[ 0.000000] Linux version 4.15.0-rc2-drm-tip-ww49-commit-66be577+ (gfx@bifrost) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #1 SMP Wed Dec 6 10:27:27 CST 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc2-drm-tip-ww49-commit-66be577+ root=UUID=2a8388ef-fcb0-4ae0-964a-bd124748729c ro quiet drm.debug=0xe pci=pcie_bus_safe intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic i915.alpha_support=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 log_buf_len=4M resume=/dev/nvme0n1p3 fastboot [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: xstate_offset[9]: 2560, xstate_sizes[9]: 8 [ 0.000000] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008349bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000008349c000-0x00000000834c0fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000834c1000-0x0000000083ad5fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000083ad6000-0x0000000083c81fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000083c82000-0x0000000083d0efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000083d0f000-0x0000000083d0ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000083d10000-0x000000008ebfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002713fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.60 by Intel [ 0.000000] efi: SMBIOS=0x836d1000 ACPI=0x83d0e000 ACPI 2.0=0x83d0e014 ESRT=0x806aeb98 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: Intel Corporation CannonLake Client Platform/CannonLake Y LPDDR4 RVP, BIOS CNLSFWR1.R00.X108.B01.1710120251 10/12/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x271400 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.000000] 2 base 0090000000 mask 7FF0000000 write-combining [ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable [ 0.000000] 4 base 008B000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 008A800000 mask 7FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0x83d10 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000806aeb98 to 0x00000000806aebf8. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x2325ac000, 0x2325acfff] PGTABLE [ 0.000000] BRK [0x2325ad000, 0x2325adfff] PGTABLE [ 0.000000] BRK [0x2325ae000, 0x2325aefff] PGTABLE [ 0.000000] BRK [0x2325af000, 0x2325affff] PGTABLE [ 0.000000] BRK [0x2325b0000, 0x2325b0fff] PGTABLE [ 0.000000] BRK [0x2325b1000, 0x2325b1fff] PGTABLE [ 0.000000] BRK [0x2325b2000, 0x2325b2fff] PGTABLE [ 0.000000] BRK [0x2325b3000, 0x2325b3fff] PGTABLE [ 0.000000] log_buf_len: 4194304 bytes [ 0.000000] early log buf free: 256864(97%) [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x3320c000-0x358fdfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000083D0E014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x0000000083CA1188 0000FC (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: FACP 0x0000000083D01000 000114 (v06 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: DSDT 0x0000000083CB3000 04A0F6 (v02 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: FACS 0x0000000083B2E000 000040 [ 0.000000] ACPI: SSDT 0x0000000083D0B000 0017CB (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x0000000083D07000 003229 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x0000000083D06000 0004C8 (v02 Intel_ Tpm2Tabl 00001000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x0000000083D05000 000046 (v02 MeSsdt MeSsdt 00003000 INTL 20160527) [ 0.000000] ACPI: TPM2 0x0000000083D04000 000034 (v04 00000000 00000000) [ 0.000000] ACPI: UEFI 0x0000000083B40000 000042 (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: SSDT 0x0000000083D03000 0005B6 (v02 Intel PerfTune 00001000 INTL 20160527) [ 0.000000] ACPI: ECDT 0x0000000083D02000 000069 (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: HPET 0x0000000083D00000 000038 (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: APIC 0x0000000083CFF000 00012C (v03 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: MCFG 0x0000000083CFE000 00003C (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: SSDT 0x0000000083CAF000 0030B0 (v02 INTEL CnlY_Rvp 00001000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x0000000083CAD000 0011AF (v02 INTEL Ther_Rvp 00001000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x0000000083CAB000 001490 (v02 INTEL xh_cyld4 00000000 INTL 20160527) [ 0.000000] ACPI: BOOT 0x0000000083CAA000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x0000000083CA8000 0019C4 (v02 INTEL UsbCTabl 00001000 INTL 20160527) [ 0.000000] ACPI: LPIT 0x0000000083CA7000 00005C (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: WSMT 0x0000000083CA6000 000028 (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: SSDT 0x0000000083CA3000 002815 (v02 INTEL PtidDevc 00001000 INTL 20160527) [ 0.000000] ACPI: SSDT 0x0000000083CA2000 000FBB (v02 INTEL TbtTypeC 00000000 INTL 20160527) [ 0.000000] ACPI: DBGP 0x0000000083D0D000 000034 (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: DBG2 0x0000000083CA0000 000054 (v00 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: NHLT 0x0000000083C9E000 001783 (v00 INTEL CNL 00000002 01000013) [ 0.000000] ACPI: FPDT 0x0000000083C9D000 000044 (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: ASF! 0x0000000083C9C000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x0000000083C9B000 000038 (v01 INTEL CNL-ULT 20170001 INTL 20160422) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002713fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x270ffb000-0x270ffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002713fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000008349bfff] [ 0.000000] node 0: [mem 0x0000000083d0f000-0x0000000083d0ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002713fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002713fffff] [ 0.000000] On node 0 totalpages: 2050107 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 27 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8339 pages used for memmap [ 0.000000] DMA32 zone: 533661 pages, LIFO batch:31 [ 0.000000] Normal zone: 23632 pages used for memmap [ 0.000000] Normal zone: 1512448 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Reserving Intel graphics memory at 0x000000008b000000-0x000000008ebfffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8349c000-0x834c0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x834c1000-0x83ad5fff] [ 0.000000] PM: Registered nosave memory: [mem 0x83ad6000-0x83c81fff] [ 0.000000] PM: Registered nosave memory: [mem 0x83c82000-0x83d0efff] [ 0.000000] PM: Registered nosave memory: [mem 0x83d10000-0x8ebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0x8ec00000-0xfe00ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xff5fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff600000-0xffffffff] [ 0.000000] e820: [mem 0x8ec00000-0xfe00ffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ (ptrval) s119064 r8192 d32488 u524288 [ 0.000000] pcpu-alloc: s119064 r8192 d32488 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2018045 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc2-drm-tip-ww49-commit-66be577+ root=UUID=2a8388ef-fcb0-4ae0-964a-bd124748729c ro quiet drm.debug=0xe pci=pcie_bus_safe intel_iommu=igfx_off auto panic=1 nmi_watchdog=panic i915.alpha_support=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 log_buf_len=4M resume=/dev/nvme0n1p3 fastboot [ 0.000000] DMAR: Disable GFX device mapping [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7875112K/8200428K available (8973K kernel code, 1488K rwdata, 3848K rodata, 1620K init, 1164K bss, 325316K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37602 entries in 147 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16640, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.004000] tsc: Detected 2200.000 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4416.00 BogoMIPS (lpj=8832000) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170831 [ 0.032881] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3AA97 (20170831/psloop-247) [ 0.032984] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3B1AB (20170831/psloop-247) [ 0.033078] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3B8BF (20170831/psloop-247) [ 0.033169] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3BFD3 (20170831/psloop-247) [ 0.033261] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3C729 (20170831/psloop-247) [ 0.033300] ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x3CAFD (20170831/psloop-247) [ 0.114762] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.115697] Security Framework initialized [ 0.115700] Yama: becoming mindful. [ 0.115730] AppArmor: AppArmor initialized [ 0.117920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.118952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.119001] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.119035] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.119444] CPU: Physical Processor ID: 0 [ 0.119445] CPU: Processor Core ID: 0 [ 0.119457] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.119458] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.119465] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature [ 0.119485] mce: CPU supports 8 MCE banks [ 0.119507] CPU0: Thermal monitoring enabled (TM1) [ 0.119539] process: using mwait in idle threads [ 0.119545] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.119546] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.121417] Freeing SMP alternatives memory: 36K [ 0.130062] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.136483] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.176240] TSC deadline timer enabled [ 0.176262] smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 1.00GHz (family: 0x6, model: 0x66, stepping: 0x2) [ 0.176381] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver. [ 0.176393] ... version: 4 [ 0.176394] ... bit width: 48 [ 0.176395] ... generic registers: 4 [ 0.176397] ... value mask: 0000ffffffffffff [ 0.176399] ... max period: 00007fffffffffff [ 0.176400] ... fixed-purpose events: 3 [ 0.176401] ... event mask: 000000070000000f [ 0.176453] Hierarchical SRCU implementation. [ 0.178101] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.178128] smp: Bringing up secondary CPUs ... [ 0.178260] x86: Booting SMP configuration: [ 0.178262] .... node #0, CPUs: #1 [ 0.004000] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature [ 0.179543] #2 [ 0.004000] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature [ 0.180221] #3 [ 0.004000] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature [ 0.181426] smp: Brought up 1 node, 4 CPUs [ 0.181426] smpboot: Max logical packages: 1 [ 0.181426] smpboot: Total of 4 processors activated (17664.00 BogoMIPS) [ 0.184514] devtmpfs: initialized [ 0.184514] x86/mm: Memory block size: 128MB [ 0.185485] evm: security.selinux [ 0.185486] evm: security.SMACK64 [ 0.185487] evm: security.SMACK64EXEC [ 0.185488] evm: security.SMACK64TRANSMUTE [ 0.185489] evm: security.SMACK64MMAP [ 0.185490] evm: security.apparmor [ 0.185491] evm: security.ima [ 0.185492] evm: security.capability [ 0.185519] PM: Registering ACPI NVS region [mem 0x83ad6000-0x83c81fff] (1753088 bytes) [ 0.185519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.185519] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.185519] pinctrl core: initialized pinctrl subsystem [ 0.185519] RTC time: 9:11:41, date: 12/07/17 [ 0.185519] NET: Registered protocol family 16 [ 0.185519] audit: initializing netlink subsys (disabled) [ 0.185519] audit: type=2000 audit(1512637901.184:1): state=initialized audit_enabled=0 res=1 [ 0.185519] cpuidle: using governor ladder [ 0.185519] cpuidle: using governor menu [ 0.185519] Simple Boot Flag at 0x47 set to 0x80 [ 0.188019] ACPI: bus type PCI registered [ 0.188022] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.188196] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.188214] PCI: not using MMCONFIG [ 0.188214] PCI: Using configuration type 1 for base access [ 0.190397] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.190397] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.190397] ACPI: Added _OSI(Module Device) [ 0.190397] ACPI: Added _OSI(Processor Device) [ 0.190397] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.190397] ACPI: Added _OSI(Processor Aggregator Device) [ 0.190397] ACPI: EC: EC started [ 0.190397] ACPI: EC: interrupt blocked [ 0.340294] ACPI: \: Used as first EC [ 0.340298] ACPI: \: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.340300] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.368829] ACPI: Executed 61 blocks of module-level executable AML code [ 0.479947] ACPI: Dynamic OEM Table Load: [ 0.479980] ACPI: SSDT 0xFFFF8F7A66C1E800 000642 (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.480437] ACPI: Executed 1 blocks of module-level executable AML code [ 0.480672] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.485535] ACPI: Dynamic OEM Table Load: [ 0.485554] ACPI: SSDT 0xFFFF8F7A66C1B000 00046F (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.485908] ACPI: Executed 1 blocks of module-level executable AML code [ 0.486311] ACPI: Dynamic OEM Table Load: [ 0.486326] ACPI: SSDT 0xFFFF8F7A66EDB400 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.486651] ACPI: Executed 1 blocks of module-level executable AML code [ 0.486891] ACPI: Dynamic OEM Table Load: [ 0.486909] ACPI: SSDT 0xFFFF8F7A66C1F800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.487196] ACPI: Executed 1 blocks of module-level executable AML code [ 0.488206] ACPI: Dynamic OEM Table Load: [ 0.488230] ACPI: SSDT 0xFFFF8F7A66CC8000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.489898] ACPI: Executed 1 blocks of module-level executable AML code [ 0.490280] ACPI: Dynamic OEM Table Load: [ 0.490295] ACPI: SSDT 0xFFFF8F7A66D8B000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.490735] ACPI: Executed 1 blocks of module-level executable AML code [ 0.491139] ACPI: Dynamic OEM Table Load: [ 0.491152] ACPI: SSDT 0xFFFF8F7A66D8A800 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.491590] ACPI: Executed 1 blocks of module-level executable AML code [ 0.497052] ACPI: Interpreter enabled [ 0.497180] ACPI: (supports S0 S3 S4 S5) [ 0.497182] ACPI: Using IOAPIC for interrupt routing [ 0.497278] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.506855] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.506886] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.510874] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.532034] ACPI: Power Resource [BTPR] (on) [ 0.535235] ACPI: Power Resource [USBC] (on) [ 0.535647] ACPI: Power Resource [PAUD] (on) [ 0.545066] ACPI: Power Resource [PXP] (off) [ 0.550034] ACPI: Power Resource [PXP] (off) [ 0.556856] ACPI: Power Resource [PXP] (on) [ 0.690995] ACPI: Power Resource [V0PR] (on) [ 0.691461] ACPI: Power Resource [V1PR] (on) [ 0.691913] ACPI: Power Resource [V2PR] (on) [ 0.707900] ACPI: Power Resource [PXTC] (on) [ 0.744705] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.758847] ACPI: Power Resource [FN00] (off) [ 0.759037] ACPI: Power Resource [FN01] (off) [ 0.759217] ACPI: Power Resource [FN02] (off) [ 0.759396] ACPI: Power Resource [FN03] (off) [ 0.759576] ACPI: Power Resource [FN04] (off) [ 0.761279] ACPI: Power Resource [PIN] (off) [ 0.762109] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.762120] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.772745] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.778903] PCI host bridge to bus 0000:00 [ 0.778908] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.778911] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.778914] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.778917] pci_bus 0000:00: root bus resource [mem 0x8ec00000-0xdfffffff window] [ 0.778919] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] [ 0.778921] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.778977] pci 0000:00:00.0: [8086:5a02] type 00 class 0x060000 [ 0.782080] pci 0000:00:02.0: [8086:5a49] type 00 class 0x030000 [ 0.782106] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] [ 0.782119] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.782129] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.782162] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.784356] pci 0000:00:08.0: [8086:5a11] type 00 class 0x088000 [ 0.784383] pci 0000:00:08.0: reg 0x10: [mem 0xa123c000-0xa123cfff 64bit] [ 0.786611] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000 [ 0.786662] pci 0000:00:12.0: reg 0x10: [mem 0xa123d000-0xa123dfff 64bit] [ 0.788925] pci 0000:00:13.0: [8086:9dfc] type 00 class 0x070000 [ 0.788976] pci 0000:00:13.0: reg 0x10: [mem 0xa1238000-0xa1239fff 64bit] [ 0.789106] pci 0000:00:13.0: PME# supported from D0 D3hot [ 0.791494] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330 [ 0.791548] pci 0000:00:14.0: reg 0x10: [mem 0xa1220000-0xa122ffff 64bit] [ 0.791699] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.794005] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000 [ 0.794052] pci 0000:00:14.2: reg 0x10: [mem 0xa123a000-0xa123bfff 64bit] [ 0.794083] pci 0000:00:14.2: reg 0x18: [mem 0xa123e000-0xa123efff 64bit] [ 0.796316] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000 [ 0.796506] pci 0000:00:14.3: reg 0x10: [mem 0xa1230000-0xa1233fff 64bit] [ 0.797101] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.799316] pci 0000:00:14.5: [8086:9df5] type 00 class 0x080501 [ 0.799369] pci 0000:00:14.5: reg 0x10: [mem 0xa123f000-0xa123ffff 64bit] [ 0.802052] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000 [ 0.802792] pci 0000:00:15.0: reg 0x10: [mem 0xa1240000-0xa1240fff 64bit] [ 0.807303] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000 [ 0.808051] pci 0000:00:15.1: reg 0x10: [mem 0xa1241000-0xa1241fff 64bit] [ 0.812371] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000 [ 0.812425] pci 0000:00:16.0: reg 0x10: [mem 0xa1242000-0xa1242fff 64bit] [ 0.812574] pci 0000:00:16.0: PME# supported from D3hot [ 0.814977] pci 0000:00:16.4: [8086:9de4] type 00 class 0x078000 [ 0.815031] pci 0000:00:16.4: reg 0x10: [mem 0xa1243000-0xa1243fff 64bit] [ 0.815180] pci 0000:00:16.4: PME# supported from D3hot [ 0.817565] pci 0000:00:19.0: [8086:9dc5] type 00 class 0x0c8000 [ 0.818236] pci 0000:00:19.0: reg 0x10: [mem 0xa1244000-0xa1244fff 64bit] [ 0.822547] pci 0000:00:1a.0: [8086:9dc4] type 00 class 0x080501 [ 0.822601] pci 0000:00:1a.0: reg 0x10: [mem 0xa1245000-0xa1245fff 64bit] [ 0.825226] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400 [ 0.825417] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.827995] pci 0000:00:1e.0: [8086:9da8] type 00 class 0x078000 [ 0.828702] pci 0000:00:1e.0: reg 0x10: [mem 0xa1246000-0xa1246fff 64bit] [ 0.832961] pci 0000:00:1f.0: [8086:9d83] type 00 class 0x060100 [ 0.835267] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040100 [ 0.835349] pci 0000:00:1f.3: reg 0x10: [mem 0xa1234000-0xa1237fff 64bit] [ 0.835425] pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit] [ 0.835574] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.838121] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500 [ 0.838236] pci 0000:00:1f.4: reg 0x10: [mem 0xa1247000-0xa12470ff 64bit] [ 0.838341] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.840613] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000 [ 0.840653] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.842840] pci 0000:00:1f.6: [8086:15be] type 00 class 0x020000 [ 0.842910] pci 0000:00:1f.6: reg 0x10: [mem 0xa1200000-0xa121ffff] [ 0.843140] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.845667] pci 0000:01:00.0: [8086:f1a5] type 00 class 0x010802 [ 0.845716] pci 0000:01:00.0: reg 0x10: [mem 0xa1100000-0xa1103fff 64bit] [ 0.860168] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 0.860176] pci 0000:00:1d.0: bridge window [mem 0xa1100000-0xa11fffff] [ 0.860205] pci 0000:00:1d.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128 [ 0.860280] pci 0000:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 0.870963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.870963] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.870963] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.870963] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.870963] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.870979] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.871105] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.871230] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 0.872647] platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff] [ 0.872660] acpi MSFT0101:00: platform device creation failed: -16 [ 0.876008] ACPI: EC: interrupt unblocked [ 0.876008] ACPI: EC: event unblocked [ 0.876008] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.876008] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events [ 0.876025] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.876025] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.876033] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.876035] vgaarb: loaded [ 0.876387] SCSI subsystem initialized [ 0.876414] libata version 3.00 loaded. [ 0.876414] ACPI: bus type USB registered [ 0.876414] usbcore: registered new interface driver usbfs [ 0.876414] usbcore: registered new interface driver hub [ 0.876414] usbcore: registered new device driver usb [ 0.876414] EDAC MC: Ver: 3.0.0 [ 0.876570] Registered efivars operations [ 0.889649] PCI: Using ACPI for IRQ routing [ 0.976416] PCI: pci_cache_line_size set to 64 bytes [ 0.977136] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.977138] e820: reserve RAM buffer [mem 0x8349c000-0x83ffffff] [ 0.977141] e820: reserve RAM buffer [mem 0x83d10000-0x83ffffff] [ 0.977143] e820: reserve RAM buffer [mem 0x271400000-0x273ffffff] [ 0.977310] NetLabel: Initializing [ 0.977311] NetLabel: domain hash size = 128 [ 0.977312] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.977343] NetLabel: unlabeled traffic allowed by default [ 0.977369] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.977369] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.978409] clocksource: Switched to clocksource hpet [ 0.995833] VFS: Disk quotas dquot_6.6.0 [ 0.995861] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.996109] AppArmor: AppArmor Filesystem Enabled [ 0.996151] pnp: PnP ACPI init [ 0.996745] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.996749] system 00:00: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.996753] system 00:00: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.996755] system 00:00: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.996758] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.996761] system 00:00: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.996770] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.997487] system 00:01: [io 0x2000-0x20fe] has been reserved [ 0.997493] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.997920] system 00:02: [io 0x06a4] has been reserved [ 0.997922] system 00:02: [io 0x06a0] has been reserved [ 0.997928] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.998406] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.998409] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.998415] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.998453] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.998657] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.998663] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.998838] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.998962] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.001633] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.004692] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.004695] system 00:09: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 1.004698] system 00:09: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 1.004701] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 1.004703] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.004706] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.004708] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.004711] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 1.004714] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.004719] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.005965] system 00:0a: [mem 0x00000000-0x0009cfff] could not be reserved [ 1.005970] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.006390] pnp: PnP ACPI: found 11 devices [ 1.020813] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.020854] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 1.020874] pci 0000:00:1d.0: bridge window [mem 0xa1100000-0xa11fffff] [ 1.020900] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.020903] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.020906] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.020908] pci_bus 0000:00: resource 7 [mem 0x8ec00000-0xdfffffff window] [ 1.020911] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window] [ 1.020913] pci_bus 0000:01: resource 1 [mem 0xa1100000-0xa11fffff] [ 1.021448] NET: Registered protocol family 2 [ 1.021718] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.021962] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.022194] TCP: Hash tables configured (established 65536 bind 65536) [ 1.022246] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.022291] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.022389] NET: Registered protocol family 1 [ 1.022424] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.022897] PCI: CLS 0 bytes, default 64 [ 1.022960] Trying to unpack rootfs image as initramfs... [ 2.701826] Freeing initrd memory: 39880K [ 2.701846] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.701852] software IO TLB [mem 0x7b7f4000-0x7f7f4000] (64MB) mapped at [0000000031482712-00000000b8cb4095] [ 2.702018] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns [ 2.702394] Scanning for low memory corruption every 60 seconds [ 2.703893] Initialise system trusted keyrings [ 2.703908] Key type blacklist registered [ 2.704111] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 2.706160] zbud: loaded [ 2.706855] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.707272] fuse init (API version 7.26) [ 2.707537] Allocating IMA blacklist keyring. [ 2.715605] Key type asymmetric registered [ 2.715607] Asymmetric key parser 'x509' registered [ 2.715663] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.715781] io scheduler noop registered [ 2.715783] io scheduler deadline registered (default) [ 2.715877] io scheduler cfq registered [ 2.715879] io scheduler mq-deadline registered (default) [ 2.715881] io scheduler kyber registered [ 2.717131] pcieport 0000:00:1d.0: AER enabled with IRQ 120 [ 2.717181] pcieport 0000:00:1d.0: Signaling PME with IRQ 120 [ 2.717269] dpc 0000:00:1d.0:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 2.717340] efifb: probing for efifb [ 2.717362] efifb: framebuffer at 0x90000000, using 14400k, total 14400k [ 2.717364] efifb: mode is 2560x1440x32, linelength=10240, pages=1 [ 2.717365] efifb: scrolling: redraw [ 2.717368] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.735305] Console: switching to colour frame buffer device 320x90 [ 2.753071] fb0: EFI VGA frame buffer device [ 2.753088] intel_idle: does not run on family 6 model 102 [ 2.753406] ACPI: AC Adapter [ADP1] (on-line) [ 2.753509] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/PNP0C09:00/PNP0C0D:00/input/input0 [ 2.753542] ACPI: Lid Switch [LID0] [ 2.753642] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.753791] ACPI: Power Button [PWRB] [ 2.753848] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 2.753880] ACPI: Sleep Button [SLPB] [ 2.753943] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.754065] ACPI: Power Button [PWRF] [ 2.833241] Monitor-Mwait will be used to enter C-1 state [ 2.833248] Monitor-Mwait will be used to enter C-2 state [ 2.833253] Monitor-Mwait will be used to enter C-3 state [ 2.839939] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.912109] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.912111] ACPI: Thermal Zone [TZ00] (31 C) [ 2.919418] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.919420] ACPI: Thermal Zone [TZ01] (0 C) [ 2.919781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.919892] ACPI: Battery Slot [BAT0] (battery present) [ 2.920072] ACPI: Battery Slot [BAT1] (battery absent) [ 2.920177] ACPI: Battery Slot [BAT2] (battery absent) [ 2.941663] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.947239] serial 0000:00:13.0: enabling device (0000 -> 0002) [ 2.948683] Linux agpgart interface v0.103 [ 2.953909] brd: module loaded [ 2.956913] loop: module loaded [ 2.957652] nvme nvme0: pci function 0000:01:00.0 [ 2.958116] libphy: Fixed MDIO Bus: probed [ 2.958119] tun: Universal TUN/TAP device driver, 1.6 [ 2.958332] PPP generic driver version 2.4.2 [ 2.958557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.958565] ehci-pci: EHCI PCI platform driver [ 2.958588] ehci-platform: EHCI generic platform driver [ 2.958615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.958618] ohci-pci: OHCI PCI platform driver [ 2.958635] ohci-platform: OHCI generic platform driver [ 2.958650] uhci_hcd: USB Universal Host Controller Interface driver [ 2.958763] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.958771] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.960195] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x00009810 [ 2.960218] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.960564] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.960567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.960569] usb usb1: Product: xHCI Host Controller [ 2.960571] usb usb1: Manufacturer: Linux 4.15.0-rc2-drm-tip-ww49-commit-66be577+ xhci-hcd [ 2.960573] usb usb1: SerialNumber: 0000:00:14.0 [ 2.960932] hub 1-0:1.0: USB hub found [ 2.960969] hub 1-0:1.0: 12 ports detected [ 2.964142] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.964148] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.964153] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.964231] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.964234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.964236] usb usb2: Product: xHCI Host Controller [ 2.964239] usb usb2: Manufacturer: Linux 4.15.0-rc2-drm-tip-ww49-commit-66be577+ xhci-hcd [ 2.964240] usb usb2: SerialNumber: 0000:00:14.0 [ 2.964502] hub 2-0:1.0: USB hub found [ 2.964532] hub 2-0:1.0: 6 ports detected [ 2.966371] usb: port power management may be unreliable [ 2.966907] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.966909] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.967393] i8042: Warning: Keylock active [ 2.967577] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.968086] mousedev: PS/2 mouse device common for all mice [ 2.969071] rtc_cmos 00:04: RTC can wake from S4 [ 2.969930] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.970103] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.970116] i2c /dev entries driver [ 2.970210] device-mapper: uevent: version 1.0.3 [ 2.970450] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.970456] intel_pstate: Intel P-state driver initializing [ 2.972658] intel_pstate: HWP enabled [ 2.973210] ledtrig-cpu: registered to indicate activity on CPUs [ 2.973212] EFI Variables Facility v0.08 2004-May-17 [ 2.983404] NET: Registered protocol family 10 [ 2.983672] Segment Routing with IPv6 [ 2.983686] NET: Registered protocol family 17 [ 2.983692] Key type dns_resolver registered [ 2.984289] microcode: sig=0x60662, pf=0x80, revision=0x1a [ 2.984456] microcode: Microcode Update Driver: v2.2. [ 2.984463] sched_clock: Marking stable (2984453000, 0)->(2995161770, -10708770) [ 2.985121] registered taskstats version 1 [ 2.985122] Loading compiled-in X.509 certificates [ 2.987778] Loaded X.509 cert 'Build time autogenerated kernel key: 5d1940976507c9752585293b8c89fb19dc62df49' [ 2.987792] zswap: loaded using pool lzo/zbud [ 2.991577] Key type big_key registered [ 2.993459] Key type trusted registered [ 2.994930] Key type encrypted registered [ 2.994933] AppArmor: AppArmor sha1 policy hashing enabled [ 2.994941] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.994958] evm: HMAC attrs: 0x1 [ 2.996811] Magic number: 13:132:171 [ 2.996897] acpi device:34: hash matches [ 2.997227] rtc_cmos 00:04: setting system clock to 2017-12-07 09:11:44 UTC (1512637904) [ 2.997599] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.997599] EDD information not available. [ 3.179732] nvme0n1: p1 p2 p3 [ 3.196211] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 3.296222] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 3.467128] usb 1-4: New USB device found, idVendor=0b95, idProduct=7720 [ 3.467129] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.467130] usb 1-4: Product: AX88772 [ 3.467131] usb 1-4: SerialNumber: 00D225 [ 3.576212] atkbd serio0: Failed to enable keyboard on isa0060/serio0 [ 3.576265] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.577353] PM: Image not found (code -22) [ 3.583978] Freeing unused kernel memory: 1620K [ 3.583979] Write protecting the kernel read-only data: 14336k [ 3.584711] Freeing unused kernel memory: 1240K [ 3.585307] Freeing unused kernel memory: 248K [ 3.591425] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.596089] usb 1-10: new full-speed USB device number 3 using xhci_hcd [ 3.713167] clocksource: Switched to clocksource tsc [ 3.717592] pps_core: LinuxPPS API ver. 1 registered [ 3.717593] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.719293] PTP clock support registered [ 3.721227] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01) [ 3.727072] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.727073] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.727109] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 3.727428] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.745296] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa [ 3.745298] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.778630] Setting dangerous option alpha_support - tainting kernel [ 3.778633] i915: unknown parameter 'enable_guc_loading' ignored [ 3.778636] i915: unknown parameter 'enable_guc_submission' ignored [ 4.013461] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 4.104298] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 [ 4.104299] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 4.104513] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 4.104884] [drm] GuC: No firmware known for this platform! [ 4.104885] [drm] HuC: No firmware known for this platform! [ 4.104960] [drm:i915_driver_load [i915]] Found Cannon Lake LP PCH (CNP-LP) [ 4.104995] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03 [ 4.105142] [drm:intel_device_info_dump [i915]] i915 device info: platform=CANNONLAKE gen=10 pciid=0x5a49 rev=0x03 [ 4.105181] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no [ 4.105219] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no [ 4.105221] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 4.105255] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: yes [ 4.105280] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes [ 4.105329] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes [ 4.105353] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: yes [ 4.105377] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes [ 4.105400] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes [ 4.105423] [drm:intel_device_info_dump [i915]] i915 device info: has_reset_engine: yes [ 4.105446] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes [ 4.105470] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes [ 4.105493] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes [ 4.105516] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: yes [ 4.105539] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no [ 4.105561] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: yes [ 4.105584] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no [ 4.105606] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes [ 4.105628] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no [ 4.105651] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes [ 4.105673] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes [ 4.105695] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_preemption: yes [ 4.105718] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no [ 4.105740] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no [ 4.105762] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes [ 4.105784] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes [ 4.105805] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no [ 4.105827] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes [ 4.105849] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes [ 4.105871] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no [ 4.105893] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no [ 4.105915] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no [ 4.105937] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no [ 4.105959] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no [ 4.105981] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no [ 4.106006] [drm:i915_driver_load [i915]] i915 device info: has_ipc: yes [ 4.106154] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001 [ 4.106176] [drm:intel_device_info_runtime_init [i915]] slice total: 1 [ 4.106198] [drm:intel_device_info_runtime_init [i915]] subslice total: 2 [ 4.106220] [drm:intel_device_info_runtime_init [i915]] subslice mask 0006 [ 4.106242] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 2 [ 4.106263] [drm:intel_device_info_runtime_init [i915]] EU total: 16 [ 4.106285] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 8 [ 4.106306] [drm:intel_device_info_runtime_init [i915]] has slice power gating: y [ 4.106328] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: y [ 4.106349] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y [ 4.106374] [drm:i915_driver_load [i915]] CS timestamp frequency: 12000 kHz [ 4.106399] [drm:i915_driver_load [i915]] ppgtt mode: 3 [ 4.106435] [drm:intel_uc_sanitize_options [i915]] enable_guc=0 (submission:no huc:no) [ 4.106449] [drm] Memory usable by graphics device = 4096M [ 4.106479] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M [ 4.106509] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 60M [ 4.106510] checking generic (90000000 e10000) vs hw (90000000 10000000) [ 4.106511] fb: switching to inteldrmfb from EFI VGA [ 4.106527] Console: switching to colour dummy device 80x25 [ 4.106699] [drm] Replacing VGA console driver [ 4.106743] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 60416K [ 4.106817] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x83c51018 [ 4.106868] [drm:intel_opregion_setup [i915]] Public ACPI methods supported [ 4.106913] [drm:intel_opregion_setup [i915]] SWSCI supported [ 4.107993] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 [ 4.108035] [drm:intel_opregion_setup [i915]] ASLE supported [ 4.108072] [drm:intel_opregion_setup [i915]] ASLE extension supported [ 4.108126] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) [ 4.108214] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params [ 4.108215] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.108216] [drm] Driver supports precise vblank timestamp query. [ 4.108251] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz [ 4.108284] [drm:intel_bios_init [i915]] VBT signature "$VBT CANONLAKE ", BDB version 210 [ 4.108316] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 4.108347] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 [ 4.108379] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 210 not known; assuming 38 [ 4.109043] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) [ 4.109074] [drm:intel_bios_init [i915]] Panel type: 2 (VBT) [ 4.109104] [drm:intel_bios_init [i915]] DRRS supported mode is seamless [ 4.109135] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables: [ 4.109153] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 4.109182] [drm:intel_bios_init [i915]] VBT initial LVDS value 300 [ 4.109213] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 [ 4.109242] [drm:intel_bios_init [i915]] DRRS State Enabled:1 [ 4.109271] [drm:intel_bios_init [i915]] Skipping SDVO device mapping [ 4.109300] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 [ 4.109328] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0 [ 4.109356] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:0 DVI:0 EDP:0 CRT:0 [ 4.109384] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 0 [ 4.109412] [drm:intel_bios_init [i915]] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0 [ 4.109440] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 0 [ 4.109467] [drm:intel_bios_init [i915]] Port D VBT info: DP:1 HDMI:0 DVI:0 EDP:0 CRT:0 [ 4.109495] [drm:intel_bios_init [i915]] VBT HDMI level shift for port D: 0 [ 4.109552] [drm:intel_dsm_detect [i915]] no _DSM method for intel device [ 4.109665] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz [ 4.109695] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 4.109752] [drm:intel_power_well_enable [i915]] enabling power well 1 [ 4.109788] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 528000 kHz, VCO 1056000 kHz, ref 24000 kHz, voltage level 2 [ 4.109828] [drm:intel_power_well_enable [i915]] enabling always-on [ 4.109855] [drm:intel_power_well_enable [i915]] enabling AUX A [ 4.109881] [drm:intel_power_well_enable [i915]] enabling AUX B [ 4.109910] [drm:intel_power_well_enable [i915]] enabling AUX C [ 4.109938] [drm:intel_power_well_enable [i915]] enabling AUX D [ 4.109965] [drm:intel_power_well_enable [i915]] enabling DC off [ 4.109991] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00 [ 4.110019] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 4.110025] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.110051] [drm:intel_power_well_enable [i915]] enabling DDI A IO power well [ 4.110077] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well [ 4.110104] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well [ 4.110131] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well [ 4.110168] [drm:intel_csr_ucode_init [i915]] Loading i915/cnl_dmc_ver1_06.bin [ 4.110612] [drm] Finished loading DMC firmware i915/cnl_dmc_ver1_06.bin (v1.6) [ 4.111849] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 [ 4.111892] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) [ 4.111922] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) [ 4.111949] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) [ 4.111977] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) [ 4.112004] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) [ 4.112037] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) [ 4.112075] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) [ 4.112099] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) [ 4.112137] [drm:intel_modeset_init [i915]] 3 display pipes available. [ 4.112212] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 528000 kHz, VCO 1056000 kHz, ref 24000 kHz, voltage level 2 [ 4.112246] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 528000 kHz [ 4.112281] [drm:intel_modeset_init [i915]] Max dotclock rate: 1056000 kHz [ 4.112622] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A [ 4.112658] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT) [ 4.112812] [drm:intel_pps_dump_state [i915]] cur t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 [ 4.112844] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 [ 4.112877] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 [ 4.112908] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200 [ 4.113203] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 [ 4.113315] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 4.113573] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f [ 4.114204] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 0a 84 41 00 00 01 01 02 00 00 00 00 0b 00 [ 4.114809] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 4.115282] [drm:intel_dp_init_connector [i915]] Detected EDP PSR Panel. [ 4.115768] [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 00 [ 4.120347] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.120401] [drm:intel_dp_init_connector [i915]] Downclock mode is not found. DRRS not supported [ 4.120551] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 120000/120000 [ 4.120629] [drm:intel_ddi_init [i915]] Forcing DDI_A_4_LANES for port A [ 4.120661] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B [ 4.120691] [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT) [ 4.120726] [drm:intel_ddi_init [i915]] Forcing DDI_A_4_LANES for port A [ 4.120756] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C [ 4.120786] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port C (VBT) [ 4.120817] [drm:intel_ddi_init [i915]] Forcing DDI_A_4_LANES for port A [ 4.120851] [drm:intel_dp_init_connector [i915]] Adding DP connector on port D [ 4.120880] [drm:intel_dp_init_connector [i915]] using AUX D for port D (VBT) [ 4.120929] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.120962] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.120995] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.121027] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.121058] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1 [ 4.121090] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:43:pipe A] hw state readout: enabled [ 4.121122] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.121152] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.121183] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.121213] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.121243] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0 [ 4.121272] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe B] hw state readout: disabled [ 4.121303] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 4.121332] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 4.121360] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 4.121389] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 4.121418] [drm:intel_modeset_setup_hw_state [i915]] pipe C active planes 0x0 [ 4.121447] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:75:pipe C] hw state readout: disabled [ 4.121477] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1 [ 4.121506] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0 [ 4.121535] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0 [ 4.121571] [drm:intel_ddi_get_config [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp [ 4.121603] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:76:DDI A] hw state readout: enabled, pipe A [ 4.121634] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:83:DDI B] hw state readout: disabled, pipe A [ 4.121664] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:85:DP-MST A] hw state readout: disabled, pipe A [ 4.121693] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:86:DP-MST B] hw state readout: disabled, pipe B [ 4.121721] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:87:DP-MST C] hw state readout: disabled, pipe C [ 4.121750] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:89:DDI C] hw state readout: disabled, pipe A [ 4.121778] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:92:DDI D] hw state readout: disabled, pipe A [ 4.121805] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DP-MST A] hw state readout: disabled, pipe A [ 4.121833] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:95:DP-MST B] hw state readout: disabled, pipe B [ 4.121861] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST C] hw state readout: disabled, pipe C [ 4.121891] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:77:eDP-1] hw state readout: enabled [ 4.121920] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:84:DP-1] hw state readout: disabled [ 4.121948] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:90:HDMI-A-1] hw state readout: disabled [ 4.121976] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:93:DP-2] hw state readout: disabled [ 4.122016] [drm:intel_dump_pipe_config [i915]] [CRTC:43:pipe A][setup_hw_state] [ 4.122047] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 4.122077] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [ 4.122107] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5633183, gmch_n: 8388608, link_m: 469431, link_n: 524288, tu: 64 [ 4.122136] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.122165] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.122175] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 241749 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0xa [ 4.122204] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.122213] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 241749 2560 2608 2640 2720 1440 1443 1448 1481 0x40 0xa [ 4.122243] [drm:intel_dump_pipe_config [i915]] crtc timings: 241749 2560 2608 2640 2720 1440 1443 1448 1481, type: 0x40 flags: 0xa [ 4.122273] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 2560x1440, pixel rate 241749 [ 4.122302] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 4.122330] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.122358] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.122387] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: cfgcr0: 0x2000000, cfgcr1: 0x0 [ 4.122415] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.122443] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1 [ 4.122470] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2A] disabled, scaler_id = -1 [ 4.122499] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 3A] disabled, scaler_id = -1 [ 4.122526] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 4A] disabled, scaler_id = -1 [ 4.122554] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor A] disabled, scaler_id = -1 [ 4.122582] [drm:intel_dump_pipe_config [i915]] [CRTC:59:pipe B][setup_hw_state] [ 4.122609] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 4.122636] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0 [ 4.122663] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.122690] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.122700] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.122728] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.122737] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.122766] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 4.122793] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 4.122821] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 4.122848] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.122875] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.122903] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0 [ 4.122931] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.122959] [drm:intel_dump_pipe_config [i915]] [PLANE:44:plane 1B] disabled, scaler_id = -1 [ 4.122986] [drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 2B] disabled, scaler_id = -1 [ 4.123013] [drm:intel_dump_pipe_config [i915]] [PLANE:50:plane 3B] disabled, scaler_id = -1 [ 4.123041] [drm:intel_dump_pipe_config [i915]] [PLANE:53:plane 4B] disabled, scaler_id = -1 [ 4.123068] [drm:intel_dump_pipe_config [i915]] [PLANE:56:cursor B] disabled, scaler_id = -1 [ 4.123095] [drm:intel_dump_pipe_config [i915]] [CRTC:75:pipe C][setup_hw_state] [ 4.123122] [drm:intel_dump_pipe_config [i915]] output_types: (0x0) [ 4.123150] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0 [ 4.123177] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.123204] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.123214] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.123242] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.123251] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 4.123280] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 4.123308] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0 [ 4.123336] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 4.123363] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.123390] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.123417] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0 [ 4.123444] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.123471] [drm:intel_dump_pipe_config [i915]] [PLANE:60:plane 1C] disabled, scaler_id = -1 [ 4.123498] [drm:intel_dump_pipe_config [i915]] [PLANE:63:plane 2C] disabled, scaler_id = -1 [ 4.123525] [drm:intel_dump_pipe_config [i915]] [PLANE:66:plane 3C] disabled, scaler_id = -1 [ 4.123553] [drm:intel_dump_pipe_config [i915]] [PLANE:69:plane 4C] disabled, scaler_id = -1 [ 4.123580] [drm:intel_dump_pipe_config [i915]] [PLANE:72:cursor C] disabled, scaler_id = -1 [ 4.123654] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well [ 4.123709] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well [ 4.123761] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well [ 4.123813] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 4.123844] [drm:intel_power_well_disable [i915]] disabling AUX D [ 4.123895] [drm:intel_power_well_disable [i915]] disabling AUX C [ 4.123945] [drm:intel_power_well_disable [i915]] disabling AUX B [ 4.124015] [drm:skylake_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2560x1440@32, offset=0, pitch 10240, size 0xe10000 [ 4.124051] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=e10000 [ 4.124082] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space [ 4.124116] [drm:intel_plane_disable_noatomic [i915]] pipe A active planes 0x0 [ 4.124638] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000] [ 4.124688] [drm:i915_gem_contexts_init [i915]] logical context support initialized [ 4.124727] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfffff000 [ 4.124875] [drm:intel_engine_init_common [i915]] rcs0 hws offset: 0xfffd8000 [ 4.125022] [drm:intel_engine_init_common [i915]] bcs0 hws offset: 0xfffd1000 [ 4.125178] [drm:intel_engine_init_common [i915]] vcs0 hws offset: 0xfffca000 [ 4.125244] [drm:intel_engine_init_common [i915]] vecs0 hws offset: 0xfffc3000 [ 4.125399] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0 [ 4.125433] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 6 [ 4.125535] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0 [ 4.125639] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0 [ 4.125742] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0 [ 4.126165] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping [ 4.126199] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping [ 4.126232] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping [ 4.126263] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config [ 4.126877] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered [ 4.126925] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1 [ 4.127070] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1 [ 4.127225] [drm:intel_dp_connector_register [i915]] registering DPDDC-D bus for card0-DP-2 [ 4.127292] [drm] Initialized i915 1.6.0 20171201 for 0000:00:02.0 on minor 0 [ 4.127419] [drm:intel_opregion_register [i915]] 4 outputs detected [ 4.138385] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.138823] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 4.138961] [drm:drm_setup_crtcs [drm_kms_helper]] [ 4.138970] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:77:eDP-1] [ 4.139024] [drm:intel_dp_detect [i915]] [CONNECTOR:77:eDP-1] [ 4.139077] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 4.139122] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 4.139165] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 4.139769] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 4.140736] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:77:eDP-1] status updated from unknown to connected [ 4.140752] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 4.140768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:77:eDP-1] probed modes : [ 4.140778] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"2560x1440" 60 241750 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [ 4.140782] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:DP-1] [ 4.140816] [drm:intel_dp_detect [i915]] [CONNECTOR:84:DP-1] [ 4.140847] [drm:intel_power_well_enable [i915]] enabling AUX B [ 4.140881] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 4.140961] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 4.140995] [drm:intel_power_well_disable [i915]] disabling AUX B [ 4.141024] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:DP-1] status updated from unknown to disconnected [ 4.141028] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:DP-1] disconnected [ 4.141032] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:90:HDMI-A-1] [ 4.141067] [drm:intel_hdmi_detect [i915]] [CONNECTOR:90:HDMI-A-1] [ 4.141621] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.141653] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.142203] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 4.142214] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 4.142764] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.142794] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 4.143343] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 4.143349] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 4.143353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:90:HDMI-A-1] status updated from unknown to disconnected [ 4.143357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:90:HDMI-A-1] disconnected [ 4.143361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:DP-2] [ 4.143392] [drm:intel_dp_detect [i915]] [CONNECTOR:93:DP-2] [ 4.143424] [drm:intel_power_well_enable [i915]] enabling AUX D [ 4.143455] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 4.143533] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 4.143564] [drm:intel_power_well_disable [i915]] disabling AUX D [ 4.143594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:DP-2] status updated from unknown to disconnected [ 4.143597] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:DP-2] disconnected [ 4.143602] [drm:drm_setup_crtcs [drm_kms_helper]] connector 77 enabled? yes [ 4.143606] [drm:drm_setup_crtcs [drm_kms_helper]] connector 84 enabled? no [ 4.143609] [drm:drm_setup_crtcs [drm_kms_helper]] connector 90 enabled? no [ 4.143613] [drm:drm_setup_crtcs [drm_kms_helper]] connector 93 enabled? no [ 4.143649] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 4.143654] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 77 [ 4.143658] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 77 0 [ 4.143661] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 2560x1440 [ 4.143665] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config [ 4.143670] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 2560x1440 set on crtc 43 (0,0) [ 4.143704] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one [ 4.145731] [drm:intelfb_create [i915]] allocated 2560x1440 fb: 0x00040000 [ 4.145910] fbcon: inteldrmfb (fb0) is primary device [ 4.146036] [drm:intel_atomic_check [i915]] [CONNECTOR:77:eDP-1] checking for sink bpp constrains [ 4.146074] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24 [ 4.146085] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"2560x1440" 60 241750 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [ 4.146162] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 241750KHz [ 4.146199] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 4 clock 270000 bpp 24 [ 4.146231] [drm:intel_dp_compute_config [i915]] DP link bw required 725250 available 1080000 [ 4.146261] [drm:intel_dp_compute_config [i915]] PSR disable by flag [ 4.146294] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0 [ 4.146328] [drm:intel_dump_pipe_config [i915]] [CRTC:43:pipe A][modeset] [ 4.146360] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100) [ 4.146391] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 [ 4.146423] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5633183, gmch_n: 8388608, link_m: 469431, link_n: 524288, tu: 64 [ 4.146453] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0 [ 4.146483] [drm:intel_dump_pipe_config [i915]] requested mode: [ 4.146492] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 241750 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [ 4.146522] [drm:intel_dump_pipe_config [i915]] adjusted mode: [ 4.146532] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"2560x1440" 60 241750 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [ 4.146563] [drm:intel_dump_pipe_config [i915]] crtc timings: 241750 2560 2608 2640 2720 1440 1443 1448 1481, type: 0x48 flags: 0xa [ 4.146593] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 2560x1440, pixel rate 241750 [ 4.146623] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 [ 4.146652] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 4.146682] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [ 4.146711] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: cfgcr0: 0x2000000, cfgcr1: 0x0 [ 4.146739] [drm:intel_dump_pipe_config [i915]] planes on this crtc [ 4.146768] [drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1 [ 4.146797] [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 2A] disabled, scaler_id = -1 [ 4.146825] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 3A] disabled, scaler_id = -1 [ 4.146853] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 4A] disabled, scaler_id = -1 [ 4.146881] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor A] disabled, scaler_id = -1 [ 4.146913] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 168000 kHz, actual 168000 kHz [ 4.146943] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 [ 4.146980] [drm:intel_find_shared_dpll [i915]] [CRTC:43:pipe A] allocated DPLL 0 [ 4.147011] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A [ 4.147062] [drm:intel_edp_backlight_off [i915]] [ 4.352156] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0 [ 4.352315] [drm:intel_disable_pipe [i915]] disabling pipe A [ 4.368677] [drm:intel_edp_panel_off.part.31 [i915]] Turn eDP port A panel power off [ 4.368830] [drm:intel_edp_panel_off.part.31 [i915]] Wait for panel power off time [ 4.369053] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000060 [ 4.369413] [drm:gen8_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010 [ 4.369447] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short [ 4.369610] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short [ 4.421198] [drm:gen8_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 4.421235] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 4.421270] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0 [ 4.421356] [drm:wait_panel_status [i915]] Wait complete [ 4.421388] [drm:intel_power_well_disable [i915]] disabling DDI A IO power well [ 4.421449] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 43 [ 4.421482] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 [ 4.421520] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 168000 kHz, VCO 672000 kHz, ref 24000 kHz, voltage level 0 [ 4.421659] [drm:intel_atomic_commit_tail [i915]] [ENCODER:76:DDI A] [ 4.421691] [drm:intel_atomic_commit_tail [i915]] [ENCODER:83:DDI B] [ 4.421723] [drm:intel_atomic_commit_tail [i915]] [ENCODER:85:DP-MST A] [ 4.421754] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:DP-MST B] [ 4.421785] [drm:intel_atomic_commit_tail [i915]] [ENCODER:87:DP-MST C] [ 4.421815] [drm:intel_atomic_commit_tail [i915]] [ENCODER:89:DDI C] [ 4.421845] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DDI D] [ 4.421875] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DP-MST A] [ 4.421904] [drm:intel_atomic_commit_tail [i915]] [ENCODER:95:DP-MST B] [ 4.421933] [drm:intel_atomic_commit_tail [i915]] [ENCODER:96:DP-MST C] [ 4.421963] [drm:verify_single_dpll_state.isra.114 [i915]] DPLL 0 [ 4.421994] [drm:verify_single_dpll_state.isra.114 [i915]] DPLL 1 [ 4.422024] [drm:verify_single_dpll_state.isra.114 [i915]] DPLL 2 [ 4.422058] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 43 [ 4.422088] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 [ 4.422199] [drm:edp_panel_on [i915]] Turn eDP port A panel power on [ 4.422274] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle [ 5.052589] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060 [ 5.052671] [drm:wait_panel_status [i915]] Wait complete [ 5.052820] [drm:edp_panel_on [i915]] Wait for panel power on [ 5.053041] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063 [ 5.103426] [drm:gen8_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010 [ 5.103465] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long [ 5.103501] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1 [ 5.255678] [drm:wait_panel_status [i915]] Wait complete [ 5.255715] [drm:intel_power_well_enable [i915]] enabling DDI A IO power well [ 5.255951] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on [ 5.256221] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b [ 5.257765] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 5.257794] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0 [ 5.257825] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1 [ 5.258707] [drm:intel_dp_start_link_train [i915]] clock recovery OK [ 5.258737] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2 [ 5.260110] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 5.260138] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 [ 5.261538] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0 [ 5.261565] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1 [ 5.262793] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful [ 5.262846] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:77:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 4 [ 5.263346] [drm:intel_enable_pipe [i915]] enabling pipe A [ 5.263386] [drm:intel_edp_backlight_on [i915]] [ 5.263417] [drm:intel_panel_enable_backlight [i915]] pipe A [ 5.263528] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 120000 [ 5.263821] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS [ 5.263855] [drm:intel_fbc_enable [i915]] reserved 29491200 bytes of contiguous stolen space for FBC, threshold: 1 [ 5.263886] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A [ 5.280228] [drm:verify_connector_state.isra.113 [i915]] [CONNECTOR:77:eDP-1] [ 5.280266] [drm:intel_atomic_commit_tail [i915]] [CRTC:43:pipe A] [ 5.280313] [drm:verify_single_dpll_state.isra.114 [i915]] DPLL 0 [ 5.280351] [drm:intel_enable_sagv [i915]] Enabling the SAGV [ 5.280370] Console: switching to colour frame buffer device 320x90 [ 5.297714] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 0a 84 41 00 00 01 01 02 00 00 00 00 0b 00 [ 5.298462] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A [ 5.298500] [drm:i915_hotplug_work_func [i915]] running encoder hotplug functions [ 5.298536] [drm:i915_hotplug_work_func [i915]] Connector eDP-1 (pin 4) received hotplug event. [ 5.298570] [drm:intel_dp_detect [i915]] [CONNECTOR:77:eDP-1] [ 5.298604] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.298635] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.298666] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.299299] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 5.304777] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.320162] [drm:drm_fb_helper_hotplug_event.part.32 [drm_kms_helper]] [ 5.320166] [drm:drm_setup_crtcs [drm_kms_helper]] [ 5.320172] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:77:eDP-1] [ 5.320214] [drm:intel_dp_detect [i915]] [CONNECTOR:77:eDP-1] [ 5.320249] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.320273] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.320297] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.320835] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 5.321838] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.321863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:77:eDP-1] probed modes : [ 5.321879] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"2560x1440" 60 241750 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [ 5.321886] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:DP-1] [ 5.321919] [drm:intel_dp_detect [i915]] [CONNECTOR:84:DP-1] [ 5.321948] [drm:intel_power_well_enable [i915]] enabling AUX B [ 5.321979] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 5.322081] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 5.322112] [drm:intel_power_well_disable [i915]] disabling AUX B [ 5.322145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:DP-1] disconnected [ 5.322151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:90:HDMI-A-1] [ 5.322185] [drm:intel_hdmi_detect [i915]] [CONNECTOR:90:HDMI-A-1] [ 5.322737] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.322766] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.323313] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.323328] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.323876] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.323904] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.324531] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.324537] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.324541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:90:HDMI-A-1] disconnected [ 5.324571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:DP-2] [ 5.324591] [drm:intel_dp_detect [i915]] [CONNECTOR:93:DP-2] [ 5.324608] [drm:intel_power_well_enable [i915]] enabling AUX D [ 5.324637] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 5.324758] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 5.324787] [drm:intel_power_well_disable [i915]] disabling AUX D [ 5.324820] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:DP-2] disconnected [ 5.324827] [drm:drm_setup_crtcs [drm_kms_helper]] connector 77 enabled? yes [ 5.324832] [drm:drm_setup_crtcs [drm_kms_helper]] connector 84 enabled? no [ 5.324838] [drm:drm_setup_crtcs [drm_kms_helper]] connector 90 enabled? no [ 5.324843] [drm:drm_setup_crtcs [drm_kms_helper]] connector 93 enabled? no [ 5.324875] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 5.324883] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 77 [ 5.324889] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 77 0 [ 5.324894] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 2560x1440 [ 5.324899] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 2560x1440 config [ 5.324906] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 2560x1440 set on crtc 43 (0,0) [ 5.330333] [drm:drm_fb_helper_hotplug_event.part.32 [drm_kms_helper]] [ 5.330361] [drm:drm_setup_crtcs [drm_kms_helper]] [ 5.330365] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:77:eDP-1] [ 5.330391] [drm:intel_dp_detect [i915]] [CONNECTOR:77:eDP-1] [ 5.330415] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 [ 5.330436] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 [ 5.330455] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 [ 5.330993] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 [ 5.331913] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found [ 5.331929] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:77:eDP-1] probed modes : [ 5.331939] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"2560x1440" 60 241750 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [ 5.331943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:DP-1] [ 5.331968] [drm:intel_dp_detect [i915]] [CONNECTOR:84:DP-1] [ 5.331985] [drm:intel_power_well_enable [i915]] enabling AUX B [ 5.332006] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 5.332157] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 5.332177] [drm:intel_power_well_disable [i915]] disabling AUX B [ 5.332255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:84:DP-1] disconnected [ 5.332259] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:90:HDMI-A-1] [ 5.332280] [drm:intel_hdmi_detect [i915]] [CONNECTOR:90:HDMI-A-1] [ 5.332813] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.332832] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.333369] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) [ 5.333379] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc [ 5.333917] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.333934] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry [ 5.334506] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) [ 5.334511] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID: (err -6) [ 5.334515] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:90:HDMI-A-1] disconnected [ 5.334519] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:DP-2] [ 5.334538] [drm:intel_dp_detect [i915]] [CONNECTOR:93:DP-2] [ 5.334554] [drm:intel_power_well_enable [i915]] enabling AUX D [ 5.334572] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 5.334801] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 5.334820] [drm:intel_power_well_disable [i915]] disabling AUX D [ 5.334889] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:93:DP-2] disconnected [ 5.334893] [drm:drm_setup_crtcs [drm_kms_helper]] connector 77 enabled? yes [ 5.334896] [drm:drm_setup_crtcs [drm_kms_helper]] connector 84 enabled? no [ 5.334900] [drm:drm_setup_crtcs [drm_kms_helper]] connector 90 enabled? no [ 5.334903] [drm:drm_setup_crtcs [drm_kms_helper]] connector 93 enabled? no [ 5.334925] [drm:intel_fb_initial_config [i915]] Not using firmware configuration [ 5.334929] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 77 [ 5.334933] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 77 0 [ 5.334936] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 2560x1440 [ 5.334940] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 2560x1440 config [ 5.334977] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 2560x1440 set on crtc 43 (0,0) [ 5.351143] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.425165] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.447228] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 5.464201] systemd[1]: Detected architecture x86-64. [ 5.464484] systemd[1]: Set hostname to . [ 5.524787] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.524924] systemd[1]: Created slice System Slice. [ 5.524992] systemd[1]: Created slice User and Session Slice. [ 5.525023] systemd[1]: Listening on Journal Socket. [ 5.525373] systemd[1]: Starting Uncomplicated firewall... [ 5.525760] systemd[1]: Mounting Huge Pages File System... [ 5.525944] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.545371] lp: driver loaded but no devices found [ 5.548280] ppdev: user-space parallel port driver [ 5.591298] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null) [ 5.597729] systemd-journald[231]: Received request to flush runtime journal from PID 1 [ 5.739155] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 5.744253] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=120000/120000 [ 5.744278] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 120000 [ 5.761732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.770097] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.776621] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 5.782447] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.783245] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.783247] cfg80211: failed to load regulatory.db [ 5.802017] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 5.802582] Bluetooth: Core ver 2.22 [ 5.802610] NET: Registered protocol family 31 [ 5.802611] Bluetooth: HCI device and connection manager initialized [ 5.802614] Bluetooth: HCI socket layer initialized [ 5.802616] Bluetooth: L2CAP socket layer initialized [ 5.802622] Bluetooth: SCO socket layer initialized [ 5.809589] Adding 16642044k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:16642044k SSFS [ 5.812993] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5.825792] Intel(R) Wireless WiFi driver for Linux [ 5.825794] Copyright(c) 2003- 2015 Intel Corporation [ 5.826033] usbcore: registered new interface driver btusb [ 5.831858] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015 [ 5.833528] Bluetooth: hci0: Device revision is 2 [ 5.833530] Bluetooth: hci0: Secure boot is enabled [ 5.833531] Bluetooth: hci0: OTP lock is disabled [ 5.833531] Bluetooth: hci0: API lock is disabled [ 5.833532] Bluetooth: hci0: Debug lock is disabled [ 5.833534] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.833778] bluetooth hci0: Direct firmware load for intel/ibt-17-16-1.sfi failed with error -2 [ 5.833780] Bluetooth: hci0: Failed to load Intel firmware file (-2) [ 5.856513] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 5.858156] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-9000-pu-b0-jf-b0-34.ucode failed with error -2 [ 5.858168] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-9000-pu-b0-jf-b0-33.ucode failed with error -2 [ 5.858177] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-9000-pu-b0-jf-b0-32.ucode failed with error -2 [ 5.858186] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-9000-pu-b0-jf-b0-31.ucode failed with error -2 [ 5.858194] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-9000-pu-b0-jf-b0-30.ucode failed with error -2 [ 5.858196] iwlwifi 0000:00:14.3: no suitable firmware found! [ 5.858239] iwlwifi 0000:00:14.3: minimum version required: iwlwifi-9000-pu-b0-jf-b0-30 [ 5.858284] iwlwifi 0000:00:14.3: maximum version supported: iwlwifi-9000-pu-b0-jf-b0-34 [ 5.858331] iwlwifi 0000:00:14.3: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git [ 5.858578] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 5.858941] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 5.859655] AVX2 version of gcm_enc/dec engaged. [ 5.859656] AES CTR mode by8 optimization enabled [ 5.926976] audit: type=1400 audit(1512637907.423:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=525 comm="apparmor_parser" [ 5.926979] audit: type=1400 audit(1512637907.423:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=525 comm="apparmor_parser" [ 5.937938] audit: type=1400 audit(1512637907.435:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=529 comm="apparmor_parser" [ 5.939206] audit: type=1400 audit(1512637907.435:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser" [ 5.939209] audit: type=1400 audit(1512637907.435:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser" [ 5.939211] audit: type=1400 audit(1512637907.435:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=526 comm="apparmor_parser" [ 5.939212] audit: type=1400 audit(1512637907.435:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser" [ 5.947444] audit: type=1400 audit(1512637907.443:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=535 comm="apparmor_parser" [ 5.947447] audit: type=1400 audit(1512637907.443:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=535 comm="apparmor_parser" [ 5.948869] audit: type=1400 audit(1512637907.447:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=531 comm="apparmor_parser" [ 5.964944] random: crng init done [ 5.976865] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) [ 6.011061] new mount options do not match the existing superblock, will be ignored [ 6.023642] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002) [ 6.024704] idma64 idma64.3: Found Intel integrated DMA 64-bit [ 6.024913] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 6.025145] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.043255] [drm:intel_power_well_enable [i915]] enabling power well 2 [ 6.091805] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC700: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 6.091809] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.091812] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.091815] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.091817] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.091821] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 6.157476] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 [ 6.157543] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 6.157601] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 6.184438] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.208346] dw-apb-uart.3: ttyS4 at MMIO 0xa1246000 (irq = 20, base_baud = 7500000) is a 16550A [ 6.238795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.238797] Bluetooth: BNEP filters: protocol multicast [ 6.238800] Bluetooth: BNEP socket layer initialized [ 6.403848] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 6.620492] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 7.048003] asix 1-4:1.0 eth0: register 'asix' at usb-0000:00:14.0-4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:94:90 [ 7.048070] usbcore: registered new interface driver asix [ 7.052898] asix 1-4:1.0 enx001060319490: renamed from eth0 [ 7.087844] IPv6: ADDRCONF(NETDEV_UP): enx001060319490: link is not ready [ 7.230152] [drm:intel_power_well_disable [i915]] disabling power well 2 [ 8.412425] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off [ 8.412654] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 [ 8.412695] [drm:intel_power_well_disable [i915]] disabling DC off [ 8.412736] [drm:skl_enable_dc6 [i915]] Enabling DC6 [ 8.412773] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 [ 8.412812] [drm:intel_power_well_disable [i915]] disabling AUX A [ 9.107782] IPv6: ADDRCONF(NETDEV_CHANGE): enx001060319490: link becomes ready [ 9.110832] asix 1-4:1.0 enx001060319490: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 694.984557] Console: switching to colour dummy device 80x25 [ 694.984629] [IGT] gem_ctx_switch: executing [ 695.016779] Setting dangerous option reset - tainting kernel [ 695.017295] [IGT] gem_ctx_switch: starting subtest blt-interruptible [ 845.138903] [IGT] gem_ctx_switch: exiting, ret=0 [ 855.862183] [IGT] gem_ctx_switch: executing [ 855.904826] Setting dangerous option reset - tainting kernel [ 870.781085] [IGT] gem_ctx_switch: executing [ 870.816703] Setting dangerous option reset - tainting kernel [ 870.817234] [IGT] gem_ctx_switch: starting subtest bsd-interruptible [ 992.833753] [drm] GPU HANG: ecode 10:2:0xfffffffe, reason: Hang on vcs0, action: reset [ 992.833755] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 992.833755] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 992.833756] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 992.833756] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 992.833757] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 992.833901] [drm:i915_reset_device [i915]] resetting chip [ 992.833916] i915 0000:00:02.0: Resetting chip after gpu hang [ 992.834270] [drm:gen8_init_common_ring [i915]] Execlists enabled for rcs0 [ 992.834294] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 6 [ 992.834362] [drm:gen8_init_common_ring [i915]] Execlists enabled for bcs0 [ 992.834429] [drm:gen8_init_common_ring [i915]] Execlists enabled for vcs0 [ 992.834497] [drm:gen8_init_common_ring [i915]] Execlists enabled for vecs0 [ 992.839797] [IGT] gem_ctx_switch: exiting, ret=99 [ 1019.689695] [IGT] gem_ctx_switch: executing [ 1019.728720] Setting dangerous option reset - tainting kernel [ 1019.729205] [IGT] gem_ctx_switch: starting subtest forked-bsd [ 1169.860664] [IGT] gem_ctx_switch: exiting, ret=0