[ 0.000000] Allocated 4096 bytes for 4 pacas at c00000000ffff000 [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12 [ 0.000000] Initializing hash mmu with SLB [ 0.000000] Linux version 4.11.0-gentoo (root@T800) (gcc version 5.4.0 (Gentoo 5.4.0-r3 p1.3, pie-0.6.5) ) #1 SMP Sun May 14 10:23:58 CEST 2017 [ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] DART IOMMU initialized for U3 type chipset [ 0.000000] Using PowerMac machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x200000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x0804806318100448 [ 0.000000] possible = 0x7f7fffff18500649 [ 0.000000] always = 0x0000000018100040 [ 0.000000] cpu_user_features = 0xdc080000 0x00000000 [ 0.000000] mmu_features = 0x0c008001 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] htab_address = 0xc000000278000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=722, gen1=723 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x280000000, Total RAM: 0x200000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2097152 [ 0.000000] free_area_init_node: node 0, pgdat c000000000822180, node_mem_map c00000026dfc6000 [ 0.000000] DMA zone: 40960 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 2097152 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 25 pages/cpu @c00000026de00000 s64024 r0 d38376 u524288 [ 0.000000] pcpu-alloc: s64024 r0 d38376 u524288 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2056192 [ 0.000000] Kernel command line: ro root=/dev/sda8 init=/usr/lib/systemd/systemd [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 8054868K/8388608K available (6792K kernel code, 920K rwdata, 848K rodata, 348K init, 361K bss, 333740K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 2 CPUs [ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 124 sources [ 0.000000] /u3@0,f8000000/mpic@f8040000: hooking up to IRQ 56 [ 0.000000] time_init: decrementer frequency = 33.333333 MHz [ 0.000000] time_init: processor frequency = 2300.000000 MHz [ 0.000003] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns [ 0.000782] clocksource: timebase mult[1e000005] shift[24] registered [ 0.001461] clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.001516] Console: colour dummy device 80x25 [ 0.002142] console [tty0] enabled [ 0.002743] bootconsole [udbg0] disabled [ 0.003362] pid_max: default: 32768 minimum: 301 [ 0.003412] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003417] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004649] PowerMac SMP probe found 2 cpus [ 0.004770] KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000 [ 0.004776] channel 0 bus [ 0.004780] channel 1 bus [ 0.004867] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000 [ 0.004872] channel 0 bus [ 0.004905] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c [ 0.004909] channel 1 bus [ 0.004918] channel 2 bus [ 0.004966] Processor timebase sync using Pulsar i2c clock [ 0.004970] mpic: requesting IPIs... [ 0.005132] PPC970/FX/MP performance monitor hardware support registered [ 0.005332] smp: Bringing up secondary CPUs ... [ 0.042477] smp: Brought up 1 node, 2 CPUs [ 0.043748] devtmpfs: initialized [ 0.046634] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.046649] futex hash table entries: 512 (order: 4, 65536 bytes) [ 0.046724] xor: measuring software checksum speed [ 0.079197] 8regs : 6026.400 MB/sec [ 0.112549] 8regs_prefetch: 5156.400 MB/sec [ 0.145901] 32regs : 6318.000 MB/sec [ 0.179254] 32regs_prefetch: 5217.600 MB/sec [ 0.212608] altivec : 8948.400 MB/sec [ 0.212612] xor: using function: altivec (8948.400 MB/sec) [ 0.212767] NET: Registered protocol family 16 [ 0.213469] PCI: Probing PCI hardware [ 0.213630] PCI host bridge to bus 0000:f0 [ 0.213638] pci_bus 0000:f0: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff]) [ 0.213644] pci_bus 0000:f0: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.213649] pci_bus 0000:f0: root bus resource [mem 0x90000000-0xafffffff] [ 0.213654] pci_bus 0000:f0: root bus resource [bus f0-ff] [ 0.213661] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to ff [ 0.213681] pci 0000:f0:0b.0: [106b:0059] type 00 class 0x060000 [ 0.213807] pci 0000:f0:10.0: [1002:4150] type 00 class 0x030000 [ 0.213823] pci 0000:f0:10.0: reg 0x10: [mem 0xa0000000-0xafffffff pref] [ 0.213832] pci 0000:f0:10.0: reg 0x14: [io 0x10400-0x104ff] [ 0.213840] pci 0000:f0:10.0: reg 0x18: [mem 0x90000000-0x9000ffff] [ 0.213866] pci 0000:f0:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref] [ 0.213897] pci 0000:f0:10.0: supports D1 D2 [ 0.215609] IOMMU table initialized, virtual merging enabled [ 0.215693] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to f0 [ 0.215814] PCI host bridge to bus 0001:00 [ 0.215820] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff]) [ 0.215826] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff] [ 0.215831] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff] [ 0.215835] pci_bus 0001:00: root bus resource [mem 0xb0000000-0xefffffff] [ 0.215840] pci_bus 0001:00: root bus resource [bus 00-ef] [ 0.215847] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff [ 0.215866] pci 0001:00:00.0: [106b:0057] type 00 class 0x060000 [ 0.215968] pci 0001:00:01.0: [1022:7450] type 01 class 0x060400 [ 0.216062] pci 0001:00:02.0: [1022:7450] type 01 class 0x060400 [ 0.216148] pci 0001:00:03.0: [106b:0045] type 01 class 0x060400 [ 0.216251] pci 0001:00:04.0: [106b:0046] type 01 class 0x060400 [ 0.216349] pci 0001:00:05.0: [106b:0047] type 01 class 0x060400 [ 0.216446] pci 0001:00:06.0: [106b:0048] type 01 class 0x060400 [ 0.216543] pci 0001:00:07.0: [106b:0049] type 01 class 0x060400 [ 0.216703] pci 0001:00:01.0: PCI bridge to [bus 06] [ 0.216757] pci 0001:00:02.0: PCI bridge to [bus 07] [ 0.216824] pci 0001:01:07.0: [106b:0041] type 00 class 0xff0000 [ 0.216835] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.216933] pci 0001:01:08.0: [106b:0040] type 00 class 0x0c0310 [ 0.216945] pci 0001:01:08.0: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.217033] pci 0001:01:09.0: [106b:0040] type 00 class 0x0c0310 [ 0.217044] pci 0001:01:09.0: reg 0x10: [mem 0x80080000-0x80080fff] [ 0.217128] pci 0001:00:03.0: PCI bridge to [bus 01] [ 0.217139] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff] [ 0.217143] pci 0001:00:03.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.217255] pci 0001:02:0b.0: [1033:0035] type 00 class 0x0c0310 [ 0.217268] pci 0001:02:0b.0: reg 0x10: [mem 0x80102000-0x80102fff] [ 0.217326] pci 0001:02:0b.0: supports D1 D2 [ 0.217329] pci 0001:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217390] pci 0001:02:0b.1: [1033:0035] type 00 class 0x0c0310 [ 0.217404] pci 0001:02:0b.1: reg 0x10: [mem 0x80101000-0x80101fff] [ 0.217461] pci 0001:02:0b.1: supports D1 D2 [ 0.217463] pci 0001:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217521] pci 0001:02:0b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.217535] pci 0001:02:0b.2: reg 0x10: [mem 0x80100000-0x801000ff] [ 0.217592] pci 0001:02:0b.2: supports D1 D2 [ 0.217595] pci 0001:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217646] pci 0001:00:04.0: PCI bridge to [bus 02] [ 0.217658] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff] [ 0.217663] pci 0001:00:04.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.217755] pci 0001:03:0d.0: [106b:0043] type 00 class 0xff0000 [ 0.217765] pci 0001:03:0d.0: reg 0x10: [mem 0x80204000-0x80207fff] [ 0.217857] pci 0001:03:0e.0: [106b:0042] type 00 class 0x0c0010 [ 0.217869] pci 0001:03:0e.0: reg 0x10: [mem 0x80200000-0x80200fff] [ 0.217922] pci 0001:03:0e.0: supports D1 D2 [ 0.217924] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.217973] pci 0001:00:05.0: PCI bridge to [bus 03] [ 0.217984] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff] [ 0.217988] pci 0001:00:05.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.218077] pci 0001:04:0f.0: [106b:004c] type 00 class 0x020000 [ 0.218089] pci 0001:04:0f.0: reg 0x10: [mem 0x80400000-0x805fffff] [ 0.218123] pci 0001:04:0f.0: reg 0x30: [mem 0x80300000-0x803fffff pref] [ 0.218175] pci 0001:00:06.0: PCI bridge to [bus 04] [ 0.218186] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff] [ 0.218191] pci 0001:00:06.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.218264] pci 0001:05:0c.0: [1166:0240] type 00 class 0x01018f [ 0.218275] pci 0001:05:0c.0: reg 0x10: [io 0x811000-0x811007] [ 0.218283] pci 0001:05:0c.0: reg 0x14: [io 0x811000-0x811003] [ 0.218290] pci 0001:05:0c.0: reg 0x18: [io 0x811000-0x811007] [ 0.218297] pci 0001:05:0c.0: reg 0x1c: [io 0x811000-0x811003] [ 0.218304] pci 0001:05:0c.0: reg 0x20: [io 0x811000-0x81100f] [ 0.218312] pci 0001:05:0c.0: reg 0x24: [mem 0x80600000-0x80601fff] [ 0.218377] pci 0001:00:07.0: PCI bridge to [bus 05] [ 0.218388] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff] [ 0.218392] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.218436] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 07 [ 0.218526] PCI 0000:f0 Cannot reserve Legacy IO [io 0x10000-0x10fff] [ 0.218533] pci_bus 0000:f0: resource 4 [io 0x10000-0x80ffff] [ 0.218536] pci_bus 0000:f0: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.218538] pci_bus 0000:f0: resource 6 [mem 0x90000000-0xafffffff] [ 0.218572] pci 0001:00:01.0: PCI bridge to [bus 06] [ 0.218580] pci 0001:00:02.0: PCI bridge to [bus 07] [ 0.218587] pci 0001:00:03.0: PCI bridge to [bus 01] [ 0.218592] pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff] [ 0.218598] pci 0001:00:04.0: PCI bridge to [bus 02] [ 0.218603] pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff] [ 0.218610] pci 0001:00:05.0: PCI bridge to [bus 03] [ 0.218615] pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff] [ 0.218621] pci 0001:00:06.0: PCI bridge to [bus 04] [ 0.218626] pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff] [ 0.218632] pci 0001:00:07.0: PCI bridge to [bus 05] [ 0.218638] pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff] [ 0.218644] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff] [ 0.218647] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff] [ 0.218649] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff] [ 0.218651] pci_bus 0001:00: resource 7 [mem 0xb0000000-0xefffffff] [ 0.218654] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.218657] pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff] [ 0.218659] pci_bus 0001:03: resource 1 [mem 0x80200000-0x802fffff] [ 0.218662] pci_bus 0001:04: resource 1 [mem 0x80300000-0x805fffff] [ 0.218664] pci_bus 0001:05: resource 1 [mem 0x80600000-0x806fffff] [ 0.218666] PCI: Probing PCI hardware done [ 0.276023] raid6: altivecx1 gen() 3475 MB/s [ 0.332730] raid6: altivecx2 gen() 4380 MB/s [ 0.389426] raid6: altivecx4 gen() 5557 MB/s [ 0.446130] raid6: altivecx8 gen() 5711 MB/s [ 0.502844] raid6: int64x1 gen() 1364 MB/s [ 0.559539] raid6: int64x1 xor() 751 MB/s [ 0.616250] raid6: int64x2 gen() 1950 MB/s [ 0.672949] raid6: int64x2 xor() 1279 MB/s [ 0.729654] raid6: int64x4 gen() 2128 MB/s [ 0.786345] raid6: int64x4 xor() 1600 MB/s [ 0.843038] raid6: int64x8 gen() 2019 MB/s [ 0.899730] raid6: int64x8 xor() 1412 MB/s [ 0.899733] raid6: using algorithm altivecx8 gen() 5711 MB/s [ 0.899736] raid6: using intx1 recovery algorithm [ 0.899858] pci 0000:f0:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.899878] pci 0000:f0:10.0: vgaarb: bridge control possible [ 0.899880] vgaarb: loaded [ 0.899969] SCSI subsystem initialized [ 0.900066] libata version 3.00 loaded. [ 0.900287] clocksource: Switched to clocksource timebase [ 0.907543] NET: Registered protocol family 2 [ 0.907877] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.908209] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.909441] TCP: Hash tables configured (established 65536 bind 65536) [ 0.909582] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.909705] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.909921] NET: Registered protocol family 1 [ 0.909954] PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.909964] pci 0001:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.909970] pci 0001:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.909976] pci 0001:00:02.0: MSI quirk detected; subordinate MSI disabled [ 0.909981] pci 0001:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.910014] pci 0001:01:08.0: enabling device (0000 -> 0002) [ 0.963671] pci 0001:01:09.0: enabling device (0000 -> 0002) [ 1.020303] pci 0001:02:0b.0: enabling device (0000 -> 0002) [ 1.076964] pci 0001:02:0b.1: enabling device (0000 -> 0002) [ 1.133630] pci 0001:02:0b.2: enabling device (0004 -> 0006) [ 1.134348] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.137235] NET: Registered protocol family 38 [ 1.137290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.137295] io scheduler noop registered [ 1.137298] io scheduler deadline registered (default) [ 1.137658] Using unsupported 1920x1080 ATY,Piton_A at a0008000, depth=8, pitch=2048 [ 1.177300] Console: switching to colour frame buffer device 240x67 [ 1.216639] fb0: Open Firmware frame buffer device on /pci@0,f0000000/ATY,PitonParent@10/ATY,Piton_A@0 [ 1.216922] Using unsupported 800x600 ATY,Piton_B at a4008000, depth=8, pitch=1024 [ 1.217127] checking generic (a0008000 21c000) vs hw (a4008000 96000) [ 1.217228] fb1: Open Firmware frame buffer device on /pci@0,f0000000/ATY,PitonParent@10/ATY,Piton_B@1 [ 1.217614] MacIO PCI driver attached to K2 chipset [ 1.218559] sata_svw 0001:05:0c.0: version 2.3 [ 1.219204] scsi host0: sata_svw [ 1.219388] random: fast init done [ 1.219521] scsi host1: sata_svw [ 1.219725] scsi host2: sata_svw [ 1.219932] scsi host3: sata_svw [ 1.220054] ata1: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 17 [ 1.220232] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 17 [ 1.220432] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 17 [ 1.220608] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 17 [ 1.220904] pata-pci-macio 0001:03:0d.0: enabling device (0014 -> 0016) [ 1.236972] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset K2 ATA-6, Apple bus ID 3 [ 1.237483] scsi host4: pata_macio [ 1.237627] ata5: PATA max UDMA/100 irq 39 [ 1.238162] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 1.275947] pmac64_cpufreq: Registering G5 CPU frequency driver [ 1.276093] pmac64_cpufreq: Frequency method: i2c/pfunc, Voltage method: i2c/pfunc [ 1.276282] pmac64_cpufreq: Low: 1800 Mhz, High: 2300 Mhz, Cur: 1800 MHz [ 1.276771] NET: Registered protocol family 10 [ 1.277423] Segment Routing with IPv6 [ 1.277827] registered taskstats version 1 [ 1.278572] Btrfs loaded, crc32c=crc32c-generic [ 1.278713] BTRFS: selftest: sectorsize: 4096 nodesize: 4096 [ 1.278847] BTRFS: selftest: Running btrfs free space cache tests [ 1.279002] BTRFS: selftest: Running extent only tests [ 1.279129] BTRFS: selftest: Running bitmap only tests [ 1.279255] BTRFS: selftest: Running bitmap and extent tests [ 1.279397] BTRFS: selftest: Running space stealing from bitmap to extent [ 1.280113] BTRFS: selftest: Free space cache tests finished [ 1.280244] BTRFS: selftest: Running extent buffer operation tests [ 1.280419] BTRFS: selftest: Running btrfs_split_item tests [ 1.280577] BTRFS: selftest: Running extent I/O tests [ 1.280689] BTRFS: selftest: Running find delalloc tests [ 1.399624] ata5.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS0B, max UDMA/66 [ 1.404533] ata5.00: configured for UDMA/66 [ 1.485025] BTRFS: selftest: Running extent buffer bitmap tests [ 1.541488] BTRFS: selftest: Extent I/O tests finished [ 1.541598] BTRFS: selftest: Running btrfs_get_extent tests [ 1.541831] BTRFS: selftest: Running hole first btrfs_get_extent test [ 1.544105] ata1: SATA link down (SStatus 4 SControl 300) [ 1.555811] BTRFS: selftest: Running outstanding_extents tests [ 1.562832] BTRFS: selftest: Running qgroup tests [ 1.569693] BTRFS: selftest: Qgroup basic add [ 1.576490] BTRFS: selftest: Qgroup multiple refs test [ 1.583234] BTRFS: selftest: Running free space tree tests [ 1.623850] BTRFS: selftest: sectorsize: 4096 nodesize: 8192 [ 1.630436] BTRFS: selftest: Running btrfs free space cache tests [ 1.636990] BTRFS: selftest: Running extent only tests [ 1.643441] BTRFS: selftest: Running bitmap only tests [ 1.649813] BTRFS: selftest: Running bitmap and extent tests [ 1.656126] BTRFS: selftest: Running space stealing from bitmap to extent [ 1.662874] BTRFS: selftest: Free space cache tests finished [ 1.669147] BTRFS: selftest: Running extent buffer operation tests [ 1.675518] BTRFS: selftest: Running btrfs_split_item tests [ 1.681946] BTRFS: selftest: Running extent I/O tests [ 1.688396] BTRFS: selftest: Running find delalloc tests [ 1.856502] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.865700] ata2.00: ATA-9: WDC WD5000AZRZ-00HTKB0, 01.01A01, max UDMA/133 [ 1.872241] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.881505] ata2.00: configured for UDMA/133 [ 1.888191] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AZRZ-0 1A01 PQ: 0 ANSI: 5 [ 1.895137] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.895390] BTRFS: selftest: Running extent buffer bitmap tests [ 1.908224] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.914846] sd 1:0:0:0: [sda] Write Protect is off [ 1.921094] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.921122] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.952444] BTRFS: selftest: Extent I/O tests finished [ 1.958598] BTRFS: selftest: Running btrfs_get_extent tests [ 1.964817] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 [ 1.965508] BTRFS: selftest: Running hole first btrfs_get_extent test [ 1.965524] BTRFS: selftest: Running outstanding_extents tests [ 1.965556] BTRFS: selftest: Running qgroup tests [ 1.965558] BTRFS: selftest: Qgroup basic add [ 1.965594] BTRFS: selftest: Qgroup multiple refs test [ 1.965653] BTRFS: selftest: Running free space tree tests [ 1.999813] BTRFS: selftest: sectorsize: 4096 nodesize: 16384 [ 1.999815] BTRFS: selftest: Running btrfs free space cache tests [ 1.999818] BTRFS: selftest: Running extent only tests [ 1.999825] BTRFS: selftest: Running bitmap only tests [ 1.999837] BTRFS: selftest: Running bitmap and extent tests [ 1.999846] BTRFS: selftest: Running space stealing from bitmap to extent [ 2.000268] BTRFS: selftest: Free space cache tests finished [ 2.000269] BTRFS: selftest: Running extent buffer operation tests [ 2.000269] BTRFS: selftest: Running btrfs_split_item tests [ 2.000287] BTRFS: selftest: Running extent I/O tests [ 2.000287] BTRFS: selftest: Running find delalloc tests [ 2.078550] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.202501] BTRFS: selftest: Running extent buffer bitmap tests [ 2.244125] ata3: SATA link down (SStatus 4 SControl 300) [ 2.265001] BTRFS: selftest: Extent I/O tests finished [ 2.271005] BTRFS: selftest: Running btrfs_get_extent tests [ 2.277204] BTRFS: selftest: Running hole first btrfs_get_extent test [ 2.283330] BTRFS: selftest: Running outstanding_extents tests [ 2.289480] BTRFS: selftest: Running qgroup tests [ 2.295540] BTRFS: selftest: Qgroup basic add [ 2.301576] BTRFS: selftest: Qgroup multiple refs test [ 2.307614] BTRFS: selftest: Running free space tree tests [ 2.347953] BTRFS: selftest: sectorsize: 4096 nodesize: 32768 [ 2.353976] BTRFS: selftest: Running btrfs free space cache tests [ 2.360054] BTRFS: selftest: Running extent only tests [ 2.366036] BTRFS: selftest: Running bitmap only tests [ 2.371929] BTRFS: selftest: Running bitmap and extent tests [ 2.377749] BTRFS: selftest: Running space stealing from bitmap to extent [ 2.384031] BTRFS: selftest: Free space cache tests finished [ 2.389865] BTRFS: selftest: Running extent buffer operation tests [ 2.395730] BTRFS: selftest: Running btrfs_split_item tests [ 2.401537] BTRFS: selftest: Running extent I/O tests [ 2.407250] BTRFS: selftest: Running find delalloc tests [ 2.574549] ata4: SATA link down (SStatus 4 SControl 300) [ 2.581549] scsi 4:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1693S KS0B PQ: 0 ANSI: 5 [ 2.587562] ata5.00: K2/Shasta alignment limits applied [ 2.630702] BTRFS: selftest: Running extent buffer bitmap tests [ 2.693174] BTRFS: selftest: Extent I/O tests finished [ 2.699189] BTRFS: selftest: Running btrfs_get_extent tests [ 2.705319] BTRFS: selftest: Running hole first btrfs_get_extent test [ 2.711447] BTRFS: selftest: Running outstanding_extents tests [ 2.717598] BTRFS: selftest: Running qgroup tests [ 2.723661] BTRFS: selftest: Qgroup basic add [ 2.729701] BTRFS: selftest: Qgroup multiple refs test [ 2.735750] BTRFS: selftest: Running free space tree tests [ 2.775838] BTRFS: selftest: sectorsize: 4096 nodesize: 65536 [ 2.781865] BTRFS: selftest: Running btrfs free space cache tests [ 2.787942] BTRFS: selftest: Running extent only tests [ 2.793932] BTRFS: selftest: Running bitmap only tests [ 2.799804] BTRFS: selftest: Running bitmap and extent tests [ 2.805597] BTRFS: selftest: Running space stealing from bitmap to extent [ 2.811808] BTRFS: selftest: Free space cache tests finished [ 2.817508] BTRFS: selftest: Running extent buffer operation tests [ 2.823154] BTRFS: selftest: Running btrfs_split_item tests [ 2.828721] BTRFS: selftest: Running extent I/O tests [ 2.834189] BTRFS: selftest: Running find delalloc tests [ 3.038688] BTRFS: selftest: Running extent buffer bitmap tests [ 3.100404] BTRFS: selftest: Extent I/O tests finished [ 3.105682] BTRFS: selftest: Running btrfs_get_extent tests [ 3.111084] BTRFS: selftest: Running hole first btrfs_get_extent test [ 3.116340] BTRFS: selftest: Running outstanding_extents tests [ 3.121497] BTRFS: selftest: Running qgroup tests [ 3.126587] BTRFS: selftest: Qgroup basic add [ 3.131684] BTRFS: selftest: Qgroup multiple refs test [ 3.136824] BTRFS: selftest: Running free space tree tests [ 3.176462] input: PMU as /devices/virtual/input/input0 [ 3.181896] rtc-generic rtc-generic: setting system clock to 2017-05-14 09:54:32 UTC (1494755672) [ 3.188182] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 3.194606] ### dt-test ### start of unittest - you will see error messages [ 3.200446] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 3.206373] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 3.212268] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 3.218084] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 3.223803] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 3.229520] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property [ 3.235586] irq: no irq domain found for /testcase-data/interrupts/intc0 ! [ 3.242863] OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 3.248889] OF: overlay: overlay #5 is not topmost [ 3.256520] ### dt-test ### end of unittest - 148 passed, 0 failed [ 3.280870] EXT4-fs (sda8): couldn't mount as ext3 due to feature incompatibilities [ 3.287347] EXT4-fs (sda8): couldn't mount as ext2 due to feature incompatibilities [ 3.294418] EXT4-fs (sda8): INFO: recovery required on readonly filesystem [ 3.300435] EXT4-fs (sda8): write access will be enabled during recovery [ 3.895642] EXT4-fs (sda8): orphan cleanup on readonly fs [ 3.902009] EXT4-fs (sda8): 4 orphan inodes deleted [ 3.908027] EXT4-fs (sda8): recovery complete [ 4.125286] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 4.131474] VFS: Mounted root (ext4 filesystem) readonly on device 8:8. [ 4.137915] Freeing unused kernel memory: 348K [ 4.144129] This architecture does not have kernel memory protection. [ 5.093892] systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN default-hierarchy=hybrid) [ 5.101304] systemd[1]: Detected architecture ppc64. [ 5.142747] systemd[1]: Set hostname to . [ 6.619181] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.634246] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.649531] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.664767] systemd[1]: Reached target Paths. [ 6.680518] systemd[1]: Created slice User and Session Slice. [ 6.710580] systemd[1]: Listening on Process Core Dump Socket. [ 6.726419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.182627] EDAC MC: Ver: 3.0.0 [ 7.230266] IBM CPC925 EDAC driver Ver: 1.0.0 [ 7.239057] (c) 2008 Wind River Systems, Inc [ 7.253535] PowerMac i2c bus pmu 2 registered [ 7.262238] PowerMac i2c bus pmu 1 registered [ 7.270750] PowerMac i2c bus mac-io 0 registered [ 7.279401] PowerMac i2c bus u3 1 registered [ 7.287651] i2c i2c-3: i2c-powermac: modalias failure on /u3@0,f8000000/i2c@f8001000/cereal@1c0 [ 7.299364] PowerMac i2c bus u3 0 registered [ 7.588323] zram: Added device: zram0 [ 7.597549] zram: Added device: zram1 [ 7.606148] zram: Added device: zram2 [ 7.774854] zram0: detected capacity change from 0 to 2147483648 [ 7.837260] Adding 2097148k swap on /dev/zram0. Priority:16383 extents:1 across:2097148k SS [ 7.891747] EXT4-fs (sda8): re-mounted. Opts: (null) [ 7.997583] systemd-journald[85]: Received request to flush runtime journal from PID 1 [ 8.216861] systemd-journald[85]: File /var/log/journal/15de4a91845efdb338b900e757d16f92/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 10.318064] snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a [ 10.319145] snd-aoa-fabric-layout: Using PMF GPIOs [ 10.321977] snd-aoa-fabric-layout: can use this codec [ 10.405771] Linux agpgart interface v0.103 [ 10.444063] shpchp 0001:00:01.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 10.451976] shpchp 0001:00:01.0: Cannot reserve MMIO region [ 10.457247] agpgart-uninorth 0000:f0:0b.0: Apple U3H chipset [ 10.463348] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64 [ 10.465557] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0 [ 10.483264] shpchp 0001:00:02.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 10.491122] shpchp 0001:00:02.0: Cannot reserve MMIO region [ 10.505032] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.599082] sungem.c:v1.0 David S. Miller [ 10.609217] usbcore: registered new interface driver usbfs [ 10.610504] gem 0001:04:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:62:f2:38 [ 10.625805] usbcore: registered new interface driver hub [ 10.628168] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 10.646992] usbcore: registered new device driver usb [ 10.659786] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 10.667634] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 10.676865] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 10.680417] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 10.699432] windfarm: Initializing for desktop G5 with 2 chips [ 10.756393] windfarm: CPUs control loops started. [ 10.764578] wf_pm72: Backside control loop started. [ 10.772700] wf_pm72: Drive bay control loop started. [ 10.779510] gem 0001:04:0f.0 enP1p4s15f0: renamed from eth0 [ 10.859867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.893436] [drm] radeon kernel modesetting enabled. [ 10.901705] checking generic (a0008000 21c000) vs hw (a0000000 10000000) [ 10.901707] fb: switching to radeondrmfb from OFfb ATY,Piton_ [ 10.909933] Console: switching to colour dummy device 80x25 [ 10.910474] checking generic (a4008000 96000) vs hw (a0000000 10000000) [ 10.910476] fb: switching to radeondrmfb from OFfb ATY,Piton_ [ 10.910716] radeon 0000:f0:10.0: enabling device (0006 -> 0007) [ 10.910979] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x4150 0x00). [ 10.911022] [drm] register mmio base: 0x90000000 [ 10.911025] [drm] register mmio size: 65536 [ 10.911078] radeon 0000:f0:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff [ 11.016727] [drm] Not an x86 BIOS ROM, not using. [ 11.016774] [drm] Using device-tree clock info [ 11.016812] agpgart-uninorth 0000:f0:0b.0: putting AGP V3 device into 8x mode [ 11.016821] radeon 0000:f0:10.0: putting AGP V3 device into 8x mode [ 11.016895] radeon 0000:f0:10.0: GTT: 256M 0x00000000 - 0x0FFFFFFF [ 11.016901] [drm] Generation 2 PCI interface, using max accessible memory [ 11.016907] radeon 0000:f0:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (128M used) [ 11.016956] [drm] Detected VRAM RAM=256M, BAR=256M [ 11.016960] [drm] RAM width 128bits DDR [ 11.017144] [TTM] Zone kernel: Available graphics memory: 4027608 kiB [ 11.017149] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 11.017158] [TTM] Initializing pool allocator [ 11.017258] [drm] radeon: 128M of VRAM memory ready [ 11.017263] [drm] radeon: 256M of GTT memory ready. [ 11.017337] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 11.017454] radeon 0000:f0:10.0: WB disabled [ 11.017471] radeon 0000:f0:10.0: fence driver on ring 0 use gpu addr 0x0000000000000000 and cpu addr 0xd0000000018e9000 [ 11.017487] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.017491] [drm] Driver supports precise vblank timestamp query. [ 11.017530] [drm] radeon: irq initialized. [ 11.017542] [drm] Loading R300 Microcode [ 11.035170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.035652] ehci-pci: EHCI PCI platform driver [ 11.035755] ehci-pci 0001:02:0b.2: EHCI Host Controller [ 11.035775] ehci-pci 0001:02:0b.2: new USB bus registered, assigned bus number 1 [ 11.035857] ehci-pci 0001:02:0b.2: irq 63, io mem 0x80100000 [ 11.046967] ehci-pci 0001:02:0b.2: USB 2.0 started, EHCI 1.00 [ 11.047398] hub 1-0:1.0: USB hub found [ 11.047423] hub 1-0:1.0: 5 ports detected [ 11.093208] ohci-pci: OHCI PCI platform driver [ 11.093286] ohci-pci 0001:01:08.0: OHCI PCI host controller [ 11.093300] ohci-pci 0001:01:08.0: new USB bus registered, assigned bus number 2 [ 11.093368] ohci-pci 0001:01:08.0: irq 27, io mem 0x80081000 [ 11.168425] hub 2-0:1.0: USB hub found [ 11.168472] hub 2-0:1.0: 2 ports detected [ 11.169077] ohci-pci 0001:01:09.0: OHCI PCI host controller [ 11.169097] ohci-pci 0001:01:09.0: new USB bus registered, assigned bus number 3 [ 11.169179] ohci-pci 0001:01:09.0: irq 28, io mem 0x80080000 [ 11.207131] firewire_core 0001:03:0e.0: created device fw0: GUID 000d93fffe62f238, S800 [ 11.244573] hub 3-0:1.0: USB hub found [ 11.244611] hub 3-0:1.0: 2 ports detected [ 11.244822] ohci-pci 0001:02:0b.0: OHCI PCI host controller [ 11.244836] ohci-pci 0001:02:0b.0: new USB bus registered, assigned bus number 4 [ 11.244891] ohci-pci 0001:02:0b.0: irq 63, io mem 0x80102000 [ 11.320538] hub 4-0:1.0: USB hub found [ 11.320566] hub 4-0:1.0: 3 ports detected [ 11.320837] ohci-pci 0001:02:0b.1: OHCI PCI host controller [ 11.320854] ohci-pci 0001:02:0b.1: new USB bus registered, assigned bus number 5 [ 11.320919] ohci-pci 0001:02:0b.1: irq 63, io mem 0x80101000 [ 11.367032] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 11.397236] hub 5-0:1.0: USB hub found [ 11.397265] hub 5-0:1.0: 2 ports detected [ 11.504816] hub 1-1:1.0: USB hub found [ 11.504998] hub 1-1:1.0: 4 ports detected [ 11.548871] [drm] radeon: ring at 0x0000000000001000 [ 11.548926] [drm] ring test succeeded in 0 usecs [ 11.549507] [drm] ib test succeeded in 0 usecs [ 11.550703] [drm] Connector Table: 12 (mac g5 9600) [ 11.550738] [drm] No valid Ext TMDS info found in BIOS [ 11.550748] [drm] No TV DAC info found in BIOS [ 11.550891] [drm] No TMDS info found in BIOS [ 11.551024] [drm] Radeon Display Connectors [ 11.551029] [drm] Connector 0: [ 11.551032] [drm] DVI-I-1 [ 11.551036] [drm] HPD1 [ 11.551040] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 11.551044] [drm] Encoders: [ 11.551048] [drm] DFP2: INTERNAL_DVO1 [ 11.551052] [drm] CRT2: INTERNAL_DAC2 [ 11.551055] [drm] Connector 1: [ 11.551058] [drm] DVI-I-2 [ 11.551061] [drm] HPD2 [ 11.551064] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 11.551068] [drm] Encoders: [ 11.551071] [drm] DFP1: INTERNAL_TMDS1 [ 11.551074] [drm] CRT1: INTERNAL_DAC1 [ 11.551077] [drm] Connector 2: [ 11.551080] [drm] SVIDEO-1 [ 11.551083] [drm] Encoders: [ 11.551086] [drm] TV1: INTERNAL_DAC2 [ 11.664588] [drm] fb mappable at 0xA0040000 [ 11.664602] [drm] vram apper at 0xA0000000 [ 11.664606] [drm] size 8294400 [ 11.664609] [drm] fb depth is 24 [ 11.664613] [drm] pitch is 7680 [ 11.718851] Console: switching to colour frame buffer device 240x67 [ 11.764643] radeon 0000:f0:10.0: fb0: radeondrmfb frame buffer device [ 11.764869] [drm] Initialized radeon 2.49.0 20080528 for 0000:f0:10.0 on minor 0 [ 11.793642] usb 1-1.3: new full-speed USB device number 3 using ehci-pci [ 11.881572] Adding 8391612k swap on /dev/sda2. Priority:-1 extents:1 across:8391612k [ 12.000326] usb 1-1.4: new low-speed USB device number 4 using ehci-pci [ 13.329426] hidraw: raw HID events driver (C) Jiri Kosina [ 13.401088] usbcore: registered new interface driver usbhid [ 13.401250] usbhid: USB HID core driver [ 13.440832] input: Logitech G100s Optical Gaming Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C247.0001/input/input1 [ 13.441502] hid-generic 0003:046D:C247.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G100s Optical Gaming Mouse] on usb-0001:02:0b.2-1.3/input0 [ 13.442358] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.4/1-1.4:1.0/0003:046A:010D.0002/input/input2 [ 13.497191] hid-generic 0003:046A:010D.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0001:02:0b.2-1.4/input0 [ 13.499843] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.4/1-1.4:1.1/0003:046A:010D.0003/input/input3 [ 13.553850] hid-generic 0003:046A:010D.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:010d] on usb-0001:02:0b.2-1.4/input1 [ 15.753684] random: crng init done [ 15.835873] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 15.847131] EXT4-fs (sda4): mounted filesystem without journal. Opts: (null) [ 21.719151] zram1: detected capacity change from 0 to 8589934592 [ 22.085450] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 23.678725] IPv6: ADDRCONF(NETDEV_UP): enP1p4s15f0: link is not ready [ 23.743977] sungem_phy: PHY ID: 2062e0, addr: 1 [ 23.744233] gem 0001:04:0f.0 enP1p4s15f0: Found BCM5421-K2 PHY [ 23.755842] IPv6: ADDRCONF(NETDEV_UP): enP1p4s15f0: link is not ready [ 27.420455] gem 0001:04:0f.0 enP1p4s15f0: Link is up at 1000 Mbps, full-duplex [ 27.420582] gem 0001:04:0f.0 enP1p4s15f0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) [ 27.420622] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p4s15f0: link becomes ready [ 27.551600] NET: Registered protocol family 17 [ 31.699384] usb 1-1: USB disconnect, device number 2 [ 31.699394] usb 1-1.3: USB disconnect, device number 3 [ 31.714220] usb 1-1.4: USB disconnect, device number 4 [ 52.570896] systemd-journald[85]: File /var/log/journal/15de4a91845efdb338b900e757d16f92/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 210.104305] usb 1-1: new high-speed USB device number 5 using ehci-pci [ 210.244764] hub 1-1:1.0: USB hub found [ 210.245299] hub 1-1:1.0: 4 ports detected [ 210.541123] usb 1-1.3: new full-speed USB device number 6 using ehci-pci [ 210.661055] input: Logitech G100s Optical Gaming Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C247.0004/input/input4 [ 210.661352] hid-generic 0003:046D:C247.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech G100s Optical Gaming Mouse] on usb-0001:02:0b.2-1.3/input0 [ 210.751211] usb 1-1.4: new low-speed USB device number 7 using ehci-pci [ 210.892278] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.4/1-1.4:1.0/0003:046A:010D.0005/input/input5 [ 210.948148] hid-generic 0003:046A:010D.0005: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0001:02:0b.2-1.4/input0 [ 210.955270] input: HID 046a:010d as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-1/1-1.4/1-1.4:1.1/0003:046A:010D.0006/input/input6 [ 211.011520] hid-generic 0003:046A:010D.0006: input,hidraw2: USB HID v1.11 Device [HID 046a:010d] on usb-0001:02:0b.2-1.4/input1 [ 227.708350] fuse init (API version 7.26) [ 295.760807] radeon 0000:f0:10.0: ring 0 stalled for more than 10133msec [ 295.760818] radeon 0000:f0:10.0: GPU lockup (current fence id 0x00000000000016d5 last fence id 0x00000000000016df on ring 0) [ 295.912956] Failed to wait GUI idle while programming pipes. Bad things might happen. [ 295.914021] radeon 0000:f0:10.0: Saved 347 dwords of commands on ring 0. [ 295.914035] radeon 0000:f0:10.0: (r300_asic_reset:425) RBBM_STATUS=0x80010140 [ 296.414026] radeon 0000:f0:10.0: (r300_asic_reset:444) RBBM_STATUS=0x80010140 [ 296.910023] radeon 0000:f0:10.0: (r300_asic_reset:456) RBBM_STATUS=0x00000140 [ 296.910054] radeon 0000:f0:10.0: GPU reset succeed [ 296.910058] radeon 0000:f0:10.0: GPU reset succeeded, trying to resume [ 296.910098] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 296.910105] radeon 0000:f0:10.0: WB disabled [ 296.910111] radeon 0000:f0:10.0: fence driver on ring 0 use gpu addr 0x0000000000000000 and cpu addr 0xd0000000018e9000 [ 296.910203] [drm] radeon: ring at 0x0000000000001000 [ 296.910274] [drm] ring test succeeded in 0 usecs [ 296.963794] [drm] ib test succeeded in 0 usecs [ 310.126964] usb 1-1: USB disconnect, device number 5 [ 310.126974] usb 1-1.3: USB disconnect, device number 6 [ 310.143823] usb 1-1.4: USB disconnect, device number 7