[ 0.000000] Linux version 4.7.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.7.2-1~bpo8+1 (2016-09-07) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.7.0-0.bpo.1-amd64 root=/dev/mapper/p35--vg-root ro log_buf_len=1M quiet [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3L/P35-DS3L, BIOS F9 06/19/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask FE0000000 write-back [ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f50a0-0x000f50af] mapped at [ffff8800000f50a0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] BRK [0x06b6d000, 0x06b6dfff] PGTABLE [ 0.000000] BRK [0x06b6e000, 0x06b6efff] PGTABLE [ 0.000000] BRK [0x06b6f000, 0x06b6ffff] PGTABLE [ 0.000000] BRK [0x06b70000, 0x06b70fff] PGTABLE [ 0.000000] BRK [0x06b71000, 0x06b71fff] PGTABLE [ 0.000000] BRK [0x06b72000, 0x06b72fff] PGTABLE [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 127984(97%) [ 0.000000] RAMDISK: [mem 0x35d1a000-0x36e84fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6A70 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000DFEE3040 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000DFEE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000DFEE3180 004B27 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000DFEE0000 000040 [ 0.000000] ACPI: HPET 0x00000000DFEE7E00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000DFEE7E80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0x00000000DFEE7D00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000DFEE8520 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21fef5000-0x21fef9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfedffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff] [ 0.000000] On node 0 totalpages: 2096764 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14268 pages used for memmap [ 0.000000] DMA32 zone: 913120 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xdff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88021fc00000 s99608 r8192 d31464 u524288 [ 0.000000] pcpu-alloc: s99608 r8192 d31464 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063979 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.7.0-0.bpo.1-amd64 root=/dev/mapper/p35--vg-root ro log_buf_len=1M quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8156380K/8387056K available (6012K kernel code, 1166K rwdata, 2764K rodata, 1368K init, 936K bss, 230676K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2666.682 MHz processor [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.36 BogoMIPS (lpj=10666728) [ 0.004014] pid_max: default: 32768 minimum: 301 [ 0.004030] ACPI: Core revision 20160422 [ 0.010687] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.010744] Security Framework initialized [ 0.010747] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.010754] AppArmor: AppArmor disabled by boot time parameter [ 0.011301] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.015262] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.017071] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.017084] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.017519] CPU: Physical Processor ID: 0 [ 0.017521] CPU: Processor Core ID: 0 [ 0.017524] mce: CPU supports 6 MCE banks [ 0.017532] CPU0: Thermal monitoring enabled (TM2) [ 0.017536] process: using mwait in idle threads [ 0.017542] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.017544] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.017868] Freeing SMP alternatives memory: 24K (ffffffff86a7b000 - ffffffff86a81000) [ 0.020012] ftrace: allocating 24737 entries in 97 pages [ 0.028093] smpboot: Max logical packages: 2 [ 0.028097] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.028458] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (family: 0x6, model: 0xf, stepping: 0xb) [ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072000] core: PEBS disabled due to CPU errata [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072000] x86: Booting SMP configuration: [ 0.072000] .... node #0, CPUs: #1 [ 0.150027] x86: Booted up 1 node, 2 CPUs [ 0.150027] smpboot: Total of 2 processors activated (10666.65 BogoMIPS) [ 0.160044] devtmpfs: initialized [ 0.160103] x86/mm: Memory block size: 128MB [ 0.172047] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes) [ 0.172124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.184013] pinctrl core: initialized pinctrl subsystem [ 0.196122] NET: Registered protocol family 16 [ 0.208003] cpuidle: using governor ladder [ 0.212004] cpuidle: using governor menu [ 0.212051] ACPI: bus type PCI registered [ 0.212053] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.228079] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.228082] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.228090] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override. [ 0.228206] PCI: Using configuration type 1 for base access [ 0.236072] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.260063] ACPI: Added _OSI(Module Device) [ 0.260066] ACPI: Added _OSI(Processor Device) [ 0.260068] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.260070] ACPI: Added _OSI(Processor Aggregator Device) [ 0.263517] ACPI: Dynamic OEM Table Load: [ 0.263525] ACPI: SSDT 0xFFFF8802163F5800 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.263783] ACPI: Dynamic OEM Table Load: [ 0.263787] ACPI: SSDT 0xFFFF88021639A400 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.264200] ACPI: Interpreter enabled [ 0.264218] ACPI: (supports S0 S3 S4 S5) [ 0.264220] ACPI: Using IOAPIC for interrupt routing [ 0.264248] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.269143] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.269149] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.269154] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.269389] PCI host bridge to bus 0000:00 [ 0.269392] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.269394] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.269396] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.269398] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.269400] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff window] [ 0.269402] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.269410] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.269514] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.269547] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.269648] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.269683] pci 0000:00:1a.0: reg 0x20: [io 0xe100-0xe11f] [ 0.269760] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.269806] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.269841] pci 0000:00:1a.1: reg 0x20: [io 0xe200-0xe21f] [ 0.269917] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.269965] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.270000] pci 0000:00:1a.2: reg 0x20: [io 0xe000-0xe01f] [ 0.270075] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.270124] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.270138] pci 0000:00:1a.7: reg 0x10: [mem 0xfb004000-0xfb0043ff] [ 0.270243] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.270291] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.270306] pci 0000:00:1b.0: reg 0x10: [mem 0xfb000000-0xfb003fff 64bit] [ 0.270366] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.270417] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.270463] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.270521] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.270571] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.270619] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.270677] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.270727] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.270773] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.270832] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.270883] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.270930] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.270965] pci 0000:00:1d.0: reg 0x20: [io 0xe300-0xe31f] [ 0.271040] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.271085] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.271120] pci 0000:00:1d.1: reg 0x20: [io 0xe400-0xe41f] [ 0.271195] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.271240] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.271275] pci 0000:00:1d.2: reg 0x20: [io 0xe500-0xe51f] [ 0.271350] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.271399] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.271413] pci 0000:00:1d.7: reg 0x10: [mem 0xfb005000-0xfb0053ff] [ 0.271519] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.271563] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.271646] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.271693] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.271762] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.271766] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.271770] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.271773] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.271879] pci 0000:00:1f.2: [8086:2923] type 00 class 0x010601 [ 0.271892] pci 0000:00:1f.2: reg 0x10: [io 0xe600-0xe607] [ 0.271899] pci 0000:00:1f.2: reg 0x14: [io 0xe700-0xe703] [ 0.271905] pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807] [ 0.271912] pci 0000:00:1f.2: reg 0x1c: [io 0xe900-0xe903] [ 0.271918] pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea1f] [ 0.271925] pci 0000:00:1f.2: reg 0x24: [mem 0xfb006000-0xfb0067ff] [ 0.271960] pci 0000:00:1f.2: PME# supported from D3hot [ 0.272051] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.272064] pci 0000:00:1f.3: reg 0x10: [mem 0xfb007000-0xfb0070ff 64bit] [ 0.272081] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.272212] pci 0000:01:00.0: [10de:0193] type 00 class 0x030000 [ 0.272221] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.272230] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.272238] pci 0000:01:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.272244] pci 0000:01:00.0: reg 0x24: [io 0xb000-0xb07f] [ 0.272250] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.272318] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.272324] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.272326] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.272329] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.272333] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.272375] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.272379] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.272456] pci 0000:03:00.0: [197b:2368] type 00 class 0x010185 [ 0.272486] pci 0000:03:00.0: reg 0x10: [io 0xc000-0xc007] [ 0.272499] pci 0000:03:00.0: reg 0x14: [io 0xc100-0xc103] [ 0.272511] pci 0000:03:00.0: reg 0x18: [io 0xc200-0xc207] [ 0.272524] pci 0000:03:00.0: reg 0x1c: [io 0xc300-0xc303] [ 0.272537] pci 0000:03:00.0: reg 0x20: [io 0xc400-0xc40f] [ 0.272666] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.272675] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.272678] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.272681] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf8ffffff] [ 0.272743] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.272763] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.272791] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa000fff 64bit] [ 0.272824] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.272908] pci 0000:04:00.0: supports D1 D2 [ 0.272910] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.272977] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.272985] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.272988] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.272992] pci 0000:00:1c.4: bridge window [mem 0xf9000000-0xfaffffff] [ 0.273061] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.273064] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 0.273071] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.273073] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.273075] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.273077] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.273079] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff window] (subtractive decode) [ 0.273663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.273721] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.273778] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.273834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.273889] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.273946] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.274001] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.274057] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.276018] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.276018] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.276018] vgaarb: loaded [ 0.276018] vgaarb: bridge control possible 0000:01:00.0 [ 0.276074] PCI: Using ACPI for IRQ routing [ 0.277156] PCI: pci_cache_line_size set to 64 bytes [ 0.277201] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.277203] e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff] [ 0.277368] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.277373] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.277377] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.279392] amd_nb: Cannot enumerate AMD northbridges [ 0.279392] clocksource: Switched to clocksource hpet [ 0.283777] VFS: Disk quotas dquot_6.6.0 [ 0.292034] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.304114] pnp: PnP ACPI init [ 0.304333] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.304336] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.304338] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.304340] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.304342] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.304347] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304426] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.304544] pnp 00:02: [dma 2] [ 0.304580] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.304778] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.305032] pnp 00:04: [dma 3] [ 0.305078] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.305173] system 00:05: [io 0x0400-0x04bf] could not be reserved [ 0.305176] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.305382] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.305385] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.305570] system 00:07: [mem 0x000d2800-0x000d3fff] has been reserved [ 0.305573] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.305576] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.305578] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.305580] system 00:07: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.305582] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.305585] system 00:07: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.305587] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.305589] system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.305591] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.305593] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.305595] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.305597] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.305599] system 00:07: [mem 0x000e0000-0x000effff] has been reserved [ 0.305603] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.305608] pnp: PnP ACPI: found 8 devices [ 0.312119] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.312138] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.312141] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.312148] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.312156] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.312167] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.312169] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.312172] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.312174] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.312176] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.312178] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.312180] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.312183] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.312188] pci 0000:00:1c.0: BAR 14: assigned [mem 0xfb100000-0xfb2fffff] [ 0.312193] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfb300000-0xfb4fffff 64bit pref] [ 0.312197] pci 0000:00:1c.3: BAR 15: assigned [mem 0xfb500000-0xfb6fffff 64bit pref] [ 0.312201] pci 0000:00:1c.4: BAR 15: assigned [mem 0xfb700000-0xfb8fffff 64bit pref] [ 0.312205] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref] [ 0.312207] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.312210] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.312213] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.312216] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.312219] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.312222] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.312226] pci 0000:00:1c.0: bridge window [mem 0xfb100000-0xfb2fffff] [ 0.312229] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb4fffff 64bit pref] [ 0.312234] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.312236] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.312240] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf8ffffff] [ 0.312243] pci 0000:00:1c.3: bridge window [mem 0xfb500000-0xfb6fffff 64bit pref] [ 0.312249] pci 0000:04:00.0: BAR 6: assigned [mem 0xf9000000-0xf901ffff pref] [ 0.312251] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.312254] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.312258] pci 0000:00:1c.4: bridge window [mem 0xf9000000-0xfaffffff] [ 0.312261] pci 0000:00:1c.4: bridge window [mem 0xfb700000-0xfb8fffff 64bit pref] [ 0.312266] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.312268] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 0.312278] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.312280] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.312282] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.312284] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.312286] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff window] [ 0.312287] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.312289] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.312291] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.312293] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.312295] pci_bus 0000:02: resource 1 [mem 0xfb100000-0xfb2fffff] [ 0.312297] pci_bus 0000:02: resource 2 [mem 0xfb300000-0xfb4fffff 64bit pref] [ 0.312299] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.312300] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf8ffffff] [ 0.312302] pci_bus 0000:03: resource 2 [mem 0xfb500000-0xfb6fffff 64bit pref] [ 0.312304] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.312306] pci_bus 0000:04: resource 1 [mem 0xf9000000-0xfaffffff] [ 0.312308] pci_bus 0000:04: resource 2 [mem 0xfb700000-0xfb8fffff 64bit pref] [ 0.312310] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] [ 0.312312] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.312313] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.312315] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.312317] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.312319] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff window] [ 0.372023] NET: Registered protocol family 2 [ 0.384091] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.384310] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.384625] TCP: Hash tables configured (established 65536 bind 65536) [ 0.384668] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.384715] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.408023] NET: Registered protocol family 1 [ 0.409049] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.409057] PCI: CLS 32 bytes, default 64 [ 0.409115] Unpacking initramfs... [ 0.734943] Freeing initrd memory: 17836K (ffff880035d1a000 - ffff880036e85000) [ 0.734951] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.734953] software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff8800dbee0000-ffff8800dfedffff] [ 0.748249] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.764025] audit: initializing netlink subsys (disabled) [ 0.764053] audit: type=2000 audit(1475094349.764:1): initialized [ 0.764450] Initialise system trusted keyrings [ 0.764560] workingset: timestamp_bits=37 max_order=21 bucket_order=0 [ 0.764576] zbud: loaded [ 0.830490] Key type asymmetric registered [ 0.830493] Asymmetric key parser 'x509' registered [ 0.840044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.840079] io scheduler noop registered [ 0.840081] io scheduler deadline registered [ 0.852029] io scheduler cfq registered (default) [ 0.852639] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.852646] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.852664] intel_idle: does not run on family 6 model 15 [ 0.852804] GHES: HEST is not enabled! [ 0.852864] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.873244] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.873629] Linux agpgart interface v0.103 [ 0.873738] AMD IOMMUv2 driver by Joerg Roedel [ 0.873739] AMD IOMMUv2 functionality not available on this system [ 0.873918] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.874257] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.874263] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.874401] mousedev: PS/2 mouse device common for all mice [ 0.874447] rtc_cmos 00:01: RTC can wake from S4 [ 0.874558] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.874579] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.874591] ledtrig-cpu: registered to indicate activity on CPUs [ 0.944023] NET: Registered protocol family 10 [ 0.944262] mip6: Mobile IPv6 [ 0.944265] NET: Registered protocol family 17 [ 0.944267] mpls_gso: MPLS GSO support [ 0.944419] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6 [ 0.944426] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6 [ 0.944463] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 0.944596] registered taskstats version 1 [ 0.944599] Loading compiled-in X.509 certificates [ 0.946086] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 0.946409] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 0.946427] zswap: loaded using pool lzo/zbud [ 0.946755] rtc_cmos 00:01: setting system clock to 2016-09-28 20:25:50 UTC (1475094350) [ 0.946802] PM: Hibernation image not present or could not be loaded. [ 0.948105] Freeing unused kernel memory: 1368K (ffffffff86925000 - ffffffff86a7b000) [ 0.948107] Write protecting the kernel read-only data: 10240k [ 0.948272] Freeing unused kernel memory: 116K (ffff8800063e3000 - ffff880006400000) [ 0.951502] Freeing unused kernel memory: 1332K (ffff8800066b3000 - ffff880006800000) [ 0.959977] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.015927] systemd-udevd[79]: starting version 215 [ 1.016241] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available) [ 1.024980] usb_common: module verification failed: signature and/or required key missing - tainting kernel [ 1.026437] ACPI: bus type USB registered [ 1.026469] usbcore: registered new interface driver usbfs [ 1.026481] usbcore: registered new interface driver hub [ 1.030250] usbcore: registered new device driver usb [ 1.030801] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.031050] ehci-pci: EHCI PCI platform driver [ 1.031130] uhci_hcd: USB Universal Host Controller Interface driver [ 1.031204] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.031212] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.035120] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.036559] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfb004000 [ 1.038996] SCSI subsystem initialized [ 1.040353] libata version 3.00 loaded. [ 1.041327] scsi host0: pata_jmicron [ 1.041429] scsi host1: pata_jmicron [ 1.041480] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 19 [ 1.041482] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 19 [ 1.041714] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.041723] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.042107] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xffffc90000e3a000, 00:1a:4d:93:21:56, XID 18000000 IRQ 28 [ 1.042110] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.042615] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.048076] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.048151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.048153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.048156] usb usb1: Product: EHCI Host Controller [ 1.048157] usb usb1: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 ehci_hcd [ 1.048159] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.048319] hub 1-0:1.0: USB hub found [ 1.048327] hub 1-0:1.0: 6 ports detected [ 1.048632] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.048639] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.052546] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.052777] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb005000 [ 1.056523] Floppy drive(s): fd0 is 1.44M [ 1.064018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.064095] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.064097] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.064100] usb usb2: Product: EHCI Host Controller [ 1.064101] usb usb2: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 ehci_hcd [ 1.064103] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.064234] hub 2-0:1.0: USB hub found [ 1.064243] hub 2-0:1.0: 6 ports detected [ 1.064599] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.064606] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.064613] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.064638] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 1.064754] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.064756] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.064758] usb usb3: Product: UHCI Host Controller [ 1.064760] usb usb3: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 uhci_hcd [ 1.064762] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.064881] hub 3-0:1.0: USB hub found [ 1.064889] hub 3-0:1.0: 2 ports detected [ 1.065063] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.065069] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.065074] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.065096] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 1.065225] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.065228] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.065230] usb usb4: Product: UHCI Host Controller [ 1.065232] usb usb4: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 uhci_hcd [ 1.065234] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.065345] hub 4-0:1.0: USB hub found [ 1.065353] hub 4-0:1.0: 2 ports detected [ 1.065591] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.065598] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.065604] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.065620] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 1.065744] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.065747] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.065749] usb usb5: Product: UHCI Host Controller [ 1.065751] usb usb5: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 uhci_hcd [ 1.065753] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.065944] hub 5-0:1.0: USB hub found [ 1.065952] hub 5-0:1.0: 2 ports detected [ 1.066117] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.066123] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.066128] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.066144] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 1.066272] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.066275] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.066277] usb usb6: Product: UHCI Host Controller [ 1.066279] usb usb6: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 uhci_hcd [ 1.066280] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.066392] hub 6-0:1.0: USB hub found [ 1.066400] hub 6-0:1.0: 2 ports detected [ 1.066632] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.066638] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.066644] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.066661] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 1.066784] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.066787] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.066789] usb usb7: Product: UHCI Host Controller [ 1.066791] usb usb7: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 uhci_hcd [ 1.066793] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.066982] hub 7-0:1.0: USB hub found [ 1.066990] hub 7-0:1.0: 2 ports detected [ 1.067228] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.067234] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.067240] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.067257] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 1.067387] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.067390] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.067392] usb usb8: Product: UHCI Host Controller [ 1.067394] usb usb8: Manufacturer: Linux 4.7.0-0.bpo.1-amd64 uhci_hcd [ 1.067396] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.067590] hub 8-0:1.0: USB hub found [ 1.067597] hub 8-0:1.0: 2 ports detected [ 1.067776] ahci 0000:00:1f.2: version 3.0 [ 1.067915] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.067943] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.067946] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 1.075733] FDC 0 is a post-1991 82077 [ 1.092802] scsi host2: ahci [ 1.092906] scsi host3: ahci [ 1.093005] scsi host4: ahci [ 1.093101] scsi host5: ahci [ 1.093199] scsi host6: ahci [ 1.093296] scsi host7: ahci [ 1.093358] ata3: SATA max UDMA/133 abar m2048@0xfb006000 port 0xfb006100 irq 29 [ 1.093360] ata4: SATA max UDMA/133 abar m2048@0xfb006000 port 0xfb006180 irq 29 [ 1.093362] ata5: DUMMY [ 1.093363] ata6: DUMMY [ 1.093365] ata7: SATA max UDMA/133 abar m2048@0xfb006000 port 0xfb006300 irq 29 [ 1.093367] ata8: SATA max UDMA/133 abar m2048@0xfb006000 port 0xfb006380 irq 29 [ 1.144072] blk_update_request: I/O error, dev fd0, sector 0 [ 1.144144] floppy: error -5 while reading block 0 [ 1.308704] ata1.00: ATAPI: Compaq CRD-8322B, 1.06, max MWDMA2 [ 1.311552] ata1.00: configured for MWDMA2 [ 1.312127] scsi 0:0:0:0: CD-ROM COMPAQ CRD-8322B 1.06 PQ: 0 ANSI: 5 [ 1.560057] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.562691] ata3.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133 [ 1.562695] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.564023] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 1.564778] ata3.00: configured for UDMA/133 [ 1.564913] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5 [ 1.640052] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.732033] tsc: Refined TSC clocksource calibration: 2666.666 MHz [ 1.732036] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns [ 1.748053] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 1.749065] usb 6-1: New USB device found, idVendor=046d, idProduct=c52b [ 1.749069] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.749071] usb 6-1: Product: USB Receiver [ 1.749074] usb 6-1: Manufacturer: Logitech [ 1.756172] hidraw: raw HID events driver (C) Jiri Kosina [ 1.763122] usbcore: registered new interface driver usbhid [ 1.763125] usbhid: USB HID core driver [ 1.767242] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2 [ 1.773568] usb 2-2: New USB device found, idVendor=7392, idProduct=7811 [ 1.773572] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.773575] usb 2-2: Product: 802.11n WLAN Adapter [ 1.773577] usb 2-2: Manufacturer: Realtek [ 1.773579] usb 2-2: SerialNumber: 00e04c000001 [ 1.887143] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input3 [ 1.887245] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1:1 [ 1.932051] usb 5-1: New USB device found, idVendor=08e6, idProduct=3437 [ 1.932055] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.932058] usb 5-1: Product: USB SmartCard Reader [ 1.932061] usb 5-1: Manufacturer: Gemplus [ 2.056089] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.057180] ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133 [ 2.058588] ata4.00: configured for UDMA/133 [ 2.062150] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5 [ 2.068044] usb 7-1: new full-speed USB device number 2 using uhci_hcd [ 2.268040] usb 7-1: New USB device found, idVendor=08e6, idProduct=3438 [ 2.268044] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.268047] usb 7-1: Product: USB SmartCard Reader [ 2.268049] usb 7-1: Manufacturer: Gemalto [ 2.268051] usb 7-1: SerialNumber: 6BAB4B02 [ 2.376078] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 2.382479] ata7: SATA link down (SStatus 0 SControl 300) [ 2.508063] usb 7-2: new full-speed USB device number 3 using uhci_hcd [ 2.531053] usb 5-2: New USB device found, idVendor=046a, idProduct=0001 [ 2.531057] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.548780] input: HID 046a:0001 as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046A:0001.0005/input/input4 [ 2.588021] usb 8-1: new full-speed USB device number 2 using uhci_hcd [ 2.604288] hid-generic 0003:046A:0001.0005: input,hidraw2: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:1a.2-2/input0 [ 2.664042] usb 2-6: new high-speed USB device number 7 using ehci-pci [ 2.685041] usb 7-2: New USB device found, idVendor=0a12, idProduct=0001 [ 2.685045] usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.685048] usb 7-2: Product: CSR8510 A10 [ 2.690677] ata8: SATA link down (SStatus 0 SControl 300) [ 2.700770] sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [ 2.700774] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.701012] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.701110] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.701157] sd 2:0:0:0: [sda] Write Protect is off [ 2.701160] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.701186] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.710902] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.711125] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 2.711615] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.711682] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.711719] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 2.714855] sda: sda1 sda2 < sda5 > [ 2.715207] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.732083] clocksource: Switched to clocksource tsc [ 2.896947] usb 2-6: New USB device found, idVendor=11b0, idProduct=6348 [ 2.896952] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.896955] usb 2-6: Product: USB3.0 Media Reader [ 2.896957] usb 2-6: Manufacturer: Kingston [ 2.896959] usb 2-6: SerialNumber: 08735313500927 [ 2.903824] usb-storage 2-6:1.0: USB Mass Storage device detected [ 2.903911] scsi host8: usb-storage 2-6:1.0 [ 2.903994] usbcore: registered new interface driver usb-storage [ 2.904270] usbcore: registered new interface driver uas [ 2.946041] usb 8-1: New USB device found, idVendor=0951, idProduct=16a4 [ 2.946045] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.946048] usb 8-1: Product: HyperX 7.1 Audio [ 2.946050] usb 8-1: Manufacturer: Kingston [ 2.946052] usb 8-1: SerialNumber: 00000000 [ 3.066107] input: Kingston HyperX 7.1 Audio as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.3/0003:0951:16A4.0006/input/input5 [ 3.120158] hid-generic 0003:0951:16A4.0006: input,hiddev0,hidraw3: USB HID v1.11 Device [Kingston HyperX 7.1 Audio] on usb-0000:00:1d.2-1/input3 [ 3.140034] device-mapper: uevent: version 1.0.3 [ 3.152076] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 3.155502] random: lvm: uninitialized urandom read (4 bytes read, 68 bits of entropy available) [ 3.163732] random: lvm: uninitialized urandom read (4 bytes read, 73 bits of entropy available) [ 3.918460] scsi 8:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [ 3.935080] scsi 8:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [ 3.951827] scsi 8:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [ 3.968578] scsi 8:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [ 3.969149] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3.970052] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 3.970796] sd 8:0:0:2: Attached scsi generic sg5 type 0 [ 3.971518] sd 8:0:0:3: Attached scsi generic sg6 type 0 [ 4.089701] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 4.092323] sd 8:0:0:2: [sdd] Attached SCSI removable disk [ 4.095072] sd 8:0:0:3: [sde] Attached SCSI removable disk [ 4.097698] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 9.935060] random: nonblocking pool is initialized [ 14.711619] NET: Registered protocol family 38 [ 15.702398] PM: Starting manual resume from disk [ 15.702403] PM: Hibernation image partition 254:2 present [ 15.702404] PM: Looking for hibernation image. [ 15.702602] PM: Image not found (code -22) [ 15.702604] PM: Hibernation image not present or could not be loaded. [ 15.956860] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 16.724933] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 16.725059] systemd[1]: Detected architecture 'x86-64'. [ 16.887656] systemd[1]: Inserted module 'autofs4' [ 16.892180] systemd[1]: Set hostname to . [ 18.023817] systemd[1]: Found ordering cycle on basic.target/start [ 18.023822] systemd[1]: Found dependency on paths.target/start [ 18.023825] systemd[1]: Found dependency on acpid.path/start [ 18.023828] systemd[1]: Found dependency on sysinit.target/start [ 18.023830] systemd[1]: Found dependency on rpcbind.service/start [ 18.023832] systemd[1]: Found dependency on network-online.target/start [ 18.023835] systemd[1]: Found dependency on NetworkManager-wait-online.service/start [ 18.023837] systemd[1]: Found dependency on basic.target/start [ 18.023840] systemd[1]: Breaking ordering cycle by deleting job paths.target/start [ 18.023843] systemd[1]: Job paths.target/start deleted to break ordering cycle starting with basic.target/start [ 18.023988] systemd[1]: Found ordering cycle on basic.target/start [ 18.023991] systemd[1]: Found dependency on sysinit.target/start [ 18.023994] systemd[1]: Found dependency on rpcbind.service/start [ 18.023996] systemd[1]: Found dependency on network-online.target/start [ 18.023999] systemd[1]: Found dependency on NetworkManager-wait-online.service/start [ 18.024001] systemd[1]: Found dependency on basic.target/start [ 18.024003] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start [ 18.024006] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start [ 18.024441] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 18.024491] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 18.024501] systemd[1]: Starting Remote File Systems (Pre). [ 18.024511] systemd[1]: Reached target Remote File Systems (Pre). [ 18.024524] systemd[1]: Expecting device dev-disk-by\x2duuid-1d81f825\x2d9343\x2d4bb5\x2dad12\x2d9b44558562f2.device... [ 18.024533] systemd[1]: Expecting device dev-mapper-sda5_crypt.device... [ 18.024544] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 18.024572] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 18.024591] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 18.024668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 18.024679] systemd[1]: Expecting device dev-mapper-p35\x2d\x2dvg\x2dswap_1.device... [ 18.024690] systemd[1]: Expecting device dev-disk-by\x2duuid-cd80be8a\x2dba4f\x2d49f7\x2d8416\x2d76a2bc2fdd48.device... [ 18.024699] systemd[1]: Starting Root Slice. [ 18.024720] systemd[1]: Created slice Root Slice. [ 18.024728] systemd[1]: Starting User and Session Slice. [ 18.024765] systemd[1]: Created slice User and Session Slice. [ 18.024774] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 18.024805] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 18.024813] systemd[1]: Starting Delayed Shutdown Socket. [ 18.024835] systemd[1]: Listening on Delayed Shutdown Socket. [ 18.024843] systemd[1]: Starting Journal Socket (/dev/log). [ 18.024872] systemd[1]: Listening on Journal Socket (/dev/log). [ 18.024880] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 18.024905] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 18.024913] systemd[1]: Starting LVM2 metadata daemon socket. [ 18.024936] systemd[1]: Listening on LVM2 metadata daemon socket. [ 18.024947] systemd[1]: Starting udev Control Socket. [ 18.024967] systemd[1]: Listening on udev Control Socket. [ 18.024978] systemd[1]: Starting udev Kernel Socket. [ 18.024997] systemd[1]: Listening on udev Kernel Socket. [ 18.025007] systemd[1]: Starting Journal Socket. [ 18.025036] systemd[1]: Listening on Journal Socket. [ 18.025052] systemd[1]: Starting System Slice. [ 18.025082] systemd[1]: Created slice System Slice. [ 18.025096] systemd[1]: Started File System Check on Root Device. [ 18.025103] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 18.025144] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 18.025154] systemd[1]: Starting system-getty.slice. [ 18.025190] systemd[1]: Created slice system-getty.slice. [ 18.025210] systemd[1]: Starting Increase datagram queue length... [ 18.044164] systemd[1]: Mounting POSIX Message Queue File System... [ 18.087676] systemd[1]: Starting Load Kernel Modules... [ 18.104201] systemd[1]: Mounting Debug File System... [ 18.104581] systemd[1]: Starting udev Coldplug all Devices... [ 18.104991] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. [ 18.105050] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 18.105642] systemd[1]: Started Set Up Additional Binary Formats. [ 18.105678] systemd[1]: Mounting Huge Pages File System... [ 18.106155] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 18.106577] systemd[1]: Starting LSB: NFS support files common to client and server... [ 18.106964] systemd[1]: Starting Slices. [ 18.106976] systemd[1]: Reached target Slices. [ 18.251134] systemd[1]: Started udev Coldplug all Devices. [ 18.251342] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 18.271592] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 18.271743] systemd[1]: Starting Create Static Device Nodes in /dev... [ 18.588017] lp: driver loaded but no devices found [ 18.649881] ppdev: user-space parallel port driver [ 18.681328] parport_pc 00:04: reported by Plug and Play ACPI [ 18.681391] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 18.726931] systemd[1]: Mounted Huge Pages File System. [ 18.726973] systemd[1]: Mounted Debug File System. [ 18.726994] systemd[1]: Mounted POSIX Message Queue File System. [ 18.727219] systemd[1]: Started Increase datagram queue length. [ 18.728769] systemd[1]: Starting Syslog Socket. [ 18.728804] systemd[1]: Listening on Syslog Socket. [ 18.728831] systemd[1]: Starting Journal Service... [ 18.740300] systemd[1]: Started Journal Service. [ 18.776145] lp0: using parport0 (interrupt-driven). [ 18.849439] fuse init (API version 7.25) [ 19.443063] systemd-udevd[278]: starting version 215 [ 21.500361] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 [ 21.500368] ACPI: Power Button [PWRB] [ 21.500444] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 21.500447] ACPI: Power Button [PWRF] [ 21.585114] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 21.608997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.770130] [drm] Initialized drm 1.1.0 20060810 [ 22.038507] wmi: Mapper loaded [ 22.169257] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160422/utaddress-255) [ 22.169264] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.169296] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 22.351172] nouveau 0000:01:00.0: NVIDIA G80 (450300a2) [ 22.384179] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 22.396079] blk_update_request: I/O error, dev fd0, sector 0 [ 22.396692] floppy: error -5 while reading block 0 [ 22.462021] nouveau 0000:01:00.0: bios: version 60.80.18.00.02 [ 22.465096] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 22.482317] nouveau 0000:01:00.0: fb: 320 MiB GDDR3 [ 23.009772] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 23.009777] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.009779] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 23.009781] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 23.009783] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 23.009785] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 23.009787] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 23.009790] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 23.009792] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 23.009794] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 23.009796] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 23.022767] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 23.029801] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 23.029845] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 23.029884] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 23.029926] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 23.029966] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 23.030004] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 23.030043] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 23.065989] adt7475 4-002e: ADT7473 device, revision 0 [ 23.065992] adt7475 4-002e: Optional features: fan4 [ 23.090879] [TTM] Zone kernel: Available graphics memory: 4088528 kiB [ 23.090881] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 23.090883] [TTM] Initializing pool allocator [ 23.090889] [TTM] Initializing DMA pool allocator [ 23.090901] nouveau 0000:01:00.0: DRM: VRAM: 320 MiB [ 23.090903] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 23.090907] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 23.090909] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 23.090912] nouveau 0000:01:00.0: DRM: DCB outp 00: 04000320 00000028 [ 23.090914] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000322 00000030 [ 23.090916] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011310 00000028 [ 23.090918] nouveau 0000:01:00.0: DRM: DCB outp 03: 02011312 00000030 [ 23.090920] nouveau 0000:01:00.0: DRM: DCB outp 04: 010223f1 00c1c023 [ 23.090922] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030 [ 23.090924] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130 [ 23.090926] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210 [ 23.090927] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211 [ 23.090929] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213 [ 23.094610] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19 [ 23.094612] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing [ 23.094643] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 23.094644] [drm] Driver supports precise vblank timestamp query. [ 23.103584] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 23.180557] coretemp coretemp.0: Using relative temperature scale! [ 23.180569] coretemp coretemp.0: Using relative temperature scale! [ 23.188541] nouveau 0000:01:00.0: DRM: allocated 1920x1440 fb: 0x60000, bo ffff8800db93c800 [ 23.188611] fbcon: nouveaufb (fb0) is primary device [ 23.266289] intel_powerclamp: No package C-state available [ 23.294788] intel_powerclamp: No package C-state available [ 23.352475] intel_powerclamp: No package C-state available [ 23.356395] intel_powerclamp: No package C-state available [ 23.356396] Console: switching to colour frame buffer device 160x64 [ 23.359786] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 23.372241] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 23.505774] iTCO_vendor_support: vendor-support=0 [ 23.509265] usbcore: registered new interface driver snd-usb-audio [ 23.528501] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 23.528551] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460) [ 23.528654] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.786051] Bluetooth: Core ver 2.21 [ 23.786074] NET: Registered protocol family 31 [ 23.786076] Bluetooth: HCI device and connection manager