[ 0.000000] microcode: microcode updated early to revision 0xba, date = 2017-04-09 [ 0.000000] Linux version 4.11.6-201.fc25.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Tue Jun 20 20:21:11 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.6-201.fc25.x86_64 root=UUID=58eb1598-a931-4744-9af0-b76979d03426 ro rootflags=subvol=root rhgb quiet LANG=fr_FR.UTF-8 crashkernel=128M [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c70fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c70fb000-0x00000000c7c7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c7eff000-0x00000000c7efffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004317fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xa84f3018-0xa8503057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a84f3017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a84f3018-0x00000000a8503057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a8503058-0x00000000c70fafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c70fb000-0x00000000c7c7efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c7c7f000-0x00000000c7e7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000c7e7f000-0x00000000c7efefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000c7eff000-0x00000000c7efffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c7f00000-0x00000000cc7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004317fffff] usable [ 0.000000] efi: EFI v2.40 by HP [ 0.000000] efi: ACPI=0xc7efe000 ACPI 2.0=0xc7efe014 SMBIOS=0xc78db000 MPS=0xc793b000 ESRT=0xc7073660 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP HP EliteBook 840 G3/8079, BIOS N75 Ver. 01.10 07/31/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x431800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 1 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 2 base 00CC000000 mask 7FFC000000 uncachable [ 0.000000] 3 base 00CA000000 mask 7FFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xc7f00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: ESRT header is not in the memory map. [ 0.000000] Base memory trampoline at [ffff9e98c0097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x25a381000, 0x25a381fff] PGTABLE [ 0.000000] BRK [0x25a382000, 0x25a382fff] PGTABLE [ 0.000000] BRK [0x25a383000, 0x25a383fff] PGTABLE [ 0.000000] BRK [0x25a384000, 0x25a384fff] PGTABLE [ 0.000000] BRK [0x25a385000, 0x25a385fff] PGTABLE [ 0.000000] BRK [0x25a386000, 0x25a386fff] PGTABLE [ 0.000000] BRK [0x25a387000, 0x25a387fff] PGTABLE [ 0.000000] BRK [0x25a388000, 0x25a388fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x3ed5f000-0x3fffafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000C7EFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000C7EBC188 0000DC (v01 HPQOEM SLIC-BPC 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000C7EEF000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000C7EC6000 025F16 (v02 HPQOEM 8079 00000000 INTL 20121018) [ 0.000000] ACPI: FACS 0x00000000C7E6B000 000040 [ 0.000000] ACPI: SSDT 0x00000000C7EFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018) [ 0.000000] ACPI: TCPA 0x00000000C7EFA000 000032 (v02 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C7EF9000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018) [ 0.000000] ACPI: UEFI 0x00000000C7E7A000 000042 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C7EF3000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EF2000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018) [ 0.000000] ACPI: MSDM 0x00000000C7EF1000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001) [ 0.000000] ACPI: SLIC 0x00000000C7EF0000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001) [ 0.000000] ACPI: HPET 0x00000000C7EEE000 000038 (v01 HPQOEM 8079 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000C7EED000 0000BC (v01 HPQOEM 8079 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000C7EEC000 00003C (v01 HPQOEM 8079 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000C7EC5000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EC4000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EC3000 0003DC (v02 HPQOEM SDS_RTD3 00001000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EC2000 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20121018) [ 0.000000] ACPI: SSDT 0x00000000C7EC0000 001B5C (v01 HP LAPTOPPC 00001000 INTL 20121018) [ 0.000000] ACPI: DMAR 0x00000000C7EBF000 0000CC (v01 INTEL SKL 00000001 INTL 00000001) [ 0.000000] ACPI: NHLT 0x00000000C7EBE000 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: ASF! 0x00000000C7EBD000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240) [ 0.000000] ACPI: FPDT 0x00000000C7EFD000 000044 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: BGRT 0x00000000C7EBB000 000038 (v01 HPQOEM EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x00000000C7EFB000 000260 (v02 HP PwrCtlEv 00000001 INTL 20121018) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004317fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x4317d5000-0x4317fffff] [ 0.000000] Reserving 128MB of memory at 768MB for crashkernel (System RAM: 16264MB) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000004317fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c70fafff] [ 0.000000] node 0: [mem 0x00000000c7eff000-0x00000000c7efffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000004317fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004317fffff] [ 0.000000] On node 0 totalpages: 4163737 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 88 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12676 pages used for memmap [ 0.000000] DMA32 zone: 811260 pages, LIFO batch:31 [ 0.000000] Normal zone: 52320 pages used for memmap [ 0.000000] Normal zone: 3348480 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics memory at 0x00000000ca800000-0x00000000cc7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa84f3000-0xa84f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8503000-0xa8503fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc70fb000-0xc7c7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7c7f000-0xc7e7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7e7f000-0xc7efefff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7f00000-0xcc7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc800000-0xf80f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.000000] e820: [mem 0xcc800000-0xf80f9fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff9e9cf1400000 s108888 r8192 d30376 u524288 [ 0.000000] pcpu-alloc: s108888 r8192 d30376 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4098589 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.6-201.fc25.x86_64 root=UUID=58eb1598-a931-4744-9af0-b76979d03426 ro rootflags=subvol=root rhgb quiet LANG=fr_FR.UTF-8 crashkernel=128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 15922692K/16654948K available (8690K kernel code, 1650K rwdata, 3600K rodata, 2124K init, 1816K bss, 732256K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:1024 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.001000] tsc: Detected 2500.000 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.00 BogoMIPS (lpj=2496000) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170119 [ 0.029879] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.030239] Security Framework initialized [ 0.030241] Yama: becoming mindful. [ 0.030244] SELinux: Initializing. [ 0.030257] SELinux: Starting in permissive mode [ 0.031006] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.034474] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.036072] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036085] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.036354] CPU: Physical Processor ID: 0 [ 0.036355] CPU: Processor Core ID: 0 [ 0.036359] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.036359] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.036364] mce: CPU supports 8 MCE banks [ 0.036372] CPU0: Thermal monitoring enabled (TM1) [ 0.036384] process: using mwait in idle threads [ 0.036386] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.036387] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.036809] Freeing SMP alternatives memory: 32K [ 0.044638] ftrace: allocating 31898 entries in 125 pages [ 0.051042] smpboot: Max logical packages: 2 [ 0.051051] DMAR: Host address width 39 [ 0.051052] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.051060] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.051061] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.051064] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.051065] DMAR: RMRR base: 0x000000c7c37000 end: 0x000000c7c56fff [ 0.051066] DMAR: RMRR base: 0x000000ca000000 end: 0x000000cc7fffff [ 0.051067] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.051069] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.051069] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.051070] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.051070] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.052635] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.052636] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.056756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066791] TSC deadline timer enabled [ 0.066796] smpboot: CPU0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.066855] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.066880] ... version: 4 [ 0.066880] ... bit width: 48 [ 0.066881] ... generic registers: 4 [ 0.066881] ... value mask: 0000ffffffffffff [ 0.066881] ... max period: 00007fffffffffff [ 0.066882] ... fixed-purpose events: 3 [ 0.066882] ... event mask: 000000070000000f [ 0.067000] smp: Bringing up secondary CPUs ... [ 0.067000] x86: Booting SMP configuration: [ 0.067000] .... node #0, CPUs: #1 [ 0.128056] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.128135] #2 #3 [ 0.250039] smp: Brought up 1 node, 4 CPUs [ 0.250039] smpboot: Total of 4 processors activated (19979.54 BogoMIPS) [ 0.251090] sched_clock: Marking stable (251000000, 0)->(259617681, -8617681) [ 0.251536] devtmpfs: initialized [ 0.251573] x86/mm: Memory block size: 128MB [ 0.254069] PM: Registering ACPI NVS region [mem 0xc7c7f000-0xc7e7efff] (2097152 bytes) [ 0.254126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.254131] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.254184] pinctrl core: initialized pinctrl subsystem [ 0.254292] RTC time: 9:52:12, date: 07/13/17 [ 0.254368] NET: Registered protocol family 16 [ 0.254510] cpuidle: using governor menu [ 0.254512] PCCT header not found. [ 0.254572] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.254573] ACPI: bus type PCI registered [ 0.254573] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.254645] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.254664] PCI: not using MMCONFIG [ 0.254665] PCI: Using configuration type 1 for base access [ 0.255759] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.255760] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.255968] ACPI: Added _OSI(Module Device) [ 0.255968] ACPI: Added _OSI(Processor Device) [ 0.255969] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.255969] ACPI: Added _OSI(Processor Aggregator Device) [ 0.256998] ACPI: Executed 17 blocks of module-level executable AML code [ 0.265098] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.269158] ACPI: Dynamic OEM Table Load: [ 0.269192] ACPI: SSDT 0xFFFF9E9CDE4F2800 00063F (v02 PmRef Cpu0Ist 00003000 INTL 20121018) [ 0.269376] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.270311] ACPI: Dynamic OEM Table Load: [ 0.270317] ACPI: SSDT 0xFFFF9E9CDE5FB800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018) [ 0.270538] ACPI: Dynamic OEM Table Load: [ 0.270542] ACPI: SSDT 0xFFFF9E9CDE5233C0 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121018) [ 0.270686] ACPI: Dynamic OEM Table Load: [ 0.270690] ACPI: SSDT 0xFFFF9E9CDE5C0A00 000130 (v02 PmRef HwpLvt 00003000 INTL 20121018) [ 0.271237] ACPI: Dynamic OEM Table Load: [ 0.271244] ACPI: SSDT 0xFFFF9E9CDE4F1800 0005AA (v02 PmRef ApIst 00003000 INTL 20121018) [ 0.271619] ACPI: Dynamic OEM Table Load: [ 0.271623] ACPI: SSDT 0xFFFF9E9CDE5C0200 000119 (v02 PmRef ApHwp 00003000 INTL 20121018) [ 0.271843] ACPI: Dynamic OEM Table Load: [ 0.271847] ACPI: SSDT 0xFFFF9E9CDE639000 000119 (v02 PmRef ApCst 00003000 INTL 20121018) [ 0.273318] ACPI : EC: EC started [ 0.273319] ACPI : EC: interrupt blocked [ 3.331413] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 3.331414] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.331415] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 3.331416] ACPI: Interpreter enabled [ 3.331466] ACPI: (supports S0 S3 S4 S5) [ 3.331467] ACPI: Using IOAPIC for interrupt routing [ 3.331504] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 3.334003] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 3.334010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.335663] ACPI: Power Resource [PG01] (on) [ 3.336003] ACPI: Power Resource [PG02] (on) [ 3.336363] ACPI: Power Resource [PG00] (on) [ 3.340692] ACPI: Power Resource [WRST] (on) [ 3.340871] ACPI: Power Resource [PXP] (on) [ 3.466325] ACPI: Power Resource [WRST] (on) [ 3.466715] ACPI: Power Resource [WRST] (on) [ 3.467211] ACPI: Power Resource [WRST] (on) [ 3.467615] ACPI: Power Resource [WRST] (on) [ 3.468040] ACPI: Power Resource [WRST] (on) [ 3.468430] ACPI: Power Resource [WRST] (on) [ 3.468826] ACPI: Power Resource [WRST] (on) [ 3.469220] ACPI: Power Resource [WRST] (on) [ 3.469610] ACPI: Power Resource [WRST] (on) [ 3.470005] ACPI: Power Resource [WRST] (on) [ 3.470394] ACPI: Power Resource [WRST] (on) [ 3.470751] ACPI: Power Resource [WRST] (on) [ 3.471111] ACPI: Power Resource [WRST] (on) [ 3.471478] ACPI: Power Resource [WRST] (on) [ 3.471856] ACPI: Power Resource [WRST] (on) [ 3.472216] ACPI: Power Resource [WRST] (on) [ 3.472571] ACPI: Power Resource [WRST] (on) [ 3.472932] ACPI: Power Resource [WRST] (on) [ 3.473287] ACPI: Power Resource [WRST] (on) [ 3.478529] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 3.478534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.481277] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.481278] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.483253] PCI host bridge to bus 0000:00 [ 3.483255] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.483256] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 3.483257] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.483258] pci_bus 0000:00: root bus resource [mem 0xcc800000-0xf7ffffff window] [ 3.483259] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 3.483260] pci_bus 0000:00: root bus resource [bus 00-3e] [ 3.483270] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 3.484014] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 3.484028] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 3.484034] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 3.484039] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 3.484847] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 3.484865] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit] [ 3.484936] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.485707] pci 0000:00:14.0: System wakeup disabled by ACPI [ 3.485740] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 3.485758] pci 0000:00:14.2: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit] [ 3.486631] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 3.486854] pci 0000:00:15.0: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit] [ 3.488275] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 3.488295] pci 0000:00:16.0: reg 0x10: [mem 0xe124d000-0xe124dfff 64bit] [ 3.488370] pci 0000:00:16.0: PME# supported from D3hot [ 3.489015] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002 [ 3.489026] pci 0000:00:16.3: reg 0x10: [io 0x3080-0x3087] [ 3.489032] pci 0000:00:16.3: reg 0x14: [mem 0xe124a000-0xe124afff] [ 3.489698] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 3.489712] pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff] [ 3.489719] pci 0000:00:17.0: reg 0x14: [mem 0xe1250000-0xe12500ff] [ 3.489726] pci 0000:00:17.0: reg 0x18: [io 0x3088-0x308f] [ 3.489733] pci 0000:00:17.0: reg 0x1c: [io 0x3090-0x3093] [ 3.489740] pci 0000:00:17.0: reg 0x20: [io 0x3040-0x305f] [ 3.489747] pci 0000:00:17.0: reg 0x24: [mem 0xe124e000-0xe124e7ff] [ 3.489789] pci 0000:00:17.0: PME# supported from D3hot [ 3.490440] pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400 [ 3.490500] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.491155] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 3.491187] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400 [ 3.491249] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 3.491885] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 3.491945] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 3.492622] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 3.492631] pci 0000:00:1f.2: reg 0x10: [mem 0xe1240000-0xe1243fff] [ 3.493286] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380 [ 3.493306] pci 0000:00:1f.3: reg 0x10: [mem 0xe1244000-0xe1247fff 64bit] [ 3.493330] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit] [ 3.493379] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 3.494003] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 3.494037] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 3.494077] pci 0000:00:1f.4: reg 0x10: [mem 0xe124f000-0xe124f0ff 64bit] [ 3.494127] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 3.494804] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000 [ 3.494822] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff] [ 3.494921] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 3.495520] pci 0000:00:1f.6: System wakeup disabled by ACPI [ 3.495617] pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 [ 3.495636] pci 0000:01:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff] [ 3.495779] pci 0000:01:00.0: supports D1 D2 [ 3.495780] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.495870] pci 0000:01:00.0: System wakeup disabled by ACPI [ 3.498916] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.498920] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff] [ 3.499034] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000 [ 3.499067] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit] [ 3.499327] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 3.499529] pci 0000:02:00.0: System wakeup disabled by ACPI [ 3.501964] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 3.501968] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff] [ 3.503943] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.503998] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 3.504052] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.504104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.504157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.504210] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.504262] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.504315] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.504651] ACPI: Enabled 6 GPEs in block 00 to 7F [ 3.505027] ACPI : EC: interrupt unblocked [ 3.505037] ACPI : EC: event unblocked [ 3.505045] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.505047] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 3.505143] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 3.505144] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.505148] pci 0000:00:02.0: vgaarb: bridge control possible [ 3.505149] vgaarb: loaded [ 3.505229] SCSI subsystem initialized [ 3.505262] libata version 3.00 loaded. [ 3.505278] ACPI: bus type USB registered [ 3.505290] usbcore: registered new interface driver usbfs [ 3.505296] usbcore: registered new interface driver hub [ 3.505307] usbcore: registered new device driver usb [ 3.505355] Registered efivars operations [ 3.534173] PCI: Using ACPI for IRQ routing [ 3.541005] PCI: pci_cache_line_size set to 64 bytes [ 3.541191] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 3.541192] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 3.541192] e820: reserve RAM buffer [mem 0xa84f3018-0xabffffff] [ 3.541193] e820: reserve RAM buffer [mem 0xc70fb000-0xc7ffffff] [ 3.541194] e820: reserve RAM buffer [mem 0xc7f00000-0xc7ffffff] [ 3.541194] e820: reserve RAM buffer [mem 0x431800000-0x433ffffff] [ 3.541255] NetLabel: Initializing [ 3.541255] NetLabel: domain hash size = 128 [ 3.541255] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.541266] NetLabel: unlabeled traffic allowed by default [ 3.541392] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.541396] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 3.544452] clocksource: Switched to clocksource hpet [ 3.553025] VFS: Disk quotas dquot_6.6.0 [ 3.553041] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.553098] pnp: PnP ACPI init [ 3.553286] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 3.553288] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 3.553289] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 3.553290] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 3.553290] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 3.553293] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.553577] system 00:01: [io 0x2000-0x20fe] has been reserved [ 3.553579] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.553768] system 00:02: [io 0x0680-0x069f] has been reserved [ 3.553769] system 00:02: [io 0xffff] has been reserved [ 3.553769] system 00:02: [io 0xffff] has been reserved [ 3.553770] system 00:02: [io 0xffff] has been reserved [ 3.553771] system 00:02: [io 0x1800-0x18fe] has been reserved [ 3.553772] system 00:02: [io 0x164e-0x164f] has been reserved [ 3.553773] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.553852] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.553878] system 00:04: [io 0x1854-0x1857] has been reserved [ 3.553879] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 3.553891] pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active) [ 3.553904] pnp 00:06: Plug and Play ACPI device, IDs SYN3037 SYN0100 SYN0002 PNP0f13 (active) [ 3.553945] system 00:07: [io 0x0200-0x023f] has been reserved [ 3.553946] system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved [ 3.553947] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.554912] system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved [ 3.554913] system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved [ 3.554914] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.555267] system 00:09: [mem 0xfe030000-0xfe030007] has been reserved [ 3.555269] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.555496] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 3.555497] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 3.555498] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 3.555499] system 00:0a: [mem 0xf8000000-0xfbffffff] could not be reserved [ 3.555500] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 3.555501] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved [ 3.555501] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 3.555502] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved [ 3.555503] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 3.555504] system 00:0a: [mem 0xcc800000-0xcc81ffff] has been reserved [ 3.555505] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.555725] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 3.555839] pnp: PnP ACPI: found 12 devices [ 3.564031] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.564046] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 3.564047] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 3.564060] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcc900000-0xccafffff 64bit pref] [ 3.564062] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 3.564063] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.564069] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 3.564072] pci 0000:00:1c.0: bridge window [mem 0xe1000000-0xe10fffff] [ 3.564074] pci 0000:00:1c.0: bridge window [mem 0xcc900000-0xccafffff 64bit pref] [ 3.564078] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 3.564081] pci 0000:00:1c.3: bridge window [mem 0xe1100000-0xe11fffff] [ 3.564086] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.564087] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.564088] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.564088] pci_bus 0000:00: resource 7 [mem 0xcc800000-0xf7ffffff window] [ 3.564089] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 3.564090] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 3.564091] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe10fffff] [ 3.564091] pci_bus 0000:01: resource 2 [mem 0xcc900000-0xccafffff 64bit pref] [ 3.564092] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff] [ 3.564211] NET: Registered protocol family 2 [ 3.564369] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 3.564608] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.564799] TCP: Hash tables configured (established 131072 bind 65536) [ 3.564829] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 3.564913] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 3.565004] NET: Registered protocol family 1 [ 3.565016] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.565381] PCI: CLS 0 bytes, default 64 [ 3.565415] Unpacking initramfs... [ 3.797844] Freeing initrd memory: 19056K [ 3.797920] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.0 [ 3.797934] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.797936] software IO TLB [mem 0xb407a000-0xb807a000] (64MB) mapped at [ffff9e997407a000-ffff9e9978079fff] [ 3.797975] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 3.799266] audit: initializing netlink subsys (disabled) [ 3.799339] audit: type=2000 audit(1499939534.780:1): state=initialized audit_enabled=0 res=1 [ 3.799599] Initialise system trusted keyrings [ 3.799684] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 3.800499] zbud: loaded [ 3.801017] SELinux: Registering netfilter hooks [ 3.839682] NET: Registered protocol family 38 [ 3.839684] Key type asymmetric registered [ 3.839685] Asymmetric key parser 'x509' registered [ 3.839711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.839761] io scheduler noop registered [ 3.839761] io scheduler deadline registered [ 3.839792] io scheduler cfq registered (default) [ 3.839793] io scheduler mq-deadline registered [ 3.839935] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 3.840514] pcieport 0000:00:1c.0: AER enabled with IRQ 122 [ 3.840541] pcieport 0000:00:1c.3: AER enabled with IRQ 123 [ 3.840549] pcieport 0000:00:1c.0: Signaling PME with IRQ 122 [ 3.840556] pcieport 0000:00:1c.3: Signaling PME with IRQ 123 [ 3.840569] pciehp 0000:00:1c.0:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 3.840628] efifb: probing for efifb [ 3.840637] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 3.840638] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 3.840638] efifb: scrolling: redraw [ 3.840639] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.840742] Console: switching to colour frame buffer device 128x48 [ 3.841963] fb0: EFI VGA frame buffer device [ 3.841967] intel_idle: MWAIT substates: 0x11142120 [ 3.841968] intel_idle: v0.4.1 model 0x4E [ 3.842182] intel_idle: lapic_timer_reliable_states 0xffffffff [ 3.842304] ACPI: AC Adapter [AC] (on-line) [ 3.842357] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 3.842359] ACPI: Sleep Button [SLPB] [ 3.842403] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 3.842435] ACPI: Lid Switch [LID] [ 3.842490] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.842491] ACPI: Power Button [PWRF] [ 3.849432] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.850599] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.850600] ACPI: Thermal Zone [CPUZ] (45 C) [ 3.854679] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.854679] ACPI: Thermal Zone [GFXZ] (0 C) [ 3.857825] thermal LNXTHERM:02: registered as thermal_zone2 [ 3.857825] ACPI: Thermal Zone [EXTZ] (40 C) [ 3.861688] thermal LNXTHERM:03: registered as thermal_zone3 [ 3.861689] ACPI: Thermal Zone [LOCZ] (35 C) [ 3.864794] thermal LNXTHERM:04: registered as thermal_zone4 [ 3.864795] ACPI: Thermal Zone [BATZ] (35 C) [ 3.865056] thermal LNXTHERM:05: registered as thermal_zone5 [ 3.865057] ACPI: Thermal Zone [PCHZ] (127 C) [ 3.865129] GHES: HEST is not enabled! [ 3.865272] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.868403] Non-volatile memory driver v1.3 [ 3.868465] Linux agpgart interface v0.103 [ 3.868831] ahci 0000:00:17.0: version 3.0 [ 3.869015] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 3.869051] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 3.869053] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 3.869438] scsi host0: ahci [ 3.870121] scsi host1: ahci [ 3.870355] scsi host2: ahci [ 3.870384] ata1: SATA max UDMA/133 abar m2048@0xe124e000 port 0xe124e100 irq 124 [ 3.870385] ata2: DUMMY [ 3.870386] ata3: SATA max UDMA/133 abar m2048@0xe124e000 port 0xe124e200 irq 124 [ 3.870442] libphy: Fixed MDIO Bus: probed [ 3.870573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.870576] ehci-pci: EHCI PCI platform driver [ 3.870585] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.870586] ohci-pci: OHCI PCI platform driver [ 3.870591] uhci_hcd: USB Universal Host Controller Interface driver [ 3.870782] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.870859] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.872056] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 3.872068] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.872190] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.872191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.872192] usb usb1: Product: xHCI Host Controller [ 3.872193] usb usb1: Manufacturer: Linux 4.11.6-201.fc25.x86_64 xhci-hcd [ 3.872193] usb usb1: SerialNumber: 0000:00:14.0 [ 3.872325] hub 1-0:1.0: USB hub found [ 3.872367] hub 1-0:1.0: 12 ports detected [ 3.872932] ACPI: Battery Slot [BAT0] (battery present) [ 3.879560] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.879618] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.879645] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.879645] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.879646] usb usb2: Product: xHCI Host Controller [ 3.879647] usb usb2: Manufacturer: Linux 4.11.6-201.fc25.x86_64 xhci-hcd [ 3.879648] usb usb2: SerialNumber: 0000:00:14.0 [ 3.879738] hub 2-0:1.0: USB hub found [ 3.879749] hub 2-0:1.0: 6 ports detected [ 3.882525] usb: port power management may be unreliable [ 3.883267] usbcore: registered new interface driver usbserial [ 3.883270] usbcore: registered new interface driver usbserial_generic [ 3.883274] usbserial: USB Serial support registered for generic [ 3.883300] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.884712] i8042: Detected active multiplexing controller, rev 1.1 [ 3.884949] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.884951] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.884966] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.884978] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.884989] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.885116] mousedev: PS/2 mouse device common for all mice [ 3.885497] rtc_cmos 00:03: RTC can wake from S4 [ 3.886027] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.886128] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.886174] device-mapper: uevent: version 1.0.3 [ 3.886280] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.886447] intel_pstate: Intel P-state driver initializing [ 3.886966] intel_pstate: HWP enabled [ 3.887066] hidraw: raw HID events driver (C) Jiri Kosina [ 3.887085] usbcore: registered new interface driver usbhid [ 3.887086] usbhid: USB HID core driver [ 3.887134] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002) [ 3.887193] drop_monitor: Initializing network drop monitor service [ 3.887260] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.887348] Initializing XFRM netlink socket [ 3.887478] NET: Registered protocol family 10 [ 3.889918] Segment Routing with IPv6 [ 3.889931] mip6: Mobile IPv6 [ 3.889932] NET: Registered protocol family 17 [ 3.890593] microcode: sig=0x406e3, pf=0x80, revision=0xba [ 3.890729] microcode: Microcode Update Driver: v2.2. [ 3.890735] AVX2 version of gcm_enc/dec engaged. [ 3.890736] AES CTR mode by8 optimization enabled [ 3.902499] registered taskstats version 1 [ 3.902506] Loading compiled-in X.509 certificates [ 3.904329] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 3.904955] Loaded X.509 cert 'Fedora kernel signing key: 2ee9bd9e452481fd75fcb0af51c020701b6df716' [ 3.904987] zswap: loaded using pool lzo/zbud [ 3.910130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.915272] Key type big_key registered [ 3.917249] Key type encrypted registered [ 3.918195] Magic number: 9:275:879 [ 3.918516] rtc_cmos 00:03: setting system clock to 2017-07-13 09:52:15 UTC (1499939535) [ 3.918546] PM: Hibernation image not present or could not be loaded. [ 4.176081] ata1: SATA link down (SStatus 4 SControl 300) [ 4.194708] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd [ 4.207169] usb 2-4: New USB device found, idVendor=0424, idProduct=5534 [ 4.207174] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 4.207178] usb 2-4: Product: USB5534B [ 4.207182] usb 2-4: Manufacturer: SMSC [ 4.208193] hub 2-4:1.0: USB hub found [ 4.208418] hub 2-4:1.0: 4 ports detected [ 4.315619] random: fast init done [ 4.362755] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 4.487798] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.491138] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 4.491146] ata3.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 4.491260] ata3.00: ATA-10: LITEON CV1-8B512-HP, V182, max UDMA/100 [ 4.491265] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 4.492458] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 4.492516] ata3.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 4.493008] ata3.00: configured for UDMA/100 [ 4.493898] scsi 2:0:0:0: Direct-Access ATA LITEON CV1-8B512 V182 PQ: 0 ANSI: 5 [ 4.495221] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.496096] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 4.496101] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 4.496250] sd 2:0:0:0: [sda] Write Protect is off [ 4.496255] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.496536] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.501418] sda: sda1 sda2 sda3 sda4 [ 4.502824] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.507945] Freeing unused kernel memory: 2124K [ 4.507946] Write protecting the kernel read-only data: 14336k [ 4.508381] Freeing unused kernel memory: 1536K [ 4.509194] Freeing unused kernel memory: 496K [ 4.510719] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.510725] rodata_test: all tests were successful [ 4.532336] usb 1-4: New USB device found, idVendor=0424, idProduct=2134 [ 4.532528] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.532529] usb 1-4: Product: USB2134B [ 4.532530] usb 1-4: Manufacturer: SMSC [ 4.534105] hub 1-4:1.0: USB hub found [ 4.534135] hub 1-4:1.0: 4 ports detected [ 4.583394] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.583554] systemd[1]: Detected architecture x86-64. [ 4.583555] systemd[1]: Running in initial RAM disk. [ 4.583568] systemd[1]: Set hostname to . [ 4.614225] systemd[1]: Listening on udev Kernel Socket. [ 4.614558] systemd[1]: Created slice System Slice. [ 4.614620] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.614653] systemd[1]: Reached target Timers. [ 4.614705] systemd[1]: Listening on Journal Socket. [ 4.615157] systemd[1]: Starting Load Kernel Modules... [ 4.623975] audit: type=1130 audit(1499939536.204:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.628420] audit: type=1130 audit(1499939536.209:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.630247] audit: type=1130 audit(1499939536.210:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.634440] audit: type=1130 audit(1499939536.215:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.666283] audit: type=1130 audit(1499939536.247:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.674263] audit: type=1130 audit(1499939536.255:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.690377] audit: type=1130 audit(1499939536.271:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.692513] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 4.710868] audit: type=1130 audit(1499939536.292:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.714383] audit: type=1130 audit(1499939536.295:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 4.803174] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 4.803365] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 126 [ 4.805618] pps_core: LinuxPPS API ver. 1 registered [ 4.805619] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 4.808218] PTP clock support registered [ 4.825478] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.825479] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.825793] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.852312] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9 [ 4.866477] raid6: sse2x1 gen() 7375 MB/s [ 4.883474] raid6: sse2x1 xor() 5865 MB/s [ 4.900475] raid6: sse2x2 gen() 9644 MB/s [ 4.917472] raid6: sse2x2 xor() 7005 MB/s [ 4.934475] raid6: sse2x4 gen() 11367 MB/s [ 4.951474] raid6: sse2x4 xor() 8076 MB/s [ 4.968472] raid6: avx2x1 gen() 15511 MB/s [ 4.985474] raid6: avx2x1 xor() 11068 MB/s [ 5.002472] raid6: avx2x2 gen() 18117 MB/s [ 5.019474] raid6: avx2x2 xor() 12730 MB/s [ 5.036473] raid6: avx2x4 gen() 21507 MB/s [ 5.053474] raid6: avx2x4 xor() 14994 MB/s [ 5.053474] raid6: using algorithm avx2x4 gen() 21507 MB/s [ 5.053475] raid6: .... xor() 14994 MB/s, rmw enabled [ 5.053475] raid6: using avx2x2 recovery algorithm [ 5.053486] clocksource: Switched to clocksource tsc [ 5.054495] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b [ 5.054496] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.055430] xor: automatically using best checksumming function avx [ 5.119773] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 5.130490] Btrfs loaded, crc32c=crc32c-intel [ 5.133755] BTRFS: device label fedora_milan-elitebook devid 1 transid 297394 /dev/sda4 [ 5.138588] usb 1-4.2: new high-speed USB device number 4 using xhci_hcd [ 5.195806] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 98:e7:f4:2e:34:49 [ 5.195808] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 5.195884] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 5.196519] [drm] Memory usable by graphics device = 4096M [ 5.196521] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 5.196521] fb: switching to inteldrmfb from EFI VGA [ 5.196544] Console: switching to colour dummy device 80x25 [ 5.196607] [drm] Replacing VGA console driver [ 5.196716] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 5.202696] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.202696] [drm] Driver supports precise vblank timestamp query. [ 5.203741] 8021q: 802.1Q VLAN Support v1.8 [ 5.205247] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) [ 5.205831] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.211826] [drm] GuC firmware load skipped [ 5.212196] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 [ 5.213927] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.214330] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 5.228091] usb 1-4.2: New USB device found, idVendor=05e3, idProduct=0610 [ 5.228093] usb 1-4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.228094] usb 1-4.2: Product: USB2.0 Hub [ 5.228790] hub 1-4.2:1.0: USB hub found [ 5.229095] hub 1-4.2:1.0: 4 ports detected [ 5.261656] fbcon: inteldrmfb (fb0) is primary device [ 5.382587] usb 1-9: new high-speed USB device number 5 using xhci_hcd [ 5.581535] usb 1-9: New USB device found, idVendor=04ca, idProduct=7053 [ 5.581540] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 5.581544] usb 1-9: Product: HP HD Camera [ 5.581548] usb 1-9: Manufacturer: DETNQ019I38LU4 [ 5.581551] usb 1-9: SerialNumber: 200901010001 [ 5.626684] usb 1-4.3: new low-speed USB device number 6 using xhci_hcd [ 5.720509] usb 1-4.3: New USB device found, idVendor=0461, idProduct=4e22 [ 5.720515] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.720520] usb 1-4.3: Product: USB Optical Mouse [ 5.720523] usb 1-4.3: Manufacturer: PixArt [ 5.723705] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:0461:4E22.0001/input/input12 [ 5.724231] hid-generic 0003:0461:4E22.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-4.3/input0 [ 5.800594] usb 1-4.4: new low-speed USB device number 7 using xhci_hcd [ 5.815511] psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758] [ 5.848846] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..] [ 5.908419] usb 1-4.4: New USB device found, idVendor=03f0, idProduct=0024 [ 5.908426] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.908430] usb 1-4.4: Product: HP Basic USB Keyboard [ 5.908434] usb 1-4.4: Manufacturer: CHICONY [ 5.908612] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742 [ 5.918628] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:03F0:0024.0002/input/input13 [ 5.946165] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10 [ 5.971387] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-4.4/input0 [ 6.579397] Console: switching to colour frame buffer device 240x67 [ 6.770848] [drm] RC6 on [ 6.811652] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.984185] BTRFS info (device sda4): disk space caching is enabled [ 6.984187] BTRFS info (device sda4): has skinny extents [ 7.102660] BTRFS info (device sda4): detected SSD devices, enabling SSD mode [ 7.380353] systemd-journald[206]: Received SIGTERM from PID 1 (systemd). [ 7.396949] systemd: 17 output lines suppressed due to ratelimiting [ 7.503905] SELinux: 32768 avtab hash slots, 107090 rules. [ 7.535157] SELinux: 32768 avtab hash slots, 107090 rules. [ 7.557935] SELinux: 8 users, 14 roles, 5072 types, 310 bools, 1 sens, 1024 cats [ 7.557937] SELinux: 94 classes, 107090 rules [ 7.560691] SELinux: Class sctp_socket not defined in policy. [ 7.560692] SELinux: Class icmp_socket not defined in policy. [ 7.560692] SELinux: Class ax25_socket not defined in policy. [ 7.560693] SELinux: Class ipx_socket not defined in policy. [ 7.560693] SELinux: Class netrom_socket not defined in policy. [ 7.560694] SELinux: Class atmpvc_socket not defined in policy. [ 7.560694] SELinux: Class x25_socket not defined in policy. [ 7.560695] SELinux: Class rose_socket not defined in policy. [ 7.560695] SELinux: Class decnet_socket not defined in policy. [ 7.560695] SELinux: Class atmsvc_socket not defined in policy. [ 7.560696] SELinux: Class rds_socket not defined in policy. [ 7.560696] SELinux: Class irda_socket not defined in policy. [ 7.560696] SELinux: Class pppox_socket not defined in policy. [ 7.560697] SELinux: Class llc_socket not defined in policy. [ 7.560697] SELinux: Class can_socket not defined in policy. [ 7.560698] SELinux: Class tipc_socket not defined in policy. [ 7.560698] SELinux: Class bluetooth_socket not defined in policy. [ 7.560698] SELinux: Class iucv_socket not defined in policy. [ 7.560699] SELinux: Class rxrpc_socket not defined in policy. [ 7.560699] SELinux: Class isdn_socket not defined in policy. [ 7.560700] SELinux: Class phonet_socket not defined in policy. [ 7.560700] SELinux: Class ieee802154_socket not defined in policy. [ 7.560700] SELinux: Class caif_socket not defined in policy. [ 7.560701] SELinux: Class alg_socket not defined in policy. [ 7.560701] SELinux: Class nfc_socket not defined in policy. [ 7.560702] SELinux: Class vsock_socket not defined in policy. [ 7.560702] SELinux: Class kcm_socket not defined in policy. [ 7.560702] SELinux: Class qipcrtr_socket not defined in policy. [ 7.560703] SELinux: Class smc_socket not defined in policy. [ 7.560703] SELinux: the above unknown classes and permissions will be allowed [ 7.560707] SELinux: Completing initialization. [ 7.560707] SELinux: Setting up existing superblocks. [ 7.570584] systemd[1]: Successfully loaded SELinux policy in 110.453ms. [ 7.604071] systemd[1]: Relabelled /dev and /run in 18.726ms. [ 7.828713] BTRFS info (device sda4): disk space caching is enabled [ 7.859539] systemd-journald[519]: Received request to flush runtime journal from PID 1 [ 8.019299] Initializing HPQ6001 module [ 8.019397] input: HP Wireless hotkeys as /devices/virtual/input/input15 [ 8.048511] tpm_tis 00:0b: 1.2 TPM (device-id 0x1B, rev-id 16) [ 8.049520] hp_accel: hardware type HPB64xx found [ 8.153173] wmi: Mapper loaded [ 8.161516] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value [ 8.161558] tpm tpm0: TPM is disabled/deactivated (0x7) [ 8.161561] tpm tpm0: tpm_read_log_acpi: TCPA log area empty [ 8.161579] tpm_tis: probe of 00:0b failed with error -5 [ 8.162162] lis3lv02d: 8 bits 3DC sensor found [ 8.173262] Bluetooth: Core ver 2.22 [ 8.173277] NET: Registered protocol family 31 [ 8.173278] Bluetooth: HCI device and connection manager initialized [ 8.173280] Bluetooth: HCI socket layer initialized [ 8.173282] Bluetooth: L2CAP socket layer initialized [ 8.173301] Bluetooth: SCO socket layer initialized [ 8.175996] tpm_inf_pnp 00:0b: Found TPM with ID IFX0102 [ 8.202951] Bluetooth: HCI UART driver ver 2.3 [ 8.202953] Bluetooth: HCI UART protocol H4 registered [ 8.202954] Bluetooth: HCI UART protocol BCSP registered [ 8.202972] Bluetooth: HCI UART protocol LL registered [ 8.202972] Bluetooth: HCI UART protocol ATH3K registered [ 8.202973] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.202995] Bluetooth: HCI UART protocol Intel registered [ 8.203006] Bluetooth: HCI UART protocol Broadcom registered [ 8.203006] Bluetooth: HCI UART protocol QCA registered [ 8.203007] Bluetooth: HCI UART protocol AG6XX registered [ 8.203008] Bluetooth: HCI UART protocol Marvell registered [ 8.204926] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 8.212500] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 8.233061] 0000:00:16.3: ttyS4 at I/O 0x3080 (irq = 19, base_baud = 115200) is a 16550A [ 8.238868] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 8.271390] media: Linux media interface: v0.10 [ 8.272732] Adding 8193020k swap on /dev/sda3. Priority:-1 extents:1 across:8193020k SSFS [ 8.280607] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 8.281099] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 8.281484] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 8.285830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.285846] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 8.307604] usbcore: registered new interface driver btusb [ 8.316251] Bluetooth: hci0: Firmware revision 0.0 build 118 week 50 2016 [ 8.325363] Linux video capture interface: v2.00 [ 8.352775] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 8.352777] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 8.352777] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.352778] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 8.352779] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 8.352779] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 8.360435] uvcvideo: Found UVC 1.00 device HP HD Camera (04ca:7053) [ 8.373404] uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized! [ 8.373407] uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized! [ 8.373408] uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized! [ 8.374777] input: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input16 [ 8.374910] usbcore: registered new interface driver uvcvideo [ 8.374911] USB Video Class driver (1.1.1) [ 8.423715] Intel(R) Wireless WiFi driver for Linux [ 8.423716] Copyright(c) 2003- 2015 Intel Corporation [ 8.423815] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 8.434077] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2 [ 8.441125] iwlwifi 0000:02:00.0: capa flags index 3 larger than supported by driver [ 8.441865] iwlwifi 0000:02:00.0: loaded firmware version 27.455470.0 op_mode iwlmvm [ 8.448797] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9cd26cedc8 (20170119/exresop-593) [ 8.448858] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 8.448981] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 8.449062] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 8.453713] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9cd26ce708 (20170119/exresop-593) [ 8.453767] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 8.454096] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 8.454671] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 8.462092] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9cd26ce480 (20170119/exresop-593) [ 8.462149] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 8.462334] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 8.476450] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 8.476746] input: HP WMI hotkeys as /devices/virtual/input/input17 [ 8.479362] iTCO_vendor_support: vendor-support=0 [ 8.491609] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 8.491743] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 8.492964] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.502561] ACPI Error: Attempt to CreateField of length zero (20170119/dsopcode-168) [ 8.502566] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff9e9ce08a3140), AE_AML_OPERAND_VALUE (20170119/psparse-543) [ 8.502577] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_VALUE (20170119/psparse-543) [ 8.505302] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 8.518715] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 8.530997] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 8.533566] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8.534321] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 8.562307] snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing. [ 8.562857] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 8.562859] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 8.562861] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 8.562862] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 8.562863] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 8.562864] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 8.562865] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 8.562866] snd_hda_codec_conexant hdaudioC0D0: Line=0x18 [ 8.563961] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 8.580228] intel_rapl: Found RAPL domain package [ 8.580230] intel_rapl: Found RAPL domain core [ 8.580231] intel_rapl: Found RAPL domain uncore [ 8.583787] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 8.583845] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 8.583893] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 8.583941] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 8.583988] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 8.584036] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 8.584081] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 8.584127] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 8.584184] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 8.670065] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 8.670363] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 8.670382] thermal thermal_zone8: failed to read out thermal zone (-5) [ 8.673438] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 9.353943] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input27 [ 9.807069] random: crng init done [ 13.690495] kauditd_printk_skb: 61 callbacks suppressed [ 13.690501] audit: type=1131 audit(1499939545.270:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.538812] mei_wdt mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02: Could not reg notif event ret=-22 [ 23.539249] mei_wdt: probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02 failed with error -22 [ 23.548090] audit: type=1130 audit(1499939555.128:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.574260] audit: type=1130 audit(1499939555.154:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.574267] audit: type=1131 audit(1499939555.154:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.602171] audit: type=1130 audit(1499939555.182:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-52DB\x2d44C6 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.614003] audit: type=1130 audit(1499939555.192:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-45e7099f\x2dcb69\x2d4568\x2dad08\x2dbe5ab9fac32b comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.632876] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 23.656129] audit: type=1130 audit(1499939555.236:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.661808] audit: type=1130 audit(1499939555.242:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.661817] audit: type=1131 audit(1499939555.242:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.670686] audit: type=1130 audit(1499939555.251:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.670689] audit: type=1131 audit(1499939555.251:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 23.743047] RPC: Registered named UNIX socket transport module. [ 23.743048] RPC: Registered udp transport module. [ 23.743048] RPC: Registered tcp transport module. [ 23.743049] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 24.028995] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.028997] Bluetooth: BNEP filters: protocol multicast [ 24.028999] Bluetooth: BNEP socket layer initialized [ 26.818027] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 26.886197] Ebtables v2.0 registered [ 26.933381] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 26.952520] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 27.154836] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 27.179768] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 27.182157] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.182660] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.312448] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.312843] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.409494] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 27.421708] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.422706] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.551422] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.551881] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 27.651298] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 27.712970] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 27.733820] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 27.742207] Netfilter messages via NETLINK v0.30. [ 27.752289] ip_set: protocol 6 [ 28.230571] tun: Universal TUN/TAP device driver, 1.6 [ 28.276822] virbr0: port 1(virbr0-nic) entered blocking state [ 28.276824] virbr0: port 1(virbr0-nic) entered disabled state [ 28.276881] device virbr0-nic entered promiscuous mode [ 28.439122] virbr0: port 1(virbr0-nic) entered blocking state [ 28.439126] virbr0: port 1(virbr0-nic) entered listening state [ 28.477021] virbr0: port 1(virbr0-nic) entered disabled state [ 28.673931] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 28.673938] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 28.674006] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 31.175568] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 31.195591] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 31.206998] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 31.334414] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 31.343392] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 31.351215] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 106.747711] fuse init (API version 7.26) [ 112.639759] Bluetooth: RFCOMM TTY layer initialized [ 112.639776] Bluetooth: RFCOMM socket layer initialized [ 112.639824] Bluetooth: RFCOMM ver 1.11 [ 114.503063] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 116.313321] wlp2s0: authenticate with f0:5c:19:66:dc:52 [ 116.322687] wlp2s0: send auth to f0:5c:19:66:dc:52 (try 1/3) [ 116.327999] wlp2s0: authenticated [ 116.328573] wlp2s0: associate with f0:5c:19:66:dc:52 (try 1/3) [ 116.329610] wlp2s0: RX AssocResp from f0:5c:19:66:dc:52 (capab=0x11 status=0 aid=1) [ 116.331814] wlp2s0: associated [ 116.331845] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 116.390770] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by f0:5c:19:66:dc:52 [ 1819.954052] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 2089.680254] wlp2s0: deauthenticating from f0:5c:19:66:dc:52 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2089.690896] iwlwifi 0000:02:00.0: Failed to find station [ 2089.690901] wlp2s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 2089.709308] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 2092.976187] PM: Syncing filesystems ... done. [ 2093.004455] PM: Preparing system for sleep (mem) [ 2093.006616] Freezing user space processes ... (elapsed 0.193 seconds) done. [ 2093.199647] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 2093.202222] PM: Suspending system (mem) [ 2093.202346] Suspending console(s) (use no_console_suspend to debug) [ 2093.308707] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 2093.311496] sd 2:0:0:0: [sda] Stopping disk [ 2093.358434] e1000e: EEE TX LPI TIMER: 00000011 [ 2093.358752] ACPI : EC: event blocked [ 2093.470941] PM: suspend of devices complete after 164.023 msecs [ 2093.470946] PM: suspend devices took 0.268 seconds [ 2093.490266] PM: late suspend of devices complete after 19.314 msecs [ 2093.492028] ACPI : EC: interrupt blocked [ 2093.493426] e1000e 0000:00:1f.6: System wakeup enabled by ACPI [ 2093.495097] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 2093.520325] PM: noirq suspend of devices complete after 30.053 msecs [ 2093.521665] ACPI: Preparing to enter system sleep state S3 [ 2093.525171] ACPI : EC: EC stopped [ 2093.525173] PM: Saving platform NVS memory [ 2093.525223] Disabling non-boot CPUs ... [ 2093.528196] smpboot: CPU 1 is now offline [ 2093.531942] smpboot: CPU 2 is now offline [ 2093.535414] smpboot: CPU 3 is now offline [ 2093.539319] ACPI: Low-level resume complete [ 2093.539431] ACPI : EC: EC started [ 2093.539431] PM: Restoring platform NVS memory [ 2093.540151] Suspended for 4174.000 seconds [ 2093.541303] Enabling non-boot CPUs ... [ 2093.541333] x86: Booting SMP configuration: [ 2093.541334] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2093.542120] cache: parent cpu1 should not be sleeping [ 2093.542181] microcode: sig=0x406e3, pf=0x80, revision=0x94 [ 2093.543209] microcode: updated to revision 0xba, date = 2017-04-09 [ 2093.543318] CPU1 is up [ 2093.543336] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 2093.544016] cache: parent cpu2 should not be sleeping [ 2093.544078] microcode: sig=0x406e3, pf=0x80, revision=0xba [ 2093.544177] CPU2 is up [ 2093.544195] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 2093.544756] cache: parent cpu3 should not be sleeping [ 2093.544956] CPU3 is up [ 2093.547897] ACPI: Waking up from system sleep state S3 [ 2093.558248] acpi LNXPOWER:17: Turning OFF [ 2093.558278] acpi LNXPOWER:16: Turning OFF [ 2093.558306] acpi LNXPOWER:15: Turning OFF [ 2093.558334] acpi LNXPOWER:14: Turning OFF [ 2093.558361] acpi LNXPOWER:13: Turning OFF [ 2093.558389] acpi LNXPOWER:12: Turning OFF [ 2093.558417] acpi LNXPOWER:11: Turning OFF [ 2093.558445] acpi LNXPOWER:10: Turning OFF [ 2093.558472] acpi LNXPOWER:0f: Turning OFF [ 2093.558500] acpi LNXPOWER:0e: Turning OFF [ 2093.558528] acpi LNXPOWER:0d: Turning OFF [ 2093.558556] acpi LNXPOWER:0c: Turning OFF [ 2093.558584] acpi LNXPOWER:0b: Turning OFF [ 2093.558612] acpi LNXPOWER:0a: Turning OFF [ 2093.558641] acpi LNXPOWER:09: Turning OFF [ 2093.558669] acpi LNXPOWER:08: Turning OFF [ 2093.558696] acpi LNXPOWER:07: Turning OFF [ 2093.558724] acpi LNXPOWER:06: Turning OFF [ 2093.558752] acpi LNXPOWER:05: Turning OFF [ 2093.558934] acpi LNXPOWER:03: Turning OFF [ 2093.559118] ACPI : EC: interrupt unblocked [ 2093.584109] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 2093.584307] PM: noirq resume of devices complete after 25.351 msecs [ 2093.589311] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9cd1dd4e58 (20170119/exresop-593) [ 2093.589318] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 