[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-01) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=225aeadd-eb7f-408a-bc22-46ea3c495b5c ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] tseg: 00bf800000 [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be1e3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000be1e4000-0x00000000be4e7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e8000-0x00000000be8d9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8da000-0x00000000bee2cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee2d000-0x00000000bee2dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2e000-0x00000000bf033fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf034000-0x00000000bf451fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf452000-0x00000000bf7f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme4, BIOS P2.80 08/05/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EAFFF uncachable [ 0.000000] EB000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000083f000000 aka 33776M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] total RAM covered: 3064M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3064MB, range: 8MB, type UC [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd9f0-0x000fd9ff] mapped at [ffff8800000fd9f0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE [ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE [ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE [ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE [ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE [ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x333dc000-0x359e5fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BE8C7068 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BE8D0078 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654) [ 0.000000] ACPI: DSDT 0x00000000BE8C7158 008F1C (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BE8D3080 000040 [ 0.000000] ACPI: APIC 0x00000000BE8D0188 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BE8D0228 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BE8D0270 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 0x00000000BE8D02B0 000062 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000BE8D0318 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x83eff5000-0x83eff9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000083effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000be1e3fff] [ 0.000000] node 0: [mem 0x00000000bee2d000-0x00000000bee2dfff] [ 0.000000] node 0: [mem 0x00000000bf034000-0x00000000bf451fff] [ 0.000000] node 0: [mem 0x00000000bf7f3000-0x00000000bf7fffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x000000083effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff] [ 0.000000] On node 0 totalpages: 8377772 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12121 pages used for memmap [ 0.000000] DMA32 zone: 775696 pages, LIFO batch:31 [ 0.000000] Normal zone: 118720 pages used for memmap [ 0.000000] Normal zone: 7598079 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe1e4000-0xbe4e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe4e8000-0xbe8d9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe8da000-0xbee2cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbee2e000-0xbf033fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf452000-0xbf7f2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88083ec00000 s98008 r8192 d28968 u262144 [ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8246846 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=225aeadd-eb7f-408a-bc22-46ea3c495b5c ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 32796360K/33511088K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 714728K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:1032 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4030.127 MHz processor [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 8060.25 BogoMIPS (lpj=16120508) [ 0.000026] pid_max: default: 32768 minimum: 301 [ 0.000031] ACPI: Core revision 20150930 [ 0.003366] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.003386] Security Framework initialized [ 0.003387] Yama: becoming mindful. [ 0.003402] AppArmor: AppArmor initialized [ 0.005285] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.013011] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.016441] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.016474] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.016854] Initializing cgroup subsys io [ 0.016858] Initializing cgroup subsys memory [ 0.016864] Initializing cgroup subsys devices [ 0.016866] Initializing cgroup subsys freezer [ 0.016869] Initializing cgroup subsys net_cls [ 0.016871] Initializing cgroup subsys perf_event [ 0.016873] Initializing cgroup subsys net_prio [ 0.016875] Initializing cgroup subsys hugetlb [ 0.016878] Initializing cgroup subsys pids [ 0.016895] CPU: Physical Processor ID: 0 [ 0.016896] CPU: Processor Core ID: 0 [ 0.016897] mce: CPU supports 7 MCE banks [ 0.016903] LVT offset 1 assigned for vector 0xf9 [ 0.016908] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.016909] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.017137] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000) [ 0.046316] ftrace: allocating 31996 entries in 125 pages [ 0.056960] smpboot: Max logical packages: 2 [ 0.056962] smpboot: APIC(10) Converting physical 1 to logical package 0 [ 0.057296] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.204127] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.204140] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.204144] ... version: 0 [ 0.204145] ... bit width: 48 [ 0.204146] ... generic registers: 6 [ 0.204147] ... value mask: 0000ffffffffffff [ 0.204148] ... max period: 00007fffffffffff [ 0.204148] ... fixed-purpose events: 0 [ 0.204149] ... event mask: 000000000000003f [ 0.204787] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.204849] x86: Booting SMP configuration: [ 0.204850] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.224609] x86: Booted up 1 node, 8 CPUs [ 0.224613] smpboot: Total of 8 processors activated (64482.03 BogoMIPS) [ 0.236653] devtmpfs: initialized [ 0.242209] evm: security.selinux [ 0.242211] evm: security.SMACK64 [ 0.242212] evm: security.SMACK64EXEC [ 0.242212] evm: security.SMACK64TRANSMUTE [ 0.242213] evm: security.SMACK64MMAP [ 0.242214] evm: security.ima [ 0.242215] evm: security.capability [ 0.242297] PM: Registering ACPI NVS region [mem 0xbe4e8000-0xbe8d9fff] (4136960 bytes) [ 0.242345] PM: Registering ACPI NVS region [mem 0xbee2e000-0xbf033fff] (2121728 bytes) [ 0.242446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.242533] pinctrl core: initialized pinctrl subsystem [ 0.242627] RTC time: 19:12:43, date: 09/19/16 [ 0.242726] NET: Registered protocol family 16 [ 0.252140] cpuidle: using governor ladder [ 0.264140] cpuidle: using governor menu [ 0.264144] PCCT header not found. [ 0.264222] ACPI: bus type PCI registered [ 0.264224] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.264286] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.264288] PCI: not using MMCONFIG [ 0.264289] PCI: Using configuration type 1 for base access [ 0.264290] PCI: Using configuration type 1 for extended access [ 0.276533] ACPI: Added _OSI(Module Device) [ 0.276534] ACPI: Added _OSI(Processor Device) [ 0.276536] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.276537] ACPI: Added _OSI(Processor Aggregator Device) [ 0.277901] ACPI: Executed 3 blocks of module-level executable AML code [ 0.280720] ACPI: Interpreter enabled [ 0.280729] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.280733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580) [ 0.280742] ACPI: (supports S0 S1 S4 S5) [ 0.280743] ACPI: Using IOAPIC for interrupt routing [ 0.280853] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.280883] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.280893] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.282731] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.285067] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.285071] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.285075] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.285314] PCI host bridge to bus 0000:00 [ 0.285316] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.285318] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.285320] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.285321] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.285323] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.285324] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.285326] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.285327] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.285339] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.285443] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.285473] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.285510] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.285544] pci 0000:00:03.0: [1002:5a17] type 01 class 0x060400 [ 0.285573] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.285610] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.285648] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 0.285676] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.285712] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.285746] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 0.285774] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.285810] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.285852] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.285871] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.285878] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.285885] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.285892] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.285899] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.285906] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 0.285990] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.286001] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 0.286077] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.286114] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.286132] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 0.286183] pci 0000:00:12.2: supports D1 D2 [ 0.286185] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.286221] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.286260] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.286271] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 0.286343] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.286380] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.286399] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 0.286450] pci 0000:00:13.2: supports D1 D2 [ 0.286451] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.286489] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.286531] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.286640] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.286680] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 0.286723] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.286759] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.286794] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.286903] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.286962] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.286996] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.287008] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 0.287080] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.287118] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.287168] pci 0000:00:15.0: supports D1 D2 [ 0.287206] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.287244] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400 [ 0.287293] pci 0000:00:15.3: supports D1 D2 [ 0.287332] pci 0000:00:15.3: System wakeup disabled by ACPI [ 0.287369] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.287380] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 0.287454] pci 0000:00:16.0: System wakeup disabled by ACPI [ 0.287491] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.287509] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 0.287560] pci 0000:00:16.2: supports D1 D2 [ 0.287561] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.287597] pci 0000:00:16.2: System wakeup disabled by ACPI [ 0.287634] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.287702] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.287765] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.287828] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.287892] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.287954] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.288058] pci 0000:01:00.0: [111d:8018] type 01 class 0x060400 [ 0.288130] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.296149] pci 0000:00:02.0: PCI bridge to [bus 01-04] [ 0.296154] pci 0000:00:02.0: bridge window [mem 0xfe300000-0xfe6fffff] [ 0.296205] pci 0000:02:02.0: [111d:8018] type 01 class 0x060400 [ 0.296285] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.296345] pci 0000:02:04.0: [111d:8018] type 01 class 0x060400 [ 0.296422] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold [ 0.296491] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 0.296499] pci 0000:01:00.0: bridge window [mem 0xfe300000-0xfe6fffff] [ 0.296555] pci 0000:03:00.0: [8086:10bc] type 00 class 0x020000 [ 0.296585] pci 0000:03:00.0: reg 0x10: [mem 0xfe620000-0xfe63ffff] [ 0.296596] pci 0000:03:00.0: reg 0x14: [mem 0xfe580000-0xfe5fffff] [ 0.296678] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.296742] pci 0000:03:00.1: [8086:10bc] type 00 class 0x020000 [ 0.296772] pci 0000:03:00.1: reg 0x10: [mem 0xfe600000-0xfe61ffff] [ 0.296782] pci 0000:03:00.1: reg 0x14: [mem 0xfe500000-0xfe57ffff] [ 0.296864] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 0.296922] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.296933] pci 0000:02:02.0: PCI bridge to [bus 03] [ 0.296940] pci 0000:02:02.0: bridge window [mem 0xfe500000-0xfe6fffff] [ 0.296996] pci 0000:04:00.0: [8086:10bc] type 00 class 0x020000 [ 0.297047] pci 0000:04:00.0: reg 0x10: [mem 0xfe420000-0xfe43ffff] [ 0.297057] pci 0000:04:00.0: reg 0x14: [mem 0xfe380000-0xfe3fffff] [ 0.297140] pci 0000:04:00.0: PME# supported from D0 D3hot [ 0.297204] pci 0000:04:00.1: [8086:10bc] type 00 class 0x020000 [ 0.297234] pci 0000:04:00.1: reg 0x10: [mem 0xfe400000-0xfe41ffff] [ 0.297244] pci 0000:04:00.1: reg 0x14: [mem 0xfe300000-0xfe37ffff] [ 0.297327] pci 0000:04:00.1: PME# supported from D0 D3hot [ 0.297385] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.297395] pci 0000:02:04.0: PCI bridge to [bus 04] [ 0.297402] pci 0000:02:04.0: bridge window [mem 0xfe300000-0xfe4fffff] [ 0.297460] pci 0000:05:00.0: [1002:67df] type 00 class 0x030000 [ 0.297489] pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.297501] pci 0000:05:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.297509] pci 0000:05:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.297517] pci 0000:05:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff] [ 0.297524] pci 0000:05:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref] [ 0.297576] pci 0000:05:00.0: supports D1 D2 [ 0.297578] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.297660] pci 0000:05:00.1: [1002:aaf0] type 00 class 0x040300 [ 0.297689] pci 0000:05:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit] [ 0.297756] pci 0000:05:00.1: supports D1 D2 [ 0.304150] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.304153] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.304155] pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.304158] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.304203] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.304232] pci 0000:06:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit] [ 0.304309] pci 0000:06:00.0: PME# supported from D3hot D3cold [ 0.312157] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.312164] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.312210] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.312239] pci 0000:07:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit] [ 0.312315] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 0.320150] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 0.320154] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.320197] pci 0000:08:05.0: [168c:001a] type 00 class 0x020000 [ 0.320221] pci 0000:08:05.0: reg 0x10: [mem 0xfe700000-0xfe70ffff] [ 0.320355] pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode) [ 0.320360] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.320363] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.320365] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.320366] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.320368] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.320369] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.320371] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.320372] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.320410] pci 0000:00:15.0: PCI bridge to [bus 09] [ 0.320467] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 [ 0.320502] pci 0000:0a:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.320527] pci 0000:0a:00.0: reg 0x18: [mem 0xd0304000-0xd0304fff 64bit pref] [ 0.320543] pci 0000:0a:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref] [ 0.320606] pci 0000:0a:00.0: supports D1 D2 [ 0.320607] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328154] pci 0000:00:15.3: PCI bridge to [bus 0a] [ 0.328158] pci 0000:00:15.3: bridge window [io 0xd000-0xdfff] [ 0.328164] pci 0000:00:15.3: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.328564] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0 [ 0.328614] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0 [ 0.328665] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0 [ 0.328715] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0 [ 0.328756] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0 [ 0.328788] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0 [ 0.328821] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0 [ 0.328854] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0 [ 0.329048] vgaarb: setting as boot device: PCI:0000:05:00.0 [ 0.329049] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.329051] vgaarb: loaded [ 0.329052] vgaarb: bridge control possible 0000:05:00.0 [ 0.329285] SCSI subsystem initialized [ 0.329334] libata version 3.00 loaded. [ 0.329355] ACPI: bus type USB registered [ 0.329371] usbcore: registered new interface driver usbfs [ 0.329380] usbcore: registered new interface driver hub [ 0.329403] usbcore: registered new device driver usb [ 0.329554] PCI: Using ACPI for IRQ routing [ 0.335555] PCI: pci_cache_line_size set to 64 bytes [ 0.335625] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.335627] e820: reserve RAM buffer [mem 0xbe1e4000-0xbfffffff] [ 0.335628] e820: reserve RAM buffer [mem 0xbee2e000-0xbfffffff] [ 0.335629] e820: reserve RAM buffer [mem 0xbf452000-0xbfffffff] [ 0.335630] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.335631] e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff] [ 0.335727] NetLabel: Initializing [ 0.335728] NetLabel: domain hash size = 128 [ 0.335728] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.335737] NetLabel: unlabeled traffic allowed by default [ 0.335842] clocksource: Switched to clocksource refined-jiffies [ 0.341943] AppArmor: AppArmor Filesystem Enabled [ 0.341989] pnp: PnP ACPI init [ 0.342084] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.342088] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.342307] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.342309] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342375] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342590] system 00:03: [io 0x040b] has been reserved [ 0.342592] system 00:03: [io 0x04d6] has been reserved [ 0.342594] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.342595] system 00:03: [io 0x0c14] has been reserved [ 0.342597] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.342598] system 00:03: [io 0x0c52] has been reserved [ 0.342600] system 00:03: [io 0x0c6c] has been reserved [ 0.342601] system 00:03: [io 0x0c6f] has been reserved [ 0.342603] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.342604] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.342606] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.342607] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.342609] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.342610] system 00:03: [io 0x0800-0x089f] could not be reserved [ 0.342612] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.342613] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.342615] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.342616] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.342620] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.342622] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.342623] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.342625] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.342627] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.342629] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.342630] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.342633] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342709] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.342712] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342858] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.342912] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.342915] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342958] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.343074] pnp: PnP ACPI: found 8 devices [ 0.349227] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.349261] clocksource: Switched to clocksource acpi_pm [ 0.349314] pci 0000:02:02.0: PCI bridge to [bus 03] [ 0.349320] pci 0000:02:02.0: bridge window [mem 0xfe500000-0xfe6fffff] [ 0.349328] pci 0000:02:04.0: PCI bridge to [bus 04] [ 0.349333] pci 0000:02:04.0: bridge window [mem 0xfe300000-0xfe4fffff] [ 0.349344] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 0.349351] pci 0000:01:00.0: bridge window [mem 0xfe300000-0xfe6fffff] [ 0.349359] pci 0000:00:02.0: PCI bridge to [bus 01-04] [ 0.349361] pci 0000:00:02.0: bridge window [mem 0xfe300000-0xfe6fffff] [ 0.349365] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.349366] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.349369] pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.349371] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.349373] pci 0000:00:09.0: PCI bridge to [bus 06] [ 0.349376] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.349379] pci 0000:00:0a.0: PCI bridge to [bus 07] [ 0.349381] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.349385] pci 0000:00:14.4: PCI bridge to [bus 08] [ 0.349388] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.349394] pci 0000:00:15.0: PCI bridge to [bus 09] [ 0.349401] pci 0000:00:15.3: PCI bridge to [bus 0a] [ 0.349403] pci 0000:00:15.3: bridge window [io 0xd000-0xdfff] [ 0.349408] pci 0000:00:15.3: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.349412] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.349414] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.349415] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.349417] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.349418] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.349420] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.349422] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.349423] pci_bus 0000:01: resource 1 [mem 0xfe300000-0xfe6fffff] [ 0.349425] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe6fffff] [ 0.349426] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe6fffff] [ 0.349428] pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe4fffff] [ 0.349429] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.349430] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.349432] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 0.349433] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.349435] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.349436] pci_bus 0000:08: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.349438] pci_bus 0000:08: resource 4 [io 0x0000-0x03af window] [ 0.349439] pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window] [ 0.349441] pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window] [ 0.349442] pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window] [ 0.349443] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.349445] pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.349446] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.349448] pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff] [ 0.349449] pci_bus 0000:0a: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] [ 0.349474] NET: Registered protocol family 2 [ 0.349672] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.350135] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.350347] TCP: Hash tables configured (established 262144 bind 65536) [ 0.350396] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.350525] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.350676] NET: Registered protocol family 1 [ 0.637536] pci 0000:05:00.0: Video device with shadowed ROM [ 0.637781] PCI: CLS 64 bytes, default 64 [ 0.637825] Trying to unpack rootfs image as initramfs... [ 1.122693] Freeing initrd memory: 38952K (ffff8800333dc000 - ffff8800359e6000) [ 1.123055] PCI-DMA: Disabling AGP. [ 1.123134] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.123135] PCI-DMA: using GART IOMMU. [ 1.123137] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.126472] perf: AMD NB counters detected [ 1.126525] LVT offset 0 assigned for vector 0x400 [ 1.126545] perf: AMD IBS detected (0x000000ff) [ 1.126616] Scanning for low memory corruption every 60 seconds [ 1.127032] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.127067] audit: initializing netlink subsys (disabled) [ 1.127082] audit: type=2000 audit(1474312363.991:1): initialized [ 1.127361] Initialise system trusted keyring [ 1.127511] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.127512] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.129108] zbud: loaded [ 1.129304] VFS: Disk quotas dquot_6.6.0 [ 1.129336] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.129599] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.129860] fuse init (API version 7.23) [ 1.129990] Key type big_key registered [ 1.130010] Allocating IMA MOK and blacklist keyrings. [ 1.130529] Key type asymmetric registered [ 1.130531] Asymmetric key parser 'x509' registered [ 1.130563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.130634] io scheduler noop registered [ 1.130636] io scheduler deadline registered (default) [ 1.130665] io scheduler cfq registered [ 1.131410] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.131417] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.131446] vesafb: mode is 2560x1440x32, linelength=10240, pages=0 [ 1.131447] vesafb: scrolling: redraw [ 1.131449] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.131458] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90004000000, using 14400k, total 14400k [ 1.131586] Console: switching to colour frame buffer device 320x90 [ 1.131624] fb0: VESA VGA frame buffer device [ 1.131700] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.131703] ACPI: Power Button [PWRB] [ 1.131739] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.131741] ACPI: Power Button [PWRF] [ 1.131773] ACPI: acpi_idle registered with cpuidle [ 1.132570] GHES: HEST is not enabled! [ 1.132662] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.134295] hpet_acpi_add: no address or irqs in _CRS [ 1.134337] Linux agpgart interface v0.103 [ 1.138171] brd: module loaded [ 1.139752] loop: module loaded [ 1.139962] libphy: Fixed MDIO Bus: probed [ 1.139964] tun: Universal TUN/TAP device driver, 1.6 [ 1.139965] tun: (C) 1999-2004 Max Krasnyansky [ 1.140007] PPP generic driver version 2.4.2 [ 1.140072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.140076] ehci-pci: EHCI PCI platform driver [ 1.140190] QUIRK: Enable AMD PLL fix [ 1.140209] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.140214] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.140218] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.140225] ehci-pci 0000:00:12.2: debug port 1 [ 1.140255] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.149311] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.149360] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.149362] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.149363] usb usb1: Product: EHCI Host Controller [ 1.149364] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd [ 1.149366] usb usb1: SerialNumber: 0000:00:12.2 [ 1.149472] hub 1-0:1.0: USB hub found [ 1.149477] hub 1-0:1.0: 5 ports detected [ 1.149704] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.149710] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.149712] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.149720] ehci-pci 0000:00:13.2: debug port 1 [ 1.149740] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.161359] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.161395] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.161397] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.161398] usb usb2: Product: EHCI Host Controller [ 1.161399] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd [ 1.161401] usb usb2: SerialNumber: 0000:00:13.2 [ 1.161509] hub 2-0:1.0: USB hub found [ 1.161514] hub 2-0:1.0: 5 ports detected [ 1.161724] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.161728] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.161731] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.161751] ehci-pci 0000:00:16.2: debug port 1 [ 1.161772] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.173357] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.173389] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.173391] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.173392] usb usb3: Product: EHCI Host Controller [ 1.173394] usb usb3: Manufacturer: Linux 4.4.0-36-generic ehci_hcd [ 1.173395] usb usb3: SerialNumber: 0000:00:16.2 [ 1.173506] hub 3-0:1.0: USB hub found [ 1.173512] hub 3-0:1.0: 4 ports detected [ 1.173621] ehci-platform: EHCI generic platform driver [ 1.173632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.173635] ohci-pci: OHCI PCI platform driver [ 1.173737] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.173741] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.173760] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.233373] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.233376] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.233377] usb usb4: Product: OHCI PCI host controller [ 1.233379] usb usb4: Manufacturer: Linux 4.4.0-36-generic ohci_hcd [ 1.233380] usb usb4: SerialNumber: 0000:00:12.0 [ 1.233493] hub 4-0:1.0: USB hub found [ 1.233500] hub 4-0:1.0: 5 ports detected [ 1.233697] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.233701] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.233715] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 1.293370] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.293373] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.293374] usb usb5: Product: OHCI PCI host controller [ 1.293376] usb usb5: Manufacturer: Linux 4.4.0-36-generic ohci_hcd [ 1.293377] usb usb5: SerialNumber: 0000:00:13.0 [ 1.293491] hub 5-0:1.0: USB hub found [ 1.293498] hub 5-0:1.0: 5 ports detected [ 1.293694] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.293699] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.293712] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.353371] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.353374] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.353375] usb usb6: Product: OHCI PCI host controller [ 1.353377] usb usb6: Manufacturer: Linux 4.4.0-36-generic ohci_hcd [ 1.353378] usb usb6: SerialNumber: 0000:00:14.5 [ 1.353492] hub 6-0:1.0: USB hub found [ 1.353499] hub 6-0:1.0: 2 ports detected [ 1.353663] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.353668] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.353681] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 1.413394] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.413396] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.413398] usb usb7: Product: OHCI PCI host controller [ 1.413399] usb usb7: Manufacturer: Linux 4.4.0-36-generic ohci_hcd [ 1.413400] usb usb7: SerialNumber: 0000:00:16.0 [ 1.413515] hub 7-0:1.0: USB hub found [ 1.413522] hub 7-0:1.0: 4 ports detected [ 1.413625] ohci-platform: OHCI generic platform driver [ 1.413634] uhci_hcd: USB Universal Host Controller Interface driver [ 1.413707] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.413711] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8 [ 1.418077] xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000 [ 1.418204] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.418206] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.418208] usb usb8: Product: xHCI Host Controller [ 1.418209] usb usb8: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 1.418210] usb usb8: SerialNumber: 0000:06:00.0 [ 1.418315] hub 8-0:1.0: USB hub found [ 1.418322] hub 8-0:1.0: 2 ports detected [ 1.418397] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.418400] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9 [ 1.418424] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.418438] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.418440] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.418441] usb usb9: Product: xHCI Host Controller [ 1.418442] usb usb9: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 1.418443] usb usb9: SerialNumber: 0000:06:00.0 [ 1.418565] hub 9-0:1.0: USB hub found [ 1.418571] hub 9-0:1.0: 2 ports detected [ 1.418677] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.418681] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10 [ 1.423043] xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000 [ 1.423159] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.423161] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.423162] usb usb10: Product: xHCI Host Controller [ 1.423163] usb usb10: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 1.423164] usb usb10: SerialNumber: 0000:07:00.0 [ 1.423286] hub 10-0:1.0: USB hub found [ 1.423292] hub 10-0:1.0: 2 ports detected [ 1.423365] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 1.423368] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 11 [ 1.423383] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.423397] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.423399] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.423400] usb usb11: Product: xHCI Host Controller [ 1.423401] usb usb11: Manufacturer: Linux 4.4.0-36-generic xhci-hcd [ 1.423403] usb usb11: SerialNumber: 0000:07:00.0 [ 1.423497] hub 11-0:1.0: USB hub found [ 1.423503] hub 11-0:1.0: 2 ports detected [ 1.423601] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.426494] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.426498] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.426636] mousedev: PS/2 mouse device common for all mice [ 1.426780] rtc_cmos 00:05: RTC can wake from S4 [ 1.426883] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.426898] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram [ 1.426905] i2c /dev entries driver [ 1.426951] device-mapper: uevent: version 1.0.3 [ 1.427036] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.427050] ledtrig-cpu: registered to indicate activity on CPUs [ 1.427462] NET: Registered protocol family 10 [ 1.427683] NET: Registered protocol family 17 [ 1.427693] Key type dns_resolver registered [ 1.428027] microcode: CPU0: patch_level=0x06000626 [ 1.428036] microcode: CPU1: patch_level=0x06000626 [ 1.428103] microcode: CPU2: patch_level=0x06000626 [ 1.428114] microcode: CPU3: patch_level=0x06000626 [ 1.428122] microcode: CPU4: patch_level=0x06000626 [ 1.428133] microcode: CPU5: patch_level=0x06000626 [ 1.428144] microcode: CPU6: patch_level=0x06000626 [ 1.428156] microcode: CPU7: patch_level=0x06000626 [ 1.428195] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.428366] registered taskstats version 1 [ 1.428376] Loading compiled-in X.509 certificates [ 1.429151] Loaded X.509 cert 'Build time autogenerated kernel key: 181cd957879f68b474ab1d0c92722cd44e756f77' [ 1.429168] zswap: loaded using pool lzo/zbud [ 1.431355] Key type trusted registered [ 1.435056] Key type encrypted registered [ 1.435062] AppArmor: AppArmor sha1 policy hashing enabled [ 1.435065] ima: No TPM chip found, activating TPM-bypass! [ 1.435090] evm: HMAC attrs: 0x1 [ 1.435580] Magic number: 0:630:243 [ 1.435691] rtc_cmos 00:05: setting system clock to 2016-09-19 19:12:44 UTC (1474312364) [ 1.435874] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.436153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.436154] EDD information not available. [ 1.436221] PM: Hibernation image not present or could not be loaded. [ 1.437435] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000) [ 1.437436] Write protecting the kernel read-only data: 14336k [ 1.438125] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000) [ 1.438474] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000) [ 1.448183] random: systemd-udevd urandom read with 9 bits of entropy available [ 1.461376] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.485320] usb 3-2: new high-speed USB device number 2 using ehci-pci [ 1.487477] wmi: Mapper loaded [ 1.487569] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 1.492253] pps_core: LinuxPPS API ver. 1 registered [ 1.492255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.493515] PTP clock support registered [ 1.497068] ahci 0000:00:11.0: version 3.0 [ 1.497559] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.497561] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.497853] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.497855] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.498005] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.498456] scsi host0: ahci [ 1.498780] [drm] Initialized drm 1.1.0 20060810 [ 1.498831] scsi host1: ahci [ 1.498979] scsi host2: ahci [ 1.499414] scsi host3: ahci [ 1.499541] scsi host4: ahci [ 1.499650] scsi host5: ahci [ 1.499708] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.499712] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.499715] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.499719] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.499721] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19 [ 1.499723] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19 [ 1.500707] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.500713] r8169 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.501233] r8169 0000:0a:00.0 eth0: RTL8168evl/8111evl at 0xffffc90003580000, bc:5f:f4:0f:72:ba, XID 0c900800 IRQ 49 [ 1.501236] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.511992] amdgpu: module verification failed: signature and/or required key missing - tainting kernel [ 1.515554] [drm] amdgpu kernel modesetting enabled. [ 1.517685] AMD IOMMUv2 driver by Joerg Roedel [ 1.517687] AMD IOMMUv2 functionality not available on this system [ 1.520531] CRAT table not found [ 1.520533] Finished initializing topology ret=0 [ 1.520609] kfd kfd: Initialized module [ 1.520854] checking generic (c0000000 e10000) vs hw (c0000000 10000000) [ 1.520856] fb: switching to amdgpudrmfb from VESA VGA [ 1.520886] Console: switching to colour dummy device 80x25 [ 1.521254] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x148C:0x2372 0xC7). [ 1.521264] [drm] register mmio base: 0xFEA00000 [ 1.521265] [drm] register mmio size: 262144 [ 1.521269] [drm] doorbell mmio base: 0xD0000000 [ 1.521269] [drm] doorbell mmio size: 2097152 [ 1.521275] [drm] probing gen 2 caps for device 1002:5a17 = 131cc81/0 [ 1.521281] [drm] probing mlw for device 1002:5a17 = 131cc81 [ 1.521342] amdgpu 0000:05:00.0: Invalid ROM contents [ 1.521375] ATOM BIOS: D00901 [ 1.521468] amdgpu 0000:05:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used) [ 1.521470] amdgpu 0000:05:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF [ 1.521471] [drm] Detected VRAM RAM=8192M, BAR=256M [ 1.521472] [drm] RAM width 256bits GDDR5 [ 1.521540] [TTM] Zone kernel: Available graphics memory: 16452378 kiB [ 1.521542] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.521544] [TTM] Initializing pool allocator [ 1.521550] [TTM] Initializing DMA pool allocator [ 1.521567] [drm] amdgpu: 8192M of VRAM memory ready [ 1.521569] [drm] amdgpu: 8192M of GTT memory ready. [ 1.521584] [drm] GART: num cpu pages 2097152, num gpu pages 2097152 [ 1.522806] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000). [ 1.522840] amdgpu 0000:05:00.0: amdgpu: using MSI. [ 1.522872] [drm] amdgpu: irq initialized. [ 1.522877] Can't find requested voltage id in vdd_dep_on_sclk table! [ 1.523047] amdgpu: powerplay initialized [ 1.523363] amdgpu 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000200000008, cpu addr 0xffff8800b9351008 [ 1.523404] amdgpu 0000:05:00.0: fence driver on ring 1 use gpu addr 0x000000020000001c, cpu addr 0xffff8800b935101c [ 1.523445] amdgpu 0000:05:00.0: fence driver on ring 2 use gpu addr 0x0000000200000030, cpu addr 0xffff8800b9351030 [ 1.523484] amdgpu 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000200000044, cpu addr 0xffff8800b9351044 [ 1.523524] amdgpu 0000:05:00.0: fence driver on ring 4 use gpu addr 0x0000000200000058, cpu addr 0xffff8800b9351058 [ 1.523565] amdgpu 0000:05:00.0: fence driver on ring 5 use gpu addr 0x000000020000006c, cpu addr 0xffff8800b935106c [ 1.523604] amdgpu 0000:05:00.0: fence driver on ring 6 use gpu addr 0x0000000200000080, cpu addr 0xffff8800b9351080 [ 1.523644] amdgpu 0000:05:00.0: fence driver on ring 7 use gpu addr 0x0000000200000094, cpu addr 0xffff8800b9351094 [ 1.523680] amdgpu 0000:05:00.0: fence driver on ring 8 use gpu addr 0x00000002000000a8, cpu addr 0xffff8800b93510a8 [ 1.523760] amdgpu 0000:05:00.0: fence driver on ring 9 use gpu addr 0x00000002000000bc, cpu addr 0xffff8800b93510bc [ 1.523800] amdgpu 0000:05:00.0: fence driver on ring 10 use gpu addr 0x00000002000000d0, cpu addr 0xffff8800b93510d0 [ 1.523945] [drm] Found UVD firmware Version: 1.79 Family ID: 16 [ 1.525114] amdgpu 0000:05:00.0: fence driver on ring 11 use gpu addr 0x000000000109c420, cpu addr 0xffffc90003a5a420 [ 1.525197] [drm] Found VCE firmware Version: 52.4 Binary ID: 3 [ 1.525468] amdgpu 0000:05:00.0: fence driver on ring 12 use gpu addr 0x00000002000000f8, cpu addr 0xffff8800b93510f8 [ 1.525524] amdgpu 0000:05:00.0: fence driver on ring 13 use gpu addr 0x000000020000010c, cpu addr 0xffff8800b935110c [ 1.540269] r8169 0000:0a:00.0 enp10s0: renamed from eth0 [ 1.594049] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 1.594051] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.594053] usb 1-3: Product: USB 2.0 Hub [ 1.594271] hub 1-3:1.0: USB hub found [ 1.594362] hub 1-3:1.0: 4 ports detected [ 1.664966] [AVFS] Something is broken. See log! [ 1.717396] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 1.741308] usb 5-5: new full-speed USB device number 2 using ohci-pci [ 1.776209] [drm] DAL is enabled [ 1.776397] [drm] [FeatureOverride_overriden feature] Overridden FEATURE_ENABLE_GPU_SCALING is enabled now [ 1.776413] [drm] [Backlight_Caps] This method is not supported [ 1.776621] [drm] DC: create_links: connectors_num: physical:5, virtual:0 [ 1.776625] [drm] [HwTrace_Hotplug] Connector[0] description:signal 32 [ 1.776631] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC1 [1] [ 1.776645] [drm] [HwTrace_Hotplug] Connector[1] description:signal 32 [ 1.776649] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC3 [3] [ 1.776661] [drm] [HwTrace_Hotplug] Connector[2] description:signal 32 [ 1.776664] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC2 [2] [ 1.776676] [drm] [HwTrace_Hotplug] Connector[3] description:signal 4 [ 1.776679] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC4 [4] [ 1.776691] [drm] [HwTrace_Hotplug] Connector[4] description:signal 2 [ 1.776694] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC6 [6] [ 1.776857] usb 3-2: New USB device found, idVendor=058f, idProduct=6362 [ 1.776859] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.776861] usb 3-2: Product: Mass Storage Device [ 1.776862] usb 3-2: Manufacturer: Generic [ 1.776863] usb 3-2: SerialNumber: 058F63626476 [ 1.781680] usb-storage 3-2:1.0: USB Mass Storage device detected [ 1.781814] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:1f:29:5f:08:61 [ 1.781818] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.781851] scsi host6: usb-storage 3-2:1.0 [ 1.781896] e1000e 0000:03:00.0 eth0: MAC: 0, PHY: 4, PBA No: D98771-005 [ 1.781956] usbcore: registered new interface driver usb-storage [ 1.782082] e1000e 0000:03:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.783297] usbcore: registered new interface driver uas [ 1.785339] usb 8-1: new full-speed USB device number 2 using xhci_hcd [ 1.793432] [drm] [IfTrace_DC] Display Core initialized [ 1.802161] [drm] [Conn_Detect] [DP-1] Rx Caps: 12 0A 84 01 01 00 01 00 02 02 06 00 04 00 00 ^ [ 1.806552] [drm] [Conn_LKTN] [DP-1] HBRx4 pass VS=0, PE=0^ [ 1.817382] ata6: SATA link down (SStatus 0 SControl 300) [ 1.817387] [drm] [Conn_Detect] [DP-1] ASUS PB278: [Block 0] 00 FF FF FF FF FF FF 00 04 69 A3 27 4E A1 03 00 1F 17 01 04 A5 3C 22 78 3A A5 95 AA 54 4F A1 26 0A 50 54 B7 EF 00 D1 C0 B3 00 95 00 81 80 81 40 81 00 81 C0 71 4F 56 5E 00 A0 A0 A0 29 50 30 20 35 00 55 50 21 00 00 1A 00 00 00 FF 00 44 37 4C 4D 54 46 32 33 37 39 30 32 0A 00 00 00 FD 00 18 4C 18 63 1E 04 11 01 40 F8 38 F0 3C 00 00 00 FC 00 41 53 55 53 20 50 42 32 37 38 0A 20 20 01 4C ^ [ 1.817412] [drm] [Conn_Detect] [DP-1] ASUS PB278: [Block 1] 02 03 22 71 4F 01 02 03 11 12 13 04 14 05 1F 90 0E 0F 1D 1E 23 09 17 07 83 01 00 00 65 6E 0C 00 10 00 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 55 50 21 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 55 00 55 50 21 00 00 1E 01 1D 00 BC 52 D0 1E 20 B8 28 55 40 55 50 21 00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00 55 50 21 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 96 ^ [ 1.817418] [drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = 6904, product_id = 27A3, serial_number = 3A14E, manufacture_week = 31, manufacture_year = 23, display_name = ASUS PB278, speaker_flag = 1, audio_mode_count = 1 [ 1.817420] [drm] [Detection_EDID Parser] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 23, sample_size = 7 [ 1.817422] [drm] [HwTrace_Hotplug] link=0, dc_sink_in=ffff880812579400 is now Connected [ 1.817423] [drm] DCHPD: connector_id=0: Old sink= (null) New sink=ffff880812579400 [ 1.826098] [drm] [Conn_Detect] [DP-2] Rx Caps: 12 0A 84 01 01 00 01 00 02 02 06 00 04 00 00 ^ [ 1.830198] [drm] [Conn_LKTN] [DP-2] HBRx4 pass VS=0, PE=0^ [ 1.841033] [drm] [Conn_Detect] [DP-2] ASUS PB278: [Block 0] 00 FF FF FF FF FF FF 00 04 69 A3 27 E6 9E 02 00 0E 18 01 04 A5 3C 22 78 3A A5 95 AA 54 4F A1 26 0A 50 54 B7 EF 00 D1 C0 B3 00 95 00 81 80 81 40 81 00 81 C0 71 4F 56 5E 00 A0 A0 A0 29 50 30 20 35 00 55 50 21 00 00 1A 00 00 00 FF 00 45 33 4C 4D 54 46 31 37 31 37 35 30 0A 00 00 00 FD 00 18 4C 18 63 1E 04 11 01 40 F8 38 F0 3C 00 00 00 FC 00 41 53 55 53 20 50 42 32 37 38 0A 20 20 01 CD ^ [ 1.841045] [drm] [Conn_Detect] [DP-2] ASUS PB278: [Block 1] 02 03 22 71 4F 01 02 03 11 12 13 04 14 05 1F 90 0E 0F 1D 1E 23 09 17 07 83 01 00 00 65 6E 0C 00 10 00 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 55 50 21 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 55 00 55 50 21 00 00 1E 01 1D 00 BC 52 D0 1E 20 B8 28 55 40 55 50 21 00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00 55 50 21 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 96 ^ [ 1.841048] [drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = 6904, product_id = 27A3, serial_number = 29EE6, manufacture_week = 14, manufacture_year = 24, display_name = ASUS PB278, speaker_flag = 1, audio_mode_count = 1 [ 1.841050] [drm] [Detection_EDID Parser] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 23, sample_size = 7 [ 1.841052] [drm] [HwTrace_Hotplug] link=1, dc_sink_in=ffff88081257b400 is now Connected [ 1.841053] [drm] DCHPD: connector_id=1: Old sink= (null) New sink=ffff88081257b400 [ 1.841318] [drm] [HwTrace_Hotplug] link=2, dc_sink_in= (null) is now Disconnected [ 1.841320] [drm] DCHPD: connector_id=2: dc_sink didn't change. [ 1.841431] [drm] [HwTrace_Hotplug] link=3, dc_sink_in= (null) is now Disconnected [ 1.841433] [drm] DCHPD: connector_id=3: dc_sink didn't change. [ 1.841533] [drm] [HwTrace_Hotplug] link=4, dc_sink_in= (null) is now Disconnected [ 1.841534] [drm] DCHPD: connector_id=4: dc_sink didn't change. [ 1.841542] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.841543] [drm] Driver supports precise vblank timestamp query. [ 1.841543] [drm] KMS initialized. [ 1.842869] [drm] ring test on 0 succeeded in 10 usecs [ 1.843097] [drm] ring test on 1 succeeded in 28 usecs [ 1.843131] [drm] ring test on 2 succeeded in 16 usecs [ 1.843139] [drm] ring test on 3 succeeded in 3 usecs [ 1.843147] [drm] ring test on 4 succeeded in 3 usecs [ 1.843153] [drm] ring test on 5 succeeded in 2 usecs [ 1.843159] [drm] ring test on 6 succeeded in 2 usecs [ 1.843167] [drm] ring test on 7 succeeded in 3 usecs [ 1.843173] [drm] ring test on 8 succeeded in 2 usecs [ 1.843201] [drm] ring test on 9 succeeded in 6 usecs [ 1.843214] [drm] ring test on 10 succeeded in 6 usecs [ 1.849966] usb 1-4: New USB device found, idVendor=1a40, idProduct=0201 [ 1.849969] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.849971] usb 1-4: Product: USB 2.0 Hub [MTT] [ 1.850240] hub 1-4:1.0: USB hub found [ 1.850338] hub 1-4:1.0: 7 ports detected [ 1.869031] [drm] ring test on 11 succeeded in 1 usecs [ 1.869032] [drm] UVD initialized successfully. [ 1.929374] usb 1-3.4: new full-speed USB device number 4 using ehci-pci [ 1.953411] usb 8-1: device descriptor read/64, error -71 [ 1.958178] e1000e 0000:03:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:1f:29:5f:08:60 [ 1.958181] e1000e 0000:03:00.1 eth1: Intel(R) PRO/1000 Network Connection [ 1.958257] e1000e 0000:03:00.1 eth1: MAC: 0, PHY: 4, PBA No: D98771-005 [ 1.958375] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.968280] [drm] ring test on 12 succeeded in 9 usecs [ 1.968292] [drm] ring test on 13 succeeded in 4 usecs [ 1.968293] [drm] VCE initialized successfully. [ 1.986193] [drm] fb mappable at 0xC12A6000 [ 1.986194] [drm] vram apper at 0xC0000000 [ 1.986195] [drm] size 14745600 [ 1.986196] [drm] fb depth is 24 [ 1.986197] [drm] pitch is 10240 [ 1.986324] fbcon: amdgpudrmfb (fb0) is primary device [ 1.986402] Console: switching to colour frame buffer device 320x90 [ 1.986441] amdgpu 0000:05:00.0: fb0: amdgpudrmfb frame buffer device [ 1.989405] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.992272] ata5.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.03, max UDMA/100 [ 1.993409] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.995375] ata1.00: supports DRM functions and may not be fully accessible [ 1.995554] ata1.00: disabling queued TRIM support [ 1.995557] ata1.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0DB6Q, max UDMA/133 [ 1.995559] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.995790] ata1.00: supports DRM functions and may not be fully accessible [ 1.995869] ata1.00: disabling queued TRIM support [ 1.995872] ata1.00: configured for UDMA/133 [ 1.996064] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 1.996309] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.996372] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.996472] sd 0:0:0:0: [sda] Write Protect is off [ 1.996475] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.996512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.997137] ata5.00: configured for UDMA/100 [ 1.997222] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.997349] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.997379] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.997505] ata2.00: supports DRM functions and may not be fully accessible [ 1.997559] ata2.00: disabling queued TRIM support [ 1.997560] ata2.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0DB6Q, max UDMA/133 [ 1.997562] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.997742] ata2.00: supports DRM functions and may not be fully accessible [ 1.997820] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.997821] ata2.00: disabling queued TRIM support [ 1.997824] ata2.00: configured for UDMA/133 [ 1.997974] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 [ 1.998171] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.998186] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.998295] sd 1:0:0:0: [sdb] Write Protect is off [ 1.998297] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.998333] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.998990] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > [ 1.999519] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.001465] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.001624] [drm] ib test on ring 1 succeeded in 0 usecs [ 2.001668] [drm] ib test on ring 2 succeeded in 0 usecs [ 2.001730] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.001777] [drm] ib test on ring 4 succeeded in 0 usecs [ 2.001828] [drm] ib test on ring 5 succeeded in 0 usecs [ 2.001881] [drm] ib test on ring 6 succeeded in 0 usecs [ 2.001947] [drm] ib test on ring 7 succeeded in 0 usecs [ 2.001999] [drm] ib test on ring 8 succeeded in 0 usecs [ 2.002052] [drm] ib test on ring 9 succeeded in 0 usecs [ 2.002089] [drm] ib test on ring 10 succeeded in 0 usecs [ 2.003126] [drm] ib test on ring 11 succeeded [ 2.003290] [drm] ib test on ring 12 succeeded [ 2.003303] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 2.003305] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.007008] [drm] Initialized amdgpu 3.2.0 20150101 for 0000:05:00.0 on minor 0 [ 2.009191] ata3.00: configured for UDMA/133 [ 2.009391] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5 [ 2.009587] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.009589] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 2.009615] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.009689] sd 2:0:0:0: [sdc] Write Protect is off [ 2.009692] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.009733] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.011390] usb 5-5: New USB device found, idVendor=28de, idProduct=1142 [ 2.011392] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.011393] usb 5-5: Product: Steam Controller [ 2.011395] usb 5-5: Manufacturer: Valve Software [ 2.017028] hidraw: raw HID events driver (C) Jiri Kosina [ 2.038545] usbcore: registered new interface driver usbhid [ 2.038547] usbhid: USB HID core driver [ 2.040288] input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/0003:28DE:1142.0001/input/input5 [ 2.040750] usb 1-3.4: New USB device found, idVendor=04f9, idProduct=01e4 [ 2.040752] usb 1-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=3 [ 2.040754] usb 1-3.4: SerialNumber: BROG8F793058 [ 2.041075] usb-storage 1-3.4:1.2: USB Mass Storage device detected [ 2.041196] scsi host7: usb-storage 1-3.4:1.2 [ 2.093588] hid-generic 0003:28DE:1142.0001: input,hidraw0: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:13.0-5/input0 [ 2.095642] hid-generic 0003:28DE:1142.0002: hiddev0,hidraw1: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-5/input1 [ 2.098664] hid-generic 0003:28DE:1142.0003: hiddev0,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-5/input2 [ 2.101567] hid-generic 0003:28DE:1142.0004: hiddev0,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-5/input3 [ 2.104612] hid-generic 0003:28DE:1142.0005: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:13.0-5/input4 [ 2.105359] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.112966] ata4.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 2.112969] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.125379] tsc: Refined TSC clocksource calibration: 4030.201 MHz [ 2.125383] usb 1-4.5: new high-speed USB device number 5 using ehci-pci [ 2.125390] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3a17ce4a1e1, max_idle_ns: 440795208557 ns [ 2.126211] e1000e 0000:04:00.0 eth2: (PCI Express:2.5GT/s:Width x4) 00:1f:29:5f:08:63 [ 2.126215] e1000e 0000:04:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 2.126293] e1000e 0000:04:00.0 eth2: MAC: 0, PHY: 4, PBA No: D98771-005 [ 2.126429] e1000e 0000:04:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.137345] ata4.00: configured for UDMA/133 [ 2.137568] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5 [ 2.137787] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.137789] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 2.137816] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.137902] sd 3:0:0:0: [sdd] Write Protect is off [ 2.137905] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.137963] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.140534] scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.03 PQ: 0 ANSI: 5 [ 2.153164] sdd: sdd1 sdd2 [ 2.153590] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.164130] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.164135] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.164395] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.164478] sr 4:0:0:0: Attached scsi generic sg4 type 5 [ 2.221930] usb 1-4.5: New USB device found, idVendor=1a40, idProduct=0101 [ 2.221932] usb 1-4.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.221934] usb 1-4.5: Product: USB 2.0 Hub [MTT] [ 2.222201] hub 1-4.5:1.0: USB hub found [ 2.222303] hub 1-4.5:1.0: 4 ports detected [ 2.229469] usb 8-1: device descriptor read/64, error -71 [ 2.302261] e1000e 0000:04:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:1f:29:5f:08:62 [ 2.302263] e1000e 0000:04:00.1 eth3: Intel(R) PRO/1000 Network Connection [ 2.302346] e1000e 0000:04:00.1 eth3: MAC: 0, PHY: 4, PBA No: D98771-005 [ 2.304678] e1000e 0000:03:00.0 enp3s0f0: renamed from eth0 [ 2.313621] e1000e 0000:04:00.1 enp4s0f1: renamed from eth3 [ 2.333507] e1000e 0000:03:00.1 enp3s0f1: renamed from eth1 [ 2.349514] e1000e 0000:04:00.0 enp4s0f0: renamed from eth2 [ 2.420754] sdc: sdc1 sdc2 [ 2.421251] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.448892] usb 9-2: new SuperSpeed USB device number 2 using xhci_hcd [ 2.494138] usb 1-4.5.2: new low-speed USB device number 6 using ehci-pci [ 2.590140] usb 1-4.5.2: New USB device found, idVendor=04b4, idProduct=0033 [ 2.590146] usb 1-4.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.594912] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.2/1-4.5.2:1.0/0003:04B4:0033.0006/input/input6 [ 2.595105] hid-generic 0003:04B4:0033.0006: input,hidraw5: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:12.2-4.5.2/input0 [ 2.665390] usb 1-4.5.3: new low-speed USB device number 7 using ehci-pci [ 2.688898] microcode: CPU0: new patch_level=0x0600063d [ 2.694063] microcode: CPU2: new patch_level=0x0600063d [ 2.699342] microcode: CPU4: new patch_level=0x0600063d [ 2.704610] microcode: CPU6: new patch_level=0x0600063d [ 2.705228] usb 9-2: New USB device found, idVendor=2109, idProduct=0812 [ 2.705230] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.705232] usb 9-2: Product: USB3.0 Hub [ 2.705234] usb 9-2: Manufacturer: VIA Labs, Inc. [ 2.706439] hub 9-2:1.0: USB hub found [ 2.706571] hub 9-2:1.0: 4 ports detected [ 2.739220] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.770184] usb 1-4.5.3: New USB device found, idVendor=046a, idProduct=0021 [ 2.770187] usb 1-4.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.780385] input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.3/1-4.5.3:1.0/0003:046A:0021.0007/input/input7 [ 2.782158] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 2.782779] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 2.783407] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 2.784156] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS [ 2.784444] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 2.784597] sd 6:0:0:1: Attached scsi generic sg6 type 0 [ 2.784761] sd 6:0:0:2: Attached scsi generic sg7 type 0 [ 2.784897] sd 6:0:0:3: Attached scsi generic sg8 type 0 [ 2.817431] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 2.817610] systemd[1]: Detected architecture x86-64. [ 2.817768] systemd[1]: Set hostname to . [ 2.833420] hid-generic 0003:046A:0021.0007: input,hidraw6: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:12.2-4.5.3/input0 [ 2.843216] input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.3/1-4.5.3:1.1/0003:046A:0021.0008/input/input8 [ 2.869358] usb 8-1: new full-speed USB device number 3 using xhci_hcd [ 2.897460] hid-generic 0003:046A:0021.0008: input,hidraw7: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:12.2-4.5.3/input1 [ 2.913360] systemd[1]: Reached target Swap. [ 2.913429] systemd[1]: Reached target User and Group Name Lookups. [ 2.913472] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.913511] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.913538] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.913555] systemd[1]: Reached target Encrypted Volumes. [ 2.913584] systemd[1]: Listening on Syslog Socket. [ 2.913612] systemd[1]: Listening on LVM2 metadata daemon socket. [ 2.913908] systemd[1]: Created slice System Slice. [ 2.914153] systemd[1]: Created slice system-tor.slice. [ 2.914191] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.914220] systemd[1]: Listening on udev Kernel Socket. [ 2.914249] systemd[1]: Listening on LVM2 poll daemon socket. [ 2.914285] systemd[1]: Listening on Journal Socket. [ 2.929445] systemd[1]: Mounting POSIX Message Queue File System... [ 2.930146] systemd[1]: Starting Uncomplicated firewall... [ 2.931846] systemd[1]: Starting Load Kernel Modules... [ 2.932618] systemd[1]: Mounting Debug File System... [ 2.933376] systemd[1]: Started Read required files in advance. [ 2.933857] systemd[1]: Created slice User and Session Slice. [ 2.933894] systemd[1]: Reached target Slices. [ 2.933954] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 2.934256] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.934882] systemd[1]: Starting Set console keymap... [ 2.935715] systemd[1]: Started Braille Device Support. [ 2.935849] systemd[1]: Listening on udev Control Socket. [ 2.935941] systemd[1]: Listening on Journal Audit Socket. [ 2.936779] systemd[1]: Starting Journal Service... [ 2.937876] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.938915] systemd[1]: Mounting RPC Pipe File System... [ 2.939935] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 2.940900] systemd[1]: Mounting Huge Pages File System... [ 2.941130] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.943685] systemd[1]: Mounted Debug File System. [ 2.943709] systemd[1]: Mounted Huge Pages File System. [ 2.943726] systemd[1]: Mounted POSIX Message Queue File System. [ 2.944250] systemd[1]: Started Uncomplicated firewall. [ 2.944731] lp: driver loaded but no devices found [ 2.944923] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.947760] ppdev: user-space parallel port driver [ 2.952348] systemd[1]: Started Load Kernel Modules. [ 2.956499] RPC: Registered named UNIX socket transport module. [ 2.956503] RPC: Registered udp transport module. [ 2.956505] RPC: Registered tcp transport module. [ 2.956506] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.957584] systemd[1]: Mounted RPC Pipe File System. [ 2.969342] usb 1-4.5.4: new high-speed USB device number 8 using ehci-pci [ 2.982473] systemd[1]: Started LVM2 metadata daemon. [ 2.983348] systemd[1]: Mounting FUSE Control File System... [ 2.984204] systemd[1]: Starting Apply Kernel Variables... [ 2.985166] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.987084] systemd[1]: Mounted FUSE Control File System. [ 2.989936] systemd[1]: Started Apply Kernel Variables. [ 3.001693] systemd[1]: Started Set console keymap. [ 3.002401] systemd[1]: Started Create Static Device Nodes in /dev. [ 3.017558] systemd[1]: Starting udev Kernel Device Manager... [ 3.018864] systemd[1]: Started Journal Service. [ 3.032994] random: nonblocking pool is initialized [ 3.035638] sd 6:0:0:1: [sdf] Attached SCSI removable disk [ 3.037389] usb 8-1: device descriptor read/64, error -71 [ 3.039002] sd 6:0:0:2: [sdg] Attached SCSI removable disk [ 3.039635] sd 6:0:0:3: [sdh] Attached SCSI removable disk [ 3.040381] sd 6:0:0:0: [sde] Attached SCSI removable disk [ 3.049747] scsi 7:0:0:0: Direct-Access Brother DCP-357C 1.00 PQ: 0 ANSI: 2 [ 3.050071] sd 7:0:0:0: Attached scsi generic sg9 type 0 [ 3.062892] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 3.086164] systemd-journald[343]: Received request to flush runtime journal from PID 1 [ 3.115525] kvm: Nested Virtualization enabled [ 3.115531] kvm: Nested Paging enabled [ 3.125708] clocksource: Switched to clocksource tsc [ 3.129975] sd 7:0:0:0: [sdi] Attached SCSI removable disk [ 3.221686] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.302005] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20150930/utaddress-254) [ 3.302012] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.309381] usb 8-1: device descriptor read/64, error -71 [ 3.335570] EDAC MC: Ver: 3.0.0 [ 3.339682] MCE: In-kernel MCE decoding enabled. [ 3.339873] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client [ 3.339876] snd_hda_intel 0000:05:00.1: Force to non-snoop mode [ 3.341963] AMD64 EDAC driver v3.4.0 [ 3.341990] EDAC amd64: DRAM ECC disabled. [ 3.341998] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 3.351229] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input9 [ 3.351479] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input10 [ 3.351677] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input11 [ 3.351819] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input12 [ 3.352041] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input13 [ 3.352346] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input14 [ 3.356200] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 3.356203] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.356205] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.356206] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.356208] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 3.356209] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.356211] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 3.356212] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 3.359119] ath5k 0000:08:05.0: registered as 'phy0' [ 3.370449] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 3.370726] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 3.371085] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 3.371516] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 3.371856] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 3.372150] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 3.421093] AVX version of gcm_enc/dec engaged. [ 3.421096] AES CTR mode by8 optimization enabled [ 3.557831] cfg80211: World regulatory domain updated: [ 3.557834] cfg80211: DFS Master region: unset [ 3.557836] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3.557838] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3.557839] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3.557841] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 3.557842] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3.557844] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3.557845] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 3.557846] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 3.557847] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 3.585339] usb 8-1: new full-speed USB device number 4 using xhci_hcd [ 3.587771] usb 8-1: Device not responding to setup address. [ 3.734024] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 3.740364] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 3.791777] usb 8-1: Device not responding to setup address. [ 3.993346] usb 8-1: device not accepting address 4, error -71 [ 3.997489] ath: EEPROM regdomain: 0x809c [ 3.997491] ath: EEPROM indicates we should expect a country code [ 3.997492] ath: doing EEPROM country->regdmn map search [ 3.997493] ath: country maps to regdmn code: 0x52 [ 3.997494] ath: Country alpha2 being used: CN [ 3.997495] ath: Regpair used: 0x52 [ 4.001485] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.001695] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) [ 4.005263] ath5k 0000:08:05.0 wlp8s5: renamed from wlan0 [ 4.026770] cfg80211: Regulatory domain changed to country: CN [ 4.026772] cfg80211: DFS Master region: FCC [ 4.026774] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.026776] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.026778] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 4.026779] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 4.026781] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 4.026782] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 4.026783] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A) [ 4.026784] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 4.161407] usb 8-1: new full-speed USB device number 5 using xhci_hcd [ 4.163789] usb 8-1: Device not responding to setup address. [ 4.171738] usb 1-4.5.4: New USB device found, idVendor=046d, idProduct=082d [ 4.171740] usb 1-4.5.4: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 4.171742] usb 1-4.5.4: Product: HD Pro Webcam C920 [ 4.171744] usb 1-4.5.4: SerialNumber: 9EAC20FF [ 4.188684] media: Linux media interface: v0.10 [ 4.194995] Linux video capture interface: v2.00 [ 4.367719] usb 8-1: Device not responding to setup address. [ 4.372308] usbcore: registered new interface driver snd-usb-audio [ 4.372391] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 4.374024] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.4/1-4.5.4:1.0/input/input21 [ 4.374173] usbcore: registered new interface driver uvcvideo [ 4.374174] USB Video Class driver (1.1.1) [ 4.535069] audit: type=1400 audit(1474312367.594:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=996 comm="apparmor_parser" [ 4.535095] audit: type=1400 audit(1474312367.594:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=989 comm="apparmor_parser" [ 4.535300] audit: type=1400 audit(1474312367.594:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=997 comm="apparmor_parser" [ 4.536279] audit: type=1400 audit(1474312367.594:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1000 comm="apparmor_parser" [ 4.536303] audit: type=1400 audit(1474312367.594:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=992 comm="apparmor_parser" [ 4.536452] audit: type=1400 audit(1474312367.594:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=991 comm="apparmor_parser" [ 4.536462] audit: type=1400 audit(1474312367.594:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=991 comm="apparmor_parser" [ 4.536468] audit: type=1400 audit(1474312367.594:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=991 comm="apparmor_parser" [ 4.536473] audit: type=1400 audit(1474312367.594:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=991 comm="apparmor_parser" [ 4.569353] usb 8-1: device not accepting address 5, error -71 [ 4.569454] usb usb8-port1: unable to enumerate USB device [ 4.574539] cgroup: new mount options do not match the existing superblock, will be ignored [ 4.604379] [drm] Atomic commit: SET crtc id 0: [ffff880813e4c000] [ 4.604385] [drm] [IfTrace_DC] dc_commit_targets: 1 targets [ 4.604387] [drm] [IfTrace_DC] core_target 0x18e53b80: stream_count=1 [ 4.604391] [drm] [IfTrace_DC] core_stream 0x15746200: src: 0, 0, 0, 0; dst: 0, 0, 0, 0; [ 4.604393] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 4.604395] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 237902 [ 4.604397] [drm] [IfTrace_DC] link: 0 [ 4.626779] [drm] [Detection_DP caps] Link: 0 eDP panel mode supported: 0 eDP panel mode enabled: 0 [ 4.629778] [drm] [Conn_LKTN] [DP-1] HBRx4 pass VS=0, PE=0^ [ 4.630240] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 4.630268] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 4.630400] [drm] [Conn_Mode] [DP-1] {2560x1440, 2720x1481@241500Khz}^ [ 4.630405] [drm] DM_NOT_IMPL: dm_bandwidth_update [ 4.632210] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 4.632333] [drm] [IfTrace_DC] Pipe:0 0x15747e00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.632582] [drm] Atomic commit: SET crtc id 1: [ffff880813e4d000] [ 4.632584] [drm] [IfTrace_DC] dc_commit_targets: 2 targets [ 4.632586] [drm] [IfTrace_DC] core_target 0x18e53b80: stream_count=1 [ 4.632588] [drm] [IfTrace_DC] core_stream 0x15746200: src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.632590] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 4.632592] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 237902 [ 4.632593] [drm] [IfTrace_DC] link: 0 [ 4.632595] [drm] [IfTrace_DC] core_target 0x18e53e60: stream_count=1 [ 4.632596] [drm] [IfTrace_DC] core_stream 0x15747600: src: 0, 0, 0, 0; dst: 0, 0, 0, 0; [ 4.632598] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 4.632599] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 171750 [ 4.632601] [drm] [IfTrace_DC] link: 1 [ 4.633889] [drm] [Detection_DP caps] Link: 1 eDP panel mode supported: 0 eDP panel mode enabled: 0 [ 4.636872] [drm] [Conn_LKTN] [DP-2] HBRx4 pass VS=0, PE=0^ [ 4.637356] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD [ 4.637528] [drm] [Conn_Mode] [DP-1] {2560x1440, 2720x1481@241500Khz}^ [ 4.637532] [drm] [Conn_Mode] [DP-2] {2560x1440, 2720x1481@241500Khz}^ [ 4.637533] [drm] [Sync_Timing] GSL: Setting-up... [ 4.637541] [drm] [Sync_Timing] GSL: enabling trigger-reset [ 4.637547] [drm] [Sync_Timing] GSL: waiting for reset to occur. [ 4.642861] [drm] [Sync_Timing] GSL: reset occurred at wait count: 1 [ 4.642863] [drm] [Sync_Timing] GSL: disabling trigger-reset. [ 4.642868] [drm] [Sync_Timing] GSL: Restoring register states. [ 4.642871] [drm] [Sync_Timing] GSL: Set-up complete. [ 4.642874] [drm] DM_NOT_IMPL: dm_bandwidth_update [ 4.644208] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 4.644380] [drm] [IfTrace_DC] Pipe:1 0x15747c00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.644785] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 4.644943] [drm] [IfTrace_DC] Pipe:0 0x130dbe00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.645156] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 4.645312] [drm] [IfTrace_DC] Pipe:1 0x15747e00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.645647] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 4.645815] [drm] [IfTrace_DC] Pipe:0 0x15747c00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.646026] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 4.646182] [drm] [IfTrace_DC] Pipe:1 0x130dbe00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.646499] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 4.646655] [drm] [IfTrace_DC] Pipe:0 0x15747e00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.646870] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 4.647042] [drm] [IfTrace_DC] Pipe:1 0x15747c00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 4.719523] IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready [ 4.737366] usb 8-2: new high-speed USB device number 6 using xhci_hcd [ 4.923355] usb 8-2: New USB device found, idVendor=2109, idProduct=2812 [ 4.923359] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.923360] usb 8-2: Product: USB2.0 Hub [ 4.923362] usb 8-2: Manufacturer: VIA Labs, Inc. [ 4.924702] hub 8-2:1.0: USB hub found [ 4.924851] hub 8-2:1.0: 4 ports detected [ 4.969694] IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready [ 4.972402] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready [ 5.217429] usb 8-2.4: new full-speed USB device number 7 using xhci_hcd [ 5.221662] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready [ 5.224228] IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready [ 5.413451] usb 8-2.4: New USB device found, idVendor=0a12, idProduct=0001 [ 5.413455] usb 8-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.430940] Bluetooth: Core ver 2.21 [ 5.430955] NET: Registered protocol family 31 [ 5.430957] Bluetooth: HCI device and connection manager initialized [ 5.430961] Bluetooth: HCI socket layer initialized [ 5.430963] Bluetooth: L2CAP socket layer initialized [ 5.430969] Bluetooth: SCO socket layer initialized [ 5.436151] usbcore: registered new interface driver btusb [ 5.473683] IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready [ 5.478282] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready [ 5.591539] r8169 0000:0a:00.0 enp10s0: link down [ 5.591540] r8169 0000:0a:00.0 enp10s0: link down [ 5.591585] IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready [ 5.597639] IPv6: ADDRCONF(NETDEV_UP): wlp8s5: link is not ready [ 5.607705] IPv6: ADDRCONF(NETDEV_UP): wlp8s5: link is not ready [ 5.610262] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready [ 5.641811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.641813] Bluetooth: BNEP filters: protocol multicast [ 5.641818] Bluetooth: BNEP socket layer initialized [ 5.842650] aufs 4.x-rcN-20160111 [ 5.857616] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready [ 5.857629] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 5.859059] Bridge firewalling registered [ 5.864566] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 5.882664] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.946885] usblp 1-3.4:1.0: usblp4: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4 [ 5.946925] usbcore: registered new interface driver usblp [ 5.989207] IPv6: ADDRCONF(NETDEV_UP): wlp8s5: link is not ready [ 6.013165] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 6.176385] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 6.176608] [drm] [IfTrace_DC] Pipe:0 0xb952b200: addr hi:0x0, addr low:0x20b6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 6.187234] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 6.187392] [drm] [IfTrace_DC] Pipe:0 0xb952b800: addr hi:0x0, addr low:0x20b6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 6.187615] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 6.187771] [drm] [IfTrace_DC] Pipe:1 0xb952b200: addr hi:0x0, addr low:0x2ec6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 6.198439] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 6.198597] [drm] [IfTrace_DC] Pipe:1 0xb952ba00: addr hi:0x0, addr low:0x2ec6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 6.602378] e1000e: enp4s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 6.602545] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f0: link becomes ready [ 6.870360] e1000e: enp3s0f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 6.870516] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f1: link becomes ready [ 7.146376] e1000e: enp3s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 7.146532] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f0: link becomes ready [ 7.473363] r8169 0000:0a:00.0 enp10s0: link up [ 7.473369] IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready [ 7.494372] e1000e: enp4s0f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 7.494530] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f1: link becomes ready [ 11.017125] usblp4: removed [ 11.019412] usblp 1-3.4:1.0: usblp4: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4 [ 13.170647] FS-Cache: Loaded [ 13.182892] FS-Cache: Netfs 'nfs' registered for caching [ 13.195647] NFS: Registering the id_resolver key type [ 13.195663] Key type id_resolver registered [ 13.195664] Key type id_legacy registered [ 13.421462] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.421650] [drm] [IfTrace_DC] Pipe:0 0x1432ae00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.421871] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.422026] [drm] [IfTrace_DC] Pipe:1 0x1432a200: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.422247] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.422403] [drm] [IfTrace_DC] Pipe:0 0x14328400: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.422605] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.422760] [drm] [IfTrace_DC] Pipe:1 0x1432ae00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.422975] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.423131] [drm] [IfTrace_DC] Pipe:0 0x1432a200: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.423374] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.423585] [drm] [IfTrace_DC] Pipe:1 0x14328400: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.434389] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.434545] [drm] [IfTrace_DC] Pipe:0 0x1432ae00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.434753] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.434908] [drm] [IfTrace_DC] Pipe:1 0x1432a200: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.448711] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.448894] [drm] [IfTrace_DC] Pipe:0 0x16f28200: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.449174] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.449380] [drm] [IfTrace_DC] Pipe:1 0x16f29600: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.465238] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.465432] [drm] [IfTrace_DC] Pipe:0 0x88c3a00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.465725] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.465919] [drm] [IfTrace_DC] Pipe:1 0x88c3c00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.485813] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.485972] [drm] [IfTrace_DC] Pipe:0 0x1432a000: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.486193] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.486350] [drm] [IfTrace_DC] Pipe:1 0x1432b400: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.810976] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.811152] [drm] [IfTrace_DC] Pipe:0 0x16f2a800: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.811367] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.811523] [drm] [IfTrace_DC] Pipe:0 0x16f2aa00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.811728] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.811884] [drm] [IfTrace_DC] Pipe:0 0x16f2a800: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.811967] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.812123] [drm] [IfTrace_DC] Pipe:1 0x16f2ac00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.812328] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.812484] [drm] [IfTrace_DC] Pipe:1 0x16f2ae00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.812688] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.812844] [drm] [IfTrace_DC] Pipe:1 0x16f2ac00: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.960733] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.960891] [drm] [IfTrace_DC] Pipe:0 0x15776000: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.967491] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.967650] [drm] [IfTrace_DC] Pipe:0 0x15776400: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.967890] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.968045] [drm] [IfTrace_DC] Pipe:1 0x15776000: addr hi:0x0, addr low:0x12a6000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.974612] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.974768] [drm] [IfTrace_DC] Pipe:1 0x15776800: addr hi:0x1, addr low:0xfd200000, src: 2560, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.975039] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.975198] [drm] [IfTrace_DC] Pipe:0 0x15776000: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.981756] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 13.981912] [drm] [IfTrace_DC] Pipe:0 0x15776400: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.981970] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.982126] [drm] [IfTrace_DC] Pipe:1 0x15776000: addr hi:0x1, addr low:0xfd200000, src: 2560, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 13.988673] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 13.988829] [drm] [IfTrace_DC] Pipe:1 0x15776800: addr hi:0x1, addr low:0xfd200000, src: 2560, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 14.821613] usb 1-4.5.4: reset high-speed USB device number 8 using ehci-pci [ 14.830214] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.850213] Ebtables v2.0 registered [ 15.057737] device virbr0-nic entered promiscuous mode [ 15.336390] virbr0: port 1(virbr0-nic) entered listening state [ 15.336404] virbr0: port 1(virbr0-nic) entered listening state [ 15.383344] Bluetooth: RFCOMM TTY layer initialized [ 15.383353] Bluetooth: RFCOMM socket layer initialized [ 15.383357] Bluetooth: RFCOMM ver 1.11 [ 15.424613] virbr0: port 1(virbr0-nic) entered disabled state [ 15.427222] device virbr0-nic left promiscuous mode [ 15.427237] virbr0: port 1(virbr0-nic) entered disabled state [ 15.429322] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 15.429573] [drm] [IfTrace_DC] Pipe:0 0x14edce00: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 15.436934] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 15.437128] [drm] [IfTrace_DC] Pipe:1 0x14edee00: addr hi:0x1, addr low:0xfd200000, src: 2560, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 34.552816] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 34.553005] [drm] [IfTrace_DC] Pipe:0 0x14c67a00: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 34.599326] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 34.599522] [drm] [IfTrace_DC] Pipe:1 0x14c67c00: addr hi:0x1, addr low:0xfd200000, src: 2560, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 34.607766] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 34.607926] [drm] [IfTrace_DC] Pipe:0 0x14c66c00: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 53.670399] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53b80 [ 53.670574] [drm] [IfTrace_DC] Pipe:0 0x14c66a00: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 53.677231] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x18e53e60 [ 53.677415] [drm] [IfTrace_DC] Pipe:1 0x14c66200: addr hi:0x1, addr low:0xfd200000, src: 2560, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 487.530263] [drm] Atomic commit: RESET. crtc id 0:[ffff880813e4c000] [ 487.546914] [drm] [IfTrace_DC] dc_commit_targets: 1 targets [ 487.546921] [drm] [IfTrace_DC] core_target 0x18e53e60: stream_count=1 [ 487.546926] [drm] [IfTrace_DC] core_stream 0x15747600: src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 487.546930] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 487.546934] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 171750 [ 487.546937] [drm] [IfTrace_DC] link: 1 [ 487.609036] [drm] [Conn_Mode] [DP-2] {2560x1440, 2720x1481@241500Khz}^ [ 487.609043] [drm] DM_NOT_IMPL: dm_bandwidth_update [ 487.609593] [drm] Atomic commit: RESET. crtc id 0:[ffff880813e4c000] [ 487.609606] [drm] Atomic commit: RESET. crtc id 1:[ffff880813e4d000] [ 487.609626] [drm] [IfTrace_DC] dc_commit_targets: 0 targets [ 487.658971] [drm] DM_NOT_IMPL: dm_bandwidth_update [ 487.659590] [drm] Atomic commit: RESET. crtc id 1:[ffff880813e4d000] [ 607.279364] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.279430] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.279880] [drm] Atomic commit: SET crtc id 0: [ffff880813e4c000] [ 607.279886] [drm] [IfTrace_DC] dc_commit_targets: 1 targets [ 607.279891] [drm] [IfTrace_DC] core_target 0x1782ce60: stream_count=1 [ 607.279895] [drm] [IfTrace_DC] core_stream 0x15f3e800: src: 0, 0, 0, 0; dst: 0, 0, 0, 0; [ 607.279899] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 607.279902] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 237902 [ 607.279905] [drm] [IfTrace_DC] link: 0 [ 607.281039] [drm] [Detection_DP caps] Link: 0 eDP panel mode supported: 0 eDP panel mode enabled: 0 [ 607.285725] [drm] [Conn_LKTN] [DP-1] HBRx4 fail VS=0, PE=0^ [ 607.342693] [drm] [Conn_LKTN] [DP-1] HBRx4 pass VS=0, PE=0^ [ 607.343308] [drm] [Conn_Mode] [DP-1] {2560x1440, 2720x1481@241500Khz}^ [ 607.343314] [drm] DM_NOT_IMPL: dm_bandwidth_update [ 607.343867] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x1782ce60 [ 607.344149] [drm] [IfTrace_DC] Pipe:0 0x88c1000: addr hi:0x1, addr low:0xfd200000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 607.344363] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.344426] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.344518] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.344579] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.344665] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.344728] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.344817] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.344879] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.344963] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.345024] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.345108] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.345169] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.345752] [drm:dc_target_set_cursor_position [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.345813] [drm:dm_crtc_cursor_move [amdgpu]] *ERROR* DC failed to set cursor position [ 607.345897] [drm:dc_target_set_cursor_attributes [amdgpu]] *ERROR* DC: dc_target is NULL! [ 607.345969] [drm:dm_set_cursor [amdgpu]] *ERROR* DC failed to set cursor attributes [ 607.346407] [drm] Atomic commit: SET crtc id 1: [ffff880813e4d000] [ 607.346412] [drm] [IfTrace_DC] dc_commit_targets: 2 targets [ 607.346417] [drm] [IfTrace_DC] core_target 0x1782ce60: stream_count=1 [ 607.346422] [drm] [IfTrace_DC] core_stream 0x15f3e800: src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 607.346425] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 607.346429] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 237902 [ 607.346432] [drm] [IfTrace_DC] link: 0 [ 607.346435] [drm] [IfTrace_DC] core_target 0xccb26e20: stream_count=1 [ 607.346439] [drm] [IfTrace_DC] core_stream 0x88c1400: src: 0, 0, 0, 0; dst: 0, 0, 0, 0; [ 607.346442] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 607.346445] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 171750 [ 607.346448] [drm] [IfTrace_DC] link: 1 [ 607.347858] [drm] [Detection_DP caps] Link: 1 eDP panel mode supported: 0 eDP panel mode enabled: 0 [ 607.352537] [drm] [Conn_LKTN] [DP-2] HBRx4 fail VS=0, PE=0^ [ 607.410694] [drm] [Conn_LKTN] [DP-2] HBRx4 pass VS=0, PE=0^ [ 607.411360] [drm] [Conn_Mode] [DP-1] {2560x1440, 2720x1481@241500Khz}^ [ 607.411366] [drm] [Conn_Mode] [DP-2] {2560x1440, 2720x1481@241500Khz}^ [ 607.411369] [drm] [Sync_Timing] GSL: Setting-up... [ 607.411378] [drm] [Sync_Timing] GSL: enabling trigger-reset [ 607.411384] [drm] [Sync_Timing] GSL: waiting for reset to occur. [ 607.430624] [drm] [Sync_Timing] GSL: reset occurred at wait count: 2 [ 607.430629] [drm] [Sync_Timing] GSL: disabling trigger-reset. [ 607.430634] [drm] [Sync_Timing] GSL: Restoring register states. [ 607.430639] [drm] [Sync_Timing] GSL: Set-up complete. [ 607.430644] [drm] DM_NOT_IMPL: dm_bandwidth_update [ 607.431850] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0xccb26e20 [ 607.432223] [drm] [IfTrace_DC] Pipe:1 0xa9ad1800: addr hi:0x1, addr low:0xfd200000, src: 2560, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 608.716346] [drm] [HwTrace_Hotplug] link=0, dc_sink_in= (null) is now Disconnected [ 608.716353] [drm] DCHPD: connector_id=0: Old sink=ffff880812579400 New sink= (null) [ 608.733820] [drm] Atomic commit: RESET. crtc id 1:[ffff880813e4d000] [ 608.733848] [drm] [IfTrace_DC] dc_commit_targets: 1 targets [ 608.733856] [drm] [IfTrace_DC] core_target 0x1782ce60: stream_count=1 [ 608.733862] [drm] [IfTrace_DC] core_stream 0x15f3e800: src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 608.733867] [drm] [IfTrace_DC] pix_clk_khz: 241500, h_total: 2720, v_total: 1481 [ 608.733872] [drm] [IfTrace_DC] sink name: ASUS PB278, serial: 237902 [ 608.733876] [drm] [IfTrace_DC] link: 0 [ 608.785970] [drm] [HwTrace_Hotplug] link=1, dc_sink_in= (null) is now Disconnected [ 608.785975] [drm] DCHPD: connector_id=1: Old sink=ffff88081257b400 New sink= (null) [ 608.798606] [drm] [Conn_Mode] [DP-1] {2560x1440, 2720x1481@241500Khz}^ [ 608.798613] [drm] DM_NOT_IMPL: dm_bandwidth_update [ 608.798974] [drm] Atomic commit: RESET. crtc id 1:[ffff880813e4d000] [ 608.799498] [drm] [Conn_Detect] [DP-1] Rx Caps: 12 0A 84 01 01 00 01 00 02 02 06 00 04 00 00 ^ [ 608.801671] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x1782ce60 [ 608.801790] [drm] [IfTrace_DC] Pipe:0 0x93764600: addr hi:0x1, addr low:0xf3aa0000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 608.803926] [drm] [Conn_LKTN] [DP-1] HBRx4 pass VS=0, PE=0^ [ 608.808356] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x1782ce60 [ 608.808463] [drm] [IfTrace_DC] Pipe:0 0x93764000: addr hi:0x1, addr low:0xe5da0000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 608.809100] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x1782ce60 [ 608.809212] [drm] [IfTrace_DC] Pipe:0 0x93767e00: addr hi:0x1, addr low:0xe5da0000, src: 0, 0, 2560, 1440; dst: 0, 0, 2560, 1440; [ 608.814730] [drm] [Conn_Detect] [DP-1] ASUS PB278: [Block 0] 00 FF FF FF FF FF FF 00 04 69 A3 27 4E A1 03 00 1F 17 01 04 A5 3C 22 78 3A A5 95 AA 54 4F A1 26 0A 50 54 B7 EF 00 D1 C0 B3 00 95 00 81 80 81 40 81 00 81 C0 71 4F 56 5E 00 A0 A0 A0 29 50 30 20 35 00 55 50 21 00 00 1A 00 00 00 FF 00 44 37 4C 4D 54 46 32 33 37 39 30 32 0A 00 00 00 FD 00 18 4C 18 63 1E 04 11 01 40 F8 38 F0 3C 00 00 00 FC 00 41 53 55 53 20 50 42 32 37 38 0A 20 20 01 4C ^ [ 608.814745] [drm] [Conn_Detect] [DP-1] ASUS PB278: [Block 1] 02 03 22 71 4F 01 02 03 11 12 13 04 14 05 1F 90 0E 0F 1D 1E 23 09 17 07 83 01 00 00 65 6E 0C 00 10 00 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 55 50 21 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 55 00 55 50 21 00 00 1E 01 1D 00 BC 52 D0 1E 20 B8 28 55 40 55 50 21 00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00 55 50 21 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 96 ^ [ 608.814748] [drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = 6904, product_id = 27A3, serial_number = 3A14E, manufacture_week = 31, manufacture_year = 23, display_name = ASUS PB278, speaker_flag = 1, audio_mode_count = 1 [ 608.814750] [drm] [Detection_EDID Parser] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 23, sample_size = 7 [ 608.814752] [drm] [HwTrace_Hotplug] link=0, dc_sink_in=ffff8807ca0d5000 is now Connected [ 608.814754] [drm] DCHPD: connector_id=0: Old sink= (null) New sink=ffff8807ca0d5000 [ 608.815664] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 608.815711] IP: [] resource_map_pool_resources+0x4d4/0x730 [amdgpu] [ 608.815800] PGD 0 [ 608.815811] Oops: 0000 [#1] SMP [ 608.815828] Modules linked in: rfcomm xt_CHECKSUM iptable_mangle ipt_REJECT nf_reject_ipv4 xt_tcpudp ebtable_filter ebtables ip6table_filter ip6_tables rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache ipt_MASQUERADE nf_nat_masquerade_ipv4 usblp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack br_netfilter bridge stp llc aufs bnep btusb btrtl btbcm btintel bluetooth binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core joydev v4l2_common snd_usb_audio videodev snd_usbmidi_lib media arc4 crct10dif_pclmul crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd ath5k snd_hda_codec_realtek ath serio_raw snd_hda_codec_generic snd_hda_codec_hdmi mac80211 [ 608.816175] edac_mce_amd snd_hda_intel fam15h_power edac_core k10temp snd_hda_codec cfg80211 snd_hda_core snd_hwdep input_leds snd_pcm snd_seq_midi i2c_piix4 snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd 8250_fintek soundcore nuvoton_cir rc_core shpchp mac_hid kvm_amd kvm irqbypass sunrpc parport_pc ppdev lp parport autofs4 hid_generic usbhid hid uas usb_storage amdkfd mxm_wmi amd_iommu_v2 amdgpu(OE) i2c_algo_bit ttm drm_kms_helper psmouse syscopyarea sysfillrect sysimgblt r8169 fb_sys_fops mii e1000e drm ahci libahci ptp pps_core fjes wmi [ 608.816445] CPU: 6 PID: 1840 Comm: Xorg Tainted: G OE 4.4.0-36-generic #55-Ubuntu [ 608.816482] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./970 Extreme4, BIOS P2.80 08/05/2015 [ 608.816523] task: ffff8808097b0dc0 ti: ffff8808094b8000 task.ti: ffff8808094b8000 [ 608.816555] RIP: 0010:[] [] resource_map_pool_resources+0x4d4/0x730 [amdgpu] [ 608.816629] RSP: 0018:ffff8808094bb838 EFLAGS: 00010282 [ 608.816651] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 0000000000000006 [ 608.816681] RDX: ffff880812c70b80 RSI: 0000000000000006 RDI: ffff880815f3e800 [ 608.816710] RBP: ffff8808094bb888 R08: 00000000ffffffe0 R09: 00000000000000b4 [ 608.816740] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 608.816770] R13: ffff8807937bc000 R14: ffff88081a913800 R15: ffff880793764000 [ 608.816800] FS: 00007fa02a66ba00(0000) GS:ffff88083ed80000(0000) knlGS:0000000000000000 [ 608.816834] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 608.816858] CR2: 00000000000000a0 CR3: 0000000815995000 CR4: 00000000000406e0 [ 608.816887] Stack: [ 608.816896] ffff8807937bc008 00000001094bbaa0 ffff8807937bc000 ffff8807937bc000 [ 608.816928] ffff880700000000 ffff88081a973080 ffff88081a913800 ffff8807937bc000 [ 608.816960] ffff8808094bba58 0000000000000001 ffff8808094bb8d0 ffffffffc0374301 [ 608.816992] Call Trace: [ 608.817035] [] dce112_validate_with_context+0x91/0x220 [amdgpu] [ 608.817098] [] dc_validate_resources+0x4e/0xb0 [amdgpu] [ 608.817154] [] amdgpu_dm_atomic_check+0x640/0x6f0 [amdgpu] [ 608.817223] [] drm_atomic_check_only+0x18e/0x590 [drm] [ 608.817262] [] ? drm_atomic_set_crtc_for_connector+0x6f/0xe0 [drm] [ 608.817306] [] drm_atomic_commit+0x17/0x60 [drm] [ 608.817340] [] drm_atomic_helper_set_config+0x76/0xb0 [drm_kms_helper] [ 608.817384] [] drm_mode_set_config_internal+0x62/0x100 [drm] [ 608.817424] [] drm_mode_setcrtc+0x3cc/0x4f0 [drm] [ 608.817459] [] drm_ioctl+0x152/0x540 [drm] [ 608.817486] [] ? __set_task_blocked+0x41/0xa0 [ 608.817521] [] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [ 608.817569] [] amdgpu_drm_ioctl+0x4c/0x80 [amdgpu] [ 608.817598] [] do_vfs_ioctl+0x29f/0x490 [ 608.817622] [] ? fpu__restore_sig+0x4d/0x60 [ 608.817647] [] SyS_ioctl+0x79/0x90 [ 608.817670] [] entry_SYSCALL_64_fastpath+0x16/0x71 [ 608.817696] Code: 84 61 01 00 00 8d 4e ff 31 c0 bb ff ff ff ff 48 83 c1 01 41 80 bc 05 44 0e 00 00 00 75 22 49 8b 94 c5 20 02 00 00 48 85 d2 74 15 <49> 8b ba a0 00 00 00 8b 5f 30 39 5a 18 0f 84 9a 00 00 00 89 c3 [ 608.817838] RIP [] resource_map_pool_resources+0x4d4/0x730 [amdgpu] [ 608.817903] RSP [ 608.817917] CR2: 00000000000000a0 [ 608.838667] ---[ end trace a1c0a92d074baf4b ]--- [ 657.207501] usb 1-3.4: USB disconnect, device number 4 [ 657.207754] usblp4: removed [ 658.369209] usb 1-4: USB disconnect, device number 3 [ 658.369216] usb 1-4.5: USB disconnect, device number 5 [ 658.369220] usb 1-4.5.2: USB disconnect, device number 6 [ 658.401944] usb 1-4.5.3: USB disconnect, device number 7 [ 658.545555] usb 1-4.5.4: USB disconnect, device number 8 [ 671.253860] usb 1-4: new high-speed USB device number 9 using ehci-pci [ 671.386478] usb 1-4: New USB device found, idVendor=1a40, idProduct=0201 [ 671.386484] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 671.386488] usb 1-4: Product: USB 2.0 Hub [MTT] [ 671.386921] hub 1-4:1.0: USB hub found [ 671.386974] hub 1-4:1.0: 7 ports detected [ 671.657873] usb 1-4.5: new high-speed USB device number 10 using ehci-pci [ 671.750449] usb 1-4.5: New USB device found, idVendor=1a40, idProduct=0101 [ 671.750455] usb 1-4.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 671.750459] usb 1-4.5: Product: USB 2.0 Hub [MTT] [ 671.750910] hub 1-4.5:1.0: USB hub found [ 671.751068] hub 1-4.5:1.0: 4 ports detected [ 672.021872] usb 1-4.5.2: new low-speed USB device number 11 using ehci-pci [ 672.118405] usb 1-4.5.2: New USB device found, idVendor=04b4, idProduct=0033 [ 672.118411] usb 1-4.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 672.124020] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.2/1-4.5.2:1.0/0003:04B4:0033.0009/input/input22 [ 672.124361] hid-generic 0003:04B4:0033.0009: input,hidraw5: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:12.2-4.5.2/input0 [ 672.193887] usb 1-4.5.3: new low-speed USB device number 12 using ehci-pci [ 672.299137] usb 1-4.5.3: New USB device found, idVendor=046a, idProduct=0021 [ 672.299143] usb 1-4.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 672.309847] input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.3/1-4.5.3:1.0/0003:046A:0021.000A/input/input23 [ 672.366333] hid-generic 0003:046A:0021.000A: input,hidraw6: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:12.2-4.5.3/input0 [ 672.377234] input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.3/1-4.5.3:1.1/0003:046A:0021.000B/input/input24 [ 672.430144] hid-generic 0003:046A:0021.000B: input,hidraw7: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:12.2-4.5.3/input1 [ 672.501890] usb 1-4.5.4: new high-speed USB device number 13 using ehci-pci [ 673.704138] usb 1-4.5.4: New USB device found, idVendor=046d, idProduct=082d [ 673.704145] usb 1-4.5.4: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 673.704149] usb 1-4.5.4: Product: HD Pro Webcam C920 [ 673.704152] usb 1-4.5.4: SerialNumber: 9EAC20FF [ 673.704605] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 673.705555] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.4/1-4.5.4:1.0/input/input25 [ 674.720075] usb 1-4: USB disconnect, device number 9 [ 674.720082] usb 1-4.5: USB disconnect, device number 10 [ 674.720087] usb 1-4.5.2: USB disconnect, device number 11 [ 674.754403] usb 1-4.5.3: USB disconnect, device number 12 [ 674.870012] usb 1-4.5.4: USB disconnect, device number 13 [ 678.341807] [drm] amdgpu_dm_irq_schedule_work FAILED src 4 [ 678.760071] [drm] amdgpu_dm_irq_schedule_work FAILED src 6 [ 678.790073] [drm] amdgpu_dm_irq_schedule_work FAILED src 4 [ 679.031128] [drm] amdgpu_dm_irq_schedule_work FAILED src 6 [ 679.205878] [drm] amdgpu_dm_irq_schedule_work FAILED src 4 [ 681.006103] usb 1-4: new high-speed USB device number 14 using ehci-pci [ 681.138732] usb 1-4: New USB device found, idVendor=1a40, idProduct=0201 [ 681.138738] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 681.138742] usb 1-4: Product: USB 2.0 Hub [MTT] [ 681.139175] hub 1-4:1.0: USB hub found [ 681.139227] hub 1-4:1.0: 7 ports detected [ 681.410116] usb 1-4.5: new high-speed USB device number 15 using ehci-pci [ 681.502702] usb 1-4.5: New USB device found, idVendor=1a40, idProduct=0101 [ 681.502708] usb 1-4.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 681.502712] usb 1-4.5: Product: USB 2.0 Hub [MTT] [ 681.503169] hub 1-4.5:1.0: USB hub found [ 681.503322] hub 1-4.5:1.0: 4 ports detected [ 681.630139] [drm] amdgpu_dm_irq_schedule_work FAILED src 4 [ 681.774116] usb 1-4.5.2: new low-speed USB device number 16 using ehci-pci [ 681.870534] usb 1-4.5.2: New USB device found, idVendor=04b4, idProduct=0033 [ 681.870540] usb 1-4.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 681.875582] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.2/1-4.5.2:1.0/0003:04B4:0033.000C/input/input26 [ 681.875859] hid-generic 0003:04B4:0033.000C: input,hidraw5: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:12.2-4.5.2/input0 [ 681.946118] usb 1-4.5.3: new low-speed USB device number 17 using ehci-pci [ 682.051270] usb 1-4.5.3: New USB device found, idVendor=046a, idProduct=0021 [ 682.051276] usb 1-4.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 682.062906] input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.3/1-4.5.3:1.0/0003:046A:0021.000D/input/input27 [ 682.118576] hid-generic 0003:046A:0021.000D: input,hidraw6: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:12.2-4.5.3/input0 [ 682.129247] input: HID 046a:0021 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.3/1-4.5.3:1.1/0003:046A:0021.000E/input/input28 [ 682.182393] hid-generic 0003:046A:0021.000E: input,hidraw7: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:12.2-4.5.3/input1 [ 682.254128] usb 1-4.5.4: new high-speed USB device number 18 using ehci-pci [ 682.280201] [drm] amdgpu_dm_irq_schedule_work FAILED src 6 [ 683.456516] usb 1-4.5.4: New USB device found, idVendor=046d, idProduct=082d [ 683.456523] usb 1-4.5.4: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 683.456527] usb 1-4.5.4: Product: HD Pro Webcam C920 [ 683.456530] usb 1-4.5.4: SerialNumber: 9EAC20FF [ 683.457003] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 683.457887] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.5/1-4.5.4/1-4.5.4:1.0/input/input29 [ 686.110219] usb 1-3.4: new full-speed USB device number 19 using ehci-pci [ 686.220021] usb 1-3.4: New USB device found, idVendor=04f9, idProduct=01e4 [ 686.220028] usb 1-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=3 [ 686.220032] usb 1-3.4: SerialNumber: BROG8F793058 [ 686.221492] usblp 1-3.4:1.0: usblp4: USB Bidirectional printer dev 19 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4 [ 686.221782] usb-storage 1-3.4:1.2: USB Mass Storage device detected [ 686.221980] scsi host8: usb-storage 1-3.4:1.2 [ 687.260816] scsi 8:0:0:0: Direct-Access Brother DCP-357C 1.00 PQ: 0 ANSI: 2 [ 687.261330] sd 8:0:0:0: Attached scsi generic sg9 type 0 [ 687.340684] sd 8:0:0:0: [sdi] Attached SCSI removable disk [ 692.342498] usblp4: removed [ 692.344750] usblp 1-3.4:1.0: usblp4: USB Bidirectional printer dev 19 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4 [ 698.682815] [drm] amdgpu_dm_irq_schedule_work FAILED src 6 [ 699.130834] [drm] amdgpu_dm_irq_schedule_work FAILED src 6 [ 770.938153] [drm] amdgpu_dm_irq_schedule_work FAILED src 6 [ 770.987907] [drm] amdgpu_dm_irq_schedule_work FAILED src 4 [ 771.383537] [drm] amdgpu_dm_irq_schedule_work FAILED src 6 [ 771.443540] [drm] amdgpu_dm_irq_schedule_work FAILED src 4 [ 1029.200801] do_trap: 51 callbacks suppressed [ 1029.200806] traps: unity-control-c[4038] trap int3 ip:7fcd35972a6b sp:7ffd29a0d9d0 error:0 [ 1034.064828] traps: unity-control-c[4047] trap int3 ip:7fba29caaa6b sp:7ffc979e0f20 error:0 [ 1055.816491] traps: unity-control-c[4086] trap int3 ip:7fcd64c22a6b sp:7ffeb9748380 error:0 [ 1160.873073] traps: unity-control-c[4100] trap int3 ip:7f770c5faa6b sp:7ffd6886efc0 error:0 [ 1575.619528] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1575.632924] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1575.646406] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 1575.667484] QNX4 filesystem 0.2.3 registered. [ 1575.743000] raid6: sse2x1 gen() 3186 MB/s [ 1575.811005] raid6: sse2x1 xor() 2947 MB/s [ 1575.879000] raid6: sse2x2 gen() 6133 MB/s [ 1575.947004] raid6: sse2x2 xor() 4692 MB/s [ 1576.015000] raid6: sse2x4 gen() 8052 MB/s [ 1576.083006] raid6: sse2x4 xor() 4735 MB/s [ 1576.083008] raid6: using algorithm sse2x4 gen() 8052 MB/s [ 1576.083010] raid6: .... xor() 4735 MB/s, rmw enabled [ 1576.083012] raid6: using ssse3x2 recovery algorithm [ 1576.085769] xor: automatically using best checksumming function: [ 1576.123002] avx : 5603.000 MB/sec [ 1576.152017] Btrfs loaded [ 1577.064694] EXT4-fs (sdb2): VFS: Can't find ext4 filesystem [ 1577.066486] EXT4-fs (sdb2): VFS: Can't find ext4 filesystem [ 1577.068420] EXT4-fs (sdb2): VFS: Can't find ext4 filesystem [ 1577.070873] squashfs: SQUASHFS error: Can't find a SQUASHFS superblock on sdb2 [ 1577.072811] FAT-fs (sdb2): bogus number of reserved sectors [ 1577.072815] FAT-fs (sdb2): Can't find a valid FAT filesystem [ 1577.078988] XFS (sdb2): Invalid superblock magic number [ 1577.083653] FAT-fs (sdb2): bogus number of reserved sectors [ 1577.083657] FAT-fs (sdb2): Can't find a valid FAT filesystem [ 1577.089311] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sdb2. [ 1577.095395] hfsplus: unable to find HFS+ superblock [ 1577.097527] qnx4: no qnx4 filesystem (no root dir). [ 1577.099843] ufs: You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 1577.100010] ufs: ufs_fill_super(): bad magic number [ 1577.104828] hfs: can't find a HFS filesystem on dev sdb2 [ 1597.929725] EXT4-fs (sdb2): VFS: Can't find ext4 filesystem [ 1597.931294] EXT4-fs (sdb2): VFS: Can't find ext4 filesystem [ 1597.933438] EXT4-fs (sdb2): VFS: Can't find ext4 filesystem [ 1597.935904] squashfs: SQUASHFS error: Can't find a SQUASHFS superblock on sdb2 [ 1597.937882] FAT-fs (sdb2): bogus number of reserved sectors [ 1597.937885] FAT-fs (sdb2): Can't find a valid FAT filesystem [ 1597.945480] XFS (sdb2): Invalid superblock magic number [ 1597.949065] FAT-fs (sdb2): bogus number of reserved sectors [ 1597.949068] FAT-fs (sdb2): Can't find a valid FAT filesystem [ 1597.954754] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sdb2. [ 1597.956715] hfsplus: unable to find HFS+ superblock [ 1597.958646] qnx4: no qnx4 filesystem (no root dir). [ 1597.960406] ufs: You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old [ 1597.960563] ufs: ufs_fill_super(): bad magic number [ 1597.964913] hfs: can't find a HFS filesystem on dev sdb2 [ 3045.098316] usb 1-3.4: USB disconnect, device number 19 [ 3045.098574] usblp4: removed [ 3046.038810] usb 1-4.5.4: reset high-speed USB device number 18 using ehci-pci [ 3051.402858] usb 1-3.4: new full-speed USB device number 20 using ehci-pci [ 3051.512596] usb 1-3.4: New USB device found, idVendor=04f9, idProduct=01e4 [ 3051.512602] usb 1-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=3 [ 3051.512606] usb 1-3.4: SerialNumber: BROG8F793058 [ 3051.513965] usblp 1-3.4:1.0: usblp4: USB Bidirectional printer dev 20 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4 [ 3051.514264] usb-storage 1-3.4:1.2: USB Mass Storage device detected [ 3051.514469] scsi host9: usb-storage 1-3.4:1.2 [ 3052.554005] scsi 9:0:0:0: Direct-Access Brother DCP-357C 1.00 PQ: 0 ANSI: 2 [ 3052.554416] sd 9:0:0:0: Attached scsi generic sg9 type 0 [ 3052.643991] sd 9:0:0:0: [sdi] Attached SCSI removable disk [ 3057.717532] usblp4: removed [ 3057.719860] usblp 1-3.4:1.0: usblp4: USB Bidirectional printer dev 20 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01E4