VBT signature:	"$VBT VALLEYVIEW    "
VBT version:	1.0
BDB signature:	"BIOS_DATA_BLOCK "
BDB version:	178
BDB blocks present:
	  1   2   3   4   6   7   8   9  10  12  13  16  17  18  19  20
	 26  27  28  40  41  42  43  44  46  51  52 252 253 254

BDB block 1 - General features block:
	Panel fitting: text & graphics
	Flexaim: no
	Message: yes
	Clear screen: 0
	DVO color flip required: no
	External VBT: no
	Enable SSC: no
	LFP on override: no
	Disable SSC on clone: no
	Disable smooth vision: no
	Single DVI for CRT/DVI: no
	Legacy monitor detect: yes
	Integrated CRT: no
	Integrated TV: no

BDB block 2 - General definitions block:
	CRT DDC GMBUS addr: 0x02
	Use ACPI DPMS CRT power states: no
	Skip CRT detect at boot: no
	Use DPMS on AIM devices: yes
	Boot display type: 0x0000
	Child device size: 33
	EFP device info:
		Device handle: 0x0008 (LFP 1 (eDP))
		Device type: 0x1400 (unknown)
			Internal connector
			HDMI output
			MIPI output
		Port: 0x15 (unknown)
		DDC pin: 0x04
		Dock port: 0x00 (N/A)
		HDMI compatible? No
		Info: HDMI certified
		Aux channel: 0x00
		Dongle detect: 0x00
	EFP device info:
		Device handle: 0x0004 (EFP 1 (HDMI/DVI/DP))
		Device type: 0x60d2 (DVI-D)
			Power management
			Hotplug signaling
			HDMI output
			Content protection
			High speel link
			TMDS/DVI signaling
			Digital output
		Port: 0x01 (HDMI-B)
		DDC pin: 0x05
		Dock port: 0x00 (N/A)
		HDMI compatible? Yes
		Info: DVI
		Aux channel: 0x10
		Dongle detect: 0x00

BDB block 3:

BDB block 4:

BDB block 6:

BDB block 7:

BDB block 8:

BDB block 9:

BDB block 10:

BDB block 12 - Driver feature data block:
	Boot Device Algorithm: os default
	Block display switching when DVD active: yes
	Allow display switching when in Full Screen DOS: no
	Hot Plug DVO: yes
	Dual View Zoom: no
	Driver INT 15h hook: no
	Enable Sprite in Clone Mode: yes
	Use 00000110h ID for Primary LFP: no
	Boot Mode X: 1024
	Boot Mode Y: 768
	Boot Mode Bpp: 8
	Boot Mode Refresh: 60
	Enable LFP as primary: no
	Selective Mode Pruning: no
	Dual-Frequency Graphics Technology: no
	Default Render Clock Frequency: high
	NT 4.0 Dual Display Clone Support: no
	Default Power Scheme user interface: CUI
	Sprite Display Assignment when Overlay is Active in Clone Mode: secondary
	Display Maintain Aspect Scaling via CUI: yes
	Preserve Aspect Ratio: no
	Enable SDVO device power down: no
	CRT hotplug: no
	LVDS config: Embedded DisplayPort
	Define Display statically: no
	Legacy CRT max X: 0
	Legacy CRT max Y: 0
	Legacy CRT max refresh: 85

BDB block 13:

BDB block 16:

BDB block 17:

BDB block 18:

BDB block 19:

BDB block 20:

BDB block 26:

BDB block 27 - eDP block:
	Panel 5 *
		Power Sequence: T3 1000 T7 10 T9 2000 T10 500 T12 5000
		Panel color depth: 18 bpp
		eDP sDRRS MSA Delay: Lane 1
		Link params:
			rate: 1.62G
			lanes: x1 mode
			pre-emphasis: none
			vswing: 0.4V

BDB block 28:

BDB block 40 - LVDS options block:
	Panel type: 5
	LVDS EDID available: no
	Pixel dither: yes
	PFIT auto ratio: yes
	PFIT enhanced graphics mode: no
	PFIT enhanced text mode: no
	PFIT mode: 3

BDB block 41 - LVDS timing pointer data:
	Number of entries: 3

BDB block 42 - LVDS panel data block:
  Number of entries: 19 (preferred block marked with '*')
*	panel type 05: 800x1280 clock 76750000
		info:
		  LVDS: 0x00000000
		  PP_ON_DELAYS: 0x00000000
		  PP_OFF_DELAYS: 0x00000000
		  PP_DIVISOR: 0x00000000
		  PFIT: 0x0030b820
		timings: 800 824 828 984 1280 1288 1292 1300 76750.00 (good)

BDB block 43 - Backlight info block:
	Inverter type: 2
	     polarity: 0
	    GPIO pins: 1
	  GMBUS speed: 1
	     PWM freq: 200
	Minimum brightness: 15
	I2C slave addr: 0x58
	I2C command: 0xaa

BDB block 44:

BDB block 46:

BDB block 51:

BDB block 52 - MIPI configuration block:
	General Param
		 BTA disable: Enabled
		 Video Mode Color Format: RGB888
		 PPS GPIO Pins: Using PMIC 
		 CABC Support: not supported
		 Mode: VIDEO
		 Dithering: done in Panel Controller
	Port Desc
		 Lane Count: 4
		 Dual Link Support: not supported
	Dphy Flags
		 Clock Stop: DISABLED
		 EOT disabled: EOT to be sent

	HSTxTimeOut: 0x3fffff
	LPRXTimeOut: 0xffff
	TurnAroundTimeOut: 0x14
	DeviceResetTimer: 0xff
	MasterinitTimer: 0x7d0
	DBIBandwidthTimer: 0x0
	LpByteClkValue: 0x4

	Dphy Params
		Exit to zero Count: 0x3f
		Trail Count: 0x1F
		Clk zero count: 0x7f
		Prepare count:0xf

	ClockLaneSwitchingCount: 0xa0014
	HighToLowSwitchingCount: 0x46

	Timings based on Dphy spec
		TClkMiss: 0x3c
		TClkPost: 0x3c
		TClkPre: 0x8
		TClkPrepare: 0x32
		TClkSettle: 0x69
		TClkTermEnable: 0x26

	TClkTrail: 0x46
	TClkPrepareTClkZero: 0x136
	THSExit: 0x6e
	THsPrepare: 0x46
	THsPrepareTHsZero: 0x12c
	THSSettle: 0x5f
	THSSkip: 0x28
	THsTrail: 0x3c
	TInit: 0x0
	TLPX: 0x32
	MIPI PPS
		Panel power ON delay: 500
		Panel power on to Backlight enable delay: 500
		Backlight disable to Panel power OFF delay: 500
		Panel power OFF delay: 500
		Panel power cycle delay: 5000

BDB block 252:

BDB block 253:

BDB block 254: