[309574.919] X.Org X Server 1.19.2 Release Date: 2017-03-02 [309574.919] X Protocol Version 11, Revision 0 [309574.919] Build Operating System: openSUSE SUSE LINUX [309574.920] Current Operating System: Linux linux-qz0r.site 4.10.3-1-default #1 SMP PREEMPT Wed Mar 15 07:47:00 UTC 2017 (0c9f8e4) x86_64 [309574.920] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.3-1-default root=UUID=168ea490-75eb-4c10-8bfc-577f54e380c4 video=1920x1080 resume=/dev/disk/by-id/ata-ST3400620AS_9QH0AFLD-part1 splash=silent quiet showopts [309574.920] Build Date: 10 March 2017 07:48:04PM [309574.920] [309574.920] Current version of pixman: 0.34.0 [309574.920] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [309574.920] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [309574.920] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 21 18:02:58 2017 [309574.920] (==) Using config directory: "/etc/X11/xorg.conf.d" [309574.920] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [309574.920] (==) No Layout section. Using the first Screen section. [309574.920] (==) No screen section available. Using defaults. [309574.920] (**) |-->Screen "Default Screen Section" (0) [309574.920] (**) | |-->Monitor "" [309574.920] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [309574.920] (==) Automatically adding devices [309574.920] (==) Automatically enabling devices [309574.920] (==) Automatically adding GPU devices [309574.920] (==) Max clients allowed: 256, resource mask: 0x1fffff [309574.920] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [309574.920] Entry deleted from font path. [309574.920] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [309574.920] (==) ModulePath set to "/usr/lib64/xorg/modules" [309574.920] (**) Extension "XFree86-DGA" is disabled [309574.920] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [309574.920] (II) Loader magic: 0x825d20 [309574.920] (II) Module ABI versions: [309574.920] X.Org ANSI C Emulation: 0.4 [309574.920] X.Org Video Driver: 23.0 [309574.920] X.Org XInput driver : 24.1 [309574.920] X.Org Server Extension : 10.0 [309574.921] (++) using VT number 7 [309574.921] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [309574.922] (II) xfree86: Adding drm device (/dev/dri/card0) [309574.924] (--) PCI:*(0:3:0:0) 1002:6811:1458:2015 rev 129, Mem @ 0xe0000000/268435456, 0xfb680000/262144, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072 [309574.924] (II) LoadModule: "glx" [309574.924] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [309574.925] (II) Module glx: vendor="X.Org Foundation" [309574.925] compiled for 1.19.2, module version = 1.0.0 [309574.925] ABI class: X.Org Server Extension, version 10.0 [309574.925] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers [309574.925] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers [309574.925] (==) Matched ati as autoconfigured driver 0 [309574.925] (==) Matched ati as autoconfigured driver 1 [309574.925] (==) Matched modesetting as autoconfigured driver 2 [309574.925] (==) Matched fbdev as autoconfigured driver 3 [309574.925] (==) Matched vesa as autoconfigured driver 4 [309574.925] (==) Assigned the driver to the xf86ConfigLayout [309574.925] (II) LoadModule: "ati" [309574.925] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so [309574.925] (II) Module ati: vendor="X.Org Foundation" [309574.925] compiled for 1.19.0, module version = 7.8.0 [309574.925] Module class: X.Org Video Driver [309574.925] ABI class: X.Org Video Driver, version 23.0 [309574.925] (II) LoadModule: "radeon" [309574.925] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so [309574.925] (II) Module radeon: vendor="X.Org Foundation" [309574.925] compiled for 1.19.0, module version = 7.8.0 [309574.925] Module class: X.Org Video Driver [309574.925] ABI class: X.Org Video Driver, version 23.0 [309574.925] (II) LoadModule: "modesetting" [309574.925] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [309574.925] (II) Module modesetting: vendor="X.Org Foundation" [309574.925] compiled for 1.19.2, module version = 1.19.2 [309574.925] Module class: X.Org Video Driver [309574.925] ABI class: X.Org Video Driver, version 23.0 [309574.925] (II) LoadModule: "fbdev" [309574.925] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [309574.925] (II) Module fbdev: vendor="X.Org Foundation" [309574.925] compiled for 1.19.0, module version = 0.4.4 [309574.925] Module class: X.Org Video Driver [309574.925] ABI class: X.Org Video Driver, version 23.0 [309574.925] (II) LoadModule: "vesa" [309574.926] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [309574.926] (II) Module vesa: vendor="X.Org Foundation" [309574.926] compiled for 1.19.0, module version = 2.3.4 [309574.926] Module class: X.Org Video Driver [309574.926] ABI class: X.Org Video Driver, version 23.0 [309574.926] (II) RADEON: Driver for ATI/AMD Radeon chipsets: ATI Radeon Mobility X600 (M24), ATI FireMV 2400, ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL, ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380), ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4), ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE, ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE, ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360, ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW, ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2), ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000, ATI Radeon X800 (R420), ATI Radeon X800PRO (R420), ATI Radeon X800SE (R420), ATI FireGL X3 (R420), ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420), ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420), ATI Radeon X850 (R480), ATI Radeon X850 XT (R480), ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480), ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7, ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6, ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9), ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1, ATI Radeon 9800PRO, ATI Radeon 9800XT, ATI Radeon Mobility 9600/9700 (M10/M11), ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11), ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11), ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100, ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000, ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C), ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423), ATI Radeon X800LE (R423), ATI Radeon X800SE (R423), ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430), ATI Radeon X800 SE (R430), ATI Radeon X800 (R430), ATI FireGL V7100 (R423), ATI FireGL V5100 (R423), ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26), ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26), ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5), ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200, ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200, ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370), ATI Radeon X600 (RV370), ATI Radeon X550 (RV370), ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370), ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28), ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28), ATI Radeon X850, ATI unknown Radeon / FireGL (R480), ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410), ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410), ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300, ATI FireGL V3350, ATI Mobility Radeon X1450, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor, ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570, ATI FireGL V7400, ATI Radeon 9100 PRO IGP, ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700, ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics, AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS, ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370, AMD Firestream 9350, ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270, ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS, AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS, ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI, MULLINS, KAVERI, HAWAII [309574.927] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [309574.927] (II) FBDEV: driver for framebuffer: fbdev [309574.927] (II) VESA: driver for VESA chipsets: vesa [309574.927] (II) [KMS] Kernel modesetting enabled. [309574.927] (WW) Falling back to old probe method for modesetting [309574.927] (WW) Falling back to old probe method for fbdev [309574.927] (II) Loading sub module "fbdevhw" [309574.927] (II) LoadModule: "fbdevhw" [309574.927] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [309574.927] (II) Module fbdevhw: vendor="X.Org Foundation" [309574.927] compiled for 1.19.2, module version = 0.0.2 [309574.927] ABI class: X.Org Video Driver, version 23.0 [309574.927] (WW) Falling back to old probe method for vesa [309574.927] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [309574.927] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [309574.927] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [309574.927] (==) RADEON(0): Default visual is TrueColor [309574.927] (==) RADEON(0): RGB weight 888 [309574.927] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [309574.927] (--) RADEON(0): Chipset: "PITCAIRN" (ChipID = 0x6811) [309574.928] (II) Loading sub module "fb" [309574.928] (II) LoadModule: "fb" [309574.928] (II) Loading /usr/lib64/xorg/modules/libfb.so [309574.928] (II) Module fb: vendor="X.Org Foundation" [309574.928] compiled for 1.19.2, module version = 1.0.0 [309574.928] ABI class: X.Org ANSI C Emulation, version 0.4 [309574.928] (II) Loading sub module "dri2" [309574.928] (II) LoadModule: "dri2" [309574.928] (II) Module "dri2" already built-in [309574.928] (II) Loading sub module "glamoregl" [309574.928] (II) LoadModule: "glamoregl" [309574.928] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [309574.931] (II) Module glamoregl: vendor="X.Org Foundation" [309574.932] compiled for 1.19.2, module version = 1.0.0 [309574.932] ABI class: X.Org ANSI C Emulation, version 0.4 [309574.932] (II) glamor: OpenGL accelerated X.org driver based. [309574.982] (II) glamor: EGL version 1.4 (DRI2): [309574.983] (II) RADEON(0): glamor detected, initialising EGL layer. [309574.983] (II) RADEON(0): KMS Color Tiling: enabled [309574.983] (II) RADEON(0): KMS Color Tiling 2D: enabled [309574.983] (II) RADEON(0): KMS Pageflipping: enabled [309574.983] (II) RADEON(0): SwapBuffers wait for vsync: enabled [309575.011] (II) RADEON(0): Output DisplayPort-0 has no monitor section [309575.013] (II) RADEON(0): Output HDMI-0 has no monitor section [309575.044] (II) RADEON(0): Output DVI-0 has no monitor section [309575.046] (II) RADEON(0): Output DVI-1 has no monitor section [309575.075] (II) RADEON(0): EDID for output DisplayPort-0 [309575.076] (II) RADEON(0): EDID for output HDMI-0 [309575.108] (II) RADEON(0): EDID for output DVI-0 [309575.108] (II) RADEON(0): Manufacturer: GSM Model: 59de Serial#: 537818 [309575.108] (II) RADEON(0): Year: 2013 Week: 9 [309575.108] (II) RADEON(0): EDID Version: 1.3 [309575.108] (II) RADEON(0): Digital Display Input [309575.108] (II) RADEON(0): Max Image Size [cm]: horiz.: 51 vert.: 29 [309575.108] (II) RADEON(0): Gamma: 2.20 [309575.108] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off [309575.108] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [309575.108] (II) RADEON(0): First detailed timing is preferred mode [309575.108] (II) RADEON(0): redX: 0.638 redY: 0.334 greenX: 0.309 greenY: 0.627 [309575.108] (II) RADEON(0): blueX: 0.153 blueY: 0.073 whiteX: 0.313 whiteY: 0.329 [309575.108] (II) RADEON(0): Supported established timings: [309575.109] (II) RADEON(0): 720x400@70Hz [309575.109] (II) RADEON(0): 640x480@60Hz [309575.109] (II) RADEON(0): 640x480@75Hz [309575.109] (II) RADEON(0): 800x600@56Hz [309575.109] (II) RADEON(0): 800x600@60Hz [309575.109] (II) RADEON(0): 800x600@75Hz [309575.109] (II) RADEON(0): 832x624@75Hz [309575.109] (II) RADEON(0): 1024x768@60Hz [309575.109] (II) RADEON(0): 1024x768@75Hz [309575.109] (II) RADEON(0): 1280x1024@75Hz [309575.109] (II) RADEON(0): 1152x864@75Hz [309575.109] (II) RADEON(0): Manufacturer's mask: 0 [309575.109] (II) RADEON(0): Supported standard timings: [309575.109] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [309575.109] (II) RADEON(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [309575.109] (II) RADEON(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129 [309575.109] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [309575.109] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149 [309575.109] (II) RADEON(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528 [309575.109] (II) RADEON(0): #6: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [309575.109] (II) RADEON(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [309575.109] (II) RADEON(0): Supported detailed timing: [309575.109] (II) RADEON(0): clock: 148.5 MHz Image Size: 510 x 290 mm [309575.109] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [309575.109] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [309575.109] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz [309575.109] (II) RADEON(0): Monitor name: 24EN43 [309575.109] (II) RADEON(0): Serial No: 309NDXQFT818 [309575.109] (II) RADEON(0): EDID (in hex): [309575.109] (II) RADEON(0): 00ffffffffffff001e6dde59da340800 [309575.109] (II) RADEON(0): 0917010380331d78ea6275a3554fa027 [309575.109] (II) RADEON(0): 125054a76b80714f81c0810081809500 [309575.109] (II) RADEON(0): 9040a9c0b300023a801871382d40582c [309575.109] (II) RADEON(0): 4500fe221100001e000000fd00384b1e [309575.109] (II) RADEON(0): 530f000a202020202020000000fc0032 [309575.109] (II) RADEON(0): 34454e34330a202020202020000000ff [309575.109] (II) RADEON(0): 003330394e44585146543831380a009a [309575.109] (II) RADEON(0): Printing probed modes for output DVI-0 [309575.109] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [309575.109] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [309575.109] (II) RADEON(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [309575.109] (II) RADEON(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) [309575.109] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [309575.109] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [309575.109] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [309575.109] (II) RADEON(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [309575.109] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [309575.109] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [309575.109] (II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [309575.109] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [309575.109] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [309575.109] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [309575.109] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [309575.109] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [309575.109] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [309575.109] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [309575.109] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [309575.110] (II) RADEON(0): EDID for output DVI-1 [309575.110] (II) RADEON(0): Output DisplayPort-0 disconnected [309575.110] (II) RADEON(0): Output HDMI-0 disconnected [309575.110] (II) RADEON(0): Output DVI-0 connected [309575.110] (II) RADEON(0): Output DVI-1 disconnected [309575.110] (II) RADEON(0): Using exact sizes for initial modes [309575.110] (II) RADEON(0): Output DVI-0 using initial mode 1920x1080 +0+0 [309575.110] (II) RADEON(0): mem size init: gart size :7fbcc000 vram size: s:80000000 visible:d8ef000 [309575.110] (==) RADEON(0): DPI set to (96, 96) [309575.110] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) [309575.110] (II) Loading sub module "ramdac" [309575.110] (II) LoadModule: "ramdac" [309575.110] (II) Module "ramdac" already built-in [309575.110] (II) UnloadModule: "modesetting" [309575.110] (II) Unloading modesetting [309575.110] (II) UnloadModule: "fbdev" [309575.110] (II) Unloading fbdev [309575.110] (II) UnloadSubModule: "fbdevhw" [309575.110] (II) Unloading fbdevhw [309575.110] (II) UnloadModule: "vesa" [309575.110] (II) Unloading vesa [309575.110] (--) Depth 24 pixmap format is 32 bpp [309575.110] (II) RADEON(0): [DRI2] Setup complete [309575.110] (II) RADEON(0): [DRI2] DRI driver: radeonsi [309575.110] (II) RADEON(0): [DRI2] VDPAU driver: radeonsi [309575.110] (II) RADEON(0): Front buffer size: 8640K [309575.110] (II) RADEON(0): VRAM usage limit set to 192063K [309575.110] (II) RADEON(0): SYNC extension fences enabled [309575.110] (II) RADEON(0): Present extension enabled [309575.110] (==) RADEON(0): DRI3 enabled [309575.110] (==) RADEON(0): Backing store enabled [309575.110] (II) RADEON(0): Direct rendering enabled [309575.200] (II) RADEON(0): Use GLAMOR acceleration. [309575.200] (II) RADEON(0): Acceleration enabled [309575.200] (==) RADEON(0): DPMS enabled [309575.200] (==) RADEON(0): Silken mouse enabled [309575.200] (II) RADEON(0): Set up textured video (glamor) [309575.200] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video. [309575.200] (II) RADEON(0): [XvMC] Extension initialized. [309575.200] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. [309575.200] (--) RandR disabled [309575.204] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [309575.204] (II) AIGLX: enabled GLX_ARB_create_context [309575.204] (II) AIGLX: enabled GLX_ARB_create_context_profile [309575.204] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [309575.204] (II) AIGLX: enabled GLX_INTEL_swap_event [309575.204] (II) AIGLX: enabled GLX_SGI_swap_control [309575.204] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [309575.204] (II) AIGLX: enabled GLX_ARB_fbconfig_float [309575.204] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [309575.204] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [309575.204] (II) AIGLX: enabled GLX_ARB_create_context_robustness [309575.205] (II) AIGLX: Loaded and initialized radeonsi [309575.205] (II) GLX: Initialized DRI2 GL provider for screen 0 [309575.213] (II) RADEON(0): Setting screen physical size to 508 x 285 [309575.284] (II) config/udev: Adding input device Power Button (/dev/input/event7) [309575.284] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309575.284] (**) Power Button: Applying InputClass "system-keyboard" [309575.284] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309575.284] (**) Power Button: Applying InputClass "libinput keyboard catchall" [309575.284] (II) LoadModule: "libinput" [309575.284] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [309575.285] (II) Module libinput: vendor="X.Org Foundation" [309575.285] compiled for 1.19.2, module version = 0.25.0 [309575.285] Module class: X.Org XInput Driver [309575.285] ABI class: X.Org XInput driver, version 24.1 [309575.286] (II) Using input driver 'libinput' for 'Power Button' [309575.286] (**) Power Button: always reports core events [309575.286] (**) Option "Device" "/dev/input/event7" [309575.286] (**) Option "_source" "server/udev" [309575.286] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard [309575.286] (II) input device 'Power Button', /dev/input/event7 is a keyboard [309575.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event7" [309575.304] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [309575.304] (**) Option "xkb_layout" "us" [309575.304] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard [309575.304] (II) input device 'Power Button', /dev/input/event7 is a keyboard [309575.304] (II) config/udev: Adding input device Power Button (/dev/input/event6) [309575.304] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309575.304] (**) Power Button: Applying InputClass "system-keyboard" [309575.304] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309575.304] (**) Power Button: Applying InputClass "libinput keyboard catchall" [309575.304] (II) Using input driver 'libinput' for 'Power Button' [309575.304] (**) Power Button: always reports core events [309575.304] (**) Option "Device" "/dev/input/event6" [309575.304] (**) Option "_source" "server/udev" [309575.305] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard [309575.305] (II) input device 'Power Button', /dev/input/event6 is a keyboard [309575.328] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event6" [309575.328] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [309575.328] (**) Option "xkb_layout" "us" [309575.328] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard [309575.328] (II) input device 'Power Button', /dev/input/event6 is a keyboard [309575.328] (II) config/udev: Adding input device Microsoft® LifeCam HD-5000 (/dev/input/event23) [309575.328] (**) Microsoft® LifeCam HD-5000: Applying InputClass "evdev keyboard catchall" [309575.328] (**) Microsoft® LifeCam HD-5000: Applying InputClass "system-keyboard" [309575.328] (**) Microsoft® LifeCam HD-5000: Applying InputClass "evdev keyboard catchall" [309575.328] (**) Microsoft® LifeCam HD-5000: Applying InputClass "libinput keyboard catchall" [309575.328] (II) Using input driver 'libinput' for 'Microsoft® LifeCam HD-5000' [309575.328] (**) Microsoft® LifeCam HD-5000: always reports core events [309575.328] (**) Option "Device" "/dev/input/event23" [309575.328] (**) Option "_source" "server/udev" [309575.329] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is tagged by udev as: Keyboard [309575.329] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is a keyboard [309575.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input29/event23" [309575.368] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-5000" (type: KEYBOARD, id 8) [309575.368] (**) Option "xkb_layout" "us" [309575.368] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is tagged by udev as: Keyboard [309575.368] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is a keyboard [309575.368] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8) [309575.368] (II) No input driver specified, ignoring this device. [309575.368] (II) This device may have been added with another device file. [309575.369] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event9) [309575.369] (II) No input driver specified, ignoring this device. [309575.369] (II) This device may have been added with another device file. [309575.369] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event10) [309575.369] (II) No input driver specified, ignoring this device. [309575.369] (II) This device may have been added with another device file. [309575.369] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event11) [309575.369] (II) No input driver specified, ignoring this device. [309575.369] (II) This device may have been added with another device file. [309575.369] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event12) [309575.369] (II) No input driver specified, ignoring this device. [309575.369] (II) This device may have been added with another device file. [309575.369] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event13) [309575.369] (II) No input driver specified, ignoring this device. [309575.369] (II) This device may have been added with another device file. [309575.370] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/event0) [309575.370] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "evdev tablet catchall" [309575.370] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "evdev tablet catchall" [309575.370] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "libinput tablet catchall" [309575.370] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "Wacom USB tablet class" [309575.370] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "Wacom tablet class" [309575.370] (II) LoadModule: "wacom" [309575.370] (II) Loading /usr/lib64/xorg/modules/input/wacom_drv.so [309575.370] (II) Module wacom: vendor="X.Org Foundation" [309575.370] compiled for 1.19.0, module version = 0.32.0 [309575.370] Module class: X.Org XInput Driver [309575.370] ABI class: X.Org XInput driver, version 24.1 [309575.370] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire, Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8, Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8, Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660, CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L, CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12, Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800, PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931, DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9, Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint, Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M, Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M, Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001, usb:17ef:6004 [309575.371] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen' [309575.371] (**) Wacom Bamboo 2FG 4x5 Pen: always reports core events [309575.371] (**) Option "Device" "/dev/input/event0" [309575.428] (II) Wacom Bamboo 2FG 4x5 Pen: type not specified, assuming 'stylus'. [309575.428] (II) Wacom Bamboo 2FG 4x5 Pen: other types will be automatically added. [309575.428] (--) Wacom Bamboo 2FG 4x5 Pen stylus: using pressure threshold of 27 for button 1 [309575.428] (--) Wacom Bamboo 2FG 4x5 Pen stylus: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled [309575.428] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging dependent devices. [309575.428] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'cursor' for this device. [309575.428] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'touch' for this device. [309575.428] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'pad' for this device. [309575.428] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging completed. [309575.468] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.0/0003:056A:00D1.0004/input/input3/event0" [309575.468] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen stylus" (type: STYLUS, id 9) [309575.468] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) keeping acceleration scheme 1 [309575.468] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration profile 0 [309575.468] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration factor: 2.000 [309575.468] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration threshold: 4 [309575.528] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/mouse0) [309575.528] (II) No input driver specified, ignoring this device. [309575.528] (II) This device may have been added with another device file. [309575.528] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Finger (/dev/input/event1) [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "evdev touchpad catchall" [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "evdev touchpad catchall" [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "libinput touchpad catchall" [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "touchpad catchall" [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Default clickpad buttons" [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Wacom USB touchpad class" [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Wacom touchpad class" [309575.528] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Finger' [309575.528] (**) Wacom Bamboo 2FG 4x5 Finger: always reports core events [309575.528] (**) Option "Device" "/dev/input/event1" [309575.588] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'stylus' for this device. [309575.588] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'eraser' for this device. [309575.588] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'cursor' for this device. [309575.588] (II) Wacom Bamboo 2FG 4x5 Finger: type not specified, assuming 'touch'. [309575.588] (II) Wacom Bamboo 2FG 4x5 Finger: other types will be automatically added. [309575.588] (--) Wacom Bamboo 2FG 4x5 Finger touch: maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000 [309575.588] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging dependent devices. [309575.588] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'stylus' for this device. [309575.588] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'eraser' for this device. [309575.588] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'cursor' for this device. [309575.588] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'pad' for this device. [309575.588] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging completed. [309575.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.1/0003:056A:00D1.0005/input/input7/event1" [309575.640] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Finger touch" (type: TOUCH, id 10) [309575.640] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) keeping acceleration scheme 1 [309575.640] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration profile 0 [309575.640] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration factor: 2.000 [309575.640] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration threshold: 4 [309575.700] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Finger (/dev/input/mouse1) [309575.700] (**) Wacom Bamboo 2FG 4x5 Finger: Ignoring device from InputClass "touchpad ignore duplicates" [309575.700] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/event2) [309575.700] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "evdev tablet catchall" [309575.700] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "evdev tablet catchall" [309575.700] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "libinput tablet catchall" [309575.700] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "Wacom USB tablet class" [309575.700] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "Wacom tablet class" [309575.700] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pad' [309575.700] (**) Wacom Bamboo 2FG 4x5 Pad: always reports core events [309575.700] (**) Option "Device" "/dev/input/event2" [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'stylus' for this device. [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'eraser' for this device. [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'cursor' for this device. [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'touch' for this device. [309575.700] (II) Wacom Bamboo 2FG 4x5 Pad: type not specified, assuming 'pad'. [309575.700] (II) Wacom Bamboo 2FG 4x5 Pad: other types will be automatically added. [309575.700] (II) Wacom Bamboo 2FG 4x5 Pad pad: hotplugging dependent devices. [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'stylus' for this device. [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'eraser' for this device. [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'cursor' for this device. [309575.700] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'touch' for this device. [309575.700] (II) Wacom Bamboo 2FG 4x5 Pad pad: hotplugging completed. [309575.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.1/0003:056A:00D1.0005/input/input8/event2" [309575.732] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pad pad" (type: PAD, id 11) [309575.732] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) keeping acceleration scheme 1 [309575.732] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration profile 0 [309575.732] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration factor: 2.000 [309575.732] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration threshold: 4 [309575.732] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/js0) [309575.732] (II) No input driver specified, ignoring this device. [309575.732] (II) This device may have been added with another device file. [309575.732] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/mouse2) [309575.732] (II) No input driver specified, ignoring this device. [309575.732] (II) This device may have been added with another device file. [309575.733] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event15) [309575.733] (II) No input driver specified, ignoring this device. [309575.733] (II) This device may have been added with another device file. [309575.733] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event16) [309575.733] (II) No input driver specified, ignoring this device. [309575.733] (II) This device may have been added with another device file. [309575.733] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event17) [309575.733] (II) No input driver specified, ignoring this device. [309575.733] (II) This device may have been added with another device file. [309575.733] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event18) [309575.733] (II) No input driver specified, ignoring this device. [309575.733] (II) This device may have been added with another device file. [309575.733] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event19) [309575.733] (II) No input driver specified, ignoring this device. [309575.733] (II) This device may have been added with another device file. [309575.734] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event20) [309575.734] (II) No input driver specified, ignoring this device. [309575.734] (II) This device may have been added with another device file. [309575.734] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event21) [309575.734] (II) No input driver specified, ignoring this device. [309575.734] (II) This device may have been added with another device file. [309575.734] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event22) [309575.734] (II) No input driver specified, ignoring this device. [309575.734] (II) This device may have been added with another device file. [309575.734] (II) config/udev: Adding input device Logitech M705 (/dev/input/event3) [309575.734] (**) Logitech M705: Applying InputClass "evdev pointer catchall" [309575.734] (**) Logitech M705: Applying InputClass "evdev pointer catchall" [309575.734] (**) Logitech M705: Applying InputClass "libinput pointer catchall" [309575.734] (II) Using input driver 'libinput' for 'Logitech M705' [309575.734] (**) Logitech M705: always reports core events [309575.734] (**) Option "Device" "/dev/input/event3" [309575.734] (**) Option "_source" "server/udev" [309575.735] (II) input device 'Logitech M705', /dev/input/event3 is tagged by udev as: Mouse [309575.735] (II) Device 'Logitech M705' set to 800 DPI [309575.735] (II) input device 'Logitech M705', /dev/input/event3 is a pointer caps [309575.