[ 0.000000] Linux version 4.7.0-rc5-drm-intel-nightly-ww27-commit-8a6521c+ (gfx@GM-GFX-QA02) (gcc version 4.9.3 (Ubuntu 4.9.3-8ubuntu2~14.04) ) #1 SMP Wed Jun 29 12:28:46 CDT 2016 [ 0.000000] Command line: vmlinuz root=/dev/sda2 initrd=initrd.img idle=halt log_buf_len=4M i915.enable_rc6=1 i915.preliminary_hw_support=1 drm.debug=14 i915.enable_guc_submission=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000012152000-0x0000000077fe0fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077fe1000-0x0000000079d90fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079d91000-0x0000000079df0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079df1000-0x0000000079e30fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000079e31000-0x000000007ac27fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ac28000-0x000000007ac28fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ac29000-0x000000007ac52fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ac53000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by EDK II [ 0.000000] efi: ACPI=0x79e30000 ACPI 2.0=0x79e30014 ESRT=0x79d5c000 SMBIOS=0x78142000 SMBIOS 3.0=0x78140000 PROP=0x7a064920 [ 0.000000] efi: requested map not found. [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 007B000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 0100000000 mask 7F00000000 write-back [ 0.000000] 4 base 0200000000 mask 7F00000000 write-back [ 0.000000] 5 base 0300000000 mask 7F00000000 write-back [ 0.000000] 6 base 0400000000 mask 7F80000000 write-back [ 0.000000] 7 base 00FF800000 mask 70FF800000 write-combining [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0223d000, 0x0223dfff] PGTABLE [ 0.000000] BRK [0x0223e000, 0x0223efff] PGTABLE [ 0.000000] BRK [0x0223f000, 0x0223ffff] PGTABLE [ 0.000000] BRK [0x02240000, 0x02240fff] PGTABLE [ 0.000000] BRK [0x02241000, 0x02241fff] PGTABLE [ 0.000000] BRK [0x02242000, 0x02242fff] PGTABLE [ 0.000000] log_buf_len: 4194304 bytes [ 0.000000] early log buf free: 257428(98%) [ 0.000000] RAMDISK: [mem 0x728e5000-0x747b6fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000079E30014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x0000000079E07188 0000E4 (v01 INTEL EDK2 00000003 BRXT 01000013) [ 0.000000] ACPI: FACP 0x0000000079E28000 00010C (v05 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160422/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160422/tbfadt-708) [ 0.000000] ACPI: DSDT 0x0000000079E18000 0094A0 (v02 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: FACS 0x0000000079DDF000 000040 [ 0.000000] ACPI: SSDT 0x0000000079E2E000 0003C6 (v02 INTEL Tpm2Tabl 00001000 INTL 20150818) [ 0.000000] ACPI: TPM2 0x0000000079E2D000 000034 (v03 00000000 00000000) [ 0.000000] ACPI: UEFI 0x0000000079DE7000 000042 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: BDAT 0x0000000079E2C000 000030 (v02 00000000 00000000) [ 0.000000] ACPI: DBG2 0x0000000079E2B000 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: DBGP 0x0000000079E2A000 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: HPET 0x0000000079E27000 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: LPIT 0x0000000079E26000 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: APIC 0x0000000079E25000 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: MCFG 0x0000000079E24000 00003C (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: NPKT 0x0000000079E23000 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: WSMT 0x0000000079E22000 000028 (v00 INTEL EDK2 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E0E000 0046C3 (v02 INTEL RVPRtd3 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E0D000 000B53 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079E0B000 0016BE (v01 Intel_ Platform 00001000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E0A000 000400 (v02 PmRef Cpu0Ist 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E09000 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E08000 000356 (v02 PmRef Cpu0Tst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E2F000 00017C (v02 PmRef ApTst 00003000 INTL 20150818) [ 0.000000] ACPI: SSDT 0x0000000079E04000 00277A (v02 SaSsdt SaSsdt 00003000 INTL 20150818) [ 0.000000] ACPI: FPDT 0x0000000079E03000 000044 (v01 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: WDAT 0x0000000079E29000 000104 (v01 00000000 00000000) [ 0.000000] ACPI: NHLT 0x0000000079E16000 001A50 (v00 INTEL EDK2 00000002 BRXT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x47fbfa000-0x47fbfdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000effffff] [ 0.000000] node 0: [mem 0x0000000012152000-0x0000000077fe0fff] [ 0.000000] node 0: [mem 0x0000000079e31000-0x000000007ac27fff] [ 0.000000] node 0: [mem 0x000000007ac53000-0x000000007affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff] [ 0.000000] On node 0 totalpages: 4153295 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7489 pages used for memmap [ 0.000000] DMA32 zone: 479283 pages, LIFO batch:31 [ 0.000000] Normal zone: 57344 pages used for memmap [ 0.000000] Normal zone: 3670016 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff] [ 0.000000] PM: Registered nosave memory: [mem 0x77fe1000-0x79d90fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79d91000-0x79df0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79df1000-0x79e30fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac28000-0x7ac28fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ac29000-0x7ac52fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff88047f800000 s103704 r8192 d31464 u524288 [ 0.000000] pcpu-alloc: s103704 r8192 d31464 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4088377 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vmlinuz root=/dev/sda2 initrd=initrd.img idle=halt log_buf_len=4M i915.enable_rc6=1 i915.preliminary_hw_support=1 drm.debug=14 i915.enable_guc_submission=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16184564K/16613180K available (8205K kernel code, 1367K rwdata, 3736K rodata, 1528K init, 1400K bss, 428616K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4434.850 MHz processor [ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 8869.70 BogoMIPS (lpj=17739400) [ 0.000031] pid_max: default: 32768 minimum: 301 [ 0.000037] ACPI: Core revision 20160422 [ 0.000316] Security Framework initialized [ 0.000319] Yama: becoming mindful. [ 0.000325] AppArmor: AppArmor initialized [ 0.000919] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003286] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004356] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004369] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.004542] CPU: Physical Processor ID: 0 [ 0.004546] CPU: Processor Core ID: 0 [ 0.004554] mce: CPU supports 7 MCE banks [ 0.004566] CPU0: Thermal monitoring enabled (TM1) [ 0.004588] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.004590] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.005394] Freeing SMP alternatives memory: 32K (ffffffff820d5000 - ffffffff820dd000) [ 0.009730] ftrace: allocating 32244 entries in 126 pages [ 0.029462] smpboot: Max logical packages: 1 [ 0.029467] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.029798] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.031122] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070811] TSC deadline timer enabled [ 0.070813] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x9) [ 0.070819] Performance Events: PEBS fmt3+, 32-deep LBR, Goldmont events, full-width counters, Intel PMU driver. [ 0.070831] ... version: 4 [ 0.070832] ... bit width: 48 [ 0.070834] ... generic registers: 4 [ 0.070836] ... value mask: 0000ffffffffffff [ 0.070838] ... max period: 0000ffffffffffff [ 0.070840] ... fixed-purpose events: 3 [ 0.070842] ... event mask: 000000070000000f [ 0.071265] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.071342] x86: Booting SMP configuration: [ 0.071345] .... node #0, CPUs: #1 #2 #3 [ 0.312917] x86: Booted up 1 node, 4 CPUs [ 0.312922] smpboot: Total of 4 processors activated (35486.38 BogoMIPS) [ 0.313946] devtmpfs: initialized [ 0.313988] x86/mm: Memory block size: 128MB [ 0.316400] evm: security.selinux [ 0.316403] evm: security.SMACK64 [ 0.316405] evm: security.SMACK64EXEC [ 0.316407] evm: security.SMACK64TRANSMUTE [ 0.316408] evm: security.SMACK64MMAP [ 0.316410] evm: security.ima [ 0.316412] evm: security.capability [ 0.316474] PM: Registering ACPI NVS region [mem 0x79d91000-0x79df0fff] (393216 bytes) [ 0.316482] PM: Registering ACPI NVS region [mem 0x7ac28000-0x7ac28fff] (4096 bytes) [ 0.316518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.316547] pinctrl core: initialized pinctrl subsystem [ 0.316630] RTC time: 21:18:00, date: 06/30/16 [ 0.317326] NET: Registered protocol family 16 [ 0.330890] cpuidle: using governor ladder [ 0.346899] cpuidle: using governor menu [ 0.346909] PCCT header not found. [ 0.346985] ACPI: bus type PCI registered [ 0.346988] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.347037] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.347042] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.347047] PCI: Using configuration type 1 for base access [ 0.353009] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.353012] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.353183] ACPI: Added _OSI(Module Device) [ 0.353186] ACPI: Added _OSI(Processor Device) [ 0.353188] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353190] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356458] ACPI: Executed 3 blocks of module-level executable AML code [ 0.358006] ACPI: Executed 2 blocks of module-level executable AML code [ 0.358867] ACPI: Executed 1 blocks of module-level executable AML code [ 0.361046] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.365086] ACPI: Dynamic OEM Table Load: [ 0.365093] ACPI: SSDT 0xFFFF88046CDB0C00 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20150818) [ 0.365594] ACPI: Dynamic OEM Table Load: [ 0.365600] ACPI: SSDT 0xFFFF88046CDB0E00 00015F (v02 PmRef ApIst 00003000 INTL 20150818) [ 0.366013] ACPI: Dynamic OEM Table Load: [ 0.366019] ACPI: SSDT 0xFFFF88046CDF73C0 00008D (v02 PmRef ApCst 00003000 INTL 20150818) [ 0.366847] ACPI : EC: EC started [ 0.599086] ACPI: Interpreter enabled [ 0.599102] ACPI: (supports S0 S3 S4 S5) [ 0.599104] ACPI: Using IOAPIC for interrupt routing [ 0.599126] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.600165] ACPI: Power Resource [PXP] (off) [ 0.600519] ACPI: Power Resource [PXP] (on) [ 0.719338] ACPI: Power Resource [PXP] (on) [ 0.739299] ACPI: Power Resource [PXP] (off) [ 0.739608] ACPI: Power Resource [PXP] (off) [ 0.739912] ACPI: Power Resource [PXP] (off) [ 0.740302] ACPI: Power Resource [SPPR] (on) [ 0.759165] ACPI: Power Resource [ODPR] (on) [ 0.759258] ACPI: Power Resource [SPPR] (off) [ 0.759437] ACPI: Power Resource [ODPR] (on) [ 0.759616] ACPI: Power Resource [UPPR] (on) [ 0.759763] ACPI: Power Resource [PX03] (on) [ 0.760016] ACPI: Power Resource [UPPR] (on) [ 0.760155] ACPI: Power Resource [UPPR] (on) [ 0.760398] ACPI: Power Resource [UPPR] (on) [ 0.760554] ACPI: Power Resource [UPPR] (on) [ 0.760686] ACPI: Power Resource [UPPR] (on) [ 0.760841] ACPI: Power Resource [USBC] (on) [ 0.760914] ACPI: Power Resource [SDPR] (on) [ 0.775278] ACPI: Power Resource [LSPR] (on) [ 0.776898] ACPI: Power Resource [PAUD] (on) [ 0.778736] ACPI: Power Resource [FN00] (on) [ 0.863430] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.863436] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.863845] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.863856] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.864226] PCI host bridge to bus 0000:00 [ 0.864229] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.864232] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.864234] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.864237] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.864239] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] [ 0.864243] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window] [ 0.864246] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] [ 0.864249] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] [ 0.864253] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.864260] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000 [ 0.864413] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000 [ 0.864419] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.864423] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.864426] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.864571] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000 [ 0.864577] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit] [ 0.864723] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300 [ 0.864733] pci 0000:00:0e.0: reg 0x10: [mem 0x92210000-0x92213fff 64bit] [ 0.864746] pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit] [ 0.864771] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 0.864905] pci 0000:00:0e.0: System wakeup disabled by ACPI [ 0.864934] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000 [ 0.864946] pci 0000:00:0f.0: reg 0x10: [mem 0x92218000-0x92218fff 64bit] [ 0.864986] pci 0000:00:0f.0: PME# supported from D3hot [ 0.865113] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007 [ 0.865124] pci 0000:00:11.0: reg 0x10: [mem 0x92214000-0x92215fff 64bit] [ 0.865130] pci 0000:00:11.0: reg 0x18: [mem 0x9221b000-0x9221bfff 64bit] [ 0.865279] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601 [ 0.865286] pci 0000:00:12.0: reg 0x10: [mem 0x92216000-0x92217fff] [ 0.865290] pci 0000:00:12.0: reg 0x14: [mem 0x92242000-0x922420ff] [ 0.865293] pci 0000:00:12.0: reg 0x18: [io 0x2080-0x2087] [ 0.865296] pci 0000:00:12.0: reg 0x1c: [io 0x2088-0x208b] [ 0.865300] pci 0000:00:12.0: reg 0x20: [io 0x2060-0x207f] [ 0.865303] pci 0000:00:12.0: reg 0x24: [mem 0x92240000-0x922407ff] [ 0.865320] pci 0000:00:12.0: PME# supported from D3hot [ 0.865457] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400 [ 0.865486] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 0.865622] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.865659] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330 [ 0.865668] pci 0000:00:15.0: reg 0x10: [mem 0x92200000-0x9220ffff 64bit] [ 0.865698] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 0.865806] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.865841] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000 [ 0.865850] pci 0000:00:16.0: reg 0x10: [mem 0x9221c000-0x9221cfff 64bit] [ 0.865856] pci 0000:00:16.0: reg 0x18: [mem 0x9221d000-0x9221dfff 64bit] [ 0.865998] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000 [ 0.866008] pci 0000:00:16.1: reg 0x10: [mem 0x9221e000-0x9221efff 64bit] [ 0.866014] pci 0000:00:16.1: reg 0x18: [mem 0x9221f000-0x9221ffff 64bit] [ 0.866156] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000 [ 0.866165] pci 0000:00:16.2: reg 0x10: [mem 0x92220000-0x92220fff 64bit] [ 0.866171] pci 0000:00:16.2: reg 0x18: [mem 0x92221000-0x92221fff 64bit] [ 0.866315] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000 [ 0.866325] pci 0000:00:16.3: reg 0x10: [mem 0x92222000-0x92222fff 64bit] [ 0.866331] pci 0000:00:16.3: reg 0x18: [mem 0x92223000-0x92223fff 64bit] [ 0.866477] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000 [ 0.866487] pci 0000:00:17.0: reg 0x10: [mem 0x92224000-0x92224fff 64bit] [ 0.866492] pci 0000:00:17.0: reg 0x18: [mem 0x92225000-0x92225fff 64bit] [ 0.866634] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000 [ 0.866645] pci 0000:00:17.1: reg 0x10: [mem 0x92226000-0x92226fff 64bit] [ 0.866650] pci 0000:00:17.1: reg 0x18: [mem 0x92227000-0x92227fff 64bit] [ 0.866791] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000 [ 0.866801] pci 0000:00:17.2: reg 0x10: [mem 0x92228000-0x92228fff 64bit] [ 0.866807] pci 0000:00:17.2: reg 0x18: [mem 0x92229000-0x92229fff 64bit] [ 0.866950] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000 [ 0.866959] pci 0000:00:17.3: reg 0x10: [mem 0x9222a000-0x9222afff 64bit] [ 0.866965] pci 0000:00:17.3: reg 0x18: [mem 0x9222b000-0x9222bfff 64bit] [ 0.867111] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000 [ 0.867121] pci 0000:00:18.0: reg 0x10: [mem 0x9222c000-0x9222cfff 64bit] [ 0.867127] pci 0000:00:18.0: reg 0x18: [mem 0x9222d000-0x9222dfff 64bit] [ 0.867273] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000 [ 0.867283] pci 0000:00:18.1: reg 0x10: [mem 0x9222e000-0x9222efff 64bit] [ 0.867289] pci 0000:00:18.1: reg 0x18: [mem 0x9222f000-0x9222ffff 64bit] [ 0.867430] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000 [ 0.867440] pci 0000:00:18.2: reg 0x10: [mem 0x92230000-0x92230fff 64bit] [ 0.867445] pci 0000:00:18.2: reg 0x18: [mem 0x92231000-0x92231fff 64bit] [ 0.867588] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000 [ 0.867599] pci 0000:00:18.3: reg 0x10: [mem 0x92232000-0x92232fff 64bit] [ 0.867605] pci 0000:00:18.3: reg 0x18: [mem 0x92233000-0x92233fff 64bit] [ 0.867750] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000 [ 0.867760] pci 0000:00:19.0: reg 0x10: [mem 0x92234000-0x92234fff 64bit] [ 0.867766] pci 0000:00:19.0: reg 0x18: [mem 0x92235000-0x92235fff 64bit] [ 0.867907] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000 [ 0.867916] pci 0000:00:19.1: reg 0x10: [mem 0x92236000-0x92236fff 64bit] [ 0.867923] pci 0000:00:19.1: reg 0x18: [mem 0x92237000-0x92237fff 64bit] [ 0.868063] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000 [ 0.868073] pci 0000:00:19.2: reg 0x10: [mem 0x92238000-0x92238fff 64bit] [ 0.868079] pci 0000:00:19.2: reg 0x18: [mem 0x92239000-0x92239fff 64bit] [ 0.868228] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501 [ 0.868236] pci 0000:00:1b.0: reg 0x10: [mem 0x9223a000-0x9223afff 64bit] [ 0.868241] pci 0000:00:1b.0: reg 0x18: [mem 0x9223b000-0x9223bfff 64bit] [ 0.868392] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501 [ 0.868402] pci 0000:00:1c.0: reg 0x10: [mem 0x9223c000-0x9223cfff 64bit] [ 0.868407] pci 0000:00:1c.0: reg 0x18: [mem 0x9223d000-0x9223dfff 64bit] [ 0.868558] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501 [ 0.868567] pci 0000:00:1e.0: reg 0x10: [mem 0x9223e000-0x9223efff 64bit] [ 0.868572] pci 0000:00:1e.0: reg 0x18: [mem 0x9223f000-0x9223ffff 64bit] [ 0.868714] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100 [ 0.868872] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 [ 0.868887] pci 0000:00:1f.1: reg 0x10: [mem 0x92241000-0x922410ff 64bit] [ 0.868909] pci 0000:00:1f.1: reg 0x20: [io 0x2040-0x205f] [ 0.869094] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.869108] pci 0000:01:00.0: reg 0x10: [mem 0x92100000-0x9211ffff] [ 0.869119] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f] [ 0.869127] pci 0000:01:00.0: reg 0x1c: [mem 0x92120000-0x92123fff] [ 0.869175] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.869197] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.875168] pci 0000:00:13.0: PCI bridge to [bus 01] [ 0.875172] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 0.875174] pci 0000:00:13.0: bridge window [mem 0x92100000-0x921fffff] [ 0.876581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.876624] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.876667] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.876707] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.876748] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.876788] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.876827] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.876867] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.877339] ACPI: Enabled 2 GPEs in block 00 to 7F [ 0.877354] ACPI : EC: EC stopped [ 0.877407] ACPI : EC: GPE = 0x2b, I/O: command/status = 0x66, data = 0x62 [ 0.877410] ACPI : EC: EC started [ 1.107404] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.107408] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.107414] vgaarb: loaded [ 1.107416] vgaarb: bridge control possible 0000:00:02.0 [ 1.107534] SCSI subsystem initialized [ 1.107569] libata version 3.00 loaded. [ 1.107584] ACPI: bus type USB registered [ 1.107598] usbcore: registered new interface driver usbfs [ 1.107605] usbcore: registered new interface driver hub [ 1.107618] usbcore: registered new device driver usb [ 1.107719] PCI: Using ACPI for IRQ routing [ 1.109500] PCI: pci_cache_line_size set to 64 bytes [ 1.109560] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 1.109561] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 1.109561] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff] [ 1.109562] e820: reserve RAM buffer [mem 0x77fe1000-0x77ffffff] [ 1.109563] e820: reserve RAM buffer [mem 0x7ac28000-0x7bffffff] [ 1.109564] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 1.109628] NetLabel: Initializing [ 1.109630] NetLabel: domain hash size = 128 [ 1.109632] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.109640] NetLabel: unlabeled traffic allowed by default [ 1.109737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.109743] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 1.110260] clocksource: Switched to clocksource hpet [ 1.114002] VFS: Disk quotas dquot_6.6.0 [ 1.114016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.114056] AppArmor: AppArmor Filesystem Enabled [ 1.114088] pnp: PnP ACPI init [ 1.114182] system 00:00: [io 0x06a4] has been reserved [ 1.114185] system 00:00: [io 0x06a0] has been reserved [ 1.114189] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.114253] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io 0x1000-0x1fff] [ 1.114277] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.114280] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.114282] system 00:01: [io 0x0500-0x05fe] has been reserved [ 1.114285] system 00:01: [io 0x0600-0x061f] has been reserved [ 1.114288] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.114329] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.114601] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.114604] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved [ 1.114607] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.114609] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.114612] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved [ 1.114615] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved [ 1.114617] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved [ 1.114620] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.114622] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.114626] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.114750] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.114836] pnp: PnP ACPI: found 5 devices [ 1.121276] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.121291] pci 0000:00:13.0: PCI bridge to [bus 01] [ 1.121294] pci 0000:00:13.0: bridge window [io 0x1000-0x1fff] [ 1.121298] pci 0000:00:13.0: bridge window [mem 0x92100000-0x921fffff] [ 1.121303] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.121305] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.121306] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.121307] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.121308] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window] [ 1.121309] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window] [ 1.121310] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window] [ 1.121311] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window] [ 1.121313] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.121314] pci_bus 0000:01: resource 1 [mem 0x92100000-0x921fffff] [ 1.121330] NET: Registered protocol family 2 [ 1.121446] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.121683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.121861] TCP: Hash tables configured (established 131072 bind 65536) [ 1.121886] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.121959] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.122046] NET: Registered protocol family 1 [ 1.122057] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.122222] PCI: CLS 64 bytes, default 64 [ 1.122251] Trying to unpack rootfs image as initramfs... [ 1.442458] Freeing initrd memory: 31560K (ffff8800728e5000 - ffff8800747b7000) [ 1.442464] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.442466] software IO TLB [mem 0x6e8e5000-0x728e5000] (64MB) mapped at [ffff88006e8e5000-ffff8800728e4fff] [ 1.442560] Scanning for low memory corruption every 60 seconds [ 1.442779] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.442792] audit: initializing netlink subsys (disabled) [ 1.442801] audit: type=2000 audit(1467321481.615:1): initialized [ 1.443000] Initialise system trusted keyrings [ 1.443074] workingset: timestamp_bits=38 max_order=22 bucket_order=0 [ 1.444163] zbud: loaded [ 1.444541] fuse init (API version 7.24) [ 1.444634] Key type big_key registered [ 1.445046] Key type asymmetric registered [ 1.445048] Asymmetric key parser 'x509' registered [ 1.445073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.445100] io scheduler noop registered [ 1.445102] io scheduler deadline registered (default) [ 1.445123] io scheduler cfq registered [ 1.445314] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt [ 1.445318] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.445321] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded [ 1.445325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.445330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.445351] efifb: probing for efifb [ 1.445361] efifb: framebuffer at 0x80000000, using 8100k, total 8100k [ 1.445363] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.445365] efifb: scrolling: redraw [ 1.445367] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.448959] Console: switching to colour frame buffer device 240x67 [ 1.452469] fb0: EFI VGA frame buffer device [ 1.452532] ACPI: AC Adapter [ADP1] (off-line) [ 1.452582] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0 [ 1.452757] ACPI: Lid Switch [LID0] [ 1.452799] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.452822] ACPI: Power Button [PWRB] [ 1.452858] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.452879] ACPI: Power Button [PWRF] [ 1.456635] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.456653] ACPI: Thermal Zone [TZ01] (29 C) [ 1.456686] GHES: HEST is not enabled! [ 1.456761] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.456772] ACPI: Battery Slot [BAT0] (battery present) [ 1.456796] ACPI: Battery Slot [BAT1] (battery absent) [ 1.476867] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.478007] Linux agpgart interface v0.103 [ 1.480084] brd: module loaded [ 1.481004] loop: module loaded [ 1.481140] libphy: Fixed MDIO Bus: probed [ 1.481155] tun: Universal TUN/TAP device driver, 1.6 [ 1.481169] tun: (C) 1999-2004 Max Krasnyansky [ 1.481214] PPP generic driver version 2.4.2 [ 1.481264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.481286] ehci-pci: EHCI PCI platform driver [ 1.481304] ehci-platform: EHCI generic platform driver [ 1.481324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.481344] ohci-pci: OHCI PCI platform driver [ 1.481362] ohci-platform: OHCI generic platform driver [ 1.481380] uhci_hcd: USB Universal Host Controller Interface driver [ 1.481492] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.481511] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 1.482560] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.482587] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported [ 1.482632] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.482651] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.482671] usb usb1: Product: xHCI Host Controller [ 1.482685] usb usb1: Manufacturer: Linux 4.7.0-rc5-drm-intel-nightly-ww27-commit-8a6521c+ xhci-hcd [ 1.482710] usb usb1: SerialNumber: 0000:00:15.0 [ 1.482804] hub 1-0:1.0: USB hub found [ 1.482822] hub 1-0:1.0: 8 ports detected [ 1.483272] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.483289] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 1.483333] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.484181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.485043] usb usb2: Product: xHCI Host Controller [ 1.485890] usb usb2: Manufacturer: Linux 4.7.0-rc5-drm-intel-nightly-ww27-commit-8a6521c+ xhci-hcd [ 1.486758] usb usb2: SerialNumber: 0000:00:15.0 [ 1.487683] hub 2-0:1.0: USB hub found [ 1.488533] hub 2-0:1.0: 7 ports detected [ 1.489818] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.490679] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.491866] i8042: Warning: Keylock active [ 1.492816] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.493780] mousedev: PS/2 mouse device common for all mice [ 1.494780] rtc_cmos 00:04: RTC can wake from S4 [ 1.495782] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.496680] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.497575] i2c /dev entries driver [ 1.498487] device-mapper: uevent: version 1.0.3 [ 1.499417] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.500313] ledtrig-cpu: registered to indicate activity on CPUs [ 1.501199] EFI Variables Facility v0.08 2004-May-17 [ 1.505295] NET: Registered protocol family 10 [ 1.506304] NET: Registered protocol family 17 [ 1.507188] Key type dns_resolver registered [ 1.508210] microcode: CPU0 sig=0x506c9, pf=0x1, revision=0x14 [ 1.509091] microcode: CPU1 sig=0x506c9, pf=0x1, revision=0x14 [ 1.509965] microcode: CPU2 sig=0x506c9, pf=0x1, revision=0x14 [ 1.510823] microcode: CPU3 sig=0x506c9, pf=0x1, revision=0x14 [ 1.511698] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.512646] registered taskstats version 1 [ 1.513476] Loading compiled-in X.509 certificates [ 1.516114] Loaded X.509 cert 'Build time autogenerated kernel key: 2bf9082e7e01ba4d8c6d31ccd9896d0c190921f7' [ 1.516966] zswap: loaded using pool lzo/zbud [ 1.519965] Key type trusted registered [ 1.522961] Key type encrypted registered [ 1.523782] AppArmor: AppArmor sha1 policy hashing enabled [ 1.524622] ima: No TPM chip found, activating TPM-bypass! [ 1.525456] evm: HMAC attrs: 0x1 [ 1.526587] Magic number: 4:754:349 [ 1.527496] rtc_cmos 00:04: setting system clock to 2016-06-30 21:18:05 UTC (1467321485) [ 1.528674] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.529516] EDD information not available. [ 1.530379] PM: Hibernation image not present or could not be loaded. [ 1.531052] Freeing unused kernel memory: 1528K (ffffffff81f57000 - ffffffff820d5000) [ 1.531904] Write protecting the kernel read-only data: 14336k [ 1.533078] Freeing unused kernel memory: 2020K (ffff880001807000 - ffff880001a00000) [ 1.534544] Freeing unused kernel memory: 360K (ffff880001da6000 - ffff880001e00000) [ 1.543786] random: systemd-udevd urandom read with 5 bits of entropy available [ 1.552263] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 1.572156] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.586531] hidraw: raw HID events driver (C) Jiri Kosina [ 1.592108] pps_core: LinuxPPS API ver. 1 registered [ 1.592983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.594250] [drm] Initialized drm 1.1.0 20060810 [ 1.595183] PTP clock support registered [ 1.596876] dca service started, version 1.12.1 [ 1.597901] ahci 0000:00:12.0: version 3.0 [ 1.599172] sdhci: Secure Digital Host Controller Interface driver [ 1.600074] sdhci: Copyright(c) Pierre Ossman [ 1.601009] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.601911] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.602872] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.603770] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 1.604806] scsi host0: ahci [ 1.605741] ata1: SATA max UDMA/133 abar m2048@0x92240000 port 0x92240100 irq 122 [ 1.605958] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 1.605959] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.605959] usb 1-2: Product: USB2.0 Hub [ 1.606116] hub 1-2:1.0: USB hub found [ 1.606188] hub 1-2:1.0: 4 ports detected [ 1.611219] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev a) [ 1.612237] sdhci-pci 0000:00:1b.0: failed to setup card detect gpio [ 1.615609] pps pps0: new PPS source ptp0 [ 1.616504] igb 0000:01:00.0: added PHC on eth0 [ 1.617198] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit [ 1.617207] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev a) [ 1.619189] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.619289] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 1.619319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.621101] Setting dangerous option enable_rc6 - tainting kernel [ 1.621102] Setting dangerous option preliminary_hw_support - tainting kernel [ 1.621103] Setting dangerous option enable_guc_submission - tainting kernel [ 1.621380] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 1.621389] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev a) [ 1.625506] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit [ 1.625602] [drm:intel_detect_pch] No PCH found. [ 1.625603] [drm:get_allowed_dc_mask] Allowed DC state mask 09 [ 1.625679] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x5a84 rev=0x0a flags=need_gfx_hws,is_broxton,is_preliminary,has_fbc,has_hotplug,has_ddi,has_fpga_dbg, [ 1.625679] [drm:intel_device_info_runtime_init] slice total: 1 [ 1.625680] [drm:intel_device_info_runtime_init] subslice total: 3 [ 1.625680] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 1.625680] [drm:intel_device_info_runtime_init] EU total: 18 [ 1.625681] [drm:intel_device_info_runtime_init] EU per subslice: 6 [ 1.625681] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.625681] [drm:intel_device_info_runtime_init] has subslice power gating: y [ 1.625682] [drm:intel_device_info_runtime_init] has EU power gating: y [ 1.625682] [drm:intel_device_info_runtime_init] ppgtt mode: 3 [ 1.627299] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.627300] [drm] Memory usable by graphics device = 4096M [ 1.627301] [drm:i915_ggtt_init_hw] GMADR size = 256M [ 1.627302] [drm:i915_ggtt_init_hw] GTT stolen size = 64M [ 1.627303] checking generic (80000000 7e9000) vs hw (80000000 10000000) [ 1.627303] fb: switching to inteldrmfb from EFI VGA [ 1.629109] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:f7 [ 1.629110] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.629111] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 1.629152] Console: switching to colour dummy device 80x25 [ 1.629255] [drm] Replacing VGA console driver [ 1.629340] [drm:intel_opregion_setup] graphic opregion physical addr: 0x79dda018 [ 1.629345] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.629345] [drm:intel_opregion_setup] ASLE supported [ 1.629348] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA) [ 1.629371] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.629373] [drm] Driver supports precise vblank timestamp query. [ 1.629376] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 1.629377] [drm:intel_bios_init] VBT signature "$VBT BROXTON ", BDB version 207 [ 1.629378] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 [ 1.629379] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 1.629380] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [ 1.629381] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [ 1.629382] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 1.629383] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 1.629385] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.629386] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 1.629387] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180 [ 1.629388] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 1.629389] [drm:parse_device_mapping] Expected child device config size for VBT version 207 not known; assuming 38 [ 1.629390] [drm:parse_driver_features] DRRS State Enabled:1 [ 1.629392] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.629393] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 1.629394] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.629394] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8 [ 1.629395] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.629396] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8 [ 1.629418] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 1.629422] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.629424] [drm:intel_power_well_enable] enabling power well 1 [ 1.629426] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz [ 1.629438] [drm:intel_power_well_enable] enabling always-on [ 1.629439] [drm:intel_power_well_enable] enabling DC off [ 1.629440] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.629442] [drm:intel_power_well_enable] enabling power well 2 [ 1.629443] [drm:intel_power_well_enable] enabling dpio-common-a [ 1.630656] [drm:intel_power_well_enable] enabling dpio-common-bc [ 1.630665] [drm:bxt_ddi_phy_init] DDI PHY 0 already enabled, won't reprogram it [ 1.630667] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 1.630683] [drm:bxt_ddi_phy_init] DDI PHY 1 already enabled, won't reprogram it [ 1.630694] [drm:bxt_ddi_phy_init] DDI PHY 0 already enabled, won't reprogram it [ 1.630697] [drm:intel_csr_ucode_init] Loading i915/bxt_dmc_ver1_07.bin [ 1.630800] [drm] Finished loading i915/bxt_dmc_ver1_07.bin (v1.7) [ 1.631010] [drm:intel_fbc_init] Sanitized enable_fbc value: 0 [ 1.636081] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 9 (9.0 usec) [ 1.636084] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 9 (9.0 usec) [ 1.636085] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 10 (10.0 usec) [ 1.636086] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 24 (24.0 usec) [ 1.636087] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 24 (24.0 usec) [ 1.636087] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 24 (24.0 usec) [ 1.636088] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 24 (24.0 usec) [ 1.636089] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 24 (24.0 usec) [ 1.636091] [drm:intel_modeset_init] 3 display pipes available. [ 1.636105] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz [ 1.636106] [drm:intel_update_max_cdclk] Max CD clock rate: 624000 kHz [ 1.636107] [drm:intel_update_max_cdclk] Max dotclock rate: 624000 kHz [ 1.636109] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.636498] [drm:intel_ddi_init] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing [ 1.636500] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.636511] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000 [ 1.636512] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.636513] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500 [ 1.636514] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 1.636516] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 [ 1.636517] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking [ 1.641386] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00 [ 1.641517] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 1.646052] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel. [ 1.648110] [drm:intel_dp_get_dpcd] EDP DPCD : 02 fb c7 [ 1.648112] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.648113] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.648114] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.648115] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.648983] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.648984] [drm:intel_dp_drrs_init] Downclock mode is not found. DRRS not supported [ 1.648986] [drm:get_backlight_max_vbt] VBT defined backlight frequency 200 Hz [ 1.648987] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, disabled, brightness 0/96000 [ 1.648994] [drm:intel_dp_init_connector] Adding DP connector on port B [ 1.649004] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 1.649011] [drm:intel_dp_init_connector] Adding DP connector on port C [ 1.649016] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 1.649018] [drm:intel_dsi_init] [ 1.649029] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 1.649032] [drm:intel_modeset_readout_hw_state] [CRTC:31:pipe B] hw state readout: disabled [ 1.649033] [drm:intel_modeset_readout_hw_state] [CRTC:36:pipe C] hw state readout: disabled [ 1.649035] [drm:intel_modeset_readout_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000000, on 0 [ 1.649040] [drm:intel_modeset_readout_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000001, on 1 [ 1.649042] [drm:intel_modeset_readout_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0 [ 1.649044] [drm:intel_modeset_readout_hw_state] [ENCODER:38:DDI A] hw state readout: disabled, pipe A [ 1.649049] [drm:intel_modeset_readout_hw_state] [ENCODER:46:DDI B] hw state readout: enabled, pipe A [ 1.649050] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP-MST A] hw state readout: disabled, pipe A [ 1.649051] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP-MST B] hw state readout: disabled, pipe B [ 1.649052] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP-MST C] hw state readout: disabled, pipe C [ 1.649053] [drm:intel_modeset_readout_hw_state] [ENCODER:53:DDI C] hw state readout: disabled, pipe A [ 1.649054] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP-MST A] hw state readout: disabled, pipe A [ 1.649055] [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP-MST B] hw state readout: disabled, pipe B [ 1.649056] [drm:intel_modeset_readout_hw_state] [ENCODER:57:DP-MST C] hw state readout: disabled, pipe C [ 1.649057] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:eDP-1] hw state readout: disabled [ 1.649059] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-1] hw state readout: enabled [ 1.649060] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled [ 1.649062] [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:DP-2] hw state readout: disabled [ 1.649063] [drm:intel_modeset_readout_hw_state] [CONNECTOR:58:HDMI-A-2] hw state readout: disabled [ 1.649071] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff88046cc1a800 for pipe A [ 1.649072] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 1.649073] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.649074] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.649075] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1730150, gmch_n: 8388608, link_m: 144179, link_n: 524288, tu: 64 [ 1.649077] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.649077] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.649078] [drm:intel_dump_pipe_config] requested mode: [ 1.649080] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148499 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.649080] [drm:intel_dump_pipe_config] adjusted mode: [ 1.649082] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148499 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.649083] [drm:intel_dump_crtc_timings] crtc timings: 148499 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 [ 1.649084] [drm:intel_dump_pipe_config] port clock: 540000 [ 1.649085] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.649086] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 1.649087] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.649088] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.649088] [drm:intel_dump_pipe_config] ips: 0 [ 1.649089] [drm:intel_dump_pipe_config] double wide: 0 [ 1.649091] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58 [ 1.649092] [drm:intel_dump_pipe_config] planes on this crtc [ 1.649093] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] disabled, scaler_id = -1 [ 1.649093] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 1.649094] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 1.649095] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 1.649097] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][setup_hw_state] config ffff880466a98800 for pipe B [ 1.649097] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.649098] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.649099] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.649100] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.649101] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.649102] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.649103] [drm:intel_dump_pipe_config] requested mode: [ 1.649104] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.649105] [drm:intel_dump_pipe_config] adjusted mode: [ 1.649106] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.649107] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.649108] [drm:intel_dump_pipe_config] port clock: 0 [ 1.649109] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.649110] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.649110] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.649111] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.649112] [drm:intel_dump_pipe_config] ips: 0 [ 1.649113] [drm:intel_dump_pipe_config] double wide: 0 [ 1.649114] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.649115] [drm:intel_dump_pipe_config] planes on this crtc [ 1.649116] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] disabled, scaler_id = -1 [ 1.649117] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 1.649117] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 1.649118] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 1.649120] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][setup_hw_state] config ffff880466a99800 for pipe C [ 1.649120] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.649121] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 1.649122] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.649123] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.649124] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.649125] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.649126] [drm:intel_dump_pipe_config] requested mode: [ 1.649127] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.649128] [drm:intel_dump_pipe_config] adjusted mode: [ 1.649129] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.649130] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.649131] [drm:intel_dump_pipe_config] port clock: 0 [ 1.649132] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 1.649133] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.649133] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.649134] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.649135] [drm:intel_dump_pipe_config] ips: 0 [ 1.649136] [drm:intel_dump_pipe_config] double wide: 0 [ 1.649137] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.649138] [drm:intel_dump_pipe_config] planes on this crtc [ 1.649139] [drm:intel_dump_pipe_config] [PLANE:34:plane 1C] disabled, scaler_id = -1 [ 1.649140] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = -1 [ 1.649140] [drm:intel_dump_pipe_config] [PLANE:37:plane 2C] disabled, scaler_id = -1 [ 1.649156] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.649158] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.649160] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400 [ 1.649163] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880466ac8000 [ 1.649164] [drm:intel_guc_init] GuC firmware pending, path i915/bxt_guc_ver8_7.bin [ 1.649165] [drm:guc_fw_fetch] before requesting firmware: GuC fw fetch status PENDING [ 1.649198] [drm:guc_fw_fetch] fetch GuC fw from i915/bxt_guc_ver8_7.bin succeeded, fw ffff88007a331340 [ 1.649200] [drm:guc_fw_fetch] firmware version 8.7 OK (minimum 8.7) [ 1.649235] [drm:guc_fw_fetch] GuC fw fetch status SUCCESS, obj ffff880466ac8240 [ 1.649291] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000 [ 1.649292] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000] [ 1.651107] [drm:i915_gem_context_init] LR context support initialized [ 1.651114] [drm:intel_init_pipe_control] render ring pipe control offset: 0x007ea000 [ 1.651119] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.651121] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=16384 [ 1.651141] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.651143] [drm:i915_pages_create_for_stolen] offset=0x7ed000, size=16384 [ 1.651151] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.651153] [drm:i915_pages_create_for_stolen] offset=0x7f1000, size=16384 [ 1.651160] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 1.651161] [drm:i915_pages_create_for_stolen] offset=0x7f5000, size=16384 [ 1.651171] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 1.651192] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 1.651211] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 1.651229] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 1.651246] [drm:intel_guc_setup] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load NONE [ 1.651248] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load PENDING [ 1.652874] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x8002f0ec [ 1.652875] [drm:guc_ucode_xfer_dma] returning 0 [ 1.652877] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load SUCCESS [ 1.652886] [drm:select_doorbell_register] assigned normal priority doorbell id 0x0 [ 1.652887] [drm:select_doorbell_cacheline] selected doorbell cacheline 0x0, next 0x40, linesize 64 [ 1.652898] [drm:guc_client_alloc] new priority 2 client ffff88046764a880: ctx_index 0 [ 1.652899] [drm:guc_client_alloc] doorbell id 0, cacheline offset 0x0 [ 1.655877] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz [ 1.655883] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 1.655884] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 1.655885] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 1.655886] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 1.655887] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400 [ 1.655888] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400) [ 1.655889] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 1.655890] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 1.655891] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 1.655894] [drm:bxt_hpd_irq_setup] Invert bit setting: hp_ctl:18001919 hp_port:38 [ 1.656014] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.656016] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [ 1.656071] [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1 [ 1.656136] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-2 [ 1.656462] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 1.659374] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.659531] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.659588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.659591] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.662149] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.666134] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.672114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] status updated from unknown to connected [ 1.672122] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.672124] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.672126] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.672127] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.672128] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.676099] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.680085] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.680087] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.680088] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.680089] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.684171] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.684283] [drm:drm_dp_i2c_do_msg] native defer [ 1.685043] [drm:drm_dp_i2c_do_msg] native defer [ 1.685800] [drm:drm_dp_i2c_do_msg] native defer [ 1.686554] [drm:drm_dp_i2c_do_msg] native defer [ 1.689294] [drm:drm_dp_i2c_do_msg] native defer [ 1.690049] [drm:drm_dp_i2c_do_msg] native defer [ 1.690806] [drm:drm_dp_i2c_do_msg] native defer [ 1.691138] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3fecffa5e2c, max_idle_ns: 440795296483 ns [ 1.693326] [drm:drm_dp_i2c_do_msg] native defer [ 1.694082] [drm:drm_dp_i2c_do_msg] native defer [ 1.694872] [drm:drm_dp_i2c_do_msg] native defer [ 1.695661] [drm:drm_dp_i2c_do_msg] native defer [ 1.696328] usb 1-2.1: new high-speed USB device number 3 using xhci_hcd [ 1.696508] [drm:drm_dp_i2c_do_msg] native defer [ 1.697575] [drm:drm_dp_i2c_do_msg] native defer [ 1.698333] [drm:drm_dp_i2c_do_msg] native defer [ 1.699119] [drm:drm_dp_i2c_do_msg] native defer [ 1.699899] [drm:drm_dp_i2c_do_msg] native defer [ 1.700676] [drm:drm_dp_i2c_do_msg] native defer [ 1.701420] [drm:drm_dp_i2c_do_msg] native defer [ 1.702429] [drm:drm_dp_i2c_do_msg] native defer [ 1.703363] [drm:drm_dp_i2c_do_msg] native defer [ 1.704517] [drm:drm_dp_i2c_do_msg] native defer [ 1.705306] [drm:drm_dp_i2c_do_msg] native defer [ 1.706096] [drm:drm_dp_i2c_do_msg] native defer [ 1.706895] [drm:drm_dp_i2c_do_msg] native defer [ 1.707681] [drm:drm_dp_i2c_do_msg] native defer [ 1.708471] [drm:drm_dp_i2c_do_msg] native defer [ 1.709259] [drm:drm_dp_i2c_do_msg] native defer [ 1.710048] [drm:drm_dp_i2c_do_msg] native defer [ 1.710835] [drm:drm_dp_i2c_do_msg] native defer [ 1.711484] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 1.711611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] status updated from unknown to connected [ 1.711647] [drm:drm_edid_to_eld] ELD monitor VX279 [ 1.711649] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.711649] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 1.711662] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.711664] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.711666] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.711667] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.711669] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.711670] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.711672] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.711673] [drm:drm_mode_debug_printmodeline] Modeline 73:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.711675] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.711676] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.711678] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.711679] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.711681] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.711682] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.711684] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.711685] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.711687] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.711688] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.711689] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.711691] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.711692] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.711694] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.711695] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.711697] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.711698] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.711700] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.711701] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.711703] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.711704] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1.711705] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.711707] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.711708] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.711710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.711711] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.711751] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.711752] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.711790] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.711792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.711829] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.711830] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.711867] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.711869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected [ 1.711870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.711871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.711871] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.712217] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 1.712417] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.712419] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.712420] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.712421] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.712622] [drm:intel_dp_probe_oui] Sink OUI: 4ce000 [ 1.712824] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.713071] mmc1: new HS400 MMC card at address 0001 [ 1.718399] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] status updated from unknown to connected [ 1.718403] mmcblk1: mmc1:0001 CGND3R 58.2 GiB [ 1.718410] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.718413] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.718415] [drm:drm_mode_debug_printmodeline] Modeline 80:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.718416] [drm:drm_mode_debug_printmodeline] Modeline 90:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.718418] [drm:drm_mode_debug_printmodeline] Modeline 88:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.718419] [drm:drm_mode_debug_printmodeline] Modeline 89:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.718421] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.718422] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.718424] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.718425] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.718427] [drm:drm_mode_debug_printmodeline] Modeline 95:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.718428] [drm:drm_mode_debug_printmodeline] Modeline 98:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.718429] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.718430] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.718454] mmcblk1boot0: mmc1:0001 CGND3R partition 1 4.00 MiB [ 1.718474] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.718475] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.718504] mmcblk1boot1: mmc1:0001 CGND3R partition 2 4.00 MiB [ 1.718513] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.718515] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.718556] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.718556] mmcblk1rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB [ 1.718559] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.718597] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.718599] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] status updated from unknown to disconnected [ 1.718600] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.718602] [drm:drm_setup_crtcs] [ 1.718603] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.718604] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.718605] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.718605] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.718606] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.718608] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping [ 1.718609] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.718610] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.718611] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:26:pipe A]: 1920x1080 [ 1.718612] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.718613] [drm:intel_fb_initial_config] connector DP-2 has no encoder or crtc, skipping [ 1.718613] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.718614] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 1.718615] [drm:intel_fb_initial_config] Enabled: 1, detected: 3 [ 1.718616] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.718617] [drm:drm_target_preferred] looking for cmdline mode on connector 39 [ 1.718618] [drm:drm_target_preferred] looking for preferred mode on connector 39 0 [ 1.718619] [drm:drm_target_preferred] found mode 1920x1080 [ 1.718619] [drm:drm_target_preferred] looking for cmdline mode on connector 47 [ 1.718620] [drm:drm_target_preferred] looking for preferred mode on connector 47 0 [ 1.718621] [drm:drm_target_preferred] found mode 1920x1080 [ 1.718622] [drm:drm_target_preferred] looking for cmdline mode on connector 54 [ 1.718622] [drm:drm_target_preferred] looking for preferred mode on connector 54 0 [ 1.718623] [drm:drm_target_preferred] found mode 1920x1200 [ 1.718624] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.718628] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.718630] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 1.718631] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 36 (0,0) [ 1.718632] [drm:intelfb_create] re-using BIOS fb [ 1.718636] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff880466ac8000 [ 1.718721] fbcon: inteldrmfb (fb0) is primary device [ 1.718770] Console: switching to colour frame buffer device 240x67 [ 1.719152] mmcblk1: p1 p2 p3 p4 [ 1.719225] [drm:drm_fb_helper_hotplug_event] [ 1.719226] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.719226] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.720257] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.722362] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.725373] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.725470] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.725473] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.725474] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.725476] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.725478] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.727548] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.729616] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.729618] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.729619] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.729620] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.731755] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.733909] [drm:drm_edid_to_eld] ELD monitor VX279 [ 1.733911] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.733912] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 1.733925] [drm:drm_mode_debug_printmodeline] Modeline 73:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.733926] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.733928] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.733930] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.733931] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.733933] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.733934] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.733936] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.733937] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.733939] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.733940] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.733941] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.733943] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.733944] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.733946] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.733947] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.733949] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.733950] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.733952] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.733953] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.733955] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.733956] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.733958] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.733959] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.733960] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.733962] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.733963] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.733965] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.733966] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.733968] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1.733969] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.733971] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.733972] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.733973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.733974] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.734442] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.735884] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.735885] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.735926] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.735928] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.735968] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.735969] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.737508] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.737510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.737511] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.737512] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.740113] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 1.742218] ata1.00: ATA-9: INTEL SSDSC2BW080A4, DC22, max UDMA/133 [ 1.742238] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.742262] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.742264] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.742265] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.742266] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.743382] [drm:intel_dp_probe_oui] Sink OUI: 4ce000 [ 1.745380] usb 1-2.1: New USB device found, idVendor=0b95, idProduct=7720 [ 1.745403] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.745423] usb 1-2.1: Product: AX88772 [ 1.745437] usb 1-2.1: SerialNumber: 00D91E [ 1.746406] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.747533] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.747538] [drm:drm_mode_debug_printmodeline] Modeline 80:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.747539] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 1.747541] [drm:drm_mode_debug_printmodeline] Modeline 88:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.747542] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.747543] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.747545] [drm:drm_mode_debug_printmodeline] Modeline 90:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.747546] [drm:drm_mode_debug_printmodeline] Modeline 89:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.747548] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.747549] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.747552] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.747553] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.747555] [drm:drm_mode_debug_printmodeline] Modeline 95:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.747556] [drm:drm_mode_debug_printmodeline] Modeline 98:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.747557] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.747558] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.747602] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.747603] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.747644] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.747645] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.747686] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.747687] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.747727] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.747728] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.747731] [drm:drm_setup_crtcs] [ 1.747732] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.747733] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.747734] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.747735] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.747736] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.747737] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping [ 1.747738] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.747739] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.747741] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:26:pipe A]: 1920x1080 [ 1.747741] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.747742] [drm:intel_fb_initial_config] connector DP-2 has no encoder or crtc, skipping [ 1.747743] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.747744] [drm:intel_fb_initial_config] fallback: Not all outputs enabled [ 1.747744] [drm:intel_fb_initial_config] Enabled: 1, detected: 3 [ 1.747745] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.747746] [drm:drm_target_preferred] looking for cmdline mode on connector 39 [ 1.747747] [drm:drm_target_preferred] looking for preferred mode on connector 39 0 [ 1.747748] [drm:drm_target_preferred] found mode 1920x1080 [ 1.747749] [drm:drm_target_preferred] looking for cmdline mode on connector 47 [ 1.747750] [drm:drm_target_preferred] looking for preferred mode on connector 47 0 [ 1.747750] [drm:drm_target_preferred] found mode 1920x1080 [ 1.747751] [drm:drm_target_preferred] looking for cmdline mode on connector 54 [ 1.747752] [drm:drm_target_preferred] looking for preferred mode on connector 54 0 [ 1.747753] [drm:drm_target_preferred] found mode 1920x1080 [ 1.747754] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.747758] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.747760] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 1.747761] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 1.747774] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 1.747775] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.747777] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 1.747778] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.747779] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 1.747782] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 1.747782] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 1.747784] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.747785] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880466ad9800 for pipe A [ 1.747786] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 1.747787] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.747788] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.747789] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 1.747790] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.747791] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.747792] [drm:intel_dump_pipe_config] requested mode: [ 1.747794] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.747794] [drm:intel_dump_pipe_config] adjusted mode: [ 1.747796] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.747797] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 1.747798] [drm:intel_dump_pipe_config] port clock: 270000 [ 1.747799] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.747800] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 1.747801] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.747802] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.747802] [drm:intel_dump_pipe_config] ips: 0 [ 1.747803] [drm:intel_dump_pipe_config] double wide: 0 [ 1.747805] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58 [ 1.747806] [drm:intel_dump_pipe_config] planes on this crtc [ 1.747807] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 1.747808] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 1.747810] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 1.747811] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 1.747811] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 1.747812] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 1.747813] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 1.747814] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.747815] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 148500KHz [ 1.747817] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1.747818] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1.747819] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.747820] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][modeset] config ffff880466ada000 for pipe B [ 1.747821] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 1.747821] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.747823] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.747824] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1.747825] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.747826] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 1.747826] [drm:intel_dump_pipe_config] requested mode: [ 1.747828] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.747828] [drm:intel_dump_pipe_config] adjusted mode: [ 1.747830] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.747831] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 1.747832] [drm:intel_dump_pipe_config] port clock: 162000 [ 1.747833] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.747834] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 1.747835] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.747836] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.747836] [drm:intel_dump_pipe_config] ips: 0 [ 1.747837] [drm:intel_dump_pipe_config] double wide: 0 [ 1.747838] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.747839] [drm:intel_dump_pipe_config] planes on this crtc [ 1.747840] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] disabled, scaler_id = -1 [ 1.747841] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 1.747842] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 1.747842] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 1.747843] [drm:connected_sink_compute_bpp] [CONNECTOR:54:DP-2] checking for sink bpp constrains [ 1.747844] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 1.747845] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 1.747847] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 1.747848] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 1.747849] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 1.747850] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][modeset] config ffff880466ada800 for pipe C [ 1.747851] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 1.747852] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 1.747853] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.747854] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 1.747855] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 1.747856] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.747857] [drm:intel_dump_pipe_config] requested mode: [ 1.747858] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.747859] [drm:intel_dump_pipe_config] adjusted mode: [ 1.747860] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.747862] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0xa [ 1.747862] [drm:intel_dump_pipe_config] port clock: 162000 [ 1.747863] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 1.747864] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0 [ 1.747865] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.747866] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.747867] [drm:intel_dump_pipe_config] ips: 0 [ 1.747867] [drm:intel_dump_pipe_config] double wide: 0 [ 1.747869] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0 [ 1.747869] [drm:intel_dump_pipe_config] planes on this crtc [ 1.747870] [drm:intel_dump_pipe_config] [PLANE:34:plane 1C] disabled, scaler_id = -1 [ 1.747871] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = -1 [ 1.747872] [drm:intel_dump_pipe_config] [PLANE:37:plane 2C] disabled, scaler_id = -1 [ 1.747873] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 1.747876] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 1.747877] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 1.747878] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 1.747880] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL A [ 1.747881] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 1.747882] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 1.747883] [drm:bxt_get_dpll] [CRTC:31:pipe B] using pre-allocated PORT PLL B [ 1.747884] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 1.747885] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 1.747885] [drm:skl_update_scaler] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.747887] [drm:bxt_get_dpll] [CRTC:36:pipe C] using pre-allocated PORT PLL C [ 1.747887] [drm:intel_reference_shared_dpll] using PORT PLL C for pipe C [ 1.747888] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36:pipe C] scaler_user index 2.31 [ 1.747889] [drm:skl_update_scaler] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 1.747907] [drm:intel_disable_pipe] disabling pipe A [ 1.749509] ata1.00: configured for UDMA/133 [ 1.749629] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW08 DC22 PQ: 0 ANSI: 5 [ 1.751971] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 1, on? 1) for crtc 26 [ 1.751979] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 1.751984] [drm:bxt_set_cdclk] Changing CDCLK to 288000 kHz (VCO 1152000 kHz) [ 1.758510] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.758530] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.758666] sd 0:0:0:0: [sda] Write Protect is off [ 1.758682] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.758717] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.759300] sda: sda1 sda2 sda3 [ 1.759550] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.760115] [drm:intel_update_cdclk] Current CD clock rate: 288000 kHz, VCO: 1152000 kHz, ref: 19200 kHz [ 1.760117] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 1.760119] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 1.760120] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 1.760120] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 1.760121] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 1.760122] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 1.760123] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 1.760124] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 1.760124] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 1.760125] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 1.760128] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 1.760129] [drm:verify_single_dpll_state] PORT PLL A [ 1.760130] [drm:verify_single_dpll_state] PORT PLL B [ 1.760131] [drm:verify_single_dpll_state] PORT PLL C [ 1.760137] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 1.760138] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 1.760175] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.760177] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 1.760180] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 0000006a [ 1.760181] [drm:wait_panel_status] Wait complete [ 1.760182] [drm:wait_panel_on] Wait for panel power on [ 1.760183] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control 0000006b [ 1.770333] usb 1-2.2: new high-speed USB device number 4 using xhci_hcd [ 1.798515] usb 1-2.2: New USB device found, idVendor=413c, idProduct=1010 [ 1.798539] usb 1-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.798559] usb 1-2.2: Product: USB 2.0 Hub [MTT] [ 1.798701] hub 1-2.2:1.0: USB hub found [ 1.798722] hub 1-2.2:1.0: 4 ports detected [ 1.812314] [drm:wait_panel_status] Wait complete [ 1.816176] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.817937] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.817939] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.818143] usb 1-2.3: new low-speed USB device number 5 using xhci_hcd [ 1.818189] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.820737] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.820784] [drm:skylake_pfit_enable] for crtc_state = ffff880466ad9800 [ 1.820833] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.820835] [drm:intel_enable_pipe] enabling pipe A [ 1.820847] [drm:intel_edp_backlight_on] [ 1.820848] [drm:intel_panel_enable_backlight] pipe A [ 1.820849] [drm:intel_panel_actually_set_backlight] set backlight PWM = 96000 [ 1.820851] [drm:intel_psr_enable] PSR not supported on this platform [ 1.820852] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 1.820878] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31 [ 1.820878] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 1.823631] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.823633] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.826024] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.831201] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.833231] [drm:skylake_pfit_enable] for crtc_state = ffff880466ada000 [ 1.833281] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.833283] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1.833284] [drm:intel_enable_pipe] enabling pipe B [ 1.833304] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:DDI B] [ 1.833305] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 28 bytes ELD [ 1.833326] [drm:intel_enable_shared_dpll] enable PORT PLL C (active 4, on? 0) for crtc 36 [ 1.833327] [drm:intel_enable_shared_dpll] enabling PORT PLL C [ 1.836438] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1.836440] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1.838848] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 1.843368] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 1.844669] [drm:skylake_pfit_enable] for crtc_state = ffff880466ada800 [ 1.844726] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 1.844727] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 1.844728] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 1.844730] [drm:intel_enable_pipe] enabling pipe C [ 1.845623] usb 1-2.3: New USB device found, idVendor=04b3, idProduct=310c [ 1.845648] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.845669] usb 1-2.3: Product: USB Optical Mouse [ 1.848883] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 1.848887] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 1.848898] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 1.848903] [drm:verify_single_dpll_state] PORT PLL A [ 1.848912] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 1.848914] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 1.848924] [drm:verify_single_dpll_state] PORT PLL B [ 1.848930] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 1.848932] [drm:verify_crtc_state] [CRTC:36:pipe C] [ 1.848942] [drm:verify_single_dpll_state] PORT PLL C [ 1.848957] [drm:drm_fb_helper_hotplug_event] [ 1.848959] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 1.848960] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 1.849054] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 1.849148] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.849253] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.849255] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 1.849257] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 1.849258] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 1.849260] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 1.849379] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 1.849470] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 1.849472] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.849473] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 1.849474] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 1.849690] [drm:intel_dp_probe_mst] Sink is not MST capable [ 1.849820] [drm:drm_edid_to_eld] ELD monitor VX279 [ 1.849822] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 1.849823] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 1.849835] [drm:drm_mode_debug_printmodeline] Modeline 117:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.849836] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.849838] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 1.849840] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.849841] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.849843] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.849844] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 1.849846] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 1.849847] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 1.849849] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 1.849850] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.849851] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.849853] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 1.849854] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.849856] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.849857] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.849859] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 1.849860] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 1.849862] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.849863] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 1.849865] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.849866] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.849868] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 1.849869] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.849871] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 1.849872] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 1.849874] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 1.849875] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 1.849877] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.849878] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 1.849880] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 1.849881] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.849882] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.849883] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 1.849884] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 1.849929] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.849930] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.849971] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.849973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.850014] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.850015] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.850055] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.850057] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 1.850058] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 1.850059] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 1.850296] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 1.850501] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 1.850502] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 1.850503] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.850504] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.850721] [drm:intel_dp_probe_oui] Sink OUI: 4ce000 [ 1.850926] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 1.851143] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.851147] [drm:drm_mode_debug_printmodeline] Modeline 41:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 1.851148] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 1.851149] [drm:drm_mode_debug_printmodeline] Modeline 109:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 1.851150] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 1.851151] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 1.851153] [drm:drm_mode_debug_printmodeline] Modeline 90:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 1.851154] [drm:drm_mode_debug_printmodeline] Modeline 89:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 1.851156] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.851157] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 1.851159] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.851160] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.851162] [drm:drm_mode_debug_printmodeline] Modeline 95:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.851163] [drm:drm_mode_debug_printmodeline] Modeline 98:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.851164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 1.851165] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 1.851209] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.851210] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.851250] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.851251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.851293] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.851294] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.851332] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.851333] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 1.851335] [drm:drm_setup_crtcs] [ 1.851336] [drm:drm_enable_connectors] connector 39 enabled? yes [ 1.851337] [drm:drm_enable_connectors] connector 47 enabled? yes [ 1.851338] [drm:drm_enable_connectors] connector 51 enabled? no [ 1.851339] [drm:drm_enable_connectors] connector 54 enabled? yes [ 1.851340] [drm:drm_enable_connectors] connector 58 enabled? no [ 1.851341] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 1.851342] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 1.851343] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 1.851344] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 1.851345] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 1.851346] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:31:pipe B]: 1920x1080 [ 1.851347] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 1.851348] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 1.851349] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 1.851350] [drm:intel_fb_initial_config] using first mode listed on connector DP-2 [ 1.851351] [drm:intel_fb_initial_config] connector DP-2 on [CRTC:36:pipe C]: 1920x1080 [ 1.851352] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 1.851353] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 1.851354] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 1.851355] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 1.851367] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 1.851368] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 1.851369] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 1.873669] usb 1-2.2.4: new low-speed USB device number 6 using xhci_hcd [ 1.938927] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large: [ 1.939987] clocksource: 'hpet' wd_now: 91e5825 wd_last: 88c79b5 mask: ffffffff [ 1.941043] clocksource: 'tsc' cs_now: a79b80a61 cs_last: a593d832c mask: ffffffffffffffff [ 1.941488] usb 1-2.2.4: New USB device found, idVendor=413c, idProduct=2110 [ 1.941489] usb 1-2.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.941489] usb 1-2.2.4: Product: Dell Wired Multimedia Keyboard [ 1.941490] usb 1-2.2.4: Manufacturer: Dell [ 1.974054] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 1.975290] systemd[1]: Detected architecture x86-64. [ 1.981417] systemd[1]: Set hostname to . [ 1.983914] [drm] RC6 on [ 2.013981] systemd[1]: Reached target Encrypted Volumes. [ 2.016701] systemd[1]: Reached target Remote File Systems (Pre). [ 2.019356] systemd[1]: Listening on Journal Socket. [ 2.022002] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.024662] systemd[1]: Reached target Remote File Systems. [ 2.027380] systemd[1]: Created slice System Slice. [ 2.030127] systemd[1]: Created slice system-getty.slice. [ 2.032841] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.043931] systemd[1]: Started Read required files in advance. [ 2.047038] systemd[1]: Mounting Debug File System... [ 2.050099] systemd[1]: Mounting POSIX Message Queue File System... [ 2.052844] systemd[1]: Listening on udev Control Socket. [ 2.055656] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.058607] systemd[1]: Listening on udev Kernel Socket. [ 2.061605] systemd[1]: Mounting Huge Pages File System... [ 2.064617] systemd[1]: Started Braille Device Support. [ 2.067477] systemd[1]: Listening on Syslog Socket. [ 2.070230] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.073018] systemd[1]: Created slice User and Session Slice. [ 2.075781] systemd[1]: Reached target Slices. [ 2.082196] systemd[1]: Starting Uncomplicated firewall... [ 2.085282] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.088143] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.090979] systemd[1]: Listening on Journal Audit Socket. [ 2.094225] systemd[1]: Starting Load Kernel Modules... [ 2.097027] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.099279] lp: driver loaded but no devices found [ 2.101293] systemd[1]: Starting Journal Service... [ 2.101592] ppdev: user-space parallel port driver [ 2.106234] systemd[1]: Mounted Huge Pages File System. [ 2.108905] systemd[1]: Mounted Debug File System. [ 2.111503] systemd[1]: Mounted POSIX Message Queue File System. [ 2.114059] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED [ 2.115378] systemd[1]: ureadahead.service: Unit entered failed state. [ 2.116484] systemd[1]: ureadahead.service: Failed with result 'exit-code'. [ 2.118031] systemd[1]: Started Uncomplicated firewall. [ 2.120720] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.123453] systemd[1]: Started Load Kernel Modules. [ 2.145337] systemd[1]: Mounting FUSE Control File System... [ 2.147967] systemd[1]: Starting Apply Kernel Variables... [ 2.150605] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.152612] systemd[1]: Mounted FUSE Control File System. [ 2.153863] systemd[1]: Started Journal Service. [ 2.192117] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 2.206843] systemd-journald[254]: Received request to flush runtime journal from PID 1 [ 2.299422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.306147] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=28800/96000 [ 2.306150] [drm:intel_panel_actually_set_backlight] set backlight PWM = 28800 [ 2.318685] usbcore: registered new interface driver usbhid [ 2.318688] usbhid: USB HID core driver [ 2.357181] Adding 3994620k swap on /dev/sda3. Priority:-1 extents:1 across:3994620k SSFS [ 2.386880] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.399420] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.399421] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.399422] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 2.399423] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.399423] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.399424] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 2.406606] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input5 [ 2.406646] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6 [ 2.406683] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7 [ 2.406723] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8 [ 2.406764] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9 [ 2.446727] SSE version of gcm_enc/dec engaged. [ 2.468309] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 2.468314] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 2.473529] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 2.473530] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 2.473531] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 2.481524] audit: type=1400 audit(1467321489.355:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=473 comm="apparmor_parser" [ 2.482758] audit: type=1400 audit(1467321489.355:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=470 comm="apparmor_parser" [ 2.482763] audit: type=1400 audit(1467321489.355:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser" [ 2.482766] audit: type=1400 audit(1467321489.355:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=470 comm="apparmor_parser" [ 2.482768] audit: type=1400 audit(1467321489.355:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser" [ 2.488358] audit: type=1400 audit(1467321489.387:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=481 comm="apparmor_parser" [ 2.490024] audit: type=1400 audit(1467321489.387:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=469 comm="apparmor_parser" [ 2.490028] audit: type=1400 audit(1467321489.387:9): apparmor="STATUS" operation="profile_load" name="chromium" pid=469 comm="apparmor_parser" [ 2.490731] audit: type=1400 audit(1467321489.387:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=485 comm="apparmor_parser" [ 2.491345] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 2.491362] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 2.491362] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 2.497225] input: USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:04B3:310C.0001/input/input10 [ 2.497301] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:15.0-2.3/input0 [ 2.497384] input: Dell Dell Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.0/0003:413C:2110.0002/input/input11 [ 2.511804] hid-generic 0003:413C:2110.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:15.0-2.2.4/input0 [ 2.511937] input: Dell Dell Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2.4/1-2.2.4:1.1/0003:413C:2110.0003/input/input12 [ 2.526337] hid-generic 0003:413C:2110.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:15.0-2.2.4/input1 [ 2.545904] random: nonblocking pool is initialized [ 2.556179] dw-apb-uart.8: ttyS4 at MMIO 0x9222c000 (irq = 4, base_baud = 115200) is a 16550A [ 2.582452] dw-apb-uart.9: ttyS5 at MMIO 0x9222e000 (irq = 5, base_baud = 115200) is a 16550A [ 2.607985] dw-apb-uart.10: ttyS6 at MMIO 0x92230000 (irq = 6, base_baud = 115200) is a 16550A [ 2.611770] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.611780] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.611792] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.611803] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration [ 2.611804] i2c_hid i2c-ELAN221D:00: hid_descr_cmd failed [ 2.641870] dw-apb-uart.11: ttyS7 at MMIO 0x92232000 (irq = 7, base_baud = 115200) is a 16550A [ 2.663757] i2c_hid i2c-ALPS0001:00: hid_descr_cmd failed [ 2.755485] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2.778218] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2.795307] asix 1-2.1:1.0 eth0: register 'asix' at usb-0000:00:15.0-2.1, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:c2:a7 [ 2.797489] usbcore: registered new interface driver asix [ 2.799688] asix 1-2.1:1.0 enx00106031c2a7: renamed from eth0 [ 2.826553] asix 1-2.1:1.0 enx00106031c2a7: link down [ 2.826868] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2a7: link is not ready [ 3.252298] IPv6: ADDRCONF(NETDEV_CHANGE): enx00106031c2a7: link becomes ready [ 3.252412] asix 1-2.1:1.0 enx00106031c2a7: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 5.430545] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 5.430546] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 5.430547] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 10.139045] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 10.139046] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 10.139047] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 10.448791] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 10.448793] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 10.448793] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 46.298320] prime_busy: executing [ 46.298372] [drm:i915_gem_open] [ 46.298470] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.298472] [drm:i915_pages_create_for_stolen] offset=0x7f9000, size=16384 [ 46.298554] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.298556] [drm:i915_pages_create_for_stolen] offset=0x7fd000, size=16384 [ 46.298571] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.298573] [drm:i915_pages_create_for_stolen] offset=0x801000, size=16384 [ 46.298585] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.298587] [drm:i915_pages_create_for_stolen] offset=0x805000, size=16384 [ 46.298848] [drm:i915_gem_open] [ 46.298918] prime_busy: starting subtest before-blt [ 46.300447] prime_busy: exiting, ret=99 [ 46.300516] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.300518] [drm:i915_pages_create_for_stolen] offset=0x809000, size=16384 [ 46.300590] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.300592] [drm:i915_pages_create_for_stolen] offset=0x80d000, size=16384 [ 46.300609] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.300610] [drm:i915_pages_create_for_stolen] offset=0x811000, size=16384 [ 46.300621] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 46.300622] [drm:i915_pages_create_for_stolen] offset=0x815000, size=16384 [ 63.490130] [drm] stuck on blitter ring [ 63.491329] [drm] GPU HANG: ecode 9:1:0xeffffff1, in prime_busy [1390], reason: Engine(s) hung, action: reset [ 63.491330] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 63.491330] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 63.491330] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 63.491330] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 63.491331] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 63.491432] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 63.491433] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 63.491434] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 63.491599] [drm:i915_reset_and_wakeup] resetting chip [ 63.512211] drm/i915: Resetting chip after gpu hang [ 63.512216] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 63.512236] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 63.512251] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 63.512267] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 63.512281] [drm:intel_guc_setup] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load SUCCESS [ 63.512283] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load PENDING [ 63.548503] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x8002f0ec [ 63.548505] [drm:guc_ucode_xfer_dma] returning 0 [ 63.548507] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load SUCCESS [ 63.548521] [drm:select_doorbell_register] assigned normal priority doorbell id 0x0 [ 63.548523] [drm:select_doorbell_cacheline] selected doorbell cacheline 0x40, next 0x80, linesize 64 [ 63.548531] [drm:guc_client_alloc] new priority 2 client ffff880466c6c280: ctx_index 0 [ 63.548532] [drm:guc_client_alloc] doorbell id 0, cacheline offset 0x40 [ 63.964217] [drm] RC6 on [ 149.153770] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 149.153771] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 149.153773] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 149.153774] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 149.153777] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 149.153778] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 149.153779] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 149.153781] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff88046b447000 for pipe A [ 149.153781] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 149.153782] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 149.153783] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 149.153784] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 149.153785] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 149.153785] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 149.153786] [drm:intel_dump_pipe_config] requested mode: [ 149.153788] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 149.153788] [drm:intel_dump_pipe_config] adjusted mode: [ 149.153789] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 149.153791] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 149.153791] [drm:intel_dump_pipe_config] port clock: 270000 [ 149.153792] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 149.153793] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 149.153793] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 149.153794] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 149.153795] [drm:intel_dump_pipe_config] ips: 0 [ 149.153795] [drm:intel_dump_pipe_config] double wide: 0 [ 149.153797] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 149.153797] [drm:intel_dump_pipe_config] planes on this crtc [ 149.153799] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 149.153801] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 149.153801] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 149.153801] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 149.153802] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 149.153803] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 149.153804] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 149.153807] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 149.153809] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL A [ 149.153809] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 149.153810] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 149.153825] [drm:intel_edp_backlight_off] [ 149.253850] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 149.253856] [drm:intel_disable_pipe] disabling pipe A [ 149.257879] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 149.257881] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 149.257931] [drm:edp_panel_off] Turn eDP port A panel power off [ 149.257933] [drm:wait_panel_off] Wait for panel power off time [ 149.257935] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000060 [ 149.271020] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 149.271022] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 149.271022] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 149.271036] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 149.277936] [drm:wait_panel_status] Wait complete [ 149.277938] [drm:intel_disable_shared_dpll] disable PORT PLL A (active 1, on? 1) for crtc 26 [ 149.277944] [drm:intel_disable_shared_dpll] disabling PORT PLL A [ 149.277951] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 149.277952] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 149.277954] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 149.277955] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 149.277956] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 149.277956] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 149.277957] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 149.277957] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 149.277958] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 149.277958] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 149.277959] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 149.277960] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 149.277962] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 149.277964] [drm:verify_single_dpll_state] PORT PLL A [ 149.277965] [drm:verify_single_dpll_state] PORT PLL B [ 149.277969] [drm:verify_single_dpll_state] PORT PLL C [ 149.277979] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 149.277980] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 149.278000] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 149.278002] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 149.278017] [drm:intel_power_well_disable] disabling dpio-common-a [ 149.278019] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 149.278020] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 149.278022] [drm:verify_single_dpll_state] PORT PLL A [ 149.279717] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe C FIFO underrun [ 149.279742] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun [ 149.280430] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 149.280431] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 149.280432] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 148500KHz [ 149.280434] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 149.280434] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 149.280435] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 149.280436] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][modeset] config ffff88046b442000 for pipe B [ 149.280437] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 149.280437] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 149.280438] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 149.280439] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 149.280440] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 149.280441] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 149.280441] [drm:intel_dump_pipe_config] requested mode: [ 149.280443] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 149.280443] [drm:intel_dump_pipe_config] adjusted mode: [ 149.280445] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 149.280446] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 149.280446] [drm:intel_dump_pipe_config] port clock: 162000 [ 149.280447] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 149.280448] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 149.280449] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 149.280449] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 149.280450] [drm:intel_dump_pipe_config] ips: 0 [ 149.280450] [drm:intel_dump_pipe_config] double wide: 0 [ 149.280452] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 149.280452] [drm:intel_dump_pipe_config] planes on this crtc [ 149.280454] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] enabled [ 149.280455] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 149.280455] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 149.280456] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 149.280457] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 149.280458] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 149.280459] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 149.280460] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 149.280462] [drm:bxt_get_dpll] [CRTC:31:pipe B] using pre-allocated PORT PLL B [ 149.280462] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 149.280463] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 149.280472] [drm:hsw_audio_codec_disable] Disable audio codec on pipe B [ 149.280486] [drm:intel_disable_pipe] disabling pipe B [ 149.286560] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 2, on? 1) for crtc 31 [ 149.286565] [drm:intel_disable_shared_dpll] disabling PORT PLL B [ 149.286568] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 149.286570] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 149.286570] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 149.286571] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 149.286571] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 149.286572] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 149.286572] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 149.286573] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 149.286573] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 149.286574] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 149.286574] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 149.286576] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 149.286578] [drm:verify_single_dpll_state] PORT PLL A [ 149.286578] [drm:verify_single_dpll_state] PORT PLL B [ 149.286579] [drm:verify_single_dpll_state] PORT PLL C [ 149.286585] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 149.286588] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 149.286604] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 149.286606] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 149.286610] [drm:verify_single_dpll_state] PORT PLL B [ 149.287769] [drm:connected_sink_compute_bpp] [CONNECTOR:54:DP-2] checking for sink bpp constrains [ 149.287770] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 149.287771] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 149.287774] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 149.287775] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 149.287776] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 149.287777] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][modeset] config ffff88046b444800 for pipe C [ 149.287777] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 149.287778] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 149.287779] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 149.287780] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 149.287781] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 149.287781] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 149.287782] [drm:intel_dump_pipe_config] requested mode: [ 149.287783] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 149.287784] [drm:intel_dump_pipe_config] adjusted mode: [ 149.287785] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 149.287786] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0xa [ 149.287787] [drm:intel_dump_pipe_config] port clock: 162000 [ 149.287787] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 149.287788] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: -1 [ 149.287789] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 149.287790] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 149.287790] [drm:intel_dump_pipe_config] ips: 0 [ 149.287790] [drm:intel_dump_pipe_config] double wide: 0 [ 149.287792] [drm:intel_dump_pipe_config] ddi_pll_sel: 2; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 149.287792] [drm:intel_dump_pipe_config] planes on this crtc [ 149.287794] [drm:intel_dump_pipe_config] [PLANE:34:plane 1C] enabled [ 149.287796] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 149.287796] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 149.287796] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = -1 [ 149.287797] [drm:intel_dump_pipe_config] [PLANE:37:plane 2C] disabled, scaler_id = -1 [ 149.287799] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 144000 [ 149.287800] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 149.287802] [drm:bxt_get_dpll] [CRTC:36:pipe C] using pre-allocated PORT PLL C [ 149.287802] [drm:intel_reference_shared_dpll] using PORT PLL C for pipe C [ 149.287803] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36:pipe C] scaler_user index 2.31 [ 149.287814] [drm:intel_disable_pipe] disabling pipe C [ 149.293949] [drm:intel_disable_shared_dpll] disable PORT PLL C (active 4, on? 1) for crtc 36 [ 149.293953] [drm:intel_disable_shared_dpll] disabling PORT PLL C [ 149.293955] [drm:bxt_set_cdclk] Changing CDCLK to 144000 kHz (VCO 1152000 kHz) [ 149.297960] [drm:intel_update_cdclk] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz [ 149.297961] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 149.297961] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 149.297962] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 149.297962] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 149.297963] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 149.297963] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 149.297964] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 149.297965] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 149.297965] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 149.297966] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 149.297967] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 149.297968] [drm:verify_single_dpll_state] PORT PLL A [ 149.297969] [drm:verify_single_dpll_state] PORT PLL B [ 149.297970] [drm:verify_single_dpll_state] PORT PLL C [ 149.297972] [drm:intel_power_well_disable] disabling dpio-common-bc [ 149.297973] [drm:intel_power_well_disable] disabling power well 2 [ 149.297976] [drm:skl_set_power_well] Disabling power well 2 [ 149.297978] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 149.297979] [drm:verify_crtc_state] [CRTC:36:pipe C] [ 149.297980] [drm:verify_single_dpll_state] PORT PLL C [ 149.297981] [drm:intel_power_well_disable] disabling DC off [ 149.297982] [drm:gen9_enable_dc5] Enabling DC5 [ 149.297983] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 149.297985] [drm:intel_power_well_disable] disabling always-on [ 151.698802] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000010, dig 0x18001819, pins 0x00000020 [ 151.698804] [drm:intel_hpd_irq_handler] digital hpd port B - short [ 151.699164] [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [ 151.699167] [drm:intel_power_well_enable] enabling always-on [ 151.699169] [drm:intel_power_well_enable] enabling DC off [ 151.699232] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 151.699235] [drm:intel_power_well_enable] enabling power well 2 [ 151.699237] [drm:skl_set_power_well] Enabling power well 2 [ 151.699241] [drm:intel_power_well_enable] enabling dpio-common-bc [ 151.699242] [drm:intel_power_well_enable] enabling dpio-common-a [ 151.768117] [drm:intel_power_well_disable] disabling dpio-common-a [ 151.768251] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.768446] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.768528] [drm:intel_power_well_disable] disabling dpio-common-bc [ 151.768530] [drm:intel_power_well_disable] disabling power well 2 [ 151.768534] [drm:skl_set_power_well] Disabling power well 2 [ 151.768536] [drm:intel_power_well_disable] disabling DC off [ 151.768538] [drm:gen9_enable_dc5] Enabling DC5 [ 151.768539] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 151.768541] [drm:intel_power_well_disable] disabling always-on [ 151.768545] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 151.768547] [drm:i915_hotplug_work_func] Connector DP-1 (pin 5) received hotplug event. [ 151.768549] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 151.768550] [drm:intel_power_well_enable] enabling always-on [ 151.768551] [drm:intel_power_well_enable] enabling DC off [ 151.768665] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 151.768668] [drm:intel_power_well_enable] enabling power well 2 [ 151.768669] [drm:skl_set_power_well] Enabling power well 2 [ 151.768673] [drm:intel_power_well_enable] enabling dpio-common-bc [ 151.768674] [drm:intel_power_well_enable] enabling dpio-common-a [ 151.769780] [drm:intel_power_well_disable] disabling dpio-common-a [ 151.769890] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.769969] [drm:intel_power_well_disable] disabling dpio-common-bc [ 151.769971] [drm:intel_power_well_disable] disabling power well 2 [ 151.769974] [drm:skl_set_power_well] Disabling power well 2 [ 151.769976] [drm:intel_power_well_disable] disabling DC off [ 151.769977] [drm:gen9_enable_dc5] Enabling DC5 [ 151.769979] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 151.769981] [drm:intel_power_well_disable] disabling always-on [ 151.769982] [drm:intel_hpd_irq_event] [CONNECTOR:47:DP-1] status updated from connected to disconnected [ 151.769984] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 151.769985] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 151.769986] [drm:intel_power_well_enable] enabling always-on [ 151.769987] [drm:intel_power_well_enable] enabling DC off [ 151.770105] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 151.770108] [drm:intel_power_well_enable] enabling power well 2 [ 151.770109] [drm:skl_set_power_well] Enabling power well 2 [ 151.770152] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.770153] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.770192] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.770193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 151.770232] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 151.770234] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.770272] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 151.770274] [drm:intel_power_well_disable] disabling power well 2 [ 151.770277] [drm:skl_set_power_well] Disabling power well 2 [ 151.770278] [drm:intel_power_well_disable] disabling DC off [ 151.770280] [drm:gen9_enable_dc5] Enabling DC5 [ 151.770281] [drm:gen9_set_dc_state] Setting DC state from 00 to 01 [ 151.770283] [drm:intel_power_well_disable] disabling always-on [ 151.770299] [drm:drm_fb_helper_hotplug_event] [ 151.770301] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 151.770302] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 151.770303] [drm:intel_power_well_enable] enabling always-on [ 151.770304] [drm:intel_power_well_enable] enabling DC off [ 151.770407] [drm:gen9_set_dc_state] Setting DC state from 01 to 00 [ 151.770410] [drm:intel_power_well_enable] enabling dpio-common-a [ 151.772706] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 151.772709] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 151.772712] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000060 [ 151.772713] [drm:wait_panel_status] Wait complete [ 151.772715] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 [ 151.772717] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled [ 151.799488] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010 [ 151.799490] [drm:intel_hpd_irq_handler] digital hpd port A - long [ 151.799491] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0 [ 151.799511] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A [ 151.811614] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000010, dig 0x18001819, pins 0x00000020 [ 151.811616] [drm:intel_hpd_irq_handler] digital hpd port B - short [ 151.811633] [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [ 151.811635] [drm:intel_power_well_enable] enabling power well 2 [ 151.811637] [drm:skl_set_power_well] Enabling power well 2 [ 151.811640] [drm:intel_power_well_enable] enabling dpio-common-bc [ 151.845683] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 151.845766] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 151.845862] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 151.845865] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 151.845867] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 151.845869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 151.845871] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 151.845967] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.846048] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 