[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2016-04-29 [ 0.000000] Linux version 4.8.0-rc8-inteltest-01278-g6cdb3f7 (anssiha@localhost) (gcc version 4.9.2 (GCC) ) #404 SMP PREEMPT Tue Oct 4 10:38:05 EEST 2016 [ 0.000000] Command line: BOOT_IMAGE=/fwinstaller/vmlinuztest-gpunightly-microcode LABEL=boot root=PARTUUID=1b7e56fd-a371-49ca-9504-b31a8e7572e5 quiet splash libata.force=3.0G consoleblank=0 rootfstype=ext4 console=ttyS0,115200 ignore_loglevel drm.debug=0xe [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a98f1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a98f2000-0x00000000a9b5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a9b60000-0x00000000ac306fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac307000-0x00000000ac3c1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac3c2000-0x00000000ac5b0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac5b1000-0x00000000acd33fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000acd34000-0x00000000acffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad800000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0xacfb2198 ACPI=0xaccf7000 ACPI 2.0=0xaccf7000 SMBIOS=0xf05b0 MPS=0xfd640 [ 0.000000] esrt: Reserving ESRT space from 0x00000000acfb2198 to 0x00000000acfb21d0. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./SMB-2601, BIOS 5.011 09/21/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00A0000000 mask 7FF8000000 write-back [ 0.000000] 3 base 00A8000000 mask 7FFC000000 write-back [ 0.000000] 4 base 00AC000000 mask 7FFF000000 write-back [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7F80000000 write-back [ 0.000000] 7 base 0260000000 mask 7FE0000000 uncachable [ 0.000000] 8 base 0250000000 mask 7FF0000000 uncachable [ 0.000000] 9 base 024F000000 mask 7FFF000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x02bbb000, 0x02bbbfff] PGTABLE [ 0.000000] BRK [0x02bbc000, 0x02bbcfff] PGTABLE [ 0.000000] BRK [0x02bbd000, 0x02bbdfff] PGTABLE [ 0.000000] BRK [0x02bbe000, 0x02bbefff] PGTABLE [ 0.000000] BRK [0x02bbf000, 0x02bbffff] PGTABLE [ 0.000000] BRK [0x02bc0000, 0x02bc0fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000ACCF7000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000ACCF7090 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000ACD0C268 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000ACCF71C0 0150A1 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000ACD32F80 000040 [ 0.000000] ACPI: APIC 0x00000000ACD0C378 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000ACD0C400 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000ACD0C448 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000ACD0C4E8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000ACD0C528 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x00000000ACD0C560 000315 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000ACD0C878 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000ACD0C8C0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000ACD0D540 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000ACD0D5E0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000ACD0DB20 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000ACD0E698 005BB3 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000ACD14250 0000F8 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000ACD14348 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000024effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a98f1fff] [ 0.000000] node 0: [mem 0x00000000a9b60000-0x00000000ac306fff] [ 0.000000] node 0: [mem 0x00000000ac3c2000-0x00000000ac5b0fff] [ 0.000000] node 0: [mem 0x00000000acfff000-0x00000000acffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000024effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024effffff] [ 0.000000] On node 0 totalpages: 2077222 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 25 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10955 pages used for memmap [ 0.000000] DMA32 zone: 701065 pages, LIFO batch:31 [ 0.000000] Normal zone: 21440 pages used for memmap [ 0.000000] Normal zone: 1372160 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000ae000000-0x00000000afffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x33]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0x84]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0xd7]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] res dfl lint[0xab]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xb0000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88024ec00000 s101336 r8192 d29736 u524288 [ 0.000000] pcpu-alloc: s101336 r8192 d29736 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044738 [ 0.000000] Kernel command line: BOOT_IMAGE=/fwinstaller/vmlinuztest-gpunightly-microcode LABEL=boot root=PARTUUID=1b7e56fd-a371-49ca-9504-b31a8e7572e5 quiet splash libata.force=3.0G consoleblank=0 rootfstype=ext4 console=ttyS0,115200 ignore_loglevel drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8039588K/8308888K available (10398K kernel code, 1316K rwdata, 3964K rodata, 1380K init, 1072K bss, 269300K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU kthread priority: 1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.769 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.53 BogoMIPS (lpj=2194769) [ 0.010618] pid_max: default: 32768 minimum: 301 [ 0.015239] ACPI: Core revision 20160422 [ 0.038134] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.046365] Security Framework initialized [ 0.050486] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.057354] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.064868] CPU: Physical Processor ID: 0 [ 0.068877] CPU: Processor Core ID: 0 [ 0.072541] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.078541] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.085587] mce: CPU supports 7 MCE banks [ 0.089600] CPU0: Thermal monitoring enabled (TM1) [ 0.094397] process: using mwait in idle threads [ 0.099012] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.104406] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.110873] Freeing SMP alternatives memory: 40K (ffffffff822a4000 - ffffffff822ae000) [ 0.120147] ftrace: allocating 37955 entries in 149 pages [ 0.142253] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.148865] smpboot: Max logical packages: 2 [ 0.153575] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.169401] TSC deadline timer enabled [ 0.173142] smpboot: CPU0: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.183084] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.193414] ... version: 3 [ 0.197416] ... bit width: 48 [ 0.201506] ... generic registers: 4 [ 0.205511] ... value mask: 0000ffffffffffff [ 0.210814] ... max period: 0000ffffffffffff [ 0.216114] ... fixed-purpose events: 3 [ 0.220116] ... event mask: 000000070000000f [ 0.237660] x86: Booting SMP configuration: [ 0.241838] .... node #0, CPUs: #1 #2 #3 [ 0.441500] x86: Booted up 1 node, 4 CPUs [ 0.445692] smpboot: Total of 4 processors activated (17577.17 BogoMIPS) [ 0.456822] devtmpfs: initialized [ 0.460384] PM: Registering ACPI NVS region [mem 0xac5b1000-0xacd33fff] (7876608 bytes) [ 0.468503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.478252] xor: automatically using best checksumming function: [ 0.494263] avx : 28188.000 MB/sec [ 0.498442] pinctrl core: initialized pinctrl subsystem [ 0.503735] NET: Registered protocol family 16 [ 0.513257] cpuidle: using governor ladder [ 0.521357] cpuidle: using governor menu [ 0.525346] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.532900] ACPI: bus type PCI registered [ 0.536951] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.546242] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.553024] PCI: Using configuration type 1 for base access [ 0.565700] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.588645] raid6: sse2x1 gen() 7273 MB/s [ 0.609667] raid6: sse2x1 xor() 5410 MB/s [ 0.630698] raid6: sse2x2 gen() 8773 MB/s [ 0.651725] raid6: sse2x2 xor() 5941 MB/s [ 0.672749] raid6: sse2x4 gen() 10371 MB/s [ 0.693779] raid6: sse2x4 xor() 7183 MB/s [ 0.714806] raid6: avx2x1 gen() 14109 MB/s [ 0.735834] raid6: avx2x2 gen() 16351 MB/s [ 0.756860] raid6: avx2x4 gen() 18917 MB/s [ 0.761120] raid6: using algorithm avx2x4 gen() 18917 MB/s [ 0.766597] raid6: using avx2x2 recovery algorithm [ 0.771423] ACPI: Added _OSI(Module Device) [ 0.775601] ACPI: Added _OSI(Processor Device) [ 0.780037] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.784731] ACPI: Added _OSI(Processor Aggregator Device) [ 0.790744] ACPI: Executed 18 blocks of module-level executable AML code [ 0.805952] ACPI: Dynamic OEM Table Load: [ 0.809981] ACPI: SSDT 0xFFFF8802450A9400 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.819482] ACPI: Dynamic OEM Table Load: [ 0.823520] ACPI: SSDT 0xFFFF8802450C2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.833060] ACPI: Dynamic OEM Table Load: [ 0.837090] ACPI: SSDT 0xFFFF880245122200 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.847920] ACPI: Interpreter enabled [ 0.851595] ACPI: (supports S0 S3 S5) [ 0.855251] ACPI: Using IOAPIC for interrupt routing [ 0.860234] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.871673] ACPI: Power Resource [PG00] (on) [ 0.876297] ACPI: Power Resource [PG01] (on) [ 0.880915] ACPI: Power Resource [PG02] (on) [ 0.896366] ACPI: Power Resource [FN00] (off) [ 0.900792] ACPI: Power Resource [FN01] (off) [ 0.905217] ACPI: Power Resource [FN02] (off) [ 0.909643] ACPI: Power Resource [FN03] (off) [ 0.914067] ACPI: Power Resource [FN04] (off) [ 0.919503] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.925679] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.933959] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.940504] PCI host bridge to bus 0000:00 [ 0.944596] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.951407] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.958224] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.965696] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window] [ 0.973169] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.978700] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.984833] pci 0000:00:02.0: [8086:1626] type 00 class 0x030000 [ 0.990841] pci 0000:00:02.0: reg 0x10: [mem 0xb1000000-0xb1ffffff 64bit] [ 0.997624] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.004864] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 1.010577] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 1.016583] pci 0000:00:03.0: reg 0x10: [mem 0xb2614000-0xb2617fff 64bit] [ 1.023510] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 1.029552] pci 0000:00:14.0: reg 0x10: [mem 0xb2600000-0xb260ffff 64bit] [ 1.036385] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.042262] pci 0000:00:14.0: System wakeup disabled by ACPI [ 1.047961] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 1.053988] pci 0000:00:16.0: reg 0x10: [mem 0xb261c000-0xb261c01f 64bit] [ 1.060831] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.067011] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 1.073066] pci 0000:00:1b.0: reg 0x10: [mem 0xb2610000-0xb2613fff 64bit] [ 1.080567] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.086713] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 1.092397] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 1.098454] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.104609] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.110289] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400 [ 1.116346] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.122502] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 1.128190] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 1.134205] pci 0000:00:1d.0: reg 0x10: [mem 0xb261a000-0xb261a3ff] [ 1.140540] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.146678] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.152365] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 1.158538] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 1.164543] pci 0000:00:1f.2: reg 0x10: [io 0x50b0-0x50b7] [ 1.170113] pci 0000:00:1f.2: reg 0x14: [io 0x50a0-0x50a3] [ 1.175681] pci 0000:00:1f.2: reg 0x18: [io 0x5090-0x5097] [ 1.181250] pci 0000:00:1f.2: reg 0x1c: [io 0x5080-0x5083] [ 1.186819] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 1.192386] pci 0000:00:1f.2: reg 0x24: [mem 0xb2619000-0xb26197ff] [ 1.198675] pci 0000:00:1f.2: PME# supported from D3hot [ 1.203965] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 1.209972] pci 0000:00:1f.3: reg 0x10: [mem 0xb2618000-0xb26180ff 64bit] [ 1.216763] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 1.222466] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000 [ 1.228483] pci 0000:01:00.0: reg 0x10: [mem 0xb2400000-0xb24fffff] [ 1.234767] pci 0000:01:00.0: reg 0x18: [io 0x4000-0x401f] [ 1.240342] pci 0000:01:00.0: reg 0x1c: [mem 0xb2500000-0xb2503fff] [ 1.246635] pci 0000:01:00.0: reg 0x30: [mem 0xb2300000-0xb23fffff pref] [ 1.253414] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.259556] pci 0000:01:00.0: System wakeup disabled by ACPI [ 1.268225] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.273183] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.279268] pci 0000:00:1c.0: bridge window [mem 0xb2300000-0xb25fffff] [ 1.286106] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 [ 1.292123] pci 0000:02:00.0: reg 0x10: [mem 0xb2100000-0xb21fffff] [ 1.298404] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f] [ 1.303981] pci 0000:02:00.0: reg 0x1c: [mem 0xb2200000-0xb2203fff] [ 1.310277] pci 0000:02:00.0: reg 0x30: [mem 0xb2000000-0xb20fffff pref] [ 1.317055] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.323195] pci 0000:02:00.0: System wakeup disabled by ACPI [ 1.331884] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.336840] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.342925] pci 0000:00:1c.1: bridge window [mem 0xb2000000-0xb22fffff] [ 1.349716] pci_bus 0000:00: on NUMA node 0 [ 1.356941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.363988] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.371033] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.378083] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.385131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.393330] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.401531] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.408575] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.415874] ACPI: Enabled 4 GPEs in block 00 to 7F [ 1.420758] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.426408] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.434486] vgaarb: loaded [ 1.437187] vgaarb: bridge control possible 0000:00:02.0 [ 1.442540] SCSI subsystem initialized [ 1.446318] libata version 3.00 loaded. [ 1.450166] ACPI: bus type USB registered [ 1.454180] usbcore: registered new interface driver usbfs [ 1.459664] usbcore: registered new interface driver hub [ 1.464980] usbcore: registered new device driver usb [ 1.470042] pps_core: LinuxPPS API ver. 1 registered [ 1.474998] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.484115] PTP clock support registered [ 1.488869] Advanced Linux Sound Architecture Driver Initialized. [ 1.494957] PCI: Using ACPI for IRQ routing [ 1.500453] PCI: pci_cache_line_size set to 64 bytes [ 1.505443] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 1.511437] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 1.517432] e820: reserve RAM buffer [mem 0xa98f2000-0xabffffff] [ 1.523429] e820: reserve RAM buffer [mem 0xac307000-0xafffffff] [ 1.529428] e820: reserve RAM buffer [mem 0xac5b1000-0xafffffff] [ 1.535425] e820: reserve RAM buffer [mem 0xad000000-0xafffffff] [ 1.541422] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff] [ 1.547673] Bluetooth: Core ver 2.21 [ 1.551247] NET: Registered protocol family 31 [ 1.555685] Bluetooth: HCI device and connection manager initialized [ 1.562031] Bluetooth: HCI socket layer initialized [ 1.566902] Bluetooth: L2CAP socket layer initialized [ 1.571948] Bluetooth: SCO socket layer initialized [ 1.576951] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.583239] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.591082] clocksource: Switched to clocksource hpet [ 1.603391] pnp: PnP ACPI init [ 1.606722] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 1.612636] system 00:00: [io 0x0a10-0x0a1f] has been reserved [ 1.618548] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 1.624460] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 1.630374] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.637397] pnp 00:01: [dma 0 disabled] [ 1.641268] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.647993] pnp 00:02: [dma 0 disabled] [ 1.651861] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.658567] pnp 00:03: [dma 0 disabled] [ 1.662432] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.669140] pnp 00:04: [dma 0 disabled] [ 1.673005] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.679628] system 00:05: [io 0x0680-0x069f] has been reserved [ 1.685541] system 00:05: [io 0xffff] has been reserved [ 1.690844] system 00:05: [io 0xffff] has been reserved [ 1.696148] system 00:05: [io 0xffff] has been reserved [ 1.701453] system 00:05: [io 0x1800-0x18fe] has been reserved [ 1.707364] system 00:05: [io 0x164e-0x164f] has been reserved [ 1.713277] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.720101] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.726660] system 00:07: [io 0x1854-0x1857] has been reserved [ 1.732570] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.740218] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.746825] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.753427] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.760032] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.766636] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.773243] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.779847] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.786451] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.793057] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 1.799661] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.806613] system 00:08: [mem 0xb0010000-0xb001ffff] has been reserved [ 1.813217] system 00:08: [mem 0xb0000000-0xb000ffff] has been reserved [ 1.819822] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.827269] system 00:09: [mem 0xfe102000-0xfe102fff] has been reserved [ 1.833879] system 00:09: [mem 0xfe104000-0xfe104fff] has been reserved [ 1.840484] system 00:09: [mem 0xfe106000-0xfe106fff] has been reserved [ 1.847090] system 00:09: [mem 0xfe10e000-0xfe10efff] has been reserved [ 1.853694] system 00:09: [mem 0xfe112000-0xfe112fff] has been reserved [ 1.860298] system 00:09: [mem 0xfe111000-0xfe111007] has been reserved [ 1.866902] system 00:09: [mem 0xfe111014-0xfe111fff] has been reserved [ 1.873508] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.881139] pnp: PnP ACPI: found 10 devices [ 1.891408] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.900312] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.905272] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.911362] pci 0000:00:1c.0: bridge window [mem 0xb2300000-0xb25fffff] [ 1.918146] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.923108] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 1.929195] pci 0000:00:1c.1: bridge window [mem 0xb2000000-0xb22fffff] [ 1.935980] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.942152] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.948323] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.955186] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window] [ 1.962052] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.967615] pci_bus 0000:01: resource 1 [mem 0xb2300000-0xb25fffff] [ 1.973872] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 1.979438] pci_bus 0000:02: resource 1 [mem 0xb2000000-0xb22fffff] [ 1.985719] NET: Registered protocol family 2 [ 1.990209] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.997510] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.004381] TCP: Hash tables configured (established 65536 bind 65536) [ 2.010925] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.017035] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.023617] NET: Registered protocol family 1 [ 2.028052] RPC: Registered named UNIX socket transport module. [ 2.033974] RPC: Registered udp transport module. [ 2.038671] RPC: Registered tcp transport module. [ 2.043372] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.049814] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.074226] PCI: CLS 0 bytes, default 64 [ 2.078191] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.084624] software IO TLB [mem 0xa1b77000-0xa5b77000] (64MB) mapped at [ffff8800a1b77000-ffff8800a5b76fff] [ 2.094534] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 2.102443] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.108181] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.113836] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 2.119229] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.125217] Scanning for low memory corruption every 60 seconds [ 2.131325] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 2.137928] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.146174] NFS: Registering the id_resolver key type [ 2.151223] Key type id_resolver registered [ 2.155403] Key type id_legacy registered [ 2.160088] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.167478] io scheduler noop registered [ 2.171398] io scheduler deadline registered [ 2.175667] io scheduler cfq registered (default) [ 2.180640] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.186226] efifb: probing for efifb [ 2.189806] efifb: framebuffer at 0xc0000000, using 1920k, total 1920k [ 2.196326] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 2.202236] efifb: scrolling: redraw [ 2.205811] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.212464] Console: switching to colour frame buffer device 100x37 [ 2.219710] fb0: EFI VGA frame buffer device [ 2.223981] intel_idle: MWAIT substates: 0x11142120 [ 2.228850] intel_idle: v0.4.1 model 0x3D [ 2.233061] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.238981] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.247324] ACPI: Sleep Button [SLPB] [ 2.251017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.259358] ACPI: Power Button [PWRB] [ 2.263050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.270437] ACPI: Power Button [PWRF] [ 2.274830] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.280486] ACPI: Thermal Zone [TZ00] (28 C) [ 2.284951] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.290605] ACPI: Thermal Zone [TZ01] (30 C) [ 2.294928] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.321909] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.349876] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.377836] 00:03: ttyS2 at I/O 0x3e8 (irq = 11, base_baud = 115200) is a 16550A [ 2.405885] 00:04: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A [ 2.425163] dw-apb-uart: probe of INT3435:00 failed with error -28 [ 2.431480] Linux agpgart interface v0.103 [ 2.435590] [drm] Initialized [ 2.438664] [drm:intel_detect_pch] Found LynxPoint LP PCH [ 2.444060] [drm:get_allowed_dc_mask] Allowed DC state mask 00 [ 2.449917] [drm:intel_device_info_dump] i915 device info: gen=8, pciid=0x1626 rev=0x09 flags=is_broadwell,has_fbc,has_psr,has_runtime_pm,has_resource_streamer,has_rc6,has_dp_mst,has_gmbus_irq,has_hw_contexts,has_logical_ring_contexts,has_hotplug,has_llc,has_ddi,has_fpga_dbg, [ 2.474166] [drm:intel_device_info_runtime_init] slice mask: 0003 [ 2.480439] [drm:intel_device_info_runtime_init] slice total: 2 [ 2.486349] [drm:intel_device_info_runtime_init] subslice total: 6 [ 2.492522] [drm:intel_device_info_runtime_init] subslice mask 0007 [ 2.498780] [drm:intel_device_info_runtime_init] subslice per slice: 3 [ 2.505298] [drm:intel_device_info_runtime_init] EU total: 48 [ 2.511035] [drm:intel_device_info_runtime_init] EU per subslice: 8 [ 2.517292] [drm:intel_device_info_runtime_init] has slice power gating: y [ 2.524157] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 2.531281] [drm:intel_device_info_runtime_init] has EU power gating: n [ 2.537887] [drm:intel_sanitize_options] ppgtt mode: 3 [ 2.543019] [drm:intel_sanitize_options] use GPU sempahores? no [ 2.548939] [drm] Memory usable by graphics device = 4096M [ 2.554436] [drm:i915_ggtt_probe_hw] GMADR size = 256M [ 2.559568] [drm:i915_ggtt_probe_hw] GTT stolen size = 32M [ 2.565047] checking generic (c0000000 1e0000) vs hw (c0000000 10000000) [ 2.571737] fb: switching to inteldrmfb from EFI VGA [ 2.576711] Console: switching to colour dummy device 80x25 [ 2.582357] [drm] Replacing VGA console driver [ 2.586809] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K [ 2.595801] [drm:intel_opregion_setup] graphic opregion physical addr: 0xacd15018 [ 2.603279] [drm:intel_opregion_setup] Public ACPI methods supported [ 2.609625] [drm:intel_opregion_setup] SWSCI supported [ 2.620873] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 2.628612] [drm:intel_opregion_setup] ASLE supported [ 2.633654] [drm:intel_opregion_setup] ASLE extension supported [ 2.639567] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 2.647350] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.653955] [drm] Driver supports precise vblank timestamp query. [ 2.660039] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 2.666383] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 189 [ 2.674375] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 2.690428] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 2.698307] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (15) [ 2.705787] [drm:parse_lfp_panel_data] Panel type: 14 (VBT) [ 2.711351] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 2.717696] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 2.724648] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 0 148500 1920 2008 2053 2200 1080 1083 1089 1125 0x8 0xa [ 2.736018] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 2.742102] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255 [ 2.753388] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 2.760860] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.772231] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 2.779530] [drm:parse_driver_features] DRRS State Enabled:1 [ 2.785181] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 2.792480] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0 [ 2.798736] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.806035] [drm:parse_ddi_port] VBT HDMI level shift for port B: 3 [ 2.812291] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.819592] [drm:parse_ddi_port] VBT HDMI level shift for port C: 3 [ 2.825848] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 2.833146] [drm:parse_ddi_port] VBT HDMI level shift for port D: 3 [ 2.839439] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 2.845874] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [ 2.851529] [drm:intel_power_well_enable] enabling always-on [ 2.857182] [drm:intel_power_well_enable] enabling display [ 2.862884] [drm:intel_fbc_init] Sanitized enable_fbc value: 1 [ 2.868711] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 2.875574] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec) [ 2.882524] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec) [ 2.889476] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec) [ 2.896515] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 2.903551] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 2.910330] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec) [ 2.917194] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec) [ 2.924060] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec) [ 2.931012] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 2.937962] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 2.944741] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec) [ 2.951608] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec) [ 2.958474] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec) [ 2.965424] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 2.972378] [drm:intel_modeset_init] 3 display pipes available. [ 2.978300] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz [ 2.984821] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz [ 2.991336] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz [ 2.997856] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.007713] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 3.014423] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 6000 [ 3.021723] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 3.029798] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600 [ 3.040824] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200 [ 3.048994] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 3.062792] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking [ 3.097033] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -5 [ 3.104511] [drm] failed to retrieve link info, disabling eDP [ 3.110252] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 3.116512] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 [ 3.124343] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 3.131318] [drm:intel_dp_init_connector] Adding DP connector on port C [ 3.137935] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C [ 3.144201] tsc: Refined TSC clocksource calibration: 2194.918 MHz [ 3.144206] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns [ 3.161085] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled [ 3.169427] [drm:intel_modeset_readout_hw_state] [CRTC:30:pipe B] hw state readout: disabled [ 3.177854] [drm:intel_modeset_readout_hw_state] [CRTC:34:pipe C] hw state readout: disabled [ 3.186279] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 3.195482] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 3.204689] [drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 3.213633] [drm:intel_modeset_readout_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 3.223011] [drm:intel_modeset_readout_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 3.232477] [drm:intel_modeset_readout_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 3.241944] [drm:intel_modeset_readout_hw_state] [ENCODER:36:DDI B] hw state readout: enabled, pipe A [ 3.251152] [drm:intel_modeset_readout_hw_state] [ENCODER:41:DDI C] hw state readout: disabled, pipe A [ 3.260442] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP-MST A] hw state readout: disabled, pipe A [ 3.269995] [drm:intel_modeset_readout_hw_state] [ENCODER:44:DP-MST B] hw state readout: disabled, pipe B [ 3.279544] [drm:intel_modeset_readout_hw_state] [ENCODER:45:DP-MST C] hw state readout: disabled, pipe C [ 3.289098] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:HDMI-A-1] hw state readout: enabled [ 3.298042] [drm:intel_modeset_readout_hw_state] [CONNECTOR:42:DP-1] hw state readout: disabled [ 3.306727] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled [ 3.315766] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff880244a43800 for pipe A [ 3.325579] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 3.331056] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 3.337314] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.347472] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.357197] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.367356] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.373352] [drm:intel_dump_pipe_config] requested mode: [ 3.378659] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 3.390206] [drm:intel_dump_pipe_config] adjusted mode: [ 3.395427] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 3.406972] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9 [ 3.418257] [drm:intel_dump_pipe_config] port clock: 154000 [ 3.423820] [drm:intel_dump_pipe_config] pipe src size: 800x600 [ 3.429731] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.437810] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.448316] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x078004b0, enabled [ 3.456827] [drm:intel_dump_pipe_config] ips: 0 [ 3.461350] [drm:intel_dump_pipe_config] double wide: 0 [ 3.466567] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0xb04d062d spll: 0x0 [ 3.474212] [drm:intel_dump_pipe_config] planes on this crtc [ 3.479864] [drm:intel_dump_pipe_config] [PLANE:23:primary A] disabled, scaler_id = 0 [ 3.487681] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 3.495414] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 3.503146] [drm:intel_dump_pipe_config] [CRTC:30:pipe B][setup_hw_state] config ffff880244a44800 for pipe B [ 3.512956] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 3.518435] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.524606] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.534764] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.544490] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.554648] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.560646] [drm:intel_dump_pipe_config] requested mode: [ 3.565950] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.574027] [drm:intel_dump_pipe_config] adjusted mode: [ 3.579247] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.587324] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.596008] [drm:intel_dump_pipe_config] port clock: 0 [ 3.601140] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.606704] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.614782] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.625287] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.633887] [drm:intel_dump_pipe_config] ips: 0 [ 3.638410] [drm:intel_dump_pipe_config] double wide: 0 [ 3.643628] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.650666] [drm:intel_dump_pipe_config] planes on this crtc [ 3.656318] [drm:intel_dump_pipe_config] [PLANE:28:primary B] disabled, scaler_id = 0 [ 3.664136] [drm:intel_dump_pipe_config] [PLANE:29:cursor B] disabled, scaler_id = 0 [ 3.671866] [drm:intel_dump_pipe_config] [PLANE:31:sprite B] disabled, scaler_id = 0 [ 3.679600] [drm:intel_dump_pipe_config] [CRTC:34:pipe C][setup_hw_state] config ffff880244a45800 for pipe C [ 3.689411] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 3.694888] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 3.701060] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.711217] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 3.720943] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 3.731101] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 3.737098] [drm:intel_dump_pipe_config] requested mode: [ 3.742403] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.750482] [drm:intel_dump_pipe_config] adjusted mode: [ 3.755701] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.763777] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 3.772462] [drm:intel_dump_pipe_config] port clock: 0 [ 3.777593] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 3.783159] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 3.791237] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.801741] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 3.810339] [drm:intel_dump_pipe_config] ips: 0 [ 3.814864] [drm:intel_dump_pipe_config] double wide: 0 [ 3.820081] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 3.827118] [drm:intel_dump_pipe_config] planes on this crtc [ 3.832772] [drm:intel_dump_pipe_config] [PLANE:32:primary C] disabled, scaler_id = 0 [ 3.840590] [drm:intel_dump_pipe_config] [PLANE:33:cursor C] disabled, scaler_id = 0 [ 3.848319] [drm:intel_dump_pipe_config] [PLANE:35:sprite C] disabled, scaler_id = 0 [ 3.856053] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling [ 3.864303] [drm:intel_modeset_setup_hw_state] LCPLL 1350 enabled but not in use, disabling [ 3.872641] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling [ 3.880986] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00 [ 3.891837] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000 [ 3.904770] [drm:i915_pages_create_for_stolen] offset=0x0, size=1921024 [ 3.911376] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff880244ac8000 [ 3.919252] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1d5000, fffff000] [ 3.926817] [drm:i915_gem_context_init] LR context support initialized [ 3.933337] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000 [ 3.940808] [drm:i915_pages_create_for_stolen] offset=0x1d5000, size=4096 [ 3.947586] [drm:intel_engine_create_scratch] render ring pipe control offset: 0xffffe000 [ 3.955884] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 3.963360] [drm:i915_pages_create_for_stolen] offset=0x1d6000, size=16384 [ 3.970384] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 3.977868] [drm:i915_pages_create_for_stolen] offset=0x1da000, size=16384 [ 3.984865] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 3.992345] [drm:i915_pages_create_for_stolen] offset=0x1de000, size=16384 [ 3.999343] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 4.006820] [drm:i915_pages_create_for_stolen] offset=0x1e2000, size=16384 [ 4.013818] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 4.021298] [drm:i915_pages_create_for_stolen] offset=0x1e6000, size=16384 [ 4.028176] [drm:gen8_init_common_ring] Execlists enabled for render ring [ 4.034956] [drm:gen8_init_common_ring] Execlists enabled for blitter ring [ 4.041825] [drm:gen8_init_common_ring] Execlists enabled for bsd ring [ 4.048343] [drm:gen8_init_common_ring] Execlists enabled for bsd2 ring [ 4.054946] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring [ 4.062678] [drm:intel_guc_setup] GuC fw status: path (null), fetch NONE, load NONE [ 4.070329] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz [ 4.076917] [drm:intel_fbdev_init_bios] found possible fb from plane A [ 4.083435] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping [ 4.090475] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping [ 4.097512] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb [ 4.103856] [drm:intel_fbdev_init_bios] fb not wide enough for plane A (7680 vs 3200) [ 4.111674] [drm:intel_fbdev_init_bios] BIOS fb not suitable for all pipes, not using [ 4.119777] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-1 [ 4.128507] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI [ 4.138320] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.145563] [drm:asle_set_backlight] bclp = 0x80000002 [ 4.145756] acpi device:10: registered as cooling_device9 [ 4.145841] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 4.145883] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 4.145904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] [ 4.145905] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1] [ 4.156105] clocksource: Switched to clocksource tsc [ 4.157809] brd: module loaded [ 4.158961] loop: module loaded [ 4.159081] Uniform Multi-Platform E-IDE driver [ 4.159110] ide-gd driver 1.18 [ 4.159115] ide-cd driver 5.00 [ 4.159163] ahci 0000:00:1f.2: version 3.0 [ 4.159363] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 4.159365] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 4.159991] scsi host0: ahci [ 4.160087] scsi host1: ahci [ 4.160166] scsi host2: ahci [ 4.160242] scsi host3: ahci [ 4.160296] ata1: FORCE: PHY spd limit set to 3.0Gbps [ 4.160297] ata1: SATA max UDMA/133 abar m2048@0xb2619000 port 0xb2619100 irq 41 [ 4.160298] ata2: FORCE: PHY spd limit set to 3.0Gbps [ 4.160299] ata2: SATA max UDMA/133 abar m2048@0xb2619000 port 0xb2619180 irq 41 [ 4.160300] ata3: DUMMY [ 4.160301] ata4: DUMMY [ 4.160347] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 4.160372] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.160372] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.160385] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 4.160386] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 4.160400] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.160400] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.160414] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 4.160414] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.163003] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.163003] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.163169] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.163172] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] status updated from unknown to connected [ 4.163186] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 4.163190] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes : [ 4.163192] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 4.163193] [drm:drm_mode_debug_printmodeline] Modeline 51:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 4.163195] [drm:drm_mode_debug_printmodeline] Modeline 52:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.163196] [drm:drm_mode_debug_printmodeline] Modeline 53:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 4.163198] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.163199] [drm:drm_mode_debug_printmodeline] Modeline 54:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.163200] [drm:drm_mode_debug_printmodeline] Modeline 55:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 4.163202] [drm:drm_mode_debug_printmodeline] Modeline 56:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.163203] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] [ 4.163204] [drm:intel_dp_detect] [CONNECTOR:42:DP-1] [ 4.163207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] status updated from unknown to disconnected [ 4.163207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] disconnected [ 4.163208] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 4.163209] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 4.163373] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.163374] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.163537] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.163538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 4.163701] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.163701] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.163867] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.163869] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] status updated from unknown to disconnected [ 4.163870] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 4.163872] [drm:drm_setup_crtcs] [ 4.163873] [drm:drm_enable_connectors] connector 37 enabled? yes [ 4.163874] [drm:drm_enable_connectors] connector 42 enabled? no [ 4.163875] [drm:drm_enable_connectors] connector 46 enabled? no [ 4.163877] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1 [ 4.163877] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 0 [ 4.163879] [drm:intel_fb_initial_config] connector HDMI-A-1 on [CRTC:26:pipe A]: 1920x1200 [ 4.163879] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 4.163880] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 4.163881] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 26 (0,0) [ 4.163882] [drm:intelfb_create] no BIOS fb, allocating a new one [ 4.163884] [drm:i915_gem_object_create_stolen] creating stolen object: size=8ca000 [ 4.163886] [drm:i915_pages_create_for_stolen] offset=0x1ea000, size=9216000 [ 4.164728] [drm:intelfb_create] allocated 1920x1200 fb: 0x0020a000 [ 4.188725] pps pps0: new PPS source ptp0 [ 4.188727] igb 0000:01:00.0: added PHC on eth0 [ 4.188728] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.188729] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:4c:c1:01:2e:67 [ 4.188803] igb 0000:01:00.0: eth0: PBA No: 000200-000 [ 4.188805] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.218526] pps pps1: new PPS source ptp1 [ 4.218527] igb 0000:02:00.0: added PHC on eth1 [ 4.218528] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.218530] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) d0:4c:c1:01:2e:68 [ 4.218604] igb 0000:02:00.0: eth1: PBA No: 000200-000 [ 4.218606] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.218653] usbcore: registered new interface driver kaweth [ 4.218654] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.218662] usbcore: registered new interface driver pegasus [ 4.218669] usbcore: registered new interface driver rtl8150 [ 4.218679] usbcore: registered new interface driver asix [ 4.218687] usbcore: registered new interface driver ax88179_178a [ 4.218694] usbcore: registered new interface driver cdc_ether [ 4.218702] usbcore: registered new interface driver dm9601 [ 4.218711] usbcore: registered new interface driver smsc75xx [ 4.218721] usbcore: registered new interface driver smsc95xx [ 4.218728] usbcore: registered new interface driver net1080 [ 4.218736] usbcore: registered new interface driver cdc_subset [ 4.218742] usbcore: registered new interface driver zaurus [ 4.218750] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 4.218758] usbcore: registered new interface driver int51x1 [ 4.218768] usbcore: registered new interface driver cdc_ncm [ 4.218785] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.218785] ehci-pci: EHCI PCI platform driver [ 4.218916] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.218922] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.218936] ehci-pci 0000:00:1d.0: debug port 2 [ 4.222848] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.222859] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb261a000 [ 4.226274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.226450] hub 1-0:1.0: USB hub found [ 4.226455] hub 1-0:1.0: 2 ports detected [ 4.226610] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.226614] ohci-pci: OHCI PCI platform driver [ 4.226625] uhci_hcd: USB Universal Host Controller Interface driver [ 4.226755] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.226760] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.227897] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 4.227902] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.228126] hub 2-0:1.0: USB hub found [ 4.228146] hub 2-0:1.0: 11 ports detected [ 4.232281] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.232284] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.232457] hub 3-0:1.0: USB hub found [ 4.232467] hub 3-0:1.0: 4 ports detected [ 4.234363] usbcore: registered new interface driver usb-storage [ 4.234382] usbcore: registered new interface driver usbserial [ 4.234389] usbcore: registered new interface driver usbserial_generic [ 4.234395] usbserial: USB Serial support registered for generic [ 4.234402] usbcore: registered new interface driver ftdi_sio [ 4.234408] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.234436] usbcore: registered new interface driver pl2303 [ 4.234442] usbserial: USB Serial support registered for pl2303 [ 4.234473] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.234968] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.235005] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.235136] mousedev: PS/2 mouse device common for all mice [ 4.235339] rtc_cmos 00:06: RTC can wake from S4 [ 4.235570] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.235610] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.235622] i2c /dev entries driver [ 4.235902] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.240778] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.240802] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 4.240931] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.240937] md: linear personality registered for level -1 [ 4.240938] md: raid0 personality registered for level 0 [ 4.240939] md: raid1 personality registered for level 1 [ 4.240939] md: raid10 personality registered for level 10 [ 4.240940] md: multipath personality registered for level -4 [ 4.240941] md: faulty personality registered for level -5 [ 4.241029] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.241072] intel_pstate: Intel P-state driver initializing [ 4.244571] sdhci: Secure Digital Host Controller Interface driver [ 4.244573] sdhci: Copyright(c) Pierre Ossman [ 4.262275] mmc0: SDHCI controller on ACPI [INT3436:00] using ADMA [ 4.262302] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.262396] usbcore: registered new interface driver usbhid [ 4.262396] usbhid: USB HID core driver [ 4.262397] intel_telemetry_core Init [ 4.262398] intel_telemetry: version 1.0.0 loaded [ 4.262676] u32 classifier [ 4.262676] Actions configured [ 4.262736] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 4.262859] gre: GRE over IPv4 demultiplexor driver [ 4.262859] ip_gre: GRE over IPv4 tunneling driver [ 4.263063] Initializing XFRM netlink socket [ 4.263196] NET: Registered protocol family 10 [ 4.263504] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.263614] NET: Registered protocol family 17 [ 4.263618] NET: Registered protocol family 15 [ 4.263660] NET: Registered protocol family 36 [ 4.263664] Key type dns_resolver registered [ 4.263886] microcode: sig=0x306d4, pf=0x40, revision=0x24 [ 4.264385] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 4.264389] AVX2 version of gcm_enc/dec engaged. [ 4.264390] AES CTR mode by8 optimization enabled [ 4.264705] registered taskstats version 1 [ 4.265005] Btrfs loaded, crc32c=crc32c-generic [ 4.468859] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 4.468880] ata1: SATA link down (SStatus 0 SControl 320) [ 4.469087] ata2.00: ATA-8: 2.5" SATA SSD 3IE3, S15C14i, max UDMA/133 [ 4.469089] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 4.469336] ata2.00: configured for UDMA/133 [ 4.535288] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.616297] usb 2-4: new low-speed USB device number 2 using xhci_hcd [ 4.653837] hub 1-1:1.0: USB hub found [ 4.653929] hub 1-1:1.0: 8 ports detected [ 4.833400] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/0003:046D:C30E.0001/input/input8 [ 4.888443] hid-generic 0003:046D:C30E.0001: input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:14.0-4/input0 [ 4.905528] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.1/0003:046D:C30E.0002/input/input9 [ 4.961381] hid-generic 0003:046D:C30E.0002: input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:14.0-4/input1 [ 5.354482] [drm:asle_set_backlight] updating opregion backlight 2/255 [ 5.354484] [drm:asle_work] No request on ASLC interrupt 0x00000000 [ 5.354502] fbcon: inteldrmfb (fb0) is primary device [ 5.354581] [drm:connected_sink_compute_bpp] [CONNECTOR:37:HDMI-A-1] checking for sink bpp constrains [ 5.354582] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 [ 5.354584] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output [ 5.354584] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI [ 5.354586] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 5.354587] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff880244050000 for pipe A [ 5.354588] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 5.354589] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 [ 5.354590] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.354591] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 5.354592] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 5.354593] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 5.354593] [drm:intel_dump_pipe_config] requested mode: [ 5.354595] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 5.354596] [drm:intel_dump_pipe_config] adjusted mode: [ 5.354597] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 [ 5.354599] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9 [ 5.354599] [drm:intel_dump_pipe_config] port clock: 154000 [ 5.354600] [drm:intel_dump_pipe_config] pipe src size: 1920x1200 [ 5.354601] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 [ 5.354602] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 5.354603] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 5.354603] [drm:intel_dump_pipe_config] ips: 1 [ 5.354604] [drm:intel_dump_pipe_config] double wide: 0 [ 5.354605] [drm:intel_dump_pipe_config] dpll_hw_state: wrpll: 0xb04d062d spll: 0x0 [ 5.354605] [drm:intel_dump_pipe_config] planes on this crtc [ 5.354608] [drm:intel_dump_pipe_config] [PLANE:23:primary A] enabled [ 5.354609] [drm:intel_dump_pipe_config] FB:48, fb = 800x600 format = XR24 little-endian (0x34325258) [ 5.354609] [drm:intel_dump_pipe_config] scaler:0 src 0x0+800+600 dst 0x0+800+600 [ 5.354610] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0 [ 5.354611] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0 [ 5.354614] [drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500 [ 5.355639] [drm:intel_find_shared_dpll] [CRTC:26:pipe A] allocated WRPLL 1 [ 5.355640] [drm:intel_reference_shared_dpll] using WRPLL 1 for pipe A [ 5.355659] [drm:intel_disable_pipe] disabling pipe A [ 5.359809] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 26 [ 5.359811] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 5.361911] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz [ 5.361913] [drm:verify_encoder_state] [ENCODER:36:DDI B] [ 5.361914] [drm:verify_encoder_state] [ENCODER:41:DDI C] [ 5.361917] [drm:verify_encoder_state] [ENCODER:43:DP-MST A] [ 5.361917] [drm:verify_encoder_state] [ENCODER:44:DP-MST B] [ 5.361918] [drm:verify_encoder_state] [ENCODER:45:DP-MST C] [ 5.361919] [drm:intel_connector_verify_state] [CONNECTOR:42:DP-1] [ 5.361921] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2] [ 5.361922] [drm:verify_single_dpll_state] WRPLL 1 [ 5.361923] [drm:verify_single_dpll_state] WRPLL 2 [ 5.361924] [drm:verify_single_dpll_state] SPLL [ 5.361925] [drm:verify_single_dpll_state] LCPLL 810 [ 5.361926] [drm:verify_single_dpll_state] LCPLL 1350 [ 5.361927] [drm:verify_single_dpll_state] LCPLL 2700 [ 5.361929] [drm:intel_enable_shared_dpll] enable WRPLL 1 (active 1, on? 0) for crtc 26 [ 5.361930] [drm:intel_enable_shared_dpll] enabling WRPLL 1 [ 5.362159] [drm:intel_enable_pipe] enabling pipe A [ 5.362167] [drm:intel_fbc_alloc_cfb] reserved 9216000 bytes of contiguous stolen space for FBC, threshold: 1 [ 5.362168] [drm:intel_fbc_enable] Enabling FBC on pipe A [ 5.378987] [drm:intel_connector_verify_state] [CONNECTOR:37:HDMI-A-1] [ 5.378992] [drm:verify_crtc_state] [CRTC:26:pipe A] [ 5.379001] [drm:verify_single_dpll_state] WRPLL 1 [ 5.379020] [drm:drm_fb_helper_hotplug_event] [ 5.379021] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] [ 5.379023] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1] [ 5.392101] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.392102] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 5.392287] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 5.392302] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 5.392307] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes : [ 5.392310] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 5.392311] [drm:drm_mode_debug_printmodeline] Modeline 51:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 5.392313] [drm:drm_mode_debug_printmodeline] Modeline 52:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 5.392314] [drm:drm_mode_debug_printmodeline] Modeline 53:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [ 5.392316] [drm:drm_mode_debug_printmodeline] Modeline 57:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 5.392317] [drm:drm_mode_debug_printmodeline] Modeline 54:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 5.392319] [drm:drm_mode_debug_printmodeline] Modeline 55:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 5.392320] [drm:drm_mode_debug_printmodeline] Modeline 56:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 5.392322] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] [ 5.392322] [drm:intel_dp_detect] [CONNECTOR:42:DP-1] [ 5.392325] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] disconnected [ 5.392326] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] [ 5.392327] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2] [ 5.392510] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.392510] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.392694] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.392695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 5.392879] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.392880] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.393063] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.393064] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected [ 5.393067] [drm:drm_setup_crtcs] [ 5.393069] [drm:drm_enable_connectors] connector 37 enabled? yes [ 5.393070] [drm:drm_enable_connectors] connector 42 enabled? no [ 5.393070] [drm:drm_enable_connectors] connector 46 enabled? no [ 5.393072] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1 [ 5.393073] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 0 [ 5.393074] [drm:intel_fb_initial_config] connector HDMI-A-1 on [CRTC:26:pipe A]: 1920x1200 [ 5.393075] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 5.393076] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping [ 5.393077] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 26 (0,0) [ 5.417438] Console: switching to colour frame buffer device 240x75 [ 5.959474] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 6.179734] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.185941] console [netcon0] enabled [ 6.189605] netconsole: network logging started [ 6.192565] scsi 1:0:0:0: Direct-Access ATA 2.5" SATA SSD 3I 14i PQ: 0 ANSI: 5 [ 6.202249] rtc_cmos 00:06: setting system clock to 2016-10-04 10:44:07 UTC (1475577847) [ 6.210449] ALSA device list: [ 6.213415] No soundcards found. [ 6.221637] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 6.221640] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 6.221701] sd 1:0:0:0: [sda] Write Protect is off [ 6.221704] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.221721] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.223098] sda: sda1 sda2 sda3 sda4 [ 6.223494] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.261648] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 6.275574] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.283228] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 6.292504] devtmpfs: mounted [ 6.296284] Freeing unused kernel memory: 1380K (ffffffff8214b000 - ffffffff822a4000) [ 6.304105] Write protecting the kernel read-only data: 16384k [ 6.310433] Freeing unused kernel memory: 1868K (ffff88000222d000 - ffff880002400000) [ 6.318592] Freeing unused kernel memory: 132K (ffff8800027df000 - ffff880002800000) [ 6.347475] random: fast init done [ 6.426338] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.444462] systemd[1]: Detected architecture x86-64. [ 6.449803] systemd[1]: Set hostname to . [ 6.566202] systemd[1]: Listening on udev Control Socket. [ 6.571667] systemd[1]: Listening on Journal Socket. [ 6.576703] systemd[1]: Listening on Network Service Netlink Socket. [ 6.583065] systemd[1]: Reached target Remote File Systems. [ 6.588859] systemd[1]: Created slice User and Session Slice. [ 6.594641] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.602294] systemd[1]: Created slice System Slice. [ 6.618547] EXT4-fs (sda2): re-mounted. Opts: (null) [ 6.733290] systemd-journald[176]: Received request to flush runtime journal from PID 1 [ 6.913031] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k SS [ 6.953828] EXT4-fs (sda4): recovery complete [ 6.963613] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 7.512329] [drm:i915_gem_open] [ 7.554455] [drm:i915_gem_open] [ 7.561548] [drm:drm_mode_addfb2] [FB:58] [ 7.569866] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.613007] [drm:drm_mode_addfb2] [FB:58] [ 7.618226] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 7.621858] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.631539] [drm:i915_pages_create_for_stolen] offset=0x1000, size=16384 [ 7.649560] [drm:drm_mode_setcrtc] [CRTC:26:pipe A] [ 7.654445] [drm:drm_mode_setcrtc] [CONNECTOR:37:HDMI-A-1] [ 7.666266] [drm:drm_mode_setcrtc] [CRTC:30:pipe B] [ 7.671161] [drm:drm_mode_setcrtc] [CRTC:34:pipe C] [ 8.093413] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 8.100921] [drm:i915_pages_create_for_stolen] offset=0x5000, size=16384 [ 10.603274] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 10.612873] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.793880] random: crng init done [ 71.066429] [drm:i915_gem_open] [ 71.139618] [drm:i915_gem_context_create_ioctl] HW context 1 created [ 71.146865] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 71.154343] [drm:i915_pages_create_for_stolen] offset=0x9000, size=16384 [ 71.163059] [drm:i915_gem_context_create_ioctl] HW context 2 created [ 71.170065] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000 [ 71.177547] [drm:i915_pages_create_for_stolen] offset=0xd000, size=16384 [ 77.437473] ------------[ cut here ]------------ [ 77.442095] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/i915/intel_uncore.c:802 __unclaimed_reg_debug+0x51/0x60 [ 77.451990] Unclaimed read from register 0x44324 [ 77.456600] Modules linked in: [ 77.459661] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc8-inteltest-01278-g6cdb3f7 #404 [ 77.468170] Hardware name: To be filled by O.E.M. To be filled by O.E.M./SMB-2601, BIOS 5.011 09/21/2016 [ 77.477633] 0000000000000000 ffff88024ec03c98 ffffffff8141058d ffff88024ec03ce8 [ 77.485065] 0000000000000000 ffff88024ec03cd8 ffffffff81080ba1 0000032200000000 [ 77.492496] 0000000000000000 0000000000044324 0000000000000001 ffff880244a90000 [ 77.499928] Call Trace: [ 77.502368] [] dump_stack+0x4f/0x72 [ 77.508122] [] __warn+0xd1/0xf0 [ 77.512906] [] warn_slowpath_fmt+0x4f/0x60 [ 77.518646] [] ? intel_pstate_update_util+0x127/0x460 [ 77.525335] [] __unclaimed_reg_debug+0x51/0x60 [ 77.531421] [] gen6_read32+0x220/0x250 [ 77.536812] [] snb_update_pm_irq+0x96/0xd0 [ 77.542550] [] gen6_disable_pm_irq+0x19/0x40 [ 77.548460] [] gen6_rps_irq_handler+0x67/0xf0 [ 77.554458] [] gen8_gt_irq_handler+0xbf/0x200 [ 77.560454] [] gen8_irq_handler+0x93/0x6b0 [ 77.566189] [] __handle_irq_event_percpu+0x3d/0x1f0 [ 77.572702] [] handle_irq_event_percpu+0x23/0x60 [ 77.578957] [] handle_irq_event+0x39/0x60 [ 77.584608] [] handle_edge_irq+0x90/0x150 [ 77.590258] [] handle_irq+0x1d/0x30 [ 77.595390] [] do_IRQ+0x57/0xf0 [ 77.600169] [] common_interrupt+0x7f/0x7f [ 77.605815] [] ? cpuidle_enter_state+0xca/0x2a0 [ 77.612608] [] cpuidle_enter+0x17/0x20 [ 77.617995] [] cpu_startup_entry+0x21b/0x3d0 [ 77.623906] [] rest_init+0x7f/0x90 [ 77.628954] [] start_kernel+0x3f3/0x400 [ 77.634429] [] x86_64_start_reservations+0x2a/0x2c [ 77.640861] [] x86_64_start_kernel+0xeb/0xee [ 77.646769] ---[ end trace 70d20197785aded6 ]---