[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2016-04-29 [ 0.000000] Linux version 4.8.0-rc8-inteltest-01276-g92c7457 (anssiha@localhost) (gcc version 4.9.2 (GCC) ) #403 SMP PREEMPT Mon Oct 3 10:21:59 EEST 2016 [ 0.000000] Command line: BOOT_IMAGE=/fwinstaller/vmlinuztest-gpunightly-microcode LABEL=boot root=PARTUUID=1b7e56fd-a371-49ca-9504-b31a8e7572e5 quiet splash libata.force=3.0G consoleblank=0 rootfstype=ext4 console=ttyS0,115200 ignore_loglevel drm.debug=0xe [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a98f1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a98f2000-0x00000000a9b5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a9b60000-0x00000000ac306fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac307000-0x00000000ac3c1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac3c2000-0x00000000ac5b0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac5b1000-0x00000000acd33fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000acd34000-0x00000000acffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad800000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0xacfb2198 ACPI=0xaccf7000 ACPI 2.0=0xaccf7000 SMBIOS=0xf05b0 MPS=0xfd640 [ 0.000000] esrt: Reserving ESRT space from 0x00000000acfb2198 to 0x00000000acfb21d0. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./SMB-2601, BIOS 5.011 09/21/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00A0000000 mask 7FF8000000 write-back [ 0.000000] 3 base 00A8000000 mask 7FFC000000 write-back [ 0.000000] 4 base 00AC000000 mask 7FFF000000 write-back [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7F80000000 write-back [ 0.000000] 7 base 0260000000 mask 7FE0000000 uncachable [ 0.000000] 8 base 0250000000 mask 7FF0000000 uncachable [ 0.000000] 9 base 024F000000 mask 7FFF000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02bbb000, 0x02bbbfff] PGTABLE [ 0.000000] BRK [0x02bbc000, 0x02bbcfff] PGTABLE [ 0.000000] BRK [0x02bbd000, 0x02bbdfff] PGTABLE [ 0.000000] BRK [0x02bbe000, 0x02bbefff] PGTABLE [ 0.000000] BRK [0x02bbf000, 0x02bbffff] PGTABLE [ 0.000000] BRK [0x02bc0000, 0x02bc0fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000ACCF7000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000ACCF7090 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000ACD0C268 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000ACCF71C0 0150A1 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000ACD32F80 000040 [ 0.000000] ACPI: APIC 0x00000000ACD0C378 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000ACD0C400 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000ACD0C448 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000ACD0C4E8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000ACD0C528 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x00000000ACD0C560 000315 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000ACD0C878 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000ACD0C8C0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000ACD0D540 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000ACD0D5E0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000ACD0DB20 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000ACD0E698 005BB3 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000ACD14250 0000F8 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000ACD14348 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000024effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a98f1fff] [ 0.000000] node 0: [mem 0x00000000a9b60000-0x00000000ac306fff] [ 0.000000] node 0: [mem 0x00000000ac3c2000-0x00000000ac5b0fff] [ 0.000000] node 0: [mem 0x00000000acfff000-0x00000000acffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000024effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024effffff] [ 0.000000] On node 0 totalpages: 2077222 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 25 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10955 pages used for memmap [ 0.000000] DMA32 zone: 701065 pages, LIFO batch:31 [ 0.000000] Normal zone: 21440 pages used for memmap [ 0.000000] Normal zone: 1372160 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000ae000000-0x00000000afffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x33]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0x84]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0xd7]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] res dfl lint[0xab]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xb0000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88024ec00000 s101336 r8192 d29736 u524288 [ 0.000000] pcpu-alloc: s101336 r8192 d29736 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044738 [ 0.000000] Kernel command line: BOOT_IMAGE=/fwinstaller/vmlinuztest-gpunightly-microcode LABEL=boot root=PARTUUID=1b7e56fd-a371-49ca-9504-b31a8e7572e5 quiet splash libata.force=3.0G consoleblank=0 rootfstype=ext4 console=ttyS0,115200 ignore_loglevel drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8039588K/8308888K available (10398K kernel code, 1316K rwdata, 3964K rodata, 1380K init, 1072K bss, 269300K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU kthread priority: 1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.900 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.80 BogoMIPS (lpj=2194900) [ 0.010618] pid_max: default: 32768 minimum: 301 [ 0.015239] ACPI: Core revision 20160422 [ 0.038119] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.046347] Security Framework initialized [ 0.050470] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.057338] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.064851] CPU: Physical Processor ID: 0 [ 0.068860] CPU: Processor Core ID: 0 [ 0.072524] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.078523] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.085568] mce: CPU supports 7 MCE banks [ 0.089581] CPU0: Thermal monitoring enabled (TM1) [ 0.094378] process: using mwait in idle threads [ 0.098992] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.104386] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.110852] Freeing SMP alternatives memory: 40K (ffffffff822a4000 - ffffffff822ae000) [ 0.120132] ftrace: allocating 37955 entries in 149 pages [ 0.142248] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.148859] smpboot: Max logical packages: 2 [ 0.153600] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.169423] TSC deadline timer enabled [ 0.173165] smpboot: CPU0: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.183107] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.193435] ... version: 3 [ 0.197438] ... bit width: 48 [ 0.201523] ... generic registers: 4 [ 0.205525] ... value mask: 0000ffffffffffff [ 0.210827] ... max period: 0000ffffffffffff [ 0.216129] ... fixed-purpose events: 3 [ 0.220132] ... event mask: 000000070000000f [ 0.237668] x86: Booting SMP configuration: [ 0.241845] .... node #0, CPUs: #1 #2 #3 [ 0.441511] x86: Booted up 1 node, 4 CPUs [ 0.445705] smpboot: Total of 4 processors activated (17578.67 BogoMIPS) [ 0.456839] devtmpfs: initialized [ 0.460400] PM: Registering ACPI NVS region [mem 0xac5b1000-0xacd33fff] (7876608 bytes) [ 0.468517] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.478266] xor: automatically using best checksumming function: [ 0.494273] avx : 28192.000 MB/sec [ 0.498453] pinctrl core: initialized pinctrl subsystem [ 0.503748] NET: Registered protocol family 16 [ 0.514275] cpuidle: using governor ladder [ 0.522375] cpuidle: using governor menu [ 0.526363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.533917] ACPI: bus type PCI registered [ 0.537963] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.547251] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.554037] PCI: Using configuration type 1 for base access [ 