[ 0.000000] Linux version 4.13.0-rc2-drm-tip-ww30-commit-30d8319+ (gfx@bifrost) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP PREEMPT Mon Jul 24 10:03:51 CDT 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-rc2-drm-tip-ww30-commit-30d8319+ root=UUID=f869e850-fa74-451a-a1a4-4b76793f1022 ro quiet splash fastboot drm.debug=0xe vt.handoff=7 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009a5eafff] usable [ 0.000000] BIOS-e820: [mem 0x000000009a5eb000-0x000000009aab5fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aab6000-0x00000000a228efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a228f000-0x00000000a234afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a234b000-0x00000000a2370fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a2371000-0x00000000a2ca0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a2ca1000-0x00000000a2f9ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a2fa0000-0x00000000a2ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000a2fff000-0x00000000a2ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a3800000-0x00000000a7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000456ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xa2352000 ACPI 2.0=0xa2352000 ESRT=0xa2ee6918 SMBIOS=0xf05e0 MPS=0xfc970 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: No reference (HPET/PMTIMER) available [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x457000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00A0000000 mask 7FFE000000 write-back [ 0.000000] 3 base 00A2000000 mask 7FFF000000 write-back [ 0.000000] 4 base 0100000000 mask 7F00000000 write-back [ 0.000000] 5 base 0200000000 mask 7E00000000 write-back [ 0.000000] 6 base 0400000000 mask 7F80000000 write-back [ 0.000000] 7 base 0460000000 mask 7FE0000000 uncachable [ 0.000000] 8 base 0458000000 mask 7FF8000000 uncachable [ 0.000000] 9 base 0457000000 mask 7FFF000000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xa3000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xa3000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000a2ee6918 to 0x00000000a2ee6950. [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x056c2000, 0x056c2fff] PGTABLE [ 0.000000] BRK [0x056c3000, 0x056c3fff] PGTABLE [ 0.000000] BRK [0x056c4000, 0x056c4fff] PGTABLE [ 0.000000] BRK [0x056c5000, 0x056c5fff] PGTABLE [ 0.000000] BRK [0x056c6000, 0x056c6fff] PGTABLE [ 0.000000] BRK [0x056c7000, 0x056c7fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x36953000-0x374a0fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000A2352000 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000A2352090 0000A4 (v01 INTEL NUC5i7RY 0000016C AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000A2368058 00010C (v05 INTEL NUC5i7RY 0000016C AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000A23521C8 015E8C (v02 INTEL NUC5i7RY 0000016C INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000A2C9FF80 000040 [ 0.000000] ACPI: APIC 0x00000000A2368168 000084 (v03 INTEL NUC5i7RY 0000016C AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000A23681F0 000044 (v01 INTEL NUC5i7RY 0000016C AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000A2368238 00009C (v01 INTEL NUC5i7RY 0000016C AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000A23682D8 00003C (v01 INTEL NUC5i7RY 0000016C MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000A2368318 000038 (v01 INTEL NUC5i7RY 0000016C AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x00000000A2368350 000315 (v01 INTEL NUC5i7RY 0000016C INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000A2368668 000042 (v01 INTEL NUC5i7RY 0000016C 00000000) [ 0.000000] ACPI: LPIT 0x00000000A23686B0 000094 (v01 INTEL NUC5i7RY 0000016C 00000000) [ 0.000000] ACPI: SSDT 0x00000000A2368748 000C7D (v02 INTEL NUC5i7RY 0000016C INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000A23693C8 0000A0 (v32 INTEL NUC5i7RY 0000016C TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000A2369468 000539 (v02 INTEL NUC5i7RY 0000016C INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A23699A8 000B74 (v02 INTEL NUC5i7RY 0000016C INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000A236A520 005AFE (v02 INTEL NUC5i7RY 0000016C INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000A2370020 0000D4 (v01 INTEL NUC5i7RY 0000016C INTL 00000001) [ 0.000000] ACPI: BGRT 0x00000000A23700F8 000038 (v01 INTEL NUC5i7RY 0000016C AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000456ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009a5eafff] [ 0.000000] node 0: [mem 0x000000009aab6000-0x00000000a228efff] [ 0.000000] node 0: [mem 0x00000000a2fff000-0x00000000a2ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000456ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000456ffffff] [ 0.000000] On node 0 totalpages: 4164962 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10296 pages used for memmap [ 0.000000] DMA32 zone: 658885 pages, LIFO batch:31 [ 0.000000] Normal zone: 54720 pages used for memmap [ 0.000000] Normal zone: 3502080 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000a4000000-0x00000000a7ffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl edge lint[0x24]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low res lint[0xe8]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x24]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl res lint[0x8b]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x25 (or later) [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9a5eb000-0x9aab5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa228f000-0xa234afff] [ 0.000000] PM: Registered nosave memory: [mem 0xa234b000-0xa2370fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2371000-0xa2ca0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2ca1000-0xa2f9ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa2fa0000-0xa2ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa3000000-0xa37fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa3800000-0xa7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xa8000000-0xf7ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 37 pages/cpu @ffff880456c00000 s114632 r8192 d28728 u524288 [ 0.000000] pcpu-alloc: s114632 r8192 d28728 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4099856 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-rc2-drm-tip-ww30-commit-30d8319+ root=UUID=f869e850-fa74-451a-a1a4-4b76793f1022 ro quiet splash fastboot drm.debug=0xe vt.handoff=7 [ 0.000000] log_buf_len individual max cpu contribution: 262144 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 786432 bytes [ 0.000000] log_buf_len min size: 262144 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 249716(95%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Memory: 16208148K/16659848K available (8741K kernel code, 1390K rwdata, 3516K rodata, 1188K init, 22636K bss, 451700K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU callback double-/use-after-free debug enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] NR_IRQS: 4352, nr_irqs: 728, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8159 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] kmemleak: Early log buffer exceeded (2911), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.001000] spurious 8259A interrupt: IRQ7. [ 0.003000] tsc: Unable to calibrate against PIT [ 0.003000] tsc: using HPET reference calibration [ 0.003000] tsc: Detected 3092.844 MHz processor [ 0.003000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.68 BogoMIPS (lpj=3092844) [ 0.003000] pid_max: default: 32768 minimum: 301 [ 0.003000] ACPI: Core revision 20170531 [ 0.163341] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.163921] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.163946] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.164509] CPU: Physical Processor ID: 0 [ 0.164510] CPU: Processor Core ID: 0 [ 0.164513] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.164514] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.164518] mce: CPU supports 7 MCE banks [ 0.164531] CPU0: Thermal monitoring enabled (TM1) [ 0.164552] process: using mwait in idle threads [ 0.164554] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.164555] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.164666] Freeing SMP alternatives memory: 32K [ 0.169675] smpboot: Max logical packages: 2 [ 0.169681] DMAR: Host address width 39 [ 0.169682] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.169702] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.169703] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.169728] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.169729] DMAR: RMRR base: 0x000000a2ef6000 end: 0x000000a2f06fff [ 0.169734] DMAR: RMRR base: 0x000000a3800000 end: 0x000000a7ffffff [ 0.169738] DMAR: ANDD device: 2 name: \_SB.PCI0.SDHC [ 0.169740] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.169741] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.169742] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.169743] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.170262] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.170264] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.171000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.181000] smpboot: CPU0: Intel(R) Core(TM) i7-5557U CPU @ 3.10GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.184050] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.184085] ... version: 3 [ 0.184086] ... bit width: 48 [ 0.184087] ... generic registers: 4 [ 0.184088] ... value mask: 0000ffffffffffff [ 0.184089] ... max period: 00007fffffffffff [ 0.184090] ... fixed-purpose events: 3 [ 0.184091] ... event mask: 000000070000000f [ 0.186020] Hierarchical SRCU implementation. [ 0.190233] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.192004] smp: Bringing up secondary CPUs ... [ 0.200073] x86: Booting SMP configuration: [ 0.200076] .... node #0, CPUs: #1 #2 #3 [ 0.396038] smp: Brought up 1 node, 4 CPUs [ 0.396038] smpboot: Total of 4 processors activated (24740.87 BogoMIPS) [ 0.398199] devtmpfs: initialized [ 0.399090] PM: Registering ACPI NVS region [mem 0xa2371000-0xa2ca0fff] (9633792 bytes) [ 0.403066] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.403066] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.403156] xor: automatically using best checksumming function avx [ 0.403160] pinctrl core: initialized pinctrl subsystem [ 0.404120] NET: Registered protocol family 16 [ 0.405035] cpuidle: using governor menu [ 0.405035] PCCT header not found. [ 0.405129] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.405135] ACPI: bus type PCI registered [ 0.405330] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.405332] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.405357] PCI: Using configuration type 1 for base access [ 0.413245] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.430970] raid6: sse2x1 gen() 9253 MB/s [ 0.447969] raid6: sse2x1 xor() 6976 MB/s [ 0.464972] raid6: sse2x2 gen() 11320 MB/s [ 0.481975] raid6: sse2x2 xor() 7644 MB/s [ 0.498971] raid6: sse2x4 gen() 13406 MB/s [ 0.515970] raid6: sse2x4 xor() 9267 MB/s [ 0.532958] raid6: avx2x1 gen() 18214 MB/s [ 0.549968] raid6: avx2x1 xor() 13347 MB/s [ 0.566969] raid6: avx2x2 gen() 21136 MB/s [ 0.583956] raid6: avx2x2 xor() 14119 MB/s [ 0.600969] raid6: avx2x4 gen() 24511 MB/s [ 0.617967] raid6: avx2x4 xor() 17279 MB/s [ 0.617969] raid6: using algorithm avx2x4 gen() 24511 MB/s [ 0.617970] raid6: .... xor() 17279 MB/s, rmw enabled [ 0.617971] raid6: using avx2x2 recovery algorithm [ 0.618092] ACPI: Added _OSI(Module Device) [ 0.618094] ACPI: Added _OSI(Processor Device) [ 0.618095] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.618096] ACPI: Added _OSI(Processor Aggregator Device) [ 0.625261] ACPI: Executed 18 blocks of module-level executable AML code [ 0.697985] ACPI: Dynamic OEM Table Load: [ 0.698004] ACPI: SSDT 0xFFFF88044389CFB8 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.700959] ACPI: Dynamic OEM Table Load: [ 0.700969] ACPI: SSDT 0xFFFF880443834138 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.705405] ACPI: Dynamic OEM Table Load: [ 0.705415] ACPI: SSDT 0xFFFF8804438ECD48 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.721465] ACPI: Interpreter enabled [ 0.721582] ACPI: (supports S0 S3 S4 S5) [ 0.721584] ACPI: Using IOAPIC for interrupt routing [ 0.721751] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.753502] ACPI: Power Resource [PG00] (on) [ 0.757294] ACPI: Power Resource [PG01] (on) [ 0.761115] ACPI: Power Resource [PG02] (on) [ 0.780703] ACPI: Power Resource [WRST] (off) [ 0.783599] ACPI: Power Resource [WRST] (off) [ 0.786459] ACPI: Power Resource [WRST] (off) [ 0.789790] ACPI: Power Resource [WRST] (off) [ 0.792737] ACPI: Power Resource [WRST] (off) [ 0.795577] ACPI: Power Resource [WRST] (off) [ 0.798389] ACPI: Power Resource [WRST] (off) [ 0.801205] ACPI: Power Resource [WRST] (off) [ 0.890003] ACPI: Power Resource [FN00] (off) [ 0.890692] ACPI: Power Resource [FN01] (off) [ 0.891408] ACPI: Power Resource [FN02] (off) [ 0.892090] ACPI: Power Resource [FN03] (off) [ 0.892755] ACPI: Power Resource [FN04] (off) [ 0.901668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.901680] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.902831] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.906589] PCI host bridge to bus 0000:00 [ 0.906593] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.906598] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.906601] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.906604] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xdfffffff window] [ 0.906607] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window] [ 0.906610] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.906627] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.907236] pci 0000:00:02.0: [8086:162b] type 00 class 0x030000 [ 0.907248] pci 0000:00:02.0: reg 0x10: [mem 0xa9000000-0xa9ffffff 64bit] [ 0.907253] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.907258] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.908091] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.908100] pci 0000:00:03.0: reg 0x10: [mem 0xaa134000-0xaa137fff 64bit] [ 0.908733] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.908751] pci 0000:00:14.0: reg 0x10: [mem 0xaa120000-0xaa12ffff 64bit] [ 0.908837] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.909430] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.909451] pci 0000:00:16.0: reg 0x10: [mem 0xaa13d000-0xaa13d01f 64bit] [ 0.909560] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.910577] pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000 [ 0.910593] pci 0000:00:19.0: reg 0x10: [mem 0xaa100000-0xaa11ffff] [ 0.910600] pci 0000:00:19.0: reg 0x14: [mem 0xaa13b000-0xaa13bfff] [ 0.910607] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.910704] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.911283] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.911299] pci 0000:00:1b.0: reg 0x10: [mem 0xaa130000-0xaa133fff 64bit] [ 0.911376] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.912182] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.912311] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.912348] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.912350] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.913496] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.913628] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.913658] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.913660] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.914789] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.914809] pci 0000:00:1d.0: reg 0x10: [mem 0xaa13a000-0xaa13a3ff] [ 0.914918] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.915493] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.916199] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.916213] pci 0000:00:1f.2: reg 0x10: [io 0x30d0-0x30d7] [ 0.916219] pci 0000:00:1f.2: reg 0x14: [io 0x30c0-0x30c3] [ 0.916225] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7] [ 0.916231] pci 0000:00:1f.2: reg 0x1c: [io 0x30a0-0x30a3] [ 0.916249] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.916257] pci 0000:00:1f.2: reg 0x24: [mem 0xaa139000-0xaa1397ff] [ 0.916308] pci 0000:00:1f.2: PME# supported from D3hot [ 0.916864] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.916880] pci 0000:00:1f.3: reg 0x10: [mem 0xaa138000-0xaa1380ff 64bit] [ 0.916897] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f] [ 0.917613] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.919335] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.922815] pci 0000:02:00.0: reg 0x10: [mem 0xaa000000-0xaa001fff 64bit] [ 0.933493] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.943977] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.945010] pci 0000:00:1c.3: bridge window [mem 0xaa000000-0xaa0fffff] [ 0.945047] pci_bus 0000:00: on NUMA node 0 [ 0.952881] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.953427] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.953983] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.954539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.955086] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.955631] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.956191] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.956750] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.959488] ACPI: Enabled 4 GPEs in block 00 to 7F [ 0.959813] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.959813] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.959813] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.959813] vgaarb: loaded [ 0.960379] SCSI subsystem initialized [ 0.960425] libata version 3.00 loaded. [ 0.960425] ACPI: bus type USB registered [ 0.960425] usbcore: registered new interface driver usbfs [ 0.960425] usbcore: registered new interface driver hub [ 0.960425] usbcore: registered new device driver usb [ 0.961114] Registered efivars operations [ 0.964378] Advanced Linux Sound Architecture Driver Initialized. [ 0.964378] PCI: Using ACPI for IRQ routing [ 0.966175] PCI: pci_cache_line_size set to 64 bytes [ 0.966551] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.966571] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.966575] e820: reserve RAM buffer [mem 0x9a5eb000-0x9bffffff] [ 0.966578] e820: reserve RAM buffer [mem 0xa228f000-0xa3ffffff] [ 0.966581] e820: reserve RAM buffer [mem 0xa3000000-0xa3ffffff] [ 0.966599] e820: reserve RAM buffer [mem 0x457000000-0x457ffffff] [ 0.967078] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.967080] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.969037] clocksource: Switched to clocksource hpet [ 1.025805] pnp: PnP ACPI init [ 1.026907] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 1.026924] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.028746] pnp 00:01: Plug and Play ACPI device, IDs NTN0530 (active) [ 1.029248] system 00:02: [io 0x0680-0x069f] has been reserved [ 1.029253] system 00:02: [io 0xffff] has been reserved [ 1.029257] system 00:02: [io 0xffff] has been reserved [ 1.029261] system 00:02: [io 0xffff] has been reserved [ 1.029265] system 00:02: [io 0x1800-0x18fe] has been reserved [ 1.029269] system 00:02: [io 0x164e-0x164f] has been reserved [ 1.029273] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.029536] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.029783] system 00:04: [io 0x1854-0x1857] has been reserved [ 1.029787] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.031368] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.031372] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.031377] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.031381] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.031385] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.031388] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.031396] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.031412] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.031416] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 1.031422] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.031426] system 00:05: [mem 0xa8010000-0xa801ffff] has been reserved [ 1.031432] system 00:05: [mem 0xa8000000-0xa800ffff] has been reserved [ 1.031436] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.035771] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 1.035775] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 1.035779] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved [ 1.035783] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved [ 1.035799] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved [ 1.035803] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.040163] pnp: PnP ACPI: found 7 devices [ 1.052970] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.052996] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.053034] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.053038] pci 0000:00:1c.3: bridge window [mem 0xaa000000-0xaa0fffff] [ 1.053046] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.053047] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.053049] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.053050] pci_bus 0000:00: resource 7 [mem 0xa8000000-0xdfffffff window] [ 1.053051] pci_bus 0000:00: resource 8 [mem 0xfe000000-0xfe113fff window] [ 1.053053] pci_bus 0000:02: resource 1 [mem 0xaa000000-0xaa0fffff] [ 1.053841] NET: Registered protocol family 2 [ 1.054334] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.054454] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 1.057030] TCP: Hash tables configured (established 131072 bind 65536) [ 1.057255] UDP hash table entries: 8192 (order: 8, 1310720 bytes) [ 1.058000] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes) [ 1.058895] NET: Registered protocol family 1 [ 1.058917] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.078931] PCI: CLS 0 bytes, default 64 [ 1.079175] Unpacking initramfs... [ 1.257900] Freeing initrd memory: 11576K [ 1.257994] DMAR: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0 [ 1.258034] DMAR: No ATSR found [ 1.258569] DMAR: dmar0: Using Queued invalidation [ 1.258604] DMAR: dmar1: Using Queued invalidation [ 1.258626] DMAR: Setting RMRR: [ 1.258797] DMAR: Setting identity map for device 0000:00:02.0 [0xa3800000 - 0xa7ffffff] [ 1.258953] DMAR: Setting identity map for device 0000:00:14.0 [0xa2ef6000 - 0xa2f06fff] [ 1.259113] DMAR: Setting identity map for device 0000:00:1d.0 [0xa2ef6000 - 0xa2f06fff] [ 1.259144] DMAR: Prepare 0-16MiB unity mapping for LPC [ 1.259267] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 1.259296] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.259549] iommu: Adding device 0000:00:00.0 to group 0 [ 1.259595] iommu: Adding device 0000:00:02.0 to group 1 [ 1.259641] iommu: Adding device 0000:00:03.0 to group 2 [ 1.259673] iommu: Adding device 0000:00:14.0 to group 3 [ 1.259710] iommu: Adding device 0000:00:16.0 to group 4 [ 1.259753] iommu: Adding device 0000:00:19.0 to group 5 [ 1.259797] iommu: Adding device 0000:00:1b.0 to group 6 [ 1.259831] iommu: Adding device 0000:00:1c.0 to group 7 [ 1.259874] iommu: Adding device 0000:00:1c.3 to group 8 [ 1.259921] iommu: Adding device 0000:00:1d.0 to group 9 [ 1.259965] iommu: Adding device 0000:00:1f.0 to group 10 [ 1.259988] iommu: Adding device 0000:00:1f.2 to group 10 [ 1.260033] iommu: Adding device 0000:00:1f.3 to group 10 [ 1.260077] iommu: Adding device 0000:02:00.0 to group 11 [ 1.268716] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 1.268717] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 1.268718] RAPL PMU: hw unit of domain package 2^-14 Joules [ 1.268719] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 1.268720] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 1.273546] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.285852] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.295970] NET: Registered protocol family 38 [ 1.296149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.296168] io scheduler noop registered [ 1.296367] io scheduler cfq registered (default) [ 1.296369] io scheduler mq-deadline registered [ 1.296370] io scheduler kyber registered [ 1.299377] uvesafb: failed to execute /sbin/v86d [ 1.299387] uvesafb: make sure that the v86d helper is installed and executable [ 1.299400] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 1.299411] uvesafb: vbe_init() failed with -22 [ 1.299433] uvesafb: probe of uvesafb.0 failed with error -22 [ 1.299491] intel_idle: MWAIT substates: 0x11142120 [ 1.299493] intel_idle: v0.4.1 model 0x3D [ 1.300674] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.301124] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.301181] ACPI: Sleep Button [SLPB] [ 1.301346] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.301377] ACPI: Power Button [PWRB] [ 1.301558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.301683] ACPI: Power Button [PWRF] [ 1.307647] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 1.309146] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.309148] ACPI: Thermal Zone [TZ00] (28 C) [ 1.311524] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.311526] ACPI: Thermal Zone [TZ01] (30 C) [ 1.311772] GHES: HEST is not enabled! [ 1.311979] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.314520] Non-volatile memory driver v1.3 [ 1.314725] Linux agpgart interface v0.103 [ 1.316617] loop: module loaded [ 1.317230] ahci 0000:00:1f.2: version 3.0 [ 1.328317] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 1.328320] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.331970] scsi host0: ahci [ 1.332731] scsi host1: ahci [ 1.333299] scsi host2: ahci [ 1.333829] scsi host3: ahci [ 1.334153] ata1: SATA max UDMA/133 abar m2048@0xaa139000 port 0xaa139100 irq 42 [ 1.334155] ata2: DUMMY [ 1.334156] ata3: DUMMY [ 1.334157] ata4: DUMMY [ 1.334356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.334385] ehci-pci: EHCI PCI platform driver [ 1.335346] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.335410] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.335467] ehci-pci 0000:00:1d.0: debug port 2 [ 1.339433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.339503] ehci-pci 0000:00:1d.0: irq 23, io mem 0xaa13a000 [ 1.346060] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.346375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.346379] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.346380] usb usb1: Product: EHCI Host Controller [ 1.346394] usb usb1: Manufacturer: Linux 4.13.0-rc2-drm-tip-ww30-commit-30d8319+ ehci_hcd [ 1.346395] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.347086] hub 1-0:1.0: USB hub found [ 1.347162] hub 1-0:1.0: 2 ports detected [ 1.348171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.348181] ohci-pci: OHCI PCI platform driver [ 1.348211] uhci_hcd: USB Universal Host Controller Interface driver [ 1.349220] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.349236] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.350469] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 1.350473] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.350808] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.350810] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.350811] usb usb2: Product: xHCI Host Controller [ 1.350813] usb usb2: Manufacturer: Linux 4.13.0-rc2-drm-tip-ww30-commit-30d8319+ xhci-hcd [ 1.350814] usb usb2: SerialNumber: 0000:00:14.0 [ 1.351282] hub 2-0:1.0: USB hub found [ 1.351344] hub 2-0:1.0: 11 ports detected [ 1.374635] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.374645] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.374875] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.374877] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.374879] usb usb3: Product: xHCI Host Controller [ 1.374880] usb usb3: Manufacturer: Linux 4.13.0-rc2-drm-tip-ww30-commit-30d8319+ xhci-hcd [ 1.374881] usb usb3: SerialNumber: 0000:00:14.0 [ 1.375518] hub 3-0:1.0: USB hub found [ 1.375588] hub 3-0:1.0: 4 ports detected [ 1.385117] usbcore: registered new interface driver usb-storage [ 1.385317] i8042: PNP: No PS/2 controller found. [ 1.385536] mousedev: PS/2 mouse device common for all mice [ 1.386232] rtc_cmos 00:03: RTC can wake from S4 [ 1.386584] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.386627] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.386993] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.387429] device-mapper: uevent: version 1.0.3 [ 1.387846] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com [ 1.387852] intel_pstate: Intel P-state driver initializing [ 1.392624] EFI Variables Facility v0.08 2004-May-17 [ 1.401909] hidraw: raw HID events driver (C) Jiri Kosina [ 1.402265] usbcore: registered new interface driver usbhid [ 1.402266] usbhid: USB HID core driver [ 1.402534] intel_rapl: Found RAPL domain package [ 1.402538] intel_rapl: Found RAPL domain core [ 1.402539] intel_rapl: Found RAPL domain uncore [ 1.402541] intel_rapl: Found RAPL domain dram [ 1.403779] Initializing XFRM netlink socket [ 1.404599] NET: Registered protocol family 10 [ 1.405758] Segment Routing with IPv6 [ 1.405798] mip6: Mobile IPv6 [ 1.405807] NET: Registered protocol family 17 [ 1.405817] NET: Registered protocol family 15 [ 1.405818] start plist test [ 1.407197] end plist test [ 1.408136] AVX2 version of gcm_enc/dec engaged. [ 1.408138] AES CTR mode by8 optimization enabled [ 1.440388] alg: No test for pcbc(aes) (pcbc-aes-aesni) [ 1.440416] sched_clock: Marking stable (1440398073, 0)->(1542033737, -101635664) [ 1.441041] registered taskstats version 1 [ 1.442908] Btrfs loaded, crc32c=crc32c-generic [ 1.446759] rtc_cmos 00:03: setting system clock to 2017-07-25 18:36:19 UTC (1501007779) [ 1.447172] PM: Hibernation image not present or could not be loaded. [ 1.447184] ALSA device list: [ 1.447185] No soundcards found. [ 1.646341] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.650222] ata1.00: ATA-10: INTEL SSDSC2BW120H6, RG20, max UDMA/133 [ 1.650228] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.656124] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.685071] ata1.00: configured for UDMA/133 [ 1.686446] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 RG20 PQ: 0 ANSI: 5 [ 1.688771] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.688862] sd 0:0:0:0: [sda] Write Protect is off [ 1.688874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.688989] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.690089] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.696195] sda: sda1 sda2 sda3 [ 1.697577] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.698975] Freeing unused kernel memory: 1188K [ 1.698989] Write protecting the kernel read-only data: 14336k [ 1.699888] Freeing unused kernel memory: 1484K [ 1.701064] Freeing unused kernel memory: 580K [ 1.740059] usb 2-7: new full-speed USB device number 2 using xhci_hcd [ 1.775592] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 1.775597] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.776612] hub 1-1:1.0: USB hub found [ 1.776829] hub 1-1:1.0: 8 ports detected [ 1.863456] sdhci: Secure Digital Host Controller Interface driver [ 1.863459] sdhci: Copyright(c) Pierre Ossman [ 1.899124] pps_core: LinuxPPS API ver. 1 registered [ 1.899126] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.899836] PTP clock support registered [ 1.901306] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.901307] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.902498] [drm:i915_driver_load [i915]] Found WildcatPoint LP PCH [ 1.902550] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 1.903816] [drm:intel_device_info_dump [i915]] i915 device info: platform=BROADWELL gen=8 pciid=0x162b rev=0x09 [ 1.903863] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no [ 1.903909] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no [ 1.903937] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no [ 1.903958] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes [ 1.903993] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes [ 1.904020] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no [ 1.904075] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes [ 1.904105] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes [ 1.904145] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: yes [ 1.904189] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes [ 1.904217] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes [ 1.904237] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes [ 1.904259] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: yes [ 1.904302] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes [ 1.904343] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no [ 1.904372] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no [ 1.904401] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no [ 1.904442] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes [ 1.904484] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no [ 1.904513] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes [ 1.904542] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes [ 1.904583] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no [ 1.904612] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no [ 1.904652] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no [ 1.904681] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes [ 1.904721] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes [ 1.904750] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no [ 1.904791] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes [ 1.904820] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes [ 1.904849] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no [ 1.904889] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no [ 1.904929] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no [ 1.904957] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no [ 1.904982] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no [ 1.905018] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no [ 1.905268] [drm:intel_device_info_runtime_init [i915]] slice mask: 0003 [ 1.905305] [drm:intel_device_info_runtime_init [i915]] slice total: 2 [ 1.905342] [drm:intel_device_info_runtime_init [i915]] subslice total: 6 [ 1.905367] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007 [ 1.905393] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3 [ 1.905430] [drm:intel_device_info_runtime_init [i915]] EU total: 48 [ 1.905455] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 8 [ 1.905493] [drm:intel_device_info_runtime_init [i915]] has slice power gating: y [ 1.905518] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n [ 1.905544] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n [ 1.905580] [drm:i915_driver_load [i915]] ppgtt mode: 3 [ 1.905606] [drm:i915_driver_load [i915]] use GPU semaphores? no [ 1.905650] [drm] Memory usable by graphics device = 4096M [ 1.905677] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 1.905700] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M [ 1.905701] [drm] VT-d active for gfx access [ 1.905728] [drm] Replacing VGA console driver [ 1.905797] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K [ 1.905860] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xa2c9a018 [ 1.905906] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 1.905935] [drm:intel_opregion_setup [i915]] SWSCI supported [ 1.909573] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a [ 1.909576] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.911135] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700483 [ 1.911171] [drm:intel_opregion_setup [i915]] ASLE supported [ 1.911202] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 1.911235] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 1.911396] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 1.911404] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.911406] [drm] Driver supports precise vblank timestamp query. [ 1.911447] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 1.911485] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL ", BDB version 189 [ 1.911521] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.911553] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 1.915127] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 1.915165] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 1.915198] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 1.915234] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 1.915238] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 1.915269] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 1.915307] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 [ 1.915346] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables: [ 1.915349] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.915377] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 1.915416] [drm:intel_bios_init [i915]] DRRS State Enabled:1 [ 1.915447] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 1.915476] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 1.915506] [drm:intel_bios_init [i915]] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.915544] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 6 [ 1.915575] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 [ 1.915604] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 6 [ 1.915975] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 1.916015] [drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz [ 1.916100] [drm:intel_power_well_enable [i915]] enabling always-on [ 1.916137] [drm:intel_power_well_enable [i915]] enabling display [ 1.916151] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.917724] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 1.917762] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec) [ 1.917793] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 50 (25.0 usec) [ 1.917828] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 90 (45.0 usec) [ 1.917850] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 130 (65.0 usec) [ 1.917881] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec) [ 1.917913] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec) [ 1.917944] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 50 (25.0 usec) [ 1.917975] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 90 (45.0 usec) [ 1.918006] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 130 (65.0 usec) [ 1.918131] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec) [ 1.918161] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec) [ 1.918192] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 50 (25.0 usec) [ 1.918222] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 90 (45.0 usec) [ 1.918253] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 130 (65.0 usec) [ 1.918283] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec) [ 1.918324] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 1.918645] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz [ 1.918744] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 540000 kHz [ 1.918779] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 540000 kHz [ 1.919147] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 1.919210] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT) [ 1.919286] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C [ 1.919319] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT) [ 1.919387] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 1.919428] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT) [ 1.919629] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 1.919673] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled [ 1.919714] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x0 [ 1.919750] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled [ 1.919789] [drm:intel_set_plane_visible [i915]] pipe C active planes 0x0 [ 1.919825] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:46:pipe C] hw state readout: disabled [ 1.919858] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 1.919888] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 1.919919] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000000, on 0 [ 1.919949] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1 [ 1.919978] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000001, on 1 [ 1.920009] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1 [ 1.920232] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:47:DDI B] hw state readout: disabled, pipe A [ 1.920268] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:52:DDI C] hw state readout: enabled, pipe A [ 1.920298] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:DP-MST A] hw state readout: disabled, pipe A [ 1.920327] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DP-MST B] hw state readout: disabled, pipe B [ 1.920356] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:56:DP-MST C] hw state readout: disabled, pipe C [ 1.920408] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:48:HDMI-A-1] hw state readout: disabled [ 1.920441] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:DP-1] hw state readout: enabled [ 1.920474] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:57:HDMI-A-2] hw state readout: disabled [ 1.920600] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state] [ 1.920639] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 1.920675] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 1.920708] [drm:intel_dump_pipe_config [i915]] requested mode: [ 1.920713] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 109 270000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.920746] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 1.920750] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 109 270000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 1.920783] [drm:intel_dump_pipe_config [i915]] crtc timings: 270000 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5 [ 1.920814] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 270000 [ 1.920845] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled [ 1.920876] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 1.920911] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 1.920939] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 1.920964] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0 [ 1.920994] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0 [ 1.921024] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 1.921075] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state] [ 1.921095] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 1.921121] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 1.921150] [drm:intel_dump_pipe_config [i915]] requested mode: [ 1.921152] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.921181] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 1.921184] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.921213] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.921242] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.921271] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.921300] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 1.921330] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 1.921358] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 1.921387] [drm:intel_dump_pipe_config [i915]] [PLANE:33:primary B] disabled, scaler_id = 0 [ 1.921417] [drm:intel_dump_pipe_config [i915]] [PLANE:35:sprite B] disabled, scaler_id = 0 [ 1.921446] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = 0 [ 1.921476] [drm:intel_dump_pipe_config [i915]] [CRTC:46:pipe C][setup_hw_state] [ 1.921505] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 1.921534] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 1.921562] [drm:intel_dump_pipe_config [i915]] requested mode: [ 1.921565] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.921597] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 1.921600] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.921629] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.921658] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 1.921687] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.921715] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 1.921749] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 1.921788] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 1.921824] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary C] disabled, scaler_id = 0 [ 1.921858] [drm:intel_dump_pipe_config [i915]] [PLANE:42:sprite C] disabled, scaler_id = 0 [ 1.921890] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor C] disabled, scaler_id = 0 [ 1.921928] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling [ 1.921961] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling [ 1.922027] [drm:ironlake_get_initial_plane_config [i915]] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000 [ 1.922079] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000 [ 1.922145] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space [ 1.922189] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x0 [ 1.922739] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000] [ 1.924065] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 1.924184] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfffff000 [ 1.926902] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0 [ 1.926944] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 11 [ 1.926986] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0 [ 1.927026] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0 [ 1.927175] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs1 [ 1.927215] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0 [ 1.927361] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 1.927400] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 1.927436] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 1.927464] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 1.929175] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-1 [ 1.929765] [drm] Initialized i915 1.6.0 20170717 for 0000:00:02.0 on minor 0 [ 1.931264] [drm:intel_opregion_register [i915]] 3 outputs detected [ 1.942131] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.943851] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.944573] [drm] DRM_I915_DEBUG enabled [ 1.944576] [drm] DRM_I915_DEBUG_GEM enabled [ 1.944587] [drm:drm_setup_crtcs] [ 1.944614] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] [ 1.944669] [drm:intel_hdmi_detect [i915]] [CONNECTOR:48:HDMI-A-1] [ 1.945754] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.946077] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.946123] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.948104] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.948116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.950105] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.950146] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.952068] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.952077] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1.952082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] status updated from unknown to disconnected [ 1.952201] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] disconnected [ 1.952207] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] [ 1.952250] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-1] [ 1.953445] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 1.954392] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 1.954435] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 1.954475] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 1.954515] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 1.955512] [drm:drm_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 1.955553] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 1.965347] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] status updated from unknown to connected [ 1.965400] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.965441] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] probed modes : [ 1.965445] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.965447] [drm:drm_mode_debug_printmodeline] Modeline 63:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 1.965449] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.965451] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.965452] [drm:drm_mode_debug_printmodeline] Modeline 61:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.965454] [drm:drm_mode_debug_printmodeline] Modeline 69:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.965456] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.965458] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.965460] [drm:drm_mode_debug_printmodeline] Modeline 64:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.965461] [drm:drm_mode_debug_printmodeline] Modeline 65:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.965463] [drm:drm_mode_debug_printmodeline] Modeline 66:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.965465] [drm:drm_mode_debug_printmodeline] Modeline 67:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.965468] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 1.965505] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] [ 1.967088] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.967122] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.969107] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.969112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 1.971090] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.971124] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.973132] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 1.973138] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1.973141] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] status updated from unknown to disconnected [ 1.973143] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 1.973147] [drm:drm_setup_crtcs] connector 48 enabled? no [ 1.973149] [drm:drm_setup_crtcs] connector 53 enabled? yes [ 1.973151] [drm:drm_setup_crtcs] connector 57 enabled? no [ 1.973203] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 1.973211] [drm:drm_setup_crtcs] looking for cmdline mode on connector 53 [ 1.973213] [drm:drm_setup_crtcs] looking for preferred mode on connector 53 0 [ 1.973216] [drm:drm_setup_crtcs] found mode 1920x1080 [ 1.973218] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config [ 1.973227] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 32 (0,0) [ 1.973274] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 1.974092] [drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00040000 [ 1.974197] [drm:drm_fb_helper_hotplug_event.part.18] [ 1.974205] [drm:drm_setup_crtcs] [ 1.974222] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] [ 1.974270] [drm:intel_hdmi_detect [i915]] [CONNECTOR:48:HDMI-A-1] [ 1.974573] fbcon: inteldrmfb (fb0) is primary device [ 1.976095] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.976131] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.978087] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 1.978093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 1.980086] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.980118] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 1.982088] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 1.982092] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 1.982095] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] disconnected [ 1.982097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] [ 1.982131] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-1] [ 1.983210] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 1.984127] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 1.984155] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 1.984184] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 1.984212] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 1.985197] [drm:drm_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 1.985228] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 1.994890] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 1.994966] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] probed modes : [ 1.994969] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 1.994971] [drm:drm_mode_debug_printmodeline] Modeline 63:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 1.994973] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.994975] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 1.994976] [drm:drm_mode_debug_printmodeline] Modeline 61:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 1.994978] [drm:drm_mode_debug_printmodeline] Modeline 69:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 1.994980] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 1.994981] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 1.994983] [drm:drm_mode_debug_printmodeline] Modeline 64:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 1.994985] [drm:drm_mode_debug_printmodeline] Modeline 65:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 1.994986] [drm:drm_mode_debug_printmodeline] Modeline 66:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 1.994988] [drm:drm_mode_debug_printmodeline] Modeline 67:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 1.994990] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 1.995029] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] [ 1.997106] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.997141] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 1.999223] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 1.999227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.001304] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.001335] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.003409] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.003413] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 2.003415] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 2.003417] [drm:drm_setup_crtcs] connector 48 enabled? no [ 2.003419] [drm:drm_setup_crtcs] connector 53 enabled? yes [ 2.003420] [drm:drm_setup_crtcs] connector 57 enabled? no [ 2.003467] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 2.003473] [drm:drm_setup_crtcs] looking for cmdline mode on connector 53 [ 2.003475] [drm:drm_setup_crtcs] looking for preferred mode on connector 53 0 [ 2.003476] [drm:drm_setup_crtcs] found mode 1920x1080 [ 2.003478] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config [ 2.003488] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 32 (0,0) [ 2.003726] [drm:intel_atomic_check [i915]] [CONNECTOR:53:DP-1] checking for sink bpp constrains [ 2.003758] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 [ 2.003790] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz [ 2.003822] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24 [ 2.003853] [drm:intel_dp_compute_config [i915]] DP link bw required 445500 available 648000 [ 2.003885] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 2.003916] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset] [ 2.003947] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 2.003978] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64 [ 2.004008] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 2.004054] [drm:intel_dump_pipe_config [i915]] requested mode: [ 2.004056] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 2.004084] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 2.004086] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 2.004115] [drm:intel_dump_pipe_config [i915]] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5 [ 2.004144] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1080, pixel rate 148500 [ 2.004172] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 2.004201] [drm:intel_dump_pipe_config [i915]] ips: 1, double wide: 0 [ 2.004230] [drm:hsw_dump_hw_state [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0 [ 2.004259] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 2.004287] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0 [ 2.004316] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0 [ 2.004344] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0 [ 2.004375] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz [ 2.004407] [drm:intel_reference_shared_dpll [i915]] using LCPLL 810 for pipe A [ 2.004644] [drm:intel_disable_pipe [i915]] disabling pipe A [ 2.021561] [drm:intel_disable_shared_dpll [i915]] disable LCPLL 1350 (active 1, on? 1) for crtc 32 [ 2.021597] [drm:intel_disable_shared_dpll [i915]] disabling LCPLL 1350 [ 2.021635] [drm:intel_set_cdclk [i915]] Changing CDCLK to 337500 kHz, VCO 0 kHz, ref 0 kHz [ 2.021684] [drm:intel_update_cdclk [i915]] Current CD clock rate: 337500 kHz, VCO: 0 kHz, ref: 0 kHz [ 2.021716] [drm:intel_atomic_commit_tail [i915]] [ENCODER:47:DDI B] [ 2.021748] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DDI C] [ 2.021780] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:DP-MST A] [ 2.021811] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP-MST B] [ 2.021843] [drm:intel_atomic_commit_tail [i915]] [ENCODER:56:DP-MST C] [ 2.021874] [drm:verify_single_dpll_state.isra.70 [i915]] WRPLL 1 [ 2.021907] [drm:verify_single_dpll_state.isra.70 [i915]] WRPLL 2 [ 2.021939] [drm:verify_single_dpll_state.isra.70 [i915]] SPLL [ 2.021972] [drm:verify_single_dpll_state.isra.70 [i915]] LCPLL 810 [ 2.022003] [drm:verify_single_dpll_state.isra.70 [i915]] LCPLL 1350 [ 2.022048] [drm:verify_single_dpll_state.isra.70 [i915]] LCPLL 2700 [ 2.022080] [drm:intel_enable_shared_dpll [i915]] enable LCPLL 810 (active 1, on? 0) for crtc 32 [ 2.022112] [drm:intel_enable_shared_dpll [i915]] enabling LCPLL 810 [ 2.024135] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000 [ 2.024164] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 2.024193] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 2.024222] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 2.026870] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 2.026899] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 [ 2.029841] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 2.031933] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:53:DP-1] Link Training Passed at Link Rate = 162000, Lane count = 4 [ 2.032935] [drm:intel_enable_pipe [i915]] enabling pipe A [ 2.033005] [drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1 [ 2.033056] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 2.033518] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.049817] [drm:verify_connector_state.isra.69 [i915]] [CONNECTOR:53:DP-1] [ 2.049865] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A] [ 2.049919] [drm:verify_single_dpll_state.isra.70 [i915]] LCPLL 810 [ 2.066600] [drm:drm_fb_helper_hotplug_event.part.18] [ 2.066603] [drm:drm_setup_crtcs] [ 2.066622] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] [ 2.066678] [drm:intel_hdmi_detect [i915]] [CONNECTOR:48:HDMI-A-1] [ 2.068809] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.068858] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.070983] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.070989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.073137] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.073188] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.075303] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.075309] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 2.075313] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] disconnected [ 2.075317] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] [ 2.075372] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-1] [ 2.076483] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 2.077456] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 2.077507] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.077555] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.077604] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.078628] [drm:drm_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.078679] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 2.088673] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.088781] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] probed modes : [ 2.088785] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 2.088788] [drm:drm_mode_debug_printmodeline] Modeline 63:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 2.088790] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.088792] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.088795] [drm:drm_mode_debug_printmodeline] Modeline 61:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 2.088797] [drm:drm_mode_debug_printmodeline] Modeline 69:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 2.088800] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.088802] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 2.088805] [drm:drm_mode_debug_printmodeline] Modeline 64:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.088807] [drm:drm_mode_debug_printmodeline] Modeline 65:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 2.088809] [drm:drm_mode_debug_printmodeline] Modeline 66:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 2.088812] [drm:drm_mode_debug_printmodeline] Modeline 67:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 2.088815] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 2.088869] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] [ 2.090964] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.091001] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.093111] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.093115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 2.095213] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.095250] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.097346] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 2.097350] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 2.097353] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 2.097356] [drm:drm_setup_crtcs] connector 48 enabled? no [ 2.097357] [drm:drm_setup_crtcs] connector 53 enabled? yes [ 2.097359] [drm:drm_setup_crtcs] connector 57 enabled? no [ 2.097410] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 2.097417] [drm:drm_setup_crtcs] looking for cmdline mode on connector 53 [ 2.097419] [drm:drm_setup_crtcs] looking for preferred mode on connector 53 0 [ 2.097421] [drm:drm_setup_crtcs] found mode 1920x1080 [ 2.097423] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config [ 2.097432] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 32 (0,0) [ 2.114796] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:76:f8:df [ 2.114798] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.114850] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 2.117235] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.119611] Console: switching to colour frame buffer device 240x67 [ 2.137408] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.189497] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.272141] tsc: Refined TSC clocksource calibration: 3092.844 MHz [ 2.272149] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94dffea94, max_idle_ns: 440795361700 ns [ 2.303934] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.304295] systemd[1]: Detected architecture x86-64. [ 2.304585] systemd[1]: Set hostname to . [ 2.402489] systemd[1]: Listening on Journal Socket. [ 2.403161] systemd[1]: Created slice System Slice. [ 2.403239] systemd[1]: Listening on Syslog Socket. [ 2.404723] systemd[1]: Starting Set the console keyboard layout... [ 2.406390] systemd[1]: Mounting Debug File System... [ 2.408954] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.412332] systemd[1]: Starting Load Kernel Modules... [ 2.576211] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 2.596749] systemd-journald[251]: Received request to flush runtime journal from PID 1 [ 2.967020] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] [ 2.967075] [drm:intel_hdmi_detect [i915]] [CONNECTOR:48:HDMI-A-1] [ 2.969135] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.969231] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.971065] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 2.971080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb [ 2.973077] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.973108] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 2.975116] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 2.975128] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 2.975132] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:HDMI-A-1] disconnected [ 2.975177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] [ 2.975212] [drm:intel_dp_detect [i915]] [CONNECTOR:53:DP-1] [ 2.976662] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00 [ 2.977768] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no [ 2.977801] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000, 540000 [ 2.977831] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 2.977859] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 2.979036] [drm:drm_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 2.979070] [drm:intel_dp_detect [i915]] Sink is not MST capable [ 2.985771] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 2.987646] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 2.988837] [drm:drm_edid_to_eld] ELD: no CEA Extension found [ 2.989137] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:53:DP-1] probed modes : [ 2.989212] [drm:drm_mode_debug_printmodeline] Modeline 60:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 [ 2.989215] [drm:drm_mode_debug_printmodeline] Modeline 63:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 [ 2.989219] [drm:drm_mode_debug_printmodeline] Modeline 68:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.989222] [drm:drm_mode_debug_printmodeline] Modeline 62:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.989225] [drm:drm_mode_debug_printmodeline] Modeline 61:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 2.989228] [drm:drm_mode_debug_printmodeline] Modeline 69:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 2.989231] [drm:drm_mode_debug_printmodeline] Modeline 70:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.989234] [drm:drm_mode_debug_printmodeline] Modeline 71:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 2.989238] [drm:drm_mode_debug_printmodeline] Modeline 64:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.989241] [drm:drm_mode_debug_printmodeline] Modeline 65:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 2.989244] [drm:drm_mode_debug_printmodeline] Modeline 66:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 2.989247] [drm:drm_mode_debug_printmodeline] Modeline 67:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 2.990023] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 2.994101] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] [ 2.994144] [drm:intel_hdmi_detect [i915]] [CONNECTOR:57:HDMI-A-2] [ 2.996065] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.996094] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 2.998071] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 2.998079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc [ 3.000113] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.000144] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.002119] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.002128] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6) [ 3.002133] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-2] disconnected [ 3.002265] [drm:drm_mode_addfb2] [FB:72] [ 3.009140] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp [ 3.009143] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.009146] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.009148] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.009150] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.009153] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 3.019016] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 3.019266] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 3.019299] [drm:i915_audio_component_get_eld [i915]] Not valid for port B [ 3.019330] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 3.019358] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 3.019386] [drm:i915_audio_component_get_eld [i915]] Not valid for port C [ 3.019412] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 3.019439] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 3.019465] [drm:i915_audio_component_get_eld [i915]] Not valid for port D [ 3.022443] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4 [ 3.023076] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5 [ 3.023438] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 [ 3.023768] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7 [ 3.024135] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [ 3.062829] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 3.063549] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 3.203203] [drm:drm_mode_addfb2] [FB:72] [ 3.203267] [drm:drm_mode_setcrtc] [CRTC:32:pipe A] [ 3.203318] [drm:drm_mode_setcrtc] [CONNECTOR:53:DP-1] [ 3.218736] [drm:drm_mode_setcrtc] [CRTC:32:pipe A] [ 3.218771] [drm:drm_mode_setcrtc] [CONNECTOR:53:DP-1] [ 3.280704] clocksource: Switched to clocksource tsc [ 3.325260] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3.331361] Adding 8787964k swap on /dev/sda2. Priority:-1 extents:1 across:8787964k SSFS [ 3.745971] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on [ 4.094841] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 4.304733] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 7.187983] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 7.188121] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 12.417447] random: crng init done [ 262.647074] Console: switching to colour dummy device 80x25 [ 262.647171] [IGT] gem_reset_stats: executing [ 262.660537] Setting dangerous option reset - tainting kernel [ 262.660651] [IGT] gem_reset_stats: starting subtest reset-count-bsd1 [ 264.736751] [drm:missed_breadcrumb [i915]] vcs0 missed breadcrumb at intel_breadcrumbs_hangcheck+0x5c/0x80 [i915], irq posted? yes, current seqno=8, last=9 [ 279.715473] [drm] GPU HANG: ecode 8:2:0x3fffffff, in gem_reset_stats [1078], reason: No progress on vcs0, action: reset [ 279.715824] [drm:i915_reset_device [i915]] resetting chip [ 279.716096] i915 0000:00:02.0: Resetting chip after gpu hang [ 279.716908] [drm:i915_gem_reset_engine [i915]] context gem_reset_stats[1078]/0 marked guilty (score 10) banned? no [ 279.716934] [drm:i915_gem_reset_engine [i915]] resetting vcs0 to restart from tail of request 0x9 [ 279.717243] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on [ 279.717432] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0 [ 279.717466] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 11 [ 279.717503] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0 [ 279.717611] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0 [ 279.717642] [drm:gen8_init_common_ring [i915]] Restarting vcs0:0 from 0x9 [ 279.717678] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs1 [ 279.717712] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0 [ 279.926733] Setting dangerous option reset - tainting kernel [ 279.926834] [IGT] gem_reset_stats: exiting, ret=99 [ 279.957996] Console: switching to colour frame buffer device 240x67 [ 289.313567] Console: switching to colour dummy device 80x25 [ 289.313707] [IGT] gem_reset_stats: executing [ 289.330455] Setting dangerous option reset - tainting kernel [ 289.330584] [IGT] gem_reset_stats: starting subtest reset-count-bsd2 [ 291.744270] [drm:missed_breadcrumb [i915]] vcs1 missed breadcrumb at intel_breadcrumbs_hangcheck+0x5c/0x80 [i915], irq posted? yes, current seqno=15, last=16 [ 304.739654] [drm] GPU HANG: ecode 8:3:0x3fffffff, in gem_reset_stats [1088], reason: No progress on vcs1, action: reset [ 304.739797] [drm:i915_reset_device [i915]] resetting chip [ 304.739843] i915 0000:00:02.0: Resetting chip after gpu hang [ 304.739947] [drm:i915_gem_reset_engine [i915]] context gem_reset_stats[1088]/0 marked guilty (score 10) banned? no [ 304.739977] [drm:i915_gem_reset_engine [i915]] resetting vcs1 to restart from tail of request 0x16 [ 304.740117] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on [ 304.740224] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0 [ 304.740257] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 11 [ 304.740289] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0 [ 304.740320] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0 [ 304.740355] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs1 [ 304.740382] [drm:gen8_init_common_ring [i915]] Restarting vcs1:0 from 0x16 [ 304.740416] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0 [ 304.746569] Setting dangerous option reset - tainting kernel [ 304.746653] [IGT] gem_reset_stats: exiting, ret=99 [ 304.772792] Console: switching to colour frame buffer device 240x67