[ 0.000000] Linux version 4.5.3 (root@Punisher) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.1) ) #1 SMP Mon May 9 11:56:25 CEST 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.3 root=UUID=18233d23-c61a-4c1d-8e6c-587b79f20e8e ro splash=verbose kmemleak=off [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] tseg: 00bff00000 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfdcffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfdd0000-0x00000000bfdd2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfdd3000-0x00000000bfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-970A-DS3/GA-970A-DS3, BIOS F6 10/23/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000240000000 aka 9216M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC [ 0.000000] total RAM covered: 3070M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3070MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbfdd0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4b30-0x000f4b3f] mapped at [ffff8800000f4b30] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x0209b000, 0x0209bfff] PGTABLE [ 0.000000] BRK [0x0209c000, 0x0209cfff] PGTABLE [ 0.000000] BRK [0x0209d000, 0x0209dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3471e000-0x36386fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6620 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000BFDD3000 000048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000BFDD3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000BFDD3100 0075FA (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000BFDD0000 000040 [ 0.000000] ACPI: SSDT 0x00000000BFDDA7C0 000EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MSDM 0x00000000BFDDB6C0 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: HPET 0x00000000BFDDB740 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000BFDDB780 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 0x00000000BFDDB7C0 0001A2 (v01 GBT GBT B0 5455312E BG?? 00000101) [ 0.000000] ACPI: APIC 0x00000000BFDDA700 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 0x00000000BFDDB980 005EDF (v01 MATS RCM 80000001 INTL 20061109) [ 0.000000] ACPI: IVRS 0x00000000BFDE18D0 0000D8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23fffa000-0x23fffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfdcffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff] [ 0.000000] On node 0 totalpages: 2096494 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12216 pages used for memmap [ 0.000000] DMA32 zone: 781776 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfdd0000-0xbfdd2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfdd3000-0xbfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xbff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88023fc00000 s97624 r8192 d29352 u262144 [ 0.000000] pcpu-alloc: s97624 r8192 d29352 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063713 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.3 root=UUID=18233d23-c61a-4c1d-8e6c-587b79f20e8e ro splash=verbose kmemleak=off [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xf908000000-0xf909ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 8075784K/8385976K available (8078K kernel code, 1274K rwdata, 3908K rodata, 2116K init, 1284K bss, 310192K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3221.575 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6443.15 BogoMIPS (lpj=12886300) [ 0.000028] pid_max: default: 32768 minimum: 301 [ 0.000036] ACPI: Core revision 20160108 [ 0.002597] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.002601] [ 0.002623] Security Framework initialized [ 0.002627] Yama: becoming mindful. [ 0.002636] AppArmor: AppArmor initialized [ 0.003028] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005353] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006448] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006460] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006755] CPU: Physical Processor ID: 0 [ 0.006759] CPU: Processor Core ID: 0 [ 0.006762] mce: CPU supports 6 MCE banks [ 0.006769] LVT offset 0 assigned for vector 0xf9 [ 0.006774] process: using AMD E400 aware idle routine [ 0.006778] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.006780] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.006978] Freeing SMP alternatives memory: 28K (ffffffff81f51000 - ffffffff81f58000) [ 0.029171] ftrace: allocating 31092 entries in 122 pages [ 0.504323] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.651885] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (family: 0x10, model: 0xa, stepping: 0x0) [ 0.651908] Performance Events: AMD PMU driver. [ 0.651913] ... version: 0 [ 0.651915] ... bit width: 48 [ 0.651918] ... generic registers: 4 [ 0.651920] ... value mask: 0000ffffffffffff [ 0.651922] ... max period: 00007fffffffffff [ 0.651924] ... fixed-purpose events: 0 [ 0.651926] ... event mask: 000000000000000f [ 0.652396] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.652460] x86: Booting SMP configuration: [ 0.652463] .... node #0, CPUs: #1 [ 0.655181] process: System has AMD C1E enabled [ 0.655208] #2 [ 0.655208] process: Switch to broadcast mode on CPU1 [ 0.657799] process: Switch to broadcast mode on CPU2 [ 0.657802] #3 #4 [ 0.660440] process: Switch to broadcast mode on CPU3 [ 0.663036] #5 [ 0.663040] process: Switch to broadcast mode on CPU4 [ 0.665620] x86: Booted up 1 node, 6 CPUs [ 0.665625] smpboot: Total of 6 processors activated (38658.90 BogoMIPS) [ 0.665701] process: Switch to broadcast mode on CPU5 [ 0.672348] process: Switch to broadcast mode on CPU0 [ 0.672477] devtmpfs: initialized [ 0.675954] evm: security.selinux [ 0.675957] evm: security.SMACK64 [ 0.675959] evm: security.SMACK64EXEC [ 0.675961] evm: security.SMACK64TRANSMUTE [ 0.675963] evm: security.SMACK64MMAP [ 0.675965] evm: security.ima [ 0.675967] evm: security.capability [ 0.676080] PM: Registering ACPI NVS region [mem 0xbfdd0000-0xbfdd2fff] (12288 bytes) [ 0.676193] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.676259] pinctrl core: initialized pinctrl subsystem [ 0.676351] RTC time: 9:37:03, date: 07/21/16 [ 0.677192] NET: Registered protocol family 16 [ 0.687288] cpuidle: using governor ladder [ 0.699287] cpuidle: using governor menu [ 0.699297] PCCT header not found. [ 0.699304] node 0 link 0: io port [a000, ffff] [ 0.699306] TOM: 00000000c0000000 aka 3072M [ 0.699309] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.699310] node 0 link 0: mmio [a0000, bffff] [ 0.699312] node 0 link 0: mmio [c0000000, dfffffff] [ 0.699314] node 0 link 0: mmio [f0000000, ffffffff] [ 0.699315] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff] [ 0.699317] TOM2: 0000000240000000 aka 9216M [ 0.699320] bus: [bus 00-05] on node 0 link 0 [ 0.699321] bus: 00 [io 0x0000-0xffff] [ 0.699322] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.699323] bus: 00 [mem 0xc0000000-0xdfffffff] [ 0.699324] bus: 00 [mem 0xe0600000-0xffffffff] [ 0.699325] bus: 00 [mem 0xe0100000-0xe05fffff] [ 0.699325] bus: 00 [mem 0x240000000-0xfcffffffff] [ 0.699389] ACPI: bus type PCI registered [ 0.699394] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.699463] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.699469] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.699482] PCI: Using configuration type 1 for base access [ 0.711421] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.711426] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.711754] ACPI: Added _OSI(Module Device) [ 0.711757] ACPI: Added _OSI(Processor Device) [ 0.711760] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.711763] ACPI: Added _OSI(Processor Aggregator Device) [ 0.712716] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.712724] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.712746] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.712753] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.716183] ACPI: Interpreter enabled [ 0.716205] ACPI: (supports S0 S3 S4 S5) [ 0.716209] ACPI: Using IOAPIC for interrupt routing [ 0.716242] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.719139] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.719147] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.719154] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.719406] PCI host bridge to bus 0000:00 [ 0.719412] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.719415] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.719419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.719423] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.719428] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.719433] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.719443] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.719453] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.719539] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 0.719626] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.719653] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.719690] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.719720] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.719745] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.719779] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.719810] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.719835] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.719869] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.719907] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.719919] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.719925] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.719932] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.719938] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.719945] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.719951] pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff] [ 0.719967] pci 0000:00:11.0: set SATA to AHCI mode [ 0.720040] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.720050] pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff] [ 0.720119] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.720151] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.720163] pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff] [ 0.720218] pci 0000:00:12.2: supports D1 D2 [ 0.720219] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.720252] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.720285] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.720294] pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff] [ 0.720363] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.720395] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.720407] pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff] [ 0.720462] pci 0000:00:13.2: supports D1 D2 [ 0.720463] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.720496] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.720528] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.720624] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.720633] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.720640] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.720647] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.720653] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.720660] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.720674] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.720677] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.720680] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.720682] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.720742] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.720756] pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit] [ 0.720802] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.720834] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.720862] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.720961] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.721015] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.721044] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.721054] pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff] [ 0.721123] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.721156] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.721203] pci 0000:00:15.0: supports D1 D2 [ 0.721238] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.721267] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.721276] pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff] [ 0.721346] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.721378] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.721389] pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff] [ 0.721444] pci 0000:00:16.2: supports D1 D2 [ 0.721445] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.721481] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.721511] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.721565] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.721617] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.721670] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.721725] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.721814] pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000 [ 0.721824] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.721833] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.721843] pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref] [ 0.721849] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f] [ 0.721855] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.721938] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300 [ 0.721948] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff] [ 0.727309] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.727316] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.727318] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.727321] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.727369] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.727385] pci 0000:02:00.0: reg 0x10: [mem 0xfd7f8000-0xfd7fffff 64bit] [ 0.727456] pci 0000:02:00.0: supports D1 D2 [ 0.727457] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.735301] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.735308] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.735310] pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.735313] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.735364] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.735378] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff] [ 0.735396] pci 0000:03:00.0: reg 0x18: [mem 0xfd8ff000-0xfd8fffff 64bit pref] [ 0.735408] pci 0000:03:00.0: reg 0x20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref] [ 0.735471] pci 0000:03:00.0: supports D1 D2 [ 0.735473] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.743297] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.743304] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.743306] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.743309] pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.743361] pci 0000:04:06.0: [10ec:8139] type 00 class 0x020000 [ 0.743378] pci 0000:04:06.0: reg 0x10: [io 0xbe00-0xbeff] [ 0.743387] pci 0000:04:06.0: reg 0x14: [mem 0xfddff000-0xfddff0ff] [ 0.743429] pci 0000:04:06.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.743462] pci 0000:04:06.0: supports D1 D2 [ 0.743463] pci 0000:04:06.0: PME# supported from D1 D2 D3hot D3cold [ 0.743528] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.743533] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.743536] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.743539] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.743540] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.743542] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.743544] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.743545] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.743546] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.743582] pci 0000:00:15.0: PCI bridge to [bus 05] [ 0.743588] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 0.743590] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.743594] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.743780] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 0.743816] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 0.743849] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 0.743881] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 0.743912] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 0.743944] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 0.743976] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 0.744008] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 0.744399] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.744402] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.744407] vgaarb: loaded [ 0.744409] vgaarb: bridge control possible 0000:01:00.0 [ 0.744587] SCSI subsystem initialized [ 0.744724] libata version 3.00 loaded. [ 0.744744] ACPI: bus type USB registered [ 0.744761] usbcore: registered new interface driver usbfs [ 0.744771] usbcore: registered new interface driver hub [ 0.744797] usbcore: registered new device driver usb [ 0.744934] PCI: Using ACPI for IRQ routing [ 0.750893] PCI: pci_cache_line_size set to 64 bytes [ 0.750939] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.750940] e820: reserve RAM buffer [mem 0xbfdd0000-0xbfffffff] [ 0.751032] NetLabel: Initializing [ 0.751034] NetLabel: domain hash size = 128 [ 0.751037] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.751047] NetLabel: unlabeled traffic allowed by default [ 0.751082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.751086] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.754195] clocksource: Switched to clocksource hpet [ 0.759738] VFS: Disk quotas dquot_6.6.0 [ 0.759759] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.759844] AppArmor: AppArmor Filesystem Enabled [ 0.759895] pnp: PnP ACPI init [ 0.759995] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.759999] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.760002] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.760007] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.760195] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 0.760203] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:06.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.760224] system 00:01: [io 0x0900-0x091f] has been reserved [ 0.760228] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.760231] system 00:01: [io 0x040b] has been reserved [ 0.760233] system 00:01: [io 0x04d6] has been reserved [ 0.760236] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.760239] system 00:01: [io 0x0c14] has been reserved [ 0.760242] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.760245] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.760248] system 00:01: [io 0x0c6f] has been reserved [ 0.760251] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.760254] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.760257] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.760260] system 00:01: [io 0x0800-0x08fe] could not be reserved [ 0.760263] system 00:01: [io 0x0a10-0x0a17] has been reserved [ 0.760266] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.760269] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.760272] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.760275] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.760280] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.760388] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.760519] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved [ 0.760523] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.760640] system 00:04: [mem 0x000ce400-0x000cffff] has been reserved [ 0.760644] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.760647] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.760650] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.760653] system 00:04: [mem 0xbfdd0000-0xbfddffff] could not be reserved [ 0.760656] system 00:04: [mem 0xffff0000-0xffffffff] has been reserved [ 0.760659] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.760662] system 00:04: [mem 0x00100000-0xbfdcffff] could not be reserved [ 0.760666] system 00:04: [mem 0xbfe00000-0xbfefffff] has been reserved [ 0.760669] system 00:04: [mem 0xbff00000-0xbfffffff] could not be reserved [ 0.760672] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.760675] system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.760678] system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.760681] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.760695] pnp: PnP ACPI: found 5 devices [ 0.767175] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.767206] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref] [ 0.767211] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.767214] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.767218] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff] [ 0.767222] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.767227] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.767230] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.767234] pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.767238] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.767243] pci 0000:00:09.0: PCI bridge to [bus 03] [ 0.767246] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.767250] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.767253] pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.767259] pci 0000:04:06.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref] [ 0.767263] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.767267] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.767272] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.767276] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.767283] pci 0000:00:15.0: PCI bridge to [bus 05] [ 0.767287] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 0.767291] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.767295] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.767303] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.767304] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.767305] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.767307] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.767308] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.767309] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.767311] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] [ 0.767312] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.767313] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.767314] pci_bus 0000:02: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.767316] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref] [ 0.767317] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.767318] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.767320] pci_bus 0000:03: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.767321] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.767322] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.767323] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref] [ 0.767325] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.767326] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.767327] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.767329] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.767330] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.767331] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.767332] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.767334] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.767359] NET: Registered protocol family 2 [ 0.767538] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.767740] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.768029] TCP: Hash tables configured (established 65536 bind 65536) [ 0.768081] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.768130] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.768218] NET: Registered protocol family 1 [ 1.058601] pci 0000:01:00.0: Video device with shadowed ROM [ 1.058724] PCI: CLS 64 bytes, default 64 [ 1.058778] Trying to unpack rootfs image as initramfs... [ 1.424910] Freeing initrd memory: 29092K (ffff88003471e000 - ffff880036387000) [ 1.425246] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.425250] pci 0000:00:00.2: PCI INT A: no GSI [ 1.501307] iommu: Adding device 0000:00:00.0 to group 0 [ 1.501693] iommu: Adding device 0000:00:02.0 to group 1 [ 1.502077] iommu: Adding device 0000:00:04.0 to group 2 [ 1.502465] iommu: Adding device 0000:00:09.0 to group 3 [ 1.502847] iommu: Adding device 0000:00:11.0 to group 4 [ 1.503233] iommu: Adding device 0000:00:12.0 to group 5 [ 1.503246] iommu: Adding device 0000:00:12.2 to group 5 [ 1.503633] iommu: Adding device 0000:00:13.0 to group 6 [ 1.503647] iommu: Adding device 0000:00:13.2 to group 6 [ 1.504028] iommu: Adding device 0000:00:14.0 to group 7 [ 1.504411] iommu: Adding device 0000:00:14.1 to group 8 [ 1.504793] iommu: Adding device 0000:00:14.2 to group 9 [ 1.505175] iommu: Adding device 0000:00:14.3 to group 10 [ 1.505558] iommu: Adding device 0000:00:14.4 to group 11 [ 1.505942] iommu: Adding device 0000:00:14.5 to group 12 [ 1.506333] iommu: Adding device 0000:00:15.0 to group 13 [ 1.506725] iommu: Adding device 0000:00:16.0 to group 14 [ 1.506739] iommu: Adding device 0000:00:16.2 to group 14 [ 1.507134] iommu: Adding device 0000:01:00.0 to group 15 [ 1.507153] iommu: Adding device 0000:01:00.1 to group 15 [ 1.507539] iommu: Adding device 0000:02:00.0 to group 16 [ 1.507925] iommu: Adding device 0000:03:00.0 to group 17 [ 1.507935] iommu: Adding device 0000:04:06.0 to group 11 [ 1.507938] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.507941] AMD-Vi: Interrupt remapping enabled [ 1.508100] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.509494] LVT offset 1 assigned for vector 0x400 [ 1.509499] IBS: LVT offset 1 assigned [ 1.509583] perf: AMD IBS detected (0x0000001f) [ 1.509622] Scanning for low memory corruption every 60 seconds [ 1.509948] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.510004] audit: initializing netlink subsys (disabled) [ 1.510027] audit: type=2000 audit(1469093823.924:1): initialized [ 1.510269] Initialise system trusted keyring [ 1.511837] zbud: loaded [ 1.512335] fuse init (API version 7.24) [ 1.512463] Key type big_key registered [ 1.513416] Key type asymmetric registered [ 1.513424] Asymmetric key parser 'x509' registered [ 1.513467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.513549] io scheduler noop registered [ 1.513553] io scheduler deadline registered (default) [ 1.513582] io scheduler cfq registered [ 1.514019] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.514029] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.514056] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.514062] vesafb: scrolling: redraw [ 1.514067] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.514084] vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90001000000, using 3072k, total 3072k [ 1.522263] Console: switching to colour frame buffer device 128x48 [ 1.530351] fb0: VESA VGA frame buffer device [ 1.530488] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.530622] ACPI: Power Button [PWRB] [ 1.530709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.530821] ACPI: Power Button [PWRF] [ 1.530898] ACPI: processor limited to max C-state 1 [ 1.531269] GHES: HEST is not enabled! [ 1.531419] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.532870] Linux agpgart interface v0.103 [ 1.535694] brd: module loaded [ 1.537153] loop: module loaded [ 1.537400] libphy: Fixed MDIO Bus: probed [ 1.537464] tun: Universal TUN/TAP device driver, 1.6 [ 1.537546] tun: (C) 1999-2004 Max Krasnyansky [ 1.537704] PPP generic driver version 2.4.2 [ 1.537814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.537916] ehci-pci: EHCI PCI platform driver [ 1.538089] QUIRK: Enable AMD PLL fix [ 1.538106] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.538189] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.538333] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.538471] ehci-pci 0000:00:12.2: debug port 1 [ 1.538578] ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000 [ 1.550294] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.553428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.556586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.559739] usb usb1: Product: EHCI Host Controller [ 1.562852] usb usb1: Manufacturer: Linux 4.5.3 ehci_hcd [ 1.565926] usb usb1: SerialNumber: 0000:00:12.2 [ 1.569111] hub 1-0:1.0: USB hub found [ 1.572157] hub 1-0:1.0: 5 ports detected [ 1.575372] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.578424] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.581514] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.584683] ehci-pci 0000:00:13.2: debug port 1 [ 1.587830] ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000 [ 1.602279] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.605355] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.608451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.611570] usb usb2: Product: EHCI Host Controller [ 1.614693] usb usb2: Manufacturer: Linux 4.5.3 ehci_hcd [ 1.617807] usb usb2: SerialNumber: 0000:00:13.2 [ 1.620992] hub 2-0:1.0: USB hub found [ 1.624041] hub 2-0:1.0: 5 ports detected [ 1.627247] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.630300] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.633363] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.636435] ehci-pci 0000:00:16.2: debug port 1 [ 1.639458] ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000 [ 1.654279] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.657221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.660118] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.662989] usb usb3: Product: EHCI Host Controller [ 1.665806] usb usb3: Manufacturer: Linux 4.5.3 ehci_hcd [ 1.668638] usb usb3: SerialNumber: 0000:00:16.2 [ 1.671555] hub 3-0:1.0: USB hub found [ 1.674357] hub 3-0:1.0: 4 ports detected [ 1.677212] ehci-platform: EHCI generic platform driver [ 1.680002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.682831] ohci-pci: OHCI PCI platform driver [ 1.685745] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.688597] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.691487] ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000 [ 1.754298] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.757145] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.759992] usb usb4: Product: OHCI PCI host controller [ 1.762836] usb usb4: Manufacturer: Linux 4.5.3 ohci_hcd [ 1.765674] usb usb4: SerialNumber: 0000:00:12.0 [ 1.768574] hub 4-0:1.0: USB hub found [ 1.771335] hub 4-0:1.0: 5 ports detected [ 1.774273] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.777080] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.779917] ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000 [ 1.842299] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.845101] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.847920] usb usb5: Product: OHCI PCI host controller [ 1.850740] usb usb5: Manufacturer: Linux 4.5.3 ohci_hcd [ 1.853557] usb usb5: SerialNumber: 0000:00:13.0 [ 1.856492] hub 5-0:1.0: USB hub found [ 1.859305] hub 5-0:1.0: 5 ports detected [ 1.862266] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.865059] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.867877] ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000 [ 1.930298] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.933153] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.935991] usb usb6: Product: OHCI PCI host controller [ 1.938818] usb usb6: Manufacturer: Linux 4.5.3 ohci_hcd [ 1.941613] usb usb6: SerialNumber: 0000:00:14.5 [ 1.944503] hub 6-0:1.0: USB hub found [ 1.947283] hub 6-0:1.0: 2 ports detected [ 1.950184] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.953018] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.955882] ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000 [ 2.018300] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.021140] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.023970] usb usb7: Product: OHCI PCI host controller [ 2.026809] usb usb7: Manufacturer: Linux 4.5.3 ohci_hcd [ 2.029657] usb usb7: SerialNumber: 0000:00:16.0 [ 2.032566] hub 7-0:1.0: USB hub found [ 2.035353] hub 7-0:1.0: 4 ports detected [ 2.038169] ohci-platform: OHCI generic platform driver [ 2.040947] uhci_hcd: USB Universal Host Controller Interface driver [ 2.043816] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.046643] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 2.049601] xhci_hcd 0000:02:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490 [ 2.052585] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.055516] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.058440] usb usb8: Product: xHCI Host Controller [ 2.061348] usb usb8: Manufacturer: Linux 4.5.3 xhci-hcd [ 2.064256] usb usb8: SerialNumber: 0000:02:00.0 [ 2.067240] hub 8-0:1.0: USB hub found [ 2.070076] hub 8-0:1.0: 2 ports detected [ 2.072946] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.075762] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2.078616] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.081531] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.084466] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.087435] usb usb9: Product: xHCI Host Controller [ 2.090380] usb usb9: Manufacturer: Linux 4.5.3 xhci-hcd [ 2.093319] usb usb9: SerialNumber: 0000:02:00.0 [ 2.096331] hub 9-0:1.0: USB hub found [ 2.099203] hub 9-0:1.0: 2 ports detected [ 2.102123] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.106269] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 2.137799] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.140786] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 2.262262] usb 3-2: new high-speed USB device number 3 using ehci-pci [ 2.279369] usb 4-2: New USB device found, idVendor=248a, idProduct=8366 [ 2.282440] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.285503] usb 4-2: Product: Wireless Receiver [ 2.288547] usb 4-2: Manufacturer: Telink [ 2.374296] usb 7-1: new full-speed USB device number 2 using ohci-pci [ 2.394394] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.394868] usb 3-2: New USB device found, idVendor=1a40, idProduct=0101 [ 2.394870] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.394870] usb 3-2: Product: USB 2.0 Hub [ 2.395179] hub 3-2:1.0: USB hub found [ 2.395242] hub 3-2:1.0: 4 ports detected [ 2.412835] mousedev: PS/2 mouse device common for all mice [ 2.416019] rtc_cmos 00:02: RTC can wake from S4 [ 2.419171] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.422215] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.425275] i2c /dev entries driver [ 2.428307] device-mapper: uevent: version 1.0.3 [ 2.431405] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.434535] ledtrig-cpu: registered to indicate activity on CPUs [ 2.438099] NET: Registered protocol family 10 [ 2.441485] NET: Registered protocol family 17 [ 2.444613] Key type dns_resolver registered [ 2.447964] microcode: CPU0: patch_level=0x010000bf [ 2.451093] microcode: CPU1: patch_level=0x010000bf [ 2.454125] microcode: CPU2: patch_level=0x010000bf [ 2.457130] microcode: CPU3: patch_level=0x010000bf [ 2.460032] microcode: CPU4: patch_level=0x010000bf [ 2.462906] microcode: CPU5: patch_level=0x010000bf [ 2.465711] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.468743] registered taskstats version 1 [ 2.471627] Loading compiled-in X.509 certificates [ 2.475238] Loaded X.509 cert 'Build time autogenerated kernel key: 1c0cb1068d392117672095b3ae73922483e0b434' [ 2.478281] zswap: loaded using pool lzo/zbud [ 2.482967] Key type trusted registered [ 2.488695] Key type encrypted registered [ 2.491666] AppArmor: AppArmor sha1 policy hashing enabled [ 2.494607] ima: No TPM chip found, activating TPM-bypass! [ 2.497549] evm: HMAC attrs: 0x1 [ 2.500733] Magic number: 8:119:627 [ 2.503628] usb usb9-port1: hash matches [ 2.506619] rtc_cmos 00:02: setting system clock to 2016-07-21 09:37:05 UTC (1469093825) [ 2.509773] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.510296] tsc: Refined TSC clocksource calibration: 3221.631 MHz [ 2.510298] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e701bf4283, max_idle_ns: 440795301515 ns [ 2.519237] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.522352] EDD information not available. [ 2.525443] PM: Hibernation image not present or could not be loaded. [ 2.526990] Freeing unused kernel memory: 2116K (ffffffff81d40000 - ffffffff81f51000) [ 2.530077] Write protecting the kernel read-only data: 12288k [ 2.533427] Freeing unused kernel memory: 104K (ffff8800017e6000 - ffff880001800000) [ 2.537168] Freeing unused kernel memory: 188K (ffff880001bd1000 - ffff880001c00000) [ 2.554342] systemd-udevd[148]: starting version 204 [ 2.562037] floppy: module verification failed: signature and/or required key missing - tainting kernel [ 2.566520] wmi: Mapper loaded [ 2.566874] Floppy drive(s): fd0 is unknown type 13 (usb?) [ 2.567367] usb 7-1: New USB device found, idVendor=03f0, idProduct=0405 [ 2.567368] usb 7-1: New USB device strings: Mfr=10, Product=11, SerialNumber=12 [ 2.567370] usb 7-1: Product: Hewlett-Packard ScanJet 3400C [ 2.567371] usb 7-1: Manufacturer: Hewlett-Packard [ 2.567371] usb 7-1: SerialNumber: CN15E1D1RWTG [ 2.589990] [drm] Initialized drm 1.1.0 20060810 [ 2.590874] scsi host0: pata_atiixp [ 2.591027] scsi host1: pata_atiixp [ 2.591065] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.591066] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.606914] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.610111] 8139cp 0000:04:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.613582] hidraw: raw HID events driver (C) Jiri Kosina [ 2.616979] ahci 0000:00:11.0: version 3.0 [ 2.617109] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.617310] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.617312] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.618118] scsi host2: ahci [ 2.619286] scsi host3: ahci [ 2.619498] scsi host4: ahci [ 2.619762] scsi host5: ahci [ 2.619838] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19 [ 2.619840] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19 [ 2.619842] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19 [ 2.619843] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19 [ 2.634389] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.634398] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.634916] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000e78000, 90:2b:34:a8:5c:23, XID 0c900800 IRQ 26 [ 2.634917] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.640578] usbcore: registered new interface driver usbhid [ 2.640578] usbhid: USB HID core driver [ 2.671532] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:248A:8366.0001/input/input3 [ 2.682566] 8139too 0000:04:06.0 eth1: RealTek RTL8139 at 0x000000000001be00, 00:30:bd:1b:01:d1, IRQ 20 [ 2.686915] checking generic (df000000 300000) vs hw (c0000000 10000000) [ 2.686918] checking generic (df000000 300000) vs hw (de000000 2000000) [ 2.686920] fb: switching to nouveaufb from VESA VGA [ 2.690588] Console: switching to colour dummy device 80x25 [ 2.690773] nouveau 0000:01:00.0: NVIDIA GK107 (0e7060a2) [ 2.730484] hid-generic 0003:248A:8366.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:12.0-2/input0 [ 2.734323] usb 3-2.1: new full-speed USB device number 5 using ehci-pci [ 2.803266] nouveau 0000:01:00.0: bios: version 80.07.35.00.38 [ 2.804407] nouveau 0000:01:00.0: fb: 1024 MiB GDDR5 [ 2.848620] usb 3-2.1: New USB device found, idVendor=03f0, idProduct=0317 [ 2.848628] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.848633] usb 3-2.1: Product: HP LaserJet 1200 [ 2.848636] usb 3-2.1: Manufacturer: HewLett Packard [ 2.848638] usb 3-2.1: SerialNumber: 00CNC2433505 [ 2.866277] usb 7-3: new full-speed USB device number 3 using ohci-pci [ 2.929822] ata6: SATA link down (SStatus 0 SControl 300) [ 3.039395] usb 7-3: New USB device found, idVendor=046d, idProduct=c52b [ 3.039403] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.039406] usb 7-3: Product: USB Receiver [ 3.039408] usb 7-3: Manufacturer: Logitech [ 3.086324] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.086380] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.087169] ata3.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133 [ 3.087176] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.088038] ata3.00: configured for UDMA/133 [ 3.090281] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.093469] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NS70, GN00, max UDMA/100 [ 3.097777] ata5.00: configured for UDMA/100 [ 3.100491] ata4.00: ATA-8: WDC WD10EAVS-00D7B0, 01.01A01, max UDMA/133 [ 3.100495] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.101419] ata4.00: configured for UDMA/133 [ 3.161216] ata1.00: supports DRM functions and may not be fully accessible [ 3.161225] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133 [ 3.161228] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 3.187374] ata1.01: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133 [ 3.187378] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.187383] ata1.00: limited to UDMA/33 due to 40-wire cable [ 3.187386] ata1.01: limited to UDMA/33 due to 40-wire cable [ 3.191084] ata1.00: supports DRM functions and may not be fully accessible [ 3.191518] ata1.00: configured for UDMA/33 [ 3.195245] ata1.01: configured for UDMA/33 [ 3.195519] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 3.242487] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.242521] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.242730] scsi 0:0:1:0: Direct-Access ATA WDC WD10EADS-00P 0A01 PQ: 0 ANSI: 5 [ 3.242788] sd 0:0:0:0: [sda] Write Protect is off [ 3.242797] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.242854] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.243648] sda: sda1 [ 3.244152] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.306510] sd 0:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.306529] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 3.306700] sd 0:0:1:0: [sdb] Write Protect is off [ 3.306709] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.306765] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5 [ 3.306780] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.321402] sdb: sdb1 sdb2 sdb3 sdb4 [ 3.321963] sd 0:0:1:0: [sdb] Attached SCSI disk [ 3.322276] usb 7-4: new full-speed USB device number 4 using ohci-pci [ 3.370474] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.370503] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.370690] sd 2:0:0:0: [sdc] Write Protect is off [ 3.370699] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.370744] scsi 3:0:0:0: Direct-Access ATA WDC WD10EAVS-00D 1A01 PQ: 0 ANSI: 5 [ 3.370761] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.403503] sdc: sdc1 sdc2 sdc3 sdc4 [ 3.404094] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.466495] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.466507] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.466705] sd 3:0:0:0: [sdd] Write Protect is off [ 3.466713] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.466784] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.469570] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS70 GN00 PQ: 0 ANSI: 5 [ 3.471670] sdd: sdd1 sdd2 sdd3 [ 3.472247] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.489857] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.489863] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.490004] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.490100] sr 4:0:0:0: Attached scsi generic sg4 type 5 [ 3.491393] usb 7-4: New USB device found, idVendor=03f0, idProduct=3602 [ 3.491402] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.491406] usb 7-4: Product: photosmart 1315 [ 3.491409] usb 7-4: Manufacturer: hp [ 3.491412] usb 7-4: SerialNumber: MY19L150W8TS [ 3.499659] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-3/input2 [ 3.522295] clocksource: Switched to clocksource tsc [ 3.763993] random: nonblocking pool is initialized [ 4.102613] [TTM] Zone kernel: Available graphics memory: 4086632 kiB [ 4.102620] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.102623] [TTM] Initializing pool allocator [ 4.102630] [TTM] Initializing DMA pool allocator [ 4.102642] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB [ 4.102646] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 4.102668] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 4.102671] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 4.102674] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000f00 00000000 [ 4.102678] nouveau 0000:01:00.0: DRM: DCB outp 01: 01011f72 00020030 [ 4.102681] nouveau 0000:01:00.0: DRM: DCB outp 02: 08022f82 00020030 [ 4.102684] nouveau 0000:01:00.0: DRM: DCB outp 03: 02033f62 00020010 [ 4.102687] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000000 [ 4.102689] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001131 [ 4.102692] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010231 [ 4.102695] nouveau 0000:01:00.0: DRM: DCB conn 03: 00002361 [ 4.104012] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.104015] [drm] Driver supports precise vblank timestamp query. [ 4.161564] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 4.376861] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff8800bf588400 [ 4.376948] fbcon: nouveaufb (fb0) is primary device [ 4.612854] Console: switching to colour frame buffer device 160x64 [ 4.614899] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 4.626337] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 5.590369] floppy0: no floppy controllers found [ 11.100364] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.330668] init: ureadahead main process (347) terminated with status 5 [ 11.410793] Adding 4032508k swap on /dev/sdc3. Priority:-1 extents:1 across:4032508k FS [ 11.439108] Adding 17572860k swap on /dev/sdb3. Priority:-2 extents:1 across:17572860k FS [ 11.973176] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.126775] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 12.151736] REISERFS (device sdc4): found reiserfs format "3.6" with standard journal [ 12.151751] REISERFS (device sdc4): using ordered data mode [ 12.151754] reiserfs: using flush barriers [ 12.174173] REISERFS (device sdc4): journal params: device sdc4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 12.174636] REISERFS (device sdc4): checking transaction log (sdc4) [ 12.276404] REISERFS (device sdc4): Using r5 hash to sort names [ 12.342076] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 12.343461] XFS (sdb2): Mounting V4 Filesystem [ 12.490758] XFS (sdb2): Ending clean mount [ 12.595513] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [ 12.683928] EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: (null) [ 14.273882] systemd-udevd[563]: starting version 204 [ 14.283150] FS-Cache: Loaded [ 14.294733] RPC: Registered named UNIX socket transport module. [ 14.294736] RPC: Registered udp transport module. [ 14.294738] RPC: Registered tcp transport module. [ 14.294739] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.311530] FS-Cache: Netfs 'nfs' registered for caching [ 14.321213] lp: driver loaded but no devices found [ 14.328689] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 14.335644] it87: Found IT8728F chip at 0x228, revision 1 [ 14.335661] it87: Beeping is supported [ 14.344392] ppdev: user-space parallel port driver [ 14.427638] Floppy drive(s): fd0 is unknown type 13 (usb?) [ 14.429248] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160108/utaddress-255) [ 14.429255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.433159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.593545] device-mapper: multipath: version 1.10.0 loaded [ 14.605068] EDAC MC: Ver: 3.0.0 [ 14.611025] MCE: In-kernel MCE decoding enabled. [ 14.617669] AMD64 EDAC driver v3.4.0 [ 14.617703] EDAC amd64: DRAM ECC disabled. [ 14.617709] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 14.617709] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 14.617709] (Note that use of the override may cause unknown side effects.) [ 14.638598] WARNING! power/level is deprecated; use power/control instead [ 14.681883] kvm: Nested Virtualization enabled [ 14.681890] kvm: Nested Paging enabled [ 14.683625] Bluetooth: Core ver 2.21 [ 14.683643] NET: Registered protocol family 31 [ 14.683645] Bluetooth: HCI device and connection manager initialized [ 14.683649] Bluetooth: HCI socket layer initialized [ 14.683651] Bluetooth: L2CAP socket layer initialized [ 14.683662] Bluetooth: SCO socket layer initialized [ 14.692317] Bluetooth: RFCOMM TTY layer initialized [ 14.692325] Bluetooth: RFCOMM socket layer initialized [ 14.692330] Bluetooth: RFCOMM ver 1.11 [ 14.704636] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.704641] Bluetooth: BNEP filters: protocol multicast [ 14.704647] Bluetooth: BNEP socket layer initialized [ 14.706105] init: cups main process (794) killed by HUP signal [ 14.706114] init: cups main process ended, respawning [ 14.717407] snd_hda_intel 0000:01:00.1: Disabling MSI [ 14.717415] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 14.718689] input: Logitech K270 as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.2/0003:046D:C52B.0004/0003:046D:4003.0005/input/input4 [ 14.718904] logitech-hidpp-device 0003:046D:4003.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:16.0-3:2 [ 14.726669] input: Logitech M187 as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.2/0003:046D:C52B.0004/0003:046D:4019.0006/input/input5 [ 14.726841] logitech-hidpp-device 0003:046D:4019.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M187] on usb-0000:00:16.0-3:3 [ 14.733332] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 14.733336] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.733339] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 14.733340] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 14.733342] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 14.733343] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 14.733345] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 14.733346] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 14.733348] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 14.733349] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c [ 14.749335] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 14.749404] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 14.749479] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 14.749569] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 15.048093] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 15.089472] init: failsafe main process (1027) killed by TERM signal [ 15.839993] init: samba-ad-dc main process (1415) terminated with status 1 [ 15.988639] r8169 0000:03:00.0 eth0: link down [ 15.988656] r8169 0000:03:00.0 eth0: link down [ 15.988711] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.990726] 8139too 0000:04:06.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 16.001501] usblp 3-2.1:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 [ 16.005704] usblp 7-4:1.0: usblp2: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3602 [ 16.005760] usbcore: registered new interface driver usblp [ 16.103309] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 16.103429] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 16.103495] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 16.392209] init: plymouth-upstart-bridge main process ended, respawning [ 17.250447] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.254041] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 17.451012] floppy0: no floppy controllers found [ 17.692117] vboxdrv: Found 6 processor cores [ 17.710674] vboxdrv: TSC mode is Invariant, tentative frequency 3221602627 Hz [ 17.710677] vboxdrv: Successfully loaded version 5.0.26 (interface 0x00240000) [ 17.913895] VBoxNetFlt: Successfully started. [ 17.915691] VBoxNetAdp: Successfully started. [ 17.917226] VBoxPciLinuxInit [ 17.918893] vboxpci: IOMMU found [ 17.921460] r8169 0000:03:00.0 eth0: link up [ 17.921471] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.249338] init: plymouth-stop pre-start process (2767) terminated with status 1 [ 28.788541] snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 4011.789011] nouveau 0000:01:00.0: fifo: read fault at 0007960000 engine 1b [CE2] client 18 [GR_CE] reason 02 [PTE] on channel 6 [003f829000 opera-developer[5101]] [ 4011.789021] nouveau 0000:01:00.0: fifo: ce2 engine fault on channel 6, recovering... [ 4016.083636] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4020.378575] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4024.673513] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4028.968450] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4033.263426] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4036.404132] NMI watchdog: BUG: soft lockup - CPU#4 stuck for 23s! [kworker/4:1:6743] [ 4036.404135] Modules linked in: xt_tcpudp(E) iptable_filter(E) pci_stub(E) vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) iptable_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) nf_nat(E) nf_conntrack(E) ip_tables(E) x_tables(E) usblp(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) joydev(E) snd_hda_intel(E) hid_logitech_hidpp(E) snd_hda_codec(E) bnep(E) snd_hda_core(E) rfcomm(E) snd_hwdep(E) bluetooth(E) kvm_amd(E) snd_pcm(E) kvm(E) snd_seq_midi(E) snd_seq_midi_event(E) snd_rawmidi(E) irqbypass(E) snd_seq(E) edac_mce_amd(E) edac_core(E) serio_raw(E) snd_seq_device(E) dm_multipath(E) snd_timer(E) k10temp(E) snd(E) soundcore(E) shpchp(E) i2c_piix4(E) parport_pc(E) ppdev(E) it87(E) hwmon_vid(E) nfsd(E) binfmt_misc(E) auth_rpcgss(E) nfs_acl(E) lp(E) parport(E) nfs(E) lockd(E) grace(E) sunrpc(E) fscache(E) xfs(E) libcrc32c(E) reiserfs(E) dm_mirror(E) dm_region_hash(E) dm_log(E) hid_logitech_dj(E) pata_acpi(E) nouveau(E) mxm_wmi(E) video(E) i2c_algo_bit(E) ttm(E) hid_generic(E) drm_kms_helper(E) usbhid(E) 8139too(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) hid(E) 8139cp(E) r8169(E) ahci(E) pata_atiixp(E) mii(E) libahci(E) drm(E) wmi(E) [ 4036.404204] CPU: 4 PID: 6743 Comm: kworker/4:1 Tainted: G OE 4.5.3 #1 [ 4036.404206] Hardware name: Gigabyte Technology Co., Ltd. GA-970A-DS3/GA-970A-DS3, BIOS F6 10/23/2012 [ 4036.404269] Workqueue: events gk104_fifo_recover_work [nouveau] [ 4036.404272] task: ffff8801fd3e5b00 ti: ffff88006e148000 task.ti: ffff88006e148000 [ 4036.404274] RIP: 0010:[] [] gk104_fifo_recover_work+0x95/0x280 [nouveau] [ 4036.404319] RSP: 0018:ffff88006e14bde0 EFLAGS: 00000206 [ 4036.404322] RAX: 0000000000000021 RBX: 0000000200000000 RCX: 0000000000000021 [ 4036.404324] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000282 [ 4036.404326] RBP: ffff88006e14be18 R08: ffff880098294b40 R09: 00000001802a001b [ 4036.404328] R10: 0000000098294d01 R11: 0000000000008000 R12: 0000000200000000 [ 4036.404330] R13: 0000000000000001 R14: ffff880231edec00 R15: ffff880231980ae0 [ 4036.404333] FS: 00007f49e9885700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000 [ 4036.404335] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4036.404337] CR2: 00007f4d3f20d008 CR3: 0000000233f31000 CR4: 00000000000006e0 [ 4036.404339] Stack: [ 4036.404341] ffff880098294b40 ffff880231980800 ffff8801e5b35240 ffff88023fd16300 [ 4036.404344] ffff88023fd1ac00 0000000000000100 ffff880231980ae0 ffff88006e14be60 [ 4036.404348] ffffffff81093ac3 00000000e5b35270 0000000000000000 ffff88023fd16320 [ 4036.404351] Call Trace: [ 4036.404358] [] process_one_work+0x153/0x3f0 [ 4036.404361] [] worker_thread+0x12a/0x4b0 [ 4036.404365] [] ? __schedule+0x35a/0x970 [ 4036.404368] [] ? rescuer_thread+0x350/0x350 [ 4036.404372] [] kthread+0xc9/0xe0 [ 4036.404376] [] ? kthread_park+0x60/0x60 [ 4036.404380] [] ret_from_fork+0x3f/0x70 [ 4036.404383] [] ? kthread_park+0x60/0x60 [ 4036.404385] Code: f8 11 0f 87 9a 01 00 00 ff 24 c5 f8 ea 2b c0 b8 02 00 00 00 41 09 c5 b8 fe ff ff ff d3 c0 48 98 49 21 c4 f3 49 0f bc c4 4d 85 e4 <75> cd 49 8b 86 80 00 00 00 48 8d b8 30 26 00 00 e8 16 be 19 c1 [ 4037.558363] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4041.853302] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4046.148240] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4050.443181] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4054.738121] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4059.033058] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4063.327996] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4064.404618] NMI watchdog: BUG: soft lockup - CPU#4 stuck for 23s! [kworker/4:1:6743] [ 4064.404620] Modules linked in: xt_tcpudp(E) iptable_filter(E) pci_stub(E) vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) iptable_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) nf_nat(E) nf_conntrack(E) ip_tables(E) x_tables(E) usblp(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) joydev(E) snd_hda_intel(E) hid_logitech_hidpp(E) snd_hda_codec(E) bnep(E) snd_hda_core(E) rfcomm(E) snd_hwdep(E) bluetooth(E) kvm_amd(E) snd_pcm(E) kvm(E) snd_seq_midi(E) snd_seq_midi_event(E) snd_rawmidi(E) irqbypass(E) snd_seq(E) edac_mce_amd(E) edac_core(E) serio_raw(E) snd_seq_device(E) dm_multipath(E) snd_timer(E) k10temp(E) snd(E) soundcore(E) shpchp(E) i2c_piix4(E) parport_pc(E) ppdev(E) it87(E) hwmon_vid(E) nfsd(E) binfmt_misc(E) auth_rpcgss(E) nfs_acl(E) lp(E) parport(E) nfs(E) lockd(E) grace(E) sunrpc(E) fscache(E) xfs(E) libcrc32c(E) reiserfs(E) dm_mirror(E) dm_region_hash(E) dm_log(E) hid_logitech_dj(E) pata_acpi(E) nouveau(E) mxm_wmi(E) video(E) i2c_algo_bit(E) ttm(E) hid_generic(E) drm_kms_helper(E) usbhid(E) 8139too(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) hid(E) 8139cp(E) r8169(E) ahci(E) pata_atiixp(E) mii(E) libahci(E) drm(E) wmi(E) [ 4064.404683] CPU: 4 PID: 6743 Comm: kworker/4:1 Tainted: G OEL 4.5.3 #1 [ 4064.404685] Hardware name: Gigabyte Technology Co., Ltd. GA-970A-DS3/GA-970A-DS3, BIOS F6 10/23/2012 [ 4064.404746] Workqueue: events gk104_fifo_recover_work [nouveau] [ 4064.404750] task: ffff8801fd3e5b00 ti: ffff88006e148000 task.ti: ffff88006e148000 [ 4064.404752] RIP: 0010:[] [] gk104_fifo_recover_work+0x92/0x280 [nouveau] [ 4064.404796] RSP: 0018:ffff88006e14bde0 EFLAGS: 00000206 [ 4064.404799] RAX: 0000000000000021 RBX: 0000000200000000 RCX: 0000000000000021 [ 4064.404801] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000282 [ 4064.404803] RBP: ffff88006e14be18 R08: ffff880098294b40 R09: 00000001802a001b [ 4064.404805] R10: 0000000098294d01 R11: 0000000000008000 R12: 0000000200000000 [ 4064.404807] R13: 0000000000000001 R14: ffff880231edec00 R15: ffff880231980ae0 [ 4064.404809] FS: 00007f49e9885700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000 [ 4064.404811] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4064.404813] CR2: 00007f4d3f20d008 CR3: 0000000233f31000 CR4: 00000000000006e0 [ 4064.404816] Stack: [ 4064.404817] ffff880098294b40 ffff880231980800 ffff8801e5b35240 ffff88023fd16300 [ 4064.404821] ffff88023fd1ac00 0000000000000100 ffff880231980ae0 ffff88006e14be60 [ 4064.404824] ffffffff81093ac3 00000000e5b35270 0000000000000000 ffff88023fd16320 [ 4064.404827] Call Trace: [ 4064.404834] [] process_one_work+0x153/0x3f0 [ 4064.404837] [] worker_thread+0x12a/0x4b0 [ 4064.404841] [] ? __schedule+0x35a/0x970 [ 4064.404844] [] ? rescuer_thread+0x350/0x350 [ 4064.404848] [] kthread+0xc9/0xe0 [ 4064.404851] [] ? kthread_park+0x60/0x60 [ 4064.404856] [] ret_from_fork+0x3f/0x70 [ 4064.404859] [] ? kthread_park+0x60/0x60 [ 4064.404861] Code: e8 17 83 f8 11 0f 87 9a 01 00 00 ff 24 c5 f8 ea 2b c0 b8 02 00 00 00 41 09 c5 b8 fe ff ff ff d3 c0 48 98 49 21 c4 f3 49 0f bc c4 <4d> 85 e4 75 cd 49 8b 86 80 00 00 00 48 8d b8 30 26 00 00 e8 16 [ 4067.622934] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4071.796744] INFO: rcu_sched self-detected stall on CPU [ 4071.796751] 4-...: (15000 ticks this GP) idle=47b/140000000000001/0 softirq=374433/374433 fqs=14495 [ 4071.796753] (t=15000 jiffies g=289046 c=289045 q=4218) [ 4071.796757] Task dump for CPU 4: [ 4071.796759] kworker/4:1 R running task 0 6743 2 0x00000008 [ 4071.796809] Workqueue: events gk104_fifo_recover_work [nouveau] [ 4071.796811] ffffffff81c53e40 ffff88023fd03dc8 ffffffff810a7fbf 0000000000000004 [ 4071.796815] ffffffff81c53e40 ffff88023fd03de0 ffffffff810aa7f9 0000000000000005 [ 4071.796818] ffff88023fd03e10 ffffffff810dda77 ffff88023fd178c0 ffffffff81c53e40 [ 4071.796821] Call Trace: [ 4071.796823] [] sched_show_task+0xaf/0x110 [ 4071.796831] [] dump_cpu_task+0x39/0x40 [ 4071.796834] [] rcu_dump_cpu_stacks+0x87/0xc0 [ 4071.796838] [] rcu_check_callbacks+0x470/0x720 [ 4071.796841] [] ? account_system_time+0x81/0x110 [ 4071.796844] [] ? account_process_tick+0x6b/0x170 [ 4071.796872] [] ? nvkm_engine_intr+0x1f/0x30 [nouveau] [ 4071.796876] [] ? tick_sched_do_timer+0x30/0x30 [ 4071.796880] [] update_process_times+0x42/0x70 [ 4071.796883] [] tick_sched_handle.isra.15+0x23/0x60 [ 4071.796886] [] tick_sched_timer+0x48/0x80 [ 4071.796889] [] __hrtimer_run_queues+0xe0/0x250 [ 4071.796893] [] hrtimer_interrupt+0xa7/0x1a0 [ 4071.796898] [] local_apic_timer_interrupt+0x35/0x60 [ 4071.796901] [] smp_apic_timer_interrupt+0x3d/0x50 [ 4071.796905] [] apic_timer_interrupt+0x82/0x90 [ 4071.796906] [] ? gk104_fifo_recover_work+0x140/0x280 [nouveau] [ 4071.796951] [] process_one_work+0x153/0x3f0 [ 4071.796954] [] worker_thread+0x12a/0x4b0 [ 4071.796957] [] ? __schedule+0x35a/0x970 [ 4071.796960] [] ? rescuer_thread+0x350/0x350 [ 4071.796964] [] kthread+0xc9/0xe0 [ 4071.796967] [] ? kthread_park+0x60/0x60 [ 4071.796970] [] ret_from_fork+0x3f/0x70 [ 4071.796974] [] ? kthread_park+0x60/0x60 [ 4071.917872] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4076.212810] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4080.507748] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4084.802686] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 4089.097624] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT]