I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)" D: [pulseaudio] protocol-native.c: Protocol version: remote 31, local 31 I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: [pulseaudio] protocol-native.c: SHM possible: yes D: [pulseaudio] protocol-native.c: Negotiated SHM: yes D: [pulseaudio] protocol-native.c: Memfd possible: yes D: [pulseaudio] protocol-native.c: Negotiated SHM type: shared posix-shm D: [pulseaudio] memblock.c: Using shared posix-shm memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472 D: [pulseaudio] srbchannel.c: SHM block is 65472 bytes, ringbuffer capacity is 2 * 32712 bytes D: [pulseaudio] protocol-native.c: Enabling srbchannel... D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for vlc D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/vlc.desktop. D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/applications/vlc.desktop' D: [pulseaudio] protocol-native.c: Client enabled srbchannel. D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\"" I: [pulseaudio] sink-input.c: Trying to change sample rate I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING D: [pulseaudio] module-stream-restore.c: Not restoring volume for sink input sink-input-by-media-role:video, because already set. D: [pulseaudio] module-stream-restore.c: Not restoring mute state for sink input sink-input-by-media-role:video, because already set. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming. D: [pulseaudio] resampler.c: Resampler: D: [pulseaudio] resampler.c: rate 48000 -> 44100 (method speex-float-1) D: [pulseaudio] resampler.c: format float32le -> s16le (intermediate float32le) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2) I: [pulseaudio] speex.c: Choosing speex quality setting 1. D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I: [pulseaudio] sink-input.c: Created input 0 "audio stream" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec float32le 2ch 48000Hz and channel map front-left,front-right I: [pulseaudio] sink-input.c: media.role = "video" I: [pulseaudio] sink-input.c: media.name = "audio stream" I: [pulseaudio] sink-input.c: application.name = "VLC media player" I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client" I: [pulseaudio] sink-input.c: native-protocol.version = "31" I: [pulseaudio] sink-input.c: application.id = "org.VideoLAN.VLC" I: [pulseaudio] sink-input.c: application.version = "2.2.4" I: [pulseaudio] sink-input.c: application.icon_name = "vlc" I: [pulseaudio] sink-input.c: application.language = "en_US.utf8" I: [pulseaudio] sink-input.c: application.process.id = "29273" I: [pulseaudio] sink-input.c: application.process.machine_id = "blanked I: [pulseaudio] sink-input.c: application.process.session_id = "blanked" I: [pulseaudio] sink-input.c: application.process.user = "blanked" I: [pulseaudio] sink-input.c: application.process.host = "blanked" I: [pulseaudio] sink-input.c: application.process.binary = "vlc" I: [pulseaudio] sink-input.c: window.x11.display = ":0.0" I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:video" I: [pulseaudio] protocol-native.c: Requested tlength=120.00 ms, minreq=40.00 ms D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq. D: [pulseaudio] protocol-native.c: Requested latency=40.00 ms, Received latency=40.00 ms D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=46080, base=8, prebuf=0, minreq=15360 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=46080, base=8, prebuf=0, minreq=15360 maxrewind=0 I: [pulseaudio] protocol-native.c: Final latency 160.00 ms = 40.00 ms + 2*40.00 ms + 40.00 ms D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 41288 / 63% / -12.04 dB, front-right: 41288 / 63% / -12.04 dB to front-left: 39700 / 61% / -13.06 dB, front-right: 39700 / 61% / -13.06 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Latency set to 40.00ms D: [alsa-sink-ALC892 Analog] alsa-sink.c: hwbuf_unused=58480 D: [alsa-sink-ALC892 Analog] alsa-sink.c: setting avail_min=15503 D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 41288 / 63% / -12.04 dB, front-right: 41288 / 63% / -12.04 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 41350 / 63% / -12.00 dB, front-right: 41350 / 63% / -12.00 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65438 / 100% / -0.04 dB, front-right: 65438 / 100% / -0.04 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 41288 at 43313557263 D: [alsa-sink-ALC892 Analog] ratelimit.c: 334 events suppressed D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 26143 usec D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested to rewind 65536 bytes. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Limited to 5756 bytes. D: [alsa-sink-ALC892 Analog] alsa-sink.c: before: 1439 D: [alsa-sink-ALC892 Analog] alsa-sink.c: after: 1439 D: [alsa-sink-ALC892 Analog] alsa-sink.c: Rewound 5756 bytes. D: [alsa-sink-ALC892 Analog] sink.c: Processing rewind... D: [alsa-sink-ALC892 Analog] sink.c: latency = 1359 D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 41288 at 43313524648 was written 6642 usec late D: [alsa-sink-ALC892 Analog] sink-input.c: Have to rewind 5756 bytes on render memblockq. D: [alsa-sink-ALC892 Analog] source.c: Processing rewind... D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set. D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\"" format.rate = "25" format.channels = "1" format.channel_map = "\"mono\"" I: [pulseaudio] source-output.c: Trying to change sample rate I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming. D: [pulseaudio] resampler.c: Resampler: D: [pulseaudio] resampler.c: rate 44100 -> 25 (method peaks) D: [pulseaudio] resampler.c: format s16le -> float32le (intermediate s16le) D: [pulseaudio] resampler.c: channels 2 -> 1 (resampling 1) D: [pulseaudio] resampler.c: Channel matrix: D: [pulseaudio] resampler.c: I00 I01 D: [pulseaudio] resampler.c: +------------ D: [pulseaudio] resampler.c: O00 | 0.500 0.500 I: [pulseaudio] remap.c: Using stereo to mono remapping D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I: [pulseaudio] source-output.c: Created output 1 "Peak detect" on alsa_output.pci-0000_00_14.2.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono I: [pulseaudio] source-output.c: media.name = "Peak detect" I: [pulseaudio] source-output.c: application.name = "PulseAudio Volume Control" I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client" I: [pulseaudio] source-output.c: native-protocol.version = "31" I: [pulseaudio] source-output.c: application.id = "org.PulseAudio.pavucontrol" I: [pulseaudio] source-output.c: application.icon_name = "audio-card" I: [pulseaudio] source-output.c: application.version = "3.0" I: [pulseaudio] source-output.c: application.process.id = "26924" I: [pulseaudio] source-output.c: application.process.user = "blanked I: [pulseaudio] source-output.c: application.process.host = "blanked I: [pulseaudio] source-output.c: application.process.binary = "pavucontrol" I: [pulseaudio] source-output.c: application.language = "en_US.utf8" I: [pulseaudio] source-output.c: window.x11.display = ":0.0" I: [pulseaudio] source-output.c: application.process.machine_id = "f3bbba36f31e7b5c9df873a957af5dbe" I: [pulseaudio] source-output.c: application.process.session_id = "1" I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol" D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0 I: [pulseaudio] protocol-native.c: Final latency 80.00 ms = 40.00 ms + 40.00 ms D: [alsa-sink-ALC892 Analog] alsa-sink.c: Latency set to 40.00ms D: [alsa-sink-ALC892 Analog] alsa-sink.c: hwbuf_unused=58480 D: [alsa-sink-ALC892 Analog] alsa-sink.c: setting avail_min=15503 D: [alsa-sink-ALC892 Analog] alsa-sink.c: Latency set to 40.00ms D: [alsa-sink-ALC892 Analog] alsa-sink.c: hwbuf_unused=58480 D: [alsa-sink-ALC892 Analog] alsa-sink.c: setting avail_min=15503 D: [alsa-sink-ALC892 Analog] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink-ALC892 Analog] protocol-native.c: Requesting rewind due to end of underrun. I: [pulseaudio] sink.c: Cannot update rate, monitor source is RUNNING D: [alsa-sink-ALC892 Analog] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink-ALC892 Analog] sink-input.c: Requesting rewind due to uncorking D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested to rewind 65536 bytes. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Limited to 6748 bytes. D: [alsa-sink-ALC892 Analog] alsa-sink.c: before: 1687 D: [alsa-sink-ALC892 Analog] alsa-sink.c: after: 1687 D: [alsa-sink-ALC892 Analog] alsa-sink.c: Rewound 6748 bytes. D: [alsa-sink-ALC892 Analog] sink.c: Processing rewind... D: [alsa-sink-ALC892 Analog] sink.c: latency = 1323 D: [alsa-sink-ALC892 Analog] source.c: Processing rewind... D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 41288 / 63% / -12.04 dB, front-right: 41288 / 63% / -12.04 dB to front-left: 38666 / 59% / -13.75 dB, front-right: 38666 / 59% / -13.75 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 39700 / 61% / -13.06 dB, front-right: 39700 / 61% / -13.06 dB to front-left: 37179 / 57% / -14.77 dB, front-right: 37179 / 57% / -14.77 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 38666 / 59% / -13.75 dB, front-right: 38666 / 59% / -13.75 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 38888 / 59% / -13.60 dB, front-right: 38888 / 59% / -13.60 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65162 / 99% / -0.15 dB, front-right: 65162 / 99% / -0.15 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 38666 at 43316072845 D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 26152 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 26122 usec I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25830 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25801 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25771 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25746 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25663 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25635 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25606 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 25579 usec D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 38666 at 43316072845 was written 35 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 38666 / 59% / -13.75 dB, front-right: 38666 / 59% / -13.75 dB to front-left: 36045 / 55% / -15.58 dB, front-right: 36045 / 55% / -15.58 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 37179 / 57% / -14.77 dB, front-right: 37179 / 57% / -14.77 dB to front-left: 34659 / 53% / -16.60 dB, front-right: 34659 / 53% / -16.60 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 36045 / 55% / -15.58 dB, front-right: 36045 / 55% / -15.58 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 36293 / 55% / -15.40 dB, front-right: 36293 / 55% / -15.40 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65088 / 99% / -0.18 dB, front-right: 65088 / 99% / -0.18 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 36045 at 43316372576 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 36045 at 43316372576 was written 36 usec late D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 36045 / 55% / -15.58 dB, front-right: 36045 / 55% / -15.58 dB (request) != front-left: 35466 / 54% / -16.00 dB, front-right: 35466 / 54% / -16.00 dB D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 36045 / 55% / -15.58 dB, front-right: 36045 / 55% / -15.58 dB to front-left: 33423 / 51% / -17.55 dB, front-right: 33423 / 51% / -17.55 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 34659 / 53% / -16.60 dB, front-right: 34659 / 53% / -16.60 dB to front-left: 32138 / 49% / -18.57 dB, front-right: 32138 / 49% / -18.57 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 33423 / 51% / -17.55 dB, front-right: 33423 / 51% / -17.55 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 33611 / 51% / -17.40 dB, front-right: 33611 / 51% / -17.40 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65169 / 99% / -0.15 dB, front-right: 65169 / 99% / -0.15 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 33423 at 43316872299 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 33423 at 43316872299 was written 39 usec late D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 33423 / 51% / -17.55 dB, front-right: 33423 / 51% / -17.55 dB (request) != front-left: 32846 / 50% / -18.00 dB, front-right: 32846 / 50% / -18.00 dB D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 33423 / 51% / -17.55 dB, front-right: 33423 / 51% / -17.55 dB to front-left: 30802 / 47% / -19.67 dB, front-right: 30802 / 47% / -19.67 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 32138 / 49% / -18.57 dB, front-right: 32138 / 49% / -18.57 dB to front-left: 29617 / 45% / -20.70 dB, front-right: 29617 / 45% / -20.70 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 30802 / 47% / -19.67 dB, front-right: 30802 / 47% / -19.67 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 30889 / 47% / -19.60 dB, front-right: 30889 / 47% / -19.60 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65351 / 100% / -0.07 dB, front-right: 65351 / 100% / -0.07 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 30802 at 43317112797 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 30802 at 43317112797 was written 85 usec late D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 30802 / 47% / -19.67 dB, front-right: 30802 / 47% / -19.67 dB (request) != front-left: 30419 / 46% / -20.00 dB, front-right: 30419 / 46% / -20.00 dB D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 30802 / 47% / -19.67 dB, front-right: 30802 / 47% / -19.67 dB to front-left: 28180 / 43% / -21.99 dB, front-right: 28180 / 43% / -21.99 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 29617 / 45% / -20.70 dB, front-right: 29617 / 45% / -20.70 dB to front-left: 27096 / 41% / -23.01 dB, front-right: 27096 / 41% / -23.01 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 28180 / 43% / -21.99 dB, front-right: 28180 / 43% / -21.99 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 28389 / 43% / -21.80 dB, front-right: 28389 / 43% / -21.80 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65054 / 99% / -0.19 dB, front-right: 65054 / 99% / -0.19 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 28180 at 43317272865 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 28180 at 43317272865 was written 27 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 28180 / 43% / -21.99 dB, front-right: 28180 / 43% / -21.99 dB to front-left: 25559 / 39% / -24.54 dB, front-right: 25559 / 39% / -24.54 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 27096 / 41% / -23.01 dB, front-right: 27096 / 41% / -23.01 dB to front-left: 24576 / 38% / -25.56 dB, front-right: 24576 / 38% / -25.56 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 25559 / 39% / -24.54 dB, front-right: 25559 / 39% / -24.54 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 25693 / 39% / -24.40 dB, front-right: 25693 / 39% / -24.40 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65194 / 99% / -0.14 dB, front-right: 65194 / 99% / -0.14 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 25559 at 43317513864 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 25559 at 43317513864 was written 24 usec late D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 25559 / 39% / -24.54 dB, front-right: 25559 / 39% / -24.54 dB (request) != front-left: 25108 / 38% / -25.00 dB, front-right: 25108 / 38% / -25.00 dB D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 25559 / 39% / -24.54 dB, front-right: 25559 / 39% / -24.54 dB to front-left: 22938 / 35% / -27.36 dB, front-right: 22938 / 35% / -27.36 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 24576 / 38% / -25.56 dB, front-right: 24576 / 38% / -25.56 dB to front-left: 22056 / 34% / -28.38 dB, front-right: 22056 / 34% / -28.38 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 22938 / 35% / -27.36 dB, front-right: 22938 / 35% / -27.36 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 23075 / 35% / -27.20 dB, front-right: 23075 / 35% / -27.20 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65147 / 99% / -0.16 dB, front-right: 65147 / 99% / -0.16 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 22938 at 43317932438 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 22938 at 43317932438 was written 82 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 22938 / 35% / -27.36 dB, front-right: 22938 / 35% / -27.36 dB to front-left: 20316 / 31% / -30.52 dB, front-right: 20316 / 31% / -30.52 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 22056 / 34% / -28.38 dB, front-right: 22056 / 34% / -28.38 dB to front-left: 19535 / 30% / -31.54 dB, front-right: 19535 / 30% / -31.54 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 20316 / 31% / -30.52 dB, front-right: 20316 / 31% / -30.52 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 20408 / 31% / -30.40 dB, front-right: 20408 / 31% / -30.40 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65241 / 100% / -0.12 dB, front-right: 65241 / 100% / -0.12 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 20316 at 43318198443 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 20316 at 43318198443 was written 24 usec late D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 20316 / 31% / -30.52 dB, front-right: 20316 / 31% / -30.52 dB (request) != front-left: 19944 / 30% / -31.00 dB, front-right: 19944 / 30% / -31.00 dB D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 20316 / 31% / -30.52 dB, front-right: 20316 / 31% / -30.52 dB to front-left: 17695 / 27% / -34.12 dB, front-right: 17695 / 27% / -34.12 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 19535 / 30% / -31.54 dB, front-right: 19535 / 30% / -31.54 dB to front-left: 17015 / 26% / -35.14 dB, front-right: 17015 / 26% / -35.14 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 17695 / 27% / -34.12 dB, front-right: 17695 / 27% / -34.12 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 17775 / 27% / -34.00 dB, front-right: 17775 / 27% / -34.00 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65241 / 100% / -0.12 dB, front-right: 65241 / 100% / -0.12 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 17695 at 43318361709 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 17695 at 43318361709 was written 45 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 17695 / 27% / -34.12 dB, front-right: 17695 / 27% / -34.12 dB to front-left: 15073 / 23% / -38.30 dB, front-right: 15073 / 23% / -38.30 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 17015 / 26% / -35.14 dB, front-right: 17015 / 26% / -35.14 dB to front-left: 14493 / 22% / -39.32 dB, front-right: 14493 / 22% / -39.32 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 15073 / 23% / -38.30 dB, front-right: 15073 / 23% / -38.30 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 15129 / 23% / -38.20 dB, front-right: 15129 / 23% / -38.20 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65293 / 100% / -0.10 dB, front-right: 65293 / 100% / -0.10 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 15073 at 43318712369 D: [alsa-sink-ALC892 Analog] ratelimit.c: 230 events suppressed D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 31430 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 31376 usec I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 31119 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 31086 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 31055 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 31016 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 30816 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 30782 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 30751 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 30723 usec D: [alsa-sink-ALC892 Analog] sink.c: Next volume change in 22805 usec D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 15073 at 43318712369 was written 26 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 15073 / 23% / -38.30 dB, front-right: 15073 / 23% / -38.30 dB to front-left: 12452 / 19% / -43.27 dB, front-right: 12452 / 19% / -43.27 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 14493 / 22% / -39.32 dB, front-right: 14493 / 22% / -39.32 dB to front-left: 11973 / 18% / -44.30 dB, front-right: 11973 / 18% / -44.30 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 12452 / 19% / -43.27 dB, front-right: 12452 / 19% / -43.27 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 12488 / 19% / -43.20 dB, front-right: 12488 / 19% / -43.20 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65347 / 100% / -0.08 dB, front-right: 65347 / 100% / -0.08 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 12452 at 43319081647 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 12452 at 43319081647 was written 88 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 12452 / 19% / -43.27 dB, front-right: 12452 / 19% / -43.27 dB to front-left: 9830 / 15% / -49.44 dB, front-right: 9830 / 15% / -49.44 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 11973 / 18% / -44.30 dB, front-right: 11973 / 18% / -44.30 dB to front-left: 9452 / 14% / -50.46 dB, front-right: 9452 / 14% / -50.46 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 9830 / 15% / -49.44 dB, front-right: 9830 / 15% / -49.44 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 9844 / 15% / -49.40 dB, front-right: 9844 / 15% / -49.40 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65443 / 100% / -0.04 dB, front-right: 65443 / 100% / -0.04 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 9830 at 43319388357 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 9830 at 43319388357 was written 31 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 9830 / 15% / -49.44 dB, front-right: 9830 / 15% / -49.44 dB to front-left: 7209 / 11% / -57.52 dB, front-right: 7209 / 11% / -57.52 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 9452 / 14% / -50.46 dB, front-right: 9452 / 14% / -50.46 dB to front-left: 6932 / 11% / -58.54 dB, front-right: 6932 / 11% / -58.54 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 7209 / 11% / -57.52 dB, front-right: 7209 / 11% / -57.52 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 7241 / 11% / -57.40 dB, front-right: 7241 / 11% / -57.40 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65246 / 100% / -0.12 dB, front-right: 65246 / 100% / -0.12 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 7209 at 43319693387 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 7209 at 43319693387 was written 34 usec late D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 7209 / 11% / -57.52 dB, front-right: 7209 / 11% / -57.52 dB (request) != front-left: 7076 / 11% / -58.00 dB, front-right: 7076 / 11% / -58.00 dB D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 7209 / 11% / -57.52 dB, front-right: 7209 / 11% / -57.52 dB to front-left: 4588 / 7% / -69.29 dB, front-right: 4588 / 7% / -69.29 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 6932 / 11% / -58.54 dB, front-right: 6932 / 11% / -58.54 dB to front-left: 4412 / 7% / -70.31 dB, front-right: 4412 / 7% / -70.31 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 4588 / 7% / -69.29 dB, front-right: 4588 / 7% / -69.29 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 4605 / 7% / -69.20 dB, front-right: 4605 / 7% / -69.20 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65294 / 100% / -0.10 dB, front-right: 65294 / 100% / -0.10 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 4588 at 43320153163 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 4588 at 43320153163 was written 29 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 4588 / 7% / -69.29 dB, front-right: 4588 / 7% / -69.29 dB to front-left: 1966 / 3% / -91.37 dB, front-right: 1966 / 3% / -91.37 dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 4412 / 7% / -70.31 dB, front-right: 4412 / 7% / -70.31 dB to front-left: 1890 / 3% / -92.40 dB, front-right: 1890 / 3% / -92.40 dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 1966 / 3% / -91.37 dB, front-right: 1966 / 3% / -91.37 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 1979 / 3% / -91.20 dB, front-right: 1979 / 3% / -91.20 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 65105 / 99% / -0.17 dB, front-right: 65105 / 99% / -0.17 dB (accurate-enough=yes) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 1966 at 43320521334 I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 1966 at 43320521334 was written 30 usec late D: [pulseaudio] protocol-native.c: Client vlc changes mute of sink input audio stream. D: [pulseaudio] protocol-native.c: Client vlc changes volume of sink input audio stream. D: [pulseaudio] sink-input.c: The volume of sink input 0 changed from front-left: 1966 / 3% / -91.37 dB, front-right: 1966 / 3% / -91.37 dB to front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf dB. D: [pulseaudio] sink-input.c: Sink input 0 reference ratio changed from front-left: 1890 / 3% / -92.40 dB, front-right: 1890 / 3% / -92.40 dB to front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf dB. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware volume: front-left: 68 / 0% / -179.04 dB, front-right: 68 / 0% / -179.04 dB D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated software volume: front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf dB (accurate-enough=no) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 0 at 43320953356 D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested to rewind 65536 bytes. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Limited to 6676 bytes. D: [alsa-sink-ALC892 Analog] alsa-sink.c: before: 1669 D: [alsa-sink-ALC892 Analog] alsa-sink.c: after: 1669 D: [alsa-sink-ALC892 Analog] alsa-sink.c: Rewound 6676 bytes. D: [alsa-sink-ALC892 Analog] sink.c: Processing rewind... D: [alsa-sink-ALC892 Analog] sink.c: latency = 1362 D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 0 at 43320915536 was written 6638 usec late I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:video. D: [alsa-sink-ALC892 Analog] alsa-sink.c: Written HW volume did not match with the request: front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf dB (request) != front-left: 68 / 0% / -179.04 dB, front-right: 68 / 0% / -179.04 dB D: [alsa-sink-ALC892 Analog] sink-input.c: Have to rewind 6676 bytes on render memblockq. D: [alsa-sink-ALC892 Analog] sink-input.c: Have to rewind 14536 bytes on implementor. D: [alsa-sink-ALC892 Analog] source.c: Processing rewind... Segmentation fault