[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2016-04-01 [ 0.000000] Linux version 4.11.0-rc5-next-20170407-dirty (rafael@RPC) (gcc version 7.0.0-alpha20170219 20170219 (experimental) (Gentoo 7.0.0_alpha20170219) ) #29 SMP PREEMPT Thu Apr 27 16:24:45 CEST 2017 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc5-next-20170407-dirty root=/dev/sda4 ro drm.debug=14 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009aabefff] usable [ 0.000000] BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 3537/0PHTY0, BIOS A07 11/12/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7F80000000 write-back [ 0.000000] 7 base 025F600000 mask 7FFFE00000 uncachable [ 0.000000] 8 base 025F800000 mask 7FFF800000 uncachable [ 0.000000] 9 base 0260000000 mask 7FE0000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x021c8000, 0x021c8fff] PGTABLE [ 0.000000] BRK [0x021c9000, 0x021c9fff] PGTABLE [ 0.000000] BRK [0x021ca000, 0x021cafff] PGTABLE [ 0.000000] BRK [0x021cb000, 0x021cbfff] PGTABLE [ 0.000000] BRK [0x021cc000, 0x021ccfff] PGTABLE [ 0.000000] BRK [0x021cd000, 0x021cdfff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 DELL CL09 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000009AFF9000 00010C (v05 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: DSDT 0x000000009AFEA000 00B97B (v01 DELL CL09 00000000 ASL 00040000) [ 0.000000] ACPI: FACS 0x000000009AFB8000 000040 [ 0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: FPDT 0x000000009AFFB000 000044 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: ASF! 0x000000009AFFA000 0000A5 (v32 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: HPET 0x000000009AFF8000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: APIC 0x000000009AFF7000 00008C (v03 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: MCFG 0x000000009AFF6000 00003C (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFE9000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x000000009AFE7000 000028 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: LPIT 0x000000009AFE6000 000094 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: ASPT 0x000000009AFE4000 000034 (v07 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: DBGP 0x000000009AFE3000 000034 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFDD000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFDC000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFD8000 003517 (v01 COMPAL CRV ORB 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009AFD6000 001E3D (v01 COMPAL CRV ORB 00001000 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25f5f9000-0x25f5fcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000094d5ffff] [ 0.000000] node 0: [mem 0x0000000095d60000-0x000000009aabefff] [ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff] [ 0.000000] On node 0 totalpages: 2068572 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9771 pages used for memmap [ 0.000000] DMA32 zone: 625344 pages, LIFO batch:31 [ 0.000000] Normal zone: 22488 pages used for memmap [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 37 pages/cpu @ffff88025f200000 s111192 r8192 d32168 u262144 [ 0.000000] pcpu-alloc: s111192 r8192 d32168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036228 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc5-next-20170407-dirty root=/dev/sda4 ro drm.debug=14 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 8057672K/8274288K available (9532K kernel code, 1465K rwdata, 3528K rodata, 1404K init, 880K bss, 216616K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 35462 entries in 139 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:760 16 [ 0.000000] NO_HZ: Clearing 0 from nohz_full range for timekeeping [ 0.000000] NO_HZ: Full dynticks CPUs: 1-7. [ 0.000000] Note: kernel parameter 'rcu_nocbs=' contains nonexistent CPUs. [ 0.000000] Offload RCU callbacks from CPUs: 1-7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2394.590 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.18 BogoMIPS (lpj=2394590) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170119 [ 0.014028] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.014088] Security Framework initialized [ 0.014120] Yama: becoming mindful. [ 0.015612] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.016403] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016474] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016536] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016801] CPU: Physical Processor ID: 0 [ 0.016833] CPU: Processor Core ID: 0 [ 0.016868] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.016904] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.016947] mce: CPU supports 7 MCE banks [ 0.016988] CPU0: Thermal monitoring enabled (TM1) [ 0.017016] process: using mwait in idle threads [ 0.017052] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.017089] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.017284] Freeing SMP alternatives memory: 28K [ 0.018065] smpboot: Max logical packages: 4 [ 0.019422] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.029472] TSC deadline timer enabled [ 0.029474] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.033022] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.033132] ... version: 3 [ 0.033164] ... bit width: 48 [ 0.033196] ... generic registers: 4 [ 0.033228] ... value mask: 0000ffffffffffff [ 0.033263] ... max period: 00007fffffffffff [ 0.033297] ... fixed-purpose events: 3 [ 0.034001] ... event mask: 000000070000000f [ 0.038473] NMI watchdog: Disabling watchdog on nohz_full cores by default [ 0.040172] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.042014] smp: Bringing up secondary CPUs ... [ 0.050052] x86: Booting SMP configuration: [ 0.050085] .... node #0, CPUs: #1 #2 #3 [ 0.250023] smp: Brought up 1 node, 4 CPUs [ 0.250071] smpboot: Total of 4 processors activated (19181.28 BogoMIPS) [ 0.251126] sched_clock: Marking stable (251000000, 0)->(255904635, -4904635) [ 0.251469] devtmpfs: initialized [ 0.251670] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.251799] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.251871] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.251975] pinctrl core: initialized pinctrl subsystem [ 0.252176] NET: Registered protocol family 16 [ 0.252395] cpuidle: using governor ladder [ 0.252431] PCCT header not found. [ 0.252491] Simple Boot Flag at 0x44 set to 0x1 [ 0.252538] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.252596] ACPI: bus type PCI registered [ 0.252685] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.252787] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.252841] PCI: Using configuration type 1 for base access [ 0.252883] dmi type 0xB1 record - unknown flag [ 0.252959] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.254778] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.254818] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.255078] ACPI: Added _OSI(Module Device) [ 0.255112] ACPI: Added _OSI(Processor Device) [ 0.255146] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.255179] ACPI: Added _OSI(Processor Aggregator Device) [ 0.255442] ACPI: Executed 1 blocks of module-level executable AML code [ 0.261380] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.262446] ACPI: Dynamic OEM Table Load: [ 0.262487] ACPI: SSDT 0xFFFF8802555A1400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.262949] ACPI: Dynamic OEM Table Load: [ 0.262988] ACPI: SSDT 0xFFFF880255564000 0005AA (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.263493] ACPI: Dynamic OEM Table Load: [ 0.263530] ACPI: SSDT 0xFFFF880255600400 000119 (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.264692] ACPI : EC: EC started [ 0.264724] ACPI : EC: interrupt blocked [ 0.396396] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.396433] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.396491] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.396547] ACPI: Interpreter enabled [ 0.396615] ACPI: (supports S0 S3 S4 S5) [ 0.396647] ACPI: Using IOAPIC for interrupt routing [ 0.396711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.538670] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.538713] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.539363] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.539422] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.539911] PCI host bridge to bus 0000:00 [ 0.539946] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.539985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.540025] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.540082] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.540139] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.540183] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.540342] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.540355] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.540362] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.540368] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.540519] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.540530] pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit] [ 0.540707] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.540724] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit] [ 0.540790] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.540909] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.540983] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.541003] pci 0000:00:16.0: reg 0x10: [mem 0xc0818000-0xc081801f 64bit] [ 0.541075] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.542778] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.542795] pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit] [ 0.542866] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.543002] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400 [ 0.543071] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.543249] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.543323] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 0.543392] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.543564] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 [ 0.543632] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.543814] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.544729] pci 0000:00:1d.0: reg 0x10: [mem 0xc081c000-0xc081c3ff] [ 0.550168] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.550292] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.550367] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.550605] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.550618] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f] [ 0.550625] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097] [ 0.550632] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087] [ 0.550639] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093] [ 0.550646] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.550654] pci 0000:00:1f.2: reg 0x24: [mem 0xc081b000-0xc081b7ff] [ 0.550690] pci 0000:00:1f.2: PME# supported from D3hot [ 0.550815] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.550829] pci 0000:00:1f.3: reg 0x10: [mem 0xc0819000-0xc08190ff 64bit] [ 0.550849] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.551053] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.551086] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.551119] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc0700fff 64bit] [ 0.551155] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.551270] pci 0000:01:00.0: supports D1 D2 [ 0.551271] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.554176] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.554214] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.554217] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff] [ 0.554222] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.554307] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000 [ 0.554350] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0607fff 64bit] [ 0.554546] pci 0000:02:00.0: supports D1 D2 [ 0.554548] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.558748] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.558788] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff] [ 0.558863] pci 0000:03:00.0: [1002:6823] type 00 class 0x030000 [ 0.558891] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.558908] pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit] [ 0.558917] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff] [ 0.558935] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.559020] pci 0000:03:00.0: supports D1 D2 [ 0.559021] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.559095] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.561718] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.561755] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.561758] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff] [ 0.561762] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 1.333167] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.333261] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.333371] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.333462] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.333550] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.333659] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.333774] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.333863] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.334164] ACPI: Enabled 5 GPEs in block 00 to 7F [ 1.334256] ACPI : EC: interrupt unblocked [ 1.334295] ACPI : EC: event unblocked [ 1.334332] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.334389] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 1.334523] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.334561] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.334626] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.334685] pci 0000:03:00.0: vgaarb: bridge control possible [ 1.334722] pci 0000:00:02.0: vgaarb: no bridge control possible [ 1.334763] vgaarb: loaded [ 1.334859] SCSI subsystem initialized [ 1.334930] libata version 3.00 loaded. [ 1.334987] PCI: Using ACPI for IRQ routing [ 1.340989] PCI: pci_cache_line_size set to 64 bytes [ 1.341060] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 1.341061] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff] [ 1.341062] e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff] [ 1.341064] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 1.341065] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 1.341236] NetLabel: Initializing [ 1.341268] NetLabel: domain hash size = 128 [ 1.341301] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.341353] NetLabel: unlabeled traffic allowed by default [ 1.341479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.341524] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.343582] clocksource: Switched to clocksource hpet [ 1.357650] VFS: Disk quotas dquot_6.6.0 [ 1.357704] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.357829] pnp: PnP ACPI init [ 1.358011] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.358050] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 1.358087] system 00:00: [io 0xffff] has been reserved [ 1.358123] system 00:00: [io 0xffff] has been reserved [ 1.358159] system 00:00: [io 0xffff] has been reserved [ 1.358194] system 00:00: [io 0x1800-0x18fe] has been reserved [ 1.358232] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.358271] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.358324] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.358377] system 00:02: [io 0x1854-0x1857] has been reserved [ 1.358417] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.358457] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.358483] pnp 00:04: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active) [ 1.423755] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.423795] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.423835] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.423874] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.423913] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.423952] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.423991] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.424029] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 1.424069] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 1.424109] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.424148] system 00:05: [mem 0x9fa22000-0x9fa22fff] has been reserved [ 1.424187] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 1.424227] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.424826] pnp: PnP ACPI: found 6 devices [ 1.430944] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.431010] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 1.431098] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.431134] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 1.431175] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff] [ 1.431216] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.431278] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.431315] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff] [ 1.431363] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref] [ 1.431420] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.431455] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 1.431495] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff] [ 1.431536] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 1.431602] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.431604] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.431605] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.431607] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window] [ 1.431608] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 1.431610] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff] [ 1.431611] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.431612] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff] [ 1.431614] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 1.431615] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff] [ 1.431617] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 1.431741] NET: Registered protocol family 2 [ 1.431953] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.432139] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.432312] TCP: Hash tables configured (established 65536 bind 65536) [ 1.432384] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.432447] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.432545] NET: Registered protocol family 1 [ 1.432604] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.445723] PCI: CLS 64 bytes, default 64 [ 1.445737] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.445778] software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff] [ 1.445914] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 1.445973] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 1.446009] RAPL PMU: hw unit of domain package 2^-14 Joules [ 1.446044] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 1.446080] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 1.446660] Scanning for low memory corruption every 60 seconds [ 1.447483] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.448690] zbud: loaded [ 1.450115] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.450233] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.451480] SGI XFS with security attributes, no debug enabled [ 1.452536] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.452638] io scheduler noop registered [ 1.452671] io scheduler deadline registered [ 1.452710] io scheduler cfq registered (default) [ 1.452744] io scheduler mq-deadline registered [ 1.453424] pcieport 0000:00:1c.0: Signaling PME with IRQ 40 [ 1.453478] pcieport 0000:00:1c.3: Signaling PME with IRQ 41 [ 1.453528] pcieport 0000:00:1c.4: Signaling PME with IRQ 42 [ 1.453662] ACPI: AC Adapter [ACAD] (on-line) [ 1.453789] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0 [ 1.453857] ACPI: Lid Switch [LID0] [ 1.453918] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1 [ 1.453983] ACPI: Power Button [PWRB] [ 1.454057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.454114] ACPI: Power Button [PWRF] [ 1.454571] Monitor-Mwait will be used to enter C-1 state [ 1.454589] Monitor-Mwait will be used to enter C-2 state [ 1.456611] GHES: HEST is not enabled! [ 1.676669] [Firmware Bug]: battery: (dis)charge rate invalid. [ 1.676763] ACPI: Battery Slot [BAT1] (battery present) [ 1.676987] Linux agpgart interface v0.103 [ 1.677245] [drm:i915_driver_load] Found LynxPoint LP PCH [ 1.677250] [drm:intel_power_domains_init] Allowed DC state mask 00 [ 1.677328] [drm:intel_device_info_dump] i915 device info: platform=HASWELL gen=7 pciid=0x0a16 rev=0x09 [ 1.677330] [drm:intel_device_info_dump] i915 device info: is_mobile: no [ 1.677331] [drm:intel_device_info_dump] i915 device info: is_lp: no [ 1.677332] [drm:intel_device_info_dump] i915 device info: is_alpha_support: no [ 1.677334] [drm:intel_device_info_dump] i915 device info: has_64bit_reloc: no [ 1.677335] [drm:intel_device_info_dump] i915 device info: has_aliasing_ppgtt: yes [ 1.677336] [drm:intel_device_info_dump] i915 device info: has_csr: no [ 1.677337] [drm:intel_device_info_dump] i915 device info: has_ddi: yes [ 1.677338] [drm:intel_device_info_dump] i915 device info: has_decoupled_mmio: no [ 1.677339] [drm:intel_device_info_dump] i915 device info: has_dp_mst: yes [ 1.677340] [drm:intel_device_info_dump] i915 device info: has_fbc: yes [ 1.677342] [drm:intel_device_info_dump] i915 device info: has_fpga_dbg: yes [ 1.677343] [drm:intel_device_info_dump] i915 device info: has_full_ppgtt: yes [ 1.677344] [drm:intel_device_info_dump] i915 device info: has_full_48bit_ppgtt: no [ 1.677345] [drm:intel_device_info_dump] i915 device info: has_gmbus_irq: yes [ 1.677346] [drm:intel_device_info_dump] i915 device info: has_gmch_display: no [ 1.677347] [drm:intel_device_info_dump] i915 device info: has_guc: no [ 1.677349] [drm:intel_device_info_dump] i915 device info: has_hotplug: yes [ 1.677350] [drm:intel_device_info_dump] i915 device info: has_hw_contexts: yes [ 1.677351] [drm:intel_device_info_dump] i915 device info: has_l3_dpf: yes [ 1.677352] [drm:intel_device_info_dump] i915 device info: has_llc: yes [ 1.677353] [drm:intel_device_info_dump] i915 device info: has_logical_ring_contexts: no [ 1.677354] [drm:intel_device_info_dump] i915 device info: has_overlay: no [ 1.677356] [drm:intel_device_info_dump] i915 device info: has_pipe_cxsr: no [ 1.677357] [drm:intel_device_info_dump] i915 device info: has_pooled_eu: no [ 1.677358] [drm:intel_device_info_dump] i915 device info: has_psr: yes [ 1.677359] [drm:intel_device_info_dump] i915 device info: has_rc6: yes [ 1.677360] [drm:intel_device_info_dump] i915 device info: has_rc6p: no [ 1.677361] [drm:intel_device_info_dump] i915 device info: has_resource_streamer: yes [ 1.677362] [drm:intel_device_info_dump] i915 device info: has_runtime_pm: yes [ 1.677363] [drm:intel_device_info_dump] i915 device info: has_snoop: no [ 1.677365] [drm:intel_device_info_dump] i915 device info: unfenced_needs_alignment: no [ 1.677366] [drm:intel_device_info_dump] i915 device info: cursor_needs_physical: no [ 1.677367] [drm:intel_device_info_dump] i915 device info: hws_needs_physical: no [ 1.677368] [drm:intel_device_info_dump] i915 device info: overlay_needs_physical: no [ 1.677369] [drm:intel_device_info_dump] i915 device info: supports_tv: no [ 1.677424] [drm:intel_device_info_runtime_init] slice mask: 0000 [ 1.677425] [drm:intel_device_info_runtime_init] slice total: 0 [ 1.677427] [drm:intel_device_info_runtime_init] subslice total: 0 [ 1.677428] [drm:intel_device_info_runtime_init] subslice mask 0000 [ 1.677429] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 1.677430] [drm:intel_device_info_runtime_init] EU total: 0 [ 1.677431] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 1.677433] [drm:intel_device_info_runtime_init] has slice power gating: n [ 1.677434] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 1.677435] [drm:intel_device_info_runtime_init] has EU power gating: n [ 1.677437] [drm:i915_driver_load] ppgtt mode: 1 [ 1.677439] [drm:i915_driver_load] use GPU semaphores? yes [ 1.677447] [drm] Memory usable by graphics device = 2048M [ 1.677485] [drm:i915_ggtt_probe_hw] GMADR size = 256M [ 1.677486] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M [ 1.677488] [drm] Replacing VGA console driver [ 1.678174] Console: switching to colour dummy device 80x25 [ 1.678235] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.678243] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9afb2018 [ 1.678250] [drm:intel_opregion_setup] Public ACPI methods supported [ 1.678251] [drm:intel_opregion_setup] SWSCI supported [ 1.683673] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 1.683677] [drm:intel_opregion_setup] ASLE supported [ 1.683679] [drm:intel_opregion_setup] ASLE extension supported [ 1.683681] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 1.683742] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.683750] [drm] Driver supports precise vblank timestamp query. [ 1.683759] [drm:intel_bios_init] Set default to SSC at 120000 kHz [ 1.683762] [drm:intel_bios_init] VBT signature "$VBT HASWELL ", BDB version 176 [ 1.683765] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.683767] [drm:intel_bios_init] crt_ddc_bus_pin: 2 [ 1.685607] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0) [ 1.685610] [drm:intel_bios_init] Panel type: 2 (VBT) [ 1.685612] [drm:intel_bios_init] DRRS supported mode is seamless [ 1.685616] [drm:intel_bios_init] Found panel mode in BIOS VBT tables: [ 1.685620] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 69300 1366 1374 1384 1462 768 771 772 790 0x8 0xa [ 1.685622] [drm:intel_bios_init] VBT initial LVDS value 200300 [ 1.685625] [drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255, controller 0 [ 1.685628] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables: [ 1.685632] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.685634] [drm:intel_bios_init] No SDVO device info is found in VBT [ 1.685636] [drm:intel_bios_init] DRRS State Enabled:0 [ 1.685640] [drm:intel_bios_init] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.685642] [drm:intel_bios_init] VBT HDMI level shift for port A: 0 [ 1.685645] [drm:intel_bios_init] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.685647] [drm:intel_bios_init] VBT HDMI level shift for port B: 7 [ 1.685659] [drm:intel_dsm_detect] no _DSM method for intel device [ 1.685666] [drm:intel_dsm_detect] no _DSM method for intel device [ 1.685671] [drm:intel_update_rawclk] rawclk rate: 24000 kHz [ 1.685675] [drm:intel_power_well_enable] enabling always-on [ 1.685678] [drm:intel_power_well_enable] enabling display [ 1.685924] [drm:intel_fbc_init] Sanitized enable_fbc value: 0 [ 1.685928] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec) [ 1.685930] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 1.685931] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec) [ 1.685933] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec) [ 1.685934] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec) [ 1.685936] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec) [ 1.685938] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 1.685939] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec) [ 1.685941] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec) [ 1.685942] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec) [ 1.685944] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec) [ 1.685945] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 1.685947] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec) [ 1.685948] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec) [ 1.685950] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec) [ 1.685954] [drm:intel_modeset_init] 3 display pipes available. [ 1.685980] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz, VCO: 0 kHz, ref: 0 kHz [ 1.686056] [drm:intel_update_max_cdclk] Max CD clock rate: 450000 kHz [ 1.686059] [drm:intel_update_max_cdclk] Max dotclock rate: 450000 kHz [ 1.686063] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 1.686383] [drm:intel_dp_init_connector] Adding eDP connector on port A [ 1.686387] [drm:intel_dp_init_connector] using AUX A for port A (VBT) [ 1.686396] [drm:intel_pps_dump_state] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000 [ 1.686398] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000 [ 1.686401] [drm:intel_dp_init_panel_power_sequencer.part.16] panel power up delay 200, power down delay 50, power cycle delay 600 [ 1.686403] [drm:intel_dp_init_panel_power_sequencer.part.16] backlight on delay 1, off delay 200 [ 1.686410] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 [ 1.686416] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 1.686423] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 1.687390] [drm:intel_dp_read_dpcd] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00 [ 1.688329] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 [ 1.694406] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.694408] [drm:intel_dp_init_connector] VBT doesn't support DRRS [ 1.694415] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937 [ 1.694425] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B [ 1.694428] [drm:intel_hdmi_init_connector] Using DDC pin 0x5 for port B (VBT) [ 1.694431] [drm:intel_ddi_init] VBT says port C is not DVI/HDMI/DP compatible, respect it [ 1.694505] [drm:intel_set_plane_visible] pipe A active planes 0x0 [ 1.694508] [drm:intel_modeset_setup_hw_state] [CRTC:32:pipe A] hw state readout: enabled [ 1.694512] [drm:intel_set_plane_visible] pipe B active planes 0x0 [ 1.694514] [drm:intel_modeset_setup_hw_state] [CRTC:39:pipe B] hw state readout: disabled [ 1.694517] [drm:intel_set_plane_visible] pipe C active planes 0x0 [ 1.694519] [drm:intel_modeset_setup_hw_state] [CRTC:46:pipe C] hw state readout: disabled [ 1.694522] [drm:intel_modeset_setup_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1 [ 1.694525] [drm:intel_modeset_setup_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 1.694527] [drm:intel_modeset_setup_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 1.694530] [drm:intel_modeset_setup_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 1.694532] [drm:intel_modeset_setup_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1 [ 1.694534] [drm:intel_modeset_setup_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 1.694540] [drm:intel_modeset_setup_hw_state] [ENCODER:47:DDI A] hw state readout: enabled, pipe A [ 1.694543] [drm:intel_modeset_setup_hw_state] [ENCODER:56:DDI B] hw state readout: disabled, pipe A [ 1.694546] [drm:intel_modeset_setup_hw_state] [CONNECTOR:48:eDP-1] hw state readout: enabled [ 1.694549] [drm:intel_modeset_setup_hw_state] [CONNECTOR:57:HDMI-A-1] hw state readout: disabled [ 1.694572] [drm:intel_dump_pipe_config] [CRTC:32:pipe A][setup_hw_state] [ 1.694574] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0 [ 1.694577] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 2428257, gmch_n: 8388608, link_m: 134903, link_n: 524288, tu: 64 [ 1.694578] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.694580] [drm:intel_dump_pipe_config] requested mode: [ 1.694583] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69472 1366 1374 1384 1462 768 771 772 790 0x40 0x9 [ 1.694585] [drm:intel_dump_pipe_config] adjusted mode: [ 1.694587] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69472 1366 1374 1384 1462 768 771 772 790 0x40 0x9 [ 1.694590] [drm:intel_dump_pipe_config] crtc timings: 69472 1366 1374 1384 1462 768 771 772 790, type: 0x40 flags: 0x9 [ 1.694592] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 720x400, pixel rate 69472 [ 1.694594] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05560300, enabled [ 1.694596] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 1.694599] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x90280202 spll: 0x0 [ 1.694600] [drm:intel_dump_pipe_config] planes on this crtc [ 1.694602] [drm:intel_dump_pipe_config] [PLANE:26:primary A] disabled, scaler_id = 0 [ 1.694604] [drm:intel_dump_pipe_config] [PLANE:28:sprite A] disabled, scaler_id = 0 [ 1.694605] [drm:intel_dump_pipe_config] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 1.694607] [drm:intel_dump_pipe_config] [CRTC:39:pipe B][setup_hw_state] [ 1.694609] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 1.694611] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.694612] [drm:intel_dump_pipe_config] requested mode: [ 1.694615] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.694616] [drm:intel_dump_pipe_config] adjusted mode: [ 1.694618] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.694621] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.694623] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.694624] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.694626] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 1.694628] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 1.694630] [drm:intel_dump_pipe_config] planes on this crtc [ 1.694631] [drm:intel_dump_pipe_config] [PLANE:33:primary B] disabled, scaler_id = 0 [ 1.694633] [drm:intel_dump_pipe_config] [PLANE:35:sprite B] disabled, scaler_id = 0 [ 1.694634] [drm:intel_dump_pipe_config] [PLANE:37:cursor B] disabled, scaler_id = 0 [ 1.694636] [drm:intel_dump_pipe_config] [CRTC:46:pipe C][setup_hw_state] [ 1.694638] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 1.694640] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.694641] [drm:intel_dump_pipe_config] requested mode: [ 1.694643] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.694645] [drm:intel_dump_pipe_config] adjusted mode: [ 1.694647] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.694649] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.694651] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.694653] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.694654] [drm:intel_dump_pipe_config] ips: 0, double wide: 0 [ 1.694656] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 1.694658] [drm:intel_dump_pipe_config] planes on this crtc [ 1.694659] [drm:intel_dump_pipe_config] [PLANE:40:primary C] disabled, scaler_id = 0 [ 1.694661] [drm:intel_dump_pipe_config] [PLANE:42:sprite C] disabled, scaler_id = 0 [ 1.694662] [drm:intel_dump_pipe_config] [PLANE:44:cursor C] disabled, scaler_id = 0 [ 1.694665] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling [ 1.694667] [drm:intel_modeset_setup_hw_state] LCPLL 1350 enabled but not in use, disabling [ 1.694669] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling [ 1.694760] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 80000000] [ 1.696971] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00 [ 1.696973] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000 [ 1.696988] [drm:i915_gem_context_init] HW context support initialized [ 1.697073] [drm:intel_init_ring_buffer] rcs hws offset: 0x00001000 [ 1.697082] [drm:intel_engine_create_scratch] rcs pipe control offset: 0x7fdee000 [ 1.697112] [drm:intel_init_ring_buffer] bcs hws offset: 0x00022000 [ 1.697142] [drm:intel_init_ring_buffer] vcs hws offset: 0x00043000 [ 1.697185] [drm:intel_init_ring_buffer] vecs hws offset: 0x00064000 [ 1.697219] [drm:init_workarounds_ring] rcs: Number of context specific w/a: 0 [ 1.697268] [drm:intel_init_gt_powersave] Overclocking supported, max: 1100MHz, overclock: 1100MHz [ 1.697272] [drm:intel_fbdev_init] pipe A not active or no fb, skipping [ 1.697274] [drm:intel_fbdev_init] pipe B not active or no fb, skipping [ 1.697276] [drm:intel_fbdev_init] pipe C not active or no fb, skipping [ 1.697277] [drm:intel_fbdev_init] no active fbs found, not using BIOS config [ 1.697476] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered [ 1.697480] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1 [ 1.697518] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 [ 1.697615] [drm:intel_opregion_register] 2 outputs detected [ 1.697677] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 1.698450] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 1.698460] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363) [ 1.698472] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP05.PEGP.DD02._BCL] (Node ffff880256980de8), AE_NOT_FOUND (20170119/psparse-543) [ 1.698670] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input3 [ 1.699712] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.699835] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 1.699865] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 [ 1.699892] [drm:drm_setup_crtcs] [ 1.699897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] [ 1.699901] [drm:intel_dp_detect] [CONNECTOR:48:eDP-1] [ 1.699904] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no [ 1.699907] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 1.699909] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 1.699911] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 1.700386] ahci 0000:00:1f.2: version 3.0 [ 1.700857] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 [ 1.701704] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] status updated from unknown to connected [ 1.701720] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.701725] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] probed modes : [ 1.701729] [drm:drm_mode_debug_printmodeline] Modeline 49:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 1.701732] [drm:drm_mode_debug_printmodeline] Modeline 50:"1366x768" 40 69300 1366 1374 1384 1786 768 771 772 968 0x40 0x9 [ 1.701734] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] [ 1.701738] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-1] [ 1.703586] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.703588] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.705586] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.705589] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.707584] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.707585] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.709622] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.709626] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1.709629] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] status updated from unknown to disconnected [ 1.709632] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] disconnected [ 1.709635] [drm:drm_setup_crtcs] connector 48 enabled? yes [ 1.709636] [drm:drm_setup_crtcs] connector 57 enabled? no [ 1.709640] [drm:intel_fb_initial_config] Not using firmware configuration [ 1.709642] [drm:drm_setup_crtcs] looking for cmdline mode on connector 48 [ 1.709644] [drm:drm_setup_crtcs] looking for preferred mode on connector 48 0 [ 1.709645] [drm:drm_setup_crtcs] found mode 1366x768 [ 1.709647] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.709650] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 32 (0,0) [ 1.709654] [drm:intelfb_create] no BIOS fb, allocating a new one [ 1.710106] [drm:intelfb_create] allocated 1366x768 fb: 0x00085000 [ 1.710163] fbcon: inteldrmfb (fb0) is primary device [ 1.710235] [drm:intel_atomic_check] [CONNECTOR:48:eDP-1] checking for sink bpp constrains [ 1.710237] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 18 [ 1.710241] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 69300KHz [ 1.710244] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18 [ 1.710246] [drm:intel_dp_compute_config] DP link bw required 155925 available 540000 [ 1.710249] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 18, dithering: 1 [ 1.710251] [drm:intel_dump_pipe_config] [CRTC:32:pipe A][modeset] [ 1.710253] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1 [ 1.710255] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 302776, gmch_n: 1048576, link_m: 33642, link_n: 131072, tu: 64 [ 1.710256] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 1.710258] [drm:intel_dump_pipe_config] requested mode: [ 1.710261] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 1.710262] [drm:intel_dump_pipe_config] adjusted mode: [ 1.710265] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 1.710268] [drm:intel_dump_pipe_config] crtc timings: 69300 1366 1374 1384 1462 768 771 772 790, type: 0x48 flags: 0x9 [ 1.710270] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1366x768, pixel rate 69300 [ 1.710271] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.710273] [drm:intel_dump_pipe_config] ips: 1, double wide: 0 [ 1.710276] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x90280202 spll: 0x0 [ 1.710277] [drm:intel_dump_pipe_config] planes on this crtc [ 1.710279] [drm:intel_dump_pipe_config] [PLANE:26:primary A] disabled, scaler_id = 0 [ 1.710281] [drm:intel_dump_pipe_config] [PLANE:28:sprite A] disabled, scaler_id = 0 [ 1.710282] [drm:intel_dump_pipe_config] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 1.710289] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A [ 1.710305] [drm:intel_edp_backlight_off.part.26] [ 1.710667] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode [ 1.710670] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst [ 1.711026] scsi host0: ahci [ 1.711157] scsi host1: ahci [ 1.711390] scsi host2: ahci [ 1.711461] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 44 [ 1.711462] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 44 [ 1.711463] ata3: DUMMY [ 1.711594] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.741576] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.741613] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.741884] mousedev: PS/2 mouse device common for all mice [ 1.741952] rtc_cmos 00:01: RTC can wake from S4 [ 1.742177] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.742204] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.742218] i2c /dev entries driver [ 1.743224] i801_smbus 0000:00:1f.3: An interrupt is pending! [ 1.743236] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.775547] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.810613] Driver for 1-wire Dallas network protocol. [ 1.811501] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.811581] intel_pstate: Intel P-state driver initializing [ 1.811731] hidraw: raw HID events driver (C) Jiri Kosina [ 1.812111] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 1.812384] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.812466] arp_tables: arp_tables: (C) 2002 David S. Miller [ 1.812546] NET: Registered protocol family 10 [ 1.812774] Segment Routing with IPv6 [ 1.812789] NET: Registered protocol family 17 [ 1.813042] microcode: sig=0x40651, pf=0x40, revision=0x1f [ 1.813083] microcode: Microcode Update Driver: v2.2. [ 1.813093] AVX2 version of gcm_enc/dec engaged. [ 1.813093] AES CTR mode by8 optimization enabled [ 1.814386] registered taskstats version 1 [ 1.814404] zswap: loaded using pool lzo/zbud [ 1.814936] rtc_cmos 00:01: setting system clock to 2017-04-27 14:26:40 UTC (1493303200) [ 1.814981] PM: Hibernation image not present or could not be loaded. [ 1.917656] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 1.917660] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling [ 1.917670] [drm:intel_disable_pipe] disabling pipe A [ 1.922013] [drm:intel_edp_panel_off.part.24] Turn eDP port A panel power off [ 1.922017] [drm:intel_edp_panel_off.part.24] Wait for panel power off time [ 1.922025] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000000 [ 1.973557] [drm:wait_panel_status] Wait complete [ 1.973564] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 32 [ 1.973567] [drm:intel_disable_shared_dpll] disabling WRPLL 1 [ 1.973573] [drm:intel_atomic_commit_tail] [ENCODER:47:DDI A] [ 1.973575] [drm:intel_atomic_commit_tail] [ENCODER:56:DDI B] [ 1.973577] [drm:verify_single_dpll_state.isra.113] WRPLL 1 [ 1.973579] [drm:verify_single_dpll_state.isra.113] WRPLL 2 [ 1.973581] [drm:verify_single_dpll_state.isra.113] SPLL [ 1.973582] [drm:verify_single_dpll_state.isra.113] LCPLL 810 [ 1.973583] [drm:verify_single_dpll_state.isra.113] LCPLL 1350 [ 1.973584] [drm:verify_single_dpll_state.isra.113] LCPLL 2700 [ 1.973587] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 32 [ 1.973588] [drm:intel_enable_shared_dpll] enabling LCPLL 1350 [ 1.973597] [drm:edp_panel_on] Turn eDP port A panel power on [ 1.973599] [drm:wait_panel_power_cycle] Wait for panel power cycle [ 2.019372] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.019391] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.020055] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133 [ 2.020057] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.020772] ata1.00: configured for UDMA/133 [ 2.020934] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8E2, 1.01, max UDMA/133 [ 2.022173] ata2.00: configured for UDMA/133 [ 2.469587] tsc: Refined TSC clocksource calibration: 2394.457 MHz [ 2.469604] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns [ 2.533600] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000 [ 2.533603] [drm:wait_panel_status] Wait complete [ 2.533607] [drm:edp_panel_on] Wait for panel power on [ 2.533615] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000003 [ 2.735583] [drm:wait_panel_status] Wait complete [ 2.735593] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 2.735600] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b [ 2.737487] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 2.737489] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 2.737490] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 2.737492] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1 [ 2.738900] [drm:intel_dp_start_link_train] clock recovery OK [ 2.738902] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2 [ 2.740609] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful [ 2.740651] [drm:intel_enable_pipe] enabling pipe A [ 2.741074] [drm:intel_edp_backlight_on.part.25] [ 2.741076] [drm:intel_panel_enable_backlight] pipe A [ 2.741083] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937 [ 2.741092] [drm:intel_psr_enable] PSR not supported by this panel [ 2.741093] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS [ 2.774591] [drm:intel_power_well_disable] disabling display [ 2.774595] [drm:hsw_set_power_well.constprop.14] Requesting to disable the power well [ 2.774599] [drm:verify_connector_state.isra.82] [CONNECTOR:48:eDP-1] [ 2.774607] [drm:intel_atomic_commit_tail] [CRTC:32:pipe A] [ 2.774618] [drm:verify_single_dpll_state.isra.113] LCPLL 1350 [ 2.792991] Console: switching to colour frame buffer device 170x48 [ 2.828400] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.828647] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A01 PQ: 0 ANSI: 5 [ 2.830042] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.830099] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.831387] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.831544] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8E2 1.01 PQ: 0 ANSI: 5 [ 2.832655] sd 0:0:0:0: [sda] Write Protect is off [ 2.833258] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.833263] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.847051] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754] [ 2.859074] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.860130] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.861183] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.861244] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.924189] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..] [ 2.928405] sda: sda1 sda2 sda3 sda4 [ 2.929806] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.958303] random: fast init done [ 3.081273] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x8172a63a, board id: 2382, fw id: 1238635 [ 3.174341] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 3.226786] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities [ 3.228123] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities [ 3.267832] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 3.268529] VFS: Mounted root (ext4 filesystem) readonly on device 8:4. [ 3.306751] devtmpfs: mounted [ 3.309171] Freeing unused kernel memory: 1404K [ 3.309926] Write protecting the kernel read-only data: 14336k [ 3.310859] Freeing unused kernel memory: 688K [ 3.312495] Freeing unused kernel memory: 568K [ 3.429597] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on [ 3.429608] [drm:sandybridge_pcode_read] warning: pcode (read) mailbox access failed: -6 [ 3.477563] clocksource: Switched to clocksource tsc [ 5.797416] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 5.797423] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 9.751892] udevd[642]: starting version 3.2.1 [ 10.414898] udevd[643]: starting eudev-3.2.1 [ 10.588583] wmi: Mapper loaded [ 10.744417] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 10.786389] ACPI: bus type USB registered [ 10.786409] usbcore: registered new interface driver usbfs [ 10.786415] usbcore: registered new interface driver hub [ 10.786450] usbcore: registered new device driver usb [ 10.787727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.792921] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 10.792928] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 10.793311] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc90000c8e000, ec:f4:bb:8a:8d:91, XID 04900000 IRQ 45 [ 10.793749] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 10.800796] iTCO_vendor_support: vendor-support=0 [ 10.813285] ehci-pci: EHCI PCI platform driver [ 10.813469] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 10.813476] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 10.813488] ehci-pci 0000:00:1d.0: debug port 2 [ 10.817407] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 10.817415] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc081c000 [ 10.824505] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 10.824745] hub 1-0:1.0: USB hub found [ 10.824752] hub 1-0:1.0: 2 ports detected [ 10.828574] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.828607] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 10.828733] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.879125] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.879132] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 10.880197] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 10.880201] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 10.880401] hub 2-0:1.0: USB hub found [ 10.880410] hub 2-0:1.0: 9 ports detected [ 10.882111] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.882114] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 10.882214] hub 3-0:1.0: USB hub found [ 10.882220] hub 3-0:1.0: 4 ports detected [ 10.896630] [drm] amdgpu kernel modesetting enabled. [ 10.896643] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 10.896753] ATPX version 1, functions 0x00000033 [ 10.896835] amdgpu 0000:03:00.0: enabling device (0000 -> 0003) [ 10.896941] [drm] initializing kernel modesetting (VERDE 0x1002:0x6823 0x1028:0x05EB 0x00). [ 10.896951] [drm] register mmio base: 0xC0500000 [ 10.896951] [drm] register mmio size: 262144 [ 10.896956] vga_switcheroo: enabled [ 10.904558] ATOM BIOS: BR44591.001 [ 10.904565] [drm] GPU post is not needed [ 10.905072] [drm] vm size is 64 GB, block size is 13-bit [ 10.955788] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 10.956508] [drm:intel_power_well_enable] enabling display [ 10.956511] [drm:hsw_set_power_well.constprop.14] Enabling power well [ 10.989929] [drm:i915_audio_component_get_eld] Not valid for port B [ 10.989931] [drm:i915_audio_component_get_eld] Not valid for port B [ 10.989932] [drm:i915_audio_component_get_eld] Not valid for port B [ 10.989934] [drm:i915_audio_component_get_eld] Not valid for port C [ 10.989935] [drm:i915_audio_component_get_eld] Not valid for port C [ 10.989936] [drm:i915_audio_component_get_eld] Not valid for port C [ 10.989937] [drm:i915_audio_component_get_eld] Not valid for port D [ 10.989938] [drm:i915_audio_component_get_eld] Not valid for port D [ 10.989939] [drm:i915_audio_component_get_eld] Not valid for port D [ 10.990514] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input8 [ 10.990585] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9 [ 10.990644] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10 [ 10.990707] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input11 [ 10.990764] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12 [ 11.019109] intel_rapl: Found RAPL domain package [ 11.019112] intel_rapl: Found RAPL domain core [ 11.019113] intel_rapl: Found RAPL domain uncore [ 11.019114] intel_rapl: Found RAPL domain dram [ 11.019118] intel_rapl: RAPL package 0 domain package locked by BIOS [ 11.019864] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 11.019866] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.019868] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.019869] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 11.019870] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 11.019872] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 11.019874] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 11.019875] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 11.133112] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 11.249058] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ 11.251736] hub 1-1:1.0: USB hub found [ 11.251817] hub 1-1:1.0: 8 ports detected [ 11.258194] amdgpu 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 11.258196] amdgpu 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF [ 11.258207] [drm] Detected VRAM RAM=2048M, BAR=256M [ 11.258208] [drm] RAM width 128bits GDDR5 [ 11.258332] [TTM] Zone