] [drm:drm_mode_debug_printmodeline] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a [ 1.551099] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL [ 1.551102] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.551104] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.551105] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.551106] [drm:drm_mode_debug_printmodeline] Modeline 86:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.551108] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.551109] [drm:drm_mode_debug_printmodeline] Modeline 87:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.551111] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.551112] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.551114] [drm:drm_mode_debug_printmodeline] Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.551115] [drm:drm_mode_debug_printmodeline] Modeline 69:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.551117] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.551118] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.551120] [drm:drm_mode_debug_printmodeline] Modeline 75:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.551121] [drm:drm_mode_debug_printmodeline] Modeline 76:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.551122] [drm:drm_mode_debug_printmodeline] Modeline 77:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.551124] [drm:drm_mode_debug_printmodeline] Modeline 70:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.551125] [drm:drm_mode_debug_printmodeline] Modeline 89:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.551127] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.551128] [drm:drm_mode_debug_printmodeline] Modeline 71:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.551130] [drm:drm_mode_debug_printmodeline] Modeline 90:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.551131] [drm:drm_mode_debug_printmodeline] Modeline 72:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.551132] [drm:drm_mode_debug_printmodeline] Modeline 73:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.551134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.551135] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.551177] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.551178] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.551218] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.551219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.551261] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.551261] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.551301] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.551303] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected [ 1.551304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.551305] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.551305] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.551422] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00 [ 1.551509] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.551511] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.551512] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.551513] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.556836] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] status updated from unknown to connected [ 1.556842] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.556845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.556847] [drm:drm_mode_debug_printmodeline] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.556848] [drm:drm_mode_debug_printmodeline] Modeline 84:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.556850] [drm:drm_mode_debug_printmodeline] Modeline 85:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.556851] [drm:drm_mode_debug_printmodeline] Modeline 82:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.556853] [drm:drm_mode_debug_printmodeline] Modeline 83:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1.556854] [drm:drm_mode_debug_printmodeline] Modeline 81:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.556855] [drm:drm_mode_debug_printmodeline] Modeline 80:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.556857] [drm:drm_mode_debug_printmodeline] Modeline 94:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.556858] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.556860] [drm:drm_mode_debug_printmodeline] Modeline 92:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.556861] [drm:drm_mode_debug_printmodeline] Modeline 93:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.556862] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.556863] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.556904] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.556905] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.556945] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.556946] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.556987] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.556988] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.557028] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.557029] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] status updated from unknown to disconnected [ 1.557030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.557032] [drm:drm_setup_crtcs] [ 1.557033] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.557034] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.557035] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.557036] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.557036] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.557038] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping [ 1.557039] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.557040] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.557041] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:26:pipe A]: 1920x1200 [ 1.557042] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.557043] [drm:intel_fb_initial_config] connector DP-2 has no encoder or crtc, skipping [ 1.557044] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.557044] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 1.557045] [drm:intel_fb_initial_config] Enabled: 1, detected: 3 [ 1.557046] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.557047] [drm:drm_target_preferred] looking for cmdline mode on connector 39 [ 1.557048] [drm:drm_target_preferred] looking for preferred mode on connector 39 0 [ 1.557049] [drm:drm_target_preferred] found mode 1920x1080 [ 1.557049] [drm:drm_target_preferred] looking for cmdline mode on connector 47 [ 1.557050] [drm:drm_target_preferred] looking for preferred mode on connector 47 0 [ 1.557051] [drm:drm_target_preferred] found mode 1920x1200 [ 1.557052] [drm:drm_target_preferred] looking for cmdline mode on connector 54 [ 1.557052] [drm:drm_target_preferred] looking for preferred mode on connector 54 0 [ 1.557053] [drm:drm_target_preferred] found mode 1920x1080 [ 1.557054] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.557059] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.557060] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 31 (0,0) [ 1.557061] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 1.557063] [drm:intelfb_create] re-using BIOS fb [ 1.557066] [drm:intelfb_create] allocated 1920x1200 fb: 0x00000000, bo ffff880074880000 [ 1.557092] [drm:drm_fb_helper_hotplug_event] [ 1.557094] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.557094] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.557111] fbcon: inteldrmfb (fb0) is primary device [ 1.557193] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.557272] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.557361] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.557362] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.557363] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.557364] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.557364] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.557475] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.557556] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.557558] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.557558] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.557559] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.557749] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.557862] [drm:drm_edid_to_eld] ELD monitor DELL 2408WFP [ 1.557862] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.557863] [drm:drm_edid_to_eld] ELD size 36, SAD count 1 [ 1.557871] [drm:drm_mode_debug_printmodeline] Modeline 119:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [ 1.557872] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL [ 1.557873] [drm:drm_mode_debug_printmodeline] Modeline 120:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [ 1.557873] [drm:drm_mode_prune_invalid] Not using 720x576i mode: H_ILLEGAL [ 1.557874] [drm:drm_mode_debug_printmodeline] Modeline 132:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a [ 1.557875] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL [ 1.557876] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.557877] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.557878] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.557879] [drm:drm_mode_debug_printmodeline] Modeline 86:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.557880] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.557881] [drm:drm_mode_debug_printmodeline] Modeline 87:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.557882] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.557883] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.557884] [drm:drm_mode_debug_printmodeline] Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.557885] [drm:drm_mode_debug_printmodeline] Modeline 69:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.557886] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.557888] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.557889] [drm:drm_mode_debug_printmodeline] Modeline 75:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.557890] [drm:drm_mode_debug_printmodeline] Modeline 76:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.557891] [drm:drm_mode_debug_printmodeline] Modeline 77:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.557892] [drm:drm_mode_debug_printmodeline] Modeline 70:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.557893] [drm:drm_mode_debug_printmodeline] Modeline 89:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.557894] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.557895] [drm:drm_mode_debug_printmodeline] Modeline 71:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.557896] [drm:drm_mode_debug_printmodeline] Modeline 90:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.557897] [drm:drm_mode_debug_printmodeline] Modeline 72:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.557898] [drm:drm_mode_debug_printmodeline] Modeline 73:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.557898] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.557899] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.557940] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.557940] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.557979] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.557980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.558019] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.558020] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.558059] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.558060] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.558061] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.558061] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.558178] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00 [ 1.558264] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.558265] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.558266] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.558266] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.558368] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.558371] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.558372] [drm:drm_mode_debug_printmodeline] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.558373] [drm:drm_mode_debug_printmodeline] Modeline 84:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.558374] [drm:drm_mode_debug_printmodeline] Modeline 85:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.558375] [drm:drm_mode_debug_printmodeline] Modeline 82:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.558376] [drm:drm_mode_debug_printmodeline] Modeline 83:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1.558377] [drm:drm_mode_debug_printmodeline] Modeline 81:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.558378] [drm:drm_mode_debug_printmodeline] Modeline 80:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.558379] [drm:drm_mode_debug_printmodeline] Modeline 94:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.558380] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.558381] [drm:drm_mode_debug_printmodeline] Modeline 92:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.558382] [drm:drm_mode_debug_printmodeline] Modeline 93:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.558383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.558383] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.558423] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.558424] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.558463] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.558463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.558503] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.558503] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.558542] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.558543] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.558546] [drm:drm_setup_crtcs] [ 1.558546] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.558547] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.558547] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.558548] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.558548] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.558549] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping [ 1.558549] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.558550] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.558551] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:26:pipe A]: 1920x1200 [ 1.558551] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.558551] [drm:intel_fb_initial_config] connector DP-2 has no encoder or crtc, skipping [ 1.558552] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.558552] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 1.558553] [drm:intel_fb_initial_config] Enabled: 1, detected: 3 [ 1.558553] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.558553] [drm:drm_target_preferred] looking for cmdline mode on connector 39 [ 1.558554] [drm:drm_target_preferred] looking for preferred mode on connector 39 0 [ 1.558554] [drm:drm_target_preferred] found mode 1920x1080 [ 1.558555] [drm:drm_target_preferred] looking for cmdline mode on connector 47 [ 1.558555] [drm:drm_target_preferred] looking for preferred mode on connector 47 0 [ 1.558555] [drm:drm_target_preferred] found mode 1920x1200 [ 1.558556] [drm:drm_target_preferred] looking for cmdline mode on connector 54 [ 1.558556] [drm:drm_target_preferred] looking for preferred mode on connector 54 0 [ 1.558557] [drm:drm_target_preferred] found mode 1920x1080 [ 1.558557] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.558561] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.558562] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 31 (0,0) [ 1.558562] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 1.558575] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 1.558575] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.558577] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 1.558578] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.558578] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 1.558580] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 1.558581] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 1.558581] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.558583] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880074876000 for pipe A [ 1.558583] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1.558583] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.558584] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.558585] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 1.558586] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.558586] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.558586] [drm:intel_dump_pipe_config] requested mode: [ 1.558587] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.558588] [drm:intel_dump_pipe_config] adjusted mode: [ 1.558589] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.558590] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 1.558590] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.558590] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.558591] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.558592] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.558592] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.558592] [drm:intel_dump_pipe_config] ips: 0 [ 1.558593] [drm:intel_dump_pipe_config] double wide: 0 [ 1.558594] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58 [ 1.558594] [drm:intel_dump_pipe_config] planes on this crtc [ 1.558596] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 1.558597] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1200 format = XR24 little-endian (0x34325258) [ 1.558597] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1200 dst 0x0+1920+1200 [ 1.558597] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 1.558598] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 1.558598] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 1.558599] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 1.558600] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.558600] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 154000KHz [ 1.558602] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1.558602] [drm:intel_dp_compute_config] DP link bw required 369600 available 518400 [ 1.558603] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.558604] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][modeset] config ffff880074876800 for pipe B [ 1.558604] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.558604] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.558605] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.558606] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64 [ 1.558606] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.558607] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1.558607] [drm:intel_dump_pipe_config] requested mode: [ 1.558608] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.558608] [drm:intel_dump_pipe_config] adjusted mode: [ 1.558609] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.558610] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9 [ 1.558611] [drm:intel_dump_pipe_config] port clock: 162000 [ 1.558611] [drm:intel_dump_pipe_config] pipe src size: 1920x1200 [ 1.558612] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.558612] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.558613] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.558613] [drm:intel_dump_pipe_config] ips: 0 [ 1.558613] [drm:intel_dump_pipe_config] double wide: 0 [ 1.558614] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.558615] [drm:intel_dump_pipe_config] planes on this crtc [ 1.558615] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] disabled, scaler_id = -1 [ 1.558615] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 1.558616] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 1.558616] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 1.558617] [drm:connected_sink_compute_bpp] [CONNECTOR:54:DP-2] checking for sink bpp constrains [ 1.558617] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.558618] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1.558619] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1.558619] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1.558620] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.558621] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][modeset] config ffff880074877000 for pipe C [ 1.558621] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.558621] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.558622] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.558623] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1.558623] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.558624] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.558624] [drm:intel_dump_pipe_config] requested mode: [ 1.558625] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.558625] [drm:intel_dump_pipe_config] adjusted mode: [ 1.558626] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.558627] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1.558628] [drm:intel_dump_pipe_config] port clock: 162000 [ 1.558628] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.558629] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.558629] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.558630] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.558630] [drm:intel_dump_pipe_config] ips: 0 [ 1.558630] [drm:intel_dump_pipe_config] double wide: 0 [ 1.558631] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.558631] [drm:intel_dump_pipe_config] planes on this crtc [ 1.558632] [drm:intel_dump_pipe_config] [PLANE:34:plane 1C] disabled, scaler_id = -1 [ 1.558632] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = -1 [ 1.558633] [drm:intel_dump_pipe_config] [PLANE:37:plane 2C] disabled, scaler_id = -1 [ 1.558634] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 1.558636] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 1.558637] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 1.558637] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 1.558639] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL A [ 1.558639] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 1.558640] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 1.558641] [drm:bxt_get_dpll] [CRTC:31:pipe B] using pre-allocated PORT PLL B [ 1.558641] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 1.558642] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 1.558642] [drm:skl_update_scaler] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.558643] [drm:bxt_get_dpll] [CRTC:36:pipe C] using pre-allocated PORT PLL C [ 1.558643] [drm:intel_reference_shared_dpll] using PORT PLL C for pipe C [ 1.558644] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36:pipe C] scaler_user index 2.31 [ 1.558644] [drm:skl_update_scaler] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.558661] [drm:intel_disable_pipe] disabling pipe A [ 1.563430] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 1, on? 1) for crtc 26 [ 1.563436] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 1.563439] [drm:bxt_set_cdclk] Changing CDCLK to 288000 kHz (VCO 1152000 kHz) [ 1.569640] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3f96e7b104c, max_idle_ns: 440795242017 ns [ 1.571473] [drm:intel_update_cdclk] Current CD clock rate: 288000 kHz, VCO: 1152000 kHz, ref: 19200 kHz [ 1.571474] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 1.571474] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 1.571475] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 1.571475] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 1.571476] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 1.571476] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 1.571476] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 1.571477] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 1.571477] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 1.571478] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 1.571479] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 1.571480] [drm:verify_single_dpll_state] PORT PLL A [ 1.571481] [drm:verify_single_dpll_state] PORT PLL B [ 1.571481] [drm:verify_single_dpll_state] PORT PLL C [ 1.571486] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 1.571487] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 1.571508] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.571509] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.617994] mmc1: new HS400 MMC card at address 0001 [ 1.619388] mmcblk1: mmc1:0001 CGND3R 58.2 GiB [ 1.619452] mmcblk1boot0: mmc1:0001 CGND3R partition 1 4.00 MiB [ 1.619531] mmcblk1boot1: mmc1:0001 CGND3R partition 2 4.00 MiB [ 1.619603] mmcblk1rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB [ 1.620219] mmcblk1: p1 p2 p3 p4 [ 1.621373] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.621382] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.624997] ata1.00: ATA-9: INTEL SSDSC2BW080A4, LAFi, max UDMA/133 [ 1.624999] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.631543] ata1.00: configured for UDMA/133 [ 1.633459] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW08 LAFi PQ: 0 ANSI: 5 [ 1.644586] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 0000006a [ 1.644587] [drm:wait_panel_status] Wait complete [ 1.644588] [drm:wait_panel_on] Wait for panel power on [ 1.644589] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 0000006b [ 1.648463] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.648518] sd 0:0:0:0: [sda] Write Protect is off [ 1.648519] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.648537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.648661] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.649305] sda: sda1 sda2 sda3 [ 1.649556] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.663760] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.663761] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.663762] usb 1-2: Product: USB2.0 Hub [ 1.665912] hub 1-2:1.0: USB hub found [ 1.667917] hub 1-2:1.0: 4 ports detected [ 1.705057] [drm:wait_panel_status] Wait complete [ 1.705065] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.705791] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.705791] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.706031] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.706566] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.706609] [drm:skylake_pfit_enable] for crtc_state = ffff880074876000 [ 1.706658] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.706659] [drm:intel_enable_pipe] enabling pipe A [ 1.706669] [drm:intel_edp_backlight_on] [ 1.706670] [drm:intel_panel_enable_backlight] pipe A [ 1.706671] [drm:intel_panel_actually_set_backlight] set backlight PWM = 96000 [ 1.708267] [drm:intel_psr_enable] PSR not supported on this platform [ 1.708267] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1.708289] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31 [ 1.708289] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 1.709044] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.709044] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.710028] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.713325] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.713961] [drm:skylake_pfit_enable] for crtc_state = ffff880074876800 [ 1.714020] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.714022] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1.714023] [drm:intel_enable_pipe] enabling pipe B [ 1.714033] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:DDI B] [ 1.714034] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 36 bytes ELD [ 1.714055] [drm:intel_enable_shared_dpll] enable PORT PLL C (active 4, on? 0) for crtc 36 [ 1.714055] [drm:intel_enable_shared_dpll] enabling PORT PLL C [ 1.717479] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.717479] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.718557] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1.718557] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.718905] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.719446] [drm:intel_dp_set_signal_levels] Using vswing level 2 [ 1.719446] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1.721109] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.721155] [drm:skylake_pfit_enable] for crtc_state = ffff880074877000 [ 1.721211] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.721212] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1.721213] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 1.721214] [drm:intel_enable_pipe] enabling pipe C [ 1.725382] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 1.725385] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 1.725395] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.725399] [drm:verify_single_dpll_state] PORT PLL A [ 1.725406] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 1.725407] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 1.725419] [drm:verify_single_dpll_state] PORT PLL B [ 1.725424] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 1.725426] [drm:verify_crtc_state] [CRTC:36:pipe C] [ 1.725434] [drm:verify_single_dpll_state] PORT PLL C [ 1.725452] [drm:drm_fb_helper_hotplug_event] [ 1.725453] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.725454] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.727448] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.729513] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.729615] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.729617] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.729618] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.729619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.729620] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.731694] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.733774] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.733775] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.733775] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.733776] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.735915] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.738019] [drm:drm_edid_to_eld] ELD monitor DELL 2408WFP [ 1.738020] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.738020] [drm:drm_edid_to_eld] ELD size 36, SAD count 1 [ 1.738029] [drm:drm_mode_debug_printmodeline] Modeline 121:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a [ 1.738030] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL [ 1.738031] [drm:drm_mode_debug_printmodeline] Modeline 122:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a [ 1.738031] [drm:drm_mode_prune_invalid] Not using 720x576i mode: H_ILLEGAL [ 1.738032] [drm:drm_mode_debug_printmodeline] Modeline 134:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a [ 1.738033] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL [ 1.738034] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.738035] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.738036] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.738037] [drm:drm_mode_debug_printmodeline] Modeline 86:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.738038] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.738039] [drm:drm_mode_debug_printmodeline] Modeline 87:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.738040] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.738041] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.738042] [drm:drm_mode_debug_printmodeline] Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.738043] [drm:drm_mode_debug_printmodeline] Modeline 69:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.738045] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.738046] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.738047] [drm:drm_mode_debug_printmodeline] Modeline 75:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.738048] [drm:drm_mode_debug_printmodeline] Modeline 76:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.738049] [drm:drm_mode_debug_printmodeline] Modeline 77:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.738050] [drm:drm_mode_debug_printmodeline] Modeline 70:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.738051] [drm:drm_mode_debug_printmodeline] Modeline 89:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.738052] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.738053] [drm:drm_mode_debug_printmodeline] Modeline 71:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.738054] [drm:drm_mode_debug_printmodeline] Modeline 90:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.738055] [drm:drm_mode_debug_printmodeline] Modeline 72:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.738056] [drm:drm_mode_debug_printmodeline] Modeline 73:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.738056] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.738057] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.740040] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.740041] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.740082] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.740082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.740123] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.740124] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.740163] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.740164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.740165] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.740166] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.740283] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 01 02 00 00 00 00 00 00 [ 1.740371] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.740373] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.740373] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.740374] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.740477] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.740480] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.740481] [drm:drm_mode_debug_printmodeline] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.740482] [drm:drm_mode_debug_printmodeline] Modeline 84:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.740483] [drm:drm_mode_debug_printmodeline] Modeline 85:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.740484] [drm:drm_mode_debug_printmodeline] Modeline 82:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.740485] [drm:drm_mode_debug_printmodeline] Modeline 83:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 [ 1.740486] [drm:drm_mode_debug_printmodeline] Modeline 81:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.740487] [drm:drm_mode_debug_printmodeline] Modeline 80:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.740488] [drm:drm_mode_debug_printmodeline] Modeline 94:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.740489] [drm:drm_mode_debug_printmodeline] Modeline 91:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.740490] [drm:drm_mode_debug_printmodeline] Modeline 92:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.740491] [drm:drm_mode_debug_printmodeline] Modeline 93:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.740492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.740492] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.740533] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.740534] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.740574] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.740574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.740616] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.740616] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.740658] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.740658] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.740661] [drm:drm_setup_crtcs] [ 1.740662] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.740662] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.740663] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.740663] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.740664] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.740665] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.740665] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.740666] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 1.740667] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.740667] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.740668] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:31:pipe B]: 1920x1200 [ 1.740668] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.740669] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 1.740669] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 1.740670] [drm:intel_fb_initial_config] connector DP-2 on [CRTC:36:pipe C]: 1920x1080 [ 1.740670] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.740671] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.740672] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 31 (0,0) [ 1.740673] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 1.740684] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 1.740685] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 1.740686] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 1.743920] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 1.743921] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 1.743921] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 1.748040] Console: switching to colour frame buffer device 240x75 [ 1.748053] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 1.748054] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 1.748055] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 1.752323] usb 1-4: New USB device found, idVendor=0b95, idProduct=7720 [ 1.752324] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.752325] usb 1-4: Product: AX88772 [ 1.752325] usb 1-4: SerialNumber: 00D92D [ 1.757727] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.772955] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd [ 1.812289] usb 1-2.1: New USB device found, idVendor=04b3, idProduct=310c [ 1.812316] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.812340] usb 1-2.1: Product: USB Optical Mouse [ 1.814991] usbcore: registered new interface driver usbhid [ 1.815017] usbhid: USB HID core driver [ 1.816118] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:04B3:310C.0001/input/input5 [ 1.816258] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:15.0-2.1/input0 [ 1.820113] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large: [ 1.820155] clocksource: 'hpet' wd_now: 8864517 wd_last: 802fed2 mask: ffffffff [ 1.820187] clocksource: 'tsc' cs_now: 9b96c3928 cs_last: 99c3196b0 mask: ffffffffffffffff [ 1.862067] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 1.904873] [drm] RC6 on [ 1.960764] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a [ 1.960788] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.011857] usb 1-2.4: new low-speed USB device number 6 using xhci_hcd [ 2.100426] usb 1-2.4: New USB device found, idVendor=03f0, idProduct=0024 [ 2.101829] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.103241] usb 1-2.4: Product: HP Basic USB Keyboard [ 2.104641] usb 1-2.4: Manufacturer: CHICONY [ 2.108129] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:03F0:0024.0002/input/input6 [ 2.163173] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:15.0-2.4/input0 [ 2.411052] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 2.411055] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 3.090895] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.761330] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.762985] systemd[1]: Detected architecture x86-64. [ 5.810695] systemd[1]: Set hostname to . [ 6.037969] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.041621] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.045287] systemd[1]: Created slice User and Session Slice. [ 6.048885] systemd[1]: Created slice System Slice. [ 6.052521] systemd[1]: Created slice system-getty.slice. [ 6.056112] systemd[1]: Reached target Slices. [ 6.059689] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.063336] systemd[1]: Listening on Journal Audit Socket. [ 6.066917] systemd[1]: Reached target Remote File Systems (Pre). [ 6.070500] systemd[1]: Reached target Remote File Systems. [ 6.074070] systemd[1]: Listening on udev Kernel Socket. [ 6.077620] systemd[1]: Reached target Encrypted Volumes. [ 6.081202] systemd[1]: Listening on Syslog Socket. [ 6.084792] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.088396] systemd[1]: Listening on udev Control Socket. [ 6.092053] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.095698] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.099389] systemd[1]: Listening on Journal Socket. [ 6.109098] systemd[1]: Mounting Debug File System... [ 6.113109] systemd[1]: Started Braille Device Support. [ 6.117555] systemd[1]: Starting Load Kernel Modules... [ 6.121120] systemd[1]: Starting Uncomplicated firewall... [ 6.124597] systemd[1]: Started Read required files in advance. [ 6.126454] lp: driver loaded but no devices found [ 6.128080] ppdev: user-space parallel port driver [ 6.131411] systemd[1]: Mounting Huge Pages File System... [ 6.136222] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.140132] systemd[1]: Starting Journal Service... [ 6.144043] systemd[1]: Mounting POSIX Message Queue File System... [ 6.188401] systemd[1]: Mounted Huge Pages File System. [ 6.191433] systemd[1]: Mounted Debug File System. [ 6.194369] systemd[1]: Mounted POSIX Message Queue File System. [ 6.197782] systemd[1]: Started Journal Service. [ 6.255892] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.272999] systemd-journald[267]: Received request to flush runtime journal from PID 1 [ 6.331812] tpm_crb MSFT0101:00: A TPM error (257) occurred continue selftest [ 6.336484] tpm_crb: probe of MSFT0101:00 failed with error 257 [ 6.349971] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.368576] Bluetooth: Core ver 2.21 [ 6.368585] NET: Registered protocol family 31 [ 6.368586] Bluetooth: HCI device and connection manager initialized [ 6.368588] Bluetooth: HCI socket layer initialized [ 6.368589] Bluetooth: L2CAP socket layer initialized [ 6.368593] Bluetooth: SCO socket layer initialized [ 6.373865] Intel(R) Wireless WiFi driver for Linux [ 6.373867] Copyright(c) 2003- 2015 Intel Corporation [ 6.377052] random: nonblocking pool is initialized [ 6.377132] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2 [ 6.377133] iwlwifi 0000:02:00.0: Falling back to user helper [ 6.385596] usbcore: registered new interface driver btusb [ 6.392769] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 6.393189] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 6.404205] SSE version of gcm_enc/dec engaged. [ 6.430828] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=92160/96000 [ 6.430829] [drm:intel_panel_actually_set_backlight] set backlight PWM = 92160 [ 6.467471] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.479243] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 6.487481] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2 [ 6.487482] iwlwifi 0000:02:00.0: Falling back to user helper [ 6.488113] Adding 3994620k swap on /dev/sda3. Priority:-1 extents:1 across:3994620k SSFS [ 6.489171] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.489172] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.489173] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.489174] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.489174] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.489175] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 6.495799] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 6.495800] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 6.495801] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 6.500126] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2 [ 6.500126] iwlwifi 0000:02:00.0: Falling back to user helper [ 6.503948] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2 [ 6.503949] iwlwifi 0000:02:00.0: Falling back to user helper [ 6.504479] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2 [ 6.504480] iwlwifi 0000:02:00.0: Falling back to user helper [ 6.504685] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 6.504686] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 6.504687] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 6.505336] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7 [ 6.505383] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8 [ 6.505599] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9 [ 6.505676] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10 [ 6.505714] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11 [ 6.506195] iwlwifi 0000:02:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm [ 6.524813] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 6.526928] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 6.527114] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 6.550107] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.551252] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 6.599851] audit: type=1400 audit(1467070777.515:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=540 comm="apparmor_parser" [ 6.602187] audit: type=1400 audit(1467070777.515:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=537 comm="apparmor_parser" [ 6.602190] audit: type=1400 audit(1467070777.515:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=537 comm="apparmor_parser" [ 6.602192] audit: type=1400 audit(1467070777.515:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=537 comm="apparmor_parser" [ 6.602194] audit: type=1400 audit(1467070777.515:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=537 comm="apparmor_parser" [ 6.603413] audit: type=1400 audit(1467070777.531:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=536 comm="apparmor_parser" [ 6.603416] audit: type=1400 audit(1467070777.531:8): apparmor="STATUS" operation="profile_load" name="chromium" pid=536 comm="apparmor_parser" [ 6.603660] audit: type=1400 audit(1467070777.531:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=546 comm="apparmor_parser" [ 6.604500] audit: type=1400 audit(1467070777.535:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=548 comm="apparmor_parser" [ 6.605794] audit: type=1400 audit(1467070777.535:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=547 comm="apparmor_parser" [ 6.747574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.747577] Bluetooth: BNEP filters: protocol multicast [ 6.747579] Bluetooth: BNEP socket layer initialized [ 6.841259] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 6.864073] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 6.867489] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6.868791] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 6.868958] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 6.890403] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 6.890586] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 6.897177] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 6.897305] asix 1-4:1.0 eth0: register 'asix' at usb-0000:00:15.0-4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:c2:b6 [ 6.897502] usbcore: registered new interface driver asix [ 6.899315] asix 1-4:1.0 enx00106031c2b6: renamed from eth0 [ 6.912747] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 6.912887] asix 1-4:1.0 enx00106031c2b6: link down [ 6.913152] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 6.915895] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 6.926415] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2b6: link is not ready [ 6.968116] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 7.341187] IPv6: ADDRCONF(NETDEV_CHANGE): enx00106031c2b6: link becomes ready [ 7.341374] asix 1-4:1.0 enx00106031c2b6: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 9.696220] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 9.696221] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 9.696222] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 16.764284] kms_cursor_legacy: executing [ 16.764346] [drm:i915_gem_open] [ 16.764404] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 16.764406] [drm:i915_pages_create_for_stolen] offset=0x8da000, size=16384 [ 16.764466] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 16.764468] [drm:i915_pages_create_for_stolen] offset=0x8de000, size=16384 [ 16.764478] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 16.764479] [drm:i915_pages_create_for_stolen] offset=0x8e2000, size=16384 [ 16.764490] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 16.764491] [drm:i915_pages_create_for_stolen] offset=0x8e6000, size=16384 [ 16.764796] [drm:i915_gem_open] [ 16.764910] kms_cursor_legacy: starting subtest basic-flip-vs-cursor [ 16.764952] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 16.764954] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 16.764956] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 16.765015] [drm:drm_mode_addfb2] [FB:101] [ 16.765030] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] [ 16.765032] [drm:drm_mode_setcrtc] [CONNECTOR:47:DP-1] [ 16.765038] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 16.765039] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 16.765041] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 78750KHz [ 16.765044] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 2 clock 162000 bpp 24 [ 16.765045] [drm:intel_dp_compute_config] DP link bw required 189000 available 259200 [ 16.765046] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 16.765048] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880469240000 for pipe A [ 16.765048] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 16.765049] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 16.765050] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 16.765052] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 3058346, gmch_n: 4194304, link_m: 127431, link_n: 262144, tu: 64 [ 16.765053] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 16.765054] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 16.765054] [drm:intel_dump_pipe_config] requested mode: [ 16.765056] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 16.765057] [drm:intel_dump_pipe_config] adjusted mode: [ 16.765058] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 16.765060] [drm:intel_dump_crtc_timings] crtc timings: 78750 1024 1040 1136 1312 768 769 772 800, type: 0x40 flags: 0x5 [ 16.765060] [drm:intel_dump_pipe_config] port clock: 162000 [ 16.765061] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 16.765062] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 16.765063] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 16.765064] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 16.765065] [drm:intel_dump_pipe_config] ips: 0 [ 16.765066] [drm:intel_dump_pipe_config] double wide: 0 [ 16.765067] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 16.765068] [drm:intel_dump_pipe_config] planes on this crtc [ 16.765069] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 16.765070] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1200 format = XR24 little-endian (0x34325258) [ 16.765072] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 16.765073] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] enabled [ 16.765074] [drm:intel_dump_pipe_config] FB:96, fb = 64x64 format = AR24 little-endian (0x34325241) [ 16.765075] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+64+64 dst 0x0+64+64 [ 16.765076] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 16.765077] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 16.765078] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 16.765080] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 16.765082] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 16.765084] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL B [ 16.765084] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe A [ 16.765086] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 16.765087] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 16.765719] [drm:intel_edp_backlight_off] [ 16.837935] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 16.837945] [drm:intel_disable_pipe] disabling pipe A [ 16.841984] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 16.841987] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 16.842031] [drm:edp_panel_off] Turn eDP port A panel power off [ 16.842033] [drm:wait_panel_off] Wait for panel power off time [ 16.842035] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000060 [ 16.855185] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 16.855187] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 16.855188] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 16.855201] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 16.863764] [drm:wait_panel_status] Wait complete [ 16.863767] [drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 26 [ 16.863773] [drm:intel_disable_shared_dpll] disabling PORT PLL A [ 16.863776] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 16.863789] [drm:intel_disable_pipe] disabling pipe B [ 16.867858] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 2, on? 1) for crtc 31 [ 16.867864] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 16.867867] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 16.867870] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 16.867872] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 16.867873] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 16.867874] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 16.867875] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 16.867876] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 16.867876] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 16.867877] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 16.867878] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 16.867879] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 16.867880] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 16.867882] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 16.867884] [drm:verify_single_dpll_state] PORT PLL A [ 16.867885] [drm:verify_single_dpll_state] PORT PLL B [ 16.867886] [drm:verify_single_dpll_state] PORT PLL C [ 16.867894] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 1, on? 0) for crtc 26 [ 16.867894] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 16.868633] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 16.868634] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 16.880744] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 16.884009] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 16.884051] [drm:skylake_pfit_enable] for crtc_state = ffff880469240000 [ 16.884103] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 16.884105] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 16.884107] [drm:intel_enable_pipe] enabling pipe A [ 16.884114] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:DDI B] [ 16.884115] [drm:hsw_audio_codec_enable] Enable audio codec on pipe A, 36 bytes ELD [ 16.884152] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 16.884154] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 16.887441] [drm:intel_power_well_disable] disabling dpio-common-a [ 16.887445] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 16.887449] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 16.887460] [drm:verify_single_dpll_state] PORT PLL B [ 16.887466] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 17.039534] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 17.128850] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 17.134504] kms_cursor_legacy: exiting, ret=99 [ 17.134542] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 17.134543] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 17.134545] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 17.134546] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 17.134548] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 17.134549] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 17.134550] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 17.134551] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880466dc9000 for pipe A [ 17.134551] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 17.134552] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 17.134552] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 17.134553] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 17.134554] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 17.134554] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 17.134555] [drm:intel_dump_pipe_config] requested mode: [ 17.134556] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 17.134557] [drm:intel_dump_pipe_config] adjusted mode: [ 17.134558] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 17.134558] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 17.134559] [drm:intel_dump_pipe_config] port clock: 270000 [ 17.134559] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 17.134560] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 17.134560] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 17.134561] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 17.134561] [drm:intel_dump_pipe_config] ips: 0 [ 17.134562] [drm:intel_dump_pipe_config] double wide: 0 [ 17.134563] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 17.134563] [drm:intel_dump_pipe_config] planes on this crtc [ 17.134565] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 17.134566] [drm:intel_dump_pipe_config] FB:101, fb = 1024x768 format = XR24 little-endian (0x34325258) [ 17.134566] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1024+768 dst 0x0+1024+768 [ 17.134567] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] enabled [ 17.134568] [drm:intel_dump_pipe_config] FB:96, fb = 64x64 format = AR24 little-endian (0x34325241) [ 17.134568] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+64+64 dst 0x0+64+64 [ 17.134568] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 17.134569] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 17.134570] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 17.134570] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 17.134571] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 154000KHz [ 17.134572] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 17.134573] [drm:intel_dp_compute_config] DP link bw required 369600 available 518400 [ 17.134574] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 17.134574] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][modeset] config ffff880466dc8800 for pipe B [ 17.134575] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 17.134575] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 17.134576] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 17.134576] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64 [ 17.134577] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 17.134578] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 17.134578] [drm:intel_dump_pipe_config] requested mode: [ 17.134579] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 17.134579] [drm:intel_dump_pipe_config] adjusted mode: [ 17.134580] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 17.134581] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9 [ 17.134582] [drm:intel_dump_pipe_config] port clock: 162000 [ 17.134582] [drm:intel_dump_pipe_config] pipe src size: 1920x1200 [ 17.134583] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 17.134583] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 17.134584] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 17.134584] [drm:intel_dump_pipe_config] ips: 0 [ 17.134584] [drm:intel_dump_pipe_config] double wide: 0 [ 17.134585] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 17.134586] [drm:intel_dump_pipe_config] planes on this crtc [ 17.134587] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] enabled [ 17.134588] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1200 format = XR24 little-endian (0x34325258) [ 17.134588] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+0+0 dst 0x0+0+0 [ 17.134588] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 17.134589] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 17.134589] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 17.134590] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 17.134592] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 17.134593] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 17.134594] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 17.134596] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL A [ 17.134596] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 17.134597] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 17.134597] [drm:bxt_get_dpll] [CRTC:31:pipe B] using pre-allocated PORT PLL B [ 17.134598] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 17.134598] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 17.134610] [drm:intel_power_well_enable] enabling dpio-common-a [ 17.142919] [drm:hsw_audio_codec_disable] Disable audio codec on pipe A [ 17.142931] [drm:intel_disable_pipe] disabling pipe A [ 17.146998] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 1, on? 1) for crtc 26 [ 17.147002] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 17.147005] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 17.147006] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 17.147006] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 17.147007] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 17.147007] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 17.147008] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 17.147008] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 17.147009] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 17.147009] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 17.147010] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 17.147011] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 17.147012] [drm:verify_single_dpll_state] PORT PLL A [ 17.147013] [drm:verify_single_dpll_state] PORT PLL B [ 17.147014] [drm:verify_single_dpll_state] PORT PLL C [ 17.147022] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 17.147022] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 17.147047] [drm:edp_panel_on] Turn eDP port A panel power on [ 17.147048] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 17.147051] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060 [ 17.147051] [drm:wait_panel_status] Wait complete [ 17.147052] [drm:wait_panel_on] Wait for panel power on [ 17.147053] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000063 [ 17.173707] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 17.173714] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 17.173714] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 17.173726] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 17.207081] [drm:wait_panel_status] Wait complete [ 17.207083] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 17.207084] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 17.207814] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 17.207814] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 17.208052] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 17.208585] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 17.208627] [drm:skylake_pfit_enable] for crtc_state = ffff880466dc9000 [ 17.208677] [drm:skl_wm_flush_pipe] flush pipe A (pass 1) [ 17.208679] ------------[ cut here ]------------ [ 17.208689] WARNING: CPU: 3 PID: 1304 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/drm_irq.c:1218 drm_wait_one_vblank+0x16a/0x180 [drm] [ 17.208690] vblank not available on crtc 0, ret=-22 [ 17.208707] Modules linked in: bnep asix usbnet mii binfmt_misc arc4 nls_iso8859_1 iwlmvm mac80211 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_intel snd_hda_codec kvm snd_hda_core snd_hwdep irqbypass crct10dif_pclmul crc32_pclmul snd_pcm ghash_clmulni_intel snd_seq_midi snd_seq_midi_event snd_rawmidi aesni_intel snd_seq aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw snd_seq_device snd_timer btusb rfkill_gpio iwlwifi btrtl btbcm btintel bluetooth cfg80211 snd soundcore mei_me mei shpchp tpm_crb intel_pmc_ipc mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid mmc_block sdhci_pci i915 sdhci drm_kms_helper igb xhci_pci syscopyarea sysfillrect dca sysimgblt xhci_hcd fb_sys_fops ptp ahci pps_core [ 17.208709] drm i2c_algo_bit libahci i2c_hid hid video [ 17.208710] CPU: 3 PID: 1304 Comm: kms_cursor_lega Tainted: G U 4.7.0-rc4-nightly+ #2 [ 17.208710] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B25.1605230512 05/23/2016 [ 17.208712] 0000000000000000 ffff88046999f688 ffffffff813af1ec ffff88046999f6d8 [ 17.208713] 0000000000000000 ffff88046999f6c8 ffffffff810793c1 000004c27fc26f29 [ 17.208713] ffff8804676c0000 0000000000000000 ffff8804676c0000 ffff880467b4bc00 [ 17.208714] Call Trace: [ 17.208716] [] dump_stack+0x63/0x87 [ 17.208717] [] __warn+0xd1/0xf0 [ 17.208718] [] warn_slowpath_fmt+0x4f/0x60 [ 17.208725] [] ? drm_vblank_get+0x75/0xd0 [drm] [ 17.208733] [] drm_wait_one_vblank+0x16a/0x180 [drm] [ 17.208749] [] ? chv_write64+0x390/0x390 [i915] [ 17.208763] [] ? chv_write64+0x390/0x390 [i915] [ 17.208775] [] ? skl_wm_flush_pipe+0xd6/0x110 [i915] [ 17.208787] [] skl_update_wm+0x44c/0x600 [i915] [ 17.208799] [] intel_update_watermarks+0x1e/0x30 [i915] [ 17.208814] [] haswell_crtc_enable+0x4e7/0x990 [i915] [ 17.208828] [] intel_atomic_commit_tail+0x11c6/0x1cf0 [i915] [ 17.208841] [] ? intel_runtime_pm_put+0x68/0xc0 [i915] [ 17.208856] [] ? intel_pin_and_fence_fb_obj+0xde/0x140 [i915] [ 17.208861] [] ? drm_atomic_helper_swap_state+0x1d3/0x2e0 [drm_kms_helper] [ 17.208876] [] intel_atomic_commit+0x436/0x570 [i915] [ 17.208884] [] ? drm_atomic_check_only+0x137/0x610 [drm] [ 17.208893] [] ? drm_atomic_set_crtc_for_connector+0x97/0x100 [drm] [ 17.208902] [] drm_atomic_commit+0x37/0x60 [drm] [ 17.208906] [] restore_fbdev_mode+0x145/0x250 [drm_kms_helper] [ 17.208911] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [ 17.208915] [] drm_fb_helper_set_par+0x2c/0x50 [drm_kms_helper] [ 17.208929] [] intel_fbdev_set_par+0x1a/0x60 [i915] [ 17.208931] [] ? put_dec+0x1a/0x80 [ 17.208932] [] fb_set_var+0x191/0x400 [ 17.208933] [] ? select_task_rq_fair+0x609/0x6b0 [ 17.208934] [] ? native_smp_send_reschedule+0x2b/0x40 [ 17.208936] [] ? kmem_cache_alloc_trace+0x19d/0x210 [ 17.208937] [] ? tty_alloc_file+0x23/0x40 [ 17.208938] [] fbcon_blank+0x1bc/0x2b0 [ 17.208939] [] ? do_dentry_open+0x273/0x320 [ 17.208941] [] do_unblank_screen+0xb8/0x1c0 [ 17.208942] [] vt_ioctl+0x1053/0x10d0 [ 17.208943] [] ? putname+0x53/0x60 [ 17.208944] [] tty_ioctl+0x397/0xbb0 [ 17.208945] [] ? kmem_cache_alloc+0x18b/0x1f0 [ 17.208946] [] ? getname_flags+0x4f/0x1f0 [ 17.208947] [] do_vfs_ioctl+0x96/0x590 [ 17.208948] [] SyS_ioctl+0x79/0x90 [ 17.208949] [] do_syscall_64+0x69/0x110 [ 17.208950] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 17.208951] ---[ end trace 14f0fb1e34b2acbe ]--- [ 17.208951] [drm:skl_wm_flush_pipe] flush pipe C (pass 1) [ 17.209616] [drm:intel_enable_pipe] enabling pipe A [ 17.209621] [drm:intel_edp_backlight_on] [ 17.209621] [drm:intel_panel_enable_backlight] pipe A [ 17.209622] [drm:intel_panel_actually_set_backlight] set backlight PWM = 92160 [ 17.209624] [drm:intel_psr_enable] PSR not supported on this platform [ 17.209624] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 17.209643] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31 [ 17.209644] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 17.210394] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 17.210394] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 17.211373] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 17.214656] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 17.214701] [drm:skylake_pfit_enable] for crtc_state = ffff880466dc8800 [ 17.214754] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 17.214756] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 17.214757] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.214758] [drm:intel_enable_pipe] enabling pipe B [ 17.214763] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:DDI B] [ 17.214764] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 36 bytes ELD [ 17.214796] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 17.214797] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 17.214798] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.218936] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 17.218937] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 17.218940] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 17.218944] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 17.218946] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 17.218961] [drm:verify_single_dpll_state] PORT PLL A [ 17.218968] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 17.218970] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 17.218980] [drm:verify_single_dpll_state] PORT PLL B [ 17.223928] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 17.223930] [drm:i915_pages_create_for_stolen] offset=0x8ea000, size=16384 [ 17.223976] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 17.223978] [drm:i915_pages_create_for_stolen] offset=0x8ee000, size=16384 [ 17.223989] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 17.223990] [drm:i915_pages_create_for_stolen] offset=0x8f2000, size=16384 [ 17.224003] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 17.224005] [drm:i915_pages_create_for_stolen] offset=0x8f6000, size=16384 [ 17.225503] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 17.225506] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 17.225507] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 17.903380] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 17.903383] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 57.269867] kms_cursor_legacy: executing [ 57.269947] [drm:i915_gem_open] [ 57.270022] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 57.270025] [drm:i915_pages_create_for_stolen] offset=0x8da000, size=16384 [ 57.270113] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 57.270115] [drm:i915_pages_create_for_stolen] offset=0x8de000, size=16384 [ 57.270129] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 57.270131] [drm:i915_pages_create_for_stolen] offset=0x8e2000, size=16384 [ 57.270144] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 57.270146] [drm:i915_pages_create_for_stolen] offset=0x8e6000, size=16384 [ 57.270477] [drm:i915_gem_open] [ 57.270623] kms_cursor_legacy: starting subtest basic-cursor-vs-flip [ 57.270686] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 57.270689] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 57.270690] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 57.270769] [drm:drm_mode_addfb2] [FB:99] [ 57.270787] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] [ 57.270791] [drm:drm_mode_setcrtc] [CONNECTOR:47:DP-1] [ 57.270799] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 57.270800] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 57.270803] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 78750KHz [ 57.270807] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 2 clock 162000 bpp 24 [ 57.270808] [drm:intel_dp_compute_config] DP link bw required 189000 available 259200 [ 57.270810] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 57.270812] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880466dcc000 for pipe A [ 57.270813] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 57.270814] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 57.270816] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 57.270817] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 3058346, gmch_n: 4194304, link_m: 127431, link_n: 262144, tu: 64 [ 57.270819] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 57.270820] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 57.270821] [drm:intel_dump_pipe_config] requested mode: [ 57.270823] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 57.270824] [drm:intel_dump_pipe_config] adjusted