dmesg output: [ 0.000000] Linux version 4.8.12-3-ARCH (builduser@bp) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Thu Dec 8 16:10:23 CET 2016 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=65ac3283-cb27-45a4-ba44-9483a0114ed0 rw quiet cryptdevice=/dev/lvm/lvroot:cryptoroot root=/dev/mapper/cryptoroot [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bbe92fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bbe93000-0x00000000bbec1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbec2000-0x00000000bdaccfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdacd000-0x00000000bdacdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bdace000-0x00000000bdb17fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bdb18000-0x00000000c2cc1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c2cc2000-0x00000000c43d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c43d4000-0x00000000c43e1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c43e2000-0x00000000c45defff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c45df000-0x00000000c4d1bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c4d1c000-0x00000000c52fefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c52ff000-0x00000000c52fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c5300000-0x00000000c7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000235ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: System manufacturer System Product Name/B150M-A, BIOS 2001 09/23/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x236000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00C8000000 mask 7FF8000000 uncachable [ 0.000000] 3 base 00C6000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00C5800000 mask 7FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xc5300 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcbf0-0x000fcbff] mapped at [ffff8800000fcbf0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x01d4d000, 0x01d4dfff] PGTABLE [ 0.000000] BRK [0x01d4e000, 0x01d4efff] PGTABLE [ 0.000000] BRK [0x01d4f000, 0x01d4ffff] PGTABLE [ 0.000000] BRK [0x01d50000, 0x01d50fff] PGTABLE [ 0.000000] BRK [0x01d51000, 0x01d51fff] PGTABLE [ 0.000000] BRK [0x01d52000, 0x01d52fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x367d2000-0x373e0fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BBE930A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BBEB65A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BBE931F8 0233A6 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000C4D1BF80 000040 [ 0.000000] ACPI: APIC 0x00000000BBEB66B0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000BBEB6770 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000BBEB67B8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000BBEB6858 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BBEB6898 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x00000000BBEB68D0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: LPIT 0x00000000BBEB6C40 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000BBEB6CD8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BBEB6F20 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BBEB9AD0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BBEBA6B8 0004A3 (v02 INTEL zpodd 00001000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x00000000BBEBAB60 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x00000000BBEBAB98 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x00000000BBEBABF0 000705 (v02 INTEL xh_rvp08 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000BBEBB2F8 005359 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000BBEC0658 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000BBEC06A0 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000BBEC1570 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000235ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x235ff5000-0x235ff9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000235ffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bbe92fff] [ 0.000000] node 0: [mem 0x00000000bbec2000-0x00000000bdaccfff] [ 0.000000] node 0: [mem 0x00000000bdb18000-0x00000000c2cc1fff] [ 0.000000] node 0: [mem 0x00000000c43e2000-0x00000000c45defff] [ 0.000000] node 0: [mem 0x00000000c52ff000-0x00000000c52fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000235ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000235ffffff] [ 0.000000] On node 0 totalpages: 2067937 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12410 pages used for memmap [ 0.000000] DMA32 zone: 794182 pages, LIFO batch:31 [ 0.000000] Normal zone: 19840 pages used for memmap [ 0.000000] Normal zone: 1269760 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000c6000000-0x00000000c7ffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbe93000-0xbbec1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdacd000-0xbdacdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbdace000-0xbdb17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc2cc2000-0xc43d3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc43d4000-0xc43e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc45df000-0xc4d1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4d1c000-0xc52fefff] [ 0.000000] PM: Registered nosave memory: [mem 0xc5300000-0xc7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xc8000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff880235c00000 s103128 r8192 d32040 u262144 [ 0.000000] pcpu-alloc: s103128 r8192 d32040 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2035602 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=65ac3283-cb27-45a4-ba44-9483a0114ed0 rw quiet cryptdevice=/dev/lvm/lvroot:cryptoroot root=/dev/mapper/cryptoroot [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8047132K/8271748K available (6131K kernel code, 1051K rwdata, 1912K rodata, 1256K init, 1036K bss, 224616K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:2048 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 3400.000 MHz processor [ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 6818.00 BogoMIPS (lpj=11360000) [ 0.000017] pid_max: default: 32768 minimum: 301 [ 0.000024] ACPI: Core revision 20160422 [ 0.022238] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210) [ 0.022241] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227) [ 0.022277] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160422/tbxfload-227) [ 0.029344] ACPI Error: 1 table load failures, 8 successful (20160422/tbxfload-247) [ 0.029362] Security Framework initialized [ 0.029362] Yama: becoming mindful. [ 0.029619] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.030674] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.031112] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.031117] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.031268] CPU: Physical Processor ID: 0 [ 0.031268] CPU: Processor Core ID: 0 [ 0.031272] mce: CPU supports 10 MCE banks [ 0.031279] CPU0: Thermal monitoring enabled (TM1) [ 0.031292] process: using mwait in idle threads [ 0.031294] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.031294] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.031542] Freeing SMP alternatives memory: 24K (ffffffff81c42000 - ffffffff81c48000) [ 0.032343] ftrace: allocating 24335 entries in 96 pages [ 0.039752] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.039753] smpboot: Max logical packages: 2 [ 0.041009] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.044207] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.077214] TSC deadline timer enabled [ 0.077219] smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.077222] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.077241] ... version: 4 [ 0.077241] ... bit width: 48 [ 0.077242] ... generic registers: 4 [ 0.077242] ... value mask: 0000ffffffffffff [ 0.077242] ... max period: 0000ffffffffffff [ 0.077243] ... fixed-purpose events: 3 [ 0.077243] ... event mask: 000000070000000f [ 0.100722] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.117295] x86: Booting SMP configuration: [ 0.117298] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.782884] x86: Booted up 1 node, 8 CPUs [ 0.782886] smpboot: Total of 8 processors activated (54558.32 BogoMIPS) [ 0.789251] devtmpfs: initialized [ 0.789287] x86/mm: Memory block size: 128MB [ 0.790595] PM: Registering ACPI NVS region [mem 0xbdacd000-0xbdacdfff] (4096 bytes) [ 0.790596] PM: Registering ACPI NVS region [mem 0xc45df000-0xc4d1bfff] (7589888 bytes) [ 0.790687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.790716] pinctrl core: initialized pinctrl subsystem [ 0.790819] RTC time: 13:16:42, date: 12/15/16 [ 0.790879] NET: Registered protocol family 16 [ 0.805693] cpuidle: using governor ladder [ 0.825712] cpuidle: using governor menu [ 0.825787] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.825788] ACPI: bus type PCI registered [ 0.825788] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.825828] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.825829] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.825834] PCI: Using configuration type 1 for base access [ 0.842502] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.842502] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.842624] ACPI: Added _OSI(Module Device) [ 0.842625] ACPI: Added _OSI(Processor Device) [ 0.842625] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.842626] ACPI: Added _OSI(Processor Aggregator Device) [ 0.843450] ACPI: Executed 25 blocks of module-level executable AML code [ 0.850345] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.852890] ACPI: Dynamic OEM Table Load: [ 0.852894] ACPI: SSDT 0xFFFF88022BFB2800 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.853516] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.854655] ACPI: Dynamic OEM Table Load: [ 0.854658] ACPI: SSDT 0xFFFF88022BF62800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.855728] ACPI: Dynamic OEM Table Load: [ 0.855733] ACPI: SSDT 0xFFFF88022BFB5000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.856539] ACPI: Dynamic OEM Table Load: [ 0.856541] ACPI: SSDT 0xFFFF88022BF68E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.860967] ACPI: Interpreter enabled [ 0.860994] ACPI: (supports S0 S3 S4 S5) [ 0.860995] ACPI: Using IOAPIC for interrupt routing [ 0.861020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.862597] ACPI: Power Resource [PG00] (on) [ 0.862883] ACPI: Power Resource [PG01] (on) [ 0.863140] ACPI: Power Resource [PG02] (on) [ 0.865147] ACPI: Power Resource [WRST] (on) [ 0.865421] ACPI: Power Resource [WRST] (on) [ 0.865691] ACPI: Power Resource [WRST] (on) [ 0.865964] ACPI: Power Resource [WRST] (on) [ 0.866230] ACPI: Power Resource [WRST] (on) [ 0.866499] ACPI: Power Resource [WRST] (on) [ 0.866765] ACPI: Power Resource [WRST] (on) [ 0.867032] ACPI: Power Resource [WRST] (on) [ 0.867298] ACPI: Power Resource [WRST] (on) [ 0.867572] ACPI: Power Resource [WRST] (on) [ 0.867857] ACPI: Power Resource [WRST] (on) [ 0.868126] ACPI: Power Resource [WRST] (on) [ 0.868399] ACPI: Power Resource [WRST] (on) [ 0.868667] ACPI: Power Resource [WRST] (on) [ 0.868935] ACPI: Power Resource [WRST] (on) [ 0.869206] ACPI: Power Resource [WRST] (on) [ 0.869472] ACPI: Power Resource [WRST] (on) [ 0.869738] ACPI: Power Resource [WRST] (on) [ 0.870006] ACPI: Power Resource [WRST] (on) [ 0.870273] ACPI: Power Resource [WRST] (on) [ 0.875512] ACPI: Power Resource [FN00] (off) [ 0.875568] ACPI: Power Resource [FN01] (off) [ 0.875623] ACPI: Power Resource [FN02] (off) [ 0.875678] ACPI: Power Resource [FN03] (off) [ 0.875732] ACPI: Power Resource [FN04] (off) [ 0.876588] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.876592] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.876615] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.877066] PCI host bridge to bus 0000:00 [ 0.877067] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.877068] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.877068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.877069] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window] [ 0.877070] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.877071] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.877075] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 [ 0.877302] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 [ 0.877308] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.877312] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.877314] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.877456] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.877470] pci 0000:00:14.0: reg 0x10: [mem 0xf7110000-0xf711ffff 64bit] [ 0.877525] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.877635] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.877683] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.877700] pci 0000:00:16.0: reg 0x10: [mem 0xf712d000-0xf712dfff 64bit] [ 0.877757] pci 0000:00:16.0: PME# supported from D3hot [ 0.877864] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.877875] pci 0000:00:17.0: reg 0x10: [mem 0xf7128000-0xf7129fff] [ 0.877880] pci 0000:00:17.0: reg 0x14: [mem 0xf712c000-0xf712c0ff] [ 0.877886] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.877892] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.877897] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.877903] pci 0000:00:17.0: reg 0x24: [mem 0xf712b000-0xf712b7ff] [ 0.877935] pci 0000:00:17.0: PME# supported from D3hot [ 0.878033] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400 [ 0.878084] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.878162] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.878207] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 [ 0.878251] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.878325] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.878353] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400 [ 0.878398] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold [ 0.878476] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.878514] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100 [ 0.878686] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.878696] pci 0000:00:1f.2: reg 0x10: [mem 0xf7124000-0xf7127fff] [ 0.878821] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.878836] pci 0000:00:1f.3: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit] [ 0.878857] pci 0000:00:1f.3: reg 0x20: [mem 0xf7100000-0xf710ffff 64bit] [ 0.878891] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.879000] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.879029] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.879075] pci 0000:00:1f.4: reg 0x10: [mem 0xf712a000-0xf712a0ff 64bit] [ 0.879144] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.879348] acpiphp: Slot [1] registered [ 0.879353] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.879395] acpiphp: Slot [1-1] registered [ 0.879398] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.879448] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.879463] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.879486] pci 0000:03:00.0: reg 0x18: [mem 0xf7004000-0xf7004fff 64bit] [ 0.879500] pci 0000:03:00.0: reg 0x20: [mem 0xf7000000-0xf7003fff 64bit] [ 0.879577] pci 0000:03:00.0: supports D1 D2 [ 0.879578] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.879617] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.889197] pci 0000:00:1d.3: PCI bridge to [bus 03] [ 0.889202] pci 0000:00:1d.3: bridge window [io 0xe000-0xefff] [ 0.889208] pci 0000:00:1d.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.890844] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.890878] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.890911] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.890945] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.890978] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.891011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.891044] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.891076] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.891377] ACPI: Enabled 5 GPEs in block 00 to 7F [ 0.891433] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.891434] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.891435] vgaarb: loaded [ 0.891435] vgaarb: bridge control possible 0000:00:02.0 [ 0.891471] PCI: Using ACPI for IRQ routing [ 0.898143] PCI: pci_cache_line_size set to 64 bytes [ 0.898178] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] [ 0.898178] e820: reserve RAM buffer [mem 0xbbe93000-0xbbffffff] [ 0.898179] e820: reserve RAM buffer [mem 0xbdacd000-0xbfffffff] [ 0.898179] e820: reserve RAM buffer [mem 0xc2cc2000-0xc3ffffff] [ 0.898180] e820: reserve RAM buffer [mem 0xc45df000-0xc7ffffff] [ 0.898180] e820: reserve RAM buffer [mem 0xc5300000-0xc7ffffff] [ 0.898181] e820: reserve RAM buffer [mem 0x236000000-0x237ffffff] [ 0.898232] NetLabel: Initializing [ 0.898232] NetLabel: domain hash size = 128 [ 0.898233] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.898240] NetLabel: unlabeled traffic allowed by default [ 0.898302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.898305] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.900343] clocksource: Switched to clocksource hpet [ 0.903948] VFS: Disk quotas dquot_6.6.0 [ 0.903967] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.904005] pnp: PnP ACPI init [ 0.904144] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.904145] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.904462] pnp 00:01: [dma 0 disabled] [ 0.904554] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.904789] pnp 00:02: [dma 0 disabled] [ 0.904814] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.904960] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.904960] system 00:03: [io 0xffff] has been reserved [ 0.904961] system 00:03: [io 0xffff] has been reserved [ 0.904962] system 00:03: [io 0xffff] has been reserved [ 0.904962] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.904963] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.904964] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.905025] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.905026] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.905037] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.905060] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.905061] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.905224] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.905225] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.905226] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.905226] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.905227] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.905228] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.905229] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.905229] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.905230] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.905231] system 00:07: [mem 0xf7fc0000-0xf7fdffff] has been reserved [ 0.905232] system 00:07: [mem 0xc5400000-0xc7fffffe] has been reserved [ 0.905233] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.905256] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.905257] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.905258] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.905258] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.905259] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.905260] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.905261] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.905262] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.905467] system 00:09: [io 0xfe00-0xfefe] has been reserved [ 0.905468] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.906222] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.906222] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.906223] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.906224] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.906799] pnp: PnP ACPI: found 11 devices [ 0.914718] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.914727] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.914729] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.914729] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.914734] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.914734] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.914735] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.914742] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.914743] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.914744] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.914745] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.914745] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.914746] pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.914747] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.914748] pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.914748] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.914749] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.914750] pci 0000:00:1d.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.914750] pci 0000:00:1d.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.914752] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc8000000-0xc81fffff] [ 0.914756] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8200000-0xc83fffff 64bit pref] [ 0.914757] pci 0000:00:1d.0: BAR 14: assigned [mem 0xc8400000-0xc85fffff] [ 0.914759] pci 0000:00:1d.0: BAR 15: assigned [mem 0xc8600000-0xc87fffff 64bit pref] [ 0.914760] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.914761] pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.914762] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.914765] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.914768] pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xc81fffff] [ 0.914770] pci 0000:00:1c.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref] [ 0.914773] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.914774] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.914776] pci 0000:00:1d.0: bridge window [mem 0xc8400000-0xc85fffff] [ 0.914778] pci 0000:00:1d.0: bridge window [mem 0xc8600000-0xc87fffff 64bit pref] [ 0.914781] pci 0000:00:1d.3: PCI bridge to [bus 03] [ 0.914782] pci 0000:00:1d.3: bridge window [io 0xe000-0xefff] [ 0.914785] pci 0000:00:1d.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.914789] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.914790] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.914791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.914791] pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window] [ 0.914792] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.914793] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.914793] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xc81fffff] [ 0.914794] pci_bus 0000:01: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref] [ 0.914794] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.914795] pci_bus 0000:02: resource 1 [mem 0xc8400000-0xc85fffff] [ 0.914796] pci_bus 0000:02: resource 2 [mem 0xc8600000-0xc87fffff 64bit pref] [ 0.914796] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.914797] pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.914813] NET: Registered protocol family 2 [ 0.914911] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.914979] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.915055] TCP: Hash tables configured (established 65536 bind 65536) [ 0.915069] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.915082] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.915111] NET: Registered protocol family 1 [ 0.915117] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.915598] PCI: CLS 0 bytes, default 64 [ 0.915620] Unpacking initramfs... [ 1.056176] Freeing initrd memory: 12348K (ffff8800367d2000 - ffff8800373e1000) [ 1.056179] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.056181] software IO TLB [mem 0xbecc2000-0xc2cc2000] (64MB) mapped at [ffff8800becc2000-ffff8800c2cc1fff] [ 1.056678] Scanning for low memory corruption every 60 seconds [ 1.056851] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.057153] Initialise system trusted keyrings [ 1.057423] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.058340] zbud: loaded [ 1.059038] Key type asymmetric registered [ 1.059055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.059182] io scheduler noop registered [ 1.059182] io scheduler deadline registered [ 1.059186] io scheduler cfq registered (default) [ 1.059482] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.059485] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.059490] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.059490] vesafb: scrolling: redraw [ 1.059491] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.059497] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k [ 1.195549] Console: switching to colour frame buffer device 240x67 [ 1.330603] fb0: VESA VGA frame buffer device [ 1.330610] intel_idle: MWAIT substates: 0x142120 [ 1.330611] intel_idle: v0.4.1 model 0x5E [ 1.330821] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.330932] GHES: HEST is not enabled! [ 1.330995] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.351685] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.352144] Linux agpgart interface v0.103 [ 1.352545] rtc_cmos 00:05: RTC can wake from S4 [ 1.352940] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.353020] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.353024] intel_pstate: Intel P-state driver initializing [ 1.353434] intel_pstate: HWP enabled [ 1.353838] ledtrig-cpu: registered to indicate activity on CPUs [ 1.354003] NET: Registered protocol family 10 [ 1.354372] NET: Registered protocol family 17 [ 1.354560] microcode: sig=0x506e3, pf=0x2, revision=0x84 [ 1.354871] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.355096] registered taskstats version 1 [ 1.355097] Loading compiled-in X.509 certificates [ 1.355105] zswap: loaded using pool lzo/zbud [ 1.356708] Magic number: 12:262:281 [ 1.356716] tty tty18: hash matches [ 1.356722] acpi INT3420:01: hash matches [ 1.356977] rtc_cmos 00:05: setting system clock to 2016-12-15 13:16:43 UTC (1481807803) [ 1.357037] PM: Hibernation image not present or could not be loaded. [ 1.357801] Freeing unused kernel memory: 1256K (ffffffff81b08000 - ffffffff81c42000) [ 1.357801] Write protecting the kernel read-only data: 10240k [ 1.358362] Freeing unused kernel memory: 2044K (ffff880001601000 - ffff880001800000) [ 1.358692] Freeing unused kernel memory: 136K (ffff8800019de000 - ffff880001a00000) [ 1.363416] random: systemd-tmpfile: uninitialized urandom read (16 bytes read) [ 1.363454] random: systemd-tmpfile: uninitialized urandom read (16 bytes read) [ 1.364690] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.364710] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.364714] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.366205] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.366213] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.367431] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.367443] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.367447] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.389669] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.393080] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.393086] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.403028] SCSI subsystem initialized [ 1.403556] ACPI: bus type USB registered [ 1.403568] usbcore: registered new interface driver usbfs [ 1.403572] usbcore: registered new interface driver hub [ 1.403616] usbcore: registered new device driver usb [ 1.405096] libata version 3.00 loaded. [ 1.406399] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.406401] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.407559] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.407562] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.407766] hub 1-0:1.0: USB hub found [ 1.407781] hub 1-0:1.0: 12 ports detected [ 1.411930] AVX2 version of gcm_enc/dec engaged. [ 1.411931] AES CTR mode by8 optimization enabled [ 1.416332] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.416334] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.416495] hub 2-0:1.0: USB hub found [ 1.416524] hub 2-0:1.0: 6 ports detected [ 1.420219] ahci 0000:00:17.0: version 3.0 [ 1.420693] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.420694] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 1.474550] scsi host0: ahci [ 1.474904] scsi host1: ahci [ 1.475278] scsi host2: ahci [ 1.475601] scsi host3: ahci [ 1.475863] scsi host4: ahci [ 1.476151] scsi host5: ahci [ 