[ 0.000000] Linux version 4.8.0-rc3-00552-g9dc3273 (root@server2) (gcc version 6.1.1 20160802 (Debian 6.1.1-11) ) #1 SMP Sat Aug 27 16:15:21 CEST 2016 [ 0.000000] Command line: BOOT_IMAGE=Linux-drm-intel ro root=801 root=/dev/sda1 rootfstype=ext4 drm.debug=0x06 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bc673fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc674000-0x00000000bc6a2fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bc6a3000-0x00000000be1b4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be1b5000-0x00000000be1b5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be1b6000-0x00000000be1cffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be1d0000-0x00000000c2e1cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c2e1d000-0x00000000c44e3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c44e4000-0x00000000c44f1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c44f2000-0x00000000c46ecfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c46ed000-0x00000000c4e23fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c4e24000-0x00000000c53fefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c53ff000-0x00000000c53fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c5400000-0x00000000c7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000136ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: System manufacturer System Product Name/H110M-K, BIOS 1802 05/20/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x137000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00C8000000 mask 7FF8000000 uncachable [ 0.000000] 3 base 00C6000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00C5800000 mask 7FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xc5400 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcbc0-0x000fcbcf] mapped at [ffff8800000fcbc0] [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x01a39000, 0x01a39fff] PGTABLE [ 0.000000] BRK [0x01a3a000, 0x01a3afff] PGTABLE [ 0.000000] BRK [0x01a3b000, 0x01a3bfff] PGTABLE [ 0.000000] BRK [0x01a3c000, 0x01a3cfff] PGTABLE [ 0.000000] BRK [0x01a3d000, 0x01a3dfff] PGTABLE [ 0.000000] BRK [0x01a3e000, 0x01a3efff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BC6740A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BC697320 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BC6741E8 023134 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000C4E23F80 000040 [ 0.000000] ACPI: APIC 0x00000000BC697430 000068 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BC697498 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000BC6974E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BC697580 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BC6975C0 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x00000000BC6975F8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: LPIT 0x00000000BC697968 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000BC697A00 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BC697C48 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BC69A7F8 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BC69B3E0 0004A3 (v02 INTEL zpodd 00001000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x00000000BC69B888 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000BC69B8C0 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000BC69B918 000705 (v02 INTEL xh_rvp08 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BC69C020 005359 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000BC6A1380 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000BC6A13C8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000136ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bc673fff] [ 0.000000] node 0: [mem 0x00000000bc6a3000-0x00000000be1b4fff] [ 0.000000] node 0: [mem 0x00000000be1d0000-0x00000000c2e1cfff] [ 0.000000] node 0: [mem 0x00000000c44f2000-0x00000000c46ecfff] [ 0.000000] node 0: [mem 0x00000000c53ff000-0x00000000c53fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000136ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000136ffffff] [ 0.000000] On node 0 totalpages: 1023850 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10864 pages used for memmap [ 0.000000] DMA32 zone: 794575 pages, LIFO batch:31 [ 0.000000] Normal zone: 3080 pages used for memmap [ 0.000000] Normal zone: 225280 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000c6000000-0x00000000c7ffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc674000-0xbc6a2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe1b5000-0xbe1b5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe1b6000-0xbe1cffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc2e1d000-0xc44e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc44e4000-0xc44f1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc46ed000-0xc4e23fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4e24000-0xc53fefff] [ 0.000000] PM: Registered nosave memory: [mem 0xc5400000-0xc7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xc8000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff880136c00000 s99672 r8192 d31400 u1048576 [ 0.000000] pcpu-alloc: s99672 r8192 d31400 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1009829 [ 0.000000] Kernel command line: BOOT_IMAGE=Linux-drm-intel ro root=801 root=/dev/sda1 rootfstype=ext4 drm.debug=0x06 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3952856K/4095400K available (5153K kernel code, 672K rwdata, 1708K rodata, 900K init, 664K bss, 142544K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 3300.000 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.00 BogoMIPS (lpj=3312000) [ 0.000274] pid_max: default: 32768 minimum: 301 [ 0.000410] ACPI: Core revision 20160422 [ 0.018483] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210) [ 0.018960] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227) [ 0.019304] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160422/tbxfload-227) [ 0.025407] ACPI Error: 1 table load failures, 8 successful (20160422/tbxfload-247) [ 0.025740] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.025905] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026187] CPU: Physical Processor ID: 0 [ 0.026320] CPU: Processor Core ID: 0 [ 0.026455] mce: CPU supports 8 MCE banks [ 0.026594] CPU0: Thermal monitoring enabled (TM1) [ 0.026738] process: using mwait in idle threads [ 0.026900] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 [ 0.027035] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.027447] Freeing SMP alternatives memory: 24K (ffffffff8198b000 - ffffffff81991000) [ 0.027898] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.028036] smpboot: Max logical packages: 1 [ 0.030950] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.041091] TSC deadline timer enabled [ 0.041096] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.041546] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.042193] ... version: 4 [ 0.042325] ... bit width: 48 [ 0.042458] ... generic registers: 8 [ 0.043522] ... value mask: 0000ffffffffffff [ 0.043657] ... max period: 0000ffffffffffff [ 0.043792] ... fixed-purpose events: 3 [ 0.043924] ... event mask: 00000007000000ff [ 0.044191] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.044373] x86: Booting SMP configuration: [ 0.044506] .... node #0, CPUs: #1 [ 0.106675] x86: Booted up 1 node, 2 CPUs [ 0.106937] smpboot: Total of 2 processors activated (13251.24 BogoMIPS) [ 0.113264] devtmpfs: initialized [ 0.117218] PM: Registering ACPI NVS region [mem 0xbe1b5000-0xbe1b5fff] (4096 bytes) [ 0.117357] PM: Registering ACPI NVS region [mem 0xc46ed000-0xc4e23fff] (7565312 bytes) [ 0.117584] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.131280] NET: Registered protocol family 16 [ 0.135207] cpuidle: using governor ladder [ 0.139200] cpuidle: using governor menu [ 0.139375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.139514] ACPI: bus type PCI registered [ 0.139679] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.139861] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.140003] PCI: Using configuration type 1 for base access [ 0.156284] ACPI: Added _OSI(Module Device) [ 0.156445] ACPI: Added _OSI(Processor Device) [ 0.156579] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.156713] ACPI: Added _OSI(Processor Aggregator Device) [ 0.157646] ACPI: Executed 25 blocks of module-level executable AML code [ 0.164488] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.166854] ACPI: Dynamic OEM Table Load: [ 0.167166] ACPI: SSDT 0xFFFF880131E39800 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.168081] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.169228] ACPI: Dynamic OEM Table Load: [ 0.169541] ACPI: SSDT 0xFFFF880131D9D800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.170867] ACPI: Dynamic OEM Table Load: [ 0.171179] ACPI: SSDT 0xFFFF880131E39000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.172268] ACPI: Dynamic OEM Table Load: [ 0.172580] ACPI: SSDT 0xFFFF880131D53E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.174558] ACPI: Interpreter enabled [ 0.174715] ACPI: (supports S0 S3 S4 S5) [ 0.174848] ACPI: Using IOAPIC for interrupt routing [ 0.175007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.176649] ACPI: Power Resource [PG00] (on) [ 0.177055] ACPI: Power Resource [PG01] (on) [ 0.177432] ACPI: Power Resource [PG02] (on) [ 0.179221] ACPI: Power Resource [WRST] (on) [ 0.179614] ACPI: Power Resource [WRST] (on) [ 0.180006] ACPI: Power Resource [WRST] (on) [ 0.180396] ACPI: Power Resource [WRST] (on) [ 0.180787] ACPI: Power Resource [WRST] (on) [ 0.181177] ACPI: Power Resource [WRST] (on) [ 0.181568] ACPI: Power Resource [WRST] (on) [ 0.181959] ACPI: Power Resource [WRST] (on) [ 0.182348] ACPI: Power Resource [WRST] (on) [ 0.182736] ACPI: Power Resource [WRST] (on) [ 0.183126] ACPI: Power Resource [WRST] (on) [ 0.183516] ACPI: Power Resource [WRST] (on) [ 0.183911] ACPI: Power Resource [WRST] (on) [ 0.184300] ACPI: Power Resource [WRST] (on) [ 0.184689] ACPI: Power Resource [WRST] (on) [ 0.185082] ACPI: Power Resource [WRST] (on) [ 0.185471] ACPI: Power Resource [WRST] (on) [ 0.185863] ACPI: Power Resource [WRST] (on) [ 0.186252] ACPI: Power Resource [WRST] (on) [ 0.186642] ACPI: Power Resource [WRST] (on) [ 0.191937] ACPI: Power Resource [FN00] (off) [ 0.192129] ACPI: Power Resource [FN01] (off) [ 0.192319] ACPI: Power Resource [FN02] (off) [ 0.192509] ACPI: Power Resource [FN03] (off) [ 0.192699] ACPI: Power Resource [FN04] (off) [ 0.193643] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.193783] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.193946] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.194295] PCI host bridge to bus 0000:00 [ 0.194429] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.194567] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.194705] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.194844] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window] [ 0.194984] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.195124] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.195263] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000 [ 0.195482] pci 0000:00:02.0: [8086:1902] type 00 class 0x030000 [ 0.195488] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.195493] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.195496] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.195643] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.195659] pci 0000:00:14.0: reg 0x10: [mem 0xf7110000-0xf711ffff 64bit] [ 0.195720] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.195837] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.196026] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.196043] pci 0000:00:16.0: reg 0x10: [mem 0xf712d000-0xf712dfff 64bit] [ 0.196106] pci 0000:00:16.0: PME# supported from D3hot [ 0.196213] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.196226] pci 0000:00:17.0: reg 0x10: [mem 0xf7128000-0xf7129fff] [ 0.196232] pci 0000:00:17.0: reg 0x14: [mem 0xf712c000-0xf712c0ff] [ 0.196239] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.196245] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.196251] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.196257] pci 0000:00:17.0: reg 0x24: [mem 0xf712b000-0xf712b7ff] [ 0.196293] pci 0000:00:17.0: PME# supported from D3hot [ 0.196389] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400 [ 0.196441] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.196517] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.196696] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400 [ 0.196750] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.196824] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.196986] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 [ 0.197044] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.197119] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.197302] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100 [ 0.197479] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.197489] pci 0000:00:1f.2: reg 0x10: [mem 0xf7124000-0xf7127fff] [ 0.197621] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.197642] pci 0000:00:1f.3: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit] [ 0.197672] pci 0000:00:1f.3: reg 0x20: [mem 0xf7100000-0xf710ffff 64bit] [ 0.197717] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.197822] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.197988] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.198034] pci 0000:00:1f.4: reg 0x10: [mem 0xf712a000-0xf712a0ff 64bit] [ 0.198103] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.198281] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.198461] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.198478] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.198502] pci 0000:02:00.0: reg 0x18: [mem 0xf7004000-0xf7004fff 64bit] [ 0.198517] pci 0000:02:00.0: reg 0x20: [mem 0xf7000000-0xf7003fff 64bit] [ 0.198601] pci 0000:02:00.0: supports D1 D2 [ 0.198602] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.198627] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.202021] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 0.202183] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff] [ 0.202185] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff] [ 0.202224] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.202384] pci_bus 0000:00: on NUMA node 0 [ 0.203762] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.204912] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.206150] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.207387] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.208534] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.209771] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.211007] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.212244] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.213750] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.214119] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.214255] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.214396] vgaarb: loaded [ 0.214528] vgaarb: bridge control possible 0000:00:02.0 [ 0.218557] SCSI subsystem initialized [ 0.218712] libata version 3.00 loaded. [ 0.218714] ACPI: bus type USB registered [ 0.218861] usbcore: registered new interface driver usbfs [ 0.219001] usbcore: registered new interface driver hub [ 0.219142] usbcore: registered new device driver usb [ 0.219302] Advanced Linux Sound Architecture Driver Initialized. [ 0.219441] PCI: Using ACPI for IRQ routing [ 0.226246] PCI: pci_cache_line_size set to 64 bytes [ 0.226287] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] [ 0.226288] e820: reserve RAM buffer [mem 0xbc674000-0xbfffffff] [ 0.226289] e820: reserve RAM buffer [mem 0xbe1b5000-0xbfffffff] [ 0.226289] e820: reserve RAM buffer [mem 0xc2e1d000-0xc3ffffff] [ 0.226290] e820: reserve RAM buffer [mem 0xc46ed000-0xc7ffffff] [ 0.226290] e820: reserve RAM buffer [mem 0xc5400000-0xc7ffffff] [ 0.226291] e820: reserve RAM buffer [mem 0x137000000-0x137ffffff] [ 0.226412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.227351] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.229530] clocksource: Switched to clocksource hpet [ 0.231411] VFS: Disk quotas dquot_6.6.0 [ 0.235604] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.235777] pnp: PnP ACPI init [ 0.236079] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.236231] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.236473] pnp 00:01: [dma 0 disabled] [ 0.236500] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.236598] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.236668] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.236747] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.236899] system 00:04: [io 0xffff] has been reserved [ 0.237034] system 00:04: [io 0xffff] has been reserved [ 0.237170] system 00:04: [io 0xffff] has been reserved [ 0.237305] system 00:04: [io 0x1800-0x18fe] has been reserved [ 0.237441] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.237626] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.237681] system 00:05: [io 0x0800-0x087f] has been reserved [ 0.237833] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.237847] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.237869] system 00:07: [io 0x1854-0x1857] has been reserved [ 0.238022] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.238186] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.238339] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.238477] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.238653] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.238791] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.238929] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.239067] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.239204] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.239342] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.239480] system 00:08: [mem 0xf7fc0000-0xf7fdffff] has been reserved [ 0.239657] system 00:08: [mem 0xc5400000-0xc7fffffe] has been reserved [ 0.239794] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.239820] system 00:09: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.239974] system 00:09: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.240112] system 00:09: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.240250] system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.240388] system 00:09: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.240562] system 00:09: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.240708] system 00:09: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.240846] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241029] system 00:0a: [io 0xfe00-0xfefe] has been reserved [ 0.241181] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.241930] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.242083] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.242221] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.242359] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.242937] pnp: PnP ACPI: found 12 devices [ 0.248350] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.248579] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.248581] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.248581] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.248593] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.248594] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.248595] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.248597] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.248598] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.248598] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.248599] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.248600] pci 0000:00:1d.0: res[8]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.248601] pci 0000:00:1d.0: res[8]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.248601] pci 0000:00:1d.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.248602] pci 0000:00:1d.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.248603] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.248604] pci 0000:00:1c.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.248604] pci 0000:00:1d.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.248605] pci 0000:00:1d.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.248607] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc8000000-0xc81fffff] [ 0.248747] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc8200000-0xc83fffff 64bit pref] [ 0.248887] pci 0000:00:1d.0: BAR 8: assigned [mem 0xc8400000-0xc85fffff] [ 0.249026] pci 0000:00:1d.0: BAR 9: assigned [mem 0xc8600000-0xc87fffff 64bit pref] [ 0.249166] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.249302] pci 0000:00:1d.0: BAR 7: assigned [io 0x3000-0x3fff] [ 0.249440] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.249626] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.249769] pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xc81fffff] [ 0.249908] pci 0000:00:1c.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref] [ 0.250051] pci 0000:00:1c.7: PCI bridge to [bus 02] [ 0.250186] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff] [ 0.250325] pci 0000:00:1c.7: bridge window [mem 0xf7000000-0xf70fffff] [ 0.250467] pci 0000:00:1d.0: PCI bridge to [bus 03] [ 0.250642] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.250782] pci 0000:00:1d.0: bridge window [mem 0xc8400000-0xc85fffff] [ 0.250922] pci 0000:00:1d.0: bridge window [mem 0xc8600000-0xc87fffff 64bit pref] [ 0.251067] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.251068] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.251069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.251069] pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window] [ 0.251070] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.251071] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.251071] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xc81fffff] [ 0.251072] pci_bus 0000:01: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref] [ 0.251072] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.251073] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.251074] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.251074] pci_bus 0000:03: resource 1 [mem 0xc8400000-0xc85fffff] [ 0.251075] pci_bus 0000:03: resource 2 [mem 0xc8600000-0xc87fffff 64bit pref] [ 0.284556] NET: Registered protocol family 2 [ 0.292606] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.292772] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.292978] TCP: Hash tables configured (established 32768 bind 32768) [ 0.293126] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.293271] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.300610] NET: Registered protocol family 1 [ 0.300750] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.301177] PCI: CLS 0 bytes, default 64 [ 0.301184] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.302271] software IO TLB [mem 0xbee1d000-0xc2e1d000] (64MB) mapped at [ffff8800bee1d000-ffff8800c2e1cfff] [ 0.302495] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 0.302657] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 0.302792] RAPL PMU: hw unit of domain package 2^-14 Joules [ 0.302928] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 0.303063] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 0.303198] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 0.309664] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.309831] audit: initializing netlink subsys (disabled) [ 0.309973] audit: type=2000 audit(1472310389.306:1): initialized [ 0.310412] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.411601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.411757] io scheduler noop registered [ 0.411890] io scheduler deadline registered [ 0.412026] io scheduler cfq registered (default) [ 0.412456] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.433389] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.433969] Linux agpgart interface v0.103 [ 0.434124] [drm:drm_core_init] Initialized drm 1.1.0 20060810 [ 0.434386] ahci 0000:00:17.0: version 3.0 [ 0.444613] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 0.444754] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 0.453979] scsi host0: ahci [ 0.454204] scsi host1: ahci [ 0.454447] scsi host2: ahci [ 0.454721] scsi host3: ahci [ 0.454885] ata1: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b100 irq 120 [ 0.455033] ata2: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b180 irq 120 [ 0.455172] ata3: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b200 irq 120 [ 0.455312] ata4: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b280 irq 120 [ 0.455514] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.459019] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.459156] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.459309] hidraw: raw HID events driver (C) Jiri Kosina [ 0.459519] usbcore: registered new interface driver usbhid [ 0.459774] usbhid: USB HID core driver [ 0.459991] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 0.460188] NET: Registered protocol family 17 [ 0.460493] registered taskstats version 1 [ 0.461200] hctosys: unable to open rtc device (rtc0) [ 0.461374] PM: Hibernation image not present or could not be loaded. [ 0.461374] ALSA device list: [ 0.461505] No soundcards found. [ 0.498777] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.760194] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.761900] ata1.00: supports DRM functions and may not be fully accessible [ 0.762703] ata1.00: ATA-9: Samsung SSD 750 EVO 250GB, MAT01B6Q, max UDMA/133 [ 0.762842] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 0.763586] ata1.00: supports DRM functions and may not be fully accessible [ 0.764608] ata1.00: configured for UDMA/133 [ 0.768340] ata4: SATA link down (SStatus 4 SControl 300) [ 0.768591] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.769104] ata3: SATA link down (SStatus 4 SControl 300) [ 0.770144] ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133 [ 0.771623] ata2.00: configured for UDMA/133 [ 1.314601] tsc: Refined TSC clocksource calibration: 3312.000 MHz [ 1.314743] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd93f9e57, max_idle_ns: 440795263784 ns [ 2.338710] clocksource: Switched to clocksource tsc [ 3.490561] floppy0: no floppy controllers found [ 3.490858] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 750 1B6Q PQ: 0 ANSI: 5 [ 3.500653] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 3.500671] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.500955] sd 0:0:0:0: [sda] Write Protect is off [ 3.501096] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.501103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.501374] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5 [ 3.503309] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 3.503609] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.528869] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.529077] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.529261] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.529289] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.535683] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.535824] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 3.536365] Freeing unused kernel memory: 900K (ffffffff818aa000 - ffffffff8198b000) [ 3.536505] Write protecting the kernel read-only data: 8192k [ 3.536764] Freeing unused kernel memory: 968K (ffff88000150e000 - ffff880001600000) [ 3.537272] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000) [ 3.541360] random: fast init done [ 3.699849] Monitor-Mwait will be used to enter C-1 state [ 3.699852] Monitor-Mwait will be used to enter C-2 state [ 3.699853] Monitor-Mwait will be used to enter C-3 state [ 3.702387] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 3.702575] ACPI: Sleep Button [SLPB] [ 3.702730] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 3.702873] ACPI: Power Button [PWRB] [ 3.703031] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 3.703170] ACPI: Power Button [PWRF] [ 3.705966] wmi: Mapper loaded [ 3.758365] rtc_cmos 00:06: RTC can wake from S4 [ 3.758889] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 3.759106] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.851762] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.851899] ACPI: Thermal Zone [TZ00] (28 C) [ 3.852116] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.852252] ACPI: Thermal Zone [TZ01] (30 C) [ 3.860406] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.860557] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.862029] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 3.862176] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.862314] hub 1-0:1.0: USB hub found [ 3.862503] hub 1-0:1.0: 10 ports detected [ 3.870044] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.870186] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.871694] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.871832] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.872057] hub 2-0:1.0: USB hub found [ 3.872195] hub 2-0:1.0: 4 ports detected [ 3.874479] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffc90000020000, d0:17:c2:9a:a3:a8, XID 14100800 IRQ 122 [ 3.874685] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.878176] [drm:intel_detect_pch] Found SunrisePoint PCH [ 3.878178] [drm:get_allowed_dc_mask] Allowed DC state mask 03 [ 3.880555] [drm:intel_device_info_dump] i915 device info: gen=9, pciid=0x1902 rev=0x06 flags=need_gfx_hws,is_skylake,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 3.880576] [drm:intel_device_info_runtime_init] slice total: 1 [ 3.880577] [drm:intel_device_info_runtime_init] subslice total: 2 [ 3.880577] [drm:intel_device_info_runtime_init] subslice per slice: 2 [ 3.880578] [drm:intel_device_info_runtime_init] EU total: 12 [ 3.880578] [drm:intel_device_info_runtime_init] EU per subslice: 6 [ 3.880579] [drm:intel_device_info_runtime_init] has slice power gating: n [ 3.880579] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 3.880580] [drm:intel_device_info_runtime_init] has EU power gating: y [ 3.880580] [drm:intel_sanitize_options] ppgtt mode: 3 [ 3.880581] [drm:intel_sanitize_options] use GPU sempahores? no [ 3.880587] [drm:i915_ggtt_probe_hw] Memory usable by graphics device = 4096M [ 3.880727] [drm:i915_ggtt_probe_hw] GMADR size = 256M [ 3.880727] [drm:i915_ggtt_probe_hw] GTT stolen size = 32M [ 3.880728] [drm:i915_kick_out_vgacon] Replacing VGA console driver [ 3.881579] Console: switching to colour dummy device 80x25 [ 3.881733] [drm:i915_stolen_to_physical] *ERROR* conflict detected with stolen region: [0xc6000000 - 0xc8000000] [ 3.881741] [drm:intel_opregion_setup] graphic opregion physical addr: 0xc4e0e018 [ 3.881745] [drm:intel_opregion_setup] Public ACPI methods supported [ 3.881746] [drm:intel_opregion_setup] SWSCI supported [ 3.887553] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 3.887553] [drm:intel_opregion_setup] ASLE supported [ 3.887554] [drm:intel_opregion_setup] ASLE extension supported [ 3.887555] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 3.887587] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.887590] [drm:drm_vblank_init] Driver supports precise vblank timestamp query. [ 3.887593] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 3.887593] [drm:intel_bios_init] VBT signature "$VBT SKYLAKE ", BDB version 200 [ 3.887594] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 3.887595] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 3.889576] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0) [ 3.889577] [drm:parse_lfp_panel_data] Panel type: 2 (VBT) [ 3.889578] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 3.889580] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 3.889581] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 3.889582] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 3.889583] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 3.889584] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping. [ 3.889585] [drm:parse_device_mapping] Expected child device config size for VBT version 200 not known; assuming 38 [ 3.889585] [drm:parse_driver_features] DRRS State Enabled:0 [ 3.889587] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 3.889587] [drm:parse_ddi_port] VBT HDMI level shift for port B: 4 [ 3.889588] [drm:parse_ddi_port] Port E VBT info: DP:1 HDMI:0 DVI:0 EDP:0 CRT:0 [ 3.889589] [drm:parse_ddi_port] VBT HDMI level shift for port E: 0 [ 3.889612] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 3.889620] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [ 3.889622] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 3.889624] [drm:intel_power_well_enable] enabling power well 1 [ 3.889627] [drm:intel_power_well_enable] enabling MISC IO power well [ 3.889629] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 3.889630] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz [ 3.889631] [drm:intel_update_max_cdclk] Max dotclock rate: 675000 kHz [ 3.889643] [drm:intel_power_well_enable] enabling always-on [ 3.889643] [drm:intel_power_well_enable] enabling DC off [ 3.889644] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 3.889646] [drm:intel_power_well_enable] enabling power well 2 [ 3.889647] [drm:intel_power_well_enable] enabling DDI A/E power well [ 3.889648] [drm:intel_power_well_enable] enabling DDI B power well [ 3.889649] [drm:skl_set_power_well] Enabling DDI B power well [ 3.889650] [drm:intel_power_well_enable] enabling DDI C power well [ 3.889650] [drm:skl_set_power_well] Enabling DDI C power well [ 3.889651] [drm:intel_power_well_enable] enabling DDI D power well [ 3.889652] [drm:skl_set_power_well] Enabling DDI D power well [ 3.889653] [drm:gen9_set_dc_state] Setting DC state from 00 to 00 [ 3.889659] [drm:intel_csr_ucode_init] Loading i915/skl_dmc_ver1_26.bin [ 3.889964] [drm:intel_fbc_init] Sanitized enable_fbc value: 0 [ 3.889968] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec) [ 3.889968] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec) [ 3.889969] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec) [ 3.889969] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec) [ 3.889970] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec) [ 3.889970] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec) [ 3.889971] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec) [ 3.889971] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec) [ 3.889972] [drm:intel_modeset_init] 2 display pipes available. [ 3.889979] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 3.889981] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.890288] [drm:intel_ddi_init] VBT says port A is not DVI/HDMI/DP compatible, respect it [ 3.890798] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 3.890819] [drm:intel_dp_init_connector] Adding DP connector on port E [ 3.890842] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 3.890844] [drm:intel_modeset_readout_hw_state] [CRTC:30:pipe B] hw state readout: disabled [ 3.890845] [drm:intel_modeset_readout_hw_state] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1 [ 3.890846] [drm:intel_modeset_readout_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 3.890847] [drm:intel_modeset_readout_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 3.890851] [drm:intel_modeset_readout_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0 [ 3.890853] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DDI B] hw state readout: disabled, pipe A [ 3.890856] [drm:intel_modeset_readout_hw_state] [ENCODER:37:DDI E] hw state readout: enabled, pipe A [ 3.890861] [drm:intel_modeset_readout_hw_state] [CONNECTOR:33:HDMI-A-1] hw state readout: disabled [ 3.890862] [drm:intel_modeset_readout_hw_state] [CONNECTOR:38:DP-1] hw state readout: enabled [ 3.890874] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff8801317ff000 for pipe A [ 3.890878] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3.890878] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.890879] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.890880] [drm:intel_dump_pipe_config] dp: 0, lanes: 2, gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64 [ 3.890881] [drm:intel_dump_pipe_config] dp: 0, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.890881] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.890881] [drm:intel_dump_pipe_config] requested mode: [ 3.890883] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 150 270000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.890887] [drm:intel_dump_pipe_config] adjusted mode: [ 3.890888] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 150 270000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 3.890889] [drm:intel_dump_crtc_timings] crtc timings: 270000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x40 flags: 0x5 [ 3.890889] [drm:intel_dump_pipe_config] port clock: 270000 [ 3.890890] [drm:intel_dump_pipe_config] pipe src size: 720x400 [ 3.890890] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 3.890891] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.890891] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05000400, enabled [ 3.890892] [drm:intel_dump_pipe_config] ips: 0 [ 3.890892] [drm:intel_dump_pipe_config] double wide: 0 [ 3.890893] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.890893] [drm:intel_dump_pipe_config] planes on this crtc [ 3.890894] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] disabled, scaler_id = -1 [ 3.890895] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 3.890895] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 3.890896] [drm:intel_dump_pipe_config] [CRTC:30:pipe B][setup_hw_state] config ffff88012f596000 for pipe B [ 3.890897] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.890897] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.890898] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.890898] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.890899] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.890899] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.890900] [drm:intel_dump_pipe_config] requested mode: [ 3.890901] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.890901] [drm:intel_dump_pipe_config] adjusted mode: [ 3.890902] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.890903] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.890903] [drm:intel_dump_pipe_config] port clock: 0 [ 3.890903] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.890904] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0 [ 3.890904] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.890905] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.890905] [drm:intel_dump_pipe_config] ips: 0 [ 3.890906] [drm:intel_dump_pipe_config] double wide: 0 [ 3.890906] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 [ 3.890907] [drm:intel_dump_pipe_config] planes on this crtc [ 3.890907] [drm:intel_dump_pipe_config] [PLANE:28:plane 1B] disabled, scaler_id = -1 [ 3.890908] [drm:intel_dump_pipe_config] [PLANE:29:cursor B] disabled, scaler_id = -1 [ 3.890908] [drm:intel_dump_pipe_config] [PLANE:31:plane 2B] disabled, scaler_id = -1 [ 3.890909] [drm:intel_modeset_setup_hw_state] DPLL 0 enabled but not in use, disabling [ 3.890925] [drm:i915_gem_init_ggtt] clearing unused GTT space: [0, fffff000] [ 3.890952] [drm:i915_gem_context_init] LR context support initialized [ 3.890961] [drm:intel_engine_create_scratch] render ring pipe control offset: 0xffffe000 [ 3.891836] [drm:intel_power_well_disable] disabling DDI D power well [ 3.891838] [drm:skl_set_power_well] Disabling DDI D power well [ 3.891839] [drm:intel_power_well_disable] disabling DDI C power well [ 3.891840] [drm:skl_set_power_well] Disabling DDI C power well [ 3.891841] [drm:intel_power_well_disable] disabling DDI B power well [ 3.891842] [drm:skl_set_power_well] Disabling DDI B power well [ 3.891843] [drm:csr_load_work_fn] Finished loading i915/skl_dmc_ver1_26.bin (v1.26) [ 3.891980] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 3.892031] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 3.892072] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 3.892110] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 3.892179] [drm:intel_guc_setup] GuC fw status: path i915/skl_guc_ver6_1.bin, fetch NONE, load NONE [ 3.892185] [drm:intel_guc_setup] GuC firmware load skipped [ 3.892192] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 3.892196] [drm:intel_fbdev_init_bios] pipe A not active or no fb, skipping [ 3.892197] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 3.892197] [drm:intel_fbdev_init_bios] no active fbs found, not using BIOS config [ 3.892277] [drm:intel_hdmi_detect] [CONNECTOR:33:HDMI-A-1] [ 3.893001] [drm:intel_dp_connector_register] registering DPDDC-E bus for card0-DP-1 [ 3.895877] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 