initialized [ 23.786081] Bluetooth: HCI socket layer initialized [ 23.786084] Bluetooth: L2CAP socket layer initialized [ 23.786092] Bluetooth: SCO socket layer initialized [ 24.053602] usbcore: registered new interface driver btusb [ 25.058502] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 25.096077] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 25.127188] Adding 4190204k swap on /dev/mapper/p35--vg-swap_1. Priority:-1 extents:1 across:4190204k FS [ 25.477455] rtl8192cu: Chip version 0x10 [ 25.562077] rtl8192cu: MAC address: 74:da:38:02:6f:8f [ 25.562082] rtl8192cu: Board Type 0 [ 25.562323] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 25.562349] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 25.825109] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 25.825366] usbcore: registered new interface driver rtl8192cu [ 25.967050] usb 2-2: firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 27.171744] systemd-journald[267]: Received request to flush runtime journal from PID 1 [ 33.729308] r8169 0000:04:00.0 eth0: link down [ 36.127978] r8169 0000:04:00.0 eth0: link up [ 41.358586] vboxdrv: Found 2 processor cores [ 41.358764] vboxdrv: fAsync=0 offMin=0x2a0 offMax=0xb00 [ 41.458892] vboxdrv: TSC mode is Synchronous, tentative frequency 2666665760 Hz [ 41.458895] vboxdrv: Successfully loaded version 5.0.24_Debian (interface 0x00240000) [ 41.527809] VBoxNetFlt: Successfully started. [ 41.604818] VBoxNetAdp: Successfully started. [ 41.632179] VBoxPciLinuxInit [ 41.742982] vboxpci: IOMMU not found (not registered) [ 132.018095] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 132.120939] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 132.257816] PM: Hibernation mode set to 'platform' [ 132.269778] (NULL device *): firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 132.269784] PM: Syncing filesystems ... done. [ 132.568415] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 132.569927] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 132.570088] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 132.570091] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 132.570096] PM: Marking nosave pages: [mem 0xdfee0000-0xffffffff] [ 132.570531] PM: Basic memory bitmaps created [ 132.570544] PM: Preallocating image memory... done (allocated 237426 pages) [ 132.864773] PM: Allocated 949704 kbytes in 0.29 seconds (3274.84 MB/s) [ 132.864776] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 132.866401] Suspending console(s) (use no_console_suspend to debug) [ 132.866942] parport_pc 00:04: disabled [ 132.867036] serial 00:03: disabled [ 132.867062] serial 00:03: System wakeup disabled by ACPI [ 132.867764] nouveau 0000:01:00.0: DRM: suspending console... [ 132.867769] nouveau 0000:01:00.0: DRM: suspending display... [ 132.867803] nouveau 0000:01:00.0: DRM: evicting buffers... [ 133.128829] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle... [ 133.128834] nouveau 0000:01:00.0: DRM: suspending client object trees... [ 133.129027] nouveau 0000:01:00.0: DRM: suspending kernel object tree... [ 134.497079] PM: freeze of devices complete after 1630.670 msecs [ 134.497698] PM: late freeze of devices complete after 0.616 msecs [ 134.498391] PM: noirq freeze of devices complete after 0.691 msecs [ 134.498918] ACPI: Preparing to enter system sleep state S4 [ 134.501247] PM: Saving platform NVS memory [ 134.501287] Disabling non-boot CPUs ... [ 134.502547] smpboot: CPU 1 is now offline [ 134.503138] PM: Creating hibernation image: [ 134.505472] PM: Need to copy 268795 pages [ 134.505472] PM: Normal pages needed: 268795 + 1024, available pages: 1827809 [ 134.505472] PM: Restoring platform NVS memory [ 134.505472] Enabling non-boot CPUs ... [ 134.505472] x86: Booting SMP configuration: [ 134.505472] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 134.505739] cache: parent cpu1 should not be sleeping [ 134.505997] CPU1 is up [ 134.507504] ACPI: Waking up from system sleep state S4 [ 134.509797] PM: noirq restore of devices complete after 0.762 msecs [ 134.510020] PM: early restore of devices complete after 0.204 msecs [ 134.566097] usb usb3: root hub lost power or was reset [ 134.566129] usb usb4: root hub lost power or was reset [ 134.566157] usb usb5: root hub lost power or was reset [ 134.566184] usb usb1: root hub lost power or was reset [ 134.570083] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 134.570197] usb usb6: root hub lost power or was reset [ 134.570200] usb usb7: root hub lost power or was reset [ 134.570227] usb usb8: root hub lost power or was reset [ 134.570241] nouveau 0000:01:00.0: DRM: resuming kernel object tree... [ 134.571226] usb usb2: root hub lost power or was reset [ 134.575116] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 134.575131] rtc_cmos 00:01: System wakeup disabled by ACPI [ 134.575449] serial 00:03: activated [ 134.575855] parport_pc 00:04: activated [ 134.578846] sd 2:0:0:0: [sda] Starting disk [ 134.736057] nouveau 0000:01:00.0: DRM: resuming client object trees... [ 134.736275] nouveau 0000:01:00.0: DRM: resuming display... [ 134.809198] nouveau 0000:01:00.0: DRM: resuming console... [ 134.836686] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 134.836688] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 134.839549] ata1.00: configured for MWDMA2 [ 134.910582] ata8: SATA link down (SStatus 0 SControl 300) [ 134.910599] ata7: SATA link down (SStatus 0 SControl 300) [ 135.008123] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 135.028020] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 135.032019] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 135.032035] usb 6-1: reset full-speed USB device number 2 using uhci_hcd [ 135.032039] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [ 135.068028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 135.068039] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 135.070731] ata4.00: configured for UDMA/133 [ 135.072137] ata3.00: configured for UDMA/133 [ 135.272072] usb 2-6: reset high-speed USB device number 7 using ehci-pci [ 135.280027] usb 7-2: reset full-speed USB device number 3 using uhci_hcd [ 135.408047] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [ 135.726546] PM: restore of devices complete after 1160.542 msecs [ 135.726644] usb 7-2:1.0: rebind failed: -517 [ 135.726651] usb 7-2:1.1: rebind failed: -517 [ 135.726670] usb 2-2:1.0: rebind failed: -517 [ 135.726903] PM: Image restored successfully. [ 135.726941] PM: Basic memory bitmaps freed [ 135.726944] Restarting tasks ... [ 135.726996] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 135.727000] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 135.727047] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 135.727050] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 135.727092] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 135.727095] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 135.727137] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 135.727140] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 135.727212] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 135.727215] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 135.727253] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 135.727256] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 135.738107] done. [ 135.753318] r8169 0000:04:00.0 eth0: link down [ 135.872209] rtl8192cu: Chip version 0x10 [ 135.957361] rtl8192cu: MAC address: 74:da:38:02:6f:8f [ 135.957366] rtl8192cu: Board Type 0 [ 135.957605] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 135.957648] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 135.959063] ieee80211 phy1: Selected rate control algorithm 'rtl_rc' [ 136.290877] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 136.290882] Bluetooth: BNEP filters: protocol multicast [ 136.290888] Bluetooth: BNEP socket layer initialized [ 138.142591] r8169 0000:04:00.0 eth0: link up [ 168.729470] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 4 [gnome-shell[1633]] subc 0 mthd 0060 data 8000000f [ 322.754052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 322.829985] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 322.902784] PM: Hibernation mode set to 'platform' [ 322.903318] (NULL device *): firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 322.903326] PM: Syncing filesystems ... done. [ 323.086915] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 323.088097] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 323.088274] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 323.088276] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 323.088280] PM: Marking nosave pages: [mem 0xdfee0000-0xffffffff] [ 323.088606] PM: Basic memory bitmaps created [ 323.088618] PM: Preallocating image memory... done (allocated 337750 pages) [ 323.332189] PM: Allocated 1351000 kbytes in 0.24 seconds (5629.16 MB/s) [ 323.332192] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 323.333867] Suspending console(s) (use no_console_suspend to debug) [ 323.334318] parport_pc 00:04: disabled [ 323.334393] serial 00:03: disabled [ 323.334413] serial 00:03: System wakeup disabled by ACPI [ 323.334779] nouveau 0000:01:00.0: DRM: suspending console... [ 323.334784] nouveau 0000:01:00.0: DRM: suspending display... [ 323.334814] nouveau 0000:01:00.0: DRM: evicting buffers... [ 323.533971] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle... [ 323.533976] nouveau 0000:01:00.0: DRM: suspending client object trees... [ 323.534172] nouveau 0000:01:00.0: DRM: suspending kernel object tree... [ 324.880051] PM: freeze of devices complete after 1546.177 msecs [ 324.880594] PM: late freeze of devices complete after 0.540 msecs [ 324.881186] PM: noirq freeze of devices complete after 0.590 msecs [ 324.881676] ACPI: Preparing to enter system sleep state S4 [ 324.883105] PM: Saving platform NVS memory [ 324.883144] Disabling non-boot CPUs ... [ 324.884389] smpboot: CPU 1 is now offline [ 324.884966] PM: Creating hibernation image: [ 324.888377] PM: Need to copy 349109 pages [ 324.888377] PM: Normal pages needed: 349109 + 1024, available pages: 1747510 [ 324.888377] PM: Restoring platform NVS memory [ 324.888377] Enabling non-boot CPUs ... [ 324.888377] x86: Booting SMP configuration: [ 324.888377] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 324.887657] cache: parent cpu1 should not be sleeping [ 324.888377] CPU1 is up [ 324.889457] ACPI: Waking up from system sleep state S4 [ 324.891742] PM: noirq restore of devices complete after 0.776 msecs [ 324.891966] PM: early restore of devices complete after 0.204 msecs [ 324.958590] usb usb6: root hub lost power or was reset [ 324.958623] usb usb7: root hub lost power or was reset [ 324.958649] usb usb8: root hub lost power or was reset [ 324.958679] usb usb2: root hub lost power or was reset [ 324.962567] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 324.962595] usb usb4: root hub lost power or was reset [ 324.962734] usb usb3: root hub lost power or was reset [ 324.962774] usb usb5: root hub lost power or was reset [ 324.962835] usb usb1: root hub lost power or was reset [ 324.963059] nouveau 0000:01:00.0: DRM: resuming kernel object tree... [ 324.966717] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 324.967921] rtc_cmos 00:01: System wakeup disabled by ACPI [ 324.968254] serial 00:03: activated [ 324.968661] parport_pc 00:04: activated [ 324.969136] sd 2:0:0:0: [sda] Starting disk [ 325.128922] nouveau 0000:01:00.0: DRM: resuming client object trees... [ 325.129103] nouveau 0000:01:00.0: DRM: resuming display... [ 325.198604] nouveau 0000:01:00.0: DRM: resuming console... [ 325.232705] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 325.232707] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 325.235569] ata1.00: configured for MWDMA2 [ 325.302387] ata8: SATA link down (SStatus 0 SControl 300) [ 325.302410] ata7: SATA link down (SStatus 0 SControl 300) [ 325.412021] usb 2-2: reset high-speed USB device number 3 using ehci-pci [ 325.416043] usb 6-1: reset full-speed USB device number 2 using uhci_hcd [ 325.416044] usb 7-2: reset full-speed USB device number 3 using uhci_hcd [ 325.416058] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [ 325.460034] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 325.464033] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 325.464185] ata3.00: configured for UDMA/133 [ 325.466523] ata4.00: configured for UDMA/133 [ 325.552058] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [ 325.656072] usb 2-6: reset high-speed USB device number 7 using ehci-pci [ 325.672050] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 325.952068] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [ 326.117051] PM: restore of devices complete after 1158.602 msecs [ 326.117156] usb 7-2:1.0: rebind failed: -517 [ 326.117166] usb 7-2:1.1: rebind failed: -517 [ 326.117188] usb 2-2:1.0: rebind failed: -517 [ 326.117426] PM: Image restored successfully. [ 326.117460] PM: Basic memory bitmaps freed [ 326.117463] Restarting tasks ... [ 326.117516] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 326.117520] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 326.117568] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 326.117571] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 326.117613] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 326.117616] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 326.117658] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 326.117660] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 326.117754] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 326.117757] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 326.117795] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 326.117798] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 326.130902] done. [ 326.193315] r8169 0000:04:00.0 eth0: link down [ 326.267599] rtl8192cu: Chip version 0x10 [ 326.353497] rtl8192cu: MAC address: 74:da:38:02:6f:8f [ 326.353503] rtl8192cu: Board Type 0 [ 326.353742] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 326.353784] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 326.353991] ieee80211 phy2: Selected rate control algorithm 'rtl_rc' [ 328.537567] r8169 0000:04:00.0 eth0: link up [ 399.312020] FS-Cache: Loaded [ 399.330197] Key type dns_resolver registered [ 399.523438] FS-Cache: Netfs 'cifs' registered for caching [ 399.556023] Key type cifs.spnego registered [ 399.556029] Key type cifs.idmap registered [ 741.205380] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 4156.283409] perf: interrupt took too long (3131 > 3127), lowering kernel.perf_event_max_sample_rate to 63750 [15316.043669] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [15319.667403] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [15501.442992] perf: interrupt took too long (3915 > 3913), lowering kernel.perf_event_max_sample_rate to 51000 [15704.972383] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15705.312510] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [15705.350533] PM: Hibernation mode set to 'platform' [15705.354087] (NULL device *): firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin [15705.354504] PM: Syncing filesystems ... done. [15705.673492] Freezing user space processes ... (elapsed 0.001 seconds) done. [15705.675056] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [15705.675233] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [15705.675236] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [15705.675239] PM: Marking nosave pages: [mem 0xdfee0000-0xffffffff] [15705.675566] PM: Basic memory bitmaps created [15705.675578] PM: Preallocating image memory... done (allocated 564257 pages) [15705.982076] PM: Allocated 2257028 kbytes in 0.30 seconds (7523.42 MB/s) [15705.982079] Freezing remaining freezable tasks ... (elapsed 2.715 seconds) done. [15708.697553] Suspending console(s) (use no_console_suspend to debug) [15708.698057] parport_pc 00:04: disabled [15708.698149] serial 00:03: disabled [15708.698196] serial 00:03: System wakeup disabled by ACPI [15708.698949] nouveau 0000:01:00.0: DRM: suspending console... [15708.698953] nouveau 0000:01:00.0: DRM: suspending display... [15708.698977] nouveau 0000:01:00.0: DRM: evicting buffers... [15709.211505] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle... [15709.211510] nouveau 0000:01:00.0: DRM: suspending client object trees... [15709.211709] nouveau 0000:01:00.0: DRM: suspending kernel object tree... [15710.570021] PM: freeze of devices complete after 1872.459 msecs [15710.570648] PM: late freeze of devices complete after 0.624 msecs [15710.571344] PM: noirq freeze of devices complete after 0.694 msecs [15710.571868] ACPI: Preparing to enter system sleep state S4 [15710.573602] PM: Saving platform NVS memory [15710.573645] Disabling non-boot CPUs ... [15710.574913] smpboot: CPU 1 is now offline [15710.575522] PM: Creating hibernation image: [15710.577842] PM: Need to copy 587343 pages [15710.577842] PM: Normal pages needed: 587343 + 1024, available pages: 1509275 [15710.577842] PM: Restoring platform NVS memory [15710.577842] Enabling non-boot CPUs ... [15710.577842] x86: Booting SMP configuration: [15710.577842] smpboot: Booting Node 0 Processor 1 APIC 0x1 [15710.578136] cache: parent cpu1 should not be sleeping [15710.578396] CPU1 is up [15710.579908] ACPI: Waking up from system sleep state S4 [15710.582248] PM: noirq restore of devices complete after 0.804 msecs [15710.582478] PM: early restore of devices complete after 0.211 msecs [15710.679743] usb usb3: root hub lost power or was reset [15710.679774] usb usb4: root hub lost power or was reset [15710.679801] usb usb5: root hub lost power or was reset [15710.679829] usb usb1: root hub lost power or was reset [15710.683723] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [15710.683838] usb usb6: root hub lost power or was reset [15710.683841] usb usb7: root hub lost power or was reset [15710.683866] usb usb8: root hub lost power or was reset [15710.683881] nouveau 0000:01:00.0: DRM: resuming kernel object tree... [15710.684549] rtc_cmos 00:01: System wakeup disabled by ACPI [15710.684906] serial 00:03: activated [15710.685318] parport_pc 00:04: activated [15710.685697] usb usb2: root hub lost power or was reset [15710.689581] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [15710.691609] sd 2:0:0:0: [sda] Starting disk [15710.849707] nouveau 0000:01:00.0: DRM: resuming client object trees... [15710.849908] nouveau 0000:01:00.0: DRM: resuming display... [15710.919442] nouveau 0000:01:00.0: DRM: resuming console... [15710.952714] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [15710.952716] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [15710.955579] ata1.00: configured for MWDMA2 [15711.022510] ata8: SATA link down (SStatus 0 SControl 300) [15711.022531] ata7: SATA link down (SStatus 0 SControl 300) [15711.124144] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [15711.140080] usb 2-2: reset high-speed USB device number 3 using ehci-pci [15711.144028] usb 6-1: reset full-speed USB device number 2 using uhci_hcd [15711.144036] usb 7-2: reset full-speed USB device number 3 using uhci_hcd [15711.144051] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [15711.180026] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [15711.184033] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15711.184350] ata3.00: configured for UDMA/133 [15711.186531] ata4.00: configured for UDMA/133 [15711.384073] usb 2-6: reset high-speed USB device number 7 using ehci-pci [15711.400040] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [15711.524027] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [15711.842308] PM: restore of devices complete after 1162.658 msecs [15711.842405] usb 7-2:1.0: rebind failed: -517 [15711.842412] usb 7-2:1.1: rebind failed: -517 [15711.842430] usb 2-2:1.0: rebind failed: -517 [15711.842660] PM: Image restored successfully. [15711.842701] PM: Basic memory bitmaps freed [15711.842707] Restarting tasks ... [15711.843425] pci 0000:00:1e.0: PCI bridge to [bus 05] [15711.843431] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15711.843487] pci 0000:00:1e.0: PCI bridge to [bus 05] [15711.843490] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15711.843532] pci 0000:00:1e.0: PCI bridge to [bus 05] [15711.843535] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15711.843576] pci 0000:00:1e.0: PCI bridge to [bus 05] [15711.843579] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15711.843622] pci 0000:00:1e.0: PCI bridge to [bus 05] [15711.843625] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15711.843663] pci 0000:00:1e.0: PCI bridge to [bus 05] [15711.843666] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15711.844867] rtl8192cu: Chip version 0x10 [15711.847874] done. [15711.925304] r8169 0000:04:00.0 eth0: link down [15711.976106] rtl8192cu: MAC address: 74:da:38:02:6f:8f [15711.976111] rtl8192cu: Board Type 0 [15711.976351] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [15711.976394] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [15711.977633] ieee80211 phy3: Selected rate control algorithm 'rtl_rc' [15714.305338] r8169 0000:04:00.0 eth0: link up [15904.297779] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [15904.390388] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [15904.421169] PM: Hibernation mode set to 'platform' [15904.422080] (NULL device *): firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin [15904.422167] PM: Syncing filesystems ... done. [15904.627010] Freezing user space processes ... (elapsed 0.001 seconds) done. [15904.628638] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [15904.628828] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [15904.628831] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [15904.628834] PM: Marking nosave pages: [mem 0xdfee0000-0xffffffff] [15904.629161] PM: Basic memory bitmaps created [15904.629173] PM: Preallocating image memory... done (allocated 591457 pages) [15904.945911] PM: Allocated 2365828 kbytes in 0.31 seconds (7631.70 MB/s) [15904.945914] Freezing remaining freezable tasks ... (elapsed 4.734 seconds) done. [15909.680941] Suspending console(s) (use no_console_suspend to debug) [15909.681443] parport_pc 00:04: disabled [15909.681535] serial 00:03: disabled [15909.681560] serial 00:03: System wakeup disabled by ACPI [15909.681920] nouveau 0000:01:00.0: DRM: suspending console... [15909.681924] nouveau 0000:01:00.0: DRM: suspending display... [15909.681945] nouveau 0000:01:00.0: DRM: evicting buffers... [15909.990929] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle... [15909.990934] nouveau 0000:01:00.0: DRM: suspending client object trees... [15909.991133] nouveau 0000:01:00.0: DRM: suspending kernel object tree... [15911.349287] PM: freeze of devices complete after 1668.336 msecs [15911.349939] PM: late freeze of devices complete after 0.649 msecs [15911.350639] PM: noirq freeze of devices complete after 0.697 msecs [15911.351169] ACPI: Preparing to enter system sleep state S4 [15911.352916] PM: Saving platform NVS memory [15911.352958] Disabling non-boot CPUs ... [15911.354223] smpboot: CPU 1 is now offline [15911.354821] PM: Creating hibernation image: [15911.357152] PM: Need to copy 597892 pages [15911.357152] PM: Normal pages needed: 597892 + 1024, available pages: 1498726 [15911.357152] PM: Restoring platform NVS memory [15911.357152] Enabling non-boot CPUs ... [15911.357152] x86: Booting SMP configuration: [15911.357152] smpboot: Booting Node 0 Processor 1 APIC 0x1 [15911.357514] cache: parent cpu1 should not be sleeping [15911.357777] CPU1 is up [15911.359291] ACPI: Waking up from system sleep state S4 [15911.361607] PM: noirq restore of devices complete after 0.782 msecs [15911.361832] PM: early restore of devices complete after 0.205 msecs [15911.460463] usb usb3: root hub lost power or was reset [15911.460494] usb usb4: root hub lost power or was reset [15911.460522] usb usb5: root hub lost power or was reset [15911.460549] usb usb1: root hub lost power or was reset [15911.464149] usb usb6: root hub lost power or was reset [15911.464177] usb usb7: root hub lost power or was reset [15911.464205] usb usb8: root hub lost power or was reset [15911.464222] usb usb2: root hub lost power or was reset [15911.464455] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [15911.464490] nouveau 0000:01:00.0: DRM: resuming kernel object tree... [15911.468116] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [15911.469289] rtc_cmos 00:01: System wakeup disabled by ACPI [15911.469606] serial 00:03: activated [15911.470023] parport_pc 00:04: activated [15911.470641] sd 2:0:0:0: [sda] Starting disk [15911.630315] nouveau 0000:01:00.0: DRM: resuming client object trees... [15911.630516] nouveau 0000:01:00.0: DRM: resuming display... [15911.700056] nouveau 0000:01:00.0: DRM: resuming console... [15911.736695] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [15911.736697] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [15911.739559] ata1.00: configured for MWDMA2 [15911.802493] ata8: SATA link down (SStatus 0 SControl 300) [15911.802516] ata7: SATA link down (SStatus 0 SControl 300) [15911.920195] usb 7-2: reset full-speed USB device number 3 using uhci_hcd [15911.924022] usb 2-2: reset high-speed USB device number 3 using ehci-pci [15911.924026] usb 6-1: reset full-speed USB device number 2 using uhci_hcd [15911.960023] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [15911.964053] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [15911.965261] ata3.00: configured for UDMA/133 [15911.966547] ata4.00: configured for UDMA/133 [15912.056110] usb 5-2: reset low-speed USB device number 3 using uhci_hcd [15912.128038] usb 8-1: reset full-speed USB device number 2 using uhci_hcd [15912.168071] usb 2-6: reset high-speed USB device number 7 using ehci-pci [15912.176030] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [15912.456232] usb 5-1: reset full-speed USB device number 2 using uhci_hcd [15912.612287] PM: restore of devices complete after 1151.920 msecs [15912.612394] usb 7-2:1.0: rebind failed: -517 [15912.612403] usb 7-2:1.1: rebind failed: -517 [15912.612425] usb 2-2:1.0: rebind failed: -517 [15912.612664] PM: Image restored successfully. [15912.612705] PM: Basic memory bitmaps freed [15912.612708] Restarting tasks ... [15912.612760] pci 0000:00:1e.0: PCI bridge to [bus 05] [15912.612765] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15912.612820] pci 0000:00:1e.0: PCI bridge to [bus 05] [15912.612823] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15912.612866] pci 0000:00:1e.0: PCI bridge to [bus 05] [15912.612869] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15912.612910] pci 0000:00:1e.0: PCI bridge to [bus 05] [15912.612913] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15912.612954] pci 0000:00:1e.0: PCI bridge to [bus 05] [15912.612956] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15912.612993] pci 0000:00:1e.0: PCI bridge to [bus 05] [15912.612996] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [15912.633187] done. [15912.717630] r8169 0000:04:00.0 eth0: link down [15912.755843] rtl8192cu: Chip version 0x10 [15912.841307] rtl8192cu: MAC address: 74:da:38:02:6f:8f [15912.841312] rtl8192cu: Board Type 0 [15912.841551] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [15912.841596] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [15912.842426] ieee80211 phy4: Selected rate control algorithm 'rtl_rc' [15915.054096] r8169 0000:04:00.0 eth0: link up [17252.334410] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [17285.207121] vboxdrv: ffffffffc0000020 VMMR0.r0 [17285.433215] vboxdrv: ffffffffc00ff020 VBoxDDR0.r0 [17285.462322] vboxdrv: ffffffffc011f020 VBoxDD2R0.r0 [17285.608498] VBoxNetFlt: attached to 'eth0' / 00:1a:4d:93:21:56 [17285.656735] device eth0 entered promiscuous mode [17534.856931] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [25826.247202] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [26039.202061] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [26557.183848] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [26579.867003] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [26718.383785] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [26883.901099] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [26889.734345] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [27214.250047] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [31116.218339] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 0 mthd 0060 data 8000000f [36080.184951] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 3 mthd 0f04 data 00000000 [36080.184973] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 3 mthd 0f04 data 3fddb3d7 [36080.184990] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 3 mthd 0f04 data 00000000 [36080.185005] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[792]] subc 3 mthd 0f04 data 00000000