[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2016-04-01 [ 0.000000] Linux version 4.11.0-rc7-next-20170421-00002-g99976b6-dirty (rafael@RPC) (gcc version 7.0.0-alpha20170219 20170219 (experimental) (Gentoo 7.0.0_alpha20170219) ) #28 SMP PREEMPT Wed Apr 26 17:30:45 CEST 2017 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc7-next-20170421-00002-g99976b6-dirty root=/dev/sda4 ro drm.debug=14 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009aabefff] usable [ 0.000000] BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 3537/0PHTY0, BIOS A07 11/12/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7F80000000 write-back [ 0.000000] 7 base 025F600000 mask 7FFFE00000 uncachable [ 0.000000] 8 base 025F800000 mask 7FFF800000 uncachable [ 0.000000] 9 base 0260000000 mask 7FE0000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x021d1000, 0x021d1fff] PGTABLE [ 0.000000] BRK [0x021d2000, 0x021d2fff] PGTABLE [ 0.000000] BRK [0x021d3000, 0x021d3fff] PGTABLE [ 0.000000] BRK [0x021d4000, 0x021d4fff] PGTABLE [ 0.000000] BRK [0x021d5000, 0x021d5fff] PGTABLE [ 0.000000] BRK [0x021d6000, 0x021d6fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 DELL CL09 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000009AFF9000 00010C (v05 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: DSDT 0x000000009AFEA000 00B97B (v01 DELL CL09 00000000 ASL 00040000) [ 0.000000] ACPI: FACS 0x000000009AFB8000 000040 [ 0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: FPDT 0x000000009AFFB000 000044 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: ASF! 0x000000009AFFA000 0000A5 (v32 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: HPET 0x000000009AFF8000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: APIC 0x000000009AFF7000 00008C (v03 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: MCFG 0x000000009AFF6000 00003C (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFE9000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x000000009AFE7000 000028 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: LPIT 0x000000009AFE6000 000094 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: ASPT 0x000000009AFE4000 000034 (v07 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: DBGP 0x000000009AFE3000 000034 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFDD000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFDC000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFD8000 003517 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFD6000 001E3D (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25f5f9000-0x25f5fcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000094d5ffff] [ 0.000000] node 0: [mem 0x0000000095d60000-0x000000009aabefff] [ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff] [ 0.000000] On node 0 totalpages: 2068572 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9771 pages used for memmap [ 0.000000] DMA32 zone: 625344 pages, LIFO batch:31 [ 0.000000] Normal zone: 22488 pages used for memmap [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 37 pages/cpu @ffff88025f200000 s112600 r8192 d30760 u262144 [ 0.000000] pcpu-alloc: s112600 r8192 d30760 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036228 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc7-next-20170421-00002-g99976b6-dirty root=/dev/sda4 ro drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 8057636K/8274288K available (9636K kernel code, 1491K rwdata, 3568K rodata, 1412K init, 884K bss, 216652K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 35958 entries in 141 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:760 16 [ 0.000000] NO_HZ: Clearing 0 from nohz_full range for timekeeping [ 0.000000] NO_HZ: Full dynticks CPUs: 1-7. [ 0.000000] Note: kernel parameter 'rcu_nocbs=' contains nonexistent CPUs. [ 0.000000] Offload RCU callbacks from CPUs: 1-7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2394.536 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.07 BogoMIPS (lpj=2394536) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170119 [ 0.013860] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.013920] Security Framework initialized [ 0.013953] Yama: becoming mindful. [ 0.015498] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.016308] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016379] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016441] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016708] CPU: Physical Processor ID: 0 [ 0.016741] CPU: Processor Core ID: 0 [ 0.016775] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.016812] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.016855] mce: CPU supports 7 MCE banks [ 0.016896] CPU0: Thermal monitoring enabled (TM1) [ 0.016944] process: using mwait in idle threads [ 0.016979] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.017003] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.017200] Freeing SMP alternatives memory: 28K [ 0.018065] smpboot: Max logical packages: 4 [ 0.018676] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028811] TSC deadline timer enabled [ 0.028813] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.032020] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032130] ... version: 3 [ 0.032162] ... bit width: 48 [ 0.032194] ... generic registers: 4 [ 0.032225] ... value mask: 0000ffffffffffff [ 0.032260] ... max period: 00007fffffffffff [ 0.032295] ... fixed-purpose events: 3 [ 0.033001] ... event mask: 000000070000000f [ 0.037474] NMI watchdog: Disabling watchdog on nohz_full cores by default [ 0.039170] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.041014] smp: Bringing up secondary CPUs ... [ 0.049053] x86: Booting SMP configuration: [ 0.049086] .... node #0, CPUs: #1 #2 #3 [ 0.249023] smp: Brought up 1 node, 4 CPUs [ 0.249071] smpboot: Total of 4 processors activated (19180.28 BogoMIPS) [ 0.250127] sched_clock: Marking stable (250000000, 0)->(255451771, -5451771) [ 0.250473] devtmpfs: initialized [ 0.250675] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.250805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.250877] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.250983] pinctrl core: initialized pinctrl subsystem [ 0.251186] NET: Registered protocol family 16 [ 0.251404] cpuidle: using governor ladder [ 0.251441] PCCT header not found. [ 0.251501] Simple Boot Flag at 0x44 set to 0x1 [ 0.251548] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.251605] ACPI: bus type PCI registered [ 0.251694] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.251796] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.251850] PCI: Using configuration type 1 for base access [ 0.251892] dmi type 0xB1 record - unknown flag [ 0.251968] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.253834] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.253874] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.254139] ACPI: Added _OSI(Module Device) [ 0.254174] ACPI: Added _OSI(Processor Device) [ 0.254207] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.254240] ACPI: Added _OSI(Processor Aggregator Device) [ 0.254501] ACPI: Executed 1 blocks of module-level executable AML code [ 0.260466] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.261534] ACPI: Dynamic OEM Table Load: [ 0.261575] ACPI: SSDT 0xFFFF880255599400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.262045] ACPI: Dynamic OEM Table Load: [ 0.262088] ACPI: SSDT 0xFFFF88025555C000 0005AA (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.262597] ACPI: Dynamic OEM Table Load: [ 0.262634] ACPI: SSDT 0xFFFF8802555F4600 000119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.263804] ACPI : EC: EC started [ 0.263836] ACPI : EC: interrupt blocked [ 0.395392] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.395429] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.395486] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.395543] ACPI: Interpreter enabled [ 0.395613] ACPI: (supports S0 S3 S4 S5) [ 0.395644] ACPI: Using IOAPIC for interrupt routing [ 0.395709] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.537577] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.537621] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.538269] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.538329] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.538818] PCI host bridge to bus 0000:00 [ 0.538853] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.538893] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.538932] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.538989] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.539047] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.539090] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.539249] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.539261] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.539269] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.539274] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.539425] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.539436] pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit] [ 0.539611] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.539629] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit] [ 0.539690] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.539812] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.539886] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.539906] pci 0000:00:16.0: reg 0x10: [mem 0xc0818000-0xc081801f 64bit] [ 0.539979] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.540120] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.540136] pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit] [ 0.541779] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.541920] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400 [ 0.541989] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.542167] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.542242] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.542311] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.542485] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 [ 0.542553] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.542730] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.543639] pci 0000:00:1d.0: reg 0x10: [mem 0xc081c000-0xc081c3ff] [ 0.549069] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.549197] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.549272] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.549511] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.549524] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f] [ 0.549531] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097] [ 0.549538] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087] [ 0.549545] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093] [ 0.549552] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.549560] pci 0000:00:1f.2: reg 0x24: [mem 0xc081b000-0xc081b7ff] [ 0.549596] pci 0000:00:1f.2: PME# supported from D3hot [ 0.549720] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.549735] pci 0000:00:1f.3: reg 0x10: [mem 0xc0819000-0xc08190ff 64bit] [ 0.549755] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.549958] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.549992] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.550025] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc0700fff 64bit] [ 0.550047] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.550169] pci 0000:01:00.0: supports D1 D2 [ 0.550171] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.553173] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.553212] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.553215] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff] [ 0.553220] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.553304] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000 [ 0.553347] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0607fff 64bit] [ 0.553542] pci 0000:02:00.0: supports D1 D2 [ 0.553543] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.556737] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.556777] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff] [ 0.556849] pci 0000:03:00.0: [1002:6823] type 00 class 0x030000 [ 0.556878] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.556894] pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit] [ 0.556903] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.556921] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.557006] pci 0000:03:00.0: supports D1 D2 [ 0.557007] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.557080] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.559745] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.559782] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.559785] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff] [ 0.559790] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 1.331250] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.331345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.331455] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.331546] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.331635] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.331747] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.331860] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.331950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.332268] ACPI: Enabled 5 GPEs in block 00 to 7F [ 1.332360] ACPI : EC: interrupt unblocked [ 1.332399] ACPI : EC: event unblocked [ 1.332437] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.332494] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 1.332627] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.332665] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.332730] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.332795] pci 0000:03:00.0: vgaarb: bridge control possible [ 1.332831] pci 0000:00:02.0: vgaarb: no bridge control possible [ 1.332868] vgaarb: loaded [ 1.332962] SCSI subsystem initialized [ 1.333035] libata version 3.00 loaded. [ 1.333052] EDAC MC: Ver: 3.0.0 [ 1.333225] PCI: Using ACPI for IRQ routing [ 1.339227] PCI: pci_cache_line_size set to 64 bytes [ 1.339298] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 1.339299] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff] [ 1.339300] e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff] [ 1.339301] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 1.339302] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 1.339481] NetLabel: Initializing [ 1.339513] NetLabel: domain hash size = 128 [ 1.339546] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.339600] NetLabel: unlabeled traffic allowed by default [ 1.339735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.339782] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.341838] clocksource: Switched to clocksource hpet [ 1.355764] VFS: Disk quotas dquot_6.6.0 [ 1.355818] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.355951] pnp: PnP ACPI init [ 1.356130] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.356170] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 1.356207] system 00:00: [io 0xffff] has been reserved [ 1.356243] system 00:00: [io 0xffff] has been reserved [ 1.356279] system 00:00: [io 0xffff] has been reserved [ 1.356315] system 00:00: [io 0x1800-0x18fe] has been reserved [ 1.356352] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.356392] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.356444] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.356497] system 00:02: [io 0x1854-0x1857] has been reserved [ 1.356536] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.356576] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.356601] pnp 00:04: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active) [ 1.422014] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.422054] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.422093] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.422132] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.422171] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.422210] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.422249] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.422288] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 1.422327] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 1.422367] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.422407] system 00:05: [mem 0x9fa22000-0x9fa22fff] has been reserved [ 1.422446] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 1.422486] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.423097] pnp: PnP ACPI: found 6 devices [ 1.429196] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.429262] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 1.429349] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.429385] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.429426] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff] [ 1.429467] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.429529] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.429566] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff] [ 1.429614] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref] [ 1.429671] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.429706] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 1.429746] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff] [ 1.429788] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 1.429853] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.429855] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.429856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.429858] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window] [ 1.429859] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.429861] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff] [ 1.429862] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.429863] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff] [ 1.429865] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.429866] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff] [ 1.429867] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 1.429990] NET: Registered protocol family 2 [ 1.430200] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.430386] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.430560] TCP: Hash tables configured (established 65536 bind 65536) [ 1.430632] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.430696] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.430793] NET: Registered protocol family 1 [ 1.430848] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.443981] PCI: CLS 64 bytes, default 64 [ 1.443995] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.444036] software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff] [ 1.444171] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 1.444230] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 1.444266] RAPL PMU: hw unit of domain package 2^-14 Joules [ 1.444302] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 1.444337] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 1.444911] Scanning for low memory corruption every 60 seconds [ 1.445750] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.447922] zbud: loaded [ 1.448381] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.448506] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.449728] SGI XFS with security attributes, no debug enabled [ 1.450729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.450820] io scheduler noop registered [ 1.450861] io scheduler deadline registered [ 1.450902] io scheduler cfq registered (default) [ 1.450935] io scheduler mq-deadline registered [ 1.450969] io scheduler kyber registered [ 1.451024] io scheduler bfq registered [ 1.451689] pcieport 0000:00:1c.0: Signaling PME with IRQ 40 [ 1.451742] pcieport 0000:00:1c.3: Signaling PME with IRQ 41 [ 1.451794] pcieport 0000:00:1c.4: Signaling PME with IRQ 42 [ 1.451962] ACPI: AC Adapter [ACAD] (on-line) [ 1.452080] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0 [ 1.452148] ACPI: Lid Switch [LID0] [ 1.452210] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1 [ 1.452275] ACPI: Power Button [PWRB] [ 1.452346] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.452404] ACPI: Power Button [PWRF] [ 1.452866] Monitor-Mwait will be used to enter C-1 state [ 1.452871] Monitor-Mwait will be used to enter C-2 state [ 1.454806] GHES: HEST is not enabled! [ 1.674930] [Firmware Bug]: battery: (dis)charge rate invalid. [ 1.675028] ACPI: Battery Slot [BAT1] (battery present) [ 1.675250] Linux agpgart interface v0.103 [ 1.675506] [drm:i915_driver_load] Found LynxPoint LP PCH [ 1.675511] [drm:intel_power_domains_init] Allowed DC state mask 00 [ 1.675587] [drm:intel_device_info_dump] i915 device info: platform=HASWELL gen=7 pciid=0x0a16 rev=0x09 [ 1.675589] [drm:intel_device_info_dump] i915 device info: is_mobile: no [ 1.675590] [drm:intel_device_info_dump] i915 device info: is_lp: no [ 1.675592] [drm:intel_device_info_dump] i915 device info: is_alpha_support: no [ 1.675593] [drm:intel_device_info_dump] i915 device info: has_64bit_reloc: no [ 1.675594] [drm:intel_device_info_dump] i915 device info: has_aliasing_ppgtt: yes [ 1.675595] [drm:intel_device_info_dump] i915 device info: has_csr: no [ 1.675597] [drm:intel_device_info_dump] i915 device info: has_ddi: yes [ 1.675598] [drm:intel_device_info_dump] i915 device info: has_decoupled_mmio: no [ 1.675599] [drm:intel_device_info_dump] i915 device info: has_dp_mst: yes [ 1.675601] [drm:intel_device_info_dump] i915 device info: has_fbc: yes [ 1.675602] [drm:intel_device_info_dump] i915 device info: has_fpga_dbg: yes [ 1.675603] [drm:intel_device_info_dump] i915 device info: has_full_ppgtt: yes [ 1.675604] [drm:intel_device_info_dump] i915 device info: has_full_48bit_ppgtt: no [ 1.675606] [drm:intel_device_info_dump] i915 device info: has_gmbus_irq: yes [ 1.675607] [drm:intel_device_info_dump] i915 device info: has_gmch_display: no [ 1.675608] [drm:intel_device_info_dump] i915 device info: has_guc: no [ 1.675610] [drm:intel_device_info_dump] i915 device info: has_hotplug: yes [ 1.675611] [drm:intel_device_info_dump] i915 device info: has_hw_contexts: yes [ 1.675612] [drm:intel_device_info_dump] i915 device info: has_l3_dpf: yes [ 1.675613] [drm:intel_device_info_dump] i915 device info: has_llc: yes [ 1.675615] [drm:intel_device_info_dump] i915 device info: has_logical_ring_contexts: no [ 1.675616] [drm:intel_device_info_dump] i915 device info: has_overlay: no [ 1.675617] [drm:intel_device_info_dump] i915 device info: has_pipe_cxsr: no [ 1.675619] [drm:intel_device_info_dump] i915 device info: has_pooled_eu: no [ 1.675620] [drm:intel_device_info_dump] i915 device info: has_psr: yes [ 1.675621] [drm:intel_device_info_dump] i915 device info: has_rc6: yes [ 1.675622] [drm:intel_device_info_dump] i915 device info: has_rc6p: no [ 1.675624] [drm:intel_device_info_dump] i915 