2093.589324] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.589334] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.590590] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9cd1dd4a68 (20170119/exresop-593) [ 2093.590594] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 2093.590599] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.590607] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.592745] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9cd1dd4ee8 (20170119/exresop-593) [ 2093.592752] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 2093.592758] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.592768] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.594050] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9cd1dd4e10 (20170119/exresop-593) [ 2093.594055] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 2093.594061] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.594069] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2093.600228] PM: early resume of devices complete after 15.783 msecs [ 2093.600828] e1000e 0000:00:1f.6: System wakeup disabled by ACPI [ 2093.601344] sd 2:0:0:0: [sda] Starting disk [ 2093.656755] [drm] GuC firmware load skipped [ 2093.662020] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout [ 2093.702036] pciehp 0000:00:1c.0:pcie004: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add [ 2093.702038] pciehp 0000:00:1c.0:pcie004: Cannot add device at 0000:01:00 [ 2093.908666] ata1: SATA link down (SStatus 4 SControl 300) [ 2093.908695] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2093.911915] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 2093.911919] ata3.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2093.913120] ata3.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out [ 2093.913125] ata3.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 2093.913523] ata3.00: configured for UDMA/100 [ 2093.938698] usb 1-9: reset high-speed USB device number 5 using xhci_hcd [ 2094.218376] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [ 2094.763315] ACPI : EC: event unblocked [ 2094.763788] ACPI : button: The lid device is not compliant to SW_LID. [ 2094.763873] rtc_cmos 00:03: System wakeup disabled by ACPI [ 2094.767952] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9ba6ff4948 (20170119/exresop-593) [ 2094.767970] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 2094.767978] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2094.767992] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2094.769554] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9e9b7b171750 (20170119/exresop-593) [ 2094.769562] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170119/dswexec-461) [ 2094.769571] ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9e9ce08a3960), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2094.769586] ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9e9ce08a3028), AE_AML_OPERAND_TYPE (20170119/psparse-543) [ 2094.770036] PM: resume of devices complete after 1169.838 msecs [ 2094.770248] usb 1-7:1.0: rebind failed: -517 [ 2094.770253] usb 1-7:1.1: rebind failed: -517 [ 2094.770601] PM: resume devices took 1.170 seconds [ 2094.770772] PM: Finishing wakeup. [ 2094.770774] Restarting tasks ... [ 2094.772438] [drm] RC6 on [ 2094.775095] done. [ 2094.786803] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 2094.793654] Bluetooth: hci0: Device revision is 5 [ 2094.793658] Bluetooth: hci0: Secure boot is enabled [ 2094.793659] Bluetooth: hci0: OTP lock is enabled [ 2094.793661] Bluetooth: hci0: API lock is enabled [ 2094.793661] Bluetooth: hci0: Debug lock is disabled [ 2094.793662] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 2095.490269] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 2095.541823] thermal thermal_zone8: failed to read out thermal zone (-5) [ 2095.662605] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 2095.662608] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 2095.802196] e1000e 0000:00:1f.6: Failed to restore TIMINCA clock rate delta: -22 [ 2095.805123] e1000e: enp0s31f6 NIC Link is Down [ 2095.810675] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 2096.022095] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 2096.023723] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 2096.026022] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.027219] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.077041] psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758] [ 2096.107350] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..] [ 2096.156460] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.156908] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.244795] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 2096.259069] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.259894] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.389149] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.389599] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 2096.478867] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 2096.565536] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 2097.058920] Bluetooth: hci0: Waiting for firmware download to complete [ 2097.059549] Bluetooth: hci0: Firmware loaded in 2233246 usecs [ 2097.059646] Bluetooth: hci0: Waiting for device to boot [ 2097.070614] Bluetooth: hci0: Device booted in 10732 usecs [ 2097.071073] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 2097.074611] Bluetooth: hci0: Applying Intel DDC parameters completed [ 2097.542233] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 2097.542244] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 2097.542314] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 2099.971240] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 2100.207896] wlp2s0: authenticate with f0:5c:19:66:dc:52 [ 2100.215481] wlp2s0: send auth to f0:5c:19:66:dc:52 (try 1/3) [ 2100.220966] wlp2s0: authenticated [ 2100.221864] wlp2s0: associate with f0:5c:19:66:dc:52 (try 1/3) [ 2100.222890] wlp2s0: RX AssocResp from f0:5c:19:66:dc:52 (capab=0x11 status=0 aid=1) [ 2100.225837] wlp2s0: associated [ 2100.225873] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 2100.276699] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by f0:5c:19:66:dc:52 [ 2111.101812] mei_wdt mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02: Could not reg notif event ret=-22 [ 2111.102539] mei_wdt: probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:02 failed with error -22 [ 5308.553095] wlp2s0: disconnect from AP f0:5c:19:66:dc:52 for new auth to f0:5c:19:66:dc:42 [ 5308.562021] wlp2s0: authenticate with f0:5c:19:66:dc:42 [ 5308.570531] wlp2s0: send auth to f0:5c:19:66:dc:42 (try 1/3) [ 5308.683919] wlp2s0: send auth to f0:5c:19:66:dc:42 (try 2/3) [ 5308.795270] wlp2s0: send auth to f0:5c:19:66:dc:42 (try 3/3) [ 5308.899812] wlp2s0: authentication with f0:5c:19:66:dc:42 timed out [ 5309.256717] wlp2s0: authenticate with f0:5c:19:66:dc:52 [ 5309.266628] wlp2s0: send auth to f0:5c:19:66:dc:52 (try 1/3) [ 5309.268195] wlp2s0: authenticated [ 5309.270608] wlp2s0: associate with f0:5c:19:66:dc:52 (try 1/3) [ 5309.271642] wlp2s0: RX AssocResp from f0:5c:19:66:dc:52 (capab=0x11 status=0 aid=1) [ 5309.273742] wlp2s0: associated [ 5309.304277] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by f0:5c:19:66:dc:52 [ 5482.271216] [drm] GPU HANG: ecode 9:0:0x85dffffb, in Xorg [10945], reason: Hang on render ring, action: reset [ 5482.271218] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 5482.271218] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 5482.271219] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 5482.271219] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 5482.271219] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 5482.271253] drm/i915: Resetting chip after gpu hang [ 5482.271362] [drm] RC6 on [ 5482.287887] [drm] GuC firmware load skipped [ 5490.262321] drm/i915: Resetting chip after gpu hang [ 5490.262424] [drm] RC6 on [ 5490.274429] [drm] GuC firmware load skipped [ 5502.294000] drm/i915: Resetting chip after gpu hang [ 5502.294112] [drm] RC6 on [ 5502.308218] [drm] GuC firmware load skipped [ 5510.293738] drm/i915: Resetting chip after gpu hang [ 5510.293836] [drm] RC6 on [ 5510.309840] [drm] GuC firmware load skipped [ 5518.293511] drm/i915: Resetting chip after gpu hang [ 5518.293607] [drm] RC6 on [ 5518.310936] [drm] GuC firmware load skipped [ 5518.846879] show_signal_msg: 4 callbacks suppressed [ 5518.846882] gnome-session-f[15771]: segfault at 0 ip 00007febc00b14b9 sp 00007ffe034870d0 error 4 in libgtk-3.so.0.2200.15[7febbfdd2000+6f9000]