[ 1910.263215] Suspended for 28547.898 seconds
[ 1910.263272] Enabling non-boot CPUs ...
[ 1910.263331] x86: Booting SMP configuration:
[ 1910.263332] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1910.266043]  cache: parent cpu1 should not be sleeping
[ 1910.266278] CPU1 is up
[ 1910.266322] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1910.269109]  cache: parent cpu2 should not be sleeping
[ 1910.269363] CPU2 is up
[ 1910.269404] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1910.271990]  cache: parent cpu3 should not be sleeping
[ 1910.272288] CPU3 is up
[ 1910.276523] ACPI: Waking up from system sleep state S4
[ 1910.281960] thinkpad_acpi: EC reports that Thermal Table has changed
[ 1910.288740] ACPI : EC: interrupt unblocked
[ 1910.312581] PM: noirq restore of devices complete after 23.990 msecs
[ 1910.312981] [drm:gen9_set_dc_state [i915]] *ERROR* DC state mismatch (0x0 -> 0x2)
[ 1910.324217] PM: early restore of devices complete after 11.612 msecs
[ 1910.393984] usb usb1: root hub lost power or was reset
[ 1910.393985] usb usb2: root hub lost power or was reset
[ 1910.394941] ACPI : button: The lid device is not compliant to SW_LID.
[ 1910.394947] ACPI : EC: event unblocked
[ 1910.395663] sd 1:0:0:0: [sda] Starting disk
[ 1910.395703] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 1910.400347] [drm] GuC firmware load skipped
[ 1910.504540] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[ 1910.504543] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 1910.708484] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1910.709015] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1910.709019] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1910.709069] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1910.709471] ata2.00: supports DRM functions and may not be fully accessible
[ 1910.711112] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1910.711116] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1910.711163] ata2.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 1910.711388] ata2.00: supports DRM functions and may not be fully accessible
[ 1910.712412] ata2.00: configured for UDMA/133
[ 1910.740551] usb 1-9: reset full-speed USB device number 5 using xhci_hcd
[ 1911.000581] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[ 1911.193483] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754]
[ 1911.225361] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..]
[ 1911.260552] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[ 1911.466948] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 1911.466983] qcserial 1-2:1.0: device disconnected
[ 1911.467350] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[ 1911.467385] qcserial 1-2:1.2: device disconnected
[ 1911.467719] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
[ 1911.467754] qcserial 1-2:1.3: device disconnected
[ 1911.640520] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[ 1911.825532] PM: restore of devices complete after 1431.662 msecs
[ 1911.825904] usb 1-7:1.0: rebind failed: -517
[ 1911.825916] usb 1-7:1.1: rebind failed: -517
[ 1911.825934] usb 1-2:1.0: rebind failed: -517
[ 1911.825943] usb 1-2:1.2: rebind failed: -517
[ 1911.825953] usb 1-2:1.3: rebind failed: -517
[ 1911.826443] PM: Image restored successfully.
[ 1911.826538] PM: Basic memory bitmaps freed
[ 1911.826545] Restarting tasks ... 
[ 1911.830980] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 1911.831345] done.
[ 1911.833615] qcserial 1-2:1.0: Qualcomm USB modem converter detected
[ 1911.833712] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0
[ 1911.834040] thermal thermal_zone3: failed to read out thermal zone (-5)
[ 1911.834124] qcserial 1-2:1.2: Qualcomm USB modem converter detected
[ 1911.834180] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB1
[ 1911.834525] qcserial 1-2:1.3: Qualcomm USB modem converter detected
[ 1911.834588] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB2
[ 1911.837972] Bluetooth: hci0: Device revision is 5
[ 1911.837974] Bluetooth: hci0: Secure boot is enabled
[ 1911.837975] Bluetooth: hci0: OTP lock is enabled
[ 1911.837976] Bluetooth: hci0: API lock is enabled
[ 1911.837977] Bluetooth: hci0: Debug lock is disabled
[ 1911.837978] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1911.855003] [drm] RC6 on
[ 1911.857891] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.sfi
[ 1911.857913] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 1912.034335] e1000e: eth0 NIC Link is Down
[ 1912.034911] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1912.252563] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1912.253507] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1912.256039] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.257012] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.385819] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.386334] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.474090] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1912.483578] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.484891] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.613684] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.614113] iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
[ 1912.702724] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1912.761529] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1913.320358] Bluetooth: hci0: Waiting for firmware download to complete
[ 1913.320989] Bluetooth: hci0: Firmware loaded in 1456907 usecs
[ 1913.321281] Bluetooth: hci0: Waiting for device to boot
[ 1913.333125] Bluetooth: hci0: Device booted in 11747 usecs
[ 1913.338066] bluetooth hci0: firmware: direct-loading firmware intel/ibt-11-5.ddc
[ 1913.338082] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 1913.339197] Bluetooth: hci0: Failed to send Intel_Write_DDC (-22)
[ 1916.334615] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1916.426184] wlan0: authenticate with xx:xx:xx:xx:xx:xx
[ 1916.434173] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[ 1916.440656] wlan0: authenticated
[ 1916.445017] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[ 1916.456023] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x11 status=0 aid=2)
[ 1916.459346] wlan0: associated
[ 1916.459379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1926.224886] usb 1-6: new full-speed USB device number 7 using xhci_hcd
[ 1926.367780] usb 1-6: New USB device found, idVendor=1bcf, idProduct=0824
[ 1926.367797] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1926.367806] usb 1-6: Product: SmartMouse
[ 1926.367813] usb 1-6: Manufacturer: SunplusIT
[ 1926.371750] input: SunplusIT SmartMouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1BCF:0824.0005/input/input20
[ 1926.430155] hid-generic 0003:1BCF:0824.0005: input,hidraw0: USB HID v1.00 Keyboard [SunplusIT SmartMouse] on usb-0000:00:14.0-6/input0
[ 1926.433666] input: SunplusIT SmartMouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1BCF:0824.0006/input/input21
[ 1926.493827] hid-generic 0003:1BCF:0824.0006: input,hidraw1: USB HID v1.00 Mouse [SunplusIT SmartMouse] on usb-0000:00:14.0-6/input1
[ 1935.798441] [drm] GPU HANG: ecode 9:1:0x4c32ff67, in Xorg [1902], reason: Hang on blitter ring, action: reset
[ 1935.798451] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[ 1935.798455] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[ 1935.798459] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[ 1935.798463] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[ 1935.798467] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 1935.798577] drm/i915: Resetting chip after gpu hang
[ 1935.798680] [drm] RC6 on
[ 1935.813067] [drm] GuC firmware load skipped
[ 1965.813831] drm/i915: Resetting chip after gpu hang
[ 1965.813944] [drm] RC6 on
[ 1965.829852] [drm] GuC firmware load skipped