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0006/input/input9/event3" [309575.768] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 12) [309575.768] (**) Option "AccelerationScheme" "none" [309575.768] (**) Logitech M705: (accel) selected scheme none/0 [309575.768] (**) Logitech M705: (accel) acceleration factor: 2.000 [309575.768] (**) Logitech M705: (accel) acceleration threshold: 4 [309575.768] (II) input device 'Logitech M705', /dev/input/event3 is tagged by udev as: Mouse [309575.768] (II) Device 'Logitech M705' set to 800 DPI [309575.768] (II) input device 'Logitech M705', /dev/input/event3 is a pointer caps [309575.768] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse3) [309575.769] (II) No input driver specified, ignoring this device. [309575.769] (II) This device may have been added with another device file. [309575.769] (II) config/udev: Adding input device Logitech MK700 (/dev/input/event5) [309575.769] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309575.769] (**) Logitech MK700: Applying InputClass "system-keyboard" [309575.769] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309575.769] (**) Logitech MK700: Applying InputClass "libinput keyboard catchall" [309575.769] (II) Using input driver 'libinput' for 'Logitech MK700' [309575.769] (**) Logitech MK700: always reports core events [309575.769] (**) Option "Device" "/dev/input/event5" [309575.769] (**) Option "_source" "server/udev" [309575.769] (II) input device 'Logitech MK700', /dev/input/event5 is tagged by udev as: Keyboard [309575.769] (II) input device 'Logitech MK700', /dev/input/event5 is a keyboard [309575.800] (II) libinput: Logitech MK700: needs a virtual subdevice [309575.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:2008.0007/input/input11/event5" [309575.800] (II) XINPUT: Adding extended input device "Logitech MK700" (type: MOUSE, id 13) [309575.800] (**) Option "AccelerationScheme" "none" [309575.800] (**) Logitech MK700: (accel) selected scheme none/0 [309575.800] (**) Logitech MK700: (accel) acceleration factor: 2.000 [309575.800] (**) Logitech MK700: (accel) acceleration threshold: 4 [309575.800] (II) input device 'Logitech MK700', /dev/input/event5 is tagged by udev as: Keyboard [309575.800] (II) input device 'Logitech MK700', /dev/input/event5 is a keyboard [309575.800] (II) config/udev: Adding input device Logitech Logitech Wireless Headset (/dev/input/event4) [309575.800] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [309575.800] (**) Logitech Logitech Wireless Headset: Applying InputClass "system-keyboard" [309575.800] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [309575.800] (**) Logitech Logitech Wireless Headset: Applying InputClass "libinput keyboard catchall" [309575.800] (II) Using input driver 'libinput' for 'Logitech Logitech Wireless Headset' [309575.801] (**) Logitech Logitech Wireless Headset: always reports core events [309575.801] (**) Option "Device" "/dev/input/event4" [309575.801] (**) Option "_source" "server/udev" [309575.801] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is tagged by udev as: Keyboard [309575.801] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is a keyboard [309575.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-2/8-2:1.3/0003:046D:0A29.0008/input/input10/event4" [309575.840] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 14) [309575.840] (**) Option "xkb_layout" "us" [309575.840] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is tagged by udev as: Keyboard [309575.840] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is a keyboard [309575.840] (II) config/udev: Adding input device PC Speaker (/dev/input/event14) [309575.840] (II) No input driver specified, ignoring this device. [309575.840] (II) This device may have been added with another device file. [309575.844] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "evdev tablet catchall" [309575.844] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "evdev tablet catchall" [309575.844] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "libinput tablet catchall" [309575.844] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "Wacom USB tablet class" [309575.844] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "Wacom tablet class" [309575.844] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen eraser' [309575.844] (**) Wacom Bamboo 2FG 4x5 Pen eraser: always reports core events [309575.844] (**) Option "Device" "/dev/input/event0" [309575.844] (**) Option "Type" "eraser" [309575.844] (--) Wacom Bamboo 2FG 4x5 Pen eraser: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled [309575.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.0/0003:056A:00D1.0004/input/input3/event0" [309575.876] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen eraser" (type: ERASER, id 15) [309575.876] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) keeping acceleration scheme 1 [309575.876] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration profile 0 [309575.876] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration factor: 2.000 [309575.876] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration threshold: 4 [309575.876] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309575.876] (**) Logitech MK700: Applying InputClass "system-keyboard" [309575.876] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309575.876] (**) Logitech MK700: Applying InputClass "libinput keyboard catchall" [309575.876] (II) Using input driver 'libinput' for 'Logitech MK700' [309575.876] (**) Logitech MK700: always reports core events [309575.876] (**) Option "Device" "/dev/input/event5" [309575.876] (**) Option "_source" "_driver/libinput" [309575.876] (II) libinput: Logitech MK700: is a virtual subdevice [309575.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:2008.0007/input/input11/event5" [309575.876] (II) XINPUT: Adding extended input device "Logitech MK700" (type: KEYBOARD, id 16) [309575.876] (**) Option "xkb_layout" "us" [309591.301] (II) RADEON(0): EDID vendor "GSM", prod id 23006 [309591.301] (II) RADEON(0): Using EDID range info for horizontal sync [309591.301] (II) RADEON(0): Using EDID range info for vertical refresh [309591.301] (II) RADEON(0): Printing DDC gathered Modelines: [309591.301] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [309591.301] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [309591.301] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [309591.301] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [309591.301] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [309591.301] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [309591.301] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [309591.301] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [309591.301] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [309591.301] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [309591.301] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [309591.301] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [309591.302] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [309591.302] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [309591.302] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [309591.302] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [309591.302] (II) RADEON(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [309591.302] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [309591.302] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [309594.991] (II) RADEON(0): EDID vendor "GSM", prod id 23006 [309594.991] (II) RADEON(0): Using hsync ranges from config file [309594.991] (II) RADEON(0): Using vrefresh ranges from config file [309594.992] (II) RADEON(0): Printing DDC gathered Modelines: [309594.992] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [309594.992] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [309594.992] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [309594.992] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [309594.992] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [309594.992] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [309594.992] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [309594.992] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [309594.992] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [309594.992] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [309594.992] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [309594.992] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [309594.992] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [309594.992] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [309594.992] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [309594.992] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [309594.992] (II) RADEON(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [309594.992] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [309594.992] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [309595.392] (II) RADEON(0): EDID vendor "GSM", prod id 23006 [309595.392] (II) RADEON(0): Using hsync ranges from config file [309595.392] (II) RADEON(0): Using vrefresh ranges from config file [309595.392] (II) RADEON(0): Printing DDC gathered Modelines: [309595.392] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [309595.392] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [309595.392] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [309595.392] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [309595.392] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [309595.392] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [309595.392] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [309595.392] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [309595.392] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [309595.392] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [309595.392] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [309595.392] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [309595.392] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [309595.392] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [309595.392] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [309595.392] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [309595.392] (II) RADEON(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [309595.392] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [309595.392] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [309631.369] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/mouse0) [309631.369] (II) No input driver specified, ignoring this device. [309631.369] (II) This device may have been added with another device file. [309631.371] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/js0) [309631.371] (II) No input driver specified, ignoring this device. [309631.371] (II) This device may have been added with another device file. [309631.372] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Finger (/dev/input/mouse1) [309631.372] (**) Wacom Bamboo 2FG 4x5 Finger: Ignoring device from InputClass "touchpad ignore duplicates" [309631.376] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/mouse2) [309631.376] (II) No input driver specified, ignoring this device. [309631.376] (II) This device may have been added with another device file. [309631.379] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse3) [309631.379] (II) No input driver specified, ignoring this device. [309631.379] (II) This device may have been added with another device file. [309631.456] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8) [309631.456] (II) No input driver specified, ignoring this device. [309631.456] (II) This device may have been added with another device file. [309631.456] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event10) [309631.456] (II) No input driver specified, ignoring this device. [309631.456] (II) This device may have been added with another device file. [309631.456] (II) config/udev: removing device Logitech MK700 [309631.457] (II) UnloadModule: "libinput" [309631.457] (II) config/udev: removing device Logitech MK700 [309631.484] (II) UnloadModule: "libinput" [309631.484] (II) config/udev: Adding input device Logitech MK700 (/dev/input/event5) [309631.484] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309631.485] (**) Logitech MK700: Applying InputClass "system-keyboard" [309631.485] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309631.485] (**) Logitech MK700: Applying InputClass "libinput keyboard catchall" [309631.485] (II) Using input driver 'libinput' for 'Logitech MK700' [309631.485] (**) Logitech MK700: always reports core events [309631.485] (**) Option "Device" "/dev/input/event5" [309631.485] (**) Option "_source" "server/udev" [309631.509] (II) input device 'Logitech MK700', /dev/input/event5 is tagged by udev as: Keyboard [309631.509] (II) input device 'Logitech MK700', /dev/input/event5 is a keyboard [309631.548] (II) libinput: Logitech MK700: needs a virtual subdevice [309631.548] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:2008.0007/input/input11/event5" [309631.548] (II) XINPUT: Adding extended input device "Logitech MK700" (type: MOUSE, id 13) [309631.548] (**) Option "AccelerationScheme" "none" [309631.548] (**) Logitech MK700: (accel) selected scheme none/0 [309631.548] (**) Logitech MK700: (accel) acceleration factor: 2.000 [309631.548] (**) Logitech MK700: (accel) acceleration threshold: 4 [309631.548] (II) input device 'Logitech MK700', /dev/input/event5 is tagged by udev as: Keyboard [309631.548] (II) input device 'Logitech MK700', /dev/input/event5 is a keyboard [309631.549] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309631.549] (**) Logitech MK700: Applying InputClass "system-keyboard" [309631.549] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309631.549] (**) Logitech MK700: Applying InputClass "libinput keyboard catchall" [309631.549] (II) Using input driver 'libinput' for 'Logitech MK700' [309631.549] (**) Logitech MK700: always reports core events [309631.549] (**) Option "Device" "/dev/input/event5" [309631.549] (**) Option "_source" "_driver/libinput" [309631.549] (II) libinput: Logitech MK700: is a virtual subdevice [309631.549] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:2008.0007/input/input11/event5" [309631.549] (II) XINPUT: Adding extended input device "Logitech MK700" (type: KEYBOARD, id 16) [309631.549] (**) Option "xkb_layout" "us" [309631.549] (II) config/udev: removing device Power Button [309631.568] (II) UnloadModule: "libinput" [309631.568] (II) config/udev: Adding input device Power Button (/dev/input/event6) [309631.568] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309631.568] (**) Power Button: Applying InputClass "system-keyboard" [309631.568] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309631.568] (**) Power Button: Applying InputClass "libinput keyboard catchall" [309631.568] (II) Using input driver 'libinput' for 'Power Button' [309631.568] (**) Power Button: always reports core events [309631.568] (**) Option "Device" "/dev/input/event6" [309631.568] (**) Option "_source" "server/udev" [309631.568] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard [309631.568] (II) input device 'Power Button', /dev/input/event6 is a keyboard [309631.588] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event6" [309631.588] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [309631.588] (**) Option "xkb_layout" "us" [309631.588] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard [309631.588] (II) input device 'Power Button', /dev/input/event6 is a keyboard [309631.589] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event21) [309631.589] (II) No input driver specified, ignoring this device. [309631.589] (II) This device may have been added with another device file. [309631.589] (II) config/udev: Adding input device PC Speaker (/dev/input/event14) [309631.589] (II) No input driver specified, ignoring this device. [309631.589] (II) This device may have been added with another device file. [309631.589] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event13) [309631.589] (II) No input driver specified, ignoring this device. [309631.589] (II) This device may have been added with another device file. [309631.589] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event16) [309631.589] (II) No input driver specified, ignoring this device. [309631.589] (II) This device may have been added with another device file. [309631.589] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event12) [309631.589] (II) No input driver specified, ignoring this device. [309631.589] (II) This device may have been added with another device file. [309631.589] (II) config/udev: removing device Logitech M705 [309631.632] (II) UnloadModule: "libinput" [309631.633] (II) config/udev: Adding input device Logitech M705 (/dev/input/event3) [309631.633] (**) Logitech M705: Applying InputClass "evdev pointer catchall" [309631.633] (**) Logitech M705: Applying InputClass "evdev pointer catchall" [309631.633] (**) Logitech M705: Applying InputClass "libinput pointer catchall" [309631.633] (II) Using input driver 'libinput' for 'Logitech M705' [309631.633] (**) Logitech M705: always reports core events [309631.633] (**) Option "Device" "/dev/input/event3" [309631.633] (**) Option "_source" "server/udev" [309631.633] (II) input device 'Logitech M705', /dev/input/event3 is tagged by udev as: Mouse [309631.633] (II) Device 'Logitech M705' set to 800 DPI [309631.633] (II) input device 'Logitech M705', /dev/input/event3 is a pointer caps [309631.668] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0006/input/input9/event3" [309631.668] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 12) [309631.668] (**) Option "AccelerationScheme" "none" [309631.668] (**) Logitech M705: (accel) selected scheme none/0 [309631.668] (**) Logitech M705: (accel) acceleration factor: 2.000 [309631.668] (**) Logitech M705: (accel) acceleration threshold: 4 [309631.668] (II) input device 'Logitech M705', /dev/input/event3 is tagged by udev as: Mouse [309631.668] (II) Device 'Logitech M705' set to 800 DPI [309631.668] (II) input device 'Logitech M705', /dev/input/event3 is a pointer caps [309631.669] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event11) [309631.669] (II) No input driver specified, ignoring this device. [309631.669] (II) This device may have been added with another device file. [309631.669] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event17) [309631.669] (II) No input driver specified, ignoring this device. [309631.669] (II) This device may have been added with another device file. [309631.669] (II) config/udev: removing device Logitech Logitech Wireless Headset [309631.712] (II) UnloadModule: "libinput" [309631.712] (II) config/udev: Adding input device Logitech Logitech Wireless Headset (/dev/input/event4) [309631.712] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [309631.712] (**) Logitech Logitech Wireless Headset: Applying InputClass "system-keyboard" [309631.712] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [309631.712] (**) Logitech Logitech Wireless Headset: Applying InputClass "libinput keyboard catchall" [309631.712] (II) Using input driver 'libinput' for 'Logitech Logitech Wireless Headset' [309631.712] (**) Logitech Logitech Wireless Headset: always reports core events [309631.712] (**) Option "Device" "/dev/input/event4" [309631.712] (**) Option "_source" "server/udev" [309631.712] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is tagged by udev as: Keyboard [309631.712] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is a keyboard [309631.752] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-2/8-2:1.3/0003:046D:0A29.0008/input/input10/event4" [309631.752] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 14) [309631.752] (**) Option "xkb_layout" "us" [309631.752] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is tagged by udev as: Keyboard [309631.752] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is a keyboard [309631.753] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event15) [309631.753] (II) No input driver specified, ignoring this device. [309631.753] (II) This device may have been added with another device file. [309631.753] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event19) [309631.753] (II) No input driver specified, ignoring this device. [309631.753] (II) This device may have been added with another device file. [309631.753] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event22) [309631.753] (II) No input driver specified, ignoring this device. [309631.753] (II) This device may have been added with another device file. [309631.753] (II) config/udev: removing device Power Button [309631.768] (II) UnloadModule: "libinput" [309631.768] (II) config/udev: Adding input device Power Button (/dev/input/event7) [309631.768] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309631.768] (**) Power Button: Applying InputClass "system-keyboard" [309631.768] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309631.768] (**) Power Button: Applying InputClass "libinput keyboard catchall" [309631.768] (II) Using input driver 'libinput' for 'Power Button' [309631.768] (**) Power Button: always reports core events [309631.768] (**) Option "Device" "/dev/input/event7" [309631.768] (**) Option "_source" "server/udev" [309631.768] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard [309631.768] (II) input device 'Power Button', /dev/input/event7 is a keyboard [309631.784] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event7" [309631.784] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [309631.784] (**) Option "xkb_layout" "us" [309631.784] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard [309631.784] (II) input device 'Power Button', /dev/input/event7 is a keyboard [309631.785] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event20) [309631.785] (II) No input driver specified, ignoring this device. [309631.785] (II) This device may have been added with another device file. [309631.785] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event18) [309631.785] (II) No input driver specified, ignoring this device. [309631.785] (II) This device may have been added with another device file. [309631.785] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event9) [309631.785] (II) No input driver specified, ignoring this device. [309631.785] (II) This device may have been added with another device file. [309631.785] (II) config/udev: removing device Microsoft® LifeCam HD-5000 [309631.820] (II) UnloadModule: "libinput" [309631.820] (II) config/udev: Adding input device Microsoft® LifeCam HD-5000 (/dev/input/event23) [309631.820] (**) Microsoft® LifeCam HD-5000: Applying InputClass "evdev keyboard catchall" [309631.820] (**) Microsoft® LifeCam HD-5000: Applying InputClass "system-keyboard" [309631.820] (**) Microsoft® LifeCam HD-5000: Applying InputClass "evdev keyboard catchall" [309631.820] (**) Microsoft® LifeCam HD-5000: Applying InputClass "libinput keyboard catchall" [309631.820] (II) Using input driver 'libinput' for 'Microsoft® LifeCam HD-5000' [309631.820] (**) Microsoft® LifeCam HD-5000: always reports core events [309631.820] (**) Option "Device" "/dev/input/event23" [309631.820] (**) Option "_source" "server/udev" [309631.821] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is tagged by udev as: Keyboard [309631.821] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is a keyboard [309631.864] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input29/event23" [309631.864] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-5000" (type: KEYBOARD, id 8) [309631.864] (**) Option "xkb_layout" "us" [309631.864] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is tagged by udev as: Keyboard [309631.864] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is a keyboard [309631.865] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse3) [309631.865] (II) No input driver specified, ignoring this device. [309631.865] (II) This device may have been added with another device file. [309631.865] (II) config/udev: removing device Power Button [309631.880] (II) UnloadModule: "libinput" [309631.880] (II) config/udev: Adding input device Power Button (/dev/input/event7) [309631.880] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309631.880] (**) Power Button: Applying InputClass "system-keyboard" [309631.880] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309631.880] (**) Power Button: Applying InputClass "libinput keyboard catchall" [309631.880] (II) Using input driver 'libinput' for 'Power Button' [309631.880] (**) Power Button: always reports core events [309631.880] (**) Option "Device" "/dev/input/event7" [309631.880] (**) Option "_source" "server/udev" [309631.880] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard [309631.880] (II) input device 'Power Button', /dev/input/event7 is a keyboard [309631.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event7" [309631.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [309631.900] (**) Option "xkb_layout" "us" [309631.900] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard [309631.900] (II) input device 'Power Button', /dev/input/event7 is a keyboard [309631.901] (II) config/udev: removing device Microsoft® LifeCam HD-5000 [309631.952] (II) UnloadModule: "libinput" [309631.952] (II) config/udev: Adding input device Microsoft® LifeCam HD-5000 (/dev/input/event23) [309631.952] (**) Microsoft® LifeCam HD-5000: Applying InputClass "evdev keyboard catchall" [309631.952] (**) Microsoft® LifeCam HD-5000: Applying InputClass "system-keyboard" [309631.952] (**) Microsoft® LifeCam HD-5000: Applying InputClass "evdev keyboard catchall" [309631.952] (**) Microsoft® LifeCam HD-5000: Applying InputClass "libinput keyboard catchall" [309631.952] (II) Using input driver 'libinput' for 'Microsoft® LifeCam HD-5000' [309631.952] (**) Microsoft® LifeCam HD-5000: always reports core events [309631.952] (**) Option "Device" "/dev/input/event23" [309631.952] (**) Option "_source" "server/udev" [309631.952] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is tagged by udev as: Keyboard [309631.952] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is a keyboard [309631.996] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input29/event23" [309631.996] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-5000" (type: KEYBOARD, id 8) [309631.996] (**) Option "xkb_layout" "us" [309631.996] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is tagged by udev as: Keyboard [309631.996] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is a keyboard [309631.997] (II) config/udev: removing device Power Button [309632.016] (II) UnloadModule: "libinput" [309632.016] (II) config/udev: Adding input device Power Button (/dev/input/event6) [309632.016] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309632.016] (**) Power Button: Applying InputClass "system-keyboard" [309632.016] (**) Power Button: Applying InputClass "evdev keyboard catchall" [309632.016] (**) Power Button: Applying InputClass "libinput keyboard catchall" [309632.016] (II) Using input driver 'libinput' for 'Power Button' [309632.016] (**) Power Button: always reports core events [309632.016] (**) Option "Device" "/dev/input/event6" [309632.016] (**) Option "_source" "server/udev" [309632.016] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard [309632.016] (II) input device 'Power Button', /dev/input/event6 is a keyboard [309632.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event6" [309632.040] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [309632.040] (**) Option "xkb_layout" "us" [309632.040] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard [309632.040] (II) input device 'Power Button', /dev/input/event6 is a keyboard [309632.041] (II) config/udev: removing device Logitech M705 [309632.084] (II) UnloadModule: "libinput" [309632.084] (II) config/udev: Adding input device Logitech M705 (/dev/input/event3) [309632.084] (**) Logitech M705: Applying InputClass "evdev pointer catchall" [309632.084] (**) Logitech M705: Applying InputClass "evdev pointer catchall" [309632.084] (**) Logitech M705: Applying InputClass "libinput pointer catchall" [309632.084] (II) Using input driver 'libinput' for 'Logitech M705' [309632.084] (**) Logitech M705: always reports core events [309632.084] (**) Option "Device" "/dev/input/event3" [309632.084] (**) Option "_source" "server/udev" [309632.085] (II) input device 'Logitech M705', /dev/input/event3 is tagged by udev as: Mouse [309632.085] (II) Device 'Logitech M705' set to 800 DPI [309632.085] (II) input device 'Logitech M705', /dev/input/event3 is a pointer caps [309632.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0006/input/input9/event3" [309632.124] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 12) [309632.124] (**) Option "AccelerationScheme" "none" [309632.124] (**) Logitech M705: (accel) selected scheme none/0 [309632.124] (**) Logitech M705: (accel) acceleration factor: 2.000 [309632.124] (**) Logitech M705: (accel) acceleration threshold: 4 [309632.124] (II) input device 'Logitech M705', /dev/input/event3 is tagged by udev as: Mouse [309632.124] (II) Device 'Logitech M705' set to 800 DPI [309632.124] (II) input device 'Logitech M705', /dev/input/event3 is a pointer caps [309632.124] (II) config/udev: removing device Logitech Logitech Wireless Headset [309632.168] (II) UnloadModule: "libinput" [309632.168] (II) config/udev: Adding input device Logitech Logitech Wireless Headset (/dev/input/event4) [309632.168] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [309632.168] (**) Logitech Logitech Wireless Headset: Applying InputClass "system-keyboard" [309632.168] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [309632.168] (**) Logitech Logitech Wireless Headset: Applying InputClass "libinput keyboard catchall" [309632.168] (II) Using input driver 'libinput' for 'Logitech Logitech Wireless Headset' [309632.168] (**) Logitech Logitech Wireless Headset: always reports core events [309632.168] (**) Option "Device" "/dev/input/event4" [309632.168] (**) Option "_source" "server/udev" [309632.169] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is tagged by udev as: Keyboard [309632.169] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is a keyboard [309632.216] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-2/8-2:1.3/0003:046D:0A29.0008/input/input10/event4" [309632.216] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 14) [309632.216] (**) Option "xkb_layout" "us" [309632.216] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is tagged by udev as: Keyboard [309632.216] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is a keyboard [309632.217] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8) [309632.217] (II) No input driver specified, ignoring this device. [309632.217] (II) This device may have been added with another device file. [309632.217] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event17) [309632.217] (II) No input driver specified, ignoring this device. [309632.217] (II) This device may have been added with another device file. [309632.218] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event12) [309632.218] (II) No input driver specified, ignoring this device. [309632.218] (II) This device may have been added with another device file. [309632.218] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event21) [309632.218] (II) No input driver specified, ignoring this device. [309632.218] (II) This device may have been added with another device file. [309632.218] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event20) [309632.218] (II) No input driver specified, ignoring this device. [309632.218] (II) This device may have been added with another device file. [309632.218] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event11) [309632.218] (II) No input driver specified, ignoring this device. [309632.218] (II) This device may have been added with another device file. [309632.218] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event16) [309632.218] (II) No input driver specified, ignoring this device. [309632.218] (II) This device may have been added with another device file. [309632.219] (II) config/udev: Adding input device PC Speaker (/dev/input/event14) [309632.219] (II) No input driver specified, ignoring this device. [309632.219] (II) This device may have been added with another device file. [309632.219] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event19) [309632.219] (II) No input driver specified, ignoring this device. [309632.219] (II) This device may have been added with another device file. [309632.219] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event15) [309632.219] (II) No input driver specified, ignoring this device. [309632.219] (II) This device may have been added with another device file. [309632.219] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event10) [309632.219] (II) No input driver specified, ignoring this device. [309632.219] (II) This device may have been added with another device file. [309632.219] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event22) [309632.219] (II) No input driver specified, ignoring this device. [309632.219] (II) This device may have been added with another device file. [309632.219] (II) config/udev: removing device Logitech MK700 [309632.220] (II) UnloadModule: "libinput" [309632.220] (II) config/udev: removing device Logitech MK700 [309632.288] (II) UnloadModule: "libinput" [309632.288] (II) config/udev: Adding input device Logitech MK700 (/dev/input/event5) [309632.288] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309632.288] (**) Logitech MK700: Applying InputClass "system-keyboard" [309632.288] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309632.288] (**) Logitech MK700: Applying InputClass "libinput keyboard catchall" [309632.288] (II) Using input driver 'libinput' for 'Logitech MK700' [309632.288] (**) Logitech MK700: always reports core events [309632.288] (**) Option "Device" "/dev/input/event5" [309632.288] (**) Option "_source" "server/udev" [309632.289] (II) input device 'Logitech MK700', /dev/input/event5 is tagged by udev as: Keyboard [309632.289] (II) input device 'Logitech MK700', /dev/input/event5 is a keyboard [309632.328] (II) libinput: Logitech MK700: needs a virtual subdevice [309632.328] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:2008.0007/input/input11/event5" [309632.328] (II) XINPUT: Adding extended input device "Logitech MK700" (type: MOUSE, id 13) [309632.328] (**) Option "AccelerationScheme" "none" [309632.328] (**) Logitech MK700: (accel) selected scheme none/0 [309632.328] (**) Logitech MK700: (accel) acceleration factor: 2.000 [309632.328] (**) Logitech MK700: (accel) acceleration threshold: 4 [309632.328] (II) input device 'Logitech MK700', /dev/input/event5 is tagged by udev as: Keyboard [309632.328] (II) input device 'Logitech MK700', /dev/input/event5 is a keyboard [309632.329] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309632.329] (**) Logitech MK700: Applying InputClass "system-keyboard" [309632.329] (**) Logitech MK700: Applying InputClass "evdev keyboard catchall" [309632.329] (**) Logitech MK700: Applying InputClass "libinput keyboard catchall" [309632.329] (II) Using input driver 'libinput' for 'Logitech MK700' [309632.329] (**) Logitech MK700: always reports core events [309632.329] (**) Option "Device" "/dev/input/event5" [309632.329] (**) Option "_source" "_driver/libinput" [309632.329] (II) libinput: Logitech MK700: is a virtual subdevice [309632.329] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/0003:046D:2008.0007/input/input11/event5" [309632.329] (II) XINPUT: Adding extended input device "Logitech MK700" (type: KEYBOARD, id 16) [309632.329] (**) Option "xkb_layout" "us" [309632.329] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event18) [309632.329] (II) No input driver specified, ignoring this device. [309632.329] (II) This device may have been added with another device file. [309632.330] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event13) [309632.330] (II) No input driver specified, ignoring this device. [309632.330] (II) This device may have been added with another device file. [309632.330] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event9) [309632.330] (II) No input driver specified, ignoring this device. [309632.330] (II) This device may have been added with another device file. [309632.903] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Pen stylus [309632.905] (II) UnloadModule: "wacom" [309632.905] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Pen eraser [309632.961] (II) UnloadModule: "wacom" [309632.961] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/event0) [309632.961] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "evdev tablet catchall" [309632.961] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "evdev tablet catchall" [309632.961] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "libinput tablet catchall" [309632.961] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "Wacom USB tablet class" [309632.961] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "Wacom tablet class" [309632.961] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen' [309632.961] (**) Wacom Bamboo 2FG 4x5 Pen: always reports core events [309632.961] (**) Option "Device" "/dev/input/event0" [309633.024] (II) Wacom Bamboo 2FG 4x5 Pen: type not specified, assuming 'stylus'. [309633.024] (II) Wacom Bamboo 2FG 4x5 Pen: other types will be automatically added. [309633.024] (--) Wacom Bamboo 2FG 4x5 Pen stylus: using pressure threshold of 27 for button 1 [309633.024] (--) Wacom Bamboo 2FG 4x5 Pen stylus: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled [309633.024] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging dependent devices. [309633.024] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'cursor' for this device. [309633.024] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'touch' for this device. [309633.024] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'pad' for this device. [309633.024] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging completed. [309633.064] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.0/0003:056A:00D1.0004/input/input3/event0" [309633.064] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen stylus" (type: STYLUS, id 9) [309633.064] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) keeping acceleration scheme 1 [309633.064] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration profile 0 [309633.064] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration factor: 2.000 [309633.064] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration threshold: 4 [309633.124] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "evdev tablet catchall" [309633.124] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "evdev tablet catchall" [309633.124] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "libinput tablet catchall" [309633.124] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "Wacom USB tablet class" [309633.124] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "Wacom tablet class" [309633.124] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen eraser' [309633.124] (**) Wacom Bamboo 2FG 4x5 Pen eraser: always reports core events [309633.124] (**) Option "Device" "/dev/input/event0" [309633.124] (**) Option "Type" "eraser" [309633.124] (--) Wacom Bamboo 2FG 4x5 Pen eraser: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled [309633.140] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.0/0003:056A:00D1.0004/input/input3/event0" [309633.140] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen eraser" (type: ERASER, id 15) [309633.140] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) keeping acceleration scheme 1 [309633.140] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration profile 0 [309633.140] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration factor: 2.000 [309633.140] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration threshold: 4 [309633.140] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Pad pad [309633.196] (II) UnloadModule: "wacom" [309633.196] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/event2) [309633.197] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "evdev tablet catchall" [309633.197] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "evdev tablet catchall" [309633.197] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "libinput tablet catchall" [309633.197] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "Wacom USB tablet class" [309633.197] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "Wacom tablet class" [309633.197] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pad' [309633.197] (**) Wacom Bamboo 2FG 4x5 Pad: always reports core events [309633.197] (**) Option "Device" "/dev/input/event2" [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'stylus' for this device. [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'eraser' for this device. [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'cursor' for this device. [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'touch' for this device. [309633.197] (II) Wacom Bamboo 2FG 4x5 Pad: type not specified, assuming 'pad'. [309633.197] (II) Wacom Bamboo 2FG 4x5 Pad: other types will be automatically added. [309633.197] (II) Wacom Bamboo 2FG 4x5 Pad pad: hotplugging dependent devices. [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'stylus' for this device. [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'eraser' for this device. [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'cursor' for this device. [309633.197] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'touch' for this device. [309633.197] (II) Wacom Bamboo 2FG 4x5 Pad pad: hotplugging completed. [309633.232] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.1/0003:056A:00D1.0005/input/input8/event2" [309633.232] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pad pad" (type: PAD, id 11) [309633.232] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) keeping acceleration scheme 1 [309633.232] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration profile 0 [309633.232] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration factor: 2.000 [309633.232] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration threshold: 4 [309633.233] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/mouse2) [309633.233] (II) No input driver specified, ignoring this device. [309633.233] (II) This device may have been added with another device file. [309633.233] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/js0) [309633.233] (II) No input driver specified, ignoring this device. [309633.233] (II) This device may have been added with another device file. [309633.234] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/mouse0) [309633.234] (II) No input driver specified, ignoring this device. [309633.234] (II) This device may have been added with another device file. [309633.234] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Pen stylus [309633.235] (II) UnloadModule: "wacom" [309633.235] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Pen eraser [309633.273] (II) UnloadModule: "wacom" [309633.273] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/event0) [309633.273] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "evdev tablet catchall" [309633.273] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "evdev tablet catchall" [309633.273] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "libinput tablet catchall" [309633.273] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "Wacom USB tablet class" [309633.273] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "Wacom tablet class" [309633.273] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen' [309633.273] (**) Wacom Bamboo 2FG 4x5 Pen: always reports core events [309633.273] (**) Option "Device" "/dev/input/event0" [309633.332] (II) Wacom Bamboo 2FG 4x5 Pen: type not specified, assuming 'stylus'. [309633.332] (II) Wacom Bamboo 2FG 4x5 Pen: other types will be automatically added. [309633.332] (--) Wacom Bamboo 2FG 4x5 Pen stylus: using pressure threshold of 27 for button 1 [309633.332] (--) Wacom Bamboo 2FG 4x5 Pen stylus: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled [309633.332] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging dependent devices. [309633.332] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'cursor' for this device. [309633.332] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'touch' for this device. [309633.332] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'pad' for this device. [309633.332] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging completed. [309633.380] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.0/0003:056A:00D1.0004/input/input3/event0" [309633.380] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen stylus" (type: STYLUS, id 9) [309633.380] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) keeping acceleration scheme 1 [309633.380] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration profile 0 [309633.380] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration factor: 2.000 [309633.380] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration threshold: 4 [309633.440] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "evdev tablet catchall" [309633.440] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "evdev tablet catchall" [309633.440] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "libinput tablet catchall" [309633.440] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "Wacom USB tablet class" [309633.440] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "Wacom tablet class" [309633.440] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen eraser' [309633.440] (**) Wacom Bamboo 2FG 4x5 Pen eraser: always reports core events [309633.440] (**) Option "Device" "/dev/input/event0" [309633.440] (**) Option "Type" "eraser" [309633.440] (--) Wacom Bamboo 2FG 4x5 Pen eraser: maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled [309633.460] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.0/0003:056A:00D1.0004/input/input3/event0" [309633.460] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen eraser" (type: ERASER, id 15) [309633.460] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) keeping acceleration scheme 1 [309633.460] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration profile 0 [309633.460] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration factor: 2.000 [309633.460] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration threshold: 4 [309633.461] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Pad pad [309633.492] (II) UnloadModule: "wacom" [309633.492] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pad (/dev/input/event2) [309633.492] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "evdev tablet catchall" [309633.492] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "evdev tablet catchall" [309633.492] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "libinput tablet catchall" [309633.492] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "Wacom USB tablet class" [309633.492] (**) Wacom Bamboo 2FG 4x5 Pad: Applying InputClass "Wacom tablet class" [309633.492] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pad' [309633.492] (**) Wacom Bamboo 2FG 4x5 Pad: always reports core events [309633.492] (**) Option "Device" "/dev/input/event2" [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'stylus' for this device. [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'eraser' for this device. [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'cursor' for this device. [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad: Invalid type 'touch' for this device. [309633.492] (II) Wacom Bamboo 2FG 4x5 Pad: type not specified, assuming 'pad'. [309633.492] (II) Wacom Bamboo 2FG 4x5 Pad: other types will be automatically added. [309633.492] (II) Wacom Bamboo 2FG 4x5 Pad pad: hotplugging dependent devices. [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'stylus' for this device. [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'eraser' for this device. [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'cursor' for this device. [309633.492] (EE) Wacom Bamboo 2FG 4x5 Pad pad: Invalid type 'touch' for this device. [309633.492] (II) Wacom Bamboo 2FG 4x5 Pad pad: hotplugging completed. [309633.548] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.1/0003:056A:00D1.0005/input/input8/event2" [309633.548] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pad pad" (type: PAD, id 11) [309633.548] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) keeping acceleration scheme 1 [309633.548] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration profile 0 [309633.548] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration factor: 2.000 [309633.548] (**) Wacom Bamboo 2FG 4x5 Pad pad: (accel) acceleration threshold: 4 [309633.549] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Finger touch [309633.592] (II) UnloadModule: "wacom" [309633.592] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Finger (/dev/input/event1) [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "evdev touchpad catchall" [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "evdev touchpad catchall" [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "libinput touchpad catchall" [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "touchpad catchall" [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Default clickpad buttons" [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Wacom USB touchpad class" [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Wacom touchpad class" [309633.592] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Finger' [309633.592] (**) Wacom Bamboo 2FG 4x5 Finger: always reports core events [309633.592] (**) Option "Device" "/dev/input/event1" [309633.592] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'stylus' for this device. [309633.592] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'eraser' for this device. [309633.592] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'cursor' for this device. [309633.592] (II) Wacom Bamboo 2FG 4x5 Finger: type not specified, assuming 'touch'. [309633.592] (II) Wacom Bamboo 2FG 4x5 Finger: other types will be automatically added. [309633.592] (--) Wacom Bamboo 2FG 4x5 Finger touch: maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000 [309633.592] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging dependent devices. [309633.592] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'stylus' for this device. [309633.592] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'eraser' for this device. [309633.592] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'cursor' for this device. [309633.592] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'pad' for this device. [309633.593] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging completed. [309633.628] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.1/0003:056A:00D1.0005/input/input7/event1" [309633.628] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Finger touch" (type: TOUCH, id 10) [309633.628] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) keeping acceleration scheme 1 [309633.628] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration profile 0 [309633.628] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration factor: 2.000 [309633.628] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration threshold: 4 [309633.629] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Finger (/dev/input/mouse1) [309633.629] (**) Wacom Bamboo 2FG 4x5 Finger: Ignoring device from InputClass "touchpad ignore duplicates" [309633.629] (II) config/udev: removing device Wacom Bamboo 2FG 4x5 Finger touch [309633.660] (II) UnloadModule: "wacom" [309633.660] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Finger (/dev/input/event1) [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "evdev touchpad catchall" [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "evdev touchpad catchall" [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "libinput touchpad catchall" [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "touchpad catchall" [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Default clickpad buttons" [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Wacom USB touchpad class" [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Wacom touchpad class" [309633.660] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Finger' [309633.660] (**) Wacom Bamboo 2FG 4x5 Finger: always reports core events [309633.660] (**) Option "Device" "/dev/input/event1" [309633.660] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'stylus' for this device. [309633.660] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'eraser' for this device. [309633.660] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'cursor' for this device. [309633.660] (II) Wacom Bamboo 2FG 4x5 Finger: type not specified, assuming 'touch'. [309633.660] (II) Wacom Bamboo 2FG 4x5 Finger: other types will be automatically added. [309633.660] (--) Wacom Bamboo 2FG 4x5 Finger touch: maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000 [309633.660] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging dependent devices. [309633.660] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'stylus' for this device. [309633.660] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'eraser' for this device. [309633.660] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'cursor' for this device. [309633.660] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'pad' for this device. [309633.660] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging completed. [309633.712] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-2/5-2:1.1/0003:056A:00D1.0005/input/input7/event1" [309633.712] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Finger touch" (type: TOUCH, id 10) [309633.712] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) keeping acceleration scheme 1 [309633.712] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration profile 0 [309633.712] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration factor: 2.000 [309633.712] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration threshold: 4 [312422.740] (II) AIGLX: Suspending AIGLX clients for VT switch [312425.049] (II) AIGLX: Resuming AIGLX clients after VT switch [312425.118] (II) RADEON(0): EDID vendor "GSM", prod id 23006 [312425.118] (II) RADEON(0): Using hsync ranges from config file [312425.118] (II) RADEON(0): Using vrefresh ranges from config file [312425.118] (II) RADEON(0): Printing DDC gathered Modelines: [312425.118] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [312425.118] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [312425.118] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [312425.118] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [312425.118] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [312425.118] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [312425.118] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [312425.118] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [312425.118] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [312425.118] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [312425.118] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [312425.118] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [312425.118] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e) [312425.118] (II) RADEON(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [312425.118] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [312425.118] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [312425.118] (II) RADEON(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [312425.118] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [312425.118] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [312425.120] (II) input device 'Power Button', /dev/input/event7 is tagged by udev as: Keyboard [312425.120] (II) input device 'Power Button', /dev/input/event7 is a keyboard [312425.120] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is tagged by udev as: Keyboard [312425.120] (II) input device 'Microsoft® LifeCam HD-5000', /dev/input/event23 is a keyboard [312425.120] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard [312425.120] (II) input device 'Power Button', /dev/input/event6 is a keyboard [312425.121] (II) input device 'Logitech M705', /dev/input/event3 is tagged by udev as: Mouse [312425.121] (II) Device 'Logitech M705' set to 800 DPI [312425.121] (II) input device 'Logitech M705', /dev/input/event3 is a pointer caps [312425.121] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is tagged by udev as: Keyboard [312425.121] (II) input device 'Logitech Logitech Wireless Headset', /dev/input/event4 is a keyboard [312425.122] (II) input device 'Logitech MK700', /dev/input/event5 is tagged by udev as: Keyboard [312425.122] (II) input device 'Logitech MK700', /dev/input/event5 is a keyboard