[ 0.000000] Linux version 4.14.0sims1-g06718a287f28-dirty (tkazimierczak@stretch64poligon) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #2 SMP Wed Nov 15 17:09:29 CET 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28-dirty root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro quiet loglevel=3 panic=5 systemd.show_status=1 intel_idle.max_cstate=1 drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e drm_kms_helper.edid_firmware=HDMI-A-1:edid/sims19in.bin [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000793b5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000793b6000-0x00000000793e5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000793e6000-0x00000000793f5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000793f6000-0x00000000798ddfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000798de000-0x0000000079b63fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079b64000-0x0000000079baefff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000079baf000-0x0000000079baffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079bb0000-0x0000000079bf1fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079bf2000-0x0000000079d62fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079d63000-0x0000000079ff9fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0x793ed000 ACPI 2.0=0x793ed000 ESRT=0x79b60018 SMBIOS=0xf0560 MPS=0xfd5f0 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: AAEON GENE-BT05/GENE-BT05, BIOS V012NM10 07/20/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07A800000 mask FFF800000 uncachable [ 0.000000] 2 base 07B000000 mask FFF000000 uncachable [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffffffffff240810] [ 0.000000] esrt: Reserving ESRT space from 0x0000000079b60018 to 0x0000000079b60050. [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE [ 0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE [ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE [ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE [ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE [ 0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x371b5000-0x378d1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000793ED000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000793ED080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000793F4F30 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170728/tbfadt-603) [ 0.000000] ACPI: DSDT 0x00000000793ED188 007DA5 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000798DDF80 000040 [ 0.000000] ACPI: APIC 0x00000000793F5040 000068 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000793F50A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: LPIT 0x00000000793F50F0 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D) [ 0.000000] ACPI: MCFG 0x00000000793F51F8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000793F5238 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000793F5270 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000793F59D8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000793F5C68 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000793F5DE8 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: CSRT 0x00000000793F5E30 00014C (v00 INTEL EDK2 00000005 INTL 20120624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000003efff] [ 0.000000] node 0: [mem 0x0000000000040000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.000000] node 0: [mem 0x000000001f100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020100000-0x00000000793b5fff] [ 0.000000] node 0: [mem 0x0000000079baf000-0x0000000079baffff] [ 0.000000] node 0: [mem 0x0000000079bf2000-0x0000000079d62fff] [ 0.000000] node 0: [mem 0x0000000079ffa000-0x0000000079ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff] [ 0.000000] On node 0 totalpages: 496332 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7744 pages used for memmap [ 0.000000] DMA32 zone: 492334 pages, LIFO batch:31 [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x793b6000-0x793e5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x793e6000-0x793f5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x793f6000-0x798ddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x798de000-0x79b63fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79b64000-0x79baefff] [ 0.000000] PM: Registered nosave memory: [mem 0x79bb0000-0x79bf1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79d63000-0x79ff9fff] [ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff880076400000 s107032 r8192 d32232 u1048576 [ 0.000000] pcpu-alloc: s107032 r8192 d32232 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 488498 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28-dirty root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro quiet loglevel=3 panic=5 systemd.show_status=1 intel_idle.max_cstate=1 drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e drm_kms_helper.edid_firmware=HDMI-A-1:edid/sims19in.bin [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1886448K/1985328K available (5390K kernel code, 919K rwdata, 1864K rodata, 1152K init, 452K bss, 98880K reserved, 0K cma-reserved) [ 0.000000] ftrace: allocating 23818 entries in 94 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 4352, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.004000] tsc: Detected 1333.000 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.00 BogoMIPS (lpj=5332000) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170728 [ 0.019911] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.021106] Security Framework initialized [ 0.021150] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.021164] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.021605] CPU: Physical Processor ID: 0 [ 0.021608] CPU: Processor Core ID: 0 [ 0.021613] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.021615] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.021630] mce: CPU supports 6 MCE banks [ 0.021640] CPU0: Thermal monitoring enabled (TM1) [ 0.021645] process: using mwait in idle threads [ 0.021651] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.021653] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.021898] Freeing SMP alternatives memory: 24K [ 0.026533] smpboot: Max logical packages: 1 [ 0.027285] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.066999] TSC deadline timer enabled [ 0.067004] smpboot: CPU0: Intel(R) Atom(TM) CPU E3825 @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x9) [ 0.067247] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.067277] ... version: 3 [ 0.067279] ... bit width: 40 [ 0.067280] ... generic registers: 2 [ 0.067282] ... value mask: 000000ffffffffff [ 0.067284] ... max period: 0000007fffffffff [ 0.067286] ... fixed-purpose events: 3 [ 0.067287] ... event mask: 0000000700000003 [ 0.067397] Hierarchical SRCU implementation. [ 0.068000] smp: Bringing up secondary CPUs ... [ 0.068000] x86: Booting SMP configuration: [ 0.068000] .... node #0, CPUs: #1 [ 0.068000] smp: Brought up 1 node, 2 CPUs [ 0.068000] smpboot: Total of 2 processors activated (5332.00 BogoMIPS) [ 0.068000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.068000] devtmpfs: initialized [ 0.068000] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes) [ 0.068000] PM: Registering ACPI NVS region [mem 0x793f6000-0x798ddfff] (5144576 bytes) [ 0.068000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.068000] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.068000] pinctrl core: initialized pinctrl subsystem [ 0.068233] NET: Registered protocol family 16 [ 0.068721] cpuidle: using governor ladder [ 0.068735] cpuidle: using governor menu [ 0.068860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.068863] ACPI: bus type PCI registered [ 0.069006] PCI: Using configuration type 1 for base access [ 0.069690] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.069690] ACPI: Added _OSI(Module Device) [ 0.069690] ACPI: Added _OSI(Processor Device) [ 0.069690] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.069690] ACPI: Added _OSI(Processor Aggregator Device) [ 0.084306] ACPI: Dynamic OEM Table Load: [ 0.084323] ACPI: SSDT 0xFFFF880076341C00 0002F6 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.084950] ACPI: Dynamic OEM Table Load: [ 0.084963] ACPI: SSDT 0xFFFF8800761F5800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.086359] ACPI: Dynamic OEM Table Load: [ 0.086371] ACPI: SSDT 0xFFFF880076101E00 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.086944] ACPI: Dynamic OEM Table Load: [ 0.086956] ACPI: SSDT 0xFFFF880076352900 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.089200] ACPI: Interpreter enabled [ 0.089258] ACPI: (supports S0 S3 S4 S5) [ 0.089262] ACPI: Using IOAPIC for interrupt routing [ 0.089356] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.090397] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.526937] ACPI: Power Resource [USBC] (on) [ 0.530411] ACPI: Power Resource [PLPE] (on) [ 0.531118] ACPI: Power Resource [PLPE] (on) [ 0.533831] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.533843] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.534484] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.535236] PCI host bridge to bus 0000:00 [ 0.535243] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.535248] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.535252] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.535256] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.535260] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.535264] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.535268] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.535272] pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0822ffe window] [ 0.535277] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.535294] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.535601] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.535622] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff] [ 0.535638] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.535652] pci 0000:00:02.0: reg 0x20: [io 0xe080-0xe087] [ 0.535680] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.535962] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501 [ 0.535990] pci 0000:00:12.0: reg 0x10: [mem 0xd0822000-0xd0822fff] [ 0.536000] pci 0000:00:12.0: reg 0x14: [mem 0xd0821000-0xd0821fff] [ 0.536092] pci 0000:00:12.0: PME# supported from D0 D3hot [ 0.536349] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.536377] pci 0000:00:13.0: reg 0x10: [io 0xe070-0xe077] [ 0.536390] pci 0000:00:13.0: reg 0x14: [io 0xe060-0xe063] [ 0.536402] pci 0000:00:13.0: reg 0x18: [io 0xe050-0xe057] [ 0.536413] pci 0000:00:13.0: reg 0x1c: [io 0xe040-0xe043] [ 0.536425] pci 0000:00:13.0: reg 0x20: [io 0xe020-0xe03f] [ 0.536438] pci 0000:00:13.0: reg 0x24: [mem 0xd0820000-0xd08207ff] [ 0.536497] pci 0000:00:13.0: PME# supported from D3hot [ 0.536752] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.536780] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit] [ 0.536858] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.537122] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.537158] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff] [ 0.537174] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff] [ 0.537293] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.537594] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.537627] pci 0000:00:1b.0: reg 0x10: [mem 0xd0814000-0xd0817fff 64bit] [ 0.537716] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.537972] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.538054] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.538315] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.538397] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.538659] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.538741] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.539001] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.539083] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.539352] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.539695] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.539744] pci 0000:00:1f.3: reg 0x10: [mem 0xd081c000-0xd081c01f] [ 0.539822] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f] [ 0.540297] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.540340] pci 0000:01:00.0: reg 0x10: [mem 0xd0700000-0xd071ffff] [ 0.540381] pci 0000:01:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.540399] pci 0000:01:00.0: reg 0x1c: [mem 0xd0720000-0xd0723fff] [ 0.540547] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.552044] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.552051] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.552057] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff] [ 0.552203] pci 0000:02:00.0: [8086:1539] type 00 class 0x020000 [ 0.552246] pci 0000:02:00.0: reg 0x10: [mem 0xd0600000-0xd061ffff] [ 0.552288] pci 0000:02:00.0: reg 0x18: [io 0xc000-0xc01f] [ 0.552306] pci 0000:02:00.0: reg 0x1c: [mem 0xd0620000-0xd0623fff] [ 0.552455] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.564039] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.564047] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.564053] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff] [ 0.564158] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.564260] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.564294] pci_bus 0000:00: on NUMA node 0 [ 0.772776] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.772993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.773203] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.773413] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.773625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.773837] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.774048] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.774263] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.775155] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.775155] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.775155] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.775155] vgaarb: loaded [ 0.775155] Registered efivars operations [ 0.788742] PCI: Using ACPI for IRQ routing [ 0.788746] PCI: pci_cache_line_size set to 64 bytes [ 0.788767] pci 0000:00:12.0: can't claim BAR 0 [mem 0xd0822000-0xd0822fff]: no compatible bridge window [ 0.788867] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 0.788871] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.788874] e820: reserve RAM buffer [mem 0x793b6000-0x7bffffff] [ 0.788877] e820: reserve RAM buffer [mem 0x79bb0000-0x7bffffff] [ 0.788881] e820: reserve RAM buffer [mem 0x79d63000-0x7bffffff] [ 0.788884] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.789187] clocksource: Switched to clocksource refined-jiffies [ 0.813546] pnp: PnP ACPI init [ 0.813678] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.814033] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.814039] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.814044] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.814049] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.814064] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.814563] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.814569] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.814574] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.814588] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.814704] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.814858] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.815747] pnp 00:05: [dma 3] [ 0.816076] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.816711] pnp 00:06: [dma 0 disabled] [ 0.816848] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.817483] pnp 00:07: [dma 0 disabled] [ 0.817609] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.818222] pnp 00:08: [dma 0 disabled] [ 0.818351] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.818964] pnp 00:09: [dma 0 disabled] [ 0.819088] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.024687] system 00:0a: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.024694] system 00:0a: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.024699] system 00:0a: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.024704] system 00:0a: [mem 0xfed04000-0xfed04fff] has been reserved [ 1.024709] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved [ 1.024716] system 00:0a: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.024722] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.024727] system 00:0a: [mem 0xfef00000-0xfeffffff] has been reserved [ 1.024742] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.025362] pnp: PnP ACPI: found 11 devices [ 1.034319] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.034349] clocksource: Switched to clocksource acpi_pm [ 1.034401] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 1.034416] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 1.034428] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 1.034434] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 1.034439] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 1.034450] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1.034456] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 1.034462] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 1.034498] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 1.034512] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 1.034519] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80400000-0x805fffff] [ 1.034531] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref] [ 1.034538] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80800000-0x809fffff] [ 1.034551] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref] [ 1.034558] pci 0000:00:12.0: BAR 0: assigned [mem 0x80c00000-0x80c00fff] [ 1.034570] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff] [ 1.034576] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff] [ 1.034586] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.034592] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.034599] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff] [ 1.034605] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 1.034613] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.034617] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.034624] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff] [ 1.034630] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 1.034637] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.034642] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 1.034649] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x805fffff] [ 1.034654] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff 64bit pref] [ 1.034661] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.034666] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.034673] pci 0000:00:1c.3: bridge window [mem 0x80800000-0x809fffff] [ 1.034678] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80bfffff 64bit pref] [ 1.034687] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.034691] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.034695] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.034699] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.034703] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.034707] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.034711] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 1.034715] pci_bus 0000:00: resource 11 [mem 0x80000000-0xd0822ffe window] [ 1.034719] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.034723] pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff] [ 1.034727] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 1.034731] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.034734] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.034738] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 1.034742] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 1.034746] pci_bus 0000:03: resource 1 [mem 0x80400000-0x805fffff] [ 1.034749] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref] [ 1.034754] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 1.034757] pci_bus 0000:04: resource 1 [mem 0x80800000-0x809fffff] [ 1.034761] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref] [ 1.035058] NET: Registered protocol family 2 [ 1.035398] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.035470] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.035586] TCP: Hash tables configured (established 16384 bind 16384) [ 1.035678] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.035706] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.035863] NET: Registered protocol family 1 [ 1.035900] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.035900] PCI: CLS 64 bytes, default 64 [ 1.035900] Unpacking initramfs... [ 1.328591] Freeing initrd memory: 7284K [ 1.328795] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1336e3dbd1a, max_idle_ns: 440795236868 ns [ 1.328842] clocksource: Switched to clocksource tsc [ 1.329529] audit: initializing netlink subsys (disabled) [ 1.329646] audit: type=2000 audit(1511886600.328:1): state=initialized audit_enabled=0 res=1 [ 1.330151] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 1.331534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.331610] io scheduler noop registered [ 1.331612] io scheduler deadline registered [ 1.331647] io scheduler cfq registered (default) [ 1.331650] io scheduler mq-deadline registered [ 1.331652] io scheduler kyber registered [ 1.332895] intel_idle: MWAIT substates: 0x3000020 [ 1.332898] intel_idle: v0.4.1 model 0x37 [ 1.332908] intel_idle: max_cstate 1 reached [ 1.333029] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.336778] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.357695] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.378627] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.399540] 00:08: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A [ 1.420470] 00:09: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A [ 1.420922] hpet: number irqs doesn't agree with number of timers [ 1.421376] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.421816] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.421830] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.422036] rtc_cmos 00:00: RTC can wake from S4 [ 1.422220] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.422252] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 1.422293] IR NEC protocol handler initialized [ 1.422295] IR RC5(x/sz) protocol handler initialized [ 1.422296] IR RC6 protocol handler initialized [ 1.422298] IR JVC protocol handler initialized [ 1.422299] IR Sony protocol handler initialized [ 1.422301] IR SANYO protocol handler initialized [ 1.422302] IR Sharp protocol handler initialized [ 1.422304] IR MCE Keyboard/mouse protocol handler initialized [ 1.422305] IR XMP protocol handler initialized [ 1.422313] intel_pstate: Intel P-state driver initializing [ 1.424515] NET: Registered protocol family 10 [ 1.425579] Segment Routing with IPv6 [ 1.425658] mip6: Mobile IPv6 [ 1.425670] NET: Registered protocol family 17 [ 1.426468] microcode: sig=0x30679, pf=0x1, revision=0x903 [ 1.426689] microcode: Microcode Update Driver: v2.2. [ 1.426740] sched_clock: Marking stable (1425958192, 0)->(1428214659, -2256467) [ 1.427645] registered taskstats version 1 [ 1.429002] rtc_cmos 00:00: setting system clock to 2017-11-28 16:30:01 UTC (1511886601) [ 1.444074] Freeing unused kernel memory: 1152K [ 1.444078] Write protecting the kernel read-only data: 8192k [ 1.444765] Freeing unused kernel memory: 740K [ 1.446169] Freeing unused kernel memory: 184K [ 1.619124] SCSI subsystem initialized [ 1.621677] libata version 3.00 loaded. [ 1.623481] ahci 0000:00:13.0: version 3.0 [ 1.623733] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 1.628292] pps_core: LinuxPPS API ver. 1 registered [ 1.628296] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.628919] PTP clock support registered [ 1.629406] dca service started, version 1.12.1 [ 1.634195] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode [ 1.634202] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso [ 1.641419] scsi host0: ahci [ 1.646536] ACPI: bus type USB registered [ 1.646601] usbcore: registered new interface driver usbfs [ 1.646633] usbcore: registered new interface driver hub [ 1.648208] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.648211] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.650118] scsi host1: ahci [ 1.650303] ata1: DUMMY [ 1.650308] ata2: SATA max UDMA/133 abar m2048@0xd0820000 port 0xd0820180 irq 87 [ 1.650318] usbcore: registered new device driver usb [ 1.650864] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.864644] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.864683] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.865909] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.865927] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.866398] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.866410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.866419] usb usb1: Product: xHCI Host Controller [ 1.866427] usb usb1: Manufacturer: Linux 4.14.0sims1-g06718a287f28-dirty xhci-hcd [ 1.866435] usb usb1: SerialNumber: 0000:00:14.0 [ 1.867189] hub 1-0:1.0: USB hub found [ 1.867249] hub 1-0:1.0: 6 ports detected [ 1.870036] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.870063] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.870606] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.870618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.870627] usb usb2: Product: xHCI Host Controller [ 1.870635] usb usb2: Manufacturer: Linux 4.14.0sims1-g06718a287f28-dirty xhci-hcd [ 1.870643] usb usb2: SerialNumber: 0000:00:14.0 [ 1.871442] hub 2-0:1.0: USB hub found [ 1.871505] hub 2-0:1.0: 1 port detected [ 1.887526] pps pps0: new PPS source ptp0 [ 1.887536] igb 0000:01:00.0: added PHC on eth0 [ 1.887540] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.887547] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:20 [ 1.887553] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.887559] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 1.967322] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.967561] ata2.00: ATA-10: 8GB SATA Flash Drive, SFPS918A, max UDMA/133 [ 1.967572] ata2.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.968000] ata2.00: configured for UDMA/133 [ 1.968612] scsi 1:0:0:0: Direct-Access ATA 8GB SATA Flash D 918A PQ: 0 ANSI: 5 [ 1.974836] sd 1:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.974877] sd 1:0:0:0: [sda] Write Protect is off [ 1.974882] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.974950] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.977191] sda: sda1 sda2 sda3 [ 1.978216] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.128693] pps pps1: new PPS source ptp1 [ 2.128709] igb 0000:02:00.0: added PHC on eth1 [ 2.128717] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.128728] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:21 [ 2.128738] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF [ 2.128748] igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.132200] igb 0000:02:00.0 enp2s0: renamed from eth1 [ 2.149018] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 2.204063] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 2.260131] raid6: sse2x1 gen() 416 MB/s [ 2.328013] raid6: sse2x1 xor() 1348 MB/s [ 2.352258] usb 1-4: New USB device found, idVendor=0424, idProduct=2514 [ 2.352270] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.353168] hub 1-4:1.0: USB hub found [ 2.353249] hub 1-4:1.0: 4 ports detected [ 2.396082] raid6: sse2x2 gen() 742 MB/s [ 2.464022] raid6: sse2x2 xor() 1602 MB/s [ 2.532027] raid6: sse2x4 gen() 1338 MB/s [ 2.600027] raid6: sse2x4 xor() 1619 MB/s [ 2.600030] raid6: using algorithm sse2x4 gen() 1338 MB/s [ 2.600032] raid6: .... xor() 1619 MB/s, rmw enabled [ 2.600035] raid6: using ssse3x2 recovery algorithm [ 2.607623] xor: measuring software checksum speed [ 2.640072] usb 1-4.2: new high-speed USB device number 3 using xhci_hcd [ 2.644012] prefetch64-sse: 4173.000 MB/sec [ 2.684009] generic_sse: 3785.000 MB/sec [ 2.684012] xor: using function: prefetch64-sse (4173.000 MB/sec) [ 2.698840] Btrfs loaded, crc32c=crc32c-intel [ 2.740372] usb 1-4.2: New USB device found, idVendor=1a40, idProduct=0201 [ 2.740386] usb 1-4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.740395] usb 1-4.2: Product: USB 2.0 Hub [MTT] [ 2.741303] hub 1-4.2:1.0: USB hub found [ 2.741383] hub 1-4.2:1.0: 7 ports detected [ 2.814369] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem [ 2.816872] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.820084] usb 1-4.4: new full-speed USB device number 4 using xhci_hcd [ 2.921889] usb 1-4.4: New USB device found, idVendor=14e1, idProduct=6000 [ 2.921903] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.921912] usb 1-4.4: Product: PenMount USB [ 2.921920] usb 1-4.4: Manufacturer: DIALOGUE INC [ 2.991459] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.032052] usb 1-4.2.3: new low-speed USB device number 5 using xhci_hcd [ 3.046925] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.047300] systemd[1]: Detected architecture x86-64. [ 3.049699] systemd[1]: Set hostname to . [ 3.137566] usb 1-4.2.3: New USB device found, idVendor=046d, idProduct=c31c [ 3.137580] usb 1-4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.137589] usb 1-4.2.3: Product: USB Keyboard [ 3.137597] usb 1-4.2.3: Manufacturer: Logitech [ 3.194725] systemd[1]: Listening on udev Kernel Socket. [ 3.196774] systemd[1]: Created slice User and Session Slice. [ 3.197426] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.197635] systemd[1]: Reached target Remote File Systems. [ 3.197893] systemd[1]: Listening on udev Control Socket. [ 3.198185] systemd[1]: Listening on Journal Socket. [ 3.198562] systemd[1]: Listening on Journal Audit Socket. [ 3.220082] usb 1-4.2.4: new full-speed USB device number 6 using xhci_hcd [ 3.269818] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 3.277530] f71882fg: Found f81866a chip at 0xa20, revision 32 [ 3.277744] f71882fg f71882fg.2592: Fan: 1 is in duty-cycle mode [ 3.277785] f71882fg f71882fg.2592: Fan: 2 is in duty-cycle mode [ 3.277821] f71882fg f71882fg.2592: Fan: 3 is in duty-cycle mode [ 3.277846] f71882fg f71882fg.2592: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.322618] usb 1-4.2.4: New USB device found, idVendor=096e, idProduct=0807 [ 3.322624] usb 1-4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.322628] usb 1-4.2.4: Product: USB Token [ 3.322631] usb 1-4.2.4: Manufacturer: FS [ 3.391269] loop: module loaded [ 3.417285] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.550868] systemd-journald[146]: Received request to flush runtime journal from PID 1 [ 3.591905] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.708620] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.709506] ACPI: Power Button [PWRB] [ 3.709688] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.709717] ACPI: Sleep Button [SLPB] [ 3.709891] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.710311] ACPI: Power Button [PWRF] [ 3.790333] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.841222] EFI Variables Facility v0.08 2004-May-17 [ 3.846417] hidraw: raw HID events driver (C) Jiri Kosina [ 3.870364] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 3.873601] [drm] drm_kms_firmware.edid_firmware is deprecated, please use drm.edid_firmware intead. [ 3.896688] usbcore: registered new interface driver usbhid [ 3.896691] usbhid: USB HID core driver [ 3.933618] [drm:i915_driver_load [i915]] No PCH found. [ 3.933698] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 3.933927] [drm:intel_device_info_dump [i915]] i915 device info: platform=VALLEYVIEW gen=7 pciid=0x0f31 rev=0x11 [ 3.934003] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no [ 3.934076] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: yes [ 3.934149] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no [ 3.934235] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no [ 3.934314] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes [ 3.934388] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no [ 3.934466] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: no [ 3.934539] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: no [ 3.934612] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: no [ 3.934685] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: no [ 3.934762] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: no [ 3.934834] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes [ 3.934907] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no [ 3.934984] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: yes [ 3.935056] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no [ 3.935129] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no [ 3.935205] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes [ 3.935277] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no [ 3.935351] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no [ 3.935426] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no [ 3.935499] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_preemption: no [ 3.935572] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no [ 3.935648] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no [ 3.935720] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes [ 3.935793] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes [ 3.935869] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no [ 3.935942] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: no [ 3.936015] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes [ 3.936116] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: yes [ 3.936189] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no [ 3.936262] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no [ 3.936336] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no [ 3.936412] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no [ 3.936484] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no [ 3.936558] [drm:intel_device_info_dump [i915]] i915 device info: has_ipc: no [ 3.936694] [drm:check_for_unclaimed_mmio [i915]] GTFIFODBG = 0x0810 [ 3.936993] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000 [ 3.937067] [drm:intel_device_info_runtime_init [i915]] slice total: 0 [ 3.937143] [drm:intel_device_info_runtime_init [i915]] subslice total: 0 [ 3.937216] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000 [ 3.937290] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0 [ 3.937363] [drm:intel_device_info_runtime_init [i915]] EU total: 0 [ 3.937435] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0 [ 3.937508] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n [ 3.937590] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n [ 3.937667] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n [ 3.937760] [drm:intel_device_info_runtime_init [i915]] CS timestamp frequency: 12500 kHz [ 3.937842] [drm:i915_driver_load [i915]] ppgtt mode: 1 [ 3.937914] [drm:i915_driver_load [i915]] use GPU semaphores? yes [ 3.937946] [drm] Memory usable by graphics device = 2048M [ 3.938032] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 3.938108] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M [ 3.938121] [drm] Replacing VGA console driver [ 3.938252] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 65536K [ 3.938350] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7987e018 [ 3.938451] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 3.938531] [drm:intel_opregion_setup [i915]] ASLE supported [ 3.938616] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 3.938722] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.938725] [drm] Driver supports precise vblank timestamp query. [ 3.938817] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz [ 3.938900] [drm:intel_bios_init [i915]] VBT signature "$VBT VALLEYVIEW ", BDB version 155 [ 3.938987] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 3.939069] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 3.939152] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19) [ 3.939237] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 3.939318] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 3.939404] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 3.939429] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 3.939511] [drm:intel_bios_init [i915]] VBT initial LVDS value 42000300 [ 3.939595] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 0, controller 0 [ 3.939691] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 3.939774] [drm:intel_bios_init [i915]] No PSR BDB found. [ 3.939856] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 3.939966] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 3.940066] [drm:intel_update_rawclk [i915]] rawclk rate: 200000 kHz [ 3.940212] [drm:intel_power_well_enable [i915]] enabling always-on [ 3.940287] [drm:intel_power_well_enable [i915]] enabling display [ 3.940372] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01 [ 3.940448] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23 [ 3.940525] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01 [ 3.940605] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23 [ 3.940681] [drm:intel_power_well_enable [i915]] enabling dpio-common [ 3.941231] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 3.941316] [drm:intel_modeset_init [i915]] 2 display pipes available. [ 3.941494] [drm:intel_modeset_init [i915]] CZ clock rate: 266667 kHz [ 3.941587] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 320000 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 2 [ 3.941673] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz [ 3.941756] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 360000 kHz [ 3.941766] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.942173] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40018 [ 3.942263] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B [ 3.942351] [drm:intel_dp_init_connector [i915]] using AUX B for port B (platform default) [ 3.942448] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 3.942458] [drm] forcing HDMI-A-1 connector on [ 3.942478] [drm:drm_connector_init [drm]] cmdline mode for connector HDMI-A-1 1600x900@60Hz [ 3.942563] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default) [ 3.942657] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C [ 3.942741] [drm:intel_dp_init_connector [i915]] using AUX C for port C (platform default) [ 3.942835] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 3.942920] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default) [ 3.943002] [drm:intel_dsi_init [i915]] [ 3.943112] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 3.943197] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: enabled [ 3.943292] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x1 [ 3.943375] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:52:pipe B] hw state readout: enabled [ 3.943463] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:CRT] hw state readout: enabled, pipe A [ 3.943549] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DP B] hw state readout: disabled, pipe A [ 3.943634] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:59:HDMI B] hw state readout: disabled, pipe A [ 3.943725] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP C] hw state readout: enabled, pipe B [ 3.943809] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:64:HDMI C] hw state readout: disabled, pipe A [ 3.943895] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:VGA-1] hw state readout: enabled [ 3.943982] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:56:DP-1] hw state readout: disabled [ 3.944066] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:60:HDMI-A-1] hw state readout: disabled [ 3.944192] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:DP-2] hw state readout: enabled [ 3.944311] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:65:HDMI-A-2] hw state readout: disabled [ 3.944425] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state] [ 3.944510] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2) [ 3.944593] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 3.944676] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 3.944758] [drm:intel_dump_pipe_config [i915]] requested mode: [ 3.944780] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.944862] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 3.944882] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3.944968] [drm:intel_dump_pipe_config [i915]] crtc timings: 40000 800 840 968 1056 600 601 605 628, type: 0x40 flags: 0x5 [ 3.945051] [drm:intel_dump_pipe_config [i915]] port clock: 40000, pipe src size: 800x600, pixel rate 40000 [ 3.945143] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.945231] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 3.945315] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 3.945397] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 3.945480] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] disabled, scaler_id = 0 [ 3.945563] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0 [ 3.945647] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0 [ 3.945730] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 3.945822] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][setup_hw_state] [ 3.945905] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80) [ 3.945988] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 18, dithering: 0 [ 3.946073] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 7573048, gmch_n: 8388608, link_m: 210362, link_n: 524288, tu: 64 [ 3.946155] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 3.946237] [drm:intel_dump_pipe_config [i915]] requested mode: [ 3.946258] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 64999 800 936 1072 1344 600 687 693 806 0x40 0x5 [ 3.946340] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 3.946367] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 64999 800 936 1072 1344 600 687 693 806 0x40 0x5 [ 3.946453] [drm:intel_dump_pipe_config [i915]] crtc timings: 64999 800 936 1072 1344 600 687 693 806, type: 0x40 flags: 0x5 [ 3.946536] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 800x600, pixel rate 64999 [ 3.946618] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 3.946701] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 3.946783] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 3.946881] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 3.946965] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = 0 [ 3.947048] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0 [ 3.947141] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0 [ 3.947224] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0 [ 3.947309] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 3.947385] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 3.947459] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 3.947595] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane A/0 with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00 [ 3.947677] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000 [ 3.947794] [drm:intel_alloc_initial_plane_obj.isra.120 [i915]] initial plane fb obj ffff880077b5bc40 [ 3.947883] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 3.947973] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane B/1 with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00 [ 3.948054] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000 [ 3.948163] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space [ 3.948260] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x1 [ 3.948343] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null) [ 3.948424] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null) [ 3.948627] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1d6000, 80000000] [ 3.953320] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00 [ 3.953407] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000 [ 3.953509] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 3.953808] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x001d6000 [ 3.953913] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdfd000 [ 3.954149] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x001f7000 [ 3.954364] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x00218000 [ 3.954464] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 3.954545] [drm:intel_init_gt_powersave [i915]] PCBR: 0x7eefa001 [ 3.954624] [drm:vlv_init_gpll_ref_freq [i915]] GPLL reference freq: 22222 kHz [ 3.954705] [drm:intel_init_gt_powersave [i915]] DDR speed: 1066 MHz [ 3.954782] [drm:intel_init_gt_powersave [i915]] max GPU freq: 533 MHz (207) [ 3.954862] [drm:intel_init_gt_powersave [i915]] RPe GPU freq: 533 MHz (207) [ 3.954943] [drm:intel_init_gt_powersave [i915]] RP1(Guar Freq) GPU freq: 533 MHz (207) [ 3.955020] [drm:intel_init_gt_powersave [i915]] min GPU freq: 200 MHz (192) [ 3.955129] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0 [ 3.955307] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on [ 3.955392] [drm:intel_enable_gt_powersave [i915]] GPLL enabled? yes [ 3.955467] [drm:intel_enable_gt_powersave [i915]] GPU status: 0x0000cf90 [ 3.955894] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 3.955977] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 3.956060] [drm:intel_fbdev_init [i915]] pipe A area: 800x600, bpp: 32, size: 1920000 [ 3.956182] [drm:intel_fbdev_init [i915]] fb big enough for plane A (1921024 >= 1920000) [ 3.956263] [drm:intel_fbdev_init [i915]] checking plane B for BIOS fb [ 3.956344] [drm:intel_fbdev_init [i915]] pipe B area: 800x600, bpp: 32, size: 1920000 [ 3.956424] [drm:intel_fbdev_init [i915]] fb big enough for plane B (1921024 >= 1920000) [ 3.956504] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console [ 3.956623] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=0 [ 3.956709] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 3.957086] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.957209] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.957306] intel_soc_dts_thermal: request_threaded_irq ret -22 [ 3.962361] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 [ 3.962666] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2 [ 3.962851] [drm] Initialized i915 1.6.0 20171109 for 0000:00:02.0 on minor 0 [ 3.962862] pstore: using zlib compression [ 3.963149] [drm:intel_opregion_register [i915]] 5 outputs detected [ 3.963452] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 3.963534] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 3.963551] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:53:VGA-1] status updated from unknown to connected [ 3.963633] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 3.963648] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:56:DP-1] status updated from unknown to disconnected [ 3.963728] [drm:intel_hdmi_detect [i915]] [CONNECTOR:60:HDMI-A-1] [ 3.966200] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.967694] acpi device:09: registered as cooling_device3 [ 3.967875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 3.968731] [drm] Got external EDID base block and 0 extensions from "edid/sims19in.bin" for connector "HDMI-A-1" [ 3.970884] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 3.970965] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 3.972159] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 3.972184] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 3.972200] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] status updated from unknown to connected [ 3.972283] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2] [ 3.972297] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:DP-2] status updated from unknown to disconnected [ 3.972378] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2] [ 3.974513] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.974594] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.976152] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 3.976184] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 3.978315] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.978396] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 3.980150] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 3.980170] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 3.980183] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] status updated from unknown to disconnected [ 3.980374] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.980421] [drm:drm_setup_crtcs [drm_kms_helper]] [ 3.980438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] [ 3.980535] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1 [ 3.980623] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 3.998208] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 3.998290] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 4.003936] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4.038130] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.038418] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes : [ 4.038439] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.038459] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.038478] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.038497] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 4.038516] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.038535] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 4.038554] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 4.038573] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.038592] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 4.038611] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.038630] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.038649] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.038668] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.038687] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.038698] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] [ 4.038794] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 4.038808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected [ 4.038818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] [ 4.038899] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1] [ 4.039118] [drm] Got external EDID base block and 0 extensions from "edid/sims19in.bin" for connector "HDMI-A-1" [ 4.041271] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.041352] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.043546] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.043566] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.043599] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.044139] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes : [ 4.044161] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.044180] [drm:drm_mode_debug_printmodeline [drm]] Modeline 93:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.044200] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.044219] [drm:drm_mode_debug_printmodeline [drm]] Modeline 99:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 4.044238] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.044257] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 4.044280] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 4.044299] [drm:drm_mode_debug_printmodeline [drm]] Modeline 96:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.044318] [drm:drm_mode_debug_printmodeline [drm]] Modeline 97:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 4.044337] [drm:drm_mode_debug_printmodeline [drm]] Modeline 98:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.044356] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.044375] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.044394] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.044413] [drm:drm_mode_debug_printmodeline [drm]] Modeline 92:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.044424] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] [ 4.044520] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2] [ 4.044535] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] disconnected [ 4.044546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] [ 4.044626] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2] [ 4.046762] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.046843] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.048244] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.048272] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 4.050416] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.050497] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.052150] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.052168] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.052181] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] disconnected [ 4.052192] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes [ 4.052200] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no [ 4.052208] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes [ 4.052215] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no [ 4.052223] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? no [ 4.052311] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 4.052322] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53 [ 4.052330] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0 [ 4.052338] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.052345] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60 [ 4.052353] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.052361] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 4.052378] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0) [ 4.052393] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0) [ 4.052479] [drm:intelfb_create [i915]] BIOS fb too small (800x600), we require (1600x900), releasing it [ 4.052560] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 4.055425] [drm:intelfb_create [i915]] allocated 1600x900 fb: 0x00240000 [ 4.055580] fbcon: inteldrmfb (fb0) is primary device [ 4.055881] [drm:intel_atomic_check [i915]] [CONNECTOR:53:VGA-1] checking for sink bpp constrains [ 4.055964] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24 [ 4.056050] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0 [ 4.056208] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][modeset] [ 4.056291] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2) [ 4.056377] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 4.056459] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.056540] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.056565] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.056646] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.056666] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.056753] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1600 1624 1704 1800 900 901 904 1000, type: 0x48 flags: 0x5 [ 4.056836] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1600x900, pixel rate 108000 [ 4.056919] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.057004] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.057086] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 4.057167] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.057254] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] FB:68, fb = 800x600 format = XR24 little-endian (0x34325258) [ 4.057336] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0 [ 4.057418] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0 [ 4.057503] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 4.057591] [drm:intel_atomic_check [i915]] [CONNECTOR:60:HDMI-A-1] checking for sink bpp constrains [ 4.057673] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24 [ 4.057775] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output [ 4.057853] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI [ 4.057937] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0 [ 4.058022] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][modeset] [ 4.058104] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) [ 4.058186] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 [ 4.058271] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.058352] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.058373] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.058457] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.058476] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.058560] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1600 1624 1704 1800 900 901 904 1000, type: 0x48 flags: 0x5 [ 4.058643] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1600x900, pixel rate 108000 [ 4.058728] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.058810] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.058892] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 4.058976] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.059062] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] FB:68, fb = 800x600 format = XR24 little-endian (0x34325258) [ 4.059144] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0 [ 4.059229] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0 [ 4.059311] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0 [ 4.059399] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 266667 kHz, actual 266667 kHz [ 4.059483] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 [ 4.059621] [drm:vlv_compute_pipe_wm [i915]] primary A watermarks: PM2=100, PM5=0, DDR DVFS=0 [ 4.059749] [drm:vlv_compute_pipe_wm [i915]] primary B watermarks: PM2=100, PM5=0, DDR DVFS=0 [ 4.061547] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 4.061648] [drm:intel_disable_pipe [i915]] disabling pipe A [ 4.062786] pstore: Registered efi as persistent store backend [ 4.064228] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 4.064328] [drm:intel_disable_pipe [i915]] disabling pipe B [ 4.068172] [drm:intel_dp_link_down.isra.23 [i915]] [ 4.076181] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 266667 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 1 [ 4.078344] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:CRT] [ 4.078429] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP B] [ 4.078511] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:HDMI B] [ 4.078593] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP C] [ 4.078679] [drm:intel_atomic_commit_tail [i915]] [ENCODER:64:HDMI C] [ 4.078761] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:63:DP-2] [ 4.079094] [drm:intel_enable_pipe [i915]] enabling pipe A [ 4.079521] [drm:intel_enable_pipe [i915]] enabling pipe B [ 4.096350] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:53:VGA-1] [ 4.096445] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A] [ 4.096550] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:60:HDMI-A-1] [ 4.096646] [drm:intel_atomic_commit_tail [i915]] [CRTC:52:pipe B] [ 4.096705] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 4.096713] [drm:drm_setup_crtcs [drm_kms_helper]] [ 4.096726] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] [ 4.096815] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1 [ 4.096899] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 4.114192] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 4.114273] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 4.145408] iTCO_vendor_support: vendor-support=0 [ 4.146269] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.146361] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 4.147872] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.152125] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.152514] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.152538] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y [ 4.152566] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.152588] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y [ 4.152610] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes : [ 4.152638] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.152665] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 4.152692] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.152718] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 4.152745] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 4.152771] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.152798] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 4.152824] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.152850] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.152876] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.152903] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.152929] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.152944] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] [ 4.153076] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 4.153097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected [ 4.153111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] [ 4.153227] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1] [ 4.153510] [drm] Got external EDID base block and 0 extensions from "edid/sims19in.bin" for connector "HDMI-A-1" [ 4.155705] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.155818] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.157978] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.158005] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.158041] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.158482] [drm:drm_mode_debug_printmodeline [drm]] Modeline 93:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.158498] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y [ 4.158518] [drm:drm_mode_debug_printmodeline [drm]] Modeline 88:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.158534] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y [ 4.158548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes : [ 4.158568] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.158586] [drm:drm_mode_debug_printmodeline [drm]] Modeline 99:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 4.158605] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.158623] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 4.158642] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 4.158661] [drm:drm_mode_debug_printmodeline [drm]] Modeline 96:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.158679] [drm:drm_mode_debug_printmodeline [drm]] Modeline 97:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 4.158698] [drm:drm_mode_debug_printmodeline [drm]] Modeline 98:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.158716] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.158735] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.158753] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.158772] [drm:drm_mode_debug_printmodeline [drm]] Modeline 92:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.158782] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] [ 4.158875] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2] [ 4.158889] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] disconnected [ 4.158899] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] [ 4.158979] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2] [ 4.160174] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.160253] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.162389] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.162412] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 4.164167] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.164246] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.166381] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.166399] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.166410] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] disconnected [ 4.166421] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes [ 4.166429] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no [ 4.166436] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes [ 4.166443] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no [ 4.166450] [drm:drm_setup_crtcs [drm_kms_helper]] connector 65 enabled? no [ 4.166538] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 4.166548] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53 [ 4.166556] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0 [ 4.166563] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.166570] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60 [ 4.166577] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.166584] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1600x900 config [ 4.166604] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0) [ 4.166617] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0) [ 4.179631] Console: switching to colour frame buffer device 200x56 [ 4.209688] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.277066] input: DIALOGUE INC PenMount USB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:14E1:6000.0001/input/input5 [ 4.277855] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/0003:046D:C31C.0002/input/input6 [ 4.278243] hid-penmount 0003:14E1:6000.0001: input,hidraw0: USB HID v1.01 Mouse [DIALOGUE INC PenMount USB] on usb-0000:00:14.0-4.4/input0 [ 4.302459] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.302466] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.302471] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.302474] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.302477] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.302481] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 4.302485] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.343398] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input0 [ 4.343908] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.1/0003:046D:C31C.0003/input/input7 [ 4.358315] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 4.358324] snd_hda_codec_generic hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.358328] snd_hda_codec_generic hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.358331] snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0 [ 4.358335] snd_hda_codec_generic hdaudioC0D2: dig-out=0x4/0x0 [ 4.358337] snd_hda_codec_generic hdaudioC0D2: inputs: [ 4.362375] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.412607] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input1 [ 4.782700] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.933880] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 4.933904] br0: port 1(enp2s0) entered blocking state [ 4.933907] br0: port 1(enp2s0) entered disabled state [ 4.934033] device enp2s0 entered promiscuous mode [ 4.958442] IPv6: ADDRCONF(NETDEV_UP): veth0a: link is not ready [ 4.958457] br0: port 2(veth0a) entered blocking state [ 4.958459] br0: port 2(veth0a) entered disabled state [ 4.959119] device veth0a entered promiscuous mode [ 4.973585] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 5.059744] IPv6: ADDRCONF(NETDEV_CHANGE): veth0a: link becomes ready [ 5.059803] br0: port 2(veth0a) entered blocking state [ 5.059807] br0: port 2(veth0a) entered forwarding state [ 5.059884] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 5.414088] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.515482] [drm:drm_mode_addfb2 [drm]] [FB:79] [ 5.516247] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb [ 5.516271] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 5.516322] [drm:intel_framebuffer_init [i915]] Unsupported tiling 0x100000000000002! [ 5.516340] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 5.516405] [drm:drm_mode_addfb2 [drm]] [FB:79] [ 5.693768] [drm:drm_mode_addfb2 [drm]] [FB:79] [ 5.751373] IPv6: ADDRCONF(NETDEV_UP): veth1a: link is not ready [ 5.812910] IPv6: ADDRCONF(NETDEV_CHANGE): veth1a: link becomes ready [ 6.427273] [drm:drm_mode_addfb2 [drm]] [FB:94] [ 6.428706] [drm:drm_mode_setcrtc [drm]] [CRTC:39:pipe A] [ 6.428741] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:53:VGA-1] [ 6.446539] [drm:drm_mode_setcrtc [drm]] [CRTC:52:pipe B] [ 6.446576] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:60:HDMI-A-1] [ 6.572644] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 6.572968] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 6.689136] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=63, PM5=0, DDR DVFS=0 [ 6.689434] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=63, PM5=0, DDR DVFS=0 [ 6.747978] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0) [ 7.519453] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] [ 7.519505] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 7.519522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected [ 7.519559] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] [ 7.519600] [drm:intel_dp_detect [i915]] [CONNECTOR:63:DP-2] [ 7.519612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:DP-2] disconnected [ 7.519635] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] [ 7.519677] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1] [ 7.519997] [drm] Got external EDID base block and 0 extensions from "edid/sims19in.bin" for connector "HDMI-A-1" [ 7.522720] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 7.522760] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 7.524183] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 7.524202] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 7.524241] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 7.524814] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes : [ 7.524837] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 7.524857] [drm:drm_mode_debug_printmodeline [drm]] Modeline 111:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 7.524876] [drm:drm_mode_debug_printmodeline [drm]] Modeline 106:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 7.524898] [drm:drm_mode_debug_printmodeline [drm]] Modeline 99:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 7.524917] [drm:drm_mode_debug_printmodeline [drm]] Modeline 87:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 7.524937] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 7.524956] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 7.524975] [drm:drm_mode_debug_printmodeline [drm]] Modeline 96:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 7.524997] [drm:drm_mode_debug_printmodeline [drm]] Modeline 97:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 7.525016] [drm:drm_mode_debug_printmodeline [drm]] Modeline 98:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 7.525035] [drm:drm_mode_debug_printmodeline [drm]] Modeline 89:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 7.525054] [drm:drm_mode_debug_printmodeline [drm]] Modeline 90:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 7.525073] [drm:drm_mode_debug_printmodeline [drm]] Modeline 91:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 7.525095] [drm:drm_mode_debug_printmodeline [drm]] Modeline 92:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 7.525242] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] [ 7.525290] [drm:intel_hdmi_detect [i915]] [CONNECTOR:65:HDMI-A-2] [ 7.528162] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 7.528204] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 7.530285] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 7.530311] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 7.532547] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 7.532586] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 7.534649] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 7.534666] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 7.534678] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:65:HDMI-A-2] disconnected [ 7.534725] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] [ 7.534771] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1 [ 7.534815] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 7.547780] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 7.547822] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 7.567133] systemd-journald[16]: Received request to flush runtime journal from PID 1 [ 7.590183] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 7.590481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes : [ 7.590503] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 7.590522] [drm:drm_mode_debug_printmodeline [drm]] Modeline 113:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 7.590542] [drm:drm_mode_debug_printmodeline [drm]] Modeline 107:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 7.590561] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 7.590580] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 7.590599] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 7.590619] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 7.590638] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 7.590657] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 7.590675] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 7.590694] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 7.590713] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 7.590732] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 7.590751] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 7.673216] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=0, PM5=0, DDR DVFS=0 [ 7.680555] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=0, PM5=0, DDR DVFS=0 [ 7.763187] [drm:drm_mode_addfb2 [drm]] [FB:78] [ 7.951584] [drm:drm_mode_addfb2 [drm]] [FB:88] [ 8.820898] [drm:drm_mode_addfb2 [drm]] [FB:93] [ 22.129352] random: crng init done