mode: [ 57.270826] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 57.270828] [drm:intel_dump_crtc_timings] crtc timings: 78750 1024 1040 1136 1312 768 769 772 800, type: 0x40 flags: 0x5 [ 57.270830] [drm:intel_dump_pipe_config] port clock: 162000 [ 57.270831] [drm:intel_dump_pipe_config] pipe src size: 1024x768 [ 57.270832] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 57.270834] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 57.270835] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 57.270837] [drm:intel_dump_pipe_config] ips: 0 [ 57.270838] [drm:intel_dump_pipe_config] double wide: 0 [ 57.270840] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 57.270841] [drm:intel_dump_pipe_config] planes on this crtc [ 57.270842] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 57.270844] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1200 format = XR24 little-endian (0x34325258) [ 57.270846] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 57.270847] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] enabled [ 57.270849] [drm:intel_dump_pipe_config] FB:97, fb = 64x64 format = AR24 little-endian (0x34325241) [ 57.270850] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+64+64 dst 0x0+64+64 [ 57.270852] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 57.270853] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 57.270855] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 57.270857] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 57.270860] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 57.270862] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL B [ 57.270864] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe A [ 57.270865] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 57.270868] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 57.271660] [drm:intel_edp_backlight_off] [ 57.341487] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 57.341495] [drm:intel_disable_pipe] disabling pipe A [ 57.343400] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 57.343403] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 57.343447] [drm:edp_panel_off] Turn eDP port A panel power off [ 57.343452] [drm:wait_panel_off] Wait for panel power off time [ 57.343454] [drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control 00000060 [ 57.356499] [drm:wait_panel_status] Wait complete [ 57.356502] [drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 26 [ 57.356509] [drm:intel_disable_shared_dpll] disabling PORT PLL A [ 57.356513] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 57.356528] [drm:intel_disable_pipe] disabling pipe B [ 57.356576] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 57.356577] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 57.356579] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 57.356587] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 57.359985] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 2, on? 1) for crtc 31 [ 57.359991] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 57.359995] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 57.359999] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 57.360001] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 57.360002] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 57.360003] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 57.360004] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 57.360005] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 57.360006] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 57.360007] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 57.360009] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 57.360010] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 57.360012] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 57.360013] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 57.360016] [drm:verify_single_dpll_state] PORT PLL A [ 57.360017] [drm:verify_single_dpll_state] PORT PLL B [ 57.360019] [drm:verify_single_dpll_state] PORT PLL C [ 57.360026] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 1, on? 0) for crtc 26 [ 57.360027] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 57.360772] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 57.360774] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 57.363718] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 57.366469] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 57.366514] [drm:skylake_pfit_enable] for crtc_state = ffff880466dcc000 [ 57.366574] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 57.366577] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 57.366579] [drm:intel_enable_pipe] enabling pipe A [ 57.366586] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:DDI B] [ 57.366587] [drm:hsw_audio_codec_enable] Enable audio codec on pipe A, 36 bytes ELD [ 57.366624] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 57.366627] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 57.369920] [drm:intel_power_well_disable] disabling dpio-common-a [ 57.369926] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 57.369930] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 57.369944] [drm:verify_single_dpll_state] PORT PLL B [ 57.369950] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 57.402455] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe C [ 57.409578] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 57.429413] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 57.472417] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 57.501682] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe C [ 57.508772] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 57.514086] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe C [ 57.528614] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 57.551295] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe C [ 57.570307] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 57.572676] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 57.653303] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 57.673983] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 57.965236] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.008047] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 58.015135] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.097121] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.121925] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.312945] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.327823] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.380506] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.412292] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.434042] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.440957] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.543662] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.593278] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.646188] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 58.671639] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.674238] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.678785] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.700391] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.702458] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.710378] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.720280] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.722299] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.728163] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.910995] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.914072] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.917376] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.920674] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 58.983252] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.119612] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.398672] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.400107] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.439740] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 59.695820] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.697696] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.725627] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.727455] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.730749] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 59.961792] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe C [ 59.968626] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.077093] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.180955] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.205762] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.263671] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.433126] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.742908] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.838293] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.854426] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.855033] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.921718] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.943053] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.953327] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 60.954219] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.101633] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.247690] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.272497] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.290369] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.293801] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.538440] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.559505] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.562633] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.641136] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.642137] kms_cursor_legacy: exiting, ret=99 [ 61.644717] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 61.644717] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 61.644718] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 61.644719] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 61.644720] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 61.644721] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 61.644721] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 61.644722] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880466dcf800 for pipe A [ 61.644722] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 61.644722] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 61.644723] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 61.644723] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 61.644723] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 61.644723] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 61.644724] [drm:intel_dump_pipe_config] requested mode: [ 61.644724] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 61.644724] [drm:intel_dump_pipe_config] adjusted mode: [ 61.644725] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 61.644725] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 61.644726] [drm:intel_dump_pipe_config] port clock: 270000 [ 61.644726] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 61.644726] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 61.644726] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 61.644726] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 61.644727] [drm:intel_dump_pipe_config] ips: 0 [ 61.644727] [drm:intel_dump_pipe_config] double wide: 0 [ 61.644727] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 61.644728] [drm:intel_dump_pipe_config] planes on this crtc [ 61.644728] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 61.644729] [drm:intel_dump_pipe_config] FB:99, fb = 1024x768 format = XR24 little-endian (0x34325258) [ 61.644729] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1024+768 dst 0x0+1024+768 [ 61.644729] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] enabled [ 61.644730] [drm:intel_dump_pipe_config] FB:97, fb = 64x64 format = AR24 little-endian (0x34325241) [ 61.644730] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+64+64 dst 0x0+64+64 [ 61.644730] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 61.644730] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 61.644731] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 61.644731] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 61.644731] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 154000KHz [ 61.644732] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 61.644732] [drm:intel_dp_compute_config] DP link bw required 369600 available 518400 [ 61.644733] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 61.644733] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][modeset] config ffff880466dcf000 for pipe B [ 61.644733] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 61.644733] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 61.644733] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 61.644734] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64 [ 61.644734] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 61.644734] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 61.644734] [drm:intel_dump_pipe_config] requested mode: [ 61.644735] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 61.644735] [drm:intel_dump_pipe_config] adjusted mode: [ 61.644736] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 61.644736] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9 [ 61.644736] [drm:intel_dump_pipe_config] port clock: 162000 [ 61.644736] [drm:intel_dump_pipe_config] pipe src size: 1920x1200 [ 61.644737] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 61.644737] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 61.644737] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 61.644737] [drm:intel_dump_pipe_config] ips: 0 [ 61.644737] [drm:intel_dump_pipe_config] double wide: 0 [ 61.644738] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 61.644738] [drm:intel_dump_pipe_config] planes on this crtc [ 61.644739] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] enabled [ 61.644739] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1200 format = XR24 little-endian (0x34325258) [ 61.644739] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+0+0 dst 0x0+0+0 [ 61.644739] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 61.644739] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 61.644740] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 61.644740] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 61.644742] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.644742] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 61.644742] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 61.644743] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL A [ 61.644744] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 61.644744] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 61.644744] [drm:bxt_get_dpll] [CRTC:31:pipe B] using pre-allocated PORT PLL B [ 61.644744] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 61.644745] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 61.644751] [drm:intel_power_well_enable] enabling dpio-common-a [ 61.646975] [drm:hsw_audio_codec_disable] Disable audio codec on pipe A [ 61.646986] [drm:intel_disable_pipe] disabling pipe A [ 61.649053] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 1, on? 1) for crtc 26 [ 61.649057] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 61.649059] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 61.649059] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 61.649059] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 61.649059] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 61.649059] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 61.649060] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 61.649060] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 61.649060] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 61.649060] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 61.649061] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 61.649061] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 61.649062] [drm:verify_single_dpll_state] PORT PLL A [ 61.649062] [drm:verify_single_dpll_state] PORT PLL B [ 61.649063] [drm:verify_single_dpll_state] PORT PLL C [ 61.649071] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 61.649072] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 61.649092] [drm:edp_panel_on] Turn eDP port A panel power on [ 61.649093] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 61.649095] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060 [ 61.649095] [drm:wait_panel_status] Wait complete [ 61.649096] [drm:wait_panel_on] Wait for panel power on [ 61.649096] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000063 [ 61.675764] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 61.675765] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 61.675766] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 61.675775] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 61.701700] [drm:wait_panel_status] Wait complete [ 61.701702] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 61.701703] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 61.702445] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 61.702445] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 61.702688] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 61.703233] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 61.703277] [drm:skylake_pfit_enable] for crtc_state = ffff880466dcf800 [ 61.703337] [drm:skl_wm_flush_pipe] flush pipe A (pass 1) [ 61.703338] ------------[ cut here ]------------ [ 61.703351] WARNING: CPU: 2 PID: 1365 at /home/shared/kernels/drm-intel-nightly/drivers/gpu/drm/drm_irq.c:1218 drm_wait_one_vblank+0x16a/0x180 [drm] [ 61.703352] vblank not available on crtc 0, ret=-22 [ 61.703375] Modules linked in: bnep asix usbnet mii binfmt_misc arc4 nls_iso8859_1 iwlmvm mac80211 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_intel snd_hda_codec kvm snd_hda_core snd_hwdep irqbypass crct10dif_pclmul crc32_pclmul snd_pcm ghash_clmulni_intel snd_seq_midi snd_seq_midi_event snd_rawmidi aesni_intel snd_seq aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd serio_raw snd_seq_device snd_timer btusb rfkill_gpio iwlwifi btrtl btbcm btintel bluetooth cfg80211 snd soundcore mei_me mei shpchp tpm_crb intel_pmc_ipc mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid mmc_block sdhci_pci i915 sdhci drm_kms_helper igb xhci_pci syscopyarea sysfillrect dca sysimgblt xhci_hcd fb_sys_fops ptp ahci pps_core [ 61.703377] drm i2c_algo_bit libahci i2c_hid hid video [ 61.703379] CPU: 2 PID: 1365 Comm: kms_cursor_lega Tainted: G U W 4.7.0-rc4-nightly+ #2 [ 61.703379] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0138.B25.1605230512 05/23/2016 [ 61.703381] 0000000000000000 ffff88007a2db688 ffffffff813af1ec ffff88007a2db6d8 [ 61.703382] 0000000000000000 ffff88007a2db6c8 ffffffff810793c1 000004c28117893b [ 61.703384] ffff8804676c0000 0000000000000000 ffff8804676c0000 ffff880467b4bc00 [ 61.703384] Call Trace: [ 61.703387] [] dump_stack+0x63/0x87 [ 61.703388] [] __warn+0xd1/0xf0 [ 61.703390] [] warn_slowpath_fmt+0x4f/0x60 [ 61.703400] [] ? drm_vblank_get+0x75/0xd0 [drm] [ 61.703409] [] drm_wait_one_vblank+0x16a/0x180 [drm] [ 61.703431] [] ? chv_write64+0x390/0x390 [i915] [ 61.703451] [] ? chv_write64+0x390/0x390 [i915] [ 61.703467] [] ? skl_wm_flush_pipe+0xd6/0x110 [i915] [ 61.703483] [] skl_update_wm+0x44c/0x600 [i915] [ 61.703500] [] intel_update_watermarks+0x1e/0x30 [i915] [ 61.703520] [] haswell_crtc_enable+0x4e7/0x990 [i915] [ 61.703541] [] intel_atomic_commit_tail+0x11c6/0x1cf0 [i915] [ 61.703558] [] ? intel_runtime_pm_put+0x68/0xc0 [i915] [ 61.703578] [] ? intel_pin_and_fence_fb_obj+0xde/0x140 [i915] [ 61.703585] [] ? drm_atomic_helper_swap_state+0x1d3/0x2e0 [drm_kms_helper] [ 61.703606] [] intel_atomic_commit+0x436/0x570 [i915] [ 61.703618] [] ? drm_atomic_check_only+0x137/0x610 [drm] [ 61.703630] [] ? drm_atomic_set_crtc_for_connector+0x97/0x100 [drm] [ 61.703642] [] drm_atomic_commit+0x37/0x60 [drm] [ 61.703648] [] restore_fbdev_mode+0x145/0x250 [drm_kms_helper] [ 61.703654] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [ 61.703660] [] drm_fb_helper_set_par+0x2c/0x50 [drm_kms_helper] [ 61.703680] [] intel_fbdev_set_par+0x1a/0x60 [i915] [ 61.703682] [] ? put_dec+0x1a/0x80 [ 61.703683] [] fb_set_var+0x191/0x400 [ 61.703684] [] ? select_task_rq_fair+0x609/0x6b0 [ 61.703686] [] ? kmem_cache_alloc_trace+0x19d/0x210 [ 61.703688] [] ? tty_alloc_file+0x23/0x40 [ 61.703690] [] fbcon_blank+0x1bc/0x2b0 [ 61.703691] [] ? do_dentry_open+0x273/0x320 [ 61.703693] [] do_unblank_screen+0xb8/0x1c0 [ 61.703694] [] vt_ioctl+0x1053/0x10d0 [ 61.703696] [] ? putname+0x53/0x60 [ 61.703697] [] tty_ioctl+0x397/0xbb0 [ 61.703699] [] ? kmem_cache_alloc+0x18b/0x1f0 [ 61.703700] [] ? getname_flags+0x4f/0x1f0 [ 61.703701] [] do_vfs_ioctl+0x96/0x590 [ 61.703703] [] SyS_ioctl+0x79/0x90 [ 61.703704] [] do_syscall_64+0x69/0x110 [ 61.703706] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 61.703707] ---[ end trace 14f0fb1e34b2acbf ]--- [ 61.703708] [drm:skl_wm_flush_pipe] flush pipe C (pass 1) [ 61.706629] [drm:intel_enable_pipe] enabling pipe A [ 61.706634] [drm:intel_edp_backlight_on] [ 61.706635] [drm:intel_panel_enable_backlight] pipe A [ 61.706636] [drm:intel_panel_actually_set_backlight] set backlight PWM = 92160 [ 61.706638] [drm:intel_psr_enable] PSR not supported on this platform [ 61.706639] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 61.706660] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31 [ 61.706660] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 61.707422] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 61.707423] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 61.708407] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 61.711679] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 61.711726] [drm:skylake_pfit_enable] for crtc_state = ffff880466dcf000 [ 61.711788] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 61.711791] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 61.711793] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 61.711794] [drm:intel_enable_pipe] enabling pipe B [ 61.711800] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:DDI B] [ 61.711801] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 36 bytes ELD [ 61.711841] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 61.711842] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 61.711844] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 61.715978] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 61.715979] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 61.715980] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 61.715985] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 61.715989] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 61.716005] [drm:verify_single_dpll_state] PORT PLL A [ 61.716013] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 61.716015] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 61.716025] [drm:verify_single_dpll_state] PORT PLL B [ 61.722028] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 61.722030] [drm:i915_pages_create_for_stolen] offset=0x8ea000, size=16384 [ 61.722114] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 61.722116] [drm:i915_pages_create_for_stolen] offset=0x8ee000, size=16384 [ 61.722129] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 61.722131] [drm:i915_pages_create_for_stolen] offset=0x8f2000, size=16384 [ 61.722143] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 61.722159] [drm:i915_pages_create_for_stolen] offset=0x8f6000, size=16384 [ 61.723236] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 61.723239] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 61.723240] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 62.340117] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 62.340122] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067