device info: has_resource_streamer: yes [ 1.675625] [drm:intel_device_info_dump] i915 device info: has_runtime_pm: yes [ 1.675626] [drm:intel_device_info_dump] i915 device info: has_snoop: no [ 1.675627] [drm:intel_device_info_dump] i915 device info: unfenced_needs_alignment: no [ 1.675629] [drm:intel_device_info_dump] i915 device info: cursor_needs_physical: no [ 1.675630] [drm:intel_device_info_dump] i915 device info: hws_needs_physical: no [ 1.675631] [drm:intel_device_info_dump] i915 device info: overlay_needs_physical: no [ 1.675632] [drm:intel_device_info_dump] i915 device info: supports_tv: no [ 1.675688] [drm:intel_device_info_runtime_init] slice mask: 0000 [ 1.675689] [drm:intel_device_info_runtime_init] slice total: 0 [ 1.675691] [drm:intel_device_info_runtime_init] subslice total: 0 [ 1.675692] [drm:intel_device_info_runtime_init] subslice mask 0000 [ 1.675693] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 1.675695] [drm:intel_device_info_runtime_init] EU total: 0 [ 1.675696] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 1.675697] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.675699] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 1.675700] [drm:intel_device_info_runtime_init] has EU power gating: n [ 1.675702] [drm:i915_driver_load] ppgtt mode: 1 [ 1.675704] [drm:i915_driver_load] use GPU semaphores? yes [ 1.675712] [drm] Memory usable by graphics device = 2048M [ 1.675751] [drm:i915_ggtt_probe_hw] GMADR size = 256M [ 1.675753] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M [ 1.675754] [drm] Replacing VGA console driver [ 1.676437] Console: switching to colour dummy device 80x25 [ 1.676499] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.676508] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9afb2018 [ 1.676515] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.676517] [drm:intel_opregion_setup] SWSCI supported [ 1.681935] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 1.681938] [drm:intel_opregion_setup] ASLE supported [ 1.681940] [drm:intel_opregion_setup] ASLE extension supported [ 1.681942] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 1.682002] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.682011] [drm] Driver supports precise vblank timestamp query. [ 1.682020] [drm:intel_bios_init] Set default to SSC at 120000 kHz [ 1.682022] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 176 [ 1.682026] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.682028] [drm:intel_bios_init] crt_ddc_bus_pin: 2 [ 1.683870] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0) [ 1.683874] [drm:intel_bios_init] Panel type: 2 (VBT) [ 1.683876] [drm:intel_bios_init] DRRS supported mode is seamless [ 1.683880] [drm:intel_bios_init] Found panel mode in BIOS VBT tables: [ 1.683885] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 69300 1366 1374 1384 1462 768 771 772 790 0x8 0xa [ 1.683887] [drm:intel_bios_init] VBT initial LVDS value 200300 [ 1.683890] [drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255, controller 0 [ 1.683894] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables: [ 1.683897] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.683899] [drm:intel_bios_init] No SDVO device info is found in VBT [ 1.683902] [drm:intel_bios_init] DRRS State Enabled:0 [ 1.683905] [drm:intel_bios_init] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.683907] [drm:intel_bios_init] VBT HDMI level shift for port A: 0 [ 1.683910] [drm:intel_bios_init] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.683912] [drm:intel_bios_init] VBT HDMI level shift for port B: 7 [ 1.683925] [drm:intel_dsm_detect] no _DSM method for intel device [ 1.683932] [drm:intel_dsm_detect] no _DSM method for intel device [ 1.683937] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [ 1.683943] [drm:intel_power_well_enable] enabling always-on [ 1.683945] [drm:intel_power_well_enable] enabling display [ 1.684191] [drm:intel_fbc_init] Sanitized enable_fbc value: 0 [ 1.684194] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.684196] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 1.684198] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 1.684200] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 1.684201] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.684203] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.684205] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 1.684207] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 1.684208] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 1.684210] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.684212] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.684213] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 1.684215] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 1.684217] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 1.684218] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.684223] [drm:intel_modeset_init] 3 display pipes available. [ 1.684249] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz, VCO: 0 kHz, ref: 0 kHz [ 1.684325] [drm:intel_update_max_cdclk] Max CD clock rate: 450000 kHz [ 1.684328] [drm:intel_update_max_cdclk] Max dotclock rate: 450000 kHz [ 1.684332] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 1.684652] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.684656] [drm:intel_dp_init_connector] using AUX A for port A (VBT) [ 1.684666] [drm:intel_pps_dump_state] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.684668] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.684671] [drm:intel_dp_init_panel_power_sequencer.part.16] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.684673] [drm:intel_dp_init_panel_power_sequencer.part.16] backlight on delay 1, off delay 200 [ 1.684680] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.684686] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.684693] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 1.685659] [drm:intel_dp_read_dpcd] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00 [ 1.686597] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 [ 1.692667] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.692669] [drm:intel_dp_init_connector] VBT doesn't support DRRS [ 1.692676] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 1.692686] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 1.692689] [drm:intel_hdmi_init_connector] Using DDC pin 0x5 for port B (VBT) [ 1.692692] [drm:intel_ddi_init] VBT says port C is not DVI/HDMI/DP compatible, respect it [ 1.692764] [drm:intel_set_plane_visible] pipe A active planes 0x0 [ 1.692767] [drm:intel_modeset_setup_hw_state] [CRTC:32:pipe A] hw state readout: enabled [ 1.692770] [drm:intel_set_plane_visible] pipe B active planes 0x0 [ 1.692772] [drm:intel_modeset_setup_hw_state] [CRTC:39:pipe B] hw state readout: disabled [ 1.692774] [drm:intel_set_plane_visible] pipe C active planes 0x0 [ 1.692776] [drm:intel_modeset_setup_hw_state] [CRTC:46:pipe C] hw state readout: disabled [ 1.692780] [drm:intel_modeset_setup_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 1.692782] [drm:intel_modeset_setup_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 1.692785] [drm:intel_modeset_setup_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 1.692787] [drm:intel_modeset_setup_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 1.692790] [drm:intel_modeset_setup_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 1.692792] [drm:intel_modeset_setup_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 1.692798] [drm:intel_modeset_setup_hw_state] [ENCODER:47:DDI A] hw state readout: enabled, pipe A [ 1.692801] [drm:intel_modeset_setup_hw_state] [ENCODER:56:DDI B] hw state readout: disabled, pipe A [ 1.692804] [drm:intel_modeset_setup_hw_state] [CONNECTOR:48:eDP-1] hw state readout: enabled [ 1.692807] [drm:intel_modeset_setup_hw_state] [CONNECTOR:57:HDMI-A-1] hw state readout: disabled [ 1.692819] [drm:intel_dump_pipe_config] [CRTC:32:pipe A][setup_hw_state] [ 1.692821] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0 [ 1.692824] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 2428257, gmch_n: 8388608, link_m: 134903, link_n: 524288, tu: 64 [ 1.692836] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.692838] [drm:intel_dump_pipe_config] requested mode: [ 1.692841] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69472 1366 1374 1384 1462 768 771 772 790 0x40 0x9 [ 1.692843] [drm:intel_dump_pipe_config] adjusted mode: [ 1.692846] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69472 1366 1374 1384 1462 768 771 772 790 0x40 0x9 [ 1.692848] [drm:intel_dump_pipe_config] crtc timings: 69472 1366 1374 1384 1462 768 771 772 790, type: 0x40 flags: 0x9 [ 1.692851] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 720x400, pixel rate 69472 [ 1.692853] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05560300, enabled [ 1.692854] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 1.692856] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x90280202 spll: 0x0 [ 1.692858] [drm:intel_dump_pipe_config] planes on this crtc [ 1.692860] [drm:intel_dump_pipe_config] [PLANE:26:primary A] disabled, scaler_id = 0 [ 1.692861] [drm:intel_dump_pipe_config] [PLANE:28:sprite A] disabled, scaler_id = 0 [ 1.692863] [drm:intel_dump_pipe_config] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 1.692866] [drm:intel_dump_pipe_config] [CRTC:39:pipe B][setup_hw_state] [ 1.692867] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 1.692869] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.692870] [drm:intel_dump_pipe_config] requested mode: [ 1.692873] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.692875] [drm:intel_dump_pipe_config] adjusted mode: [ 1.692877] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.692880] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.692882] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.692884] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.692885] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 1.692886] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 1.692888] [drm:intel_dump_pipe_config] planes on this crtc [ 1.692890] [drm:intel_dump_pipe_config] [PLANE:33:primary B] disabled, scaler_id = 0 [ 1.692891] [drm:intel_dump_pipe_config] [PLANE:35:sprite B] disabled, scaler_id = 0 [ 1.692893] [drm:intel_dump_pipe_config] [PLANE:37:cursor B] disabled, scaler_id = 0 [ 1.692895] [drm:intel_dump_pipe_config] [CRTC:46:pipe C][setup_hw_state] [ 1.692897] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 1.692899] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.692900] [drm:intel_dump_pipe_config] requested mode: [ 1.692903] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.692904] [drm:intel_dump_pipe_config] adjusted mode: [ 1.692907] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.692909] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.692911] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.692912] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.692914] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 1.692915] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 1.692917] [drm:intel_dump_pipe_config] planes on this crtc [ 1.692918] [drm:intel_dump_pipe_config] [PLANE:40:primary C] disabled, scaler_id = 0 [ 1.692920] [drm:intel_dump_pipe_config] [PLANE:42:sprite C] disabled, scaler_id = 0 [ 1.692922] [drm:intel_dump_pipe_config] [PLANE:44:cursor C] disabled, scaler_id = 0 [ 1.692925] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling [ 1.692927] [drm:intel_modeset_setup_hw_state] LCPLL 1350 enabled but not in use, disabling [ 1.692929] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling [ 1.693021] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 80000000] [ 1.695775] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00 [ 1.695777] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000 [ 1.695791] [drm:i915_gem_context_init] HW context support initialized [ 1.695879] [drm:intel_init_ring_buffer] rcs hws offset: 0x00001000 [ 1.695885] [drm:intel_engine_create_scratch] rcs pipe control offset: 0x7fdee000 [ 1.695915] [drm:intel_init_ring_buffer] bcs hws offset: 0x00022000 [ 1.695947] [drm:intel_init_ring_buffer] vcs hws offset: 0x00043000 [ 1.695990] [drm:intel_init_ring_buffer] vecs hws offset: 0x00064000 [ 1.696023] [drm:init_workarounds_ring] rcs: Number of context specific w/a: 0 [ 1.696073] [drm:intel_init_gt_powersave] Overclocking supported, max: 1100MHz, overclock: 1100MHz [ 1.696077] [drm:intel_fbdev_init] pipe A not active or no fb, skipping [ 1.696079] [drm:intel_fbdev_init] pipe B not active or no fb, skipping [ 1.696080] [drm:intel_fbdev_init] pipe C not active or no fb, skipping [ 1.696082] [drm:intel_fbdev_init] no active fbs found, not using BIOS config [ 1.696257] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.696262] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [ 1.696303] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 [ 1.696388] [drm:intel_opregion_register] 2 outputs detected [ 1.696451] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 1.697235] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 1.697246] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363) [ 1.697258] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP05.PEGP.DD02._BCL] (Node ffff88025699ede8), AE_NOT_FOUND (20170119/psparse-543) [ 1.697449] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input3 [ 1.698497] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.698618] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 1.698651] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 [ 1.698659] [drm:drm_setup_crtcs] [ 1.698663] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] [ 1.698667] [drm:intel_dp_detect] [CONNECTOR:48:eDP-1] [ 1.698671] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no [ 1.698674] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 1.698676] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.698678] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.699200] ahci 0000:00:1f.2: version 3.0 [ 1.699624] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 [ 1.700469] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] status updated from unknown to connected [ 1.700487] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.700492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] probed modes : [ 1.700496] [drm:drm_mode_debug_printmodeline] Modeline 49:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 1.700499] [drm:drm_mode_debug_printmodeline] Modeline 50:"1366x768" 40 69300 1366 1374 1384 1786 768 771 772 968 0x40 0x9 [ 1.700502] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] [ 1.700504] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-1] [ 1.701850] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.701852] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.703850] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.703853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.705848] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.705850] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.707883] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.707888] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1.707892] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] status updated from unknown to disconnected [ 