Linux version 2.6.24-rc1 (laforge@radha.de.gnumonks.org) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #2 SMP Sat Dec 22 01:02:02 CET 2007 Command line: pci=nommconf root=/dev/md0 vga=0xf01 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cdd76000 (usable) BIOS-e820: 00000000cdd76000 - 00000000cde44000 (ACPI NVS) BIOS-e820: 00000000cde44000 - 00000000ceeca000 (usable) BIOS-e820: 00000000ceeca000 - 00000000ceecc000 (reserved) BIOS-e820: 00000000ceecc000 - 00000000cef77000 (usable) BIOS-e820: 00000000cef77000 - 00000000cefce000 (ACPI NVS) BIOS-e820: 00000000cefce000 - 00000000cefde000 (usable) BIOS-e820: 00000000cefde000 - 00000000cefe5000 (ACPI NVS) BIOS-e820: 00000000cefe5000 - 00000000cefe7000 (usable) BIOS-e820: 00000000cefe7000 - 00000000ceff2000 (ACPI data) BIOS-e820: 00000000ceff2000 - 00000000ceff3000 (usable) BIOS-e820: 00000000ceff3000 - 00000000cefff000 (ACPI data) BIOS-e820: 00000000cefff000 - 00000000cf000000 (usable) BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000012c000000 (usable) Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 843126) 1 entries of 3200 used Entering add_active_range(0, 843332, 847562) 2 entries of 3200 used Entering add_active_range(0, 847564, 847735) 3 entries of 3200 used Entering add_active_range(0, 847822, 847838) 4 entries of 3200 used Entering add_active_range(0, 847845, 847847) 5 entries of 3200 used Entering add_active_range(0, 847858, 847859) 6 entries of 3200 used Entering add_active_range(0, 847871, 847872) 7 entries of 3200 used Entering add_active_range(0, 1048576, 1228800) 8 entries of 3200 used end_pfn_map = 1228800 DMI 2.4 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT CEFFD038, 006C (r1 INTEL DQ3510J 2DB 1000013) ACPI: FACP CEFFC000, 0074 (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: DSDT CEFF8000, 3C65 (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: FACS CEF83000, 0040 ACPI: APIC CEFF7000, 0078 (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: WDDT CEFF6000, 0040 (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: MCFG CEFF5000, 003C (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: ASF! CEFF4000, 00A6 (r32 INTEL DQ3510J 2DB MSFT 1000013) ACPI: HPET CEFF3000, 0038 (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: DMAR CEFF1000, 0128 (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: ASPT CEFF0000, 002C (r1 INTEL DQ3510J 2DB MSFT 1000013) ACPI: SSDT CEFEF000, 0204 (r1 INTEL CpuPm 2DB MSFT 1000013) ACPI: SSDT CEFEE000, 0175 (r1 INTEL Cpu0Ist 2DB MSFT 1000013) ACPI: SSDT CEFED000, 0175 (r1 INTEL Cpu1Ist 2DB MSFT 1000013) ACPI: SSDT CEFEC000, 0175 (r1 INTEL Cpu2Ist 2DB MSFT 1000013) ACPI: SSDT CEFEB000, 0175 (r1 INTEL Cpu3Ist 2DB MSFT 1000013) ACPI: SSDT CEFEA000, 00DD (r1 INTEL Cpu0Cst 2DB MSFT 1000013) ACPI: SSDT CEFE9000, 00DD (r1 INTEL Cpu1Cst 2DB MSFT 1000013) ACPI: SSDT CEFE8000, 00DD (r1 INTEL Cpu2Cst 2DB MSFT 1000013) ACPI: SSDT CEFE7000, 00DD (r1 INTEL Cpu3Cst 2DB MSFT 1000013) ACPI: TCPA CEF77000, 0032 (r2 INTEL TIANO 2 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000012c000000 Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 843126) 1 entries of 3200 used Entering add_active_range(0, 843332, 847562) 2 entries of 3200 used Entering add_active_range(0, 847564, 847735) 3 entries of 3200 used Entering add_active_range(0, 847822, 847838) 4 entries of 3200 used Entering add_active_range(0, 847845, 847847) 5 entries of 3200 used Entering add_active_range(0, 847858, 847859) 6 entries of 3200 used Entering add_active_range(0, 847871, 847872) 7 entries of 3200 used Entering add_active_range(0, 1048576, 1228800) 8 entries of 3200 used Bootmem setup node 0 0000000000000000-000000012c000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1228800 Movable zone start PFN for each node early_node_map[9] active PFN ranges 0: 0 -> 158 0: 256 -> 843126 0: 843332 -> 847562 0: 847564 -> 847735 0: 847822 -> 847838 0: 847845 -> 847847 0: 847858 -> 847859 0: 847871 -> 847872 0: 1048576 -> 1228800 On node 0 totalpages: 1027673 DMA zone: 88 pages used for memmap DMA zone: 1995 pages reserved DMA zone: 1915 pages, LIFO batch:0 DMA32 zone: 22440 pages used for memmap DMA32 zone: 821011 pages, LIFO batch:31 Normal zone: 3872 pages used for memmap Normal zone: 176352 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a301 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000cdd76000 - 00000000cde44000 swsusp: Registered nosave memory region: 00000000ceeca000 - 00000000ceecc000 swsusp: Registered nosave memory region: 00000000cef77000 - 00000000cefce000 swsusp: Registered nosave memory region: 00000000cefde000 - 00000000cefe5000 swsusp: Registered nosave memory region: 00000000cefe7000 - 00000000ceff2000 swsusp: Registered nosave memory region: 00000000ceff3000 - 00000000cefff000 swsusp: Registered nosave memory region: 00000000cf000000 - 00000000d0000000 swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f0000000 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f8000000 swsusp: Registered nosave memory region: 00000000f8000000 - 00000000ffc00000 swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at d2000000 (gap: d0000000:20000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 30560 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 999278 Policy zone: Normal Kernel command line: pci=nommconf root=/dev/md0 vga=0xf01 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) hpet clockevent registered TSC calibrated against HPET time.c: Detected 2393.999 MHz processor. Console: colour VGA+ 80x50 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| double unlock: ok | ok |failed| ok |failed|failed| initialize held:failed|failed|failed|failed|failed|failed| bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | |failed| recursive read-lock #2: | ok | |failed| mixed read-write-lock: |failed| |failed| mixed write-read-lock: |failed| |failed| -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12:failed|failed| ok | soft-irqs-on + irq-safe-A/12:failed|failed| ok | hard-irqs-on + irq-safe-A/21:failed|failed| ok | soft-irqs-on + irq-safe-A/21:failed|failed| ok | sirq-safe-A => hirqs-on/12:failed|failed| ok | sirq-safe-A => hirqs-on/21:failed|failed| ok | hard-safe-A + irqs-on/12:failed|failed| ok | soft-safe-A + irqs-on/12:failed|failed| ok | hard-safe-A + irqs-on/21:failed|failed| ok | soft-safe-A + irqs-on/21:failed|failed| ok | hard-safe-A + unsafe-B #1/123:failed|failed| ok | soft-safe-A + unsafe-B #1/123:failed|failed| ok | hard-safe-A + unsafe-B #1/132:failed|failed| ok | soft-safe-A + unsafe-B #1/132:failed|failed| ok | hard-safe-A + unsafe-B #1/213:failed|failed| ok | soft-safe-A + unsafe-B #1/213:failed|failed| ok | hard-safe-A + unsafe-B #1/231:failed|failed| ok | soft-safe-A + unsafe-B #1/231:failed|failed| ok | hard-safe-A + unsafe-B #1/312:failed|failed| ok | soft-safe-A + unsafe-B #1/312:failed|failed| ok | hard-safe-A + unsafe-B #1/321:failed|failed| ok | soft-safe-A + unsafe-B #1/321:failed|failed| ok | hard-safe-A + unsafe-B #2/123:failed|failed| ok | soft-safe-A + unsafe-B #2/123:failed|failed| ok | hard-safe-A + unsafe-B #2/132:failed|failed| ok | soft-safe-A + unsafe-B #2/132:failed|failed| ok | hard-safe-A + unsafe-B #2/213:failed|failed| ok | soft-safe-A + unsafe-B #2/213:failed|failed| ok | hard-safe-A + unsafe-B #2/231:failed|failed| ok | soft-safe-A + unsafe-B #2/231:failed|failed| ok | hard-safe-A + unsafe-B #2/312:failed|failed| ok | soft-safe-A + unsafe-B #2/312:failed|failed| ok | hard-safe-A + unsafe-B #2/321:failed|failed| ok | soft-safe-A + unsafe-B #2/321:failed|failed| ok | hard-irq lock-inversion/123:failed|failed| ok | soft-irq lock-inversion/123:failed|failed| ok | hard-irq lock-inversion/132:failed|failed| ok | soft-irq lock-inversion/132:failed|failed| ok | hard-irq lock-inversion/213:failed|failed| ok | soft-irq lock-inversion/213:failed|failed| ok | hard-irq lock-inversion/231:failed|failed| ok | soft-irq lock-inversion/231:failed|failed| ok | hard-irq lock-inversion/312:failed|failed| ok | soft-irq lock-inversion/312:failed|failed| ok | hard-irq lock-inversion/321:failed|failed| ok | soft-irq lock-inversion/321:failed|failed| ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | -------------------------------------------------------- 142 out of 218 testcases failed, as expected. | ---------------------------------------------------- Checking aperture... Memory: 3978948k/4915200k available (3765k kernel code, 131744k reserved, 1942k data, 364k init) Calibrating delay using timer specific routine.. 4791.38 BogoMIPS (lpj=9582761) Security Framework initialized Capability LSM initialized Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) lockdep: not fixing up alternatives. ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 610 Objects with 63 Devices 156 Methods 42 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 10 Objects with 0 Devices 4 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 5 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 5 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 5 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0007) - 1 Objects with 0 Devices 1 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0008) - 1 Objects with 0 Devices 1 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0009) - 1 Objects with 0 Devices 1 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 000A) - 1 Objects with 0 Devices 1 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. APIC timer calibration result 16624993 Detected 16.624 MHz APIC timer. lockdep: not fixing up alternatives. Booting processor 1/4 APIC 0x2 Initializing CPU#1 Calibrating delay using timer specific routine.. 4788.01 BogoMIPS (lpj=9576026) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. lockdep: not fixing up alternatives. Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 4508.81 BogoMIPS (lpj=9017626) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. lockdep: not fixing up alternatives. Booting processor 3/4 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 4787.99 BogoMIPS (lpj=9575998) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs CPU0 attaching sched-domain: domain 0: span f groups: 1 2 4 8 domain 1: span f groups: f CPU1 attaching sched-domain: domain 0: span f groups: 2 4 8 1 domain 1: span f groups: f CPU2 attaching sched-domain: domain 0: span f groups: 4 8 1 2 domain 1: span f groups: f CPU3 attaching sched-domain: domain 0: span f groups: 8 1 2 4 domain 1: span f groups: f khelper used greatest stack depth: 6544 bytes left net_namespace: 144 bytes xor: automatically using best checksumming function: generic_sse generic_sse: 8905.000 MB/sec xor: using function: generic_sse (8905.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered khelper used greatest stack depth: 6016 bytes left PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 5 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:............................................................................ Initialized 36/42 Regions 0/0 Fields 25/25 Buffers 15/35 Packages (653 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 69 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:Host address width 36 DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb00000 DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000 DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb02000 DMAR:Device scope device [0000:00:03.01] not found DMAR:Device scope device [0000:00:03.01] not found DMAR:Device scope device [0000:00:03.02] not found DMAR:Device scope device [0000:00:03.02] not found DMAR:Device scope device [0000:00:03.03] not found DMAR:Device scope device [0000:00:03.03] not found DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb03000 DMAR:RMRR base: 0x00000000000e0000 end: 0x00000000000effff DMAR:RMRR base: 0x00000000cf600000 end: 0x00000000cfffffff IOMMU: Setting identity map for device 0000:00:02.0 [0xcf600000 - 0xd0000000] IOMMU: Setting identity map for device 0000:00:02.1 [0xcf600000 - 0xd0000000] IOMMU: Setting identity map for device 0000:00:1d.0 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.1 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.2 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1d.7 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.0 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.1 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.2 [0xe0000 - 0xf0000] IOMMU: Setting identity map for device 0000:00:1a.7 [0xe0000 - 0xf0000] IOMMU: gfx device 0000:00:02.0 1-1 mapping IOMMU: Setting identity map for device 0000:00:02.0 [0x0 - 0x9e800] IOMMU: Setting identity map for device 0000:00:02.0 [0x100000 - 0xcdd76000] IOMMU: Setting identity map for device 0000:00:02.0 [0xcde44000 - 0xceeca000] IOMMU: Setting identity map for device 0000:00:02.0 [0xceecc000 - 0xcef77000] IOMMU: Setting identity map for device 0000:00:02.0 [0xcefce000 - 0xcefde000] IOMMU: Setting identity map for device 0000:00:02.0 [0xcefe5000 - 0xcefe7000] IOMMU: Setting identity map for device 0000:00:02.0 [0xceff2000 - 0xceff3000] IOMMU: Setting identity map for device 0000:00:02.0 [0xcefff000 - 0xcf000000] IOMMU: Setting identity map for device 0000:00:02.0 [0x100000000 - 0x12c000000] IOMMU: gfx device 0000:00:02.1 1-1 mapping IOMMU: Setting identity map for device 0000:00:02.1 [0x0 - 0x9e800] IOMMU: Setting identity map for device 0000:00:02.1 [0x100000 - 0xcdd76000] IOMMU: Setting identity map for device 0000:00:02.1 [0xcde44000 - 0xceeca000] IOMMU: Setting identity map for device 0000:00:02.1 [0xceecc000 - 0xcef77000] IOMMU: Setting identity map for device 0000:00:02.1 [0xcefce000 - 0xcefde000] IOMMU: Setting identity map for device 0000:00:02.1 [0xcefe5000 - 0xcefe7000] IOMMU: Setting identity map for device 0000:00:02.1 [0xceff2000 - 0xceff3000] IOMMU: Setting identity map for device 0000:00:02.1 [0xcefff000 - 0xcf000000] IOMMU: Setting identity map for device 0000:00:02.1 [0x100000000 - 0x12c000000] IOMMU: Prepare 0-16M unity mapping for LPC IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000] DMAR:[DMA Write] Request device [00:02.0] fault addr 900000000 DMAR:[fault reason 05] PTE Write access is not set PCI-DMA: Intel(R) Virtualization Technology for Directed I/O PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: 1000-1fff MEM window: e0100000-e01fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: e0000000-e00fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 13, 33554432 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 17632k freed Initializing RT-Tester: OK VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) async_tx: api initialized (async) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... Loading iSCSI transport class v2.0-724. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425100 irq 374 ata2: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425180 irq 374 ata3: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425200 irq 374 ata4: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425280 irq 374 ata5: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425300 irq 374 ata6: SATA max UDMA/133 abar m2048@0xe0425000 port 0xe0425380 irq 374 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: Optiarc DVD RW AD-7191S, 1.00, max UDMA/100 ata3.00: configured for UDMA/100 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb4 < sdb5 sdb6 > sd 1:0:0:0: [sdb] Attached SCSI disk scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7191S 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe0425c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0425800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 17, io base 0x000020a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 2-2: new high speed USB device using ehci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected sysfs: duplicate filename 'bInterfaceNumber' can not be created WARNING: at fs/sysfs/dir.c:424 sysfs_add_one() Call Trace: [] sysfs_add_one+0xae/0xe0 [] sysfs_add_file+0x63/0xa0 [] sysfs_create_group+0x6b/0x120 [] usb_create_sysfs_intf_files+0x39/0xf0 [] usb_set_configuration+0x387/0x5f0 [] usb_create_ep_files+0x1fc/0x330 [] generic_probe+0x7a/0xb0 [] usb_probe_device+0x3d/0x40 [] driver_probe_device+0xa1/0x1c0 [] __device_attach+0x0/0x10 [] __device_attach+0x9/0x10 [] bus_for_each_drv+0x5c/0x90 [] device_attach+0x8d/0xa0 [] bus_attach_device+0x56/0x90 [] device_add+0x498/0x5c0 [] usb_new_device+0x58/0xa0 [] hub_thread+0x36f/0xe20 [] autoremove_wake_function+0x0/0x40 [] hub_thread+0x0/0xe20 [] kthread+0x4d/0x80 [] child_rip+0xa/0x12 [] kthreadd+0xd2/0x150 [] kthread+0x0/0x80 [] child_rip+0x0/0x12 usb 2-3: new high speed USB device using ehci_hcd and address 3 usb 2-3: configuration #1 chosen from 1 choice hub 2-3:1.0: USB hub found hub 2-3:1.0: 4 ports detected usb 2-4: new high speed USB device using ehci_hcd and address 4 usb 2-4: configuration #1 chosen from 1 choice usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int64x1 2100 MB/s raid6: int64x2 2928 MB/s raid6: int64x4 2692 MB/s usb 3-1: new full speed USB device using uhci_hcd and address 2 raid6: int64x8 2137 MB/s raid6: sse2x1 3850 MB/s raid6: sse2x2 4485 MB/s usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 3 ports detected raid6: sse2x4 7207 MB/s raid6: using algorithm sse2x4 (7207 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com cpuidle: using governor ladder usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 4 ports detected usb 2-2.1: new low speed USB device using ehci_hcd and address 5 usb 2-2.1: configuration #1 chosen from 1 choice usb 2-2.2: new low speed USB device using ehci_hcd and address 6 usb 2-2.2: configuration #1 chosen from 1 choice usb 2-3.4: new high speed USB device using ehci_hcd and address 7 usb 2-3.4: configuration #1 chosen from 1 choice hub 2-3.4:1.0: USB hub found hub 2-3.4:1.0: 4 ports detected usb 3-1.1: new full speed USB device using uhci_hcd and address 3 usb 3-1.1: configuration #1 chosen from 1 choice usb 5-2.1: new full speed USB device using uhci_hcd and address 3 usb 5-2.1: configuration #1 chosen from 1 choice usb 5-2.2: new full speed USB device using uhci_hcd and address 4 usb 5-2.2: configuration #1 chosen from 1 choice usb 5-2.3: new full speed USB device using uhci_hcd and address 5 usb 5-2.3: configuration #1 chosen from 1 choice usb 5-2.4: new full speed USB device using uhci_hcd and address 6 usb 5-2.4: configuration #1 chosen from 1 choice usb 2-3.4.2: new full speed USB device using ehci_hcd and address 8 usb 2-3.4.2: configuration #1 chosen from 1 choice hub 2-3.4.2:1.0: USB hub found hub 2-3.4.2:1.0: 4 ports detected usb 2-3.4.2.1: new full speed USB device using ehci_hcd and address 9 usb 2-3.4.2.1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.1/2-2.1:1.0/input/input0 input: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-0000:00:1d.7-2.1 input: Darfon USB Combo Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.1/2-2.1:1.1/input/input1 input: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-0000:00:1d.7-2.1 input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.2/2-2.2:1.0/input/input2 input: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.7-2.2 input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3 input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.0-1.1 input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input4 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.0-1.1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered RPC: Registered udp transport module. RPC: Registered tcp transport module. registered taskstats version 1 Freeing unused kernel memory: 364k freed Write protecting the kernel read-only data: 1532k busybox used greatest stack depth: 5880 bytes left exe used greatest stack depth: 5560 bytes left NET: Registered protocol family 1 exe used greatest stack depth: 5544 bytes left Monitor-Mwait will be used to enter C-1 state ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) modprobe used greatest stack depth: 5256 bytes left udevd used greatest stack depth: 4920 bytes left sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sr 2:0:0:0: Attached scsi generic sg2 type 5 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:03:00.0 to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18 ata8: DUMMY BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[e0000000-e00007ff] Max Packet=[2048] IR/IT contexts=[8/8] md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. stty used greatest stack depth: 4904 bytes left sed used greatest stack depth: 3776 bytes left ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001d00a23] udevd used greatest stack depth: 3160 bytes left Real Time Clock Driver v1.12ac input: PC Speaker as /devices/platform/pcspkr/input/input5 agpgart: Detected an Intel Q35 Chipset. agpgart: Detected 6140K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 input: Power Button (FF) as /devices/virtual/input/input6 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/virtual/input/input7 ACPI: Sleep Button (CM) [SLPB] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:9b:ab:6e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18 usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 pl2303 5-2.1:1.0: pl2303 converter detected usb 5-2.1: pl2303 converter now attached to ttyUSB0 pl2303 5-2.2:1.0: pl2303 converter detected usb 5-2.2: pl2303 converter now attached to ttyUSB1 pl2303 5-2.3:1.0: pl2303 converter detected usb 5-2.3: pl2303 converter now attached to ttyUSB2 pl2303 5-2.4:1.0: pl2303 converter detected usb 5-2.4: pl2303 converter now attached to ttyUSB3 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA sound/pci/hda/hda_intel.c:727: codec_mask = 0x4 hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:2752: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2756: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2760: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2768: inputs: mic=0x18, fmic=0x1a, line=0x19, fline=0x0, cd=0x0, aux=0x0 Adding 15631204k swap on /dev/sda5. Priority:-1 extents:1 across:15631204k EXT3 FS on md0, internal journal coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong! kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 17 0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp: driver loaded but no devices found ppdev: user-space parallel port driver usb 3-1: USB disconnect, address 2 usb 3-1.1: USB disconnect, address 3