1.476179] ata1: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b100 irq 121 [ 1.476180] ata2: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b180 irq 121 [ 1.476181] ata3: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b200 irq 121 [ 1.476182] ata4: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b280 irq 121 [ 1.476186] ata5: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b300 irq 121 [ 1.476190] ata6: SATA max UDMA/133 abar m2048@0xf712b000 port 0xf712b380 irq 121 [ 1.733754] usb 1-5: new low-speed USB device number 2 using xhci_hcd [ 1.791348] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.791435] ata3: SATA link down (SStatus 4 SControl 300) [ 1.791594] ata6.00: supports DRM functions and may not be fully accessible [ 1.791712] ata1: SATA link down (SStatus 4 SControl 300) [ 1.791739] ata2: SATA link down (SStatus 4 SControl 300) [ 1.791873] ata4: SATA link down (SStatus 4 SControl 300) [ 1.791931] ata5: SATA link down (SStatus 4 SControl 300) [ 1.792266] ata6.00: NCQ Send/Recv Log not supported [ 1.792270] ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133 [ 1.792273] ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.792836] ata6.00: supports DRM functions and may not be fully accessible [ 1.793214] ata6.00: NCQ Send/Recv Log not supported [ 1.793466] ata6.00: configured for UDMA/133 [ 1.794203] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.837863] sd 5:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.838465] sd 5:0:0:0: [sda] Write Protect is off [ 1.838473] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.838654] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.839920] sda: sda1 sda2 [ 1.841341] sd 5:0:0:0: [sda] Attached SCSI disk [ 1.876150] hidraw: raw HID events driver (C) Jiri Kosina [ 1.885024] usbcore: registered new interface driver usbhid [ 1.885026] usbhid: USB HID core driver [ 1.886573] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C31C.0001/input/input2 [ 1.890338] device-mapper: uevent: version 1.0.3 [ 1.890603] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.940763] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-5/input0 [ 1.942324] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C31C.0002/input/input3 [ 1.987099] usb 1-6: new low-speed USB device number 3 using xhci_hcd [ 1.997286] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-5/input1 [ 2.080432] tsc: Refined TSC clocksource calibration: 3407.999 MHz [ 2.080447] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns [ 2.131906] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C062.0003/input/input4 [ 2.132092] hid-generic 0003:046D:C062.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:14.0-6/input0 [ 2.988123] random: fast init done [ 3.094076] clocksource: Switched to clocksource tsc [ 5.438982] NET: Registered protocol family 38 [ 5.588075] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 5.712364] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.738012] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 5.738493] systemd[1]: Detected architecture x86-64. [ 5.739670] systemd[1]: Set hostname to . [ 5.815896] random: crng init done [ 5.823504] systemd[1]: Listening on udev Control Socket. [ 5.823658] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.824878] systemd[1]: Listening on Process Core Dump Socket. [ 5.824910] systemd[1]: Reached target Remote File Systems. [ 5.824975] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.825000] systemd[1]: Reached target Login Prompts. [ 5.825086] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.866763] EXT4-fs (dm-2): re-mounted. Opts: data=ordered [ 5.871829] vboxdrv: loading out-of-tree module taints kernel. [ 5.876760] vboxdrv: Found 8 processor cores [ 5.897142] vboxdrv: TSC mode is Invariant, tentative frequency 3408004183 Hz [ 5.897143] vboxdrv: Successfully loaded version 5.1.10 (interface 0x00280000) [ 5.898068] VBoxPciLinuxInit [ 5.903902] vboxpci: IOMMU not found (not registered) [ 5.904591] VBoxNetAdp: Successfully started. [ 5.906271] VBoxNetFlt: Successfully started. [ 5.933270] systemd-journald[268]: Received request to flush runtime journal from PID 1 [ 5.948674] wmi: Mapper loaded [ 5.950335] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 5.950640] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 5.950642] ACPI: Sleep Button [SLPB] [ 5.950677] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 [ 5.950678] ACPI: Power Button [PWRB] [ 5.950713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 5.950714] ACPI: Power Button [PWRF] [ 5.953111] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.957151] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 5.968030] Bluetooth: Core ver 2.21 [ 5.968037] NET: Registered protocol family 31 [ 5.968037] Bluetooth: HCI device and connection manager initialized [ 5.968039] Bluetooth: HCI socket layer initialized [ 5.968041] Bluetooth: L2CAP socket layer initialized [ 5.968045] Bluetooth: SCO socket layer initialized [ 5.968281] [drm] Initialized drm 1.1.0 20060810 [ 5.972153] parport_pc 00:01: reported by Plug and Play ACPI [ 5.972263] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 6.017511] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.017512] ACPI: Thermal Zone [TZ00] (28 C) [ 6.017621] thermal LNXTHERM:01: registered as thermal_zone1 [ 6.017622] ACPI: Thermal Zone [TZ01] (30 C) [ 6.019644] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 6.021448] Bluetooth: HCI UART driver ver 2.3 [ 6.021449] Bluetooth: HCI UART protocol H4 registered [ 6.021450] Bluetooth: HCI UART protocol BCSP registered [ 6.021450] Bluetooth: HCI UART protocol LL registered [ 6.021451] Bluetooth: HCI UART protocol ATH3K registered [ 6.021452] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 6.021468] Bluetooth: HCI UART protocol Intel registered [ 6.021480] Bluetooth: HCI UART protocol BCM registered [ 6.021480] Bluetooth: HCI UART protocol QCA registered [ 6.021481] Bluetooth: HCI UART protocol AG6XX registered [ 6.021524] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.021528] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.027971] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 6.027972] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.027973] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.027973] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.027974] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.027974] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 6.033903] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffc90000eac000, f8:32:e4:88:90:5d, XID 14100800 IRQ 123 [ 6.033905] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.038933] [drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xc6000000 - 0xc8000000] [ 6.039889] [drm] Memory usable by graphics device = 4096M [ 6.039890] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 6.039891] fb: switching to inteldrmfb from VESA VGA [ 6.039907] Console: switching to colour dummy device 80x25 [ 6.039965] [drm] Replacing VGA console driver [ 6.045842] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.045843] [drm] Driver supports precise vblank timestamp query. [ 6.049932] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered [ 6.054031] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.054421] kvm: disabled by bios [ 6.056230] mousedev: PS/2 mouse device common for all mice [ 6.056638] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26) [ 6.058624] intel_rapl: Found RAPL domain package [ 6.058625] intel_rapl: Found RAPL domain core [ 6.058627] intel_rapl: Found RAPL domain uncore [ 6.058628] intel_rapl: Found RAPL domain dram [ 6.072048] asus_wmi: ASUS WMI generic driver loaded [ 6.073937] ppdev: user-space parallel port driver [ 6.075440] iTCO_vendor_support: vendor-support=0 [ 6.075833] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 6.075953] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.076063] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 6.076145] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.103285] Adding 8388604k swap on /dev/mapper/lvm-swap. Priority:-1 extents:1 across:8388604k SSFS [ 6.137182] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 6.137302] asus_wmi: Initialization: 0x0 [ 6.137316] asus_wmi: BIOS WMI version: 0.9 [ 6.137359] asus_wmi: SFUN value: 0x0 [ 6.137550] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10 [ 6.137629] asus_wmi: Number of fans: 1 [ 6.213184] r8169 0000:03:00.0 enp3s0: link down [ 6.213188] r8169 0000:03:00.0 enp3s0: link down [ 6.213272] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 6.323245] [drm] failed to retrieve link info, disabling eDP [ 6.324603] [drm] GuC firmware load skipped [ 6.328136] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.328197] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 6.328285] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.328288] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0 [ 6.344702] fbcon: inteldrmfb (fb0) is primary device [ 6.410617] Console: switching to colour frame buffer device 240x67 [ 6.429827] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.486181] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 6.486182] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.486183] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.486183] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.486184] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 [ 6.486184] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.486185] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 6.486186] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 6.486187] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 6.501906] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 6.501973] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 6.502027] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 6.502054] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 6.502080] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 6.502108] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 7.360856] [drm] RC6 on [ 7.842544] r8169 0000:03:00.0 enp3s0: link up [ 7.842556] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 10.337135] usb 1-11: new high-speed USB device number 4 using xhci_hcd [ 10.545680] usb-storage 1-11:1.0: USB Mass Storage device detected [ 10.545855] scsi host6: usb-storage 1-11:1.0 [ 10.545898] usbcore: registered new interface driver usb-storage [ 10.546590] usbcore: registered new interface driver uas [ 11.547920] scsi 6:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 6 [ 11.548907] sd 6:0:0:0: [sdb] 60555264 512-byte logical blocks: (31.0 GB/28.9 GiB) [ 11.549603] sd 6:0:0:0: [sdb] Write Protect is off [ 11.549608] sd 6:0:0:0: [sdb] Mode Sense: 2b 00 00 08 [ 11.550285] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 11.613684] sdb: sdb1 [ 11.616512] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 21.756476] QXcbEventReader[1063]: segfault at 7f5327535449 ip 00007f5327535449 sp 00007f53253e2de0 error 14 in locale-archive[7f53279fe000+1e6000] [ 56.025150] sdb: sdb1 [ 82.146832] sdb: sdb1 sdb2 [ 87.047058] usb 1-11: USB disconnect, device number 4 xorg.0.log: [ 6.486] (--) Log file renamed from "/var/log/Xorg.pid-455.log" to "/var/log/Xorg.0.log" [ 6.488] X.Org X Server 1.18.4 Release Date: 2016-07-19 [ 6.488] X Protocol Version 11, Revision 0 [ 6.488] Build Operating System: Linux 4.5.4-1-ARCH x86_64 [ 6.488] Current Operating System: Linux Skylake 4.8.12-3-ARCH #1 SMP PREEMPT Thu Dec 8 16:10:23 CET 2016 x86_64 [ 6.488] Build Date: 19 July 2016 05:54:24PM [ 6.488] [ 6.488] Current version of pixman: 0.34.0 [ 6.488] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 6.488] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 6.488] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 15 15:16:48 2016 [ 6.490] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 6.490] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 6.491] (==) No Layout section. Using the first Screen section. [ 6.491] (==) No screen section available. Using defaults. [ 6.491] (**) |-->Screen "Default Screen Section" (0) [ 6.491] (**) | |-->Monitor "" [ 6.491] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 6.491] (==) Automatically adding devices [ 6.491] (==) Automatically enabling devices [ 6.491] (==) Automatically adding GPU devices [ 6.491] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 6.495] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 6.495] Entry deleted from font path. [ 6.495] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 6.495] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 6.495] Entry deleted from font path. [ 6.495] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 6.495] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/ [ 6.495] (==) ModulePath set to "/usr/lib/xorg/modules" [ 6.495] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 6.495] (II) Loader magic: 0x821d40 [ 6.495] (II) Module ABI versions: [ 6.495] X.Org ANSI C Emulation: 0.4 [ 6.495] X.Org Video Driver: 20.0 [ 6.495] X.Org XInput driver : 22.1 [ 6.495] X.Org Server Extension : 9.0 [ 6.496] (++) using VT number 1 [ 6.496] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 6.496] (II) xfree86: Adding drm device (/dev/dri/card0) [ 6.507] (--) PCI:*(0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ 6.507] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 6.507] (II) LoadModule: "glx" [ 6.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 6.522] (II) Module glx: vendor="X.Org Foundation" [ 6.522] compiled for 1.18.4, module version = 1.0.0 [ 6.522] ABI class: X.Org Server Extension, version 9.0 [ 6.522] (==) AIGLX enabled [ 6.522] (==) Matched intel as autoconfigured driver 0 [ 6.522] (==) Matched intel as autoconfigured driver 1 [ 6.522] (==) Matched modesetting as autoconfigured driver 2 [ 6.522] (==) Matched fbdev as autoconfigured driver 3 [ 6.522] (==) Matched vesa as autoconfigured driver 4 [ 6.522] (==) Assigned the driver to the xf86ConfigLayout [ 6.522] (II) LoadModule: "intel" [ 6.522] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 6.525] (II) Module intel: vendor="X.Org Foundation" [ 6.525] compiled for 1.18.4, module version = 2.99.917 [ 6.525] Module class: X.Org Video Driver [ 6.525] ABI class: X.Org Video Driver, version 20.0 [ 6.525] (II) LoadModule: "modesetting" [ 6.525] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 6.525] (II) Module modesetting: vendor="X.Org Foundation" [ 6.525] compiled for 1.18.4, module version = 1.18.4 [ 6.525] Module class: X.Org Video Driver [ 6.525] ABI class: X.Org Video Driver, version 20.0 [ 6.525] (II) LoadModule: "fbdev" [ 6.525] (WW) Warning, couldn't open module fbdev [ 6.525] (II) UnloadModule: "fbdev" [ 6.525] (II) Unloading fbdev [ 6.525] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 6.525] (II) LoadModule: "vesa" [ 6.525] (WW) Warning, couldn't open module vesa [ 6.525] (II) UnloadModule: "vesa" [ 6.525] (II) Unloading vesa [ 6.525] (EE) Failed to load module "vesa" (module does not exist, 0) [ 6.525] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 6.525] (II) intel: Driver for Intel(R) HD Graphics [ 6.525] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 6.525] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 6.525] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 6.526] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711 [ 6.526] (II) intel(0): SNA compiled from 2.99.917-746-g169c74f [ 6.527] (WW) Falling back to old probe method for modesetting [ 6.528] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 530 [ 6.528] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads [ 6.528] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 6.528] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 6.528] (==) intel(0): RGB weight 888 [ 6.528] (==) intel(0): Default visual is TrueColor [ 6.528] (II) intel(0): Output HDMI1 has no monitor section [ 6.528] (II) intel(0): Enabled output HDMI1 [ 6.528] (II) intel(0): Output HDMI2 has no monitor section [ 6.528] (II) intel(0): Enabled output HDMI2 [ 6.528] (II) intel(0): Output DP1 has no monitor section [ 6.528] (II) intel(0): Enabled output DP1 [ 6.528] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 6.528] (II) intel(0): Output VIRTUAL1 has no monitor section [ 6.528] (II) intel(0): Enabled output VIRTUAL1 [ 6.528] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 0 [ 6.529] (==) intel(0): TearFree disabled [ 6.529] (==) intel(0): DPI set to (96, 96) [ 6.529] (II) Loading sub module "dri3" [ 6.529] (II) LoadModule: "dri3" [ 6.529] (II) Module "dri3" already built-in [ 6.529] (II) Loading sub module "dri2" [ 6.529] (II) LoadModule: "dri2" [ 6.529] (II) Module "dri2" already built-in [ 6.529] (II) Loading sub module "present" [ 6.529] (II) LoadModule: "present" [ 6.529] (II) Module "present" already built-in [ 6.529] (II) UnloadModule: "modesetting" [ 6.529] (II) Unloading modesetting [ 6.529] (==) Depth 24 pixmap format is 32 bpp [ 6.531] (II) intel(0): SNA initialized with Skylake (gen9) backend [ 6.531] (==) intel(0): Backing store enabled [ 6.531] (==) intel(0): Silken mouse enabled [ 6.532] (II) intel(0): HW Cursor enabled [ 6.532] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 6.532] (==) intel(0): DPMS enabled [ 6.532] (==) intel(0): Display hotplug detection enabled [ 6.532] (II) intel(0): [DRI2] Setup complete [ 6.532] (II) intel(0): [DRI2] DRI driver: i965 [ 6.532] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 6.532] (II) intel(0): direct rendering: DRI2 DRI3 enabled [ 6.532] (II) intel(0): hardware support for Present enabled [ 6.532] (--) RandR disabled [ 6.575] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 6.575] (II) AIGLX: enabled GLX_ARB_create_context [ 6.575] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 6.575] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 6.575] (II) AIGLX: enabled GLX_INTEL_swap_event [ 6.575] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 6.575] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 6.575] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 6.575] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 6.575] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 6.575] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 6.575] (II) AIGLX: Loaded and initialized i965 [ 6.575] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 6.581] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 6.590] (II) intel(0): Setting screen physical size to 508 x 285 [ 6.635] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 6.635] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.635] (**) Power Button: Applying InputClass "system-keyboard" [ 6.635] (II) LoadModule: "evdev" [ 6.635] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.637] (II) Module evdev: vendor="X.Org Foundation" [ 6.637] compiled for 1.18.4, module version = 2.10.4 [ 6.637] Module class: X.Org XInput Driver [ 6.637] ABI class: X.Org XInput driver, version 22.1 [ 6.637] (II) Using input driver 'evdev' for 'Power Button' [ 6.637] (**) Power Button: always reports core events [ 6.637] (**) evdev: Power Button: Device: "/dev/input/event5" [ 6.637] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.637] (--) evdev: Power Button: Found keys [ 6.637] (II) evdev: Power Button: Configuring as keyboard [ 6.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5" [ 6.637] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 6.637] (**) Option "xkb_rules" "evdev" [ 6.637] (**) Option "xkb_layout" "fi" [ 6.649] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 6.649] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 6.649] (**) Video Bus: Applying InputClass "system-keyboard" [ 6.649] (II) Using input driver 'evdev' for 'Video Bus' [ 6.649] (**) Video Bus: always reports core events [ 6.649] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 6.649] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 6.649] (--) evdev: Video Bus: Found keys [ 6.649] (II) evdev: Video Bus: Configuring as keyboard [ 6.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8" [ 6.649] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 6.649] (**) Option "xkb_rules" "evdev" [ 6.649] (**) Option "xkb_layout" "fi" [ 6.649] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 6.649] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.649] (**) Power Button: Applying InputClass "system-keyboard" [ 6.649] (II) Using input driver 'evdev' for 'Power Button' [ 6.649] (**) Power Button: always reports core events [ 6.649] (**) evdev: Power Button: Device: "/dev/input/event4" [ 6.649] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.649] (--) evdev: Power Button: Found keys [ 6.649] (II) evdev: Power Button: Configuring as keyboard [ 6.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4" [ 6.649] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 6.649] (**) Option "xkb_rules" "evdev" [ 6.649] (**) Option "xkb_layout" "fi" [ 6.649] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 6.649] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 6.649] (**) Sleep Button: Applying InputClass "system-keyboard" [ 6.649] (II) Using input driver 'evdev' for 'Sleep Button' [ 6.649] (**) Sleep Button: always reports core events [ 6.649] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 6.649] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 6.649] (--) evdev: Sleep Button: Found keys [ 6.649] (II) evdev: Sleep Button: Configuring as keyboard [ 6.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event3" [ 6.649] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 6.649] (**) Option "xkb_rules" "evdev" [ 6.649] (**) Option "xkb_layout" "fi" [ 6.650] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0) [ 6.650] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 6.650] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard" [ 6.650] (II) Using input driver 'evdev' for 'Logitech USB Keyboard' [ 6.650] (**) Logitech USB Keyboard: always reports core events [ 6.650] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0" [ 6.650] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c [ 6.650] (--) evdev: Logitech USB Keyboard: Found keys [ 6.650] (II) evdev: Logitech USB Keyboard: Configuring as keyboard [ 6.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C31C.0001/input/input2/event0" [ 6.650] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10) [ 6.650] (**) Option "xkb_rules" "evdev" [ 6.650] (**) Option "xkb_layout" "fi" [ 6.650] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1) [ 6.650] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 6.650] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard" [ 6.650] (II) Using input driver 'evdev' for 'Logitech USB Keyboard' [ 6.650] (**) Logitech USB Keyboard: always reports core events [ 6.650] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1" [ 6.650] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c [ 6.650] (--) evdev: Logitech USB Keyboard: Found absolute axes [ 6.650] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist. [ 6.650] (--) evdev: Logitech USB Keyboard: Found keys [ 6.650] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist. [ 6.650] (II) evdev: Logitech USB Keyboard: Configuring as mouse [ 6.650] (II) evdev: Logitech USB Keyboard: Configuring as keyboard [ 6.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C31C.0002/input/input3/event1" [ 6.651] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11) [ 6.651] (**) Option "xkb_rules" "evdev" [ 6.651] (**) Option "xkb_layout" "fi" [ 6.651] (II) evdev: Logitech USB Keyboard: initialized for absolute axes. [ 6.651] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1 [ 6.651] (**) Logitech USB Keyboard: (accel) acceleration profile 0 [ 6.651] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000 [ 6.651] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4 [ 6.651] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event2) [ 6.651] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" [ 6.651] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse' [ 6.651] (**) Logitech USB Laser Mouse: always reports core events [ 6.651] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event2" [ 6.706] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc062 [ 6.706] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons [ 6.706] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s) [ 6.706] (--) evdev: Logitech USB Laser Mouse: Found relative axes [ 6.706] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes [ 6.706] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse [ 6.706] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support [ 6.706] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5 [ 6.706] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6.706] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C062.0003/input/input4/event2" [ 6.706] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 12) [ 6.706] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes. [ 6.706] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1 [ 6.706] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0 [ 6.706] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000 [ 6.706] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4 [ 6.707] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0) [ 6.707] (II) No input driver specified, ignoring this device. [ 6.707] (II) This device may have been added with another device file. [ 6.707] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9) [ 6.707] (II) No input driver specified, ignoring this device. [ 6.707] (II) This device may have been added with another device file. [ 6.707] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10) [ 6.707] (II) No input driver specified, ignoring this device. [ 6.707] (II) This device may have been added with another device file. [ 6.707] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11) [ 6.707] (II) No input driver specified, ignoring this device. [ 6.707] (II) This device may have been added with another device file. [ 6.707] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12) [ 6.707] (II) No input driver specified, ignoring this device. [ 6.707] (II) This device may have been added with another device file. [ 6.707] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13) [ 6.707] (II) No input driver specified, ignoring this device. [ 6.707] (II) This device may have been added with another device file. [ 6.707] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14) [ 6.707] (II) No input driver specified, ignoring this device. [ 6.707] (II) This device may have been added with another device file. [ 6.708] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7) [ 6.708] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 6.708] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard" [ 6.708] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys' [ 6.708] (**) Eee PC WMI hotkeys: always reports core events [ 6.708] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7" [ 6.708] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0 [ 6.708] (--) evdev: Eee PC WMI hotkeys: Found keys [ 6.708] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard [ 6.708] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7" [ 6.708] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13) [ 6.708] (**) Option "xkb_rules" "evdev" [ 6.708] (**) Option "xkb_layout" "fi" [ 6.708] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 6.708] (II) No input driver specified, ignoring this device. [ 6.708] (II) This device may have been added with another device file. [ 6.723] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13) [ 6.723] (II) No input driver specified, ignoring this device. [ 6.723] (II) This device may have been added with another device file. [ 6.723] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14) [ 6.723] (II) No input driver specified, ignoring this device. [ 6.724] (II) This device may have been added with another device file. [ 6.724] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12) [ 6.724] (II) No input driver specified, ignoring this device. [ 6.724] (II) This device may have been added with another device file. [ 6.724] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10) [ 6.724] (II) No input driver specified, ignoring this device. [ 6.724] (II) This device may have been added with another device file. [ 6.724] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11) [ 6.724] (II) No input driver specified, ignoring this device. [ 6.724] (II) This device may have been added with another device file. [ 6.724] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9) [ 6.724] (II) No input driver specified, ignoring this device. [ 6.724] (II) This device may have been added with another device file.