kernel: Available graphics memory: 4030180 kiB [ 11.258334] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 11.258334] [TTM] Initializing pool allocator [ 11.258339] [TTM] Initializing DMA pool allocator [ 11.258362] [drm] amdgpu: 2048M of VRAM memory ready [ 11.258363] [drm] amdgpu: 2048M of GTT memory ready. [ 11.258373] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 11.260105] amdgpu 0000:03:00.0: PCIE GART of 2048M enabled (table at 0x0000000000040000). [ 11.260123] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.260123] [drm] Driver supports precise vblank timestamp query. [ 11.260159] amdgpu 0000:03:00.0: amdgpu: using MSI. [ 11.260178] [drm] amdgpu: irq initialized. [ 11.339467] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0 [ 11.339494] [drm] Internal thermal controller without fan control [ 11.339510] [drm] amdgpu: dpm initialized [ 11.339540] [drm] AMDGPU Display Connectors [ 11.490734] amdgpu 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000010, cpu addr 0xffff880251197010 [ 11.490794] amdgpu 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000020, cpu addr 0xffff880251197020 [ 11.490839] amdgpu 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000030, cpu addr 0xffff880251197030 [ 11.490892] amdgpu 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000040, cpu addr 0xffff880251197040 [ 11.490946] amdgpu 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000050, cpu addr 0xffff880251197050 [ 11.491098] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0 [ 11.491102] [drm] PCIE gen 2 link speeds already enabled [ 11.502388] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.502440] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.502485] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.502527] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.502563] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.502598] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 11.525022] usb 1-1.5: new full-speed USB device number 3 using ehci-pci [ 11.581016] usb 2-2: new full-speed USB device number 3 using xhci_hcd [ 11.670013] usb 1-1.7: new high-speed USB device number 4 using ehci-pci [ 11.746798] [drm] ring test on 0 succeeded in 10 usecs [ 11.748812] [drm] ring test on 1 succeeded in 1 usecs [ 11.748820] [drm] ring test on 2 succeeded in 2 usecs [ 11.748828] [drm] ring test on 3 succeeded in 4 usecs [ 11.748835] [drm] ring test on 4 succeeded in 5 usecs [ 11.749088] [drm] ib test on ring 0 succeeded [ 11.749109] [drm] ib test on ring 1 succeeded [ 11.749131] [drm] ib test on ring 2 succeeded [ 11.749153] [drm] ib test on ring 3 succeeded [ 11.749187] [drm] ib test on ring 4 succeeded [ 11.762484] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C31C.0001/input/input13 [ 11.813009] usb 1-1.8: new high-speed USB device number 5 using ehci-pci [ 11.814166] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0 [ 11.819368] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C31C.0002/input/input14 [ 11.825467] usbcore: registered new interface driver rtsx_usb [ 11.854411] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 11.871110] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1 [ 11.872177] input: Areson USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:E0FF:0005.0003/input/input16 [ 11.872268] hid-generic 0003:E0FF:0005.0003: input,hidraw2: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:14.0-2/input0 [ 11.874025] input: Areson USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:E0FF:0005.0004/input/input17 [ 11.926258] hid-generic 0003:E0FF:0005.0004: input,hiddev0,hidraw3: USB HID v1.00 Keyboard [Areson USB Device] on usb-0000:00:14.0-2/input1 [ 11.926284] usbcore: registered new interface driver usbhid [ 11.926285] usbhid: USB HID core driver [ 11.941013] [drm:drm_fb_helper_hotplug_event] [ 11.941015] [drm:drm_setup_crtcs] [ 11.941018] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] [ 11.941022] [drm:intel_dp_detect] [CONNECTOR:48:eDP-1] [ 11.941026] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no [ 11.941029] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000 [ 11.941030] [drm:intel_dp_print_rates] sink rates: 162000, 270000 [ 11.941032] [drm:intel_dp_print_rates] common rates: 162000, 270000 [ 11.941038] [drm:edp_panel_vdd_on] Turning eDP port A VDD on [ 11.941048] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f [ 11.941987] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 [ 11.942891] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 11.942896] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] probed modes : [ 11.942899] [drm:drm_mode_debug_printmodeline] Modeline 49:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9 [ 11.942902] [drm:drm_mode_debug_printmodeline] Modeline 50:"1366x768" 40 69300 1366 1374 1384 1786 768 771 772 968 0x40 0x9 [ 11.942904] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] [ 11.942906] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-1] [ 11.944004] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 11.944005] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 11.946005] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 11.946007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 11.948005] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 11.948007] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 11.950005] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 11.950007] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 11.950010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] disconnected [ 11.950012] [drm:drm_setup_crtcs] connector 48 enabled? yes [ 11.950014] [drm:drm_setup_crtcs] connector 57 enabled? no [ 11.950017] [drm:intel_fb_initial_config] Not using firmware configuration [ 11.950019] [drm:drm_setup_crtcs] looking for cmdline mode on connector 48 [ 11.950020] [drm:drm_setup_crtcs] looking for preferred mode on connector 48 0 [ 11.950022] [drm:drm_setup_crtcs] found mode 1366x768 [ 11.950023] [drm:drm_setup_crtcs] picking CRTCs for 1366x768 config [ 11.950027] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 32 (0,0) [ 12.038633] Bluetooth: Core ver 2.22 [ 12.038647] NET: Registered protocol family 31 [ 12.038648] Bluetooth: HCI device and connection manager initialized [ 12.038650] Bluetooth: HCI socket layer initialized [ 12.038652] Bluetooth: L2CAP socket layer initialized [ 12.038656] Bluetooth: SCO socket layer initialized [ 12.122040] usbcore: registered new interface driver btusb [ 12.231651] Bluetooth: hci0: BCM: chip id 70 [ 12.233208] [drm:amdgpu_acpi_init [amdgpu]] Call to ATCS verify_interface failed: -5 [ 12.233242] [drm:amdgpu_acpi_init [amdgpu]] Call to ATIF verify_interface failed: -5 [ 12.233259] [drm] Initialized amdgpu 3.13.0 20150101 for 0000:03:00.0 on minor 1 [ 12.247795] Bluetooth: hci0: BCM43142A [ 12.247811] Bluetooth: hci0: BCM (001.001.011) build 0000 [ 12.990639] Bluetooth: hci0: BCM (001.001.011) build 0036 [ 13.006505] Bluetooth: hci0: Dell Wireless 1704 Bluetooth v4.0+HS [ 13.257092] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=281/937 [ 13.257096] [drm:intel_panel_actually_set_backlight] set backlight PWM = 315 [ 13.665288] EXT4-fs (sda4): re-mounted. Opts: (null) [ 13.841466] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 14.948905] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off [ 14.948913] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007 [ 15.317030] r8169 0000:01:00.0 enp1s0: link down [ 15.317032] r8169 0000:01:00.0 enp1s0: link down [ 15.317089] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 16.876239] r8169 0000:01:00.0 enp1s0: link up [ 16.876247] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready