[ 0.000000] Linux version 4.8.0-rc3+ (pavel@hal) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Thu Aug 25 19:21:10 UTC 2016 [ 0.000000] Command line: vmlinuz-4.8.0-rc3+ root=/dev/sda2 rw drm.debug=14 fbcon=rotate:3 initrd=initrd.img-4.8.0-rc3+ log_buf_len=16M [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000079d6bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079d6c000-0x0000000079d9bfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079d9c000-0x000000007a0cefff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a0cf000-0x000000007adc5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007adc6000-0x000000007b8a9fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b8aa000-0x000000007bffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x7b813018 ACPI=0x7a113000 ACPI 2.0=0x7a113000 SMBIOS=0x7b73ab18 [ 0.000000] esrt: Reserving ESRT space from 0x000000007b813018 to 0x000000007b813050. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. T100HAN/T100HAN, BIOS T100HAN.216 12/31/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07E000000 mask FFE000000 uncachable [ 0.000000] 2 base 07D000000 mask FFF000000 uncachable [ 0.000000] 3 base 07C800000 mask FFF800000 uncachable [ 0.000000] 4 base 100000000 mask F80000000 write-back [ 0.000000] 5 base 07C400000 mask FFFC00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0x7c400000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff97a940098000] 98000 size 24576 [ 0.000000] BRK [0x5a96c000, 0x5a96cfff] PGTABLE [ 0.000000] BRK [0x5a96d000, 0x5a96dfff] PGTABLE [ 0.000000] BRK [0x5a96e000, 0x5a96efff] PGTABLE [ 0.000000] BRK [0x5a96f000, 0x5a96ffff] PGTABLE [ 0.000000] BRK [0x5a970000, 0x5a970fff] PGTABLE [ 0.000000] BRK [0x5a971000, 0x5a971fff] PGTABLE [ 0.000000] BRK [0x5a972000, 0x5a972fff] PGTABLE [ 0.000000] BRK [0x5a973000, 0x5a973fff] PGTABLE [ 0.000000] log_buf_len: 16777216 bytes [ 0.000000] early log buf free: 126716(96%) [ 0.000000] RAMDISK: [mem 0x74b21000-0x75be4fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007A113000 000024 (v02 _ASUS_) [ 0.000000] ACPI: XSDT 0x000000007A1130B8 0000EC (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007A12EB08 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007A113230 01B8D1 (v02 _ASUS_ Notebook 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x000000007ADC5F80 000040 [ 0.000000] ACPI: APIC 0x000000007A12EC18 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007A12ECA0 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000007A12ECE8 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000007A12ED88 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000007A12EDC8 004143 (v01 DptfTb DptfTab 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007A132F10 000654 (v01 CpuDpf CpuDptf 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007A133568 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x000000007A1335C0 000042 (v01 _ASUS_ Notebook 00000000 00000000) [ 0.000000] ACPI: HPET 0x000000007A133608 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x000000007A133640 000763 (v01 PmRef CpuPm 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007A133DA8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007A134038 00017A (v01 PmRef ApTst 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007A1341B8 00043A (v01 Intel_ Tpm2Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: TPM2 0x000000007A1345F8 000034 (v03 00000000 00000000) [ 0.000000] ACPI: LPIT 0x000000007A134630 000104 (v01 _ASUS_ Notebook 00000005 MSFT 0100000D) [ 0.000000] ACPI: BCFG 0x000000007A134738 000139 (v01 INTEL BATTCONF 00000001 INTL 00000000) [ 0.000000] ACPI: PRAM 0x000000007A134878 000030 (v01 00000001 00000000) [ 0.000000] ACPI: CSRT 0x000000007A1348A8 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) [ 0.000000] ACPI: WDAT 0x000000007A1349F8 000104 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x000000007A134B00 004143 (v01 DptfTb DptfTab 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007A138C48 000654 (v01 CpuDpf CpuDptf 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000007A1392A0 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913) [ 0.000000] ACPI: BGRT 0x000000007A1392F8 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: MSDM 0x0000000079D98F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x17eff9000-0x17effdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000079d6bfff] [ 0.000000] node 0: [mem 0x0000000079d9c000-0x000000007a0cefff] [ 0.000000] node 0: [mem 0x000000007b8aa000-0x000000007bffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.000000] On node 0 totalpages: 1021329 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7704 pages used for memmap [ 0.000000] DMA32 zone: 493045 pages, LIFO batch:31 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007cd00000-0x000000007ecfffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79d6c000-0x79d9bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a0cf000-0x7adc5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7adc6000-0x7b8a9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7ccfffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7cd00000-0x7ecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ed00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0x7ed00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff97aabec00000 s103320 r8192 d31848 u524288 [ 0.000000] pcpu-alloc: s103320 r8192 d31848 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005348 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vmlinuz-4.8.0-rc3+ root=/dev/sda2 rw drm.debug=14 fbcon=rotate:3 initrd=initrd.img-4.8.0-rc3+ log_buf_len=16M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3852764K/4085316K available (6157K kernel code, 1164K rwdata, 2848K rodata, 1368K init, 932K bss, 232552K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 1440.000 MHz processor [ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 2880.00 BogoMIPS (lpj=5760000) [ 0.000060] pid_max: default: 32768 minimum: 301 [ 0.000101] ACPI: Core revision 20160422 [ 0.103904] ACPI Error: [BDLI] Namespace lookup failure, AE_ALREADY_EXISTS (20160422/dswload-378) [ 0.103936] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160422/psobject-227) [ 0.104107] ACPI Exception: AE_ALREADY_EXISTS, (SSDT: DptfTab) while loading table (20160422/tbxfload-227) [ 0.104159] ACPI Error: [PNIT] Namespace lookup failure, AE_ALREADY_EXISTS (20160422/dswload-378) [ 0.104183] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160422/psobject-227) [ 0.104333] ACPI Exception: AE_ALREADY_EXISTS, (SSDT: CpuDptf) while loading table (20160422/tbxfload-227) [ 0.104373] ACPI Error: [LPSP] Namespace lookup failure, AE_ALREADY_EXISTS (20160422/dswload-378) [ 0.104396] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160422/psobject-227) [ 0.104545] ACPI Exception: AE_ALREADY_EXISTS, (SSDT: LowPwrM) while loading table (20160422/tbxfload-227) [ 0.104565] ACPI Error: 3 table load failures, 8 successful (20160422/tbxfload-247) [ 0.106489] Security Framework initialized [ 0.106504] Yama: becoming mindful. [ 0.106524] AppArmor: AppArmor disabled by boot time parameter [ 0.107108] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.109677] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.110845] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.110879] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.111505] CPU: Physical Processor ID: 0 [ 0.111519] CPU: Processor Core ID: 0 [ 0.111534] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.111543] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.111563] mce: CPU supports 6 MCE banks [ 0.111585] CPU0: Thermal monitoring enabled (TM1) [ 0.111605] process: using mwait in idle threads [ 0.111620] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.111629] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 [ 0.112188] Freeing SMP alternatives memory: 24K (ffffffffa4e7b000 - ffffffffa4e81000) [ 0.120493] ftrace: allocating 24961 entries in 98 pages [ 0.137617] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.137635] smpboot: Max logical packages: 1 [ 0.139355] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.179062] TSC deadline timer enabled [ 0.179071] smpboot: CPU0: Intel(R) Atom(TM) x5-Z8500 CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x3) [ 0.179097] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.179153] ... version: 3 [ 0.179163] ... bit width: 40 [ 0.179173] ... generic registers: 2 [ 0.179181] ... value mask: 000000ffffffffff [ 0.179189] ... max period: 000000ffffffffff [ 0.179198] ... fixed-purpose events: 3 [ 0.179206] ... event mask: 0000000700000003 [ 0.180846] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.181244] x86: Booting SMP configuration: [ 0.181257] .... node #0, CPUs: #1 #2 #3 [ 0.421515] x86: Booted up 1 node, 4 CPUs [ 0.421533] smpboot: Total of 4 processors activated (11527.72 BogoMIPS) [ 0.431603] devtmpfs: initialized [ 0.431808] x86/mm: Memory block size: 128MB [ 0.451499] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.451519] PM: Registering ACPI NVS region [mem 0x7a0cf000-0x7adc5fff] (13594624 bytes) [ 0.452569] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.465426] pinctrl core: initialized pinctrl subsystem [ 0.477676] NET: Registered protocol family 16 [ 0.493421] cpuidle: using governor ladder [ 0.509445] cpuidle: using governor menu [ 0.509543] ACPI: bus type PCI registered [ 0.509556] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.541633] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.541655] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.541669] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.541704] PCI: Using configuration type 1 for base access [ 0.557872] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.589676] ACPI: Added _OSI(Module Device) [ 0.589692] ACPI: Added _OSI(Processor Device) [ 0.589701] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.589710] ACPI: Added _OSI(Processor Aggregator Device) [ 0.649942] ACPI: Dynamic OEM Table Load: [ 0.649974] ACPI: SSDT 0xFFFF97AAB9739000 000620 (v01 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.653392] ACPI: Dynamic OEM Table Load: [ 0.653414] ACPI: SSDT 0xFFFF97AAB97AE800 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.657840] ACPI: Dynamic OEM Table Load: [ 0.657861] ACPI: SSDT 0xFFFF97AAB9737200 00015F (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.661081] ACPI: Dynamic OEM Table Load: [ 0.661101] ACPI: SSDT 0xFFFF97AAB9738180 00008D (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.670363] ACPI: Interpreter enabled [ 0.670437] ACPI: (supports S0 S4 S5) [ 0.670449] ACPI: Using IOAPIC for interrupt routing [ 0.670581] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.672090] ACPI: Power Resource [P33X] (off) [ 0.675600] ACPI: Power Resource [ID3C] (on) [ 0.679859] ACPI: Power Resource [USBC] (on) [ 0.682598] ACPI: Power Resource [WWPR] (off) [ 0.684027] ACPI: Power Resource [WWPR] (off) [ 0.704191] ACPI: Power Resource [CLK3] (on) [ 0.704375] ACPI: Power Resource [CLK4] (off) [ 0.722677] ACPI: Power Resource [CLK2] (on) [ 0.722852] ACPI: Power Resource [CLK0] (on) [ 0.723033] ACPI: Power Resource [CLK1] (on) [ 0.724153] ACPI: Power Resource [P12X] (off) [ 0.724322] ACPI: Power Resource [P28X] (off) [ 0.724497] ACPI: Power Resource [P18X] (off) [ 0.726032] ACPI: Power Resource [CLK0] (on) [ 0.726205] ACPI: Power Resource [CLK1] (on) [ 0.748752] ACPI: Power Resource [P28P] (off) [ 0.748928] ACPI: Power Resource [P18P] (off) [ 0.749103] ACPI: Power Resource [P19X] (off) [ 0.749276] ACPI: Power Resource [P06X] (off) [ 0.749444] ACPI: Power Resource [P28T] (off) [ 0.749621] ACPI: Power Resource [P18D] (off) [ 0.749797] ACPI: Power Resource [P18T] (off) [ 0.749972] ACPI: Power Resource [P3P3] (off) [ 0.750140] ACPI: Power Resource [P12T] (off) [ 0.750316] ACPI: Power Resource [P28W] (off) [ 0.750487] ACPI: Power Resource [P18W] (off) [ 0.750660] ACPI: Power Resource [P12W] (off) [ 0.750832] ACPI: Power Resource [P33W] (off) [ 0.765438] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.765468] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.766677] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.766746] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.769074] PCI host bridge to bus 0000:00 [ 0.769092] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.769105] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.769116] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.769128] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.769140] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.769158] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.769173] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.769189] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window] [ 0.769204] pci_bus 0000:00: root bus resource [mem 0x7cd00001-0x7ed00000 window] [ 0.769219] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.769236] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.769263] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.769871] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000 [ 0.769903] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.769919] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.769930] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.770464] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000 [ 0.770485] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x913fffff] [ 0.771006] pci 0000:00:0a.0: [8086:22d8] type 00 class 0x000000 [ 0.771032] pci 0000:00:0a.0: reg 0x10: [mem 0x9183a000-0x9183afff] [ 0.771670] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000 [ 0.771698] pci 0000:00:0b.0: reg 0x10: [mem 0x91839000-0x91839fff 64bit] [ 0.772311] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.772347] pci 0000:00:14.0: reg 0x10: [mem 0x91800000-0x9180ffff 64bit] [ 0.772462] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.772979] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.773004] pci 0000:00:1a.0: reg 0x10: [mem 0x91700000-0x917fffff] [ 0.773018] pci 0000:00:1a.0: reg 0x14: [mem 0x91600000-0x916fffff] [ 0.773125] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.773609] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.794653] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.795002] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.795341] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.795679] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.796012] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.796347] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.796682] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.797016] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled. [ 0.823498] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.823516] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.823534] vgaarb: loaded [ 0.823544] vgaarb: bridge control possible 0000:00:02.0 [ 0.828594] PCI: Using ACPI for IRQ routing [ 0.831368] PCI: pci_cache_line_size set to 64 bytes [ 0.831423] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.831439] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.831443] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.831446] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.831448] e820: reserve RAM buffer [mem 0x79d6c000-0x7bffffff] [ 0.831451] e820: reserve RAM buffer [mem 0x7a0cf000-0x7bffffff] [ 0.831919] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.831939] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.834006] clocksource: Switched to clocksource hpet [ 0.850557] VFS: Disk quotas dquot_6.6.0 [ 0.866040] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.882226] pnp: PnP ACPI init [ 0.882742] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.882761] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.882773] system 00:00: [io 0x0500-0x05fe] has been reserved [ 0.882791] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.883092] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.886326] system 00:02: [io 0x0240-0x0259] has been reserved [ 0.886345] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.894113] system 00:03: [mem 0x91837000-0x91837fff] has been reserved [ 0.894133] system 00:03: [mem 0x91835000-0x91835fff] has been reserved [ 0.894146] system 00:03: [mem 0x91833000-0x91833fff] has been reserved [ 0.894158] system 00:03: [mem 0x91822000-0x91822fff] has been reserved [ 0.894171] system 00:03: [mem 0x91820000-0x91820fff] has been reserved [ 0.894183] system 00:03: [mem 0x9181e000-0x9181efff] has been reserved [ 0.894195] system 00:03: [mem 0x9181c000-0x9181cfff] has been reserved [ 0.894208] system 00:03: [mem 0x9181a000-0x9181afff] has been reserved [ 0.894221] system 00:03: [mem 0x91818000-0x91818fff] has been reserved [ 0.894234] system 00:03: [mem 0x91831000-0x91831fff] has been reserved [ 0.894248] system 00:03: [mem 0x9182f000-0x9182ffff] has been reserved [ 0.894261] system 00:03: [mem 0x9182d000-0x9182dfff] has been reserved [ 0.894273] system 00:03: [mem 0x9182b000-0x9182bfff] has been reserved [ 0.894286] system 00:03: [mem 0x91829000-0x91829fff] has been reserved [ 0.894299] system 00:03: [mem 0x91827000-0x91827fff] has been reserved [ 0.894312] system 00:03: [mem 0x91825000-0x91825fff] has been reserved [ 0.894324] system 00:03: [mem 0x91823000-0x91823fff] has been reserved [ 0.894340] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.894753] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.894769] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.894783] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.894796] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.894808] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.894820] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.894832] system 00:04: [mem 0xfed80000-0xfedbffff] could not be reserved [ 0.894844] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.894857] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.894872] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.895592] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.898662] pnp: PnP ACPI: found 6 devices [ 0.910725] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.910764] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.910768] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.910771] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.910776] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.910779] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.910782] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.910786] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.910789] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window] [ 0.910793] pci_bus 0000:00: resource 12 [mem 0x7cd00001-0x7ed00000 window] [ 0.910796] pci_bus 0000:00: resource 13 [mem 0x80000000-0xdfffffff window] [ 1.006023] NET: Registered protocol family 2 [ 1.022149] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.022349] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.022571] TCP: Hash tables configured (established 32768 bind 32768) [ 1.022657] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.022721] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.038136] NET: Registered protocol family 1 [ 1.038189] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.038786] PCI: CLS 64 bytes, default 64 [ 1.038920] Unpacking initramfs... [ 1.726996] Freeing initrd memory: 17168K (ffff97a9b4b21000 - ffff97a9b5be5000) [ 1.727023] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.727038] software IO TLB [mem 0x70000000-0x74000000] (64MB) mapped at [ffff97a9b0000000-ffff97a9b3ffffff] [ 1.727571] simple-framebuffer simple-framebuffer.0: framebuffer at 0x80000000, 0x3e8000 bytes, mapped to 0xffffb7fc80800000 [ 1.727595] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x1280x32, linelength=3200 [ 1.738804] Console: switching to colour frame buffer device 160x50 [ 1.749918] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 1.766480] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.782005] audit: initializing netlink subsys (disabled) [ 1.782144] audit: type=2000 audit(1472194100.772:1): initialized [ 1.783182] Initialise system trusted keyrings [ 1.783534] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 1.783673] zbud: loaded [ 1.930648] Key type asymmetric registered [ 1.930727] Asymmetric key parser 'x509' registered [ 1.950022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.950242] io scheduler noop registered [ 1.950313] io scheduler deadline registered [ 1.950397] io scheduler cfq registered (default) [ 1.950626] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.950736] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.950916] intel_idle: MWAIT substates: 0x33000020 [ 1.950918] intel_idle: v0.4.1 model 0x4C [ 1.951393] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.957837] GHES: HEST is not enabled! [ 1.958184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.978774] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.987369] 8086228A:00: ttyS1 at MMIO 0x91821000 (irq = 39, base_baud = 2764800) is a 16550A [ 1.995578] 8086228A:01: ttyS2 at MMIO 0x9181f000 (irq = 40, base_baud = 2764800) is a 16550A [ 1.996832] Linux agpgart interface v0.103 [ 1.997029] AMD IOMMUv2 driver by Joerg Roedel [ 1.997136] AMD IOMMUv2 functionality not available on this system [ 1.998576] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.730406] tsc: Refined TSC clocksource calibration: 1439.953 MHz [ 2.734715] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c18e756e4, max_idle_ns: 440795259570 ns [ 3.070636] i8042: No controller found [ 3.075860] mousedev: PS/2 mouse device common for all mice [ 3.080828] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.085227] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.089593] intel_pstate: Intel P-state driver initializing [ 3.095338] ledtrig-cpu: registered to indicate activity on CPUs [ 3.214298] NET: Registered protocol family 10 [ 3.242610] mip6: Mobile IPv6 [ 3.255341] NET: Registered protocol family 17 [ 3.262309] mpls_gso: MPLS GSO support [ 3.270525] microcode: sig=0x406c3, pf=0x1, revision=0x358 [ 3.283634] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 3.288928] registered taskstats version 1 [ 3.292533] Loading compiled-in X.509 certificates [ 3.295622] zswap: loaded using pool lzo/zbud [ 3.300894] rtc_cmos 00:05: setting system clock to 2016-08-26 06:48:22 UTC (1472194102) [ 3.312643] PM: Hibernation image not present or could not be loaded. [ 3.318491] Freeing unused kernel memory: 1368K (ffffffffa4d25000 - ffffffffa4e7b000) [ 3.326168] Write protecting the kernel read-only data: 12288k [ 3.333791] Freeing unused kernel memory: 2020K (ffff97a99a007000 - ffff97a99a200000) [ 3.345591] Freeing unused kernel memory: 1248K (ffff97a99a4c8000 - ffff97a99a600000) [ 3.364445] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.504336] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.510831] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.511107] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.525983] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.526228] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.526428] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.526653] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.528044] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.528247] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.528456] random: udevadm: uninitialized urandom read (16 bytes read) [ 3.646001] mmc_core: module verification failed: signature and/or required key missing - tainting kernel [ 3.651833] sdhci: Secure Digital Host Controller Interface driver [ 3.654134] sdhci: Copyright(c) Pierre Ossman [ 3.664902] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 3.681295] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 3.685100] hidraw: raw HID events driver (C) Jiri Kosina [ 3.758010] clocksource: Switched to clocksource tsc [ 3.787865] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.790378] ACPI: Thermal Zone [TZ00] (0 C) [ 3.790727] ACPI: bus type USB registered [ 3.790774] usbcore: registered new interface driver usbfs [ 3.790793] usbcore: registered new interface driver hub [ 3.790839] usbcore: registered new device driver usb [ 3.811973] mmc0: new HS200 MMC card at address 0001 [ 4.742732] mmc1: SDHCI controller on ACPI [80860F14:03] using ADMA [ 4.754600] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.762144] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.768922] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00509810 [ 4.774988] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.775335] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.775983] mmcblk0: mmc0:0001 DWBD3R 116 GiB [ 4.776305] mmcblk0boot0: mmc0:0001 DWBD3R partition 1 4.00 MiB [ 4.776593] mmcblk0boot1: mmc0:0001 DWBD3R partition 2 4.00 MiB [ 4.776869] mmcblk0rpmb: mmc0:0001 DWBD3R partition 3 4.00 MiB [ 4.791899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.794616] usb usb1: Product: xHCI Host Controller [ 4.797318] usb usb1: Manufacturer: Linux 4.8.0-rc3+ xhci-hcd [ 4.800043] usb usb1: SerialNumber: 0000:00:14.0 [ 4.802820] hub 1-0:1.0: USB hub found [ 4.804663] mmcblk0: p1 p2 p3 p4 [ 4.807072] hub 1-0:1.0: 7 ports detected [ 4.811623] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.813698] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.815872] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.817904] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.819898] usb usb2: Product: xHCI Host Controller [ 4.821850] usb usb2: Manufacturer: Linux 4.8.0-rc3+ xhci-hcd [ 4.823857] usb usb2: SerialNumber: 0000:00:14.0 [ 4.826320] hub 2-0:1.0: USB hub found [ 4.828277] hub 2-0:1.0: 6 ports detected [ 4.839606] random: fast init done [ 5.142236] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 5.293655] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610 [ 5.304415] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.312616] usb 1-3: Product: USB2.0 Hub [ 5.322709] hub 1-3:1.0: USB hub found [ 5.328125] hub 1-3:1.0: 4 ports detected [ 5.410387] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 5.441406] usb 2-2: New USB device found, idVendor=0951, idProduct=16ae [ 5.452245] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.459335] usb 2-2: Product: DT microDuo 3C [ 5.466206] usb 2-2: Manufacturer: Kingston [ 5.470316] usb 2-2: SerialNumber: B8AEEDBAF129B0314000013F [ 5.500812] SCSI subsystem initialized [ 5.510199] usb-storage 2-2:1.0: USB Mass Storage device detected [ 5.514138] scsi host0: usb-storage 2-2:1.0 [ 5.517688] scsi host0: runtime PM trying to activate child device host0 but parent (2-2:1.0) is not active [ 5.521438] usbcore: registered new interface driver usb-storage [ 5.525388] usbcore: registered new interface driver uas [ 5.658220] usb 1-3.3: new full-speed USB device number 3 using xhci_hcd [ 5.798710] usb 1-3.3: New USB device found, idVendor=0b05, idProduct=1807 [ 5.809650] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.820497] usb 1-3.3: Product: ASUS HID Device [ 5.826400] usb 1-3.3: Manufacturer: ASUS Tech Inc. [ 5.888836] usbcore: registered new interface driver usbhid [ 5.899456] usbhid: USB HID core driver [ 5.917660] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:0B05:1807.0001/input/input0 [ 5.983542] hid-generic 0003:0B05:1807.0001: input,hidraw0: USB HID v1.10 Keyboard [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-3.3/input0 [ 5.996161] hid-generic 0003:0B05:1807.0002: ignoring exceeding usage max [ 6.021504] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:0B05:1807.0002/input/input1 [ 6.096115] hid-generic 0003:0B05:1807.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-3.3/input1 [ 6.109875] input: ASUS Tech Inc. ASUS HID Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.2/0003:0B05:1807.0003/input/input2 [ 6.117472] hid-generic 0003:0B05:1807.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [ASUS Tech Inc. ASUS HID Device ] on usb-0000:00:14.0-3.3/input2 [ 6.541580] scsi 0:0:0:0: Direct-Access Kingston DT microDuo 3C PMAP PQ: 0 ANSI: 6 [ 6.585143] sd 0:0:0:0: [sda] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 6.601374] sd 0:0:0:0: [sda] Write Protect is off [ 6.609095] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 6.610142] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 6.636500] sda: sda1 sda2 [ 6.644296] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 7.259418] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.657981] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 7.667688] systemd[1]: Detected architecture x86-64. [ 7.687662] systemd[1]: Set hostname to . [ 7.953875] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.960491] systemd[1]: Reached target Encrypted Volumes. [ 7.966864] systemd[1]: Listening on udev Control Socket. [ 7.973226] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.979873] systemd[1]: Created slice System Slice. [ 7.986389] systemd[1]: Listening on udev Kernel Socket. [ 7.992881] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.277694] systemd-journald[778]: Received request to flush runtime journal from PID 1 [ 8.746005] [drm:drm_core_init] Initialized drm 1.1.0 20060810 [ 8.765713] proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002) [ 8.787365] ACPI: AC Adapter [ADP1] (off-line) [ 8.793563] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 8.797192] ACPI: Power Button [PWRB] [ 8.800671] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 8.803902] ACPI: Sleep Button [SLPB] [ 8.808694] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 [ 8.828454] ACPI: Lid Switch [LID] [ 8.831053] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 8.834417] ACPI: Power Button [PWRF] [ 8.897968] tpm tpm0: TPM self test failed [ 9.208087] intel_sst_acpi 808622A8:00: No matching machine driver found [ 9.231687] [drm:intel_detect_pch] No PCH found. [ 9.231693] [drm:get_allowed_dc_mask] Allowed DC state mask 00 [ 9.249832] [drm:intel_device_info_dump] i915 device info: gen=8, pciid=0x22b0 rev=0x20 flags=need_gfx_hws,is_cherryview,has_hotplug, [ 9.250102] [drm:intel_device_info_runtime_init] slice total: 1 [ 9.250104] [drm:intel_device_info_runtime_init] subslice total: 2 [ 9.250105] [drm:intel_device_info_runtime_init] subslice per slice: 2 [ 9.250106] [drm:intel_device_info_runtime_init] EU total: 12 [ 9.250107] [drm:intel_device_info_runtime_init] EU per subslice: 6 [ 9.250108] [drm:intel_device_info_runtime_init] has slice power gating: n [ 9.250109] [drm:intel_device_info_runtime_init] has subslice power gating: y [ 9.250110] [drm:intel_device_info_runtime_init] has EU power gating: y [ 9.250113] [drm:intel_sanitize_options] ppgtt mode: 2 [ 9.250114] [drm:intel_sanitize_options] use GPU sempahores? no [ 9.250139] [drm:i915_ggtt_probe_hw] Memory usable by graphics device = 2048M [ 9.250140] [drm:i915_ggtt_probe_hw] GMADR size = 256M [ 9.250141] [drm:i915_ggtt_probe_hw] GTT stolen size = 32M [ 9.250145] checking generic (80000000 3e8000) vs hw (80000000 10000000) [ 9.250146] fb: switching to inteldrmfb from simple [ 9.257173] Console: switching to colour dummy device 80x25 [ 9.257360] [drm:i915_kick_out_vgacon] Replacing VGA console driver [ 9.257419] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K [ 9.257590] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7ad9d000 [ 9.257614] [drm:intel_opregion_setup] Public ACPI methods supported [ 9.257616] [drm:intel_opregion_setup] ASLE supported [ 9.257619] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 9.257704] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.257716] [drm:drm_vblank_init] Driver supports precise vblank timestamp query. [ 9.257757] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz [ 9.257760] [drm:intel_bios_init] VBT signature "$VBT CHERRYVIEW ", BDB version 195 [ 9.257763] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 9.257764] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 9.257768] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19) [ 9.257771] [drm:parse_lfp_panel_data] Panel type: 0 (VBT) [ 9.257772] [drm:parse_lfp_panel_data] DRRS supported mode is seamless [ 9.258211] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 9.258216] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 0 75000 800 824 828 960 1280 1288 1292 1300 0x8 0xa [ 9.258218] [drm:parse_lfp_panel_data] VBT initial LVDS value 0 [ 9.258223] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 9.258225] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 9.258228] [drm:parse_driver_features] DRRS State Enabled:1 [ 9.258231] [drm:parse_mipi_config] Found MIPI Config block, panel index = 0 [ 9.258233] [drm:parse_mipi_sequence] Found MIPI sequence block v3 [ 9.258236] [drm:parse_mipi_sequence] MIPI related VBT parsing complete [ 9.258267] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 9.258285] [drm:intel_update_rawclk] rawclk rate: 200000 kHz [ 9.258303] [drm:chv_phy_control_init] Initial PHY_CONTROL=0x050007fc [ 9.258306] [drm:intel_power_well_enable] enabling always-on [ 9.258308] [drm:intel_power_well_enable] enabling display [ 9.258319] [drm:intel_power_well_enable] enabling dpio-common-bc [ 9.265922] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY0 (PHY_CONTROL=0x050007fd) [ 9.268730] [drm:intel_power_well_enable] enabling dpio-common-d [ 9.269955] ACPI: Battery Slot [BATC] (battery present) [ 9.276926] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007ff) [ 9.279608] [drm:intel_fbc_init] Sanitized enable_fbc value: 0 [ 9.279612] [drm:intel_modeset_init] 3 display pipes available. [ 9.279657] [drm:intel_update_czclk] CZ clock rate: 320000 kHz [ 9.279663] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 9.279666] [drm:intel_update_max_cdclk] Max CD clock rate: 320000 kHz [ 9.279667] [drm:intel_update_max_cdclk] Max dotclock rate: 304000 kHz [ 9.279673] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.280522] [drm:intel_dp_init_connector] Adding DP connector on port D [ 9.280569] [drm:intel_hdmi_init_connector] Adding HDMI connector on port D [ 9.280586] [drm:intel_dsi_init] [ 9.280593] [drm:vbt_panel_init] [ 9.280595] [drm:vbt_panel_init] Eot enabled [ 9.280596] [drm:vbt_panel_init] Clockstop disabled [ 9.280597] [drm:vbt_panel_init] Mode video [ 9.280598] [drm:vbt_panel_init] Dual link: NONE [ 9.280600] [drm:vbt_panel_init] Pixel Format 0 [ 9.280601] [drm:vbt_panel_init] TLPX 0 [ 9.280602] [drm:vbt_panel_init] LP RX Timeout 0xffff [ 9.280603] [drm:vbt_panel_init] Turnaround Timeout 0x14 [ 9.280604] [drm:vbt_panel_init] Init Count 0x7d0 [ 9.280606] [drm:vbt_panel_init] HS to LP Count 0x21 [ 9.280607] [drm:vbt_panel_init] LP Byte Clock 3 [ 9.280608] [drm:vbt_panel_init] DBI BW Timer 0x0 [ 9.280609] [drm:vbt_panel_init] LP to HS Clock Count 0x21 [ 9.280610] [drm:vbt_panel_init] HS to LP Clock Count 0xe [ 9.280612] [drm:vbt_panel_init] BTA disabled [ 9.280893] [drm:pwm_setup_backlight] *ERROR* Failed to own the pwm chip [ 9.280907] [drm:intel_panel_setup_backlight] failed to setup backlight for connector DSI-1 [ 9.280931] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 9.280935] [drm:intel_modeset_readout_hw_state] [CRTC:31:pipe B] hw state readout: disabled [ 9.280939] [drm:intel_modeset_readout_hw_state] [CRTC:36:pipe C] hw state readout: disabled [ 9.280944] [drm:intel_modeset_readout_hw_state] [ENCODER:39:DP D] hw state readout: disabled, pipe A [ 9.280947] [drm:intel_modeset_readout_hw_state] [ENCODER:43:HDMI D] hw state readout: disabled, pipe A [ 9.280949] [drm:intel_dsi_get_hw_state] [ 9.280953] [drm:intel_dsi_get_config] [ 9.280954] [drm:vlv_dsi_get_pclk] [ 9.280968] [drm:intel_modeset_readout_hw_state] [ENCODER:46:DSI A] hw state readout: enabled, pipe A [ 9.280972] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:DP-1] hw state readout: disabled [ 9.280975] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:HDMI-A-1] hw state readout: disabled [ 9.280976] [drm:intel_dsi_get_hw_state] [ 9.280979] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DSI-1] hw state readout: enabled [ 9.281001] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff97aab7e63000 for pipe A [ 9.281002] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9.281004] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 9.281006] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.281008] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.281010] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.281011] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.281012] [drm:intel_dump_pipe_config] requested mode: [ 9.281016] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 60 75000 800 824 828 960 1280 1288 1292 1300 0x40 0x0 [ 9.281017] [drm:intel_dump_pipe_config] adjusted mode: [ 9.281020] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 60 75000 800 824 828 960 1280 1288 1292 1300 0x40 0x0 [ 9.281023] [drm:intel_dump_crtc_timings] crtc timings: 75000 800 824 828 960 1280 1288 1292 1300, type: 0x40 flags: 0x0 [ 9.281024] [drm:intel_dump_pipe_config] port clock: 75000 [ 9.281025] [drm:intel_dump_pipe_config] pipe src size: 800x1280 [ 9.281027] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9.281029] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.281030] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.281032] [drm:intel_dump_pipe_config] ips: 0 [ 9.281033] [drm:intel_dump_pipe_config] double wide: 0 [ 9.281035] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x30002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 9.281036] [drm:intel_dump_pipe_config] planes on this crtc [ 9.281038] [drm:intel_dump_pipe_config] [PLANE:23:primary A] disabled, scaler_id = 0 [ 9.281040] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 9.281041] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 9.281043] [drm:intel_dump_pipe_config] [PLANE:28:sprite B] disabled, scaler_id = 0 [ 9.281046] [drm:intel_dump_pipe_config] [CRTC:31:pipe B][setup_hw_state] config ffff97aab7d3a000 for pipe B [ 9.281047] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 9.281049] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 9.281051] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.281053] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.281055] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.281056] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.281057] [drm:intel_dump_pipe_config] requested mode: [ 9.281060] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.281061] [drm:intel_dump_pipe_config] adjusted mode: [ 9.281063] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.281066] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 9.281067] [drm:intel_dump_pipe_config] port clock: 0 [ 9.281068] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 9.281070] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9.281071] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.281073] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.281074] [drm:intel_dump_pipe_config] ips: 0 [ 9.281075] [drm:intel_dump_pipe_config] double wide: 0 [ 9.281077] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9.281078] [drm:intel_dump_pipe_config] planes on this crtc [ 9.281080] [drm:intel_dump_pipe_config] [PLANE:29:primary B] disabled, scaler_id = 0 [ 9.281082] [drm:intel_dump_pipe_config] [PLANE:30:cursor B] disabled, scaler_id = 0 [ 9.281083] [drm:intel_dump_pipe_config] [PLANE:32:sprite C] disabled, scaler_id = 0 [ 9.281085] [drm:intel_dump_pipe_config] [PLANE:33:sprite D] disabled, scaler_id = 0 [ 9.281088] [drm:intel_dump_pipe_config] [CRTC:36:pipe C][setup_hw_state] config ffff97aab7633000 for pipe C [ 9.281090] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 9.281091] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 9.281093] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.281095] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.281097] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.281098] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.281099] [drm:intel_dump_pipe_config] requested mode: [ 9.281102] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.281103] [drm:intel_dump_pipe_config] adjusted mode: [ 9.281106] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.281108] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 9.281109] [drm:intel_dump_pipe_config] port clock: 0 [ 9.281110] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 9.281112] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9.281114] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.281115] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.281116] [drm:intel_dump_pipe_config] ips: 0 [ 9.281117] [drm:intel_dump_pipe_config] double wide: 0 [ 9.281119] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 [ 9.281120] [drm:intel_dump_pipe_config] planes on this crtc [ 9.281122] [drm:intel_dump_pipe_config] [PLANE:34:primary C] disabled, scaler_id = 0 [ 9.281123] [drm:intel_dump_pipe_config] [PLANE:35:cursor C] disabled, scaler_id = 0 [ 9.281125] [drm:intel_dump_pipe_config] [PLANE:37:sprite E] disabled, scaler_id = 0 [ 9.281127] [drm:intel_dump_pipe_config] [PLANE:38:sprite F] disabled, scaler_id = 0 [ 9.281136] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256 [ 9.281139] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128 [ 9.281142] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127 [ 9.281145] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256 [ 9.281148] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128 [ 9.281151] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127 [ 9.281154] [drm:vlv_get_fifo_size] Pipe C primary C FIFO size: 256 [ 9.281157] [drm:vlv_get_fifo_size] Pipe C sprite E FIFO size: 128 [ 9.281160] [drm:vlv_get_fifo_size] Pipe C sprite F FIFO size: 127 [ 9.291162] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 9.291166] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 9.291168] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe C, plane=15, cursor=15, sprite0=15, sprite1=15 [ 9.291170] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 9.291181] [drm:intel_power_well_disable] disabling dpio-common-d [ 9.293233] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fd) [ 9.293252] [drm:intel_power_well_disable] disabling dpio-common-bc [ 9.295542] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY0 (PHY_CONTROL=0x050007fc) [ 9.295580] [drm:i9xx_get_initial_plane_config] pipe/plane A/0 with fb: size=800x1280@32, offset=0, pitch 3200, size 0x3e8000 [ 9.295583] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=3e8000 [ 9.295589] [drm:i915_pages_create_for_stolen] offset=0x0, size=4096000 [ 9.295600] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff97aab54b37c0 [ 9.295609] [drm:i915_gem_init_ggtt] clearing unused GTT space: [3e8000, 7ffff000] [ 9.295933] [drm:i915_gem_context_init] LR context support initialized [ 9.295941] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000 [ 9.295946] [drm:i915_pages_create_for_stolen] offset=0x3e8000, size=4096 [ 9.297484] [drm:intel_engine_create_scratch] render ring pipe control offset: 0x7fffe000 [ 9.299470] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 9.299479] [drm:i915_pages_create_for_stolen] offset=0x3e9000, size=16384 [ 9.300090] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 9.300100] [drm:i915_pages_create_for_stolen] offset=0x3ed000, size=16384 [ 9.300464] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 9.300473] [drm:i915_pages_create_for_stolen] offset=0x3f1000, size=16384 [ 9.300828] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 9.300835] [drm:i915_pages_create_for_stolen] offset=0x3f5000, size=16384 [ 9.301195] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 9.301202] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 9.301208] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 9.301212] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 9.301215] [drm:intel_guc_setup] GuC fw status: path (null), fetch NONE, load NONE [ 9.301228] [drm:cherryview_setup_pctx] PCBR: 0x7ecf8001 [ 9.301238] [drm:vlv_init_gpll_ref_freq] GPLL reference freq: 40000 kHz [ 9.301244] [drm:cherryview_init_gt_powersave] DDR speed: 1600 MHz [ 9.301250] [drm:cherryview_init_gt_powersave] max GPU freq: 600 MHz (60) [ 9.301255] [drm:cherryview_init_gt_powersave] RPe GPU freq: 400 MHz (40) [ 9.301260] [drm:cherryview_init_gt_powersave] RP1(Guar) GPU freq: 400 MHz (40) [ 9.301261] [drm:cherryview_init_gt_powersave] min GPU freq: 400 MHz (40) [ 9.301272] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz [ 9.301291] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 9.301293] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 9.301295] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 9.301296] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 9.301299] [drm:intel_fbdev_init_bios] pipe A area: 800x1280, bpp: 32, size: 4096000 [ 9.301301] [drm:intel_fbdev_init_bios] fb big enough for plane A (4096000 >= 4096000) [ 9.301303] [drm:intel_fbdev_init_bios] pipe B not active, skipping [ 9.301305] [drm:intel_fbdev_init_bios] pipe C not active, skipping [ 9.301306] [drm:intel_fbdev_init_bios] using BIOS fb for initial console [ 9.301416] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 9.301421] [drm:intel_power_well_enable] enabling dpio-common-d [ 9.302921] [drm:intel_dp_connector_register] registering DPDDC-D bus for card0-DP-1 [ 9.303910] [drm:intel_didl_outputs] 9 outputs detected [ 9.307325] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.310771] acpi device:01: registered as cooling_device4 [ 9.311366] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007fe) [ 9.311873] acpi device:02: registered as cooling_device5 [ 9.314033] [drm:intel_power_well_disable] disabling dpio-common-d [ 9.314380] wmi: Mapper loaded [ 9.315006] acpi device:03: registered as cooling_device6 [ 9.316094] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fc) [ 9.316116] [drm:drm_helper_hpd_irq_event] [CONNECTOR:40:DP-1] status updated from unknown to disconnected [ 9.316120] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 9.316134] acpi device:04: registered as cooling_device7 [ 9.319323] acpi device:05: registered as cooling_device8 [ 9.323161] acpi device:06: registered as cooling_device9 [ 9.324537] acpi device:07: registered as cooling_device10 [ 9.325585] acpi device:08: registered as cooling_device11 [ 9.327282] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 9.327461] [drm:i915_driver_load] Initialized i915 1.6.0 20160822 for 0000:00:02.0 on minor 0 [ 9.355978] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 9.364468] EFI Variables Facility v0.08 2004-May-17 [ 9.375772] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 9.384884] pstore: using zlib compression [ 9.384927] pstore: Registered efi as persistent store backend [ 9.414130] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels [ 9.419163] Error: Driver 'pcspkr' is already registered, aborting... [ 9.464411] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.473771] [drm:intel_hdmi_detect] HDMI live status down [ 9.473781] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:HDMI-A-1] status updated from unknown to disconnected [ 9.473821] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] [ 9.473825] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 9.473831] [drm:intel_power_well_enable] enabling dpio-common-d [ 9.479814] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007fe) [ 9.482646] [drm:intel_power_well_disable] disabling dpio-common-d [ 9.484702] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fc) [ 9.484726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] disconnected [ 9.484730] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:HDMI-A-1] [ 9.484732] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 9.492408] SSE version of gcm_enc/dec engaged. [ 9.641769] [drm:intel_hdmi_detect] HDMI live status down [ 9.641779] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:HDMI-A-1] disconnected [ 9.641784] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DSI-1] [ 9.641786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DSI-1] status updated from unknown to connected [ 9.641794] [drm:intel_dsi_get_modes] [ 9.641802] [drm:intel_dsi_mode_valid] [ 9.641805] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DSI-1] probed modes : [ 9.641811] [drm:drm_mode_debug_printmodeline] Modeline 48:"800x1280" 60 75000 800 824 828 960 1280 1288 1292 1300 0x8 0xa [ 9.641816] [drm:drm_setup_crtcs] [ 9.641819] [drm:drm_enable_connectors] connector 40 enabled? no [ 9.641821] [drm:drm_enable_connectors] connector 44 enabled? no [ 9.641822] [drm:drm_enable_connectors] connector 47 enabled? yes [ 9.641826] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 9.641827] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 9.641830] [drm:intel_fb_initial_config] looking for cmdline mode on connector DSI-1 [ 9.641832] [drm:intel_fb_initial_config] looking for preferred mode on connector DSI-1 0 [ 9.641834] [drm:intel_fb_initial_config] connector DSI-1 on [CRTC:26:pipe A]: 800x1280 [ 9.641837] [drm:drm_setup_crtcs] desired mode 800x1280 set on crtc 26 (0,0) [ 9.641840] [drm:intelfb_create] re-using BIOS fb [ 9.641854] [drm:intelfb_create] allocated 800x1280 fb: 0x00000000 [ 9.641955] [drm:drm_fb_helper_hotplug_event] [ 9.641957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] [ 9.641959] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 9.641963] [drm:intel_power_well_enable] enabling dpio-common-d [ 9.642077] fbcon: inteldrmfb (fb0) is primary device [ 9.651795] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007fe) [ 9.653752] [drm:intel_power_well_disable] disabling dpio-common-d [ 9.655463] intel_rapl: Found RAPL domain package [ 9.655466] intel_rapl: Found RAPL domain core [ 9.655807] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fc) [ 9.655828] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] disconnected [ 9.655833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:HDMI-A-1] [ 9.655836] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 9.695843] random: crng init done [ 9.714664] asus_wmi: ASUS WMI generic driver loaded [ 9.717396] asus_wmi: Initialization: 0x1 [ 9.717521] asus_wmi: BIOS WMI version: 7.9 [ 9.717626] asus_wmi: SFUN value: 0x37 [ 9.722889] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9 [ 9.726160] asus_wmi: Number of fans: 1 [ 9.818440] [drm:intel_hdmi_detect] HDMI live status down [ 9.818450] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:HDMI-A-1] disconnected [ 9.818456] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DSI-1] [ 9.818458] [drm:intel_dsi_get_modes] [ 9.818468] [drm:intel_dsi_mode_valid] [ 9.818471] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DSI-1] probed modes : [ 9.818478] [drm:drm_mode_debug_printmodeline] Modeline 48:"800x1280" 60 75000 800 824 828 960 1280 1288 1292 1300 0x8 0xa [ 9.818495] [drm:drm_setup_crtcs] [ 9.818499] [drm:drm_enable_connectors] connector 40 enabled? no [ 9.818501] [drm:drm_enable_connectors] connector 44 enabled? no [ 9.818503] [drm:drm_enable_connectors] connector 47 enabled? yes [ 9.818507] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 9.818509] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 9.818512] [drm:intel_fb_initial_config] looking for cmdline mode on connector DSI-1 [ 9.818514] [drm:intel_fb_initial_config] looking for preferred mode on connector DSI-1 0 [ 9.818518] [drm:intel_fb_initial_config] connector DSI-1 on [CRTC:26:pipe A]: 800x1280 [ 9.818521] [drm:drm_setup_crtcs] desired mode 800x1280 set on crtc 26 (0,0) [ 9.818572] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DSI-1] checking for sink bpp constrains [ 9.818574] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 24 [ 9.818577] [drm:intel_dsi_compute_config] [ 9.818582] [drm:vlv_compute_dsi_pll] dsi pll div 000201e6, ctrl 80080100 [ 9.818585] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 24, dithering: 0 [ 9.818589] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff97aab7706800 for pipe A [ 9.818591] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9.818593] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 9.818596] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.818599] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.818602] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.818604] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.818605] [drm:intel_dump_pipe_config] requested mode: [ 9.818609] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 60 75000 800 824 828 960 1280 1288 1292 1300 0x8 0xa [ 9.818611] [drm:intel_dump_pipe_config] adjusted mode: [ 9.818615] [drm:drm_mode_debug_printmodeline] Modeline 0:"800x1280" 0 75000 800 824 828 960 1280 1288 1292 1300 0x8 0x0 [ 9.818619] [drm:intel_dump_crtc_timings] crtc timings: 75000 800 824 828 960 1280 1288 1292 1300, type: 0x8 flags: 0x0 [ 9.818620] [drm:intel_dump_pipe_config] port clock: 75000 [ 9.818622] [drm:intel_dump_pipe_config] pipe src size: 800x1280 [ 9.818624] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 9.818627] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.818629] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.818630] [drm:intel_dump_pipe_config] ips: 0 [ 9.818632] [drm:intel_dump_pipe_config] double wide: 0 [ 9.818635] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x30002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 9.818636] [drm:intel_dump_pipe_config] planes on this crtc [ 9.818644] [drm:intel_dump_pipe_config] [PLANE:23:primary A] enabled [ 9.818647] [drm:intel_dump_pipe_config] FB:52, fb = 800x1280 format = XR24 little-endian (0x34325258) [ 9.818647] [drm:intel_dump_pipe_config] scaler:0 src 0x0+800+1280 dst 0x0+800+1280 [ 9.818650] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 9.818652] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 9.818654] [drm:intel_dump_pipe_config] [PLANE:28:sprite B] disabled, scaler_id = 0 [ 9.818659] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667 [ 9.818691] [drm:intel_set_memory_cxsr] memory self-refresh is disabled [ 9.831021] [drm:intel_dsi_pre_disable] [ 9.850151] [drm:intel_disable_pipe] disabling pipe A [ 9.866004] [drm:intel_dsi_post_disable] [ 9.866011] [drm:intel_dsi_disable] [ 9.874286] [drm:generic_exec_sequence] Starting MIPI sequence 4 - MIPI_SEQ_DISPLAY_OFF [ 10.044076] input: SIS0457:00 0457:113D as /devices/pci0000:00/808622C1:05/i2c-5/i2c-SIS0457:00/0018:0457:113D.0004/input/input10 [ 10.045174] hid-multitouch 0018:0457:113D.0004: input,hidraw3: I2C HID v1.00 Device [SIS0457:00 0457:113D] on i2c-SIS0457:00 [ 10.088978] [drm:intel_dsi_clear_device_ready] [ 10.102155] [drm:vlv_disable_dsi_pll] [ 10.102197] [drm:generic_exec_sequence] Starting MIPI sequence 5 - MIPI_SEQ_DEASSERT_RESET [ 10.794233] [drm:verify_encoder_state] [ENCODER:39:DP D] [ 10.794248] [drm:verify_encoder_state] [ENCODER:43:HDMI D] [ 10.794257] [drm:verify_encoder_state] [ENCODER:46:DSI A] [ 10.794268] [drm:intel_connector_verify_state] [CONNECTOR:40:DP-1] [ 10.794276] [drm:intel_connector_verify_state] [CONNECTOR:44:HDMI-A-1] [ 10.794311] [drm:intel_dsi_pre_enable] [ 10.794317] [drm:vlv_disable_dsi_pll] [ 10.794344] [drm:vlv_enable_dsi_pll] [ 10.796774] [drm:vlv_enable_dsi_pll] DSI PLL locked [ 10.796782] [drm:intel_dsi_prepare] pipe A [ 10.826917] [drm:cherryview_enable_rps] GPLL enabled? yes [ 10.826927] [drm:cherryview_enable_rps] GPU status: 0x00002810 [ 10.854305] [drm:vlv_dsi_device_ready] [ 10.866051] [drm:generic_exec_sequence] Starting MIPI sequence 1 - MIPI_SEQ_ASSERT_RESET [ 10.874366] [drm:generic_exec_sequence] MIPI sequence 2 - MIPI_SEQ_INIT_OTP not available [ 10.874380] [drm:intel_dsi_enable] [ 11.010328] [drm:generic_exec_sequence] Starting MIPI sequence 3 - MIPI_SEQ_DISPLAY_ON [ 11.225275] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511 [ 11.225302] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=361, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=2 cxsr=0 [ 11.227695] [drm:intel_enable_pipe] enabling pipe A [ 11.227747] [drm:intel_dsi_enable_nop] [ 11.282032] ------------[ cut here ]------------ [ 11.282318] WARNING: CPU: 3 PID: 779 at /mnt/disk1/pavel/T100/drm-intel/drm-intel/drivers/gpu/drm/i915/intel_display.c:14162 intel_atomic_commit_tail+0x111d/0x1130 [i915] [ 11.282324] pipe A vblank wait timed out [ 11.282580] Modules linked in: asus_nb_wmi(E) asus_wmi(E) sparse_keymap(E) rfkill(E) hid_multitouch(E) intel_rapl(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) aesni_intel(E) aes_x86_64(E) lrw(E) gf128mul(E) glue_helper(E) ablk_helper(E) sg(E) joydev(E) cryptd(E) evdev(E) efi_pstore(E) efivars(E) pcspkr(E) wmi(E) battery(E) snd_soc_rt5645(E) snd_soc_rt5640(E) snd_soc_rl6231(E) dw_dmac(E) dw_dmac_core(E) i915(E) tpm_crb(E) video(E) snd_intel_sst_acpi(E) snd_intel_sst_core(E) snd_soc_sst_mfld_platform(E) snd_soc_sst_match(E) snd_soc_core(E) snd_compress(E) snd_pcm_dmaengine(E) soc_button_array(E) snd_pcm(E) tpm_tis(E) button(E) snd_timer(E) ac(E) acpi_pad(E) int3403_thermal(E) int3400_thermal(E) acpi_thermal_rel(E) drm_kms_helper(E) [ 11.282746] drm(E) processor_thermal_device(E) int340x_thermal_zone(E) lpc_ich(E) intel_soc_dts_iosf(E) tpm_tis_core(E) mfd_core(E) i2c_algo_bit(E) tpm(E) snd(E) soundcore(E) i2c_designware_platform(E) i2c_designware_core(E) efivarfs(E) autofs4(E) ext4(E) crc16(E) jbd2(E) mbcache(E) sd_mod(E) hid_generic(E) usbhid(E) uas(E) usb_storage(E) scsi_mod(E) mmc_block(E) crc32c_intel(E) xhci_pci(E) xhci_hcd(E) usbcore(E) usb_common(E) thermal(E) i2c_hid(E) hid(E) fjes(E) sdhci_acpi(E) sdhci(E) mmc_core(E) [ 11.282766] CPU: 3 PID: 779 Comm: kworker/3:3 Tainted: G E 4.8.0-rc3+ #1 [ 11.282772] Hardware name: ASUSTeK COMPUTER INC. T100HAN/T100HAN, BIOS T100HAN.216 12/31/2015 [ 11.282826] Workqueue: events output_poll_execute [drm_kms_helper] [ 11.282848] 0000000000000286 00000000e29a8ed1 ffffffffa431eb85 ffff97aab5a5bb58 [ 11.282859] 0000000000000000 ffffffffa407ab3e 0000000000000000 ffff97aab5a5bbb0 [ 11.282870] ffff97aab7eb0000 0000000000000000 0000000000000000 ffff97aab9334000 [ 11.282874] Call Trace: [ 11.282900] [] ? dump_stack+0x5c/0x77 [ 11.282916] [] ? __warn+0xbe/0xe0 [ 11.282929] [] ? warn_slowpath_fmt+0x5f/0x80 [ 11.282943] [] ? finish_wait+0x3e/0x70 [ 11.283174] [] ? intel_atomic_commit_tail+0x111d/0x1130 [i915] [ 11.283185] [] ? wake_atomic_t_function+0x60/0x60 [ 11.283417] [] ? intel_atomic_commit+0x3fb/0x560 [i915] [ 11.283470] [] ? restore_fbdev_mode+0x14c/0x260 [drm_kms_helper] [ 11.283520] [] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [drm_kms_helper] [ 11.283571] [] ? drm_fb_helper_set_par+0x29/0x60 [drm_kms_helper] [ 11.283619] [] ? drm_fb_helper_hotplug_event+0x152/0x170 [drm_kms_helper] [ 11.283662] [] ? output_poll_execute+0x1ae/0x1f0 [drm_kms_helper] [ 11.283675] [] ? process_one_work+0x160/0x410 [ 11.283686] [] ? worker_thread+0x4d/0x480 [ 11.283702] [] ? __schedule+0x1ed/0x6b0 [ 11.283710] [] ? process_one_work+0x410/0x410 [ 11.283723] [] ? kthread+0xcd/0xf0 [ 11.283735] [] ? ret_from_fork+0x1f/0x40 [ 11.283745] [] ? kthread_create_on_node+0x190/0x190 [ 11.283751] ---[ end trace 2e6641762d7c6f3a ]--- [ 11.283783] [drm:intel_connector_verify_state] [CONNECTOR:47:DSI-1] [ 11.283791] [drm:intel_dsi_get_hw_state] [ 11.283826] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 11.283853] [drm:intel_dsi_get_hw_state] [ 11.283864] [drm:intel_dsi_get_config] [ 11.283870] [drm:vlv_dsi_get_pclk] [ 21.481708] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:26:pipe A] flip_done timed out [ 21.481796] [drm:drm_fb_helper_hotplug_event] [ 21.481808] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] [ 21.481816] [drm:intel_dp_detect] [CONNECTOR:40:DP-1] [ 21.481832] [drm:intel_power_well_enable] enabling dpio-common-d [ 21.486868] [drm:chv_dpio_cmn_power_well_enable] Enabled DPIO PHY1 (PHY_CONTROL=0x050007fe) [ 21.489245] [drm:intel_power_well_disable] disabling dpio-common-d [ 21.489303] [drm:chv_dpio_cmn_power_well_disable] Disabled DPIO PHY1 (PHY_CONTROL=0x050007fc) [ 21.489407] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:40:DP-1] disconnected [ 21.489422] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:HDMI-A-1] [ 21.489428] [drm:intel_hdmi_detect] [CONNECTOR:44:HDMI-A-1] [ 21.649714] [drm:intel_hdmi_detect] HDMI live status down [ 21.649734] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:HDMI-A-1] disconnected [ 21.649749] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DSI-1] [ 21.649757] [drm:intel_dsi_get_modes] [ 21.649780] [drm:intel_dsi_mode_valid] [ 21.649790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DSI-1] probed modes : [ 21.649813] [drm:drm_mode_debug_printmodeline] Modeline 48:"800x1280" 60 75000 800 824 828 960 1280 1288 1292 1300 0x8 0xa [ 21.649851] [drm:drm_setup_crtcs] [ 21.649869] [drm:drm_enable_connectors] connector 40 enabled? no [ 21.649874] [drm:drm_enable_connectors] connector 44 enabled? no [ 21.649879] [drm:drm_enable_connectors] connector 47 enabled? yes [ 21.649892] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 21.649897] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 21.649909] [drm:intel_fb_initial_config] looking for cmdline mode on connector DSI-1 [ 21.649915] [drm:intel_fb_initial_config] looking for preferred mode on connector DSI-1 0 [ 21.649924] [drm:intel_fb_initial_config] connector DSI-1 on [CRTC:26:pipe A]: 800x1280 [ 21.649935] [drm:drm_setup_crtcs] desired mode 800x1280 set on crtc 26 (0,0) [ 31.721386] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:26:pipe A] flip_done timed out [ 31.722809] Console: switching to colour frame buffer device 160x50 [ 41.964831] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:26:pipe A] flip_done timed out [ 52.200979] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:26:pipe A] flip_done timed out [ 52.293894] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device