151.846050] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 151.846052] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 151.846053] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 151.846268] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.846349] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 151.846351] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 151.846352] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 151.846354] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 151.846541] [drm:intel_dp_probe_mst] Sink is not MST capable [ 151.846650] [drm:drm_dp_i2c_do_msg] native defer [ 151.847074] [drm:drm_dp_i2c_do_msg] native defer [ 151.847820] [drm:drm_dp_i2c_do_msg] native defer [ 151.848869] [drm:drm_dp_i2c_do_msg] native defer [ 151.849218] [drm:drm_dp_i2c_do_msg] native defer [ 151.849966] [drm:drm_dp_i2c_do_msg] native defer [ 151.850310] [drm:drm_dp_i2c_do_msg] native defer [ 151.851080] [drm:drm_dp_i2c_do_msg] native defer [ 151.851826] [drm:drm_dp_i2c_do_msg] native defer [ 151.852671] [drm:drm_dp_i2c_do_msg] native defer [ 151.853482] [drm:drm_dp_i2c_do_msg] native defer [ 151.854285] [drm:drm_dp_i2c_do_msg] native defer [ 151.855088] [drm:drm_dp_i2c_do_msg] native defer [ 151.855877] [drm:drm_dp_i2c_do_msg] native defer [ 151.856397] [drm:drm_dp_i2c_do_msg] native defer [ 151.857203] [drm:drm_dp_i2c_do_msg] native defer [ 151.858014] [drm:drm_dp_i2c_do_msg] native defer [ 151.858762] [drm:drm_dp_i2c_do_msg] native defer [ 151.859468] [drm:drm_dp_i2c_do_msg] native defer [ 151.860242] [drm:drm_dp_i2c_do_msg] native defer [ 151.861073] [drm:drm_dp_i2c_do_msg] native defer [ 151.861863] [drm:drm_dp_i2c_do_msg] native defer [ 151.862450] [drm:drm_dp_i2c_do_msg] native defer [ 151.863254] [drm:drm_dp_i2c_do_msg] native defer [ 151.864060] [drm:drm_dp_i2c_do_msg] native defer [ 151.864849] [drm:drm_dp_i2c_do_msg] native defer [ 151.865633] [drm:drm_dp_i2c_do_msg] native defer [ 151.866646] [drm:drm_dp_i2c_do_msg] native defer [ 151.867054] [drm:drm_dp_i2c_do_msg] native defer [ 151.867712] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 151.867970] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.868052] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 151.868055] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 151.868056] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 151.868058] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 151.868247] [drm:intel_dp_probe_mst] Sink is not MST capable [ 151.868357] [drm:drm_dp_i2c_do_msg] native defer [ 151.869170] [drm:drm_dp_i2c_do_msg] native defer [ 151.869946] [drm:drm_dp_i2c_do_msg] native defer [ 151.870697] [drm:drm_dp_i2c_do_msg] native defer [ 151.871012] [drm:drm_dp_i2c_do_msg] native defer [ 151.871787] [drm:drm_dp_i2c_do_msg] native defer [ 151.872540] [drm:drm_dp_i2c_do_msg] native defer [ 151.873412] [drm:drm_dp_i2c_do_msg] native defer [ 151.874182] [drm:drm_dp_i2c_do_msg] native defer [ 151.874987] [drm:drm_dp_i2c_do_msg] native defer [ 151.875792] [drm:drm_dp_i2c_do_msg] native defer [ 151.876575] [drm:drm_dp_i2c_do_msg] native defer [ 151.877206] [drm:drm_dp_i2c_do_msg] native defer [ 151.878009] [drm:drm_dp_i2c_do_msg] native defer [ 151.878813] [drm:drm_dp_i2c_do_msg] native defer [ 151.879598] [drm:drm_dp_i2c_do_msg] native defer [ 151.879979] [drm:drm_dp_i2c_do_msg] native defer [ 151.880746] [drm:drm_dp_i2c_do_msg] native defer [ 151.881499] [drm:drm_dp_i2c_do_msg] native defer [ 151.882048] [drm:drm_dp_i2c_do_msg] native defer [ 151.882818] [drm:drm_dp_i2c_do_msg] native defer [ 151.883604] [drm:drm_dp_i2c_do_msg] native defer [ 151.884388] [drm:drm_dp_i2c_do_msg] native defer [ 151.885357] [drm:drm_dp_i2c_do_msg] native defer [ 151.885860] [drm:drm_dp_i2c_do_msg] native defer [ 151.886662] [drm:drm_dp_i2c_do_msg] native defer [ 151.887446] [drm:drm_dp_i2c_do_msg] native defer [ 151.888023] [drm:drm_dp_i2c_do_msg] native defer [ 151.888822] [drm:drm_dp_i2c_do_msg] native defer [ 151.889484] [drm:drm_detect_monitor_audio] Monitor has basic audio support [ 151.889607] [drm:intel_power_well_disable] disabling dpio-common-bc [ 151.889609] [drm:intel_power_well_disable] disabling power well 2 [ 151.889612] [drm:skl_set_power_well] Disabling power well 2 [ 151.889615] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] status updated from disconnected to connected [ 151.889662] [drm:drm_edid_to_eld] ELD monitor VX279 [ 151.889664] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 151.889665] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 151.889683] [drm:drm_mode_debug_printmodeline] Modeline 117:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 151.889684] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 151.889687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 151.889690] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 151.889692] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 151.889694] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 151.889696] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 151.889698] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 151.889700] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 151.889702] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 151.889704] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 151.889706] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 151.889708] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 151.889710] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 151.889712] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 151.889714] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 151.889716] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 151.889718] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 151.889720] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 151.889722] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 151.889725] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 151.889727] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 151.889729] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 151.889731] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 151.889733] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 151.889735] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 151.889737] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 151.889739] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 151.889741] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 151.889743] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 151.889745] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 151.889747] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 151.889749] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 151.889750] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 151.889752] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 151.889753] [drm:intel_power_well_enable] enabling power well 2 [ 151.889754] [drm:skl_set_power_well] Enabling power well 2 [ 151.889798] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.889800] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.889839] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.889841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 151.889881] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 151.889882] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.889921] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 151.889923] [drm:intel_power_well_disable] disabling power well 2 [ 151.889926] [drm:skl_set_power_well] Disabling power well 2 [ 151.889928] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 151.889930] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 151.889931] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 151.889933] [drm:intel_power_well_enable] enabling power well 2 [ 151.889934] [drm:skl_set_power_well] Enabling power well 2 [ 151.889937] [drm:intel_power_well_enable] enabling dpio-common-bc [ 151.890308] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 151.890503] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 151.890505] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 151.890506] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 151.890508] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 151.890707] [drm:intel_dp_probe_oui] Sink OUI: 4ce000 [ 151.890906] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 151.891110] [drm:intel_power_well_disable] disabling dpio-common-bc [ 151.891112] [drm:intel_power_well_disable] disabling power well 2 [ 151.891116] [drm:skl_set_power_well] Disabling power well 2 [ 151.891124] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 151.891128] [drm:drm_mode_debug_printmodeline] Modeline 61:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 151.891129] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 151.891131] [drm:drm_mode_debug_printmodeline] Modeline 109:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 151.891133] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 151.891134] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 151.891136] [drm:drm_mode_debug_printmodeline] Modeline 90:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 151.891138] [drm:drm_mode_debug_printmodeline] Modeline 89:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 151.891140] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 151.891142] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 151.891144] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 151.891146] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 151.891148] [drm:drm_mode_debug_printmodeline] Modeline 95:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 151.891150] [drm:drm_mode_debug_printmodeline] Modeline 98:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 151.891152] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 151.891153] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 151.891154] [drm:intel_power_well_enable] enabling power well 2 [ 151.891156] [drm:skl_set_power_well] Enabling power well 2 [ 151.891198] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 151.891200] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 151.891239] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 151.891241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 151.891280] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 151.891282] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 151.891321] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 151.891323] [drm:intel_power_well_disable] disabling power well 2 [ 151.891326] [drm:skl_set_power_well] Disabling power well 2 [ 151.891328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 151.891332] [drm:drm_setup_crtcs] [ 151.891333] [drm:drm_enable_connectors] connector 39 enabled? yes [ 151.891335] [drm:drm_enable_connectors] connector 47 enabled? yes [ 151.891336] [drm:drm_enable_connectors] connector 51 enabled? no [ 151.891337] [drm:drm_enable_connectors] connector 54 enabled? yes [ 151.891338] [drm:drm_enable_connectors] connector 58 enabled? no [ 151.891340] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 151.891342] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 151.891343] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 151.891345] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 151.891346] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 151.891348] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:31:pipe B]: 1920x1080 [ 151.891349] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 151.891350] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 151.891351] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 151.891353] [drm:intel_fb_initial_config] using first mode listed on connector DP-2 [ 151.891354] [drm:intel_fb_initial_config] connector DP-2 on [CRTC:36:pipe C]: 1920x1080 [ 151.891355] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 151.891357] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 151.891359] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 151.891360] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 151.891375] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains [ 151.891377] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 151.891380] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 151.891381] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz [ 151.891384] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24 [ 151.891385] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000 [ 151.891387] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 151.891389] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff88046b419000 for pipe A [ 151.891391] [drm:intel_dump_pipe_config] cpu_transcoder: EDP [ 151.891392] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 151.891393] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 151.891395] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 [ 151.891397] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 151.891398] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 151.891399] [drm:intel_dump_pipe_config] requested mode: [ 151.891401] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 151.891402] [drm:intel_dump_pipe_config] adjusted mode: [ 151.891404] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 151.891406] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa [ 151.891407] [drm:intel_dump_pipe_config] port clock: 270000 [ 151.891408] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 151.891409] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 151.891411] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 151.891412] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 151.891413] [drm:intel_dump_pipe_config] ips: 0 [ 151.891414] [drm:intel_dump_pipe_config] double wide: 0 [ 151.891416] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 151.891417] [drm:intel_dump_pipe_config] planes on this crtc [ 151.891419] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled [ 151.891421] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 151.891423] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 151.891424] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 151.891425] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 151.891426] [drm:intel_dump_pipe_config] [PLANE:28:plane 3A] disabled, scaler_id = -1 [ 151.891428] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains [ 151.891429] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 151.891431] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 148500KHz [ 151.891433] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 151.891434] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 151.891435] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 151.891437] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][modeset] config ffff88046b418800 for pipe B [ 151.891438] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 151.891439] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 151.891441] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 151.891442] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 151.891444] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 151.891445] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0 [ 151.891446] [drm:intel_dump_pipe_config] requested mode: [ 151.891448] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 151.891449] [drm:intel_dump_pipe_config] adjusted mode: [ 151.891451] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 151.891453] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 151.891454] [drm:intel_dump_pipe_config] port clock: 162000 [ 151.891455] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 151.891456] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 151.891458] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 151.891459] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 151.891460] [drm:intel_dump_pipe_config] ips: 0 [ 151.891461] [drm:intel_dump_pipe_config] double wide: 0 [ 151.891463] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 151.891464] [drm:intel_dump_pipe_config] planes on this crtc [ 151.891465] [drm:intel_dump_pipe_config] [PLANE:29:plane 1B] enabled [ 151.891467] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 151.891469] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 151.891470] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = -1 [ 151.891471] [drm:intel_dump_pipe_config] [PLANE:32:plane 2B] disabled, scaler_id = -1 [ 151.891472] [drm:intel_dump_pipe_config] [PLANE:33:plane 3B] disabled, scaler_id = -1 [ 151.891474] [drm:connected_sink_compute_bpp] [CONNECTOR:54:DP-2] checking for sink bpp constrains [ 151.891475] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 [ 151.891476] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 151.891479] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 151.891480] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400 [ 151.891482] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 151.891483] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][modeset] config ffff88046b419800 for pipe C [ 151.891485] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 151.891486] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 151.891487] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 151.891489] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 151.891490] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 151.891491] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 151.891492] [drm:intel_dump_pipe_config] requested mode: [ 151.891494] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 151.891495] [drm:intel_dump_pipe_config] adjusted mode: [ 151.891497] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 151.891499] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0xa [ 151.891501] [drm:intel_dump_pipe_config] port clock: 162000 [ 151.891502] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 [ 151.891503] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: -1 [ 151.891504] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 151.891505] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 151.891506] [drm:intel_dump_pipe_config] ips: 0 [ 151.891507] [drm:intel_dump_pipe_config] double wide: 0 [ 151.891510] [drm:intel_dump_pipe_config] ddi_pll_sel: 2; dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d [ 151.891511] [drm:intel_dump_pipe_config] planes on this crtc [ 151.891512] [drm:intel_dump_pipe_config] [PLANE:34:plane 1C] enabled [ 151.891513] [drm:intel_dump_pipe_config] FB:60, fb = 1920x1080 format = XR24 little-endian (0x34325258) [ 151.891515] [drm:intel_dump_pipe_config] scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080 [ 151.891516] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = -1 [ 151.891517] [drm:intel_dump_pipe_config] [PLANE:37:plane 2C] disabled, scaler_id = -1 [ 151.891519] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000 [ 151.891522] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 151.891524] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 151.891526] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 151.891528] [drm:bxt_get_dpll] [CRTC:26:pipe A] using pre-allocated PORT PLL A [ 151.891529] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A [ 151.891531] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 151.891532] [drm:bxt_get_dpll] [CRTC:31:pipe B] using pre-allocated PORT PLL B [ 151.891533] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B [ 151.891535] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31:pipe B] scaler_user index 1.31 [ 151.891536] [drm:bxt_get_dpll] [CRTC:36:pipe C] using pre-allocated PORT PLL C [ 151.891537] [drm:intel_reference_shared_dpll] using PORT PLL C for pipe C [ 151.891539] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36:pipe C] scaler_user index 2.31 [ 151.891553] [drm:intel_power_well_enable] enabling power well 2 [ 151.891555] [drm:skl_set_power_well] Enabling power well 2 [ 151.891558] [drm:intel_power_well_enable] enabling dpio-common-bc [ 151.891615] [drm:bxt_set_cdclk] Changing CDCLK to 288000 kHz (VCO 1152000 kHz) [ 151.895638] [drm:intel_update_cdclk] Current CD clock rate: 288000 kHz, VCO: 1152000 kHz, ref: 19200 kHz [ 151.895640] [drm:verify_encoder_state] [ENCODER:38:DDI A] [ 151.895642] [drm:verify_encoder_state] [ENCODER:46:DDI B] [ 151.895643] [drm:verify_encoder_state] [ENCODER:48:DP-MST A] [ 151.895644] [drm:verify_encoder_state] [ENCODER:49:DP-MST B] [ 151.895645] [drm:verify_encoder_state] [ENCODER:50:DP-MST C] [ 151.895646] [drm:verify_encoder_state] [ENCODER:53:DDI C] [ 151.895647] [drm:verify_encoder_state] [ENCODER:55:DP-MST A] [ 151.895649] [drm:verify_encoder_state] [ENCODER:56:DP-MST B] [ 151.895650] [drm:verify_encoder_state] [ENCODER:57:DP-MST C] [ 151.895652] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1] [ 151.895655] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2] [ 151.895657] [drm:verify_single_dpll_state] PORT PLL A [ 151.895658] [drm:verify_single_dpll_state] PORT PLL B [ 151.895659] [drm:verify_single_dpll_state] PORT PLL C [ 151.895667] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26 [ 151.895668] [drm:intel_enable_shared_dpll] enabling PORT PLL A [ 151.895711] [drm:edp_panel_on] Turn eDP port A panel power on [ 151.895713] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 151.895718] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000068 [ 151.895719] [drm:wait_panel_status] Wait complete [ 151.895720] [drm:wait_panel_on] Wait for panel power on [ 151.895722] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 0000006b [ 151.948107] [drm:wait_panel_status] Wait complete [ 151.948837] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 151.948838] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 151.949069] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 151.949596] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 151.949638] [drm:skylake_pfit_enable] for crtc_state = ffff88046b419000 [ 151.949694] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 151.949698] [drm:intel_enable_pipe] enabling pipe A [ 151.949705] [drm:intel_edp_backlight_on] [ 151.949706] [drm:intel_panel_enable_backlight] pipe A [ 151.949708] [drm:intel_panel_actually_set_backlight] set backlight PWM = 28800 [ 151.950185] [drm:intel_psr_enable] PSR not supported on this platform [ 151.950187] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 151.950219] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31 [ 151.950220] [drm:intel_enable_shared_dpll] enabling PORT PLL B [ 151.950985] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 151.950986] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 151.951862] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 151.955146] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 151.955190] [drm:skylake_pfit_enable] for crtc_state = ffff88046b418800 [ 151.955251] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 151.955253] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 151.955256] [drm:intel_enable_pipe] enabling pipe B [ 151.955274] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:DDI B] [ 151.955276] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 28 bytes ELD [ 151.955308] [drm:intel_enable_shared_dpll] enable PORT PLL C (active 4, on? 0) for crtc 36 [ 151.955309] [drm:intel_enable_shared_dpll] enabling PORT PLL C [ 151.956523] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 151.956525] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 151.956950] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 151.960505] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 151.960624] [drm:skylake_pfit_enable] for crtc_state = ffff88046b419800 [ 151.960683] [drm:skl_wm_flush_pipe] flush pipe A (pass 3) [ 151.960685] [drm:skl_wm_flush_pipe] flush pipe B (pass 3) [ 151.960687] [drm:skl_wm_flush_pipe] flush pipe C (pass 3) [ 151.960691] [drm:intel_enable_pipe] enabling pipe C [ 151.964838] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1] [ 151.964843] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 151.964859] [drm:verify_single_dpll_state] PORT PLL A [ 151.964868] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1] [ 151.964870] [drm:verify_crtc_state] [CRTC:31:pipe B] [ 151.964882] [drm:verify_single_dpll_state] PORT PLL B [ 151.964890] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2] [ 151.964892] [drm:verify_crtc_state] [CRTC:36:pipe C] [ 151.964902] [drm:verify_single_dpll_state] PORT PLL C [ 151.964929] [drm:drm_fb_helper_hotplug_event] [ 151.964930] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] [ 151.964932] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1] [ 151.965013] [drm:intel_dp_probe_oui] Sink OUI: 001cf8 [ 151.965091] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 151.965183] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 151.965186] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes : [ 151.965188] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [ 151.965189] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] [ 151.965191] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 151.965299] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.965377] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 151.965379] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 151.965380] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 151.965382] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 151.965565] [drm:intel_dp_probe_mst] Sink is not MST capable [ 151.965694] [drm:drm_edid_to_eld] ELD monitor VX279 [ 151.965696] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 [ 151.965697] [drm:drm_edid_to_eld] ELD size 28, SAD count 1 [ 151.965714] [drm:drm_mode_debug_printmodeline] Modeline 117:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 151.965715] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 151.965718] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes : [ 151.965720] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 151.965721] [drm:drm_mode_debug_printmodeline] Modeline 97:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 151.965723] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 151.965725] [drm:drm_mode_debug_printmodeline] Modeline 99:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 [ 151.965727] [drm:drm_mode_debug_printmodeline] Modeline 94:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [ 151.965729] [drm:drm_mode_debug_printmodeline] Modeline 91:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 [ 151.965731] [drm:drm_mode_debug_printmodeline] Modeline 70:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 [ 151.965733] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 151.965734] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 151.965736] [drm:drm_mode_debug_printmodeline] Modeline 72:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 [ 151.965738] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 151.965740] [drm:drm_mode_debug_printmodeline] Modeline 67:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 151.965742] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 151.965744] [drm:drm_mode_debug_printmodeline] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 151.965745] [drm:drm_mode_debug_printmodeline] Modeline 96:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [ 151.965747] [drm:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 151.965749] [drm:drm_mode_debug_printmodeline] Modeline 82:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 151.965751] [drm:drm_mode_debug_printmodeline] Modeline 83:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 151.965753] [drm:drm_mode_debug_printmodeline] Modeline 84:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 151.965755] [drm:drm_mode_debug_printmodeline] Modeline 85:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 151.965756] [drm:drm_mode_debug_printmodeline] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 151.965758] [drm:drm_mode_debug_printmodeline] Modeline 75:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 151.965760] [drm:drm_mode_debug_printmodeline] Modeline 92:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa [ 151.965762] [drm:drm_mode_debug_printmodeline] Modeline 101:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa [ 151.965764] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [ 151.965765] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 151.965767] [drm:drm_mode_debug_printmodeline] Modeline 77:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa [ 151.965769] [drm:drm_mode_debug_printmodeline] Modeline 102:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 151.965771] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 151.965773] [drm:drm_mode_debug_printmodeline] Modeline 79:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 151.965774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] [ 151.965775] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 151.965817] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.965818] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.965856] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.965858] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 151.965897] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 151.965898] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.965937] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 151.965939] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected [ 151.965940] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] [ 151.965942] [drm:intel_dp_detect] [CONNECTOR:54:DP-2] [ 151.966163] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 151.966358] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no [ 151.966360] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 151.966361] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 151.966362] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 151.966558] [drm:intel_dp_probe_oui] Sink OUI: 4ce000 [ 151.966755] [drm:intel_dp_probe_oui] Branch OUI: 000000 [ 151.966965] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 151.966969] [drm:drm_mode_debug_printmodeline] Modeline 104:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 151.966970] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y [ 151.966972] [drm:drm_mode_debug_printmodeline] Modeline 109:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 151.966973] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y [ 151.966974] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes : [ 151.966976] [drm:drm_mode_debug_printmodeline] Modeline 90:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa [ 151.966978] [drm:drm_mode_debug_printmodeline] Modeline 89:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 151.966980] [drm:drm_mode_debug_printmodeline] Modeline 87:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 151.966982] [drm:drm_mode_debug_printmodeline] Modeline 86:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 151.966984] [drm:drm_mode_debug_printmodeline] Modeline 103:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 151.966985] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 151.966987] [drm:drm_mode_debug_printmodeline] Modeline 95:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 151.966989] [drm:drm_mode_debug_printmodeline] Modeline 98:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 151.966990] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] [ 151.966991] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2] [ 151.967033] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 151.967034] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 151.967091] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 151.967093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 151.967131] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 151.967133] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 151.967171] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 151.967173] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected [ 151.967177] [drm:drm_setup_crtcs] [ 151.967178] [drm:drm_enable_connectors] connector 39 enabled? yes [ 151.967179] [drm:drm_enable_connectors] connector 47 enabled? yes [ 151.967180] [drm:drm_enable_connectors] connector 51 enabled? no [ 151.967181] [drm:drm_enable_connectors] connector 54 enabled? yes [ 151.967183] [drm:drm_enable_connectors] connector 58 enabled? no [ 151.967185] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1 [ 151.967186] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0 [ 151.967188] [drm:intel_fb_initial_config] connector eDP-1 on [CRTC:26:pipe A]: 1920x1080 [ 151.967189] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 151.967190] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 151.967191] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:31:pipe B]: 1920x1080 [ 151.967192] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 151.967194] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2 [ 151.967195] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0 [ 151.967196] [drm:intel_fb_initial_config] using first mode listed on connector DP-2 [ 151.967197] [drm:intel_fb_initial_config] connector DP-2 on [CRTC:36:pipe C]: 1920x1080 [ 151.967198] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 151.967200] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0) [ 151.967201] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 31 (0,0) [ 151.967202] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0) [ 151.967218] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 151.967220] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 151.967221] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 151.970295] [drm:i915_hotplug_work_func] running encoder hotplug functions [ 151.970297] [drm:i915_hotplug_work_func] Connector DP-1 (pin 5) received hotplug event. [ 151.970298] [drm:intel_dp_detect] [CONNECTOR:47:DP-1] [ 151.970872] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00 [ 151.970952] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes [ 151.970954] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 [ 151.970955] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000 [ 151.970957] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000 [ 151.971139] [drm:intel_dp_probe_mst] Sink is not MST capable [ 151.971228] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. [ 151.971230] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1] [ 151.971269] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.971271] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.971309] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 151.971311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 151.971351] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 151.971352] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 151.971395] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 152.919914] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 152.919917] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 436.494434] prime_busy: executing [ 436.494491] [drm:i915_gem_open] [ 436.494576] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.494579] [drm:i915_pages_create_for_stolen] offset=0x7f9000, size=16384 [ 436.494655] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.494657] [drm:i915_pages_create_for_stolen] offset=0x7fd000, size=16384 [ 436.494673] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.494675] [drm:i915_pages_create_for_stolen] offset=0x801000, size=16384 [ 436.494689] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.494691] [drm:i915_pages_create_for_stolen] offset=0x805000, size=16384 [ 436.494958] [drm:i915_gem_open] [ 436.495029] prime_busy: starting subtest before-render [ 436.496262] prime_busy: exiting, ret=99 [ 436.496309] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.496312] [drm:i915_pages_create_for_stolen] offset=0x809000, size=16384 [ 436.496359] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.496361] [drm:i915_pages_create_for_stolen] offset=0x80d000, size=16384 [ 436.496380] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.496382] [drm:i915_pages_create_for_stolen] offset=0x811000, size=16384 [ 436.496394] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 436.496395] [drm:i915_pages_create_for_stolen] offset=0x815000, size=16384 [ 452.366257] [drm] no progress on render ring [ 452.367497] [drm] GPU HANG: ecode 9:-1:0x00000000, reason: Engine(s) hung, action: reset [ 452.367521] [drm:i915_reset_and_wakeup] resetting chip [ 452.367536] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 452.367537] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 452.367538] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 452.404874] drm/i915: Resetting chip after gpu hang [ 452.404881] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 452.404903] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 452.404920] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 452.404939] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 452.404954] [drm:intel_guc_setup] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load SUCCESS [ 452.404956] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load PENDING [ 452.407628] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x8002f0ec [ 452.407631] [drm:guc_ucode_xfer_dma] returning 0 [ 452.407633] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load SUCCESS [ 452.407649] [drm:select_doorbell_register] assigned normal priority doorbell id 0x0 [ 452.407650] [drm:select_doorbell_cacheline] selected doorbell cacheline 0x80, next 0xc0, linesize 64 [ 452.407658] [drm:guc_client_alloc] new priority 2 client ffff8804665b9780: ctx_index 0 [ 452.407659] [drm:guc_client_alloc] doorbell id 0, cacheline offset 0x80 [ 452.907803] [drm] RC6 on [ 464.501118] prime_busy: executing [ 464.501171] [drm:i915_gem_open] [ 464.501242] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.501244] [drm:i915_pages_create_for_stolen] offset=0x7f9000, size=16384 [ 464.501334] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.501336] [drm:i915_pages_create_for_stolen] offset=0x7fd000, size=16384 [ 464.501352] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.501354] [drm:i915_pages_create_for_stolen] offset=0x801000, size=16384 [ 464.501367] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.501369] [drm:i915_pages_create_for_stolen] offset=0x805000, size=16384 [ 464.501644] [drm:i915_gem_open] [ 464.501716] prime_busy: starting subtest before-vebox [ 464.503032] prime_busy: exiting, ret=99 [ 464.503077] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.503080] [drm:i915_pages_create_for_stolen] offset=0x809000, size=16384 [ 464.503132] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.503134] [drm:i915_pages_create_for_stolen] offset=0x80d000, size=16384 [ 464.503150] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.503152] [drm:i915_pages_create_for_stolen] offset=0x811000, size=16384 [ 464.503167] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 464.503169] [drm:i915_pages_create_for_stolen] offset=0x815000, size=16384 [ 480.499053] [drm] no progress on video enhancement ring [ 480.500252] [drm] GPU HANG: ecode 9:-1:0x00000000, reason: Engine(s) hung, action: reset [ 480.500265] [drm:i915_reset_and_wakeup] resetting chip [ 480.500287] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 480.500288] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29:plane 1B] scaler_user index 1.4 [ 480.500289] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34:plane 1C] scaler_user index 2.8 [ 480.501053] drm/i915: Resetting chip after gpu hang [ 480.501067] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 480.501085] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 480.501100] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 480.501115] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 480.501129] [drm:intel_guc_setup] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load SUCCESS [ 480.501131] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load PENDING [ 480.504950] [drm:guc_ucode_xfer_dma] DMA status 0x10, GuC status 0x8002f0ec [ 480.504951] [drm:guc_ucode_xfer_dma] returning 0 [ 480.504951] [drm:intel_guc_setup] GuC fw status: fetch SUCCESS, load SUCCESS [ 480.504960] [drm:select_doorbell_register] assigned normal priority doorbell id 0x0 [ 480.504961] [drm:select_doorbell_cacheline] selected doorbell cacheline 0xc0, next 0x100, linesize 64 [ 480.504967] [drm:guc_client_alloc] new priority 2 client ffff88046c269180: ctx_index 0 [ 480.504967] [drm:guc_client_alloc] doorbell id 0, cacheline offset 0xc0 [ 481.015119] [drm] RC6 on