This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.4.99.2 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.23.11 i686 Current Operating System: Linux slax 2.6.23.12 #5 SMP Wed Jan 2 02:19:46 GMT 2008 i686 Build Date: 30 December 2007 10:19:39AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/usr/X11R7/var/log/Xorg.0.log", Time: Tue Jan 8 21:46:49 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/truetype"). (==) Including the default font path /usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/TTF/,/usr/X11R7/lib/X11/fonts/OTF,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/100dpi/,/usr/X11R7/lib/X11/fonts/75dpi/. (**) FontPath set to: /usr/X11R7/lib/X11/fonts/cp1251/misc, /usr/X11R7/lib/X11/fonts/misc, /usr/X11R7/lib/X11/fonts/cp1251/75dpi, /usr/X11R7/lib/X11/fonts/75dpi, /usr/share/fonts/ttf/western, /usr/share/fonts/ttf/decoratives, /usr/X11R7/lib/X11/fonts/misc/, /usr/X11R7/lib/X11/fonts/TTF/, /usr/X11R7/lib/X11/fonts/OTF, /usr/X11R7/lib/X11/fonts/Type1/, /usr/X11R7/lib/X11/fonts/100dpi/, /usr/X11R7/lib/X11/fonts/75dpi/ (**) ModulePath set to "/usr/X11R7/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81ba2a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 4.0 X.Org XInput driver : 2.0 X.Org Server Extension : 1.0 X.Org Font Renderer : 0.5 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@1:0:0) unknown vendor (0x10de) unknown chipset (0x0110) rev 178, Mem @ 0xde000000/0, 0xd0000000/0, BIOS @ 0x????????/65536 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded by default. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) LoadModule: "vbe" (II) Loading /usr/X11R7/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 4.0 (II) LoadModule: "dbe" (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.0 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.0 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R7/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.0 (II) Loading extension RECORD (II) LoadModule: "xtrap" (II) Loading /usr/X11R7/lib/xorg/modules/extensions//libxtrap.so (II) Module xtrap: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.0 (II) Loading extension DEC-XTRAP (II) LoadModule: "extmod" (II) Reloading /usr/X11R7/lib/xorg/modules/extensions//libextmod.so (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/X11R7/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.99.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "nouveau" (II) Loading /usr/X11R7/lib/xorg/modules/drivers//nouveau_drv.so (II) Module nouveau: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.2.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.0 (II) LoadModule: "mouse" (II) Loading /usr/X11R7/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/X11R7/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) NOUVEAU driver Date: Tue Jan 8 19:07:50 2008 +0100 (II) NOUVEAU driver for NVIDIA chipset families : RIVA TNT (NV04) RIVA TNT2 (NV05) GeForce 256 (NV10) GeForce 2 (NV11, NV15) GeForce 4MX (NV17, NV18) GeForce 3 (NV20) GeForce 4Ti (NV25, NV28) GeForce FX (NV3x) GeForce 6 (NV4x) GeForce 7 (G7x) GeForce 8 (G8x) (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R7/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.0 (II) NOUVEAU(0): Initializing int10 (II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000 (--) NOUVEAU(0): Chipset: "NVIDIA NV11" (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 (==) NOUVEAU(0): RGB weight 888 (==) NOUVEAU(0): Default visual is TrueColor (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R7/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.0 (**) NOUVEAU(0): Option "Randr12" "1" (==) NOUVEAU(0): Randr1.2 support enabled (==) NOUVEAU(0): Using HW cursor (--) NOUVEAU(0): Linear framebuffer at 0xD0000000 (--) NOUVEAU(0): MMIO registers at 0xDE000000 (II) Loading sub module "dri" (II) LoadModule: "dri" (II) Reloading /usr/X11R7/lib/xorg/modules/extensions//libdri.so (II) NOUVEAU(0): Loaded DRI module drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) NOUVEAU(0): [dri] Found DRI library version 1.3.0 and kernel module version 0.0.10 (II) NOUVEAU(0): Attempting to locate BIOS image in PROM (II) NOUVEAU(0): ... appears to be valid (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Read: Reg: 0x00100200, Data: 0x08B10110 (II) NOUVEAU(0): Write: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x44, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x1F, Head: 0x00, Data: 0x57 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x11, Head: 0x00, Data: 0x8E (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x11, Head: 0x00, Data: 0x0E (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x44, Head: 0x00, Data: 0x03 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x1F, Head: 0x01, Data: 0x57 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x11, Head: 0x01, Data: 0xA0 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x11, Head: 0x01, Data: 0x20 (II) NOUVEAU(0): BMP BIOS found (II) NOUVEAU(0): BMP version 5.16 (II) NOUVEAU(0): Bios version 03.11.00.08 (II) NOUVEAU(0): 0x0780: Parsing init table 0 (II) NOUVEAU(0): 0x0780: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x0780: [ (0x65) - INIT_RESET ] (II) NOUVEAU(0): Read: Reg: 0x0000184C, Data: 0x1F000104 (II) NOUVEAU(0): Write: Reg: 0x0000184C, Data: 0x00000000 (II) NOUVEAU(0): Write: Reg: 0x00000200, Data: 0x01000000 (II) NOUVEAU(0): Write: Reg: 0x00000200, Data: 0x01110110 (II) NOUVEAU(0): Write: Reg: 0x0000184C, Data: 0x1F000104 (II) NOUVEAU(0): Read: Reg: 0x00001850, Data: 0x00000001 (II) NOUVEAU(0): Write: Reg: 0x00001850, Data: 0x00000000 (II) NOUVEAU(0): 0x078D: [ (0x6E) - INIT_NV_REG ] (II) NOUVEAU(0): 0x078D: Reg: 0x00101000, Mask: 0xFFFFFFFF, Data: 0x80000000 (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Write: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): 0x079A: Init table command not found: 0x68 (II) NOUVEAU(0): 0x0E0A: Parsing init table 1 (II) NOUVEAU(0): 0x0E0A: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x0E0A: [ (0x75) - INIT_CONDITION ] (II) NOUVEAU(0): 0x0E0A: Cond: 0x00, Reg: 0x00101000, Mask: 0x00000040, Cmpval: 0x00000040 (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): 0x0E0A: Checking if 0x00000040 equals 0x00000040 (II) NOUVEAU(0): 0x0E0A: CONDITION FULFILLED - CONTINUING TO EXECUTE (II) NOUVEAU(0): 0x0E0C: [ (0x62) - INIT_ZM_INDEX_IO ] (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x01 (II) NOUVEAU(0): 0x0E11: [ (0x38) - INIT_NOT ] (II) NOUVEAU(0): 0x0E11: ------ SKIPPING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x0E12: [ (0x62) - INIT_ZM_INDEX_IO ] (II) NOUVEAU(0): 0x0E17: [ (0x72) - INIT_RESUME ] (II) NOUVEAU(0): 0x0E17: ---- EXECUTING FOLLOWING COMMANDS ---- (II) NOUVEAU(0): 0x0E18: [ (0x37) - INIT_COPY ] (II) NOUVEAU(0): 0x0E18: Reg: 0x00101000, Shift: 0xFE, SrcMask: 0xF0, Port: 0x03D4, Index: 0x3C, Mask: 0x0F (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0E23: [ (0x71) - INIT_DONE ] (II) NOUVEAU(0): 0x079B: Parsing init table 2 (II) NOUVEAU(0): 0x079B: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x079B: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x079B: Port: 0x03D4, Index: 0x35, Mask: 0xFE, Data: 0x01 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x35, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x35, Head: 0x00, Data: 0x01 (II) NOUVEAU(0): 0x07A1: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x07A1: Port: 0x03D4, Index: 0x3C, Mask: 0xF7, Data: 0x08 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x08 (II) NOUVEAU(0): 0x07A7: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x00000200, Data: 0x01010111 (II) NOUVEAU(0): 0x07B0: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x07B0: Port: 0x03C4, Index: 0x01, Mask: 0xFF, Data: 0x20 (II) NOUVEAU(0): Indexed read: Port: 0x03C4, Index: 0x01, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03C4, Index: 0x01, Head: 0x00, Data: 0x20 (II) NOUVEAU(0): 0x07B6: [ (0x79) - INIT_PLL ] (II) NOUVEAU(0): 0x07B6: Reg: 0x00680500, Freq: 100000kHz (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Read: Reg: 0x00680500, Data: 0x0001FB09 (II) NOUVEAU(0): Write: Reg: 0x00680500, Data: 0x0001FB09 (II) NOUVEAU(0): Read: Reg: 0x00680500, Data: 0x0001FB09 (II) NOUVEAU(0): Write: Reg: 0x00680500, Data: 0x0002FB09 (II) NOUVEAU(0): 0x07BD: [ (0x79) - INIT_PLL ] (II) NOUVEAU(0): 0x07BD: Reg: 0x00680504, Freq: 83000kHz (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Read: Reg: 0x00680504, Data: 0x0001B009 (II) NOUVEAU(0): Write: Reg: 0x00680504, Data: 0x0001FF0B (II) NOUVEAU(0): Read: Reg: 0x00680504, Data: 0x0001B009 (II) NOUVEAU(0): Write: Reg: 0x00680504, Data: 0x0002FF0B (II) NOUVEAU(0): 0x07C4: [ (0x6E) - INIT_NV_REG ] (II) NOUVEAU(0): 0x07C4: Reg: 0x000010B0, Mask: 0x0FFFFFFF, Data: 0xC0000000 (II) NOUVEAU(0): Read: Reg: 0x000010B0, Data: 0xC0000000 (II) NOUVEAU(0): Write: Reg: 0x000010B0, Data: 0xC0000000 (II) NOUVEAU(0): 0x07D1: [ (0x6E) - INIT_NV_REG ] (II) NOUVEAU(0): 0x07D1: Reg: 0x000010B4, Mask: 0xFFFFFFFF, Data: 0x00000000 (II) NOUVEAU(0): Read: Reg: 0x000010B4, Data: 0x00000000 (II) NOUVEAU(0): Write: Reg: 0x000010B4, Data: 0x00000000 (II) NOUVEAU(0): 0x07DE: [ (0x6E) - INIT_NV_REG ] (II) NOUVEAU(0): 0x07DE: Reg: 0x000010B8, Mask: 0xFFFFFFFF, Data: 0x00000000 (II) NOUVEAU(0): Read: Reg: 0x000010B8, Data: 0x00000000 (II) NOUVEAU(0): Write: Reg: 0x000010B8, Data: 0x00000000 (II) NOUVEAU(0): 0x07EB: [ (0x6E) - INIT_NV_REG ] (II) NOUVEAU(0): 0x07EB: Reg: 0x000010BC, Mask: 0xFFFFFFF0, Data: 0x00000000 (II) NOUVEAU(0): Read: Reg: 0x000010BC, Data: 0xFF011000 (II) NOUVEAU(0): Write: Reg: 0x000010BC, Data: 0xFF011000 (II) NOUVEAU(0): 0x07F8: [ (0x6E) - INIT_NV_REG ] (II) NOUVEAU(0): 0x07F8: Reg: 0x000010CC, Mask: 0xFFFFFFFF, Data: 0x00000000 (II) NOUVEAU(0): Read: Reg: 0x000010CC, Data: 0x00000000 (II) NOUVEAU(0): Write: Reg: 0x000010CC, Data: 0x00000000 (II) NOUVEAU(0): 0x0805: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x000010D8, Data: 0x88888888 (II) NOUVEAU(0): 0x080E: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x0068050C, Data: 0x00000700 (II) NOUVEAU(0): 0x0817: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x0068050C, Data: 0x00000500 (II) NOUVEAU(0): 0x0820: Init table command not found: 0x67 (II) NOUVEAU(0): 0x0DB1: Parsing init table 3 (II) NOUVEAU(0): 0x0DB1: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x0DB1: [ (0x34) - INIT_IO_RESTRICT_PLL ] (II) NOUVEAU(0): 0x0DB1: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, IO Flag Condition: 0xFFFFFFFF, Count: 0x10, Reg: 0x00680500 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0DB1: Reg: 0x00680500, Config: 0x00, Freq: 200000kHz (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Read: Reg: 0x00680500, Data: 0x0001FB09 (II) NOUVEAU(0): 0x0DDD: [ (0x34) - INIT_IO_RESTRICT_PLL ] (II) NOUVEAU(0): 0x0DDD: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, IO Flag Condition: 0x01, Count: 0x10, Reg: 0x00680504 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0DDD: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, FlagArray: 0x0770, FAMask: 0x01, Cmpval: 0x01 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0DDD: Checking if 0x00 equals 0x01 (II) NOUVEAU(0): 0x0DDD: CONDITION IS NOT FULFILLED. FREQ UNCHANGED (II) NOUVEAU(0): 0x0DDD: Reg: 0x00680504, Config: 0x00, Freq: 140000kHz (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Read: Reg: 0x00680504, Data: 0x0001B009 (II) NOUVEAU(0): 0x0E09: [ (0x71) - INIT_DONE ] (II) NOUVEAU(0): 0x0821: Parsing init table 4 (II) NOUVEAU(0): 0x0821: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x0821: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x00000200, Data: 0x03110111 (II) NOUVEAU(0): 0x082A: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x000010E0, Data: 0x80800080 (II) NOUVEAU(0): 0x0833: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x000010E4, Data: 0x00808000 (II) NOUVEAU(0): 0x083C: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x00001084, Data: 0x00005748 (II) NOUVEAU(0): 0x0845: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x00100080, Data: 0x00020000 (II) NOUVEAU(0): 0x084E: Init table command not found: 0x66 (II) NOUVEAU(0): 0x091E: Parsing init table 5 (II) NOUVEAU(0): 0x091E: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x091E: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x091E: Port: 0x03C4, Index: 0x01, Mask: 0xFF, Data: 0x20 (II) NOUVEAU(0): Indexed read: Port: 0x03C4, Index: 0x01, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03C4, Index: 0x01, Head: 0x00, Data: 0x20 (II) NOUVEAU(0): 0x0924: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0924: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00001080 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0924: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00001080, Data: 0x00000000 (II) NOUVEAU(0): 0x096F: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x096F: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00100210 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x096F: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00100210, Data: 0x00000000 (II) NOUVEAU(0): 0x09BA: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x09BA: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00100200 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x09BA: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00100200, Data: 0x08B10110 (II) NOUVEAU(0): 0x0A05: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0A05: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00100220 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0A05: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00100220, Data: 0x43070A0A (II) NOUVEAU(0): 0x0A50: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0A50: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00100224 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0A50: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00100224, Data: 0x02211150 (II) NOUVEAU(0): 0x0A9B: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0A9B: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00100228 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0A9B: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00100228, Data: 0x000009FF (II) NOUVEAU(0): 0x0AE6: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0AE6: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x000010C4 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0AE6: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x000010C4, Data: 0x11020044 (II) NOUVEAU(0): 0x0B31: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0B31: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x000010C8 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0B31: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x000010C8, Data: 0x033783F0 (II) NOUVEAU(0): 0x0B7C: [ (0x39) - INIT_IO_FLAG_CONDITION ] (II) NOUVEAU(0): 0x0B7C: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, FlagArray: 0x0770, FAMask: 0x01, Cmpval: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0B7C: Checking if 0x00 equals 0x00 (II) NOUVEAU(0): 0x0B7C: CONDITION FULFILLED - CONTINUING TO EXECUTE (II) NOUVEAU(0): 0x0B7E: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0B7E: Macro: 0x00, MacroTableIndex: 0x00, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D4, Data: 0x00000001 (II) NOUVEAU(0): 0x0B80: [ (0x72) - INIT_RESUME ] (II) NOUVEAU(0): 0x0B81: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0B81: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00100218 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0B81: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00100218, Data: 0x00000001 (II) NOUVEAU(0): 0x0BCC: [ (0x39) - INIT_IO_FLAG_CONDITION ] (II) NOUVEAU(0): 0x0BCC: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, FlagArray: 0x0770, FAMask: 0x01, Cmpval: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0BCC: Checking if 0x00 equals 0x00 (II) NOUVEAU(0): 0x0BCC: CONDITION FULFILLED - CONTINUING TO EXECUTE (II) NOUVEAU(0): 0x0BCE: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0BCE: Macro: 0x01, MacroTableIndex: 0x01, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x0010021C, Data: 0x00000001 (II) NOUVEAU(0): 0x0BD0: [ (0x38) - INIT_NOT ] (II) NOUVEAU(0): 0x0BD0: ------ SKIPPING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x0BD1: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0BD3: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0BD5: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0C20: [ (0x72) - INIT_RESUME ] (II) NOUVEAU(0): 0x0C20: ---- EXECUTING FOLLOWING COMMANDS ---- (II) NOUVEAU(0): 0x0C21: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0C21: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x001002C0 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0C21: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x001002C0, Data: 0x00000030 (II) NOUVEAU(0): 0x0C6C: [ (0x39) - INIT_IO_FLAG_CONDITION ] (II) NOUVEAU(0): 0x0C6C: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, FlagArray: 0x0770, FAMask: 0x01, Cmpval: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0C6C: Checking if 0x00 equals 0x00 (II) NOUVEAU(0): 0x0C6C: CONDITION FULFILLED - CONTINUING TO EXECUTE (II) NOUVEAU(0): 0x0C6E: [ (0x33) - INIT_REPEAT ] (II) NOUVEAU(0): 0x0C6E: REPEATING FOLLOWING SEGMENT 8 TIMES (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C70: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C70: Macro: 0x02, MacroTableIndex: 0x02, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D0, Data: 0x00000001 (II) NOUVEAU(0): 0x0C72: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C73: [ (0x33) - INIT_REPEAT ] (II) NOUVEAU(0): 0x0C73: REPEATING FOLLOWING SEGMENT 3 TIMES (II) NOUVEAU(0): 0x0C75: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C75: Macro: 0x00, MacroTableIndex: 0x00, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D4, Data: 0x00000001 (II) NOUVEAU(0): 0x0C77: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C75: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C75: Macro: 0x00, MacroTableIndex: 0x00, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D4, Data: 0x00000001 (II) NOUVEAU(0): 0x0C77: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C75: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C75: Macro: 0x00, MacroTableIndex: 0x00, Count: 0x01 (II) NOUVEAU(0): Write: Reg: 0x001002D4, Data: 0x00000001 (II) NOUVEAU(0): 0x0C77: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C78: [ (0x38) - INIT_NOT ] (II) NOUVEAU(0): 0x0C78: ------ SKIPPING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x0C79: [ (0x33) - INIT_REPEAT ] (II) NOUVEAU(0): 0x0C79: REPEATING FOLLOWING SEGMENT 1 TIMES (II) NOUVEAU(0): 0x0C7B: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C7D: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C7E: [ (0x33) - INIT_REPEAT ] (II) NOUVEAU(0): 0x0C7E: REPEATING FOLLOWING SEGMENT 2 TIMES (II) NOUVEAU(0): 0x0C80: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C82: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C80: [ (0x6F) - INIT_MACRO ] (II) NOUVEAU(0): 0x0C82: [ (0x36) - INIT_END_REPEAT ] (II) NOUVEAU(0): 0x0C83: [ (0x72) - INIT_RESUME ] (II) NOUVEAU(0): 0x0C83: ---- EXECUTING FOLLOWING COMMANDS ---- (II) NOUVEAU(0): 0x0C84: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0C84: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x001002C0 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0C84: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x001002C0, Data: 0x00000030 (II) NOUVEAU(0): 0x0CCF: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0CCF: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00100210 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0CCF: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00100210, Data: 0x80000000 (II) NOUVEAU(0): 0x0D1A: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0D1A: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00000000 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0D1A: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00000000, Data: 0xFFFFFFFF (II) NOUVEAU(0): 0x0D65: [ (0x32) - INIT_IO_RESTRICT_PROG ] (II) NOUVEAU(0): 0x0D65: Port: 0x03D4, Index: 0x3C, Mask: 0xF0, Shift: 0x04, Count: 0x10, Reg: 0x00000000 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0D65: Writing config 00 (II) NOUVEAU(0): Write: Reg: 0x00000000, Data: 0xFFFFFFFF (II) NOUVEAU(0): 0x0DB0: [ (0x71) - INIT_DONE ] (II) NOUVEAU(0): 0x084F: Parsing init table 6 (II) NOUVEAU(0): 0x084F: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x084F: [ (0x63) - INIT_COMPUTE_MEM ] (II) NOUVEAU(0): Write: Reg: 0x00100210, Data: 0x80000000 (II) NOUVEAU(0): Write: Reg: 0x00100200, Data: 0x08B10110 (II) NOUVEAU(0): 0x0850: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x0850: Port: 0x03C4, Index: 0x01, Mask: 0xDF, Data: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03C4, Index: 0x01, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03C4, Index: 0x01, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0856: [ (0x79) - INIT_PLL ] (II) NOUVEAU(0): 0x0856: Reg: 0x00680508, Freq: 36000kHz (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 (II) NOUVEAU(0): Read: Reg: 0x00680508, Data: 0x0003BE0C (II) NOUVEAU(0): Write: Reg: 0x00680508, Data: 0x0003B509 (II) NOUVEAU(0): Read: Reg: 0x00680508, Data: 0x0003BE0C (II) NOUVEAU(0): Write: Reg: 0x00680508, Data: 0x0003B509 (II) NOUVEAU(0): 0x085D: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x00001088, Data: 0x000011F0 (II) NOUVEAU(0): 0x0866: [ (0x7A) - INIT_ZM_REG ] (II) NOUVEAU(0): Write: Reg: 0x0000108C, Data: 0x000000D1 (II) NOUVEAU(0): 0x086F: [ (0x6E) - INIT_NV_REG ] (II) NOUVEAU(0): 0x086F: Reg: 0x00680880, Mask: 0xDFFFFFFF, Data: 0x10000000 (II) NOUVEAU(0): Read: Reg: 0x00680880, Data: 0x11101111 (II) NOUVEAU(0): Write: Reg: 0x00680880, Data: 0x11101111 (II) NOUVEAU(0): 0x087C: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x087C: Port: 0x03D4, Index: 0x38, Mask: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x38, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x38, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0882: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x0882: Port: 0x03D4, Index: 0x1A, Mask: 0x00, Data: 0x3F (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x1A, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x1A, Head: 0x00, Data: 0x3F (II) NOUVEAU(0): 0x0888: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x0888: Port: 0x03D4, Index: 0x28, Mask: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x28, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x28, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x088E: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x088E: Port: 0x03D4, Index: 0x33, Mask: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x33, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x33, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x0894: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x0894: Port: 0x03D4, Index: 0x21, Mask: 0x00, Data: 0xFA (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x21, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x21, Head: 0x00, Data: 0xFA (II) NOUVEAU(0): 0x089A: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x089A: Port: 0x03D4, Index: 0x2B, Mask: 0x00, Data: 0x03 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x2B, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x2B, Head: 0x00, Data: 0x03 (II) NOUVEAU(0): 0x08A0: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x08A0: Port: 0x03D4, Index: 0x2C, Mask: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x2C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x2C, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x08A6: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x08A6: Port: 0x03D4, Index: 0x3A, Mask: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3A, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x3A, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x08AC: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x08AC: Port: 0x03D4, Index: 0x3B, Mask: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x3B, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x3B, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): 0x08B2: [ (0x78) - INIT_INDEX_IO ] (II) NOUVEAU(0): 0x08B2: Port: 0x03D4, Index: 0x52, Mask: 0x00, Data: 0x04 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x52, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x52, Head: 0x00, Data: 0x04 (II) NOUVEAU(0): 0x08B8: [ (0x71) - INIT_DONE ] (II) NOUVEAU(0): 0x08B9: Parsing init table 7 (II) NOUVEAU(0): 0x08B9: ------ EXECUTING FOLLOWING COMMANDS ------ (II) NOUVEAU(0): 0x08B9: [ (0x71) - INIT_DONE ] (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x44, Head: 0x00, Data: 0x00 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x1F, Head: 0x00, Data: 0x99 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x11, Head: 0x00, Data: 0x8E (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x11, Head: 0x00, Data: 0x8E (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x44, Head: 0x00, Data: 0x03 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x1F, Head: 0x01, Data: 0x99 (II) NOUVEAU(0): Indexed read: Port: 0x03D4, Index: 0x11, Head: 0x01, Data: 0xA0 (II) NOUVEAU(0): Indexed write: Port: 0x03D4, Index: 0x11, Head: 0x01, Data: 0xA0 (II) NOUVEAU(0): Display Configuration Block version 1.1 found (II) NOUVEAU(0): No information in BIOS output table; assuming a CRT output exists (II) NOUVEAU(0): Found 1 entries in DCB (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 (--) NOUVEAU(0): DCB entry 0: type: 0, i2c_index: 0, heads: 1, bus: 0, or: 1 (II) NOUVEAU(0): I2C bus "VGA-0" initialized. (II) NOUVEAU(0): Output VGA-0 using monitor section Monitor0 (--) NOUVEAU(0): Adding output VGA-0 nv_analog_output_detect is called (II) NOUVEAU(0): I2C device "VGA-0:ddc2" registered at address 0xA0. nv_output_get_modes is called (II) NOUVEAU(0): EDID vendor "SAM", prod id 4149 (II) NOUVEAU(0): Using hsync ranges from config file (II) NOUVEAU(0): Using vrefresh ranges from config file (II) NOUVEAU(0): Printing DDC gathered Modelines: (II) NOUVEAU(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) NOUVEAU(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) NOUVEAU(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) NOUVEAU(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz) (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) NOUVEAU(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz) (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) NOUVEAU(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) NOUVEAU(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz) (II) NOUVEAU(0): Modeline "1024x768"x74.9 82.00 1024 1088 1192 1360 768 771 775 805 -hsync +vsync (60.3 kHz) (II) NOUVEAU(0): EDID vendor "SAM", prod id 4149 (II) NOUVEAU(0): Output VGA-0 connected (II) NOUVEAU(0): Output VGA-0 using initial mode 1024x768 (--) NOUVEAU(0): VideoRAM: 32768 kBytes (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) (--) NOUVEAU(0): Virtual size is 2048x1024 (pitch 2048) (**) NOUVEAU(0): Driver mode "1024x768": 82.0 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz (II) NOUVEAU(0): Modeline "1024x768"x74.9 82.00 1024 1088 1192 1360 768 771 775 805 -hsync +vsync (60.3 kHz) (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) NOUVEAU(0): Driver mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 87.0 Hz (I) (II) NOUVEAU(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz) (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) NOUVEAU(0): Driver mode "800x600": 56.8 MHz (scaled from 0.0 MHz), 53.7 kHz, 84.9 Hz (II) NOUVEAU(0): Modeline "800x600"x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz) (**) NOUVEAU(0): Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz (II) NOUVEAU(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) NOUVEAU(0): Driver mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) NOUVEAU(0): Driver mode "640x480": 35.0 MHz (scaled from 0.0 MHz), 42.9 kHz, 84.6 Hz (II) NOUVEAU(0): Modeline "640x480"x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) NOUVEAU(0): Driver mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 39.4 kHz, 87.8 Hz (II) NOUVEAU(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz) (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (**) NOUVEAU(0): Display dimensions: (280, 210) mm (**) NOUVEAU(0): DPI set to (185, 123) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R7/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/X11R7/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.4.99.2, module version = 2.4.0 ABI class: X.Org Video Driver, version 4.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables. (II) NOUVEAU(0): [drm] framebuffer handle = 0xd1000000 (II) NOUVEAU(0): [drm] added 1 reserved context for kernel (II) NOUVEAU(0): X context handle = 0x1 (II) NOUVEAU(0): [drm] installed DRM signal handler (II) NOUVEAU(0): Allocated 16MiB VRAM for framebuffer + offscreen pixmaps (II) NOUVEAU(0): AGPGART: 32MiB available (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer (II) NOUVEAU(0): Opened GPU channel 1 NVEnterVT is called nv_crtc_save is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_save is called for CRTC 1 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_output_save is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_analog_output_dpms is called with mode 3 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_lock is called for CRTC 0 nv_output_mode_fixup is called nv_crtc_mode_fixup is called for CRTC 0 nv_output_prepare is called nv_analog_output_dpms is called with mode 3 nv_crtc_prepare is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_mode_set is called for CRTC 0 (WW) NOUVEAU(0): Mode on CRTC 0 (II) NOUVEAU(0): Modeline "1024x768"x74.9 82.00 1024 1088 1192 1360 768 771 775 805 -hsync +vsync (60.3 kHz) pre-Owner: 0x0 post-Owner: 0x0 Mode clock: 82000 Adjusted mode clock: 82000 horizDisplay: 0x7F horizStart: 0x87 horizEnd: 0x94 horizTotal: 0xA5 horizBlankStart: 0x7F horizBlankEnd: 0xA9 vertDisplay: 0x2FF vertStart: 0x302 vertEnd: 0x306 vertTotal: 0x323 vertBlankStart: 0x2FF vertBlankEnd: 0x324 crtc 0 1024 2048 (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 There are 1 CRTC's enabled output 0 debug_0 01101100 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll1_a 0002FC0B writing pllsel 10000700 NVCrtcSetBase: x: 0 y: 0 nv_output_mode_set is called 0: crtc 0 output 0 twocrt 0 twomon 0 output reg: 0x1 0x0 nv_crtc_commit for CRTC 0 nv_crtc_dpms is called for CRTC 0 with mode 0 pre-Owner: 0x0 post-Owner: 0x0 nv_output_commit is called nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 (II) EXA(0): Offscreen pixmap area of 8388608 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (II) UploadToScreen (II) DownloadFromScreen (==) NOUVEAU(0): Backing store disabled (==) NOUVEAU(0): Silken mouse enabled (II) NOUVEAU(0): [DRI] installation complete (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. pre-Owner: 0x0 post-Owner: 0x0 (II) NOUVEAU(0): XV: Composite is enabled, enabling overlay with smart blitter fallback (WW) NOUVEAU(0): Option "AccelMethod" is not used (WW) NOUVEAU(0): Option "AccelDFS" is not used (WW) NOUVEAU(0): Option "AGPMode" is not used (WW) NOUVEAU(0): Option "AgpSize" is not used (WW) NOUVEAU(0): Option "TVOutput" is not used (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) AIGLX: Loaded and initialized /usr/X11R7/lib/dri/nouveau_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) NOUVEAU(0): Setting screen physical size to 267 x 200 nv_xf86crtc_resize is called with 1024x768 resolution (**) Option "Protocol" "IMPS/2" (**) Mouse0: Device: "/dev/mouse" (**) Mouse0: Protocol: "IMPS/2" (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/mouse" (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (**) Mouse0: Sensitivity: 1 (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "250 30" (**) Option "XkbRules" "base" (**) Keyboard0: XkbRules: "base" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us,ru(winkeys)" (**) Keyboard0: XkbLayout: "us,ru(winkeys)" (**) Option "XkbOptions" "grp:ctrl_shift_toggle" (**) Keyboard0: XkbOptions: "grp:ctrl_shift_toggle" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) evaluating device (Keyboard0) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) evaluating device (Mouse0) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) Mouse0: ps2EnableDataReporting: succeeded Could not init font path element /usr/X11R7/lib/X11/fonts/OTF, removing from list! Could not init font path element /usr/X11R7/lib/X11/fonts/Type1/, removing from list! Could not init font path element /usr/X11R7/lib/X11/fonts/100dpi/, removing from list! pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 0 with mode 0 nv_analog_output_dpms is called with mode 0 (II) AIGLX: Suspending AIGLX clients for VT switch NVLeaveVT is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_restore is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll2_a 0003C50E writing vpll1_a 0003BE0C writing pllsel 00000500 nv_crtc_restore is called for CRTC 1 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll2_a 0003C50E writing vpll1_a 0003BE0C writing pllsel 00000500 nv_output_restore is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch NVEnterVT is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_analog_output_dpms is called with mode 3 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_lock is called for CRTC 0 nv_output_mode_fixup is called nv_crtc_mode_fixup is called for CRTC 0 nv_output_prepare is called nv_analog_output_dpms is called with mode 3 nv_crtc_prepare is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_mode_set is called for CRTC 0 (WW) NOUVEAU(0): Mode on CRTC 0 (II) NOUVEAU(0): Modeline "1024x768"x74.9 82.00 1024 1088 1192 1360 768 771 775 805 -hsync +vsync (60.3 kHz) pre-Owner: 0x0 post-Owner: 0x0 Mode clock: 82000 Adjusted mode clock: 82000 horizDisplay: 0x7F horizStart: 0x87 horizEnd: 0x94 horizTotal: 0xA5 horizBlankStart: 0x7F horizBlankEnd: 0xA9 vertDisplay: 0x2FF vertStart: 0x302 vertEnd: 0x306 vertTotal: 0x323 vertBlankStart: 0x2FF vertBlankEnd: 0x324 crtc 0 1024 2048 (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 There are 1 CRTC's enabled output 0 debug_0 01101100 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll1_a 0002FC0B writing pllsel 10000700 NVCrtcSetBase: x: 0 y: 0 nv_output_mode_set is called 0: crtc 0 output 0 twocrt 0 twomon 0 output reg: 0x1 0x0 nv_crtc_commit for CRTC 0 nv_crtc_dpms is called for CRTC 0 with mode 0 pre-Owner: 0x0 post-Owner: 0x0 nv_output_commit is called nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 (II) Mouse0: ps2EnableDataReporting: succeeded (II) 3rd Button detected: disabling emulate3Button (II) AIGLX: Suspending AIGLX clients for VT switch NVLeaveVT is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_restore is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll2_a 0003C50E writing vpll1_a 0003BE0C writing pllsel 00000500 nv_crtc_restore is called for CRTC 1 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll2_a 0003C50E writing vpll1_a 0003BE0C writing pllsel 00000500 nv_output_restore is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch NVEnterVT is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_analog_output_dpms is called with mode 3 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_lock is called for CRTC 0 nv_output_mode_fixup is called nv_crtc_mode_fixup is called for CRTC 0 nv_output_prepare is called nv_analog_output_dpms is called with mode 3 nv_crtc_prepare is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_mode_set is called for CRTC 0 (WW) NOUVEAU(0): Mode on CRTC 0 (II) NOUVEAU(0): Modeline "1024x768"x74.9 82.00 1024 1088 1192 1360 768 771 775 805 -hsync +vsync (60.3 kHz) pre-Owner: 0x0 post-Owner: 0x0 Mode clock: 82000 Adjusted mode clock: 82000 horizDisplay: 0x7F horizStart: 0x87 horizEnd: 0x94 horizTotal: 0xA5 horizBlankStart: 0x7F horizBlankEnd: 0xA9 vertDisplay: 0x2FF vertStart: 0x302 vertEnd: 0x306 vertTotal: 0x323 vertBlankStart: 0x2FF vertBlankEnd: 0x324 crtc 0 1024 2048 (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 There are 1 CRTC's enabled output 0 debug_0 01101100 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll1_a 0002FC0B writing pllsel 10000700 NVCrtcSetBase: x: 0 y: 0 nv_output_mode_set is called 0: crtc 0 output 0 twocrt 0 twomon 0 output reg: 0x1 0x0 nv_crtc_commit for CRTC 0 nv_crtc_dpms is called for CRTC 0 with mode 0 pre-Owner: 0x0 post-Owner: 0x0 nv_output_commit is called nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 (II) Mouse0: ps2EnableDataReporting: succeeded (II) AIGLX: Suspending AIGLX clients for VT switch NVLeaveVT is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_restore is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll2_a 0003C50E writing vpll1_a 0003BE0C writing pllsel 00000500 nv_crtc_restore is called for CRTC 1 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll2_a 0003C50E writing vpll1_a 0003BE0C writing pllsel 00000500 nv_output_restore is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch NVEnterVT is called pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 nv_analog_output_dpms is called with mode 3 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_lock is called for CRTC 0 nv_output_mode_fixup is called nv_crtc_mode_fixup is called for CRTC 0 nv_output_prepare is called nv_analog_output_dpms is called with mode 3 nv_crtc_prepare is called for CRTC 0 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_dpms is called for CRTC 0 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 nv_crtc_mode_set is called for CRTC 0 (WW) NOUVEAU(0): Mode on CRTC 0 (II) NOUVEAU(0): Modeline "1024x768"x74.9 82.00 1024 1088 1192 1360 768 771 775 805 -hsync +vsync (60.3 kHz) pre-Owner: 0x0 post-Owner: 0x0 Mode clock: 82000 Adjusted mode clock: 82000 horizDisplay: 0x7F horizStart: 0x87 horizEnd: 0x94 horizTotal: 0xA5 horizBlankStart: 0x7F horizBlankEnd: 0xA9 vertDisplay: 0x2FF vertStart: 0x302 vertEnd: 0x306 vertTotal: 0x323 vertBlankStart: 0x2FF vertBlankEnd: 0x324 crtc 0 1024 2048 (II) NOUVEAU(0): Read: Reg: 0x00101000, Data: 0x803FC443 There are 1 CRTC's enabled output 0 debug_0 01101100 pre-Owner: 0x0 post-Owner: 0x0 writing sel_clk 00000000 writing vpll1_a 0002FC0B writing pllsel 10000700 NVCrtcSetBase: x: 0 y: 0 nv_output_mode_set is called 0: crtc 0 output 0 twocrt 0 twomon 0 output reg: 0x1 0x0 nv_crtc_commit for CRTC 0 nv_crtc_dpms is called for CRTC 0 with mode 0 pre-Owner: 0x0 post-Owner: 0x0 nv_output_commit is called nv_analog_output_dpms is called with mode 0 nv_crtc_dpms is called for CRTC 1 with mode 3 pre-Owner: 0x0 post-Owner: 0x0 pre-Owner: 0x0 post-Owner: 0x0 (II) Mouse0: ps2EnableDataReporting: succeeded