1.707894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] disconnected [ 1.707897] [drm:drm_setup_crtcs] connector 48 enabled? yes [ 1.707899] [drm:drm_setup_crtcs] connector 57 enabled? no [ 1.707902] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.707904] [drm:drm_setup_crtcs] looking for cmdline mode on connector 48 [ 1.707906] [drm:drm_setup_crtcs] looking for preferred mode on connector 48 0 [ 1.707908] [drm:drm_setup_crtcs] found mode 1366x768 [ 1.707910] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.707913] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 32 (0,0) [ 1.707917] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.708367] [drm:intelfb_create] allocated 1366x768 fb: 0x00085000 [ 1.708425] fbcon: inteldrmfb (fb0) is primary device [ 1.708497] [drm:intel_atomic_check] [CONNECTOR:48:eDP-1] checking for sink bpp constrains [ 1.708499] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 18 [ 1.708503] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 69300KHz [ 1.708506] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 1.708508] [drm:intel_dp_compute_config] DP link bw required 155925 available 540000 [ 1.708511] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1.708513] [drm:intel_dump_pipe_config] [CRTC:32:pipe A][modeset] [ 1.708515] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 1.708518] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 302776, gmch_n: 1048576, link_m: 33642, link_n: 131072, tu: 64 [ 1.708519] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.708521] [drm:intel_dump_pipe_config] requested mode: [ 1.708524] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 1.708526] [drm:intel_dump_pipe_config] adjusted mode: [ 1.708529] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 1.708531] [drm:intel_dump_pipe_config] crtc timings: 69300 1366 1374 1384 1462 768 771 772 790, type: 0x48 flags: 0x9 [ 1.708534] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1366x768, pixel rate 69300 [ 1.708536] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.708537] [drm:intel_dump_pipe_config] ips: 1, double wide: 0 [ 1.708539] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x90280202 spll: 0x0 [ 1.708540] [drm:intel_dump_pipe_config] planes on this crtc [ 1.708542] [drm:intel_dump_pipe_config] [PLANE:26:primary A] disabled, scaler_id = 0 [ 1.708544] [drm:intel_dump_pipe_config] [PLANE:28:sprite A] disabled, scaler_id = 0 [ 1.708545] [drm:intel_dump_pipe_config] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 1.708551] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A [ 1.708568] [drm:intel_edp_backlight_off.part.27] [ 1.709474] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode [ 1.709477] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 1.709832] scsi host0: ahci [ 1.709948] scsi host1: ahci [ 1.710160] scsi host2: ahci [ 1.710234] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 44 [ 1.710235] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 44 [ 1.710236] ata3: DUMMY [ 1.710366] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.742286] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.742322] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.742601] mousedev: PS/2 mouse device common for all mice [ 1.742674] rtc_cmos 00:01: RTC can wake from S4 [ 1.742916] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.742944] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.742960] i2c /dev entries driver [ 1.743980] i801_smbus 0000:00:1f.3: An interrupt is pending! [ 1.743992] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.781548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.810686] Driver for 1-wire Dallas network protocol. [ 1.812214] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.812294] intel_pstate: Intel P-state driver initializing [ 1.812436] hidraw: raw HID events driver (C) Jiri Kosina [ 1.812804] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 1.813099] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.813175] arp_tables: arp_tables: (C) 2002 David S. Miller [ 1.813252] NET: Registered protocol family 10 [ 1.813470] Segment Routing with IPv6 [ 1.813485] NET: Registered protocol family 17 [ 1.813687] microcode: sig=0x40651, pf=0x40, revision=0x1f [ 1.813741] microcode: Microcode Update Driver: v2.2. [ 1.813748] AVX2 version of gcm_enc/dec engaged. [ 1.813748] AES CTR mode by8 optimization enabled [ 1.818611] registered taskstats version 1 [ 1.818623] zswap: loaded using pool lzo/zbud [ 1.819020] rtc_cmos 00:01: setting system clock to 2017-04-26 16:12:00 UTC (1493223120) [ 1.819051] PM: Hibernation image not present or could not be loaded. [ 1.915922] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.915926] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling [ 1.915936] [drm:intel_disable_pipe] disabling pipe A [ 1.924348] [drm:intel_edp_panel_off.part.25] Turn eDP port A panel power off [ 1.924353] [drm:intel_edp_panel_off.part.25] Wait for panel power off time [ 1.924361] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000000 [ 1.975898] [drm:wait_panel_status] Wait complete [ 1.975906] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 32 [ 1.975908] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 1.975916] [drm:intel_atomic_commit_tail] [ENCODER:47:DDI A] [ 1.975918] [drm:intel_atomic_commit_tail] [ENCODER:56:DDI B] [ 1.975920] [drm:verify_single_dpll_state.isra.113] WRPLL 1 [ 1.975922] [drm:verify_single_dpll_state.isra.113] WRPLL 2 [ 1.975923] [drm:verify_single_dpll_state.isra.113] SPLL [ 1.975925] [drm:verify_single_dpll_state.isra.113] LCPLL 810 [ 1.975927] [drm:verify_single_dpll_state.isra.113] LCPLL 1350 [ 1.975928] [drm:verify_single_dpll_state.isra.113] LCPLL 2700 [ 1.975931] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 32 [ 1.975932] [drm:intel_enable_shared_dpll] enabling LCPLL 1350 [ 1.975941] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.975944] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 2.017902] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.017919] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.018676] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133 [ 2.018678] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.019393] ata1.00: configured for UDMA/133 [ 2.019481] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8E2, 1.01, max UDMA/133 [ 2.020967] ata2.00: configured for UDMA/133 [ 2.467832] tsc: Refined TSC clocksource calibration: 2394.457 MHz [ 2.467837] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns [ 2.531887] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000 [ 2.565875] [drm:wait_panel_status] Wait complete [ 2.565880] [drm:edp_panel_on] Wait for panel power on [ 2.565888] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000003 [ 2.767862] [drm:wait_panel_status] Wait complete [ 2.767871] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 2.767877] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 2.769757] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.769759] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 2.769760] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 2.769762] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1 [ 2.771169] [drm:intel_dp_start_link_train] clock recovery OK [ 2.771171] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2 [ 2.772878] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful [ 2.772920] [drm:intel_enable_pipe] enabling pipe A [ 2.773343] [drm:intel_edp_backlight_on.part.26] [ 2.773346] [drm:intel_panel_enable_backlight] pipe A [ 2.773352] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.773357] [drm:intel_psr_enable] PSR not supported by this panel [ 2.773358] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 2.806848] [drm:intel_power_well_disable] disabling display [ 2.806851] [drm:hsw_set_power_well.constprop.14] Requesting to disable the power well [ 2.806855] [drm:verify_connector_state.isra.82] [CONNECTOR:48:eDP-1] [ 2.806861] [drm:intel_atomic_commit_tail] [CRTC:32:pipe A] [ 2.806871] [drm:verify_single_dpll_state.isra.113] LCPLL 1350 [ 2.825060] Console: switching to colour frame buffer device 170x48 [ 2.858159] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.860238] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A01 PQ: 0 ANSI: 5 [ 2.861099] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.861114] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.862458] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.862549] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8E2 1.01 PQ: 0 ANSI: 5 [ 2.863707] sd 0:0:0:0: [sda] Write Protect is off [ 2.864339] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.864344] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.888260] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.889303] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.890152] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.890219] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.891263] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754] [ 2.963205] sda: sda1 sda2 sda3 sda4 [ 2.964602] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.977719] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..] [ 3.099823] random: fast init done [ 3.139297] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x817394ea, board id: 2382, fw id: 1238635 [ 3.241577] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 3.283667] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities [ 3.285026] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities [ 3.324261] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 3.324969] VFS: Mounted root (ext4 filesystem) readonly on device 8:4. [ 3.363526] devtmpfs: mounted [ 3.365959] Freeing unused kernel memory: 1412K [ 3.366619] Write protecting the kernel read-only data: 14336k [ 3.367526] Freeing unused kernel memory: 584K [ 3.369107] Freeing unused kernel memory: 528K [ 3.427955] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 3.427967] [drm:sandybridge_pcode_read] warning: pcode (read) mailbox access failed: -6 [ 3.491894] clocksource: Switched to clocksource tsc [ 5.795768] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 5.795776] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 9.697980] udevd[644]: starting version 3.2.1 [ 10.383272] udevd[645]: starting eudev-3.2.1 [ 10.574322] wmi: Mapper loaded [ 10.695840] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 10.765078] ACPI: bus type USB registered [ 10.765105] usbcore: registered new interface driver usbfs [ 10.765113] usbcore: registered new interface driver hub [ 10.765148] usbcore: registered new device driver usb [ 10.766927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.768964] [drm] amdgpu kernel modesetting enabled. [ 10.768976] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 10.769048] ATPX version 1, functions 0x00000033 [ 10.769127] amdgpu 0000:03:00.0: enabling device (0000 -> 0003) [ 10.769244] [drm] initializing kernel modesetting (VERDE 0x1002:0x6823 0x1028:0x05EB 0x00). [ 10.769245] amdgpu 0000:03:00.0: VM size (-1) must be a power of 2 [ 10.769254] [drm] register mmio base: 0xC0500000 [ 10.769254] [drm] register mmio size: 262144 [ 10.769259] vga_switcheroo: enabled [ 10.776289] ehci-pci: EHCI PCI platform driver [ 10.776884] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 10.776888] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 10.776897] ehci-pci 0000:00:1d.0: debug port 2 [ 10.777484] ATOM BIOS: BR44591.001 [ 10.777493] [drm] GPU post is not needed [ 10.777819] [drm] vm size is 64 GB, block size is 13-bit [ 10.780291] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 10.780296] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 10.780782] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc90000c8e000, ec:f4:bb:8a:8d:91, XID 04900000 IRQ 45 [ 10.780786] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 10.780797] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc081c000 [ 10.781279] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 10.786057] iTCO_vendor_support: vendor-support=0 [ 10.787623] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 10.787958] hub 1-0:1.0: USB hub found [ 10.787969] hub 1-0:1.0: 2 ports detected [ 10.791405] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.791439] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 10.791534] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.843684] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.843690] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 10.844764] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 10.844768] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 10.844974] hub 2-0:1.0: USB hub found [ 10.844984] hub 2-0:1.0: 9 ports detected [ 10.846877] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.846881] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 10.847025] hub 3-0:1.0: USB hub found [ 10.847034] hub 3-0:1.0: 4 ports detected [ 10.893128] intel_rapl: Found RAPL domain package [ 10.893130] intel_rapl: Found RAPL domain core [ 10.893132] intel_rapl: Found RAPL domain uncore [ 10.893133] intel_rapl: Found RAPL domain dram [ 10.893136] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.934746] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 10.935391] [drm:intel_power_well_enable] enabling display [ 10.935394] [drm:hsw_set_power_well.constprop.14] Enabling power well [ 10.952458] [drm:i915_audio_component_get_eld] Not valid for port B [ 10.952460] [drm:i915_audio_component_get_eld] Not valid for port B [ 10.952461] [drm:i915_audio_component_get_eld] Not valid for port B [ 10.952463] [drm:i915_audio_component_get_eld] Not valid for port C [ 10.952464] [drm:i915_audio_component_get_eld] Not valid for port C [ 10.952465] [drm:i915_audio_component_get_eld] Not valid for port C [ 10.952466] [drm:i915_audio_component_get_eld] Not valid for port D [ 10.952467] [drm:i915_audio_component_get_eld] Not valid for port D [ 10.952468] [drm:i915_audio_component_get_eld] Not valid for port D [ 10.952979] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input8 [ 10.953045] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9 [ 10.953513] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10 [ 10.953601] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input11 [ 10.953657] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12 [ 10.982975] amdgpu 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 10.982977] amdgpu 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF [ 10.982986] [drm] Detected VRAM RAM=2048M, BAR=256M [ 10.982987] [drm] RAM width 128bits GDDR5 [ 10.983040] [TTM] Zone kernel: Available graphics memory: 4030094 kiB [ 10.983042] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 10.983042] [TTM] Initializing pool allocator [ 10.983046] [TTM] Initializing DMA pool allocator [ 10.983066] [drm] amdgpu: 2048M of VRAM memory ready [ 10.983067] [drm] amdgpu: 2048M of GTT memory ready. [ 10.983077] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 10.984932] amdgpu 0000:03:00.0: PCIE GART of 2048M enabled (table at 0x0000000000040000). [ 10.984952] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.984953] [drm] Driver supports precise vblank timestamp query. [ 10.984993] amdgpu 0000:03:00.0: amdgpu: using MSI. [ 10.985014] [drm] amdgpu: irq initialized. [ 11.041910] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 11.041912] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.041913] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.041913] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 11.041914] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 11.041915] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 11.041916] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 11.041917] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 11.099550] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 11.186103] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0 [ 11.186134] [drm] Internal thermal controller without fan control [ 11.186146] [drm] amdgpu: dpm initialized [ 11.186186] [drm] AMDGPU Display Connectors [ 11.207589] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ 11.218232] hub 1-1:1.0: USB hub found [ 11.218328] hub 1-1:1.0: 8 ports detected [ 11.381864] amdgpu 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000010, cpu addr 0xffff88024fe1c010 [ 11.381921] amdgpu 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000020, cpu addr 0xffff88024fe1c020 [ 11.381952] amdgpu 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000030, cpu addr 0xffff88024fe1c030 [ 11.381978] amdgpu 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000040, cpu addr 0xffff88024fe1c040 [ 11.382029] amdgpu 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000050, cpu addr 0xffff88024fe1c050 [ 11.382181] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0 [ 11.382184] [drm] PCIE gen 2 link speeds already enabled [ 11.393871] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.393928] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.393983] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.394035] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.394089] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.394125] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.491506] usb 1-1.5: new full-speed USB device number 3 using ehci-pci [ 11.540506] usb 2-2: new full-speed USB device number 3 using xhci_hcd [ 11.636500] usb 1-1.7: new high-speed USB device number 4 using ehci-pci [ 11.639086] [drm] ring test on 0 succeeded in 10 usecs [ 11.641096] [drm] ring test on 1 succeeded in 1 usecs [ 11.641104] [drm] ring test on 2 succeeded in 2 usecs [ 11.641111] [drm] ring test on 3 succeeded in 4 usecs [ 11.641119] [drm] ring test on 4 succeeded in 5 usecs [ 11.641340] [drm] ib test on ring 0 succeeded [ 11.641384] [drm] ib test on ring 1 succeeded [ 11.641442] [drm] ib test on ring 2 succeeded [ 11.641483] [drm] ib test on ring 3 succeeded [ 11.641523] [drm] ib test on ring 4 succeeded [ 11.734876] usbcore: registered new interface driver rtsx_usb [ 11.746746] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C31C.0001/input/input13 [ 11.779496] usb 1-1.8: new high-speed USB device number 5 using ehci-pci [ 11.798676] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0 [ 11.803859] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C31C.0002/input/input14 [ 11.855578] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1 [ 11.856671] input: Areson USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:E0FF:0005.0003/input/input15 [ 11.856762] hid-generic 0003:E0FF:0005.0003: input,hidraw2: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:14.0-2/input0 [ 11.858595] input: Areson USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:E0FF:0005.0004/input/input16 [ 11.876919] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 11.909159] Bluetooth: Core ver 2.22 [ 11.909172] NET: Registered protocol family 31 [ 11.909172] Bluetooth: HCI device and connection manager initialized [ 11.909176] Bluetooth: HCI socket layer initialized [ 11.909177] Bluetooth: L2CAP socket layer initialized [ 11.909181] Bluetooth: SCO socket layer initialized [ 11.910710] hid-generic 0003:E0FF:0005.0004: input,hiddev0,hidraw3: USB HID v1.00 Keyboard [Areson USB Device] on usb-0000:00:14.0-2/input1 [ 11.910735] usbcore: registered new interface driver usbhid [ 11.910736] usbhid: USB HID core driver [ 11.939507] [drm:drm_fb_helper_hotplug_event] [ 11.939517] [drm:drm_setup_crtcs] [ 11.939521] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] [ 11.939526] [drm:intel_dp_detect] [CONNECTOR:48:eDP-1] [ 11.939529] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no [ 11.939533] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 11.939535] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 11.939537] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 11.939542] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 11.939549] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 11.940482] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 [ 11.941380] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 11.941385] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] probed modes : [ 11.941388] [drm:drm_mode_debug_printmodeline] Modeline 49:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 11.941391] [drm:drm_mode_debug_printmodeline] Modeline 50:"1366x768" 40 69300 1366 1374 1384 1786 768 771 772 968 0x40 0x9 [ 11.941393] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] [ 11.941394] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-1] [ 11.942500] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 11.942502] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 11.944502] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 11.944504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 11.946503] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 11.946504] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 11.948501] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 11.948504] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 11.948507] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] disconnected [ 11.948510] [drm:drm_setup_crtcs] connector 48 enabled? yes [ 11.948511] [drm:drm_setup_crtcs] connector 57 enabled? no [ 11.948514] [drm:intel_fb_initial_config] Not using firmware configuration [ 11.948516] [drm:drm_setup_crtcs] looking for cmdline mode on connector 48 [ 11.948518] [drm:drm_setup_crtcs] looking for preferred mode on connector 48 0 [ 11.948520] [drm:drm_setup_crtcs] found mode 1366x768 [ 11.948521] [drm:drm_setup_crtcs] picking CRTCs for 1366x768 config [ 11.948525] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 32 (0,0) [ 12.053190] usbcore: registered new interface driver btusb [ 12.128568] [drm:amdgpu_acpi_init [amdgpu]] Call to ATCS verify_interface failed: -5 [ 12.128602] [drm:amdgpu_acpi_init [amdgpu]] Call to ATIF verify_interface failed: -5 [ 12.128615] [drm] Initialized amdgpu 3.13.0 20150101 for 0000:03:00.0 on minor 1 [ 12.166100] Bluetooth: hci0: BCM: chip id 70 [ 12.182183] Bluetooth: hci0: BCM43142A [ 12.182188] Bluetooth: hci0: BCM (001.001.011) build 0000 [ 12.941035] Bluetooth: hci0: BCM (001.001.011) build 0036 [ 12.957032] Bluetooth: hci0: Dell Wireless 1704 Bluetooth v4.0+HS [ 13.170233] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=281/937 [ 13.170237] [drm:intel_panel_actually_set_backlight] set backlight PWM = 315 [ 13.700173] EXT4-fs (sda4): re-mounted. Opts: (null) [ 13.887353] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 14.947474] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 14.947482] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 15.267558] r8169 0000:01:00.0 enp1s0: link down [ 15.267560] r8169 0000:01:00.0 enp1s0: link down [ 15.267617] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 16.953197] r8169 0000:01:00.0 enp1s0: link up [ 16.953205] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready