[ 0.000000] Linux version 4.15.2-gentoo (root@tethys) (gcc version 7.3.0 (Gentoo 7.3.0 p1.0)) #3 SMP Fri Feb 9 09:58:55 PST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.2-gentoo root=/dev/sys/gentoo ro spectre_v2=off hugepagesz=1G hugepages=32 default_hugepagesz=1G vfio_pci.ids=10de:17c8,10de:0fb0,1912:0014 kvm.ignore_msrs=1 kvm_intel.nested=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 acpi_enforce_resources=lax intremap=no_x2apic_optout libata.fua=1 init=/lib/systemd/systemd scandelay=3 dolvm quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007002ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070030000-0x0000000070030fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000070031000-0x0000000070031fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000070032000-0x0000000078d02fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078d03000-0x000000007a466fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a467000-0x000000007a4a9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007a4aa000-0x000000007a89bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a89c000-0x000000007b238fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b239000-0x000000007b2a1fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007b2a2000-0x000000007b2fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b300000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000107effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by American Megatrends [ 0.000000] efi: ESRT=0x7b1add98 ACPI=0x7a474000 ACPI 2.0=0x7a474000 SMBIOS=0x7b1ab000 SMBIOS 3.0=0x7b1aa000 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: System manufacturer System Product Name/Z170-A, BIOS 3504 06/29/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x107f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable [ 0.000000] 3 base 2000000000 mask 7000000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: last_pfn = 0x7b300 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x000000007b1add98 to 0x000000007b1addd0. [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x7f1722000, 0x7f1722fff] PGTABLE [ 0.000000] BRK [0x7f1723000, 0x7f1723fff] PGTABLE [ 0.000000] BRK [0x7f1724000, 0x7f1724fff] PGTABLE [ 0.000000] BRK [0x7f1725000, 0x7f1725fff] PGTABLE [ 0.000000] BRK [0x7f1726000, 0x7f1726fff] PGTABLE [ 0.000000] BRK [0x7f1727000, 0x7f1727fff] PGTABLE [ 0.000000] BRK [0x7f1728000, 0x7f1728fff] PGTABLE [ 0.000000] BRK [0x7f1729000, 0x7f1729fff] PGTABLE [ 0.000000] BRK [0x7f172a000, 0x7f172afff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x37273000-0x37930fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000007A474000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000007A4740A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000007A49E3B0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000007A474210 02A19D (v02 ALASKA A M I 01072009 INTL 20160422) [ 0.000000] ACPI: FACS 0x000000007A89BC40 000040 [ 0.000000] ACPI: APIC 0x000000007A49E4C8 0000BC (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000007A49E588 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DMAR 0x000000007A4A9000 0000B0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.000000] ACPI: MCFG 0x000000007A49E628 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000007A49E668 000390 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.000000] ACPI: FIDT 0x000000007A49E9F8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x000000007A49EA98 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007A4A1BF0 00253E (v02 PegSsd PegSsdt 00001000 INTL 20160422) [ 0.000000] ACPI: HPET 0x000000007A4A4130 000038 (v01 INTEL SKL 00000001 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007A4A4168 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007A4A4190 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422) [ 0.000000] ACPI: UEFI 0x000000007A4A4CA8 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SSDT 0x000000007A4A4CF0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.000000] ACPI: LPIT 0x000000007A4A5BD0 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.000000] ACPI: WSMT 0x000000007A4A5C68 000028 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000007A4A5C90 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.000000] ACPI: SSDT 0x000000007A4A5F30 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.000000] ACPI: DBGP 0x000000007A4A8F38 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000007A4A8F70 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.000000] ACPI: BGRT 0x000000007A4A8FC8 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000001000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000107effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000008ffff] [ 0.000000] node 0: [mem 0x0000000000091000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007002ffff] [ 0.000000] node 0: [mem 0x0000000070032000-0x0000000078d02fff] [ 0.000000] node 0: [mem 0x000000007b2a2000-0x000000007b2fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000107effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000107effffff] [ 0.000000] On node 0 totalpages: 16743674 [ 0.000000] DMA32 zone: 7732 pages used for memmap [ 0.000000] DMA32 zone: 22 pages reserved [ 0.000000] DMA32 zone: 494842 pages, LIFO batch:31 [ 0.000000] Normal zone: 253888 pages used for memmap [ 0.000000] Normal zone: 16248832 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 99 pages [ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 42 pages/cpu @ (ptrval) s131608 r8192 d32232 u262144 [ 0.000000] pcpu-alloc: s131608 r8192 d32232 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16482032 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.2-gentoo root=/dev/sys/gentoo ro spectre_v2=off hugepagesz=1G hugepages=32 default_hugepagesz=1G vfio_pci.ids=10de:17c8,10de:0fb0,1912:0014 kvm.ignore_msrs=1 kvm_intel.nested=1 i915.enable_guc_loading=1 i915.enable_guc_submission=1 acpi_enforce_resources=lax intremap=no_x2apic_optout libata.fua=1 init=/lib/systemd/systemd scandelay=3 dolvm quiet [ 0.000000] Setting dangerous option i915.enable_guc_loading - tainting kernel [ 0.000000] Setting dangerous option i915.enable_guc_submission - tainting kernel [ 0.000000] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.000000] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.000000] Memory: 32029208K/66974696K available (12316K kernel code, 558K rwdata, 2668K rodata, 892K init, 428K bss, 34945488K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.003333] APIC: Switch to symmetric I/O mode setup [ 0.003333] DMAR: Host address width 39 [ 0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.003333] DMAR: RMRR base: 0x000000793cf000 end: 0x000000793eefff [ 0.003333] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff [ 0.003333] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.003333] x2apic enabled [ 0.003333] Switched APIC routing to cluster x2apic. [ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019999] tsc: Detected 4000.000 MHz processor [ 0.019999] tsc: Detected 4008.000 MHz TSC [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 8019.00 BogoMIPS (lpj=13360000) [ 0.019999] pid_max: default: 32768 minimum: 301 [ 0.019999] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.019999] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.019999] CPU: Physical Processor ID: 0 [ 0.019999] CPU: Processor Core ID: 0 [ 0.019999] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.019999] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.019999] mce: CPU supports 10 MCE banks [ 0.019999] CPU0: Thermal monitoring enabled (TM1) [ 0.019999] process: using mwait in idle threads [ 0.019999] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.019999] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.019999] Spectre V2 : off selected on command line. [ 0.019999] Freeing SMP alternatives memory: 32K [ 0.025160] TSC deadline timer enabled [ 0.025165] smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.025187] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.025205] ... version: 4 [ 0.025205] ... bit width: 48 [ 0.025205] ... generic registers: 4 [ 0.025205] ... value mask: 0000ffffffffffff [ 0.025206] ... max period: 00007fffffffffff [ 0.025206] ... fixed-purpose events: 3 [ 0.025206] ... event mask: 000000070000000f [ 0.025225] Hierarchical SRCU implementation. [ 0.025282] smp: Bringing up secondary CPUs ... [ 0.025302] x86: Booting SMP configuration: [ 0.025303] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.025614] smp: Brought up 1 node, 8 CPUs [ 0.025614] smpboot: Max logical packages: 1 [ 0.025614] smpboot: Total of 8 processors activated (64153.00 BogoMIPS) [ 0.027462] devtmpfs: initialized [ 0.027462] PM: Registering ACPI NVS region [mem 0x70030000-0x70030fff] (4096 bytes) [ 0.027462] PM: Registering ACPI NVS region [mem 0x7a4aa000-0x7a89bfff] (4136960 bytes) [ 0.027462] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.027462] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.027462] xor: automatically using best checksumming function avx [ 0.027462] NET: Registered protocol family 16 [ 0.027503] cpuidle: using governor menu [ 0.027503] ACPI: bus type PCI registered [ 0.027503] PCI: Using configuration type 1 for base access [ 0.063333] HugeTLB registered 1.00 GiB page size, pre-allocated 32 pages [ 0.120009] raid6: sse2x1 gen() 14786 MB/s [ 0.176677] raid6: sse2x1 xor() 10978 MB/s [ 0.233348] raid6: sse2x2 gen() 18278 MB/s [ 0.290017] raid6: sse2x2 xor() 12574 MB/s [ 0.346690] raid6: sse2x4 gen() 21431 MB/s [ 0.403357] raid6: sse2x4 xor() 13520 MB/s [ 0.460027] raid6: avx2x1 gen() 30048 MB/s [ 0.516698] raid6: avx2x1 xor() 21396 MB/s [ 0.573369] raid6: avx2x2 gen() 36307 MB/s [ 0.630039] raid6: avx2x2 xor() 23675 MB/s [ 0.686709] raid6: avx2x4 gen() 42619 MB/s [ 0.743380] raid6: avx2x4 xor() 25364 MB/s [ 0.743381] raid6: using algorithm avx2x4 gen() 42619 MB/s [ 0.743381] raid6: .... xor() 25364 MB/s, rmw enabled [ 0.743381] raid6: using avx2x2 recovery algorithm [ 0.746668] ACPI: Added _OSI(Module Device) [ 0.746668] ACPI: Added _OSI(Processor Device) [ 0.746668] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.746668] ACPI: Added _OSI(Processor Aggregator Device) [ 0.746809] ACPI: Executed 35 blocks of module-level executable AML code [ 0.753418] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.755855] ACPI: Dynamic OEM Table Load: [ 0.755859] ACPI: SSDT 0xFFFF8AA63801C800 0007DD (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.755949] ACPI: Executed 1 blocks of module-level executable AML code [ 0.755991] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.756723] ACPI: Dynamic OEM Table Load: [ 0.756725] ACPI: SSDT 0xFFFF8AA637814E00 000130 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.756796] ACPI: Executed 1 blocks of module-level executable AML code [ 0.756836] ACPI: Dynamic OEM Table Load: [ 0.756838] ACPI: SSDT 0xFFFF8AA637814600 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.756904] ACPI: Executed 1 blocks of module-level executable AML code [ 0.757094] ACPI: Dynamic OEM Table Load: [ 0.757096] ACPI: SSDT 0xFFFF8AA63768E800 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.757283] ACPI: Executed 1 blocks of module-level executable AML code [ 0.757363] ACPI: Dynamic OEM Table Load: [ 0.757366] ACPI: SSDT 0xFFFF8AA637817400 000197 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.757444] ACPI: Executed 1 blocks of module-level executable AML code [ 0.759466] ACPI: Interpreter enabled [ 0.759487] ACPI: (supports S0 S3 S5) [ 0.759488] ACPI: Using IOAPIC for interrupt routing [ 0.759508] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.760083] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.761681] ACPI: Power Resource [PG00] (on) [ 0.761891] ACPI: Power Resource [PG01] (on) [ 0.762090] ACPI: Power Resource [PG02] (on) [ 0.763691] ACPI: Power Resource [WRST] (on) [ 0.763907] ACPI: Power Resource [WRST] (on) [ 0.764121] ACPI: Power Resource [WRST] (on) [ 0.764338] ACPI: Power Resource [WRST] (on) [ 0.764554] ACPI: Power Resource [WRST] (on) [ 0.764767] ACPI: Power Resource [WRST] (on) [ 0.764980] ACPI: Power Resource [WRST] (on) [ 0.765201] ACPI: Power Resource [WRST] (on) [ 0.765416] ACPI: Power Resource [WRST] (on) [ 0.765629] ACPI: Power Resource [WRST] (on) [ 0.765842] ACPI: Power Resource [WRST] (on) [ 0.766055] ACPI: Power Resource [WRST] (on) [ 0.766268] ACPI: Power Resource [WRST] (on) [ 0.766534] ACPI: Power Resource [WRST] (on) [ 0.766755] ACPI: Power Resource [WRST] (on) [ 0.766975] ACPI: Power Resource [WRST] (on) [ 0.767188] ACPI: Power Resource [WRST] (on) [ 0.768043] ACPI: Power Resource [WRST] (on) [ 0.768256] ACPI: Power Resource [WRST] (on) [ 0.768469] ACPI: Power Resource [WRST] (on) [ 0.777455] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.777457] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.777507] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.777892] PCI host bridge to bus 0000:00 [ 0.777893] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.777893] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.777894] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.777895] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.777895] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.777896] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.777896] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.777897] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.777897] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.777898] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.777898] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.777899] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.777899] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff window] [ 0.777900] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.777900] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.777905] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000 [ 0.778097] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.778120] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.778199] pci 0000:00:01.1: [8086:1905] type 01 class 0x060400 [ 0.778221] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.778315] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000 [ 0.778320] pci 0000:00:02.0: reg 0x10: [mem 0x2ffe000000-0x2ffeffffff 64bit] [ 0.778323] pci 0000:00:02.0: reg 0x18: [mem 0x2fe0000000-0x2fefffffff 64bit pref] [ 0.778326] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.778449] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.778466] pci 0000:00:14.0: reg 0x10: [mem 0x2fff010000-0x2fff01ffff 64bit] [ 0.778516] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.778649] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.778668] pci 0000:00:16.0: reg 0x10: [mem 0x2fff025000-0x2fff025fff 64bit] [ 0.778723] pci 0000:00:16.0: PME# supported from D3hot [ 0.778815] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.778828] pci 0000:00:17.0: reg 0x10: [mem 0xdf424000-0xdf425fff] [ 0.778833] pci 0000:00:17.0: reg 0x14: [mem 0xdf427000-0xdf4270ff] [ 0.778838] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.778843] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.778848] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.778853] pci 0000:00:17.0: reg 0x24: [mem 0xdf426000-0xdf4267ff] [ 0.778883] pci 0000:00:17.0: PME# supported from D3hot [ 0.778960] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400 [ 0.779001] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.779104] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 0.779144] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.779225] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400 [ 0.779265] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.779360] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 [ 0.779405] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.779509] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100 [ 0.779672] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.779683] pci 0000:00:1f.2: reg 0x10: [mem 0xdf420000-0xdf423fff] [ 0.779785] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.779805] pci 0000:00:1f.3: reg 0x10: [mem 0x2fff020000-0x2fff023fff 64bit] [ 0.779825] pci 0000:00:1f.3: reg 0x20: [mem 0x2fff000000-0x2fff00ffff 64bit] [ 0.779862] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.779977] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.780032] pci 0000:00:1f.4: reg 0x10: [mem 0x2fff024000-0x2fff0240ff 64bit] [ 0.780101] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.780249] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 [ 0.780271] pci 0000:00:1f.6: reg 0x10: [mem 0xdf400000-0xdf41ffff] [ 0.780361] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.780451] pci 0000:01:00.0: [10de:17c8] type 00 class 0x030000 [ 0.780461] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff] [ 0.780469] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.780476] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.780482] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.780487] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref] [ 0.780538] pci 0000:01:00.1: [10de:0fb0] type 00 class 0x040300 [ 0.780546] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff] [ 0.780616] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.780617] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.780618] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.780620] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.780692] pci 0000:02:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.780708] pci 0000:02:00.0: reg 0x10: [mem 0xdf300000-0xdf301fff 64bit] [ 0.780776] pci 0000:02:00.0: PME# supported from D0 D3hot [ 0.790059] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.790061] pci 0000:00:01.1: bridge window [mem 0xdf300000-0xdf3fffff] [ 0.790090] pci 0000:03:00.0: [8086:0953] type 00 class 0x010802 [ 0.790103] pci 0000:03:00.0: reg 0x10: [mem 0xdf210000-0xdf213fff 64bit] [ 0.790129] pci 0000:03:00.0: reg 0x30: [mem 0xdf200000-0xdf20ffff pref] [ 0.790133] pci 0000:03:00.0: enabling Extended Tags [ 0.800006] pci 0000:00:1b.0: PCI bridge to [bus 03] [ 0.800009] pci 0000:00:1b.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.800044] pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330 [ 0.800063] pci 0000:04:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit] [ 0.800108] pci 0000:04:00.0: enabling Extended Tags [ 0.800155] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.800206] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.800208] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.800244] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400 [ 0.800347] pci 0000:05:00.0: supports D1 D2 [ 0.800348] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.810008] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 0.810103] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.810146] pci 0000:00:1d.0: PCI bridge to [bus 07] [ 0.810166] pci_bus 0000:00: on NUMA node 0 [ 0.811387] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811446] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811475] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811505] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811534] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811565] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811594] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.811787] SCSI subsystem initialized [ 0.811791] libata version 3.00 loaded. [ 0.811793] ACPI: bus type USB registered [ 0.811799] usbcore: registered new interface driver usbfs [ 0.811802] usbcore: registered new interface driver hub [ 0.811811] usbcore: registered new device driver usb [ 0.811814] Linux video capture interface: v2.00 [ 0.811816] pps_core: LinuxPPS API ver. 1 registered [ 0.811816] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.811817] PTP clock support registered [ 0.811824] Registered efivars operations [ 0.830922] Advanced Linux Sound Architecture Driver Initialized. [ 0.830926] PCI: Using ACPI for IRQ routing [ 0.830926] PCI: pci_cache_line_size set to 64 bytes [ 0.830971] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.830972] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.830972] e820: reserve RAM buffer [mem 0x70030000-0x73ffffff] [ 0.830972] e820: reserve RAM buffer [mem 0x78d03000-0x7bffffff] [ 0.830973] e820: reserve RAM buffer [mem 0x7b300000-0x7bffffff] [ 0.830974] e820: reserve RAM buffer [mem 0x107f000000-0x107fffffff] [ 0.831150] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.831152] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.833192] clocksource: Switched to clocksource hpet [ 0.833227] pnp: PnP ACPI init [ 0.833227] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.833227] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833227] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.833227] system 00:01: [io 0xffff] has been reserved [ 0.833227] system 00:01: [io 0xffff] has been reserved [ 0.833227] system 00:01: [io 0xffff] has been reserved [ 0.833227] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.833227] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.833227] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833227] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.833227] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833227] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.833227] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.833227] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.833227] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.833227] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.833227] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.833227] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.833227] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.833227] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.833227] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.833227] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.833227] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.833227] system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved [ 0.833227] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833227] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.833227] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.833227] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.833227] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.833227] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.833227] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.833227] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.833227] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.833227] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.833227] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.833227] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833227] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.833227] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833406] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.833407] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.833407] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.833409] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.833901] pnp: PnP ACPI: found 9 devices [ 0.838422] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.838451] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.838453] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000 [ 0.838453] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000 [ 0.838457] pci 0000:00:1d.0: BAR 14: assigned [mem 0x80000000-0x801fffff] [ 0.838461] pci 0000:00:1d.0: BAR 15: assigned [mem 0x2000000000-0x20001fffff 64bit pref] [ 0.838462] pci 0000:00:1d.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.838463] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.838464] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.838465] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff] [ 0.838466] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.838468] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.838470] pci 0000:00:01.1: bridge window [mem 0xdf300000-0xdf3fffff] [ 0.838472] pci 0000:00:1b.0: PCI bridge to [bus 03] [ 0.838474] pci 0000:00:1b.0: bridge window [mem 0xdf200000-0xdf2fffff] [ 0.838478] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.838480] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff] [ 0.838484] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.838497] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 0.838502] pci 0000:00:1d.0: PCI bridge to [bus 07] [ 0.838503] pci 0000:00:1d.0: bridge window [io 0x2000-0x2fff] [ 0.838506] pci 0000:00:1d.0: bridge window [mem 0x80000000-0x801fffff] [ 0.838507] pci 0000:00:1d.0: bridge window [mem 0x2000000000-0x20001fffff 64bit pref] [ 0.838511] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.838511] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.838512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.838512] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.838513] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.838514] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.838514] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.838515] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.838515] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.838516] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.838516] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.838517] pci_bus 0000:00: resource 15 [mem 0x80000000-0xdfffffff window] [ 0.838517] pci_bus 0000:00: resource 16 [mem 0x2000000000-0x2fffffffff window] [ 0.838518] pci_bus 0000:00: resource 17 [mem 0xfd000000-0xfe7fffff window] [ 0.838518] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.838519] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff] [ 0.838519] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.838520] pci_bus 0000:02: resource 1 [mem 0xdf300000-0xdf3fffff] [ 0.838521] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff] [ 0.838521] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff] [ 0.838522] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] [ 0.838522] pci_bus 0000:07: resource 1 [mem 0x80000000-0x801fffff] [ 0.838523] pci_bus 0000:07: resource 2 [mem 0x2000000000-0x20001fffff 64bit pref] [ 0.838596] NET: Registered protocol family 2 [ 0.838648] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.838979] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.839068] TCP: Hash tables configured (established 524288 bind 65536) [ 0.839084] UDP hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.839161] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.839252] NET: Registered protocol family 1 [ 0.839259] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.839598] PCI: CLS 0 bytes, default 64 [ 0.839611] Unpacking initramfs... [ 1.252809] Freeing initrd memory: 6904K [ 1.252825] DMAR: [Firmware Bug]: RMRR entry for device 04:00.0 is broken - applying workaround [ 1.252826] DMAR: No ATSR found [ 1.252848] DMAR: dmar0: Using Queued invalidation [ 1.252850] DMAR: dmar1: Using Queued invalidation [ 1.253028] DMAR: Setting RMRR: [ 1.253053] DMAR: Setting identity map for device 0000:00:02.0 [0x7b800000 - 0x7fffffff] [ 1.253078] DMAR: Setting identity map for device 0000:00:14.0 [0x793cf000 - 0x793eefff] [ 1.253113] DMAR: Setting identity map for device 0000:04:00.0 [0x793cf000 - 0x793eefff] [ 1.253116] DMAR: Prepare 0-16MiB unity mapping for LPC [ 1.253139] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 1.253147] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.253171] iommu: Adding device 0000:00:00.0 to group 0 [ 1.253179] iommu: Adding device 0000:00:01.0 to group 1 [ 1.253183] iommu: Adding device 0000:00:01.1 to group 1 [ 1.253186] iommu: Adding device 0000:00:02.0 to group 2 [ 1.253192] iommu: Adding device 0000:00:14.0 to group 3 [ 1.253197] iommu: Adding device 0000:00:16.0 to group 4 [ 1.253200] iommu: Adding device 0000:00:17.0 to group 5 [ 1.253205] iommu: Adding device 0000:00:1b.0 to group 6 [ 1.253212] iommu: Adding device 0000:00:1c.0 to group 7 [ 1.253216] iommu: Adding device 0000:00:1c.2 to group 7 [ 1.253221] iommu: Adding device 0000:00:1d.0 to group 8 [ 1.253230] iommu: Adding device 0000:00:1f.0 to group 9 [ 1.253234] iommu: Adding device 0000:00:1f.2 to group 9 [ 1.253237] iommu: Adding device 0000:00:1f.3 to group 9 [ 1.253242] iommu: Adding device 0000:00:1f.4 to group 9 [ 1.253245] iommu: Adding device 0000:00:1f.6 to group 10 [ 1.253247] iommu: Adding device 0000:01:00.0 to group 1 [ 1.253249] iommu: Adding device 0000:01:00.1 to group 1 [ 1.253251] iommu: Adding device 0000:02:00.0 to group 1 [ 1.253253] iommu: Adding device 0000:03:00.0 to group 6 [ 1.253255] iommu: Adding device 0000:04:00.0 to group 7 [ 1.253257] iommu: Adding device 0000:05:00.0 to group 7 [ 1.254196] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 1.254196] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 1.254197] RAPL PMU: hw unit of domain package 2^-14 Joules [ 1.254197] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 1.254197] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 1.254198] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 1.254837] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns [ 1.255926] workingset: timestamp_bits=46 max_order=24 bucket_order=0 [ 1.256321] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.257484] NET: Registered protocol family 38 [ 1.257494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.257495] io scheduler noop registered (default) [ 1.257506] io scheduler bfq registered [ 1.258100] Non-volatile memory driver v1.3 [ 1.258101] Linux agpgart interface v0.103 [ 1.258107] intel_idle: MWAIT substates: 0x142120 [ 1.258107] intel_idle: v0.4.1 model 0x5E [ 1.258368] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.258396] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.258403] ACPI: Sleep Button [SLPB] [ 1.258416] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.258422] ACPI: Power Button [PWRB] [ 1.258433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.258452] ACPI: Power Button [PWRF] [ 1.261566] [drm] Memory usable by graphics device = 4078M [ 1.261567] [drm] VT-d active for gfx access [ 1.261567] [drm] Replacing VGA console driver [ 1.266846] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.266846] [drm] Driver supports precise vblank timestamp query. [ 1.269288] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) [ 1.269501] [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled [ 1.276804] [drm] HuC: Loaded firmware i915/skl_huc_ver01_07_1398.bin (version 1.7) [ 1.286831] [drm] GuC: Loaded firmware i915/skl_guc_ver6_1.bin (version 6.1) [ 1.300199] i915 0000:00:02.0: GuC submission enabled (firmware i915/skl_guc_ver6_1.bin [version 6.1]) [ 1.300453] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 1.301708] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.302038] acpi device:0f: registered as cooling_device8 [ 1.302083] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.302528] loop: module loaded [ 1.302616] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 1.302667] nvme nvme0: pci function 0000:03:00.0 [ 1.316394] ahci 0000:00:17.0: version 3.0 [ 1.326689] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.326690] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst [ 1.357349] scsi host0: ahci [ 1.357675] scsi host1: ahci [ 1.358069] scsi host2: ahci [ 1.358324] scsi host3: ahci [ 1.358352] ata1: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426100 irq 29 [ 1.358353] ata2: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426180 irq 29 [ 1.358354] ata3: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426200 irq 29 [ 1.358355] ata4: SATA max UDMA/133 abar m2048@0xdf426000 port 0xdf426280 irq 29 [ 1.358371] tun: Universal TUN/TAP device driver, 1.6 [ 1.358436] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.358436] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.358573] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.373019] fbcon: inteldrmfb (fb0) is primary device [ 1.438897] Console: switching to colour frame buffer device 480x135 [ 1.455405] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.671641] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.671661] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.671680] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.671699] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.672180] ata1.00: ATA-9: M4-CT256M4SSD3, 07MH, max UDMA/100 [ 1.672180] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.672295] ata3.00: ATA-10: WDC WD6001F4PZ-49CWHM0, 01.0RAE1, max UDMA/133 [ 1.672295] ata3.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.672747] ata1.00: configured for UDMA/100 [ 1.672863] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD3 07MH PQ: 0 ANSI: 5 [ 1.672953] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.672956] sd 0:0:0:0: [sda] Write Protect is off [ 1.672956] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10 [ 1.672965] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.673186] ata3.00: configured for UDMA/133 [ 1.674940] sda: sda1 sda2 sda3 sda4 [ 1.675077] ata4.00: ATAPI: ASUS DRW-24F1ST c, 1.00, max UDMA/133 [ 1.675490] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.675992] ata4.00: configured for UDMA/133 [ 1.692220] ata2.00: ATA-10: WDC WD6001FXYZ-01SUYB1, ER43, max UDMA/133 [ 1.692221] ata2.00: 1465130646 sectors, multi 2: LBA48 NCQ (depth 31/32), AA [ 1.708291] ata2.00: configured for UDMA/133 [ 1.708383] scsi 1:0:0:0: Direct-Access ATA WDC WD6001FXYZ-0 ER43 PQ: 0 ANSI: 5 [ 1.708494] sd 1:0:0:0: [sdb] 1465130646 4096-byte logical blocks: (6.00 TB/5.46 TiB) [ 1.708496] sd 1:0:0:0: [sdb] Write Protect is off [ 1.708497] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 10 [ 1.708500] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.708603] scsi 2:0:0:0: Direct-Access ATA WDC WD6001F4PZ-4 RAE1 PQ: 0 ANSI: 5 [ 1.708689] sd 2:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 1.708690] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.708692] sd 2:0:0:0: [sdc] Write Protect is off [ 1.708693] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 10 [ 1.708695] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.712039] scsi 3:0:0:0: CD-ROM ASUS DRW-24F1ST c 1.00 PQ: 0 ANSI: 5 [ 1.738281] sdb: sdb1 sdb2 [ 1.738746] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.742844] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.742845] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.742946] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.777561] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.779836] sdc: sdc1 [ 1.780123] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.864193] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f8:32:e4:6e:c7:c6 [ 1.864194] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.864271] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.864330] VFIO - User Level meta-driver version: 0.3 [ 1.880169] vfio_pci: add [10de:17c8[ffff:ffff]] class 0x000000/00000000 [ 1.896837] vfio_pci: add [10de:0fb0[ffff:ffff]] class 0x000000/00000000 [ 1.913954] vfio_pci: add [1912:0014[ffff:ffff]] class 0x000000/00000000 [ 1.914052] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.914055] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.915140] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.915143] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.915308] hub 1-0:1.0: USB hub found [ 1.915320] hub 1-0:1.0: 16 ports detected [ 1.916113] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.916115] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.916195] hub 2-0:1.0: USB hub found [ 1.916204] hub 2-0:1.0: 10 ports detected [ 1.916879] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.916882] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.975638] xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010 [ 1.975859] hub 3-0:1.0: USB hub found [ 1.975863] hub 3-0:1.0: 2 ports detected [ 1.975897] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.975898] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 1.975899] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.975917] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.975987] hub 4-0:1.0: USB hub found [ 1.975990] hub 4-0:1.0: 2 ports detected [ 1.976049] usbcore: registered new interface driver usb-storage [ 1.976227] rtc_cmos 00:03: RTC can wake from S4 [ 1.976603] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.976718] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.976739] i2c /dev entries driver [ 1.977004] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.977023] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.978295] usbcore: registered new interface driver uvcvideo [ 1.978296] USB Video Class driver (1.1.1) [ 1.978907] nct6775: Found NCT6793D or compatible chip at 0x2e:0x290 [ 1.978909] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_GPE.HWM) (20170831/utaddress-247) [ 1.978911] ACPI: This conflict may cause random problems and system instability [ 1.978911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.979966] device-mapper: uevent: version 1.0.3 [ 1.980020] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.980112] intel_pstate: Intel P-state driver initializing [ 1.981037] intel_pstate: HWP enabled [ 1.981180] usbcore: registered new interface driver usbhid [ 1.981180] usbhid: USB HID core driver [ 1.981326] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 1.981374] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffa2ea2d00) [ 1.981388] usbcore: registered new interface driver snd-usb-audio [ 1.981459] NET: Registered protocol family 10 [ 1.981638] Segment Routing with IPv6 [ 1.981645] NET: Registered protocol family 17 [ 1.982247] microcode: sig=0x506e3, pf=0x2, revision=0xba [ 1.982505] microcode: Microcode Update Driver: v2.2. [ 1.982507] AVX2 version of gcm_enc/dec engaged. [ 1.982508] AES CTR mode by8 optimization enabled [ 1.984438] sched_clock: Marking stable (1984436284, 0)->(2002821379, -18385095) [ 1.984802] registered taskstats version 1 [ 1.984897] Btrfs loaded, crc32c=crc32c-intel [ 1.986366] rtc_cmos 00:03: setting system clock to 2018-02-12 05:38:09 UTC (1518413889) [ 1.986367] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.986367] EDD information not available. [ 1.986393] ALSA device list: [ 1.986394] No soundcards found. [ 1.986780] Freeing unused kernel memory: 892K [ 1.986781] Write protecting the kernel read-only data: 18432k [ 1.987084] Freeing unused kernel memory: 1984K [ 1.988327] Freeing unused kernel memory: 1428K [ 1.988402] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.988402] x86/mm: Checking user space page tables [ 1.988411] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.000401] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 2.000402] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.000403] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 2.000404] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.000405] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 2.000405] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.000406] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 2.000407] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 2.000408] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 2.015202] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 [ 2.015224] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 [ 2.015242] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 [ 2.015260] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 2.015280] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 2.015308] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 2.015329] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 2.015346] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 2.015366] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 2.015386] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 2.015415] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 2.243392] usb 1-9: new high-speed USB device number 2 using xhci_hcd [ 2.263681] clocksource: Switched to clocksource tsc [ 2.370447] [drm] RC6 on [ 2.384220] hub 1-9:1.0: USB hub found [ 2.384271] hub 1-9:1.0: 4 ports detected [ 2.507870] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.562446] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.562770] scsi host4: usb-storage 2-1:1.0 [ 2.650132] usb 1-10: new low-speed USB device number 3 using xhci_hcd [ 3.060132] usb 1-9.1: new full-speed USB device number 4 using xhci_hcd [ 3.177687] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.0001/input/input15 [ 3.233562] hid-generic 0003:041E:30D3.0001: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [ 3.323464] usb 1-9.2: new full-speed USB device number 5 using xhci_hcd [ 3.436383] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.0002/input/input16 [ 3.490221] hid-generic 0003:046D:C52B.0002: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [ 3.492183] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.0003/input/input17 [ 3.546898] hid-generic 0003:046D:C52B.0003: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [ 3.548441] hid-generic 0003:046D:C52B.0004: device has no listeners, quitting [ 3.580688] scsi 4:0:0:0: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 6 [ 3.588659] scsi 4:0:0:1: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 6 [ 3.621351] sd 4:0:0:1: [sde] Attached SCSI removable disk [ 3.626935] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 3.636798] usb 1-9.3: new low-speed USB device number 6 using xhci_hcd [ 3.728282] usb 1-9.3: Device not responding to setup address. [ 3.933948] usb 1-9.3: Device not responding to setup address. [ 4.140115] usb 1-9.3: device not accepting address 6, error -71 [ 4.436695] usb 1-9.3: new low-speed USB device number 7 using xhci_hcd [ 4.576525] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.0005/input/input18 [ 4.610376] nvme0n1: p1 p2 [ 4.630182] hid-generic 0003:04D9:0169.0005: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [ 4.652344] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.0006/input/input19 [ 4.706890] hid-generic 0003:04D9:0169.0006: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [ 4.780125] usb 1-9.4: new high-speed USB device number 8 using xhci_hcd [ 7.087630] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 7.087962] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input20 [ 7.264249] hid-generic 0003:0463:FFFF.0007: device has no listeners, quitting [ 7.324496] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 7.523174] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.523210] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.806057] EXT4-fs (dm-0): re-mounted. Opts: auto_da_alloc [ 7.806372] Adding 67108860k swap on /dev/mapper/sys-swap. Priority:-2 extents:1 across:67108860k SSDsc [ 7.818196] systemd-journald[698]: Received request to flush runtime journal from PID 1 [ 7.833039] random: crng init done [ 7.865710] EXT4-fs (dm-1): mounted filesystem without journal. Opts: dioread_nolock [ 7.872603] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: auto_da_alloc [ 7.882346] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.902557] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 7.984089] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 7.986348] BTRFS: device label backup devid 1 transid 7103 /dev/sdc1 [ 8.486798] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 8.959213] qemu-system-x86: sending ioctl 5326 to a partition! [ 9.340322] device-mapper: core: qemu-system-x86: sending ioctl 5326 to DM device without required privilege. [ 11.253460] vfio-pci 0000:01:00.1: enabling device (0000 -> 0002) [ 11.282430] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 11.282477] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 11.282876] IPv6: ADDRCONF(NETDEV_UP): macvlan0: link is not ready [ 12.290126] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready [ 13.335312] usb 1-9.4: reset high-speed USB device number 8 using xhci_hcd [ 27.918054] kvm [908]: vcpu0, guest rIP: 0xfffff806985262b6 ignored rdmsr: 0x611 [ 27.918057] kvm [908]: vcpu0, guest rIP: 0xfffff806985262cc ignored rdmsr: 0x641 [ 27.918059] kvm [908]: vcpu0, guest rIP: 0xfffff806985262e2 ignored rdmsr: 0x606 [ 27.918060] kvm [908]: vcpu0, guest rIP: 0xfffff8069852610e ignored rdmsr: 0x606 [ 27.918062] kvm [908]: vcpu0, guest rIP: 0xfffff8069852119c ignored rdmsr: 0x641 [ 27.918063] kvm [908]: vcpu0, guest rIP: 0xfffff806985211e7 ignored rdmsr: 0x611 [ 28.327747] kvm [908]: vcpu0, guest rIP: 0xfffff8069c7ad508 ignored rdmsr: 0x606 [ 28.327766] kvm [908]: vcpu0, guest rIP: 0xfffff8069c7ad539 ignored rdmsr: 0x639 [ 28.327767] kvm [908]: vcpu0, guest rIP: 0xfffff8069c7ae3ce ignored rdmsr: 0x606 [ 28.327768] kvm [908]: vcpu0, guest rIP: 0xfffff8069c7ae449 ignored rdmsr: 0x639 [ 28.332421] device macvtap0 entered promiscuous mode [ 28.332423] device enp0s31f6 entered promiscuous mode [ 40.616072] usb 1-9: USB disconnect, device number 2 [ 40.616073] usb 1-9.1: USB disconnect, device number 4 [ 40.668383] usb 1-9.2: USB disconnect, device number 5 [ 40.798646] usb 1-9.3: USB disconnect, device number 7 [ 40.975559] usb 1-9.4: USB disconnect, device number 8 [ 106.751540] usb 1-9: new high-speed USB device number 9 using xhci_hcd [ 106.927725] hub 1-9:1.0: USB hub found [ 106.927776] hub 1-9:1.0: 4 ports detected [ 107.228328] usb 1-9.1: new full-speed USB device number 10 using xhci_hcd [ 107.364369] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.0008/input/input21 [ 107.418471] hid-generic 0003:041E:30D3.0008: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [ 107.508407] usb 1-9.2: new full-speed USB device number 11 using xhci_hcd [ 107.620770] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.0009/input/input22 [ 107.675238] hid-generic 0003:046D:C52B.0009: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [ 107.677462] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.000A/input/input23 [ 107.731920] hid-generic 0003:046D:C52B.000A: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [ 107.733444] hid-generic 0003:046D:C52B.000B: device has no listeners, quitting [ 107.828538] usb 1-9.3: new low-speed USB device number 12 using xhci_hcd [ 107.968549] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.000C/input/input24 [ 108.051841] hid-generic 0003:04D9:0169.000C: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [ 108.075756] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.000D/input/input25 [ 108.131957] hid-generic 0003:04D9:0169.000D: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [ 108.208589] usb 1-9.4: new high-speed USB device number 13 using xhci_hcd [ 110.731632] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 110.732030] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input26 [ 135.262842] usb 1-9.4: reset high-speed USB device number 13 using xhci_hcd [ 7425.024010] usb 1-9: USB disconnect, device number 9 [ 7425.024011] usb 1-9.1: USB disconnect, device number 10 [ 7425.073022] usb 1-9.2: USB disconnect, device number 11 [ 7425.213055] usb 1-9.3: USB disconnect, device number 12 [ 7425.376311] usb 1-9.4: USB disconnect, device number 13 [ 8513.115816] BTRFS info (device sdc1): disk space caching is enabled [ 8513.115817] BTRFS info (device sdc1): has skinny extents [ 8543.796867] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: nodiscard [ 8689.566424] EXT4-fs (dm-7): orphan cleanup on readonly fs [ 8689.567295] EXT4-fs (dm-7): 2 orphan inodes deleted [ 8689.567295] EXT4-fs (dm-7): recovery complete [ 8689.567746] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: nodiscard [15818.032209] usb 1-9: new high-speed USB device number 14 using xhci_hcd [15818.172816] hub 1-9:1.0: USB hub found [15818.172840] hub 1-9:1.0: 4 ports detected [15818.472223] usb 1-9.1: new full-speed USB device number 15 using xhci_hcd [15818.588987] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.000E/input/input27 [15818.645580] hid-generic 0003:041E:30D3.000E: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [15818.738842] usb 1-9.2: new full-speed USB device number 16 using xhci_hcd [15818.854784] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.000F/input/input28 [15818.909017] hid-generic 0003:046D:C52B.000F: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [15818.911027] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.0010/input/input29 [15818.965716] hid-generic 0003:046D:C52B.0010: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [15818.967384] hid-generic 0003:046D:C52B.0011: device has no listeners, quitting [15819.065545] usb 1-9.3: new low-speed USB device number 17 using xhci_hcd [15819.208503] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.0012/input/input30 [15819.262301] hid-generic 0003:04D9:0169.0012: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [15819.284520] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.0013/input/input31 [15819.339057] hid-generic 0003:04D9:0169.0013: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [15819.412206] usb 1-9.4: new high-speed USB device number 18 using xhci_hcd [15821.892027] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [15821.892312] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input32 [16309.123297] usb 1-9: USB disconnect, device number 14 [16309.123298] usb 1-9.1: USB disconnect, device number 15 [16309.196661] usb 1-9.2: USB disconnect, device number 16 [16309.383438] usb 1-9.3: USB disconnect, device number 17 [16309.563450] usb 1-9.4: USB disconnect, device number 18 [40180.971659] usb 1-9: new high-speed USB device number 19 using xhci_hcd [40181.112610] hub 1-9:1.0: USB hub found [40181.112634] hub 1-9:1.0: 4 ports detected [40181.408213] usb 1-9.1: new full-speed USB device number 20 using xhci_hcd [40181.524630] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.0014/input/input33 [40181.578479] hid-generic 0003:041E:30D3.0014: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [40181.668341] usb 1-9.2: new full-speed USB device number 21 using xhci_hcd [40181.786794] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.0015/input/input34 [40181.841822] hid-generic 0003:046D:C52B.0015: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [40181.844027] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.0016/input/input35 [40181.898324] hid-generic 0003:046D:C52B.0016: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [40181.899794] hid-generic 0003:046D:C52B.0017: device has no listeners, quitting [40181.988337] usb 1-9.3: new low-speed USB device number 22 using xhci_hcd [40182.131472] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.0018/input/input36 [40182.184958] hid-generic 0003:04D9:0169.0018: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [40182.207534] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.0019/input/input37 [40182.261682] hid-generic 0003:04D9:0169.0019: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [40182.338339] usb 1-9.4: new high-speed USB device number 23 using xhci_hcd [40184.701239] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [40184.701490] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input38 [41437.338443] usb 1-9.4: reset high-speed USB device number 23 using xhci_hcd [41437.435120] usb 1-9.4: device firmware changed [41437.435240] usb 1-9.4: USB disconnect, device number 23 [41437.508175] usb 1-9.4: new high-speed USB device number 24 using xhci_hcd [41439.958262] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [41439.958534] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input39 [41481.709042] usb 1-9.4: reset high-speed USB device number 24 using xhci_hcd [43225.732003] usb 1-9: USB disconnect, device number 19 [43225.732004] usb 1-9.1: USB disconnect, device number 20 [43225.796968] usb 1-9.2: USB disconnect, device number 21 [43225.950316] usb 1-9.3: USB disconnect, device number 22 [43226.093655] usb 1-9.4: USB disconnect, device number 24 [82980.180058] usb 1-9: new high-speed USB device number 25 using xhci_hcd [82980.320746] hub 1-9:1.0: USB hub found [82980.320764] hub 1-9:1.0: 4 ports detected [82980.616727] usb 1-9.1: new full-speed USB device number 26 using xhci_hcd [82980.733685] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.001A/input/input40 [82980.790193] hid-generic 0003:041E:30D3.001A: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [82980.883397] usb 1-9.2: new full-speed USB device number 27 using xhci_hcd [82981.002820] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.001B/input/input41 [82981.056944] hid-generic 0003:046D:C52B.001B: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [82981.059375] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.001C/input/input42 [82981.113623] hid-generic 0003:046D:C52B.001C: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [82981.115292] hid-generic 0003:046D:C52B.001D: device has no listeners, quitting [82981.209744] usb 1-9.3: new low-speed USB device number 28 using xhci_hcd [82981.351458] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.001E/input/input43 [82981.406986] hid-generic 0003:04D9:0169.001E: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [82981.429514] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.001F/input/input44 [82981.483505] hid-generic 0003:04D9:0169.001F: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [82981.556820] usb 1-9.4: new high-speed USB device number 29 using xhci_hcd [82983.909859] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [82983.910139] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input45 [84574.474147] usb 1-9.4: reset high-speed USB device number 29 using xhci_hcd [84574.564174] usb 1-9.4: device firmware changed [84574.564292] usb 1-9.4: USB disconnect, device number 29 [84574.640690] usb 1-9.4: new high-speed USB device number 30 using xhci_hcd [84577.094170] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [84577.094687] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input46 [84800.604583] usb 1-9: USB disconnect, device number 25 [84800.604585] usb 1-9.1: USB disconnect, device number 26 [84800.642621] usb 1-9.2: USB disconnect, device number 27 [84800.782579] usb 1-9.3: USB disconnect, device number 28 [84800.915863] usb 1-9.4: USB disconnect, device number 30 [94913.678432] BTRFS info (device sdc1): disk space caching is enabled [94913.678432] BTRFS info (device sdc1): has skinny extents [94944.279600] EXT4-fs (dm-7): orphan cleanup on readonly fs [94944.281711] EXT4-fs (dm-7): 11 orphan inodes deleted [94944.281711] EXT4-fs (dm-7): recovery complete [94944.282168] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: nodiscard [95051.211690] EXT4-fs (dm-7): orphan cleanup on readonly fs [95051.212379] EXT4-fs (dm-7): 2 orphan inodes deleted [95051.212380] EXT4-fs (dm-7): recovery complete [95051.212764] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: nodiscard [96023.573814] usb 2-1: Disable of device-initiated U1 failed. [96023.577316] usb 2-1: Disable of device-initiated U2 failed. [96023.580900] usb 2-1: usb_reset_and_verify_device Failed to disable LTM . [96023.580904] xhci_hcd 0000:00:14.0: Cannot set link state. [96023.580938] usb usb2-port1: cannot disable (err = -32) [96023.749008] usb 2-1: USB disconnect, device number 2 [96024.153314] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd [96024.206738] usb-storage 2-1:1.0: USB Mass Storage device detected [96024.206860] scsi host4: usb-storage 2-1:1.0 [96025.229037] scsi 4:0:0:0: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 6 [96025.237303] scsi 4:0:0:1: Direct-Access Generic- USB3.0 CRW -SD 1.00 PQ: 0 ANSI: 6 [96025.288254] sd 4:0:0:1: [sde] Attached SCSI removable disk [96025.294111] sd 4:0:0:0: [sdd] Attached SCSI removable disk [100847.425040] usb 1-9: new high-speed USB device number 31 using xhci_hcd [100847.569221] hub 1-9:1.0: USB hub found [100847.569242] hub 1-9:1.0: 4 ports detected [100847.865026] usb 1-9.1: new full-speed USB device number 32 using xhci_hcd [100847.987389] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.0020/input/input47 [100848.041926] hid-generic 0003:041E:30D3.0020: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [100848.131668] usb 1-9.2: new full-speed USB device number 33 using xhci_hcd [100848.244542] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.0021/input/input48 [100848.298516] hid-generic 0003:046D:C52B.0021: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [100848.300611] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.0022/input/input49 [100848.355069] hid-generic 0003:046D:C52B.0022: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [100848.356546] hid-generic 0003:046D:C52B.0023: device has no listeners, quitting [100848.448333] usb 1-9.3: new low-speed USB device number 34 using xhci_hcd [100848.594424] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.0024/input/input50 [100848.648410] hid-generic 0003:04D9:0169.0024: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [100848.670508] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.0025/input/input51 [100848.725141] hid-generic 0003:04D9:0169.0025: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [100848.798371] usb 1-9.4: new high-speed USB device number 35 using xhci_hcd [100851.111850] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [100851.112450] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input52 [101075.646479] usb 1-9: USB disconnect, device number 31 [101075.646480] usb 1-9.1: USB disconnect, device number 32 [101075.713562] usb 1-9.2: USB disconnect, device number 33 [101075.873522] usb 1-9.3: USB disconnect, device number 34 [101076.025154] usb 1-9.4: USB disconnect, device number 35 [130179.735273] usb 1-9: new high-speed USB device number 36 using xhci_hcd [130179.875906] hub 1-9:1.0: USB hub found [130179.875924] hub 1-9:1.0: 4 ports detected [130180.172039] usb 1-9.1: new full-speed USB device number 37 using xhci_hcd [130180.289175] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.0026/input/input53 [130180.345446] hid-generic 0003:041E:30D3.0026: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [130180.435290] usb 1-9.2: new full-speed USB device number 38 using xhci_hcd [130180.548034] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.0027/input/input54 [130180.605519] hid-generic 0003:046D:C52B.0027: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [130180.607611] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.0028/input/input55 [130180.662020] hid-generic 0003:046D:C52B.0028: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [130180.663453] hid-generic 0003:046D:C52B.0029: device has no listeners, quitting [130180.751921] usb 1-9.3: new low-speed USB device number 39 using xhci_hcd [130180.894428] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.002A/input/input56 [130180.948783] hid-generic 0003:04D9:0169.002A: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [130180.971450] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.002B/input/input57 [130181.025400] hid-generic 0003:04D9:0169.002B: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [130181.101923] usb 1-9.4: new high-speed USB device number 40 using xhci_hcd [130183.562024] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [130183.562293] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input58 [130940.479310] [drm] GPU HANG: ecode 9:1:0xfefffffe, reason: No progress on bcs0, action: reset [130940.479311] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [130940.479311] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [130940.479311] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [130940.479312] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [130940.479312] [drm] GPU crash dump saved to /sys/class/drm/card0/error [130940.479339] i915 0000:00:02.0: Resetting chip after gpu hang [130940.481477] [drm] RC6 on [130940.483438] [drm] HuC: Loaded firmware i915/skl_huc_ver01_07_1398.bin (version 1.7) [130940.485464] [drm] GuC: Loaded firmware i915/skl_guc_ver6_1.bin (version 6.1) [130940.485541] i915 0000:00:02.0: GuC submission enabled (firmware i915/skl_guc_ver6_1.bin [version 6.1]) [131178.835206] usb 1-9.4: reset high-speed USB device number 40 using xhci_hcd [131666.680802] usb 1-9: USB disconnect, device number 36 [131666.680803] usb 1-9.1: USB disconnect, device number 37 [131666.731601] usb 1-9.2: USB disconnect, device number 38 [131666.891677] usb 1-9.3: USB disconnect, device number 39 [131667.075019] usb 1-9.4: USB disconnect, device number 40 [133401.261554] usb 1-9: new high-speed USB device number 41 using xhci_hcd [133401.402672] hub 1-9:1.0: USB hub found [133401.402691] hub 1-9:1.0: 4 ports detected [133401.701659] usb 1-9.1: new full-speed USB device number 42 using xhci_hcd [133401.818446] input: HID 041e:30d3 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.1/1-9.1:1.3/0003:041E:30D3.002C/input/input59 [133401.875160] hid-generic 0003:041E:30D3.002C: input: USB HID v1.00 Device [HID 041e:30d3] on usb-0000:00:14.0-9.1/input3 [133401.968252] usb 1-9.2: new full-speed USB device number 43 using xhci_hcd [133402.085367] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:046D:C52B.002D/input/input60 [133402.141651] hid-generic 0003:046D:C52B.002D: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input0 [133402.143828] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.1/0003:046D:C52B.002E/input/input61 [133402.201601] hid-generic 0003:046D:C52B.002E: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9.2/input1 [133402.203305] hid-generic 0003:046D:C52B.002F: device has no listeners, quitting [133402.298358] usb 1-9.3: new low-speed USB device number 44 using xhci_hcd [133402.437455] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:04D9:0169.0030/input/input62 [133402.491981] hid-generic 0003:04D9:0169.0030: input: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-9.3/input0 [133402.514482] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:04D9:0169.0031/input/input63 [133402.568514] hid-generic 0003:04D9:0169.0031: input: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-9.3/input1 [133402.641623] usb 1-9.4: new high-speed USB device number 45 using xhci_hcd [133405.128166] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [133405.128509] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.4/1-9.4:1.0/input/input64