0.566712] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.589656] raid6: sse2x1 gen() 7273 MB/s [ 0.610677] raid6: sse2x1 xor() 5392 MB/s [ 0.631707] raid6: sse2x2 gen() 8781 MB/s [ 0.652734] raid6: sse2x2 xor() 5941 MB/s [ 0.673764] raid6: sse2x4 gen() 10378 MB/s [ 0.694790] raid6: sse2x4 xor() 7181 MB/s [ 0.715817] raid6: avx2x1 gen() 14125 MB/s [ 0.736846] raid6: avx2x2 gen() 16355 MB/s [ 0.757873] raid6: avx2x4 gen() 18921 MB/s [ 0.762133] raid6: using algorithm avx2x4 gen() 18921 MB/s [ 0.767609] raid6: using avx2x2 recovery algorithm [ 0.772433] ACPI: Added _OSI(Module Device) [ 0.776611] ACPI: Added _OSI(Processor Device) [ 0.781045] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.785742] ACPI: Added _OSI(Processor Aggregator Device) [ 0.791752] ACPI: Executed 18 blocks of module-level executable AML code [ 0.807028] ACPI: Dynamic OEM Table Load: [ 0.811065] ACPI: SSDT 0xFFFF880245124800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.820577] ACPI: Dynamic OEM Table Load: [ 0.824611] ACPI: SSDT 0xFFFF880245817800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.834162] ACPI: Dynamic OEM Table Load: [ 0.838194] ACPI: SSDT 0xFFFF88024508DA00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.849041] ACPI: Interpreter enabled [ 0.852720] ACPI: (supports S0 S3 S5) [ 0.856379] ACPI: Using IOAPIC for interrupt routing [ 0.861363] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.872832] ACPI: Power Resource [PG00] (on) [ 0.877461] ACPI: Power Resource [PG01] (on) [ 0.882082] ACPI: Power Resource [PG02] (on) [ 0.897638] ACPI: Power Resource [FN00] (off) [ 0.902066] ACPI: Power Resource [FN01] (off) [ 0.906495] ACPI: Power Resource [FN02] (off) [ 0.910922] ACPI: Power Resource [FN03] (off) [ 0.915346] ACPI: Power Resource [FN04] (off) [ 0.920784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.926959] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.935237] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.941780] PCI host bridge to bus 0000:00 [ 0.945871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.952646] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.959489] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.966956] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window] [ 0.974427] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.979941] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.986034] pci 0000:00:02.0: [8086:1626] type 00 class 0x030000 [ 0.992039] pci 0000:00:02.0: reg 0x10: [mem 0xb1000000-0xb1ffffff 64bit] [ 0.998821] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.006109] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 1.012458] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 1.018462] pci 0000:00:03.0: reg 0x10: [mem 0xb2614000-0xb2617fff 64bit] [ 1.025346] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 1.031357] pci 0000:00:14.0: reg 0x10: [mem 0xb2600000-0xb260ffff 64bit] [ 1.038190] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.044066] pci 0000:00:14.0: System wakeup disabled by ACPI [ 1.049753] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 1.055765] pci 0000:00:16.0: reg 0x10: [mem 0xb261c000-0xb261c01f 64bit] [ 1.062607] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.068789] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 1.074801] pci 0000:00:1b.0: reg 0x10: [mem 0xb2610000-0xb2613fff 64bit] [ 1.081624] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.087765] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 1.093451] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 1.099511] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.105666] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.111348] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400 [ 1.117402] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.123557] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 1.129248] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 1.135260] pci 0000:00:1d.0: reg 0x10: [mem 0xb261a000-0xb261a3ff] [ 1.141596] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.147734] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.153420] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 1.159593] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 1.165602] pci 0000:00:1f.2: reg 0x10: [io 0x50b0-0x50b7] [ 1.171168] pci 0000:00:1f.2: reg 0x14: [io 0x50a0-0x50a3] [ 1.176737] pci 0000:00:1f.2: reg 0x18: [io 0x5090-0x5097] [ 1.182307] pci 0000:00:1f.2: reg 0x1c: [io 0x5080-0x5083] [ 1.187874] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 1.193443] pci 0000:00:1f.2: reg 0x24: [mem 0xb2619000-0xb26197ff] [ 1.199732] pci 0000:00:1f.2: PME# supported from D3hot [ 1.205018] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 1.211025] pci 0000:00:1f.3: reg 0x10: [mem 0xb2618000-0xb26180ff 64bit] [ 1.217817] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 1.223517] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000 [ 1.229537] pci 0000:01:00.0: reg 0x10: [mem 0xb2400000-0xb24fffff] [ 1.235819] pci 0000:01:00.0: reg 0x18: [io 0x4000-0x401f] [ 1.241393] pci 0000:01:00.0: reg 0x1c: [mem 0xb2500000-0xb2503fff] [ 1.247690] pci 0000:01:00.0: reg 0x30: [mem 0xb2300000-0xb23fffff pref] [ 1.254471] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.260613] pci 0000:01:00.0: System wakeup disabled by ACPI [ 1.269315] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.274271] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.280357] pci 0000:00:1c.0: bridge window [mem 0xb2300000-0xb25fffff] [ 1.287191] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 [ 1.293209] pci 0000:02:00.0: reg 0x10: [mem 0xb2100000-0xb21fffff] [ 1.299490] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 1.305064] pci 0000:02:00.0: reg 0x1c: [mem 0xb2200000-0xb2203fff] [ 1.311361] pci 0000:02:00.0: reg 0x30: [mem 0xb2000000-0xb20fffff pref] [ 1.318143] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.324285] pci 0000:02:00.0: System wakeup disabled by ACPI [ 1.332990] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.337948] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.344032] pci 0000:00:1c.1: bridge window [mem 0xb2000000-0xb22fffff] [ 1.350822] pci_bus 0000:00: on NUMA node 0 [ 1.358082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.365131] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.372181] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.379228] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.386279] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.394479] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.402677] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.409728] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.417043] ACPI: Enabled 4 GPEs in block 00 to 7F [ 1.421931] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.427581] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.435661] vgaarb: loaded [ 1.438363] vgaarb: bridge control possible 0000:00:02.0 [ 1.443709] SCSI subsystem initialized [ 1.447484] libata version 3.00 loaded. [ 1.451330] ACPI: bus type USB registered [ 1.455347] usbcore: registered new interface driver usbfs [ 1.460831] usbcore: registered new interface driver hub [ 1.466146] usbcore: registered new device driver usb [ 1.471210] pps_core: LinuxPPS API ver. 1 registered [ 1.476165] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.485282] PTP clock support registered [ 1.490019] Advanced Linux Sound Architecture Driver Initialized. [ 1.496108] PCI: Using ACPI for IRQ routing [ 1.501602] PCI: pci_cache_line_size set to 64 bytes [ 1.506592] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 1.512586] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 1.518581] e820: reserve RAM buffer [mem 0xa98f2000-0xabffffff] [ 1.524577] e820: reserve RAM buffer [mem 0xac307000-0xafffffff] [ 1.530570] e820: reserve RAM buffer [mem 0xac5b1000-0xafffffff] [ 1.536564] e820: reserve RAM buffer [mem 0xad000000-0xafffffff] [ 1.542561] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff] [ 1.548815] Bluetooth: Core ver 2.21 [ 1.552390] NET: Registered protocol family 31 [ 1.556827] Bluetooth: HCI device and connection manager initialized [ 1.563168] Bluetooth: HCI socket layer initialized [ 1.568039] Bluetooth: L2CAP socket layer initialized [ 1.573085] Bluetooth: SCO socket layer initialized [ 1.578091] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.584380] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.592223] clocksource: Switched to clocksource hpet [ 1.604494] pnp: PnP ACPI init [ 1.607815] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 1.613732] system 00:00: [io 0x0a10-0x0a1f] has been reserved [ 1.619643] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 1.625554] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 1.631468] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.638486] pnp 00:01: [dma 0 disabled] [ 1.642360] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.649084] pnp 00:02: [dma 0 disabled] [ 1.652957] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.659659] pnp 00:03: [dma 0 disabled] [ 1.663526] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.670232] pnp 00:04: [dma 0 disabled] [ 1.674099] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.680718] system 00:05: [io 0x0680-0x069f] has been reserved [ 1.686634] system 00:05: [io 0xffff] has been reserved [ 1.691939] system 00:05: [io 0xffff] has been reserved [ 1.697244] system 00:05: [io 0xffff] has been reserved [ 1.702548] system 00:05: [io 0x1800-0x18fe] has been reserved [ 1.708459] system 00:05: [io 0x164e-0x164f] has been reserved [ 1.714371] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.721189] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.727746] system 00:07: [io 0x1854-0x1857] has been reserved [ 1.733661] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.741309] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.747914] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.754519] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.761125] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.767729] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.774334] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.780938] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.787542] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.794146] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 1.800752] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.807702] system 00:08: [mem 0xb0010000-0xb001ffff] has been reserved [ 1.814305] system 00:08: [mem 0xb0000000-0xb000ffff] has been reserved [ 1.820910] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.828373] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved [ 1.834984] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved [ 1.841590] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved [ 1.848195] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved [ 1.854797] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved [ 1.861401] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved [ 1.868006] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved [ 1.874611] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.882240] pnp: PnP ACPI: found 10 devices [ 1.892551] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.901453] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.906411] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.912497] pci 0000:00:1c.0: bridge window [mem 0xb2300000-0xb25fffff] [ 1.919281] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.924241] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.930328] pci 0000:00:1c.1: bridge window [mem 0xb2000000-0xb22fffff] [ 1.937114] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.943289] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.949458] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.956324] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window] [ 1.963186] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.968752] pci_bus 0000:01: resource 1 [mem 0xb2300000-0xb25fffff] [ 1.975008] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.980572] pci_bus 0000:02: resource 1 [mem 0xb2000000-0xb22fffff] [ 1.986852] NET: Registered protocol family 2 [ 1.991338] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.998638] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.005499] TCP: Hash tables configured (established 65536 bind 65536) [ 2.012039] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.018143] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.024719] NET: Registered protocol family 1 [ 2.029152] RPC: Registered named UNIX socket transport module. [ 2.035078] RPC: Registered udp transport module. [ 2.039779] RPC: Registered tcp transport module. [ 2.044477] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.050919] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.075337] PCI: CLS 0 bytes, default 64 [ 2.079302] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.085735] software IO TLB [mem 0xa1b77000-0xa5b77000] (64MB) mapped at [ffff8800a1b77000-ffff8800a5b76fff] [ 2.095641] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 2.103547] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.109286] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.114940] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 2.120332] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.126327] Scanning for low memory corruption every 60 seconds [ 2.132440] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 2.139062] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.147295] NFS: Registering the id_resolver key type [ 2.152350] Key type id_resolver registered [ 2.156529] Key type id_legacy registered [ 2.161258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.168644] io scheduler noop registered [ 2.172561] io scheduler deadline registered [ 2.176829] io scheduler cfq registered (default) [ 2.181805] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.187385] efifb: probing for efifb [ 2.190965] efifb: framebuffer at 0xc0000000, using 1920k, total 1920k [ 2.197482] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 2.203394] efifb: scrolling: redraw [ 2.206965] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.213607] Console: switching to colour frame buffer device 100x37 [ 2.220849] fb0: EFI VGA frame buffer device [ 2.225118] intel_idle: MWAIT substates: 0x11142120 [ 2.229987] intel_idle: v0.4.1 model 0x3D [ 2.234224] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.240141] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.248483] ACPI: Sleep Button [SLPB] [ 2.252173] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.260514] ACPI: Power Button [PWRB] [ 2.264203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.271591] ACPI: Power Button [PWRF] [ 2.275963] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.281620] ACPI: Thermal Zone [TZ00] (28 C) [ 2.286081] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.291734] ACPI: Thermal Zone [TZ01] (30 C) [ 2.296050] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.323012] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.350960] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.378899] 00:03: ttyS2 at I/O 0x3e8 (irq = 11, base_baud = 115200) is a 16550A [ 2.406921] 00:04: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A [ 2.426256] dw-apb-uart: probe of INT3435:00 failed with error -28 [ 2.432590] Linux agpgart interface v0.103 [ 2.436701] [drm] Initialized [ 2.439770] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 2.445165] [drm:get_allowed_dc_mask] Allowed DC state mask 00 [ 2.451029] [drm:intel_device_info_dump] i915 device info: gen=8, pciid=0x1626 rev=0x09 flags=is_broadwell,has_fbc,has_psr,has_runtime_pm,has_resource_streamer,has_rc6,has_dp_mst,has_gmbus_irq,has_hw_contexts,has_logical_ring_contexts,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 2.475279] [drm:intel_device_info_runtime_init] slice mask: 0003 [ 2.481547] [drm:intel_device_info_runtime_init] slice total: 2 [ 2.487459] [drm:intel_device_info_runtime_init] subslice total: 6 [ 2.493628] [drm:intel_device_info_runtime_init] subslice mask 0007 [ 2.499888] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 2.506405] [drm:intel_device_info_runtime_init] EU total: 48 [ 2.512143] [drm:intel_device_info_runtime_init] EU per subslice: 8 [ 2.518399] [drm:intel_device_info_runtime_init] has slice power gating: y [ 2.525263] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 2.532389] [drm:intel_device_info_runtime_init] has EU power gating: n [ 2.538992] [drm:intel_sanitize_options] ppgtt mode: 3 [ 2.544122] [drm:intel_sanitize_options] use GPU sempahores? no [ 2.550044] [drm] Memory usable by graphics device = 4096M [ 2.555530] [drm:i915_ggtt_probe_hw] GMADR size = 256M [ 2.560661] [drm:i915_ggtt_probe_hw] GTT stolen size = 32M [ 2.566137] checking generic (c0000000 1e0000) vs hw (c0000000 10000000) [ 2.572829] fb: switching to inteldrmfb from EFI VGA [ 2.577801] Console: switching to colour dummy device 80x25 [ 2.583453] [drm] Replacing VGA console driver [ 2.587908] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K [ 2.596898] [drm:intel_opregion_setup] graphic opregion physical addr: 0xacd15018 [ 2.604374] [drm:intel_opregion_setup] Public ACPI methods supported [ 2.610720] [drm:intel_opregion_setup] SWSCI supported [ 2.621925] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 2.629664] [drm:intel_opregion_setup] ASLE supported [ 2.634710] [drm:intel_opregion_setup] ASLE extension supported [ 2.640623] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 2.648397] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.654999] [drm] Driver supports precise vblank timestamp query. [ 2.661084] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 2.667428] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 189 [ 2.675421] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.691473] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 2.699355] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (15) [ 2.706834] [drm:parse_lfp_panel_data] Panel type: 14 (VBT) [ 2.712396] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 2.718742] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 2.725694] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 148500 1920 2008 2053 2200 1080 1083 1089 1125 0x8 0xa [ 2.737064] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 2.743150] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 2.754432] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 2.761905] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.773275] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 2.780572] [drm:parse_driver_features] DRRS State Enabled:1 [ 2.786224] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 2.793522] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 2.799778] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.807075] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 2.813333] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.820633] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 2.826887] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.834185] [drm:parse_ddi_port] VBT HDMI level shift for port D: 3 [ 2.840477] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 2.846914] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [ 2.852565] [drm:intel_power_well_enable] enabling always-on [ 2.858215] [drm:intel_power_well_enable] enabling display [ 2.863916] [drm:intel_fbc_init] Sanitized enable_fbc value: 1 [ 2.869745] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 2.876612] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 2.883561] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 2.890514] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 2.897552] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 2.904589] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 2.911365] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 2.918230] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 2.925093] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 2.932044] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 2.938995] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 2.945773] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 2.952638] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 2.959502] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 2.966452] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 2.973406] [drm:intel_modeset_init] 3 display pipes available. [ 2.979327] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz [ 2.985847] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz [ 2.992364] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz [ 2.998882] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.008739] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 3.015445] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 6000 [ 3.022742] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 3.030820] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.041844] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 3.050012] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 3.063812] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking [ 3.097978] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -5 [ 3.105457] [drm] failed to retrieve link info, disabling eDP [ 3.111198] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 3.117457] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 [ 3.125286] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 3.132262] [drm:intel_dp_init_connector] Adding DP connector on port C [ 3.138879] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 3.145862] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 3.154199] [drm:intel_modeset_readout_hw_state] [CRTC:30:pipe B] hw state readout: disabled [ 3.162623] [drm:intel_modeset_readout_hw_state] [CRTC:34:pipe C] hw state readout: disabled [ 3.167255] tsc: Refined TSC clocksource calibration: 2194.918 MHz [ 3.167260] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns [ 3.187203] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 3.196407] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 3.205610] [drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 3.214557] [drm:intel_modeset_readout_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 3.223934] [drm:intel_modeset_readout_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 3.233399] [drm:intel_modeset_readout_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 3.242863] [drm:intel_modeset_readout_hw_state] [ENCODER:36:DDI B] hw state readout: enabled, pipe A [ 3.252067] [drm:intel_modeset_readout_hw_state] [ENCODER:41:DDI C] hw state readout: disabled, pipe A [ 3.261357] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP-MST A] hw state readout: disabled, pipe A [ 3.270908] [drm:intel_modeset_readout_hw_state] [ENCODER:44:DP-MST B] hw state readout: disabled, pipe B [ 3.280459] [drm:intel_modeset_readout_hw_state] [ENCODER:45:DP-MST C] hw state readout: disabled, pipe C [ 3.290010] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:HDMI-A-1] hw state readout: enabled [ 3.298954] [drm:intel_modeset_readout_hw_state] [CONNECTOR:42:DP-1] hw state readout: disabled [ 3.307640] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled [ 3.316678] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff880245315000 for pipe A [ 3.326491] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3.331966] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.338226] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.348383] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.358107] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.368266] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.374261] [drm:intel_dump_pipe_config] requested mode: [ 3.379567] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 3.391111] [drm:intel_dump_pipe_config] adjusted mode: [ 3.396328] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 3.407872] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9 [ 3.419156] [drm:intel_dump_pipe_config] port clock: 154000 [ 3.424721] [drm:intel_dump_pipe_config] pipe src size: 800x600 [ 3.430633] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.438711] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.449216] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x078004b0, enabled [ 3.457725] [drm:intel_dump_pipe_config] ips: 0 [ 3.462249] [drm:intel_dump_pipe_config] double wide: 0 [ 3.467468] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0xb04d062d spll: 0x0 [ 3.475112] [drm:intel_dump_pipe_config] planes on this crtc [ 3.480761] [drm:intel_dump_pipe_config] [PLANE:23:primary A] disabled, scaler_id = 0 [ 3.488581] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 3.496311] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 3.504042] [drm:intel_dump_pipe_config] [CRTC:30:pipe B][setup_hw_state] config ffff880245316000 for pipe B [ 3.513852] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.519329] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.525500] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.535658] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.545383] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.555540] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.561539] [drm:intel_dump_pipe_config] requested mode: [ 3.566842] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.574919] [drm:intel_dump_pipe_config] adjusted mode: [ 3.580138] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.588216] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.596901] [drm:intel_dump_pipe_config] port clock: 0 [ 3.602032] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.607595] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.615674] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.626177] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.634775] [drm:intel_dump_pipe_config] ips: 0 [ 3.639299] [drm:intel_dump_pipe_config] double wide: 0 [ 3.644515] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.651553] [drm:intel_dump_pipe_config] planes on this crtc [ 3.657206] [drm:intel_dump_pipe_config] [PLANE:28:primary B] disabled, scaler_id = 0 [ 3.665023] [drm:intel_dump_pipe_config] [PLANE:29:cursor B] disabled, scaler_id = 0 [ 3.672753] [drm:intel_dump_pipe_config] [PLANE:31:sprite B] disabled, scaler_id = 0 [ 3.680485] [drm:intel_dump_pipe_config] [CRTC:34:pipe C][setup_hw_state] config ffff880245317000 for pipe C [ 3.690296] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 3.695774] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.701945] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.712102] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.721827] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.731985] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.737980] [drm:intel_dump_pipe_config] requested mode: [ 3.743286] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.751362] [drm:intel_dump_pipe_config] adjusted mode: [ 3.756583] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.764664] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.773347] [drm:intel_dump_pipe_config] port clock: 0 [ 3.778477] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.784041] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.792120] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.802624] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.811223] [drm:intel_dump_pipe_config] ips: 0 [ 3.815746] [drm:intel_dump_pipe_config] double wide: 0 [ 3.820963] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.828001] [drm:intel_dump_pipe_config] planes on this crtc [ 3.833652] [drm:intel_dump_pipe_config] [PLANE:32:primary C] disabled, scaler_id = 0 [ 3.841470] [drm:intel_dump_pipe_config] [PLANE:33:cursor C] disabled, scaler_id = 0 [ 3.849201] [drm:intel_dump_pipe_config] [PLANE:35:sprite C] disabled, scaler_id = 0 [ 3.856931] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling [ 3.865183] [drm:intel_modeset_setup_hw_state] LCPLL 1350 enabled but not in use, disabling [ 3.873519] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling [ 3.881865] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00 [ 3.892718] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000 [ 3.905652] [drm:i915_pages_create_for_stolen] offset=0x0, size=1921024 [ 3.912260] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880244a98000 [ 3.920130] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1d5000, fffff000] [ 3.927701] [drm:i915_gem_context_init] LR context support initialized [ 3.934223] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000 [ 3.941695] [drm:i915_pages_create_for_stolen] offset=0x1d5000, size=4096 [ 3.948476] [drm:intel_engine_create_scratch] render ring pipe control offset: 0xffffe000 [ 3.956779] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 3.964255] [drm:i915_pages_create_for_stolen] offset=0x1d6000, size=16384 [ 3.971281] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 3.978758] [drm:i915_pages_create_for_stolen] offset=0x1da000, size=16384 [ 3.985765] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 3.993247] [drm:i915_pages_create_for_stolen] offset=0x1de000, size=16384 [ 4.000242] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 4.007720] [drm:i915_pages_create_for_stolen] offset=0x1e2000, size=16384 [ 4.014711] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 4.022192] [drm:i915_pages_create_for_stolen] offset=0x1e6000, size=16384 [ 4.029071] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 4.035853] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 4.042721] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 4.049244] [drm:gen8_init_common_ring] Execlists enabled for bsd2 ring [ 4.055851] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 4.063584] [drm:intel_guc_setup] GuC fw status: path (null), fetch NONE, load NONE [ 4.071234] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz [ 4.077814] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 4.084332] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 4.091368] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 4.098406] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 4.104752] [drm:intel_fbdev_init_bios] fb not wide enough for plane A (7680 vs 3200) [ 4.112569] [drm:intel_fbdev_init_bios] BIOS fb not suitable for all pipes, not using [ 4.120677] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-1 [ 4.129283] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 4.138772] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.146005] [drm:asle_set_backlight] bclp = 0x80000002 [ 4.146200] acpi device:10: registered as cooling_device9 [ 4.146295] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 4.146336] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 4.146361] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] [ 4.146362] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1] [ 4.153687] brd: module loaded [ 4.154960] loop: module loaded [ 4.155077] Uniform Multi-Platform E-IDE driver [ 4.155106] ide-gd driver 1.18 [ 4.155110] ide-cd driver 5.00 [ 4.155158] ahci 0000:00:1f.2: version 3.0 [ 4.155378] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 4.155380] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 4.156054] scsi host0: ahci [ 4.156188] scsi host1: ahci [ 4.156299] scsi host2: ahci [ 4.156396] scsi host3: ahci [ 4.156443] ata1: FORCE: PHY spd limit set to 3.0Gbps [ 4.156444] ata1: SATA max UDMA/133 abar m2048@0xb2619000 port 0xb2619100 irq 41 [ 4.156446] ata2: FORCE: PHY spd limit set to 3.0Gbps [ 4.156446] ata2: SATA max UDMA/133 abar m2048@0xb2619000 port 0xb2619180 irq 41 [ 4.156447] ata3: DUMMY [ 4.156448] ata4: DUMMY [ 4.156492] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 4.156515] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.156515] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.156528] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 4.156528] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 4.156543] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.156544] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.156558] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 4.156558] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.159276] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.159277] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.159451] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.159454] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] status updated from unknown to connected [ 4.159468] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 4.159471] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes : [ 4.159473] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 4.159475] [drm:drm_mode_debug_printmodeline] Modeline 51:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 4.159476] [drm:drm_mode_debug_printmodeline] Modeline 52:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.159478] [drm:drm_mode_debug_printmodeline] Modeline 53:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 4.159479] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.159481] [drm:drm_mode_debug_printmodeline] Modeline 54:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.159482] [drm:drm_mode_debug_printmodeline] Modeline 55:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 4.159483] [drm:drm_mode_debug_printmodeline] Modeline 56:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.159485] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] [ 4.159486] [drm:intel_dp_detect] [CONNECTOR:42:DP-1] [ 4.159489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] status updated from unknown to disconnected [ 4.159489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] disconnected [ 4.159490] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 4.159491] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 4.159663] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.159664] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.159836] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.159837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 4.160008] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.160009] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.160175] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.160177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] status updated from unknown to disconnected [ 4.160179] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 4.160180] [drm:drm_setup_crtcs] [ 4.160181] [drm:drm_enable_connectors] connector 37 enabled? yes [ 4.160182] [drm:drm_enable_connectors] connector 42 enabled? no [ 4.160182] [drm:drm_enable_connectors] connector 46 enabled? no [ 4.160184] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1 [ 4.160185] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 0 [ 4.160186] [drm:intel_fb_initial_config] connector HDMI-A-1 on [CRTC:26:pipe A]: 1920x1200 [ 4.160187] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 4.160187] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 4.160189] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 26 (0,0) [ 4.160191] [drm:intelfb_create] no BIOS fb, allocating a new one [ 4.160192] [drm:i915_gem_object_create_stolen] creating stolen object: size=8ca000 [ 4.160195] [drm:i915_pages_create_for_stolen] offset=0x1ea000, size=9216000 [ 4.161030] [drm:intelfb_create] allocated 1920x1200 fb: 0x0020a000 [ 4.184700] pps pps0: new PPS source ptp0 [ 4.184702] igb 0000:01:00.0: added PHC on eth0 [ 4.184703] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.184705] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:4c:c1:01:2e:67 [ 4.184779] igb 0000:01:00.0: eth0: PBA No: 000200-000 [ 4.184780] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.192027] clocksource: Switched to clocksource tsc [ 4.214430] pps pps1: new PPS source ptp1 [ 4.214432] igb 0000:02:00.0: added PHC on eth1 [ 4.214433] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.214434] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) d0:4c:c1:01:2e:68 [ 4.214509] igb 0000:02:00.0: eth1: PBA No: 000200-000 [ 4.214511] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.214558] usbcore: registered new interface driver kaweth [ 4.214559] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.214566] usbcore: registered new interface driver pegasus [ 4.214573] usbcore: registered new interface driver rtl8150 [ 4.214582] usbcore: registered new interface driver asix [ 4.214589] usbcore: registered new interface driver ax88179_178a [ 4.214597] usbcore: registered new interface driver cdc_ether [ 4.214604] usbcore: registered new interface driver dm9601 [ 4.214614] usbcore: registered new interface driver smsc75xx [ 4.214624] usbcore: registered new interface driver smsc95xx [ 4.214630] usbcore: registered new interface driver net1080 [ 4.214638] usbcore: registered new interface driver cdc_subset [ 4.214644] usbcore: registered new interface driver zaurus [ 4.214652] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 4.214660] usbcore: registered new interface driver int51x1 [ 4.214670] usbcore: registered new interface driver cdc_ncm [ 4.214688] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.214688] ehci-pci: EHCI PCI platform driver [ 4.214819] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.214825] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.214840] ehci-pci 0000:00:1d.0: debug port 2 [ 4.218737] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.218747] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb261a000 [ 4.224254] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.224429] hub 1-0:1.0: USB hub found [ 4.224434] hub 1-0:1.0: 2 ports detected [ 4.224578] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.224581] ohci-pci: OHCI PCI platform driver [ 4.224592] uhci_hcd: USB Universal Host Controller Interface driver [ 4.224720] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.224725] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.225848] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 4.225853] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.226088] hub 2-0:1.0: USB hub found [ 4.226107] hub 2-0:1.0: 11 ports detected [ 4.230253] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.230256] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.230434] hub 3-0:1.0: USB hub found [ 4.230443] hub 3-0:1.0: 4 ports detected [ 4.232321] usbcore: registered new interface driver usb-storage [ 4.232339] usbcore: registered new interface driver usbserial [ 4.232346] usbcore: registered new interface driver usbserial_generic [ 4.232352] usbserial: USB Serial support registered for generic [ 4.232361] usbcore: registered new interface driver ftdi_sio [ 4.232367] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.232397] usbcore: registered new interface driver pl2303 [ 4.232402] usbserial: USB Serial support registered for pl2303 [ 4.232434] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.232932] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.232969] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.233104] mousedev: PS/2 mouse device common for all mice [ 4.233310] rtc_cmos 00:06: RTC can wake from S4 [ 4.233534] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.233574] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.233587] i2c /dev entries driver [ 4.233853] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.238725] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.238749] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 4.238870] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.238876] md: linear personality registered for level -1 [ 4.238877] md: raid0 personality registered for level 0 [ 4.238878] md: raid1 personality registered for level 1 [ 4.238878] md: raid10 personality registered for level 10 [ 4.238879] md: multipath personality registered for level -4 [ 4.238880] md: faulty personality registered for level -5 [ 4.238967] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.239022] intel_pstate: Intel P-state driver initializing [ 4.240079] sdhci: Secure Digital Host Controller Interface driver [ 4.240080] sdhci: Copyright(c) Pierre Ossman [ 4.258255] mmc0: SDHCI controller on ACPI [INT3436:00] using ADMA [ 4.258279] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.258361] usbcore: registered new interface driver usbhid [ 4.258361] usbhid: USB HID core driver [ 4.258361] intel_telemetry_core Init [ 4.258362] intel_telemetry: version 1.0.0 loaded [ 4.258555] u32 classifier [ 4.258556] Actions configured [ 4.258614] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 4.258711] gre: GRE over IPv4 demultiplexor driver [ 4.258711] ip_gre: GRE over IPv4 tunneling driver [ 4.258865] Initializing XFRM netlink socket [ 4.258965] NET: Registered protocol family 10 [ 4.259284] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.259419] NET: Registered protocol family 17 [ 4.259423] NET: Registered protocol family 15 [ 4.259472] NET: Registered protocol family 36 [ 4.259477] Key type dns_resolver registered [ 4.259750] microcode: sig=0x306d4, pf=0x40, revision=0x24 [ 4.259870] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 4.259881] AVX2 version of gcm_enc/dec engaged. [ 4.259882] AES CTR mode by8 optimization enabled [ 4.260261] registered taskstats version 1 [ 4.260647] Btrfs loaded, crc32c=crc32c-generic [ 4.468733] ata1: SATA link down (SStatus 0 SControl 320) [ 4.468760] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 4.468988] ata2.00: ATA-8: 2.5" SATA SSD 3IE3, S15C14i, max UDMA/133 [ 4.468989] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 4.469235] ata2.00: configured for UDMA/133 [ 4.535256] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.595256] usb 2-4: new low-speed USB device number 2 using xhci_hcd [ 4.653827] hub 1-1:1.0: USB hub found [ 4.653917] hub 1-1:1.0: 8 ports detected [ 4.802197] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:046D:C30E.0001/input/input8 [ 4.853388] hid-generic 0003:046D:C30E.0001: input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:14.0-4/input0 [ 4.870662] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:046D:C30E.0002/input/input9 [ 4.922302] hid-generic 0003:046D:C30E.0002: input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:14.0-4/input1 [ 5.354783] [drm:asle_set_backlight] updating opregion backlight 2/255 [ 5.354785] [drm:asle_work] No request on ASLC interrupt 0x00000000 [ 5.354814] fbcon: inteldrmfb (fb0) is primary device [ 5.354905] [drm:connected_sink_compute_bpp] [CONNECTOR:37:HDMI-A-1] checking for sink bpp constrains [ 5.354906] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 5.354907] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output [ 5.354908] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI [ 5.354909] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 5.354911] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff8802446af800 for pipe A [ 5.354912] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5.354913] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 5.354914] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.354915] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.354916] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.354917] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.354917] [drm:intel_dump_pipe_config] requested mode: [ 5.354919] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 5.354920] [drm:intel_dump_pipe_config] adjusted mode: [ 5.354921] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 5.354923] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9 [ 5.354923] [drm:intel_dump_pipe_config] port clock: 154000 [ 5.354924] [drm:intel_dump_pipe_config] pipe src size: 1920x1200 [ 5.354925] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5.354926] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.354927] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.354927] [drm:intel_dump_pipe_config] ips: 1 [ 5.354928] [drm:intel_dump_pipe_config] double wide: 0 [ 5.354929] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0xb04d062d spll: 0x0 [ 5.354929] [drm:intel_dump_pipe_config] planes on this crtc [ 5.354932] [drm:intel_dump_pipe_config] [PLANE:23:primary A] enabled [ 5.354933] [drm:intel_dump_pipe_config] FB:48, fb = 800x600 format = XR24 little-endian (0x34325258) [ 5.354933] [drm:intel_dump_pipe_config] scaler:0 src 0x0+800+600 dst 0x0+800+600 [ 5.354934] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 5.354935] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 5.354937] [drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500 [ 5.355958] [drm:intel_find_shared_dpll] [CRTC:26:pipe A] allocated WRPLL 1 [ 5.355959] [drm:intel_reference_shared_dpll] using WRPLL 1 for pipe A [ 5.355977] [drm:intel_disable_pipe] disabling pipe A [ 5.371404] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 26 [ 5.371407] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 5.373471] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz [ 5.373473] [drm:verify_encoder_state] [ENCODER:36:DDI B] [ 5.373474] [drm:verify_encoder_state] [ENCODER:41:DDI C] [ 5.373477] [drm:verify_encoder_state] [ENCODER:43:DP-MST A] [ 5.373478] [drm:verify_encoder_state] [ENCODER:44:DP-MST B] [ 5.373478] [drm:verify_encoder_state] [ENCODER:45:DP-MST C] [ 5.373479] [drm:intel_connector_verify_state] [CONNECTOR:42:DP-1] [ 5.373481] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2] [ 5.373483] [drm:verify_single_dpll_state] WRPLL 1 [ 5.373484] [drm:verify_single_dpll_state] WRPLL 2 [ 5.373485] [drm:verify_single_dpll_state] SPLL [ 5.373486] [drm:verify_single_dpll_state] LCPLL 810 [ 5.373486] [drm:verify_single_dpll_state] LCPLL 1350 [ 5.373487] [drm:verify_single_dpll_state] LCPLL 2700 [ 5.373490] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 1, on? 0) for crtc 26 [ 5.373491] [drm:intel_enable_shared_dpll] enabling WRPLL 1 [ 5.373722] [drm:intel_enable_pipe] enabling pipe A [ 5.373730] [drm:intel_fbc_alloc_cfb] reserved 9216000 bytes of contiguous stolen space for FBC, threshold: 1 [ 5.373731] [drm:intel_fbc_enable] Enabling FBC on pipe A [ 5.390519] [drm:intel_connector_verify_state] [CONNECTOR:37:HDMI-A-1] [ 5.390524] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 5.390534] [drm:verify_single_dpll_state] WRPLL 1 [ 5.390551] [drm:drm_fb_helper_hotplug_event] [ 5.390552] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] [ 5.390553] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1] [ 5.403621] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.403622] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 5.403807] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.403824] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.403829] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes : [ 5.403831] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 5.403833] [drm:drm_mode_debug_printmodeline] Modeline 51:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 5.403834] [drm:drm_mode_debug_printmodeline] Modeline 52:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.403836] [drm:drm_mode_debug_printmodeline] Modeline 53:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 5.403837] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.403839] [drm:drm_mode_debug_printmodeline] Modeline 54:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.403840] [drm:drm_mode_debug_printmodeline] Modeline 55:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.403841] [drm:drm_mode_debug_printmodeline] Modeline 56:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.403845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] [ 5.403846] [drm:intel_dp_detect] [CONNECTOR:42:DP-1] [ 5.403849] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] disconnected [ 5.403850] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 5.403850] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 5.404035] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.404036] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.404217] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.404218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 5.404403] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.404404] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.404587] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.404588] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 5.404594] [drm:drm_setup_crtcs] [ 5.404596] [drm:drm_enable_connectors] connector 37 enabled? yes [ 5.404596] [drm:drm_enable_connectors] connector 42 enabled? no [ 5.404597] [drm:drm_enable_connectors] connector 46 enabled? no [ 5.404599] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1 [ 5.404599] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 0 [ 5.404601] [drm:intel_fb_initial_config] connector HDMI-A-1 on [CRTC:26:pipe A]: 1920x1200 [ 5.404601] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 5.404602] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 5.404603] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 26 (0,0) [ 5.429068] Console: switching to colour frame buffer device 240x75 [ 5.599338] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 6.191076] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.197263] console [netcon0] enabled [ 6.200925] netconsole: network logging started [ 6.201428] scsi 1:0:0:0: Direct-Access ATA 2.5" SATA SSD 3I 14i PQ: 0 ANSI: 5 [ 6.213583] rtc_cmos 00:06: setting system clock to 2016-10-03 11:59:33 UTC (1475495973) [ 6.221773] ALSA device list: [ 6.224736] No soundcards found. [ 6.228493] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 6.228495] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 6.241304] sd 1:0:0:0: [sda] Write Protect is off [ 6.246090] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.251145] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.261760] sda: sda1 sda2 sda3 sda4 [ 6.265727] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.270377] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 6.283036] random: fast init done [ 6.286883] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.294554] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 6.303792] devtmpfs: mounted [ 6.307582] Freeing unused kernel memory: 1380K (ffffffff8214b000 - ffffffff822a4000) [ 6.315401] Write protecting the kernel read-only data: 16384k [ 6.321721] Freeing unused kernel memory: 1868K (ffff88000222d000 - ffff880002400000) [ 6.329848] Freeing unused kernel memory: 132K (ffff8800027df000 - ffff880002800000) [ 6.434871] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.452998] systemd[1]: Detected architecture x86-64. [ 6.458345] systemd[1]: Set hostname to . [ 6.575673] systemd[1]: Reached target Remote File Systems. [ 6.581314] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.588339] systemd[1]: Listening on Network Service Netlink Socket. [ 6.594714] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.601308] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.609274] systemd[1]: Listening on udev Control Socket. [ 6.614703] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.632775] EXT4-fs (sda2): re-mounted. Opts: (null) [ 6.731511] systemd-journald[165]: Received request to flush runtime journal from PID 1 [ 6.951123] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k SS [ 6.999670] EXT4-fs (sda4): recovery complete [ 7.014065] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 7.466507] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.506693] [drm:i915_gem_open] [ 7.517573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.566048] [drm:i915_gem_open] [ 7.572997] [drm:drm_mode_addfb2] [FB:58] [ 7.622837] [drm:drm_mode_addfb2] [FB:58] [ 7.628050] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 7.635526] [drm:i915_pages_create_for_stolen] offset=0x1000, size=16384 [ 7.644314] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] [ 7.649192] [drm:drm_mode_setcrtc] [CONNECTOR:37:HDMI-A-1] [ 7.661034] [drm:drm_mode_setcrtc] [CRTC:30:pipe B] [ 7.665928] [drm:drm_mode_setcrtc] [CRTC:34:pipe C] [ 8.088741] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 8.096232] [drm:i915_pages_create_for_stolen] offset=0x5000, size=16384 [ 10.482863] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 10.492432] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 37.663749] random: crng init done [ 56.857352] [drm:i915_gem_open] [ 56.929588] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 56.936804] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 56.944280] [drm:i915_pages_create_for_stolen] offset=0x9000, size=16384 [ 56.952994] [drm:i915_gem_context_create_ioctl] HW context 2 created [ 56.959984] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 56.967459] [drm:i915_pages_create_for_stolen] offset=0xd000, size=16384 [ 61.484682] ------------[ cut here ]------------ [ 61.489300] WARNING: CPU: 2 PID: 0 at drivers/gpu/drm/i915/intel_uncore.c:802 __unclaimed_reg_debug+0x51/0x60 [ 61.499196] Unclaimed write to register 0x44324 [ 61.503715] Modules linked in: [ 61.506777] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.8.0-rc8-inteltest-01276-g92c7457 #403 [ 61.515285] Hardware name: To be filled by O.E.M. To be filled by O.E.M./SMB-2601, BIOS 5.011 09/21/2016 [ 61.524747] 0000000000000000 ffff88024ed03c98 ffffffff8141058d ffff88024ed03ce8 [ 61.532179] 0000000000000000 ffff88024ed03cd8 ffffffff81080ba1 00000322438ab900 [ 61.539608] 0000000000000000 0000000000044324 0000000000000000 00000000ffffff9f [ 61.547042] Call Trace: [ 61.549480] [] dump_stack+0x4f/0x72 [ 61.555233] [] __warn+0xd1/0xf0 [ 61.560015] [] warn_slowpath_fmt+0x4f/0x60 [ 61.565751] [] ? _raw_spin_unlock_irqrestore+0x18/0x30 [ 61.572526] [] ? __wake_up+0x44/0x50 [ 61.577742] [] __unclaimed_reg_debug+0x51/0x60 [ 61.583824] [] gen8_write32+0x217/0x2a0 [ 61.589300] [] snb_update_pm_irq+0x76/0xd0 [ 61.595038] [] gen6_disable_pm_irq+0x19/0x40 [ 61.600947] [] gen6_rps_irq_handler+0x67/0xf0 [ 61.606939] [] gen8_gt_irq_handler+0xbf/0x200 [ 61.612932] [] gen8_irq_handler+0x93/0x6b0 [ 61.618667] [] __handle_irq_event_percpu+0x3d/0x1f0 [ 61.625180] [] handle_irq_event_percpu+0x23/0x60 [ 61.631434] [] handle_irq_event+0x39/0x60 [ 61.637085] [] handle_edge_irq+0x90/0x150 [ 61.642736] [] handle_irq+0x1d/0x30 [ 61.647866] [] do_IRQ+0x57/0xf0 [ 61.652646] [] common_interrupt+0x7f/0x7f [ 61.658292] [] ? cpuidle_enter_state+0xca/0x2a0 [ 61.665084] [] cpuidle_enter+0x17/0x20 [ 61.670474] [] cpu_startup_entry+0x21b/0x3d0 [ 61.676381] [] start_secondary+0xf0/0x100 [ 61.682032] ---[ end trace 11468fa4238d3e79 ]---