[ 0.000000] Linux version 4.14.0sims1-g06718a287f28 (tkazimierczak@stretch64poligon) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Wed Nov 15 16:14:54 CET 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28 root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000793b5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000793b6000-0x00000000793e5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000793e6000-0x00000000793f5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000793f6000-0x00000000798ddfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000798de000-0x0000000079b63fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079b64000-0x0000000079baefff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000079baf000-0x0000000079baffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079bb0000-0x0000000079bf1fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079bf2000-0x0000000079d62fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079d63000-0x0000000079ff9fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0x793ed000 ACPI 2.0=0x793ed000 ESRT=0x79b60018 SMBIOS=0xf0560 MPS=0xfd5f0 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: AAEON GENE-BT05/GENE-BT05, BIOS V012NM10 07/20/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07A800000 mask FFF800000 uncachable [ 0.000000] 2 base 07B000000 mask FFF000000 uncachable [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffffffffff240810] [ 0.000000] esrt: Reserving ESRT space from 0x0000000079b60018 to 0x0000000079b60050. [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE [ 0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE [ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE [ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE [ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE [ 0.000000] BRK [0x01a91000, 0x01a91fff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x371b5000-0x378d1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000793ED000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000793ED080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000793F4F30 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170728/tbfadt-603) [ 0.000000] ACPI: DSDT 0x00000000793ED188 007DA5 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000798DDF80 000040 [ 0.000000] ACPI: APIC 0x00000000793F5040 000068 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000793F50A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: LPIT 0x00000000793F50F0 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D) [ 0.000000] ACPI: MCFG 0x00000000793F51F8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000793F5238 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000793F5270 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000793F59D8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000793F5C68 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000793F5DE8 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: CSRT 0x00000000793F5E30 00014C (v00 INTEL EDK2 00000005 INTL 20120624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000003efff] [ 0.000000] node 0: [mem 0x0000000000040000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.000000] node 0: [mem 0x000000001f100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020100000-0x00000000793b5fff] [ 0.000000] node 0: [mem 0x0000000079baf000-0x0000000079baffff] [ 0.000000] node 0: [mem 0x0000000079bf2000-0x0000000079d62fff] [ 0.000000] node 0: [mem 0x0000000079ffa000-0x0000000079ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff] [ 0.000000] On node 0 totalpages: 496332 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7744 pages used for memmap [ 0.000000] DMA32 zone: 492334 pages, LIFO batch:31 [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x793b6000-0x793e5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x793e6000-0x793f5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x793f6000-0x798ddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x798de000-0x79b63fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79b64000-0x79baefff] [ 0.000000] PM: Registered nosave memory: [mem 0x79bb0000-0x79bf1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79d63000-0x79ff9fff] [ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff880076400000 s107032 r8192 d32232 u1048576 [ 0.000000] pcpu-alloc: s107032 r8192 d32232 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 488498 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0sims1-g06718a287f28 root=UUID=9293316a-c68c-446a-8482-55da58c06e16 ro drm.debug=0xe log_bug_len=1M video=HDMI-A-1:1600x900e [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1886448K/1985328K available (5390K kernel code, 919K rwdata, 1864K rodata, 1152K init, 452K bss, 98880K reserved, 0K cma-reserved) [ 0.000000] ftrace: allocating 23818 entries in 94 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 4352, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Detected 1333.000 MHz processor [ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.00 BogoMIPS (lpj=5332000) [ 0.000032] pid_max: default: 32768 minimum: 301 [ 0.000075] ACPI: Core revision 20170728 [ 0.015930] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.017131] Security Framework initialized [ 0.017188] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.017209] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.017660] CPU: Physical Processor ID: 0 [ 0.017671] CPU: Processor Core ID: 0 [ 0.017681] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.017688] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.017709] mce: CPU supports 6 MCE banks [ 0.017724] CPU0: Thermal monitoring enabled (TM1) [ 0.017735] process: using mwait in idle threads [ 0.017746] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.017754] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.018005] Freeing SMP alternatives memory: 24K [ 0.022642] smpboot: Max logical packages: 1 [ 0.023404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.063122] TSC deadline timer enabled [ 0.063127] smpboot: CPU0: Intel(R) Atom(TM) CPU E3825 @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x9) [ 0.063383] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.063423] ... version: 3 [ 0.063430] ... bit width: 40 [ 0.063436] ... generic registers: 2 [ 0.063442] ... value mask: 000000ffffffffff [ 0.063448] ... max period: 0000007fffffffff [ 0.063455] ... fixed-purpose events: 3 [ 0.063461] ... event mask: 0000000700000003 [ 0.063575] Hierarchical SRCU implementation. [ 0.064000] smp: Bringing up secondary CPUs ... [ 0.064000] x86: Booting SMP configuration: [ 0.064000] .... node #0, CPUs: #1 [ 0.064000] smp: Brought up 1 node, 2 CPUs [ 0.064000] smpboot: Total of 2 processors activated (5332.00 BogoMIPS) [ 0.064000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.064000] devtmpfs: initialized [ 0.064000] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes) [ 0.064000] PM: Registering ACPI NVS region [mem 0x793f6000-0x798ddfff] (5144576 bytes) [ 0.064000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064000] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.064000] pinctrl core: initialized pinctrl subsystem [ 0.064316] NET: Registered protocol family 16 [ 0.064779] cpuidle: using governor ladder [ 0.064804] cpuidle: using governor menu [ 0.064903] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.064916] ACPI: bus type PCI registered [ 0.065064] PCI: Using configuration type 1 for base access [ 0.065687] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.065687] ACPI: Added _OSI(Module Device) [ 0.065687] ACPI: Added _OSI(Processor Device) [ 0.065687] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.065687] ACPI: Added _OSI(Processor Aggregator Device) [ 0.080369] ACPI: Dynamic OEM Table Load: [ 0.080397] ACPI: SSDT 0xFFFF880076341C00 0002F6 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.081032] ACPI: Dynamic OEM Table Load: [ 0.081053] ACPI: SSDT 0xFFFF8800761F5800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.082458] ACPI: Dynamic OEM Table Load: [ 0.082479] ACPI: SSDT 0xFFFF880076101E00 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.083062] ACPI: Dynamic OEM Table Load: [ 0.083081] ACPI: SSDT 0xFFFF880076352900 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.085335] ACPI: Interpreter enabled [ 0.085403] ACPI: (supports S0 S3 S4 S5) [ 0.085412] ACPI: Using IOAPIC for interrupt routing [ 0.085514] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.086567] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.522942] ACPI: Power Resource [USBC] (on) [ 0.526423] ACPI: Power Resource [PLPE] (on) [ 0.527138] ACPI: Power Resource [PLPE] (on) [ 0.529861] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.529883] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.530530] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.531296] PCI host bridge to bus 0000:00 [ 0.531309] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.531320] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.531330] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.531340] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.531350] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.531361] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.531372] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.531383] pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0822ffe window] [ 0.531395] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.531417] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.531726] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.531747] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff] [ 0.531763] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.531777] pci 0000:00:02.0: reg 0x20: [io 0xe080-0xe087] [ 0.531805] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.532101] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501 [ 0.532129] pci 0000:00:12.0: reg 0x10: [mem 0xd0822000-0xd0822fff] [ 0.532142] pci 0000:00:12.0: reg 0x14: [mem 0xd0821000-0xd0821fff] [ 0.532227] pci 0000:00:12.0: PME# supported from D0 D3hot [ 0.532484] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.532512] pci 0000:00:13.0: reg 0x10: [io 0xe070-0xe077] [ 0.532524] pci 0000:00:13.0: reg 0x14: [io 0xe060-0xe063] [ 0.532536] pci 0000:00:13.0: reg 0x18: [io 0xe050-0xe057] [ 0.532548] pci 0000:00:13.0: reg 0x1c: [io 0xe040-0xe043] [ 0.532560] pci 0000:00:13.0: reg 0x20: [io 0xe020-0xe03f] [ 0.532573] pci 0000:00:13.0: reg 0x24: [mem 0xd0820000-0xd08207ff] [ 0.532633] pci 0000:00:13.0: PME# supported from D3hot [ 0.532888] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.532916] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit] [ 0.532994] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.533258] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.533293] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff] [ 0.533310] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff] [ 0.533429] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.533729] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.533761] pci 0000:00:1b.0: reg 0x10: [mem 0xd0814000-0xd0817fff 64bit] [ 0.533851] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.534106] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.534189] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.534450] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.534532] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.534792] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.534874] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.535136] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.535218] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.535487] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.535831] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.535881] pci 0000:00:1f.3: reg 0x10: [mem 0xd081c000-0xd081c01f] [ 0.535958] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f] [ 0.536432] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000 [ 0.536475] pci 0000:01:00.0: reg 0x10: [mem 0xd0700000-0xd071ffff] [ 0.536517] pci 0000:01:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.536535] pci 0000:01:00.0: reg 0x1c: [mem 0xd0720000-0xd0723fff] [ 0.536683] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.548044] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.548062] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.548068] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff] [ 0.548215] pci 0000:02:00.0: [8086:1539] type 00 class 0x020000 [ 0.548258] pci 0000:02:00.0: reg 0x10: [mem 0xd0600000-0xd061ffff] [ 0.548300] pci 0000:02:00.0: reg 0x18: [io 0xc000-0xc01f] [ 0.548329] pci 0000:02:00.0: reg 0x1c: [mem 0xd0620000-0xd0623fff] [ 0.548478] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.560040] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.560055] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.560061] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff] [ 0.560167] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.560276] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.560317] pci_bus 0000:00: on NUMA node 0 [ 0.768776] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.769004] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.769225] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.769445] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.769666] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.769886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.770106] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.770330] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.771233] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.771233] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.771233] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.771233] vgaarb: loaded [ 0.771233] Registered efivars operations [ 0.784814] PCI: Using ACPI for IRQ routing [ 0.784826] PCI: pci_cache_line_size set to 64 bytes [ 0.784847] pci 0000:00:12.0: can't claim BAR 0 [mem 0xd0822000-0xd0822fff]: no compatible bridge window [ 0.784953] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 0.784957] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.784960] e820: reserve RAM buffer [mem 0x793b6000-0x7bffffff] [ 0.784964] e820: reserve RAM buffer [mem 0x79bb0000-0x7bffffff] [ 0.784968] e820: reserve RAM buffer [mem 0x79d63000-0x7bffffff] [ 0.784971] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.785276] clocksource: Switched to clocksource refined-jiffies [ 0.809606] pnp: PnP ACPI init [ 0.809745] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.810102] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.810117] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.810128] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.810139] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.810159] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.810661] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.810675] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.810686] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.810706] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.810824] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.810980] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.811868] pnp 00:05: [dma 3] [ 0.812202] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.812832] pnp 00:06: [dma 0 disabled] [ 0.812969] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.813606] pnp 00:07: [dma 0 disabled] [ 0.813731] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.814345] pnp 00:08: [dma 0 disabled] [ 0.814474] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.815085] pnp 00:09: [dma 0 disabled] [ 0.815209] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.020692] system 00:0a: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.020709] system 00:0a: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.020721] system 00:0a: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.020732] system 00:0a: [mem 0xfed04000-0xfed04fff] has been reserved [ 1.020743] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved [ 1.020756] system 00:0a: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.020768] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.020779] system 00:0a: [mem 0xfef00000-0xfeffffff] has been reserved [ 1.020800] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.021425] pnp: PnP ACPI: found 11 devices [ 1.030367] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.030408] clocksource: Switched to clocksource acpi_pm [ 1.030467] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 1.030482] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 1.030495] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 1.030501] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 1.030506] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 1.030517] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1.030523] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 1.030528] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 1.030565] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 1.030587] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 1.030602] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80400000-0x805fffff] [ 1.030621] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref] [ 1.030635] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80800000-0x809fffff] [ 1.030654] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref] [ 1.030668] pci 0000:00:12.0: BAR 0: assigned [mem 0x80c00000-0x80c00fff] [ 1.030686] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff] [ 1.030698] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff] [ 1.030714] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.030724] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.030737] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff] [ 1.030749] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 1.030764] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.030773] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.030786] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff] [ 1.030797] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 1.030812] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.030822] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 1.030834] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x805fffff] [ 1.030845] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff 64bit pref] [ 1.030860] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.030869] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.030882] pci 0000:00:1c.3: bridge window [mem 0x80800000-0x809fffff] [ 1.030893] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80bfffff 64bit pref] [ 1.030909] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.030914] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.030918] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.030922] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.030926] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.030929] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.030933] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 1.030937] pci_bus 0000:00: resource 11 [mem 0x80000000-0xd0822ffe window] [ 1.030942] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 1.030945] pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff] [ 1.030949] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 1.030953] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.030957] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.030961] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 1.030965] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 1.030969] pci_bus 0000:03: resource 1 [mem 0x80400000-0x805fffff] [ 1.030972] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref] [ 1.030977] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 1.030980] pci_bus 0000:04: resource 1 [mem 0x80800000-0x809fffff] [ 1.030984] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref] [ 1.031283] NET: Registered protocol family 2 [ 1.031633] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.031715] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.031837] TCP: Hash tables configured (established 16384 bind 16384) [ 1.031937] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.031974] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.031974] NET: Registered protocol family 1 [ 1.031974] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.031974] PCI: CLS 64 bytes, default 64 [ 1.031974] Unpacking initramfs... [ 1.324610] Freeing initrd memory: 7284K [ 1.324794] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1336e3dbd1a, max_idle_ns: 440795236868 ns [ 1.324855] clocksource: Switched to clocksource tsc [ 1.325542] audit: initializing netlink subsys (disabled) [ 1.325676] audit: type=2000 audit(1511951875.324:1): state=initialized audit_enabled=0 res=1 [ 1.326195] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 1.327610] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.327699] io scheduler noop registered [ 1.327709] io scheduler deadline registered [ 1.327753] io scheduler cfq registered (default) [ 1.327762] io scheduler mq-deadline registered [ 1.327769] io scheduler kyber registered [ 1.329011] intel_idle: MWAIT substates: 0x3000020 [ 1.329015] intel_idle: v0.4.1 model 0x37 [ 1.329184] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.332940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.353863] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.375167] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.396530] 00:08: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A [ 1.417673] 00:09: ttyS3 at I/O 0x2e8 (irq = 10, base_baud = 115200) is a 16550A [ 1.420530] hpet: number irqs doesn't agree with number of timers [ 1.422207] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.422691] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.422714] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.422921] rtc_cmos 00:00: RTC can wake from S4 [ 1.424364] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.424461] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 1.424519] IR NEC protocol handler initialized [ 1.424527] IR RC5(x/sz) protocol handler initialized [ 1.424533] IR RC6 protocol handler initialized [ 1.424539] IR JVC protocol handler initialized [ 1.424545] IR Sony protocol handler initialized [ 1.424551] IR SANYO protocol handler initialized [ 1.424558] IR Sharp protocol handler initialized [ 1.424564] IR MCE Keyboard/mouse protocol handler initialized [ 1.424570] IR XMP protocol handler initialized [ 1.424583] intel_pstate: Intel P-state driver initializing [ 1.427303] NET: Registered protocol family 10 [ 1.429487] Segment Routing with IPv6 [ 1.429588] mip6: Mobile IPv6 [ 1.429611] NET: Registered protocol family 17 [ 1.431438] microcode: sig=0x30679, pf=0x1, revision=0x903 [ 1.432452] microcode: Microcode Update Driver: v2.2. [ 1.432507] sched_clock: Marking stable (1432391468, 0)->(1438847540, -6456072) [ 1.434321] registered taskstats version 1 [ 1.435667] rtc_cmos 00:00: setting system clock to 2017-11-29 10:37:55 UTC (1511951875) [ 1.450571] Freeing unused kernel memory: 1152K [ 1.450588] Write protecting the kernel read-only data: 8192k [ 1.452141] Freeing unused kernel memory: 740K [ 1.454024] Freeing unused kernel memory: 184K [ 1.629329] pps_core: LinuxPPS API ver. 1 registered [ 1.629344] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.629897] PTP clock support registered [ 1.630442] dca service started, version 1.12.1 [ 1.640083] SCSI subsystem initialized [ 1.643816] libata version 3.00 loaded. [ 1.643924] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.643940] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.647138] ACPI: bus type USB registered [ 1.647230] usbcore: registered new interface driver usbfs [ 1.647268] usbcore: registered new interface driver hub [ 1.648412] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.653346] usbcore: registered new device driver usb [ 1.860827] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.860889] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.862102] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 1.862141] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.862620] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.862652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.862678] usb usb1: Product: xHCI Host Controller [ 1.862698] usb usb1: Manufacturer: Linux 4.14.0sims1-g06718a287f28 xhci-hcd [ 1.862721] usb usb1: SerialNumber: 0000:00:14.0 [ 1.863491] hub 1-0:1.0: USB hub found [ 1.863570] hub 1-0:1.0: 6 ports detected [ 1.866463] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.866509] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.866757] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.866770] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.866780] usb usb2: Product: xHCI Host Controller [ 1.866789] usb usb2: Manufacturer: Linux 4.14.0sims1-g06718a287f28 xhci-hcd [ 1.866798] usb usb2: SerialNumber: 0000:00:14.0 [ 1.867129] hub 2-0:1.0: USB hub found [ 1.867159] hub 2-0:1.0: 1 port detected [ 1.867607] ahci 0000:00:13.0: version 3.0 [ 1.867841] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 1.878467] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode [ 1.878499] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso [ 1.880173] scsi host0: ahci [ 1.881050] scsi host1: ahci [ 1.881262] ata1: DUMMY [ 1.881279] ata2: SATA max UDMA/133 abar m2048@0xd0820000 port 0xd0820180 irq 88 [ 1.899967] pps pps0: new PPS source ptp0 [ 1.900003] igb 0000:01:00.0: added PHC on eth0 [ 1.900075] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.900101] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:20 [ 1.900127] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF [ 1.900149] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.175112] pps pps1: new PPS source ptp1 [ 2.175148] igb 0000:02:00.0: added PHC on eth1 [ 2.175169] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.175195] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:07:32:32:8b:21 [ 2.175220] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF [ 2.175242] igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.183487] igb 0000:02:00.0 enp2s0: renamed from eth1 [ 2.194422] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.196080] ata2.00: ATA-10: 8GB SATA Flash Drive, SFPS918A, max UDMA/133 [ 2.196105] ata2.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.196714] ata2.00: configured for UDMA/133 [ 2.197146] scsi 1:0:0:0: Direct-Access ATA 8GB SATA Flash D 918A PQ: 0 ANSI: 5 [ 2.198145] igb 0000:01:00.0 enp1s0: renamed from eth0 [ 2.200130] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 2.208660] sd 1:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 2.208716] sd 1:0:0:0: [sda] Write Protect is off [ 2.208728] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.208796] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.210939] sda: sda1 sda2 sda3 [ 2.211972] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.372443] raid6: sse2x1 gen() 769 MB/s [ 2.440358] raid6: sse2x1 xor() 1348 MB/s [ 2.508394] raid6: sse2x2 gen() 1149 MB/s [ 2.576362] raid6: sse2x2 xor() 1600 MB/s [ 2.644371] raid6: sse2x4 gen() 1725 MB/s [ 2.712358] raid6: sse2x4 xor() 1763 MB/s [ 2.712366] raid6: using algorithm sse2x4 gen() 1725 MB/s [ 2.712373] raid6: .... xor() 1763 MB/s, rmw enabled [ 2.712380] raid6: using ssse3x2 recovery algorithm [ 2.722893] xor: measuring software checksum speed [ 2.760356] prefetch64-sse: 4174.000 MB/sec [ 2.800352] generic_sse: 3785.000 MB/sec [ 2.800361] xor: using function: prefetch64-sse (4174.000 MB/sec) [ 2.800570] usb 1-4: New USB device found, idVendor=0424, idProduct=2514 [ 2.800583] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.801463] hub 1-4:1.0: USB hub found [ 2.801519] hub 1-4:1.0: 4 ports detected [ 2.817034] Btrfs loaded, crc32c=crc32c-intel [ 2.952250] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem [ 2.954889] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 3.092112] usb 1-4.2: new high-speed USB device number 3 using xhci_hcd [ 3.132552] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.189873] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.190266] systemd[1]: Detected architecture x86-64. [ 3.192386] usb 1-4.2: New USB device found, idVendor=1a40, idProduct=0201 [ 3.192417] systemd[1]: Set hostname to . [ 3.192430] usb 1-4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.192438] usb 1-4.2: Product: USB 2.0 Hub [MTT] [ 3.193254] hub 1-4.2:1.0: USB hub found [ 3.193343] hub 1-4.2:1.0: 7 ports detected [ 3.272084] usb 1-4.4: new full-speed USB device number 4 using xhci_hcd [ 3.342291] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.342731] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.343029] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.345322] systemd[1]: Created slice System Slice. [ 3.348095] systemd[1]: Mounting Huge Pages File System... [ 3.348407] systemd[1]: Reached target Remote File Systems. [ 3.348849] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.377765] usb 1-4.4: New USB device found, idVendor=14e1, idProduct=6000 [ 3.377784] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.377795] usb 1-4.4: Product: PenMount USB [ 3.377803] usb 1-4.4: Manufacturer: DIALOGUE INC [ 3.417610] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 3.445042] f71882fg: Found f81866a chip at 0xa20, revision 32 [ 3.445742] f71882fg f71882fg.2592: Fan: 1 is in duty-cycle mode [ 3.445949] f71882fg f71882fg.2592: Fan: 2 is in duty-cycle mode [ 3.446452] f71882fg f71882fg.2592: Fan: 3 is in duty-cycle mode [ 3.446673] f71882fg f71882fg.2592: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 3.480069] usb 1-4.2.3: new low-speed USB device number 5 using xhci_hcd [ 3.519486] loop: module loaded [ 3.556836] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.586021] usb 1-4.2.3: New USB device found, idVendor=046d, idProduct=c31c [ 3.586039] usb 1-4.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.586050] usb 1-4.2.3: Product: USB Keyboard [ 3.586058] usb 1-4.2.3: Manufacturer: Logitech [ 3.679107] usb 1-4.2.4: new full-speed USB device number 6 using xhci_hcd [ 3.694254] hidraw: raw HID events driver (C) Jiri Kosina [ 3.701767] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 3.732653] systemd-journald[151]: Received request to flush runtime journal from PID 1 [ 3.746288] usbcore: registered new interface driver usbhid [ 3.746303] usbhid: USB HID core driver [ 3.782573] usb 1-4.2.4: New USB device found, idVendor=096e, idProduct=0807 [ 3.782592] usb 1-4.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.782604] usb 1-4.2.4: Product: USB Token [ 3.782612] usb 1-4.2.4: Manufacturer: FS [ 3.797177] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.797247] ACPI: Power Button [PWRB] [ 3.797425] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.797457] ACPI: Sleep Button [SLPB] [ 3.797734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.798092] ACPI: Power Button [PWRF] [ 3.945222] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.974416] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 3.977174] EFI Variables Facility v0.08 2004-May-17 [ 4.062560] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.062702] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.062816] intel_soc_dts_thermal: request_threaded_irq ret -22 [ 4.115806] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4.217591] [drm:i915_driver_load [i915]] No PCH found. [ 4.217671] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00 [ 4.217897] [drm:intel_device_info_dump [i915]] i915 device info: platform=VALLEYVIEW gen=7 pciid=0x0f31 rev=0x11 [ 4.217973] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no [ 4.218046] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: yes [ 4.218119] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no [ 4.218192] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no [ 4.218265] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes [ 4.218337] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no [ 4.218410] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: no [ 4.218483] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: no [ 4.218555] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: no [ 4.218628] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: no [ 4.218701] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: no [ 4.218774] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes [ 4.218846] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no [ 4.218919] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: yes [ 4.218992] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no [ 4.219064] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no [ 4.219137] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes [ 4.219210] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no [ 4.219282] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no [ 4.219355] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no [ 4.219428] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_preemption: no [ 4.219500] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no [ 4.219573] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no [ 4.219646] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes [ 4.219719] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes [ 4.219791] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no [ 4.219864] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: no [ 4.219936] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes [ 4.220009] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: yes [ 4.220124] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no [ 4.220197] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no [ 4.220271] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no [ 4.220351] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no [ 4.220424] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no [ 4.220496] [drm:intel_device_info_dump [i915]] i915 device info: has_ipc: no [ 4.220614] [drm:check_for_unclaimed_mmio [i915]] GTFIFODBG = 0x0810 [ 4.220912] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000 [ 4.220985] [drm:intel_device_info_runtime_init [i915]] slice total: 0 [ 4.221061] [drm:intel_device_info_runtime_init [i915]] subslice total: 0 [ 4.221134] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000 [ 4.221207] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0 [ 4.221284] [drm:intel_device_info_runtime_init [i915]] EU total: 0 [ 4.221356] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0 [ 4.221430] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n [ 4.221505] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n [ 4.221578] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n [ 4.221652] [drm:intel_device_info_runtime_init [i915]] CS timestamp frequency: 12500 kHz [ 4.221728] [drm:i915_driver_load [i915]] ppgtt mode: 1 [ 4.221800] [drm:i915_driver_load [i915]] use GPU semaphores? yes [ 4.221825] [drm] Memory usable by graphics device = 2048M [ 4.221917] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 4.221994] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M [ 4.222001] [drm] Replacing VGA console driver [ 4.222134] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 65536K [ 4.222231] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7987e018 [ 4.222341] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 4.222421] [drm:intel_opregion_setup [i915]] ASLE supported [ 4.222505] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 4.222603] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.222615] [drm] Driver supports precise vblank timestamp query. [ 4.222712] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz [ 4.222806] [drm:intel_bios_init [i915]] VBT signature "$VBT VALLEYVIEW ", BDB version 155 [ 4.222893] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 4.222975] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 4.223059] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19) [ 4.223143] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 4.223225] [drm:intel_bios_init [i915]] DRRS supported mode is static [ 4.223310] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 4.223335] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 4.223417] [drm:intel_bios_init [i915]] VBT initial LVDS value 42000300 [ 4.223502] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 0, controller 0 [ 4.223587] [drm:intel_bios_init [i915]] DRRS State Enabled:0 [ 4.223670] [drm:intel_bios_init [i915]] No PSR BDB found. [ 4.223752] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT [ 4.223861] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 4.223961] [drm:intel_update_rawclk [i915]] rawclk rate: 200000 kHz [ 4.224050] [drm:intel_power_well_enable [i915]] enabling always-on [ 4.224173] [drm:intel_power_well_enable [i915]] enabling display [ 4.224605] pstore: using zlib compression [ 4.228460] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01 [ 4.228540] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23 [ 4.228618] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01 [ 4.228695] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23 [ 4.228772] [drm:intel_power_well_enable [i915]] enabling dpio-common [ 4.233148] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 [ 4.233234] [drm:intel_modeset_init [i915]] 2 display pipes available. [ 4.233411] [drm:intel_modeset_init [i915]] CZ clock rate: 266667 kHz [ 4.233524] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 320000 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 2 [ 4.233608] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz [ 4.233690] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 360000 kHz [ 4.233702] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.234126] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40018 [ 4.234218] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B [ 4.234306] [drm:intel_dp_init_connector [i915]] using AUX B for port B (platform default) [ 4.234400] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B [ 4.234411] [drm] forcing HDMI-A-1 connector on [ 4.234440] [drm:drm_connector_init [drm]] cmdline mode for connector HDMI-A-1 1600x900@60Hz [ 4.234521] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default) [ 4.234619] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port C [ 4.234704] [drm:intel_dp_init_connector [i915]] using AUX C for port C (platform default) [ 4.234793] [drm:intel_dp_pps_init [i915]] initial power sequencer for port C: pipe B [ 4.234881] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 4.234962] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 4.235043] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 4.235126] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 4.235210] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06 [ 4.235296] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on [ 4.235380] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b [ 4.242409] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.245221] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.247961] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.250724] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.251962] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/0003:046D:C31C.0002/input/input4 [ 4.253328] input: DIALOGUE INC PenMount USB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:14E1:6000.0001/input/input5 [ 4.253475] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.256283] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.258585] pstore: Registered efi as persistent store backend [ 4.259227] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.261909] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.264565] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.267229] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.269876] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.272556] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.275202] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.277823] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.280494] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.283110] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.285758] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.288372] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.290953] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.293582] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.296240] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.298954] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.301689] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.304318] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.306955] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.308395] hid-generic 0003:046D:C31C.0002: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input0 [ 4.308521] hid-penmount 0003:14E1:6000.0001: input,hidraw1: USB HID v1.01 Mouse [DIALOGUE INC PenMount USB] on usb-0000:00:14.0-4.4/input0 [ 4.309347] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.1/0003:046D:C31C.0003/input/input6 [ 4.309572] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.311048] iTCO_vendor_support: vendor-support=0 [ 4.311954] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.312114] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 4.312226] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.312466] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.314919] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.317619] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.320303] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.322978] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.325730] [drm:intel_dp_aux_ch [i915]] dp_aux_ch timeout status 0x71450064 [ 4.325777] [drm:drm_dp_dpcd_access [drm_kms_helper]] Too many retries, giving up. First error: -110 [ 4.325780] [drm] failed to retrieve link info, disabling eDP [ 4.325885] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off [ 4.325969] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003 [ 4.326082] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 4.326170] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (platform default) [ 4.326251] [drm:intel_dsi_init [i915]] [ 4.326361] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 4.326444] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe A] hw state readout: enabled [ 4.326539] [drm:intel_set_plane_visible [i915]] pipe B active planes 0x1 [ 4.326622] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:52:pipe B] hw state readout: enabled [ 4.326709] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:54:CRT] hw state readout: enabled, pipe A [ 4.326795] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:55:DP B] hw state readout: disabled, pipe A [ 4.326880] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:59:HDMI B] hw state readout: disabled, pipe A [ 4.326965] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:HDMI C] hw state readout: disabled, pipe A [ 4.327051] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:VGA-1] hw state readout: enabled [ 4.327136] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:56:DP-1] hw state readout: disabled [ 4.327232] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:60:HDMI-A-1] hw state readout: disabled [ 4.327316] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:HDMI-A-2] hw state readout: disabled [ 4.327432] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][setup_hw_state] [ 4.327516] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2) [ 4.327599] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 4.327681] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.327763] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.327786] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.327868] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.327888] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.327973] [drm:intel_dump_pipe_config [i915]] crtc timings: 40000 800 840 968 1056 600 601 605 628, type: 0x40 flags: 0x5 [ 4.328056] [drm:intel_dump_pipe_config [i915]] port clock: 40000, pipe src size: 800x600, pixel rate 40000 [ 4.328193] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.328276] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.328359] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 4.328441] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.328537] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] disabled, scaler_id = 0 [ 4.328621] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0 [ 4.328710] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0 [ 4.328794] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 4.328904] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 4.329011] [drm:intel_disable_pipe [i915]] disabling pipe B [ 4.333184] [drm:intel_crtc_disable_noatomic [i915]] [CRTC:52:pipe B] hw state adjusted, was enabled, now disabled [ 4.333278] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][setup_hw_state] [ 4.333361] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 4.333488] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 18, dithering: 0 [ 4.333571] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.333653] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.333675] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.333756] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.333776] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"800x600" 150 162000 800 936 1072 1344 600 687 693 806 0x40 0x0 [ 4.333861] [drm:intel_dump_pipe_config [i915]] crtc timings: 162000 800 936 1072 1344 600 687 693 806, type: 0x40 flags: 0x0 [ 4.333945] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 800x600, pixel rate 162000 [ 4.334028] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.334110] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.334193] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 4.334274] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.334359] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = 0 [ 4.334443] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0 [ 4.334527] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0 [ 4.334610] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0 [ 4.334696] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15 [ 4.334772] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15 [ 4.334846] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0 [ 4.334932] [drm:intel_power_well_disable [i915]] disabling dpio-tx-c-23 [ 4.336147] [drm:intel_power_well_disable [i915]] disabling dpio-tx-c-01 [ 4.338285] [drm:intel_power_well_disable [i915]] disabling dpio-tx-b-23 [ 4.340145] [drm:intel_power_well_disable [i915]] disabling dpio-tx-b-01 [ 4.342347] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane A/0 with fb: size=800x600@32, offset=0, pitch 3200, size 0x1d4c00 [ 4.342431] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1d5000 [ 4.342545] [drm:intel_alloc_initial_plane_obj.isra.120 [i915]] initial plane fb obj ffff880072c97c40 [ 4.342635] [drm:intel_set_plane_visible [i915]] pipe A active planes 0x1 [ 4.342718] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null) [ 4.342799] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch (null) [ 4.345675] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1d6000, 80000000] [ 4.350384] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00 [ 4.350469] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000 [ 4.350563] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 4.356171] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0x001d6000 [ 4.356274] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdfd000 [ 4.360229] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0x001f7000 [ 4.364266] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0x00218000 [ 4.364368] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000 [ 4.364448] [drm:intel_init_gt_powersave [i915]] PCBR: 0x7eefa001 [ 4.364528] [drm:vlv_init_gpll_ref_freq [i915]] GPLL reference freq: 22222 kHz [ 4.364606] [drm:intel_init_gt_powersave [i915]] DDR speed: 1066 MHz [ 4.364683] [drm:intel_init_gt_powersave [i915]] max GPU freq: 533 MHz (207) [ 4.364763] [drm:intel_init_gt_powersave [i915]] RPe GPU freq: 533 MHz (207) [ 4.364841] [drm:intel_init_gt_powersave [i915]] RP1(Guar Freq) GPU freq: 533 MHz (207) [ 4.364918] [drm:intel_init_gt_powersave [i915]] min GPU freq: 200 MHz (192) [ 4.365027] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0 [ 4.365207] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on [ 4.365292] [drm:intel_enable_gt_powersave [i915]] GPLL enabled? yes [ 4.365367] [drm:intel_enable_gt_powersave [i915]] GPU status: 0x0000cf90 [ 4.365785] [drm:intel_fbdev_init [i915]] found possible fb from plane A [ 4.365867] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 4.365946] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb [ 4.366028] [drm:intel_fbdev_init [i915]] pipe A area: 800x600, bpp: 32, size: 1920000 [ 4.366108] [drm:intel_fbdev_init [i915]] fb big enough for plane A (1921024 >= 1920000) [ 4.366187] [drm:intel_fbdev_init [i915]] pipe B not active, skipping [ 4.366267] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console [ 4.366389] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=0 [ 4.366474] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 4.367079] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 [ 4.367292] [drm] Initialized i915 1.6.0 20171109 for 0000:00:02.0 on minor 0 [ 4.367602] [drm:intel_opregion_register [i915]] 4 outputs detected [ 4.368291] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4.2.3/input1 [ 4.369733] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.371234] acpi device:09: registered as cooling_device3 [ 4.371407] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 4.381715] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 4.381797] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 4.381814] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:53:VGA-1] status updated from unknown to connected [ 4.381897] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 4.381974] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01 [ 4.384147] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23 [ 4.386298] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01 [ 4.388162] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23 [ 4.390305] [drm:intel_power_well_disable [i915]] disabling dpio-tx-c-23 [ 4.392152] [drm:intel_power_well_disable [i915]] disabling dpio-tx-c-01 [ 4.394304] [drm:intel_power_well_disable [i915]] disabling dpio-tx-b-23 [ 4.396156] [drm:intel_power_well_disable [i915]] disabling dpio-tx-b-01 [ 4.398221] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:56:DP-1] status updated from unknown to disconnected [ 4.398319] [drm:intel_hdmi_detect [i915]] [CONNECTOR:60:HDMI-A-1] [ 4.400154] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 4.400235] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.402376] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 4.402416] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 4.404166] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.404247] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.406381] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.406400] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.406413] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] status updated from unknown to disconnected [ 4.406495] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2] [ 4.408153] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.408235] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.410396] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.410421] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 4.412152] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.412233] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.414367] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.414386] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.414399] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] status updated from unknown to disconnected [ 4.414555] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.414619] [drm:drm_setup_crtcs [drm_kms_helper]] [ 4.414637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] [ 4.414735] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1 [ 4.414823] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 4.430179] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 4.430261] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 4.468092] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.468379] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes : [ 4.468400] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.468420] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.468439] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.468458] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 4.468477] [drm:drm_mode_debug_printmodeline [drm]] Modeline 69:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.468496] [drm:drm_mode_debug_printmodeline [drm]] Modeline 68:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 4.468515] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 4.468534] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.468553] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 4.468572] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.468591] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.468610] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.468629] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.468648] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.468659] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] [ 4.468754] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 4.468832] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01 [ 4.470969] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23 [ 4.472150] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01 [ 4.474290] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23 [ 4.476152] [drm:intel_power_well_disable [i915]] disabling dpio-tx-c-23 [ 4.478453] [drm:intel_power_well_disable [i915]] disabling dpio-tx-c-01 [ 4.480164] [drm:intel_power_well_disable [i915]] disabling dpio-tx-b-23 [ 4.482297] [drm:intel_power_well_disable [i915]] disabling dpio-tx-b-01 [ 4.484086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected [ 4.484102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] [ 4.484197] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1] [ 4.486337] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 4.486418] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.488156] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 4.488181] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 4.490317] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.490398] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.492152] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.492170] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.492183] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] status updated from disconnected to connected [ 4.492405] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes : [ 4.492429] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6 [ 4.492449] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.492468] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.492487] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 4.492506] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 4.492525] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.492536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] [ 4.492625] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2] [ 4.494762] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.494842] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.496158] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.496183] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 4.498319] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.498400] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.500155] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.500174] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.500187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected [ 4.500199] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes [ 4.500207] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no [ 4.500214] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes [ 4.500222] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no [ 4.500310] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 4.500321] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53 [ 4.500329] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0 [ 4.500336] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.500344] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60 [ 4.500351] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.500359] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 4.500377] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0) [ 4.500391] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0) [ 4.500477] [drm:intelfb_create [i915]] BIOS fb too small (800x600), we require (1600x900), releasing it [ 4.500557] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 4.503420] [drm:intelfb_create [i915]] allocated 1600x900 fb: 0x00240000 [ 4.503607] fbcon: inteldrmfb (fb0) is primary device [ 4.503898] [drm:intel_atomic_check [i915]] [CONNECTOR:53:VGA-1] checking for sink bpp constrains [ 4.503981] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24 [ 4.504067] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0 [ 4.504210] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe A][modeset] [ 4.504293] [drm:intel_dump_pipe_config [i915]] output_types: ANALOG (0x2) [ 4.504375] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 [ 4.504457] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.504538] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.504560] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.504641] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.504661] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.504745] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1600 1624 1704 1800 900 901 904 1000, type: 0x48 flags: 0x5 [ 4.504827] [drm:intel_dump_pipe_config [i915]] port clock: 108000, pipe src size: 1600x900, pixel rate 108000 [ 4.504910] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.504992] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.505074] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 4.505155] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.505241] [drm:intel_dump_pipe_config [i915]] [PLANE:27:primary A] FB:65, fb = 800x600 format = XR24 little-endian (0x34325258) [ 4.505323] [drm:intel_dump_pipe_config [i915]] [PLANE:30:sprite A] disabled, scaler_id = 0 [ 4.505406] [drm:intel_dump_pipe_config [i915]] [PLANE:33:sprite B] disabled, scaler_id = 0 [ 4.505488] [drm:intel_dump_pipe_config [i915]] [PLANE:36:cursor A] disabled, scaler_id = 0 [ 4.505684] [drm:intel_atomic_check [i915]] [CONNECTOR:60:HDMI-A-1] checking for sink bpp constrains [ 4.505767] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24 [ 4.505867] [drm:intel_hdmi_compute_config [i915]] picking bpc to 8 for HDMI output [ 4.505946] [drm:intel_hdmi_compute_config [i915]] forcing pipe bpp to 24 for HDMI [ 4.506029] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 24, dithering: 0 [ 4.506114] [drm:intel_dump_pipe_config [i915]] [CRTC:52:pipe B][modeset] [ 4.506196] [drm:intel_dump_pipe_config [i915]] output_types: HDMI (0x40) [ 4.506279] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 [ 4.506360] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.506441] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.506463] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6 [ 4.506544] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.506563] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6 [ 4.506647] [drm:intel_dump_pipe_config [i915]] crtc timings: 118963 1600 1696 1864 2128 900 901 904 932, type: 0x20 flags: 0x6 [ 4.506730] [drm:intel_dump_pipe_config [i915]] port clock: 118963, pipe src size: 1600x900, pixel rate 118963 [ 4.506813] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 4.506895] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.506977] [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0xf0006000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0 [ 4.507058] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.507142] [drm:intel_dump_pipe_config [i915]] [PLANE:40:primary B] disabled, scaler_id = 0 [ 4.507224] [drm:intel_dump_pipe_config [i915]] [PLANE:43:sprite C] disabled, scaler_id = 0 [ 4.507307] [drm:intel_dump_pipe_config [i915]] [PLANE:46:sprite D] disabled, scaler_id = 0 [ 4.507389] [drm:intel_dump_pipe_config [i915]] [PLANE:49:cursor B] disabled, scaler_id = 0 [ 4.507476] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 266667 kHz, actual 266667 kHz [ 4.507558] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 [ 4.507697] [drm:vlv_compute_pipe_wm [i915]] primary A watermarks: PM2=100, PM5=0, DDR DVFS=0 [ 4.507834] [drm:vlv_compute_pipe_wm [i915]] primary B watermarks: PM2=100, PM5=0, DDR DVFS=0 [ 4.508816] [drm:_intel_set_memory_cxsr [i915]] memory self-refresh is disabled (was disabled) [ 4.508921] [drm:intel_disable_pipe [i915]] disabling pipe A [ 4.514182] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01 [ 4.516141] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23 [ 4.518275] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01 [ 4.520149] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23 [ 4.522302] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 266667 kHz, VCO 1600000 kHz, ref 0 kHz, voltage level 1 [ 4.524183] [drm:intel_atomic_commit_tail [i915]] [ENCODER:54:CRT] [ 4.524274] [drm:intel_atomic_commit_tail [i915]] [ENCODER:55:DP B] [ 4.524357] [drm:intel_atomic_commit_tail [i915]] [ENCODER:59:HDMI B] [ 4.524439] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:HDMI C] [ 4.524773] [drm:intel_enable_pipe [i915]] enabling pipe A [ 4.525200] [drm:intel_enable_pipe [i915]] enabling pipe B [ 4.566988] [drm:intel_check_cpu_fifo_underruns [i915]] *ERROR* pipe B underrun [ 4.567076] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:53:VGA-1] [ 4.567170] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe A] [ 4.567278] [drm:verify_connector_state.isra.112 [i915]] [CONNECTOR:60:HDMI-A-1] [ 4.567363] [drm:intel_atomic_commit_tail [i915]] [CRTC:52:pipe B] [ 4.567423] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] [ 4.567431] [drm:drm_setup_crtcs [drm_kms_helper]] [ 4.567444] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] [ 4.567532] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1 [ 4.567617] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 4.575841] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 4.575922] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 4.608551] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun [ 4.614132] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.614410] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"1280x1024" 0 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.614427] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y [ 4.614447] [drm:drm_mode_debug_printmodeline [drm]] Modeline 70:"1280x1024" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 4.614463] [drm:drm_mode_prune_invalid [drm]] Not using 1280x1024 mode: VIRTUAL_Y [ 4.614480] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes : [ 4.614499] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 4.614518] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 4.614536] [drm:drm_mode_debug_printmodeline [drm]] Modeline 69:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 4.614555] [drm:drm_mode_debug_printmodeline [drm]] Modeline 68:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 4.614574] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 4.614592] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.614611] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 4.614630] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 4.614649] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.614667] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 4.614686] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.614704] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4.614715] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] [ 4.614812] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 4.614828] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected [ 4.614838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] [ 4.614919] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1] [ 4.616167] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 4.616246] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.618391] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 4.618415] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 4.620149] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.620229] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 4.622378] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 4.622397] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.622622] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes : [ 4.622646] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6 [ 4.622665] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4.622684] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4.622703] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 4.622721] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 4.622740] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 4.622750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] [ 4.622839] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2] [ 4.624171] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.624251] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.626378] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.626402] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 4.628130] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.628208] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.630491] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.630509] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.630522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected [ 4.630534] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes [ 4.630542] [drm:drm_setup_crtcs [drm_kms_helper]] connector 56 enabled? no [ 4.630551] [drm:drm_setup_crtcs [drm_kms_helper]] connector 60 enabled? yes [ 4.630558] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no [ 4.630655] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 4.630668] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 53 [ 4.630676] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 53 0 [ 4.630684] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.630692] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 60 [ 4.630700] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1600x900 [ 4.630708] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1600x900 config [ 4.630730] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 39 (0,0) [ 4.630743] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1600x900 set on crtc 52 (0,0) [ 4.650449] Console: switching to colour frame buffer device 200x56 [ 4.711948] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.786431] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.786436] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.786439] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.786442] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.786445] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.786448] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 4.786452] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 4.839619] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 4.839795] snd_hda_codec_generic hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.839917] snd_hda_codec_generic hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.840062] snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0 [ 4.840165] snd_hda_codec_generic hdaudioC0D2: dig-out=0x4/0x0 [ 4.840260] snd_hda_codec_generic hdaudioC0D2: inputs: [ 4.845961] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.196364] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 5.196388] br0: port 1(enp2s0) entered blocking state [ 5.196390] br0: port 1(enp2s0) entered disabled state [ 5.196525] device enp2s0 entered promiscuous mode [ 5.197455] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.278782] IPv6: ADDRCONF(NETDEV_UP): veth0a: link is not ready [ 5.287267] br0: port 2(veth0a) entered blocking state [ 5.290413] br0: port 2(veth0a) entered disabled state [ 5.299625] device veth0a entered promiscuous mode [ 5.325557] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 5.516970] IPv6: ADDRCONF(NETDEV_CHANGE): veth0a: link becomes ready [ 5.520100] br0: port 2(veth0a) entered blocking state [ 5.523126] br0: port 2(veth0a) entered forwarding state [ 5.530478] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 5.894743] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 6.043997] [drm:drm_mode_addfb2 [drm]] [FB:70] [ 6.045102] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb [ 6.045126] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 6.045176] [drm:intel_framebuffer_init [i915]] Unsupported tiling 0x100000000000002! [ 6.045194] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer [ 6.045256] [drm:drm_mode_addfb2 [drm]] [FB:70] [ 6.257741] IPv6: ADDRCONF(NETDEV_UP): veth1a: link is not ready [ 6.270120] [drm:drm_mode_addfb2 [drm]] [FB:70] [ 6.281093] IPv6: ADDRCONF(NETDEV_CHANGE): veth1a: link becomes ready [ 6.472656] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 6.472987] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 6.932544] [drm:drm_mode_addfb2 [drm]] [FB:91] [ 6.932687] [drm:drm_mode_setcrtc [drm]] [CRTC:39:pipe A] [ 6.932717] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:53:VGA-1] [ 6.942605] [drm:drm_mode_setcrtc [drm]] [CRTC:52:pipe B] [ 6.942647] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:60:HDMI-A-1] [ 7.108343] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0) [ 7.189647] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=63, PM5=0, DDR DVFS=0 [ 7.189988] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=63, PM5=0, DDR DVFS=0 [ 7.910853] systemd-journald[18]: Received request to flush runtime journal from PID 1 [ 7.996602] [drm:vlv_compute_pipe_wm [i915]] cursor A watermarks: PM2=0, PM5=0, DDR DVFS=0 [ 8.009672] [drm:vlv_compute_pipe_wm [i915]] cursor B watermarks: PM2=0, PM5=0, DDR DVFS=0 [ 8.057901] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] [ 8.057977] [drm:intel_dp_detect [i915]] [CONNECTOR:56:DP-1] [ 8.057994] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:56:DP-1] disconnected [ 8.058028] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] [ 8.058070] [drm:intel_hdmi_force [i915]] [CONNECTOR:60:HDMI-A-1] [ 8.061859] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 8.061899] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 8.064864] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) [ 8.064890] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb [ 8.066998] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 8.067037] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry [ 8.069990] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) [ 8.070010] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 8.070232] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:60:HDMI-A-1] probed modes : [ 8.070256] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1600x900" 60 118963 1600 1696 1864 2128 900 901 904 932 0x20 0x6 [ 8.070276] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 8.070295] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 8.070314] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 8.070333] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 8.070352] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 8.070455] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] [ 8.070502] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-2] [ 8.073699] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 8.073739] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 8.075824] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 8.075849] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 8.077959] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 8.077998] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 8.080680] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 8.080702] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 8.080714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-2] disconnected [ 8.080759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] [ 8.080804] [drm:intel_crt_detect [i915]] [CONNECTOR:53:VGA-1] force=1 [ 8.080849] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018 [ 8.094438] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0x83f40018, result 1 [ 8.094480] [drm:intel_crt_detect [i915]] CRT detected via hotplug [ 8.132133] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 8.132459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:VGA-1] probed modes : [ 8.132482] [drm:drm_mode_debug_printmodeline [drm]] Modeline 67:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x48 0x5 [ 8.132502] [drm:drm_mode_debug_printmodeline [drm]] Modeline 100:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 8.132521] [drm:drm_mode_debug_printmodeline [drm]] Modeline 95:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 8.132541] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 8.132560] [drm:drm_mode_debug_printmodeline [drm]] Modeline 69:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [ 8.132579] [drm:drm_mode_debug_printmodeline [drm]] Modeline 68:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 8.132598] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 8.132617] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 8.132636] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 8.132655] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 8.132674] [drm:drm_mode_debug_printmodeline [drm]] Modeline 71:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 8.132693] [drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 8.132712] [drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [ 8.132731] [drm:drm_mode_debug_printmodeline [drm]] Modeline 74:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 8.140371] [drm:drm_mode_addfb2 [drm]] [FB:64] [ 8.290931] [drm:drm_mode_addfb2 [drm]] [FB:90] [ 8.972189] [drm:drm_mode_addfb2 [drm]] [FB:94] [ 23.628394] random: crng init done