3.898472] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.898688] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.898724] [drm:i915_driver_load] Initialized i915 1.6.0 20160822 for 0000:00:02.0 on minor 0 [ 3.906901] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 3.937217] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 3.947830] SSE version of gcm_enc/dec engaged. [ 3.991547] [drm:intel_hdmi_detect] HDMI live status down [ 3.991550] [drm:drm_helper_hpd_irq_event] [CONNECTOR:33:HDMI-A-1] status updated from unknown to disconnected [ 3.991551] [drm:intel_dp_detect] [CONNECTOR:38:DP-1] [ 3.992506] [drm:intel_dp_read_dpcd] DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00 [ 3.994282] [drm:intel_dp_long_pulse] Display Port TPS3 support: source yes, sink no [ 3.994283] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 3.994284] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 3.994285] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 3.995128] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 3.995973] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 3.999240] [drm:drm_dp_i2c_do_msg] native defer [ 4.000239] [drm:drm_dp_i2c_do_msg] native defer [ 4.001241] [drm:drm_dp_i2c_do_msg] native defer [ 4.002246] [drm:drm_dp_i2c_do_msg] native defer [ 4.003774] [drm:drm_dp_i2c_do_msg] native defer [ 4.004775] [drm:drm_dp_i2c_do_msg] native defer [ 4.005778] [drm:drm_dp_i2c_do_msg] native defer [ 4.006780] [drm:drm_dp_i2c_do_msg] native defer [ 4.008305] [drm:drm_dp_i2c_do_msg] native defer [ 4.009309] [drm:drm_dp_i2c_do_msg] native defer [ 4.010310] [drm:drm_dp_i2c_do_msg] native defer [ 4.011312] [drm:drm_dp_i2c_do_msg] native defer [ 4.012840] [drm:drm_dp_i2c_do_msg] native defer [ 4.013842] [drm:drm_dp_i2c_do_msg] native defer [ 4.014845] [drm:drm_dp_i2c_do_msg] native defer [ 4.015848] [drm:drm_dp_i2c_do_msg] native defer [ 4.017377] [drm:drm_dp_i2c_do_msg] native defer [ 4.018378] [drm:drm_dp_i2c_do_msg] native defer [ 4.019380] [drm:drm_dp_i2c_do_msg] native defer [ 4.020380] [drm:drm_dp_i2c_do_msg] native defer [ 4.021909] [drm:drm_dp_i2c_do_msg] native defer [ 4.022911] [drm:drm_dp_i2c_do_msg] native defer [ 4.023911] [drm:drm_dp_i2c_do_msg] native defer [ 4.024913] [drm:drm_dp_i2c_do_msg] native defer [ 4.026444] [drm:drm_dp_i2c_do_msg] native defer [ 4.027446] [drm:drm_dp_i2c_do_msg] native defer [ 4.028446] [drm:drm_dp_i2c_do_msg] native defer [ 4.029446] [drm:drm_dp_i2c_do_msg] native defer [ 4.030973] [drm:drm_dp_i2c_do_msg] native defer [ 4.031937] [drm:drm_dp_i2c_do_msg] native defer [ 4.032933] [drm:drm_dp_i2c_do_msg] native defer [ 4.033938] [drm:drm_dp_i2c_do_msg] native defer [ 4.036015] [drm:drm_helper_hpd_irq_event] [CONNECTOR:38:DP-1] status updated from unknown to connected [ 4.036028] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:HDMI-A-1] [ 4.036029] [drm:intel_hdmi_detect] [CONNECTOR:33:HDMI-A-1] [ 4.131623] [drm:intel_hdmi_detect] HDMI live status down [ 4.131628] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:HDMI-A-1] disconnected [ 4.131632] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:DP-1] [ 4.131633] [drm:intel_dp_detect] [CONNECTOR:38:DP-1] [ 4.132597] [drm:intel_dp_read_dpcd] DPCD: 11 0a 82 01 00 03 01 81 00 00 00 00 00 00 00 [ 4.134377] [drm:intel_dp_long_pulse] Display Port TPS3 support: source yes, sink no [ 4.134380] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 4.134382] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 4.134384] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 4.135229] [drm:intel_dp_probe_oui] Sink OUI: 00e04c [ 4.136073] [drm:intel_dp_probe_oui] Branch OUI: 00e04c [ 4.136960] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 4.136970] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:38:DP-1] probed modes : [ 4.136974] [drm:drm_mode_debug_printmodeline] Modeline 41:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4.136977] [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.136980] [drm:drm_mode_debug_printmodeline] Modeline 54:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 4.136983] [drm:drm_mode_debug_printmodeline] Modeline 44:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 4.136985] [drm:drm_mode_debug_printmodeline] Modeline 51:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.136988] [drm:drm_mode_debug_printmodeline] Modeline 52:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 4.136991] [drm:drm_mode_debug_printmodeline] Modeline 43:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.136993] [drm:drm_mode_debug_printmodeline] Modeline 45:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.136996] [drm:drm_mode_debug_printmodeline] Modeline 42:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.136998] [drm:drm_mode_debug_printmodeline] Modeline 47:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.137001] [drm:drm_mode_debug_printmodeline] Modeline 48:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.137004] [drm:drm_setup_crtcs] [ 4.137007] [drm:drm_enable_connectors] connector 33 enabled? no [ 4.137008] [drm:drm_enable_connectors] connector 38 enabled? yes [ 4.137011] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 4.137013] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1 [ 4.137015] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0 [ 4.137017] [drm:intel_fb_initial_config] connector DP-1 on [CRTC:26:pipe A]: 1280x1024 [ 4.137019] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 26 (0,0) [ 4.137021] [drm:intelfb_create] no BIOS fb, allocating a new one [ 4.137115] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.139236] [drm:intelfb_create] allocated 1280x1024 fb: 0x000c0000 [ 4.139455] fbcon: inteldrmfb (fb0) is primary device [ 4.139627] [drm:connected_sink_compute_bpp] [CONNECTOR:38:DP-1] checking for sink bpp constrains [ 4.139629] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 4.139633] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 108000KHz [ 4.139640] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 2 clock 162000 bpp 24 [ 4.139641] [drm:intel_dp_compute_config] DP link bw required 259200 available 259200 [ 4.139643] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 4.139646] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880131644800 for pipe A [ 4.139647] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 4.139648] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 4.139650] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 4.139652] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4194304, gmch_n: 4194304, link_m: 174762, link_n: 262144, tu: 64 [ 4.139654] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 4.139655] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 4.139656] [drm:intel_dump_pipe_config] requested mode: [ 4.139660] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4.139660] [drm:intel_dump_pipe_config] adjusted mode: [ 4.139663] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4.139665] [drm:intel_dump_crtc_timings] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5 [ 4.139666] [drm:intel_dump_pipe_config] port clock: 162000 [ 4.139667] [drm:intel_dump_pipe_config] pipe src size: 1280x1024 [ 4.139669] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0 [ 4.139671] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.139672] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.139673] [drm:intel_dump_pipe_config] ips: 0 [ 4.139674] [drm:intel_dump_pipe_config] double wide: 0 [ 4.139676] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0 [ 4.139676] [drm:intel_dump_pipe_config] planes on this crtc [ 4.139678] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] disabled, scaler_id = -1 [ 4.139679] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1 [ 4.139680] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1 [ 4.139684] [drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500 [ 4.139690] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 4.139694] [drm:intel_find_shared_dpll] [CRTC:26:pipe A] allocated DPLL 1 [ 4.139695] [drm:intel_reference_shared_dpll] using DPLL 1 for pipe A [ 4.139697] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31 [ 4.139699] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0 [ 4.139723] [drm:intel_disable_pipe] disabling pipe A [ 4.158025] [drm:intel_disable_shared_dpll] disable DPLL 1 (active 1, on? 1) for crtc 26 [ 4.158028] [drm:intel_disable_shared_dpll] disabling DPLL 1 [ 4.158032] [drm:skl_set_cdclk] Changing CDCLK to 337500 kHz (VCO 8100000 kHz) [ 4.158039] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz [ 4.158040] [drm:verify_encoder_state] [ENCODER:32:DDI B] [ 4.158042] [drm:verify_encoder_state] [ENCODER:37:DDI E] [ 4.158043] [drm:intel_connector_verify_state] [CONNECTOR:33:HDMI-A-1] [ 4.158044] [drm:verify_single_dpll_state] DPLL 0 [ 4.158046] [drm:verify_single_dpll_state] DPLL 1 [ 4.158047] [drm:verify_single_dpll_state] DPLL 2 [ 4.158048] [drm:verify_single_dpll_state] DPLL 3 [ 4.158051] [drm:intel_enable_shared_dpll] enable DPLL 1 (active 1, on? 0) for crtc 26 [ 4.158052] [drm:intel_enable_shared_dpll] enabling DPLL 1 [ 4.160129] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.160131] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.160132] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.160132] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.160133] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 4.160133] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.160134] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 4.160135] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 4.160136] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.161410] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 4.161411] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 4.161412] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 4.161413] [drm:_intel_dp_set_link_train] Using DP training pattern TPS1 [ 4.162806] [drm:intel_dp_link_training_clock_recovery] clock recovery OK [ 4.162808] [drm:_intel_dp_set_link_train] Using DP training pattern TPS2 [ 4.165574] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful [ 4.165988] [drm:skylake_pfit_enable] for crtc_state = ffff880131644800 [ 4.166233] [drm:intel_enable_pipe] enabling pipe A [ 4.174868] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 4.174901] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 4.174930] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 4.199735] [drm:intel_connector_verify_state] [CONNECTOR:38:DP-1] [ 4.199739] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 4.199750] [drm:verify_single_dpll_state] DPLL 1 [ 4.199752] [drm:skl_enable_sagv] Enabling the SAGV [ 4.199764] Console: switching to colour frame buffer device 160x64 [ 4.199782] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 4.220358] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.325146] Adding 1364988k swap on /dev/sda5. Priority:-1 extents:1 across:1364988k SS [ 4.331999] EXT4-fs (sda1): re-mounted. Opts: (null) [ 4.349450] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.495109] lp: driver loaded but no devices found [ 4.512771] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 4.514414] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 4.519577] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.534797] loop: module loaded [ 4.537076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.541347] usbcore: registered new interface driver usb-storage [ 4.543784] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 4.598678] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.602259] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 4.606044] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 4.822796] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2 [ 4.823350] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2) [ 4.829333] r8169 0000:02:00.0 eth0: link down [ 4.829335] r8169 0000:02:00.0 eth0: link down [ 5.730659] [drm:gen9_enable_rc6] RC6 on [ 6.501509] r8169 0000:02:00.0 eth0: link up [ 7.127607] RPC: Registered named UNIX socket transport module. [ 7.128228] RPC: Registered udp transport module. [ 7.128843] RPC: Registered tcp transport module. [ 7.129431] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.143901] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.272342] fuse init (API version 7.25) [ 7.302432] ttyS1: LSR safety check engaged! [ 7.303286] ttyS1: LSR safety check engaged! [ 7.397467] random: crng init done [ 7.500281] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.718918] Bluetooth: Core ver 2.21 [ 10.719632] NET: Registered protocol family 31 [ 10.720345] Bluetooth: HCI device and connection manager initialized [ 10.721062] Bluetooth: HCI socket layer initialized [ 10.722247] Bluetooth: L2CAP socket layer initialized [ 10.723261] Bluetooth: SCO socket layer initialized [ 10.729144] Netfilter messages via NETLINK v0.30. [ 12.171542] device eth0 entered promiscuous mode [ 17.432759] systemd-logind[5068]: New seat seat0. [ 17.433314] systemd-logind[5068]: Watching system buttons on /dev/input/event3 (Power Button) [ 17.433434] systemd-logind[5068]: Watching system buttons on /dev/input/event4 (Video Bus) [ 17.433515] systemd-logind[5068]: Watching system buttons on /dev/input/event2 (Power Button) [ 17.433607] systemd-logind[5068]: Watching system buttons on /dev/input/event1 (Sleep Button) [ 17.434789] systemd-logind[5068]: Failed to start user service, ignoring: Unknown unit: user@1000.service [ 17.442793] systemd-logind[5068]: New session 1 of user valerio. [ 18.950251] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0 [ 22.798239] systemd-logind[5068]: Failed to start user service, ignoring: Unknown unit: user@0.service [ 22.804486] systemd-logind[5068]: New session 2 of user root.