[ 0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Linux version 4.11.0-rc2-drm-tip-2017-03-19-gd8839e27a-dirty (josh@yes) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #6 SMP Sun Mar 19 21:38:15 GMT 2017 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc2-drm-tip-2017-03-19-gd8839e27a-dirty root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c8299fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c829a000-0x00000000c849bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c849c000-0x00000000d75cefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d75cf000-0x00000000daeeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 2689FJG/Emerald Lake 2, BIOS 62CN34WW 04/26/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x19f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F80000000 write-back [ 0.000000] 7 base 180000000 mask FE0000000 write-back [ 0.000000] 8 base 19F800000 mask FFF800000 uncachable [ 0.000000] 9 base 19F600000 mask FFFE00000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0130-0x000f013f] mapped at [ffff8f97c00f0130] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8f97c0097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x199607000, 0x199607fff] PGTABLE [ 0.000000] BRK [0x199608000, 0x199608fff] PGTABLE [ 0.000000] BRK [0x199609000, 0x199609fff] PGTABLE [ 0.000000] BRK [0x19960a000, 0x19960afff] PGTABLE [ 0.000000] BRK [0x19960b000, 0x19960bfff] PGTABLE [ 0.000000] BRK [0x19960c000, 0x19960cfff] PGTABLE [ 0.000000] BRK [0x19960d000, 0x19960dfff] PGTABLE [ 0.000000] BRK [0x19960e000, 0x19960efff] PGTABLE [ 0.000000] BRK [0x19960f000, 0x19960ffff] PGTABLE [ 0.000000] BRK [0x199610000, 0x199610fff] PGTABLE [ 0.000000] BRK [0x199611000, 0x199611fff] PGTABLE [ 0.000000] BRK [0x199612000, 0x199612fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3266a000-0x3532cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0150 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 00008C (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: FACP 0x00000000DAFED000 0000F4 (v03 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: DSDT 0x00000000DAFF0000 00A485 (v02 LENOVO IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF7C000 000040 [ 0.000000] ACPI: FACS 0x00000000DAF7C000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 LENOVO PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000DAFEF000 0000A5 (v32 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: HPET 0x00000000DAFEC000 000038 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: APIC 0x00000000DAFEB000 000098 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: MCFG 0x00000000DAFEA000 00003C (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: SSDT 0x00000000DAFE9000 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFE8000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000DAFE7000 00003E (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000DAFE5000 000055 (v03 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: UEFI 0x00000000DAFE4000 000242 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x19f5d3000-0x19f5fdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000019f5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000c8299fff] [ 0.000000] node 0: [mem 0x00000000c849c000-0x00000000d75cefff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000019f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000019f5fffff] [ 0.000000] On node 0 totalpages: 1533290 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13696 pages used for memmap [ 0.000000] DMA32 zone: 876494 pages, LIFO batch:31 [ 0.000000] Normal zone: 10200 pages used for memmap [ 0.000000] Normal zone: 652800 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc829a000-0xc849bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xd75cf000-0xdaeeefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 38 pages/cpu @ffff8f995f200000 s115608 r8192 d31848 u262144 [ 0.000000] pcpu-alloc: s115608 r8192 d31848 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1509174 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc2-drm-tip-2017-03-19-gd8839e27a-dirty root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 5900428K/6133160K available (8916K kernel code, 1656K rwdata, 3696K rodata, 2236K init, 2232K bss, 232732K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:524544 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2394.377 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.75 BogoMIPS (lpj=9577508) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170119 [ 0.010969] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.010996] Security Framework initialized [ 0.010997] Yama: becoming mindful. [ 0.011013] AppArmor: AppArmor initialized [ 0.011416] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013008] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013721] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.013728] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.013955] CPU: Physical Processor ID: 0 [ 0.013956] CPU: Processor Core ID: 0 [ 0.013960] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.013961] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.013963] mce: CPU supports 7 MCE banks [ 0.013970] CPU0: Thermal monitoring enabled (TM1) [ 0.013980] process: using mwait in idle threads [ 0.013982] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.013983] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.014120] Freeing SMP alternatives memory: 32K [ 0.015379] ftrace: allocating 33849 entries in 133 pages [ 0.024088] smpboot: Max logical packages: 4 [ 0.024165] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.024619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065032] TSC deadline timer enabled [ 0.065036] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.065082] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.065104] ... version: 3 [ 0.065104] ... bit width: 48 [ 0.065105] ... generic registers: 4 [ 0.065106] ... value mask: 0000ffffffffffff [ 0.065106] ... max period: 00007fffffffffff [ 0.065107] ... fixed-purpose events: 3 [ 0.065107] ... event mask: 000000070000000f [ 0.065876] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.065895] smp: Bringing up secondary CPUs ... [ 0.065969] x86: Booting SMP configuration: [ 0.065970] .... node #0, CPUs: #1 #2 #3 [ 0.306023] smp: Brought up 1 node, 4 CPUs [ 0.306023] smpboot: Total of 4 processors activated (19159.00 BogoMIPS) [ 0.308118] sched_clock: Marking stable (308000000, 0)->(314189615, -6189615) [ 0.308392] devtmpfs: initialized [ 0.308442] x86/mm: Memory block size: 128MB [ 0.310692] evm: security.selinux [ 0.310693] evm: security.SMACK64 [ 0.310693] evm: security.SMACK64EXEC [ 0.310694] evm: security.SMACK64TRANSMUTE [ 0.310694] evm: security.SMACK64MMAP [ 0.310695] evm: security.ima [ 0.310695] evm: security.capability [ 0.310773] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes) [ 0.310841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.310854] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.310919] pinctrl core: initialized pinctrl subsystem [ 0.311013] RTC time: 18:31:25, date: 03/20/17 [ 0.311069] NET: Registered protocol family 16 [ 0.311268] cpuidle: using governor ladder [ 0.311292] cpuidle: using governor menu [ 0.311294] PCCT header not found. [ 0.311331] ACPI: bus type PCI registered [ 0.311332] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.311458] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.311470] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.311477] PCI: Using configuration type 1 for base access [ 0.311524] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.312714] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.312940] ACPI: Added _OSI(Module Device) [ 0.312941] ACPI: Added _OSI(Processor Device) [ 0.312942] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.312943] ACPI: Added _OSI(Processor Aggregator Device) [ 0.313105] ACPI: Executed 1 blocks of module-level executable AML code [ 0.316521] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.316840] ACPI: Dynamic OEM Table Load: [ 0.316848] ACPI: SSDT 0xFFFF8F995D537000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.317136] ACPI: Dynamic OEM Table Load: [ 0.317142] ACPI: SSDT 0xFFFF8F995D568C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.317349] ACPI: Dynamic OEM Table Load: [ 0.317354] ACPI: SSDT 0xFFFF8F995D611000 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.318020] ACPI : EC: EC started [ 0.318021] ACPI : EC: interrupt blocked [ 0.319472] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.319474] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.319475] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.319476] ACPI: Interpreter enabled [ 0.319497] ACPI: (supports S0 S1 S3 S4 S5) [ 0.319498] ACPI: Using IOAPIC for interrupt routing [ 0.319519] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.325530] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.325534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.325652] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.326083] PCI host bridge to bus 0000:00 [ 0.326085] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.326086] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.326088] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.326089] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.326090] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.326097] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.326185] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.326194] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.326199] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.326203] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.326304] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.326324] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit] [ 0.326398] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.326440] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.326474] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.326495] pci 0000:00:16.0: reg 0x10: [mem 0xf0615000-0xf061500f 64bit] [ 0.326570] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.326651] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.326669] pci 0000:00:1a.0: reg 0x10: [mem 0xf0619000-0xf06193ff] [ 0.326756] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.326812] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.326847] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.326865] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit] [ 0.326942] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.326990] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.327024] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.327104] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.327151] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.327184] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.327264] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.327311] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.327346] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.327425] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.327473] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.327511] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.327529] pci 0000:00:1d.0: reg 0x10: [mem 0xf0618000-0xf06183ff] [ 0.327616] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.327671] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.327706] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 0.327878] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.327894] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.327902] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.327910] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.327918] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.327926] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.327934] pci 0000:00:1f.2: reg 0x24: [mem 0xf0617000-0xf06177ff] [ 0.327977] pci 0000:00:1f.2: PME# supported from D3hot [ 0.328043] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.328060] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit] [ 0.328081] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.328218] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.328311] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 [ 0.328363] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit] [ 0.328630] pci 0000:02:00.0: supports D1 [ 0.328631] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.328721] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.340992] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.341006] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.341171] pci 0000:03:00.0: [1969:1090] type 00 class 0x020000 [ 0.341277] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf043ffff 64bit] [ 0.341324] pci 0000:03:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.341785] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.341886] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.353018] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.353026] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.353034] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.353548] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.353600] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.353650] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.353699] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.353748] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.353796] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.353845] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.353894] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.354035] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.354095] ACPI : EC: interrupt unblocked [ 0.354101] ACPI : EC: event unblocked [ 0.354107] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.354109] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.354241] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.354243] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.354246] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.354246] vgaarb: loaded [ 0.354387] SCSI subsystem initialized [ 0.354429] libata version 3.00 loaded. [ 0.354444] ACPI: bus type USB registered [ 0.354458] usbcore: registered new interface driver usbfs [ 0.354464] usbcore: registered new interface driver hub [ 0.354479] usbcore: registered new device driver usb [ 0.354571] PCI: Using ACPI for IRQ routing [ 0.356167] PCI: pci_cache_line_size set to 64 bytes [ 0.356238] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.356239] e820: reserve RAM buffer [mem 0xc829a000-0xcbffffff] [ 0.356240] e820: reserve RAM buffer [mem 0xd75cf000-0xd7ffffff] [ 0.356241] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.356242] e820: reserve RAM buffer [mem 0x19f600000-0x19fffffff] [ 0.356324] NetLabel: Initializing [ 0.356325] NetLabel: domain hash size = 128 [ 0.356325] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.356342] NetLabel: unlabeled traffic allowed by default [ 0.356435] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.356440] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.358465] clocksource: Switched to clocksource hpet [ 0.368250] VFS: Disk quotas dquot_6.6.0 [ 0.368270] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.368341] AppArmor: AppArmor Filesystem Enabled [ 0.368386] pnp: PnP ACPI init [ 0.368518] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.368520] system 00:00: [io 0xffff] has been reserved [ 0.368521] system 00:00: [io 0xffff] has been reserved [ 0.368523] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.368524] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.368526] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.368528] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.368531] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.368555] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.368602] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.368604] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.368673] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.368692] pnp 00:04: Plug and Play ACPI device, IDs SYN0330 SYN0300 SYN0002 PNP0f13 (active) [ 0.368812] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.368813] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.368815] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.368816] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.368818] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.368819] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.368820] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.368821] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.368823] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.368825] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.368826] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved [ 0.368828] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.369048] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 0.369050] system 00:06: [mem 0x40000000-0x401fffff] has been reserved [ 0.369052] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.369068] pnp: PnP ACPI: found 7 devices [ 0.375251] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.375282] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.375295] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.375300] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff] [ 0.375308] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.375311] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.375316] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.375325] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.375326] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.375327] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.375329] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window] [ 0.375330] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.375331] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.375332] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.375420] NET: Registered protocol family 2 [ 0.375571] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.375699] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.375828] TCP: Hash tables configured (established 65536 bind 65536) [ 0.375866] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.375892] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.375954] NET: Registered protocol family 1 [ 0.375968] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.376671] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.376680] PCI: CLS 64 bytes, default 64 [ 0.376734] Trying to unpack rootfs image as initramfs... [ 1.120575] Freeing initrd memory: 45836K [ 1.120619] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.120621] software IO TLB [mem 0xd35cf000-0xd75cf000] (64MB) mapped at [ffff8f98935cf000-ffff8f98975cefff] [ 1.120829] Scanning for low memory corruption every 60 seconds [ 1.121138] audit: initializing netlink subsys (disabled) [ 1.121168] audit: type=2000 audit(1490034685.116:1): state=initialized audit_enabled=0 res=1 [ 1.121509] Initialise system trusted keyrings [ 1.121582] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.122652] zbud: loaded [ 1.123036] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.123181] fuse init (API version 7.26) [ 1.123287] Allocating IMA blacklist keyring. [ 1.124601] Key type asymmetric registered [ 1.124602] Asymmetric key parser 'x509' registered [ 1.124613] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.124642] io scheduler noop registered [ 1.124643] io scheduler deadline registered [ 1.124667] io scheduler cfq registered (default) [ 1.124668] io scheduler mq-deadline registered [ 1.125151] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 1.125152] vesafb: scrolling: redraw [ 1.125153] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.125164] vesafb: framebuffer at 0xe0000000, mapped to 0xffff9b5d41800000, using 4160k, total 4160k [ 1.196983] Console: switching to colour frame buffer device 170x48 [ 1.268498] fb0: VESA VGA frame buffer device [ 1.268511] intel_idle: MWAIT substates: 0x21120 [ 1.268511] intel_idle: v0.4.1 model 0x2A [ 1.268652] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.268737] ACPI: AC Adapter [ADP1] (on-line) [ 1.268824] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.268833] ACPI: Lid Switch [LID0] [ 1.268864] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.268866] ACPI: Sleep Button [SLPB] [ 1.268894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.268895] ACPI: Power Button [PWRF] [ 1.269890] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.270100] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.270101] ACPI: Thermal Zone [TZS0] (50 C) [ 1.270278] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.270278] ACPI: Thermal Zone [TZS1] (36 C) [ 1.270305] GHES: HEST is not enabled! [ 1.270381] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.270920] ACPI: Battery Slot [BAT0] (battery present) [ 1.271744] Linux agpgart interface v0.103 [ 1.274284] brd: module loaded [ 1.275767] loop: module loaded [ 1.275925] libphy: Fixed MDIO Bus: probed [ 1.275926] tun: Universal TUN/TAP device driver, 1.6 [ 1.275926] tun: (C) 1999-2004 Max Krasnyansky [ 1.275957] PPP generic driver version 2.4.2 [ 1.275996] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.275998] ehci-pci: EHCI PCI platform driver [ 1.276134] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.276143] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.276157] ehci-pci 0000:00:1a.0: debug port 2 [ 1.280065] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.280077] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0619000 [ 1.294647] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.294752] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.294753] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.294755] usb usb1: Product: EHCI Host Controller [ 1.294756] usb usb1: Manufacturer: Linux 4.11.0-rc2-drm-tip-2017-03-19-gd8839e27a-dirty ehci_hcd [ 1.294757] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.294968] hub 1-0:1.0: USB hub found [ 1.294975] hub 1-0:1.0: 3 ports detected [ 1.295243] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.295248] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.295260] ehci-pci 0000:00:1d.0: debug port 2 [ 1.299171] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.299184] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0618000 [ 1.314650] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.314748] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.314750] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.314751] usb usb2: Product: EHCI Host Controller [ 1.314752] usb usb2: Manufacturer: Linux 4.11.0-rc2-drm-tip-2017-03-19-gd8839e27a-dirty ehci_hcd [ 1.314753] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.314958] hub 2-0:1.0: USB hub found [ 1.314965] hub 2-0:1.0: 3 ports detected [ 1.315118] ehci-platform: EHCI generic platform driver [ 1.315133] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.315136] ohci-pci: OHCI PCI platform driver [ 1.315145] ohci-platform: OHCI generic platform driver [ 1.315152] uhci_hcd: USB Universal Host Controller Interface driver [ 1.315293] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.315298] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.316383] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 1.316388] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.316473] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.316474] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.316475] usb usb3: Product: xHCI Host Controller [ 1.316476] usb usb3: Manufacturer: Linux 4.11.0-rc2-drm-tip-2017-03-19-gd8839e27a-dirty xhci-hcd [ 1.316477] usb usb3: SerialNumber: 0000:00:14.0 [ 1.316670] hub 3-0:1.0: USB hub found [ 1.316680] hub 3-0:1.0: 4 ports detected [ 1.317012] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.317015] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.317044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.317046] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.317047] usb usb4: Product: xHCI Host Controller [ 1.317048] usb usb4: Manufacturer: Linux 4.11.0-rc2-drm-tip-2017-03-19-gd8839e27a-dirty xhci-hcd [ 1.317049] usb usb4: SerialNumber: 0000:00:14.0 [ 1.317239] hub 4-0:1.0: USB hub found [ 1.317250] hub 4-0:1.0: 4 ports detected [ 1.317634] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.320822] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.320826] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.321095] mousedev: PS/2 mouse device common for all mice [ 1.321413] rtc_cmos 00:01: RTC can wake from S4 [ 1.321556] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.321583] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.321588] i2c /dev entries driver [ 1.321632] device-mapper: uevent: version 1.0.3 [ 1.321695] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.321699] intel_pstate: Intel P-state driver initializing [ 1.321835] ledtrig-cpu: registered to indicate activity on CPUs [ 1.322136] NET: Registered protocol family 10 [ 1.325890] Segment Routing with IPv6 [ 1.325910] NET: Registered protocol family 17 [ 1.325919] Key type dns_resolver registered [ 1.326167] microcode: sig=0x206a7, pf=0x10, revision=0x29 [ 1.326215] microcode: Microcode Update Driver: v2.2. [ 1.326322] registered taskstats version 1 [ 1.326334] Loading compiled-in X.509 certificates [ 1.328949] Loaded X.509 cert 'Build time autogenerated kernel key: d0db91ad4d98297b9e479783fef85d45481db60c' [ 1.328976] zswap: loaded using pool lzo/zbud [ 1.340579] Key type big_key registered [ 1.340583] Key type trusted registered [ 1.342122] Key type encrypted registered [ 1.342125] AppArmor: AppArmor sha1 policy hashing enabled [ 1.342127] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.342145] evm: HMAC attrs: 0x1 [ 1.342421] Magic number: 9:870:544 [ 1.342439] tty ttyS20: hash matches [ 1.342527] rtc_cmos 00:01: setting system clock to 2017-03-20 18:31:26 UTC (1490034686) [ 1.342628] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.342629] EDD information not available. [ 1.342675] PM: Hibernation image not present or could not be loaded. [ 1.344668] Freeing unused kernel memory: 2236K [ 1.344669] Write protecting the kernel read-only data: 14336k [ 1.345050] Freeing unused kernel memory: 1308K [ 1.345081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.346064] Freeing unused kernel memory: 400K [ 1.348392] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.359382] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.359456] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.359470] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.359484] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.359968] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.359998] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.361099] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.361151] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.361165] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.361543] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.405106] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 1.443084] ahci 0000:00:1f.2: version 3.0 [ 1.443291] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.454016] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode [ 1.454019] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.456988] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [3c:97:0e:06:aa:95] [ 1.487267] scsi host0: ahci [ 1.489926] scsi host1: ahci [ 1.490165] scsi host2: ahci [ 1.490298] scsi host3: ahci [ 1.490575] scsi host4: ahci [ 1.506584] scsi host5: ahci [ 1.506670] ata1: DUMMY [ 1.506674] ata2: SATA max UDMA/133 abar m2048@0xf0617000 port 0xf0617180 irq 25 [ 1.506675] ata3: DUMMY [ 1.506676] ata4: DUMMY [ 1.506679] ata5: SATA max UDMA/133 abar m2048@0xf0617000 port 0xf0617300 irq 25 [ 1.506680] ata6: DUMMY [ 1.510353] alx 0000:03:00.0 enp3s0: renamed from eth0 [ 1.622587] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.646583] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.770938] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.770940] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.771192] hub 1-1:1.0: USB hub found [ 1.771279] hub 1-1:1.0: 6 ports detected [ 1.794939] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.794942] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.795197] hub 2-1:1.0: USB hub found [ 1.795283] hub 2-1:1.0: 6 ports detected [ 1.820945] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.827350] ata2.00: failed to enable AA (error_mask=0x1) [ 1.827899] ata2.00: ATA-8: ST750LM022 HN-M750MBB, 2AR10001, max UDMA/100 [ 1.827900] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.834279] ata2.00: failed to enable AA (error_mask=0x1) [ 1.834841] ata2.00: configured for UDMA/100 [ 1.835109] scsi 1:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0001 PQ: 0 ANSI: 5 [ 1.997616] [drm] Memory usable by graphics device = 2048M [ 1.997618] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 1.997619] fb: switching to inteldrmfb from VESA VGA [ 1.997642] Console: switching to colour dummy device 80x25 [ 1.997721] [drm] Replacing VGA console driver [ 2.003859] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.003861] [drm] Driver supports precise vblank timestamp query. [ 2.006588] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.026754] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.026768] sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 2.026771] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 2.026792] sd 1:0:0:0: [sda] Write Protect is off [ 2.026794] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.026824] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.036727] random: fast init done [ 2.050120] [drm] Initialized i915 1.6.0 20170306 for 0000:00:02.0 on minor 0 [ 2.050736] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.050900] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 2.050965] [drm] Initialized i915 1.6.0 20170306 for 0000:00:02.0 on minor 0 [ 2.059049] sda: sda1 sda2 < sda5 > [ 2.059683] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.062642] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 2.085018] fbcon: inteldrmfb (fb0) is primary device [ 2.086694] usb 2-1.6: new high-speed USB device number 3 using ehci-pci [ 2.146682] tsc: Refined TSC clocksource calibration: 2394.561 MHz [ 2.146702] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842564e28, max_idle_ns: 440795246705 ns [ 2.156785] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902] [ 2.175762] usb 1-1.2: New USB device found, idVendor=045e, idProduct=00cb [ 2.175767] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.175771] usb 1-1.2: Product: Microsoft Basic Optical Mouse v2.0 [ 2.175774] usb 1-1.2: Manufacturer: Microsoft [ 2.188961] hidraw: raw HID events driver (C) Jiri Kosina [ 2.196807] usb 2-1.6: New USB device found, idVendor=058f, idProduct=6366 [ 2.196809] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.196810] usb 2-1.6: Product: Flash Card Reader/Writer [ 2.196811] usb 2-1.6: Manufacturer: Generic [ 2.196812] usb 2-1.6: SerialNumber: 058F63666435 [ 2.200466] usbcore: registered new interface driver usbhid [ 2.200467] usbhid: USB HID core driver [ 2.205937] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:00CB.0001/input/input7 [ 2.206073] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.0-1.2/input0 [ 2.217117] usb-storage 2-1.6:1.0: USB Mass Storage device detected [ 2.217289] scsi host6: usb-storage 2-1.6:1.0 [ 2.217371] usbcore: registered new interface driver usb-storage [ 2.221597] usbcore: registered new interface driver uas [ 2.230742] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1695, fw id: 739436 [ 2.254681] usb 1-1.4: new full-speed USB device number 4 using ehci-pci [ 2.267338] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.341937] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.345139] ata5.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100 [ 2.351501] ata5.00: configured for UDMA/100 [ 2.359127] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5 [ 2.363468] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3002 [ 2.363473] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.392985] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.392986] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.393139] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.393222] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.446035] usb 1-1.5: new high-speed USB device number 5 using ehci-pci [ 2.570103] usb 1-1.5: New USB device found, idVendor=5986, idProduct=0294 [ 2.570108] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.570112] usb 1-1.5: Product: Lenovo EasyCamera [ 2.570115] usb 1-1.5: Manufacturer: Bison Corp. [ 3.046045] Console: switching to colour frame buffer device 170x48 [ 3.082239] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.170986] clocksource: Switched to clocksource tsc [ 3.235768] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.236103] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.237508] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 11.158968] random: crng init done [ 14.576152] NET: Registered protocol family 38 [ 16.035673] raid6: sse2x1 gen() 6290 MB/s [ 16.103681] raid6: sse2x1 xor() 4897 MB/s [ 16.171685] raid6: sse2x2 gen() 7916 MB/s [ 16.239691] raid6: sse2x2 xor() 5684 MB/s [ 16.307694] raid6: sse2x4 gen() 9028 MB/s [ 16.375701] raid6: sse2x4 xor() 6749 MB/s [ 16.375702] raid6: using algorithm sse2x4 gen() 9028 MB/s [ 16.375703] raid6: .... xor() 6749 MB/s, rmw enabled [ 16.375704] raid6: using ssse3x2 recovery algorithm [ 16.377997] xor: automatically using best checksumming function avx [ 16.535950] Btrfs loaded, crc32c=crc32c-intel [ 17.145851] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 18.597704] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 18.597837] systemd[1]: Detected architecture x86-64. [ 18.614892] systemd[1]: Set hostname to . [ 21.004075] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 21.004168] systemd[1]: Listening on LVM2 poll daemon socket. [ 21.004907] systemd[1]: Created slice System Slice. [ 21.004945] systemd[1]: Listening on LVM2 metadata daemon socket. [ 21.005196] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 21.005226] systemd[1]: Listening on udev Kernel Socket. [ 21.005466] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 22.075469] lp: driver loaded but no devices found [ 22.295322] ppdev: user-space parallel port driver [ 22.801116] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.655064] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 24.676140] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.156947] EXT4-fs (dm-1): warning: checktime reached, running e2fsck is recommended [ 26.184990] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 26.580173] systemd-journald[420]: Received request to flush runtime journal from PID 1 [ 27.806239] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170119/utaddress-247) [ 27.806246] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.806248] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247) [ 27.806251] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.806252] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247) [ 27.806255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.806255] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247) [ 27.806258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.806258] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 27.812862] wmi: Mapper loaded [ 28.282678] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8 [ 29.274638] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.013010] media: Linux media interface: v0.10 [ 33.314657] Linux video capture interface: v2.00 [ 33.854901] Bluetooth: Core ver 2.22 [ 33.854925] NET: Registered protocol family 31 [ 33.854926] Bluetooth: HCI device and connection manager initialized [ 33.854930] Bluetooth: HCI socket layer initialized [ 33.854932] Bluetooth: L2CAP socket layer initialized [ 33.854939] Bluetooth: SCO socket layer initialized [ 34.732850] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294) [ 34.734523] uvcvideo 1-1.5:1.0: Entity type for entity Processing 2 was not initialized! [ 34.734525] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized! [ 34.734526] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized! [ 34.734600] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9 [ 34.734653] usbcore: registered new interface driver uvcvideo [ 34.734654] USB Video Class driver (1.1.1) [ 35.775755] usbcore: registered new interface driver btusb [ 36.148455] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 36.148457] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 36.148458] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 36.148459] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 36.148460] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 36.148462] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 36.148463] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 36.605323] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 36.644830] usbcore: registered new interface driver ath3k [ 36.651680] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 36.651755] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 36.651807] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 36.867845] usb 1-1.4: USB disconnect, device number 4 [ 37.233335] usb 1-1.4: new full-speed USB device number 6 using ehci-pci [ 37.466429] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3005 [ 37.466436] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 39.452714] intel_rapl: Found RAPL domain package [ 39.452716] intel_rapl: Found RAPL domain core [ 39.452717] intel_rapl: Found RAPL domain uncore [ 39.452721] intel_rapl: RAPL package 0 domain package locked by BIOS [ 46.737822] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 46.863249] Adding 6131708k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:6131708k FS [ 47.108462] ath: phy0: ASPM enabled: 0x43 [ 47.108465] ath: EEPROM regdomain: 0x65 [ 47.108466] ath: EEPROM indicates we should expect a direct regpair map [ 47.108468] ath: Country alpha2 being used: 00 [ 47.108468] ath: Regpair used: 0x65 [ 47.259720] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 47.295809] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 47.296247] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffff9b5d41740000, irq=17 [ 47.297689] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 [ 50.844763] audit: type=1400 audit(1490034735.992:2): apparmor="STATUS" operation="profile_load" name="docker-default" pid=1034 comm="apparmor_parser" [ 51.041768] audit: type=1400 audit(1490034736.188:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=1037 comm="apparmor_parser" [ 51.041996] audit: type=1400 audit(1490034736.188:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1037 comm="apparmor_parser" [ 51.058816] audit: type=1400 audit(1490034736.208:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1035 comm="apparmor_parser" [ 51.059226] audit: type=1400 audit(1490034736.208:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1035 comm="apparmor_parser" [ 51.059560] audit: type=1400 audit(1490034736.208:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1035 comm="apparmor_parser" [ 51.059881] audit: type=1400 audit(1490034736.208:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1035 comm="apparmor_parser" [ 51.116339] audit: type=1400 audit(1490034736.264:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=1043 comm="apparmor_parser" [ 51.116522] audit: type=1400 audit(1490034736.264:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1043 comm="apparmor_parser" [ 51.208933] audit: type=1400 audit(1490034736.356:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=1045 comm="apparmor_parser" [ 61.831352] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 61.831354] Bluetooth: BNEP filters: protocol multicast [ 61.831359] Bluetooth: BNEP socket layer initialized [ 65.309150] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 65.325280] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 65.330885] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 65.334131] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 66.944902] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 69.032452] wlp2s0: authenticate with 30:b5:c2:79:f5:6e [ 69.052981] wlp2s0: send auth to 30:b5:c2:79:f5:6e (try 1/3) [ 69.055076] wlp2s0: authenticated [ 69.055768] wlp2s0: associate with 30:b5:c2:79:f5:6e (try 1/3) [ 69.059683] wlp2s0: RX AssocResp from 30:b5:c2:79:f5:6e (capab=0x431 status=0 aid=2) [ 69.059882] wlp2s0: associated [ 69.059892] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 87.947620] Bluetooth: RFCOMM TTY layer initialized [ 87.947628] Bluetooth: RFCOMM socket layer initialized [ 87.947633] Bluetooth: RFCOMM ver 1.11 [ 431.302931] [drm] Atomic update on pipe (A) took 132 us, max time under evasion is 100 us [ 432.319859] [drm] Atomic update on pipe (A) took 122 us, max time under evasion is 100 us [ 435.335157] [drm] Atomic update on pipe (A) took 131 us, max time under evasion is 100 us [ 436.351130] [drm] Atomic update on pipe (A) took 146 us, max time under evasion is 100 us [ 439.370558] [drm] Atomic update on pipe (A) took 145 us, max time under evasion is 100 us [ 439.867678] [drm] Atomic update on pipe (A) took 169 us, max time under evasion is 100 us [ 440.380147] [drm] Atomic update on pipe (A) took 161 us, max time under evasion is 100 us [ 443.403388] [drm] Atomic update on pipe (A) took 163 us, max time under evasion is 100 us [ 493.808879] [drm] Atomic update on pipe (A) took 231 us, max time under evasion is 100 us [ 502.887766] [drm] Atomic update on pipe (A) took 223 us, max time under evasion is 100 us [ 503.906622] [drm] Atomic update on pipe (A) took 224 us, max time under evasion is 100 us [ 508.954665] [drm] Atomic update on pipe (A) took 185 us, max time under evasion is 100 us [ 510.983626] [drm] Atomic update on pipe (A) took 136 us, max time under evasion is 100 us [ 511.976860] [drm] Atomic update on pipe (A) took 141 us, max time under evasion is 100 us [ 536.200487] [drm] Atomic update on pipe (A) took 207 us, max time under evasion is 100 us [ 540.227397] [drm] Atomic update on pipe (A) took 157 us, max time under evasion is 100 us [ 544.097855] [drm] Atomic update on pipe (A) took 155 us, max time under evasion is 100 us [ 597.761523] [drm] Atomic update on pipe (A) took 129 us, max time under evasion is 100 us [ 599.778253] [drm] Atomic update on pipe (A) took 188 us, max time under evasion is 100 us [ 600.789586] [drm] Atomic update on pipe (A) took 184 us, max time under evasion is 100 us [ 604.823934] [drm] Atomic update on pipe (A) took 140 us, max time under evasion is 100 us [ 606.830357] [drm] Atomic update on pipe (A) took 165 us, max time under evasion is 100 us [ 613.892002] [drm] Atomic update on pipe (A) took 125 us, max time under evasion is 100 us [ 617.933494] [drm] Atomic update on pipe (A) took 122 us, max time under evasion is 100 us [ 622.976530] [drm] Atomic update on pipe (A) took 219 us, max time under evasion is 100 us [ 659.287666] [drm] Atomic update on pipe (A) took 160 us, max time under evasion is 100 us [ 672.377878] [drm] Atomic update on pipe (A) took 130 us, max time under evasion is 100 us [ 758.099507] [drm] Atomic update on pipe (A) took 196 us, max time under evasion is 100 us [ 763.125261] [drm] Atomic update on pipe (A) took 131 us, max time under evasion is 100 us [ 764.142284] [drm] Atomic update on pipe (A) took 172 us, max time under evasion is 100 us [ 792.370983] [drm] Atomic update on pipe (A) took 135 us, max time under evasion is 100 us [ 817.593960] [drm] Atomic update on pipe (A) took 148 us, max time under evasion is 100 us [ 836.799318] [drm] Atomic update on pipe (A) took 199 us, max time under evasion is 100 us [ 851.985208] [drm] Atomic update on pipe (A) took 187 us, max time under evasion is 100 us [ 870.491872] [drm] Atomic update on pipe (A) took 148 us, max time under evasion is 100 us [ 882.291753] [drm] Atomic update on pipe (A) took 184 us, max time under evasion is 100 us [ 883.298352] [drm] Atomic update on pipe (A) took 115 us, max time under evasion is 100 us [ 887.365723] [drm] Atomic update on pipe (A) took 160 us, max time under evasion is 100 us [ 907.530067] [drm] Atomic update on pipe (A) took 165 us, max time under evasion is 100 us [ 910.554839] [drm] Atomic update on pipe (A) took 137 us, max time under evasion is 100 us [ 912.578659] [drm] Atomic update on pipe (A) took 122 us, max time under evasion is 100 us [ 914.592491] [drm] Atomic update on pipe (A) took 165 us, max time under evasion is 100 us [ 915.609596] [drm] Atomic update on pipe (A) took 214 us, max time under evasion is 100 us [ 3222.003465] perf: interrupt took too long (2616 > 2500), lowering kernel.perf_event_max_sample_rate to 76250 [ 3686.824322] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 3709.599476] [drm] Atomic update on pipe (A) took 193 us, max time under evasion is 100 us [ 3747.895148] [drm] Atomic update on pipe (A) took 232 us, max time under evasion is 100 us [ 3791.287505] [drm] Atomic update on pipe (A) took 156 us, max time under evasion is 100 us [ 3831.594836] [drm] Atomic update on pipe (A) took 131 us, max time under evasion is 100 us [ 3832.587820] [drm] Atomic update on pipe (A) took 121 us, max time under evasion is 100 us [ 3922.262236] [drm] Atomic update on pipe (A) took 146 us, max time under evasion is 100 us [ 3956.495134] [drm] Atomic update on pipe (A) took 180 us, max time under evasion is 100 us [ 4049.171531] [drm] Atomic update on pipe (A) took 143 us, max time under evasion is 100 us [ 4062.266082] [drm] Atomic update on pipe (A) took 115 us, max time under evasion is 100 us [ 4064.283982] [drm] Atomic update on pipe (A) took 173 us, max time under evasion is 100 us [ 4076.378519] [drm] Atomic update on pipe (A) took 176 us, max time under evasion is 100 us [ 4089.492977] [drm] Atomic update on pipe (A) took 103 us, max time under evasion is 100 us [ 4093.531274] [drm] Atomic update on pipe (A) took 270 us, max time under evasion is 100 us [ 4095.542452] [drm] Atomic update on pipe (A) took 170 us, max time under evasion is 100 us [ 4107.683810] [drm] Atomic update on pipe (A) took 163 us, max time under evasion is 100 us [ 4110.710868] [drm] Atomic update on pipe (A) took 156 us, max time under evasion is 100 us [ 4113.737090] [drm] Atomic update on pipe (A) took 185 us, max time under evasion is 100 us [ 4132.870840] [drm] Atomic update on pipe (A) took 156 us, max time under evasion is 100 us [ 4146.979884] [drm] Atomic update on pipe (A) took 181 us, max time under evasion is 100 us [ 4149.998932] [drm] Atomic update on pipe (A) took 162 us, max time under evasion is 100 us [ 4153.041043] [drm] Atomic update on pipe (A) took 104 us, max time under evasion is 100 us [ 4188.346708] [drm] Atomic update on pipe (A) took 144 us, max time under evasion is 100 us [ 4194.395677] [drm] Atomic update on pipe (A) took 172 us, max time under evasion is 100 us [ 4196.413470] [drm] Atomic update on pipe (A) took 126 us, max time under evasion is 100 us [ 4198.427217] [drm] Atomic update on pipe (A) took 201 us, max time under evasion is 100 us [ 4212.563055] [drm] Atomic update on pipe (A) took 157 us, max time under evasion is 100 us [ 4222.527930] [drm] Atomic update on pipe (A) took 137 us, max time under evasion is 100 us [ 4235.771176] [drm] Atomic update on pipe (A) took 147 us, max time under evasion is 100 us [ 4241.806874] [drm] Atomic update on pipe (A) took 161 us, max time under evasion is 100 us [ 4250.873103] [drm] Atomic update on pipe (A) took 188 us, max time under evasion is 100 us [ 4260.952170] [drm] Atomic update on pipe (A) took 218 us, max time under evasion is 100 us [ 4268.005441] [drm] Atomic update on pipe (A) took 136 us, max time under evasion is 100 us [ 4281.107501] [drm] Atomic update on pipe (A) took 110 us, max time under evasion is 100 us [ 4286.144772] [drm] Atomic update on pipe (A) took 145 us, max time under evasion is 100 us [ 4315.389532] [drm] Atomic update on pipe (A) took 122 us, max time under evasion is 100 us [ 4330.514113] [drm] Atomic update on pipe (A) took 170 us, max time under evasion is 100 us [ 4331.531528] [drm] Atomic update on pipe (A) took 157 us, max time under evasion is 100 us [ 4336.575326] [drm] Atomic update on pipe (A) took 129 us, max time under evasion is 100 us [ 4368.156961] [drm] Atomic update on pipe (A) took 179 us, max time under evasion is 100 us [ 4415.573859] [drm] Atomic update on pipe (A) took 102 us, max time under evasion is 100 us [ 4422.648857] [drm] Atomic update on pipe (A) took 200 us, max time under evasion is 100 us [ 4468.011418] [drm] Atomic update on pipe (A) took 119 us, max time under evasion is 100 us [ 4495.241840] [drm] Atomic update on pipe (A) took 103 us, max time under evasion is 100 us [ 4498.255383] [drm] Atomic update on pipe (A) took 181 us, max time under evasion is 100 us [ 4499.271915] [drm] Atomic update on pipe (A) took 247 us, max time under evasion is 100 us [ 4514.385647] [drm] Atomic update on pipe (A) took 113 us, max time under evasion is 100 us [ 4528.496980] [drm] Atomic update on pipe (A) took 174 us, max time under evasion is 100 us [ 4535.548157] [drm] Atomic update on pipe (A) took 118 us, max time under evasion is 100 us [ 4559.758803] [drm] Atomic update on pipe (A) took 155 us, max time under evasion is 100 us [ 4561.785689] [drm] Atomic update on pipe (A) took 165 us, max time under evasion is 100 us [ 4574.874167] [drm] Atomic update on pipe (A) took 156 us, max time under evasion is 100 us [ 4575.881585] [drm] Atomic update on pipe (A) took 173 us, max time under evasion is 100 us [ 4578.906740] [drm] Atomic update on pipe (A) took 215 us, max time under evasion is 100 us [ 4613.145905] [drm] Atomic update on pipe (A) took 145 us, max time under evasion is 100 us [ 4631.290969] [drm] Atomic update on pipe (A) took 130 us, max time under evasion is 100 us [ 4643.401101] [drm] Atomic update on pipe (A) took 125 us, max time under evasion is 100 us [ 4655.484603] [drm] Atomic update on pipe (A) took 155 us, max time under evasion is 100 us [ 4662.533124] [drm] Atomic update on pipe (A) took 216 us, max time under evasion is 100 us [ 4665.566350] [drm] Atomic update on pipe (A) took 187 us, max time under evasion is 100 us [ 4678.690452] [drm] Atomic update on pipe (A) took 180 us, max time under evasion is 100 us [ 4692.791517] [drm] Atomic update on pipe (A) took 209 us, max time under evasion is 100 us [ 4696.822145] [drm] Atomic update on pipe (A) took 178 us, max time under evasion is 100 us [ 4701.854373] [drm] Atomic update on pipe (A) took 132 us, max time under evasion is 100 us [ 4706.907326] [drm] Atomic update on pipe (A) took 212 us, max time under evasion is 100 us [ 4711.936126] [drm] Atomic update on pipe (A) took 167 us, max time under evasion is 100 us [ 4714.966392] [drm] Atomic update on pipe (A) took 120 us, max time under evasion is 100 us [ 4716.987053] [drm] Atomic update on pipe (A) took 247 us, max time under evasion is 100 us [ 4722.038026] [drm] Atomic update on pipe (A) took 115 us, max time under evasion is 100 us [ 4723.031855] [drm] Atomic update on pipe (A) took 161 us, max time under evasion is 100 us [ 4733.112550] [drm] Atomic update on pipe (A) took 158 us, max time under evasion is 100 us [ 4737.144842] [drm] Atomic update on pipe (A) took 142 us, max time under evasion is 100 us [ 4750.248604] [drm] Atomic update on pipe (A) took 150 us, max time under evasion is 100 us [ 4756.288421] [drm] Atomic update on pipe (A) took 195 us, max time under evasion is 100 us [ 4760.324586] [drm] Atomic update on pipe (A) took 197 us, max time under evasion is 100 us [ 4765.372236] [drm] Atomic update on pipe (A) took 226 us, max time under evasion is 100 us [ 4766.368625] [drm] Atomic update on pipe (A) took 115 us, max time under evasion is 100 us [ 4769.406988] [drm] Atomic update on pipe (A) took 210 us, max time under evasion is 100 us [ 4833.017830] [drm] Atomic update on pipe (A) took 145 us, max time under evasion is 100 us [ 4836.038785] [drm] Atomic update on pipe (A) took 243 us, max time under evasion is 100 us [ 4836.396926] [drm] Atomic update on pipe (A) took 197 us, max time under evasion is 100 us [ 4849.136425] [drm] Atomic update on pipe (A) took 154 us, max time under evasion is 100 us [ 4860.225262] [drm] Atomic update on pipe (A) took 252 us, max time under evasion is 100 us [ 4861.226669] [drm] Atomic update on pipe (A) took 158 us, max time under evasion is 100 us [ 4881.391459] [drm] Atomic update on pipe (A) took 166 us, max time under evasion is 100 us [ 4888.454110] [drm] Atomic update on pipe (A) took 157 us, max time under evasion is 100 us [ 4891.465796] [drm] Atomic update on pipe (A) took 199 us, max time under evasion is 100 us [ 4894.500615] [drm] Atomic update on pipe (A) took 210 us, max time under evasion is 100 us [ 4899.530940] [drm] Atomic update on pipe (A) took 160 us, max time under evasion is 100 us [ 4900.532485] [drm] Atomic update on pipe (A) took 182 us, max time under evasion is 100 us [ 4905.581366] [drm] Atomic update on pipe (A) took 199 us, max time under evasion is 100 us [ 4909.614045] [drm] Atomic update on pipe (A) took 106 us, max time under evasion is 100 us [ 4910.610866] [drm] Atomic update on pipe (A) took 222 us, max time under evasion is 100 us [ 4917.658453] [drm] Atomic update on pipe (A) took 125 us, max time under evasion is 100 us [ 4921.689357] [drm] Atomic update on pipe (A) took 199 us, max time under evasion is 100 us [ 4949.919372] [drm] Atomic update on pipe (A) took 103 us, max time under evasion is 100 us [ 4951.932130] [drm] Atomic update on pipe (A) took 220 us, max time under evasion is 100 us [ 4954.965087] [drm] Atomic update on pipe (A) took 187 us, max time under evasion is 100 us [ 4955.965741] [drm] Atomic update on pipe (A) took 197 us, max time under evasion is 100 us [ 4966.043731] [drm] Atomic update on pipe (A) took 199 us, max time under evasion is 100 us [ 4970.075665] [drm] Atomic update on pipe (A) took 169 us, max time under evasion is 100 us [ 4974.111769] [drm] Atomic update on pipe (A) took 183 us, max time under evasion is 100 us [ 4980.159129] [drm] Atomic update on pipe (A) took 197 us, max time under evasion is 100 us [ 4990.250078] [drm] Atomic update on pipe (A) took 147 us, max time under evasion is 100 us [ 4994.272627] [drm] Atomic update on pipe (A) took 149 us, max time under evasion is 100 us [ 5010.381997] [drm] Atomic update on pipe (A) took 176 us, max time under evasion is 100 us [ 5012.398501] [drm] Atomic update on pipe (A) took 187 us, max time under evasion is 100 us [ 5016.431599] [drm] Atomic update on pipe (A) took 122 us, max time under evasion is 100 us [ 5030.547587] [drm] Atomic update on pipe (A) took 249 us, max time under evasion is 100 us [ 5038.620652] [drm] Atomic update on pipe (A) took 195 us, max time under evasion is 100 us [ 5048.726638] [drm] Atomic update on pipe (A) took 146 us, max time under evasion is 100 us [ 5049.736654] [drm] Atomic update on pipe (A) took 176 us, max time under evasion is 100 us [ 5050.735377] [drm] Atomic update on pipe (A) took 147 us, max time under evasion is 100 us [ 5054.769608] [drm] Atomic update on pipe (A) took 157 us, max time under evasion is 100 us [ 5058.778631] perf: interrupt took too long (3274 > 3270), lowering kernel.perf_event_max_sample_rate to 61000 [ 5061.849721] [drm] Atomic update on pipe (A) took 114 us, max time under evasion is 100 us [ 5070.012768] [drm] Atomic update on pipe (A) took 141 us, max time under evasion is 100 us [ 5075.061177] [drm] Atomic update on pipe (A) took 120 us, max time under evasion is 100 us [ 5082.129852] [drm] Atomic update on pipe (A) took 171 us, max time under evasion is 100 us [ 5088.175312] [drm] Atomic update on pipe (A) took 229 us, max time under evasion is 100 us [ 5106.319155] [drm] Atomic update on pipe (A) took 162 us, max time under evasion is 100 us [ 5115.406415] [drm] Atomic update on pipe (A) took 374 us, max time under evasion is 100 us [ 5120.431031] [drm] Atomic update on pipe (A) took 196 us, max time under evasion is 100 us [ 5123.468174] [drm] Atomic update on pipe (A) took 133 us, max time under evasion is 100 us [ 5126.508468] [drm] Atomic update on pipe (A) took 126 us, max time under evasion is 100 us [ 5144.642005] [drm] Atomic update on pipe (A) took 174 us, max time under evasion is 100 us [ 5155.737055] [drm] Atomic update on pipe (A) took 197 us, max time under evasion is 100 us [ 5159.788386] [drm] Atomic update on pipe (A) took 106 us, max time under evasion is 100 us [ 5165.833543] [drm] Atomic update on pipe (A) took 211 us, max time under evasion is 100 us [ 5178.965568] [drm] Atomic update on pipe (A) took 259 us, max time under evasion is 100 us [ 5188.050278] [drm] Atomic update on pipe (A) took 183 us, max time under evasion is 100 us [ 5191.078784] [drm] Atomic update on pipe (A) took 127 us, max time under evasion is 100 us [ 5195.108236] [drm] Atomic update on pipe (A) took 120 us, max time under evasion is 100 us [ 5197.132063] [drm] Atomic update on pipe (A) took 123 us, max time under evasion is 100 us [ 5200.158066] [drm] Atomic update on pipe (A) took 123 us, max time under evasion is 100 us [ 5201.156936] [drm] Atomic update on pipe (A) took 176 us, max time under evasion is 100 us [ 5204.189805] [drm] Atomic update on pipe (A) took 148 us, max time under evasion is 100 us [ 5209.243722] [drm] Atomic update on pipe (A) took 156 us, max time under evasion is 100 us [ 5215.270469] [drm] Atomic update on pipe (A) took 190 us, max time under evasion is 100 us [ 5229.382531] [drm] Atomic update on pipe (A) took 236 us, max time under evasion is 100 us [ 5237.464653] [drm] Atomic update on pipe (A) took 137 us, max time under evasion is 100 us [ 5245.544329] [drm] Atomic update on pipe (A) took 156 us, max time under evasion is 100 us [ 5246.543908] [drm] Atomic update on pipe (A) took 161 us, max time under evasion is 100 us [ 5249.574217] [drm] Atomic update on pipe (A) took 176 us, max time under evasion is 100 us [ 5251.585371] [drm] Atomic update on pipe (A) took 116 us, max time under evasion is 100 us [ 5252.595439] [drm] Atomic update on pipe (A) took 213 us, max time under evasion is 100 us [ 5253.608327] [drm] Atomic update on pipe (A) took 133 us, max time under evasion is 100 us [ 5259.666011] [drm] Atomic update on pipe (A) took 167 us, max time under evasion is 100 us [ 5263.688270] [drm] Atomic update on pipe (A) took 181 us, max time under evasion is 100 us [ 5266.724307] [drm] Atomic update on pipe (A) took 149 us, max time under evasion is 100 us [ 5267.720096] [drm] Atomic update on pipe (A) took 184 us, max time under evasion is 100 us [ 5268.739753] [drm] Atomic update on pipe (A) took 219 us, max time under evasion is 100 us [ 5269.736687] [drm] Atomic update on pipe (A) took 176 us, max time under evasion is 100 us [ 5272.769635] [drm] Atomic update on pipe (A) took 155 us, max time under evasion is 100 us [ 5274.802481] [drm] Atomic update on pipe (A) took 168 us, max time under evasion is 100 us [ 5280.849634] [drm] Atomic update on pipe (A) took 209 us, max time under evasion is 100 us [ 5289.946613] [drm] Atomic update on pipe (A) took 162 us, max time under evasion is 100 us [ 5294.997260] [drm] Atomic update on pipe (A) took 173 us, max time under evasion is 100 us [ 5302.063493] [drm] Atomic update on pipe (A) took 177 us, max time under evasion is 100 us [ 5414.974452] [drm] Atomic update on pipe (A) took 202 us, max time under evasion is 100 us [ 5416.999215] [drm] Atomic update on pipe (A) took 202 us, max time under evasion is 100 us [ 5421.014569] [drm] Atomic update on pipe (A) took 145 us, max time under evasion is 100 us [ 5426.064440] [drm] Atomic update on pipe (A) took 184 us, max time under evasion is 100 us [ 5427.066975] [drm] Atomic update on pipe (A) took 125 us, max time under evasion is 100 us [ 5428.078745] [drm] Atomic update on pipe (A) took 184 us, max time under evasion is 100 us [ 5430.088952] [drm] Atomic update on pipe (A) took 155 us, max time under evasion is 100 us [ 5432.107194] [drm] Atomic update on pipe (A) took 171 us, max time under evasion is 100 us [ 5435.145161] [drm] Atomic update on pipe (A) took 180 us, max time under evasion is 100 us [ 5442.495030] [drm] GPU HANG: ecode 6:0:0x001f2124, in chrome [3814], reason: Hang on render ring, action: reset [ 5442.495033] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 5442.495033] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 5442.495034] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 5442.495035] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 5442.495036] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 5442.495080] drm/i915: Resetting chip after gpu hang [ 5450.858950] [drm] Atomic update on pipe (A) took 160 us, max time under evasion is 100 us [ 5451.594543] [drm] Atomic update on pipe (A) took 145 us, max time under evasion is 100 us [ 5462.487433] drm/i915: Resetting chip after gpu hang [ 5463.671431] asynchronous wait on fence i915:[global]:40060 timed out [ 5470.455897] drm/i915: Resetting chip after gpu hang [ 5478.456365] drm/i915: Resetting chip after gpu hang [ 5487.448878] drm/i915: Resetting chip after gpu hang [ 5495.449346] drm/i915: Resetting chip after gpu hang [ 5505.465946] drm/i915: Resetting chip after gpu hang [ 5507.421442] [drm] Atomic update on pipe (A) took 171 us, max time under evasion is 100 us [ 5509.457814] [drm] Atomic update on pipe (A) took 200 us, max time under evasion is 100 us [ 5512.450994] [drm] Atomic update on pipe (A) took 230 us, max time under evasion is 100 us [ 5513.454879] [drm] Atomic update on pipe (A) took 178 us, max time under evasion is 100 us [ 5516.469069] [drm] Atomic update on pipe (A) took 164 us, max time under evasion is 100 us [ 5524.532961] [drm] Atomic update on pipe (A) took 121 us, max time under evasion is 100 us [ 5532.597249] [drm] Atomic update on pipe (A) took 138 us, max time under evasion is 100 us